]> git.proxmox.com Git - mirror_ubuntu-focal-kernel.git/blob - drivers/net/ethernet/smsc/epic100.c
Merge tag 'sh-pfc-for-v5.1-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git...
[mirror_ubuntu-focal-kernel.git] / drivers / net / ethernet / smsc / epic100.c
1 /* epic100.c: A SMC 83c170 EPIC/100 Fast Ethernet driver for Linux. */
2 /*
3 Written/copyright 1997-2001 by Donald Becker.
4
5 This software may be used and distributed according to the terms of
6 the GNU General Public License (GPL), incorporated herein by reference.
7 Drivers based on or derived from this code fall under the GPL and must
8 retain the authorship, copyright and license notice. This file is not
9 a complete program and may only be used when the entire operating
10 system is licensed under the GPL.
11
12 This driver is for the SMC83c170/175 "EPIC" series, as used on the
13 SMC EtherPower II 9432 PCI adapter, and several CardBus cards.
14
15 The author may be reached as becker@scyld.com, or C/O
16 Scyld Computing Corporation
17 410 Severn Ave., Suite 210
18 Annapolis MD 21403
19
20 Information and updates available at
21 http://www.scyld.com/network/epic100.html
22 [this link no longer provides anything useful -jgarzik]
23
24 ---------------------------------------------------------------------
25
26 */
27
28 #define DRV_NAME "epic100"
29 #define DRV_VERSION "2.1"
30 #define DRV_RELDATE "Sept 11, 2006"
31
32 /* The user-configurable values.
33 These may be modified when a driver module is loaded.*/
34
35 static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
36
37 /* Used to pass the full-duplex flag, etc. */
38 #define MAX_UNITS 8 /* More are supported, limit only on options */
39 static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
40 static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
41
42 /* Set the copy breakpoint for the copy-only-tiny-frames scheme.
43 Setting to > 1518 effectively disables this feature. */
44 static int rx_copybreak;
45
46 /* Operational parameters that are set at compile time. */
47
48 /* Keep the ring sizes a power of two for operational efficiency.
49 The compiler will convert <unsigned>'%'<2^N> into a bit mask.
50 Making the Tx ring too large decreases the effectiveness of channel
51 bonding and packet priority.
52 There are no ill effects from too-large receive rings. */
53 #define TX_RING_SIZE 256
54 #define TX_QUEUE_LEN 240 /* Limit ring entries actually used. */
55 #define RX_RING_SIZE 256
56 #define TX_TOTAL_SIZE TX_RING_SIZE*sizeof(struct epic_tx_desc)
57 #define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct epic_rx_desc)
58
59 /* Operational parameters that usually are not changed. */
60 /* Time in jiffies before concluding the transmitter is hung. */
61 #define TX_TIMEOUT (2*HZ)
62
63 #define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
64
65 /* Bytes transferred to chip before transmission starts. */
66 /* Initial threshold, increased on underflow, rounded down to 4 byte units. */
67 #define TX_FIFO_THRESH 256
68 #define RX_FIFO_THRESH 1 /* 0-3, 0==32, 64,96, or 3==128 bytes */
69
70 #include <linux/module.h>
71 #include <linux/kernel.h>
72 #include <linux/string.h>
73 #include <linux/timer.h>
74 #include <linux/errno.h>
75 #include <linux/ioport.h>
76 #include <linux/interrupt.h>
77 #include <linux/pci.h>
78 #include <linux/delay.h>
79 #include <linux/netdevice.h>
80 #include <linux/etherdevice.h>
81 #include <linux/skbuff.h>
82 #include <linux/init.h>
83 #include <linux/spinlock.h>
84 #include <linux/ethtool.h>
85 #include <linux/mii.h>
86 #include <linux/crc32.h>
87 #include <linux/bitops.h>
88 #include <asm/io.h>
89 #include <linux/uaccess.h>
90 #include <asm/byteorder.h>
91
92 /* These identify the driver base version and may not be removed. */
93 static char version[] =
94 DRV_NAME ".c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>";
95 static char version2[] =
96 " (unofficial 2.4.x kernel port, version " DRV_VERSION ", " DRV_RELDATE ")";
97
98 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
99 MODULE_DESCRIPTION("SMC 83c170 EPIC series Ethernet driver");
100 MODULE_LICENSE("GPL");
101
102 module_param(debug, int, 0);
103 module_param(rx_copybreak, int, 0);
104 module_param_array(options, int, NULL, 0);
105 module_param_array(full_duplex, int, NULL, 0);
106 MODULE_PARM_DESC(debug, "EPIC/100 debug level (0-5)");
107 MODULE_PARM_DESC(options, "EPIC/100: Bits 0-3: media type, bit 4: full duplex");
108 MODULE_PARM_DESC(rx_copybreak, "EPIC/100 copy breakpoint for copy-only-tiny-frames");
109 MODULE_PARM_DESC(full_duplex, "EPIC/100 full duplex setting(s) (1)");
110
111 /*
112 Theory of Operation
113
114 I. Board Compatibility
115
116 This device driver is designed for the SMC "EPIC/100", the SMC
117 single-chip Ethernet controllers for PCI. This chip is used on
118 the SMC EtherPower II boards.
119
120 II. Board-specific settings
121
122 PCI bus devices are configured by the system at boot time, so no jumpers
123 need to be set on the board. The system BIOS will assign the
124 PCI INTA signal to a (preferably otherwise unused) system IRQ line.
125 Note: Kernel versions earlier than 1.3.73 do not support shared PCI
126 interrupt lines.
127
128 III. Driver operation
129
130 IIIa. Ring buffers
131
132 IVb. References
133
134 http://www.smsc.com/media/Downloads_Public/discontinued/83c171.pdf
135 http://www.smsc.com/media/Downloads_Public/discontinued/83c175.pdf
136 http://scyld.com/expert/NWay.html
137 http://www.national.com/pf/DP/DP83840A.html
138
139 IVc. Errata
140
141 */
142
143
144 enum chip_capability_flags { MII_PWRDWN=1, TYPE2_INTR=2, NO_MII=4 };
145
146 #define EPIC_TOTAL_SIZE 0x100
147 #define USE_IO_OPS 1
148
149 #ifdef USE_IO_OPS
150 #define EPIC_BAR 0
151 #else
152 #define EPIC_BAR 1
153 #endif
154
155 typedef enum {
156 SMSC_83C170_0,
157 SMSC_83C170,
158 SMSC_83C175,
159 } chip_t;
160
161
162 struct epic_chip_info {
163 const char *name;
164 int drv_flags; /* Driver use, intended as capability flags. */
165 };
166
167
168 /* indexed by chip_t */
169 static const struct epic_chip_info pci_id_tbl[] = {
170 { "SMSC EPIC/100 83c170", TYPE2_INTR | NO_MII | MII_PWRDWN },
171 { "SMSC EPIC/100 83c170", TYPE2_INTR },
172 { "SMSC EPIC/C 83c175", TYPE2_INTR | MII_PWRDWN },
173 };
174
175
176 static const struct pci_device_id epic_pci_tbl[] = {
177 { 0x10B8, 0x0005, 0x1092, 0x0AB4, 0, 0, SMSC_83C170_0 },
178 { 0x10B8, 0x0005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SMSC_83C170 },
179 { 0x10B8, 0x0006, PCI_ANY_ID, PCI_ANY_ID,
180 PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, SMSC_83C175 },
181 { 0,}
182 };
183 MODULE_DEVICE_TABLE (pci, epic_pci_tbl);
184
185 #define ew16(reg, val) iowrite16(val, ioaddr + (reg))
186 #define ew32(reg, val) iowrite32(val, ioaddr + (reg))
187 #define er8(reg) ioread8(ioaddr + (reg))
188 #define er16(reg) ioread16(ioaddr + (reg))
189 #define er32(reg) ioread32(ioaddr + (reg))
190
191 /* Offsets to registers, using the (ugh) SMC names. */
192 enum epic_registers {
193 COMMAND=0, INTSTAT=4, INTMASK=8, GENCTL=0x0C, NVCTL=0x10, EECTL=0x14,
194 PCIBurstCnt=0x18,
195 TEST1=0x1C, CRCCNT=0x20, ALICNT=0x24, MPCNT=0x28, /* Rx error counters. */
196 MIICtrl=0x30, MIIData=0x34, MIICfg=0x38,
197 LAN0=64, /* MAC address. */
198 MC0=80, /* Multicast filter table. */
199 RxCtrl=96, TxCtrl=112, TxSTAT=0x74,
200 PRxCDAR=0x84, RxSTAT=0xA4, EarlyRx=0xB0, PTxCDAR=0xC4, TxThresh=0xDC,
201 };
202
203 /* Interrupt register bits, using my own meaningful names. */
204 enum IntrStatus {
205 TxIdle=0x40000, RxIdle=0x20000, IntrSummary=0x010000,
206 PCIBusErr170=0x7000, PCIBusErr175=0x1000, PhyEvent175=0x8000,
207 RxStarted=0x0800, RxEarlyWarn=0x0400, CntFull=0x0200, TxUnderrun=0x0100,
208 TxEmpty=0x0080, TxDone=0x0020, RxError=0x0010,
209 RxOverflow=0x0008, RxFull=0x0004, RxHeader=0x0002, RxDone=0x0001,
210 };
211 enum CommandBits {
212 StopRx=1, StartRx=2, TxQueued=4, RxQueued=8,
213 StopTxDMA=0x20, StopRxDMA=0x40, RestartTx=0x80,
214 };
215
216 #define EpicRemoved 0xffffffff /* Chip failed or removed (CardBus) */
217
218 #define EpicNapiEvent (TxEmpty | TxDone | \
219 RxDone | RxStarted | RxEarlyWarn | RxOverflow | RxFull)
220 #define EpicNormalEvent (0x0000ffff & ~EpicNapiEvent)
221
222 static const u16 media2miictl[16] = {
223 0, 0x0C00, 0x0C00, 0x2000, 0x0100, 0x2100, 0, 0,
224 0, 0, 0, 0, 0, 0, 0, 0 };
225
226 /*
227 * The EPIC100 Rx and Tx buffer descriptors. Note that these
228 * really ARE host-endian; it's not a misannotation. We tell
229 * the card to byteswap them internally on big-endian hosts -
230 * look for #ifdef __BIG_ENDIAN in epic_open().
