drivers/net/ethernet/stmicro/stmmac/Kconfig

   1 # SPDX-License-Identifier: GPL-2.0-only
   2 config STMMAC_ETH
   3         tristate "STMicroelectronics Multi-Gigabit Ethernet driver"
   4         depends on HAS_IOMEM && HAS_DMA
   5         select MII
   6         select MDIO_XPCS
   7         select PAGE_POOL
   8         select PHYLINK
   9         select CRC32
  10         imply PTP_1588_CLOCK
  11         select RESET_CONTROLLER
  12         help
  13           This is the driver for the Ethernet IPs built around a
  14           Synopsys IP Core.
  15
  16 if STMMAC_ETH
  17
  18 config STMMAC_SELFTESTS
  19         bool "Support for STMMAC Selftests"
  20         depends on INET
  21         depends on STMMAC_ETH
  22         default n
  23         help
  24           This adds support for STMMAC Selftests using ethtool. Enable this
  25           feature if you are facing problems with your HW and submit the test
  26           results to the netdev Mailing List.
  27
  28 config STMMAC_PLATFORM
  29         tristate "STMMAC Platform bus support"
  30         depends on STMMAC_ETH
  31         select MFD_SYSCON
  32         default y
  33         help
  34           This selects the platform specific bus support for the stmmac driver.
  35           This is the driver used on several SoCs:
  36           STi, Allwinner, Amlogic Meson, Altera SOCFPGA.
  37
  38           If you have a controller with this interface, say Y or M here.
  39
  40           If unsure, say N.
  41
  42 if STMMAC_PLATFORM
  43
  44 config DWMAC_DWC_QOS_ETH
  45         tristate "Support for snps,dwc-qos-ethernet.txt DT binding."
  46         select CRC32
  47         select MII
  48         depends on OF && HAS_DMA
  49         help
  50           Support for chips using the snps,dwc-qos-ethernet.txt DT binding.
  51
  52 config DWMAC_GENERIC
  53         tristate "Generic driver for DWMAC"
  54         default STMMAC_PLATFORM
  55         help
  56           Generic DWMAC driver for platforms that don't require any
  57           platform specific code to function or is using platform
  58           data for setup.
  59
  60 config DWMAC_ANARION
  61         tristate "Adaptrum Anarion GMAC support"
  62         default ARC
  63         depends on OF && (ARC || COMPILE_TEST)
  64         help
  65           Support for Adaptrum Anarion GMAC Ethernet controller.
  66
  67           This selects the Anarion SoC glue layer support for the stmmac driver.
  68
  69 config DWMAC_IPQ806X
  70         tristate "QCA IPQ806x DWMAC support"
  71         default ARCH_QCOM
  72         depends on OF && (ARCH_QCOM || COMPILE_TEST)
  73         select MFD_SYSCON
  74         help
  75           Support for QCA IPQ806X DWMAC Ethernet.
  76
  77           This selects the IPQ806x SoC glue layer support for the stmmac
  78           device driver. This driver does not use any of the hardware
  79           acceleration features available on this SoC. Network devices
  80           will behave like standard non-accelerated ethernet interfaces.
  81
  82 config DWMAC_LPC18XX
  83         tristate "NXP LPC18xx/43xx DWMAC support"
  84         default ARCH_LPC18XX
  85         depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
  86         select MFD_SYSCON
  87         help
  88           Support for NXP LPC18xx/43xx DWMAC Ethernet.
  89
  90 config DWMAC_MEDIATEK
  91         tristate "MediaTek MT27xx GMAC support"
  92         depends on OF && (ARCH_MEDIATEK || COMPILE_TEST)
  93         help
  94           Support for MediaTek GMAC Ethernet controller.
  95
  96           This selects the MT2712 SoC support for the stmmac driver.
  97
  98 config DWMAC_MESON
  99         tristate "Amlogic Meson dwmac support"
 100         default ARCH_MESON
 101         depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST)
 102         help
 103           Support for Ethernet controller on Amlogic Meson SoCs.
 104
 105           This selects the Amlogic Meson SoC glue layer support for
 106           the stmmac device driver. This driver is used for Meson6,
 107           Meson8, Meson8b and GXBB SoCs.
 108
 109 config DWMAC_OXNAS
 110         tristate "Oxford Semiconductor OXNAS dwmac support"
 111         default ARCH_OXNAS
 112         depends on OF && COMMON_CLK && (ARCH_OXNAS || COMPILE_TEST)
 113         select MFD_SYSCON
 114         help
 115           Support for Ethernet controller on Oxford Semiconductor OXNAS SoCs.
 116
 117           This selects the Oxford Semiconductor OXNASSoC glue layer support for
 118           the stmmac device driver. This driver is used for OX820.
