]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - drivers/net/ieee802154/atusb.c
projects / mirror_ubuntu-bionic-kernel.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
[mirror_ubuntu-bionic-kernel.git] / drivers / net / ieee802154 / atusb.c
1 /*
2 * atusb.c - Driver for the ATUSB IEEE 802.15.4 dongle
3 *
4 * Written 2013 by Werner Almesberger <werner@almesberger.net>
5 *
6 * Copyright (c) 2015 - 2016 Stefan Schmidt <stefan@datenfreihafen.org>
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation, version 2
11 *
12 * Based on at86rf230.c and spi_atusb.c.
13 * at86rf230.c is
14 * Copyright (C) 2009 Siemens AG
15 * Written by: Dmitry Eremin-Solenikov <dmitry.baryshkov@siemens.com>
16 *
17 * spi_atusb.c is
18 * Copyright (c) 2011 Richard Sharpe <realrichardsharpe@gmail.com>
19 * Copyright (c) 2011 Stefan Schmidt <stefan@datenfreihafen.org>
20 * Copyright (c) 2011 Werner Almesberger <werner@almesberger.net>
21 *
22 * USB initialization is
23 * Copyright (c) 2013 Alexander Aring <alex.aring@gmail.com>
24 *
25 * Busware HUL support is
26 * Copyright (c) 2017 Josef Filzmaier <j.filzmaier@gmx.at>
27 */
28
29 #include <linux/kernel.h>
30 #include <linux/slab.h>
31 #include <linux/module.h>
32 #include <linux/jiffies.h>
33 #include <linux/usb.h>
34 #include <linux/skbuff.h>
35
36 #include <net/cfg802154.h>
37 #include <net/mac802154.h>
38
39 #include "at86rf230.h"
40 #include "atusb.h"
41
42 #define ATUSB_JEDEC_ATMEL 0x1f /* JEDEC manufacturer ID */
43
44 #define ATUSB_NUM_RX_URBS 4 /* allow for a bit of local latency */
45 #define ATUSB_ALLOC_DELAY_MS 100 /* delay after failed allocation */
46 #define ATUSB_TX_TIMEOUT_MS 200 /* on the air timeout */
47
48 struct atusb {
49 struct ieee802154_hw *hw;
50 struct usb_device *usb_dev;
51 struct atusb_chip_data *data;
52 int shutdown; /* non-zero if shutting down */
53 int err; /* set by first error */
54
55 /* RX variables */
56 struct delayed_work work; /* memory allocations */
57 struct usb_anchor idle_urbs; /* URBs waiting to be submitted */
58 struct usb_anchor rx_urbs; /* URBs waiting for reception */
59
60 /* TX variables */
61 struct usb_ctrlrequest tx_dr;
62 struct urb *tx_urb;
63 struct sk_buff *tx_skb;
64 u8 tx_ack_seq; /* current TX ACK sequence number */
65
66 /* Firmware variable */
67 unsigned char fw_ver_maj; /* Firmware major version number */
68 unsigned char fw_ver_min; /* Firmware minor version number */
69 unsigned char fw_hw_type; /* Firmware hardware type */
70 };
71
72 struct atusb_chip_data {
73 u16 t_channel_switch;
74 int rssi_base_val;
75
76 int (*set_channel)(struct ieee802154_hw*, u8, u8);
77 int (*set_txpower)(struct ieee802154_hw*, s32);
78 };
79
80 /* ----- USB commands without data ----------------------------------------- */
81
82 /* To reduce the number of error checks in the code, we record the first error
83 * in atusb->err and reject all subsequent requests until the error is cleared.
84 */
85
86 static int atusb_control_msg(struct atusb *atusb, unsigned int pipe,
87 __u8 request, __u8 requesttype,
88 __u16 value, __u16 index,
89 void *data, __u16 size, int timeout)
90 {
91 struct usb_device *usb_dev = atusb->usb_dev;
92 int ret;
93
94 if (atusb->err)
95 return atusb->err;
96
97 ret = usb_control_msg(usb_dev, pipe, request, requesttype,
98 value, index, data, size, timeout);
99 if (ret < 0) {
100 atusb->err = ret;
101 dev_err(&usb_dev->dev,
102 "%s: req 0x%02x val 0x%x idx 0x%x, error %d\n",
103 __func__, request, value, index, ret);
104 }
105 return ret;
106 }
107
108 static int atusb_command(struct atusb *atusb, u8 cmd, u8 arg)
109 {
110 struct usb_device *usb_dev = atusb->usb_dev;
111
112 dev_dbg(&usb_dev->dev, "%s: cmd = 0x%x\n", __func__, cmd);
113 return atusb_control_msg(atusb, usb_sndctrlpipe(usb_dev, 0),
114 cmd, ATUSB_REQ_TO_DEV, arg, 0, NULL, 0, 1000);
115 }
116
117 static int atusb_write_reg(struct atusb *atusb, u8 reg, u8 value)
118 {
119 struct usb_device *usb_dev = atusb->usb_dev;
120
121 dev_dbg(&usb_dev->dev, "%s: 0x%02x <- 0x%02x\n", __func__, reg, value);
122 return atusb_control_msg(atusb, usb_sndctrlpipe(usb_dev, 0),
123 ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
124 value, reg, NULL, 0, 1000);
125 }
126
127 static int atusb_read_reg(struct atusb *atusb, u8 reg)
128 {
129 struct usb_device *usb_dev = atusb->usb_dev;
130 int ret;
131 u8 *buffer;
132 u8 value;
133
134 buffer = kmalloc(1, GFP_KERNEL);
135 if (!buffer)
136 return -ENOMEM;
137
138 dev_dbg(&usb_dev->dev, "%s: reg = 0x%x\n", __func__, reg);
139 ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
140 ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
141 0, reg, buffer, 1, 1000);
142
143 if (ret >= 0) {
144 value = buffer[0];
145 kfree(buffer);
146 return value;
147 } else {
148 kfree(buffer);
149 return ret;
150 }
151 }
152
153 static int atusb_write_subreg(struct atusb *atusb, u8 reg, u8 mask,
154 u8 shift, u8 value)
155 {
156 struct usb_device *usb_dev = atusb->usb_dev;
157 u8 orig, tmp;
158 int ret = 0;
159
160 dev_dbg(&usb_dev->dev, "%s: 0x%02x <- 0x%02x\n", __func__, reg, value);
161
162 orig = atusb_read_reg(atusb, reg);
163
164 /* Write the value only into that part of the register which is allowed
165 * by the mask. All other bits stay as before.
