drivers/net/irda/Kconfig

   1 menu "Infrared-port device drivers"
   2         depends on IRDA!=n
   3
   4 comment "SIR device drivers"
   5
   6 config IRTTY_SIR
   7         tristate "IrTTY (uses Linux serial driver)"
   8         depends on IRDA
   9         help
  10           Say Y here if you want to build support for the IrTTY line
  11           discipline.  To compile it as a module, choose M here: the module
  12           will be called irtty-sir. IrTTY makes it possible to use Linux's
  13           own serial driver for all IrDA ports that are 16550 compatible.
  14           Most IrDA chips are 16550 compatible so you should probably say Y
  15           to this option.  Using IrTTY will however limit the speed of the
  16           connection to 115200 bps (IrDA SIR mode).
  17
  18           If unsure, say Y.
  19
  20 config BFIN_SIR
  21         tristate "Blackfin SIR on UART"
  22         depends on BLACKFIN && IRDA
  23         default n
  24         help
  25           Say Y here if your want to enable SIR function on Blackfin UART
  26           devices.
  27
  28           To activate this driver you can start irattach like:
  29           "irattach irda0 -s"
  30
  31           Saying M, it will be built as a module named bfin_sir.
  32
  33           Note that you need to turn off one of the serial drivers for SIR
  34           to use that UART.
  35
  36 config BFIN_SIR0
  37         bool "Blackfin SIR on UART0"
  38         depends on BFIN_SIR && !SERIAL_BFIN_UART0
  39
  40 config BFIN_SIR1
  41         bool "Blackfin SIR on UART1"
  42         depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561)
  43
  44 config BFIN_SIR2
  45         bool "Blackfin SIR on UART2"
  46         depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539)
  47
  48 config BFIN_SIR3
  49         bool "Blackfin SIR on UART3"
  50         depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x)
  51
  52 choice
  53         prompt "SIR Mode"
  54         depends on BFIN_SIR
  55         default SIR_BFIN_DMA
  56
  57 config SIR_BFIN_DMA
  58         bool "DMA mode"
  59         depends on !DMA_UNCACHED_NONE
  60
  61 config SIR_BFIN_PIO
  62         bool "PIO mode"
  63 endchoice
  64
  65 comment "Dongle support"
  66
  67 config SH_SIR
  68         tristate "SuperH SIR on UART"
  69         depends on IRDA && SUPERH && \
  70                 (CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7723 || \
  71                  CPU_SUBTYPE_SH7724)
  72         default n
  73         help
  74           Say Y here if your want to enable SIR function on SuperH UART
  75           devices.
  76
  77 config DONGLE
  78         bool "Serial dongle support"
  79         depends on IRTTY_SIR
  80         help
  81           Say Y here if you have an infrared device that connects to your
  82           computer's serial port. These devices are called dongles. Then say Y
  83           or M to the driver for your particular dongle below.
  84
  85           Note that the answer to this question won't directly affect the
  86           kernel: saying N will just cause the configurator to skip all
  87           the questions about serial dongles.
  88
  89 config ESI_DONGLE
  90         tristate "ESI JetEye PC dongle"
  91         depends on IRTTY_SIR && DONGLE && IRDA
  92         help
  93           Say Y here if you want to build support for the Extended Systems
  94           JetEye PC dongle.  To compile it as a module, choose M here. The ESI
  95           dongle attaches to the normal 9-pin serial port connector, and can
  96           currently only be used by IrTTY.  To activate support for ESI
  97           dongles you will have to start irattach like this:
  98           "irattach -d esi".
  99
 100 config ACTISYS_DONGLE
 101         tristate "ACTiSYS IR-220L and IR220L+ dongle"
 102         depends on IRTTY_SIR && DONGLE && IRDA
 103         help
 104           Say Y here if you want to build support for the ACTiSYS IR-220L and
 105           IR220L+ dongles.  To compile it as a module, choose M here. The
 106           ACTiSYS dongles attaches to the normal 9-pin serial port connector,
 107           and can currently only be used by IrTTY.  To activate support for
 108           ACTiSYS dongles you will have to start irattach like this:
 109           "irattach -d actisys" or "irattach -d actisys+".
