drivers/net/irda/Kconfig

   1
   2 menu "Infrared-port device drivers"
   3         depends on IRDA!=n
   4
   5 comment "SIR device drivers"
   6
   7 config IRTTY_SIR
   8         tristate "IrTTY (uses Linux serial driver)"
   9         depends on IRDA
  10         help
  11           Say Y here if you want to build support for the IrTTY line
  12           discipline.  To compile it as a module, choose M here: the module
  13           will be called irtty-sir. IrTTY makes it possible to use Linux's
  14           own serial driver for all IrDA ports that are 16550 compatible.
  15           Most IrDA chips are 16550 compatible so you should probably say Y
  16           to this option.  Using IrTTY will however limit the speed of the
  17           connection to 115200 bps (IrDA SIR mode).
  18
  19           If unsure, say Y.
  20
  21 comment "Dongle support"
  22
  23 config DONGLE
  24         bool "Serial dongle support"
  25         depends on IRTTY_SIR
  26         help
  27           Say Y here if you have an infrared device that connects to your
  28           computer's serial port. These devices are called dongles. Then say Y
  29           or M to the driver for your particular dongle below.
  30
  31           Note that the answer to this question won't directly affect the
  32           kernel: saying N will just cause the configurator to skip all
  33           the questions about serial dongles.
  34
  35 config ESI_DONGLE
  36         tristate "ESI JetEye PC dongle"
  37         depends on DONGLE && IRDA
  38         help
  39           Say Y here if you want to build support for the Extended Systems
  40           JetEye PC dongle.  To compile it as a module, choose M here. The ESI
  41           dongle attaches to the normal 9-pin serial port connector, and can
  42           currently only be used by IrTTY.  To activate support for ESI
  43           dongles you will have to start irattach like this:
  44           "irattach -d esi".
  45
  46 config ACTISYS_DONGLE
  47         tristate "ACTiSYS IR-220L and IR220L+ dongle"
  48         depends on DONGLE && IRDA
  49         help
  50           Say Y here if you want to build support for the ACTiSYS IR-220L and
  51           IR220L+ dongles.  To compile it as a module, choose M here. The
  52           ACTiSYS dongles attaches to the normal 9-pin serial port connector,
  53           and can currently only be used by IrTTY.  To activate support for
  54           ACTiSYS dongles you will have to start irattach like this:
  55           "irattach -d actisys" or "irattach -d actisys+".
  56
  57 config TEKRAM_DONGLE
  58         tristate "Tekram IrMate 210B dongle"
  59         depends on DONGLE && IRDA
  60         help
  61           Say Y here if you want to build support for the Tekram IrMate 210B
  62           dongle.  To compile it as a module, choose M here. The Tekram dongle
  63           attaches to the normal 9-pin serial port connector, and can
  64           currently only be used by IrTTY.  To activate support for Tekram
  65           dongles you will have to start irattach like this:
  66           "irattach -d tekram".
  67
  68 config LITELINK_DONGLE
  69         tristate "Parallax LiteLink dongle"
  70         depends on DONGLE && IRDA
  71         help
  72           Say Y here if you want to build support for the Parallax Litelink
  73           dongle.  To compile it as a module, choose M here.  The Parallax
  74           dongle attaches to the normal 9-pin serial port connector, and can
  75           currently only be used by IrTTY.  To activate support for Parallax
  76           dongles you will have to start irattach like this:
  77           "irattach -d litelink".
  78
  79 config MA600_DONGLE
  80         tristate "Mobile Action MA600 dongle"
  81         depends on DONGLE && IRDA && EXPERIMENTAL
  82         help
  83           Say Y here if you want to build support for the Mobile Action MA600
  84           dongle.  To compile it as a module, choose M here. The MA600 dongle
  85           attaches to the normal 9-pin serial port connector, and can
  86           currently only be used by IrTTY.  The driver should also support
  87           the MA620 USB version of the dongle, if the integrated USB-to-RS232
  88           converter is supported by usbserial. To activate support for
  89           MA600 dongle you will have to start irattach like this:
  90           "irattach -d ma600".
  91
  92 config GIRBIL_DONGLE
  93         tristate "Greenwich GIrBIL dongle"
  94         depends on DONGLE && IRDA && EXPERIMENTAL
  95         help
  96           Say Y here if you want to build support for the Greenwich GIrBIL
  97           dongle.  If you want to compile it as a module, choose M here.
  98           The Greenwich dongle attaches to the normal 9-pin serial port
  99           connector, and can currently only be used by IrTTY.  To activate
 100           support for Greenwich dongles you will have to start irattach
 101           like this: "irattach -d girbil".
