]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - drivers/net/via-rhine.c
Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
[mirror_ubuntu-artful-kernel.git] / drivers / net / via-rhine.c
1 /* via-rhine.c: A Linux Ethernet device driver for VIA Rhine family chips. */
2 /*
3 Written 1998-2001 by Donald Becker.
4
5 Current Maintainer: Roger Luethi <rl@hellgate.ch>
6
7 This software may be used and distributed according to the terms of
8 the GNU General Public License (GPL), incorporated herein by reference.
9 Drivers based on or derived from this code fall under the GPL and must
10 retain the authorship, copyright and license notice. This file is not
11 a complete program and may only be used when the entire operating
12 system is licensed under the GPL.
13
14 This driver is designed for the VIA VT86C100A Rhine-I.
15 It also works with the Rhine-II (6102) and Rhine-III (6105/6105L/6105LOM
16 and management NIC 6105M).
17
18 The author may be reached as becker@scyld.com, or C/O
19 Scyld Computing Corporation
20 410 Severn Ave., Suite 210
21 Annapolis MD 21403
22
23
24 This driver contains some changes from the original Donald Becker
25 version. He may or may not be interested in bug reports on this
26 code. You can find his versions at:
27 http://www.scyld.com/network/via-rhine.html
28 [link no longer provides useful info -jgarzik]
29
30 */
31
32 #define DRV_NAME "via-rhine"
33 #define DRV_VERSION "1.4.1"
34 #define DRV_RELDATE "July-24-2006"
35
36
37 /* A few user-configurable values.
38 These may be modified when a driver module is loaded. */
39
40 static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
41 static int max_interrupt_work = 20;
42
43 /* Set the copy breakpoint for the copy-only-tiny-frames scheme.
44 Setting to > 1518 effectively disables this feature. */
45 static int rx_copybreak;
46
47 /* Work-around for broken BIOSes: they are unable to get the chip back out of
48 power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */
49 static int avoid_D3;
50
51 /*
52 * In case you are looking for 'options[]' or 'full_duplex[]', they
53 * are gone. Use ethtool(8) instead.
54 */
55
56 /* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
57 The Rhine has a 64 element 8390-like hash table. */
58 static const int multicast_filter_limit = 32;
59
60
61 /* Operational parameters that are set at compile time. */
62
63 /* Keep the ring sizes a power of two for compile efficiency.
64 The compiler will convert <unsigned>'%'<2^N> into a bit mask.
65 Making the Tx ring too large decreases the effectiveness of channel
66 bonding and packet priority.
67 There are no ill effects from too-large receive rings. */
68 #define TX_RING_SIZE 16
69 #define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */
70 #ifdef CONFIG_VIA_RHINE_NAPI
71 #define RX_RING_SIZE 64
72 #else
73 #define RX_RING_SIZE 16
74 #endif
75
76
77 /* Operational parameters that usually are not changed. */
78
79 /* Time in jiffies before concluding the transmitter is hung. */
80 #define TX_TIMEOUT (2*HZ)
81
82 #define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
83
84 #include <linux/module.h>
85 #include <linux/moduleparam.h>
86 #include <linux/kernel.h>
87 #include <linux/string.h>
88 #include <linux/timer.h>
89 #include <linux/errno.h>
90 #include <linux/ioport.h>
91 #include <linux/slab.h>
92 #include <linux/interrupt.h>
93 #include <linux/pci.h>
94 #include <linux/dma-mapping.h>
95 #include <linux/netdevice.h>
96 #include <linux/etherdevice.h>
97 #include <linux/skbuff.h>
98 #include <linux/init.h>
99 #include <linux/delay.h>
100 #include <linux/mii.h>
101 #include <linux/ethtool.h>
102 #include <linux/crc32.h>
103 #include <linux/bitops.h>
104 #include <asm/processor.h> /* Processor type for cache alignment. */
105 #include <asm/io.h>
106 #include <asm/irq.h>
107 #include <asm/uaccess.h>
108
109 /* These identify the driver base version and may not be removed. */
110 static char version[] __devinitdata =
111 KERN_INFO DRV_NAME ".c:v1.10-LK" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker\n";
112
113 /* This driver was written to use PCI memory space. Some early versions
114 of the Rhine may only work correctly with I/O space accesses. */
115 #ifdef CONFIG_VIA_RHINE_MMIO
116 #define USE_MMIO
117 #else
118 #endif
119
120 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
121 MODULE_DESCRIPTION("VIA Rhine PCI Fast Ethernet driver");
122 MODULE_LICENSE("GPL");
123
124 module_param(max_interrupt_work, int, 0);
125 module_param(debug, int, 0);
126 module_param(rx_copybreak, int, 0);
127 module_param(avoid_D3, bool, 0);
128 MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt");
129 MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)");
130 MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
131 MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)");
132
133 /*
134 Theory of Operation
135
136 I. Board Compatibility
137
138 This driver is designed for the VIA 86c100A Rhine-II PCI Fast Ethernet
139 controller.
140
141 II. Board-specific settings
142
143 Boards with this chip are functional only in a bus-master PCI slot.
144
145 Many operational settings are loaded from the EEPROM to the Config word at
146 offset 0x78. For most of these settings, this driver assumes that they are
147 correct.
148 If this driver is compiled to use PCI memory space operations the EEPROM
149 must be configured to enable memory ops.
150
151 III. Driver operation
152
153 IIIa. Ring buffers
154
155 This driver uses two statically allocated fixed-size descriptor lists
156 formed into rings by a branch from the final descriptor to the beginning of
157 the list. The ring sizes are set at compile time by RX/TX_RING_SIZE.
158
159 IIIb/c. Transmit/Receive Structure
160
161 This driver attempts to use a zero-copy receive and transmit scheme.
162
163 Alas, all data buffers are required to start on a 32 bit boundary, so
164 the driver must often copy transmit packets into bounce buffers.
165
166 The driver allocates full frame size skbuffs for the Rx ring buffers at
167 open() time and passes the skb->data field to the chip as receive data
168 buffers. When an incoming frame is less than RX_COPYBREAK bytes long,
169 a fresh skbuff is allocated and the frame is copied to the new skbuff.
170 When the incoming frame is larger, the skbuff is passed directly up the
171 protocol stack. Buffers consumed this way are replaced by newly allocated
172 skbuffs in the last phase of rhine_rx().
173
174 The RX_COPYBREAK value is chosen to trade-off the memory wasted by
175 using a full-sized skbuff for small frames vs. the copying costs of larger
176 frames. New boards are typically used in generously configured machines
177 and the underfilled buffers have negligible impact compared to the benefit of
178 a single allocation size, so the default value of zero results in never
179 copying packets. When copying is done, the cost is usually mitigated by using
180 a combined copy/checksum routine. Copying also preloads the cache, which is
181 most useful with small frames.
182
183 Since the VIA chips are only able to transfer data to buffers on 32 bit
184 boundaries, the IP header at offset 14 in an ethernet frame isn't
185 longword aligned for further processing. Copying these unaligned buffers
186 has the beneficial effect of 16-byte aligning the IP header.
187
188 IIId. Synchronization
189
190 The driver runs as two independent, single-threaded flows of control. One
191 is the send-packet routine, which enforces single-threaded use by the
192 dev->priv->lock spinlock. The other thread is the interrupt handler, which
193 is single threaded by the hardware and interrupt handling software.
194
195 The send packet thread has partial control over the Tx ring. It locks the
196 dev->priv->lock whenever it's queuing a Tx packet. If the next slot in the ring
197 is not available it stops the transmit queue by calling netif_stop_queue.
198
199 The interrupt handler has exclusive control over the Rx ring and records stats
200 from the Tx ring. After reaping the stats, it marks the Tx queue entry as
201 empty by incrementing the dirty_tx mark. If at least half of the entries in
202 the Rx ring are available the transmit queue is woken up if it was stopped.
203
204 IV. Notes
205
206 IVb. References
207
208 Preliminary VT86C100A manual from http://www.via.com.tw/
209 http://www.scyld.com/expert/100mbps.html
210 http://www.scyld.com/expert/NWay.html
211 ftp://ftp.via.com.tw/public/lan/Products/NIC/VT86C100A/Datasheet/VT86C100A03.pdf
212 ftp://ftp.via.com.tw/public/lan/Products/NIC/VT6102/Datasheet/VT6102_021.PDF
213
214
215 IVc. Errata
216
217 The VT86C100A manual is not reliable information.
218 The 3043 chip does not handle unaligned transmit or receive buffers, resulting
219 in significant performance degradation for bounce buffer copies on transmit
220 and unaligned IP headers on receive.
221 The chip does not pad to minimum transmit length.
222
223 */
224
225
226 /* This table drives the PCI probe routines. It's mostly boilerplate in all
227 of the drivers, and will likely be provided by some future kernel.
228 Note the matching code -- the first table entry matchs all 56** cards but
229 second only the 1234 card.
230 */
231
232 enum rhine_revs {
233 VT86C100A = 0x00,
234 VTunknown0 = 0x20,
235 VT6102 = 0x40,
236 VT8231 = 0x50, /* Integrated MAC */
237 VT8233 = 0x60, /* Integrated MAC */
238 VT8235 = 0x74, /* Integrated MAC */
239 VT8237 = 0x78, /* Integrated MAC */
240 VTunknown1 = 0x7C,
241 VT6105 = 0x80,
242 VT6105_B0 = 0x83,
243 VT6105L = 0x8A,
244 VT6107 = 0x8C,
245 VTunknown2 = 0x8E,
246 VT6105M = 0x90, /* Management adapter */
247 };
248
249 enum rhine_quirks {
250 rqWOL = 0x0001, /* Wake-On-LAN support */
251 rqForceReset = 0x0002,
252 rq6patterns = 0x0040, /* 6 instead of 4 patterns for WOL */
253 rqStatusWBRace = 0x0080, /* Tx Status Writeback Error possible */
254 rqRhineI = 0x0100, /* See comment below */
255 };
256 /*
257 * rqRhineI: VT86C100A (aka Rhine-I) uses different bits to enable
258 * MMIO as well as for the collision counter and the Tx FIFO underflow
259 * indicator. In addition, Tx and Rx buffers need to 4 byte aligned.