 110
 111 config TEKRAM_DONGLE
 112         tristate "Tekram IrMate 210B dongle"
 113         depends on IRTTY_SIR && DONGLE && IRDA
 114         help
 115           Say Y here if you want to build support for the Tekram IrMate 210B
 116           dongle.  To compile it as a module, choose M here. The Tekram dongle
 117           attaches to the normal 9-pin serial port connector, and can
 118           currently only be used by IrTTY.  To activate support for Tekram
 119           dongles you will have to start irattach like this:
 120           "irattach -d tekram".
 121
 122 config TOIM3232_DONGLE
 123         tristate "TOIM3232 IrDa dongle"
 124         depends on IRTTY_SIR && DONGLE && IRDA
 125         help
 126           Say Y here if you want to build support for the Vishay/Temic
 127           TOIM3232 and TOIM4232 based dongles.
 128           To compile it as a module, choose M here.
 129
 130 config LITELINK_DONGLE
 131         tristate "Parallax LiteLink dongle"
 132         depends on IRTTY_SIR && DONGLE && IRDA
 133         help
 134           Say Y here if you want to build support for the Parallax Litelink
 135           dongle.  To compile it as a module, choose M here.  The Parallax
 136           dongle attaches to the normal 9-pin serial port connector, and can
 137           currently only be used by IrTTY.  To activate support for Parallax
 138           dongles you will have to start irattach like this:
 139           "irattach -d litelink".
 140
 141 config MA600_DONGLE
 142         tristate "Mobile Action MA600 dongle"
 143         depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 144         help
 145           Say Y here if you want to build support for the Mobile Action MA600
 146           dongle.  To compile it as a module, choose M here. The MA600 dongle
 147           attaches to the normal 9-pin serial port connector, and can
 148           currently only be used by IrTTY.  The driver should also support
 149           the MA620 USB version of the dongle, if the integrated USB-to-RS232
 150           converter is supported by usbserial. To activate support for
 151           MA600 dongle you will have to start irattach like this:
 152           "irattach -d ma600".
 153
 154 config GIRBIL_DONGLE
 155         tristate "Greenwich GIrBIL dongle"
 156         depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 157         help
 158           Say Y here if you want to build support for the Greenwich GIrBIL
 159           dongle.  If you want to compile it as a module, choose M here.
 160           The Greenwich dongle attaches to the normal 9-pin serial port
 161           connector, and can currently only be used by IrTTY.  To activate
 162           support for Greenwich dongles you will have to start irattach
 163           like this: "irattach -d girbil".
 164
 165 config MCP2120_DONGLE
 166         tristate "Microchip MCP2120"
 167         depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 168         help
 169           Say Y here if you want to build support for the Microchip MCP2120
 170           dongle.  If you want to compile it as a module, choose M here.
 171           The MCP2120 dongle attaches to the normal 9-pin serial port
 172           connector, and can currently only be used by IrTTY.  To activate
 173           support for MCP2120 dongles you will have to start irattach
 174           like this: "irattach -d mcp2120".
 175
 176           You must build this dongle yourself.  For more information see:
 177           <http://www.eyetap.org/~tangf/irda_sir_linux.html>
 178
 179 config OLD_BELKIN_DONGLE
 180         tristate "Old Belkin dongle"
 181         depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 182         help
 183           Say Y here if you want to build support for the Adaptec Airport 1000
 184           and 2000 dongles.  If you want to compile it as a module, choose
 185           M here. Some information is contained in the comments
 186           at the top of <file:drivers/net/irda/old_belkin-sir.c>.
 187
 188 config ACT200L_DONGLE
 189         tristate "ACTiSYS IR-200L dongle"
 190         depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 191         help
 192           Say Y here if you want to build support for the ACTiSYS IR-200L
 193           dongle. If you want to compile it as a module, choose M here.
 194           The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
 195           port connector, and can currently only be used by IrTTY.
 196           To activate support for ACTiSYS IR-200L dongle you will have to
 197           start irattach like this: "irattach -d act200l".
 198
 199 config KINGSUN_DONGLE
 200         tristate "KingSun/DonShine DS-620 IrDA-USB dongle"
 201         depends on IRDA && USB && EXPERIMENTAL
 202         help
 203           Say Y or M here if you want to build support for the KingSun/DonShine
 204           DS-620 IrDA-USB bridge device driver.
 205
 206           This USB bridge does not conform to the IrDA-USB device class
 207           specification, and therefore needs its own specific driver. This
 208           dongle supports SIR speed only (9600 bps).
