ath10k: add WOW patterns support

[mirror_ubuntu-artful-kernel.git] / drivers / net / wireless / ath / ath10k / hw.h

/*
 * Copyright (c) 2005-2011 Atheros Communications Inc.
 * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#ifndef _HW_H_
#define _HW_H_

#include "targaddrs.h"

#define ATH10K_FW_DIR                   "ath10k"

/* QCA988X 1.0 definitions (unsupported) */
#define QCA988X_HW_1_0_CHIP_ID_REV      0x0

/* QCA988X 2.0 definitions */
#define QCA988X_HW_2_0_VERSION          0x4100016c
#define QCA988X_HW_2_0_CHIP_ID_REV      0x2
#define QCA988X_HW_2_0_FW_DIR           ATH10K_FW_DIR "/QCA988X/hw2.0"
#define QCA988X_HW_2_0_FW_FILE          "firmware.bin"
#define QCA988X_HW_2_0_OTP_FILE         "otp.bin"
#define QCA988X_HW_2_0_BOARD_DATA_FILE  "board.bin"
#define QCA988X_HW_2_0_PATCH_LOAD_ADDR  0x1234

/* QCA6174 target BMI version signatures */
#define QCA6174_HW_1_0_VERSION          0x05000000
#define QCA6174_HW_1_1_VERSION          0x05000001
#define QCA6174_HW_1_3_VERSION          0x05000003
#define QCA6174_HW_2_1_VERSION          0x05010000
#define QCA6174_HW_3_0_VERSION          0x05020000
#define QCA6174_HW_3_2_VERSION          0x05030000

enum qca6174_pci_rev {
        QCA6174_PCI_REV_1_1 = 0x11,
        QCA6174_PCI_REV_1_3 = 0x13,
        QCA6174_PCI_REV_2_0 = 0x20,
        QCA6174_PCI_REV_3_0 = 0x30,
};

enum qca6174_chip_id_rev {
        QCA6174_HW_1_0_CHIP_ID_REV = 0,
        QCA6174_HW_1_1_CHIP_ID_REV = 1,
        QCA6174_HW_1_3_CHIP_ID_REV = 2,
        QCA6174_HW_2_1_CHIP_ID_REV = 4,
        QCA6174_HW_2_2_CHIP_ID_REV = 5,
        QCA6174_HW_3_0_CHIP_ID_REV = 8,
        QCA6174_HW_3_1_CHIP_ID_REV = 9,
        QCA6174_HW_3_2_CHIP_ID_REV = 10,
};

#define QCA6174_HW_2_1_FW_DIR           "ath10k/QCA6174/hw2.1"
#define QCA6174_HW_2_1_FW_FILE          "firmware.bin"
#define QCA6174_HW_2_1_OTP_FILE         "otp.bin"
#define QCA6174_HW_2_1_BOARD_DATA_FILE  "board.bin"
#define QCA6174_HW_2_1_PATCH_LOAD_ADDR  0x1234

#define QCA6174_HW_3_0_FW_DIR           "ath10k/QCA6174/hw3.0"
#define QCA6174_HW_3_0_FW_FILE          "firmware.bin"
#define QCA6174_HW_3_0_OTP_FILE         "otp.bin"
#define QCA6174_HW_3_0_BOARD_DATA_FILE  "board.bin"
#define QCA6174_HW_3_0_PATCH_LOAD_ADDR  0x1234

#define ATH10K_FW_API2_FILE             "firmware-2.bin"
#define ATH10K_FW_API3_FILE             "firmware-3.bin"

/* added support for ATH10K_FW_IE_WMI_OP_VERSION */
#define ATH10K_FW_API4_FILE             "firmware-4.bin"

#define ATH10K_FW_UTF_FILE              "utf.bin"

/* includes also the null byte */
#define ATH10K_FIRMWARE_MAGIC               "QCA-ATH10K"

