]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - drivers/net/usb/cdc_ether.c
ASoC: wm_adsp: add support for DSP region lock
[mirror_ubuntu-bionic-kernel.git] / drivers / net / usb / cdc_ether.c
1 /*
2 * CDC Ethernet based networking peripherals
3 * Copyright (C) 2003-2005 by David Brownell
4 * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, see <http://www.gnu.org/licenses/>.
18 */
19
20 // #define DEBUG // error path messages, extra info
21 // #define VERBOSE // more; success messages
22
23 #include <linux/module.h>
24 #include <linux/netdevice.h>
25 #include <linux/etherdevice.h>
26 #include <linux/ethtool.h>
27 #include <linux/workqueue.h>
28 #include <linux/mii.h>
29 #include <linux/usb.h>
30 #include <linux/usb/cdc.h>
31 #include <linux/usb/usbnet.h>
32
33
34 #if IS_ENABLED(CONFIG_USB_NET_RNDIS_HOST)
35
36 static int is_rndis(struct usb_interface_descriptor *desc)
37 {
38 return (desc->bInterfaceClass == USB_CLASS_COMM &&
39 desc->bInterfaceSubClass == 2 &&
40 desc->bInterfaceProtocol == 0xff);
41 }
42
43 static int is_activesync(struct usb_interface_descriptor *desc)
44 {
45 return (desc->bInterfaceClass == USB_CLASS_MISC &&
46 desc->bInterfaceSubClass == 1 &&
47 desc->bInterfaceProtocol == 1);
48 }
49
50 static int is_wireless_rndis(struct usb_interface_descriptor *desc)
51 {
52 return (desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER &&
53 desc->bInterfaceSubClass == 1 &&
54 desc->bInterfaceProtocol == 3);
55 }
56
57 #else
58
59 #define is_rndis(desc) 0
60 #define is_activesync(desc) 0
61 #define is_wireless_rndis(desc) 0
62
63 #endif
64
65 static const u8 mbm_guid[16] = {
66 0xa3, 0x17, 0xa8, 0x8b, 0x04, 0x5e, 0x4f, 0x01,
67 0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a,
68 };
69
70 static void usbnet_cdc_update_filter(struct usbnet *dev)
71 {
72 struct cdc_state *info = (void *) &dev->data;
73 struct usb_interface *intf = info->control;
74 struct net_device *net = dev->net;
75
76 u16 cdc_filter = USB_CDC_PACKET_TYPE_DIRECTED
77 | USB_CDC_PACKET_TYPE_BROADCAST;
78
79 /* filtering on the device is an optional feature and not worth
80 * the hassle so we just roughly care about snooping and if any
81 * multicast is requested, we take every multicast
82 */
83 if (net->flags & IFF_PROMISC)
84 cdc_filter |= USB_CDC_PACKET_TYPE_PROMISCUOUS;
85 if (!netdev_mc_empty(net) || (net->flags & IFF_ALLMULTI))
86 cdc_filter |= USB_CDC_PACKET_TYPE_ALL_MULTICAST;
87
88 usb_control_msg(dev->udev,
89 usb_sndctrlpipe(dev->udev, 0),
90 USB_CDC_SET_ETHERNET_PACKET_FILTER,
91 USB_TYPE_CLASS | USB_RECIP_INTERFACE,
92 cdc_filter,
93 intf->cur_altsetting->desc.bInterfaceNumber,
94 NULL,
95 0,
96 USB_CTRL_SET_TIMEOUT
97 );
98 }
99
100 /* probes control interface, claims data interface, collects the bulk
101 * endpoints, activates data interface (if needed), maybe sets MTU.
102 * all pure cdc, except for certain firmware workarounds, and knowing
103 * that rndis uses one different rule.
