drivers/net/usb/cdc_ether.c

   1 /*
   2  * CDC Ethernet based networking peripherals
   3  * Copyright (C) 2003-2005 by David Brownell
   4  * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, see <http://www.gnu.org/licenses/>.
  18  */
  19
  20 // #define      DEBUG                   // error path messages, extra info
  21 // #define      VERBOSE                 // more; success messages
  22
  23 #include <linux/module.h>
  24 #include <linux/netdevice.h>
  25 #include <linux/etherdevice.h>
  26 #include <linux/ethtool.h>
  27 #include <linux/workqueue.h>
  28 #include <linux/mii.h>
  29 #include <linux/usb.h>
  30 #include <linux/usb/cdc.h>
  31 #include <linux/usb/usbnet.h>
  32
  33
  34 #if IS_ENABLED(CONFIG_USB_NET_RNDIS_HOST)
  35
  36 static int is_rndis(struct usb_interface_descriptor *desc)
  37 {
  38         return (desc->bInterfaceClass == USB_CLASS_COMM &&
  39                 desc->bInterfaceSubClass == 2 &&
  40                 desc->bInterfaceProtocol == 0xff);
  41 }
  42
  43 static int is_activesync(struct usb_interface_descriptor *desc)
  44 {
  45         return (desc->bInterfaceClass == USB_CLASS_MISC &&
  46                 desc->bInterfaceSubClass == 1 &&
  47                 desc->bInterfaceProtocol == 1);
  48 }
  49
  50 static int is_wireless_rndis(struct usb_interface_descriptor *desc)
  51 {
  52         return (desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER &&
  53                 desc->bInterfaceSubClass == 1 &&
  54                 desc->bInterfaceProtocol == 3);
  55 }
  56
  57 static int is_novatel_rndis(struct usb_interface_descriptor *desc)
  58 {
  59         return (desc->bInterfaceClass == USB_CLASS_MISC &&
  60                 desc->bInterfaceSubClass == 4 &&
  61                 desc->bInterfaceProtocol == 1);
  62 }
  63
  64 #else
  65
  66 #define is_rndis(desc)          0
  67 #define is_activesync(desc)     0
  68 #define is_wireless_rndis(desc) 0
  69 #define is_novatel_rndis(desc)  0
  70
  71 #endif
  72
  73 static const u8 mbm_guid[16] = {
  74         0xa3, 0x17, 0xa8, 0x8b, 0x04, 0x5e, 0x4f, 0x01,
  75         0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a,
  76 };
  77
  78 static void usbnet_cdc_update_filter(struct usbnet *dev)
  79 {
  80         struct cdc_state        *info = (void *) &dev->data;
  81         struct usb_interface    *intf = info->control;
  82         struct net_device       *net = dev->net;
  83
  84         u16 cdc_filter = USB_CDC_PACKET_TYPE_DIRECTED
  85                         | USB_CDC_PACKET_TYPE_BROADCAST;
  86
  87         /* filtering on the device is an optional feature and not worth
  88          * the hassle so we just roughly care about snooping and if any
  89          * multicast is requested, we take every multicast
  90          */
  91         if (net->flags & IFF_PROMISC)
  92                 cdc_filter |= USB_CDC_PACKET_TYPE_PROMISCUOUS;
  93         if (!netdev_mc_empty(net) || (net->flags & IFF_ALLMULTI))
  94                 cdc_filter |= USB_CDC_PACKET_TYPE_ALL_MULTICAST;
  95
  96         usb_control_msg(dev->udev,
  97                         usb_sndctrlpipe(dev->udev, 0),
  98                         USB_CDC_SET_ETHERNET_PACKET_FILTER,
  99                         USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 100                         cdc_filter,
 101                         intf->cur_altsetting->desc.bInterfaceNumber,
 102                         NULL,
 103                         0,
 104                         USB_CTRL_SET_TIMEOUT
 105                 );
 106 }
 107
 108 /* probes control interface, claims data interface, collects the bulk
 109  * endpoints, activates data interface (if needed), maybe sets MTU.
 110  * all pure cdc, except for certain firmware workarounds, and knowing
 111  * that rndis uses one different rule.
