1 /***************************************************************************
3 * Copyright (C) 2004-2008 SMSC
4 * Copyright (C) 2005-2008 ARM
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version 2
9 * of the License, or (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
20 ***************************************************************************
21 * Rewritten, heavily based on smsc911x simple driver by SMSC.
22 * Partly uses io macros from smc91x.c by Nicolas Pitre
25 * LAN9115, LAN9116, LAN9117, LAN9118
26 * LAN9215, LAN9216, LAN9217, LAN9218
32 #include <linux/crc32.h>
33 #include <linux/delay.h>
34 #include <linux/errno.h>
35 #include <linux/etherdevice.h>
36 #include <linux/ethtool.h>
37 #include <linux/init.h>
38 #include <linux/ioport.h>
39 #include <linux/kernel.h>
40 #include <linux/module.h>
41 #include <linux/netdevice.h>
42 #include <linux/platform_device.h>
43 #include <linux/sched.h>
44 #include <linux/timer.h>
45 #include <linux/bug.h>
46 #include <linux/bitops.h>
47 #include <linux/irq.h>
49 #include <linux/swab.h>
50 #include <linux/phy.h>
51 #include <linux/smsc911x.h>
52 #include <linux/device.h>
55 #define SMSC_CHIPNAME "smsc911x"
56 #define SMSC_MDIONAME "smsc911x-mdio"
57 #define SMSC_DRV_VERSION "2008-10-21"
59 MODULE_LICENSE("GPL");
60 MODULE_VERSION(SMSC_DRV_VERSION
);
61 MODULE_ALIAS("platform:smsc911x");
64 static int debug
= 16;
69 module_param(debug
, int, 0);
70 MODULE_PARM_DESC(debug
, "Debug level (0=none,...,16=all)");
72 struct smsc911x_data
{
77 /* used to decide which workarounds apply */
78 unsigned int generation
;
80 /* device configuration (copied from platform_data during probe) */
81 struct smsc911x_platform_config config
;
83 /* This needs to be acquired before calling any of below:
84 * smsc911x_mac_read(), smsc911x_mac_write()
88 /* spinlock to ensure register accesses are serialised */
91 struct phy_device
*phy_dev
;
92 struct mii_bus
*mii_bus
;
93 int phy_irq
[PHY_MAX_ADDR
];
94 unsigned int using_extphy
;
99 unsigned int gpio_setting
;
100 unsigned int gpio_orig_setting
;
101 struct net_device
*dev
;
102 struct napi_struct napi
;
104 unsigned int software_irq_signal
;
106 #ifdef USE_PHY_WORK_AROUND
107 #define MIN_PACKET_SIZE (64)
108 char loopback_tx_pkt
[MIN_PACKET_SIZE
];
109 char loopback_rx_pkt
[MIN_PACKET_SIZE
];
110 unsigned int resetcount
;
113 /* Members for Multicast filter workaround */
114 unsigned int multicast_update_pending
;
115 unsigned int set_bits_mask
;
116 unsigned int clear_bits_mask
;
121 static inline u32
__smsc911x_reg_read(struct smsc911x_data
*pdata
, u32 reg
)
123 if (pdata
->config
.flags
& SMSC911X_USE_32BIT
)
124 return readl(pdata
->ioaddr
+ reg
);
126 if (pdata
->config
.flags
& SMSC911X_USE_16BIT
)
127 return ((readw(pdata
->ioaddr
+ reg
) & 0xFFFF) |
128 ((readw(pdata
->ioaddr
+ reg
+ 2) & 0xFFFF) << 16));
134 static inline u32
smsc911x_reg_read(struct smsc911x_data
*pdata
, u32 reg
)
139 spin_lock_irqsave(&pdata
->dev_lock
, flags
);
140 data
= __smsc911x_reg_read(pdata
, reg
);
141 spin_unlock_irqrestore(&pdata
->dev_lock
, flags
);
146 static inline void __smsc911x_reg_write(struct smsc911x_data
*pdata
, u32 reg
,
149 if (pdata
->config
.flags
& SMSC911X_USE_32BIT
) {
150 writel(val
, pdata
->ioaddr
+ reg
);
154 if (pdata
->config
.flags
& SMSC911X_USE_16BIT
) {
155 writew(val
& 0xFFFF, pdata
->ioaddr
+ reg
);
156 writew((val
>> 16) & 0xFFFF, pdata
->ioaddr
+ reg
+ 2);
163 static inline void smsc911x_reg_write(struct smsc911x_data
*pdata
, u32 reg
,
168 spin_lock_irqsave(&pdata
->dev_lock
, flags
);
169 __smsc911x_reg_write(pdata
, reg
, val
);
170 spin_unlock_irqrestore(&pdata
->dev_lock
, flags
);
173 /* Writes a packet to the TX_DATA_FIFO */
175 smsc911x_tx_writefifo(struct smsc911x_data
*pdata
, unsigned int *buf
,
176 unsigned int wordcount
)
180 spin_lock_irqsave(&pdata
->dev_lock
, flags
);
182 if (pdata
->config
.flags
& SMSC911X_SWAP_FIFO
) {
184 __smsc911x_reg_write(pdata
, TX_DATA_FIFO
,
189 if (pdata
->config
.flags
& SMSC911X_USE_32BIT
) {
190 writesl(pdata
->ioaddr
+ TX_DATA_FIFO
, buf
, wordcount
);
194 if (pdata
->config
.flags
& SMSC911X_USE_16BIT
) {
196 __smsc911x_reg_write(pdata
, TX_DATA_FIFO
, *buf
++);
202 spin_unlock_irqrestore(&pdata
->dev_lock
, flags
);
205 /* Reads a packet out of the RX_DATA_FIFO */
207 smsc911x_rx_readfifo(struct smsc911x_data
*pdata
, unsigned int *buf
,
208 unsigned int wordcount
)
212 spin_lock_irqsave(&pdata
->dev_lock
, flags
);
214 if (pdata
->config
.flags
& SMSC911X_SWAP_FIFO
) {
216 *buf
++ = swab32(__smsc911x_reg_read(pdata
,
221 if (pdata
->config
.flags
& SMSC911X_USE_32BIT
) {
222 readsl(pdata
->ioaddr
+ RX_DATA_FIFO
, buf
, wordcount
);
226 if (pdata
->config
.flags
& SMSC911X_USE_16BIT
) {
228 *buf
++ = __smsc911x_reg_read(pdata
, RX_DATA_FIFO
);
234 spin_unlock_irqrestore(&pdata
->dev_lock
, flags
);
237 /* waits for MAC not busy, with timeout. Only called by smsc911x_mac_read
238 * and smsc911x_mac_write, so assumes mac_lock is held */
239 static int smsc911x_mac_complete(struct smsc911x_data
*pdata
)
244 SMSC_ASSERT_MAC_LOCK(pdata
);
246 for (i
= 0; i
< 40; i
++) {
247 val
= smsc911x_reg_read(pdata
, MAC_CSR_CMD
);
248 if (!(val
& MAC_CSR_CMD_CSR_BUSY_
))
251 SMSC_WARNING(HW
, "Timed out waiting for MAC not BUSY. "
252 "MAC_CSR_CMD: 0x%08X", val
);
256 /* Fetches a MAC register value. Assumes mac_lock is acquired */
257 static u32
smsc911x_mac_read(struct smsc911x_data
*pdata
, unsigned int offset
)
261 SMSC_ASSERT_MAC_LOCK(pdata
);
263 temp
= smsc911x_reg_read(pdata
, MAC_CSR_CMD
);
264 if (unlikely(temp
& MAC_CSR_CMD_CSR_BUSY_
)) {
265 SMSC_WARNING(HW
, "MAC busy at entry");
269 /* Send the MAC cmd */
270 smsc911x_reg_write(pdata
, MAC_CSR_CMD
, ((offset
& 0xFF) |
271 MAC_CSR_CMD_CSR_BUSY_
| MAC_CSR_CMD_R_NOT_W_
));
273 /* Workaround for hardware read-after-write restriction */
274 temp
= smsc911x_reg_read(pdata
, BYTE_TEST
);
276 /* Wait for the read to complete */
277 if (likely(smsc911x_mac_complete(pdata
) == 0))
278 return smsc911x_reg_read(pdata
, MAC_CSR_DATA
);
280 SMSC_WARNING(HW
, "MAC busy after read");
284 /* Set a mac register, mac_lock must be acquired before calling */
285 static void smsc911x_mac_write(struct smsc911x_data
*pdata
,
286 unsigned int offset
, u32 val
)
290 SMSC_ASSERT_MAC_LOCK(pdata
);
292 temp
= smsc911x_reg_read(pdata
, MAC_CSR_CMD
);
293 if (unlikely(temp
& MAC_CSR_CMD_CSR_BUSY_
)) {
295 "smsc911x_mac_write failed, MAC busy at entry");
299 /* Send data to write */
300 smsc911x_reg_write(pdata
, MAC_CSR_DATA
, val
);
302 /* Write the actual data */
303 smsc911x_reg_write(pdata
, MAC_CSR_CMD
, ((offset
& 0xFF) |
304 MAC_CSR_CMD_CSR_BUSY_
));
306 /* Workaround for hardware read-after-write restriction */
307 temp
= smsc911x_reg_read(pdata
, BYTE_TEST
);
309 /* Wait for the write to complete */
310 if (likely(smsc911x_mac_complete(pdata
) == 0))
314 "smsc911x_mac_write failed, MAC busy after write");
317 /* Get a phy register */
318 static int smsc911x_mii_read(struct mii_bus
*bus
, int phyaddr
, int regidx
)
320 struct smsc911x_data
*pdata
= (struct smsc911x_data
*)bus
->priv
;
325 spin_lock_irqsave(&pdata
->mac_lock
, flags
);
327 /* Confirm MII not busy */
328 if (unlikely(smsc911x_mac_read(pdata
, MII_ACC
) & MII_ACC_MII_BUSY_
)) {
330 "MII is busy in smsc911x_mii_read???");
335 /* Set the address, index & direction (read from PHY) */
