drivers/net/hamradio/bpqether.c

   1 /*
   2  *      G8BPQ compatible "AX.25 via ethernet" driver release 004
   3  *
   4  *      This code REQUIRES 2.0.0 or higher/ NET3.029
   5  *
   6  *      This module:
   7  *              This module is free software; you can redistribute it and/or
   8  *              modify it under the terms of the GNU General Public License
   9  *              as published by the Free Software Foundation; either version
  10  *              2 of the License, or (at your option) any later version.
  11  *
  12  *      This is a "pseudo" network driver to allow AX.25 over Ethernet
  13  *      using G8BPQ encapsulation. It has been extracted from the protocol
  14  *      implementation because
  15  *
  16  *              - things got unreadable within the protocol stack
  17  *              - to cure the protocol stack from "feature-ism"
  18  *              - a protocol implementation shouldn't need to know on
  19  *                which hardware it is running
  20  *              - user-level programs like the AX.25 utilities shouldn't
  21  *                need to know about the hardware.
  22  *              - IP over ethernet encapsulated AX.25 was impossible
  23  *              - rxecho.c did not work
  24  *              - to have room for extensions
  25  *              - it just deserves to "live" as an own driver
  26  *
  27  *      This driver can use any ethernet destination address, and can be
  28  *      limited to accept frames from one dedicated ethernet card only.
  29  *
  30  *      Note that the driver sets up the BPQ devices automagically on
  31  *      startup or (if started before the "insmod" of an ethernet device)
  32  *      on "ifconfig up". It hopefully will remove the BPQ on "rmmod"ing
  33  *      the ethernet device (in fact: as soon as another ethernet or bpq
  34  *      device gets "ifconfig"ured).
  35  *
  36  *      I have heard that several people are thinking of experiments
  37  *      with highspeed packet radio using existing ethernet cards.
  38  *      Well, this driver is prepared for this purpose, just add
  39  *      your tx key control and a txdelay / tailtime algorithm,
  40  *      probably some buffering, and /voila/...
  41  *
  42  *      History
  43  *      BPQ   001       Joerg(DL1BKE)           Extracted BPQ code from AX.25
  44  *                                              protocol stack and added my own
  45  *                                              yet existing patches
  46  *      BPQ   002       Joerg(DL1BKE)           Scan network device list on
  47  *                                              startup.
  48  *      BPQ   003       Joerg(DL1BKE)           Ethernet destination address
  49  *                                              and accepted source address
  50  *                                              can be configured by an ioctl()
  51  *                                              call.
  52  *                                              Fixed to match Linux networking
  53  *                                              changes - 2.1.15.
  54  *      BPQ   004       Joerg(DL1BKE)           Fixed to not lock up on ifconfig.
  55  */
  56
  57 #include <linux/errno.h>
  58 #include <linux/types.h>
  59 #include <linux/socket.h>
  60 #include <linux/in.h>
  61 #include <linux/kernel.h>
  62 #include <linux/string.h>
  63 #include <linux/net.h>
  64 #include <net/ax25.h>
  65 #include <linux/inet.h>
  66 #include <linux/netdevice.h>
  67 #include <linux/etherdevice.h>
  68 #include <linux/if_arp.h>
  69 #include <linux/skbuff.h>
  70 #include <net/sock.h>
  71 #include <asm/system.h>
  72 #include <asm/uaccess.h>
  73 #include <linux/mm.h>
  74 #include <linux/interrupt.h>
  75 #include <linux/notifier.h>
  76 #include <linux/proc_fs.h>
  77 #include <linux/seq_file.h>
  78 #include <linux/stat.h>
  79 #include <linux/netfilter.h>
  80 #include <linux/module.h>
  81 #include <linux/init.h>
  82 #include <linux/rtnetlink.h>
  83
  84 #include <net/ip.h>
  85 #include <net/arp.h>
  86 #include <net/net_namespace.h>
  87
  88 #include <linux/bpqether.h>
  89
  90 static const char banner[] __initdata = KERN_INFO \
  91         "AX.25: bpqether driver version 004\n";
  92
  93 static char bcast_addr[6]={0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
  94
  95 static char bpq_eth_addr[6];
  96
  97 static int bpq_rcv(struct sk_buff *, struct net_device *, struct packet_type *, struct net_device *);
  98 static int bpq_device_event(struct notifier_block *, unsigned long, void *);
  99
 100 static struct packet_type bpq_packet_type __read_mostly = {
 101         .type   = cpu_to_be16(ETH_P_BPQ),
 102         .func   = bpq_rcv,
 103 };
 104
 105 static struct notifier_block bpq_dev_notifier = {
 106         .notifier_call =bpq_device_event,
 107 };
 108
 109
 110 struct bpqdev {
 111         struct list_head bpq_list;      /* list of bpq devices chain */
 112         struct net_device *ethdev;      /* link to ethernet device */
 113         struct net_device *axdev;       /* bpq device (bpq#) */
 114         char   dest_addr[6];            /* ether destination address */
 115         char   acpt_addr[6];            /* accept ether frames from this address only */
 116 };
 117
 118 static LIST_HEAD(bpq_devices);
 119
 120 /*
 121  * bpqether network devices are paired with ethernet devices below them, so
 122  * form a special "super class" of normal ethernet devices; split their locks
 123  * off into a separate class since they always nest.