 112  */
 113 int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
 114 {
 115         u8                              *buf = intf->cur_altsetting->extra;
 116         int                             len = intf->cur_altsetting->extralen;
 117         struct usb_interface_descriptor *d;
 118         struct cdc_state                *info = (void *) &dev->data;
 119         int                             status;
 120         int                             rndis;
 121         bool                            android_rndis_quirk = false;
 122         struct usb_driver               *driver = driver_of(intf);
 123         struct usb_cdc_parsed_header header;
 124
 125         if (sizeof(dev->data) < sizeof(*info))
 126                 return -EDOM;
 127
 128         /* expect strict spec conformance for the descriptors, but
 129          * cope with firmware which stores them in the wrong place
 130          */
 131         if (len == 0 && dev->udev->actconfig->extralen) {
 132                 /* Motorola SB4100 (and others: Brad Hards says it's
 133                  * from a Broadcom design) put CDC descriptors here
 134                  */
 135                 buf = dev->udev->actconfig->extra;
 136                 len = dev->udev->actconfig->extralen;
 137                 dev_dbg(&intf->dev, "CDC descriptors on config\n");
 138         }
 139
 140         /* Maybe CDC descriptors are after the endpoint?  This bug has
 141          * been seen on some 2Wire Inc RNDIS-ish products.
 142          */
 143         if (len == 0) {
 144                 struct usb_host_endpoint        *hep;
 145
 146                 hep = intf->cur_altsetting->endpoint;
 147                 if (hep) {
 148                         buf = hep->extra;
 149                         len = hep->extralen;
 150                 }
 151                 if (len)
 152                         dev_dbg(&intf->dev,
 153                                 "CDC descriptors on endpoint\n");
 154         }
 155
 156         /* this assumes that if there's a non-RNDIS vendor variant
 157          * of cdc-acm, it'll fail RNDIS requests cleanly.
 158          */
 159         rndis = (is_rndis(&intf->cur_altsetting->desc) ||
 160                  is_activesync(&intf->cur_altsetting->desc) ||
 161                  is_wireless_rndis(&intf->cur_altsetting->desc) ||
 162                  is_novatel_rndis(&intf->cur_altsetting->desc));
 163
 164         memset(info, 0, sizeof(*info));
 165         info->control = intf;
 166
 167         cdc_parse_cdc_header(&header, intf, buf, len);
 168
 169         info->u = header.usb_cdc_union_desc;
 170         info->header = header.usb_cdc_header_desc;
 171         info->ether = header.usb_cdc_ether_desc;
 172         if (!info->u) {
 173                 if (rndis)
 174                         goto skip;
 175                 else /* in that case a quirk is mandatory */
 176                         goto bad_desc;
 177         }
 178         /* we need a master/control interface (what we're
 179          * probed with) and a slave/data interface; union
 180          * descriptors sort this all out.
 181          */
 182         info->control = usb_ifnum_to_if(dev->udev,
 183         info->u->bMasterInterface0);
 184         info->data = usb_ifnum_to_if(dev->udev,
 185                 info->u->bSlaveInterface0);
 186         if (!info->control || !info->data) {
 187                 dev_dbg(&intf->dev,
 188                         "master #%u/%p slave #%u/%p\n",
 189                         info->u->bMasterInterface0,
 190                         info->control,
 191                         info->u->bSlaveInterface0,
 192                         info->data);
 193                 /* fall back to hard-wiring for RNDIS */
 194                 if (rndis) {
 195                         android_rndis_quirk = true;
 196                         goto skip;
 197                 }
 198                 goto bad_desc;
 199         }
 200         if (info->control != intf) {
 201                 dev_dbg(&intf->dev, "bogus CDC Union\n");
 202                 /* Ambit USB Cable Modem (and maybe others)
 203                  * interchanges master and slave interface.
 204                  */
 205                 if (info->data == intf) {
 206                         info->data = info->control;
 207                         info->control = intf;
 208                 } else
 209                         goto bad_desc;
 210         }
 211
 212         /* some devices merge these - skip class check */
 213         if (info->control == info->data)
 214                 goto skip;
 215
 216         /* a data interface altsetting does the real i/o */
 217         d = &info->data->cur_altsetting->desc;
 218         if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
 219                 dev_dbg(&intf->dev, "slave class %u\n",
 220                         d->bInterfaceClass);
 221                 goto bad_desc;
 222         }
 223 skip:
 224         if (    rndis &&
 225                 header.usb_cdc_acm_descriptor &&
 226                 header.usb_cdc_acm_descriptor->bmCapabilities) {
 227                         dev_dbg(&intf->dev,
 228                                 "ACM capabilities %02x, not really RNDIS?\n",
 229                                 header.usb_cdc_acm_descriptor->bmCapabilities);
 230                         goto bad_desc;
 231         }
 232
 233         if (header.usb_cdc_ether_desc) {
 234                 dev->hard_mtu = le16_to_cpu(info->ether->wMaxSegmentSize);
 235                 /* because of Zaurus, we may be ignoring the host
 236                  * side link address we were given.
