drivers/net/phy/Kconfig

   1 #
   2 # PHY Layer Configuration
   3 #
   4
   5 menuconfig MDIO_DEVICE
   6         tristate "MDIO bus device drivers"
   7         help
   8            MDIO devices and driver infrastructure code.
   9
  10 config MDIO_BUS
  11         tristate
  12         default m if PHYLIB=m
  13         default MDIO_DEVICE
  14         help
  15           This internal symbol is used for link time dependencies and it
  16           reflects whether the mdio_bus/mdio_device code is built as a
  17           loadable module or built-in.
  18
  19 if MDIO_BUS
  20
  21 config MDIO_BCM_IPROC
  22         tristate "Broadcom iProc MDIO bus controller"
  23         depends on ARCH_BCM_IPROC || COMPILE_TEST
  24         depends on HAS_IOMEM && OF_MDIO
  25         help
  26           This module provides a driver for the MDIO busses found in the
  27           Broadcom iProc SoC's.
  28
  29 config MDIO_BCM_UNIMAC
  30         tristate "Broadcom UniMAC MDIO bus controller"
  31         depends on HAS_IOMEM && OF_MDIO
  32         help
  33           This module provides a driver for the Broadcom UniMAC MDIO busses.
  34           This hardware can be found in the Broadcom GENET Ethernet MAC
  35           controllers as well as some Broadcom Ethernet switches such as the
  36           Starfighter 2 switches.
  37
  38 config MDIO_BITBANG
  39         tristate "Bitbanged MDIO buses"
  40         help
  41           This module implements the MDIO bus protocol in software,
  42           for use by low level drivers that export the ability to
  43           drive the relevant pins.
  44
  45           If in doubt, say N.
  46
  47 config MDIO_BUS_MUX
  48         tristate
  49         depends on OF_MDIO
  50         help
  51           This module provides a driver framework for MDIO bus
  52           multiplexers which connect one of several child MDIO busses
  53           to a parent bus.  Switching between child busses is done by
  54           device specific drivers.
  55
  56 config MDIO_BUS_MUX_BCM_IPROC
  57         tristate "Broadcom iProc based MDIO bus multiplexers"
  58         depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)
  59         select MDIO_BUS_MUX
  60         default ARCH_BCM_IPROC
  61         help
  62           This module provides a driver for MDIO bus multiplexers found in
  63           iProc based Broadcom SoCs. This multiplexer connects one of several
  64           child MDIO bus to a parent bus. Buses could be internal as well as
  65           external and selection logic lies inside the same multiplexer.
  66
  67 config MDIO_BUS_MUX_GPIO
  68         tristate "GPIO controlled MDIO bus multiplexers"
  69         depends on OF_GPIO && OF_MDIO
  70         select MDIO_BUS_MUX
  71         help
  72           This module provides a driver for MDIO bus multiplexers that
  73           are controlled via GPIO lines.  The multiplexer connects one of
  74           several child MDIO busses to a parent bus.  Child bus
  75           selection is under the control of GPIO lines.
  76
  77 config MDIO_BUS_MUX_MMIOREG
  78         tristate "MMIO device-controlled MDIO bus multiplexers"
  79         depends on OF_MDIO && HAS_IOMEM
  80         select MDIO_BUS_MUX
  81         help
  82           This module provides a driver for MDIO bus multiplexers that
  83           are controlled via a simple memory-mapped device, like an FPGA.
  84           The multiplexer connects one of several child MDIO busses to a
  85           parent bus.  Child bus selection is under the control of one of
  86           the FPGA's registers.
  87
  88           Currently, only 8-bit registers are supported.
  89
  90 config MDIO_CAVIUM
  91         tristate
  92
  93 config MDIO_GPIO
  94         tristate "GPIO lib-based bitbanged MDIO buses"
  95         depends on MDIO_BITBANG && GPIOLIB
  96         ---help---
  97           Supports GPIO lib-based MDIO busses.
  98
  99           To compile this driver as a module, choose M here: the module
 100           will be called mdio-gpio.
 101
 102 config MDIO_HISI_FEMAC
 103         tristate "Hisilicon FEMAC MDIO bus controller"
 104         depends on HAS_IOMEM && OF_MDIO
 105         help
 106           This module provides a driver for the MDIO busses found in the
 107           Hisilicon SoC that have an Fast Ethernet MAC.
 108
 109 config MDIO_MOXART
 110         tristate "MOXA ART MDIO interface support"
 111         depends on ARCH_MOXART
 112         help
 113           This driver supports the MDIO interface found in the network
 114           interface units of the MOXA ART SoC
 115
 116 config MDIO_OCTEON
 117         tristate "Octeon and some ThunderX SOCs MDIO buses"
 118         depends on 64BIT
 119         depends on HAS_IOMEM && OF_MDIO
 120         select MDIO_CAVIUM
 121         help
 122           This module provides a driver for the Octeon and ThunderX MDIO
 123           buses. It is required by the Octeon and ThunderX ethernet device
 124           drivers on some systems.
