drivers/net/irda/Kconfig

   1 menu "Infrared-port device drivers"
   2         depends on IRDA!=n
   3
   4 comment "SIR device drivers"
   5
   6 config IRTTY_SIR
   7         tristate "IrTTY (uses Linux serial driver)"
   8         depends on IRDA
   9         help
  10           Say Y here if you want to build support for the IrTTY line
  11           discipline.  To compile it as a module, choose M here: the module
  12           will be called irtty-sir. IrTTY makes it possible to use Linux's
  13           own serial driver for all IrDA ports that are 16550 compatible.
  14           Most IrDA chips are 16550 compatible so you should probably say Y
  15           to this option.  Using IrTTY will however limit the speed of the
  16           connection to 115200 bps (IrDA SIR mode).
  17
  18           If unsure, say Y.
  19
  20 comment "Dongle support"
  21
  22 config DONGLE
  23         bool "Serial dongle support"
  24         depends on IRTTY_SIR
  25         help
  26           Say Y here if you have an infrared device that connects to your
  27           computer's serial port. These devices are called dongles. Then say Y
  28           or M to the driver for your particular dongle below.
  29
  30           Note that the answer to this question won't directly affect the
  31           kernel: saying N will just cause the configurator to skip all
  32           the questions about serial dongles.
  33
  34 config ESI_DONGLE
  35         tristate "ESI JetEye PC dongle"
  36         depends on IRTTY_SIR && DONGLE && IRDA
  37         help
  38           Say Y here if you want to build support for the Extended Systems
  39           JetEye PC dongle.  To compile it as a module, choose M here. The ESI
  40           dongle attaches to the normal 9-pin serial port connector, and can
  41           currently only be used by IrTTY.  To activate support for ESI
  42           dongles you will have to start irattach like this:
  43           "irattach -d esi".
  44
  45 config ACTISYS_DONGLE
  46         tristate "ACTiSYS IR-220L and IR220L+ dongle"
  47         depends on IRTTY_SIR && DONGLE && IRDA
  48         help
  49           Say Y here if you want to build support for the ACTiSYS IR-220L and
  50           IR220L+ dongles.  To compile it as a module, choose M here. The
  51           ACTiSYS dongles attaches to the normal 9-pin serial port connector,
  52           and can currently only be used by IrTTY.  To activate support for
  53           ACTiSYS dongles you will have to start irattach like this:
  54           "irattach -d actisys" or "irattach -d actisys+".
  55
  56 config TEKRAM_DONGLE
  57         tristate "Tekram IrMate 210B dongle"
  58         depends on IRTTY_SIR && DONGLE && IRDA
  59         help
  60           Say Y here if you want to build support for the Tekram IrMate 210B
  61           dongle.  To compile it as a module, choose M here. The Tekram dongle
  62           attaches to the normal 9-pin serial port connector, and can
  63           currently only be used by IrTTY.  To activate support for Tekram
  64           dongles you will have to start irattach like this:
  65           "irattach -d tekram".
  66
  67 config TOIM3232_DONGLE
  68         tristate "TOIM3232 IrDa dongle"
  69         depends on IRTTY_SIR && DONGLE && IRDA
  70         help
  71           Say Y here if you want to build support for the Vishay/Temic
  72           TOIM3232 and TOIM4232 based dongles.
  73           To compile it as a module, choose M here.
  74
  75 config LITELINK_DONGLE
  76         tristate "Parallax LiteLink dongle"
  77         depends on IRTTY_SIR && DONGLE && IRDA
  78         help
  79           Say Y here if you want to build support for the Parallax Litelink
  80           dongle.  To compile it as a module, choose M here.  The Parallax
  81           dongle attaches to the normal 9-pin serial port connector, and can
  82           currently only be used by IrTTY.  To activate support for Parallax
  83           dongles you will have to start irattach like this:
  84           "irattach -d litelink".
  85
  86 config MA600_DONGLE
  87         tristate "Mobile Action MA600 dongle"
  88         depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
  89         help
  90           Say Y here if you want to build support for the Mobile Action MA600
  91           dongle.  To compile it as a module, choose M here. The MA600 dongle
  92           attaches to the normal 9-pin serial port connector, and can
  93           currently only be used by IrTTY.  The driver should also support
  94           the MA620 USB version of the dongle, if the integrated USB-to-RS232
  95           converter is supported by usbserial. To activate support for
  96           MA600 dongle you will have to start irattach like this:
  97           "irattach -d ma600".
