drivers/net/phy/Kconfig

   1 #
   2 # PHY Layer Configuration
   3 #
   4
   5 menuconfig PHYLIB
   6         tristate "PHY Device support and infrastructure"
   7         depends on NETDEVICES
   8         help
   9           Ethernet controllers are usually attached to PHY
  10           devices.  This option provides infrastructure for
  11           managing PHY devices.
  12
  13 if PHYLIB
  14
  15 config SWPHY
  16         bool
  17
  18 comment "MII PHY device drivers"
  19
  20 config AQUANTIA_PHY
  21         tristate "Drivers for the Aquantia PHYs"
  22         ---help---
  23           Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
  24
  25 config AT803X_PHY
  26         tristate "Drivers for Atheros AT803X PHYs"
  27         ---help---
  28           Currently supports the AT8030 and AT8035 model
  29
  30 config AMD_PHY
  31         tristate "Drivers for the AMD PHYs"
  32         ---help---
  33           Currently supports the am79c874
  34
  35 config MARVELL_PHY
  36         tristate "Drivers for Marvell PHYs"
  37         ---help---
  38           Currently has a driver for the 88E1011S
  39
  40 config DAVICOM_PHY
  41         tristate "Drivers for Davicom PHYs"
  42         ---help---
  43           Currently supports dm9161e and dm9131
  44
  45 config QSEMI_PHY
  46         tristate "Drivers for Quality Semiconductor PHYs"
  47         ---help---
  48           Currently supports the qs6612
  49
  50 config LXT_PHY
  51         tristate "Drivers for the Intel LXT PHYs"
  52         ---help---
  53           Currently supports the lxt970, lxt971
  54
  55 config CICADA_PHY
  56         tristate "Drivers for the Cicada PHYs"
  57         ---help---
  58           Currently supports the cis8204
  59
  60 config VITESSE_PHY
  61         tristate "Drivers for the Vitesse PHYs"
  62         ---help---
  63           Currently supports the vsc8244
  64
  65 config TERANETICS_PHY
  66         tristate "Drivers for the Teranetics PHYs"
  67         ---help---
  68           Currently supports the Teranetics TN2020
  69
  70 config SMSC_PHY
  71         tristate "Drivers for SMSC PHYs"
  72         ---help---
  73           Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
  74
  75 config BCM_NET_PHYLIB
  76         tristate
  77
  78 config BROADCOM_PHY
  79         tristate "Drivers for Broadcom PHYs"
  80         select BCM_NET_PHYLIB
  81         ---help---
  82           Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
  83           BCM5481 and BCM5482 PHYs.
  84
  85 config BCM_CYGNUS_PHY
  86         tristate "Drivers for Broadcom Cygnus SoC internal PHY"
  87         depends on ARCH_BCM_CYGNUS || COMPILE_TEST
  88         depends on MDIO_BCM_IPROC
  89         select BCM_NET_PHYLIB
  90         ---help---
  91           This PHY driver is for the 1G internal PHYs of the Broadcom
  92           Cygnus Family SoC.
  93
  94           Currently supports internal PHY's used in the BCM11300,
  95           BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
  96           BCM58303 & BCM58305 Broadcom Cygnus SoCs.
  97
  98 config BCM63XX_PHY
  99         tristate "Drivers for Broadcom 63xx SOCs internal PHY"
 100         depends on BCM63XX
 101         select BCM_NET_PHYLIB
 102         ---help---
 103           Currently supports the 6348 and 6358 PHYs.
 104
 105 config BCM7XXX_PHY
 106         tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
 107         select BCM_NET_PHYLIB
 108         ---help---
 109           Currently supports the BCM7366, BCM7439, BCM7445, and
 110           40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
 111
 112 config BCM87XX_PHY
 113         tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"
 114         help
 115           Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
 116
 117 config ICPLUS_PHY
 118         tristate "Drivers for ICPlus PHYs"
 119         ---help---
 120           Currently supports the IP175C and IP1001 PHYs.
 121
 122 config REALTEK_PHY
 123         tristate "Drivers for Realtek PHYs"
 124         ---help---
 125           Supports the Realtek 821x PHY.
 126
 127 config NATIONAL_PHY
 128         tristate "Drivers for National Semiconductor PHYs"
 129         ---help---
 130           Currently supports the DP83865 PHY.
 131
 132 config STE10XP
 133         tristate "Driver for STMicroelectronics STe10Xp PHYs"
 134         ---help---
 135           This is the driver for the STe100p and STe101p PHYs.
 136
 137 config LSI_ET1011C_PHY
 138         tristate "Driver for LSI ET1011C PHY"
 139         ---help---
 140           Supports the LSI ET1011C PHY.
 141
 142 config MICREL_PHY
 143         tristate "Driver for Micrel PHYs"
 144         ---help---
 145           Supports the KSZ9021, VSC8201, KS8001 PHYs.
 146
 147 config DP83848_PHY
 148         tristate "Driver for Texas Instruments DP83848 PHY"
 149         ---help---
 150           Supports the DP83848 PHY.
 151
 152 config DP83867_PHY
 153         tristate "Drivers for Texas Instruments DP83867 Gigabit PHY"
 154         ---help---
 155           Currently supports the DP83867 PHY.
 156
 157 config MICROCHIP_PHY
 158         tristate "Drivers for Microchip PHYs"
 159         help
 160           Supports the LAN88XX PHYs.
 161
 162 config FIXED_PHY
 163         tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
 164         depends on PHYLIB
 165         select SWPHY
 166         ---help---
 167           Adds the platform "fixed" MDIO Bus to cover the boards that use
 168           PHYs that are not connected to the real MDIO bus.
 169
 170           Currently tested with mpc866ads and mpc8349e-mitx.
 171
 172 config MDIO_BITBANG
 173         tristate "Support for bitbanged MDIO buses"
 174         help
 175           This module implements the MDIO bus protocol in software,
 176           for use by low level drivers that export the ability to
 177           drive the relevant pins.