 125
 126 config MDIO_SUN4I
 127         tristate "Allwinner sun4i MDIO interface support"
 128         depends on ARCH_SUNXI
 129         help
 130           This driver supports the MDIO interface found in the network
 131           interface units of the Allwinner SoC that have an EMAC (A10,
 132           A12, A10s, etc.)
 133
 134 config MDIO_THUNDER
 135         tristate "ThunderX SOCs MDIO buses"
 136         depends on 64BIT
 137         depends on PCI
 138         select MDIO_CAVIUM
 139         help
 140           This driver supports the MDIO interfaces found on Cavium
 141           ThunderX SoCs when the MDIO bus device appears as a PCI
 142           device.
 143
 144 config MDIO_XGENE
 145         tristate "APM X-Gene SoC MDIO bus controller"
 146         depends on ARCH_XGENE || COMPILE_TEST
 147         help
 148           This module provides a driver for the MDIO busses found in the
 149           APM X-Gene SoC's.
 150
 151 endif
 152
 153 menuconfig PHYLIB
 154         tristate "PHY Device support and infrastructure"
 155         depends on NETDEVICES
 156         select MDIO_DEVICE
 157         help
 158           Ethernet controllers are usually attached to PHY
 159           devices.  This option provides infrastructure for
 160           managing PHY devices.
 161
 162 if PHYLIB
 163
 164 config SWPHY
 165         bool
 166
 167 config LED_TRIGGER_PHY
 168         bool "Support LED triggers for tracking link state"
 169         depends on LEDS_TRIGGERS
 170         ---help---
 171           Adds support for a set of LED trigger events per-PHY.  Link
 172           state change will trigger the events, for consumption by an
 173           LED class driver.  There are triggers for each link speed currently
 174           supported by the phy, and are of the form:
 175                <mii bus id>:<phy>:<speed>
 176
 177           Where speed is in the form:
 178                 <Speed in megabits>Mbps or <Speed in gigabits>Gbps
 179
 180
 181 comment "MII PHY device drivers"
 182
 183 config AMD_PHY
 184         tristate "AMD PHYs"
 185         ---help---
 186           Currently supports the am79c874
 187
 188 config AQUANTIA_PHY
 189         tristate "Aquantia PHYs"
 190         ---help---
 191           Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
 192
 193 config AT803X_PHY
 194         tristate "AT803X PHYs"
 195         ---help---
 196           Currently supports the AT8030 and AT8035 model
 197
 198 config BCM63XX_PHY
 199         tristate "Broadcom 63xx SOCs internal PHY"
 200         depends on BCM63XX
 201         select BCM_NET_PHYLIB
 202         ---help---
 203           Currently supports the 6348 and 6358 PHYs.
 204
 205 config BCM7XXX_PHY
 206         tristate "Broadcom 7xxx SOCs internal PHYs"
 207         select BCM_NET_PHYLIB
 208         ---help---
 209           Currently supports the BCM7366, BCM7439, BCM7445, and
 210           40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
 211
 212 config BCM87XX_PHY
 213         tristate "Broadcom BCM8706 and BCM8727 PHYs"
 214         help
 215           Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
 216
 217 config BCM_CYGNUS_PHY
 218         tristate "Broadcom Cygnus SoC internal PHY"
 219         depends on ARCH_BCM_CYGNUS || COMPILE_TEST
 220         depends on MDIO_BCM_IPROC
 221         select BCM_NET_PHYLIB
 222         ---help---
 223           This PHY driver is for the 1G internal PHYs of the Broadcom
 224           Cygnus Family SoC.
 225
 226           Currently supports internal PHY's used in the BCM11300,
 227           BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
 228           BCM58303 & BCM58305 Broadcom Cygnus SoCs.
 229
 230 config BCM_NET_PHYLIB
 231         tristate
 232
 233 config BROADCOM_PHY
 234         tristate "Broadcom PHYs"
