1 /* QLogic qed NIC Driver
2 * Copyright (c) 2015-2017 QLogic Corporation
4 * This software is available to you under a choice of one of two
5 * licenses. You may choose to be licensed under the terms of the GNU
6 * General Public License (GPL) Version 2, available from the file
7 * COPYING in the main directory of this source tree, or the
8 * OpenIB.org BSD license below:
10 * Redistribution and use in source and binary forms, with or
11 * without modification, are permitted provided that the following
14 * - Redistributions of source code must retain the above
15 * copyright notice, this list of conditions and the following
18 * - Redistributions in binary form must reproduce the above
19 * copyright notice, this list of conditions and the following
20 * disclaimer in the documentation and /or other materials
21 * provided with the distribution.
23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
34 #include <linux/types.h>
36 #include <linux/kernel.h>
37 #include <linux/slab.h>
38 #include <linux/qed/qed_eth_if.h>
43 struct qed_sge_tpa_params
{
44 u8 max_buffers_per_cqe
;
49 u8 tpa_ipv4_tunn_en_flg
;
50 u8 tpa_ipv6_tunn_en_flg
;
52 u8 update_tpa_param_flg
;
54 u8 tpa_hdr_data_split_flg
;
55 u8 tpa_gro_consistent_flg
;
58 u16 tpa_min_size_to_start
;
59 u16 tpa_min_size_to_cont
;
62 enum qed_filter_opcode
{
66 QED_FILTER_REPLACE
, /* Delete all MACs and add new one instead */
67 QED_FILTER_FLUSH
, /* Removes all filters */
70 enum qed_filter_ucast_type
{
75 QED_FILTER_INNER_VLAN
,
76 QED_FILTER_INNER_PAIR
,
77 QED_FILTER_INNER_MAC_VNI_PAIR
,
78 QED_FILTER_MAC_VNI_PAIR
,
82 struct qed_filter_ucast
{
83 enum qed_filter_opcode opcode
;
84 enum qed_filter_ucast_type type
;
88 u8 vport_to_remove_from
;
89 unsigned char mac
[ETH_ALEN
];
95 struct qed_filter_mcast
{
96 /* MOVE is not supported for multicast */
97 enum qed_filter_opcode opcode
;
99 u8 vport_to_remove_from
;
101 #define QED_MAX_MC_ADDRS 64
102 unsigned char mac
[QED_MAX_MC_ADDRS
][ETH_ALEN
];
106 * @brief qed_eth_rx_queue_stop - This ramrod closes an Rx queue
109 * @param p_rxq Handler of queue to close
110 * @param eq_completion_only If True completion will be on
111 * EQe, if False completion will be
112 * on EQe if p_hwfn opaque
113 * different from the RXQ opaque
115 * @param cqe_completion If True completion will be
120 qed_eth_rx_queue_stop(struct qed_hwfn
*p_hwfn
,
122 bool eq_completion_only
, bool cqe_completion
);
125 * @brief qed_eth_tx_queue_stop - closes a Tx queue
128 * @param p_txq - handle to Tx queue needed to be closed
132 int qed_eth_tx_queue_stop(struct qed_hwfn
*p_hwfn
, void *p_txq
);
141 struct qed_sp_vport_start_params
{
142 enum qed_tpa_mode tpa_mode
;
143 bool remove_inner_vlan
;
147 u8 max_buffers_per_cqe
;
156 int qed_sp_eth_vport_start(struct qed_hwfn
*p_hwfn
,
157 struct qed_sp_vport_start_params
*p_params
);
159 struct qed_rss_params
{
160 u8 update_rss_config
;
163 u8 update_rss_capabilities
;
164 u8 update_rss_ind_table
;
167 u8 rss_table_size_log
;
168 u16 rss_ind_table
[QED_RSS_IND_TABLE_SIZE
];
169 u32 rss_key
[QED_RSS_KEY_SIZE
];
172 struct qed_filter_accept_flags
{
173 u8 update_rx_mode_config
;
174 u8 update_tx_mode_config
;
177 #define QED_ACCEPT_NONE 0x01
178 #define QED_ACCEPT_UCAST_MATCHED 0x02
179 #define QED_ACCEPT_UCAST_UNMATCHED 0x04
180 #define QED_ACCEPT_MCAST_MATCHED 0x08
181 #define QED_ACCEPT_MCAST_UNMATCHED 0x10
182 #define QED_ACCEPT_BCAST 0x20
185 struct qed_sp_vport_update_params
{
188 u8 update_vport_active_rx_flg
;
189 u8 vport_active_rx_flg
;
190 u8 update_vport_active_tx_flg
;
191 u8 vport_active_tx_flg
;
192 u8 update_inner_vlan_removal_flg
;
193 u8 inner_vlan_removal_flg
;
194 u8 silent_vlan_removal_flg
;
195 u8 update_default_vlan_enable_flg
;
196 u8 default_vlan_enable_flg
;
197 u8 update_default_vlan_flg
;
199 u8 update_tx_switching_flg
;
201 u8 update_approx_mcast_flg
;
202 u8 update_anti_spoofing_en_flg
;
204 u8 update_accept_any_vlan_flg
;
206 unsigned long bins
[8];
207 struct qed_rss_params
*rss_params
;
208 struct qed_filter_accept_flags accept_flags
;
209 struct qed_sge_tpa_params
*sge_tpa_params
;
212 int qed_sp_vport_update(struct qed_hwfn
*p_hwfn
,
213 struct qed_sp_vport_update_params
*p_params
,
214 enum spq_mode comp_mode
,
215 struct qed_spq_comp_cb
*p_comp_data
);
218 * @brief qed_sp_vport_stop -
220 * This ramrod closes a VPort after all its RX and TX queues are terminated.
