2 * Copyright (c) 2005-2011 Atheros Communications Inc.
3 * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
5 * Permission to use, copy, modify, and/or distribute this software for any
6 * purpose with or without fee is hereby granted, provided that the above
7 * copyright notice and this permission notice appear in all copies.
9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
20 #include <net/mac80211.h>
21 #include <linux/etherdevice.h>
39 static struct ieee80211_rate ath10k_rates
[] = {
41 .hw_value
= ATH10K_HW_RATE_CCK_LP_1M
},
43 .hw_value
= ATH10K_HW_RATE_CCK_LP_2M
,
44 .hw_value_short
= ATH10K_HW_RATE_CCK_SP_2M
,
45 .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
47 .hw_value
= ATH10K_HW_RATE_CCK_LP_5_5M
,
48 .hw_value_short
= ATH10K_HW_RATE_CCK_SP_5_5M
,
49 .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
51 .hw_value
= ATH10K_HW_RATE_CCK_LP_11M
,
52 .hw_value_short
= ATH10K_HW_RATE_CCK_SP_11M
,
53 .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
55 { .bitrate
= 60, .hw_value
= ATH10K_HW_RATE_OFDM_6M
},
56 { .bitrate
= 90, .hw_value
= ATH10K_HW_RATE_OFDM_9M
},
57 { .bitrate
= 120, .hw_value
= ATH10K_HW_RATE_OFDM_12M
},
58 { .bitrate
= 180, .hw_value
= ATH10K_HW_RATE_OFDM_18M
},
59 { .bitrate
= 240, .hw_value
= ATH10K_HW_RATE_OFDM_24M
},
60 { .bitrate
= 360, .hw_value
= ATH10K_HW_RATE_OFDM_36M
},
61 { .bitrate
= 480, .hw_value
= ATH10K_HW_RATE_OFDM_48M
},
62 { .bitrate
= 540, .hw_value
= ATH10K_HW_RATE_OFDM_54M
},
65 static struct ieee80211_rate ath10k_rates_rev2
[] = {
67 .hw_value
= ATH10K_HW_RATE_REV2_CCK_LP_1M
},
69 .hw_value
= ATH10K_HW_RATE_REV2_CCK_LP_2M
,
70 .hw_value_short
= ATH10K_HW_RATE_REV2_CCK_SP_2M
,
71 .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
73 .hw_value
= ATH10K_HW_RATE_REV2_CCK_LP_5_5M
,
74 .hw_value_short
= ATH10K_HW_RATE_REV2_CCK_SP_5_5M
,
75 .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
77 .hw_value
= ATH10K_HW_RATE_REV2_CCK_LP_11M
,
78 .hw_value_short
= ATH10K_HW_RATE_REV2_CCK_SP_11M
,
79 .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
81 { .bitrate
= 60, .hw_value
= ATH10K_HW_RATE_OFDM_6M
},
82 { .bitrate
= 90, .hw_value
= ATH10K_HW_RATE_OFDM_9M
},
83 { .bitrate
= 120, .hw_value
= ATH10K_HW_RATE_OFDM_12M
},
84 { .bitrate
= 180, .hw_value
= ATH10K_HW_RATE_OFDM_18M
},
85 { .bitrate
= 240, .hw_value
= ATH10K_HW_RATE_OFDM_24M
},
86 { .bitrate
= 360, .hw_value
= ATH10K_HW_RATE_OFDM_36M
},
87 { .bitrate
= 480, .hw_value
= ATH10K_HW_RATE_OFDM_48M
},
88 { .bitrate
= 540, .hw_value
= ATH10K_HW_RATE_OFDM_54M
},
91 #define ATH10K_MAC_FIRST_OFDM_RATE_IDX 4
93 #define ath10k_a_rates (ath10k_rates + ATH10K_MAC_FIRST_OFDM_RATE_IDX)
94 #define ath10k_a_rates_size (ARRAY_SIZE(ath10k_rates) - \
95 ATH10K_MAC_FIRST_OFDM_RATE_IDX)
96 #define ath10k_g_rates (ath10k_rates + 0)
97 #define ath10k_g_rates_size (ARRAY_SIZE(ath10k_rates))
99 #define ath10k_g_rates_rev2 (ath10k_rates_rev2 + 0)
100 #define ath10k_g_rates_rev2_size (ARRAY_SIZE(ath10k_rates_rev2))
102 static bool ath10k_mac_bitrate_is_cck(int bitrate
)
115 static u8
ath10k_mac_bitrate_to_rate(int bitrate
)
117 return DIV_ROUND_UP(bitrate
, 5) |
118 (ath10k_mac_bitrate_is_cck(bitrate
) ? BIT(7) : 0);
121 u8
ath10k_mac_hw_rate_to_idx(const struct ieee80211_supported_band
*sband
,
122 u8 hw_rate
, bool cck
)
124 const struct ieee80211_rate
*rate
;
127 for (i
= 0; i
< sband
->n_bitrates
; i
++) {
128 rate
= &sband
->bitrates
[i
];
130 if (ath10k_mac_bitrate_is_cck(rate
->bitrate
) != cck
)
133 if (rate
->hw_value
== hw_rate
)
135 else if (rate
->flags
& IEEE80211_RATE_SHORT_PREAMBLE
&&
136 rate
->hw_value_short
== hw_rate
)
143 u8
ath10k_mac_bitrate_to_idx(const struct ieee80211_supported_band
*sband
,
148 for (i
= 0; i
< sband
->n_bitrates
; i
++)
149 if (sband
->bitrates
[i
].bitrate
== bitrate
)
155 static int ath10k_mac_get_max_vht_mcs_map(u16 mcs_map
, int nss
)
157 switch ((mcs_map
>> (2 * nss
)) & 0x3) {
158 case IEEE80211_VHT_MCS_SUPPORT_0_7
: return BIT(8) - 1;
159 case IEEE80211_VHT_MCS_SUPPORT_0_8
: return BIT(9) - 1;
160 case IEEE80211_VHT_MCS_SUPPORT_0_9
: return BIT(10) - 1;
166 ath10k_mac_max_ht_nss(const u8 ht_mcs_mask
[IEEE80211_HT_MCS_MASK_LEN
])
170 for (nss
= IEEE80211_HT_MCS_MASK_LEN
- 1; nss
>= 0; nss
--)
171 if (ht_mcs_mask
[nss
])
178 ath10k_mac_max_vht_nss(const u16 vht_mcs_mask
[NL80211_VHT_NSS_MAX
])
182 for (nss
= NL80211_VHT_NSS_MAX
- 1; nss
>= 0; nss
--)
183 if (vht_mcs_mask
[nss
])
189 int ath10k_mac_ext_resource_config(struct ath10k
*ar
, u32 val
)
191 enum wmi_host_platform_type platform_type
;
194 if (test_bit(WMI_SERVICE_TX_MODE_DYNAMIC
, ar
->wmi
.svc_map
))
195 platform_type
= WMI_HOST_PLATFORM_LOW_PERF
;
197 platform_type
= WMI_HOST_PLATFORM_HIGH_PERF
;
199 ret
= ath10k_wmi_ext_resource_config(ar
, platform_type
, val
);
201 if (ret
&& ret
!= -EOPNOTSUPP
) {
202 ath10k_warn(ar
, "failed to configure ext resource: %d\n", ret
);
213 static int ath10k_send_key(struct ath10k_vif
*arvif
,
214 struct ieee80211_key_conf
*key
,
215 enum set_key_cmd cmd
,
216 const u8
*macaddr
, u32 flags
)
218 struct ath10k
*ar
= arvif
->ar
;
219 struct wmi_vdev_install_key_arg arg
= {
220 .vdev_id
= arvif
->vdev_id
,
221 .key_idx
= key
->keyidx
,
222 .key_len
= key
->keylen
,
223 .key_data
= key
->key
,
228 lockdep_assert_held(&arvif
->ar
->conf_mutex
);
230 switch (key
->cipher
) {
231 case WLAN_CIPHER_SUITE_CCMP
:
232 arg
.key_cipher
= WMI_CIPHER_AES_CCM
;
233 key
->flags
|= IEEE80211_KEY_FLAG_GENERATE_IV_MGMT
;
235 case WLAN_CIPHER_SUITE_TKIP
:
236 arg
.key_cipher
= WMI_CIPHER_TKIP
;
237 arg
.key_txmic_len
= 8;
238 arg
.key_rxmic_len
= 8;
240 case WLAN_CIPHER_SUITE_WEP40
:
241 case WLAN_CIPHER_SUITE_WEP104
:
242 arg
.key_cipher
= WMI_CIPHER_WEP
;
244 case WLAN_CIPHER_SUITE_AES_CMAC
:
248 ath10k_warn(ar
, "cipher %d is not supported\n", key
->cipher
);
252 if (test_bit(ATH10K_FLAG_RAW_MODE
, &ar
->dev_flags
))
253 key
->flags
|= IEEE80211_KEY_FLAG_GENERATE_IV
;
255 if (cmd
== DISABLE_KEY
) {
256 arg
.key_cipher
= WMI_CIPHER_NONE
;
260 return ath10k_wmi_vdev_install_key(arvif
->ar
, &arg
);
263 static int ath10k_install_key(struct ath10k_vif
*arvif
,
264 struct ieee80211_key_conf
*key
,
265 enum set_key_cmd cmd
,
266 const u8
*macaddr
, u32 flags
)
268 struct ath10k
*ar
= arvif
->ar
;
270 unsigned long time_left
;
272 lockdep_assert_held(&ar
->conf_mutex
);
274 reinit_completion(&ar
->install_key_done
);
276 if (arvif
->nohwcrypt
)
279 ret
= ath10k_send_key(arvif
, key
, cmd
, macaddr
, flags
);
283 time_left
= wait_for_completion_timeout(&ar
->install_key_done
, 3 * HZ
);
290 static int ath10k_install_peer_wep_keys(struct ath10k_vif
*arvif
,
293 struct ath10k
*ar
= arvif
->ar
;
294 struct ath10k_peer
*peer
;
299 lockdep_assert_held(&ar
->conf_mutex
);
301 if (WARN_ON(arvif
->vif
->type
!= NL80211_IFTYPE_AP
&&
302 arvif
->vif
->type
!= NL80211_IFTYPE_ADHOC
&&
303 arvif
->vif
->type
!= NL80211_IFTYPE_MESH_POINT
))
306 spin_lock_bh(&ar
->data_lock
);
307 peer
= ath10k_peer_find(ar
, arvif
->vdev_id
, addr
);
308 spin_unlock_bh(&ar
->data_lock
);
313 for (i
= 0; i
< ARRAY_SIZE(arvif
->wep_keys
); i
++) {
314 if (arvif
->wep_keys
[i
] == NULL
)
317 switch (arvif
->vif
->type
) {
318 case NL80211_IFTYPE_AP
:
319 flags
= WMI_KEY_PAIRWISE
;
321 if (arvif
->def_wep_key_idx
== i
)
322 flags
|= WMI_KEY_TX_USAGE
;
324 ret
= ath10k_install_key(arvif
, arvif
->wep_keys
[i
],
325 SET_KEY
, addr
, flags
);
329 case NL80211_IFTYPE_ADHOC
:
330 ret
= ath10k_install_key(arvif
, arvif
->wep_keys
[i
],
336 ret
= ath10k_install_key(arvif
, arvif
->wep_keys
[i
],
337 SET_KEY
, addr
, WMI_KEY_GROUP
);
346 spin_lock_bh(&ar
->data_lock
);
347 peer
->keys
[i
] = arvif
->wep_keys
[i
];
348 spin_unlock_bh(&ar
->data_lock
);
351 /* In some cases (notably with static WEP IBSS with multiple keys)
352 * multicast Tx becomes broken. Both pairwise and groupwise keys are
353 * installed already. Using WMI_KEY_TX_USAGE in different combinations
354 * didn't seem help. Using def_keyid vdev parameter seems to be
355 * effective so use that.
357 * FIXME: Revisit. Perhaps this can be done in a less hacky way.
359 if (arvif
->vif
->type
!= NL80211_IFTYPE_ADHOC
)
362 if (arvif
->def_wep_key_idx
== -1)
365 ret
= ath10k_wmi_vdev_set_param(arvif
->ar
,
367 arvif
->ar
->wmi
.vdev_param
->def_keyid
,
368 arvif
->def_wep_key_idx
);
370 ath10k_warn(ar
, "failed to re-set def wpa key idxon vdev %i: %d\n",
371 arvif
->vdev_id
, ret
);
378 static int ath10k_clear_peer_keys(struct ath10k_vif
*arvif
,
381 struct ath10k
*ar
= arvif
->ar
;
382 struct ath10k_peer
*peer
;
388 lockdep_assert_held(&ar
->conf_mutex
);
390 spin_lock_bh(&ar
->data_lock
);
391 peer
= ath10k_peer_find(ar
, arvif
->vdev_id
, addr
);
392 spin_unlock_bh(&ar
->data_lock
);
397 for (i
= 0; i
< ARRAY_SIZE(peer
->keys
); i
++) {
398 if (peer
->keys
[i
] == NULL
)
401 /* key flags are not required to delete the key */
402 ret
= ath10k_install_key(arvif
, peer
->keys
[i
],
403 DISABLE_KEY
, addr
, flags
);
404 if (ret
< 0 && first_errno
== 0)
408 ath10k_warn(ar
, "failed to remove peer wep key %d: %d\n",
411 spin_lock_bh(&ar
->data_lock
);
412 peer
->keys
[i
] = NULL
;
413 spin_unlock_bh(&ar
->data_lock
);
419 bool ath10k_mac_is_peer_wep_key_set(struct ath10k
*ar
, const u8
*addr
,
422 struct ath10k_peer
*peer
;
425 lockdep_assert_held(&ar
->data_lock
);
427 /* We don't know which vdev this peer belongs to,
428 * since WMI doesn't give us that information.
430 * FIXME: multi-bss needs to be handled.