166 */
167 tmp = orig & ~mask;
168 tmp |= (value << shift) & mask;
169
170 if (tmp != orig)
171 ret = atusb_write_reg(atusb, reg, tmp);
172
173 return ret;
174 }
175
176 static int atusb_read_subreg(struct atusb *lp,
177 unsigned int addr, unsigned int mask,
178 unsigned int shift)
179 {
180 int rc;
181
182 rc = atusb_read_reg(lp, addr);
183 rc = (rc & mask) >> shift;
184
185 return rc;
186 }
187
188 static int atusb_get_and_clear_error(struct atusb *atusb)
189 {
190 int err = atusb->err;
191
192 atusb->err = 0;
193 return err;
194 }
195
196 /* ----- skb allocation ---------------------------------------------------- */
197
198 #define MAX_PSDU 127
199 #define MAX_RX_XFER (1 + MAX_PSDU + 2 + 1) /* PHR+PSDU+CRC+LQI */
200
201 #define SKB_ATUSB(skb) (*(struct atusb **)(skb)->cb)
202
203 static void atusb_in(struct urb *urb);
204
205 static int atusb_submit_rx_urb(struct atusb *atusb, struct urb *urb)
206 {
207 struct usb_device *usb_dev = atusb->usb_dev;
208 struct sk_buff *skb = urb->context;
209 int ret;
210
211 if (!skb) {
212 skb = alloc_skb(MAX_RX_XFER, GFP_KERNEL);
213 if (!skb) {
214 dev_warn_ratelimited(&usb_dev->dev,
215 "atusb_in: can't allocate skb\n");
216 return -ENOMEM;
217 }
218 skb_put(skb, MAX_RX_XFER);
219 SKB_ATUSB(skb) = atusb;
220 }
221
222 usb_fill_bulk_urb(urb, usb_dev, usb_rcvbulkpipe(usb_dev, 1),
223 skb->data, MAX_RX_XFER, atusb_in, skb);
224 usb_anchor_urb(urb, &atusb->rx_urbs);
225
226 ret = usb_submit_urb(urb, GFP_KERNEL);
227 if (ret) {
228 usb_unanchor_urb(urb);
229 kfree_skb(skb);
230 urb->context = NULL;
231 }
232 return ret;
233 }
234
235 static void atusb_work_urbs(struct work_struct *work)
236 {
237 struct atusb *atusb =
238 container_of(to_delayed_work(work), struct atusb, work);
239 struct usb_device *usb_dev = atusb->usb_dev;
240 struct urb *urb;
241 int ret;
242
243 if (atusb->shutdown)
244 return;
245
246 do {
247 urb = usb_get_from_anchor(&atusb->idle_urbs);
248 if (!urb)
249 return;
250 ret = atusb_submit_rx_urb(atusb, urb);
251 } while (!ret);
252
253 usb_anchor_urb(urb, &atusb->idle_urbs);
254 dev_warn_ratelimited(&usb_dev->dev,
255 "atusb_in: can't allocate/submit URB (%d)\n", ret);
256 schedule_delayed_work(&atusb->work,
257 msecs_to_jiffies(ATUSB_ALLOC_DELAY_MS) + 1);
258 }
259
260 /* ----- Asynchronous USB -------------------------------------------------- */
261
262 static void atusb_tx_done(struct atusb *atusb, u8 seq)
263 {
264 struct usb_device *usb_dev = atusb->usb_dev;
265 u8 expect = atusb->tx_ack_seq;
266
267 dev_dbg(&usb_dev->dev, "%s (0x%02x/0x%02x)\n", __func__, seq, expect);
268 if (seq == expect) {
269 /* TODO check for ifs handling in firmware */
270 ieee802154_xmit_complete(atusb->hw, atusb->tx_skb, false);
271 } else {
272 /* TODO I experience this case when atusb has a tx complete
273 * irq before probing, we should fix the firmware it's an
274 * unlikely case now that seq == expect is then true, but can
275 * happen and fail with a tx_skb = NULL;
276 */
277 ieee802154_wake_queue(atusb->hw);
278 if (atusb->tx_skb)
279 dev_kfree_skb_irq(atusb->tx_skb);
280 }
281 }
282
283 static void atusb_in_good(struct urb *urb)
284 {
285 struct usb_device *usb_dev = urb->dev;
286 struct sk_buff *skb = urb->context;
287 struct atusb *atusb = SKB_ATUSB(skb);
288 u8 len, lqi;
289
290 if (!urb->actual_length) {
291 dev_dbg(&usb_dev->dev, "atusb_in: zero-sized URB ?\n");
292 return;
293 }
294
295 len = *skb->data;
296
297 if (urb->actual_length == 1) {
298 atusb_tx_done(atusb, len);
299 return;
300 }
301
302 if (len + 1 > urb->actual_length - 1) {
303 dev_dbg(&usb_dev->dev, "atusb_in: frame len %d+1 > URB %u-1\n",
304 len, urb->actual_length);
305 return;
306 }
307
308 if (!ieee802154_is_valid_psdu_len(len)) {
309 dev_dbg(&usb_dev->dev, "atusb_in: frame corrupted\n");
310 return;
311 }
312
313 lqi = skb->data[len + 1];
314 dev_dbg(&usb_dev->dev, "atusb_in: rx len %d lqi 0x%02x\n", len, lqi);
315 skb_pull(skb, 1); /* remove PHR */
316 skb_trim(skb, len); /* get payload only */
317 ieee802154_rx_irqsafe(atusb->hw, skb, lqi);
318 urb->context = NULL; /* skb is gone */
319 }
320
321 static void atusb_in(struct urb *urb)
322 {
323 struct usb_device *usb_dev = urb->dev;
324 struct sk_buff *skb = urb->context;
325 struct atusb *atusb = SKB_ATUSB(skb);
326
327 dev_dbg(&usb_dev->dev, "%s: status %d len %d\n", __func__,
328 urb->status, urb->actual_length);