231 */
232
233 struct epic_tx_desc {
234 u32 txstatus;
235 u32 bufaddr;
236 u32 buflength;
237 u32 next;
238 };
239
240 struct epic_rx_desc {
241 u32 rxstatus;
242 u32 bufaddr;
243 u32 buflength;
244 u32 next;
245 };
246
247 enum desc_status_bits {
248 DescOwn=0x8000,
249 };
250
251 #define PRIV_ALIGN 15 /* Required alignment mask */
252 struct epic_private {
253 struct epic_rx_desc *rx_ring;
254 struct epic_tx_desc *tx_ring;
255 /* The saved address of a sent-in-place packet/buffer, for skfree(). */
256 struct sk_buff* tx_skbuff[TX_RING_SIZE];
257 /* The addresses of receive-in-place skbuffs. */
258 struct sk_buff* rx_skbuff[RX_RING_SIZE];
259
260 dma_addr_t tx_ring_dma;
261 dma_addr_t rx_ring_dma;
262
263 /* Ring pointers. */
264 spinlock_t lock; /* Group with Tx control cache line. */
265 spinlock_t napi_lock;
266 struct napi_struct napi;
267 unsigned int cur_tx, dirty_tx;
268
269 unsigned int cur_rx, dirty_rx;
270 u32 irq_mask;
271 unsigned int rx_buf_sz; /* Based on MTU+slack. */
272
273 void __iomem *ioaddr;
274 struct pci_dev *pci_dev; /* PCI bus location. */
275 int chip_id, chip_flags;
276
277 struct timer_list timer; /* Media selection timer. */
278 int tx_threshold;
279 unsigned char mc_filter[8];
280 signed char phys[4]; /* MII device addresses. */
281 u16 advertising; /* NWay media advertisement */
282 int mii_phy_cnt;
283 struct mii_if_info mii;
284 unsigned int tx_full:1; /* The Tx queue is full. */
285 unsigned int default_port:4; /* Last dev->if_port value. */
286 };
287
288 static int epic_open(struct net_device *dev);
289 static int read_eeprom(struct epic_private *, int);
290 static int mdio_read(struct net_device *dev, int phy_id, int location);
291 static void mdio_write(struct net_device *dev, int phy_id, int loc, int val);
292 static void epic_restart(struct net_device *dev);
293 static void epic_timer(struct timer_list *t);
294 static void epic_tx_timeout(struct net_device *dev);
295 static void epic_init_ring(struct net_device *dev);
296 static netdev_tx_t epic_start_xmit(struct sk_buff *skb,
297 struct net_device *dev);
298 static int epic_rx(struct net_device *dev, int budget);
299 static int epic_poll(struct napi_struct *napi, int budget);
300 static irqreturn_t epic_interrupt(int irq, void *dev_instance);
301 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
302 static const struct ethtool_ops netdev_ethtool_ops;
303 static int epic_close(struct net_device *dev);
304 static struct net_device_stats *epic_get_stats(struct net_device *dev);
305 static void set_rx_mode(struct net_device *dev);
306
307 static const struct net_device_ops epic_netdev_ops = {
308 .ndo_open = epic_open,
309 .ndo_stop = epic_close,
310 .ndo_start_xmit = epic_start_xmit,
311 .ndo_tx_timeout = epic_tx_timeout,
312 .ndo_get_stats = epic_get_stats,
313 .ndo_set_rx_mode = set_rx_mode,
314 .ndo_do_ioctl = netdev_ioctl,
315 .ndo_set_mac_address = eth_mac_addr,
316 .ndo_validate_addr = eth_validate_addr,
317 };
318
319 static int epic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
320 {
321 static int card_idx = -1;
322 void __iomem *ioaddr;
323 int chip_idx = (int) ent->driver_data;
324 struct net_device *dev;
325 struct epic_private *ep;
326 int i, ret, option = 0, duplex = 0;
327 void *ring_space;
328 dma_addr_t ring_dma;
329
330 /* when built into the kernel, we only print version if device is found */
331 #ifndef MODULE
332 pr_info_once("%s%s\n", version, version2);
333 #endif
334
335 card_idx++;
336
337 ret = pci_enable_device(pdev);
338 if (ret)
339 goto out;
340
341 if (pci_resource_len(pdev, 0) < EPIC_TOTAL_SIZE) {
342 dev_err(&pdev->dev, "no PCI region space\n");
343 ret = -ENODEV;
344 goto err_out_disable;
345 }
346
347 pci_set_master(pdev);
348
349 ret = pci_request_regions(pdev, DRV_NAME);
350 if (ret < 0)
351 goto err_out_disable;
352
353 ret = -ENOMEM;
354
355 dev = alloc_etherdev(sizeof (*ep));
356 if (!dev)
357 goto err_out_free_res;
358
359 SET_NETDEV_DEV(dev, &pdev->dev);
360
361 ioaddr = pci_iomap(pdev, EPIC_BAR, 0);
362 if (!ioaddr) {
363 dev_err(&pdev->dev, "ioremap failed\n");
364 goto err_out_free_netdev;
365 }
366
367 pci_set_drvdata(pdev, dev);
368 ep = netdev_priv(dev);
369 ep->ioaddr = ioaddr;
370 ep->mii.dev = dev;
371 ep->mii.mdio_read = mdio_read;
372 ep->mii.mdio_write = mdio_write;
373 ep->mii.phy_id_mask = 0x1f;
374 ep->mii.reg_num_mask = 0x1f;
375
376 ring_space = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &ring_dma);
377 if (!ring_space)
378 goto err_out_iounmap;
379 ep->tx_ring = ring_space;
380 ep->tx_ring_dma = ring_dma;
381
382 ring_space = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &ring_dma);
383 if (!ring_space)
384 goto err_out_unmap_tx;
385 ep->rx_ring = ring_space;
386 ep->rx_ring_dma = ring_dma;
387
388 if (dev->mem_start) {
389 option = dev->mem_start;
390 duplex = (dev->mem_start & 16) ? 1 : 0;
391 } else if (card_idx >= 0 && card_idx < MAX_UNITS) {
392 if (options[card_idx] >= 0)
393 option = options[card_idx];
394 if (full_duplex[card_idx] >= 0)
395 duplex = full_duplex[card_idx];
396 }
397
398 spin_lock_init(&ep->lock);
399 spin_lock_init(&ep->napi_lock);
400
401 /* Bring the chip out of low-power mode. */
402 ew32(GENCTL, 0x4200);
403 /* Magic?! If we don't set this bit the MII interface won't work. */
404 /* This magic is documented in SMSC app note 7.15 */
405 for (i = 16; i > 0; i--)
406 ew32(TEST1, 0x0008);
407
408 /* Turn on the MII transceiver. */
409 ew32(MIICfg, 0x12);
410 if (chip_idx == 1)
411 ew32(NVCTL, (er32(NVCTL) & ~0x003c) | 0x4800);
412 ew32(GENCTL, 0x0200);
413
414 /* Note: the '175 does not have a serial EEPROM. */
415 for (i = 0; i < 3; i++)
416 ((__le16 *)dev->dev_addr)[i] = cpu_to_le16(er16(LAN0 + i*4));
417
418 if (debug > 2) {
419 dev_dbg(&pdev->dev, "EEPROM contents:\n");
420 for (i = 0; i < 64; i++)
421 pr_cont(" %4.4x%s", read_eeprom(ep, i),
422 i % 16 == 15 ? "\n" : "");
423 }
424
425 ep->pci_dev = pdev;
426 ep->chip_id = chip_idx;
427 ep->chip_flags = pci_id_tbl[chip_idx].drv_flags;
428 ep->irq_mask =
429 (ep->chip_flags & TYPE2_INTR ? PCIBusErr175 : PCIBusErr170)
430 | CntFull | TxUnderrun | EpicNapiEvent;
431
432 /* Find the connected MII xcvrs.