  98
  99 config GIRBIL_DONGLE
 100         tristate "Greenwich GIrBIL dongle"
 101         depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 102         help
 103           Say Y here if you want to build support for the Greenwich GIrBIL
 104           dongle.  If you want to compile it as a module, choose M here.
 105           The Greenwich dongle attaches to the normal 9-pin serial port
 106           connector, and can currently only be used by IrTTY.  To activate
 107           support for Greenwich dongles you will have to start irattach
 108           like this: "irattach -d girbil".
 109
 110 config MCP2120_DONGLE
 111         tristate "Microchip MCP2120"
 112         depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 113         help
 114           Say Y here if you want to build support for the Microchip MCP2120
 115           dongle.  If you want to compile it as a module, choose M here.
 116           The MCP2120 dongle attaches to the normal 9-pin serial port
 117           connector, and can currently only be used by IrTTY.  To activate
 118           support for MCP2120 dongles you will have to start irattach
 119           like this: "irattach -d mcp2120".
 120
 121           You must build this dongle yourself.  For more information see:
 122           <http://www.eyetap.org/~tangf/irda_sir_linux.html>
 123
 124 config OLD_BELKIN_DONGLE
 125         tristate "Old Belkin dongle"
 126         depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 127         help
 128           Say Y here if you want to build support for the Adaptec Airport 1000
 129           and 2000 dongles.  If you want to compile it as a module, choose
 130           M here. Some information is contained in the comments
 131           at the top of <file:drivers/net/irda/old_belkin.c>.
 132
 133 config ACT200L_DONGLE
 134         tristate "ACTiSYS IR-200L dongle"
 135         depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 136         help
 137           Say Y here if you want to build support for the ACTiSYS IR-200L
 138           dongle. If you want to compile it as a module, choose M here.
 139           The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
 140           port connector, and can currently only be used by IrTTY.
 141           To activate support for ACTiSYS IR-200L dongle you will have to
 142           start irattach like this: "irattach -d act200l".
 143
 144 config KINGSUN_DONGLE
 145         tristate "KingSun/DonShine DS-620 IrDA-USB dongle"
 146         depends on IRDA && USB && EXPERIMENTAL
 147         help
 148           Say Y or M here if you want to build support for the KingSun/DonShine
 149           DS-620 IrDA-USB bridge device driver.
 150
 151           This USB bridge does not conform to the IrDA-USB device class
 152           specification, and therefore needs its own specific driver. This
 153           dongle supports SIR speed only (9600 bps).
 154
 155           To compile it as a module, choose M here: the module will be called
 156           kingsun-sir.
 157
 158 config EP7211_DONGLE
 159         tristate "EP7211 I/R support"
 160         depends on IRTTY_SIR && ARCH_EP7211 && IRDA && EXPERIMENTAL
 161         help
 162           Say Y here if you want to build support for the Cirrus logic
 163           EP7211 chipset's infrared module.
 164
 165
 166
 167 comment "Old SIR device drivers"
 168
 169 config IRPORT_SIR
 170         tristate "IrPORT (IrDA serial driver)"
 171         depends on IRDA && BROKEN_ON_SMP
 172         ---help---
 173           Say Y here if you want to build support for the IrPORT IrDA device
 174           driver.  To compile it as a module, choose M here: the module will be
 175           called irport. IrPORT can be used instead of IrTTY and sometimes
 176           this can be better.  One example is if your IrDA port does not
 177           have echo-canceling, which will work OK with IrPORT since this
 178           driver is working in half-duplex mode only.  You don't need to use
 179           irattach with IrPORT, but you just insert it the same way as FIR
 180           drivers (insmod irport io=0x3e8 irq=11).  Notice that IrPORT is a
 181           SIR device driver which means that speed is limited to 115200 bps.
 182
 183           If unsure, say Y.
 184
 185 comment "Old Serial dongle support"
 186
 187 config DONGLE_OLD
 188         bool "Old Serial dongle support"
 189         depends on IRPORT_SIR && BROKEN_ON_SMP
 190         help
 191           Say Y here if you have an infrared device that connects to your
 192           computer's serial port. These devices are called dongles. Then say Y
 193           or M to the driver for your particular dongle below.