 102
 103 config MCP2120_DONGLE
 104         tristate "Microchip MCP2120"
 105         depends on DONGLE && IRDA && EXPERIMENTAL
 106         help
 107           Say Y here if you want to build support for the Microchip MCP2120
 108           dongle.  If you want to compile it as a module, choose M here.
 109           The MCP2120 dongle attaches to the normal 9-pin serial port
 110           connector, and can currently only be used by IrTTY.  To activate
 111           support for MCP2120 dongles you will have to start irattach
 112           like this: "irattach -d mcp2120".
 113
 114           You must build this dongle yourself.  For more information see:
 115           <http://www.eyetap.org/~tangf/irda_sir_linux.html>
 116
 117 config OLD_BELKIN_DONGLE
 118         tristate "Old Belkin dongle"
 119         depends on DONGLE && IRDA && EXPERIMENTAL
 120         help
 121           Say Y here if you want to build support for the Adaptec Airport 1000
 122           and 2000 dongles.  If you want to compile it as a module, choose
 123           M here. Some information is contained in the comments
 124           at the top of <file:drivers/net/irda/old_belkin.c>.
 125
 126 config ACT200L_DONGLE
 127         tristate "ACTiSYS IR-200L dongle"
 128         depends on DONGLE && IRDA && EXPERIMENTAL
 129         help
 130           Say Y here if you want to build support for the ACTiSYS IR-200L
 131           dongle. If you want to compile it as a module, choose M here.
 132           The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
 133           port connector, and can currently only be used by IrTTY.
 134           To activate support for ACTiSYS IR-200L dongle you will have to
 135           start irattach like this: "irattach -d act200l".
 136
 137 comment "Old SIR device drivers"
 138
 139 config IRPORT_SIR
 140         tristate "IrPORT (IrDA serial driver)"
 141         depends on IRDA && BROKEN_ON_SMP
 142         ---help---
 143           Say Y here if you want to build support for the IrPORT IrDA device
 144           driver.  To compile it as a module, choose M here: the module will be
 145           called irport. IrPORT can be used instead of IrTTY and sometimes
 146           this can be better.  One example is if your IrDA port does not
 147           have echo-canceling, which will work OK with IrPORT since this
 148           driver is working in half-duplex mode only.  You don't need to use
 149           irattach with IrPORT, but you just insert it the same way as FIR
 150           drivers (insmod irport io=0x3e8 irq=11).  Notice that IrPORT is a
 151           SIR device driver which means that speed is limited to 115200 bps.
 152
 153           If unsure, say Y.
 154
 155 comment "Old Serial dongle support"
 156
 157 config DONGLE_OLD
 158         bool "Old Serial dongle support"
 159         depends on (IRTTY_OLD || IRPORT_SIR) && BROKEN_ON_SMP
 160         help
 161           Say Y here if you have an infrared device that connects to your
 162           computer's serial port. These devices are called dongles. Then say Y
 163           or M to the driver for your particular dongle below.
 164
 165           Note that the answer to this question won't directly affect the
 166           kernel: saying N will just cause the configurator to skip all
 167           the questions about serial dongles.
 168
 169 config ESI_DONGLE_OLD
 170         tristate "ESI JetEye PC dongle"
 171         depends on DONGLE_OLD && IRDA
 172         help
 173           Say Y here if you want to build support for the Extended Systems
 174           JetEye PC dongle.  To compile it as a module, choose M here.  The ESI
 175           dongle attaches to the normal 9-pin serial port connector, and can
 176           currently only be used by IrTTY.  To activate support for ESI
 177           dongles you will have to start irattach like this:
 178           "irattach -d esi".
 179
 180 config ACTISYS_DONGLE_OLD
 181         tristate "ACTiSYS IR-220L and IR220L+ dongle"
 182         depends on DONGLE_OLD && IRDA
 183         help
 184           Say Y here if you want to build support for the ACTiSYS IR-220L and
 185           IR220L+ dongles.  To compile it as a module, choose M here.  The
 186           ACTiSYS dongles attaches to the normal 9-pin serial port connector,
 187           and can currently only be used by IrTTY.  To activate support for
 188           ACTiSYS dongles you will have to start irattach like this:
 189           "irattach -d actisys" or "irattach -d actisys+".
 190
 191 config TEKRAM_DONGLE_OLD
 192         tristate "Tekram IrMate 210B dongle"
 193         depends on DONGLE_OLD && IRDA
 194         help
 195           Say Y here if you want to build support for the Tekram IrMate 210B
 196           dongle.  To compile it as a module, choose M here.  The Tekram dongle
 197           attaches to the normal 9-pin serial port connector, and can
 198           currently only be used by IrTTY.  To activate support for Tekram
 199           dongles you will have to start irattach like this:
 200           "irattach -d tekram".