432 peer
= ath10k_peer_find(ar
, 0, addr
);
436 for (i
= 0; i
< ARRAY_SIZE(peer
->keys
); i
++) {
437 if (peer
->keys
[i
] && peer
->keys
[i
]->keyidx
== keyidx
)
444 static int ath10k_clear_vdev_key(struct ath10k_vif
*arvif
,
445 struct ieee80211_key_conf
*key
)
447 struct ath10k
*ar
= arvif
->ar
;
448 struct ath10k_peer
*peer
;
455 lockdep_assert_held(&ar
->conf_mutex
);
458 /* since ath10k_install_key we can't hold data_lock all the
459 * time, so we try to remove the keys incrementally */
460 spin_lock_bh(&ar
->data_lock
);
462 list_for_each_entry(peer
, &ar
->peers
, list
) {
463 for (i
= 0; i
< ARRAY_SIZE(peer
->keys
); i
++) {
464 if (peer
->keys
[i
] == key
) {
465 ether_addr_copy(addr
, peer
->addr
);
466 peer
->keys
[i
] = NULL
;
471 if (i
< ARRAY_SIZE(peer
->keys
))
474 spin_unlock_bh(&ar
->data_lock
);
476 if (i
== ARRAY_SIZE(peer
->keys
))
478 /* key flags are not required to delete the key */
479 ret
= ath10k_install_key(arvif
, key
, DISABLE_KEY
, addr
, flags
);
480 if (ret
< 0 && first_errno
== 0)
484 ath10k_warn(ar
, "failed to remove key for %pM: %d\n",
491 static int ath10k_mac_vif_update_wep_key(struct ath10k_vif
*arvif
,
492 struct ieee80211_key_conf
*key
)
494 struct ath10k
*ar
= arvif
->ar
;
495 struct ath10k_peer
*peer
;
498 lockdep_assert_held(&ar
->conf_mutex
);
500 list_for_each_entry(peer
, &ar
->peers
, list
) {
501 if (ether_addr_equal(peer
->addr
, arvif
->vif
->addr
))
504 if (ether_addr_equal(peer
->addr
, arvif
->bssid
))
507 if (peer
->keys
[key
->keyidx
] == key
)
510 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac vif vdev %i update key %i needs update\n",
511 arvif
->vdev_id
, key
->keyidx
);
513 ret
= ath10k_install_peer_wep_keys(arvif
, peer
->addr
);
515 ath10k_warn(ar
, "failed to update wep keys on vdev %i for peer %pM: %d\n",
516 arvif
->vdev_id
, peer
->addr
, ret
);
524 /*********************/
525 /* General utilities */
526 /*********************/
528 static inline enum wmi_phy_mode
529 chan_to_phymode(const struct cfg80211_chan_def
*chandef
)
531 enum wmi_phy_mode phymode
= MODE_UNKNOWN
;
533 switch (chandef
->chan
->band
) {
534 case NL80211_BAND_2GHZ
:
535 switch (chandef
->width
) {
536 case NL80211_CHAN_WIDTH_20_NOHT
:
537 if (chandef
->chan
->flags
& IEEE80211_CHAN_NO_OFDM
)
542 case NL80211_CHAN_WIDTH_20
:
543 phymode
= MODE_11NG_HT20
;
545 case NL80211_CHAN_WIDTH_40
:
546 phymode
= MODE_11NG_HT40
;
548 case NL80211_CHAN_WIDTH_5
:
549 case NL80211_CHAN_WIDTH_10
:
550 case NL80211_CHAN_WIDTH_80
:
551 case NL80211_CHAN_WIDTH_80P80
:
552 case NL80211_CHAN_WIDTH_160
:
553 phymode
= MODE_UNKNOWN
;
557 case NL80211_BAND_5GHZ
:
558 switch (chandef
->width
) {
559 case NL80211_CHAN_WIDTH_20_NOHT
:
562 case NL80211_CHAN_WIDTH_20
:
563 phymode
= MODE_11NA_HT20
;
565 case NL80211_CHAN_WIDTH_40
:
566 phymode
= MODE_11NA_HT40
;
568 case NL80211_CHAN_WIDTH_80
:
569 phymode
= MODE_11AC_VHT80
;
571 case NL80211_CHAN_WIDTH_5
:
572 case NL80211_CHAN_WIDTH_10
:
573 case NL80211_CHAN_WIDTH_80P80
:
574 case NL80211_CHAN_WIDTH_160
:
575 phymode
= MODE_UNKNOWN
;
583 WARN_ON(phymode
== MODE_UNKNOWN
);
587 static u8
ath10k_parse_mpdudensity(u8 mpdudensity
)
590 * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
591 * 0 for no restriction
600 switch (mpdudensity
) {
606 /* Our lower layer calculations limit our precision to
622 int ath10k_mac_vif_chan(struct ieee80211_vif
*vif
,
623 struct cfg80211_chan_def
*def
)
625 struct ieee80211_chanctx_conf
*conf
;
628 conf
= rcu_dereference(vif
->chanctx_conf
);
640 static void ath10k_mac_num_chanctxs_iter(struct ieee80211_hw
*hw
,
641 struct ieee80211_chanctx_conf
*conf
,
649 static int ath10k_mac_num_chanctxs(struct ath10k
*ar
)
653 ieee80211_iter_chan_contexts_atomic(ar
->hw
,
654 ath10k_mac_num_chanctxs_iter
,
661 ath10k_mac_get_any_chandef_iter(struct ieee80211_hw
*hw
,
662 struct ieee80211_chanctx_conf
*conf
,
665 struct cfg80211_chan_def
**def
= data
;
670 static int ath10k_peer_create(struct ath10k
*ar
,
671 struct ieee80211_vif
*vif
,
672 struct ieee80211_sta
*sta
,
675 enum wmi_peer_type peer_type
)
677 struct ath10k_vif
*arvif
;
678 struct ath10k_peer
*peer
;
682 lockdep_assert_held(&ar
->conf_mutex
);
684 num_peers
= ar
->num_peers
;
686 /* Each vdev consumes a peer entry as well */
687 list_for_each_entry(arvif
, &ar
->arvifs
, list
)
690 if (num_peers
>= ar
->max_num_peers
)
693 ret
= ath10k_wmi_peer_create(ar
, vdev_id
, addr
, peer_type
);
695 ath10k_warn(ar
, "failed to create wmi peer %pM on vdev %i: %i\n",
700 ret
= ath10k_wait_for_peer_created(ar
, vdev_id
, addr
);
702 ath10k_warn(ar
, "failed to wait for created wmi peer %pM on vdev %i: %i\n",
707 spin_lock_bh(&ar
->data_lock
);
709 peer
= ath10k_peer_find(ar
, vdev_id
, addr
);
711 spin_unlock_bh(&ar
->data_lock
);
712 ath10k_warn(ar
, "failed to find peer %pM on vdev %i after creation\n",
714 ath10k_wmi_peer_delete(ar
, vdev_id
, addr
);
721 spin_unlock_bh(&ar
->data_lock
);
728 static int ath10k_mac_set_kickout(struct ath10k_vif
*arvif
)
730 struct ath10k
*ar
= arvif
->ar
;
734 param
= ar
->wmi
.pdev_param
->sta_kickout_th
;
735 ret
= ath10k_wmi_pdev_set_param(ar
, param
,
736 ATH10K_KICKOUT_THRESHOLD
);
738 ath10k_warn(ar
, "failed to set kickout threshold on vdev %i: %d\n",
739 arvif
->vdev_id
, ret
);
743 param
= ar
->wmi
.vdev_param
->ap_keepalive_min_idle_inactive_time_secs
;
744 ret
= ath10k_wmi_vdev_set_param(ar
, arvif
->vdev_id
, param
,
745 ATH10K_KEEPALIVE_MIN_IDLE
);
747 ath10k_warn(ar
, "failed to set keepalive minimum idle time on vdev %i: %d\n",
748 arvif
->vdev_id
, ret
);
752 param
= ar
->wmi
.vdev_param
->ap_keepalive_max_idle_inactive_time_secs
;
753 ret
= ath10k_wmi_vdev_set_param(ar
, arvif
->vdev_id
, param
,
754 ATH10K_KEEPALIVE_MAX_IDLE
);
756 ath10k_warn(ar
, "failed to set keepalive maximum idle time on vdev %i: %d\n",
757 arvif
->vdev_id
, ret
);
761 param
= ar
->wmi
.vdev_param
->ap_keepalive_max_unresponsive_time_secs
;
762 ret
= ath10k_wmi_vdev_set_param(ar
, arvif
->vdev_id
, param
,
763 ATH10K_KEEPALIVE_MAX_UNRESPONSIVE
);
765 ath10k_warn(ar
, "failed to set keepalive maximum unresponsive time on vdev %i: %d\n",
766 arvif
->vdev_id
, ret
);
773 static int ath10k_mac_set_rts(struct ath10k_vif
*arvif
, u32 value
)
775 struct ath10k
*ar
= arvif
->ar
;
778 vdev_param
= ar
->wmi
.vdev_param
->rts_threshold
;
779 return ath10k_wmi_vdev_set_param(ar
, arvif
->vdev_id
, vdev_param
, value
);
782 static int ath10k_peer_delete(struct ath10k
*ar
, u32 vdev_id
, const u8
*addr
)
786 lockdep_assert_held(&ar
->conf_mutex
);
788 ret
= ath10k_wmi_peer_delete(ar
, vdev_id
, addr
);
792 ret
= ath10k_wait_for_peer_deleted(ar
, vdev_id
, addr
);
801 static void ath10k_peer_cleanup(struct ath10k
*ar
, u32 vdev_id
)
803 struct ath10k_peer
*peer
, *tmp
;
807 lockdep_assert_held(&ar
->conf_mutex
);
809 spin_lock_bh(&ar
->data_lock
);
810 list_for_each_entry_safe(peer
, tmp
, &ar
->peers
, list
) {
811 if (peer
->vdev_id
!= vdev_id
)
814 ath10k_warn(ar
, "removing stale peer %pM from vdev_id %d\n",
815 peer
->addr
, vdev_id
);
817 for_each_set_bit(peer_id
, peer
->peer_ids
,
818 ATH10K_MAX_NUM_PEER_IDS
) {
819 ar
->peer_map
[peer_id
] = NULL
;
822 /* Double check that peer is properly un-referenced from
825 for (i
= 0; i
< ARRAY_SIZE(ar
->peer_map
); i
++) {
826 if (ar
->peer_map
[i
] == peer
) {
827 ath10k_warn(ar
, "removing stale peer_map entry for %pM (ptr %pK idx %d)\n",
828 peer
->addr
, peer
, i
);
829 ar
->peer_map
[i
] = NULL
;
833 list_del(&peer
->list
);
837 spin_unlock_bh(&ar
->data_lock
);
840 static void ath10k_peer_cleanup_all(struct ath10k
*ar
)
842 struct ath10k_peer
*peer
, *tmp
;
845 lockdep_assert_held(&ar
->conf_mutex
);
847 spin_lock_bh(&ar
->data_lock
);
848 list_for_each_entry_safe(peer
, tmp
, &ar
->peers
, list
) {
849 list_del(&peer
->list
);
853 for (i
= 0; i
< ARRAY_SIZE(ar
->peer_map
); i
++)
854 ar
->peer_map
[i
] = NULL
;
856 spin_unlock_bh(&ar
->data_lock
);
859 ar
->num_stations
= 0;
862 static int ath10k_mac_tdls_peer_update(struct ath10k
*ar
, u32 vdev_id
,
863 struct ieee80211_sta
*sta
,
864 enum wmi_tdls_peer_state state
)
867 struct wmi_tdls_peer_update_cmd_arg arg
= {};
868 struct wmi_tdls_peer_capab_arg cap
= {};
869 struct wmi_channel_arg chan_arg
= {};
871 lockdep_assert_held(&ar
->conf_mutex
);
873 arg
.vdev_id
= vdev_id
;
874 arg
.peer_state
= state
;
875 ether_addr_copy(arg
.addr
, sta
->addr
);
877 cap
.peer_max_sp
= sta
->max_sp
;
878 cap
.peer_uapsd_queues
= sta
->uapsd_queues
;
880 if (state
== WMI_TDLS_PEER_STATE_CONNECTED
&&
881 !sta
->tdls_initiator
)
882 cap
.is_peer_responder
= 1;
884 ret
= ath10k_wmi_tdls_peer_update(ar
, &arg
, &cap
, &chan_arg
);
886 ath10k_warn(ar
, "failed to update tdls peer %pM on vdev %i: %i\n",
887 arg
.addr
, vdev_id
, ret
);
894 /************************/
895 /* Interface management */
896 /************************/
898 void ath10k_mac_vif_beacon_free(struct ath10k_vif
*arvif
)
900 struct ath10k
*ar
= arvif
->ar
;
902 lockdep_assert_held(&ar
->data_lock
);
907 if (!arvif
->beacon_buf
)
908 dma_unmap_single(ar
->dev
, ATH10K_SKB_CB(arvif
->beacon
)->paddr
,
909 arvif
->beacon
->len
, DMA_TO_DEVICE
);
911 if (WARN_ON(arvif
->beacon_state
!= ATH10K_BEACON_SCHEDULED
&&
912 arvif
->beacon_state
!= ATH10K_BEACON_SENT
))
915 dev_kfree_skb_any(arvif
->beacon
);
917 arvif
->beacon
= NULL
;
918 arvif
->beacon_state
= ATH10K_BEACON_SCHEDULED
;
921 static void ath10k_mac_vif_beacon_cleanup(struct ath10k_vif
*arvif
)
923 struct ath10k
*ar
= arvif
->ar
;
925 lockdep_assert_held(&ar
->data_lock
);
927 ath10k_mac_vif_beacon_free(arvif
);
929 if (arvif
->beacon_buf
) {
930 dma_free_coherent(ar
->dev
, IEEE80211_MAX_FRAME_LEN
,
931 arvif
->beacon_buf
, arvif
->beacon_paddr
);
932 arvif
->beacon_buf
= NULL
;
936 static inline int ath10k_vdev_setup_sync(struct ath10k
*ar
)
938 unsigned long time_left
;
940 lockdep_assert_held(&ar
->conf_mutex
);
942 if (test_bit(ATH10K_FLAG_CRASH_FLUSH
, &ar
->dev_flags
))
945 time_left
= wait_for_completion_timeout(&ar
->vdev_setup_done
,
946 ATH10K_VDEV_SETUP_TIMEOUT_HZ
);
953 static int ath10k_monitor_vdev_start(struct ath10k
*ar
, int vdev_id
)
955 struct cfg80211_chan_def
*chandef
= NULL
;
956 struct ieee80211_channel
*channel
= NULL
;
957 struct wmi_vdev_start_request_arg arg
= {};
960 lockdep_assert_held(&ar
->conf_mutex
);
962 ieee80211_iter_chan_contexts_atomic(ar
->hw
,
963 ath10k_mac_get_any_chandef_iter
,
965 if (WARN_ON_ONCE(!chandef
))
968 channel
= chandef
->chan
;
970 arg
.vdev_id
= vdev_id
;
971 arg
.channel
.freq
= channel
->center_freq
;
972 arg
.channel
.band_center_freq1
= chandef
->center_freq1
;
974 /* TODO setup this dynamically, what in case we
975 don't have any vifs? */
976 arg
.channel
.mode
= chan_to_phymode(chandef
);
977 arg
.channel
.chan_radar
=
978 !!(channel
->flags
& IEEE80211_CHAN_RADAR
);
980 arg
.channel
.min_power
= 0;
981 arg
.channel
.max_power
= channel
->max_power
* 2;
982 arg
.channel
.max_reg_power
= channel
->max_reg_power
* 2;
983 arg
.channel
.max_antenna_gain
= channel
->max_antenna_gain
* 2;
985 reinit_completion(&ar
->vdev_setup_done
);
987 ret
= ath10k_wmi_vdev_start(ar
, &arg
);
989 ath10k_warn(ar
, "failed to request monitor vdev %i start: %d\n",
994 ret
= ath10k_vdev_setup_sync(ar
);
996 ath10k_warn(ar
, "failed to synchronize setup for monitor vdev %i start: %d\n",
1001 ret
= ath10k_wmi_vdev_up(ar
, vdev_id
, 0, ar
->mac_addr
);
1003 ath10k_warn(ar
, "failed to put up monitor vdev %i: %d\n",
1008 ar
->monitor_vdev_id
= vdev_id
;
1010 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac monitor vdev %i started\n",
1011 ar
->monitor_vdev_id
);
1015 ret
= ath10k_wmi_vdev_stop(ar
, ar
->monitor_vdev_id
);
1017 ath10k_warn(ar
, "failed to stop monitor vdev %i after start failure: %d\n",
1018 ar
->monitor_vdev_id
, ret
);
1023 static int ath10k_monitor_vdev_stop(struct ath10k
*ar
)
1027 lockdep_assert_held(&ar
->conf_mutex
);
1029 ret
= ath10k_wmi_vdev_down(ar
, ar
->monitor_vdev_id
);
1031 ath10k_warn(ar
, "failed to put down monitor vdev %i: %d\n",
1032 ar
->monitor_vdev_id
, ret
);
1034 reinit_completion(&ar
->vdev_setup_done
);
1036 ret
= ath10k_wmi_vdev_stop(ar
, ar
->monitor_vdev_id
);
1038 ath10k_warn(ar
, "failed to to request monitor vdev %i stop: %d\n",
1039 ar
->monitor_vdev_id
, ret
);
1041 ret
= ath10k_vdev_setup_sync(ar
);
1043 ath10k_warn(ar
, "failed to synchronize monitor vdev %i stop: %d\n",
1044 ar
->monitor_vdev_id
, ret
);
1046 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac monitor vdev %i stopped\n",
1047 ar
->monitor_vdev_id
);
1051 static int ath10k_monitor_vdev_create(struct ath10k
*ar
)
1055 lockdep_assert_held(&ar
->conf_mutex
);
1057 if (ar
->free_vdev_map
== 0) {
1058 ath10k_warn(ar
, "failed to find free vdev id for monitor vdev\n");
1062 bit
= __ffs64(ar
->free_vdev_map
);
1064 ar
->monitor_vdev_id
= bit
;
1066 ret
= ath10k_wmi_vdev_create(ar
, ar
->monitor_vdev_id
,
1067 WMI_VDEV_TYPE_MONITOR
,
1070 ath10k_warn(ar
, "failed to request monitor vdev %i creation: %d\n",
1071 ar
->monitor_vdev_id
, ret
);
1075 ar
->free_vdev_map
&= ~(1LL << ar
->monitor_vdev_id
);
1076 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac monitor vdev %d created\n",
1077 ar
->monitor_vdev_id
);
1082 static int ath10k_monitor_vdev_delete(struct ath10k
*ar
)
1086 lockdep_assert_held(&ar
->conf_mutex
);
1088 ret
= ath10k_wmi_vdev_delete(ar
, ar
->monitor_vdev_id
);
1090 ath10k_warn(ar
, "failed to request wmi monitor vdev %i removal: %d\n",
1091 ar
->monitor_vdev_id
, ret
);
1095 ar
->free_vdev_map
|= 1LL << ar
->monitor_vdev_id
;
1097 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac monitor vdev %d deleted\n",
1098 ar
->monitor_vdev_id
);
1102 static int ath10k_monitor_start(struct ath10k
*ar
)
1106 lockdep_assert_held(&ar
->conf_mutex
);
1108 ret
= ath10k_monitor_vdev_create(ar
);
1110 ath10k_warn(ar
, "failed to create monitor vdev: %d\n", ret
);
1114 ret
= ath10k_monitor_vdev_start(ar
, ar
->monitor_vdev_id
);
1116 ath10k_warn(ar
, "failed to start monitor vdev: %d\n", ret
);
1117 ath10k_monitor_vdev_delete(ar
);
1121 ar
->monitor_started
= true;
1122 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac monitor started\n");
1127 static int ath10k_monitor_stop(struct ath10k
*ar
)
1131 lockdep_assert_held(&ar
->conf_mutex
);
1133 ret
= ath10k_monitor_vdev_stop(ar
);
1135 ath10k_warn(ar
, "failed to stop monitor vdev: %d\n", ret
);
1139 ret
= ath10k_monitor_vdev_delete(ar
);
1141 ath10k_warn(ar
, "failed to delete monitor vdev: %d\n", ret
);
1145 ar
->monitor_started
= false;
1146 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac monitor stopped\n");
1151 static bool ath10k_mac_monitor_vdev_is_needed(struct ath10k
*ar
)
1155 /* At least one chanctx is required to derive a channel to start
1158 num_ctx
= ath10k_mac_num_chanctxs(ar
);
1162 /* If there's already an existing special monitor interface then don't
1163 * bother creating another monitor vdev.