104 */
105 int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
106 {
107 u8 *buf = intf->cur_altsetting->extra;
108 int len = intf->cur_altsetting->extralen;
109 struct usb_interface_descriptor *d;
110 struct cdc_state *info = (void *) &dev->data;
111 int status;
112 int rndis;
113 bool android_rndis_quirk = false;
114 struct usb_driver *driver = driver_of(intf);
115 struct usb_cdc_parsed_header header;
116
117 if (sizeof(dev->data) < sizeof(*info))
118 return -EDOM;
119
120 /* expect strict spec conformance for the descriptors, but
121 * cope with firmware which stores them in the wrong place
122 */
123 if (len == 0 && dev->udev->actconfig->extralen) {
124 /* Motorola SB4100 (and others: Brad Hards says it's
125 * from a Broadcom design) put CDC descriptors here
126 */
127 buf = dev->udev->actconfig->extra;
128 len = dev->udev->actconfig->extralen;
129 dev_dbg(&intf->dev, "CDC descriptors on config\n");
130 }
131
132 /* Maybe CDC descriptors are after the endpoint? This bug has
133 * been seen on some 2Wire Inc RNDIS-ish products.
134 */
135 if (len == 0) {
136 struct usb_host_endpoint *hep;
137
138 hep = intf->cur_altsetting->endpoint;
139 if (hep) {
140 buf = hep->extra;
141 len = hep->extralen;
142 }
143 if (len)
144 dev_dbg(&intf->dev,
145 "CDC descriptors on endpoint\n");
146 }
147
148 /* this assumes that if there's a non-RNDIS vendor variant
149 * of cdc-acm, it'll fail RNDIS requests cleanly.
150 */
151 rndis = (is_rndis(&intf->cur_altsetting->desc) ||
152 is_activesync(&intf->cur_altsetting->desc) ||
153 is_wireless_rndis(&intf->cur_altsetting->desc));
154
155 memset(info, 0, sizeof(*info));
156 info->control = intf;
157
158 cdc_parse_cdc_header(&header, intf, buf, len);
159
160 info->u = header.usb_cdc_union_desc;
161 info->header = header.usb_cdc_header_desc;
162 info->ether = header.usb_cdc_ether_desc;
163 if (!info->u) {
164 if (rndis)
165 goto skip;
166 else /* in that case a quirk is mandatory */
167 goto bad_desc;
168 }
169 /* we need a master/control interface (what we're
170 * probed with) and a slave/data interface; union
171 * descriptors sort this all out.
172 */
173 info->control = usb_ifnum_to_if(dev->udev,
174 info->u->bMasterInterface0);
175 info->data = usb_ifnum_to_if(dev->udev,
176 info->u->bSlaveInterface0);
177 if (!info->control || !info->data) {
178 dev_dbg(&intf->dev,
179 "master #%u/%p slave #%u/%p\n",
180 info->u->bMasterInterface0,
181 info->control,
182 info->u->bSlaveInterface0,
183 info->data);
184 /* fall back to hard-wiring for RNDIS */
185 if (rndis) {
186 android_rndis_quirk = true;
187 goto skip;
188 }
189 goto bad_desc;
190 }
191 if (info->control != intf) {
192 dev_dbg(&intf->dev, "bogus CDC Union\n");
193 /* Ambit USB Cable Modem (and maybe others)
194 * interchanges master and slave interface.
195 */
196 if (info->data == intf) {
197 info->data = info->control;
198 info->control = intf;
199 } else
200 goto bad_desc;
201 }
202
203 /* some devices merge these - skip class check */
204 if (info->control == info->data)
205 goto skip;
206
207 /* a data interface altsetting does the real i/o */
208 d = &info->data->cur_altsetting->desc;
209 if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
210 dev_dbg(&intf->dev, "slave class %u\n",
211 d->bInterfaceClass);
212 goto bad_desc;
213 }
214 skip:
215 if ( rndis &&
216 header.usb_cdc_acm_descriptor &&
217 header.usb_cdc_acm_descriptor->bmCapabilities) {
218 dev_dbg(&intf->dev,
219 "ACM capabilities %02x, not really RNDIS?\n",
220 header.usb_cdc_acm_descriptor->bmCapabilities);
221 goto bad_desc;
222 }
223
224 if (header.usb_cdc_ether_desc) {
225 dev->hard_mtu = le16_to_cpu(info->ether->wMaxSegmentSize);
226 /* because of Zaurus, we may be ignoring the host
227 * side link address we were given.