329 if (urb->status) {
330 if (urb->status == -ENOENT) { /* being killed */
331 kfree_skb(skb);
332 urb->context = NULL;
333 return;
334 }
335 dev_dbg(&usb_dev->dev, "%s: URB error %d\n", __func__, urb->status);
336 } else {
337 atusb_in_good(urb);
338 }
339
340 usb_anchor_urb(urb, &atusb->idle_urbs);
341 if (!atusb->shutdown)
342 schedule_delayed_work(&atusb->work, 0);
343 }
344
345 /* ----- URB allocation/deallocation --------------------------------------- */
346
347 static void atusb_free_urbs(struct atusb *atusb)
348 {
349 struct urb *urb;
350
351 while (1) {
352 urb = usb_get_from_anchor(&atusb->idle_urbs);
353 if (!urb)
354 break;
355 kfree_skb(urb->context);
356 usb_free_urb(urb);
357 }
358 }
359
360 static int atusb_alloc_urbs(struct atusb *atusb, int n)
361 {
362 struct urb *urb;
363
364 while (n) {
365 urb = usb_alloc_urb(0, GFP_KERNEL);
366 if (!urb) {
367 atusb_free_urbs(atusb);
368 return -ENOMEM;
369 }
370 usb_anchor_urb(urb, &atusb->idle_urbs);
371 n--;
372 }
373 return 0;
374 }
375
376 /* ----- IEEE 802.15.4 interface operations -------------------------------- */
377
378 static void atusb_xmit_complete(struct urb *urb)
379 {
380 dev_dbg(&urb->dev->dev, "atusb_xmit urb completed");
381 }
382
383 static int atusb_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
384 {
385 struct atusb *atusb = hw->priv;
386 struct usb_device *usb_dev = atusb->usb_dev;
387 int ret;
388
389 dev_dbg(&usb_dev->dev, "%s (%d)\n", __func__, skb->len);
390 atusb->tx_skb = skb;
391 atusb->tx_ack_seq++;
392 atusb->tx_dr.wIndex = cpu_to_le16(atusb->tx_ack_seq);
393 atusb->tx_dr.wLength = cpu_to_le16(skb->len);
394
395 usb_fill_control_urb(atusb->tx_urb, usb_dev,
396 usb_sndctrlpipe(usb_dev, 0),
397 (unsigned char *)&atusb->tx_dr, skb->data,
398 skb->len, atusb_xmit_complete, NULL);
399 ret = usb_submit_urb(atusb->tx_urb, GFP_ATOMIC);
400 dev_dbg(&usb_dev->dev, "%s done (%d)\n", __func__, ret);
401 return ret;
402 }
403
404 static int atusb_ed(struct ieee802154_hw *hw, u8 *level)
405 {
406 WARN_ON(!level);
407 *level = 0xbe;
408 return 0;
409 }
410
411 static int atusb_set_hw_addr_filt(struct ieee802154_hw *hw,
412 struct ieee802154_hw_addr_filt *filt,
413 unsigned long changed)
414 {
415 struct atusb *atusb = hw->priv;
416 struct device *dev = &atusb->usb_dev->dev;
417
418 if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
419 u16 addr = le16_to_cpu(filt->short_addr);
420
421 dev_vdbg(dev, "%s called for saddr\n", __func__);
422 atusb_write_reg(atusb, RG_SHORT_ADDR_0, addr);
423 atusb_write_reg(atusb, RG_SHORT_ADDR_1, addr >> 8);
424 }
425
426 if (changed & IEEE802154_AFILT_PANID_CHANGED) {
427 u16 pan = le16_to_cpu(filt->pan_id);
428
429 dev_vdbg(dev, "%s called for pan id\n", __func__);
430 atusb_write_reg(atusb, RG_PAN_ID_0, pan);
431 atusb_write_reg(atusb, RG_PAN_ID_1, pan >> 8);
432 }
433
434 if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
435 u8 i, addr[IEEE802154_EXTENDED_ADDR_LEN];
436
437 memcpy(addr, &filt->ieee_addr, IEEE802154_EXTENDED_ADDR_LEN);
438 dev_vdbg(dev, "%s called for IEEE addr\n", __func__);
439 for (i = 0; i < 8; i++)
440 atusb_write_reg(atusb, RG_IEEE_ADDR_0 + i, addr[i]);
441 }
442
443 if (changed & IEEE802154_AFILT_PANC_CHANGED) {
444 dev_vdbg(dev, "%s called for panc change\n", __func__);
445 if (filt->pan_coord)
446 atusb_write_subreg(atusb, SR_AACK_I_AM_COORD, 1);
447 else
448 atusb_write_subreg(atusb, SR_AACK_I_AM_COORD, 0);
449 }
450
451 return atusb_get_and_clear_error(atusb);
452 }
453
454 static int atusb_start(struct ieee802154_hw *hw)
455 {
456 struct atusb *atusb = hw->priv;
457 struct usb_device *usb_dev = atusb->usb_dev;
458 int ret;
459
460 dev_dbg(&usb_dev->dev, "%s\n", __func__);
461 schedule_delayed_work(&atusb->work, 0);
462 atusb_command(atusb, ATUSB_RX_MODE, 1);
463 ret = atusb_get_and_clear_error(atusb);
464 if (ret < 0)
465 usb_kill_anchored_urbs(&atusb->idle_urbs);
466 return ret;
467 }
468
469 static void atusb_stop(struct ieee802154_hw *hw)
470 {
471 struct atusb *atusb = hw->priv;
472 struct usb_device *usb_dev = atusb->usb_dev;
473
474 dev_dbg(&usb_dev->dev, "%s\n", __func__);
475 usb_kill_anchored_urbs(&atusb->idle_urbs);
476 atusb_command(atusb, ATUSB_RX_MODE, 0);
477 atusb_get_and_clear_error(atusb);
478 }
479
480 #define ATUSB_MAX_TX_POWERS 0xF
481 static const s32 atusb_powers[ATUSB_MAX_TX_POWERS + 1] = {