1165 if (ar
->monitor_arvif
)
1168 return ar
->monitor
||
1169 ar
->filter_flags
& FIF_OTHER_BSS
||
1170 test_bit(ATH10K_CAC_RUNNING
, &ar
->dev_flags
);
1173 static bool ath10k_mac_monitor_vdev_is_allowed(struct ath10k
*ar
)
1177 num_ctx
= ath10k_mac_num_chanctxs(ar
);
1179 /* FIXME: Current interface combinations and cfg80211/mac80211 code
1180 * shouldn't allow this but make sure to prevent handling the following
1181 * case anyway since multi-channel DFS hasn't been tested at all.
1183 if (test_bit(ATH10K_CAC_RUNNING
, &ar
->dev_flags
) && num_ctx
> 1)
1189 static int ath10k_monitor_recalc(struct ath10k
*ar
)
1195 lockdep_assert_held(&ar
->conf_mutex
);
1197 needed
= ath10k_mac_monitor_vdev_is_needed(ar
);
1198 allowed
= ath10k_mac_monitor_vdev_is_allowed(ar
);
1200 ath10k_dbg(ar
, ATH10K_DBG_MAC
,
1201 "mac monitor recalc started? %d needed? %d allowed? %d\n",
1202 ar
->monitor_started
, needed
, allowed
);
1204 if (WARN_ON(needed
&& !allowed
)) {
1205 if (ar
->monitor_started
) {
1206 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac monitor stopping disallowed monitor\n");
1208 ret
= ath10k_monitor_stop(ar
);
1210 ath10k_warn(ar
, "failed to stop disallowed monitor: %d\n",
1218 if (needed
== ar
->monitor_started
)
1222 return ath10k_monitor_start(ar
);
1224 return ath10k_monitor_stop(ar
);
1227 static int ath10k_recalc_rtscts_prot(struct ath10k_vif
*arvif
)
1229 struct ath10k
*ar
= arvif
->ar
;
1230 u32 vdev_param
, rts_cts
= 0;
1232 lockdep_assert_held(&ar
->conf_mutex
);
1234 vdev_param
= ar
->wmi
.vdev_param
->enable_rtscts
;
1236 rts_cts
|= SM(WMI_RTSCTS_ENABLED
, WMI_RTSCTS_SET
);
1238 if (arvif
->num_legacy_stations
> 0)
1239 rts_cts
|= SM(WMI_RTSCTS_ACROSS_SW_RETRIES
,
1240 WMI_RTSCTS_PROFILE
);
1242 rts_cts
|= SM(WMI_RTSCTS_FOR_SECOND_RATESERIES
,
1243 WMI_RTSCTS_PROFILE
);
1245 return ath10k_wmi_vdev_set_param(ar
, arvif
->vdev_id
, vdev_param
,
1249 static int ath10k_start_cac(struct ath10k
*ar
)
1253 lockdep_assert_held(&ar
->conf_mutex
);
1255 set_bit(ATH10K_CAC_RUNNING
, &ar
->dev_flags
);
1257 ret
= ath10k_monitor_recalc(ar
);
1259 ath10k_warn(ar
, "failed to start monitor (cac): %d\n", ret
);
1260 clear_bit(ATH10K_CAC_RUNNING
, &ar
->dev_flags
);
1264 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac cac start monitor vdev %d\n",
1265 ar
->monitor_vdev_id
);
1270 static int ath10k_stop_cac(struct ath10k
*ar
)
1272 lockdep_assert_held(&ar
->conf_mutex
);
1274 /* CAC is not running - do nothing */
1275 if (!test_bit(ATH10K_CAC_RUNNING
, &ar
->dev_flags
))
1278 clear_bit(ATH10K_CAC_RUNNING
, &ar
->dev_flags
);
1279 ath10k_monitor_stop(ar
);
1281 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac cac finished\n");
1286 static void ath10k_mac_has_radar_iter(struct ieee80211_hw
*hw
,
1287 struct ieee80211_chanctx_conf
*conf
,
1292 if (!*ret
&& conf
->radar_enabled
)
1296 static bool ath10k_mac_has_radar_enabled(struct ath10k
*ar
)
1298 bool has_radar
= false;
1300 ieee80211_iter_chan_contexts_atomic(ar
->hw
,
1301 ath10k_mac_has_radar_iter
,
1307 static void ath10k_recalc_radar_detection(struct ath10k
*ar
)
1311 lockdep_assert_held(&ar
->conf_mutex
);
1313 ath10k_stop_cac(ar
);
1315 if (!ath10k_mac_has_radar_enabled(ar
))
1318 if (ar
->num_started_vdevs
> 0)
1321 ret
= ath10k_start_cac(ar
);
1324 * Not possible to start CAC on current channel so starting
1325 * radiation is not allowed, make this channel DFS_UNAVAILABLE
1326 * by indicating that radar was detected.
1328 ath10k_warn(ar
, "failed to start CAC: %d\n", ret
);
1329 ieee80211_radar_detected(ar
->hw
);
1333 static int ath10k_vdev_stop(struct ath10k_vif
*arvif
)
1335 struct ath10k
*ar
= arvif
->ar
;
1338 lockdep_assert_held(&ar
->conf_mutex
);
1340 reinit_completion(&ar
->vdev_setup_done
);
1342 ret
= ath10k_wmi_vdev_stop(ar
, arvif
->vdev_id
);
1344 ath10k_warn(ar
, "failed to stop WMI vdev %i: %d\n",
1345 arvif
->vdev_id
, ret
);
1349 ret
= ath10k_vdev_setup_sync(ar
);
1351 ath10k_warn(ar
, "failed to syncronise setup for vdev %i: %d\n",
1352 arvif
->vdev_id
, ret
);
1356 WARN_ON(ar
->num_started_vdevs
== 0);
1358 if (ar
->num_started_vdevs
!= 0) {
1359 ar
->num_started_vdevs
--;
1360 ath10k_recalc_radar_detection(ar
);
1366 static int ath10k_vdev_start_restart(struct ath10k_vif
*arvif
,
1367 const struct cfg80211_chan_def
*chandef
,
1370 struct ath10k
*ar
= arvif
->ar
;
1371 struct wmi_vdev_start_request_arg arg
= {};
1374 lockdep_assert_held(&ar
->conf_mutex
);
1376 reinit_completion(&ar
->vdev_setup_done
);
1378 arg
.vdev_id
= arvif
->vdev_id
;
1379 arg
.dtim_period
= arvif
->dtim_period
;
1380 arg
.bcn_intval
= arvif
->beacon_interval
;
1382 arg
.channel
.freq
= chandef
->chan
->center_freq
;
1383 arg
.channel
.band_center_freq1
= chandef
->center_freq1
;
1384 arg
.channel
.mode
= chan_to_phymode(chandef
);
1386 arg
.channel
.min_power
= 0;
1387 arg
.channel
.max_power
= chandef
->chan
->max_power
* 2;
1388 arg
.channel
.max_reg_power
= chandef
->chan
->max_reg_power
* 2;
1389 arg
.channel
.max_antenna_gain
= chandef
->chan
->max_antenna_gain
* 2;
1391 if (arvif
->vdev_type
== WMI_VDEV_TYPE_AP
) {
1392 arg
.ssid
= arvif
->u
.ap
.ssid
;
1393 arg
.ssid_len
= arvif
->u
.ap
.ssid_len
;
1394 arg
.hidden_ssid
= arvif
->u
.ap
.hidden_ssid
;
1396 /* For now allow DFS for AP mode */
1397 arg
.channel
.chan_radar
=
1398 !!(chandef
->chan
->flags
& IEEE80211_CHAN_RADAR
);
1399 } else if (arvif
->vdev_type
== WMI_VDEV_TYPE_IBSS
) {
1400 arg
.ssid
= arvif
->vif
->bss_conf
.ssid
;
1401 arg
.ssid_len
= arvif
->vif
->bss_conf
.ssid_len
;
1404 ath10k_dbg(ar
, ATH10K_DBG_MAC
,
1405 "mac vdev %d start center_freq %d phymode %s\n",
1406 arg
.vdev_id
, arg
.channel
.freq
,
1407 ath10k_wmi_phymode_str(arg
.channel
.mode
));
1410 ret
= ath10k_wmi_vdev_restart(ar
, &arg
);
1412 ret
= ath10k_wmi_vdev_start(ar
, &arg
);
1415 ath10k_warn(ar
, "failed to start WMI vdev %i: %d\n",
1420 ret
= ath10k_vdev_setup_sync(ar
);
1423 "failed to synchronize setup for vdev %i restart %d: %d\n",
1424 arg
.vdev_id
, restart
, ret
);
1428 ar
->num_started_vdevs
++;
1429 ath10k_recalc_radar_detection(ar
);
1434 static int ath10k_vdev_start(struct ath10k_vif
*arvif
,
1435 const struct cfg80211_chan_def
*def
)
1437 return ath10k_vdev_start_restart(arvif
, def
, false);
1440 static int ath10k_vdev_restart(struct ath10k_vif
*arvif
,
1441 const struct cfg80211_chan_def
*def
)
1443 return ath10k_vdev_start_restart(arvif
, def
, true);
1446 static int ath10k_mac_setup_bcn_p2p_ie(struct ath10k_vif
*arvif
,
1447 struct sk_buff
*bcn
)
1449 struct ath10k
*ar
= arvif
->ar
;
1450 struct ieee80211_mgmt
*mgmt
;
1454 if (arvif
->vif
->type
!= NL80211_IFTYPE_AP
|| !arvif
->vif
->p2p
)
1457 mgmt
= (void *)bcn
->data
;
1458 p2p_ie
= cfg80211_find_vendor_ie(WLAN_OUI_WFA
, WLAN_OUI_TYPE_WFA_P2P
,
1459 mgmt
->u
.beacon
.variable
,
1460 bcn
->len
- (mgmt
->u
.beacon
.variable
-
1465 ret
= ath10k_wmi_p2p_go_bcn_ie(ar
, arvif
->vdev_id
, p2p_ie
);
1467 ath10k_warn(ar
, "failed to submit p2p go bcn ie for vdev %i: %d\n",
1468 arvif
->vdev_id
, ret
);
1475 static int ath10k_mac_remove_vendor_ie(struct sk_buff
*skb
, unsigned int oui
,
1476 u8 oui_type
, size_t ie_offset
)
1483 if (WARN_ON(skb
->len
< ie_offset
))
1486 ie
= (u8
*)cfg80211_find_vendor_ie(oui
, oui_type
,
1487 skb
->data
+ ie_offset
,
1488 skb
->len
- ie_offset
);
1493 end
= skb
->data
+ skb
->len
;
1496 if (WARN_ON(next
> end
))
1499 memmove(ie
, next
, end
- next
);
1500 skb_trim(skb
, skb
->len
- len
);
1505 static int ath10k_mac_setup_bcn_tmpl(struct ath10k_vif
*arvif
)
1507 struct ath10k
*ar
= arvif
->ar
;
1508 struct ieee80211_hw
*hw
= ar
->hw
;
1509 struct ieee80211_vif
*vif
= arvif
->vif
;
1510 struct ieee80211_mutable_offsets offs
= {};
1511 struct sk_buff
*bcn
;
1514 if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD
, ar
->wmi
.svc_map
))
1517 if (arvif
->vdev_type
!= WMI_VDEV_TYPE_AP
&&
1518 arvif
->vdev_type
!= WMI_VDEV_TYPE_IBSS
)
1521 bcn
= ieee80211_beacon_get_template(hw
, vif
, &offs
);
1523 ath10k_warn(ar
, "failed to get beacon template from mac80211\n");
1527 ret
= ath10k_mac_setup_bcn_p2p_ie(arvif
, bcn
);
1529 ath10k_warn(ar
, "failed to setup p2p go bcn ie: %d\n", ret
);
1534 /* P2P IE is inserted by firmware automatically (as configured above)
1535 * so remove it from the base beacon template to avoid duplicate P2P
1536 * IEs in beacon frames.
1538 ath10k_mac_remove_vendor_ie(bcn
, WLAN_OUI_WFA
, WLAN_OUI_TYPE_WFA_P2P
,
1539 offsetof(struct ieee80211_mgmt
,
1540 u
.beacon
.variable
));
1542 ret
= ath10k_wmi_bcn_tmpl(ar
, arvif
->vdev_id
, offs
.tim_offset
, bcn
, 0,
1547 ath10k_warn(ar
, "failed to submit beacon template command: %d\n",
1555 static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif
*arvif
)
1557 struct ath10k
*ar
= arvif
->ar
;
1558 struct ieee80211_hw
*hw
= ar
->hw
;
1559 struct ieee80211_vif
*vif
= arvif
->vif
;
1560 struct sk_buff
*prb
;
1563 if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD
, ar
->wmi
.svc_map
))
1566 if (arvif
->vdev_type
!= WMI_VDEV_TYPE_AP
)
1569 prb
= ieee80211_proberesp_get(hw
, vif
);
1571 ath10k_warn(ar
, "failed to get probe resp template from mac80211\n");
1575 ret
= ath10k_wmi_prb_tmpl(ar
, arvif
->vdev_id
, prb
);
1579 ath10k_warn(ar
, "failed to submit probe resp template command: %d\n",
1587 static int ath10k_mac_vif_fix_hidden_ssid(struct ath10k_vif
*arvif
)
1589 struct ath10k
*ar
= arvif
->ar
;
1590 struct cfg80211_chan_def def
;
1593 /* When originally vdev is started during assign_vif_chanctx() some
1594 * information is missing, notably SSID. Firmware revisions with beacon
1595 * offloading require the SSID to be provided during vdev (re)start to
1596 * handle hidden SSID properly.
1598 * Vdev restart must be done after vdev has been both started and
1599 * upped. Otherwise some firmware revisions (at least 10.2) fail to
1600 * deliver vdev restart response event causing timeouts during vdev
1601 * syncing in ath10k.
1603 * Note: The vdev down/up and template reinstallation could be skipped
1604 * since only wmi-tlv firmware are known to have beacon offload and
1605 * wmi-tlv doesn't seem to misbehave like 10.2 wrt vdev restart
1606 * response delivery. It's probably more robust to keep it as is.
1608 if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD
, ar
->wmi
.svc_map
))
1611 if (WARN_ON(!arvif
->is_started
))
1614 if (WARN_ON(!arvif
->is_up
))
1617 if (WARN_ON(ath10k_mac_vif_chan(arvif
->vif
, &def
)))
1620 ret
= ath10k_wmi_vdev_down(ar
, arvif
->vdev_id
);
1622 ath10k_warn(ar
, "failed to bring down ap vdev %i: %d\n",
1623 arvif
->vdev_id
, ret
);
1627 /* Vdev down reset beacon & presp templates. Reinstall them. Otherwise
1628 * firmware will crash upon vdev up.