228 */
229 }
230
231 if (header.usb_cdc_mdlm_desc &&
232 memcmp(header.usb_cdc_mdlm_desc->bGUID, mbm_guid, 16)) {
233 dev_dbg(&intf->dev, "GUID doesn't match\n");
234 goto bad_desc;
235 }
236
237 if (header.usb_cdc_mdlm_detail_desc &&
238 header.usb_cdc_mdlm_detail_desc->bLength <
239 (sizeof(struct usb_cdc_mdlm_detail_desc) + 1)) {
240 dev_dbg(&intf->dev, "Descriptor too short\n");
241 goto bad_desc;
242 }
243
244
245
246 /* Microsoft ActiveSync based and some regular RNDIS devices lack the
247 * CDC descriptors, so we'll hard-wire the interfaces and not check
248 * for descriptors.
249 *
250 * Some Android RNDIS devices have a CDC Union descriptor pointing
251 * to non-existing interfaces. Ignore that and attempt the same
252 * hard-wired 0 and 1 interfaces.
253 */
254 if (rndis && (!info->u || android_rndis_quirk)) {
255 info->control = usb_ifnum_to_if(dev->udev, 0);
256 info->data = usb_ifnum_to_if(dev->udev, 1);
257 if (!info->control || !info->data || info->control != intf) {
258 dev_dbg(&intf->dev,
259 "rndis: master #0/%p slave #1/%p\n",
260 info->control,
261 info->data);
262 goto bad_desc;
263 }
264
265 } else if (!info->header || (!rndis && !info->ether)) {
266 dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n",
267 info->header ? "" : "header ",
268 info->u ? "" : "union ",
269 info->ether ? "" : "ether ");
270 goto bad_desc;
271 }
272
273 /* claim data interface and set it up ... with side effects.
274 * network traffic can't flow until an altsetting is enabled.
275 */
276 if (info->data != info->control) {
277 status = usb_driver_claim_interface(driver, info->data, dev);
278 if (status < 0)
279 return status;
280 }
281 status = usbnet_get_endpoints(dev, info->data);
282 if (status < 0) {
283 /* ensure immediate exit from usbnet_disconnect */
284 usb_set_intfdata(info->data, NULL);
285 if (info->data != info->control)
286 usb_driver_release_interface(driver, info->data);
287 return status;
288 }
289
290 /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
291 if (info->data != info->control)
292 dev->status = NULL;
293 if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
294 struct usb_endpoint_descriptor *desc;
295
296 dev->status = &info->control->cur_altsetting->endpoint [0];
297 desc = &dev->status->desc;
298 if (!usb_endpoint_is_int_in(desc) ||
299 (le16_to_cpu(desc->wMaxPacketSize)
300 < sizeof(struct usb_cdc_notification)) ||
301 !desc->bInterval) {
302 dev_dbg(&intf->dev, "bad notification endpoint\n");
303 dev->status = NULL;
304 }
305 }
306 if (rndis && !dev->status) {
307 dev_dbg(&intf->dev, "missing RNDIS status endpoint\n");
308 usb_set_intfdata(info->data, NULL);
309 usb_driver_release_interface(driver, info->data);
310 return -ENODEV;
311 }
312
313 /* Some devices don't initialise properly. In particular
314 * the packet filter is not reset. There are devices that
315 * don't do reset all the way. So the packet filter should
316 * be set to a sane initial value.
317 */
318 usbnet_cdc_update_filter(dev);
319
320 return 0;
321
322 bad_desc:
323 dev_info(&dev->udev->dev, "bad CDC descriptors\n");
324 return -ENODEV;
325 }
326 EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
327
328 void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
329 {
330 struct cdc_state *info = (void *) &dev->data;
331 struct usb_driver *driver = driver_of(intf);
332
333 /* combined interface - nothing to do */
334 if (info->data == info->control)
335 return;
336
337 /* disconnect master --> disconnect slave */
338 if (intf == info->control && info->data) {
339 /* ensure immediate exit from usbnet_disconnect */
340 usb_set_intfdata(info->data, NULL);
341 usb_driver_release_interface(driver, info->data);
342 info->data = NULL;
343 }
344
345 /* and vice versa (just in case) */
346 else if (intf == info->data && info->control) {
347 /* ensure immediate exit from usbnet_disconnect */
348 usb_set_intfdata(info->control, NULL);
349 usb_driver_release_interface(driver, info->control);
350 info->control = NULL;
351 }
352 }
353 EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
354
355 /* Communications Device Class, Ethernet Control model
356 *
357 * Takes two interfaces. The DATA interface is inactive till an altsetting
358 * is selected. Configuration data includes class descriptors. There's
359 * an optional status endpoint on the control interface.