 194
 195           Note that the answer to this question won't directly affect the
 196           kernel: saying N will just cause the configurator to skip all
 197           the questions about serial dongles.
 198
 199 config ESI_DONGLE_OLD
 200         tristate "ESI JetEye PC dongle"
 201         depends on DONGLE_OLD && IRDA
 202         help
 203           Say Y here if you want to build support for the Extended Systems
 204           JetEye PC dongle.  To compile it as a module, choose M here.  The ESI
 205           dongle attaches to the normal 9-pin serial port connector, and can
 206           currently only be used by IrTTY.  To activate support for ESI
 207           dongles you will have to start irattach like this:
 208           "irattach -d esi".
 209
 210 config ACTISYS_DONGLE_OLD
 211         tristate "ACTiSYS IR-220L and IR220L+ dongle"
 212         depends on DONGLE_OLD && IRDA
 213         help
 214           Say Y here if you want to build support for the ACTiSYS IR-220L and
 215           IR220L+ dongles.  To compile it as a module, choose M here.  The
 216           ACTiSYS dongles attaches to the normal 9-pin serial port connector,
 217           and can currently only be used by IrTTY.  To activate support for
 218           ACTiSYS dongles you will have to start irattach like this:
 219           "irattach -d actisys" or "irattach -d actisys+".
 220
 221 config TEKRAM_DONGLE_OLD
 222         tristate "Tekram IrMate 210B dongle"
 223         depends on DONGLE_OLD && IRDA
 224         help
 225           Say Y here if you want to build support for the Tekram IrMate 210B
 226           dongle.  To compile it as a module, choose M here.  The Tekram dongle
 227           attaches to the normal 9-pin serial port connector, and can
 228           currently only be used by IrTTY.  To activate support for Tekram
 229           dongles you will have to start irattach like this:
 230           "irattach -d tekram".
 231
 232 config GIRBIL_DONGLE_OLD
 233         tristate "Greenwich GIrBIL dongle"
 234         depends on DONGLE_OLD && IRDA
 235         help
 236           Say Y here if you want to build support for the Greenwich GIrBIL
 237           dongle.  To compile it as a module, choose M here.  The Greenwich
 238           dongle attaches to the normal 9-pin serial port connector, and can
 239           currently only be used by IrTTY.  To activate support for Greenwich
 240           dongles you will have to insert "irattach -d girbil" in the
 241           /etc/irda/drivers script.
 242
 243 config LITELINK_DONGLE_OLD
 244         tristate "Parallax LiteLink dongle"
 245         depends on DONGLE_OLD && IRDA
 246         help
 247           Say Y here if you want to build support for the Parallax Litelink
 248           dongle.  To compile it as a module, choose M here.  The Parallax
 249           dongle attaches to the normal 9-pin serial port connector, and can
 250           currently only be used by IrTTY.  To activate support for Parallax
 251           dongles you will have to start irattach like this:
 252           "irattach -d litelink".
 253
 254 config MCP2120_DONGLE_OLD
 255         tristate "Microchip MCP2120"
 256         depends on DONGLE_OLD && IRDA
 257         help
 258           Say Y here if you want to build support for the Microchip MCP2120
 259           dongle.  To compile it as a module, choose M here.  The MCP2120 dongle
 260           attaches to the normal 9-pin serial port connector, and can
 261           currently only be used by IrTTY.  To activate support for MCP2120
 262           dongles you will have to insert "irattach -d mcp2120" in the
 263           /etc/irda/drivers script.
 264
 265           You must build this dongle yourself.  For more information see:
 266           <http://www.eyetap.org/~tangf/irda_sir_linux.html>
 267
 268 config OLD_BELKIN_DONGLE_OLD
 269         tristate "Old Belkin dongle"
 270         depends on DONGLE_OLD && IRDA
 271         help
 272           Say Y here if you want to build support for the Adaptec Airport 1000
 273           and 2000 dongles.  To compile it as a module, choose M here: the module
 274           will be called old_belkin.  Some information is contained in the
 275           comments at the top of <file:drivers/net/irda/old_belkin.c>.