260 */
261
262 /* Beware of PCI posted writes */
263 #define IOSYNC do { ioread8(ioaddr + StationAddr); } while (0)
264
265 static const struct pci_device_id rhine_pci_tbl[] = {
266 { 0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, }, /* VT86C100A */
267 { 0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6102 */
268 { 0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, }, /* 6105{,L,LOM} */
269 { 0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6105M */
270 { } /* terminate list */
271 };
272 MODULE_DEVICE_TABLE(pci, rhine_pci_tbl);
273
274
275 /* Offsets to the device registers. */
276 enum register_offsets {
277 StationAddr=0x00, RxConfig=0x06, TxConfig=0x07, ChipCmd=0x08,
278 ChipCmd1=0x09,
279 IntrStatus=0x0C, IntrEnable=0x0E,
280 MulticastFilter0=0x10, MulticastFilter1=0x14,
281 RxRingPtr=0x18, TxRingPtr=0x1C, GFIFOTest=0x54,
282 MIIPhyAddr=0x6C, MIIStatus=0x6D, PCIBusConfig=0x6E,
283 MIICmd=0x70, MIIRegAddr=0x71, MIIData=0x72, MACRegEEcsr=0x74,
284 ConfigA=0x78, ConfigB=0x79, ConfigC=0x7A, ConfigD=0x7B,
285 RxMissed=0x7C, RxCRCErrs=0x7E, MiscCmd=0x81,
286 StickyHW=0x83, IntrStatus2=0x84,
287 WOLcrSet=0xA0, PwcfgSet=0xA1, WOLcgSet=0xA3, WOLcrClr=0xA4,
288 WOLcrClr1=0xA6, WOLcgClr=0xA7,
289 PwrcsrSet=0xA8, PwrcsrSet1=0xA9, PwrcsrClr=0xAC, PwrcsrClr1=0xAD,
290 };
291
292 /* Bits in ConfigD */
293 enum backoff_bits {
294 BackOptional=0x01, BackModify=0x02,
295 BackCaptureEffect=0x04, BackRandom=0x08
296 };
297
298 #ifdef USE_MMIO
299 /* Registers we check that mmio and reg are the same. */
300 static const int mmio_verify_registers[] = {
301 RxConfig, TxConfig, IntrEnable, ConfigA, ConfigB, ConfigC, ConfigD,
302 0
303 };
304 #endif
305
306 /* Bits in the interrupt status/mask registers. */
307 enum intr_status_bits {
308 IntrRxDone=0x0001, IntrRxErr=0x0004, IntrRxEmpty=0x0020,
309 IntrTxDone=0x0002, IntrTxError=0x0008, IntrTxUnderrun=0x0210,
310 IntrPCIErr=0x0040,
311 IntrStatsMax=0x0080, IntrRxEarly=0x0100,
312 IntrRxOverflow=0x0400, IntrRxDropped=0x0800, IntrRxNoBuf=0x1000,
313 IntrTxAborted=0x2000, IntrLinkChange=0x4000,
314 IntrRxWakeUp=0x8000,
315 IntrNormalSummary=0x0003, IntrAbnormalSummary=0xC260,
316 IntrTxDescRace=0x080000, /* mapped from IntrStatus2 */
317 IntrTxErrSummary=0x082218,
318 };
319
320 /* Bits in WOLcrSet/WOLcrClr and PwrcsrSet/PwrcsrClr */
321 enum wol_bits {
322 WOLucast = 0x10,
323 WOLmagic = 0x20,
324 WOLbmcast = 0x30,
325 WOLlnkon = 0x40,
326 WOLlnkoff = 0x80,
327 };
328
329 /* The Rx and Tx buffer descriptors. */
330 struct rx_desc {
331 s32 rx_status;
332 u32 desc_length; /* Chain flag, Buffer/frame length */
333 u32 addr;
334 u32 next_desc;
335 };
336 struct tx_desc {
337 s32 tx_status;
338 u32 desc_length; /* Chain flag, Tx Config, Frame length */
339 u32 addr;
340 u32 next_desc;
341 };
342
343 /* Initial value for tx_desc.desc_length, Buffer size goes to bits 0-10 */
344 #define TXDESC 0x00e08000
345
346 enum rx_status_bits {
347 RxOK=0x8000, RxWholePkt=0x0300, RxErr=0x008F
348 };
349
350 /* Bits in *_desc.*_status */
351 enum desc_status_bits {
352 DescOwn=0x80000000
353 };
354
355 /* Bits in ChipCmd. */
356 enum chip_cmd_bits {
357 CmdInit=0x01, CmdStart=0x02, CmdStop=0x04, CmdRxOn=0x08,
358 CmdTxOn=0x10, Cmd1TxDemand=0x20, CmdRxDemand=0x40,
359 Cmd1EarlyRx=0x01, Cmd1EarlyTx=0x02, Cmd1FDuplex=0x04,
360 Cmd1NoTxPoll=0x08, Cmd1Reset=0x80,
361 };
362
363 struct rhine_private {
364 /* Descriptor rings */
365 struct rx_desc *rx_ring;
366 struct tx_desc *tx_ring;
367 dma_addr_t rx_ring_dma;
368 dma_addr_t tx_ring_dma;
369
370 /* The addresses of receive-in-place skbuffs. */
371 struct sk_buff *rx_skbuff[RX_RING_SIZE];
372 dma_addr_t rx_skbuff_dma[RX_RING_SIZE];
373
374 /* The saved address of a sent-in-place packet/buffer, for later free(). */
375 struct sk_buff *tx_skbuff[TX_RING_SIZE];
376 dma_addr_t tx_skbuff_dma[TX_RING_SIZE];
377
378 /* Tx bounce buffers (Rhine-I only) */
379 unsigned char *tx_buf[TX_RING_SIZE];
380 unsigned char *tx_bufs;
381 dma_addr_t tx_bufs_dma;
382
383 struct pci_dev *pdev;
384 long pioaddr;
385 struct net_device_stats stats;
386 spinlock_t lock;
387
388 /* Frequently used values: keep some adjacent for cache effect. */
389 u32 quirks;
390 struct rx_desc *rx_head_desc;
391 unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */
392 unsigned int cur_tx, dirty_tx;
393 unsigned int rx_buf_sz; /* Based on MTU+slack. */
394 u8 wolopts;
395
396 u8 tx_thresh, rx_thresh;
397
398 struct mii_if_info mii_if;
399 void __iomem *base;
400 };
401
402 static int mdio_read(struct net_device *dev, int phy_id, int location);
403 static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
404 static int rhine_open(struct net_device *dev);
405 static void rhine_tx_timeout(struct net_device *dev);
406 static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev);
407 static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
408 static void rhine_tx(struct net_device *dev);
409 static int rhine_rx(struct net_device *dev, int limit);
410 static void rhine_error(struct net_device *dev, int intr_status);
411 static void rhine_set_rx_mode(struct net_device *dev);
412 static struct net_device_stats *rhine_get_stats(struct net_device *dev);
413 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
414 static struct ethtool_ops netdev_ethtool_ops;
415 static int rhine_close(struct net_device *dev);
416 static void rhine_shutdown (struct pci_dev *pdev);
417
418 #define RHINE_WAIT_FOR(condition) do { \
419 int i=1024; \
420 while (!(condition) && --i) \
421 ; \
422 if (debug > 1 && i < 512) \
423 printk(KERN_INFO "%s: %4d cycles used @ %s:%d\n", \
424 DRV_NAME, 1024-i, __func__, __LINE__); \
425 } while(0)
426
427 static inline u32 get_intr_status(struct net_device *dev)
428 {
429 struct rhine_private *rp = netdev_priv(dev);
430 void __iomem *ioaddr = rp->base;
431 u32 intr_status;
432
433 intr_status = ioread16(ioaddr + IntrStatus);
434 /* On Rhine-II, Bit 3 indicates Tx descriptor write-back race. */
435 if (rp->quirks & rqStatusWBRace)
436 intr_status |= ioread8(ioaddr + IntrStatus2) << 16;
437 return intr_status;
438 }
439
440 /*
441 * Get power related registers into sane state.
442 * Notify user about past WOL event.
443 */
444 static void rhine_power_init(struct net_device *dev)
445 {
446 struct rhine_private *rp = netdev_priv(dev);
447 void __iomem *ioaddr = rp->base;
448 u16 wolstat;
449
450 if (rp->quirks & rqWOL) {
451 /* Make sure chip is in power state D0 */
452 iowrite8(ioread8(ioaddr + StickyHW) & 0xFC, ioaddr + StickyHW);
453
454 /* Disable "force PME-enable" */
455 iowrite8(0x80, ioaddr + WOLcgClr);
456
457 /* Clear power-event config bits (WOL) */
458 iowrite8(0xFF, ioaddr + WOLcrClr);
459 /* More recent cards can manage two additional patterns */
460 if (rp->quirks & rq6patterns)
461 iowrite8(0x03, ioaddr + WOLcrClr1);
462
463 /* Save power-event status bits */
464 wolstat = ioread8(ioaddr + PwrcsrSet);
465 if (rp->quirks & rq6patterns)
466 wolstat |= (ioread8(ioaddr + PwrcsrSet1) & 0x03) << 8;
467
468 /* Clear power-event status bits */
469 iowrite8(0xFF, ioaddr + PwrcsrClr);
470 if (rp->quirks & rq6patterns)
471 iowrite8(0x03, ioaddr + PwrcsrClr1);
472
473 if (wolstat) {
474 char *reason;
475 switch (wolstat) {
476 case WOLmagic:
477 reason = "Magic packet";
478 break;
479 case WOLlnkon:
480 reason = "Link went up";
481 break;
482 case WOLlnkoff:
483 reason = "Link went down";
484 break;
485 case WOLucast:
486 reason = "Unicast packet";
487 break;
488 case WOLbmcast:
489 reason = "Multicast/broadcast packet";
490 break;
491 default:
492 reason = "Unknown";
493 }
494 printk(KERN_INFO "%s: Woke system up. Reason: %s.\n",
495 DRV_NAME, reason);
496 }
497 }
498 }
499
500 static void rhine_chip_reset(struct net_device *dev)
501 {
502 struct rhine_private *rp = netdev_priv(dev);
503 void __iomem *ioaddr = rp->base;
504
505 iowrite8(Cmd1Reset, ioaddr + ChipCmd1);
506 IOSYNC;
507
508 if (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) {
509 printk(KERN_INFO "%s: Reset not complete yet. "
510 "Trying harder.\n", DRV_NAME);
511
512 /* Force reset */
513 if (rp->quirks & rqForceReset)
514 iowrite8(0x40, ioaddr + MiscCmd);
515
516 /* Reset can take somewhat longer (rare) */
517 RHINE_WAIT_FOR(!(ioread8(ioaddr + ChipCmd1) & Cmd1Reset));
518 }
519
520 if (debug > 1)
521 printk(KERN_INFO "%s: Reset %s.\n", dev->name,
522 (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) ?