 201
 202 config GIRBIL_DONGLE_OLD
 203         tristate "Greenwich GIrBIL dongle"
 204         depends on DONGLE_OLD && IRDA
 205         help
 206           Say Y here if you want to build support for the Greenwich GIrBIL
 207           dongle.  To compile it as a module, choose M here.  The Greenwich
 208           dongle attaches to the normal 9-pin serial port connector, and can
 209           currently only be used by IrTTY.  To activate support for Greenwich
 210           dongles you will have to insert "irattach -d girbil" in the
 211           /etc/irda/drivers script.
 212
 213 config LITELINK_DONGLE_OLD
 214         tristate "Parallax LiteLink dongle"
 215         depends on DONGLE_OLD && IRDA
 216         help
 217           Say Y here if you want to build support for the Parallax Litelink
 218           dongle.  To compile it as a module, choose M here.  The Parallax
 219           dongle attaches to the normal 9-pin serial port connector, and can
 220           currently only be used by IrTTY.  To activate support for Parallax
 221           dongles you will have to start irattach like this:
 222           "irattach -d litelink".
 223
 224 config MCP2120_DONGLE_OLD
 225         tristate "Microchip MCP2120"
 226         depends on DONGLE_OLD && IRDA
 227         help
 228           Say Y here if you want to build support for the Microchip MCP2120
 229           dongle.  To compile it as a module, choose M here.  The MCP2120 dongle
 230           attaches to the normal 9-pin serial port connector, and can
 231           currently only be used by IrTTY.  To activate support for MCP2120
 232           dongles you will have to insert "irattach -d mcp2120" in the
 233           /etc/irda/drivers script.
 234
 235           You must build this dongle yourself.  For more information see:
 236           <http://www.eyetap.org/~tangf/irda_sir_linux.html>
 237
 238 config OLD_BELKIN_DONGLE_OLD
 239         tristate "Old Belkin dongle"
 240         depends on DONGLE_OLD && IRDA
 241         help
 242           Say Y here if you want to build support for the Adaptec Airport 1000
 243           and 2000 dongles.  To compile it as a module, choose M here: the module
 244           will be called old_belkin.  Some information is contained in the
 245           comments at the top of <file:drivers/net/irda/old_belkin.c>.
 246
 247 config ACT200L_DONGLE_OLD
 248         tristate "ACTiSYS IR-200L dongle (EXPERIMENTAL)"
 249         depends on DONGLE_OLD && EXPERIMENTAL && IRDA
 250         help
 251           Say Y here if you want to build support for the ACTiSYS IR-200L
 252           dongle.  To compile it as a module, choose M here.  The ACTiSYS
 253           IR-200L dongle attaches to the normal 9-pin serial port connector,
 254           and can currently only be used by IrTTY. To activate support for
 255           ACTiSYS IR-200L dongles you will have to start irattach like this:
 256           "irattach -d act200l".
 257
 258 config MA600_DONGLE_OLD
 259         tristate "Mobile Action MA600 dongle (EXPERIMENTAL)"
 260         depends on DONGLE_OLD && EXPERIMENTAL && IRDA
 261         ---help---
 262           Say Y here if you want to build support for the Mobile Action MA600
 263           dongle.  To compile it as a module, choose M here. The MA600 dongle
 264           attaches to the normal 9-pin serial port connector, and can
 265           currently only be tested on IrCOMM.  To activate support for MA600
 266           dongles you will have to insert "irattach -d ma600" in the
 267           /etc/irda/drivers script.  Note: irutils 0.9.15 requires no
 268           modification. irutils 0.9.9 needs modification. For more
 269           information, download the following tar gzip file.
 270
 271           There is a pre-compiled module on
 272           <http://engsvr.ust.hk/~eetwl95/ma600.html>
 273
 274 config EP7211_IR
 275         tristate "EP7211 I/R support"
 276         depends on DONGLE_OLD && ARCH_EP7211 && IRDA
 277
 278 comment "FIR device drivers"
 279
 280 config USB_IRDA
 281         tristate "IrDA USB dongles"
 282         depends on IRDA && USB
 283         ---help---
 284           Say Y here if you want to build support for the USB IrDA FIR Dongle
 285           device driver.  To compile it as a module, choose M here: the module
 286           will be called irda-usb.  IrDA-USB support the various IrDA USB
 287           dongles available and most of their pecularities.  Those dongles
 288           plug in the USB port of your computer, are plug and play, and
 289           support SIR and FIR (4Mbps) speeds.  On the other hand, those
 290           dongles tend to be less efficient than a FIR chipset.
 291
 292           Please note that the driver is still experimental.  And of course,
 293           you will need both USB and IrDA support in your kernel...