433 Doing this in open() would allow detecting external xcvrs later, but
434 takes much time and no cards have external MII. */
435 {
436 int phy, phy_idx = 0;
437 for (phy = 1; phy < 32 && phy_idx < sizeof(ep->phys); phy++) {
438 int mii_status = mdio_read(dev, phy, MII_BMSR);
439 if (mii_status != 0xffff && mii_status != 0x0000) {
440 ep->phys[phy_idx++] = phy;
441 dev_info(&pdev->dev,
442 "MII transceiver #%d control "
443 "%4.4x status %4.4x.\n",
444 phy, mdio_read(dev, phy, 0), mii_status);
445 }
446 }
447 ep->mii_phy_cnt = phy_idx;
448 if (phy_idx != 0) {
449 phy = ep->phys[0];
450 ep->mii.advertising = mdio_read(dev, phy, MII_ADVERTISE);
451 dev_info(&pdev->dev,
452 "Autonegotiation advertising %4.4x link "
453 "partner %4.4x.\n",
454 ep->mii.advertising, mdio_read(dev, phy, 5));
455 } else if ( ! (ep->chip_flags & NO_MII)) {
456 dev_warn(&pdev->dev,
457 "***WARNING***: No MII transceiver found!\n");
458 /* Use the known PHY address of the EPII. */
459 ep->phys[0] = 3;
460 }
461 ep->mii.phy_id = ep->phys[0];
462 }
463
464 /* Turn off the MII xcvr (175 only!), leave the chip in low-power mode. */
465 if (ep->chip_flags & MII_PWRDWN)
466 ew32(NVCTL, er32(NVCTL) & ~0x483c);
467 ew32(GENCTL, 0x0008);
468
469 /* The lower four bits are the media type. */
470 if (duplex) {
471 ep->mii.force_media = ep->mii.full_duplex = 1;
472 dev_info(&pdev->dev, "Forced full duplex requested.\n");
473 }
474 dev->if_port = ep->default_port = option;
475
476 /* The Epic-specific entries in the device structure. */
477 dev->netdev_ops = &epic_netdev_ops;
478 dev->ethtool_ops = &netdev_ethtool_ops;
479 dev->watchdog_timeo = TX_TIMEOUT;
480 netif_napi_add(dev, &ep->napi, epic_poll, 64);
481
482 ret = register_netdev(dev);
483 if (ret < 0)
484 goto err_out_unmap_rx;
485
486 netdev_info(dev, "%s at %lx, IRQ %d, %pM\n",
487 pci_id_tbl[chip_idx].name,
488 (long)pci_resource_start(pdev, EPIC_BAR), pdev->irq,
489 dev->dev_addr);
490
491 out:
492 return ret;
493
494 err_out_unmap_rx:
495 pci_free_consistent(pdev, RX_TOTAL_SIZE, ep->rx_ring, ep->rx_ring_dma);
496 err_out_unmap_tx:
497 pci_free_consistent(pdev, TX_TOTAL_SIZE, ep->tx_ring, ep->tx_ring_dma);
498 err_out_iounmap:
499 pci_iounmap(pdev, ioaddr);
500 err_out_free_netdev:
501 free_netdev(dev);
502 err_out_free_res:
503 pci_release_regions(pdev);
504 err_out_disable:
505 pci_disable_device(pdev);
506 goto out;
507 }
508
509 /* Serial EEPROM section. */
510
511 /* EEPROM_Ctrl bits. */
512 #define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
513 #define EE_CS 0x02 /* EEPROM chip select. */
514 #define EE_DATA_WRITE 0x08 /* EEPROM chip data in. */
515 #define EE_WRITE_0 0x01
516 #define EE_WRITE_1 0x09
517 #define EE_DATA_READ 0x10 /* EEPROM chip data out. */
518 #define EE_ENB (0x0001 | EE_CS)
519
520 /* Delay between EEPROM clock transitions.
