drivers/net/phy/Kconfig

   1 #
   2 # PHY Layer Configuration
   3 #
   4
   5 menuconfig PHYLIB
   6         tristate "PHY Device support and infrastructure"
   7         depends on NETDEVICES
   8         help
   9           Ethernet controllers are usually attached to PHY
  10           devices.  This option provides infrastructure for
  11           managing PHY devices.
  12
  13 if PHYLIB
  14
  15 comment "MII PHY device drivers"
  16
  17 config AQUANTIA_PHY
  18         tristate "Drivers for the Aquantia PHYs"
  19         ---help---
  20           Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
  21
  22 config AT803X_PHY
  23         tristate "Drivers for Atheros AT803X PHYs"
  24         ---help---
  25           Currently supports the AT8030 and AT8035 model
  26
  27 config AMD_PHY
  28         tristate "Drivers for the AMD PHYs"
  29         ---help---
  30           Currently supports the am79c874
  31
  32 config MARVELL_PHY
  33         tristate "Drivers for Marvell PHYs"
  34         ---help---
  35           Currently has a driver for the 88E1011S
  36
  37 config DAVICOM_PHY
  38         tristate "Drivers for Davicom PHYs"
  39         ---help---
  40           Currently supports dm9161e and dm9131
  41
  42 config QSEMI_PHY
  43         tristate "Drivers for Quality Semiconductor PHYs"
  44         ---help---
  45           Currently supports the qs6612
  46
  47 config LXT_PHY
  48         tristate "Drivers for the Intel LXT PHYs"
  49         ---help---
  50           Currently supports the lxt970, lxt971
  51
  52 config CICADA_PHY
  53         tristate "Drivers for the Cicada PHYs"
  54         ---help---
  55           Currently supports the cis8204
  56
  57 config VITESSE_PHY
  58         tristate "Drivers for the Vitesse PHYs"
  59         ---help---
  60           Currently supports the vsc8244
  61
  62 config TERANETICS_PHY
  63         tristate "Drivers for the Teranetics PHYs"
  64         ---help---
  65           Currently supports the Teranetics TN2020
  66
  67 config SMSC_PHY
  68         tristate "Drivers for SMSC PHYs"
  69         ---help---
  70           Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
  71
  72 config BROADCOM_PHY
  73         tristate "Drivers for Broadcom PHYs"
  74         ---help---
  75           Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
  76           BCM5481 and BCM5482 PHYs.
  77
  78 config BCM63XX_PHY
  79         tristate "Drivers for Broadcom 63xx SOCs internal PHY"
  80         depends on BCM63XX
  81         ---help---
  82           Currently supports the 6348 and 6358 PHYs.
  83
  84 config BCM7XXX_PHY
  85         tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
  86         ---help---
  87           Currently supports the BCM7366, BCM7439, BCM7445, and
  88           40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
  89
  90 config BCM87XX_PHY
  91         tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"
  92         help
  93           Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
  94
  95 config ICPLUS_PHY
  96         tristate "Drivers for ICPlus PHYs"
  97         ---help---
  98           Currently supports the IP175C and IP1001 PHYs.
  99
 100 config REALTEK_PHY
 101         tristate "Drivers for Realtek PHYs"
 102         ---help---
 103           Supports the Realtek 821x PHY.
 104
 105 config NATIONAL_PHY
 106         tristate "Drivers for National Semiconductor PHYs"
 107         ---help---
 108           Currently supports the DP83865 PHY.
 109
 110 config STE10XP
 111         tristate "Driver for STMicroelectronics STe10Xp PHYs"
 112         ---help---
 113           This is the driver for the STe100p and STe101p PHYs.
 114
 115 config LSI_ET1011C_PHY
 116         tristate "Driver for LSI ET1011C PHY"
 117         ---help---
 118           Supports the LSI ET1011C PHY.
 119
 120 config MICREL_PHY
 121         tristate "Driver for Micrel PHYs"