336 addr
= ((phyaddr
& 0x1F) << 11) | ((regidx
& 0x1F) << 6);
337 smsc911x_mac_write(pdata
, MII_ACC
, addr
);
339 /* Wait for read to complete w/ timeout */
340 for (i
= 0; i
< 100; i
++)
341 if (!(smsc911x_mac_read(pdata
, MII_ACC
) & MII_ACC_MII_BUSY_
)) {
342 reg
= smsc911x_mac_read(pdata
, MII_DATA
);
346 SMSC_WARNING(HW
, "Timed out waiting for MII read to finish");
350 spin_unlock_irqrestore(&pdata
->mac_lock
, flags
);
354 /* Set a phy register */
355 static int smsc911x_mii_write(struct mii_bus
*bus
, int phyaddr
, int regidx
,
358 struct smsc911x_data
*pdata
= (struct smsc911x_data
*)bus
->priv
;
363 spin_lock_irqsave(&pdata
->mac_lock
, flags
);
365 /* Confirm MII not busy */
366 if (unlikely(smsc911x_mac_read(pdata
, MII_ACC
) & MII_ACC_MII_BUSY_
)) {
368 "MII is busy in smsc911x_mii_write???");
373 /* Put the data to write in the MAC */
374 smsc911x_mac_write(pdata
, MII_DATA
, val
);
376 /* Set the address, index & direction (write to PHY) */
377 addr
= ((phyaddr
& 0x1F) << 11) | ((regidx
& 0x1F) << 6) |
379 smsc911x_mac_write(pdata
, MII_ACC
, addr
);
381 /* Wait for write to complete w/ timeout */
382 for (i
= 0; i
< 100; i
++)
383 if (!(smsc911x_mac_read(pdata
, MII_ACC
) & MII_ACC_MII_BUSY_
)) {
388 SMSC_WARNING(HW
, "Timed out waiting for MII write to finish");
392 spin_unlock_irqrestore(&pdata
->mac_lock
, flags
);
396 /* Switch to external phy. Assumes tx and rx are stopped. */
397 static void smsc911x_phy_enable_external(struct smsc911x_data
*pdata
)
399 unsigned int hwcfg
= smsc911x_reg_read(pdata
, HW_CFG
);
401 /* Disable phy clocks to the MAC */
402 hwcfg
&= (~HW_CFG_PHY_CLK_SEL_
);
403 hwcfg
|= HW_CFG_PHY_CLK_SEL_CLK_DIS_
;
404 smsc911x_reg_write(pdata
, HW_CFG
, hwcfg
);
405 udelay(10); /* Enough time for clocks to stop */
407 /* Switch to external phy */
408 hwcfg
|= HW_CFG_EXT_PHY_EN_
;
409 smsc911x_reg_write(pdata
, HW_CFG
, hwcfg
);
411 /* Enable phy clocks to the MAC */
412 hwcfg
&= (~HW_CFG_PHY_CLK_SEL_
);
413 hwcfg
|= HW_CFG_PHY_CLK_SEL_EXT_PHY_
;
414 smsc911x_reg_write(pdata
, HW_CFG
, hwcfg
);
415 udelay(10); /* Enough time for clocks to restart */
417 hwcfg
|= HW_CFG_SMI_SEL_
;
418 smsc911x_reg_write(pdata
, HW_CFG
, hwcfg
);
421 /* Autodetects and enables external phy if present on supported chips.
422 * autodetection can be overridden by specifying SMSC911X_FORCE_INTERNAL_PHY
423 * or SMSC911X_FORCE_EXTERNAL_PHY in the platform_data flags. */
424 static void smsc911x_phy_initialise_external(struct smsc911x_data
*pdata
)
426 unsigned int hwcfg
= smsc911x_reg_read(pdata
, HW_CFG
);
428 if (pdata
->config
.flags
& SMSC911X_FORCE_INTERNAL_PHY
) {
429 SMSC_TRACE(HW
, "Forcing internal PHY");
430 pdata
->using_extphy
= 0;
431 } else if (pdata
->config
.flags
& SMSC911X_FORCE_EXTERNAL_PHY
) {
432 SMSC_TRACE(HW
, "Forcing external PHY");
433 smsc911x_phy_enable_external(pdata
);
434 pdata
->using_extphy
= 1;
435 } else if (hwcfg
& HW_CFG_EXT_PHY_DET_
) {
436 SMSC_TRACE(HW
, "HW_CFG EXT_PHY_DET set, using external PHY");
437 smsc911x_phy_enable_external(pdata
);
438 pdata
->using_extphy
= 1;
440 SMSC_TRACE(HW
, "HW_CFG EXT_PHY_DET clear, using internal PHY");
441 pdata
->using_extphy
= 0;
445 /* Fetches a tx status out of the status fifo */
446 static unsigned int smsc911x_tx_get_txstatus(struct smsc911x_data
*pdata
)
448 unsigned int result
=
449 smsc911x_reg_read(pdata
, TX_FIFO_INF
) & TX_FIFO_INF_TSUSED_
;
452 result
= smsc911x_reg_read(pdata
, TX_STATUS_FIFO
);
457 /* Fetches the next rx status */
458 static unsigned int smsc911x_rx_get_rxstatus(struct smsc911x_data
*pdata
)
460 unsigned int result
=
461 smsc911x_reg_read(pdata
, RX_FIFO_INF
) & RX_FIFO_INF_RXSUSED_
;
464 result
= smsc911x_reg_read(pdata
, RX_STATUS_FIFO
);
469 #ifdef USE_PHY_WORK_AROUND
470 static int smsc911x_phy_check_loopbackpkt(struct smsc911x_data
*pdata
)
477 for (tries
= 0; tries
< 10; tries
++) {
478 unsigned int txcmd_a
;
479 unsigned int txcmd_b
;
481 unsigned int pktlength
;
484 /* Zero-out rx packet memory */
485 memset(pdata
->loopback_rx_pkt
, 0, MIN_PACKET_SIZE
);
487 /* Write tx packet to 118 */
488 txcmd_a
= (u32
)((ulong
)pdata
->loopback_tx_pkt
& 0x03) << 16;
489 txcmd_a
|= TX_CMD_A_FIRST_SEG_
| TX_CMD_A_LAST_SEG_
;
490 txcmd_a
|= MIN_PACKET_SIZE
;
492 txcmd_b
= MIN_PACKET_SIZE
<< 16 | MIN_PACKET_SIZE
;
494 smsc911x_reg_write(pdata
, TX_DATA_FIFO
, txcmd_a
);
495 smsc911x_reg_write(pdata
, TX_DATA_FIFO
, txcmd_b
);
497 bufp
= (ulong
)pdata
->loopback_tx_pkt
& (~0x3);
498 wrsz
= MIN_PACKET_SIZE
+ 3;
499 wrsz
+= (u32
)((ulong
)pdata
->loopback_tx_pkt
& 0x3);
502 smsc911x_tx_writefifo(pdata
, (unsigned int *)bufp
, wrsz
);
504 /* Wait till transmit is done */
508 status
= smsc911x_tx_get_txstatus(pdata
);
509 } while ((i
--) && (!status
));
512 SMSC_WARNING(HW
, "Failed to transmit "
513 "during loopback test");
516 if (status
& TX_STS_ES_
) {
517 SMSC_WARNING(HW
, "Transmit encountered "
518 "errors during loopback test");
522 /* Wait till receive is done */
526 status
= smsc911x_rx_get_rxstatus(pdata
);
527 } while ((i
--) && (!status
));
531 "Failed to receive during loopback test");
534 if (status
& RX_STS_ES_
) {
535 SMSC_WARNING(HW
, "Receive encountered "
536 "errors during loopback test");
540 pktlength
= ((status
& 0x3FFF0000UL
) >> 16);
541 bufp
= (ulong
)pdata
->loopback_rx_pkt
;
542 rdsz
= pktlength
+ 3;
543 rdsz
+= (u32
)((ulong
)pdata
->loopback_rx_pkt
& 0x3);
546 smsc911x_rx_readfifo(pdata
, (unsigned int *)bufp
, rdsz
);
548 if (pktlength
!= (MIN_PACKET_SIZE
+ 4)) {
549 SMSC_WARNING(HW
, "Unexpected packet size "
550 "during loop back test, size=%d, will retry",
555 for (j
= 0; j
< MIN_PACKET_SIZE
; j
++) {
556 if (pdata
->loopback_tx_pkt
[j
]
557 != pdata
->loopback_rx_pkt
[j
]) {
563 SMSC_TRACE(HW
, "Successfully verified "
567 SMSC_WARNING(HW
, "Data mismatch "
568 "during loop back test, will retry");
576 static int smsc911x_phy_reset(struct smsc911x_data
*pdata
)
578 struct phy_device
*phy_dev
= pdata
->phy_dev
;
580 unsigned int i
= 100000;
583 BUG_ON(!phy_dev
->bus
);
585 SMSC_TRACE(HW
, "Performing PHY BCR Reset");
586 smsc911x_mii_write(phy_dev
->bus
, phy_dev
->addr
, MII_BMCR
, BMCR_RESET
);
589 temp
= smsc911x_mii_read(phy_dev
->bus
, phy_dev
->addr
,
591 } while ((i
--) && (temp
& BMCR_RESET
));
593 if (temp
& BMCR_RESET
) {
594 SMSC_WARNING(HW
, "PHY reset failed to complete.");
597 /* Extra delay required because the phy may not be completed with
598 * its reset when BMCR_RESET is cleared. Specs say 256 uS is
599 * enough delay but using 1ms here to be safe */
605 static int smsc911x_phy_loopbacktest(struct net_device
*dev
)
607 struct smsc911x_data
*pdata
= netdev_priv(dev
);
608 struct phy_device
*phy_dev
= pdata
->phy_dev
;
613 /* Initialise tx packet using broadcast destination address */
614 memset(pdata
->loopback_tx_pkt
, 0xff, ETH_ALEN
);
616 /* Use incrementing source address */
617 for (i
= 6; i
< 12; i
++)
618 pdata
->loopback_tx_pkt
[i
] = (char)i
;
620 /* Set length type field */
621 pdata
->loopback_tx_pkt
[12] = 0x00;
622 pdata
->loopback_tx_pkt
[13] = 0x00;
624 for (i
= 14; i
< MIN_PACKET_SIZE
; i
++)
625 pdata
->loopback_tx_pkt
[i
] = (char)i
;
627 val
= smsc911x_reg_read(pdata
, HW_CFG
);
628 val
&= HW_CFG_TX_FIF_SZ_
;
630 smsc911x_reg_write(pdata
, HW_CFG
, val
);
632 smsc911x_reg_write(pdata
, TX_CFG
, TX_CFG_TX_ON_
);
633 smsc911x_reg_write(pdata
, RX_CFG