521 This serves to flush the operation to the PCI bus.
522 */
523
524 #define eeprom_delay() er32(EECTL)
525
526 /* The EEPROM commands include the alway-set leading bit. */
527 #define EE_WRITE_CMD (5 << 6)
528 #define EE_READ64_CMD (6 << 6)
529 #define EE_READ256_CMD (6 << 8)
530 #define EE_ERASE_CMD (7 << 6)
531
532 static void epic_disable_int(struct net_device *dev, struct epic_private *ep)
533 {
534 void __iomem *ioaddr = ep->ioaddr;
535
536 ew32(INTMASK, 0x00000000);
537 }
538
539 static inline void __epic_pci_commit(void __iomem *ioaddr)
540 {
541 #ifndef USE_IO_OPS
542 er32(INTMASK);
543 #endif
544 }
545
546 static inline void epic_napi_irq_off(struct net_device *dev,
547 struct epic_private *ep)
548 {
549 void __iomem *ioaddr = ep->ioaddr;
550
551 ew32(INTMASK, ep->irq_mask & ~EpicNapiEvent);
552 __epic_pci_commit(ioaddr);
553 }
554
555 static inline void epic_napi_irq_on(struct net_device *dev,
556 struct epic_private *ep)
557 {
558 void __iomem *ioaddr = ep->ioaddr;
559
560 /* No need to commit possible posted write */
561 ew32(INTMASK, ep->irq_mask | EpicNapiEvent);
562 }
563
564 static int read_eeprom(struct epic_private *ep, int location)
565 {
566 void __iomem *ioaddr = ep->ioaddr;
567 int i;
568 int retval = 0;
569 int read_cmd = location |
570 (er32(EECTL) & 0x40 ? EE_READ64_CMD : EE_READ256_CMD);
571
572 ew32(EECTL, EE_ENB & ~EE_CS);
573 ew32(EECTL, EE_ENB);
574
575 /* Shift the read command bits out. */
576 for (i = 12; i >= 0; i--) {
577 short dataval = (read_cmd & (1 << i)) ? EE_WRITE_1 : EE_WRITE_0;
578 ew32(EECTL, EE_ENB | dataval);
579 eeprom_delay();
580 ew32(EECTL, EE_ENB | dataval | EE_SHIFT_CLK);
581 eeprom_delay();
582 }
583 ew32(EECTL, EE_ENB);
584
585 for (i = 16; i > 0; i--) {
586 ew32(EECTL, EE_ENB | EE_SHIFT_CLK);
587 eeprom_delay();
588 retval = (retval << 1) | ((er32(EECTL) & EE_DATA_READ) ? 1 : 0);
589 ew32(EECTL, EE_ENB);
590 eeprom_delay();
591 }
592
593 /* Terminate the EEPROM access. */
594 ew32(EECTL, EE_ENB & ~EE_CS);
595 return retval;
596 }
597
598 #define MII_READOP 1
599 #define MII_WRITEOP 2
600 static int mdio_read(struct net_device *dev, int phy_id, int location)
601 {
602 struct epic_private *ep = netdev_priv(dev);
603 void __iomem *ioaddr = ep->ioaddr;
604 int read_cmd = (phy_id << 9) | (location << 4) | MII_READOP;
605 int i;
606
607 ew32(MIICtrl, read_cmd);
608 /* Typical operation takes 25 loops. */
609 for (i = 400; i > 0; i--) {
610 barrier();
611 if ((er32(MIICtrl) & MII_READOP) == 0) {
612 /* Work around read failure bug. */
613 if (phy_id == 1 && location < 6 &&
614 er16(MIIData) == 0xffff) {
615 ew32(MIICtrl, read_cmd);
616 continue;
617 }
618 return er16(MIIData);
619 }
620 }
621 return 0xffff;
622 }
623
624 static void mdio_write(struct net_device *dev, int phy_id, int loc, int value)
625 {
626 struct epic_private *ep = netdev_priv(dev);
627 void __iomem *ioaddr = ep->ioaddr;
628 int i;
629
630 ew16(MIIData, value);
631 ew32(MIICtrl, (phy_id << 9) | (loc << 4) | MII_WRITEOP);
632 for (i = 10000; i > 0; i--) {
633 barrier();
634 if ((er32(MIICtrl) & MII_WRITEOP) == 0)
635 break;
636 }
637 }
638
639
640 static int epic_open(struct net_device *dev)
641 {
642 struct epic_private *ep = netdev_priv(dev);
643 void __iomem *ioaddr = ep->ioaddr;
644 const int irq = ep->pci_dev->irq;
645 int rc, i;
646
647 /* Soft reset the chip. */
648 ew32(GENCTL, 0x4001);
649
650 napi_enable(&ep->napi);
651 rc = request_irq(irq, epic_interrupt, IRQF_SHARED, dev->name, dev);
652 if (rc) {
653 napi_disable(&ep->napi);
654 return rc;
655 }
656
657 epic_init_ring(dev);
658
659 ew32(GENCTL, 0x4000);
660 /* This magic is documented in SMSC app note 7.15 */
661 for (i = 16; i > 0; i--)
662 ew32(TEST1, 0x0008);
663
664 /* Pull the chip out of low-power mode, enable interrupts, and set for
665 PCI read multiple. The MIIcfg setting and strange write order are
666 required by the details of which bits are reset and the transceiver
667 wiring on the Ositech CardBus card.
668 */
669 #if 0
670 ew32(MIICfg, dev->if_port == 1 ? 0x13 : 0x12);
671 #endif
672 if (ep->chip_flags & MII_PWRDWN)
673 ew32(NVCTL, (er32(NVCTL) & ~0x003c) | 0x4800);
674
675 /* Tell the chip to byteswap descriptors on big-endian hosts */
676 #ifdef __BIG_ENDIAN
677 ew32(GENCTL, 0x4432 | (RX_FIFO_THRESH << 8));
678 er32(GENCTL);
679 ew32(GENCTL, 0x0432 | (RX_FIFO_THRESH << 8));
680 #else
681 ew32(GENCTL, 0x4412 | (RX_FIFO_THRESH << 8));
682 er32(GENCTL);
683 ew32(GENCTL, 0x0412 | (RX_FIFO_THRESH << 8));
684 #endif
685
686 udelay(20); /* Looks like EPII needs that if you want reliable RX init. FIXME: pci posting bug? */
687
688 for (i = 0; i < 3; i++)
689 ew32(LAN0 + i*4, le16_to_cpu(((__le16*)dev->dev_addr)[i]));
690
691 ep->tx_threshold = TX_FIFO_THRESH;
692 ew32(TxThresh, ep->tx_threshold);
693
694 if (media2miictl[dev->if_port & 15]) {
695 if (ep->mii_phy_cnt)
696 mdio_write(dev, ep->phys[0], MII_BMCR, media2miictl[dev->if_port&15]);
697 if (dev->if_port == 1) {
698 if (debug > 1)
699 netdev_info(dev, "Using the 10base2 transceiver, MII status %4.4x.\n",
700 mdio_read(dev, ep->phys[0], MII_BMSR));
701 }
702 } else {
703 int mii_lpa = mdio_read(dev, ep->phys[0], MII_LPA);
704 if (mii_lpa != 0xffff) {
705 if ((mii_lpa & LPA_100FULL) || (mii_lpa & 0x01C0) == LPA_10FULL)
706 ep->mii.full_duplex = 1;
707 else if (! (mii_lpa & LPA_LPACK))
708 mdio_write(dev, ep->phys[0], MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART);
709 if (debug > 1)
710 netdev_info(dev, "Setting %s-duplex based on MII xcvr %d register read of %4.4x.\n",
711 ep->mii.full_duplex ? "full"
712 : "half",
713 ep->phys[0], mii_lpa);
714 }
715 }
716
717 ew32(TxCtrl, ep->mii.full_duplex ? 0x7f : 0x79);
718 ew32(PRxCDAR, ep->rx_ring_dma);
719 ew32(PTxCDAR, ep->tx_ring_dma);
720
721 /* Start the chip's Rx process. */
722 set_rx_mode(dev);
723 ew32(COMMAND, StartRx | RxQueued);
724
725 netif_start_queue(dev);
726
727 /* Enable interrupts by setting the interrupt mask. */
728 ew32(INTMASK, RxError | RxHeader | EpicNapiEvent | CntFull |
729 ((ep->chip_flags & TYPE2_INTR) ? PCIBusErr175 : PCIBusErr170) |
730 TxUnderrun);
731
732 if (debug > 1) {
733 netdev_dbg(dev, "epic_open() ioaddr %p IRQ %d status %4.4x %s-duplex.\n",
734 ioaddr, irq, er32(GENCTL),
735 ep->mii.full_duplex ? "full" : "half");
736 }
737
738 /* Set the timer to switch to check for link beat and perhaps switch
739 to an alternate media type. */
740 timer_setup(&ep->timer, epic_timer, 0);
741 ep->timer.expires = jiffies + 3*HZ;
742 add_timer(&ep->timer);
743
744 return rc;
745 }
746
747 /* Reset the chip to recover from a PCI transaction error.