1631 ret
= ath10k_mac_setup_bcn_tmpl(arvif
);
1633 ath10k_warn(ar
, "failed to update beacon template: %d\n", ret
);
1637 ret
= ath10k_mac_setup_prb_tmpl(arvif
);
1639 ath10k_warn(ar
, "failed to update presp template: %d\n", ret
);
1643 ret
= ath10k_vdev_restart(arvif
, &def
);
1645 ath10k_warn(ar
, "failed to restart ap vdev %i: %d\n",
1646 arvif
->vdev_id
, ret
);
1650 ret
= ath10k_wmi_vdev_up(arvif
->ar
, arvif
->vdev_id
, arvif
->aid
,
1653 ath10k_warn(ar
, "failed to bring up ap vdev %i: %d\n",
1654 arvif
->vdev_id
, ret
);
1661 static void ath10k_control_beaconing(struct ath10k_vif
*arvif
,
1662 struct ieee80211_bss_conf
*info
)
1664 struct ath10k
*ar
= arvif
->ar
;
1667 lockdep_assert_held(&arvif
->ar
->conf_mutex
);
1669 if (!info
->enable_beacon
) {
1670 ret
= ath10k_wmi_vdev_down(ar
, arvif
->vdev_id
);
1672 ath10k_warn(ar
, "failed to down vdev_id %i: %d\n",
1673 arvif
->vdev_id
, ret
);
1675 arvif
->is_up
= false;
1677 spin_lock_bh(&arvif
->ar
->data_lock
);
1678 ath10k_mac_vif_beacon_free(arvif
);
1679 spin_unlock_bh(&arvif
->ar
->data_lock
);
1684 arvif
->tx_seq_no
= 0x1000;
1687 ether_addr_copy(arvif
->bssid
, info
->bssid
);
1689 ret
= ath10k_wmi_vdev_up(arvif
->ar
, arvif
->vdev_id
, arvif
->aid
,
1692 ath10k_warn(ar
, "failed to bring up vdev %d: %i\n",
1693 arvif
->vdev_id
, ret
);
1697 arvif
->is_up
= true;
1699 ret
= ath10k_mac_vif_fix_hidden_ssid(arvif
);
1701 ath10k_warn(ar
, "failed to fix hidden ssid for vdev %i, expect trouble: %d\n",
1702 arvif
->vdev_id
, ret
);
1706 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac vdev %d up\n", arvif
->vdev_id
);
1709 static void ath10k_control_ibss(struct ath10k_vif
*arvif
,
1710 struct ieee80211_bss_conf
*info
,
1711 const u8 self_peer
[ETH_ALEN
])
1713 struct ath10k
*ar
= arvif
->ar
;
1717 lockdep_assert_held(&arvif
->ar
->conf_mutex
);
1719 if (!info
->ibss_joined
) {
1720 if (is_zero_ether_addr(arvif
->bssid
))
1723 eth_zero_addr(arvif
->bssid
);
1728 vdev_param
= arvif
->ar
->wmi
.vdev_param
->atim_window
;
1729 ret
= ath10k_wmi_vdev_set_param(arvif
->ar
, arvif
->vdev_id
, vdev_param
,
1730 ATH10K_DEFAULT_ATIM
);
1732 ath10k_warn(ar
, "failed to set IBSS ATIM for vdev %d: %d\n",
1733 arvif
->vdev_id
, ret
);
1736 static int ath10k_mac_vif_recalc_ps_wake_threshold(struct ath10k_vif
*arvif
)
1738 struct ath10k
*ar
= arvif
->ar
;
1743 lockdep_assert_held(&arvif
->ar
->conf_mutex
);
1745 if (arvif
->u
.sta
.uapsd
)
1746 value
= WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER
;
1748 value
= WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS
;
1750 param
= WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD
;
1751 ret
= ath10k_wmi_set_sta_ps_param(ar
, arvif
->vdev_id
, param
, value
);
1753 ath10k_warn(ar
, "failed to submit ps wake threshold %u on vdev %i: %d\n",
1754 value
, arvif
->vdev_id
, ret
);
1761 static int ath10k_mac_vif_recalc_ps_poll_count(struct ath10k_vif
*arvif
)
1763 struct ath10k
*ar
= arvif
->ar
;
1768 lockdep_assert_held(&arvif
->ar
->conf_mutex
);
1770 if (arvif
->u
.sta
.uapsd
)
1771 value
= WMI_STA_PS_PSPOLL_COUNT_UAPSD
;
1773 value
= WMI_STA_PS_PSPOLL_COUNT_NO_MAX
;
1775 param
= WMI_STA_PS_PARAM_PSPOLL_COUNT
;
1776 ret
= ath10k_wmi_set_sta_ps_param(ar
, arvif
->vdev_id
,
1779 ath10k_warn(ar
, "failed to submit ps poll count %u on vdev %i: %d\n",
1780 value
, arvif
->vdev_id
, ret
);
1787 static int ath10k_mac_num_vifs_started(struct ath10k
*ar
)
1789 struct ath10k_vif
*arvif
;
1792 lockdep_assert_held(&ar
->conf_mutex
);
1794 list_for_each_entry(arvif
, &ar
->arvifs
, list
)
1795 if (arvif
->is_started
)
1801 static int ath10k_mac_vif_setup_ps(struct ath10k_vif
*arvif
)
1803 struct ath10k
*ar
= arvif
->ar
;
1804 struct ieee80211_vif
*vif
= arvif
->vif
;
1805 struct ieee80211_conf
*conf
= &ar
->hw
->conf
;
1806 enum wmi_sta_powersave_param param
;
1807 enum wmi_sta_ps_mode psmode
;
1812 lockdep_assert_held(&arvif
->ar
->conf_mutex
);
1814 if (arvif
->vif
->type
!= NL80211_IFTYPE_STATION
)
1817 enable_ps
= arvif
->ps
;
1819 if (enable_ps
&& ath10k_mac_num_vifs_started(ar
) > 1 &&
1820 !test_bit(ATH10K_FW_FEATURE_MULTI_VIF_PS_SUPPORT
,
1821 ar
->running_fw
->fw_file
.fw_features
)) {
1822 ath10k_warn(ar
, "refusing to enable ps on vdev %i: not supported by fw\n",
1827 if (!arvif
->is_started
) {
1828 /* mac80211 can update vif powersave state while disconnected.
1829 * Firmware doesn't behave nicely and consumes more power than
1830 * necessary if PS is disabled on a non-started vdev. Hence
1831 * force-enable PS for non-running vdevs.
1833 psmode
= WMI_STA_PS_MODE_ENABLED
;
1834 } else if (enable_ps
) {
1835 psmode
= WMI_STA_PS_MODE_ENABLED
;
1836 param
= WMI_STA_PS_PARAM_INACTIVITY_TIME
;
1838 ps_timeout
= conf
->dynamic_ps_timeout
;
1839 if (ps_timeout
== 0) {
1840 /* Firmware doesn't like 0 */
1841 ps_timeout
= ieee80211_tu_to_usec(
1842 vif
->bss_conf
.beacon_int
) / 1000;
1845 ret
= ath10k_wmi_set_sta_ps_param(ar
, arvif
->vdev_id
, param
,
1848 ath10k_warn(ar
, "failed to set inactivity time for vdev %d: %i\n",
1849 arvif
->vdev_id
, ret
);
1853 psmode
= WMI_STA_PS_MODE_DISABLED
;
1856 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac vdev %d psmode %s\n",
1857 arvif
->vdev_id
, psmode
? "enable" : "disable");
1859 ret
= ath10k_wmi_set_psmode(ar
, arvif
->vdev_id
, psmode
);
1861 ath10k_warn(ar
, "failed to set PS Mode %d for vdev %d: %d\n",
1862 psmode
, arvif
->vdev_id
, ret
);
1869 static int ath10k_mac_vif_disable_keepalive(struct ath10k_vif
*arvif
)
1871 struct ath10k
*ar
= arvif
->ar
;
1872 struct wmi_sta_keepalive_arg arg
= {};
1875 lockdep_assert_held(&arvif
->ar
->conf_mutex
);
1877 if (arvif
->vdev_type
!= WMI_VDEV_TYPE_STA
)
1880 if (!test_bit(WMI_SERVICE_STA_KEEP_ALIVE
, ar
->wmi
.svc_map
))
1883 /* Some firmware revisions have a bug and ignore the `enabled` field.
1884 * Instead use the interval to disable the keepalive.
1886 arg
.vdev_id
= arvif
->vdev_id
;
1888 arg
.method
= WMI_STA_KEEPALIVE_METHOD_NULL_FRAME
;
1889 arg
.interval
= WMI_STA_KEEPALIVE_INTERVAL_DISABLE
;
1891 ret
= ath10k_wmi_sta_keepalive(ar
, &arg
);
1893 ath10k_warn(ar
, "failed to submit keepalive on vdev %i: %d\n",
1894 arvif
->vdev_id
, ret
);
1901 static void ath10k_mac_vif_ap_csa_count_down(struct ath10k_vif
*arvif
)
1903 struct ath10k
*ar
= arvif
->ar
;
1904 struct ieee80211_vif
*vif
= arvif
->vif
;
1907 lockdep_assert_held(&arvif
->ar
->conf_mutex
);
1909 if (WARN_ON(!test_bit(WMI_SERVICE_BEACON_OFFLOAD
, ar
->wmi
.svc_map
)))
1912 if (arvif
->vdev_type
!= WMI_VDEV_TYPE_AP
)
1915 if (!vif
->csa_active
)
1921 if (!ieee80211_csa_is_complete(vif
)) {
1922 ieee80211_csa_update_counter(vif
);
1924 ret
= ath10k_mac_setup_bcn_tmpl(arvif
);
1926 ath10k_warn(ar
, "failed to update bcn tmpl during csa: %d\n",
1929 ret
= ath10k_mac_setup_prb_tmpl(arvif
);
1931 ath10k_warn(ar
, "failed to update prb tmpl during csa: %d\n",
1934 ieee80211_csa_finish(vif
);
1938 static void ath10k_mac_vif_ap_csa_work(struct work_struct
*work
)
1940 struct ath10k_vif
*arvif
= container_of(work
, struct ath10k_vif
,
1942 struct ath10k
*ar
= arvif
->ar
;
1944 mutex_lock(&ar
->conf_mutex
);
1945 ath10k_mac_vif_ap_csa_count_down(arvif
);
1946 mutex_unlock(&ar
->conf_mutex
);
1949 static void ath10k_mac_handle_beacon_iter(void *data
, u8
*mac
,
1950 struct ieee80211_vif
*vif
)
1952 struct sk_buff
*skb
= data
;
1953 struct ieee80211_mgmt
*mgmt
= (void *)skb
->data
;
1954 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
1956 if (vif
->type
!= NL80211_IFTYPE_STATION
)
1959 if (!ether_addr_equal(mgmt
->bssid
, vif
->bss_conf
.bssid
))
1962 cancel_delayed_work(&arvif
->connection_loss_work
);
1965 void ath10k_mac_handle_beacon(struct ath10k
*ar
, struct sk_buff
*skb
)
1967 ieee80211_iterate_active_interfaces_atomic(ar
->hw
,
1968 IEEE80211_IFACE_ITER_NORMAL
,
1969 ath10k_mac_handle_beacon_iter
,
1973 static void ath10k_mac_handle_beacon_miss_iter(void *data
, u8
*mac
,
1974 struct ieee80211_vif
*vif
)
1976 u32
*vdev_id
= data
;
1977 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
1978 struct ath10k
*ar
= arvif
->ar
;
1979 struct ieee80211_hw
*hw
= ar
->hw
;
1981 if (arvif
->vdev_id
!= *vdev_id
)
1987 ieee80211_beacon_loss(vif
);
1989 /* Firmware doesn't report beacon loss events repeatedly. If AP probe
1990 * (done by mac80211) succeeds but beacons do not resume then it
1991 * doesn't make sense to continue operation. Queue connection loss work
1992 * which can be cancelled when beacon is received.
1994 ieee80211_queue_delayed_work(hw
, &arvif
->connection_loss_work
,
1995 ATH10K_CONNECTION_LOSS_HZ
);
1998 void ath10k_mac_handle_beacon_miss(struct ath10k
*ar
, u32 vdev_id
)
2000 ieee80211_iterate_active_interfaces_atomic(ar
->hw
,
2001 IEEE80211_IFACE_ITER_NORMAL
,
2002 ath10k_mac_handle_beacon_miss_iter
,
2006 static void ath10k_mac_vif_sta_connection_loss_work(struct work_struct
*work
)
2008 struct ath10k_vif
*arvif
= container_of(work
, struct ath10k_vif
,
2009 connection_loss_work
.work
);
2010 struct ieee80211_vif
*vif
= arvif
->vif
;
2015 ieee80211_connection_loss(vif
);
2018 /**********************/
2019 /* Station management */
2020 /**********************/
2022 static u32
ath10k_peer_assoc_h_listen_intval(struct ath10k
*ar
,
2023 struct ieee80211_vif
*vif
)
2025 /* Some firmware revisions have unstable STA powersave when listen
2026 * interval is set too high (e.g. 5). The symptoms are firmware doesn't
2027 * generate NullFunc frames properly even if buffered frames have been
2028 * indicated in Beacon TIM. Firmware would seldom wake up to pull
2029 * buffered frames. Often pinging the device from AP would simply fail.
2031 * As a workaround set it to 1.
2033 if (vif
->type
== NL80211_IFTYPE_STATION
)
2036 return ar
->hw
->conf
.listen_interval
;
2039 static void ath10k_peer_assoc_h_basic(struct ath10k
*ar
,
2040 struct ieee80211_vif
*vif
,
2041 struct ieee80211_sta
*sta
,
2042 struct wmi_peer_assoc_complete_arg
*arg
)
2044 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
2047 lockdep_assert_held(&ar
->conf_mutex
);
2049 if (vif
->type
== NL80211_IFTYPE_STATION
)
2050 aid
= vif
->bss_conf
.aid
;
2054 ether_addr_copy(arg
->addr
, sta
->addr
);
2055 arg
->vdev_id
= arvif
->vdev_id
;
2056 arg
->peer_aid
= aid
;
2057 arg
->peer_flags
|= arvif
->ar
->wmi
.peer_flags
->auth
;
2058 arg
->peer_listen_intval
= ath10k_peer_assoc_h_listen_intval(ar
, vif
);
2059 arg
->peer_num_spatial_streams
= 1;
2060 arg
->peer_caps
= vif
->bss_conf
.assoc_capability
;
2063 static void ath10k_peer_assoc_h_crypto(struct ath10k
*ar
,
2064 struct ieee80211_vif
*vif
,
2065 struct ieee80211_sta
*sta
,
2066 struct wmi_peer_assoc_complete_arg
*arg
)
2068 struct ieee80211_bss_conf
*info
= &vif
->bss_conf
;
2069 struct cfg80211_chan_def def
;
2070 struct cfg80211_bss
*bss
;
2071 const u8
*rsnie
= NULL
;
2072 const u8
*wpaie
= NULL
;
2074 lockdep_assert_held(&ar
->conf_mutex
);
2076 if (WARN_ON(ath10k_mac_vif_chan(vif
, &def
)))
2079 bss
= cfg80211_get_bss(ar
->hw
->wiphy
, def
.chan
, info
->bssid
, NULL
, 0,
2080 IEEE80211_BSS_TYPE_ANY
, IEEE80211_PRIVACY_ANY
);
2082 const struct cfg80211_bss_ies
*ies
;
2085 rsnie
= ieee80211_bss_get_ie(bss
, WLAN_EID_RSN
);
2087 ies
= rcu_dereference(bss
->ies
);
2089 wpaie
= cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT
,
2090 WLAN_OUI_TYPE_MICROSOFT_WPA
,
2094 cfg80211_put_bss(ar
->hw
->wiphy
, bss
);
2097 /* FIXME: base on RSN IE/WPA IE is a correct idea? */
2098 if (rsnie
|| wpaie
) {
2099 ath10k_dbg(ar
, ATH10K_DBG_WMI
, "%s: rsn ie found\n", __func__
);
2100 arg
->peer_flags
|= ar
->wmi
.peer_flags
->need_ptk_4_way
;
2104 ath10k_dbg(ar
, ATH10K_DBG_WMI
, "%s: wpa ie found\n", __func__
);
2105 arg
->peer_flags
|= ar
->wmi
.peer_flags
->need_gtk_2_way
;
2109 test_bit(ATH10K_FW_FEATURE_MFP_SUPPORT
,
2110 ar
->running_fw
->fw_file
.fw_features
)) {
2111 arg
->peer_flags
|= ar
->wmi
.peer_flags
->pmf
;
2115 static void ath10k_peer_assoc_h_rates(struct ath10k
*ar
,
2116 struct ieee80211_vif
*vif
,
2117 struct ieee80211_sta
*sta
,
2118 struct wmi_peer_assoc_complete_arg
*arg
)
2120 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
2121 struct wmi_rate_set_arg
*rateset
= &arg
->peer_legacy_rates
;
2122 struct cfg80211_chan_def def
;
2123 const struct ieee80211_supported_band
*sband
;
2124 const struct ieee80211_rate
*rates
;
2125 enum nl80211_band band
;
2130 lockdep_assert_held(&ar
->conf_mutex
);
2132 if (WARN_ON(ath10k_mac_vif_chan(vif
, &def
)))
2135 band
= def
.chan
->band
;
2136 sband
= ar
->hw
->wiphy
->bands
[band
];
2137 ratemask
= sta
->supp_rates
[band
];
2138 ratemask
&= arvif
->bitrate_mask
.control
[band
].legacy
;
2139 rates
= sband
->bitrates
;
2141 rateset
->num_rates
= 0;
2143 for (i
= 0; i
< 32; i
++, ratemask
>>= 1, rates
++) {
2144 if (!(ratemask
& 1))
2147 rate
= ath10k_mac_bitrate_to_rate(rates
->bitrate
);
2148 rateset
->rates
[rateset
->num_rates
] = rate
;
2149 rateset
->num_rates
++;
2154 ath10k_peer_assoc_h_ht_masked(const u8 ht_mcs_mask
[IEEE80211_HT_MCS_MASK_LEN
])
2158 for (nss
= 0; nss
< IEEE80211_HT_MCS_MASK_LEN
; nss
++)
2159 if (ht_mcs_mask
[nss
])
2166 ath10k_peer_assoc_h_vht_masked(const u16 vht_mcs_mask
[NL80211_VHT_NSS_MAX
])
2170 for (nss
= 0; nss
< NL80211_VHT_NSS_MAX
; nss
++)
2171 if (vht_mcs_mask
[nss
])
2177 static void ath10k_peer_assoc_h_ht(struct ath10k
*ar
,
2178 struct ieee80211_vif
*vif
,
2179 struct ieee80211_sta
*sta
,
2180 struct wmi_peer_assoc_complete_arg
*arg
)
2182 const struct ieee80211_sta_ht_cap
*ht_cap
= &sta
->ht_cap
;
2183 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
2184 struct cfg80211_chan_def def
;
2185 enum nl80211_band band
;
2186 const u8
*ht_mcs_mask
;
2187 const u16
*vht_mcs_mask
;
2192 lockdep_assert_held(&ar
->conf_mutex
);
2194 if (WARN_ON(ath10k_mac_vif_chan(vif
, &def
)))
2197 if (!ht_cap
->ht_supported
)
2200 band
= def
.chan
->band
;
2201 ht_mcs_mask
= arvif
->bitrate_mask
.control
[band
].ht_mcs
;
2202 vht_mcs_mask
= arvif
->bitrate_mask
.control
[band
].vht_mcs
;
2204 if (ath10k_peer_assoc_h_ht_masked(ht_mcs_mask
) &&
2205 ath10k_peer_assoc_h_vht_masked(vht_mcs_mask
))
2208 arg
->peer_flags
|= ar
->wmi
.peer_flags
->ht
;
2209 arg
->peer_max_mpdu
= (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR
+
2210 ht_cap
->ampdu_factor
)) - 1;
2212 arg
->peer_mpdu_density
=
2213 ath10k_parse_mpdudensity(ht_cap
->ampdu_density
);
2215 arg
->peer_ht_caps
= ht_cap
->cap
;
2216 arg
->peer_rate_caps
|= WMI_RC_HT_FLAG
;
2218 if (ht_cap
->cap
& IEEE80211_HT_CAP_LDPC_CODING
)
2219 arg
->peer_flags
|= ar
->wmi
.peer_flags
->ldbc
;
2221 if (sta
->bandwidth
>= IEEE80211_STA_RX_BW_40
) {
2222 arg
->peer_flags
|= ar
->wmi
.peer_flags
->bw40
;
2223 arg
->peer_rate_caps
|= WMI_RC_CW40_FLAG
;
2226 if (arvif
->bitrate_mask
.control
[band
].gi
!= NL80211_TXRATE_FORCE_LGI
) {
2227 if (ht_cap
->cap
& IEEE80211_HT_CAP_SGI_20
)
2228 arg
->peer_rate_caps
|= WMI_RC_SGI_FLAG
;
2230 if (ht_cap
->cap
& IEEE80211_HT_CAP_SGI_40
)
2231 arg
->peer_rate_caps
|= WMI_RC_SGI_FLAG
;
2234 if (ht_cap
->cap
& IEEE80211_HT_CAP_TX_STBC
) {
2235 arg
->peer_rate_caps
|= WMI_RC_TX_STBC_FLAG
;
2236 arg
->peer_flags
|= ar
->wmi
.peer_flags
->stbc
;
2239 if (ht_cap
->cap
& IEEE80211_HT_CAP_RX_STBC
) {
2240 stbc
= ht_cap
->cap
& IEEE80211_HT_CAP_RX_STBC
;
2241 stbc
= stbc
>> IEEE80211_HT_CAP_RX_STBC_SHIFT
;
2242 stbc
= stbc
<< WMI_RC_RX_STBC_FLAG_S
;
2243 arg
->peer_rate_caps
|= stbc
;
2244 arg
->peer_flags
|= ar
->wmi
.peer_flags
->stbc
;
2247 if (ht_cap
->mcs
.rx_mask
[1] && ht_cap
->mcs
.rx_mask
[2])
2248 arg
->peer_rate_caps
|= WMI_RC_TS_FLAG
;
2249 else if (ht_cap
->mcs
.rx_mask
[1])
2250 arg
->peer_rate_caps
|= WMI_RC_DS_FLAG
;
2252 for (i
= 0, n
= 0, max_nss
= 0; i
< IEEE80211_HT_MCS_MASK_LEN
* 8; i
++)
2253 if ((ht_cap
->mcs
.rx_mask
[i
/ 8] & BIT(i
% 8)) &&
2254 (ht_mcs_mask
[i
/ 8] & BIT(i
% 8))) {
2255 max_nss
= (i
/ 8) + 1;
2256 arg
->peer_ht_rates
.rates
[n
++] = i
;
2260 * This is a workaround for HT-enabled STAs which break the spec
2261 * and have no HT capabilities RX mask (no HT RX MCS map).
