drivers/net/phy/Kconfig

   1 # SPDX-License-Identifier: GPL-2.0-only
   2 #
   3 # PHY Layer Configuration
   4 #
   5
   6 config PHYLINK
   7         tristate
   8         depends on NETDEVICES
   9         select PHYLIB
  10         select SWPHY
  11         help
  12           PHYlink models the link between the PHY and MAC, allowing fixed
  13           configuration links, PHYs, and Serdes links with MAC level
  14           autonegotiation modes.
  15
  16 menuconfig PHYLIB
  17         tristate "PHY Device support and infrastructure"
  18         depends on NETDEVICES
  19         select MDIO_DEVICE
  20         select MDIO_DEVRES
  21         help
  22           Ethernet controllers are usually attached to PHY
  23           devices.  This option provides infrastructure for
  24           managing PHY devices.
  25
  26 if PHYLIB
  27
  28 config SWPHY
  29         bool
  30
  31 config LED_TRIGGER_PHY
  32         bool "Support LED triggers for tracking link state"
  33         depends on LEDS_TRIGGERS
  34         help
  35           Adds support for a set of LED trigger events per-PHY.  Link
  36           state change will trigger the events, for consumption by an
  37           LED class driver.  There are triggers for each link speed currently
  38           supported by the PHY and also a one common "link" trigger as a
  39           logical-or of all the link speed ones.
  40           All these triggers are named according to the following pattern:
  41               <mii bus id>:<phy>:<speed>
  42
  43           Where speed is in the form:
  44                 <Speed in megabits>Mbps OR <Speed in gigabits>Gbps OR link
  45                 for any speed known to the PHY.
  46
  47
  48 config FIXED_PHY
  49         tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
  50         depends on PHYLIB
  51         select SWPHY
  52         help
  53           Adds the platform "fixed" MDIO Bus to cover the boards that use
  54           PHYs that are not connected to the real MDIO bus.
  55
  56           Currently tested with mpc866ads and mpc8349e-mitx.
  57
  58 config SFP
  59         tristate "SFP cage support"
  60         depends on I2C && PHYLINK
  61         depends on HWMON || HWMON=n
  62         select MDIO_I2C
  63
  64 comment "MII PHY device drivers"
  65
  66 config AMD_PHY
  67         tristate "AMD PHYs"
  68         help
  69           Currently supports the am79c874
  70
  71 config MESON_GXL_PHY
  72         tristate "Amlogic Meson GXL Internal PHY"
  73         depends on ARCH_MESON || COMPILE_TEST
  74         help
  75           Currently has a driver for the Amlogic Meson GXL Internal PHY
  76
  77 config ADIN_PHY
  78         tristate "Analog Devices Industrial Ethernet PHYs"
  79         help
  80           Adds support for the Analog Devices Industrial Ethernet PHYs.
  81           Currently supports the:
  82           - ADIN1200 - Robust,Industrial, Low Power 10/100 Ethernet PHY
  83           - ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit
  84             Ethernet PHY
  85
  86 config AQUANTIA_PHY
  87         tristate "Aquantia PHYs"
  88         help
  89           Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
  90
  91 config AX88796B_PHY
  92         tristate "Asix PHYs"
  93         help
  94           Currently supports the Asix Electronics PHY found in the X-Surf 100
  95           AX88796B package.
  96
  97 config BROADCOM_PHY
  98         tristate "Broadcom 54XX PHYs"
  99         select BCM_NET_PHYLIB
 100         help
 101           Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
 102           BCM5481, BCM54810 and BCM5482 PHYs.
 103
 104 config BCM54140_PHY
 105         tristate "Broadcom BCM54140 PHY"
 106         depends on PHYLIB
 107         depends on HWMON || HWMON=n
 108         select BCM_NET_PHYLIB
 109         help
 110           Support the Broadcom BCM54140 Quad SGMII/QSGMII PHY.
 111
 112           This driver also supports the hardware monitoring of this PHY and
 113           exposes voltage and temperature sensors.
 114
 115 config BCM63XX_PHY
 116         tristate "Broadcom 63xx SOCs internal PHY"
 117         depends on BCM63XX || COMPILE_TEST
 118         select BCM_NET_PHYLIB
 119         help
 120           Currently supports the 6348 and 6358 PHYs.
 121
 122 config BCM7XXX_PHY
 123         tristate "Broadcom 7xxx SOCs internal PHYs"
 124         select BCM_NET_PHYLIB
 125         help
 126           Currently supports the BCM7366, BCM7439, BCM7445, and
 127           40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
 128
 129 config BCM84881_PHY
 130         tristate "Broadcom BCM84881 PHY"
 131         depends on PHYLIB
 132         help
 133           Support the Broadcom BCM84881 PHY.
 134
 135 config BCM87XX_PHY
 136         tristate "Broadcom BCM8706 and BCM8727 PHYs"
 137         help
 138           Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
 139
 140 config BCM_CYGNUS_PHY
 141         tristate "Broadcom Cygnus/Omega SoC internal PHY"
