]>
git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - drivers/net/meth.h
3 * snull.h -- definitions for the network module
5 * Copyright (C) 2001 Alessandro Rubini and Jonathan Corbet
6 * Copyright (C) 2001 O'Reilly & Associates
8 * The source code in this file can be freely used, adapted,
9 * and redistributed in source or binary form, so long as an
10 * acknowledgment appears in derived source files. The citation
11 * should list that the code comes from the book "Linux Device
12 * Drivers" by Alessandro Rubini and Jonathan Corbet, published
13 * by O'Reilly & Associates. No warranty is attached;
14 * we cannot take responsibility for errors or fitness for use.
17 /* version dependencies have been confined to a separate file */
19 /* Tunable parameters */
20 #define TX_RING_ENTRIES 64 /* 64-512?*/
22 #define RX_RING_ENTRIES 16 /* Do not change */
23 /* Internal constants */
24 #define TX_RING_BUFFER_SIZE (TX_RING_ENTRIES*sizeof(tx_packet))
25 #define RX_BUFFER_SIZE 1546 /* ethenet packet size */
26 #define METH_RX_BUFF_SIZE 4096
27 #define METH_RX_HEAD 34 /* status + 3 quad garbage-fill + 2 byte zero-pad */
28 #define RX_BUFFER_OFFSET (sizeof(rx_status_vector)+2) /* staus vector + 2 bytes of padding */
29 #define RX_BUCKET_SIZE 256
31 /* For more detailed explanations of what each field menas,
32 see Nick's great comments to #defines below (or docs, if
33 you are lucky enough toget hold of them :)*/
35 /* tx status vector is written over tx command header upon
38 typedef struct tx_status_vector
{
39 u64 sent
:1; /* always set to 1...*/
40 u64 pad0
:34;/* always set to 0 */
41 u64 flags
:9; /*I'm too lazy to specify each one separately at the moment*/
42 u64 col_retry_cnt
:4; /*collision retry count*/
43 u64 len
:16; /*Transmit length in bytes*/
47 * Each packet is 128 bytes long.
48 * It consists of header, 0-3 concatination
49 * buffer pointers and up to 120 data bytes.
51 typedef struct tx_packet_hdr
{
52 u64 pad1
:36; /*should be filled with 0 */
53 u64 cat_ptr3_valid
:1, /*Concatination pointer valid flags*/
56 u64 tx_int_flag
:1; /*Generate TX intrrupt when packet has been sent*/
57 u64 term_dma_flag
:1; /*Terminate transmit DMA on transmit abort conditions*/
58 u64 data_offset
:7; /*Starting byte offset in ring data block*/
59 u64 data_len
:16; /*Length of valid data in bytes-1*/
61 typedef union tx_cat_ptr
{
63 u64 pad2
:16; /* should be 0 */
64 u64 len
:16; /*length of buffer data - 1*/
65 u64 start_addr
:29; /*Physical starting address*/
66 u64 pad1
:3; /* should be zero */
71 typedef struct tx_packet
{
78 tx_cat_ptr cat_buf
[3];
83 typedef union rx_status_vector
{
85 u64 pad1
:1;/*fill it with ones*/
86 u64 pad2
:15;/*fill with 0*/
90 u64 mcast_addr_match
:1;
91 u64 carrier_event_seen
:1;
93 u64 long_event_seen
:1;
94 u64 invalid_preamble
:1;
99 u64 rx_code_violation
:1;
105 typedef struct rx_packet
{
106 rx_status_vector status
;
107 u64 pad
[3]; /* For whatever reason, there needs to be 4 double-word offset */
109 char buf
[METH_RX_BUFF_SIZE
-sizeof(rx_status_vector
)-3*sizeof(u64
)-sizeof(u16
)];/* data */