,
634 (u32
)((ulong
)pdata
->loopback_rx_pkt
& 0x03) << 8);
636 for (i
= 0; i
< 10; i
++) {
637 /* Set PHY to 10/FD, no ANEG, and loopback mode */
638 smsc911x_mii_write(phy_dev
->bus
, phy_dev
->addr
, MII_BMCR
,
639 BMCR_LOOPBACK
| BMCR_FULLDPLX
);
641 /* Enable MAC tx/rx, FD */
642 spin_lock_irqsave(&pdata
->mac_lock
, flags
);
643 smsc911x_mac_write(pdata
, MAC_CR
, MAC_CR_FDPX_
644 | MAC_CR_TXEN_
| MAC_CR_RXEN_
);
645 spin_unlock_irqrestore(&pdata
->mac_lock
, flags
);
647 if (smsc911x_phy_check_loopbackpkt(pdata
) == 0) {
654 spin_lock_irqsave(&pdata
->mac_lock
, flags
);
655 smsc911x_mac_write(pdata
, MAC_CR
, 0);
656 spin_unlock_irqrestore(&pdata
->mac_lock
, flags
);
658 smsc911x_phy_reset(pdata
);
662 spin_lock_irqsave(&pdata
->mac_lock
, flags
);
663 smsc911x_mac_write(pdata
, MAC_CR
, 0);
664 spin_unlock_irqrestore(&pdata
->mac_lock
, flags
);
666 /* Cancel PHY loopback mode */
667 smsc911x_mii_write(phy_dev
->bus
, phy_dev
->addr
, MII_BMCR
, 0);
669 smsc911x_reg_write(pdata
, TX_CFG
, 0);
670 smsc911x_reg_write(pdata
, RX_CFG
, 0);
674 #endif /* USE_PHY_WORK_AROUND */
676 static void smsc911x_phy_update_flowcontrol(struct smsc911x_data
*pdata
)
678 struct phy_device
*phy_dev
= pdata
->phy_dev
;
679 u32 afc
= smsc911x_reg_read(pdata
, AFC_CFG
);
683 if (phy_dev
->duplex
== DUPLEX_FULL
) {
684 u16 lcladv
= phy_read(phy_dev
, MII_ADVERTISE
);
685 u16 rmtadv
= phy_read(phy_dev
, MII_LPA
);
686 u8 cap
= mii_resolve_flowctrl_fdx(lcladv
, rmtadv
);
688 if (cap
& FLOW_CTRL_RX
)
693 if (cap
& FLOW_CTRL_TX
)
698 SMSC_TRACE(HW
, "rx pause %s, tx pause %s",
699 (cap
& FLOW_CTRL_RX
? "enabled" : "disabled"),
700 (cap
& FLOW_CTRL_TX
? "enabled" : "disabled"));
702 SMSC_TRACE(HW
, "half duplex");
707 spin_lock_irqsave(&pdata
->mac_lock
, flags
);
708 smsc911x_mac_write(pdata
, FLOW
, flow
);
709 spin_unlock_irqrestore(&pdata
->mac_lock
, flags
);
711 smsc911x_reg_write(pdata
, AFC_CFG
, afc
);
714 /* Update link mode if anything has changed. Called periodically when the
715 * PHY is in polling mode, even if nothing has changed. */
716 static void smsc911x_phy_adjust_link(struct net_device
*dev
)
718 struct smsc911x_data
*pdata
= netdev_priv(dev
);
719 struct phy_device
*phy_dev
= pdata
->phy_dev
;
723 if (phy_dev
->duplex
!= pdata
->last_duplex
) {
725 SMSC_TRACE(HW
, "duplex state has changed");
727 spin_lock_irqsave(&pdata
->mac_lock
, flags
);
728 mac_cr
= smsc911x_mac_read(pdata
, MAC_CR
);
729 if (phy_dev
->duplex
) {
731 "configuring for full duplex mode");
732 mac_cr
|= MAC_CR_FDPX_
;
735 "configuring for half duplex mode");
736 mac_cr
&= ~MAC_CR_FDPX_
;
738 smsc911x_mac_write(pdata
, MAC_CR
, mac_cr
);
739 spin_unlock_irqrestore(&pdata
->mac_lock
, flags
);
741 smsc911x_phy_update_flowcontrol(pdata
);
742 pdata
->last_duplex
= phy_dev
->duplex
;
745 carrier
= netif_carrier_ok(dev
);
746 if (carrier
!= pdata
->last_carrier
) {
747 SMSC_TRACE(HW
, "carrier state has changed");
749 SMSC_TRACE(HW
, "configuring for carrier OK");
750 if ((pdata
->gpio_orig_setting
& GPIO_CFG_LED1_EN_
) &&
751 (!pdata
->using_extphy
)) {
752 /* Restore original GPIO configuration */
753 pdata
->gpio_setting
= pdata
->gpio_orig_setting
;
754 smsc911x_reg_write(pdata
, GPIO_CFG
,
755 pdata
->gpio_setting
);
758 SMSC_TRACE(HW
, "configuring for no carrier");
759 /* Check global setting that LED1
760 * usage is 10/100 indicator */
761 pdata
->gpio_setting
= smsc911x_reg_read(pdata
,
763 if ((pdata
->gpio_setting
& GPIO_CFG_LED1_EN_
) &&
764 (!pdata
->using_extphy
)) {
765 /* Force 10/100 LED off, after saving
766 * original GPIO configuration */
767 pdata
->gpio_orig_setting
= pdata
->gpio_setting
;
769 pdata
->gpio_setting
&= ~GPIO_CFG_LED1_EN_
;
770 pdata
->gpio_setting
|= (GPIO_CFG_GPIOBUF0_
773 smsc911x_reg_write(pdata
, GPIO_CFG
,
774 pdata
->gpio_setting
);
777 pdata
->last_carrier
= carrier
;
781 static int smsc911x_mii_probe(struct net_device
*dev
)
783 struct smsc911x_data
*pdata
= netdev_priv(dev
);
784 struct phy_device
*phydev
= NULL
;
787 /* find the first phy */
788 phydev
= phy_find_first(pdata
->mii_bus
);
790 pr_err("%s: no PHY found\n", dev
->name
);
794 SMSC_TRACE(PROBE
, "PHY %d: addr %d, phy_id 0x%08X",
795 phy_addr
, phydev
->addr
, phydev
->phy_id
);
797 ret
= phy_connect_direct(dev
, phydev
,
798 &smsc911x_phy_adjust_link
, 0,
799 pdata
->config
.phy_interface
);
802 pr_err("%s: Could not attach to PHY\n", dev
->name
);
806 pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
807 dev
->name
, phydev
->drv
->name
,
808 dev_name(&phydev
->dev
), phydev
->irq
);
810 /* mask with MAC supported features */
811 phydev
->supported
&= (PHY_BASIC_FEATURES
| SUPPORTED_Pause
|
812 SUPPORTED_Asym_Pause
);
813 phydev
->advertising
= phydev
->supported
;
815 pdata
->phy_dev
= phydev
;
816 pdata
->last_duplex
= -1;
817 pdata
->last_carrier
= -1;
819 #ifdef USE_PHY_WORK_AROUND
820 if (smsc911x_phy_loopbacktest(dev
) < 0) {
821 SMSC_WARNING(HW
, "Failed Loop Back Test");
824 SMSC_TRACE(HW
, "Passed Loop Back Test");
825 #endif /* USE_PHY_WORK_AROUND */
827 SMSC_TRACE(HW
, "phy initialised successfully");
831 static int __devinit
smsc911x_mii_init(struct platform_device
*pdev
,
832 struct net_device
*dev
)
834 struct smsc911x_data
*pdata
= netdev_priv(dev
);
837 pdata
->mii_bus
= mdiobus_alloc();
838 if (!pdata
->mii_bus
) {
843 pdata
->mii_bus
->name
= SMSC_MDIONAME
;
844 snprintf(pdata
->mii_bus
->id
, MII_BUS_ID_SIZE
, "%x", pdev
->id
);
845 pdata
->mii_bus
->priv
= pdata
;
846 pdata
->mii_bus
->read
= smsc911x_mii_read
;
847 pdata
->mii_bus
->write
= smsc911x_mii_write
;
848 pdata
->mii_bus
->irq
= pdata
->phy_irq
;
849 for (i
= 0; i
< PHY_MAX_ADDR
; ++i
)
850 pdata
->mii_bus
->irq
[i
] = PHY_POLL
;
852 pdata
->mii_bus
->parent
= &pdev
->dev
;
854 switch (pdata
->idrev
& 0xFFFF0000) {
859 /* External PHY supported, try to autodetect */
860 smsc911x_phy_initialise_external(pdata
);
863 SMSC_TRACE(HW
, "External PHY is not supported, "
864 "using internal PHY");
865 pdata
->using_extphy
= 0;
869 if (!pdata
->using_extphy
) {
870 /* Mask all PHYs except ID 1 (internal) */
871 pdata
->mii_bus
->phy_mask
= ~(1 << 1);
874 if (mdiobus_register(pdata
->mii_bus
)) {
875 SMSC_WARNING(PROBE
, "Error registering mii bus");
876 goto err_out_free_bus_2
;
879 if (smsc911x_mii_probe(dev
) < 0) {
880 SMSC_WARNING(PROBE
, "Error registering mii bus");
881 goto err_out_unregister_bus_3
;
886 err_out_unregister_bus_3
:
887 mdiobus_unregister(pdata
->mii_bus
);
889 mdiobus_free(pdata
->mii_bus
);
894 /* Gets the number of tx statuses in the fifo */
895 static unsigned int smsc911x_tx_get_txstatcount(struct smsc911x_data
*pdata
)
897 return (smsc911x_reg_read(pdata
, TX_FIFO_INF
)
898 & TX_FIFO_INF_TSUSED_
) >> 16;
901 /* Reads tx statuses and increments counters where necessary */
902 static void smsc911x_tx_update_txcounters(struct net_device
*dev
)
904 struct smsc911x_data
*pdata
= netdev_priv(dev
);
905 unsigned int tx_stat
;
907 while ((tx_stat
= smsc911x_tx_get_txstatus(pdata
)) != 0) {
908 if (unlikely(tx_stat
& 0x80000000)) {
909 /* In this driver the packet tag is used as the packet
910 * length. Since a packet length can never reach the
911 * size of 0x8000, this bit is reserved. It is worth
912 * noting that the "reserved bit" in the warning above
913 * does not reference a hardware defined reserved bit
914 * but rather a driver defined one.