 237                  */
 238         }
 239
 240         if (header.usb_cdc_mdlm_desc &&
 241                 memcmp(header.usb_cdc_mdlm_desc->bGUID, mbm_guid, 16)) {
 242                 dev_dbg(&intf->dev, "GUID doesn't match\n");
 243                 goto bad_desc;
 244         }
 245
 246         if (header.usb_cdc_mdlm_detail_desc &&
 247                 header.usb_cdc_mdlm_detail_desc->bLength <
 248                         (sizeof(struct usb_cdc_mdlm_detail_desc) + 1)) {
 249                 dev_dbg(&intf->dev, "Descriptor too short\n");
 250                 goto bad_desc;
 251         }
 252
 253
 254
 255         /* Microsoft ActiveSync based and some regular RNDIS devices lack the
 256          * CDC descriptors, so we'll hard-wire the interfaces and not check
 257          * for descriptors.
 258          *
 259          * Some Android RNDIS devices have a CDC Union descriptor pointing
 260          * to non-existing interfaces.  Ignore that and attempt the same
 261          * hard-wired 0 and 1 interfaces.
 262          */
 263         if (rndis && (!info->u || android_rndis_quirk)) {
 264                 info->control = usb_ifnum_to_if(dev->udev, 0);
 265                 info->data = usb_ifnum_to_if(dev->udev, 1);
 266                 if (!info->control || !info->data || info->control != intf) {
 267                         dev_dbg(&intf->dev,
 268                                 "rndis: master #0/%p slave #1/%p\n",
 269                                 info->control,
 270                                 info->data);
 271                         goto bad_desc;
 272                 }
 273
 274         } else if (!info->header || (!rndis && !info->ether)) {
 275                 dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n",
 276                         info->header ? "" : "header ",
 277                         info->u ? "" : "union ",
 278                         info->ether ? "" : "ether ");
 279                 goto bad_desc;
 280         }
 281
 282         /* claim data interface and set it up ... with side effects.
 283          * network traffic can't flow until an altsetting is enabled.
 284          */
 285         if (info->data != info->control) {
 286                 status = usb_driver_claim_interface(driver, info->data, dev);
 287                 if (status < 0)
 288                         return status;
 289         }
 290         status = usbnet_get_endpoints(dev, info->data);
 291         if (status < 0) {
 292                 /* ensure immediate exit from usbnet_disconnect */
 293                 usb_set_intfdata(info->data, NULL);
 294                 if (info->data != info->control)
 295                         usb_driver_release_interface(driver, info->data);
 296                 return status;
 297         }
 298
 299         /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
 300         if (info->data != info->control)
 301                 dev->status = NULL;
 302         if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
 303                 struct usb_endpoint_descriptor  *desc;
 304
 305                 dev->status = &info->control->cur_altsetting->endpoint [0];
 306                 desc = &dev->status->desc;
 307                 if (!usb_endpoint_is_int_in(desc) ||
 308                     (le16_to_cpu(desc->wMaxPacketSize)
 309                      < sizeof(struct usb_cdc_notification)) ||
 310                     !desc->bInterval) {
 311                         dev_dbg(&intf->dev, "bad notification endpoint\n");
 312                         dev->status = NULL;
 313                 }
 314         }
 315         if (rndis && !dev->status) {
 316                 dev_dbg(&intf->dev, "missing RNDIS status endpoint\n");
 317                 usb_set_intfdata(info->data, NULL);
 318                 usb_driver_release_interface(driver, info->data);
 319                 return -ENODEV;
 320         }
 321
 322         return 0;
 323
 324 bad_desc:
 325         dev_info(&dev->udev->dev, "bad CDC descriptors\n");
 326         return -ENODEV;
 327 }
 328 EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
 329
 330
 331 /* like usbnet_generic_cdc_bind() but handles filter initialization
 332  * correctly
 333  */
 334 int usbnet_ether_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
 335 {
 336         int rv;
 337
 338         rv = usbnet_generic_cdc_bind(dev, intf);
 339         if (rv < 0)
 340                 goto bail_out;
 341
 342         /* Some devices don't initialise properly. In particular
 343          * the packet filter is not reset. There are devices that
 344          * don't do reset all the way. So the packet filter should
 345          * be set to a sane initial value.