 119
 120 config DWMAC_QCOM_ETHQOS
 121         tristate "Qualcomm ETHQOS support"
 122         default ARCH_QCOM
 123         depends on OF && (ARCH_QCOM || COMPILE_TEST)
 124         help
 125           Support for the Qualcomm ETHQOS core.
 126
 127           This selects the Qualcomm ETHQOS glue layer support for the
 128           stmmac device driver.
 129
 130 config DWMAC_ROCKCHIP
 131         tristate "Rockchip dwmac support"
 132         default ARCH_ROCKCHIP
 133         depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
 134         select MFD_SYSCON
 135         help
 136           Support for Ethernet controller on Rockchip RK3288 SoC.
 137
 138           This selects the Rockchip RK3288 SoC glue layer support for
 139           the stmmac device driver.
 140
 141 config DWMAC_SOCFPGA
 142         tristate "SOCFPGA dwmac support"
 143         default (ARCH_SOCFPGA || ARCH_STRATIX10)
 144         depends on OF && (ARCH_SOCFPGA || ARCH_STRATIX10 || COMPILE_TEST)
 145         select MFD_SYSCON
 146         help
 147           Support for ethernet controller on Altera SOCFPGA
 148
 149           This selects the Altera SOCFPGA SoC glue layer support
 150           for the stmmac device driver. This driver is used for
 151           arria5 and cyclone5 FPGA SoCs.
 152
 153 config DWMAC_STI
 154         tristate "STi GMAC support"
 155         default ARCH_STI
 156         depends on OF && (ARCH_STI || COMPILE_TEST)
 157         select MFD_SYSCON
 158         help
 159           Support for ethernet controller on STi SOCs.
 160
 161           This selects STi SoC glue layer support for the stmmac
 162           device driver. This driver is used on for the STi series
 163           SOCs GMAC ethernet controller.
 164
 165 config DWMAC_STM32
 166         tristate "STM32 DWMAC support"
 167         default ARCH_STM32
 168         depends on OF && HAS_IOMEM && (ARCH_STM32 || COMPILE_TEST)
 169         select MFD_SYSCON
 170         help
 171           Support for ethernet controller on STM32 SOCs.
 172
 173           This selects STM32 SoC glue layer support for the stmmac
 174           device driver. This driver is used on for the STM32 series
 175           SOCs GMAC ethernet controller.
 176
 177 config DWMAC_SUNXI
 178         tristate "Allwinner GMAC support"
 179         default ARCH_SUNXI
 180         depends on OF && (ARCH_SUNXI || COMPILE_TEST)
 181         help
 182           Support for Allwinner A20/A31 GMAC ethernet controllers.
 183
 184           This selects Allwinner SoC glue layer support for the
 185           stmmac device driver. This driver is used for A20/A31
 186           GMAC ethernet controller.
 187
 188 config DWMAC_SUN8I
 189         tristate "Allwinner sun8i GMAC support"
 190         default ARCH_SUNXI
 191         depends on OF && (ARCH_SUNXI || COMPILE_TEST)
 192         select MDIO_BUS_MUX
 193         help
 194           Support for Allwinner H3 A83T A64 EMAC ethernet controllers.
 195
 196           This selects Allwinner SoC glue layer support for the
 197           stmmac device driver. This driver is used for H3/A83T/A64
 198           EMAC ethernet controller.
 199
 200 config DWMAC_IMX8
 201         tristate "NXP IMX8 DWMAC support"
 202         default ARCH_MXC
 203         depends on OF && (ARCH_MXC || COMPILE_TEST)
 204         select MFD_SYSCON
 205         help
 206           Support for ethernet controller on NXP i.MX8 SOCs.
 207
 208           This selects NXP SoC glue layer support for the stmmac
 209           device driver. This driver is used for i.MX8 series like
 210           iMX8MP/iMX8DXL GMAC ethernet controller.
 211
 212 endif
 213
 214 config DWMAC_INTEL
 215         tristate "Intel GMAC support"
 216         default X86
 217         depends on X86 && STMMAC_ETH && PCI
 218         depends on COMMON_CLK
 219         help
 220           This selects the Intel platform specific bus support for the
 221           stmmac driver. This driver is used for Intel Quark/EHL/TGL.
 222
 223 config STMMAC_PCI
 224         tristate "STMMAC PCI bus support"
 225         depends on STMMAC_ETH && PCI
 226         depends on COMMON_CLK
 227         help
 228           This selects the platform specific bus support for the stmmac driver.
 229           This driver was tested on XLINX XC2V3000 FF1152AMT0221
 230           D1215994A VIRTEX FPGA board and SNPS QoS IPK Prototyping Kit.
 231
 232           If you have a controller with this interface, say Y or M here.
 233
 234           If unsure, say N.
 235 endif