917 "Packet tag reserved bit is high");
919 if (unlikely(tx_stat
& TX_STS_ES_
)) {
920 dev
->stats
.tx_errors
++;
922 dev
->stats
.tx_packets
++;
923 dev
->stats
.tx_bytes
+= (tx_stat
>> 16);
925 if (unlikely(tx_stat
& TX_STS_EXCESS_COL_
)) {
926 dev
->stats
.collisions
+= 16;
927 dev
->stats
.tx_aborted_errors
+= 1;
929 dev
->stats
.collisions
+=
930 ((tx_stat
>> 3) & 0xF);
932 if (unlikely(tx_stat
& TX_STS_LOST_CARRIER_
))
933 dev
->stats
.tx_carrier_errors
+= 1;
934 if (unlikely(tx_stat
& TX_STS_LATE_COL_
)) {
935 dev
->stats
.collisions
++;
936 dev
->stats
.tx_aborted_errors
++;
942 /* Increments the Rx error counters */
944 smsc911x_rx_counterrors(struct net_device
*dev
, unsigned int rxstat
)
948 if (unlikely(rxstat
& RX_STS_ES_
)) {
949 dev
->stats
.rx_errors
++;
950 if (unlikely(rxstat
& RX_STS_CRC_ERR_
)) {
951 dev
->stats
.rx_crc_errors
++;
955 if (likely(!crc_err
)) {
956 if (unlikely((rxstat
& RX_STS_FRAME_TYPE_
) &&
957 (rxstat
& RX_STS_LENGTH_ERR_
)))
958 dev
->stats
.rx_length_errors
++;
959 if (rxstat
& RX_STS_MCAST_
)
960 dev
->stats
.multicast
++;
964 /* Quickly dumps bad packets */
966 smsc911x_rx_fastforward(struct smsc911x_data
*pdata
, unsigned int pktbytes
)
968 unsigned int pktwords
= (pktbytes
+ NET_IP_ALIGN
+ 3) >> 2;
970 if (likely(pktwords
>= 4)) {
971 unsigned int timeout
= 500;
973 smsc911x_reg_write(pdata
, RX_DP_CTRL
, RX_DP_CTRL_RX_FFWD_
);
976 val
= smsc911x_reg_read(pdata
, RX_DP_CTRL
);
977 } while ((val
& RX_DP_CTRL_RX_FFWD_
) && --timeout
);
979 if (unlikely(timeout
== 0))
980 SMSC_WARNING(HW
, "Timed out waiting for "
981 "RX FFWD to finish, RX_DP_CTRL: 0x%08X", val
);
985 temp
= smsc911x_reg_read(pdata
, RX_DATA_FIFO
);
989 /* NAPI poll function */
990 static int smsc911x_poll(struct napi_struct
*napi
, int budget
)
992 struct smsc911x_data
*pdata
=
993 container_of(napi
, struct smsc911x_data
, napi
);
994 struct net_device
*dev
= pdata
->dev
;
997 while (npackets
< budget
) {
998 unsigned int pktlength
;
999 unsigned int pktwords
;
1000 struct sk_buff
*skb
;
1001 unsigned int rxstat
= smsc911x_rx_get_rxstatus(pdata
);
1005 /* We processed all packets available. Tell NAPI it can
1006 * stop polling then re-enable rx interrupts */
1007 smsc911x_reg_write(pdata
, INT_STS
, INT_STS_RSFL_
);
1008 napi_complete(napi
);
1009 temp
= smsc911x_reg_read(pdata
, INT_EN
);
1010 temp
|= INT_EN_RSFL_EN_
;
1011 smsc911x_reg_write(pdata
, INT_EN
, temp
);
1015 /* Count packet for NAPI scheduling, even if it has an error.
1016 * Error packets still require cycles to discard */
1019 pktlength
= ((rxstat
& 0x3FFF0000) >> 16);
1020 pktwords
= (pktlength
+ NET_IP_ALIGN
+ 3) >> 2;
1021 smsc911x_rx_counterrors(dev
, rxstat
);
1023 if (unlikely(rxstat
& RX_STS_ES_
)) {
1024 SMSC_WARNING(RX_ERR
,
1025 "Discarding packet with error bit set");
1026 /* Packet has an error, discard it and continue with
1028 smsc911x_rx_fastforward(pdata
, pktwords
);
1029 dev
->stats
.rx_dropped
++;
1033 skb
= netdev_alloc_skb(dev
, pktlength
+ NET_IP_ALIGN
);
1034 if (unlikely(!skb
)) {
1035 SMSC_WARNING(RX_ERR
,
1036 "Unable to allocate skb for rx packet");
1037 /* Drop the packet and stop this polling iteration */
1038 smsc911x_rx_fastforward(pdata
, pktwords
);
1039 dev
->stats
.rx_dropped
++;
1043 skb
->data
= skb
->head
;
1044 skb_reset_tail_pointer(skb
);
1046 /* Align IP on 16B boundary */
1047 skb_reserve(skb
, NET_IP_ALIGN
);
1048 skb_put(skb
, pktlength
- 4);
1049 smsc911x_rx_readfifo(pdata
, (unsigned int *)skb
->head
,
1051 skb
->protocol
= eth_type_trans(skb
, dev
);
1052 skb_checksum_none_assert(skb
);
1053 netif_receive_skb(skb
);
1055 /* Update counters */
1056 dev
->stats
.rx_packets
++;
1057 dev
->stats
.rx_bytes
+= (pktlength
- 4);
1060 /* Return total received packets */
1064 /* Returns hash bit number for given MAC address
1066 * 01 00 5E 00 00 01 -> returns bit number 31 */
1067 static unsigned int smsc911x_hash(char addr
[ETH_ALEN
])
1069 return (ether_crc(ETH_ALEN
, addr
) >> 26) & 0x3f;
1072 static void smsc911x_rx_multicast_update(struct smsc911x_data
*pdata
)
1074 /* Performs the multicast & mac_cr update. This is called when
1075 * safe on the current hardware, and with the mac_lock held */
1076 unsigned int mac_cr
;
1078 SMSC_ASSERT_MAC_LOCK(pdata
);
1080 mac_cr
= smsc911x_mac_read(pdata
, MAC_CR
);
1081 mac_cr
|= pdata
->set_bits_mask
;
1082 mac_cr
&= ~(pdata
->clear_bits_mask
);
1083 smsc911x_mac_write(pdata
, MAC_CR
, mac_cr
);
1084 smsc911x_mac_write(pdata
, HASHH
, pdata
->hashhi
);
1085 smsc911x_mac_write(pdata
, HASHL
, pdata
->hashlo
);
1086 SMSC_TRACE(HW
, "maccr 0x%08X, HASHH 0x%08X, HASHL 0x%08X",
1087 mac_cr
, pdata
->hashhi
, pdata
->hashlo
);
1090 static void smsc911x_rx_multicast_update_workaround(struct smsc911x_data
*pdata
)
1092 unsigned int mac_cr
;
1094 /* This function is only called for older LAN911x devices
1095 * (revA or revB), where MAC_CR, HASHH and HASHL should not
1096 * be modified during Rx - newer devices immediately update the
1099 * This is called from interrupt context */
1101 spin_lock(&pdata
->mac_lock
);
1103 /* Check Rx has stopped */
1104 if (smsc911x_mac_read(pdata
, MAC_CR
) & MAC_CR_RXEN_
)
1105 SMSC_WARNING(DRV
, "Rx not stopped");
1107 /* Perform the update - safe to do now Rx has stopped */
1108 smsc911x_rx_multicast_update(pdata
);
1111 mac_cr
= smsc911x_mac_read(pdata
, MAC_CR
);
1112 mac_cr
|= MAC_CR_RXEN_
;
1113 smsc911x_mac_write(pdata
, MAC_CR
, mac_cr
);
1115 pdata
->multicast_update_pending
= 0;
1117 spin_unlock(&pdata
->mac_lock
);
1120 static int smsc911x_soft_reset(struct smsc911x_data
*pdata
)
1122 unsigned int timeout
;
1125 /* Reset the LAN911x */
1126 smsc911x_reg_write(pdata
, HW_CFG
, HW_CFG_SRST_
);
1130 temp
= smsc911x_reg_read(pdata
, HW_CFG
);
1131 } while ((--timeout
) && (temp
& HW_CFG_SRST_
));
1133 if (unlikely(temp
& HW_CFG_SRST_
)) {
1134 SMSC_WARNING(DRV
, "Failed to complete reset");
1140 /* Sets the device MAC address to dev_addr, called with mac_lock held */
1142 smsc911x_set_hw_mac_address(struct smsc911x_data
*pdata
, u8 dev_addr
[6])
1144 u32 mac_high16
= (dev_addr
[5] << 8) | dev_addr
[4];
1145 u32 mac_low32
= (dev_addr
[3] << 24) | (dev_addr
[2] << 16) |
1146 (dev_addr
[1] << 8) | dev_addr
[0];
1148 SMSC_ASSERT_MAC_LOCK(pdata
);
1150 smsc911x_mac_write(pdata
, ADDRH
, mac_high16
);
1151 smsc911x_mac_write(pdata
, ADDRL
, mac_low32
);
1154 static int smsc911x_open(struct net_device
*dev
)
1156 struct smsc911x_data
*pdata
= netdev_priv(dev
);
1157 unsigned int timeout
;
1159 unsigned int intcfg
;
1161 /* if the phy is not yet registered, retry later*/
1162 if (!pdata
->phy_dev
) {
1163 SMSC_WARNING(HW
, "phy_dev is NULL");
1167 if (!is_valid_ether_addr(dev
->dev_addr
)) {
1168 SMSC_WARNING(HW
, "dev_addr is not a valid MAC address");
1169 return -EADDRNOTAVAIL
;
1172 /* Reset the LAN911x */
1173 if (smsc911x_soft_reset(pdata
)) {