 346          */
 347         usbnet_cdc_update_filter(dev);
 348
 349 bail_out:
 350         return rv;
 351 }
 352 EXPORT_SYMBOL_GPL(usbnet_ether_cdc_bind);
 353
 354 void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
 355 {
 356         struct cdc_state                *info = (void *) &dev->data;
 357         struct usb_driver               *driver = driver_of(intf);
 358
 359         /* combined interface - nothing  to do */
 360         if (info->data == info->control)
 361                 return;
 362
 363         /* disconnect master --> disconnect slave */
 364         if (intf == info->control && info->data) {
 365                 /* ensure immediate exit from usbnet_disconnect */
 366                 usb_set_intfdata(info->data, NULL);
 367                 usb_driver_release_interface(driver, info->data);
 368                 info->data = NULL;
 369         }
 370
 371         /* and vice versa (just in case) */
 372         else if (intf == info->data && info->control) {
 373                 /* ensure immediate exit from usbnet_disconnect */
 374                 usb_set_intfdata(info->control, NULL);
 375                 usb_driver_release_interface(driver, info->control);
 376                 info->control = NULL;
 377         }
 378 }
 379 EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
 380
 381 /* Communications Device Class, Ethernet Control model
 382  *
 383  * Takes two interfaces.  The DATA interface is inactive till an altsetting
 384  * is selected.  Configuration data includes class descriptors.  There's
 385  * an optional status endpoint on the control interface.
 386  *
 387  * This should interop with whatever the 2.4 "CDCEther.c" driver
 388  * (by Brad Hards) talked with, with more functionality.
 389  */
 390
 391 static void dumpspeed(struct usbnet *dev, __le32 *speeds)
 392 {
 393         netif_info(dev, timer, dev->net,
 394                    "link speeds: %u kbps up, %u kbps down\n",
 395                    __le32_to_cpu(speeds[0]) / 1000,
 396                    __le32_to_cpu(speeds[1]) / 1000);
 397 }
 398
 399 void usbnet_cdc_status(struct usbnet *dev, struct urb *urb)
 400 {
 401         struct usb_cdc_notification     *event;
 402
 403         if (urb->actual_length < sizeof(*event))
 404                 return;
 405
 406         /* SPEED_CHANGE can get split into two 8-byte packets */
 407         if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
 408                 dumpspeed(dev, (__le32 *) urb->transfer_buffer);
 409                 return;
 410         }
 411
 412         event = urb->transfer_buffer;
 413         switch (event->bNotificationType) {
 414         case USB_CDC_NOTIFY_NETWORK_CONNECTION:
 415                 netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
 416                           event->wValue ? "on" : "off");
 417                 usbnet_link_change(dev, !!event->wValue, 0);
 418                 break;
 419         case USB_CDC_NOTIFY_SPEED_CHANGE:       /* tx/rx rates */
 420                 netif_dbg(dev, timer, dev->net, "CDC: speed change (len %d)\n",
 421                           urb->actual_length);
 422                 if (urb->actual_length != (sizeof(*event) + 8))
 423                         set_bit(EVENT_STS_SPLIT, &dev->flags);
 424                 else
 425                         dumpspeed(dev, (__le32 *) &event[1]);
 426                 break;
 427         /* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS),
 428          * but there are no standard formats for the response data.
 429          */
 430         default:
 431                 netdev_err(dev->net, "CDC: unexpected notification %02x!\n",
 432                            event->bNotificationType);
 433                 break;
 434         }
 435 }
 436 EXPORT_SYMBOL_GPL(usbnet_cdc_status);
 437
 438 int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
 439 {
 440         int                             status;
 441         struct cdc_state                *info = (void *) &dev->data;
 442
 443         BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data)
 444                         < sizeof(struct cdc_state)));
 445
 446         status = usbnet_ether_cdc_bind(dev, intf);
 447         if (status < 0)
 448                 return status;
 449
 450         status = usbnet_get_ethernet_addr(dev, info->ether->iMACAddress);
 451         if (status < 0) {
 452                 usb_set_intfdata(info->data, NULL);
 453                 usb_driver_release_interface(driver_of(intf), info->data);
 454                 return status;
 455         }
 456
 457         return 0;
 458 }
 459 EXPORT_SYMBOL_GPL(usbnet_cdc_bind);
 460
 461 static int usbnet_cdc_zte_bind(struct usbnet *dev, struct usb_interface *intf)
 462 {
 463         int status = usbnet_cdc_bind(dev, intf);
 464
 465         if (!status && (dev->net->dev_addr[0] & 0x02))
 466                 eth_hw_addr_random(dev->net);
 467
 468         return status;
 469 }
 470
 471 /* Make sure packets have correct destination MAC address
 472  *
 473  * A firmware bug observed on some devices (ZTE MF823/831/910) is that the
 474  * device sends packets with a static, bogus, random MAC address (event if
 475  * device MAC address has been updated). Always set MAC address to that of the
 476  * device.