 124  */
 125 static struct lock_class_key bpq_netdev_xmit_lock_key;
 126 static struct lock_class_key bpq_netdev_addr_lock_key;
 127
 128 static void bpq_set_lockdep_class_one(struct net_device *dev,
 129                                       struct netdev_queue *txq,
 130                                       void *_unused)
 131 {
 132         lockdep_set_class(&txq->_xmit_lock, &bpq_netdev_xmit_lock_key);
 133 }
 134
 135 static void bpq_set_lockdep_class(struct net_device *dev)
 136 {
 137         lockdep_set_class(&dev->addr_list_lock, &bpq_netdev_addr_lock_key);
 138         netdev_for_each_tx_queue(dev, bpq_set_lockdep_class_one, NULL);
 139 }
 140
 141 /* ------------------------------------------------------------------------ */
 142
 143
 144 /*
 145  *      Get the ethernet device for a BPQ device
 146  */
 147 static inline struct net_device *bpq_get_ether_dev(struct net_device *dev)
 148 {
 149         struct bpqdev *bpq = netdev_priv(dev);
 150
 151         return bpq ? bpq->ethdev : NULL;
 152 }
 153
 154 /*
 155  *      Get the BPQ device for the ethernet device
 156  */
 157 static inline struct net_device *bpq_get_ax25_dev(struct net_device *dev)
 158 {
 159         struct bpqdev *bpq;
 160
 161         list_for_each_entry_rcu(bpq, &bpq_devices, bpq_list) {
 162                 if (bpq->ethdev == dev)
 163                         return bpq->axdev;
 164         }
 165         return NULL;
 166 }
 167
 168 static inline int dev_is_ethdev(struct net_device *dev)
 169 {
 170         return (dev->type == ARPHRD_ETHER && strncmp(dev->name, "dummy", 5));
 171 }
 172
 173 /* ------------------------------------------------------------------------ */
 174
 175
 176 /*
 177  *      Receive an AX.25 frame via an ethernet interface.
 178  */
 179 static int bpq_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *ptype, struct net_device *orig_dev)
 180 {
 181         int len;
 182         char * ptr;
 183         struct ethhdr *eth;
 184         struct bpqdev *bpq;
 185
 186         if (!net_eq(dev_net(dev), &init_net))
 187                 goto drop;
 188
 189         if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL)
 190                 return NET_RX_DROP;
 191
 192         if (!pskb_may_pull(skb, sizeof(struct ethhdr)))
 193                 goto drop;
 194
 195         rcu_read_lock();
 196         dev = bpq_get_ax25_dev(dev);
 197
 198         if (dev == NULL || !netif_running(dev))
 199                 goto drop_unlock;
 200
 201         /*
 202          * if we want to accept frames from just one ethernet device
 203          * we check the source address of the sender.