 142         depends on ARCH_BCM_IPROC || COMPILE_TEST
 143         depends on MDIO_BCM_IPROC
 144         select BCM_NET_PHYLIB
 145         help
 146           This PHY driver is for the 1G internal PHYs of the Broadcom
 147           Cygnus and Omega Family SoC.
 148
 149           Currently supports internal PHY's used in the BCM11300,
 150           BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
 151           BCM58303 & BCM58305 Broadcom Cygnus SoCs.
 152
 153 config BCM_NET_PHYLIB
 154         tristate
 155
 156 config CICADA_PHY
 157         tristate "Cicada PHYs"
 158         help
 159           Currently supports the cis8204
 160
 161 config CORTINA_PHY
 162         tristate "Cortina EDC CDR 10G Ethernet PHY"
 163         help
 164           Currently supports the CS4340 phy.
 165
 166 config DAVICOM_PHY
 167         tristate "Davicom PHYs"
 168         help
 169           Currently supports dm9161e and dm9131
 170
 171 config ICPLUS_PHY
 172         tristate "ICPlus PHYs"
 173         help
 174           Currently supports the IP175C and IP1001 PHYs.
 175
 176 config LXT_PHY
 177         tristate "Intel LXT PHYs"
 178         help
 179           Currently supports the lxt970, lxt971
 180
 181 config INTEL_XWAY_PHY
 182         tristate "Intel XWAY PHYs"
 183         help
 184           Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.
 185           These PHYs are marked as standalone chips under the names
 186           PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel
 187           SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.
 188
 189 config LSI_ET1011C_PHY
 190         tristate "LSI ET1011C PHY"
 191         help
 192           Supports the LSI ET1011C PHY.
 193
 194 config MARVELL_PHY
 195         tristate "Marvell Alaska PHYs"
 196         help
 197           Currently has a driver for the 88E1XXX
 198
 199 config MARVELL_10G_PHY
 200         tristate "Marvell Alaska 10Gbit PHYs"
 201         help
 202           Support for the Marvell Alaska MV88X3310 and compatible PHYs.
 203
 204 config MICREL_PHY
 205         tristate "Micrel PHYs"
 206         help
 207           Supports the KSZ9021, VSC8201, KS8001 PHYs.
 208
 209 config MICROCHIP_PHY
 210         tristate "Microchip PHYs"
 211         help
 212           Supports the LAN88XX PHYs.
 213
 214 config MICROCHIP_T1_PHY
 215         tristate "Microchip T1 PHYs"
 216         help
 217           Supports the LAN87XX PHYs.
 218
 219 config MICROSEMI_PHY
 220         tristate "Microsemi PHYs"
 221         depends on MACSEC || MACSEC=n
 222         select CRYPTO_LIB_AES if MACSEC
 223         help
 224           Currently supports VSC8514, VSC8530, VSC8531, VSC8540 and VSC8541 PHYs
 225
 226 config NATIONAL_PHY
 227         tristate "National Semiconductor PHYs"
 228         help
 229           Currently supports the DP83865 PHY.
 230
 231 config NXP_TJA11XX_PHY
 232         tristate "NXP TJA11xx PHYs support"
 233         depends on HWMON
 234         help
 235           Currently supports the NXP TJA1100 and TJA1101 PHY.
 236
 237 config AT803X_PHY
 238         tristate "Qualcomm Atheros AR803X PHYs"
 239         depends on REGULATOR
 240         help
 241           Currently supports the AR8030, AR8031, AR8033 and AR8035 model
 242
 243 config QSEMI_PHY
 244         tristate "Quality Semiconductor PHYs"
 245         help
 246           Currently supports the qs6612
 247
 248 config REALTEK_PHY
 249         tristate "Realtek PHYs"
 250         help
 251           Supports the Realtek 821x PHY.
 252
 253 config RENESAS_PHY
 254         tristate "Renesas PHYs"
 255         help
 256           Supports the Renesas PHYs uPD60620 and uPD60620A.
 257
 258 config ROCKCHIP_PHY
 259         tristate "Rockchip Ethernet PHYs"
 260         help
 261           Currently supports the integrated Ethernet PHY.
 262
 263 config SMSC_PHY
 264         tristate "SMSC PHYs"
 265         help
 266           Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
 267
 268 config STE10XP
 269         tristate "STMicroelectronics STe10Xp PHYs"
 270         help
 271           This is the driver for the STe100p and STe101p PHYs.
 272
 273 config TERANETICS_PHY
 274         tristate "Teranetics PHYs"
 275         help
 276           Currently supports the Teranetics TN2020
 277
 278 config DP83822_PHY
 279         tristate "Texas Instruments DP83822/825/826 PHYs"
 280         help
 281           Supports the DP83822, DP83825I, DP83825CM, DP83825CS, DP83825S,
 282           DP83826C and DP83826NC PHYs.
 283
 284 config DP83TC811_PHY
 285         tristate "Texas Instruments DP83TC811 PHY"
 286         help
 287           Supports the DP83TC811 PHY.
 288
 289 config DP83848_PHY
 290         tristate "Texas Instruments DP83848 PHY"
 291         help
 292           Supports the DP83848 PHY.
 293
 294 config DP83867_PHY
 295         tristate "Texas Instruments DP83867 Gigabit PHY"
 296         help
 297           Currently supports the DP83867 PHY.
 298
 299 config DP83869_PHY
 300         tristate "Texas Instruments DP83869 Gigabit PHY"
 301         help
 302           Currently supports the DP83869 PHY.  This PHY supports copper and
 303           fiber connections.
 304
 305 config VITESSE_PHY
 306         tristate "Vitesse PHYs"
 307         help
 308           Currently supports the vsc8244
 309
 310 config XILINX_GMII2RGMII
 311         tristate "Xilinx GMII2RGMII converter driver"
 312         help
 313           This driver support xilinx GMII to RGMII IP core it provides
 314           the Reduced Gigabit Media Independent Interface(RGMII) between
 315           Ethernet physical media devices and the Gigabit Ethernet controller.
 316
 317 endif # PHYLIB
 318
 319 config MICREL_KS8995MA
 320         tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
 321         depends on SPI