 477  */
 478 static int usbnet_cdc_zte_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 479 {
 480         if (skb->len < ETH_HLEN || !(skb->data[0] & 0x02))
 481                 return 1;
 482
 483         skb_reset_mac_header(skb);
 484         ether_addr_copy(eth_hdr(skb)->h_dest, dev->net->dev_addr);
 485
 486         return 1;
 487 }
 488
 489 /* Ensure correct link state
 490  *
 491  * Some devices (ZTE MF823/831/910) export two carrier on notifications when
 492  * connected. This causes the link state to be incorrect. Work around this by
 493  * always setting the state to off, then on.
 494  */
 495 static void usbnet_cdc_zte_status(struct usbnet *dev, struct urb *urb)
 496 {
 497         struct usb_cdc_notification *event;
 498
 499         if (urb->actual_length < sizeof(*event))
 500                 return;
 501
 502         event = urb->transfer_buffer;
 503
 504         if (event->bNotificationType != USB_CDC_NOTIFY_NETWORK_CONNECTION) {
 505                 usbnet_cdc_status(dev, urb);
 506                 return;
 507         }
 508
 509         netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
 510                   event->wValue ? "on" : "off");
 511
 512         if (event->wValue &&
 513             netif_carrier_ok(dev->net))
 514                 netif_carrier_off(dev->net);
 515
 516         usbnet_link_change(dev, !!event->wValue, 0);
 517 }
 518
 519 static const struct driver_info cdc_info = {
 520         .description =  "CDC Ethernet Device",
 521         .flags =        FLAG_ETHER | FLAG_POINTTOPOINT,
 522         .bind =         usbnet_cdc_bind,
 523         .unbind =       usbnet_cdc_unbind,
 524         .status =       usbnet_cdc_status,
 525         .set_rx_mode =  usbnet_cdc_update_filter,
 526         .manage_power = usbnet_manage_power,
 527 };
 528
 529 static const struct driver_info zte_cdc_info = {
 530         .description =  "ZTE CDC Ethernet Device",
 531         .flags =        FLAG_ETHER | FLAG_POINTTOPOINT,
 532         .bind =         usbnet_cdc_zte_bind,
 533         .unbind =       usbnet_cdc_unbind,
 534         .status =       usbnet_cdc_zte_status,
 535         .set_rx_mode =  usbnet_cdc_update_filter,
 536         .manage_power = usbnet_manage_power,
 537         .rx_fixup = usbnet_cdc_zte_rx_fixup,
 538 };
 539
 540 static const struct driver_info wwan_info = {
 541         .description =  "Mobile Broadband Network Device",
 542         .flags =        FLAG_WWAN,
 543         .bind =         usbnet_cdc_bind,
 544         .unbind =       usbnet_cdc_unbind,
 545         .status =       usbnet_cdc_status,
 546         .set_rx_mode =  usbnet_cdc_update_filter,
 547         .manage_power = usbnet_manage_power,
 548 };
 549
 550 /*-------------------------------------------------------------------------*/
 551
 552 #define HUAWEI_VENDOR_ID        0x12D1
 553 #define NOVATEL_VENDOR_ID       0x1410
 554 #define ZTE_VENDOR_ID           0x19D2
 555 #define DELL_VENDOR_ID          0x413C
 556 #define REALTEK_VENDOR_ID       0x0bda
 557 #define SAMSUNG_VENDOR_ID       0x04e8
 558 #define LENOVO_VENDOR_ID        0x17ef
 559 #define LINKSYS_VENDOR_ID       0x13b1
 560 #define NVIDIA_VENDOR_ID        0x0955
 561 #define HP_VENDOR_ID            0x03f0
 562 #define MICROSOFT_VENDOR_ID     0x045e
 563 #define UBLOX_VENDOR_ID         0x1546
 564 #define TPLINK_VENDOR_ID        0x2357
 565
 566 static const struct usb_device_id       products[] = {
 567 /* BLACKLIST !!
 568  *
 569  * First blacklist any products that are egregiously nonconformant
 570  * with the CDC Ethernet specs.  Minor braindamage we cope with; when
 571  * they're not even trying, needing a separate driver is only the first
 572  * of the differences to show up.