482 300, 280, 230, 180, 130, 70, 0, -100, -200, -300, -400, -500, -700,
483 -900, -1200, -1700,
484 };
485
486 static int
487 atusb_txpower(struct ieee802154_hw *hw, s32 mbm)
488 {
489 struct atusb *atusb = hw->priv;
490
491 if (atusb->data)
492 return atusb->data->set_txpower(hw, mbm);
493 else
494 return -ENOTSUPP;
495 }
496
497 static int
498 atusb_set_txpower(struct ieee802154_hw *hw, s32 mbm)
499 {
500 struct atusb *atusb = hw->priv;
501 u32 i;
502
503 for (i = 0; i < hw->phy->supported.tx_powers_size; i++) {
504 if (hw->phy->supported.tx_powers[i] == mbm)
505 return atusb_write_subreg(atusb, SR_TX_PWR_23X, i);
506 }
507
508 return -EINVAL;
509 }
510
511 static int
512 hulusb_set_txpower(struct ieee802154_hw *hw, s32 mbm)
513 {
514 u32 i;
515
516 for (i = 0; i < hw->phy->supported.tx_powers_size; i++) {
517 if (hw->phy->supported.tx_powers[i] == mbm)
518 return atusb_write_subreg(hw->priv, SR_TX_PWR_212, i);
519 }
520
521 return -EINVAL;
522 }
523
524 #define ATUSB_MAX_ED_LEVELS 0xF
525 static const s32 atusb_ed_levels[ATUSB_MAX_ED_LEVELS + 1] = {
526 -9100, -8900, -8700, -8500, -8300, -8100, -7900, -7700, -7500, -7300,
527 -7100, -6900, -6700, -6500, -6300, -6100,
528 };
529
530 #define AT86RF212_MAX_TX_POWERS 0x1F
531 static const s32 at86rf212_powers[AT86RF212_MAX_TX_POWERS + 1] = {
532 500, 400, 300, 200, 100, 0, -100, -200, -300, -400, -500, -600, -700,
533 -800, -900, -1000, -1100, -1200, -1300, -1400, -1500, -1600, -1700,
534 -1800, -1900, -2000, -2100, -2200, -2300, -2400, -2500, -2600,
535 };
536
537 #define AT86RF2XX_MAX_ED_LEVELS 0xF
538 static const s32 at86rf212_ed_levels_100[AT86RF2XX_MAX_ED_LEVELS + 1] = {
539 -10000, -9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200,
540 -8000, -7800, -7600, -7400, -7200, -7000,
541 };
542
543 static const s32 at86rf212_ed_levels_98[AT86RF2XX_MAX_ED_LEVELS + 1] = {
544 -9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200, -8000,
545 -7800, -7600, -7400, -7200, -7000, -6800,
546 };
547
548 static int
549 atusb_set_cca_mode(struct ieee802154_hw *hw, const struct wpan_phy_cca *cca)
550 {
551 struct atusb *atusb = hw->priv;
552 u8 val;
553
554 /* mapping 802.15.4 to driver spec */
555 switch (cca->mode) {
556 case NL802154_CCA_ENERGY:
557 val = 1;
558 break;
559 case NL802154_CCA_CARRIER:
560 val = 2;
561 break;
562 case NL802154_CCA_ENERGY_CARRIER:
563 switch (cca->opt) {
564 case NL802154_CCA_OPT_ENERGY_CARRIER_AND:
565 val = 3;
566 break;
567 case NL802154_CCA_OPT_ENERGY_CARRIER_OR:
568 val = 0;
569 break;
570 default:
571 return -EINVAL;
572 }
573 break;
574 default:
575 return -EINVAL;
576 }
577
578 return atusb_write_subreg(atusb, SR_CCA_MODE, val);
579 }
580
581 static int hulusb_set_cca_ed_level(struct atusb *lp, int rssi_base_val)
582 {
583 unsigned int cca_ed_thres;
584
585 cca_ed_thres = atusb_read_subreg(lp, SR_CCA_ED_THRES);
586
587 switch (rssi_base_val) {
588 case -98:
589 lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_98;
590 lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_98);
591 lp->hw->phy->cca_ed_level = at86rf212_ed_levels_98[cca_ed_thres];
592 break;
593 case -100:
594 lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100;
595 lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100);
596 lp->hw->phy->cca_ed_level = at86rf212_ed_levels_100[cca_ed_thres];
597 break;
598 default:
599 WARN_ON(1);
600 }
601
602 return 0;
603 }
604
605 static int
606 atusb_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
607 {
608 struct atusb *atusb = hw->priv;
609 u32 i;
610
611 for (i = 0; i < hw->phy->supported.cca_ed_levels_size; i++) {
612 if (hw->phy->supported.cca_ed_levels[i] == mbm)
613 return atusb_write_subreg(atusb, SR_CCA_ED_THRES, i);
614 }
615
616 return -EINVAL;
617 }
618
619 static int atusb_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
620 {
621 struct atusb *atusb = hw->priv;
622 int ret = -ENOTSUPP;
623
624 if (atusb->data) {
625 ret = atusb->data->set_channel(hw, page, channel);
626 /* @@@ ugly synchronization */
627 msleep(atusb->data->t_channel_switch);
628 }
629
630 return ret;
631 }
632
633 static int atusb_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
634 {
635 struct atusb *atusb = hw->priv;
636 int ret;
637
638 ret = atusb_write_subreg(atusb, SR_CHANNEL, channel);
639 if (ret < 0)
640 return ret;
641 return 0;
642 }
643
644 static int hulusb_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