2263 * As per spec, in section 20.3.5 Modulation and coding scheme (MCS),
2264 * MCS 0 through 7 are mandatory in 20MHz with 800 ns GI at all STAs.
2266 * Firmware asserts if such situation occurs.
2269 arg
->peer_ht_rates
.num_rates
= 8;
2270 for (i
= 0; i
< arg
->peer_ht_rates
.num_rates
; i
++)
2271 arg
->peer_ht_rates
.rates
[i
] = i
;
2273 arg
->peer_ht_rates
.num_rates
= n
;
2274 arg
->peer_num_spatial_streams
= min(sta
->rx_nss
, max_nss
);
2277 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac ht peer %pM mcs cnt %d nss %d\n",
2279 arg
->peer_ht_rates
.num_rates
,
2280 arg
->peer_num_spatial_streams
);
2283 static int ath10k_peer_assoc_qos_ap(struct ath10k
*ar
,
2284 struct ath10k_vif
*arvif
,
2285 struct ieee80211_sta
*sta
)
2291 lockdep_assert_held(&ar
->conf_mutex
);
2293 if (sta
->wme
&& sta
->uapsd_queues
) {
2294 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac uapsd_queues 0x%x max_sp %d\n",
2295 sta
->uapsd_queues
, sta
->max_sp
);
2297 if (sta
->uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_VO
)
2298 uapsd
|= WMI_AP_PS_UAPSD_AC3_DELIVERY_EN
|
2299 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN
;
2300 if (sta
->uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_VI
)
2301 uapsd
|= WMI_AP_PS_UAPSD_AC2_DELIVERY_EN
|
2302 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN
;
2303 if (sta
->uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_BK
)
2304 uapsd
|= WMI_AP_PS_UAPSD_AC1_DELIVERY_EN
|
2305 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN
;
2306 if (sta
->uapsd_queues
& IEEE80211_WMM_IE_STA_QOSINFO_AC_BE
)
2307 uapsd
|= WMI_AP_PS_UAPSD_AC0_DELIVERY_EN
|
2308 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN
;
2310 if (sta
->max_sp
< MAX_WMI_AP_PS_PEER_PARAM_MAX_SP
)
2311 max_sp
= sta
->max_sp
;
2313 ret
= ath10k_wmi_set_ap_ps_param(ar
, arvif
->vdev_id
,
2315 WMI_AP_PS_PEER_PARAM_UAPSD
,
2318 ath10k_warn(ar
, "failed to set ap ps peer param uapsd for vdev %i: %d\n",
2319 arvif
->vdev_id
, ret
);
2323 ret
= ath10k_wmi_set_ap_ps_param(ar
, arvif
->vdev_id
,
2325 WMI_AP_PS_PEER_PARAM_MAX_SP
,
2328 ath10k_warn(ar
, "failed to set ap ps peer param max sp for vdev %i: %d\n",
2329 arvif
->vdev_id
, ret
);
2333 /* TODO setup this based on STA listen interval and
2334 beacon interval. Currently we don't know
2335 sta->listen_interval - mac80211 patch required.
2336 Currently use 10 seconds */
2337 ret
= ath10k_wmi_set_ap_ps_param(ar
, arvif
->vdev_id
, sta
->addr
,
2338 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME
,
2341 ath10k_warn(ar
, "failed to set ap ps peer param ageout time for vdev %i: %d\n",
2342 arvif
->vdev_id
, ret
);
2351 ath10k_peer_assoc_h_vht_limit(u16 tx_mcs_set
,
2352 const u16 vht_mcs_limit
[NL80211_VHT_NSS_MAX
])
2359 for (nss
= 0; nss
< NL80211_VHT_NSS_MAX
; nss
++) {
2360 mcs_map
= ath10k_mac_get_max_vht_mcs_map(tx_mcs_set
, nss
) &
2364 idx_limit
= fls(mcs_map
) - 1;
2368 switch (idx_limit
) {
2369 case 0: /* fall through */
2370 case 1: /* fall through */
2371 case 2: /* fall through */
2372 case 3: /* fall through */
2373 case 4: /* fall through */
2374 case 5: /* fall through */
2375 case 6: /* fall through */
2377 /* see ath10k_mac_can_set_bitrate_mask() */
2381 mcs
= IEEE80211_VHT_MCS_NOT_SUPPORTED
;
2384 mcs
= IEEE80211_VHT_MCS_SUPPORT_0_7
;
2387 mcs
= IEEE80211_VHT_MCS_SUPPORT_0_8
;
2390 mcs
= IEEE80211_VHT_MCS_SUPPORT_0_9
;
2394 tx_mcs_set
&= ~(0x3 << (nss
* 2));
2395 tx_mcs_set
|= mcs
<< (nss
* 2);
2401 static void ath10k_peer_assoc_h_vht(struct ath10k
*ar
,
2402 struct ieee80211_vif
*vif
,
2403 struct ieee80211_sta
*sta
,
2404 struct wmi_peer_assoc_complete_arg
*arg
)
2406 const struct ieee80211_sta_vht_cap
*vht_cap
= &sta
->vht_cap
;
2407 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
2408 struct cfg80211_chan_def def
;
2409 enum nl80211_band band
;
2410 const u16
*vht_mcs_mask
;
2413 if (WARN_ON(ath10k_mac_vif_chan(vif
, &def
)))
2416 if (!vht_cap
->vht_supported
)
2419 band
= def
.chan
->band
;
2420 vht_mcs_mask
= arvif
->bitrate_mask
.control
[band
].vht_mcs
;
2422 if (ath10k_peer_assoc_h_vht_masked(vht_mcs_mask
))
2425 arg
->peer_flags
|= ar
->wmi
.peer_flags
->vht
;
2427 if (def
.chan
->band
== NL80211_BAND_2GHZ
)
2428 arg
->peer_flags
|= ar
->wmi
.peer_flags
->vht_2g
;
2430 arg
->peer_vht_caps
= vht_cap
->cap
;
2432 ampdu_factor
= (vht_cap
->cap
&
2433 IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK
) >>
2434 IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT
;
2436 /* Workaround: Some Netgear/Linksys 11ac APs set Rx A-MPDU factor to
2437 * zero in VHT IE. Using it would result in degraded throughput.
2438 * arg->peer_max_mpdu at this point contains HT max_mpdu so keep
2439 * it if VHT max_mpdu is smaller. */
2440 arg
->peer_max_mpdu
= max(arg
->peer_max_mpdu
,
2441 (1U << (IEEE80211_HT_MAX_AMPDU_FACTOR
+
2442 ampdu_factor
)) - 1);
2444 if (sta
->bandwidth
== IEEE80211_STA_RX_BW_80
)
2445 arg
->peer_flags
|= ar
->wmi
.peer_flags
->bw80
;
2447 arg
->peer_vht_rates
.rx_max_rate
=
2448 __le16_to_cpu(vht_cap
->vht_mcs
.rx_highest
);
2449 arg
->peer_vht_rates
.rx_mcs_set
=
2450 __le16_to_cpu(vht_cap
->vht_mcs
.rx_mcs_map
);
2451 arg
->peer_vht_rates
.tx_max_rate
=
2452 __le16_to_cpu(vht_cap
->vht_mcs
.tx_highest
);
2453 arg
->peer_vht_rates
.tx_mcs_set
= ath10k_peer_assoc_h_vht_limit(
2454 __le16_to_cpu(vht_cap
->vht_mcs
.tx_mcs_map
), vht_mcs_mask
);
2456 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac vht peer %pM max_mpdu %d flags 0x%x\n",
2457 sta
->addr
, arg
->peer_max_mpdu
, arg
->peer_flags
);
2460 static void ath10k_peer_assoc_h_qos(struct ath10k
*ar
,
2461 struct ieee80211_vif
*vif
,
2462 struct ieee80211_sta
*sta
,
2463 struct wmi_peer_assoc_complete_arg
*arg
)
2465 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
2467 switch (arvif
->vdev_type
) {
2468 case WMI_VDEV_TYPE_AP
:
2470 arg
->peer_flags
|= arvif
->ar
->wmi
.peer_flags
->qos
;
2472 if (sta
->wme
&& sta
->uapsd_queues
) {
2473 arg
->peer_flags
|= arvif
->ar
->wmi
.peer_flags
->apsd
;
2474 arg
->peer_rate_caps
|= WMI_RC_UAPSD_FLAG
;
2477 case WMI_VDEV_TYPE_STA
:
2478 if (vif
->bss_conf
.qos
)
2479 arg
->peer_flags
|= arvif
->ar
->wmi
.peer_flags
->qos
;
2481 case WMI_VDEV_TYPE_IBSS
:
2483 arg
->peer_flags
|= arvif
->ar
->wmi
.peer_flags
->qos
;
2489 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac peer %pM qos %d\n",
2490 sta
->addr
, !!(arg
->peer_flags
&
2491 arvif
->ar
->wmi
.peer_flags
->qos
));
2494 static bool ath10k_mac_sta_has_ofdm_only(struct ieee80211_sta
*sta
)
2496 return sta
->supp_rates
[NL80211_BAND_2GHZ
] >>
2497 ATH10K_MAC_FIRST_OFDM_RATE_IDX
;
2500 static void ath10k_peer_assoc_h_phymode(struct ath10k
*ar
,
2501 struct ieee80211_vif
*vif
,
2502 struct ieee80211_sta
*sta
,
2503 struct wmi_peer_assoc_complete_arg
*arg
)
2505 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
2506 struct cfg80211_chan_def def
;
2507 enum nl80211_band band
;
2508 const u8
*ht_mcs_mask
;
2509 const u16
*vht_mcs_mask
;
2510 enum wmi_phy_mode phymode
= MODE_UNKNOWN
;
2512 if (WARN_ON(ath10k_mac_vif_chan(vif
, &def
)))
2515 band
= def
.chan
->band
;
2516 ht_mcs_mask
= arvif
->bitrate_mask
.control
[band
].ht_mcs
;
2517 vht_mcs_mask
= arvif
->bitrate_mask
.control
[band
].vht_mcs
;
2520 case NL80211_BAND_2GHZ
:
2521 if (sta
->vht_cap
.vht_supported
&&
2522 !ath10k_peer_assoc_h_vht_masked(vht_mcs_mask
)) {
2523 if (sta
->bandwidth
== IEEE80211_STA_RX_BW_40
)
2524 phymode
= MODE_11AC_VHT40
;
2526 phymode
= MODE_11AC_VHT20
;
2527 } else if (sta
->ht_cap
.ht_supported
&&
2528 !ath10k_peer_assoc_h_ht_masked(ht_mcs_mask
)) {
2529 if (sta
->bandwidth
== IEEE80211_STA_RX_BW_40
)
2530 phymode
= MODE_11NG_HT40
;
2532 phymode
= MODE_11NG_HT20
;
2533 } else if (ath10k_mac_sta_has_ofdm_only(sta
)) {
2540 case NL80211_BAND_5GHZ
:
2544 if (sta
->vht_cap
.vht_supported
&&
2545 !ath10k_peer_assoc_h_vht_masked(vht_mcs_mask
)) {
2546 if (sta
->bandwidth
== IEEE80211_STA_RX_BW_80
)
2547 phymode
= MODE_11AC_VHT80
;
2548 else if (sta
->bandwidth
== IEEE80211_STA_RX_BW_40
)
2549 phymode
= MODE_11AC_VHT40
;
2550 else if (sta
->bandwidth
== IEEE80211_STA_RX_BW_20
)
2551 phymode
= MODE_11AC_VHT20
;
2552 } else if (sta
->ht_cap
.ht_supported
&&
2553 !ath10k_peer_assoc_h_ht_masked(ht_mcs_mask
)) {
2554 if (sta
->bandwidth
>= IEEE80211_STA_RX_BW_40
)
2555 phymode
= MODE_11NA_HT40
;
2557 phymode
= MODE_11NA_HT20
;
2567 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac peer %pM phymode %s\n",
2568 sta
->addr
, ath10k_wmi_phymode_str(phymode
));
2570 arg
->peer_phymode
= phymode
;
2571 WARN_ON(phymode
== MODE_UNKNOWN
);
2574 static int ath10k_peer_assoc_prepare(struct ath10k
*ar
,
2575 struct ieee80211_vif
*vif
,
2576 struct ieee80211_sta
*sta
,
2577 struct wmi_peer_assoc_complete_arg
*arg
)
2579 lockdep_assert_held(&ar
->conf_mutex
);
2581 memset(arg
, 0, sizeof(*arg
));
2583 ath10k_peer_assoc_h_basic(ar
, vif
, sta
, arg
);
2584 ath10k_peer_assoc_h_crypto(ar
, vif
, sta
, arg
);
2585 ath10k_peer_assoc_h_rates(ar
, vif
, sta
, arg
);
2586 ath10k_peer_assoc_h_ht(ar
, vif
, sta
, arg
);
2587 ath10k_peer_assoc_h_vht(ar
, vif
, sta
, arg
);
2588 ath10k_peer_assoc_h_qos(ar
, vif
, sta
, arg
);
2589 ath10k_peer_assoc_h_phymode(ar
, vif
, sta
, arg
);
2594 static const u32 ath10k_smps_map
[] = {
2595 [WLAN_HT_CAP_SM_PS_STATIC
] = WMI_PEER_SMPS_STATIC
,
2596 [WLAN_HT_CAP_SM_PS_DYNAMIC
] = WMI_PEER_SMPS_DYNAMIC
,
2597 [WLAN_HT_CAP_SM_PS_INVALID
] = WMI_PEER_SMPS_PS_NONE
,
2598 [WLAN_HT_CAP_SM_PS_DISABLED
] = WMI_PEER_SMPS_PS_NONE
,
2601 static int ath10k_setup_peer_smps(struct ath10k
*ar
, struct ath10k_vif
*arvif
,
2603 const struct ieee80211_sta_ht_cap
*ht_cap
)
2607 if (!ht_cap
->ht_supported
)
2610 smps
= ht_cap
->cap
& IEEE80211_HT_CAP_SM_PS
;
2611 smps
>>= IEEE80211_HT_CAP_SM_PS_SHIFT
;
2613 if (smps
>= ARRAY_SIZE(ath10k_smps_map
))
2616 return ath10k_wmi_peer_set_param(ar
, arvif
->vdev_id
, addr
,
2617 WMI_PEER_SMPS_STATE
,
2618 ath10k_smps_map
[smps
]);
2621 static int ath10k_mac_vif_recalc_txbf(struct ath10k
*ar
,
2622 struct ieee80211_vif
*vif
,
2623 struct ieee80211_sta_vht_cap vht_cap
)
2625 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
2630 if (ath10k_wmi_get_txbf_conf_scheme(ar
) != WMI_TXBF_CONF_AFTER_ASSOC
)
2633 if (!(ar
->vht_cap_info
&
2634 (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE
|
2635 IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE
|
2636 IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE
|
2637 IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE
)))
2640 param
= ar
->wmi
.vdev_param
->txbf
;
2643 if (WARN_ON(param
== WMI_VDEV_PARAM_UNSUPPORTED
))
2646 /* The following logic is correct. If a remote STA advertises support
2647 * for being a beamformer then we should enable us being a beamformee.