#define REG_DUMP_COUNT_QCA988X 60

#define QCA988X_CAL_DATA_LEN            2116

struct ath10k_fw_ie {
        __le32 id;
        __le32 len;
        u8 data[0];
};

enum ath10k_fw_ie_type {
        ATH10K_FW_IE_FW_VERSION = 0,
        ATH10K_FW_IE_TIMESTAMP = 1,
        ATH10K_FW_IE_FEATURES = 2,
        ATH10K_FW_IE_FW_IMAGE = 3,
        ATH10K_FW_IE_OTP_IMAGE = 4,

        /* WMI "operations" interface version, 32 bit value. Supported from
         * FW API 4 and above.
         */
        ATH10K_FW_IE_WMI_OP_VERSION = 5,
};

enum ath10k_fw_wmi_op_version {
        ATH10K_FW_WMI_OP_VERSION_UNSET = 0,

        ATH10K_FW_WMI_OP_VERSION_MAIN = 1,
        ATH10K_FW_WMI_OP_VERSION_10_1 = 2,
        ATH10K_FW_WMI_OP_VERSION_10_2 = 3,
        ATH10K_FW_WMI_OP_VERSION_TLV = 4,
        ATH10K_FW_WMI_OP_VERSION_10_2_4 = 5,

        /* keep last */
        ATH10K_FW_WMI_OP_VERSION_MAX,
};

enum ath10k_hw_rev {
        ATH10K_HW_QCA988X,
        ATH10K_HW_QCA6174,
};

struct ath10k_hw_regs {
        u32 rtc_state_cold_reset_mask;
        u32 rtc_soc_base_address;
        u32 rtc_wmac_base_address;
        u32 soc_core_base_address;
        u32 ce_wrapper_base_address;
        u32 ce0_base_address;
        u32 ce1_base_address;
        u32 ce2_base_address;
        u32 ce3_base_address;
        u32 ce4_base_address;
        u32 ce5_base_address;
        u32 ce6_base_address;
        u32 ce7_base_address;
        u32 soc_reset_control_si0_rst_mask;
        u32 soc_reset_control_ce_rst_mask;
        u32 soc_chip_id_address;
        u32 scratch_3_address;
};

extern const struct ath10k_hw_regs qca988x_regs;
extern const struct ath10k_hw_regs qca6174_regs;

#define QCA_REV_988X(ar) ((ar)->hw_rev == ATH10K_HW_QCA988X)
#define QCA_REV_6174(ar) ((ar)->hw_rev == ATH10K_HW_QCA6174)

/* Known pecularities:
 *  - current FW doesn't support raw rx mode (last tested v599)
 *  - current FW dumps upon raw tx mode (last tested v599)
 *  - raw appears in nwifi decap, raw and nwifi appear in ethernet decap
 *  - raw have FCS, nwifi doesn't
 *  - ethernet frames have 802.11 header decapped and parts (base hdr, cipher
 *    param, llc/snap) are aligned to 4byte boundaries each */
enum ath10k_hw_txrx_mode {
        ATH10K_HW_TXRX_RAW = 0,
        ATH10K_HW_TXRX_NATIVE_WIFI = 1,
        ATH10K_HW_TXRX_ETHERNET = 2,

        /* Valid for HTT >= 3.0. Used for management frames in TX_FRM. */
        ATH10K_HW_TXRX_MGMT = 3,
};

enum ath10k_mcast2ucast_mode {
        ATH10K_MCAST2UCAST_DISABLED = 0,
        ATH10K_MCAST2UCAST_ENABLED = 1,
};

struct ath10k_pktlog_hdr {
        __le16 flags;
        __le16 missed_cnt;
        __le16 log_type;
        __le16 size;
        __le32 timestamp;
        u8 payload[0];
} __packed;