748 This may occur at interrupt time. */
749 static void epic_pause(struct net_device *dev)
750 {
751 struct net_device_stats *stats = &dev->stats;
752 struct epic_private *ep = netdev_priv(dev);
753 void __iomem *ioaddr = ep->ioaddr;
754
755 netif_stop_queue (dev);
756
757 /* Disable interrupts by clearing the interrupt mask. */
758 ew32(INTMASK, 0x00000000);
759 /* Stop the chip's Tx and Rx DMA processes. */
760 ew16(COMMAND, StopRx | StopTxDMA | StopRxDMA);
761
762 /* Update the error counts. */
763 if (er16(COMMAND) != 0xffff) {
764 stats->rx_missed_errors += er8(MPCNT);
765 stats->rx_frame_errors += er8(ALICNT);
766 stats->rx_crc_errors += er8(CRCCNT);
767 }
768
769 /* Remove the packets on the Rx queue. */
770 epic_rx(dev, RX_RING_SIZE);
771 }
772
773 static void epic_restart(struct net_device *dev)
774 {
775 struct epic_private *ep = netdev_priv(dev);
776 void __iomem *ioaddr = ep->ioaddr;
777 int i;
778
779 /* Soft reset the chip. */
780 ew32(GENCTL, 0x4001);
781
782 netdev_dbg(dev, "Restarting the EPIC chip, Rx %d/%d Tx %d/%d.\n",
783 ep->cur_rx, ep->dirty_rx, ep->dirty_tx, ep->cur_tx);
784 udelay(1);
785
786 /* This magic is documented in SMSC app note 7.15 */
787 for (i = 16; i > 0; i--)
788 ew32(TEST1, 0x0008);
789
790 #ifdef __BIG_ENDIAN
791 ew32(GENCTL, 0x0432 | (RX_FIFO_THRESH << 8));
792 #else
793 ew32(GENCTL, 0x0412 | (RX_FIFO_THRESH << 8));
794 #endif
795 ew32(MIICfg, dev->if_port == 1 ? 0x13 : 0x12);
796 if (ep->chip_flags & MII_PWRDWN)
797 ew32(NVCTL, (er32(NVCTL) & ~0x003c) | 0x4800);
798
799 for (i = 0; i < 3; i++)
800 ew32(LAN0 + i*4, le16_to_cpu(((__le16*)dev->dev_addr)[i]));
801
802 ep->tx_threshold = TX_FIFO_THRESH;
803 ew32(TxThresh, ep->tx_threshold);
804 ew32(TxCtrl, ep->mii.full_duplex ? 0x7f : 0x79);
805 ew32(PRxCDAR, ep->rx_ring_dma +
806 (ep->cur_rx % RX_RING_SIZE) * sizeof(struct epic_rx_desc));
807 ew32(PTxCDAR, ep->tx_ring_dma +
808 (ep->dirty_tx % TX_RING_SIZE) * sizeof(struct epic_tx_desc));
809
810 /* Start the chip's Rx process. */
811 set_rx_mode(dev);
812 ew32(COMMAND, StartRx | RxQueued);
813
814 /* Enable interrupts by setting the interrupt mask. */
815 ew32(INTMASK, RxError | RxHeader | EpicNapiEvent | CntFull |
816 ((ep->chip_flags & TYPE2_INTR) ? PCIBusErr175 : PCIBusErr170) |
817 TxUnderrun);
818
819 netdev_dbg(dev, "epic_restart() done, cmd status %4.4x, ctl %4.4x interrupt %4.4x.\n",
820 er32(COMMAND), er32(GENCTL), er32(INTSTAT));
821 }
822
823 static void check_media(struct net_device *dev)
824 {
825 struct epic_private *ep = netdev_priv(dev);
826 void __iomem *ioaddr = ep->ioaddr;
827 int mii_lpa = ep->mii_phy_cnt ? mdio_read(dev, ep->phys[0], MII_LPA) : 0;
828 int negotiated = mii_lpa & ep->mii.advertising;
829 int duplex = (negotiated & 0x0100) || (negotiated & 0x01C0) == 0x0040;
830
831 if (ep->mii.force_media)
832 return;
833 if (mii_lpa == 0xffff) /* Bogus read */
834 return;
835 if (ep->mii.full_duplex != duplex) {
836 ep->mii.full_duplex = duplex;
837 netdev_info(dev, "Setting %s-duplex based on MII #%d link partner capability of %4.4x.\n",
838 ep->mii.full_duplex ? "full" : "half",
839 ep->phys[0], mii_lpa);
840 ew32(TxCtrl, ep->mii.full_duplex ? 0x7F : 0x79);
841 }
842 }
843
844 static void epic_timer(struct timer_list *t)
845 {
846 struct epic_private *ep = from_timer(ep, t, timer);
847 struct net_device *dev = ep->mii.dev;
848 void __iomem *ioaddr = ep->ioaddr;
849 int next_tick = 5*HZ;
850
851 if (debug > 3) {
852 netdev_dbg(dev, "Media monitor tick, Tx status %8.8x.\n",
853 er32(TxSTAT));
854 netdev_dbg(dev, "Other registers are IntMask %4.4x IntStatus %4.4x RxStatus %4.4x.\n",
855 er32(INTMASK), er32(INTSTAT), er32(RxSTAT));
856 }
857
858 check_media(dev);
859
860 ep->timer.expires = jiffies + next_tick;
861 add_timer(&ep->timer);
862 }
863
864 static void epic_tx_timeout(struct net_device *dev)
865 {
866 struct epic_private *ep = netdev_priv(dev);
867 void __iomem *ioaddr = ep->ioaddr;
868
869 if (debug > 0) {
870 netdev_warn(dev, "Transmit timeout using MII device, Tx status %4.4x.\n",
871 er16(TxSTAT));
872 if (debug > 1) {
873 netdev_dbg(dev, "Tx indices: dirty_tx %d, cur_tx %d.\n",
874 ep->dirty_tx, ep->cur_tx);
875 }
876 }
877 if (er16(TxSTAT) & 0x10) { /* Tx FIFO underflow. */
878 dev->stats.tx_fifo_errors++;
879 ew32(COMMAND, RestartTx);
880 } else {
881 epic_restart(dev);
882 ew32(COMMAND, TxQueued);
883 }
884
885 netif_trans_update(dev); /* prevent tx timeout */
886 dev->stats.tx_errors++;
887 if (!ep->tx_full)
888 netif_wake_queue(dev);
889 }
890
891 /* Initialize the Rx and Tx rings, along with various 'dev' bits. */
892 static void epic_init_ring(struct net_device *dev)
893 {
894 struct epic_private *ep = netdev_priv(dev);
895 int i;
896
897 ep->tx_full = 0;
898 ep->dirty_tx = ep->cur_tx = 0;
899 ep->cur_rx = ep->dirty_rx = 0;
900 ep->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
901
902 /* Initialize all Rx descriptors. */
903 for (i = 0; i < RX_RING_SIZE; i++) {
904 ep->rx_ring[i].rxstatus = 0;
905 ep->rx_ring[i].buflength = ep->rx_buf_sz;
906 ep->rx_ring[i].next = ep->rx_ring_dma +
907 (i+1)*sizeof(struct epic_rx_desc);
908 ep->rx_skbuff[i] = NULL;
909 }
910 /* Mark the last entry as wrapping the ring. */
911 ep->rx_ring[i-1].next = ep->rx_ring_dma;
912
913 /* Fill in the Rx buffers. Handle allocation failure gracefully. */
914 for (i = 0; i < RX_RING_SIZE; i++) {
915 struct sk_buff *skb = netdev_alloc_skb(dev, ep->rx_buf_sz + 2);
916 ep->rx_skbuff[i] = skb;
917 if (skb == NULL)
918 break;
919 skb_reserve(skb, 2); /* 16 byte align the IP header. */
920 ep->rx_ring[i].bufaddr = pci_map_single(ep->pci_dev,
921 skb->data, ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
922 ep->rx_ring[i].rxstatus = DescOwn;
923 }
924 ep->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
925
926 /* The Tx buffer descriptor is filled in as needed, but we
927 do need to clear the ownership bit. */
928 for (i = 0; i < TX_RING_SIZE; i++) {
929 ep->tx_skbuff[i] = NULL;
930 ep->tx_ring[i].txstatus = 0x0000;
931 ep->tx_ring[i].next = ep->tx_ring_dma +
932 (i+1)*sizeof(struct epic_tx_desc);
933 }
934 ep->tx_ring[i-1].next = ep->tx_ring_dma;
935 }
936
937 static netdev_tx_t epic_start_xmit(struct sk_buff *skb, struct net_device *dev)
938 {
939 struct epic_private *ep = netdev_priv(dev);
940 void __iomem *ioaddr = ep->ioaddr;
941 int entry, free_count;
942 u32 ctrl_word;
943 unsigned long flags;
944
945 if (skb_padto(skb, ETH_ZLEN))
946 return NETDEV_TX_OK;
947
948 /* Caution: the write order is important here, set the field with the
949 "ownership" bit last. */
950
951 /* Calculate the next Tx descriptor entry. */
952 spin_lock_irqsave(&ep->lock, flags);
953 free_count = ep->cur_tx - ep->dirty_tx;
954 entry = ep->cur_tx % TX_RING_SIZE;
955
956 ep->tx_skbuff[entry] = skb;
957 ep->tx_ring[entry].bufaddr = pci_map_single(ep->pci_dev, skb->data,
958 skb->len, PCI_DMA_TODEVICE);
959 if (free_count < TX_QUEUE_LEN/2) {/* Typical path */
960 ctrl_word = 0x100000; /* No interrupt */
961 } else if (free_count == TX_QUEUE_LEN/2) {
962 ctrl_word = 0x140000; /* Tx-done intr. */
963 } else if (free_count < TX_QUEUE_LEN - 1) {
964 ctrl_word = 0x100000; /* No Tx-done intr. */
965 } else {
966 /* Leave room for an additional entry. */
967 ctrl_word = 0x140000; /* Tx-done intr. */
968 ep->tx_full = 1;
969 }
970 ep->tx_ring[entry].buflength = ctrl_word | skb->len;
971 ep->tx_ring[entry].txstatus =
972 ((skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN) << 16)
973 | DescOwn;
974
975 ep->cur_tx++;
976 if (ep->tx_full)
977 netif_stop_queue(dev);
978
979 spin_unlock_irqrestore(&ep->lock, flags);
980 /* Trigger an immediate transmit demand. */
981 ew32(COMMAND, TxQueued);
982
983 if (debug > 4)
984 netdev_dbg(dev, "Queued Tx packet size %d to slot %d, flag %2.2x Tx status %8.8x.\n",
985 skb->len, entry, ctrl_word, er32(TxSTAT));
986
987 return NETDEV_TX_OK;
988 }
989
990 static void epic_tx_error(struct net_device *dev, struct epic_private *ep,
991 int status)
992 {
993 struct net_device_stats *stats = &dev->stats;
994
995 #ifndef final_version
996 /* There was an major error, log it. */
997 if (debug > 1)
998 netdev_dbg(dev, "Transmit error, Tx status %8.8x.\n",
999 status);
1000 #endif
1001 stats->tx_errors++;
1002 if (status & 0x1050)
1003 stats->tx_aborted_errors++;
1004 if (status & 0x0008)
1005 stats->tx_carrier_errors++;
1006 if (status & 0x0040)
1007 stats->tx_window_errors++;
1008 if (status & 0x0010)
1009 stats->tx_fifo_errors++;
1010 }
1011
1012 static void epic_tx(struct net_device *dev, struct epic_private *ep)
1013 {
1014 unsigned int dirty_tx, cur_tx;
1015
1016 /*
1017 * Note: if this lock becomes a problem we can narrow the locked
1018 * region at the cost of occasionally grabbing the lock more times.