360 *
361 * This should interop with whatever the 2.4 "CDCEther.c" driver
362 * (by Brad Hards) talked with, with more functionality.
363 */
364
365 static void dumpspeed(struct usbnet *dev, __le32 *speeds)
366 {
367 netif_info(dev, timer, dev->net,
368 "link speeds: %u kbps up, %u kbps down\n",
369 __le32_to_cpu(speeds[0]) / 1000,
370 __le32_to_cpu(speeds[1]) / 1000);
371 }
372
373 void usbnet_cdc_status(struct usbnet *dev, struct urb *urb)
374 {
375 struct usb_cdc_notification *event;
376
377 if (urb->actual_length < sizeof(*event))
378 return;
379
380 /* SPEED_CHANGE can get split into two 8-byte packets */
381 if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
382 dumpspeed(dev, (__le32 *) urb->transfer_buffer);
383 return;
384 }
385
386 event = urb->transfer_buffer;
387 switch (event->bNotificationType) {
388 case USB_CDC_NOTIFY_NETWORK_CONNECTION:
389 netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
390 event->wValue ? "on" : "off");
391 usbnet_link_change(dev, !!event->wValue, 0);
392 break;
393 case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */
394 netif_dbg(dev, timer, dev->net, "CDC: speed change (len %d)\n",
395 urb->actual_length);
396 if (urb->actual_length != (sizeof(*event) + 8))
397 set_bit(EVENT_STS_SPLIT, &dev->flags);
398 else
399 dumpspeed(dev, (__le32 *) &event[1]);
400 break;
401 /* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS),
402 * but there are no standard formats for the response data.
403 */
404 default:
405 netdev_err(dev->net, "CDC: unexpected notification %02x!\n",
406 event->bNotificationType);
407 break;
408 }
409 }
410 EXPORT_SYMBOL_GPL(usbnet_cdc_status);
411
412 int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
413 {
414 int status;
415 struct cdc_state *info = (void *) &dev->data;
416
417 BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data)
418 < sizeof(struct cdc_state)));
419
420 status = usbnet_generic_cdc_bind(dev, intf);
421 if (status < 0)
422 return status;
423
424 status = usbnet_get_ethernet_addr(dev, info->ether->iMACAddress);
425 if (status < 0) {
426 usb_set_intfdata(info->data, NULL);
427 usb_driver_release_interface(driver_of(intf), info->data);
428 return status;
429 }
430
431 return 0;
432 }
433 EXPORT_SYMBOL_GPL(usbnet_cdc_bind);
434
435 static int usbnet_cdc_zte_bind(struct usbnet *dev, struct usb_interface *intf)
436 {
437 int status = usbnet_cdc_bind(dev, intf);
438
439 if (!status && (dev->net->dev_addr[0] & 0x02))
440 eth_hw_addr_random(dev->net);
441
442 return status;
443 }
444
445 /* Make sure packets have correct destination MAC address
446 *
447 * A firmware bug observed on some devices (ZTE MF823/831/910) is that the
448 * device sends packets with a static, bogus, random MAC address (event if
449 * device MAC address has been updated). Always set MAC address to that of the
450 * device.
451 */
452 static int usbnet_cdc_zte_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
453 {
454 if (skb->len < ETH_HLEN || !(skb->data[0] & 0x02))
455 return 1;
456
457 skb_reset_mac_header(skb);
458 ether_addr_copy(eth_hdr(skb)->h_dest, dev->net->dev_addr);
459
460 return 1;
461 }
462
463 /* Ensure correct link state
464 *
465 * Some devices (ZTE MF823/831/910) export two carrier on notifications when
466 * connected. This causes the link state to be incorrect. Work around this by
467 * always setting the state to off, then on.