523 "failed" : "succeeded");
524 }
525
526 #ifdef USE_MMIO
527 static void enable_mmio(long pioaddr, u32 quirks)
528 {
529 int n;
530 if (quirks & rqRhineI) {
531 /* More recent docs say that this bit is reserved ... */
532 n = inb(pioaddr + ConfigA) | 0x20;
533 outb(n, pioaddr + ConfigA);
534 } else {
535 n = inb(pioaddr + ConfigD) | 0x80;
536 outb(n, pioaddr + ConfigD);
537 }
538 }
539 #endif
540
541 /*
542 * Loads bytes 0x00-0x05, 0x6E-0x6F, 0x78-0x7B from EEPROM
543 * (plus 0x6C for Rhine-I/II)
544 */
545 static void __devinit rhine_reload_eeprom(long pioaddr, struct net_device *dev)
546 {
547 struct rhine_private *rp = netdev_priv(dev);
548 void __iomem *ioaddr = rp->base;
549
550 outb(0x20, pioaddr + MACRegEEcsr);
551 RHINE_WAIT_FOR(!(inb(pioaddr + MACRegEEcsr) & 0x20));
552
553 #ifdef USE_MMIO
554 /*
555 * Reloading from EEPROM overwrites ConfigA-D, so we must re-enable
556 * MMIO. If reloading EEPROM was done first this could be avoided, but
557 * it is not known if that still works with the "win98-reboot" problem.
558 */
559 enable_mmio(pioaddr, rp->quirks);
560 #endif
561
562 /* Turn off EEPROM-controlled wake-up (magic packet) */
563 if (rp->quirks & rqWOL)
564 iowrite8(ioread8(ioaddr + ConfigA) & 0xFC, ioaddr + ConfigA);
565
566 }
567
568 #ifdef CONFIG_NET_POLL_CONTROLLER
569 static void rhine_poll(struct net_device *dev)
570 {
571 disable_irq(dev->irq);
572 rhine_interrupt(dev->irq, (void *)dev, NULL);
573 enable_irq(dev->irq);
574 }
575 #endif
576
577 #ifdef CONFIG_VIA_RHINE_NAPI
578 static int rhine_napipoll(struct net_device *dev, int *budget)
579 {
580 struct rhine_private *rp = netdev_priv(dev);
581 void __iomem *ioaddr = rp->base;
582 int done, limit = min(dev->quota, *budget);
583
584 done = rhine_rx(dev, limit);
585 *budget -= done;
586 dev->quota -= done;
587
588 if (done < limit) {
589 netif_rx_complete(dev);
590
591 iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow |
592 IntrRxDropped | IntrRxNoBuf | IntrTxAborted |
593 IntrTxDone | IntrTxError | IntrTxUnderrun |
594 IntrPCIErr | IntrStatsMax | IntrLinkChange,
595 ioaddr + IntrEnable);
596 return 0;
597 }
598 else
599 return 1;
600 }
601 #endif
602
603 static void rhine_hw_init(struct net_device *dev, long pioaddr)
604 {
605 struct rhine_private *rp = netdev_priv(dev);
606
607 /* Reset the chip to erase previous misconfiguration. */
608 rhine_chip_reset(dev);
609
610 /* Rhine-I needs extra time to recuperate before EEPROM reload */
611 if (rp->quirks & rqRhineI)
612 msleep(5);
613
614 /* Reload EEPROM controlled bytes cleared by soft reset */
615 rhine_reload_eeprom(pioaddr, dev);
616 }
617
618 static int __devinit rhine_init_one(struct pci_dev *pdev,
619 const struct pci_device_id *ent)
620 {
621 struct net_device *dev;
622 struct rhine_private *rp;
623 int i, rc;
624 u8 pci_rev;
625 u32 quirks;
626 long pioaddr;
627 long memaddr;
628 void __iomem *ioaddr;
629 int io_size, phy_id;
630 const char *name;
631 #ifdef USE_MMIO
632 int bar = 1;
633 #else
634 int bar = 0;
635 #endif
636
637 /* when built into the kernel, we only print version if device is found */
638 #ifndef MODULE
639 static int printed_version;
640 if (!printed_version++)
641 printk(version);
642 #endif
643
644 pci_read_config_byte(pdev, PCI_REVISION_ID, &pci_rev);
645
646 io_size = 256;
647 phy_id = 0;
648 quirks = 0;
649 name = "Rhine";
650 if (pci_rev < VTunknown0) {
651 quirks = rqRhineI;
652 io_size = 128;
653 }
654 else if (pci_rev >= VT6102) {
655 quirks = rqWOL | rqForceReset;
656 if (pci_rev < VT6105) {
657 name = "Rhine II";
658 quirks |= rqStatusWBRace; /* Rhine-II exclusive */
659 }
660 else {
661 phy_id = 1; /* Integrated PHY, phy_id fixed to 1 */
662 if (pci_rev >= VT6105_B0)
663 quirks |= rq6patterns;
664 if (pci_rev < VT6105M)
665 name = "Rhine III";
666 else
667 name = "Rhine III (Management Adapter)";
668 }
669 }
670
671 rc = pci_enable_device(pdev);
672 if (rc)
673 goto err_out;
674
675 /* this should always be supported */
676 rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
677 if (rc) {
678 printk(KERN_ERR "32-bit PCI DMA addresses not supported by "
679 "the card!?\n");
680 goto err_out;
681 }
682
683 /* sanity check */
684 if ((pci_resource_len(pdev, 0) < io_size) ||
685 (pci_resource_len(pdev, 1) < io_size)) {
686 rc = -EIO;
687 printk(KERN_ERR "Insufficient PCI resources, aborting\n");
688 goto err_out;
689 }
690
691 pioaddr = pci_resource_start(pdev, 0);
692 memaddr = pci_resource_start(pdev, 1);
693
694 pci_set_master(pdev);
695
696 dev = alloc_etherdev(sizeof(struct rhine_private));
697 if (!dev) {
698 rc = -ENOMEM;
699 printk(KERN_ERR "alloc_etherdev failed\n");
700 goto err_out;
701 }
702 SET_MODULE_OWNER(dev);
703 SET_NETDEV_DEV(dev, &pdev->dev);
704
705 rp = netdev_priv(dev);
706 rp->quirks = quirks;
707 rp->pioaddr = pioaddr;
708 rp->pdev = pdev;
709
710 rc = pci_request_regions(pdev, DRV_NAME);
711 if (rc)
712 goto err_out_free_netdev;
713
714 ioaddr = pci_iomap(pdev, bar, io_size);
715 if (!ioaddr) {
716 rc = -EIO;
717 printk(KERN_ERR "ioremap failed for device %s, region 0x%X "
718 "@ 0x%lX\n", pci_name(pdev), io_size, memaddr);
719 goto err_out_free_res;
720 }
721
722 #ifdef USE_MMIO
723 enable_mmio(pioaddr, quirks);
724
725 /* Check that selected MMIO registers match the PIO ones */
726 i = 0;
727 while (mmio_verify_registers[i]) {
728 int reg = mmio_verify_registers[i++];
729 unsigned char a = inb(pioaddr+reg);
730 unsigned char b = readb(ioaddr+reg);
731 if (a != b) {
732 rc = -EIO;
733 printk(KERN_ERR "MMIO do not match PIO [%02x] "
734 "(%02x != %02x)\n", reg, a, b);
735 goto err_out_unmap;
736 }
737 }
738 #endif /* USE_MMIO */
739
740 dev->base_addr = (unsigned long)ioaddr;
741 rp->base = ioaddr;
742
743 /* Get chip registers into a sane state */
744 rhine_power_init(dev);
745 rhine_hw_init(dev, pioaddr);
746
747 for (i = 0; i < 6; i++)
748 dev->dev_addr[i] = ioread8(ioaddr + StationAddr + i);
749 memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
750
751 if (!is_valid_ether_addr(dev->perm_addr)) {
752 rc = -EIO;
753 printk(KERN_ERR "Invalid MAC address\n");
754 goto err_out_unmap;
755 }
756
757 /* For Rhine-I/II, phy_id is loaded from EEPROM */
758 if (!phy_id)
759 phy_id = ioread8(ioaddr + 0x6C);
760
761 dev->irq = pdev->irq;
762
763 spin_lock_init(&rp->lock);
764 rp->mii_if.dev = dev;
765 rp->mii_if.mdio_read = mdio_read;
766 rp->mii_if.mdio_write = mdio_write;
767 rp->mii_if.phy_id_mask = 0x1f;
768 rp->mii_if.reg_num_mask = 0x1f;
769
770 /* The chip-specific entries in the device structure. */
771 dev->open = rhine_open;
772 dev->hard_start_xmit = rhine_start_tx;
773 dev->stop = rhine_close;
774 dev->get_stats = rhine_get_stats;
775 dev->set_multicast_list = rhine_set_rx_mode;
776 dev->do_ioctl = netdev_ioctl;
777 dev->ethtool_ops = &netdev_ethtool_ops;
778 dev->tx_timeout = rhine_tx_timeout;
779 dev->watchdog_timeo = TX_TIMEOUT;
780 #ifdef CONFIG_NET_POLL_CONTROLLER
781 dev->poll_controller = rhine_poll;
782 #endif
783 #ifdef CONFIG_VIA_RHINE_NAPI
784 dev->poll = rhine_napipoll;
785 dev->weight = 64;
786 #endif
787 if (rp->quirks & rqRhineI)
788 dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
789
790 /* dev->name not defined before register_netdev()! */
791 rc = register_netdev(dev);
792 if (rc)
793 goto err_out_unmap;
794
795 printk(KERN_INFO "%s: VIA %s at 0x%lx, ",
796 dev->name, name,
797 #ifdef USE_MMIO
798 memaddr
799 #else
800 (long)ioaddr
801 #endif
802 );
803
804 for (i = 0; i < 5; i++)
805 printk("%2.2x:", dev->dev_addr[i]);
806 printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], pdev->irq);
807
808 pci_set_drvdata(pdev, dev);