 209
 210           To compile it as a module, choose M here: the module will be called
 211           kingsun-sir.
 212
 213 config EP7211_DONGLE
 214         tristate "EP7211 I/R support"
 215         depends on IRTTY_SIR && ARCH_EP7211 && IRDA && EXPERIMENTAL
 216         help
 217           Say Y here if you want to build support for the Cirrus logic
 218           EP7211 chipset's infrared module.
 219
 220 config KSDAZZLE_DONGLE
 221         tristate "KingSun Dazzle IrDA-USB dongle (EXPERIMENTAL)"
 222         depends on IRDA && USB && EXPERIMENTAL
 223         help
 224           Say Y or M here if you want to build support for the KingSun Dazzle
 225           IrDA-USB bridge device driver.
 226
 227           This USB bridge does not conform to the IrDA-USB device class
 228           specification, and therefore needs its own specific driver. This
 229           dongle supports SIR speeds only (9600 through 115200 bps).
 230
 231           To compile it as a module, choose M here: the module will be called
 232           ksdazzle-sir.
 233
 234 config KS959_DONGLE
 235         tristate "KingSun KS-959 IrDA-USB dongle (EXPERIMENTAL)"
 236         depends on IRDA && USB && EXPERIMENTAL
 237         help
 238           Say Y or M here if you want to build support for the KingSun KS-959
 239           IrDA-USB bridge device driver.
 240
 241           This USB bridge does not conform to the IrDA-USB device class
 242           specification, and therefore needs its own specific driver. This
 243           dongle supports SIR speeds only (9600 through 57600 bps).
 244
 245           To compile it as a module, choose M here: the module will be called
 246           ks959-sir.
 247
 248 comment "FIR device drivers"
 249
 250 config USB_IRDA
 251         tristate "IrDA USB dongles"
 252         depends on IRDA && USB
 253         select FW_LOADER
 254         ---help---
 255           Say Y here if you want to build support for the USB IrDA FIR Dongle
 256           device driver.  To compile it as a module, choose M here: the module
 257           will be called irda-usb.  IrDA-USB support the various IrDA USB
 258           dongles available and most of their peculiarities.  Those dongles
 259           plug in the USB port of your computer, are plug and play, and
 260           support SIR and FIR (4Mbps) speeds.  On the other hand, those
 261           dongles tend to be less efficient than a FIR chipset.
 262
 263           Please note that the driver is still experimental.  And of course,
 264           you will need both USB and IrDA support in your kernel...
 265
 266 config SIGMATEL_FIR
 267         tristate "SigmaTel STIr4200 bridge (EXPERIMENTAL)"
 268         depends on IRDA && USB && EXPERIMENTAL
 269         select CRC32
 270         ---help---
 271           Say Y here if you want to build support for the SigmaTel STIr4200
 272           USB IrDA FIR bridge device driver.
 273
 274           USB bridge based on the SigmaTel STIr4200 don't conform to the
 275           IrDA-USB device class specification, and therefore need their
 276           own specific driver. Those dongles support SIR and FIR (4Mbps)
 277           speeds.
 278
 279           To compile it as a module, choose M here: the module will be called
 280           stir4200.
 281
 282 config NSC_FIR
 283         tristate "NSC PC87108/PC87338"
 284         depends on IRDA && ISA_DMA_API
 285         help
 286           Say Y here if you want to build support for the NSC PC87108 and
 287           PC87338 IrDA chipsets.  This driver supports SIR,
 288           MIR and FIR (4Mbps) speeds.
 289
 290           To compile it as a module, choose M here: the module will be called
 291           nsc-ircc.
 292
 293 config WINBOND_FIR
 294         tristate "Winbond W83977AF (IR)"
 295         depends on IRDA && ISA_DMA_API
 296         help
 297           Say Y here if you want to build IrDA support for the Winbond
 298           W83977AF super-io chipset.  This driver should be used for the IrDA
 299           chipset in the Corel NetWinder.  The driver supports SIR, MIR and
 300           FIR (4Mbps) speeds.
 301
 302           To compile it as a module, choose M here: the module will be called
 303           w83977af_ir.