112 #define TX_INFO_RPTR 0x00FF0000
113 #define TX_INFO_WPTR 0x000000FF
115 /* Bits in METH_MAC */
117 #define SGI_MAC_RESET BIT(0) /* 0: MAC110 active in run mode, 1: Global reset signal to MAC110 core is active */
118 #define METH_PHY_FDX BIT(1) /* 0: Disable full duplex, 1: Enable full duplex */
119 #define METH_PHY_LOOP BIT(2) /* 0: Normal operation, follows 10/100mbit and M10T/MII select, 1: loops internal MII bus */
120 /* selects ignored */
121 #define METH_100MBIT BIT(3) /* 0: 10meg mode, 1: 100meg mode */
122 #define METH_PHY_MII BIT(4) /* 0: MII selected, 1: SIA selected */
123 /* Note: when loopback is set this bit becomes collision control. Setting this bit will */
124 /* cause a collision to be reported. */
126 /* Bits 5 and 6 are used to determine the Destination address filter mode */
127 #define METH_ACCEPT_MY 0 /* 00: Accept PHY address only */
128 #define METH_ACCEPT_MCAST 0x20 /* 01: Accept physical, broadcast, and multicast filter matches only */
129 #define METH_ACCEPT_AMCAST 0x40 /* 10: Accept physical, broadcast, and all multicast packets */
130 #define METH_PROMISC 0x60 /* 11: Promiscious mode */
132 #define METH_PHY_LINK_FAIL BIT(7) /* 0: Link failure detection disabled, 1: Hardware scans for link failure in PHY */
134 #define METH_MAC_IPG 0x1ffff00
136 #define METH_DEFAULT_IPG ((17<<15) | (11<<22) | (21<<8))
137 /* 0x172e5c00 */ /* 23, 23, 23 */ /*0x54A9500 *//*21,21,21*/
138 /* Bits 8 through 14 are used to determine Inter-Packet Gap between "Back to Back" packets */
139 /* The gap depends on the clock speed of the link, 80ns per increment for 100baseT, 800ns */
140 /* per increment for 10BaseT */
142 /* Bits 15 through 21 are used to determine IPGR1 */
144 /* Bits 22 through 28 are used to determine IPGR2 */
146 #define METH_REV_SHIFT 29 /* Bits 29 through 31 are used to determine the revision */
147 /* 000: Initial revision */
148 /* 001: First revision, Improved TX concatenation */
151 /* DMA control bits */
152 #define METH_RX_OFFSET_SHIFT 12 /* Bits 12:14 of DMA control register indicate starting offset of packet data for RX operation */
153 #define METH_RX_DEPTH_SHIFT 4 /* Bits 8:4 define RX fifo depth -- when # of RX fifo entries != depth, interrupt is generted */
155 #define METH_DMA_TX_EN BIT(1) /* enable TX DMA */
156 #define METH_DMA_TX_INT_EN BIT(0) /* enable TX Buffer Empty interrupt */
157 #define METH_DMA_RX_EN BIT(15) /* Enable RX */
158 #define METH_DMA_RX_INT_EN BIT(9) /* Enable interrupt on RX packet */
160 /* RX FIFO MCL Info bits */
161 #define METH_RX_FIFO_WPTR(x) (((x)>>16)&0xf)
162 #define METH_RX_FIFO_RPTR(x) (((x)>>8)&0xf)
163 #define METH_RX_FIFO_DEPTH(x) ((x)&0x1f)
167 #define METH_RX_ST_VALID BIT(63)
168 #define METH_RX_ST_RCV_CODE_VIOLATION BIT(16)
169 #define METH_RX_ST_DRBL_NBL BIT(17)
170 #define METH_RX_ST_CRC_ERR BIT(18)
171 #define METH_RX_ST_MCAST_PKT BIT(19)
172 #define METH_RX_ST_BCAST_PKT BIT(20)
173 #define METH_RX_ST_INV_PREAMBLE_CTX BIT(21)
174 #define METH_RX_ST_LONG_EVT_SEEN BIT(22)
175 #define METH_RX_ST_BAD_PACKET BIT(23)
176 #define METH_RX_ST_CARRIER_EVT_SEEN BIT(24)