 178
 179           If in doubt, say N.
 180
 181 config MDIO_GPIO
 182         tristate "Support for GPIO lib-based bitbanged MDIO buses"
 183         depends on MDIO_BITBANG && GPIOLIB
 184         ---help---
 185           Supports GPIO lib-based MDIO busses.
 186
 187           To compile this driver as a module, choose M here: the module
 188           will be called mdio-gpio.
 189
 190 config MDIO_CAVIUM
 191         tristate
 192
 193 config MDIO_OCTEON
 194         tristate "Support for MDIO buses on Octeon and some ThunderX SOCs"
 195         depends on 64BIT
 196         depends on HAS_IOMEM
 197         select MDIO_CAVIUM
 198         help
 199           This module provides a driver for the Octeon and ThunderX MDIO
 200           buses. It is required by the Octeon and ThunderX ethernet device
 201           drivers on some systems.
 202
 203 config MDIO_THUNDER
 204         tristate "Support for MDIO buses on ThunderX SOCs"
 205         depends on 64BIT
 206         depends on PCI
 207         select MDIO_CAVIUM
 208         help
 209           This driver supports the MDIO interfaces found on Cavium
 210           ThunderX SoCs when the MDIO bus device appears as a PCI
 211           device.
 212
 213
 214 config MDIO_SUN4I
 215         tristate "Allwinner sun4i MDIO interface support"
 216         depends on ARCH_SUNXI
 217         help
 218           This driver supports the MDIO interface found in the network
 219           interface units of the Allwinner SoC that have an EMAC (A10,
 220           A12, A10s, etc.)
 221
 222 config MDIO_MOXART
 223         tristate "MOXA ART MDIO interface support"
 224         depends on ARCH_MOXART
 225         help
 226           This driver supports the MDIO interface found in the network
 227           interface units of the MOXA ART SoC
 228
 229 config MDIO_BUS_MUX
 230         tristate
 231         depends on OF_MDIO
 232         help
 233           This module provides a driver framework for MDIO bus
 234           multiplexers which connect one of several child MDIO busses
 235           to a parent bus.  Switching between child busses is done by
 236           device specific drivers.
 237
 238 config MDIO_BUS_MUX_GPIO
 239         tristate "Support for GPIO controlled MDIO bus multiplexers"
 240         depends on OF_GPIO && OF_MDIO
 241         select MDIO_BUS_MUX
 242         help
 243           This module provides a driver for MDIO bus multiplexers that
 244           are controlled via GPIO lines.  The multiplexer connects one of
 245           several child MDIO busses to a parent bus.  Child bus
 246           selection is under the control of GPIO lines.
 247
 248 config MDIO_BUS_MUX_MMIOREG
 249         tristate "Support for MMIO device-controlled MDIO bus multiplexers"
 250         depends on OF_MDIO && HAS_IOMEM
 251         select MDIO_BUS_MUX
 252         help
 253           This module provides a driver for MDIO bus multiplexers that
 254           are controlled via a simple memory-mapped device, like an FPGA.
 255           The multiplexer connects one of several child MDIO busses to a
 256           parent bus.  Child bus selection is under the control of one of
 257           the FPGA's registers.
 258
 259           Currently, only 8-bit registers are supported.
 260
 261 config MDIO_BUS_MUX_BCM_IPROC
 262         tristate "Support for iProc based MDIO bus multiplexers"
 263         depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)
 264         select MDIO_BUS_MUX
 265         default ARCH_BCM_IPROC
 266         help
 267           This module provides a driver for MDIO bus multiplexers found in
 268           iProc based Broadcom SoCs. This multiplexer connects one of several
 269           child MDIO bus to a parent bus. Buses could be internal as well as
 270           external and selection logic lies inside the same multiplexer.
 271
 272 config MDIO_BCM_UNIMAC
 273         tristate "Broadcom UniMAC MDIO bus controller"
 274         depends on HAS_IOMEM
 275         help
 276           This module provides a driver for the Broadcom UniMAC MDIO busses.
 277           This hardware can be found in the Broadcom GENET Ethernet MAC
 278           controllers as well as some Broadcom Ethernet switches such as the
 279           Starfighter 2 switches.
 280
 281 config MDIO_BCM_IPROC
 282         tristate "Broadcom iProc MDIO bus controller"
 283         depends on ARCH_BCM_IPROC || COMPILE_TEST
 284         depends on HAS_IOMEM && OF_MDIO
 285         help
 286           This module provides a driver for the MDIO busses found in the
 287           Broadcom iProc SoC's.
 288
 289 config INTEL_XWAY_PHY
 290         tristate "Driver for Intel XWAY PHYs"
 291         ---help---
 292           Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.
 293           These PHYs are marked as standalone chips under the names
 294           PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel
 295           SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.
 296
 297 config MDIO_HISI_FEMAC
 298         tristate "Hisilicon FEMAC MDIO bus controller"
 299         depends on HAS_IOMEM && OF_MDIO
 300         help
 301           This module provides a driver for the MDIO busses found in the
 302           Hisilicon SoC that have an Fast Ethernet MAC.
 303
 304 config MDIO_XGENE
 305         tristate "APM X-Gene SoC MDIO bus controller"
 306         help
 307           This module provides a driver for the MDIO busses found in the
 308           APM X-Gene SoC's.
 309
 310 endif # PHYLIB
 311
 312 config MICREL_KS8995MA
 313         tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
 314         depends on SPI