1019 */
1020 cur_tx = ep->cur_tx;
1021 for (dirty_tx = ep->dirty_tx; cur_tx - dirty_tx > 0; dirty_tx++) {
1022 struct sk_buff *skb;
1023 int entry = dirty_tx % TX_RING_SIZE;
1024 int txstatus = ep->tx_ring[entry].txstatus;
1025
1026 if (txstatus & DescOwn)
1027 break; /* It still hasn't been Txed */
1028
1029 if (likely(txstatus & 0x0001)) {
1030 dev->stats.collisions += (txstatus >> 8) & 15;
1031 dev->stats.tx_packets++;
1032 dev->stats.tx_bytes += ep->tx_skbuff[entry]->len;
1033 } else
1034 epic_tx_error(dev, ep, txstatus);
1035
1036 /* Free the original skb. */
1037 skb = ep->tx_skbuff[entry];
1038 pci_unmap_single(ep->pci_dev, ep->tx_ring[entry].bufaddr,
1039 skb->len, PCI_DMA_TODEVICE);
1040 dev_consume_skb_irq(skb);
1041 ep->tx_skbuff[entry] = NULL;
1042 }
1043
1044 #ifndef final_version
1045 if (cur_tx - dirty_tx > TX_RING_SIZE) {
1046 netdev_warn(dev, "Out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
1047 dirty_tx, cur_tx, ep->tx_full);
1048 dirty_tx += TX_RING_SIZE;
1049 }
1050 #endif
1051 ep->dirty_tx = dirty_tx;
1052 if (ep->tx_full && cur_tx - dirty_tx < TX_QUEUE_LEN - 4) {
1053 /* The ring is no longer full, allow new TX entries. */
1054 ep->tx_full = 0;
1055 netif_wake_queue(dev);
1056 }
1057 }
1058
1059 /* The interrupt handler does all of the Rx thread work and cleans up
1060 after the Tx thread. */
1061 static irqreturn_t epic_interrupt(int irq, void *dev_instance)
1062 {
1063 struct net_device *dev = dev_instance;
1064 struct epic_private *ep = netdev_priv(dev);
1065 void __iomem *ioaddr = ep->ioaddr;
1066 unsigned int handled = 0;
1067 int status;
1068
1069 status = er32(INTSTAT);
1070 /* Acknowledge all of the current interrupt sources ASAP. */
1071 ew32(INTSTAT, status & EpicNormalEvent);
1072
1073 if (debug > 4) {
1074 netdev_dbg(dev, "Interrupt, status=%#8.8x new intstat=%#8.8x.\n",
1075 status, er32(INTSTAT));
1076 }
1077
1078 if ((status & IntrSummary) == 0)
1079 goto out;
1080
1081 handled = 1;
1082
1083 if (status & EpicNapiEvent) {
1084 spin_lock(&ep->napi_lock);
1085 if (napi_schedule_prep(&ep->napi)) {
1086 epic_napi_irq_off(dev, ep);
1087 __napi_schedule(&ep->napi);
1088 }
1089 spin_unlock(&ep->napi_lock);
1090 }
1091 status &= ~EpicNapiEvent;
1092
1093 /* Check uncommon events all at once. */
1094 if (status & (CntFull | TxUnderrun | PCIBusErr170 | PCIBusErr175)) {
1095 struct net_device_stats *stats = &dev->stats;
1096
1097 if (status == EpicRemoved)
1098 goto out;
1099
1100 /* Always update the error counts to avoid overhead later. */
1101 stats->rx_missed_errors += er8(MPCNT);
1102 stats->rx_frame_errors += er8(ALICNT);
1103 stats->rx_crc_errors += er8(CRCCNT);
1104
1105 if (status & TxUnderrun) { /* Tx FIFO underflow. */
1106 stats->tx_fifo_errors++;
1107 ew32(TxThresh, ep->tx_threshold += 128);
1108 /* Restart the transmit process. */
1109 ew32(COMMAND, RestartTx);
1110 }
1111 if (status & PCIBusErr170) {
1112 netdev_err(dev, "PCI Bus Error! status %4.4x.\n",
1113 status);
1114 epic_pause(dev);
1115 epic_restart(dev);
1116 }
1117 /* Clear all error sources. */
1118 ew32(INTSTAT, status & 0x7f18);
1119 }
1120
1121 out:
1122 if (debug > 3) {
1123 netdev_dbg(dev, "exit interrupt, intr_status=%#4.4x.\n",
1124 status);
1125 }
1126
1127 return IRQ_RETVAL(handled);
1128 }
1129
1130 static int epic_rx(struct net_device *dev, int budget)
1131 {
1132 struct epic_private *ep = netdev_priv(dev);
1133 int entry = ep->cur_rx % RX_RING_SIZE;
1134 int rx_work_limit = ep->dirty_rx + RX_RING_SIZE - ep->cur_rx;
1135 int work_done = 0;
1136
1137 if (debug > 4)
1138 netdev_dbg(dev, " In epic_rx(), entry %d %8.8x.\n", entry,
1139 ep->rx_ring[entry].rxstatus);
1140
1141 if (rx_work_limit > budget)
1142 rx_work_limit = budget;
1143
1144 /* If we own the next entry, it's a new packet. Send it up. */
1145 while ((ep->rx_ring[entry].rxstatus & DescOwn) == 0) {
1146 int status = ep->rx_ring[entry].rxstatus;
1147
1148 if (debug > 4)
1149 netdev_dbg(dev, " epic_rx() status was %8.8x.\n",
1150 status);
1151 if (--rx_work_limit < 0)
1152 break;
1153 if (status & 0x2006) {
1154 if (debug > 2)
1155 netdev_dbg(dev, "epic_rx() error status was %8.8x.\n",
1156 status);
1157 if (status & 0x2000) {
1158 netdev_warn(dev, "Oversized Ethernet frame spanned multiple buffers, status %4.4x!\n",
1159 status);
1160 dev->stats.rx_length_errors++;
1161 } else if (status & 0x0006)
1162 /* Rx Frame errors are counted in hardware. */
1163 dev->stats.rx_errors++;
1164 } else {
1165 /* Malloc up new buffer, compatible with net-2e. */
1166 /* Omit the four octet CRC from the length. */
1167 short pkt_len = (status >> 16) - 4;
1168 struct sk_buff *skb;
1169
1170 if (pkt_len > PKT_BUF_SZ - 4) {
1171 netdev_err(dev, "Oversized Ethernet frame, status %x %d bytes.\n",