221 * An Assert is generated if any queues are left open.
225 * @param vport_id VPort ID
229 int qed_sp_vport_stop(struct qed_hwfn
*p_hwfn
, u16 opaque_fid
, u8 vport_id
);
231 int qed_sp_eth_filter_ucast(struct qed_hwfn
*p_hwfn
,
233 struct qed_filter_ucast
*p_filter_cmd
,
234 enum spq_mode comp_mode
,
235 struct qed_spq_comp_cb
*p_comp_data
);
238 * @brief qed_sp_rx_eth_queues_update -
240 * This ramrod updates an RX queue. It is used for setting the active state
241 * of the queue and updating the TPA and SGE parameters.
243 * @note At the moment - only used by non-linux VFs.
246 * @param pp_rxq_handlers An array of queue handlers to be updated.
247 * @param num_rxqs number of queues to update.
248 * @param complete_cqe_flg Post completion to the CQE Ring if set
249 * @param complete_event_flg Post completion to the Event Ring if set
257 qed_sp_eth_rx_queues_update(struct qed_hwfn
*p_hwfn
,
258 void **pp_rxq_handlers
,
261 u8 complete_event_flg
,
262 enum spq_mode comp_mode
,
263 struct qed_spq_comp_cb
*p_comp_data
);
265 void qed_get_vport_stats(struct qed_dev
*cdev
, struct qed_eth_stats
*stats
);
267 void qed_reset_vport_stats(struct qed_dev
*cdev
);
269 struct qed_queue_cid
{
270 /* 'Relative' is a relative term ;-). Usually the indices [not counting
271 * SBs] would be PF-relative, but there are some cases where that isn't
272 * the case - specifically for a PF configuring its VF indices it's
273 * possible some fields [E.g., stats-id] in 'rel' would already be abs.
275 struct qed_queue_start_common_params rel
;
276 struct qed_queue_start_common_params abs
;
280 /* VFs queues are mapped differently, so we need to know the
281 * relative queue associated with them [0-based].
282 * Notice this is relevant on the *PF* queue-cid of its VF's queues,
283 * and not on the VF itself.
288 /* Legacy VFs might have Rx producer located elsewhere */
292 void qed_eth_queue_cid_release(struct qed_hwfn
*p_hwfn
,
293 struct qed_queue_cid
*p_cid
);
295 struct qed_queue_cid
*_qed_eth_queue_to_cid(struct qed_hwfn
*p_hwfn
,
299 struct qed_queue_start_common_params
303 qed_sp_eth_vport_start(struct qed_hwfn
*p_hwfn
,
304 struct qed_sp_vport_start_params
*p_params
);
307 * @brief - Starts an Rx queue, when queue_cid is already prepared
311 * @param bd_max_bytes
312 * @param bd_chain_phys_addr
313 * @param cqe_pbl_addr
314 * @param cqe_pbl_size
319 qed_eth_rxq_start_ramrod(struct qed_hwfn
*p_hwfn
,
320 struct qed_queue_cid
*p_cid
,
322 dma_addr_t bd_chain_phys_addr
,
323 dma_addr_t cqe_pbl_addr
, u16 cqe_pbl_size
);
326 * @brief - Starts a Tx queue, where queue_cid is already prepared
332 * @param p_pq_params - parameters for choosing the PQ for this Tx queue
337 qed_eth_txq_start_ramrod(struct qed_hwfn
*p_hwfn
,
338 struct qed_queue_cid
*p_cid
,
339 dma_addr_t pbl_addr
, u16 pbl_size
, u16 pq_id
);
341 u8
qed_mcast_bin_from_mac(u8
*mac
);
343 #endif /* _QED_L2_H */