809
810 {
811 u16 mii_cmd;
812 int mii_status = mdio_read(dev, phy_id, 1);
813 mii_cmd = mdio_read(dev, phy_id, MII_BMCR) & ~BMCR_ISOLATE;
814 mdio_write(dev, phy_id, MII_BMCR, mii_cmd);
815 if (mii_status != 0xffff && mii_status != 0x0000) {
816 rp->mii_if.advertising = mdio_read(dev, phy_id, 4);
817 printk(KERN_INFO "%s: MII PHY found at address "
818 "%d, status 0x%4.4x advertising %4.4x "
819 "Link %4.4x.\n", dev->name, phy_id,
820 mii_status, rp->mii_if.advertising,
821 mdio_read(dev, phy_id, 5));
822
823 /* set IFF_RUNNING */
824 if (mii_status & BMSR_LSTATUS)
825 netif_carrier_on(dev);
826 else
827 netif_carrier_off(dev);
828
829 }
830 }
831 rp->mii_if.phy_id = phy_id;
832 if (debug > 1 && avoid_D3)
833 printk(KERN_INFO "%s: No D3 power state at shutdown.\n",
834 dev->name);
835
836 return 0;
837
838 err_out_unmap:
839 pci_iounmap(pdev, ioaddr);
840 err_out_free_res:
841 pci_release_regions(pdev);
842 err_out_free_netdev:
843 free_netdev(dev);
844 err_out:
845 return rc;
846 }
847
848 static int alloc_ring(struct net_device* dev)
849 {
850 struct rhine_private *rp = netdev_priv(dev);
851 void *ring;
852 dma_addr_t ring_dma;
853
854 ring = pci_alloc_consistent(rp->pdev,
855 RX_RING_SIZE * sizeof(struct rx_desc) +
856 TX_RING_SIZE * sizeof(struct tx_desc),
857 &ring_dma);
858 if (!ring) {
859 printk(KERN_ERR "Could not allocate DMA memory.\n");
860 return -ENOMEM;
861 }
862 if (rp->quirks & rqRhineI) {
863 rp->tx_bufs = pci_alloc_consistent(rp->pdev,
864 PKT_BUF_SZ * TX_RING_SIZE,
865 &rp->tx_bufs_dma);
866 if (rp->tx_bufs == NULL) {
867 pci_free_consistent(rp->pdev,
868 RX_RING_SIZE * sizeof(struct rx_desc) +
869 TX_RING_SIZE * sizeof(struct tx_desc),
870 ring, ring_dma);
871 return -ENOMEM;
872 }
873 }
874
875 rp->rx_ring = ring;
876 rp->tx_ring = ring + RX_RING_SIZE * sizeof(struct rx_desc);
877 rp->rx_ring_dma = ring_dma;
878 rp->tx_ring_dma = ring_dma + RX_RING_SIZE * sizeof(struct rx_desc);
879
880 return 0;
881 }
882
883 static void free_ring(struct net_device* dev)
884 {
885 struct rhine_private *rp = netdev_priv(dev);
886
887 pci_free_consistent(rp->pdev,
888 RX_RING_SIZE * sizeof(struct rx_desc) +
889 TX_RING_SIZE * sizeof(struct tx_desc),
890 rp->rx_ring, rp->rx_ring_dma);
891 rp->tx_ring = NULL;
892
893 if (rp->tx_bufs)
894 pci_free_consistent(rp->pdev, PKT_BUF_SZ * TX_RING_SIZE,
895 rp->tx_bufs, rp->tx_bufs_dma);
896
897 rp->tx_bufs = NULL;
898
899 }
900
901 static void alloc_rbufs(struct net_device *dev)
902 {
903 struct rhine_private *rp = netdev_priv(dev);
904 dma_addr_t next;
905 int i;
906
907 rp->dirty_rx = rp->cur_rx = 0;
908
909 rp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
910 rp->rx_head_desc = &rp->rx_ring[0];
911 next = rp->rx_ring_dma;
912
913 /* Init the ring entries */
914 for (i = 0; i < RX_RING_SIZE; i++) {
915 rp->rx_ring[i].rx_status = 0;
916 rp->rx_ring[i].desc_length = cpu_to_le32(rp->rx_buf_sz);
917 next += sizeof(struct rx_desc);
918 rp->rx_ring[i].next_desc = cpu_to_le32(next);
919 rp->rx_skbuff[i] = NULL;
920 }
921 /* Mark the last entry as wrapping the ring. */
922 rp->rx_ring[i-1].next_desc = cpu_to_le32(rp->rx_ring_dma);
923
924 /* Fill in the Rx buffers. Handle allocation failure gracefully. */
925 for (i = 0; i < RX_RING_SIZE; i++) {
926 struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz);
927 rp->rx_skbuff[i] = skb;
928 if (skb == NULL)
929 break;
930 skb->dev = dev; /* Mark as being used by this device. */
931
932 rp->rx_skbuff_dma[i] =
933 pci_map_single(rp->pdev, skb->data, rp->rx_buf_sz,
934 PCI_DMA_FROMDEVICE);
935
936 rp->rx_ring[i].addr = cpu_to_le32(rp->rx_skbuff_dma[i]);
937 rp->rx_ring[i].rx_status = cpu_to_le32(DescOwn);
938 }
939 rp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
940 }
941
942 static void free_rbufs(struct net_device* dev)
943 {
944 struct rhine_private *rp = netdev_priv(dev);
945 int i;
946
947 /* Free all the skbuffs in the Rx queue. */
948 for (i = 0; i < RX_RING_SIZE; i++) {
949 rp->rx_ring[i].rx_status = 0;
950 rp->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
951 if (rp->rx_skbuff[i]) {
952 pci_unmap_single(rp->pdev,
953 rp->rx_skbuff_dma[i],
954 rp->rx_buf_sz, PCI_DMA_FROMDEVICE);
955 dev_kfree_skb(rp->rx_skbuff[i]);
956 }
957 rp->rx_skbuff[i] = NULL;
958 }
959 }
960
961 static void alloc_tbufs(struct net_device* dev)
962 {
963 struct rhine_private *rp = netdev_priv(dev);
964 dma_addr_t next;
965 int i;
966
967 rp->dirty_tx = rp->cur_tx = 0;
968 next = rp->tx_ring_dma;
969 for (i = 0; i < TX_RING_SIZE; i++) {
970 rp->tx_skbuff[i] = NULL;
971 rp->tx_ring[i].tx_status = 0;
972 rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC);
973 next += sizeof(struct tx_desc);
974 rp->tx_ring[i].next_desc = cpu_to_le32(next);
975 if (rp->quirks & rqRhineI)
976 rp->tx_buf[i] = &rp->tx_bufs[i * PKT_BUF_SZ];
977 }
978 rp->tx_ring[i-1].next_desc = cpu_to_le32(rp->tx_ring_dma);
979
980 }
981
982 static void free_tbufs(struct net_device* dev)
983 {
984 struct rhine_private *rp = netdev_priv(dev);
985 int i;
986
987 for (i = 0; i < TX_RING_SIZE; i++) {
988 rp->tx_ring[i].tx_status = 0;
989 rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC);
990 rp->tx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
991 if (rp->tx_skbuff[i]) {
992 if (rp->tx_skbuff_dma[i]) {
993 pci_unmap_single(rp->pdev,
994 rp->tx_skbuff_dma[i],
995 rp->tx_skbuff[i]->len,
996 PCI_DMA_TODEVICE);
997 }
998 dev_kfree_skb(rp->tx_skbuff[i]);
999 }
1000 rp->tx_skbuff[i] = NULL;
1001 rp->tx_buf[i] = NULL;
1002 }
1003 }
1004
1005 static void rhine_check_media(struct net_device *dev, unsigned int init_media)
1006 {
1007 struct rhine_private *rp = netdev_priv(dev);
1008 void __iomem *ioaddr = rp->base;
1009
1010 mii_check_media(&rp->mii_if, debug, init_media);
1011
1012 if (rp->mii_if.full_duplex)
1013 iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1FDuplex,
1014 ioaddr + ChipCmd1);
1015 else
1016 iowrite8(ioread8(ioaddr + ChipCmd1) & ~Cmd1FDuplex,
1017 ioaddr + ChipCmd1);
1018 if (debug > 1)
1019 printk(KERN_INFO "%s: force_media %d, carrier %d\n", dev->name,
1020 rp->mii_if.force_media, netif_carrier_ok(dev));
1021 }
1022
1023 /* Called after status of force_media possibly changed */
1024 static void rhine_set_carrier(struct mii_if_info *mii)
1025 {
1026 if (mii->force_media) {
1027 /* autoneg is off: Link is always assumed to be up */
1028 if (!netif_carrier_ok(mii->dev))
1029 netif_carrier_on(mii->dev);
1030 }
1031 else /* Let MMI library update carrier status */
1032 rhine_check_media(mii->dev, 0);
1033 if (debug > 1)
1034 printk(KERN_INFO "%s: force_media %d, carrier %d\n",
1035 mii->dev->name, mii->force_media,
1036 netif_carrier_ok(mii->dev));
1037 }
1038
1039 static void init_registers(struct net_device *dev)
1040 {
1041 struct rhine_private *rp = netdev_priv(dev);
1042 void __iomem *ioaddr = rp->base;
1043 int i;
1044
1045 for (i = 0; i < 6; i++)
1046 iowrite8(dev->dev_addr[i], ioaddr + StationAddr + i);
1047
1048 /* Initialize other registers. */
1049 iowrite16(0x0006, ioaddr + PCIBusConfig); /* Tune configuration??? */
1050 /* Configure initial FIFO thresholds. */
1051 iowrite8(0x20, ioaddr + TxConfig);
1052 rp->tx_thresh = 0x20;
1053 rp->rx_thresh = 0x60; /* Written in rhine_set_rx_mode(). */
1054
1055 iowrite32(rp->rx_ring_dma, ioaddr + RxRingPtr);
1056 iowrite32(rp->tx_ring_dma, ioaddr + TxRingPtr);
1057
1058 rhine_set_rx_mode(dev);
1059
1060 netif_poll_enable(dev);
1061
1062 /* Enable interrupts by setting the interrupt mask. */
1063 iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow |
1064 IntrRxDropped | IntrRxNoBuf | IntrTxAborted |