1172 status, pkt_len);
1173 pkt_len = 1514;
1174 }
1175 /* Check if the packet is long enough to accept without copying
1176 to a minimally-sized skbuff. */
1177 if (pkt_len < rx_copybreak &&
1178 (skb = netdev_alloc_skb(dev, pkt_len + 2)) != NULL) {
1179 skb_reserve(skb, 2); /* 16 byte align the IP header */
1180 pci_dma_sync_single_for_cpu(ep->pci_dev,
1181 ep->rx_ring[entry].bufaddr,
1182 ep->rx_buf_sz,
1183 PCI_DMA_FROMDEVICE);
1184 skb_copy_to_linear_data(skb, ep->rx_skbuff[entry]->data, pkt_len);
1185 skb_put(skb, pkt_len);
1186 pci_dma_sync_single_for_device(ep->pci_dev,
1187 ep->rx_ring[entry].bufaddr,
1188 ep->rx_buf_sz,
1189 PCI_DMA_FROMDEVICE);
1190 } else {
1191 pci_unmap_single(ep->pci_dev,
1192 ep->rx_ring[entry].bufaddr,
1193 ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
1194 skb_put(skb = ep->rx_skbuff[entry], pkt_len);
1195 ep->rx_skbuff[entry] = NULL;
1196 }
1197 skb->protocol = eth_type_trans(skb, dev);
1198 netif_receive_skb(skb);
1199 dev->stats.rx_packets++;
1200 dev->stats.rx_bytes += pkt_len;
1201 }
1202 work_done++;
1203 entry = (++ep->cur_rx) % RX_RING_SIZE;
1204 }
1205
1206 /* Refill the Rx ring buffers. */
1207 for (; ep->cur_rx - ep->dirty_rx > 0; ep->dirty_rx++) {
1208 entry = ep->dirty_rx % RX_RING_SIZE;
1209 if (ep->rx_skbuff[entry] == NULL) {
1210 struct sk_buff *skb;
1211 skb = ep->rx_skbuff[entry] = netdev_alloc_skb(dev, ep->rx_buf_sz + 2);
1212 if (skb == NULL)
1213 break;
1214 skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
1215 ep->rx_ring[entry].bufaddr = pci_map_single(ep->pci_dev,
1216 skb->data, ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
1217 work_done++;
1218 }
1219 /* AV: shouldn't we add a barrier here? */
1220 ep->rx_ring[entry].rxstatus = DescOwn;
1221 }
1222 return work_done;
1223 }
1224
1225 static void epic_rx_err(struct net_device *dev, struct epic_private *ep)
1226 {
1227 void __iomem *ioaddr = ep->ioaddr;
1228 int status;
1229
1230 status = er32(INTSTAT);
1231
1232 if (status == EpicRemoved)
1233 return;
1234 if (status & RxOverflow) /* Missed a Rx frame. */
1235 dev->stats.rx_errors++;
1236 if (status & (RxOverflow | RxFull))
1237 ew16(COMMAND, RxQueued);
1238 }
1239
1240 static int epic_poll(struct napi_struct *napi, int budget)
1241 {
1242 struct epic_private *ep = container_of(napi, struct epic_private, napi);
1243 struct net_device *dev = ep->mii.dev;
1244 void __iomem *ioaddr = ep->ioaddr;
1245 int work_done;
1246
1247 epic_tx(dev, ep);
1248
1249 work_done = epic_rx(dev, budget);
1250
1251 epic_rx_err(dev, ep);
1252
1253 if (work_done < budget && napi_complete_done(napi, work_done)) {
1254 unsigned long flags;
1255
1256 spin_lock_irqsave(&ep->napi_lock, flags);
1257
1258 ew32(INTSTAT, EpicNapiEvent);
1259 epic_napi_irq_on(dev, ep);
1260 spin_unlock_irqrestore(&ep->napi_lock, flags);
1261 }
1262
1263 return work_done;
1264 }
1265
1266 static int epic_close(struct net_device *dev)
1267 {
1268 struct epic_private *ep = netdev_priv(dev);
1269 struct pci_dev *pdev = ep->pci_dev;
1270 void __iomem *ioaddr = ep->ioaddr;
1271 struct sk_buff *skb;
1272 int i;
1273
1274 netif_stop_queue(dev);
1275 napi_disable(&ep->napi);
1276
1277 if (debug > 1)
1278 netdev_dbg(dev, "Shutting down ethercard, status was %2.2x.\n",
1279 er32(INTSTAT));
1280
1281 del_timer_sync(&ep->timer);
1282
1283 epic_disable_int(dev, ep);
1284
1285 free_irq(pdev->irq, dev);
1286
1287 epic_pause(dev);
1288
1289 /* Free all the skbuffs in the Rx queue. */
1290 for (i = 0; i < RX_RING_SIZE; i++) {
1291 skb = ep->rx_skbuff[i];
1292 ep->rx_skbuff[i] = NULL;
1293 ep->rx_ring[i].rxstatus = 0; /* Not owned by Epic chip. */
1294 ep->rx_ring[i].buflength = 0;
1295 if (skb) {
1296 pci_unmap_single(pdev, ep->rx_ring[i].bufaddr,
1297 ep->rx_buf_sz, PCI_DMA_FROMDEVICE);
1298 dev_kfree_skb(skb);
1299 }
1300 ep->rx_ring[i].bufaddr = 0xBADF00D0; /* An invalid address. */
1301 }
1302 for (i = 0; i < TX_RING_SIZE; i++) {
1303 skb = ep->tx_skbuff[i];
1304 ep->tx_skbuff[i] = NULL;
1305 if (!skb)
1306 continue;
1307 pci_unmap_single(pdev, ep->tx_ring[i].bufaddr, skb->len,
1308 PCI_DMA_TODEVICE);
1309 dev_kfree_skb(skb);
1310 }
1311
1312 /* Green! Leave the chip in low-power mode. */
1313 ew32(GENCTL, 0x0008);
1314
1315 return 0;
1316 }
1317
1318 static struct net_device_stats *epic_get_stats(struct net_device *dev)
1319 {
1320 struct epic_private *ep = netdev_priv(dev);
1321 void __iomem *ioaddr = ep->ioaddr;
1322
1323 if (netif_running(dev)) {
1324 struct net_device_stats *stats = &dev->stats;
1325
1326 stats->rx_missed_errors += er8(MPCNT);
1327 stats->rx_frame_errors += er8(ALICNT);
1328 stats->rx_crc_errors += er8(CRCCNT);
1329 }
1330
1331 return &dev->stats;
1332 }
1333
1334 /* Set or clear the multicast filter for this adaptor.