/* Target specific defines for MAIN firmware */
#define TARGET_NUM_VDEVS                        8
#define TARGET_NUM_PEER_AST                     2
#define TARGET_NUM_WDS_ENTRIES                  32
#define TARGET_DMA_BURST_SIZE                   0
#define TARGET_MAC_AGGR_DELIM                   0
#define TARGET_AST_SKID_LIMIT                   16
#define TARGET_NUM_STATIONS                     16
#define TARGET_NUM_PEERS                        ((TARGET_NUM_STATIONS) + \
                                                 (TARGET_NUM_VDEVS))
#define TARGET_NUM_OFFLOAD_PEERS                0
#define TARGET_NUM_OFFLOAD_REORDER_BUFS         0
#define TARGET_NUM_PEER_KEYS                    2
#define TARGET_NUM_TIDS                         ((TARGET_NUM_PEERS) * 2)
#define TARGET_TX_CHAIN_MASK                    (BIT(0) | BIT(1) | BIT(2))
#define TARGET_RX_CHAIN_MASK                    (BIT(0) | BIT(1) | BIT(2))
#define TARGET_RX_TIMEOUT_LO_PRI                100
#define TARGET_RX_TIMEOUT_HI_PRI                40

/* Native Wifi decap mode is used to align IP frames to 4-byte boundaries and
 * avoid a very expensive re-alignment in mac80211. */
#define TARGET_RX_DECAP_MODE                    ATH10K_HW_TXRX_NATIVE_WIFI

#define TARGET_SCAN_MAX_PENDING_REQS            4
#define TARGET_BMISS_OFFLOAD_MAX_VDEV           3
#define TARGET_ROAM_OFFLOAD_MAX_VDEV            3
#define TARGET_ROAM_OFFLOAD_MAX_AP_PROFILES     8
#define TARGET_GTK_OFFLOAD_MAX_VDEV             3
#define TARGET_NUM_MCAST_GROUPS                 0
#define TARGET_NUM_MCAST_TABLE_ELEMS            0
#define TARGET_MCAST2UCAST_MODE                 ATH10K_MCAST2UCAST_DISABLED
#define TARGET_TX_DBG_LOG_SIZE                  1024
#define TARGET_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 0
#define TARGET_VOW_CONFIG                       0
#define TARGET_NUM_MSDU_DESC                    (1024 + 400)
#define TARGET_MAX_FRAG_ENTRIES                 0

/* Target specific defines for 10.X firmware */
#define TARGET_10X_NUM_VDEVS                    16
#define TARGET_10X_NUM_PEER_AST                 2
#define TARGET_10X_NUM_WDS_ENTRIES              32
#define TARGET_10X_DMA_BURST_SIZE               0
#define TARGET_10X_MAC_AGGR_DELIM               0
#define TARGET_10X_AST_SKID_LIMIT               128
#define TARGET_10X_NUM_STATIONS                 128
#define TARGET_10X_NUM_PEERS                    ((TARGET_10X_NUM_STATIONS) + \
                                                 (TARGET_10X_NUM_VDEVS))
#define TARGET_10X_NUM_OFFLOAD_PEERS            0
#define TARGET_10X_NUM_OFFLOAD_REORDER_BUFS     0
#define TARGET_10X_NUM_PEER_KEYS                2
#define TARGET_10X_NUM_TIDS_MAX                 256
#define TARGET_10X_NUM_TIDS                     min((TARGET_10X_NUM_TIDS_MAX), \
                                                    (TARGET_10X_NUM_PEERS) * 2)
#define TARGET_10X_TX_CHAIN_MASK                (BIT(0) | BIT(1) | BIT(2))
#define TARGET_10X_RX_CHAIN_MASK                (BIT(0) | BIT(1) | BIT(2))
#define TARGET_10X_RX_TIMEOUT_LO_PRI            100
#define TARGET_10X_RX_TIMEOUT_HI_PRI            40
#define TARGET_10X_RX_DECAP_MODE                ATH10K_HW_TXRX_NATIVE_WIFI
#define TARGET_10X_SCAN_MAX_PENDING_REQS        4
#define TARGET_10X_BMISS_OFFLOAD_MAX_VDEV       2
#define TARGET_10X_ROAM_OFFLOAD_MAX_VDEV        2
#define TARGET_10X_ROAM_OFFLOAD_MAX_AP_PROFILES 8
#define TARGET_10X_GTK_OFFLOAD_MAX_VDEV         3
#define TARGET_10X_NUM_MCAST_GROUPS             0
#define TARGET_10X_NUM_MCAST_TABLE_ELEMS        0
#define TARGET_10X_MCAST2UCAST_MODE             ATH10K_MCAST2UCAST_DISABLED
#define TARGET_10X_TX_DBG_LOG_SIZE              1024
#define TARGET_10X_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1
#define TARGET_10X_VOW_CONFIG                   0
#define TARGET_10X_NUM_MSDU_DESC                (1024 + 400)
#define TARGET_10X_MAX_FRAG_ENTRIES             0