1174 SMSC_WARNING(HW
, "soft reset failed");
1178 smsc911x_reg_write(pdata
, HW_CFG
, 0x00050000);
1179 smsc911x_reg_write(pdata
, AFC_CFG
, 0x006E3740);
1181 /* Increase the legal frame size of VLAN tagged frames to 1522 bytes */
1182 spin_lock_irq(&pdata
->mac_lock
);
1183 smsc911x_mac_write(pdata
, VLAN1
, ETH_P_8021Q
);
1184 spin_unlock_irq(&pdata
->mac_lock
);
1186 /* Make sure EEPROM has finished loading before setting GPIO_CFG */
1188 while ((smsc911x_reg_read(pdata
, E2P_CMD
) & E2P_CMD_EPC_BUSY_
) &&
1193 if (unlikely(timeout
== 0))
1195 "Timed out waiting for EEPROM busy bit to clear");
1197 smsc911x_reg_write(pdata
, GPIO_CFG
, 0x70070000);
1199 /* The soft reset above cleared the device's MAC address,
1200 * restore it from local copy (set in probe) */
1201 spin_lock_irq(&pdata
->mac_lock
);
1202 smsc911x_set_hw_mac_address(pdata
, dev
->dev_addr
);
1203 spin_unlock_irq(&pdata
->mac_lock
);
1205 /* Initialise irqs, but leave all sources disabled */
1206 smsc911x_reg_write(pdata
, INT_EN
, 0);
1207 smsc911x_reg_write(pdata
, INT_STS
, 0xFFFFFFFF);
1209 /* Set interrupt deassertion to 100uS */
1210 intcfg
= ((10 << 24) | INT_CFG_IRQ_EN_
);
1212 if (pdata
->config
.irq_polarity
) {
1213 SMSC_TRACE(IFUP
, "irq polarity: active high");
1214 intcfg
|= INT_CFG_IRQ_POL_
;
1216 SMSC_TRACE(IFUP
, "irq polarity: active low");
1219 if (pdata
->config
.irq_type
) {
1220 SMSC_TRACE(IFUP
, "irq type: push-pull");
1221 intcfg
|= INT_CFG_IRQ_TYPE_
;
1223 SMSC_TRACE(IFUP
, "irq type: open drain");
1226 smsc911x_reg_write(pdata
, INT_CFG
, intcfg
);
1228 SMSC_TRACE(IFUP
, "Testing irq handler using IRQ %d", dev
->irq
);
1229 pdata
->software_irq_signal
= 0;
1232 temp
= smsc911x_reg_read(pdata
, INT_EN
);
1233 temp
|= INT_EN_SW_INT_EN_
;
1234 smsc911x_reg_write(pdata
, INT_EN
, temp
);
1238 if (pdata
->software_irq_signal
)
1243 if (!pdata
->software_irq_signal
) {
1244 dev_warn(&dev
->dev
, "ISR failed signaling test (IRQ %d)\n",
1248 SMSC_TRACE(IFUP
, "IRQ handler passed test using IRQ %d", dev
->irq
);
1250 dev_info(&dev
->dev
, "SMSC911x/921x identified at %#08lx, IRQ: %d\n",
1251 (unsigned long)pdata
->ioaddr
, dev
->irq
);
1253 /* Reset the last known duplex and carrier */
1254 pdata
->last_duplex
= -1;
1255 pdata
->last_carrier
= -1;
1257 /* Bring the PHY up */
1258 phy_start(pdata
->phy_dev
);
1260 temp
= smsc911x_reg_read(pdata
, HW_CFG
);
1261 /* Preserve TX FIFO size and external PHY configuration */
1262 temp
&= (HW_CFG_TX_FIF_SZ_
|0x00000FFF);
1264 smsc911x_reg_write(pdata
, HW_CFG
, temp
);
1266 temp
= smsc911x_reg_read(pdata
, FIFO_INT
);
1267 temp
|= FIFO_INT_TX_AVAIL_LEVEL_
;
1268 temp
&= ~(FIFO_INT_RX_STS_LEVEL_
);
1269 smsc911x_reg_write(pdata
, FIFO_INT
, temp
);
1271 /* set RX Data offset to 2 bytes for alignment */
1272 smsc911x_reg_write(pdata
, RX_CFG
, (2 << 8));
1274 /* enable NAPI polling before enabling RX interrupts */
1275 napi_enable(&pdata
->napi
);
1277 temp
= smsc911x_reg_read(pdata
, INT_EN
);
1278 temp
|= (INT_EN_TDFA_EN_
| INT_EN_RSFL_EN_
| INT_EN_RXSTOP_INT_EN_
);
1279 smsc911x_reg_write(pdata
, INT_EN
, temp
);
1281 spin_lock_irq(&pdata
->mac_lock
);
1282 temp
= smsc911x_mac_read(pdata
, MAC_CR
);
1283 temp
|= (MAC_CR_TXEN_
| MAC_CR_RXEN_
| MAC_CR_HBDIS_
);
1284 smsc911x_mac_write(pdata
, MAC_CR
, temp
);
1285 spin_unlock_irq(&pdata
->mac_lock
);
1287 smsc911x_reg_write(pdata
, TX_CFG
, TX_CFG_TX_ON_
);
1289 netif_start_queue(dev
);
1293 /* Entry point for stopping the interface */
1294 static int smsc911x_stop(struct net_device
*dev
)
1296 struct smsc911x_data
*pdata
= netdev_priv(dev
);
1299 /* Disable all device interrupts */
1300 temp
= smsc911x_reg_read(pdata
, INT_CFG
);
1301 temp
&= ~INT_CFG_IRQ_EN_
;
1302 smsc911x_reg_write(pdata
, INT_CFG
, temp
);
1304 /* Stop Tx and Rx polling */
1305 netif_stop_queue(dev
);
1306 napi_disable(&pdata
->napi
);
1308 /* At this point all Rx and Tx activity is stopped */
1309 dev
->stats
.rx_dropped
+= smsc911x_reg_read(pdata
, RX_DROP
);
1310 smsc911x_tx_update_txcounters(dev
);
1312 /* Bring the PHY down */
1314 phy_stop(pdata
->phy_dev
);
1316 SMSC_TRACE(IFDOWN
, "Interface stopped");
1320 /* Entry point for transmitting a packet */
1321 static int smsc911x_hard_start_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
1323 struct smsc911x_data
*pdata
= netdev_priv(dev
);
1324 unsigned int freespace
;
1325 unsigned int tx_cmd_a
;
1326 unsigned int tx_cmd_b
;
1331 freespace
= smsc911x_reg_read(pdata
, TX_FIFO_INF
) & TX_FIFO_INF_TDFREE_
;
1333 if (unlikely(freespace
< TX_FIFO_LOW_THRESHOLD
))
1334 SMSC_WARNING(TX_ERR
,
1335 "Tx data fifo low, space available: %d", freespace
);
1337 /* Word alignment adjustment */
1338 tx_cmd_a
= (u32
)((ulong
)skb
->data
& 0x03) << 16;
1339 tx_cmd_a
|= TX_CMD_A_FIRST_SEG_
| TX_CMD_A_LAST_SEG_
;
1340 tx_cmd_a
|= (unsigned int)skb
->len
;
1342 tx_cmd_b
= ((unsigned int)skb
->len
) << 16;
1343 tx_cmd_b
|= (unsigned int)skb
->len
;
1345 smsc911x_reg_write(pdata
, TX_DATA_FIFO
, tx_cmd_a
);
1346 smsc911x_reg_write(pdata
, TX_DATA_FIFO
, tx_cmd_b
);
1348 bufp
= (ulong
)skb
->data
& (~0x3);
1349 wrsz
= (u32
)skb
->len
+ 3;
1350 wrsz
+= (u32
)((ulong
)skb
->data
& 0x3);
1353 smsc911x_tx_writefifo(pdata
, (unsigned int *)bufp
, wrsz
);
1354 freespace
-= (skb
->len
+ 32);
1357 if (unlikely(smsc911x_tx_get_txstatcount(pdata
) >= 30))
1358 smsc911x_tx_update_txcounters(dev
);
1360 if (freespace
< TX_FIFO_LOW_THRESHOLD
) {
1361 netif_stop_queue(dev
);
1362 temp
= smsc911x_reg_read(pdata
, FIFO_INT
);
1365 smsc911x_reg_write(pdata
, FIFO_INT
, temp
);
1368 return NETDEV_TX_OK
;
1371 /* Entry point for getting status counters */
1372 static struct net_device_stats
*smsc911x_get_stats(struct net_device
*dev
)
1374 struct smsc911x_data
*pdata
= netdev_priv(dev
);
1375 smsc911x_tx_update_txcounters(dev
);
1376 dev
->stats
.rx_dropped
+= smsc911x_reg_read(pdata
, RX_DROP
);
1380 /* Entry point for setting addressing modes */
1381 static void smsc911x_set_multicast_list(struct net_device
*dev
)
1383 struct smsc911x_data
*pdata
= netdev_priv(dev
);
1384 unsigned long flags
;
1386 if (dev
->flags
& IFF_PROMISC
) {
1387 /* Enabling promiscuous mode */
1388 pdata
->set_bits_mask
= MAC_CR_PRMS_
;
1389 pdata
->clear_bits_mask
= (MAC_CR_MCPAS_
| MAC_CR_HPFILT_
);
1392 } else if (dev
->flags
& IFF_ALLMULTI
) {
1393 /* Enabling all multicast mode */
1394 pdata
->set_bits_mask
= MAC_CR_MCPAS_
;
1395 pdata
->clear_bits_mask
= (MAC_CR_PRMS_
| MAC_CR_HPFILT_
);
1398 } else if (!netdev_mc_empty(dev
)) {
1399 /* Enabling specific multicast addresses */
1400 unsigned int hash_high
= 0;
1401 unsigned int hash_low
= 0;
1402 struct netdev_hw_addr
*ha
;
1404 pdata
->set_bits_mask
= MAC_CR_HPFILT_
;
1405 pdata
->clear_bits_mask
= (MAC_CR_PRMS_
| MAC_CR_MCPAS_
);
1407 netdev_for_each_mc_addr(ha
, dev
) {
1408 unsigned int bitnum
= smsc911x_hash(ha
->addr
);