 276
 277 config ACT200L_DONGLE_OLD
 278         tristate "ACTiSYS IR-200L dongle (EXPERIMENTAL)"
 279         depends on DONGLE_OLD && EXPERIMENTAL && IRDA
 280         help
 281           Say Y here if you want to build support for the ACTiSYS IR-200L
 282           dongle.  To compile it as a module, choose M here.  The ACTiSYS
 283           IR-200L dongle attaches to the normal 9-pin serial port connector,
 284           and can currently only be used by IrTTY. To activate support for
 285           ACTiSYS IR-200L dongles you will have to start irattach like this:
 286           "irattach -d act200l".
 287
 288 config MA600_DONGLE_OLD
 289         tristate "Mobile Action MA600 dongle (EXPERIMENTAL)"
 290         depends on DONGLE_OLD && EXPERIMENTAL && IRDA
 291         ---help---
 292           Say Y here if you want to build support for the Mobile Action MA600
 293           dongle.  To compile it as a module, choose M here. The MA600 dongle
 294           attaches to the normal 9-pin serial port connector, and can
 295           currently only be tested on IrCOMM.  To activate support for MA600
 296           dongles you will have to insert "irattach -d ma600" in the
 297           /etc/irda/drivers script.  Note: irutils 0.9.15 requires no
 298           modification. irutils 0.9.9 needs modification. For more
 299           information, download the following tar gzip file.
 300
 301           There is a pre-compiled module on
 302           <http://engsvr.ust.hk/~eetwl95/ma600.html>
 303
 304 config EP7211_IR
 305         tristate "EP7211 I/R support"
 306         depends on DONGLE_OLD && ARCH_EP7211 && IRDA
 307
 308 comment "FIR device drivers"
 309
 310 config USB_IRDA
 311         tristate "IrDA USB dongles"
 312         depends on IRDA && USB
 313         select FW_LOADER
 314         ---help---
 315           Say Y here if you want to build support for the USB IrDA FIR Dongle
 316           device driver.  To compile it as a module, choose M here: the module
 317           will be called irda-usb.  IrDA-USB support the various IrDA USB
 318           dongles available and most of their peculiarities.  Those dongles
 319           plug in the USB port of your computer, are plug and play, and
 320           support SIR and FIR (4Mbps) speeds.  On the other hand, those
 321           dongles tend to be less efficient than a FIR chipset.
 322
 323           Please note that the driver is still experimental.  And of course,
 324           you will need both USB and IrDA support in your kernel...
 325
 326 config SIGMATEL_FIR
 327         tristate "SigmaTel STIr4200 bridge (EXPERIMENTAL)"
 328         depends on IRDA && USB && EXPERIMENTAL
 329         select CRC32
 330         ---help---
 331           Say Y here if you want to build support for the SigmaTel STIr4200
 332           USB IrDA FIR bridge device driver.
 333
 334           USB bridge based on the SigmaTel STIr4200 don't conform to the
 335           IrDA-USB device class specification, and therefore need their
 336           own specific driver. Those dongles support SIR and FIR (4Mbps)
 337           speeds.
 338
 339           To compile it as a module, choose M here: the module will be called
 340           stir4200.
 341
 342 config NSC_FIR
 343         tristate "NSC PC87108/PC87338"
 344         depends on IRDA && ISA_DMA_API
 345         help
 346           Say Y here if you want to build support for the NSC PC87108 and
 347           PC87338 IrDA chipsets.  This driver supports SIR,
 348           MIR and FIR (4Mbps) speeds.
 349
 350           To compile it as a module, choose M here: the module will be called
 351           nsc-ircc.
 352
 353 config WINBOND_FIR
 354         tristate "Winbond W83977AF (IR)"
 355         depends on IRDA && ISA_DMA_API
 356         help
 357           Say Y here if you want to build IrDA support for the Winbond
 358           W83977AF super-io chipset.  This driver should be used for the IrDA
 359           chipset in the Corel NetWinder.  The driver supports SIR, MIR and
 360           FIR (4Mbps) speeds.
 361
 362           To compile it as a module, choose M here: the module will be called
 363           w83977af_ir.