 204          */
 205
 206         bpq = netdev_priv(dev);
 207
 208         eth = eth_hdr(skb);
 209
 210         if (!(bpq->acpt_addr[0] & 0x01) &&
 211             memcmp(eth->h_source, bpq->acpt_addr, ETH_ALEN))
 212                 goto drop_unlock;
 213
 214         if (skb_cow(skb, sizeof(struct ethhdr)))
 215                 goto drop_unlock;
 216
 217         len = skb->data[0] + skb->data[1] * 256 - 5;
 218
 219         skb_pull(skb, 2);       /* Remove the length bytes */
 220         skb_trim(skb, len);     /* Set the length of the data */
 221
 222         dev->stats.rx_packets++;
 223         dev->stats.rx_bytes += len;
 224
 225         ptr = skb_push(skb, 1);
 226         *ptr = 0;
 227
 228         skb->protocol = ax25_type_trans(skb, dev);
 229         netif_rx(skb);
 230 unlock:
 231
 232         rcu_read_unlock();
 233
 234         return 0;
 235 drop_unlock:
 236         kfree_skb(skb);
 237         goto unlock;
 238
 239 drop:
 240         kfree_skb(skb);
 241         return 0;
 242 }
 243
 244 /*
 245  *      Send an AX.25 frame via an ethernet interface
 246  */
 247 static netdev_tx_t bpq_xmit(struct sk_buff *skb, struct net_device *dev)
 248 {
 249         unsigned char *ptr;
 250         struct bpqdev *bpq;
 251         int size;
 252
 253         /*
 254          * Just to be *really* sure not to send anything if the interface
 255          * is down, the ethernet device may have gone.
 256          */
 257         if (!netif_running(dev)) {
 258                 kfree_skb(skb);
 259                 return NETDEV_TX_OK;
 260         }
 261
 262         skb_pull(skb, 1);                       /* Drop KISS byte */
 263         size = skb->len;
 264
 265         /*
 266          * We're about to mess with the skb which may still shared with the
 267          * generic networking code so unshare and ensure it's got enough
 268          * space for the BPQ headers.
 269          */
 270         if (skb_cow(skb, AX25_BPQ_HEADER_LEN)) {
 271                 if (net_ratelimit())
 272                         pr_err("bpqether: out of memory\n");
 273                 kfree_skb(skb);
 274
 275                 return NETDEV_TX_OK;
 276         }
 277
 278         ptr = skb_push(skb, 2);                 /* Make space for length */
 279
 280         *ptr++ = (size + 5) % 256;
 281         *ptr++ = (size + 5) / 256;
 282
 283         bpq = netdev_priv(dev);
 284
 285         if ((dev = bpq_get_ether_dev(dev)) == NULL) {
 286                 dev->stats.tx_dropped++;
 287                 kfree_skb(skb);
 288                 return NETDEV_TX_OK;
 289         }
 290
 291         skb->protocol = ax25_type_trans(skb, dev);
 292         skb_reset_network_header(skb);
 293         dev_hard_header(skb, dev, ETH_P_BPQ, bpq->dest_addr, NULL, 0);
 294         dev->stats.tx_packets++;
 295         dev->stats.tx_bytes+=skb->len;
 296
 297         dev_queue_xmit(skb);
 298         netif_wake_queue(dev);
 299         return NETDEV_TX_OK;
 300 }
 301
 302 /*
 303  *      Set AX.25 callsign
 304  */
 305 static int bpq_set_mac_address(struct net_device *dev, void *addr)
 306 {
 307     struct sockaddr *sa = (struct sockaddr *)addr;
 308
 309     memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
 310
 311     return 0;
 312 }
 313
 314 /*      Ioctl commands
 315  *
 316  *              SIOCSBPQETHOPT          reserved for enhancements
 317  *              SIOCSBPQETHADDR         set the destination and accepted
 318  *                                      source ethernet address (broadcast
 319  *                                      or multicast: accept all)
 320  */
 321 static int bpq_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 322 {
 323         struct bpq_ethaddr __user *ethaddr = ifr->ifr_data;
 324         struct bpqdev *bpq = netdev_priv(dev);
 325         struct bpq_req req;
 326
 327         if (!capable(CAP_NET_ADMIN))
 328                 return -EPERM;
 329
 330         switch (cmd) {
 331                 case SIOCSBPQETHOPT:
 332                         if (copy_from_user(&req, ifr->ifr_data, sizeof(struct bpq_req)))
 333                                 return -EFAULT;
 334                         switch (req.cmd) {
 335                                 case SIOCGBPQETHPARAM:
 336                                 case SIOCSBPQETHPARAM:
 337                                 default:
 338                                         return -EINVAL;
 339                         }
 340
 341                         break;
 342
 343                 case SIOCSBPQETHADDR:
 344                         if (copy_from_user(bpq->dest_addr, ethaddr->destination, ETH_ALEN))
 345                                 return -EFAULT;
 346                         if (copy_from_user(bpq->acpt_addr, ethaddr->accept, ETH_ALEN))
 347                                 return -EFAULT;
 348                         break;
 349
 350                 default:
 351                         return -EINVAL;
 352         }
 353
 354         return 0;
 355 }
 356
 357 /*
 358  * open/close a device
 359  */
 360 static int bpq_open(struct net_device *dev)
 361 {
 362         netif_start_queue(dev);
 363         return 0;
 364 }
 365
 366 static int bpq_close(struct net_device *dev)
 367 {
 368         netif_stop_queue(dev);
 369         return 0;
 370 }
 371
 372
 373 /* ------------------------------------------------------------------------ */
 374
 375
 376 /*
 377  *      Proc filesystem
 378  */
 379 static void *bpq_seq_start(struct seq_file *seq, loff_t *pos)
 380         __acquires(RCU)
 381 {
 382         int i = 1;
 383         struct bpqdev *bpqdev;
 384
 385         rcu_read_lock();
 386
 387         if (*pos == 0)
 388                 return SEQ_START_TOKEN;
 389
 390         list_for_each_entry_rcu(bpqdev, &bpq_devices, bpq_list) {
 391                 if (i == *pos)
 392                         return bpqdev;
 393         }
 394         return NULL;
 395 }
 396
 397 static void *bpq_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 398 {
 399         struct list_head *p;
 400
 401         ++*pos;
 402
 403         if (v == SEQ_START_TOKEN)
 404                 p = rcu_dereference(bpq_devices.next);
 405         else
 406                 p = rcu_dereference(((struct bpqdev *)v)->bpq_list.next);
 407
 408         return (p == &bpq_devices) ? NULL
 409                 : list_entry(p, struct bpqdev, bpq_list);
 410 }
 411
 412 static void bpq_seq_stop(struct seq_file *seq, void *v)
 413         __releases(RCU)
 414 {
 415         rcu_read_unlock();
 416 }
 417
 418
 419 static int bpq_seq_show(struct seq_file *seq, void *v)
 420 {
 421         if (v == SEQ_START_TOKEN)
 422                 seq_puts(seq,
 423                          "dev   ether      destination        accept from\n");
 424         else {
 425                 const struct bpqdev *bpqdev = v;
 426
 427                 seq_printf(seq, "%-5s %-10s %pM  ",
 428                         bpqdev->axdev->name, bpqdev->ethdev->name,
 429                         bpqdev->dest_addr);
 430
 431                 if (is_multicast_ether_addr(bpqdev->acpt_addr))
 432                         seq_printf(seq, "*\n");
 433                 else
 434                         seq_printf(seq, "%pM\n", bpqdev->acpt_addr);
 435
 436         }
 437         return 0;
 438 }
 439
 440 static const struct seq_operations bpq_seqops = {
 441         .start = bpq_seq_start,
 442         .next = bpq_seq_next,
 443         .stop = bpq_seq_stop,
 444         .show = bpq_seq_show,
 445 };
 446
 447 static int bpq_info_open(struct inode *inode, struct file *file)
 448 {
 449         return seq_open(file, &bpq_seqops);
 450 }
 451
 452 static const struct file_operations bpq_info_fops = {
 453         .owner = THIS_MODULE,
 454         .open = bpq_info_open,
 455         .read = seq_read,
 456         .llseek = seq_lseek,
 457         .release = seq_release,
 458 };
 459
 460
 461 /* ------------------------------------------------------------------------ */
 462
 463 static const struct net_device_ops bpq_netdev_ops = {
 464         .ndo_open            = bpq_open,
 465         .ndo_stop            = bpq_close,
 466         .ndo_start_xmit      = bpq_xmit,
 467         .ndo_set_mac_address = bpq_set_mac_address,
 468         .ndo_do_ioctl        = bpq_ioctl,
 469 };
 470
 471 static void bpq_setup(struct net_device *dev)
 472 {
 473         dev->netdev_ops      = &bpq_netdev_ops;
 474         dev->destructor      = free_netdev;
 475
 476         memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
 477         memcpy(dev->dev_addr,  &ax25_defaddr, AX25_ADDR_LEN);
 478
 479         dev->flags      = 0;
 480
 481 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
 482         dev->header_ops      = &ax25_header_ops;
 483 #endif
 484
 485         dev->type            = ARPHRD_AX25;
 486         dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN;
 487         dev->mtu             = AX25_DEF_PACLEN;
 488         dev->addr_len        = AX25_ADDR_LEN;
 489
 490 }
 491
 492 /*
 493  *      Setup a new device.