1065 IntrTxDone | IntrTxError | IntrTxUnderrun |
1066 IntrPCIErr | IntrStatsMax | IntrLinkChange,
1067 ioaddr + IntrEnable);
1068
1069 iowrite16(CmdStart | CmdTxOn | CmdRxOn | (Cmd1NoTxPoll << 8),
1070 ioaddr + ChipCmd);
1071 rhine_check_media(dev, 1);
1072 }
1073
1074 /* Enable MII link status auto-polling (required for IntrLinkChange) */
1075 static void rhine_enable_linkmon(void __iomem *ioaddr)
1076 {
1077 iowrite8(0, ioaddr + MIICmd);
1078 iowrite8(MII_BMSR, ioaddr + MIIRegAddr);
1079 iowrite8(0x80, ioaddr + MIICmd);
1080
1081 RHINE_WAIT_FOR((ioread8(ioaddr + MIIRegAddr) & 0x20));
1082
1083 iowrite8(MII_BMSR | 0x40, ioaddr + MIIRegAddr);
1084 }
1085
1086 /* Disable MII link status auto-polling (required for MDIO access) */
1087 static void rhine_disable_linkmon(void __iomem *ioaddr, u32 quirks)
1088 {
1089 iowrite8(0, ioaddr + MIICmd);
1090
1091 if (quirks & rqRhineI) {
1092 iowrite8(0x01, ioaddr + MIIRegAddr); // MII_BMSR
1093
1094 /* Can be called from ISR. Evil. */
1095 mdelay(1);
1096
1097 /* 0x80 must be set immediately before turning it off */
1098 iowrite8(0x80, ioaddr + MIICmd);
1099
1100 RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x20);
1101
1102 /* Heh. Now clear 0x80 again. */
1103 iowrite8(0, ioaddr + MIICmd);
1104 }
1105 else
1106 RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x80);
1107 }
1108
1109 /* Read and write over the MII Management Data I/O (MDIO) interface. */
1110
1111 static int mdio_read(struct net_device *dev, int phy_id, int regnum)
1112 {
1113 struct rhine_private *rp = netdev_priv(dev);
1114 void __iomem *ioaddr = rp->base;
1115 int result;
1116
1117 rhine_disable_linkmon(ioaddr, rp->quirks);
1118
1119 /* rhine_disable_linkmon already cleared MIICmd */
1120 iowrite8(phy_id, ioaddr + MIIPhyAddr);
1121 iowrite8(regnum, ioaddr + MIIRegAddr);
1122 iowrite8(0x40, ioaddr + MIICmd); /* Trigger read */
1123 RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x40));
1124 result = ioread16(ioaddr + MIIData);
1125
1126 rhine_enable_linkmon(ioaddr);
1127 return result;
1128 }
1129
1130 static void mdio_write(struct net_device *dev, int phy_id, int regnum, int value)
1131 {
1132 struct rhine_private *rp = netdev_priv(dev);
1133 void __iomem *ioaddr = rp->base;
1134
1135 rhine_disable_linkmon(ioaddr, rp->quirks);
1136
1137 /* rhine_disable_linkmon already cleared MIICmd */
1138 iowrite8(phy_id, ioaddr + MIIPhyAddr);
1139 iowrite8(regnum, ioaddr + MIIRegAddr);
1140 iowrite16(value, ioaddr + MIIData);
1141 iowrite8(0x20, ioaddr + MIICmd); /* Trigger write */
1142 RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x20));
1143
1144 rhine_enable_linkmon(ioaddr);
1145 }
1146
1147 static int rhine_open(struct net_device *dev)
1148 {
1149 struct rhine_private *rp = netdev_priv(dev);
1150 void __iomem *ioaddr = rp->base;
1151 int rc;
1152
1153 rc = request_irq(rp->pdev->irq, &rhine_interrupt, IRQF_SHARED, dev->name,
1154 dev);
1155 if (rc)
1156 return rc;
1157
1158 if (debug > 1)
1159 printk(KERN_DEBUG "%s: rhine_open() irq %d.\n",
1160 dev->name, rp->pdev->irq);
1161
1162 rc = alloc_ring(dev);
1163 if (rc) {
1164 free_irq(rp->pdev->irq, dev);
1165 return rc;
1166 }
1167 alloc_rbufs(dev);
1168 alloc_tbufs(dev);
1169 rhine_chip_reset(dev);
1170 init_registers(dev);
1171 if (debug > 2)
1172 printk(KERN_DEBUG "%s: Done rhine_open(), status %4.4x "
1173 "MII status: %4.4x.\n",
1174 dev->name, ioread16(ioaddr + ChipCmd),
1175 mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
1176
1177 netif_start_queue(dev);
1178
1179 return 0;
1180 }
1181
1182 static void rhine_tx_timeout(struct net_device *dev)
1183 {
1184 struct rhine_private *rp = netdev_priv(dev);
1185 void __iomem *ioaddr = rp->base;
1186
1187 printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status "
1188 "%4.4x, resetting...\n",
1189 dev->name, ioread16(ioaddr + IntrStatus),
1190 mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
1191
1192 /* protect against concurrent rx interrupts */
1193 disable_irq(rp->pdev->irq);
1194
1195 spin_lock(&rp->lock);
1196
1197 /* clear all descriptors */
1198 free_tbufs(dev);
1199 free_rbufs(dev);
1200 alloc_tbufs(dev);
1201 alloc_rbufs(dev);
1202
1203 /* Reinitialize the hardware. */
1204 rhine_chip_reset(dev);
1205 init_registers(dev);
1206
1207 spin_unlock(&rp->lock);
1208 enable_irq(rp->pdev->irq);
1209
1210 dev->trans_start = jiffies;
1211 rp->stats.tx_errors++;
1212 netif_wake_queue(dev);
1213 }
1214
1215 static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev)
1216 {
1217 struct rhine_private *rp = netdev_priv(dev);
1218 void __iomem *ioaddr = rp->base;
1219 unsigned entry;
1220
1221 /* Caution: the write order is important here, set the field
1222 with the "ownership" bits last. */
1223
1224 /* Calculate the next Tx descriptor entry. */
1225 entry = rp->cur_tx % TX_RING_SIZE;
1226
1227 if (skb_padto(skb, ETH_ZLEN))
1228 return 0;
1229
1230 rp->tx_skbuff[entry] = skb;
1231
1232 if ((rp->quirks & rqRhineI) &&
1233 (((unsigned long)skb->data & 3) || skb_shinfo(skb)->nr_frags != 0 || skb->ip_summed == CHECKSUM_HW)) {
1234 /* Must use alignment buffer. */
1235 if (skb->len > PKT_BUF_SZ) {
1236 /* packet too long, drop it */
1237 dev_kfree_skb(skb);
1238 rp->tx_skbuff[entry] = NULL;
1239 rp->stats.tx_dropped++;
1240 return 0;
1241 }
1242
1243 /* Padding is not copied and so must be redone. */
1244 skb_copy_and_csum_dev(skb, rp->tx_buf[entry]);
1245 if (skb->len < ETH_ZLEN)
1246 memset(rp->tx_buf[entry] + skb->len, 0,
1247 ETH_ZLEN - skb->len);
1248 rp->tx_skbuff_dma[entry] = 0;
1249 rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_bufs_dma +
1250 (rp->tx_buf[entry] -
1251 rp->tx_bufs));
1252 } else {
1253 rp->tx_skbuff_dma[entry] =
1254 pci_map_single(rp->pdev, skb->data, skb->len,
1255 PCI_DMA_TODEVICE);
1256 rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_skbuff_dma[entry]);
1257 }
1258
1259 rp->tx_ring[entry].desc_length =
1260 cpu_to_le32(TXDESC | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
1261
1262 /* lock eth irq */
1263 spin_lock_irq(&rp->lock);
1264 wmb();
1265 rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn);
1266 wmb();
1267
1268 rp->cur_tx++;
1269
1270 /* Non-x86 Todo: explicitly flush cache lines here. */
1271
1272 /* Wake the potentially-idle transmit channel */
1273 iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand,
1274 ioaddr + ChipCmd1);
1275 IOSYNC;
1276
1277 if (rp->cur_tx == rp->dirty_tx + TX_QUEUE_LEN)
1278 netif_stop_queue(dev);
1279
1280 dev->trans_start = jiffies;
1281
1282 spin_unlock_irq(&rp->lock);
1283
1284 if (debug > 4) {
1285 printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
1286 dev->name, rp->cur_tx-1, entry);
1287 }
1288 return 0;
1289 }
1290
1291 /* The interrupt handler does all of the Rx thread work and cleans up
1292 after the Tx thread. */
1293 static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *rgs)
1294 {
1295 struct net_device *dev = dev_instance;
1296 struct rhine_private *rp = netdev_priv(dev);
1297 void __iomem *ioaddr = rp->base;
1298 u32 intr_status;
1299 int boguscnt = max_interrupt_work;
1300 int handled = 0;
1301
1302 while ((intr_status = get_intr_status(dev))) {
1303 handled = 1;
1304
1305 /* Acknowledge all of the current interrupt sources ASAP. */
1306 if (intr_status & IntrTxDescRace)
1307 iowrite8(0x08, ioaddr + IntrStatus2);
1308 iowrite16(intr_status & 0xffff, ioaddr + IntrStatus);
1309 IOSYNC;
1310
1311 if (debug > 4)
1312 printk(KERN_DEBUG "%s: Interrupt, status %8.8x.\n",
1313 dev->name, intr_status);
1314
1315 if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped |
1316 IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) {