2650 if (ar
->vht_cap_info
&
2651 (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE
|
2652 IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE
)) {
2653 if (vht_cap
.cap
& IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE
)
2654 value
|= WMI_VDEV_PARAM_TXBF_SU_TX_BFEE
;
2656 if (vht_cap
.cap
& IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE
)
2657 value
|= WMI_VDEV_PARAM_TXBF_MU_TX_BFEE
;
2660 if (ar
->vht_cap_info
&
2661 (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE
|
2662 IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE
)) {
2663 if (vht_cap
.cap
& IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE
)
2664 value
|= WMI_VDEV_PARAM_TXBF_SU_TX_BFER
;
2666 if (vht_cap
.cap
& IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE
)
2667 value
|= WMI_VDEV_PARAM_TXBF_MU_TX_BFER
;
2670 if (value
& WMI_VDEV_PARAM_TXBF_MU_TX_BFEE
)
2671 value
|= WMI_VDEV_PARAM_TXBF_SU_TX_BFEE
;
2673 if (value
& WMI_VDEV_PARAM_TXBF_MU_TX_BFER
)
2674 value
|= WMI_VDEV_PARAM_TXBF_SU_TX_BFER
;
2676 ret
= ath10k_wmi_vdev_set_param(ar
, arvif
->vdev_id
, param
, value
);
2678 ath10k_warn(ar
, "failed to submit vdev param txbf 0x%x: %d\n",
2686 /* can be called only in mac80211 callbacks due to `key_count` usage */
2687 static void ath10k_bss_assoc(struct ieee80211_hw
*hw
,
2688 struct ieee80211_vif
*vif
,
2689 struct ieee80211_bss_conf
*bss_conf
)
2691 struct ath10k
*ar
= hw
->priv
;
2692 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
2693 struct ieee80211_sta_ht_cap ht_cap
;
2694 struct ieee80211_sta_vht_cap vht_cap
;
2695 struct wmi_peer_assoc_complete_arg peer_arg
;
2696 struct ieee80211_sta
*ap_sta
;
2699 lockdep_assert_held(&ar
->conf_mutex
);
2701 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac vdev %i assoc bssid %pM aid %d\n",
2702 arvif
->vdev_id
, arvif
->bssid
, arvif
->aid
);
2706 ap_sta
= ieee80211_find_sta(vif
, bss_conf
->bssid
);
2708 ath10k_warn(ar
, "failed to find station entry for bss %pM vdev %i\n",
2709 bss_conf
->bssid
, arvif
->vdev_id
);
2714 /* ap_sta must be accessed only within rcu section which must be left
2715 * before calling ath10k_setup_peer_smps() which might sleep. */
2716 ht_cap
= ap_sta
->ht_cap
;
2717 vht_cap
= ap_sta
->vht_cap
;
2719 ret
= ath10k_peer_assoc_prepare(ar
, vif
, ap_sta
, &peer_arg
);
2721 ath10k_warn(ar
, "failed to prepare peer assoc for %pM vdev %i: %d\n",
2722 bss_conf
->bssid
, arvif
->vdev_id
, ret
);
2729 ret
= ath10k_wmi_peer_assoc(ar
, &peer_arg
);
2731 ath10k_warn(ar
, "failed to run peer assoc for %pM vdev %i: %d\n",
2732 bss_conf
->bssid
, arvif
->vdev_id
, ret
);
2736 ret
= ath10k_setup_peer_smps(ar
, arvif
, bss_conf
->bssid
, &ht_cap
);
2738 ath10k_warn(ar
, "failed to setup peer SMPS for vdev %i: %d\n",
2739 arvif
->vdev_id
, ret
);
2743 ret
= ath10k_mac_vif_recalc_txbf(ar
, vif
, vht_cap
);
2745 ath10k_warn(ar
, "failed to recalc txbf for vdev %i on bss %pM: %d\n",
2746 arvif
->vdev_id
, bss_conf
->bssid
, ret
);
2750 ath10k_dbg(ar
, ATH10K_DBG_MAC
,
2751 "mac vdev %d up (associated) bssid %pM aid %d\n",
2752 arvif
->vdev_id
, bss_conf
->bssid
, bss_conf
->aid
);
2754 WARN_ON(arvif
->is_up
);
2756 arvif
->aid
= bss_conf
->aid
;
2757 ether_addr_copy(arvif
->bssid
, bss_conf
->bssid
);
2759 ret
= ath10k_wmi_vdev_up(ar
, arvif
->vdev_id
, arvif
->aid
, arvif
->bssid
);
2761 ath10k_warn(ar
, "failed to set vdev %d up: %d\n",
2762 arvif
->vdev_id
, ret
);
2766 arvif
->is_up
= true;
2768 /* Workaround: Some firmware revisions (tested with qca6174
2769 * WLAN.RM.2.0-00073) have buggy powersave state machine and must be
2770 * poked with peer param command.
2772 ret
= ath10k_wmi_peer_set_param(ar
, arvif
->vdev_id
, arvif
->bssid
,
2773 WMI_PEER_DUMMY_VAR
, 1);
2775 ath10k_warn(ar
, "failed to poke peer %pM param for ps workaround on vdev %i: %d\n",
2776 arvif
->bssid
, arvif
->vdev_id
, ret
);
2781 static void ath10k_bss_disassoc(struct ieee80211_hw
*hw
,
2782 struct ieee80211_vif
*vif
)
2784 struct ath10k
*ar
= hw
->priv
;
2785 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
2786 struct ieee80211_sta_vht_cap vht_cap
= {};
2789 lockdep_assert_held(&ar
->conf_mutex
);
2791 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac vdev %i disassoc bssid %pM\n",
2792 arvif
->vdev_id
, arvif
->bssid
);
2794 ret
= ath10k_wmi_vdev_down(ar
, arvif
->vdev_id
);
2796 ath10k_warn(ar
, "faield to down vdev %i: %d\n",
2797 arvif
->vdev_id
, ret
);
2799 arvif
->def_wep_key_idx
= -1;
2801 ret
= ath10k_mac_vif_recalc_txbf(ar
, vif
, vht_cap
);
2803 ath10k_warn(ar
, "failed to recalc txbf for vdev %i: %d\n",
2804 arvif
->vdev_id
, ret
);
2808 arvif
->is_up
= false;
2810 cancel_delayed_work_sync(&arvif
->connection_loss_work
);
2813 static int ath10k_station_assoc(struct ath10k
*ar
,
2814 struct ieee80211_vif
*vif
,
2815 struct ieee80211_sta
*sta
,
2818 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
2819 struct wmi_peer_assoc_complete_arg peer_arg
;
2822 lockdep_assert_held(&ar
->conf_mutex
);
2824 ret
= ath10k_peer_assoc_prepare(ar
, vif
, sta
, &peer_arg
);
2826 ath10k_warn(ar
, "failed to prepare WMI peer assoc for %pM vdev %i: %i\n",
2827 sta
->addr
, arvif
->vdev_id
, ret
);
2831 ret
= ath10k_wmi_peer_assoc(ar
, &peer_arg
);
2833 ath10k_warn(ar
, "failed to run peer assoc for STA %pM vdev %i: %d\n",
2834 sta
->addr
, arvif
->vdev_id
, ret
);
2838 /* Re-assoc is run only to update supported rates for given station. It
2839 * doesn't make much sense to reconfigure the peer completely.
2842 ret
= ath10k_setup_peer_smps(ar
, arvif
, sta
->addr
,
2845 ath10k_warn(ar
, "failed to setup peer SMPS for vdev %d: %d\n",
2846 arvif
->vdev_id
, ret
);
2850 ret
= ath10k_peer_assoc_qos_ap(ar
, arvif
, sta
);
2852 ath10k_warn(ar
, "failed to set qos params for STA %pM for vdev %i: %d\n",
2853 sta
->addr
, arvif
->vdev_id
, ret
);
2858 arvif
->num_legacy_stations
++;
2859 ret
= ath10k_recalc_rtscts_prot(arvif
);
2861 ath10k_warn(ar
, "failed to recalculate rts/cts prot for vdev %d: %d\n",
2862 arvif
->vdev_id
, ret
);
2867 /* Plumb cached keys only for static WEP */
2868 if (arvif
->def_wep_key_idx
!= -1) {
2869 ret
= ath10k_install_peer_wep_keys(arvif
, sta
->addr
);
2871 ath10k_warn(ar
, "failed to install peer wep keys for vdev %i: %d\n",
2872 arvif
->vdev_id
, ret
);
2881 static int ath10k_station_disassoc(struct ath10k
*ar
,
2882 struct ieee80211_vif
*vif
,
2883 struct ieee80211_sta
*sta
)
2885 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
2888 lockdep_assert_held(&ar
->conf_mutex
);
2891 arvif
->num_legacy_stations
--;
2892 ret
= ath10k_recalc_rtscts_prot(arvif
);
2894 ath10k_warn(ar
, "failed to recalculate rts/cts prot for vdev %d: %d\n",
2895 arvif
->vdev_id
, ret
);
2900 ret
= ath10k_clear_peer_keys(arvif
, sta
->addr
);
2902 ath10k_warn(ar
, "failed to clear all peer wep keys for vdev %i: %d\n",
2903 arvif
->vdev_id
, ret
);
2914 static int ath10k_update_channel_list(struct ath10k
*ar
)
2916 struct ieee80211_hw
*hw
= ar
->hw
;
2917 struct ieee80211_supported_band
**bands
;
2918 enum nl80211_band band
;
2919 struct ieee80211_channel
*channel
;
2920 struct wmi_scan_chan_list_arg arg
= {0};
2921 struct wmi_channel_arg
*ch
;
2927 lockdep_assert_held(&ar
->conf_mutex
);
2929 bands
= hw
->wiphy
->bands
;
2930 for (band
= 0; band
< NUM_NL80211_BANDS
; band
++) {
2934 for (i
= 0; i
< bands
[band
]->n_channels
; i
++) {
2935 if (bands
[band
]->channels
[i
].flags
&
2936 IEEE80211_CHAN_DISABLED
)
2943 len
= sizeof(struct wmi_channel_arg
) * arg
.n_channels
;
2944 arg
.channels
= kzalloc(len
, GFP_KERNEL
);
2949 for (band
= 0; band
< NUM_NL80211_BANDS
; band
++) {
2953 for (i
= 0; i
< bands
[band
]->n_channels
; i
++) {
2954 channel
= &bands
[band
]->channels
[i
];
2956 if (channel
->flags
& IEEE80211_CHAN_DISABLED
)
2959 ch
->allow_ht
= true;
2961 /* FIXME: when should we really allow VHT? */
2962 ch
->allow_vht
= true;
2965 !(channel
->flags
& IEEE80211_CHAN_NO_IR
);
2968 !(channel
->flags
& IEEE80211_CHAN_NO_HT40PLUS
);
2971 !!(channel
->flags
& IEEE80211_CHAN_RADAR
);
2973 passive
= channel
->flags
& IEEE80211_CHAN_NO_IR
;
2974 ch
->passive
= passive
;
2976 ch
->freq
= channel
->center_freq
;
2977 ch
->band_center_freq1
= channel
->center_freq
;
2979 ch
->max_power
= channel
->max_power
* 2;
2980 ch
->max_reg_power
= channel
->max_reg_power
* 2;
2981 ch
->max_antenna_gain
= channel
->max_antenna_gain
* 2;
2982 ch
->reg_class_id
= 0; /* FIXME */
2984 /* FIXME: why use only legacy modes, why not any
2985 * HT/VHT modes? Would that even make any
2987 if (channel
->band
== NL80211_BAND_2GHZ
)
2988 ch
->mode
= MODE_11G
;
2990 ch
->mode
= MODE_11A
;
2992 if (WARN_ON_ONCE(ch
->mode
== MODE_UNKNOWN
))
2995 ath10k_dbg(ar
, ATH10K_DBG_WMI
,
2996 "mac channel [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
2997 ch
- arg
.channels
, arg
.n_channels
,
2998 ch
->freq
, ch
->max_power
, ch
->max_reg_power
,
2999 ch
->max_antenna_gain
, ch
->mode
);
3005 ret
= ath10k_wmi_scan_chan_list(ar
, &arg
);
3006 kfree(arg
.channels
);
3011 static enum wmi_dfs_region
3012 ath10k_mac_get_dfs_region(enum nl80211_dfs_regions dfs_region
)
3014 switch (dfs_region
) {
3015 case NL80211_DFS_UNSET
:
3016 return WMI_UNINIT_DFS_DOMAIN
;
3017 case NL80211_DFS_FCC
:
3018 return WMI_FCC_DFS_DOMAIN
;
3019 case NL80211_DFS_ETSI
:
3020 return WMI_ETSI_DFS_DOMAIN
;
3021 case NL80211_DFS_JP
:
3022 return WMI_MKK4_DFS_DOMAIN
;
3024 return WMI_UNINIT_DFS_DOMAIN
;
3027 static void ath10k_regd_update(struct ath10k
*ar
)
3029 struct reg_dmn_pair_mapping
*regpair
;
3031 enum wmi_dfs_region wmi_dfs_reg
;
3032 enum nl80211_dfs_regions nl_dfs_reg
;
3034 lockdep_assert_held(&ar
->conf_mutex
);
3036 ret
= ath10k_update_channel_list(ar
);
3038 ath10k_warn(ar
, "failed to update channel list: %d\n", ret
);
3040 regpair
= ar
->ath_common
.regulatory
.regpair
;
3042 if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED
) && ar
->dfs_detector
) {
3043 nl_dfs_reg
= ar
->dfs_detector
->region
;
3044 wmi_dfs_reg
= ath10k_mac_get_dfs_region(nl_dfs_reg
);
3046 wmi_dfs_reg
= WMI_UNINIT_DFS_DOMAIN
;
3049 /* Target allows setting up per-band regdomain but ath_common provides
3050 * a combined one only */
3051 ret
= ath10k_wmi_pdev_set_regdomain(ar
,
3052 regpair
->reg_domain
,
3053 regpair
->reg_domain
, /* 2ghz */
3054 regpair
->reg_domain
, /* 5ghz */
3055 regpair
->reg_2ghz_ctl
,
3056 regpair
->reg_5ghz_ctl
,
3059 ath10k_warn(ar
, "failed to set pdev regdomain: %d\n", ret
);
3062 static void ath10k_reg_notifier(struct wiphy
*wiphy
,
3063 struct regulatory_request
*request
)
3065 struct ieee80211_hw
*hw
= wiphy_to_ieee80211_hw(wiphy
);
3066 struct ath10k
*ar
= hw
->priv
;
3069 ath_reg_notifier_apply(wiphy
, request
, &ar
->ath_common
.regulatory
);
3071 if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED
) && ar
->dfs_detector
) {
3072 ath10k_dbg(ar
, ATH10K_DBG_REGULATORY
, "dfs region 0x%x\n",
3073 request
->dfs_region
);
3074 result
= ar
->dfs_detector
->set_dfs_domain(ar
->dfs_detector
,
3075 request
->dfs_region
);
3077 ath10k_warn(ar
, "DFS region 0x%X not supported, will trigger radar for every pulse\n",