645 {
646 int rc;
647 int rssi_base_val;
648
649 struct atusb *lp = hw->priv;
650
651 if (channel == 0)
652 rc = atusb_write_subreg(lp, SR_SUB_MODE, 0);
653 else
654 rc = atusb_write_subreg(lp, SR_SUB_MODE, 1);
655 if (rc < 0)
656 return rc;
657
658 if (page == 0) {
659 rc = atusb_write_subreg(lp, SR_BPSK_QPSK, 0);
660 rssi_base_val = -100;
661 } else {
662 rc = atusb_write_subreg(lp, SR_BPSK_QPSK, 1);
663 rssi_base_val = -98;
664 }
665 if (rc < 0)
666 return rc;
667
668 rc = hulusb_set_cca_ed_level(lp, rssi_base_val);
669 if (rc < 0)
670 return rc;
671
672 /* This sets the symbol_duration according frequency on the 212.
673 * TODO move this handling while set channel and page in cfg802154.
674 * We can do that, this timings are according 802.15.4 standard.
675 * If we do that in cfg802154, this is a more generic calculation.
676 *
677 * This should also protected from ifs_timer. Means cancel timer and
678 * init with a new value. For now, this is okay.
679 */
680 if (channel == 0) {
681 if (page == 0) {
682 /* SUB:0 and BPSK:0 -> BPSK-20 */
683 lp->hw->phy->symbol_duration = 50;
684 } else {
685 /* SUB:1 and BPSK:0 -> BPSK-40 */
686 lp->hw->phy->symbol_duration = 25;
687 }
688 } else {
689 if (page == 0)
690 /* SUB:0 and BPSK:1 -> OQPSK-100/200/400 */
691 lp->hw->phy->symbol_duration = 40;
692 else
693 /* SUB:1 and BPSK:1 -> OQPSK-250/500/1000 */
694 lp->hw->phy->symbol_duration = 16;
695 }
696
697 lp->hw->phy->lifs_period = IEEE802154_LIFS_PERIOD *
698 lp->hw->phy->symbol_duration;
699 lp->hw->phy->sifs_period = IEEE802154_SIFS_PERIOD *
700 lp->hw->phy->symbol_duration;
701
702 return atusb_write_subreg(lp, SR_CHANNEL, channel);
703 }
704
705 static int
706 atusb_set_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be, u8 retries)
707 {
708 struct atusb *atusb = hw->priv;
709 int ret;
710
711 ret = atusb_write_subreg(atusb, SR_MIN_BE, min_be);
712 if (ret)
713 return ret;
714
715 ret = atusb_write_subreg(atusb, SR_MAX_BE, max_be);
716 if (ret)
717 return ret;
718
719 return atusb_write_subreg(atusb, SR_MAX_CSMA_RETRIES, retries);
720 }
721
722 static int
723 hulusb_set_lbt(struct ieee802154_hw *hw, bool on)
724 {
725 struct atusb *atusb = hw->priv;
726
727 return atusb_write_subreg(atusb, SR_CSMA_LBT_MODE, on);
728 }
729
730 static int
731 atusb_set_frame_retries(struct ieee802154_hw *hw, s8 retries)
732 {
733 struct atusb *atusb = hw->priv;
734
735 return atusb_write_subreg(atusb, SR_MAX_FRAME_RETRIES, retries);
736 }
737
738 static int
739 atusb_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
740 {
741 struct atusb *atusb = hw->priv;
742 int ret;
743
744 if (on) {
745 ret = atusb_write_subreg(atusb, SR_AACK_DIS_ACK, 1);
746 if (ret < 0)
747 return ret;
748
749 ret = atusb_write_subreg(atusb, SR_AACK_PROM_MODE, 1);
750 if (ret < 0)
751 return ret;
752 } else {
753 ret = atusb_write_subreg(atusb, SR_AACK_PROM_MODE, 0);
754 if (ret < 0)
755 return ret;
756
757 ret = atusb_write_subreg(atusb, SR_AACK_DIS_ACK, 0);
758 if (ret < 0)
759 return ret;
760 }
761
762 return 0;
763 }
764
765 static struct atusb_chip_data atusb_chip_data = {
766 .t_channel_switch = 1,
767 .rssi_base_val = -91,
768 .set_txpower = atusb_set_txpower,
769 .set_channel = atusb_set_channel,
770 };
771
772 static struct atusb_chip_data hulusb_chip_data = {
773 .t_channel_switch = 11,
774 .rssi_base_val = -100,
775 .set_txpower = hulusb_set_txpower,
776 .set_channel = hulusb_set_channel,
777 };
778
779 static const struct ieee802154_ops atusb_ops = {
780 .owner = THIS_MODULE,
781 .xmit_async = atusb_xmit,
782 .ed = atusb_ed,
783 .set_channel = atusb_channel,
784 .start = atusb_start,
785 .stop = atusb_stop,
786 .set_hw_addr_filt = atusb_set_hw_addr_filt,
787 .set_txpower = atusb_txpower,
788 .set_lbt = hulusb_set_lbt,
789 .set_cca_mode = atusb_set_cca_mode,
790 .set_cca_ed_level = atusb_set_cca_ed_level,
791 .set_csma_params = atusb_set_csma_params,
792 .set_frame_retries = atusb_set_frame_retries,
793 .set_promiscuous_mode = atusb_set_promiscuous_mode,
794 };
795
796 /* ----- Firmware and chip version information ----------------------------- */
797
798 static int atusb_get_and_show_revision(struct atusb *atusb)
799 {
800 struct usb_device *usb_dev = atusb->usb_dev;
801 char *hw_name;
802 unsigned char *buffer;
803 int ret;
804
805 buffer = kmalloc(3, GFP_KERNEL);
806 if (!buffer)