 304
 305 config TOSHIBA_FIR
 306         tristate "Toshiba Type-O IR Port"
 307         depends on IRDA && PCI && !64BIT && VIRT_TO_BUS
 308         help
 309           Say Y here if you want to build support for the Toshiba Type-O IR
 310           and Donau oboe chipsets. These chipsets are used by the Toshiba
 311           Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
 312           To compile it as a module, choose M here: the module will be called
 313           donauboe.
 314
 315 config AU1000_FIR
 316         tristate "Alchemy Au1000 SIR/FIR"
 317         depends on IRDA && MIPS_ALCHEMY
 318
 319 config SMC_IRCC_FIR
 320         tristate "SMSC IrCC (EXPERIMENTAL)"
 321         depends on EXPERIMENTAL && IRDA && ISA_DMA_API
 322         help
 323           Say Y here if you want to build support for the SMC Infrared
 324           Communications Controller.  It is used in a wide variety of
 325           laptops (Fujitsu, Sony, Compaq and some Toshiba).
 326           To compile it as a module, choose M here: the module will be called
 327           smsc-ircc2.o.
 328
 329 config ALI_FIR
 330         tristate "ALi M5123 FIR (EXPERIMENTAL)"
 331         depends on EXPERIMENTAL && IRDA && ISA_DMA_API
 332         help
 333           Say Y here if you want to build support for the ALi M5123 FIR
 334           Controller.  The ALi M5123 FIR Controller is embedded in ALi M1543C,
 335           M1535, M1535D, M1535+, M1535D South Bridge.  This driver supports
 336           SIR, MIR and FIR (4Mbps) speeds.
 337
 338           To compile it as a module, choose M here: the module will be called
 339           ali-ircc.
 340
 341 config VLSI_FIR
 342         tristate "VLSI 82C147 SIR/MIR/FIR (EXPERIMENTAL)"
 343         depends on EXPERIMENTAL && IRDA && PCI
 344         help
 345           Say Y here if you want to build support for the VLSI 82C147
 346           PCI-IrDA Controller. This controller is used by the HP OmniBook 800
 347           and 5500 notebooks. The driver provides support for SIR, MIR and
 348           FIR (4Mbps) speeds.
 349
 350           To compile it as a module, choose M here: the module will be called
 351           vlsi_ir.
 352
 353 config SA1100_FIR
 354         tristate "SA1100 Internal IR"
 355         depends on ARCH_SA1100 && IRDA
 356
 357 config VIA_FIR
 358         tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
 359         depends on IRDA && ISA_DMA_API
 360         help
 361           Say Y here if you want to build support for the VIA VT8231
 362           and VIA VT1211 IrDA controllers, found on the motherboards using
 363           those VIA chipsets. To use this controller, you will need
 364           to plug a specific 5 pins FIR IrDA dongle in the specific
 365           motherboard connector. The driver provides support for SIR, MIR
 366           and FIR (4Mbps) speeds.
 367
 368           You will need to specify the 'dongle_id' module parameter to
 369           indicate the FIR dongle attached to the controller.
 370
 371           To compile it as a module, choose M here: the module will be called
 372           via-ircc.
 373
 374 config PXA_FICP
 375         tristate "Intel PXA2xx Internal FICP"
 376         depends on ARCH_PXA && IRDA
 377         help
 378           Say Y or M here if you want to build support for the PXA2xx
 379           built-in IRDA interface which can support both SIR and FIR.
 380           This driver relies on platform specific helper routines so
 381           available capabilities may vary from one PXA2xx target to
 382           another.
 383
 384 config MCS_FIR
 385         tristate "MosChip MCS7780 IrDA-USB dongle"
 386         depends on IRDA && USB && EXPERIMENTAL
 387         select CRC32
 388         help
 389           Say Y or M here if you want to build support for the MosChip
 390           MCS7780 IrDA-USB bridge device driver.
 391
 392           USB bridge based on the MosChip MCS7780 don't conform to the
 393           IrDA-USB device class specification, and therefore need their
 394           own specific driver. Those dongles support SIR and FIR (4Mbps)
 395           speeds.
 396
 397           To compile it as a module, choose M here: the module will be called
 398           mcs7780.
 399
 400 config SH_IRDA
 401         tristate "SuperH IrDA driver"
 402         depends on IRDA && ARCH_SHMOBILE
 403         help
 404           Say Y here if your want to enable SuperH IrDA devices.
 405
 406 endmenu
 407