1409 unsigned int mask
= 0x01 << (bitnum
& 0x1F);
1417 pdata
->hashhi
= hash_high
;
1418 pdata
->hashlo
= hash_low
;
1420 /* Enabling local MAC address only */
1421 pdata
->set_bits_mask
= 0;
1422 pdata
->clear_bits_mask
=
1423 (MAC_CR_PRMS_
| MAC_CR_MCPAS_
| MAC_CR_HPFILT_
);
1428 spin_lock_irqsave(&pdata
->mac_lock
, flags
);
1430 if (pdata
->generation
<= 1) {
1431 /* Older hardware revision - cannot change these flags while
1433 if (!pdata
->multicast_update_pending
) {
1435 SMSC_TRACE(HW
, "scheduling mcast update");
1436 pdata
->multicast_update_pending
= 1;
1438 /* Request the hardware to stop, then perform the
1439 * update when we get an RX_STOP interrupt */
1440 temp
= smsc911x_mac_read(pdata
, MAC_CR
);
1441 temp
&= ~(MAC_CR_RXEN_
);
1442 smsc911x_mac_write(pdata
, MAC_CR
, temp
);
1444 /* There is another update pending, this should now
1445 * use the newer values */
1448 /* Newer hardware revision - can write immediately */
1449 smsc911x_rx_multicast_update(pdata
);
1452 spin_unlock_irqrestore(&pdata
->mac_lock
, flags
);
1455 static irqreturn_t
smsc911x_irqhandler(int irq
, void *dev_id
)
1457 struct net_device
*dev
= dev_id
;
1458 struct smsc911x_data
*pdata
= netdev_priv(dev
);
1459 u32 intsts
= smsc911x_reg_read(pdata
, INT_STS
);
1460 u32 inten
= smsc911x_reg_read(pdata
, INT_EN
);
1461 int serviced
= IRQ_NONE
;
1464 if (unlikely(intsts
& inten
& INT_STS_SW_INT_
)) {
1465 temp
= smsc911x_reg_read(pdata
, INT_EN
);
1466 temp
&= (~INT_EN_SW_INT_EN_
);
1467 smsc911x_reg_write(pdata
, INT_EN
, temp
);
1468 smsc911x_reg_write(pdata
, INT_STS
, INT_STS_SW_INT_
);
1469 pdata
->software_irq_signal
= 1;
1471 serviced
= IRQ_HANDLED
;
1474 if (unlikely(intsts
& inten
& INT_STS_RXSTOP_INT_
)) {
1475 /* Called when there is a multicast update scheduled and
1476 * it is now safe to complete the update */
1477 SMSC_TRACE(INTR
, "RX Stop interrupt");
1478 smsc911x_reg_write(pdata
, INT_STS
, INT_STS_RXSTOP_INT_
);
1479 if (pdata
->multicast_update_pending
)
1480 smsc911x_rx_multicast_update_workaround(pdata
);
1481 serviced
= IRQ_HANDLED
;
1484 if (intsts
& inten
& INT_STS_TDFA_
) {
1485 temp
= smsc911x_reg_read(pdata
, FIFO_INT
);
1486 temp
|= FIFO_INT_TX_AVAIL_LEVEL_
;
1487 smsc911x_reg_write(pdata
, FIFO_INT
, temp
);
1488 smsc911x_reg_write(pdata
, INT_STS
, INT_STS_TDFA_
);
1489 netif_wake_queue(dev
);
1490 serviced
= IRQ_HANDLED
;
1493 if (unlikely(intsts
& inten
& INT_STS_RXE_
)) {
1494 SMSC_TRACE(INTR
, "RX Error interrupt");
1495 smsc911x_reg_write(pdata
, INT_STS
, INT_STS_RXE_
);
1496 serviced
= IRQ_HANDLED
;
1499 if (likely(intsts
& inten
& INT_STS_RSFL_
)) {
1500 if (likely(napi_schedule_prep(&pdata
->napi
))) {
1501 /* Disable Rx interrupts */
1502 temp
= smsc911x_reg_read(pdata
, INT_EN
);
1503 temp
&= (~INT_EN_RSFL_EN_
);
1504 smsc911x_reg_write(pdata
, INT_EN
, temp
);
1505 /* Schedule a NAPI poll */
1506 __napi_schedule(&pdata
->napi
);
1508 SMSC_WARNING(RX_ERR
,
1509 "napi_schedule_prep failed");
1511 serviced
= IRQ_HANDLED
;
1517 #ifdef CONFIG_NET_POLL_CONTROLLER
1518 static void smsc911x_poll_controller(struct net_device
*dev
)
1520 disable_irq(dev
->irq
);
1521 smsc911x_irqhandler(0, dev
);
1522 enable_irq(dev
->irq
);
1524 #endif /* CONFIG_NET_POLL_CONTROLLER */
1526 static int smsc911x_set_mac_address(struct net_device
*dev
, void *p
)
1528 struct smsc911x_data
*pdata
= netdev_priv(dev
);
1529 struct sockaddr
*addr
= p
;
1531 /* On older hardware revisions we cannot change the mac address
1532 * registers while receiving data. Newer devices can safely change
1533 * this at any time. */
1534 if (pdata
->generation
<= 1 && netif_running(dev
))
1537 if (!is_valid_ether_addr(addr
->sa_data
))
1538 return -EADDRNOTAVAIL
;
1540 memcpy(dev
->dev_addr
, addr
->sa_data
, ETH_ALEN
);
1542 spin_lock_irq(&pdata
->mac_lock
);
1543 smsc911x_set_hw_mac_address(pdata
, dev
->dev_addr
);
1544 spin_unlock_irq(&pdata
->mac_lock
);
1546 dev_info(&dev
->dev
, "MAC Address: %pM\n", dev
->dev_addr
);
1551 /* Standard ioctls for mii-tool */
1552 static int smsc911x_do_ioctl(struct net_device
*dev
, struct ifreq
*ifr
, int cmd
)
1554 struct smsc911x_data
*pdata
= netdev_priv(dev
);
1556 if (!netif_running(dev
) || !pdata
->phy_dev
)
1559 return phy_mii_ioctl(pdata
->phy_dev
, ifr
, cmd
);
1563 smsc911x_ethtool_getsettings(struct net_device
*dev
, struct ethtool_cmd
*cmd
)
1565 struct smsc911x_data
*pdata
= netdev_priv(dev
);
1569 return phy_ethtool_gset(pdata
->phy_dev
, cmd
);
1573 smsc911x_ethtool_setsettings(struct net_device
*dev
, struct ethtool_cmd
*cmd
)
1575 struct smsc911x_data
*pdata
= netdev_priv(dev
);
1577 return phy_ethtool_sset(pdata
->phy_dev
, cmd
);
1580 static void smsc911x_ethtool_getdrvinfo(struct net_device
*dev
,
1581 struct ethtool_drvinfo
*info
)
1583 strlcpy(info
->driver
, SMSC_CHIPNAME
, sizeof(info
->driver
));
1584 strlcpy(info
->version
, SMSC_DRV_VERSION
, sizeof(info
->version
));
1585 strlcpy(info
->bus_info
, dev_name(dev
->dev
.parent
),
1586 sizeof(info
->bus_info
));
1589 static int smsc911x_ethtool_nwayreset(struct net_device
*dev
)
1591 struct smsc911x_data
*pdata
= netdev_priv(dev
);
1593 return phy_start_aneg(pdata
->phy_dev
);
1596 static u32
smsc911x_ethtool_getmsglevel(struct net_device
*dev
)
1598 struct smsc911x_data
*pdata
= netdev_priv(dev
);
1599 return pdata
->msg_enable
;
1602 static void smsc911x_ethtool_setmsglevel(struct net_device
*dev
, u32 level
)
1604 struct smsc911x_data
*pdata
= netdev_priv(dev
);
1605 pdata
->msg_enable
= level
;
1608 static int smsc911x_ethtool_getregslen(struct net_device
*dev
)
1610 return (((E2P_DATA
- ID_REV
) / 4 + 1) + (WUCSR
- MAC_CR
) + 1 + 32) *
1615 smsc911x_ethtool_getregs(struct net_device
*dev
, struct ethtool_regs
*regs
,
1618 struct smsc911x_data
*pdata
= netdev_priv(dev
);
1619 struct phy_device
*phy_dev
= pdata
->phy_dev
;
1620 unsigned long flags
;
1625 regs
->version
= pdata
->idrev
;
1626 for (i
= ID_REV
; i
<= E2P_DATA
; i
+= (sizeof(u32
)))
1627 data
[j
++] = smsc911x_reg_read(pdata
, i
);
1629 for (i
= MAC_CR
; i
<= WUCSR
; i
++) {
1630 spin_lock_irqsave(&pdata
->mac_lock
, flags
);
1631 data
[j
++] = smsc911x_mac_read(pdata
, i
);
1632 spin_unlock_irqrestore(&pdata
->mac_lock
, flags
);
1635 for (i
= 0; i
<= 31; i
++)
1636 data
[j
++] = smsc911x_mii_read(phy_dev
->bus
, phy_dev
->addr
, i
);
1639 static void smsc911x_eeprom_enable_access(struct smsc911x_data
*pdata
)
1641 unsigned int temp
= smsc911x_reg_read(pdata
, GPIO_CFG
);
1642 temp
&= ~GPIO_CFG_EEPR_EN_
;
1643 smsc911x_reg_write(pdata
, GPIO_CFG
, temp
);
1647 static int smsc911x_eeprom_send_cmd(struct smsc911x_data
*pdata
, u32 op
)
1652 SMSC_TRACE(DRV
, "op 0x%08x", op
);
1653 if (smsc911x_reg_read(pdata
, E2P_CMD
) & E2P_CMD_EPC_BUSY_
) {
1654 SMSC_WARNING(DRV
, "Busy at start");
1658 e2cmd
= op
| E2P_CMD_EPC_BUSY_
;
1659 smsc911x_reg_write(pdata
, E2P_CMD
, e2cmd
);
1663 e2cmd