807 return -ENOMEM;
808
809 /* Get a couple of the ATMega Firmware values */
810 ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
811 ATUSB_ID, ATUSB_REQ_FROM_DEV, 0, 0,
812 buffer, 3, 1000);
813 if (ret >= 0) {
814 atusb->fw_ver_maj = buffer[0];
815 atusb->fw_ver_min = buffer[1];
816 atusb->fw_hw_type = buffer[2];
817
818 switch (atusb->fw_hw_type) {
819 case ATUSB_HW_TYPE_100813:
820 case ATUSB_HW_TYPE_101216:
821 case ATUSB_HW_TYPE_110131:
822 hw_name = "ATUSB";
823 atusb->data = &atusb_chip_data;
824 break;
825 case ATUSB_HW_TYPE_RZUSB:
826 hw_name = "RZUSB";
827 atusb->data = &atusb_chip_data;
828 break;
829 case ATUSB_HW_TYPE_HULUSB:
830 hw_name = "HULUSB";
831 atusb->data = &hulusb_chip_data;
832 break;
833 default:
834 hw_name = "UNKNOWN";
835 atusb->err = -ENOTSUPP;
836 ret = -ENOTSUPP;
837 break;
838 }
839
840 dev_info(&usb_dev->dev,
841 "Firmware: major: %u, minor: %u, hardware type: %s (%d)\n",
842 atusb->fw_ver_maj, atusb->fw_ver_min, hw_name,
843 atusb->fw_hw_type);
844 }
845 if (atusb->fw_ver_maj == 0 && atusb->fw_ver_min < 2) {
846 dev_info(&usb_dev->dev,
847 "Firmware version (%u.%u) predates our first public release.",
848 atusb->fw_ver_maj, atusb->fw_ver_min);
849 dev_info(&usb_dev->dev, "Please update to version 0.2 or newer");
850 }
851
852 kfree(buffer);
853 return ret;
854 }
855
856 static int atusb_get_and_show_build(struct atusb *atusb)
857 {
858 struct usb_device *usb_dev = atusb->usb_dev;
859 char *build;
860 int ret;
861
862 build = kmalloc(ATUSB_BUILD_SIZE + 1, GFP_KERNEL);
863 if (!build)
864 return -ENOMEM;
865
866 ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
867 ATUSB_BUILD, ATUSB_REQ_FROM_DEV, 0, 0,
868 build, ATUSB_BUILD_SIZE, 1000);
869 if (ret >= 0) {
870 build[ret] = 0;
871 dev_info(&usb_dev->dev, "Firmware: build %s\n", build);
872 }
873
874 kfree(build);
875 return ret;
876 }
877
878 static int atusb_get_and_conf_chip(struct atusb *atusb)
879 {
880 struct usb_device *usb_dev = atusb->usb_dev;
881 u8 man_id_0, man_id_1, part_num, version_num;
882 const char *chip;
883 struct ieee802154_hw *hw = atusb->hw;
884
885 man_id_0 = atusb_read_reg(atusb, RG_MAN_ID_0);
886 man_id_1 = atusb_read_reg(atusb, RG_MAN_ID_1);
887 part_num = atusb_read_reg(atusb, RG_PART_NUM);
888 version_num = atusb_read_reg(atusb, RG_VERSION_NUM);
889
890 if (atusb->err)
891 return atusb->err;
892
893 hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT |
894 IEEE802154_HW_PROMISCUOUS | IEEE802154_HW_CSMA_PARAMS;
895
896 hw->phy->flags = WPAN_PHY_FLAG_TXPOWER | WPAN_PHY_FLAG_CCA_ED_LEVEL |
897 WPAN_PHY_FLAG_CCA_MODE;
898
899 hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) |
900 BIT(NL802154_CCA_CARRIER) |
901 BIT(NL802154_CCA_ENERGY_CARRIER);
902 hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND) |
903 BIT(NL802154_CCA_OPT_ENERGY_CARRIER_OR);
904
905 hw->phy->cca.mode = NL802154_CCA_ENERGY;
906
907 hw->phy->current_page = 0;
908
909 if ((man_id_1 << 8 | man_id_0) != ATUSB_JEDEC_ATMEL) {
910 dev_err(&usb_dev->dev,
911 "non-Atmel transceiver xxxx%02x%02x\n",
912 man_id_1, man_id_0);
913 goto fail;
914 }
915
916 switch (part_num) {
917 case 2:
918 chip = "AT86RF230";
919 atusb->hw->phy->supported.channels[0] = 0x7FFF800;
920 atusb->hw->phy->current_channel = 11; /* reset default */
921 atusb->hw->phy->symbol_duration = 16;
922 atusb->hw->phy->supported.tx_powers = atusb_powers;
923 atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(atusb_powers);
924 hw->phy->supported.cca_ed_levels = atusb_ed_levels;
925 hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(atusb_ed_levels);
926 break;
927 case 3:
928 chip = "AT86RF231";
929 atusb->hw->phy->supported.channels[0] = 0x7FFF800;
930 atusb->hw->phy->current_channel = 11; /* reset default */
931 atusb->hw->phy->symbol_duration = 16;
932 atusb->hw->phy->supported.tx_powers = atusb_powers;
933 atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(atusb_powers);
934 hw->phy->supported.cca_ed_levels = atusb_ed_levels;
935 hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(atusb_ed_levels);
936 break;
937 case 7:
938 chip = "AT86RF212";
939 atusb->hw->flags |= IEEE802154_HW_LBT;
940 atusb->hw->phy->supported.channels[0] = 0x00007FF;
941 atusb->hw->phy->supported.channels[2] = 0x00007FF;
942 atusb->hw->phy->current_channel = 5;
943 atusb->hw->phy->symbol_duration = 25;
944 atusb->hw->phy->supported.lbt = NL802154_SUPPORTED_BOOL_BOTH;