468 */
469 static void usbnet_cdc_zte_status(struct usbnet *dev, struct urb *urb)
470 {
471 struct usb_cdc_notification *event;
472
473 if (urb->actual_length < sizeof(*event))
474 return;
475
476 event = urb->transfer_buffer;
477
478 if (event->bNotificationType != USB_CDC_NOTIFY_NETWORK_CONNECTION) {
479 usbnet_cdc_status(dev, urb);
480 return;
481 }
482
483 netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
484 event->wValue ? "on" : "off");
485
486 if (event->wValue &&
487 netif_carrier_ok(dev->net))
488 netif_carrier_off(dev->net);
489
490 usbnet_link_change(dev, !!event->wValue, 0);
491 }
492
493 static const struct driver_info cdc_info = {
494 .description = "CDC Ethernet Device",
495 .flags = FLAG_ETHER | FLAG_POINTTOPOINT,
496 .bind = usbnet_cdc_bind,
497 .unbind = usbnet_cdc_unbind,
498 .status = usbnet_cdc_status,
499 .set_rx_mode = usbnet_cdc_update_filter,
500 .manage_power = usbnet_manage_power,
501 };
502
503 static const struct driver_info zte_cdc_info = {
504 .description = "ZTE CDC Ethernet Device",
505 .flags = FLAG_ETHER | FLAG_POINTTOPOINT,
506 .bind = usbnet_cdc_zte_bind,
507 .unbind = usbnet_cdc_unbind,
508 .status = usbnet_cdc_zte_status,
509 .set_rx_mode = usbnet_cdc_update_filter,
510 .manage_power = usbnet_manage_power,
511 .rx_fixup = usbnet_cdc_zte_rx_fixup,
512 };
513
514 static const struct driver_info wwan_info = {
515 .description = "Mobile Broadband Network Device",
516 .flags = FLAG_WWAN,
517 .bind = usbnet_cdc_bind,
518 .unbind = usbnet_cdc_unbind,
519 .status = usbnet_cdc_status,
520 .set_rx_mode = usbnet_cdc_update_filter,
521 .manage_power = usbnet_manage_power,
522 };
523
524 /*-------------------------------------------------------------------------*/
525
526 #define HUAWEI_VENDOR_ID 0x12D1
527 #define NOVATEL_VENDOR_ID 0x1410
528 #define ZTE_VENDOR_ID 0x19D2
529 #define DELL_VENDOR_ID 0x413C
530 #define REALTEK_VENDOR_ID 0x0bda
531 #define SAMSUNG_VENDOR_ID 0x04e8
532 #define LENOVO_VENDOR_ID 0x17ef
533 #define NVIDIA_VENDOR_ID 0x0955
534 #define HP_VENDOR_ID 0x03f0
535
536 static const struct usb_device_id products[] = {
537 /* BLACKLIST !!
538 *
539 * First blacklist any products that are egregiously nonconformant
540 * with the CDC Ethernet specs. Minor braindamage we cope with; when
541 * they're not even trying, needing a separate driver is only the first
542 * of the differences to show up.
543 */
544
545 #define ZAURUS_MASTER_INTERFACE \
546 .bInterfaceClass = USB_CLASS_COMM, \
547 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
548 .bInterfaceProtocol = USB_CDC_PROTO_NONE
549
550 /* SA-1100 based Sharp Zaurus ("collie"), or compatible;
551 * wire-incompatible with true CDC Ethernet implementations.
552 * (And, it seems, needlessly so...)
553 */
554 {
555 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
556 | USB_DEVICE_ID_MATCH_DEVICE,
557 .idVendor = 0x04DD,
558 .idProduct = 0x8004,
559 ZAURUS_MASTER_INTERFACE,
560 .driver_info = 0,
561 },
562
563 /* PXA-25x based Sharp Zaurii. Note that it seems some of these
564 * (later models especially) may have shipped only with firmware
565 * advertising false "CDC MDLM" compatibility ... but we're not
566 * clear which models did that, so for now let's assume the worst.