1317 #ifdef CONFIG_VIA_RHINE_NAPI
1318 iowrite16(IntrTxAborted |
1319 IntrTxDone | IntrTxError | IntrTxUnderrun |
1320 IntrPCIErr | IntrStatsMax | IntrLinkChange,
1321 ioaddr + IntrEnable);
1322
1323 netif_rx_schedule(dev);
1324 #else
1325 rhine_rx(dev, RX_RING_SIZE);
1326 #endif
1327 }
1328
1329 if (intr_status & (IntrTxErrSummary | IntrTxDone)) {
1330 if (intr_status & IntrTxErrSummary) {
1331 /* Avoid scavenging before Tx engine turned off */
1332 RHINE_WAIT_FOR(!(ioread8(ioaddr+ChipCmd) & CmdTxOn));
1333 if (debug > 2 &&
1334 ioread8(ioaddr+ChipCmd) & CmdTxOn)
1335 printk(KERN_WARNING "%s: "
1336 "rhine_interrupt() Tx engine"
1337 "still on.\n", dev->name);
1338 }
1339 rhine_tx(dev);
1340 }
1341
1342 /* Abnormal error summary/uncommon events handlers. */
1343 if (intr_status & (IntrPCIErr | IntrLinkChange |
1344 IntrStatsMax | IntrTxError | IntrTxAborted |
1345 IntrTxUnderrun | IntrTxDescRace))
1346 rhine_error(dev, intr_status);
1347
1348 if (--boguscnt < 0) {
1349 printk(KERN_WARNING "%s: Too much work at interrupt, "
1350 "status=%#8.8x.\n",
1351 dev->name, intr_status);
1352 break;
1353 }
1354 }
1355
1356 if (debug > 3)
1357 printk(KERN_DEBUG "%s: exiting interrupt, status=%8.8x.\n",
1358 dev->name, ioread16(ioaddr + IntrStatus));
1359 return IRQ_RETVAL(handled);
1360 }
1361
1362 /* This routine is logically part of the interrupt handler, but isolated
1363 for clarity. */
1364 static void rhine_tx(struct net_device *dev)
1365 {
1366 struct rhine_private *rp = netdev_priv(dev);
1367 int txstatus = 0, entry = rp->dirty_tx % TX_RING_SIZE;
1368
1369 spin_lock(&rp->lock);
1370
1371 /* find and cleanup dirty tx descriptors */
1372 while (rp->dirty_tx != rp->cur_tx) {
1373 txstatus = le32_to_cpu(rp->tx_ring[entry].tx_status);
1374 if (debug > 6)
1375 printk(KERN_DEBUG "Tx scavenge %d status %8.8x.\n",
1376 entry, txstatus);
1377 if (txstatus & DescOwn)
1378 break;
1379 if (txstatus & 0x8000) {
1380 if (debug > 1)
1381 printk(KERN_DEBUG "%s: Transmit error, "
1382 "Tx status %8.8x.\n",
1383 dev->name, txstatus);
1384 rp->stats.tx_errors++;
1385 if (txstatus & 0x0400) rp->stats.tx_carrier_errors++;
1386 if (txstatus & 0x0200) rp->stats.tx_window_errors++;
1387 if (txstatus & 0x0100) rp->stats.tx_aborted_errors++;
1388 if (txstatus & 0x0080) rp->stats.tx_heartbeat_errors++;
1389 if (((rp->quirks & rqRhineI) && txstatus & 0x0002) ||
1390 (txstatus & 0x0800) || (txstatus & 0x1000)) {
1391 rp->stats.tx_fifo_errors++;
1392 rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn);
1393 break; /* Keep the skb - we try again */
1394 }
1395 /* Transmitter restarted in 'abnormal' handler. */
1396 } else {
1397 if (rp->quirks & rqRhineI)
1398 rp->stats.collisions += (txstatus >> 3) & 0x0F;
1399 else
1400 rp->stats.collisions += txstatus & 0x0F;
1401 if (debug > 6)
1402 printk(KERN_DEBUG "collisions: %1.1x:%1.1x\n",
1403 (txstatus >> 3) & 0xF,
1404 txstatus & 0xF);
1405 rp->stats.tx_bytes += rp->tx_skbuff[entry]->len;
1406 rp->stats.tx_packets++;
1407 }
1408 /* Free the original skb. */
1409 if (rp->tx_skbuff_dma[entry]) {
1410 pci_unmap_single(rp->pdev,
1411 rp->tx_skbuff_dma[entry],
1412 rp->tx_skbuff[entry]->len,
1413 PCI_DMA_TODEVICE);
1414 }
1415 dev_kfree_skb_irq(rp->tx_skbuff[entry]);
1416 rp->tx_skbuff[entry] = NULL;
1417 entry = (++rp->dirty_tx) % TX_RING_SIZE;
1418 }
1419 if ((rp->cur_tx - rp->dirty_tx) < TX_QUEUE_LEN - 4)
1420 netif_wake_queue(dev);
1421
1422 spin_unlock(&rp->lock);
1423 }
1424
1425 /* Process up to limit frames from receive ring */
1426 static int rhine_rx(struct net_device *dev, int limit)
1427 {
1428 struct rhine_private *rp = netdev_priv(dev);
1429 int count;
1430 int entry = rp->cur_rx % RX_RING_SIZE;
1431
1432 if (debug > 4) {
1433 printk(KERN_DEBUG "%s: rhine_rx(), entry %d status %8.8x.\n",
1434 dev->name, entry,
1435 le32_to_cpu(rp->rx_head_desc->rx_status));
1436 }
1437
1438 /* If EOP is set on the next entry, it's a new packet. Send it up. */
1439 for (count = 0; count < limit; ++count) {
1440 struct rx_desc *desc = rp->rx_head_desc;
1441 u32 desc_status = le32_to_cpu(desc->rx_status);
1442 int data_size = desc_status >> 16;
1443
1444 if (desc_status & DescOwn)
1445 break;
1446
1447 if (debug > 4)
1448 printk(KERN_DEBUG "rhine_rx() status is %8.8x.\n",
1449 desc_status);
1450
1451 if ((desc_status & (RxWholePkt | RxErr)) != RxWholePkt) {
1452 if ((desc_status & RxWholePkt) != RxWholePkt) {
1453 printk(KERN_WARNING "%s: Oversized Ethernet "
1454 "frame spanned multiple buffers, entry "
1455 "%#x length %d status %8.8x!\n",
1456 dev->name, entry, data_size,
1457 desc_status);
1458 printk(KERN_WARNING "%s: Oversized Ethernet "
1459 "frame %p vs %p.\n", dev->name,
1460 rp->rx_head_desc, &rp->rx_ring[entry]);
1461 rp->stats.rx_length_errors++;
1462 } else if (desc_status & RxErr) {
1463 /* There was a error. */
1464 if (debug > 2)
1465 printk(KERN_DEBUG "rhine_rx() Rx "
1466 "error was %8.8x.\n",
1467 desc_status);
1468 rp->stats.rx_errors++;
1469 if (desc_status & 0x0030) rp->stats.rx_length_errors++;
1470 if (desc_status & 0x0048) rp->stats.rx_fifo_errors++;
1471 if (desc_status & 0x0004) rp->stats.rx_frame_errors++;
1472 if (desc_status & 0x0002) {
1473 /* this can also be updated outside the interrupt handler */
1474 spin_lock(&rp->lock);
1475 rp->stats.rx_crc_errors++;
1476 spin_unlock(&rp->lock);
1477 }
1478 }
1479 } else {
1480 struct sk_buff *skb;
1481 /* Length should omit the CRC */
1482 int pkt_len = data_size - 4;
1483
1484 /* Check if the packet is long enough to accept without
1485 copying to a minimally-sized skbuff. */
1486 if (pkt_len < rx_copybreak &&
1487 (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
1488 skb->dev = dev;
1489 skb_reserve(skb, 2); /* 16 byte align the IP header */
1490 pci_dma_sync_single_for_cpu(rp->pdev,
1491 rp->rx_skbuff_dma[entry],
1492 rp->rx_buf_sz,
1493 PCI_DMA_FROMDEVICE);
1494
1495 eth_copy_and_sum(skb,
1496 rp->rx_skbuff[entry]->data,
1497 pkt_len, 0);
1498 skb_put(skb, pkt_len);
1499 pci_dma_sync_single_for_device(rp->pdev,
1500 rp->rx_skbuff_dma[entry],
1501 rp->rx_buf_sz,
1502 PCI_DMA_FROMDEVICE);
1503 } else {
1504 skb = rp->rx_skbuff[entry];
1505 if (skb == NULL) {
1506 printk(KERN_ERR "%s: Inconsistent Rx "
1507 "descriptor chain.\n",
1508 dev->name);
1509 break;
1510 }
1511 rp->rx_skbuff[entry] = NULL;
1512 skb_put(skb, pkt_len);
1513 pci_unmap_single(rp->pdev,
1514 rp->rx_skbuff_dma[entry],
1515 rp->rx_buf_sz,
1516 PCI_DMA_FROMDEVICE);
1517 }
1518 skb->protocol = eth_type_trans(skb, dev);
1519 #ifdef CONFIG_VIA_RHINE_NAPI
1520 netif_receive_skb(skb);
1521 #else
1522 netif_rx(skb);
1523 #endif
1524 dev->last_rx = jiffies;
1525 rp->stats.rx_bytes += pkt_len;
1526 rp->stats.rx_packets++;
1527 }
1528 entry = (++rp->cur_rx) % RX_RING_SIZE;
1529 rp->rx_head_desc = &rp->rx_ring[entry];
1530 }
1531
1532 /* Refill the Rx ring buffers. */
1533 for (; rp->cur_rx - rp->dirty_rx > 0; rp->dirty_rx++) {
1534 struct sk_buff *skb;
1535 entry = rp->dirty_rx % RX_RING_SIZE;
1536 if (rp->rx_skbuff[entry] == NULL) {
1537 skb = dev_alloc_skb(rp->rx_buf_sz);
1538 rp->rx_skbuff[entry] = skb;
1539 if (skb == NULL)
1540 break; /* Better luck next round. */
1541 skb->dev = dev; /* Mark as being used by this device. */
1542 rp->rx_skbuff_dma[entry] =
1543 pci_map_single(rp->pdev, skb->data,
1544 rp->rx_buf_sz,
1545 PCI_DMA_FROMDEVICE);
1546 rp->rx_ring[entry].addr = cpu_to_le32(rp->rx_skbuff_dma[entry]);
1547 }
1548 rp->rx_ring[entry].rx_status = cpu_to_le32(DescOwn);
1549 }
1550
1551 return count;
1552 }
1553
1554 /*
1555 * Clears the "tally counters" for CRC errors and missed frames(?).