 364
 365 config TOSHIBA_FIR
 366         tristate "Toshiba Type-O IR Port"
 367         depends on IRDA && PCI && !64BIT && VIRT_TO_BUS
 368         help
 369           Say Y here if you want to build support for the Toshiba Type-O IR
 370           and Donau oboe chipsets. These chipsets are used by the Toshiba
 371           Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
 372           To compile it as a module, choose M here: the module will be called
 373           donauboe.
 374
 375 config AU1000_FIR
 376         tristate "Alchemy Au1000 SIR/FIR"
 377         depends on SOC_AU1000 && IRDA
 378
 379 config SMC_IRCC_FIR
 380         tristate "SMSC IrCC (EXPERIMENTAL)"
 381         depends on EXPERIMENTAL && IRDA && ISA_DMA_API
 382         help
 383           Say Y here if you want to build support for the SMC Infrared
 384           Communications Controller.  It is used in a wide variety of
 385           laptops (Fujitsu, Sony, Compaq and some Toshiba).
 386           To compile it as a module, choose M here: the module will be called
 387           smsc-ircc2.o.
 388
 389 config ALI_FIR
 390         tristate "ALi M5123 FIR (EXPERIMENTAL)"
 391         depends on EXPERIMENTAL && IRDA && ISA_DMA_API
 392         help
 393           Say Y here if you want to build support for the ALi M5123 FIR
 394           Controller.  The ALi M5123 FIR Controller is embedded in ALi M1543C,
 395           M1535, M1535D, M1535+, M1535D South Bridge.  This driver supports
 396           SIR, MIR and FIR (4Mbps) speeds.
 397
 398           To compile it as a module, choose M here: the module will be called
 399           ali-ircc.
 400
 401 config VLSI_FIR
 402         tristate "VLSI 82C147 SIR/MIR/FIR (EXPERIMENTAL)"
 403         depends on EXPERIMENTAL && IRDA && PCI
 404         help
 405           Say Y here if you want to build support for the VLSI 82C147
 406           PCI-IrDA Controller. This controller is used by the HP OmniBook 800
 407           and 5500 notebooks. The driver provides support for SIR, MIR and
 408           FIR (4Mbps) speeds.
 409
 410           To compile it as a module, choose M here: the module will be called
 411           vlsi_ir.
 412
 413 config SA1100_FIR
 414         tristate "SA1100 Internal IR"
 415         depends on ARCH_SA1100 && IRDA
 416
 417 config VIA_FIR
 418         tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
 419         depends on IRDA && ISA_DMA_API
 420         help
 421           Say Y here if you want to build support for the VIA VT8231
 422           and VIA VT1211 IrDA controllers, found on the motherboards using
 423           those VIA chipsets. To use this controller, you will need
 424           to plug a specific 5 pins FIR IrDA dongle in the specific
 425           motherboard connector. The driver provides support for SIR, MIR
 426           and FIR (4Mbps) speeds.
 427
 428           You will need to specify the 'dongle_id' module parameter to
 429           indicate the FIR dongle attached to the controller.
 430
 431           To compile it as a module, choose M here: the module will be called
 432           via-ircc.
 433
 434 config PXA_FICP
 435         tristate "Intel PXA2xx Internal FICP"
 436         depends on ARCH_PXA && IRDA
 437         help
 438           Say Y or M here if you want to build support for the PXA2xx
 439           built-in IRDA interface which can support both SIR and FIR.
 440           This driver relies on platform specific helper routines so
 441           available capabilities may vary from one PXA2xx target to
 442           another.
 443
 444 config MCS_FIR
 445         tristate "MosChip MCS7780 IrDA-USB dongle"
 446         depends on IRDA && USB && EXPERIMENTAL
 447         help
 448           Say Y or M here if you want to build support for the MosChip
 449           MCS7780 IrDA-USB bridge device driver.
 450
 451           USB bridge based on the MosChip MCS7780 don't conform to the
 452           IrDA-USB device class specification, and therefore need their
 453           own specific driver. Those dongles support SIR and FIR (4Mbps)
 454           speeds.
 455
 456           To compile it as a module, choose M here: the module will be called
 457           mcs7780.
 458
 459 endmenu
 460