567 */
568 {
569 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
570 | USB_DEVICE_ID_MATCH_DEVICE,
571 .idVendor = 0x04DD,
572 .idProduct = 0x8005, /* A-300 */
573 ZAURUS_MASTER_INTERFACE,
574 .driver_info = 0,
575 }, {
576 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
577 | USB_DEVICE_ID_MATCH_DEVICE,
578 .idVendor = 0x04DD,
579 .idProduct = 0x8006, /* B-500/SL-5600 */
580 ZAURUS_MASTER_INTERFACE,
581 .driver_info = 0,
582 }, {
583 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
584 | USB_DEVICE_ID_MATCH_DEVICE,
585 .idVendor = 0x04DD,
586 .idProduct = 0x8007, /* C-700 */
587 ZAURUS_MASTER_INTERFACE,
588 .driver_info = 0,
589 }, {
590 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
591 | USB_DEVICE_ID_MATCH_DEVICE,
592 .idVendor = 0x04DD,
593 .idProduct = 0x9031, /* C-750 C-760 */
594 ZAURUS_MASTER_INTERFACE,
595 .driver_info = 0,
596 }, {
597 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
598 | USB_DEVICE_ID_MATCH_DEVICE,
599 .idVendor = 0x04DD,
600 .idProduct = 0x9032, /* SL-6000 */
601 ZAURUS_MASTER_INTERFACE,
602 .driver_info = 0,
603 }, {
604 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
605 | USB_DEVICE_ID_MATCH_DEVICE,
606 .idVendor = 0x04DD,
607 /* reported with some C860 units */
608 .idProduct = 0x9050, /* C-860 */
609 ZAURUS_MASTER_INTERFACE,
610 .driver_info = 0,
611 },
612
613 /* Olympus has some models with a Zaurus-compatible option.
614 * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
615 */
616 {
617 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
618 | USB_DEVICE_ID_MATCH_DEVICE,
619 .idVendor = 0x07B4,
620 .idProduct = 0x0F02, /* R-1000 */
621 ZAURUS_MASTER_INTERFACE,
622 .driver_info = 0,
623 },
624
625 /* LG Electronics VL600 wants additional headers on every frame */
626 {
627 USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
628 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
629 .driver_info = 0,
630 },
631
632 /* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
633 {
634 USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
635 USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
636 .driver_info = 0,
637 },
638
639 /* Novatel USB551L and MC551 - handled by qmi_wwan */
640 {
641 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0xB001, USB_CLASS_COMM,
642 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
643 .driver_info = 0,
644 },
645
646 /* Novatel E362 - handled by qmi_wwan */
647 {
648 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9010, USB_CLASS_COMM,
649 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
650 .driver_info = 0,
651 },
652
653 /* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
654 {
655 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8195, USB_CLASS_COMM,
656 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
657 .driver_info = 0,
658 },
659
660 /* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
661 {
662 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8196, USB_CLASS_COMM,
663 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
664 .driver_info = 0,
665 },
666
667 /* Dell Wireless 5804 (Novatel E371) - handled by qmi_wwan */
668 {
669 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x819b, USB_CLASS_COMM,
670 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
671 .driver_info = 0,
672 },
673
674 /* Novatel Expedite E371 - handled by qmi_wwan */
675 {
676 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9011, USB_CLASS_COMM,
677 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
678 .driver_info = 0,
679 },
680
681 /* HP lt2523 (Novatel E371) - handled by qmi_wwan */
682 {
683 USB_DEVICE_AND_INTERFACE_INFO(HP_VENDOR_ID, 0x421d, USB_CLASS_COMM,
684 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
685 .driver_info = 0,
686 },
687
688 /* AnyDATA ADU960S - handled by qmi_wwan */
689 {
690 USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, USB_CLASS_COMM,
691 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
692 .driver_info = 0,
693 },
694
695 /* Huawei E1820 - handled by qmi_wwan */
696 {
697 USB_DEVICE_INTERFACE_NUMBER(HUAWEI_VENDOR_ID, 0x14ac, 1),
698 .driver_info = 0,
699 },
700
701 /* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */
702 {
703 USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM,
704 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
705 .driver_info = 0,
706 },
707
708 /* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */
709 {
710 USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM,
711 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
712 .driver_info = 0,
713 },
714
715 /* Samsung USB Ethernet Adapters */
716 {
717 USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, 0xa101, USB_CLASS_COMM,
718 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
719 .driver_info = 0,
720 },
721
722 /* ThinkPad USB-C Dock (based on Realtek RTL8153) */
723 {
724 USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x3062, USB_CLASS_COMM,
725 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
726 .driver_info = 0,
727 },
728
729 /* ThinkPad Thunderbolt 3 Dock (based on Realtek RTL8153) */
730 {
731 USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x3069, USB_CLASS_COMM,
732 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
733 .driver_info = 0,
734 },
735
736 /* Lenovo Thinkpad USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
737 {
738 USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x7205, USB_CLASS_COMM,
739 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
740 .driver_info = 0,
741 },
742
743 /* Lenovo USB C to Ethernet Adapter (based on Realtek RTL8153) */
744 {
745 USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x720c, USB_CLASS_COMM,
746 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
747 .driver_info = 0,
748 },
749
750 /* Lenovo USB-C Travel Hub (based on Realtek RTL8153) */
751 {
752 USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x7214, USB_CLASS_COMM,
753 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
754 .driver_info = 0,
755 },
756
757 /* NVIDIA Tegra USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
758 {
759 USB_DEVICE_AND_INTERFACE_INFO(NVIDIA_VENDOR_ID, 0x09ff, USB_CLASS_COMM,
760 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
761 .driver_info = 0,
762 },
763
764 /* WHITELIST!!!