1556 * It has been reported that some chips need a write of 0 to clear
1557 * these, for others the counters are set to 1 when written to and
1558 * instead cleared when read. So we clear them both ways ...
1559 */
1560 static inline void clear_tally_counters(void __iomem *ioaddr)
1561 {
1562 iowrite32(0, ioaddr + RxMissed);
1563 ioread16(ioaddr + RxCRCErrs);
1564 ioread16(ioaddr + RxMissed);
1565 }
1566
1567 static void rhine_restart_tx(struct net_device *dev) {
1568 struct rhine_private *rp = netdev_priv(dev);
1569 void __iomem *ioaddr = rp->base;
1570 int entry = rp->dirty_tx % TX_RING_SIZE;
1571 u32 intr_status;
1572
1573 /*
1574 * If new errors occured, we need to sort them out before doing Tx.
1575 * In that case the ISR will be back here RSN anyway.
1576 */
1577 intr_status = get_intr_status(dev);
1578
1579 if ((intr_status & IntrTxErrSummary) == 0) {
1580
1581 /* We know better than the chip where it should continue. */
1582 iowrite32(rp->tx_ring_dma + entry * sizeof(struct tx_desc),
1583 ioaddr + TxRingPtr);
1584
1585 iowrite8(ioread8(ioaddr + ChipCmd) | CmdTxOn,
1586 ioaddr + ChipCmd);
1587 iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand,
1588 ioaddr + ChipCmd1);
1589 IOSYNC;
1590 }
1591 else {
1592 /* This should never happen */
1593 if (debug > 1)
1594 printk(KERN_WARNING "%s: rhine_restart_tx() "
1595 "Another error occured %8.8x.\n",
1596 dev->name, intr_status);
1597 }
1598
1599 }
1600
1601 static void rhine_error(struct net_device *dev, int intr_status)
1602 {
1603 struct rhine_private *rp = netdev_priv(dev);
1604 void __iomem *ioaddr = rp->base;
1605
1606 spin_lock(&rp->lock);
1607
1608 if (intr_status & IntrLinkChange)
1609 rhine_check_media(dev, 0);
1610 if (intr_status & IntrStatsMax) {
1611 rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
1612 rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
1613 clear_tally_counters(ioaddr);
1614 }
1615 if (intr_status & IntrTxAborted) {
1616 if (debug > 1)
1617 printk(KERN_INFO "%s: Abort %8.8x, frame dropped.\n",
1618 dev->name, intr_status);
1619 }
1620 if (intr_status & IntrTxUnderrun) {
1621 if (rp->tx_thresh < 0xE0)
1622 iowrite8(rp->tx_thresh += 0x20, ioaddr + TxConfig);
1623 if (debug > 1)
1624 printk(KERN_INFO "%s: Transmitter underrun, Tx "
1625 "threshold now %2.2x.\n",
1626 dev->name, rp->tx_thresh);
1627 }
1628 if (intr_status & IntrTxDescRace) {
1629 if (debug > 2)
1630 printk(KERN_INFO "%s: Tx descriptor write-back race.\n",
1631 dev->name);
1632 }
1633 if ((intr_status & IntrTxError) &&
1634 (intr_status & (IntrTxAborted |
1635 IntrTxUnderrun | IntrTxDescRace)) == 0) {
1636 if (rp->tx_thresh < 0xE0) {
1637 iowrite8(rp->tx_thresh += 0x20, ioaddr + TxConfig);
1638 }
1639 if (debug > 1)
1640 printk(KERN_INFO "%s: Unspecified error. Tx "
1641 "threshold now %2.2x.\n",
1642 dev->name, rp->tx_thresh);
1643 }
1644 if (intr_status & (IntrTxAborted | IntrTxUnderrun | IntrTxDescRace |
1645 IntrTxError))
1646 rhine_restart_tx(dev);
1647
1648 if (intr_status & ~(IntrLinkChange | IntrStatsMax | IntrTxUnderrun |
1649 IntrTxError | IntrTxAborted | IntrNormalSummary |
1650 IntrTxDescRace)) {
1651 if (debug > 1)
1652 printk(KERN_ERR "%s: Something Wicked happened! "
1653 "%8.8x.\n", dev->name, intr_status);
1654 }
1655
1656 spin_unlock(&rp->lock);
1657 }
1658
1659 static struct net_device_stats *rhine_get_stats(struct net_device *dev)
1660 {
1661 struct rhine_private *rp = netdev_priv(dev);
1662 void __iomem *ioaddr = rp->base;
1663 unsigned long flags;
1664
1665 spin_lock_irqsave(&rp->lock, flags);
1666 rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
1667 rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
1668 clear_tally_counters(ioaddr);
1669 spin_unlock_irqrestore(&rp->lock, flags);
1670
1671 return &rp->stats;
1672 }
1673
1674 static void rhine_set_rx_mode(struct net_device *dev)
1675 {
1676 struct rhine_private *rp = netdev_priv(dev);
1677 void __iomem *ioaddr = rp->base;
1678 u32 mc_filter[2]; /* Multicast hash filter */
1679 u8 rx_mode; /* Note: 0x02=accept runt, 0x01=accept errs */
1680
1681 if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
1682 /* Unconditionally log net taps. */
1683 printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n",
1684 dev->name);
1685 rx_mode = 0x1C;
1686 iowrite32(0xffffffff, ioaddr + MulticastFilter0);
1687 iowrite32(0xffffffff, ioaddr + MulticastFilter1);
1688 } else if ((dev->mc_count > multicast_filter_limit)
1689 || (dev->flags & IFF_ALLMULTI)) {
1690 /* Too many to match, or accept all multicasts. */
1691 iowrite32(0xffffffff, ioaddr + MulticastFilter0);
1692 iowrite32(0xffffffff, ioaddr + MulticastFilter1);
1693 rx_mode = 0x0C;
1694 } else {
1695 struct dev_mc_list *mclist;
1696 int i;
1697 memset(mc_filter, 0, sizeof(mc_filter));
1698 for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
1699 i++, mclist = mclist->next) {
1700 int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
1701
1702 mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
1703 }
1704 iowrite32(mc_filter[0], ioaddr + MulticastFilter0);
1705 iowrite32(mc_filter[1], ioaddr + MulticastFilter1);
1706 rx_mode = 0x0C;
1707 }
1708 iowrite8(rp->rx_thresh | rx_mode, ioaddr + RxConfig);
1709 }
1710
1711 static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1712 {
1713 struct rhine_private *rp = netdev_priv(dev);
1714
1715 strcpy(info->driver, DRV_NAME);
1716 strcpy(info->version, DRV_VERSION);
1717 strcpy(info->bus_info, pci_name(rp->pdev));
1718 }
1719
1720 static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1721 {
1722 struct rhine_private *rp = netdev_priv(dev);
1723 int rc;
1724
1725 spin_lock_irq(&rp->lock);
1726 rc = mii_ethtool_gset(&rp->mii_if, cmd);
1727 spin_unlock_irq(&rp->lock);
1728
1729 return rc;
1730 }
1731
1732 static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1733 {
1734 struct rhine_private *rp = netdev_priv(dev);
1735 int rc;
1736
1737 spin_lock_irq(&rp->lock);
1738 rc = mii_ethtool_sset(&rp->mii_if, cmd);
1739 spin_unlock_irq(&rp->lock);
1740 rhine_set_carrier(&rp->mii_if);
1741
1742 return rc;
1743 }
1744
1745 static int netdev_nway_reset(struct net_device *dev)
1746 {
1747 struct rhine_private *rp = netdev_priv(dev);
1748
1749 return mii_nway_restart(&rp->mii_if);
1750 }
1751
1752 static u32 netdev_get_link(struct net_device *dev)
1753 {
1754 struct rhine_private *rp = netdev_priv(dev);
1755
1756 return mii_link_ok(&rp->mii_if);
1757 }
1758
1759 static u32 netdev_get_msglevel(struct net_device *dev)
1760 {
1761 return debug;
1762 }
1763
1764 static void netdev_set_msglevel(struct net_device *dev, u32 value)
1765 {
1766 debug = value;
1767 }
1768
1769 static void rhine_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
1770 {