945 atusb->hw->phy->supported.tx_powers = at86rf212_powers;
946 atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf212_powers);
947 atusb->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100;
948 atusb->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100);
949 break;
950 default:
951 dev_err(&usb_dev->dev,
952 "unexpected transceiver, part 0x%02x version 0x%02x\n",
953 part_num, version_num);
954 goto fail;
955 }
956
957 hw->phy->transmit_power = hw->phy->supported.tx_powers[0];
958 hw->phy->cca_ed_level = hw->phy->supported.cca_ed_levels[7];
959
960 dev_info(&usb_dev->dev, "ATUSB: %s version %d\n", chip, version_num);
961
962 return 0;
963
964 fail:
965 atusb->err = -ENODEV;
966 return -ENODEV;
967 }
968
969 static int atusb_set_extended_addr(struct atusb *atusb)
970 {
971 struct usb_device *usb_dev = atusb->usb_dev;
972 unsigned char *buffer;
973 __le64 extended_addr;
974 u64 addr;
975 int ret;
976
977 /* Firmware versions before 0.3 do not support the EUI64_READ command.
978 * Just use a random address and be done.
979 */
980 if (atusb->fw_ver_maj == 0 && atusb->fw_ver_min < 3) {
981 ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr);
982 return 0;
983 }
984
985 buffer = kmalloc(IEEE802154_EXTENDED_ADDR_LEN, GFP_KERNEL);
986 if (!buffer)
987 return -ENOMEM;
988
989 /* Firmware is new enough so we fetch the address from EEPROM */
990 ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
991 ATUSB_EUI64_READ, ATUSB_REQ_FROM_DEV, 0, 0,
992 buffer, IEEE802154_EXTENDED_ADDR_LEN, 1000);
993 if (ret < 0) {
994 dev_err(&usb_dev->dev, "failed to fetch extended address, random address set\n");
995 ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr);
996 kfree(buffer);
997 return ret;
998 }
999
1000 memcpy(&extended_addr, buffer, IEEE802154_EXTENDED_ADDR_LEN);
1001 /* Check if read address is not empty and the unicast bit is set correctly */
1002 if (!ieee802154_is_valid_extended_unicast_addr(extended_addr)) {
1003 dev_info(&usb_dev->dev, "no permanent extended address found, random address set\n");
1004 ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr);
1005 } else {
1006 atusb->hw->phy->perm_extended_addr = extended_addr;
1007 addr = swab64((__force u64)atusb->hw->phy->perm_extended_addr);
1008 dev_info(&usb_dev->dev, "Read permanent extended address %8phC from device\n",
1009 &addr);
1010 }
1011
1012 kfree(buffer);
1013 return ret;
1014 }
1015
1016 /* ----- Setup ------------------------------------------------------------- */
1017
1018 static int atusb_probe(struct usb_interface *interface,
1019 const struct usb_device_id *id)
1020 {
1021 struct usb_device *usb_dev = interface_to_usbdev(interface);
1022 struct ieee802154_hw *hw;
1023 struct atusb *atusb = NULL;
1024 int ret = -ENOMEM;
1025
1026 hw = ieee802154_alloc_hw(sizeof(struct atusb), &atusb_ops);
1027 if (!hw)
1028 return -ENOMEM;
1029
1030 atusb = hw->priv;
1031 atusb->hw = hw;
1032 atusb->usb_dev = usb_get_dev(usb_dev);
1033 usb_set_intfdata(interface, atusb);
1034
1035 atusb->shutdown = 0;
1036 atusb->err = 0;
1037 INIT_DELAYED_WORK(&atusb->work, atusb_work_urbs);
1038 init_usb_anchor(&atusb->idle_urbs);
1039 init_usb_anchor(&atusb->rx_urbs);
1040
1041 if (atusb_alloc_urbs(atusb, ATUSB_NUM_RX_URBS))
1042 goto fail;
1043
1044 atusb->tx_dr.bRequestType = ATUSB_REQ_TO_DEV;
1045 atusb->tx_dr.bRequest = ATUSB_TX;
1046 atusb->tx_dr.wValue = cpu_to_le16(0);
1047
1048 atusb->tx_urb = usb_alloc_urb(0, GFP_ATOMIC);
1049 if (!atusb->tx_urb)
1050 goto fail;
1051
1052 hw->parent = &usb_dev->dev;
1053
1054 atusb_command(atusb, ATUSB_RF_RESET, 0);
1055 atusb_get_and_conf_chip(atusb);
1056 atusb_get_and_show_revision(atusb);
1057 atusb_get_and_show_build(atusb);
1058 atusb_set_extended_addr(atusb);
1059
1060 if ((atusb->fw_ver_maj == 0 && atusb->fw_ver_min >= 3) || atusb->fw_ver_maj > 0)
1061 hw->flags |= IEEE802154_HW_FRAME_RETRIES;
1062
1063 ret = atusb_get_and_clear_error(atusb);
1064 if (ret) {
1065 dev_err(&atusb->usb_dev->dev,
1066 "%s: initialization failed, error = %d\n",
1067 __func__, ret);
1068 goto fail;
1069 }
1070
1071 ret = ieee802154_register_hw(hw);
1072 if (ret)
1073 goto fail;
1074
1075 /* If we just powered on, we're now in P_ON and need to enter TRX_OFF
1076 * explicitly. Any resets after that will send us straight to TRX_OFF,
1077 * making the command below redundant.