/* 10.2 parameters */
#define TARGET_10_2_DMA_BURST_SIZE              1

/* Target specific defines for WMI-TLV firmware */
#define TARGET_TLV_NUM_VDEVS                    3
#define TARGET_TLV_NUM_STATIONS                 32
#define TARGET_TLV_NUM_PEERS                    ((TARGET_TLV_NUM_STATIONS) + \
                                                 (TARGET_TLV_NUM_VDEVS) + \
                                                 2)
#define TARGET_TLV_NUM_TIDS                     ((TARGET_TLV_NUM_PEERS) * 2)
#define TARGET_TLV_NUM_MSDU_DESC                (1024 + 32)
#define TARGET_TLV_NUM_WOW_PATTERNS             22

/* Number of Copy Engines supported */
#define CE_COUNT 8

/*
 * Total number of PCIe MSI interrupts requested for all interrupt sources.
 * PCIe standard forces this to be a power of 2.
 * Some Host OS's limit MSI requests that can be granted to 8
 * so for now we abide by this limit and avoid requesting more
 * than that.
 */
#define MSI_NUM_REQUEST_LOG2    3
#define MSI_NUM_REQUEST         (1<<MSI_NUM_REQUEST_LOG2)

/*
 * Granted MSIs are assigned as follows:
 * Firmware uses the first
 * Remaining MSIs, if any, are used by Copy Engines
 * This mapping is known to both Target firmware and Host software.
 * It may be changed as long as Host and Target are kept in sync.
 */
/* MSI for firmware (errors, etc.) */
#define MSI_ASSIGN_FW           0

/* MSIs for Copy Engines */
#define MSI_ASSIGN_CE_INITIAL   1
#define MSI_ASSIGN_CE_MAX       7

/* as of IP3.7.1 */
#define RTC_STATE_V_ON                          3

#define RTC_STATE_COLD_RESET_MASK               ar->regs->rtc_state_cold_reset_mask
#define RTC_STATE_V_LSB                         0
#define RTC_STATE_V_MASK                        0x00000007
#define RTC_STATE_ADDRESS                       0x0000
#define PCIE_SOC_WAKE_V_MASK                    0x00000001
#define PCIE_SOC_WAKE_ADDRESS                   0x0004
#define PCIE_SOC_WAKE_RESET                     0x00000000
#define SOC_GLOBAL_RESET_ADDRESS                0x0008

#define RTC_SOC_BASE_ADDRESS                    ar->regs->rtc_soc_base_address
#define RTC_WMAC_BASE_ADDRESS                   ar->regs->rtc_wmac_base_address
#define MAC_COEX_BASE_ADDRESS                   0x00006000
#define BT_COEX_BASE_ADDRESS                    0x00007000
#define SOC_PCIE_BASE_ADDRESS                   0x00008000
#define SOC_CORE_BASE_ADDRESS                   ar->regs->soc_core_base_address
#define WLAN_UART_BASE_ADDRESS                  0x0000c000
#define WLAN_SI_BASE_ADDRESS                    0x00010000
#define WLAN_GPIO_BASE_ADDRESS                  0x00014000
#define WLAN_ANALOG_INTF_BASE_ADDRESS           0x0001c000
#define WLAN_MAC_BASE_ADDRESS                   0x00020000
#define EFUSE_BASE_ADDRESS                      0x00030000
#define FPGA_REG_BASE_ADDRESS                   0x00039000
#define WLAN_UART2_BASE_ADDRESS                 0x00054c00
#define CE_WRAPPER_BASE_ADDRESS                 ar->regs->ce_wrapper_base_address
#define CE0_BASE_ADDRESS                        ar->regs->ce0_base_address
#define CE1_BASE_ADDRESS                        ar->regs->ce1_base_address
#define CE2_BASE_ADDRESS                        ar->regs->ce2_base_address
#define CE3_BASE_ADDRESS                        ar->regs->ce3_base_address
#define CE4_BASE_ADDRESS                        ar->regs->ce4_base_address
#define CE5_BASE_ADDRESS                        ar->regs->ce5_base_address
#define CE6_BASE_ADDRESS                        ar->regs->ce6_base_address
#define CE7_BASE_ADDRESS                        ar->regs->ce7_base_address
#define DBI_BASE_ADDRESS                        0x00060000
#define WLAN_ANALOG_INTF_PCIE_BASE_ADDRESS      0x0006c000
#define PCIE_LOCAL_BASE_ADDRESS                 0x00080000