 122         ---help---
 123           Supports the KSZ9021, VSC8201, KS8001 PHYs.
 124
 125 config DP83867_PHY
 126         tristate "Drivers for Texas Instruments DP83867 Gigabit PHY"
 127         ---help---
 128           Currently supports the DP83867 PHY.
 129
 130 config MICROCHIP_PHY
 131         tristate "Drivers for Microchip PHYs"
 132         help
 133           Supports the LAN88XX PHYs.
 134
 135 config FIXED_PHY
 136         tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
 137         depends on PHYLIB
 138         ---help---
 139           Adds the platform "fixed" MDIO Bus to cover the boards that use
 140           PHYs that are not connected to the real MDIO bus.
 141
 142           Currently tested with mpc866ads and mpc8349e-mitx.
 143
 144 config MDIO_BITBANG
 145         tristate "Support for bitbanged MDIO buses"
 146         help
 147           This module implements the MDIO bus protocol in software,
 148           for use by low level drivers that export the ability to
 149           drive the relevant pins.
 150
 151           If in doubt, say N.
 152
 153 config MDIO_GPIO
 154         tristate "Support for GPIO lib-based bitbanged MDIO buses"
 155         depends on MDIO_BITBANG && GPIOLIB
 156         ---help---
 157           Supports GPIO lib-based MDIO busses.
 158
 159           To compile this driver as a module, choose M here: the module
 160           will be called mdio-gpio.
 161
 162 config MDIO_OCTEON
 163         tristate "Support for MDIO buses on Octeon and ThunderX SOCs"
 164         depends on 64BIT
 165         help
 166
 167           This module provides a driver for the Octeon and ThunderX MDIO
 168           busses. It is required by the Octeon and ThunderX ethernet device
 169           drivers.
 170
 171 config MDIO_SUN4I
 172         tristate "Allwinner sun4i MDIO interface support"
 173         depends on ARCH_SUNXI
 174         help
 175           This driver supports the MDIO interface found in the network
 176           interface units of the Allwinner SoC that have an EMAC (A10,
 177           A12, A10s, etc.)
 178
 179 config MDIO_MOXART
 180         tristate "MOXA ART MDIO interface support"
 181         depends on ARCH_MOXART
 182         help
 183           This driver supports the MDIO interface found in the network
 184           interface units of the MOXA ART SoC
 185
 186 config MDIO_BUS_MUX
 187         tristate
 188         depends on OF_MDIO
 189         help
 190           This module provides a driver framework for MDIO bus
 191           multiplexers which connect one of several child MDIO busses
 192           to a parent bus.  Switching between child busses is done by
 193           device specific drivers.
 194
 195 config MDIO_BUS_MUX_GPIO
 196         tristate "Support for GPIO controlled MDIO bus multiplexers"
 197         depends on OF_GPIO && OF_MDIO
 198         select MDIO_BUS_MUX
 199         help
 200           This module provides a driver for MDIO bus multiplexers that
 201           are controlled via GPIO lines.  The multiplexer connects one of
 202           several child MDIO busses to a parent bus.  Child bus
 203           selection is under the control of GPIO lines.
 204
 205 config MDIO_BUS_MUX_MMIOREG
 206         tristate "Support for MMIO device-controlled MDIO bus multiplexers"
 207         depends on OF_MDIO && HAS_IOMEM
 208         select MDIO_BUS_MUX
 209         help
 210           This module provides a driver for MDIO bus multiplexers that
 211           are controlled via a simple memory-mapped device, like an FPGA.
 212           The multiplexer connects one of several child MDIO busses to a
 213           parent bus.  Child bus selection is under the control of one of
 214           the FPGA's registers.
 215
 216           Currently, only 8-bit registers are supported.
 217
 218 config MDIO_BCM_UNIMAC
 219         tristate "Broadcom UniMAC MDIO bus controller"
 220         depends on HAS_IOMEM
 221         help
 222           This module provides a driver for the Broadcom UniMAC MDIO busses.
 223           This hardware can be found in the Broadcom GENET Ethernet MAC
 224           controllers as well as some Broadcom Ethernet switches such as the
 225           Starfighter 2 switches.
 226 endif # PHYLIB
 227
 228 config MICREL_KS8995MA
 229         tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
 230         depends on SPI