]>
git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/blob - drivers/net/mipsnet.h
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
10 * Id of this Net device, as seen by the core.
12 #define MIPS_NET_DEV_ID ((uint64_t) \
13 ((uint64_t)'M'<< 0)| \
14 ((uint64_t)'I'<< 8)| \
15 ((uint64_t)'P'<<16)| \
16 ((uint64_t)'S'<<24)| \
17 ((uint64_t)'N'<<32)| \
18 ((uint64_t)'E'<<40)| \
19 ((uint64_t)'T'<<48)| \
23 * Net status/control block as seen by sw in the core.
24 * (Why not use bit fields? can't be bothered with cross-platform struct
27 typedef struct _net_control_block
{
28 /// dev info for probing
29 /// reads as MIPSNET%d where %d is some form of version
30 uint64_t devId
; /*0x00 */
33 * read only busy flag.
34 * Set and cleared by the Net Device to indicate that an rx or a tx
37 uint32_t busy
; /*0x08 */
40 * Set by the Net Device.
41 * The device will set it once data has been received.
42 * The value is the number of bytes that should be read from
43 * rxDataBuffer. The value will decrease till 0 until all the data
44 * from rxDataBuffer has been read.
46 uint32_t rxDataCount
; /*0x0c */
47 #define MIPSNET_MAX_RXTX_DATACOUNT (1<<16)
50 * Settable from the MIPS core, cleared by the Net Device.
51 * The core should set the number of bytes it wants to send,
52 * then it should write those bytes of data to txDataBuffer.
53 * The device will clear txDataCount has been processed (not necessarily sent).
55 uint32_t txDataCount
; /*0x10 */
60 * Used to clear the interrupted generated by this dev.
61 * Write a 1 to clear the interrupt. (except bit31).
63 * Bit0 is set if it was a tx-done interrupt.
64 * Bit1 is set when new rx-data is available.
65 * Until this bit is cleared there will be no other RXs.
67 * Bit31 is used for testing, it clears after a read.
68 * Writing 1 to this bit will cause an interrupt to be generated.
69 * To clear the test interrupt, write 0 to this register.
71 uint32_t interruptControl
; /*0x14 */
72 #define MIPSNET_INTCTL_TXDONE ((uint32_t)(1<< 0))
73 #define MIPSNET_INTCTL_RXDONE ((uint32_t)(1<< 1))
74 #define MIPSNET_INTCTL_TESTBIT ((uint32_t)(1<<31))
75 #define MIPSNET_INTCTL_ALLSOURCES (MIPSNET_INTCTL_TXDONE|MIPSNET_INTCTL_RXDONE|MIPSNET_INTCTL_TESTBIT)
78 * Readonly core-specific interrupt info for the device to signal the core.
79 * The meaning of the contents of this field might change.
81 /*###\todo: the whole memIntf interrupt scheme is messy: the device should have
82 * no control what so ever of what VPE/register set is being used.
83 * The MemIntf should only expose interrupt lines, and something in the
84 * config should be responsible for the line<->core/vpe bindings.
86 uint32_t interruptInfo
; /*0x18 */
89 * This is where the received data is read out.
90 * There is more data to read until rxDataReady is 0.
91 * Only 1 byte at this regs offset is used.
93 uint32_t rxDataBuffer
; /*0x1c */
96 * This is where the data to transmit is written.
97 * Data should be written for the amount specified in the txDataCount register.
98 * Only 1 byte at this regs offset is used.
100 uint32_t txDataBuffer
; /*0x20 */
103 #define MIPSNET_IO_EXTENT 0x40 /* being generous */
105 #define field_offset(field) ((int)&((MIPS_T_NetControl*)(0))->field)
107 #endif /* __MIPSNET_H */