#define SOC_RESET_CONTROL_ADDRESS               0x00000000
#define SOC_RESET_CONTROL_OFFSET                0x00000000
#define SOC_RESET_CONTROL_SI0_RST_MASK          ar->regs->soc_reset_control_si0_rst_mask
#define SOC_RESET_CONTROL_CE_RST_MASK           ar->regs->soc_reset_control_ce_rst_mask
#define SOC_RESET_CONTROL_CPU_WARM_RST_MASK     0x00000040
#define SOC_CPU_CLOCK_OFFSET                    0x00000020
#define SOC_CPU_CLOCK_STANDARD_LSB              0
#define SOC_CPU_CLOCK_STANDARD_MASK             0x00000003
#define SOC_CLOCK_CONTROL_OFFSET                0x00000028
#define SOC_CLOCK_CONTROL_SI0_CLK_MASK          0x00000001
#define SOC_SYSTEM_SLEEP_OFFSET                 0x000000c4
#define SOC_LPO_CAL_OFFSET                      0x000000e0
#define SOC_LPO_CAL_ENABLE_LSB                  20
#define SOC_LPO_CAL_ENABLE_MASK                 0x00100000
#define SOC_LF_TIMER_CONTROL0_ADDRESS           0x00000050
#define SOC_LF_TIMER_CONTROL0_ENABLE_MASK       0x00000004

#define SOC_CHIP_ID_ADDRESS                     ar->regs->soc_chip_id_address
#define SOC_CHIP_ID_REV_LSB                     8
#define SOC_CHIP_ID_REV_MASK                    0x00000f00

#define WLAN_RESET_CONTROL_COLD_RST_MASK        0x00000008
#define WLAN_RESET_CONTROL_WARM_RST_MASK        0x00000004
#define WLAN_SYSTEM_SLEEP_DISABLE_LSB           0
#define WLAN_SYSTEM_SLEEP_DISABLE_MASK          0x00000001

#define WLAN_GPIO_PIN0_ADDRESS                  0x00000028
#define WLAN_GPIO_PIN0_CONFIG_MASK              0x00007800
#define WLAN_GPIO_PIN1_ADDRESS                  0x0000002c
#define WLAN_GPIO_PIN1_CONFIG_MASK              0x00007800
#define WLAN_GPIO_PIN10_ADDRESS                 0x00000050
#define WLAN_GPIO_PIN11_ADDRESS                 0x00000054
#define WLAN_GPIO_PIN12_ADDRESS                 0x00000058
#define WLAN_GPIO_PIN13_ADDRESS                 0x0000005c

#define CLOCK_GPIO_OFFSET                       0xffffffff
#define CLOCK_GPIO_BT_CLK_OUT_EN_LSB            0
#define CLOCK_GPIO_BT_CLK_OUT_EN_MASK           0