1335 Note that we only use exclusion around actually queueing the
1336 new frame, not around filling ep->setup_frame. This is non-deterministic
1337 when re-entered but still correct. */
1338
1339 static void set_rx_mode(struct net_device *dev)
1340 {
1341 struct epic_private *ep = netdev_priv(dev);
1342 void __iomem *ioaddr = ep->ioaddr;
1343 unsigned char mc_filter[8]; /* Multicast hash filter */
1344 int i;
1345
1346 if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
1347 ew32(RxCtrl, 0x002c);
1348 /* Unconditionally log net taps. */
1349 memset(mc_filter, 0xff, sizeof(mc_filter));
1350 } else if ((!netdev_mc_empty(dev)) || (dev->flags & IFF_ALLMULTI)) {
1351 /* There is apparently a chip bug, so the multicast filter
1352 is never enabled. */
1353 /* Too many to filter perfectly -- accept all multicasts. */
1354 memset(mc_filter, 0xff, sizeof(mc_filter));
1355 ew32(RxCtrl, 0x000c);
1356 } else if (netdev_mc_empty(dev)) {
1357 ew32(RxCtrl, 0x0004);
1358 return;
1359 } else { /* Never executed, for now. */
1360 struct netdev_hw_addr *ha;
1361
1362 memset(mc_filter, 0, sizeof(mc_filter));
1363 netdev_for_each_mc_addr(ha, dev) {
1364 unsigned int bit_nr =
1365 ether_crc_le(ETH_ALEN, ha->addr) & 0x3f;
1366 mc_filter[bit_nr >> 3] |= (1 << bit_nr);
1367 }
1368 }
1369 /* ToDo: perhaps we need to stop the Tx and Rx process here? */
1370 if (memcmp(mc_filter, ep->mc_filter, sizeof(mc_filter))) {
1371 for (i = 0; i < 4; i++)
1372 ew16(MC0 + i*4, ((u16 *)mc_filter)[i]);
1373 memcpy(ep->mc_filter, mc_filter, sizeof(mc_filter));
1374 }
1375 }
1376
1377 static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
1378 {
1379 struct epic_private *np = netdev_priv(dev);
1380
1381 strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1382 strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1383 strlcpy(info->bus_info, pci_name(np->pci_dev), sizeof(info->bus_info));
1384 }
1385
1386 static int netdev_get_link_ksettings(struct net_device *dev,
1387 struct ethtool_link_ksettings *cmd)
1388 {
1389 struct epic_private *np = netdev_priv(dev);
1390
1391 spin_lock_irq(&np->lock);
1392 mii_ethtool_get_link_ksettings(&np->mii, cmd);
1393 spin_unlock_irq(&np->lock);
1394
1395 return 0;
1396 }
1397
1398 static int netdev_set_link_ksettings(struct net_device *dev,
1399 const struct ethtool_link_ksettings *cmd)
1400 {
1401 struct epic_private *np = netdev_priv(dev);
1402 int rc;
1403
1404 spin_lock_irq(&np->lock);
1405 rc = mii_ethtool_set_link_ksettings(&np->mii, cmd);
1406 spin_unlock_irq(&np->lock);
1407
1408 return rc;
1409 }
1410
1411 static int netdev_nway_reset(struct net_device *dev)
1412 {
1413 struct epic_private *np = netdev_priv(dev);
1414 return mii_nway_restart(&np->mii);
1415 }
1416
1417 static u32 netdev_get_link(struct net_device *dev)
1418 {
1419 struct epic_private *np = netdev_priv(dev);
1420 return mii_link_ok(&np->mii);
1421 }
1422
1423 static u32 netdev_get_msglevel(struct net_device *dev)
1424 {
1425 return debug;
1426 }
1427
1428 static void netdev_set_msglevel(struct net_device *dev, u32 value)
1429 {
1430 debug = value;
1431 }
1432
1433 static int ethtool_begin(struct net_device *dev)
1434 {
1435 struct epic_private *ep = netdev_priv(dev);
1436 void __iomem *ioaddr = ep->ioaddr;
1437
1438 /* power-up, if interface is down */
1439 if (!netif_running(dev)) {
1440 ew32(GENCTL, 0x0200);
1441 ew32(NVCTL, (er32(NVCTL) & ~0x003c) | 0x4800);
1442 }
1443 return 0;
1444 }
1445
1446 static void ethtool_complete(struct net_device *dev)
1447 {
1448 struct epic_private *ep = netdev_priv(dev);
1449 void __iomem *ioaddr = ep->ioaddr;
1450
1451 /* power-down, if interface is down */
1452 if (!netif_running(dev)) {
1453 ew32(GENCTL, 0x0008);
1454 ew32(NVCTL, (er32(NVCTL) & ~0x483c) | 0x0000);
1455 }
1456 }
1457
1458 static const struct ethtool_ops netdev_ethtool_ops = {
1459 .get_drvinfo = netdev_get_drvinfo,
1460 .nway_reset = netdev_nway_reset,
1461 .get_link = netdev_get_link,
1462 .get_msglevel = netdev_get_msglevel,
1463 .set_msglevel = netdev_set_msglevel,
1464 .begin = ethtool_begin,
1465 .complete = ethtool_complete,
1466 .get_link_ksettings = netdev_get_link_ksettings,
1467 .set_link_ksettings = netdev_set_link_ksettings,
1468 };
1469
1470 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1471 {
1472 struct epic_private *np = netdev_priv(dev);
1473 void __iomem *ioaddr = np->ioaddr;
1474 struct mii_ioctl_data *data = if_mii(rq);
1475 int rc;
1476
1477 /* power-up, if interface is down */
1478 if (! netif_running(dev)) {
1479 ew32(GENCTL, 0x0200);
1480 ew32(NVCTL, (er32(NVCTL) & ~0x003c) | 0x4800);
1481 }
1482
1483 /* all non-ethtool ioctls (the SIOC[GS]MIIxxx ioctls) */
1484 spin_lock_irq(&np->lock);
1485 rc = generic_mii_ioctl(&np->mii, data, cmd, NULL);
1486 spin_unlock_irq(&np->lock);
1487
1488 /* power-down, if interface is down */
1489 if (! netif_running(dev)) {
1490 ew32(GENCTL, 0x0008);
1491 ew32(NVCTL, (er32(NVCTL) & ~0x483c) | 0x0000);
1492 }
1493 return rc;
1494 }
1495
1496
1497 static void epic_remove_one(struct pci_dev *pdev)
1498 {
1499 struct net_device *dev = pci_get_drvdata(pdev);
1500 struct epic_private *ep = netdev_priv(dev);
1501
1502 pci_free_consistent(pdev, TX_TOTAL_SIZE, ep->tx_ring, ep->tx_ring_dma);
1503 pci_free_consistent(pdev, RX_TOTAL_SIZE, ep->rx_ring, ep->rx_ring_dma);
1504 unregister_netdev(dev);
1505 pci_iounmap(pdev, ep->ioaddr);
1506 pci_release_regions(pdev);
1507 free_netdev(dev);
1508 pci_disable_device(pdev);
1509 /* pci_power_off(pdev, -1); */
1510 }
1511
1512
1513 #ifdef CONFIG_PM
1514
1515 static int epic_suspend (struct pci_dev *pdev, pm_message_t state)
1516 {
1517 struct net_device *dev = pci_get_drvdata(pdev);
1518 struct epic_private *ep = netdev_priv(dev);
1519 void __iomem *ioaddr = ep->ioaddr;
1520
1521 if (!netif_running(dev))
1522 return 0;
1523 epic_pause(dev);
1524 /* Put the chip into low-power mode. */
1525 ew32(GENCTL, 0x0008);
1526 /* pci_power_off(pdev, -1); */
1527 return 0;
1528 }
1529
1530
1531 static int epic_resume (struct pci_dev *pdev)
1532 {
1533 struct net_device *dev = pci_get_drvdata(pdev);
1534
1535 if (!netif_running(dev))
1536 return 0;
1537 epic_restart(dev);
1538 /* pci_power_on(pdev); */
1539 return 0;
1540 }
1541
1542 #endif /* CONFIG_PM */
1543
1544
1545 static struct pci_driver epic_driver = {
1546 .name = DRV_NAME,
1547 .id_table = epic_pci_tbl,
1548 .probe = epic_init_one,
1549 .remove = epic_remove_one,
1550 #ifdef CONFIG_PM
1551 .suspend = epic_suspend,
1552 .resume = epic_resume,
1553 #endif /* CONFIG_PM */
1554 };
1555
1556
1557 static int __init epic_init (void)
1558 {
1559 /* when a module, this is printed whether or not devices are found in probe */
1560 #ifdef MODULE
1561 pr_info("%s%s\n", version, version2);
1562 #endif
1563
1564 return pci_register_driver(&epic_driver);
1565 }
1566
1567
1568 static void __exit epic_cleanup (void)
1569 {
1570 pci_unregister_driver (&epic_driver);
1571 }
1572
1573
1574 module_init(epic_init);
1575 module_exit(epic_cleanup);