 573  */
 574
 575 #define ZAURUS_MASTER_INTERFACE \
 576         .bInterfaceClass        = USB_CLASS_COMM, \
 577         .bInterfaceSubClass     = USB_CDC_SUBCLASS_ETHERNET, \
 578         .bInterfaceProtocol     = USB_CDC_PROTO_NONE
 579
 580 /* SA-1100 based Sharp Zaurus ("collie"), or compatible;
 581  * wire-incompatible with true CDC Ethernet implementations.
 582  * (And, it seems, needlessly so...)
 583  */
 584 {
 585         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 586                           | USB_DEVICE_ID_MATCH_DEVICE,
 587         .idVendor               = 0x04DD,
 588         .idProduct              = 0x8004,
 589         ZAURUS_MASTER_INTERFACE,
 590         .driver_info            = 0,
 591 },
 592
 593 /* PXA-25x based Sharp Zaurii.  Note that it seems some of these
 594  * (later models especially) may have shipped only with firmware
 595  * advertising false "CDC MDLM" compatibility ... but we're not
 596  * clear which models did that, so for now let's assume the worst.
 597  */
 598 {
 599         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 600                           | USB_DEVICE_ID_MATCH_DEVICE,
 601         .idVendor               = 0x04DD,
 602         .idProduct              = 0x8005,       /* A-300 */
 603         ZAURUS_MASTER_INTERFACE,
 604         .driver_info            = 0,
 605 }, {
 606         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 607                           | USB_DEVICE_ID_MATCH_DEVICE,
 608         .idVendor               = 0x04DD,
 609         .idProduct              = 0x8006,       /* B-500/SL-5600 */
 610         ZAURUS_MASTER_INTERFACE,
 611         .driver_info            = 0,
 612 }, {
 613         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 614                           | USB_DEVICE_ID_MATCH_DEVICE,
 615         .idVendor               = 0x04DD,
 616         .idProduct              = 0x8007,       /* C-700 */
 617         ZAURUS_MASTER_INTERFACE,
 618         .driver_info            = 0,
 619 }, {
 620         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 621                  | USB_DEVICE_ID_MATCH_DEVICE,
 622         .idVendor               = 0x04DD,
 623         .idProduct              = 0x9031,       /* C-750 C-760 */
 624         ZAURUS_MASTER_INTERFACE,
 625         .driver_info            = 0,
 626 }, {
 627         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 628                  | USB_DEVICE_ID_MATCH_DEVICE,
 629         .idVendor               = 0x04DD,
 630         .idProduct              = 0x9032,       /* SL-6000 */
 631         ZAURUS_MASTER_INTERFACE,
 632         .driver_info            = 0,
 633 }, {
 634         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 635                  | USB_DEVICE_ID_MATCH_DEVICE,
 636         .idVendor               = 0x04DD,
 637         /* reported with some C860 units */
 638         .idProduct              = 0x9050,       /* C-860 */
 639         ZAURUS_MASTER_INTERFACE,
 640         .driver_info            = 0,
 641 },
 642
 643 /* Olympus has some models with a Zaurus-compatible option.
 644  * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
 645  */
 646 {
 647         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 648                  | USB_DEVICE_ID_MATCH_DEVICE,
 649         .idVendor               = 0x07B4,
 650         .idProduct              = 0x0F02,       /* R-1000 */
 651         ZAURUS_MASTER_INTERFACE,
 652         .driver_info            = 0,
 653 },
 654
 655 /* LG Electronics VL600 wants additional headers on every frame */
 656 {
 657         USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
 658                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 659         .driver_info = 0,
 660 },
 661
 662 /* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
 663 {
 664         USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
 665                         USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
 666         .driver_info            = 0,
 667 },
 668
 669 /* Novatel USB551L and MC551 - handled by qmi_wwan */
 670 {
 671         USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0xB001, USB_CLASS_COMM,
 672                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 673         .driver_info = 0,
 674 },
 675
 676 /* Novatel E362 - handled by qmi_wwan */
 677 {
 678         USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9010, USB_CLASS_COMM,
 679                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 680         .driver_info = 0,
 681 },
 682
 683 /* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
 684 {
 685         USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8195, USB_CLASS_COMM,
 686                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 687         .driver_info = 0,
 688 },
 689
 690 /* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
 691 {
 692         USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8196, USB_CLASS_COMM,
 693                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 694         .driver_info = 0,
 695 },
 696
 697 /* Dell Wireless 5804 (Novatel E371) - handled by qmi_wwan */
 698 {