3078 request
->dfs_region
);
3081 mutex_lock(&ar
->conf_mutex
);
3082 if (ar
->state
== ATH10K_STATE_ON
)
3083 ath10k_regd_update(ar
);
3084 mutex_unlock(&ar
->conf_mutex
);
3091 enum ath10k_mac_tx_path
{
3093 ATH10K_MAC_TX_HTT_MGMT
,
3094 ATH10K_MAC_TX_WMI_MGMT
,
3095 ATH10K_MAC_TX_UNKNOWN
,
3098 void ath10k_mac_tx_lock(struct ath10k
*ar
, int reason
)
3100 lockdep_assert_held(&ar
->htt
.tx_lock
);
3102 WARN_ON(reason
>= ATH10K_TX_PAUSE_MAX
);
3103 ar
->tx_paused
|= BIT(reason
);
3104 ieee80211_stop_queues(ar
->hw
);
3107 static void ath10k_mac_tx_unlock_iter(void *data
, u8
*mac
,
3108 struct ieee80211_vif
*vif
)
3110 struct ath10k
*ar
= data
;
3111 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
3113 if (arvif
->tx_paused
)
3116 ieee80211_wake_queue(ar
->hw
, arvif
->vdev_id
);
3119 void ath10k_mac_tx_unlock(struct ath10k
*ar
, int reason
)
3121 lockdep_assert_held(&ar
->htt
.tx_lock
);
3123 WARN_ON(reason
>= ATH10K_TX_PAUSE_MAX
);
3124 ar
->tx_paused
&= ~BIT(reason
);
3129 ieee80211_iterate_active_interfaces_atomic(ar
->hw
,
3130 IEEE80211_IFACE_ITER_RESUME_ALL
,
3131 ath10k_mac_tx_unlock_iter
,
3134 ieee80211_wake_queue(ar
->hw
, ar
->hw
->offchannel_tx_hw_queue
);
3137 void ath10k_mac_vif_tx_lock(struct ath10k_vif
*arvif
, int reason
)
3139 struct ath10k
*ar
= arvif
->ar
;
3141 lockdep_assert_held(&ar
->htt
.tx_lock
);
3143 WARN_ON(reason
>= BITS_PER_LONG
);
3144 arvif
->tx_paused
|= BIT(reason
);
3145 ieee80211_stop_queue(ar
->hw
, arvif
->vdev_id
);
3148 void ath10k_mac_vif_tx_unlock(struct ath10k_vif
*arvif
, int reason
)
3150 struct ath10k
*ar
= arvif
->ar
;
3152 lockdep_assert_held(&ar
->htt
.tx_lock
);
3154 WARN_ON(reason
>= BITS_PER_LONG
);
3155 arvif
->tx_paused
&= ~BIT(reason
);
3160 if (arvif
->tx_paused
)
3163 ieee80211_wake_queue(ar
->hw
, arvif
->vdev_id
);
3166 static void ath10k_mac_vif_handle_tx_pause(struct ath10k_vif
*arvif
,
3167 enum wmi_tlv_tx_pause_id pause_id
,
3168 enum wmi_tlv_tx_pause_action action
)
3170 struct ath10k
*ar
= arvif
->ar
;
3172 lockdep_assert_held(&ar
->htt
.tx_lock
);
3175 case WMI_TLV_TX_PAUSE_ACTION_STOP
:
3176 ath10k_mac_vif_tx_lock(arvif
, pause_id
);
3178 case WMI_TLV_TX_PAUSE_ACTION_WAKE
:
3179 ath10k_mac_vif_tx_unlock(arvif
, pause_id
);
3182 ath10k_warn(ar
, "received unknown tx pause action %d on vdev %i, ignoring\n",
3183 action
, arvif
->vdev_id
);
3188 struct ath10k_mac_tx_pause
{
3190 enum wmi_tlv_tx_pause_id pause_id
;
3191 enum wmi_tlv_tx_pause_action action
;
3194 static void ath10k_mac_handle_tx_pause_iter(void *data
, u8
*mac
,
3195 struct ieee80211_vif
*vif
)
3197 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
3198 struct ath10k_mac_tx_pause
*arg
= data
;
3200 if (arvif
->vdev_id
!= arg
->vdev_id
)
3203 ath10k_mac_vif_handle_tx_pause(arvif
, arg
->pause_id
, arg
->action
);
3206 void ath10k_mac_handle_tx_pause_vdev(struct ath10k
*ar
, u32 vdev_id
,
3207 enum wmi_tlv_tx_pause_id pause_id
,
3208 enum wmi_tlv_tx_pause_action action
)
3210 struct ath10k_mac_tx_pause arg
= {
3212 .pause_id
= pause_id
,
3216 spin_lock_bh(&ar
->htt
.tx_lock
);
3217 ieee80211_iterate_active_interfaces_atomic(ar
->hw
,
3218 IEEE80211_IFACE_ITER_RESUME_ALL
,
3219 ath10k_mac_handle_tx_pause_iter
,
3221 spin_unlock_bh(&ar
->htt
.tx_lock
);
3224 static enum ath10k_hw_txrx_mode
3225 ath10k_mac_tx_h_get_txmode(struct ath10k
*ar
,
3226 struct ieee80211_vif
*vif
,
3227 struct ieee80211_sta
*sta
,
3228 struct sk_buff
*skb
)
3230 const struct ieee80211_hdr
*hdr
= (void *)skb
->data
;
3231 __le16 fc
= hdr
->frame_control
;
3233 if (!vif
|| vif
->type
== NL80211_IFTYPE_MONITOR
)
3234 return ATH10K_HW_TXRX_RAW
;
3236 if (ieee80211_is_mgmt(fc
))
3237 return ATH10K_HW_TXRX_MGMT
;
3241 * NullFunc frames are mostly used to ping if a client or AP are still
3242 * reachable and responsive. This implies tx status reports must be
3243 * accurate - otherwise either mac80211 or userspace (e.g. hostapd) can
3244 * come to a conclusion that the other end disappeared and tear down
3245 * BSS connection or it can never disconnect from BSS/client (which is
3248 * Firmware with HTT older than 3.0 delivers incorrect tx status for
3249 * NullFunc frames to driver. However there's a HTT Mgmt Tx command
3250 * which seems to deliver correct tx reports for NullFunc frames. The
3251 * downside of using it is it ignores client powersave state so it can
3252 * end up disconnecting sleeping clients in AP mode. It should fix STA
3253 * mode though because AP don't sleep.
3255 if (ar
->htt
.target_version_major
< 3 &&
3256 (ieee80211_is_nullfunc(fc
) || ieee80211_is_qos_nullfunc(fc
)) &&
3257 !test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX
,
3258 ar
->running_fw
->fw_file
.fw_features
) &&
3259 !test_bit(ATH10K_FW_FEATURE_SKIP_NULL_FUNC_WAR
,
3260 ar
->running_fw
->fw_file
.fw_features
))
3261 return ATH10K_HW_TXRX_MGMT
;
3265 * Some wmi-tlv firmwares for qca6174 have broken Tx key selection for
3266 * NativeWifi txmode - it selects AP key instead of peer key. It seems
3267 * to work with Ethernet txmode so use it.
3269 * FIXME: Check if raw mode works with TDLS.
3271 if (ieee80211_is_data_present(fc
) && sta
&& sta
->tdls
)
3272 return ATH10K_HW_TXRX_ETHERNET
;
3274 if (test_bit(ATH10K_FLAG_RAW_MODE
, &ar
->dev_flags
))
3275 return ATH10K_HW_TXRX_RAW
;
3277 return ATH10K_HW_TXRX_NATIVE_WIFI
;
3280 static bool ath10k_tx_h_use_hwcrypto(struct ieee80211_vif
*vif
,
3281 struct sk_buff
*skb
)
3283 const struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
3284 const struct ieee80211_hdr
*hdr
= (void *)skb
->data
;
3285 const u32 mask
= IEEE80211_TX_INTFL_DONT_ENCRYPT
|
3286 IEEE80211_TX_CTL_INJECTED
;
3288 if (!ieee80211_has_protected(hdr
->frame_control
))
3291 if ((info
->flags
& mask
) == mask
)
3295 return !ath10k_vif_to_arvif(vif
)->nohwcrypt
;
3300 /* HTT Tx uses Native Wifi tx mode which expects 802.11 frames without QoS
3301 * Control in the header.
3303 static void ath10k_tx_h_nwifi(struct ieee80211_hw
*hw
, struct sk_buff
*skb
)
3305 struct ieee80211_hdr
*hdr
= (void *)skb
->data
;
3306 struct ath10k_skb_cb
*cb
= ATH10K_SKB_CB(skb
);
3309 if (!ieee80211_is_data_qos(hdr
->frame_control
))
3312 qos_ctl
= ieee80211_get_qos_ctl(hdr
);
3313 memmove(skb
->data
+ IEEE80211_QOS_CTL_LEN
,
3314 skb
->data
, (void *)qos_ctl
- (void *)skb
->data
);
3315 skb_pull(skb
, IEEE80211_QOS_CTL_LEN
);
3317 /* Some firmware revisions don't handle sending QoS NullFunc well.
3318 * These frames are mainly used for CQM purposes so it doesn't really
3319 * matter whether QoS NullFunc or NullFunc are sent.
3321 hdr
= (void *)skb
->data
;
3322 if (ieee80211_is_qos_nullfunc(hdr
->frame_control
))
3323 cb
->flags
&= ~ATH10K_SKB_F_QOS
;
3325 hdr
->frame_control
&= ~__cpu_to_le16(IEEE80211_STYPE_QOS_DATA
);
3328 static void ath10k_tx_h_8023(struct sk_buff
*skb
)
3330 struct ieee80211_hdr
*hdr
;
3331 struct rfc1042_hdr
*rfc1042
;
3338 hdr
= (void *)skb
->data
;
3339 hdrlen
= ieee80211_hdrlen(hdr
->frame_control
);
3340 rfc1042
= (void *)skb
->data
+ hdrlen
;
3342 ether_addr_copy(da
, ieee80211_get_DA(hdr
));
3343 ether_addr_copy(sa
, ieee80211_get_SA(hdr
));
3344 type
= rfc1042
->snap_type
;
3346 skb_pull(skb
, hdrlen
+ sizeof(*rfc1042
));
3347 skb_push(skb
, sizeof(*eth
));
3349 eth
= (void *)skb
->data
;
3350 ether_addr_copy(eth
->h_dest
, da
);
3351 ether_addr_copy(eth
->h_source
, sa
);
3352 eth
->h_proto
= type
;
3355 static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k
*ar
,
3356 struct ieee80211_vif
*vif
,
3357 struct sk_buff
*skb
)
3359 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)skb
->data
;
3360 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
3362 /* This is case only for P2P_GO */
3363 if (vif
->type
!= NL80211_IFTYPE_AP
|| !vif
->p2p
)
3366 if (unlikely(ieee80211_is_probe_resp(hdr
->frame_control
))) {
3367 spin_lock_bh(&ar
->data_lock
);
3368 if (arvif
->u
.ap
.noa_data
)
3369 if (!pskb_expand_head(skb
, 0, arvif
->u
.ap
.noa_len
,
3371 memcpy(skb_put(skb
, arvif
->u
.ap
.noa_len
),
3372 arvif
->u
.ap
.noa_data
,
3373 arvif
->u
.ap
.noa_len
);
3374 spin_unlock_bh(&ar
->data_lock
);
3378 static void ath10k_mac_tx_h_fill_cb(struct ath10k
*ar
,
3379 struct ieee80211_vif
*vif
,
3380 struct ieee80211_txq
*txq
,
3381 struct sk_buff
*skb
)
3383 struct ieee80211_hdr
*hdr
= (void *)skb
->data
;
3384 struct ath10k_skb_cb
*cb
= ATH10K_SKB_CB(skb
);
3387 if (!ath10k_tx_h_use_hwcrypto(vif
, skb
))
3388 cb
->flags
|= ATH10K_SKB_F_NO_HWCRYPT
;
3390 if (ieee80211_is_mgmt(hdr
->frame_control
))
3391 cb
->flags
|= ATH10K_SKB_F_MGMT
;
3393 if (ieee80211_is_data_qos(hdr
->frame_control
))
3394 cb
->flags
|= ATH10K_SKB_F_QOS
;
3400 bool ath10k_mac_tx_frm_has_freq(struct ath10k
*ar
)
3402 /* FIXME: Not really sure since when the behaviour changed. At some
3403 * point new firmware stopped requiring creation of peer entries for
3404 * offchannel tx (and actually creating them causes issues with wmi-htc
3405 * tx credit replenishment and reliability). Assuming it's at least 3.4
3406 * because that's when the `freq` was introduced to TX_FRM HTT command.
3408 return (ar
->htt
.target_version_major
>= 3 &&
3409 ar
->htt
.target_version_minor
>= 4 &&
3410 ar
->running_fw
->fw_file
.htt_op_version
== ATH10K_FW_HTT_OP_VERSION_TLV
);
3413 static int ath10k_mac_tx_wmi_mgmt(struct ath10k
*ar
, struct sk_buff
*skb
)
3415 struct sk_buff_head
*q
= &ar
->wmi_mgmt_tx_queue
;
3418 spin_lock_bh(&ar
->data_lock
);
3420 if (skb_queue_len(q
) == ATH10K_MAX_NUM_MGMT_PENDING
) {
3421 ath10k_warn(ar
, "wmi mgmt tx queue is full\n");
3426 __skb_queue_tail(q
, skb
);
3427 ieee80211_queue_work(ar
->hw
, &ar
->wmi_mgmt_tx_work
);
3430 spin_unlock_bh(&ar
->data_lock
);
3435 static enum ath10k_mac_tx_path
3436 ath10k_mac_tx_h_get_txpath(struct ath10k
*ar
,
3437 struct sk_buff
*skb
,
3438 enum ath10k_hw_txrx_mode txmode
)
3441 case ATH10K_HW_TXRX_RAW
:
3442 case ATH10K_HW_TXRX_NATIVE_WIFI
:
3443 case ATH10K_HW_TXRX_ETHERNET
:
3444 return ATH10K_MAC_TX_HTT
;
3445 case ATH10K_HW_TXRX_MGMT
:
3446 if (test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX
,
3447 ar
->running_fw
->fw_file
.fw_features
))
3448 return ATH10K_MAC_TX_WMI_MGMT
;
3449 else if (ar
->htt
.target_version_major
>= 3)
3450 return ATH10K_MAC_TX_HTT
;
3452 return ATH10K_MAC_TX_HTT_MGMT
;
3455 return ATH10K_MAC_TX_UNKNOWN
;
3458 static int ath10k_mac_tx_submit(struct ath10k
*ar
,
3459 enum ath10k_hw_txrx_mode txmode
,
3460 enum ath10k_mac_tx_path txpath
,
3461 struct sk_buff
*skb
)
3463 struct ath10k_htt
*htt
= &ar
->htt
;
3467 case ATH10K_MAC_TX_HTT
:
3468 ret
= ath10k_htt_tx(htt
, txmode
, skb
);
3470 case ATH10K_MAC_TX_HTT_MGMT
:
3471 ret
= ath10k_htt_mgmt_tx(htt
, skb
);
3473 case ATH10K_MAC_TX_WMI_MGMT
:
3474 ret
= ath10k_mac_tx_wmi_mgmt(ar
, skb
);
3476 case ATH10K_MAC_TX_UNKNOWN
:
3483 ath10k_warn(ar
, "failed to transmit packet, dropping: %d\n",
3485 ieee80211_free_txskb(ar
->hw
, skb
);
3491 /* This function consumes the sk_buff regardless of return value as far as
3492 * caller is concerned so no freeing is necessary afterwards.