 494  */
 495 static int bpq_new_device(struct net_device *edev)
 496 {
 497         int err;
 498         struct net_device *ndev;
 499         struct bpqdev *bpq;
 500
 501         ndev = alloc_netdev(sizeof(struct bpqdev), "bpq%d",
 502                            bpq_setup);
 503         if (!ndev)
 504                 return -ENOMEM;
 505
 506
 507         bpq = netdev_priv(ndev);
 508         dev_hold(edev);
 509         bpq->ethdev = edev;
 510         bpq->axdev = ndev;
 511
 512         memcpy(bpq->dest_addr, bcast_addr, sizeof(bpq_eth_addr));
 513         memcpy(bpq->acpt_addr, bcast_addr, sizeof(bpq_eth_addr));
 514
 515         err = dev_alloc_name(ndev, ndev->name);
 516         if (err < 0)
 517                 goto error;
 518
 519         err = register_netdevice(ndev);
 520         if (err)
 521                 goto error;
 522         bpq_set_lockdep_class(ndev);
 523
 524         /* List protected by RTNL */
 525         list_add_rcu(&bpq->bpq_list, &bpq_devices);
 526         return 0;
 527
 528  error:
 529         dev_put(edev);
 530         free_netdev(ndev);
 531         return err;
 532
 533 }
 534
 535 static void bpq_free_device(struct net_device *ndev)
 536 {
 537         struct bpqdev *bpq = netdev_priv(ndev);
 538
 539         dev_put(bpq->ethdev);
 540         list_del_rcu(&bpq->bpq_list);
 541
 542         unregister_netdevice(ndev);
 543 }
 544
 545 /*
 546  *      Handle device status changes.
 547  */
 548 static int bpq_device_event(struct notifier_block *this,unsigned long event, void *ptr)
 549 {
 550         struct net_device *dev = (struct net_device *)ptr;
 551
 552         if (!net_eq(dev_net(dev), &init_net))
 553                 return NOTIFY_DONE;
 554
 555         if (!dev_is_ethdev(dev))
 556                 return NOTIFY_DONE;
 557
 558         switch (event) {
 559         case NETDEV_UP:         /* new ethernet device -> new BPQ interface */
 560                 if (bpq_get_ax25_dev(dev) == NULL)
 561                         bpq_new_device(dev);
 562                 break;
 563
 564         case NETDEV_DOWN:       /* ethernet device closed -> close BPQ interface */
 565                 if ((dev = bpq_get_ax25_dev(dev)) != NULL)
 566                         dev_close(dev);
 567                 break;
 568
 569         case NETDEV_UNREGISTER: /* ethernet device removed -> free BPQ interface */
 570                 if ((dev = bpq_get_ax25_dev(dev)) != NULL)
 571                         bpq_free_device(dev);
 572                 break;
 573         default:
 574                 break;
 575         }
 576
 577         return NOTIFY_DONE;
 578 }
 579
 580
 581 /* ------------------------------------------------------------------------ */
 582
 583 /*
 584  * Initialize driver. To be called from af_ax25 if not compiled as a
 585  * module
 586  */
 587 static int __init bpq_init_driver(void)
 588 {
 589 #ifdef CONFIG_PROC_FS
 590         if (!proc_net_fops_create(&init_net, "bpqether", S_IRUGO, &bpq_info_fops)) {
 591                 printk(KERN_ERR
 592                         "bpq: cannot create /proc/net/bpqether entry.\n");
 593                 return -ENOENT;
 594         }
 595 #endif  /* CONFIG_PROC_FS */
 596
 597         dev_add_pack(&bpq_packet_type);
 598
 599         register_netdevice_notifier(&bpq_dev_notifier);
 600
 601         printk(banner);
 602
 603         return 0;
 604 }
 605
 606 static void __exit bpq_cleanup_driver(void)
 607 {
 608         struct bpqdev *bpq;
 609
 610         dev_remove_pack(&bpq_packet_type);
 611
 612         unregister_netdevice_notifier(&bpq_dev_notifier);
 613
 614         proc_net_remove(&init_net, "bpqether");
 615
 616         rtnl_lock();
 617         while (!list_empty(&bpq_devices)) {
 618                 bpq = list_entry(bpq_devices.next, struct bpqdev, bpq_list);
 619                 bpq_free_device(bpq->axdev);
 620         }
 621         rtnl_unlock();
 622 }
 623
 624 MODULE_AUTHOR("Joerg Reuter DL1BKE <jreuter@yaina.de>");
 625 MODULE_DESCRIPTION("Transmit and receive AX.25 packets over Ethernet");
 626 MODULE_LICENSE("GPL");
 627 module_init(bpq_init_driver);
 628 module_exit(bpq_cleanup_driver);