= smsc911x_reg_read(pdata
, E2P_CMD
);
1664 } while ((e2cmd
& E2P_CMD_EPC_BUSY_
) && (--timeout
));
1667 SMSC_TRACE(DRV
, "TIMED OUT");
1671 if (e2cmd
& E2P_CMD_EPC_TIMEOUT_
) {
1672 SMSC_TRACE(DRV
, "Error occured during eeprom operation");
1679 static int smsc911x_eeprom_read_location(struct smsc911x_data
*pdata
,
1680 u8 address
, u8
*data
)
1682 u32 op
= E2P_CMD_EPC_CMD_READ_
| address
;
1685 SMSC_TRACE(DRV
, "address 0x%x", address
);
1686 ret
= smsc911x_eeprom_send_cmd(pdata
, op
);
1689 data
[address
] = smsc911x_reg_read(pdata
, E2P_DATA
);
1694 static int smsc911x_eeprom_write_location(struct smsc911x_data
*pdata
,
1695 u8 address
, u8 data
)
1697 u32 op
= E2P_CMD_EPC_CMD_ERASE_
| address
;
1701 SMSC_TRACE(DRV
, "address 0x%x, data 0x%x", address
, data
);
1702 ret
= smsc911x_eeprom_send_cmd(pdata
, op
);
1705 op
= E2P_CMD_EPC_CMD_WRITE_
| address
;
1706 smsc911x_reg_write(pdata
, E2P_DATA
, (u32
)data
);
1708 /* Workaround for hardware read-after-write restriction */
1709 temp
= smsc911x_reg_read(pdata
, BYTE_TEST
);
1711 ret
= smsc911x_eeprom_send_cmd(pdata
, op
);
1717 static int smsc911x_ethtool_get_eeprom_len(struct net_device
*dev
)
1719 return SMSC911X_EEPROM_SIZE
;
1722 static int smsc911x_ethtool_get_eeprom(struct net_device
*dev
,
1723 struct ethtool_eeprom
*eeprom
, u8
*data
)
1725 struct smsc911x_data
*pdata
= netdev_priv(dev
);
1726 u8 eeprom_data
[SMSC911X_EEPROM_SIZE
];
1730 smsc911x_eeprom_enable_access(pdata
);
1732 len
= min(eeprom
->len
, SMSC911X_EEPROM_SIZE
);
1733 for (i
= 0; i
< len
; i
++) {
1734 int ret
= smsc911x_eeprom_read_location(pdata
, i
, eeprom_data
);
1741 memcpy(data
, &eeprom_data
[eeprom
->offset
], len
);
1746 static int smsc911x_ethtool_set_eeprom(struct net_device
*dev
,
1747 struct ethtool_eeprom
*eeprom
, u8
*data
)
1750 struct smsc911x_data
*pdata
= netdev_priv(dev
);
1752 smsc911x_eeprom_enable_access(pdata
);
1753 smsc911x_eeprom_send_cmd(pdata
, E2P_CMD_EPC_CMD_EWEN_
);
1754 ret
= smsc911x_eeprom_write_location(pdata
, eeprom
->offset
, *data
);
1755 smsc911x_eeprom_send_cmd(pdata
, E2P_CMD_EPC_CMD_EWDS_
);
1757 /* Single byte write, according to man page */
1763 static const struct ethtool_ops smsc911x_ethtool_ops
= {
1764 .get_settings
= smsc911x_ethtool_getsettings
,
1765 .set_settings
= smsc911x_ethtool_setsettings
,
1766 .get_link
= ethtool_op_get_link
,
1767 .get_drvinfo
= smsc911x_ethtool_getdrvinfo
,
1768 .nway_reset
= smsc911x_ethtool_nwayreset
,
1769 .get_msglevel
= smsc911x_ethtool_getmsglevel
,
1770 .set_msglevel
= smsc911x_ethtool_setmsglevel
,
1771 .get_regs_len
= smsc911x_ethtool_getregslen
,
1772 .get_regs
= smsc911x_ethtool_getregs
,
1773 .get_eeprom_len
= smsc911x_ethtool_get_eeprom_len
,
1774 .get_eeprom
= smsc911x_ethtool_get_eeprom
,
1775 .set_eeprom
= smsc911x_ethtool_set_eeprom
,
1778 static const struct net_device_ops smsc911x_netdev_ops
= {
1779 .ndo_open
= smsc911x_open
,
1780 .ndo_stop
= smsc911x_stop
,
1781 .ndo_start_xmit
= smsc911x_hard_start_xmit
,
1782 .ndo_get_stats
= smsc911x_get_stats
,
1783 .ndo_set_multicast_list
= smsc911x_set_multicast_list
,
1784 .ndo_do_ioctl
= smsc911x_do_ioctl
,
1785 .ndo_change_mtu
= eth_change_mtu
,
1786 .ndo_validate_addr
= eth_validate_addr
,
1787 .ndo_set_mac_address
= smsc911x_set_mac_address
,
1788 #ifdef CONFIG_NET_POLL_CONTROLLER
1789 .ndo_poll_controller
= smsc911x_poll_controller
,
1793 /* copies the current mac address from hardware to dev->dev_addr */
1794 static void __devinit
smsc911x_read_mac_address(struct net_device
*dev
)
1796 struct smsc911x_data
*pdata
= netdev_priv(dev
);
1797 u32 mac_high16
= smsc911x_mac_read(pdata
, ADDRH
);
1798 u32 mac_low32
= smsc911x_mac_read(pdata
, ADDRL
);
1800 dev
->dev_addr
[0] = (u8
)(mac_low32
);
1801 dev
->dev_addr
[1] = (u8
)(mac_low32
>> 8);
1802 dev
->dev_addr
[2] = (u8
)(mac_low32
>> 16);
1803 dev
->dev_addr
[3] = (u8
)(mac_low32
>> 24);
1804 dev
->dev_addr
[4] = (u8
)(mac_high16
);
1805 dev
->dev_addr
[5] = (u8
)(mac_high16
>> 8);
1808 /* Initializing private device structures, only called from probe */
1809 static int __devinit
smsc911x_init(struct net_device
*dev
)
1811 struct smsc911x_data
*pdata
= netdev_priv(dev
);
1812 unsigned int byte_test
;
1814 SMSC_TRACE(PROBE
, "Driver Parameters:");
1815 SMSC_TRACE(PROBE
, "LAN base: 0x%08lX",
1816 (unsigned long)pdata
->ioaddr
);
1817 SMSC_TRACE(PROBE
, "IRQ: %d", dev
->irq
);
1818 SMSC_TRACE(PROBE
, "PHY will be autodetected.");
1820 spin_lock_init(&pdata
->dev_lock
);
1822 if (pdata
->ioaddr
== 0) {
1823 SMSC_WARNING(PROBE
, "pdata->ioaddr: 0x00000000");
1827 /* Check byte ordering */
1828 byte_test
= smsc911x_reg_read(pdata
, BYTE_TEST
);
1829 SMSC_TRACE(PROBE
, "BYTE_TEST: 0x%08X", byte_test
);
1830 if (byte_test
== 0x43218765) {
1831 SMSC_TRACE(PROBE
, "BYTE_TEST looks swapped, "
1832 "applying WORD_SWAP");
1833 smsc911x_reg_write(pdata
, WORD_SWAP
, 0xffffffff);
1835 /* 1 dummy read of BYTE_TEST is needed after a write to
1836 * WORD_SWAP before its contents are valid */
1837 byte_test
= smsc911x_reg_read(pdata
, BYTE_TEST
);
1839 byte_test
= smsc911x_reg_read(pdata
, BYTE_TEST
);
1842 if (byte_test
!= 0x87654321) {
1843 SMSC_WARNING(DRV
, "BYTE_TEST: 0x%08X", byte_test
);
1844 if (((byte_test
>> 16) & 0xFFFF) == (byte_test
& 0xFFFF)) {
1846 "top 16 bits equal to bottom 16 bits");
1847 SMSC_TRACE(PROBE
, "This may mean the chip is set "
1848 "for 32 bit while the bus is reading 16 bit");
1853 /* Default generation to zero (all workarounds apply) */
1854 pdata
->generation
= 0;
1856 pdata
->idrev
= smsc911x_reg_read(pdata
, ID_REV
);
1857 switch (pdata
->idrev
& 0xFFFF0000) {
1862 /* LAN911[5678] family */
1863 pdata
->generation
= pdata
->idrev
& 0x0000FFFF;
1870 /* LAN921[5678] family */
1871 pdata
->generation
= 3;
1878 /* LAN9210/LAN9211/LAN9220/LAN9221 */
1879 pdata
->generation
= 4;
1883 SMSC_WARNING(PROBE
, "LAN911x not identified, idrev: 0x%08X",
1888 SMSC_TRACE(PROBE
, "LAN911x identified, idrev: 0x%08X, generation: %d",
1889 pdata
->idrev
, pdata
->generation
);
1891 if (pdata
->generation
== 0)
1893 "This driver is not intended for this chip revision");
1895 /* workaround for platforms without an eeprom, where the mac address
1896 * is stored elsewhere and set by the bootloader. This saves the
1897 * mac address before resetting the device */
1898 if (pdata
->config
.flags
& SMSC911X_SAVE_MAC_ADDRESS
)
1899 smsc911x_read_mac_address(dev
);
1901 /* Reset the LAN911x */
1902 if (smsc911x_soft_reset(pdata
))
1905 /* Disable all interrupt sources until we bring the device up */
1906 smsc911x_reg_write(pdata
, INT_EN
, 0);
1909 dev
->flags
|= IFF_MULTICAST
;
1910 netif_napi_add(dev
, &pdata
->napi
, smsc911x_poll
, SMSC_NAPI_WEIGHT
);
1911 dev
->netdev_ops
= &smsc911x_netdev_ops
;
1912 dev
->ethtool_ops
= &smsc911x_ethtool_ops
;
1917 static int __devexit
smsc911x_drv_remove(struct platform_device