 294
 295 config SIGMATEL_FIR
 296         tristate "SigmaTel STIr4200 bridge (EXPERIMENTAL)"
 297         depends on IRDA && USB && EXPERIMENTAL
 298         select CRC32
 299         ---help---
 300           Say Y here if you want to build support for the SigmaTel STIr4200
 301           USB IrDA FIR bridge device driver.
 302
 303           USB bridge based on the SigmaTel STIr4200 don't conform to the
 304           IrDA-USB device class specification, and therefore need their
 305           own specific driver. Those dongles support SIR and FIR (4Mbps)
 306           speeds.
 307
 308           To compile it as a module, choose M here: the module will be called
 309           stir4200.
 310
 311 config NSC_FIR
 312         tristate "NSC PC87108/PC87338"
 313         depends on IRDA && ISA
 314         help
 315           Say Y here if you want to build support for the NSC PC87108 and
 316           PC87338 IrDA chipsets.  This driver supports SIR,
 317           MIR and FIR (4Mbps) speeds.
 318
 319           To compile it as a module, choose M here: the module will be called
 320           nsc-ircc.
 321
 322 config WINBOND_FIR
 323         tristate "Winbond W83977AF (IR)"
 324         depends on IRDA && ISA
 325         help
 326           Say Y here if you want to build IrDA support for the Winbond
 327           W83977AF super-io chipset.  This driver should be used for the IrDA
 328           chipset in the Corel NetWinder.  The driver supports SIR, MIR and
 329           FIR (4Mbps) speeds.
 330
 331           To compile it as a module, choose M here: the module will be called
 332           w83977af_ir.
 333
 334 config TOSHIBA_FIR
 335         tristate "Toshiba Type-O IR Port"
 336         depends on IRDA && PCI && !64BIT
 337         help
 338           Say Y here if you want to build support for the Toshiba Type-O IR
 339           and Donau oboe chipsets. These chipsets are used by the Toshiba
 340           Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
 341           To compile it as a module, choose M here: the module will be called
 342           donauboe.
 343
 344 config AU1000_FIR
 345         tristate "Alchemy Au1000 SIR/FIR"
 346         depends on MIPS_AU1000 && IRDA
 347
 348 config SMC_IRCC_FIR
 349         tristate "SMSC IrCC (EXPERIMENTAL)"
 350         depends on EXPERIMENTAL && IRDA && ISA
 351         help
 352           Say Y here if you want to build support for the SMC Infrared
 353           Communications Controller.  It is used in a wide variety of
 354           laptops (Fujitsu, Sony, Compaq and some Toshiba).
 355           To compile it as a module, choose M here: the module will be called
 356           smsc-ircc2.o.
 357
 358 config ALI_FIR
 359         tristate "ALi M5123 FIR (EXPERIMENTAL)"
 360         depends on EXPERIMENTAL && IRDA && ISA
 361         help
 362           Say Y here if you want to build support for the ALi M5123 FIR
 363           Controller.  The ALi M5123 FIR Controller is embedded in ALi M1543C,
 364           M1535, M1535D, M1535+, M1535D Sourth Bridge.  This driver supports
 365           SIR, MIR and FIR (4Mbps) speeds.
 366
 367           To compile it as a module, choose M here: the module will be called
 368           ali-ircc.
 369
 370 config VLSI_FIR
 371         tristate "VLSI 82C147 SIR/MIR/FIR (EXPERIMENTAL)"
 372         depends on EXPERIMENTAL && IRDA && PCI
 373         help
 374           Say Y here if you want to build support for the VLSI 82C147
 375           PCI-IrDA Controller. This controller is used by the HP OmniBook 800
 376           and 5500 notebooks. The driver provides support for SIR, MIR and
 377           FIR (4Mbps) speeds.
 378
 379           To compile it as a module, choose M here: the module will be called
 380           vlsi_ir.
 381
 382 config SA1100_FIR
 383         tristate "SA1100 Internal IR"
 384         depends on ARCH_SA1100 && IRDA
 385
 386 config VIA_FIR
 387         tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
 388         depends on IRDA && ISA && PCI
 389         help
 390           Say Y here if you want to build support for the VIA VT8231
 391           and VIA VT1211 IrDA controllers, found on the motherboards using
 392           those those VIA chipsets. To use this controller, you will need
 393           to plug a specific 5 pins FIR IrDA dongle in the specific
 394           motherboard connector. The driver provides support for SIR, MIR
 395           and FIR (4Mbps) speeds.
 396
 397           You will need to specify the 'dongle_id' module parameter to
 398           indicate the FIR dongle attached to the controller.
 399
 400           To compile it as a module, choose M here: the module will be called
 401           via-ircc.
 402
 403 endmenu
 404