1078 */
1079 atusb_write_reg(atusb, RG_TRX_STATE, STATE_FORCE_TRX_OFF);
1080 msleep(1); /* reset => TRX_OFF, tTR13 = 37 us */
1081
1082 #if 0
1083 /* Calculating the maximum time available to empty the frame buffer
1084 * on reception:
1085 *
1086 * According to [1], the inter-frame gap is
1087 * R * 20 * 16 us + 128 us
1088 * where R is a random number from 0 to 7. Furthermore, we have 20 bit
1089 * times (80 us at 250 kbps) of SHR of the next frame before the
1090 * transceiver begins storing data in the frame buffer.
1091 *
1092 * This yields a minimum time of 208 us between the last data of a
1093 * frame and the first data of the next frame. This time is further
1094 * reduced by interrupt latency in the atusb firmware.
1095 *
1096 * atusb currently needs about 500 us to retrieve a maximum-sized
1097 * frame. We therefore have to allow reception of a new frame to begin
1098 * while we retrieve the previous frame.
1099 *
1100 * [1] "JN-AN-1035 Calculating data rates in an IEEE 802.15.4-based
1101 * network", Jennic 2006.
1102 * http://www.jennic.com/download_file.php?supportFile=JN-AN-1035%20Calculating%20802-15-4%20Data%20Rates-1v0.pdf
1103 */
1104
1105 atusb_write_subreg(atusb, SR_RX_SAFE_MODE, 1);
1106 #endif
1107 atusb_write_reg(atusb, RG_IRQ_MASK, 0xff);
1108
1109 ret = atusb_get_and_clear_error(atusb);
1110 if (!ret)
1111 return 0;
1112
1113 dev_err(&atusb->usb_dev->dev,
1114 "%s: setup failed, error = %d\n",
1115 __func__, ret);
1116
1117 ieee802154_unregister_hw(hw);
1118 fail:
1119 atusb_free_urbs(atusb);
1120 usb_kill_urb(atusb->tx_urb);
1121 usb_free_urb(atusb->tx_urb);
1122 usb_put_dev(usb_dev);
1123 ieee802154_free_hw(hw);
1124 return ret;
1125 }
1126
1127 static void atusb_disconnect(struct usb_interface *interface)
1128 {
1129 struct atusb *atusb = usb_get_intfdata(interface);
1130
1131 dev_dbg(&atusb->usb_dev->dev, "%s\n", __func__);
1132
1133 atusb->shutdown = 1;
1134 cancel_delayed_work_sync(&atusb->work);
1135
1136 usb_kill_anchored_urbs(&atusb->rx_urbs);
1137 atusb_free_urbs(atusb);
1138 usb_kill_urb(atusb->tx_urb);
1139 usb_free_urb(atusb->tx_urb);
1140
1141 ieee802154_unregister_hw(atusb->hw);
1142
1143 ieee802154_free_hw(atusb->hw);
1144
1145 usb_set_intfdata(interface, NULL);
1146 usb_put_dev(atusb->usb_dev);
1147
1148 pr_debug("%s done\n", __func__);
1149 }
1150
1151 /* The devices we work with */
1152 static const struct usb_device_id atusb_device_table[] = {
1153 {
1154 .match_flags = USB_DEVICE_ID_MATCH_DEVICE |
1155 USB_DEVICE_ID_MATCH_INT_INFO,
1156 .idVendor = ATUSB_VENDOR_ID,
1157 .idProduct = ATUSB_PRODUCT_ID,
1158 .bInterfaceClass = USB_CLASS_VENDOR_SPEC
1159 },
1160 /* end with null element */
1161 {}
1162 };
1163 MODULE_DEVICE_TABLE(usb, atusb_device_table);
1164
1165 static struct usb_driver atusb_driver = {
1166 .name = "atusb",
1167 .probe = atusb_probe,
1168 .disconnect = atusb_disconnect,
1169 .id_table = atusb_device_table,
1170 };
1171 module_usb_driver(atusb_driver);
1172
1173 MODULE_AUTHOR("Alexander Aring <alex.aring@gmail.com>");
1174 MODULE_AUTHOR("Richard Sharpe <realrichardsharpe@gmail.com>");
1175 MODULE_AUTHOR("Stefan Schmidt <stefan@datenfreihafen.org>");
1176 MODULE_AUTHOR("Werner Almesberger <werner@almesberger.net>");
1177 MODULE_AUTHOR("Josef Filzmaier <j.filzmaier@gmx.at>");
1178 MODULE_DESCRIPTION("ATUSB IEEE 802.15.4 Driver");
1179 MODULE_LICENSE("GPL");
ubuntu-bionic-kernel mirror