#define SI_CONFIG_OFFSET                        0x00000000
#define SI_CONFIG_BIDIR_OD_DATA_LSB             18
#define SI_CONFIG_BIDIR_OD_DATA_MASK            0x00040000
#define SI_CONFIG_I2C_LSB                       16
#define SI_CONFIG_I2C_MASK                      0x00010000
#define SI_CONFIG_POS_SAMPLE_LSB                7
#define SI_CONFIG_POS_SAMPLE_MASK               0x00000080
#define SI_CONFIG_INACTIVE_DATA_LSB             5
#define SI_CONFIG_INACTIVE_DATA_MASK            0x00000020
#define SI_CONFIG_INACTIVE_CLK_LSB              4
#define SI_CONFIG_INACTIVE_CLK_MASK             0x00000010
#define SI_CONFIG_DIVIDER_LSB                   0
#define SI_CONFIG_DIVIDER_MASK                  0x0000000f
#define SI_CS_OFFSET                            0x00000004
#define SI_CS_DONE_ERR_MASK                     0x00000400
#define SI_CS_DONE_INT_MASK                     0x00000200
#define SI_CS_START_LSB                         8
#define SI_CS_START_MASK                        0x00000100
#define SI_CS_RX_CNT_LSB                        4
#define SI_CS_RX_CNT_MASK                       0x000000f0
#define SI_CS_TX_CNT_LSB                        0
#define SI_CS_TX_CNT_MASK                       0x0000000f

#define SI_TX_DATA0_OFFSET                      0x00000008
#define SI_TX_DATA1_OFFSET                      0x0000000c
#define SI_RX_DATA0_OFFSET                      0x00000010
#define SI_RX_DATA1_OFFSET                      0x00000014

#define CORE_CTRL_CPU_INTR_MASK                 0x00002000
#define CORE_CTRL_PCIE_REG_31_MASK              0x00000800
#define CORE_CTRL_ADDRESS                       0x0000
#define PCIE_INTR_ENABLE_ADDRESS                0x0008
#define PCIE_INTR_CAUSE_ADDRESS                 0x000c
#define PCIE_INTR_CLR_ADDRESS                   0x0014
#define SCRATCH_3_ADDRESS                       ar->regs->scratch_3_address
#define CPU_INTR_ADDRESS                        0x0010

/* Firmware indications to the Host via SCRATCH_3 register. */
#define FW_INDICATOR_ADDRESS    (SOC_CORE_BASE_ADDRESS + SCRATCH_3_ADDRESS)
#define FW_IND_EVENT_PENDING                    1
#define FW_IND_INITIALIZED                      2

/* HOST_REG interrupt from firmware */
#define PCIE_INTR_FIRMWARE_MASK                 0x00000400
#define PCIE_INTR_CE_MASK_ALL                   0x0007f800