177 #define METH_RX_ST_MCAST_FILTER_MATCH BIT(25)
178 #define METH_RX_ST_PHYS_ADDR_MATCH BIT(26)
180 #define METH_RX_STATUS_ERRORS \
182 METH_RX_ST_RCV_CODE_VIOLATION| \
183 METH_RX_ST_CRC_ERR| \
184 METH_RX_ST_INV_PREAMBLE_CTX| \
185 METH_RX_ST_LONG_EVT_SEEN| \
186 METH_RX_ST_BAD_PACKET| \
187 METH_RX_ST_CARRIER_EVT_SEEN \
189 /* Bits in METH_INT */
190 /* Write _1_ to corresponding bit to clear */
191 #define METH_INT_TX_EMPTY BIT(0) /* 0: No interrupt pending, 1: The TX ring buffer is empty */
192 #define METH_INT_TX_PKT BIT(1) /* 0: No interrupt pending */
193 /* 1: A TX message had the INT request bit set, the packet has been sent. */
194 #define METH_INT_TX_LINK_FAIL BIT(2) /* 0: No interrupt pending, 1: PHY has reported a link failure */
195 #define METH_INT_MEM_ERROR BIT(3) /* 0: No interrupt pending */
196 /* 1: A memory error occurred during DMA, DMA stopped, Fatal */
197 #define METH_INT_TX_ABORT BIT(4) /* 0: No interrupt pending, 1: The TX aborted operation, DMA stopped, FATAL */
198 #define METH_INT_RX_THRESHOLD BIT(5) /* 0: No interrupt pending, 1: Selected receive threshold condition Valid */
199 #define METH_INT_RX_UNDERFLOW BIT(6) /* 0: No interrupt pending, 1: FIFO was empty, packet could not be queued */
200 #define METH_INT_RX_OVERFLOW BIT(7) /* 0: No interrupt pending, 1: DMA FIFO Overflow, DMA stopped, FATAL */
202 /*#define METH_INT_RX_RPTR_MASK 0x0001F00*/ /* Bits 8 through 12 alias of RX read-pointer */
203 #define METH_INT_RX_RPTR_MASK 0x0000F00 /* Bits 8 through 11 alias of RX read-pointer - so, is Rx FIFO 16 or 32 entry?*/
205 /* Bits 13 through 15 are always 0. */
207 #define METH_INT_TX_RPTR_MASK 0x1FF0000 /* Bits 16 through 24 alias of TX read-pointer */
209 #define METH_INT_RX_SEQ_MASK 0x2E000000 /* Bits 25 through 29 are the starting seq number for the message at the */
211 /* top of the queue */
213 #define METH_INT_ERROR (METH_INT_TX_LINK_FAIL| \
214 METH_INT_MEM_ERROR| \
216 METH_INT_RX_OVERFLOW| \
217 METH_INT_RX_UNDERFLOW)
219 #define METH_INT_MCAST_HASH BIT(30) /* If RX DMA is enabled the hash select logic output is latched here */
222 #define METH_TX_ST_DONE BIT(63) /* TX complete */
223 #define METH_TX_ST_SUCCESS BIT(23) /* Packet was transmitted successfully */
224 #define METH_TX_ST_TOOLONG BIT(24) /* TX abort due to excessive length */
225 #define METH_TX_ST_UNDERRUN BIT(25) /* TX abort due to underrun (?) */
226 #define METH_TX_ST_EXCCOLL BIT(26) /* TX abort due to excess collisions */
227 #define METH_TX_ST_DEFER BIT(27) /* TX abort due to excess deferals */
228 #define METH_TX_ST_LATECOLL BIT(28) /* TX abort due to late collision */
231 /* Tx command header bits */
232 #define METH_TX_CMD_INT_EN BIT(24) /* Generate TX interrupt when packet is sent */
234 /* Phy MDIO interface busy flag */
235 #define MDIO_BUSY BIT(16)
236 #define MDIO_DATA_MASK 0xFFFF
238 #define PHY_QS6612X 0x0181441 /* Quality TX */
239 #define PHY_ICS1889 0x0015F41 /* ICS FX */
240 #define PHY_ICS1890 0x0015F42 /* ICS TX */
241 #define PHY_DP83840 0x20005C0 /* National TX */
243 #define ADVANCE_RX_PTR(x) x=(x+1)&(RX_RING_ENTRIES-1)