 699         USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x819b, USB_CLASS_COMM,
 700                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 701         .driver_info = 0,
 702 },
 703
 704 /* Novatel Expedite E371 - handled by qmi_wwan */
 705 {
 706         USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9011, USB_CLASS_COMM,
 707                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 708         .driver_info = 0,
 709 },
 710
 711 /* HP lt2523 (Novatel E371) - handled by qmi_wwan */
 712 {
 713         USB_DEVICE_AND_INTERFACE_INFO(HP_VENDOR_ID, 0x421d, USB_CLASS_COMM,
 714                                       USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 715         .driver_info = 0,
 716 },
 717
 718 /* AnyDATA ADU960S - handled by qmi_wwan */
 719 {
 720         USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, USB_CLASS_COMM,
 721                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 722         .driver_info = 0,
 723 },
 724
 725 /* Huawei E1820 - handled by qmi_wwan */
 726 {
 727         USB_DEVICE_INTERFACE_NUMBER(HUAWEI_VENDOR_ID, 0x14ac, 1),
 728         .driver_info = 0,
 729 },
 730
 731 /* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */
 732 {
 733         USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM,
 734                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 735         .driver_info = 0,
 736 },
 737
 738 /* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */
 739 {
 740         USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM,
 741                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 742         .driver_info = 0,
 743 },
 744
 745 /* Samsung USB Ethernet Adapters */
 746 {
 747         USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, 0xa101, USB_CLASS_COMM,
 748                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 749         .driver_info = 0,
 750 },
 751
 752 #if IS_ENABLED(CONFIG_USB_RTL8152)
 753 /* Linksys USB3GIGV1 Ethernet Adapter */
 754 {
 755         USB_DEVICE_AND_INTERFACE_INFO(LINKSYS_VENDOR_ID, 0x0041, USB_CLASS_COMM,
 756                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 757         .driver_info = 0,
 758 },
 759 #endif
 760
 761 /* ThinkPad USB-C Dock (based on Realtek RTL8153) */
 762 {
 763         USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x3062, USB_CLASS_COMM,
 764                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 765         .driver_info = 0,
 766 },
 767
 768 /* ThinkPad Thunderbolt 3 Dock (based on Realtek RTL8153) */
 769 {
 770         USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x3069, USB_CLASS_COMM,
 771                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 772         .driver_info = 0,
 773 },
 774
 775 /* Lenovo Thinkpad USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
 776 {
 777         USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x7205, USB_CLASS_COMM,
 778                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 779         .driver_info = 0,
 780 },
 781
 782 /* Lenovo USB C to Ethernet Adapter (based on Realtek RTL8153) */
 783 {
 784         USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x720c, USB_CLASS_COMM,
 785                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 786         .driver_info = 0,
 787 },
 788
 789 /* Lenovo USB-C Travel Hub (based on Realtek RTL8153) */
 790 {
 791         USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x7214, USB_CLASS_COMM,
 792                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 793         .driver_info = 0,
 794 },
 795
 796 /* NVIDIA Tegra USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
 797 {
 798         USB_DEVICE_AND_INTERFACE_INFO(NVIDIA_VENDOR_ID, 0x09ff, USB_CLASS_COMM,
 799                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 800         .driver_info = 0,
 801 },
 802
 803 /* Microsoft Surface 2 dock (based on Realtek RTL8152) */
 804 {
 805         USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x07ab, USB_CLASS_COMM,
 806                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 807         .driver_info = 0,
 808 },
 809
 810 /* Microsoft Surface 3 dock (based on Realtek RTL8153) */
 811 {
 812         USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x07c6, USB_CLASS_COMM,
 813                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 814         .driver_info = 0,
 815 },
 816
 817         /* TP-LINK UE300 USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
 818 {
 819         USB_DEVICE_AND_INTERFACE_INFO(TPLINK_VENDOR_ID, 0x0601, USB_CLASS_COMM,
 820                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 821         .driver_info = 0,
 822 },
 823
 824 /* WHITELIST!!!
 825  *
 826  * CDC Ether uses two interfaces, not necessarily consecutive.
 827  * We match the main interface, ignoring the optional device
 828  * class so we could handle devices that aren't exclusively
 829  * CDC ether.
 830  *
 831  * NOTE:  this match must come AFTER entries blacklisting devices
 832  * because of bugs/quirks in a given product (like Zaurus, above).