*pdev
)
1919 struct net_device
*dev
;
1920 struct smsc911x_data
*pdata
;
1921 struct resource
*res
;
1923 dev
= platform_get_drvdata(pdev
);
1925 pdata
= netdev_priv(dev
);
1927 BUG_ON(!pdata
->ioaddr
);
1928 BUG_ON(!pdata
->phy_dev
);
1930 SMSC_TRACE(IFDOWN
, "Stopping driver.");
1932 phy_disconnect(pdata
->phy_dev
);
1933 pdata
->phy_dev
= NULL
;
1934 mdiobus_unregister(pdata
->mii_bus
);
1935 mdiobus_free(pdata
->mii_bus
);
1937 platform_set_drvdata(pdev
, NULL
);
1938 unregister_netdev(dev
);
1939 free_irq(dev
->irq
, dev
);
1940 res
= platform_get_resource_byname(pdev
, IORESOURCE_MEM
,
1943 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
1945 release_mem_region(res
->start
, resource_size(res
));
1947 iounmap(pdata
->ioaddr
);
1954 static int __devinit
smsc911x_drv_probe(struct platform_device
*pdev
)
1956 struct net_device
*dev
;
1957 struct smsc911x_data
*pdata
;
1958 struct smsc911x_platform_config
*config
= pdev
->dev
.platform_data
;
1959 struct resource
*res
, *irq_res
;
1960 unsigned int intcfg
= 0;
1961 int res_size
, irq_flags
;
1964 pr_info("%s: Driver version %s.\n", SMSC_CHIPNAME
, SMSC_DRV_VERSION
);
1966 /* platform data specifies irq & dynamic bus configuration */
1967 if (!pdev
->dev
.platform_data
) {
1968 pr_warning("%s: platform_data not provided\n", SMSC_CHIPNAME
);
1973 res
= platform_get_resource_byname(pdev
, IORESOURCE_MEM
,
1976 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
1978 pr_warning("%s: Could not allocate resource.\n",
1983 res_size
= resource_size(res
);
1985 irq_res
= platform_get_resource(pdev
, IORESOURCE_IRQ
, 0);
1987 pr_warning("%s: Could not allocate irq resource.\n",
1993 if (!request_mem_region(res
->start
, res_size
, SMSC_CHIPNAME
)) {
1998 dev
= alloc_etherdev(sizeof(struct smsc911x_data
));
2000 pr_warning("%s: Could not allocate device.\n", SMSC_CHIPNAME
);
2002 goto out_release_io_1
;
2005 SET_NETDEV_DEV(dev
, &pdev
->dev
);
2007 pdata
= netdev_priv(dev
);
2009 dev
->irq
= irq_res
->start
;
2010 irq_flags
= irq_res
->flags
& IRQF_TRIGGER_MASK
;
2011 pdata
->ioaddr
= ioremap_nocache(res
->start
, res_size
);
2013 /* copy config parameters across to pdata */
2014 memcpy(&pdata
->config
, config
, sizeof(pdata
->config
));
2017 pdata
->msg_enable
= ((1 << debug
) - 1);
2019 if (pdata
->ioaddr
== NULL
) {
2021 "Error smsc911x base address invalid");
2023 goto out_free_netdev_2
;
2026 retval
= smsc911x_init(dev
);
2028 goto out_unmap_io_3
;
2030 /* configure irq polarity and type before connecting isr */
2031 if (pdata
->config
.irq_polarity
== SMSC911X_IRQ_POLARITY_ACTIVE_HIGH
)
2032 intcfg
|= INT_CFG_IRQ_POL_
;
2034 if (pdata
->config
.irq_type
== SMSC911X_IRQ_TYPE_PUSH_PULL
)
2035 intcfg
|= INT_CFG_IRQ_TYPE_
;
2037 smsc911x_reg_write(pdata
, INT_CFG
, intcfg
);
2039 /* Ensure interrupts are globally disabled before connecting ISR */
2040 smsc911x_reg_write(pdata
, INT_EN
, 0);
2041 smsc911x_reg_write(pdata
, INT_STS
, 0xFFFFFFFF);
2043 retval
= request_irq(dev
->irq
, smsc911x_irqhandler
,
2044 irq_flags
| IRQF_SHARED
, dev
->name
, dev
);
2047 "Unable to claim requested irq: %d", dev
->irq
);
2048 goto out_unmap_io_3
;
2051 platform_set_drvdata(pdev
, dev
);
2053 retval
= register_netdev(dev
);
2056 "Error %i registering device", retval
);
2057 goto out_unset_drvdata_4
;
2059 SMSC_TRACE(PROBE
, "Network interface: \"%s\"", dev
->name
);
2062 spin_lock_init(&pdata
->mac_lock
);
2064 retval
= smsc911x_mii_init(pdev
, dev
);
2067 "Error %i initialising mii", retval
);
2068 goto out_unregister_netdev_5
;
2071 spin_lock_irq(&pdata
->mac_lock
);
2073 /* Check if mac address has been specified when bringing interface up */
2074 if (is_valid_ether_addr(dev
->dev_addr
)) {
2075 smsc911x_set_hw_mac_address(pdata
, dev
->dev_addr
);
2076 SMSC_TRACE(PROBE
, "MAC Address is specified by configuration");
2077 } else if (is_valid_ether_addr(pdata
->config
.mac
)) {
2078 memcpy(dev
->dev_addr
, pdata
->config
.mac
, 6);
2079 SMSC_TRACE(PROBE
, "MAC Address specified by platform data");
2081 /* Try reading mac address from device. if EEPROM is present
2082 * it will already have been set */
2085 if (is_valid_ether_addr(dev
->dev_addr
)) {
2086 /* eeprom values are valid so use them */
2088 "Mac Address is read from LAN911x EEPROM");
2090 /* eeprom values are invalid, generate random MAC */
2091 random_ether_addr(dev
->dev_addr
);
2092 smsc911x_set_hw_mac_address(pdata
, dev
->dev_addr
);
2094 "MAC Address is set to random_ether_addr");
2098 spin_unlock_irq(&pdata
->mac_lock
);
2100 dev_info(&dev
->dev
, "MAC Address: %pM\n", dev
->dev_addr
);
2104 out_unregister_netdev_5
:
2105 unregister_netdev(dev
);
2106 out_unset_drvdata_4
:
2107 platform_set_drvdata(pdev
, NULL
);
2108 free_irq(dev
->irq
, dev
);
2110 iounmap(pdata
->ioaddr
);
2114 release_mem_region(res
->start
, resource_size(res
));
2120 /* This implementation assumes the devices remains powered on its VDDVARIO
2121 * pins during suspend. */
2123 /* TODO: implement freeze/thaw callbacks for hibernation.*/
2125 static int smsc911x_suspend(struct device
*dev
)
2127 struct net_device
*ndev
= dev_get_drvdata(dev
);
2128 struct smsc911x_data
*pdata
= netdev_priv(ndev
);
2130 /* enable wake on LAN, energy detection and the external PME
2132 smsc911x_reg_write(pdata
, PMT_CTRL
,
2133 PMT_CTRL_PM_MODE_D1_
| PMT_CTRL_WOL_EN_
|
2134 PMT_CTRL_ED_EN_
| PMT_CTRL_PME_EN_
);
2139 static int smsc911x_resume(struct device
*dev
)
2141 struct net_device
*ndev
= dev_get_drvdata(dev
);
2142 struct smsc911x_data
*pdata
= netdev_priv(ndev
);
2143 unsigned int to
= 100;
2145 /* Note 3.11 from the datasheet:
2146 * "When the LAN9220 is in a power saving state, a write of any
2147 * data to the BYTE_TEST register will wake-up the device."
2149 smsc911x_reg_write(pdata
, BYTE_TEST
, 0);
2151 /* poll the READY bit in PMT_CTRL. Any other access to the device is
2152 * forbidden while this bit isn't set. Try for 100ms and return -EIO
2154 while (!(smsc911x_reg_read(pdata
, PMT_CTRL
) & PMT_CTRL_READY_
) && --to
)
2157 return (to
== 0) ? -EIO
: 0;
2160 static const struct dev_pm_ops smsc911x_pm_ops
= {
2161 .suspend
= smsc911x_suspend
,
2162 .resume
= smsc911x_resume
,
2165 #define SMSC911X_PM_OPS (&smsc911x_pm_ops)
2168 #define SMSC911X_PM_OPS NULL
2171 static struct platform_driver smsc911x_driver
= {
2172 .probe
= smsc911x_drv_probe
,
2173 .remove
= __devexit_p(smsc911x_drv_remove
),
2175 .name
= SMSC_CHIPNAME
,
2176 .owner
= THIS_MODULE
,
2177 .pm
= SMSC911X_PM_OPS
,
2181 /* Entry point for loading the module */
2182 static int __init
smsc911x_init_module(void)
2185 return platform_driver_register(&smsc911x_driver
);
2188 /* entry point for unloading the module */
2189 static void __exit
smsc911x_cleanup_module(void)
2191 platform_driver_unregister(&smsc911x_driver
);
2194 module_init(smsc911x_init_module
);
2195 module_exit(smsc911x_cleanup_module
);