#define DRAM_BASE_ADDRESS                       0x00400000

#define MISSING 0

#define SYSTEM_SLEEP_OFFSET                     SOC_SYSTEM_SLEEP_OFFSET
#define WLAN_SYSTEM_SLEEP_OFFSET                SOC_SYSTEM_SLEEP_OFFSET
#define WLAN_RESET_CONTROL_OFFSET               SOC_RESET_CONTROL_OFFSET
#define CLOCK_CONTROL_OFFSET                    SOC_CLOCK_CONTROL_OFFSET
#define CLOCK_CONTROL_SI0_CLK_MASK              SOC_CLOCK_CONTROL_SI0_CLK_MASK
#define RESET_CONTROL_MBOX_RST_MASK             MISSING
#define RESET_CONTROL_SI0_RST_MASK              SOC_RESET_CONTROL_SI0_RST_MASK
#define GPIO_BASE_ADDRESS                       WLAN_GPIO_BASE_ADDRESS
#define GPIO_PIN0_OFFSET                        WLAN_GPIO_PIN0_ADDRESS
#define GPIO_PIN1_OFFSET                        WLAN_GPIO_PIN1_ADDRESS
#define GPIO_PIN0_CONFIG_MASK                   WLAN_GPIO_PIN0_CONFIG_MASK
#define GPIO_PIN1_CONFIG_MASK                   WLAN_GPIO_PIN1_CONFIG_MASK
#define SI_BASE_ADDRESS                         WLAN_SI_BASE_ADDRESS
#define SCRATCH_BASE_ADDRESS                    SOC_CORE_BASE_ADDRESS
#define LOCAL_SCRATCH_OFFSET                    0x18
#define CPU_CLOCK_OFFSET                        SOC_CPU_CLOCK_OFFSET
#define LPO_CAL_OFFSET                          SOC_LPO_CAL_OFFSET
#define GPIO_PIN10_OFFSET                       WLAN_GPIO_PIN10_ADDRESS
#define GPIO_PIN11_OFFSET                       WLAN_GPIO_PIN11_ADDRESS
#define GPIO_PIN12_OFFSET                       WLAN_GPIO_PIN12_ADDRESS
#define GPIO_PIN13_OFFSET                       WLAN_GPIO_PIN13_ADDRESS
#define CPU_CLOCK_STANDARD_LSB                  SOC_CPU_CLOCK_STANDARD_LSB
#define CPU_CLOCK_STANDARD_MASK                 SOC_CPU_CLOCK_STANDARD_MASK
#define LPO_CAL_ENABLE_LSB                      SOC_LPO_CAL_ENABLE_LSB
#define LPO_CAL_ENABLE_MASK                     SOC_LPO_CAL_ENABLE_MASK
#define ANALOG_INTF_BASE_ADDRESS                WLAN_ANALOG_INTF_BASE_ADDRESS
#define MBOX_BASE_ADDRESS                       MISSING
#define INT_STATUS_ENABLE_ERROR_LSB             MISSING
#define INT_STATUS_ENABLE_ERROR_MASK            MISSING
#define INT_STATUS_ENABLE_CPU_LSB               MISSING
#define INT_STATUS_ENABLE_CPU_MASK              MISSING
#define INT_STATUS_ENABLE_COUNTER_LSB           MISSING
#define INT_STATUS_ENABLE_COUNTER_MASK          MISSING
#define INT_STATUS_ENABLE_MBOX_DATA_LSB         MISSING
#define INT_STATUS_ENABLE_MBOX_DATA_MASK        MISSING
#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB    MISSING
#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK   MISSING
#define ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB     MISSING
#define ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK    MISSING
#define COUNTER_INT_STATUS_ENABLE_BIT_LSB       MISSING
#define COUNTER_INT_STATUS_ENABLE_BIT_MASK      MISSING
#define INT_STATUS_ENABLE_ADDRESS               MISSING
#define CPU_INT_STATUS_ENABLE_BIT_LSB           MISSING
#define CPU_INT_STATUS_ENABLE_BIT_MASK          MISSING
#define HOST_INT_STATUS_ADDRESS                 MISSING
#define CPU_INT_STATUS_ADDRESS                  MISSING
#define ERROR_INT_STATUS_ADDRESS                MISSING
#define ERROR_INT_STATUS_WAKEUP_MASK            MISSING
#define ERROR_INT_STATUS_WAKEUP_LSB             MISSING
#define ERROR_INT_STATUS_RX_UNDERFLOW_MASK      MISSING
#define ERROR_INT_STATUS_RX_UNDERFLOW_LSB       MISSING
#define ERROR_INT_STATUS_TX_OVERFLOW_MASK       MISSING
#define ERROR_INT_STATUS_TX_OVERFLOW_LSB        MISSING
#define COUNT_DEC_ADDRESS                       MISSING
#define HOST_INT_STATUS_CPU_MASK                MISSING
#define HOST_INT_STATUS_CPU_LSB                 MISSING
#define HOST_INT_STATUS_ERROR_MASK              MISSING
#define HOST_INT_STATUS_ERROR_LSB               MISSING
#define HOST_INT_STATUS_COUNTER_MASK            MISSING
#define HOST_INT_STATUS_COUNTER_LSB             MISSING
#define RX_LOOKAHEAD_VALID_ADDRESS              MISSING
#define WINDOW_DATA_ADDRESS                     MISSING
#define WINDOW_READ_ADDR_ADDRESS                MISSING
#define WINDOW_WRITE_ADDR_ADDRESS               MISSING

#define RTC_STATE_V_GET(x) (((x) & RTC_STATE_V_MASK) >> RTC_STATE_V_LSB)

#endif /* _HW_H_ */