 235         select BCM_NET_PHYLIB
 236         ---help---
 237           Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
 238           BCM5481, BCM54810 and BCM5482 PHYs.
 239
 240 config CICADA_PHY
 241         tristate "Cicada PHYs"
 242         ---help---
 243           Currently supports the cis8204
 244
 245 config CORTINA_PHY
 246         tristate "Cortina EDC CDR 10G Ethernet PHY"
 247         ---help---
 248           Currently supports the CS4340 phy.
 249
 250 config DAVICOM_PHY
 251         tristate "Davicom PHYs"
 252         ---help---
 253           Currently supports dm9161e and dm9131
 254
 255 config DP83848_PHY
 256         tristate "Texas Instruments DP83848 PHY"
 257         ---help---
 258           Supports the DP83848 PHY.
 259
 260 config DP83867_PHY
 261         tristate "Texas Instruments DP83867 Gigabit PHY"
 262         ---help---
 263           Currently supports the DP83867 PHY.
 264
 265 config FIXED_PHY
 266         tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
 267         depends on PHYLIB
 268         select SWPHY
 269         ---help---
 270           Adds the platform "fixed" MDIO Bus to cover the boards that use
 271           PHYs that are not connected to the real MDIO bus.
 272
 273           Currently tested with mpc866ads and mpc8349e-mitx.
 274
 275 config ICPLUS_PHY
 276         tristate "ICPlus PHYs"
 277         ---help---
 278           Currently supports the IP175C and IP1001 PHYs.
 279
 280 config INTEL_XWAY_PHY
 281         tristate "Intel XWAY PHYs"
 282         ---help---
 283           Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.
 284           These PHYs are marked as standalone chips under the names
 285           PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel
 286           SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.
 287
 288 config LSI_ET1011C_PHY
 289         tristate "LSI ET1011C PHY"
 290         ---help---
 291           Supports the LSI ET1011C PHY.
 292
 293 config LXT_PHY
 294         tristate "Intel LXT PHYs"
 295         ---help---
 296           Currently supports the lxt970, lxt971
 297
 298 config MARVELL_PHY
 299         tristate "Marvell PHYs"
 300         ---help---
 301           Currently has a driver for the 88E1011S
 302
 303 config MARVELL_10G_PHY
 304         tristate "Marvell Alaska 10Gbit PHYs"
 305         ---help---
 306           Support for the Marvell Alaska MV88X3310 and compatible PHYs.
 307
 308 config MESON_GXL_PHY
 309         tristate "Amlogic Meson GXL Internal PHY"
 310         depends on ARCH_MESON || COMPILE_TEST
 311         ---help---
 312           Currently has a driver for the Amlogic Meson GXL Internal PHY
 313
 314 config MICREL_PHY
 315         tristate "Micrel PHYs"
 316         ---help---
 317           Supports the KSZ9021, VSC8201, KS8001 PHYs.
 318
 319 config MICROCHIP_PHY
 320         tristate "Microchip PHYs"
 321         help
 322           Supports the LAN88XX PHYs.
 323
 324 config MICROSEMI_PHY
 325         tristate "Microsemi PHYs"
 326         ---help---
 327           Currently supports VSC8530, VSC8531, VSC8540 and VSC8541 PHYs
 328
 329 config NATIONAL_PHY
 330         tristate "National Semiconductor PHYs"
 331         ---help---
 332           Currently supports the DP83865 PHY.
 333
 334 config QSEMI_PHY
 335         tristate "Quality Semiconductor PHYs"
 336         ---help---
 337           Currently supports the qs6612
 338
 339 config REALTEK_PHY
 340         tristate "Realtek PHYs"
 341         ---help---
 342           Supports the Realtek 821x PHY.
 343
 344 config SMSC_PHY
 345         tristate "SMSC PHYs"
 346         ---help---
 347           Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
 348
 349 config STE10XP
 350         tristate "STMicroelectronics STe10Xp PHYs"
 351         ---help---
 352           This is the driver for the STe100p and STe101p PHYs.
 353
 354 config TERANETICS_PHY
 355         tristate "Teranetics PHYs"
 356         ---help---
 357           Currently supports the Teranetics TN2020
 358
 359 config VITESSE_PHY
 360         tristate "Vitesse PHYs"
 361         ---help---
 362           Currently supports the vsc8244
 363
 364 config XILINX_GMII2RGMII
 365        tristate "Xilinx GMII2RGMII converter driver"
 366        ---help---
 367          This driver support xilinx GMII to RGMII IP core it provides
 368          the Reduced Gigabit Media Independent Interface(RGMII) between
 369          Ethernet physical media devices and the Gigabit Ethernet controller.
 370
 371 endif # PHYLIB
 372
 373 config MICREL_KS8995MA
 374         tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
 375         depends on SPI