 833  */
 834 {
 835         /* ZTE (Vodafone) K3805-Z */
 836         USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1003, USB_CLASS_COMM,
 837                                       USB_CDC_SUBCLASS_ETHERNET,
 838                                       USB_CDC_PROTO_NONE),
 839         .driver_info = (unsigned long)&wwan_info,
 840 }, {
 841         /* ZTE (Vodafone) K3806-Z */
 842         USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1015, USB_CLASS_COMM,
 843                                       USB_CDC_SUBCLASS_ETHERNET,
 844                                       USB_CDC_PROTO_NONE),
 845         .driver_info = (unsigned long)&wwan_info,
 846 }, {
 847         /* ZTE (Vodafone) K4510-Z */
 848         USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1173, USB_CLASS_COMM,
 849                                       USB_CDC_SUBCLASS_ETHERNET,
 850                                       USB_CDC_PROTO_NONE),
 851         .driver_info = (unsigned long)&wwan_info,
 852 }, {
 853         /* ZTE (Vodafone) K3770-Z */
 854         USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1177, USB_CLASS_COMM,
 855                                       USB_CDC_SUBCLASS_ETHERNET,
 856                                       USB_CDC_PROTO_NONE),
 857         .driver_info = (unsigned long)&wwan_info,
 858 }, {
 859         /* ZTE (Vodafone) K3772-Z */
 860         USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1181, USB_CLASS_COMM,
 861                                       USB_CDC_SUBCLASS_ETHERNET,
 862                                       USB_CDC_PROTO_NONE),
 863         .driver_info = (unsigned long)&wwan_info,
 864 }, {
 865         /* Telit modules */
 866         USB_VENDOR_AND_INTERFACE_INFO(0x1bc7, USB_CLASS_COMM,
 867                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 868         .driver_info = (kernel_ulong_t) &wwan_info,
 869 }, {
 870         /* Dell DW5580 modules */
 871         USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x81ba, USB_CLASS_COMM,
 872                         USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 873         .driver_info = (kernel_ulong_t)&wwan_info,
 874 }, {
 875         /* Huawei ME906 and ME909 */
 876         USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x15c1, USB_CLASS_COMM,
 877                                       USB_CDC_SUBCLASS_ETHERNET,
 878                                       USB_CDC_PROTO_NONE),
 879         .driver_info = (unsigned long)&wwan_info,
 880 }, {
 881         /* ZTE modules */
 882         USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, USB_CLASS_COMM,
 883                                       USB_CDC_SUBCLASS_ETHERNET,
 884                                       USB_CDC_PROTO_NONE),
 885         .driver_info = (unsigned long)&zte_cdc_info,
 886 }, {
 887         /* U-blox TOBY-L2 */
 888         USB_DEVICE_AND_INTERFACE_INFO(UBLOX_VENDOR_ID, 0x1143, USB_CLASS_COMM,
 889                                       USB_CDC_SUBCLASS_ETHERNET,
 890                                       USB_CDC_PROTO_NONE),
 891         .driver_info = (unsigned long)&wwan_info,
 892 }, {
 893         /* U-blox SARA-U2 */
 894         USB_DEVICE_AND_INTERFACE_INFO(UBLOX_VENDOR_ID, 0x1104, USB_CLASS_COMM,
 895                                       USB_CDC_SUBCLASS_ETHERNET,
 896                                       USB_CDC_PROTO_NONE),
 897         .driver_info = (unsigned long)&wwan_info,
 898 }, {
 899         USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
 900                         USB_CDC_PROTO_NONE),
 901         .driver_info = (unsigned long) &cdc_info,
 902 }, {
 903         USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
 904                         USB_CDC_PROTO_NONE),
 905         .driver_info = (unsigned long)&wwan_info,
 906
 907 }, {
 908         /* Various Huawei modems with a network port like the UMG1831 */
 909         USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_COMM,
 910                                       USB_CDC_SUBCLASS_ETHERNET, 255),
 911         .driver_info = (unsigned long)&wwan_info,
 912 },
 913         { },            /* END */
 914 };
 915 MODULE_DEVICE_TABLE(usb, products);
 916
 917 static struct usb_driver cdc_driver = {
 918         .name =         "cdc_ether",
 919         .id_table =     products,
 920         .probe =        usbnet_probe,
 921         .disconnect =   usbnet_disconnect,
 922         .suspend =      usbnet_suspend,
 923         .resume =       usbnet_resume,
 924         .reset_resume = usbnet_resume,
 925         .supports_autosuspend = 1,
 926         .disable_hub_initiated_lpm = 1,
 927 };
 928
 929 module_usb_driver(cdc_driver);
 930
 931 MODULE_AUTHOR("David Brownell");
 932 MODULE_DESCRIPTION("USB CDC Ethernet devices");
 933 MODULE_LICENSE("GPL");