1771 struct rhine_private *rp = netdev_priv(dev);
1772
1773 if (!(rp->quirks & rqWOL))
1774 return;
1775
1776 spin_lock_irq(&rp->lock);
1777 wol->supported = WAKE_PHY | WAKE_MAGIC |
1778 WAKE_UCAST | WAKE_MCAST | WAKE_BCAST; /* Untested */
1779 wol->wolopts = rp->wolopts;
1780 spin_unlock_irq(&rp->lock);
1781 }
1782
1783 static int rhine_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
1784 {
1785 struct rhine_private *rp = netdev_priv(dev);
1786 u32 support = WAKE_PHY | WAKE_MAGIC |
1787 WAKE_UCAST | WAKE_MCAST | WAKE_BCAST; /* Untested */
1788
1789 if (!(rp->quirks & rqWOL))
1790 return -EINVAL;
1791
1792 if (wol->wolopts & ~support)
1793 return -EINVAL;
1794
1795 spin_lock_irq(&rp->lock);
1796 rp->wolopts = wol->wolopts;
1797 spin_unlock_irq(&rp->lock);
1798
1799 return 0;
1800 }
1801
1802 static struct ethtool_ops netdev_ethtool_ops = {
1803 .get_drvinfo = netdev_get_drvinfo,
1804 .get_settings = netdev_get_settings,
1805 .set_settings = netdev_set_settings,
1806 .nway_reset = netdev_nway_reset,
1807 .get_link = netdev_get_link,
1808 .get_msglevel = netdev_get_msglevel,
1809 .set_msglevel = netdev_set_msglevel,
1810 .get_wol = rhine_get_wol,
1811 .set_wol = rhine_set_wol,
1812 .get_sg = ethtool_op_get_sg,
1813 .get_tx_csum = ethtool_op_get_tx_csum,
1814 .get_perm_addr = ethtool_op_get_perm_addr,
1815 };
1816
1817 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1818 {
1819 struct rhine_private *rp = netdev_priv(dev);
1820 int rc;
1821
1822 if (!netif_running(dev))
1823 return -EINVAL;
1824
1825 spin_lock_irq(&rp->lock);
1826 rc = generic_mii_ioctl(&rp->mii_if, if_mii(rq), cmd, NULL);
1827 spin_unlock_irq(&rp->lock);
1828 rhine_set_carrier(&rp->mii_if);
1829
1830 return rc;
1831 }
1832
1833 static int rhine_close(struct net_device *dev)
1834 {
1835 struct rhine_private *rp = netdev_priv(dev);
1836 void __iomem *ioaddr = rp->base;
1837
1838 spin_lock_irq(&rp->lock);
1839
1840 netif_stop_queue(dev);
1841 netif_poll_disable(dev);
1842
1843 if (debug > 1)
1844 printk(KERN_DEBUG "%s: Shutting down ethercard, "
1845 "status was %4.4x.\n",
1846 dev->name, ioread16(ioaddr + ChipCmd));
1847
1848 /* Switch to loopback mode to avoid hardware races. */
1849 iowrite8(rp->tx_thresh | 0x02, ioaddr + TxConfig);
1850
1851 /* Disable interrupts by clearing the interrupt mask. */
1852 iowrite16(0x0000, ioaddr + IntrEnable);
1853
1854 /* Stop the chip's Tx and Rx processes. */
1855 iowrite16(CmdStop, ioaddr + ChipCmd);
1856
1857 spin_unlock_irq(&rp->lock);
1858
1859 free_irq(rp->pdev->irq, dev);
1860 free_rbufs(dev);
1861 free_tbufs(dev);
1862 free_ring(dev);
1863
1864 return 0;
1865 }
1866
1867
1868 static void __devexit rhine_remove_one(struct pci_dev *pdev)
1869 {
1870 struct net_device *dev = pci_get_drvdata(pdev);
1871 struct rhine_private *rp = netdev_priv(dev);
1872
1873 unregister_netdev(dev);
1874
1875 pci_iounmap(pdev, rp->base);
1876 pci_release_regions(pdev);
1877
1878 free_netdev(dev);
1879 pci_disable_device(pdev);
1880 pci_set_drvdata(pdev, NULL);
1881 }
1882
1883 static void rhine_shutdown (struct pci_dev *pdev)
1884 {
1885 struct net_device *dev = pci_get_drvdata(pdev);
1886 struct rhine_private *rp = netdev_priv(dev);
1887 void __iomem *ioaddr = rp->base;
1888
1889 if (!(rp->quirks & rqWOL))
1890 return; /* Nothing to do for non-WOL adapters */
1891
1892 rhine_power_init(dev);
1893
1894 /* Make sure we use pattern 0, 1 and not 4, 5 */
1895 if (rp->quirks & rq6patterns)
1896 iowrite8(0x04, ioaddr + 0xA7);
1897
1898 if (rp->wolopts & WAKE_MAGIC) {
1899 iowrite8(WOLmagic, ioaddr + WOLcrSet);
1900 /*
1901 * Turn EEPROM-controlled wake-up back on -- some hardware may
1902 * not cooperate otherwise.
1903 */
1904 iowrite8(ioread8(ioaddr + ConfigA) | 0x03, ioaddr + ConfigA);
1905 }
1906
1907 if (rp->wolopts & (WAKE_BCAST|WAKE_MCAST))
1908 iowrite8(WOLbmcast, ioaddr + WOLcgSet);
1909
1910 if (rp->wolopts & WAKE_PHY)
1911 iowrite8(WOLlnkon | WOLlnkoff, ioaddr + WOLcrSet);
1912
1913 if (rp->wolopts & WAKE_UCAST)
1914 iowrite8(WOLucast, ioaddr + WOLcrSet);
1915
1916 if (rp->wolopts) {
1917 /* Enable legacy WOL (for old motherboards) */
1918 iowrite8(0x01, ioaddr + PwcfgSet);
1919 iowrite8(ioread8(ioaddr + StickyHW) | 0x04, ioaddr + StickyHW);
1920 }
1921
1922 /* Hit power state D3 (sleep) */
1923 if (!avoid_D3)
1924 iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW);
1925
1926 /* TODO: Check use of pci_enable_wake() */
1927
1928 }
1929
1930 #ifdef CONFIG_PM
1931 static int rhine_suspend(struct pci_dev *pdev, pm_message_t state)
1932 {
1933 struct net_device *dev = pci_get_drvdata(pdev);
1934 struct rhine_private *rp = netdev_priv(dev);
1935 unsigned long flags;
1936
1937 if (!netif_running(dev))
1938 return 0;
1939
1940 netif_device_detach(dev);
1941 pci_save_state(pdev);
1942
1943 spin_lock_irqsave(&rp->lock, flags);
1944 rhine_shutdown(pdev);
1945 spin_unlock_irqrestore(&rp->lock, flags);
1946
1947 free_irq(dev->irq, dev);
1948 return 0;
1949 }
1950
1951 static int rhine_resume(struct pci_dev *pdev)
1952 {
1953 struct net_device *dev = pci_get_drvdata(pdev);
1954 struct rhine_private *rp = netdev_priv(dev);
1955 unsigned long flags;
1956 int ret;
1957
1958 if (!netif_running(dev))
1959 return 0;
1960
1961 if (request_irq(dev->irq, rhine_interrupt, IRQF_SHARED, dev->name, dev))
1962 printk(KERN_ERR "via-rhine %s: request_irq failed\n", dev->name);
1963
1964 ret = pci_set_power_state(pdev, PCI_D0);
1965 if (debug > 1)
1966 printk(KERN_INFO "%s: Entering power state D0 %s (%d).\n",
1967 dev->name, ret ? "failed" : "succeeded", ret);
1968
1969 pci_restore_state(pdev);
1970
1971 spin_lock_irqsave(&rp->lock, flags);
1972 #ifdef USE_MMIO
1973 enable_mmio(rp->pioaddr, rp->quirks);
1974 #endif
1975 rhine_power_init(dev);
1976 free_tbufs(dev);
1977 free_rbufs(dev);
1978 alloc_tbufs(dev);
1979 alloc_rbufs(dev);
1980 init_registers(dev);
1981 spin_unlock_irqrestore(&rp->lock, flags);
1982
1983 netif_device_attach(dev);
1984
1985 return 0;
1986 }
1987 #endif /* CONFIG_PM */
1988
1989 static struct pci_driver rhine_driver = {
1990 .name = DRV_NAME,
1991 .id_table = rhine_pci_tbl,
1992 .probe = rhine_init_one,
1993 .remove = __devexit_p(rhine_remove_one),
1994 #ifdef CONFIG_PM
1995 .suspend = rhine_suspend,
1996 .resume = rhine_resume,
1997 #endif /* CONFIG_PM */
1998 .shutdown = rhine_shutdown,
1999 };
2000
2001
2002 static int __init rhine_init(void)
2003 {
2004 /* when a module, this is printed whether or not devices are found in probe */
2005 #ifdef MODULE
2006 printk(version);
2007 #endif
2008 return pci_module_init(&rhine_driver);
2009 }
2010
2011
2012 static void __exit rhine_cleanup(void)
2013 {
2014 pci_unregister_driver(&rhine_driver);
2015 }
2016
2017
2018 module_init(rhine_init);
2019 module_exit(rhine_cleanup);