765 *
766 * CDC Ether uses two interfaces, not necessarily consecutive.
767 * We match the main interface, ignoring the optional device
768 * class so we could handle devices that aren't exclusively
769 * CDC ether.
770 *
771 * NOTE: this match must come AFTER entries blacklisting devices
772 * because of bugs/quirks in a given product (like Zaurus, above).
773 */
774 {
775 /* ZTE (Vodafone) K3805-Z */
776 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1003, USB_CLASS_COMM,
777 USB_CDC_SUBCLASS_ETHERNET,
778 USB_CDC_PROTO_NONE),
779 .driver_info = (unsigned long)&wwan_info,
780 }, {
781 /* ZTE (Vodafone) K3806-Z */
782 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1015, USB_CLASS_COMM,
783 USB_CDC_SUBCLASS_ETHERNET,
784 USB_CDC_PROTO_NONE),
785 .driver_info = (unsigned long)&wwan_info,
786 }, {
787 /* ZTE (Vodafone) K4510-Z */
788 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1173, USB_CLASS_COMM,
789 USB_CDC_SUBCLASS_ETHERNET,
790 USB_CDC_PROTO_NONE),
791 .driver_info = (unsigned long)&wwan_info,
792 }, {
793 /* ZTE (Vodafone) K3770-Z */
794 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1177, USB_CLASS_COMM,
795 USB_CDC_SUBCLASS_ETHERNET,
796 USB_CDC_PROTO_NONE),
797 .driver_info = (unsigned long)&wwan_info,
798 }, {
799 /* ZTE (Vodafone) K3772-Z */
800 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1181, USB_CLASS_COMM,
801 USB_CDC_SUBCLASS_ETHERNET,
802 USB_CDC_PROTO_NONE),
803 .driver_info = (unsigned long)&wwan_info,
804 }, {
805 /* Telit modules */
806 USB_VENDOR_AND_INTERFACE_INFO(0x1bc7, USB_CLASS_COMM,
807 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
808 .driver_info = (kernel_ulong_t) &wwan_info,
809 }, {
810 /* Dell DW5580 modules */
811 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x81ba, USB_CLASS_COMM,
812 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
813 .driver_info = (kernel_ulong_t)&wwan_info,
814 }, {
815 /* ZTE modules */
816 USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, USB_CLASS_COMM,
817 USB_CDC_SUBCLASS_ETHERNET,
818 USB_CDC_PROTO_NONE),
819 .driver_info = (unsigned long)&zte_cdc_info,
820 }, {
821 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
822 USB_CDC_PROTO_NONE),
823 .driver_info = (unsigned long) &cdc_info,
824 }, {
825 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
826 USB_CDC_PROTO_NONE),
827 .driver_info = (unsigned long)&wwan_info,
828
829 }, {
830 /* Various Huawei modems with a network port like the UMG1831 */
831 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_COMM,
832 USB_CDC_SUBCLASS_ETHERNET, 255),
833 .driver_info = (unsigned long)&wwan_info,
834 },
835 { }, /* END */
836 };
837 MODULE_DEVICE_TABLE(usb, products);
838
839 static struct usb_driver cdc_driver = {
840 .name = "cdc_ether",
841 .id_table = products,
842 .probe = usbnet_probe,
843 .disconnect = usbnet_disconnect,
844 .suspend = usbnet_suspend,
845 .resume = usbnet_resume,
846 .reset_resume = usbnet_resume,
847 .supports_autosuspend = 1,
848 .disable_hub_initiated_lpm = 1,
849 };
850
851 module_usb_driver(cdc_driver);
852
853 MODULE_AUTHOR("David Brownell");
854 MODULE_DESCRIPTION("USB CDC Ethernet devices");
855 MODULE_LICENSE("GPL");