3494 static int ath10k_mac_tx(struct ath10k
*ar
,
3495 struct ieee80211_vif
*vif
,
3496 struct ieee80211_sta
*sta
,
3497 enum ath10k_hw_txrx_mode txmode
,
3498 enum ath10k_mac_tx_path txpath
,
3499 struct sk_buff
*skb
)
3501 struct ieee80211_hw
*hw
= ar
->hw
;
3502 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
3505 /* We should disable CCK RATE due to P2P */
3506 if (info
->flags
& IEEE80211_TX_CTL_NO_CCK_RATE
)
3507 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "IEEE80211_TX_CTL_NO_CCK_RATE\n");
3510 case ATH10K_HW_TXRX_MGMT
:
3511 case ATH10K_HW_TXRX_NATIVE_WIFI
:
3512 ath10k_tx_h_nwifi(hw
, skb
);
3513 ath10k_tx_h_add_p2p_noa_ie(ar
, vif
, skb
);
3514 ath10k_tx_h_seq_no(vif
, skb
);
3516 case ATH10K_HW_TXRX_ETHERNET
:
3517 ath10k_tx_h_8023(skb
);
3519 case ATH10K_HW_TXRX_RAW
:
3520 if (!test_bit(ATH10K_FLAG_RAW_MODE
, &ar
->dev_flags
)) {
3522 ieee80211_free_txskb(hw
, skb
);
3527 if (info
->flags
& IEEE80211_TX_CTL_TX_OFFCHAN
) {
3528 if (!ath10k_mac_tx_frm_has_freq(ar
)) {
3529 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "queued offchannel skb %pK\n",
3532 skb_queue_tail(&ar
->offchan_tx_queue
, skb
);
3533 ieee80211_queue_work(hw
, &ar
->offchan_tx_work
);
3538 ret
= ath10k_mac_tx_submit(ar
, txmode
, txpath
, skb
);
3540 ath10k_warn(ar
, "failed to submit frame: %d\n", ret
);
3547 void ath10k_offchan_tx_purge(struct ath10k
*ar
)
3549 struct sk_buff
*skb
;
3552 skb
= skb_dequeue(&ar
->offchan_tx_queue
);
3556 ieee80211_free_txskb(ar
->hw
, skb
);
3560 void ath10k_offchan_tx_work(struct work_struct
*work
)
3562 struct ath10k
*ar
= container_of(work
, struct ath10k
, offchan_tx_work
);
3563 struct ath10k_peer
*peer
;
3564 struct ath10k_vif
*arvif
;
3565 enum ath10k_hw_txrx_mode txmode
;
3566 enum ath10k_mac_tx_path txpath
;
3567 struct ieee80211_hdr
*hdr
;
3568 struct ieee80211_vif
*vif
;
3569 struct ieee80211_sta
*sta
;
3570 struct sk_buff
*skb
;
3571 const u8
*peer_addr
;
3574 unsigned long time_left
;
3575 bool tmp_peer_created
= false;
3577 /* FW requirement: We must create a peer before FW will send out
3578 * an offchannel frame. Otherwise the frame will be stuck and
3579 * never transmitted. We delete the peer upon tx completion.
3580 * It is unlikely that a peer for offchannel tx will already be
3581 * present. However it may be in some rare cases so account for that.
3582 * Otherwise we might remove a legitimate peer and break stuff. */
3585 skb
= skb_dequeue(&ar
->offchan_tx_queue
);
3589 mutex_lock(&ar
->conf_mutex
);
3591 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac offchannel skb %pK\n",
3594 hdr
= (struct ieee80211_hdr
*)skb
->data
;
3595 peer_addr
= ieee80211_get_DA(hdr
);
3597 spin_lock_bh(&ar
->data_lock
);
3598 vdev_id
= ar
->scan
.vdev_id
;
3599 peer
= ath10k_peer_find(ar
, vdev_id
, peer_addr
);
3600 spin_unlock_bh(&ar
->data_lock
);
3603 /* FIXME: should this use ath10k_warn()? */
3604 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "peer %pM on vdev %d already present\n",
3605 peer_addr
, vdev_id
);
3608 ret
= ath10k_peer_create(ar
, NULL
, NULL
, vdev_id
,
3610 WMI_PEER_TYPE_DEFAULT
);
3612 ath10k_warn(ar
, "failed to create peer %pM on vdev %d: %d\n",
3613 peer_addr
, vdev_id
, ret
);
3614 tmp_peer_created
= (ret
== 0);
3617 spin_lock_bh(&ar
->data_lock
);
3618 reinit_completion(&ar
->offchan_tx_completed
);
3619 ar
->offchan_tx_skb
= skb
;
3620 spin_unlock_bh(&ar
->data_lock
);
3622 /* It's safe to access vif and sta - conf_mutex guarantees that
3623 * sta_state() and remove_interface() are locked exclusively
3624 * out wrt to this offchannel worker.
3626 arvif
= ath10k_get_arvif(ar
, vdev_id
);
3629 sta
= ieee80211_find_sta(vif
, peer_addr
);
3635 txmode
= ath10k_mac_tx_h_get_txmode(ar
, vif
, sta
, skb
);
3636 txpath
= ath10k_mac_tx_h_get_txpath(ar
, skb
, txmode
);
3638 ret
= ath10k_mac_tx(ar
, vif
, sta
, txmode
, txpath
, skb
);
3640 ath10k_warn(ar
, "failed to transmit offchannel frame: %d\n",
3646 wait_for_completion_timeout(&ar
->offchan_tx_completed
, 3 * HZ
);
3648 ath10k_warn(ar
, "timed out waiting for offchannel skb %pK\n",
3651 if (!peer
&& tmp_peer_created
) {
3652 ret
= ath10k_peer_delete(ar
, vdev_id
, peer_addr
);
3654 ath10k_warn(ar
, "failed to delete peer %pM on vdev %d: %d\n",
3655 peer_addr
, vdev_id
, ret
);
3658 mutex_unlock(&ar
->conf_mutex
);
3662 void ath10k_mgmt_over_wmi_tx_purge(struct ath10k
*ar
)
3664 struct sk_buff
*skb
;
3667 skb
= skb_dequeue(&ar
->wmi_mgmt_tx_queue
);
3671 ieee80211_free_txskb(ar
->hw
, skb
);
3675 void ath10k_mgmt_over_wmi_tx_work(struct work_struct
*work
)
3677 struct ath10k
*ar
= container_of(work
, struct ath10k
, wmi_mgmt_tx_work
);
3678 struct sk_buff
*skb
;
3682 skb
= skb_dequeue(&ar
->wmi_mgmt_tx_queue
);
3686 ret
= ath10k_wmi_mgmt_tx(ar
, skb
);
3688 ath10k_warn(ar
, "failed to transmit management frame via WMI: %d\n",
3690 ieee80211_free_txskb(ar
->hw
, skb
);
3695 static void ath10k_mac_txq_init(struct ieee80211_txq
*txq
)
3697 struct ath10k_txq
*artxq
;
3702 artxq
= (void *)txq
->drv_priv
;
3703 INIT_LIST_HEAD(&artxq
->list
);
3706 static void ath10k_mac_txq_unref(struct ath10k
*ar
, struct ieee80211_txq
*txq
)
3708 struct ath10k_txq
*artxq
;
3709 struct ath10k_skb_cb
*cb
;
3710 struct sk_buff
*msdu
;
3716 artxq
= (void *)txq
->drv_priv
;
3717 spin_lock_bh(&ar
->txqs_lock
);
3718 if (!list_empty(&artxq
->list
))
3719 list_del_init(&artxq
->list
);
3720 spin_unlock_bh(&ar
->txqs_lock
);
3722 spin_lock_bh(&ar
->htt
.tx_lock
);
3723 idr_for_each_entry(&ar
->htt
.pending_tx
, msdu
, msdu_id
) {
3724 cb
= ATH10K_SKB_CB(msdu
);
3728 spin_unlock_bh(&ar
->htt
.tx_lock
);
3731 struct ieee80211_txq
*ath10k_mac_txq_lookup(struct ath10k
*ar
,
3735 struct ath10k_peer
*peer
;
3737 lockdep_assert_held(&ar
->data_lock
);
3739 peer
= ar
->peer_map
[peer_id
];
3744 return peer
->sta
->txq
[tid
];
3746 return peer
->vif
->txq
;
3751 static bool ath10k_mac_tx_can_push(struct ieee80211_hw
*hw
,
3752 struct ieee80211_txq
*txq
)
3754 struct ath10k
*ar
= hw
->priv
;
3755 struct ath10k_txq
*artxq
= (void *)txq
->drv_priv
;
3757 /* No need to get locks */
3759 if (ar
->htt
.tx_q_state
.mode
== HTT_TX_MODE_SWITCH_PUSH
)
3762 if (ar
->htt
.num_pending_tx
< ar
->htt
.tx_q_state
.num_push_allowed
)
3765 if (artxq
->num_fw_queued
< artxq
->num_push_allowed
)
3771 int ath10k_mac_tx_push_txq(struct ieee80211_hw
*hw
,
3772 struct ieee80211_txq
*txq
)
3774 struct ath10k
*ar
= hw
->priv
;
3775 struct ath10k_htt
*htt
= &ar
->htt
;
3776 struct ath10k_txq
*artxq
= (void *)txq
->drv_priv
;
3777 struct ieee80211_vif
*vif
= txq
->vif
;
3778 struct ieee80211_sta
*sta
= txq
->sta
;
3779 enum ath10k_hw_txrx_mode txmode
;
3780 enum ath10k_mac_tx_path txpath
;
3781 struct sk_buff
*skb
;
3782 struct ieee80211_hdr
*hdr
;
3784 bool is_mgmt
, is_presp
;
3787 spin_lock_bh(&ar
->htt
.tx_lock
);
3788 ret
= ath10k_htt_tx_inc_pending(htt
);
3789 spin_unlock_bh(&ar
->htt
.tx_lock
);
3794 skb
= ieee80211_tx_dequeue(hw
, txq
);
3796 spin_lock_bh(&ar
->htt
.tx_lock
);
3797 ath10k_htt_tx_dec_pending(htt
);
3798 spin_unlock_bh(&ar
->htt
.tx_lock
);
3803 ath10k_mac_tx_h_fill_cb(ar
, vif
, txq
, skb
);
3806 txmode
= ath10k_mac_tx_h_get_txmode(ar
, vif
, sta
, skb
);
3807 txpath
= ath10k_mac_tx_h_get_txpath(ar
, skb
, txmode
);
3808 is_mgmt
= (txpath
== ATH10K_MAC_TX_HTT_MGMT
);
3811 hdr
= (struct ieee80211_hdr
*)skb
->data
;
3812 is_presp
= ieee80211_is_probe_resp(hdr
->frame_control
);
3814 spin_lock_bh(&ar
->htt
.tx_lock
);
3815 ret
= ath10k_htt_tx_mgmt_inc_pending(htt
, is_mgmt
, is_presp
);
3818 ath10k_htt_tx_dec_pending(htt
);
3819 spin_unlock_bh(&ar
->htt
.tx_lock
);
3822 spin_unlock_bh(&ar
->htt
.tx_lock
);
3825 ret
= ath10k_mac_tx(ar
, vif
, sta
, txmode
, txpath
, skb
);
3826 if (unlikely(ret
)) {
3827 ath10k_warn(ar
, "failed to push frame: %d\n", ret
);
3829 spin_lock_bh(&ar
->htt
.tx_lock
);
3830 ath10k_htt_tx_dec_pending(htt
);
3832 ath10k_htt_tx_mgmt_dec_pending(htt
);
3833 spin_unlock_bh(&ar
->htt
.tx_lock
);
3838 spin_lock_bh(&ar
->htt
.tx_lock
);
3839 artxq
->num_fw_queued
++;
3840 spin_unlock_bh(&ar
->htt
.tx_lock
);
3845 void ath10k_mac_tx_push_pending(struct ath10k
*ar
)
3847 struct ieee80211_hw
*hw
= ar
->hw
;
3848 struct ieee80211_txq
*txq
;
3849 struct ath10k_txq
*artxq
;
3850 struct ath10k_txq
*last
;
3854 if (ar
->htt
.num_pending_tx
>= (ar
->htt
.max_num_pending_tx
/ 2))
3857 spin_lock_bh(&ar
->txqs_lock
);
3860 last
= list_last_entry(&ar
->txqs
, struct ath10k_txq
, list
);
3861 while (!list_empty(&ar
->txqs
)) {
3862 artxq
= list_first_entry(&ar
->txqs
, struct ath10k_txq
, list
);
3863 txq
= container_of((void *)artxq
, struct ieee80211_txq
,
3866 /* Prevent aggressive sta/tid taking over tx queue */
3869 while (ath10k_mac_tx_can_push(hw
, txq
) && max
--) {
3870 ret
= ath10k_mac_tx_push_txq(hw
, txq
);
3875 list_del_init(&artxq
->list
);
3877 list_add_tail(&artxq
->list
, &ar
->txqs
);
3879 ath10k_htt_tx_txq_update(hw
, txq
);
3881 if (artxq
== last
|| (ret
< 0 && ret
!= -ENOENT
))
3886 spin_unlock_bh(&ar
->txqs_lock
);
3893 void __ath10k_scan_finish(struct ath10k
*ar
)
3895 lockdep_assert_held(&ar
->data_lock
);
3897 switch (ar
->scan
.state
) {
3898 case ATH10K_SCAN_IDLE
:
3900 case ATH10K_SCAN_RUNNING
:
3901 case ATH10K_SCAN_ABORTING
:
3902 if (!ar
->scan
.is_roc
) {
3903 struct cfg80211_scan_info info
= {
3904 .aborted
= (ar
->scan
.state
==
3905 ATH10K_SCAN_ABORTING
),
3908 ieee80211_scan_completed(ar
->hw
, &info
);
3909 } else if (ar
->scan
.roc_notify
) {
3910 ieee80211_remain_on_channel_expired(ar
->hw
);
3913 case ATH10K_SCAN_STARTING
:
3914 ar
->scan
.state
= ATH10K_SCAN_IDLE
;
3915 ar
->scan_channel
= NULL
;
3916 ar
->scan
.roc_freq
= 0;
3917 ath10k_offchan_tx_purge(ar
);
3918 cancel_delayed_work(&ar
->scan
.timeout
);
3919 complete(&ar
->scan
.completed
);
3924 void ath10k_scan_finish(struct ath10k
*ar
)
3926 spin_lock_bh(&ar
->data_lock
);
3927 __ath10k_scan_finish(ar
);
3928 spin_unlock_bh(&ar
->data_lock
);
3931 static int ath10k_scan_stop(struct ath10k
*ar
)
3933 struct wmi_stop_scan_arg arg
= {
3934 .req_id
= 1, /* FIXME */
3935 .req_type
= WMI_SCAN_STOP_ONE
,
3936 .u
.scan_id
= ATH10K_SCAN_ID
,
3940 lockdep_assert_held(&ar
->conf_mutex
);
3942 ret
= ath10k_wmi_stop_scan(ar
, &arg
);
3944 ath10k_warn(ar
, "failed to stop wmi scan: %d\n", ret
);
3948 ret
= wait_for_completion_timeout(&ar
->scan
.completed
, 3 * HZ
);
3950 ath10k_warn(ar
, "failed to receive scan abortion completion: timed out\n");
3952 } else if (ret
> 0) {
3957 /* Scan state should be updated upon scan completion but in case
3958 * firmware fails to deliver the event (for whatever reason) it is
3959 * desired to clean up scan state anyway. Firmware may have just
3960 * dropped the scan completion event delivery due to transport pipe
3961 * being overflown with data and/or it can recover on its own before
3962 * next scan request is submitted.
3964 spin_lock_bh(&ar
->data_lock
);
3965 if (ar
->scan
.state
!= ATH10K_SCAN_IDLE
)
3966 __ath10k_scan_finish(ar
);
3967 spin_unlock_bh(&ar
->data_lock
);
3972 static void ath10k_scan_abort(struct ath10k
*ar
)
3976 lockdep_assert_held(&ar
->conf_mutex
);
3978 spin_lock_bh(&ar
->data_lock
);
3980 switch (ar
->scan
.state
) {
3981 case ATH10K_SCAN_IDLE
:
3982 /* This can happen if timeout worker kicked in and called
3983 * abortion while scan completion was being processed.
3986 case ATH10K_SCAN_STARTING
:
3987 case ATH10K_SCAN_ABORTING
:
3988 ath10k_warn(ar
, "refusing scan abortion due to invalid scan state: %s (%d)\n",
3989 ath10k_scan_state_str(ar
->scan
.state
),
3992 case ATH10K_SCAN_RUNNING
:
3993 ar
->scan
.state
= ATH10K_SCAN_ABORTING
;
3994 spin_unlock_bh(&ar
->data_lock
);
3996 ret
= ath10k_scan_stop(ar
);
3998 ath10k_warn(ar
, "failed to abort scan: %d\n", ret
);
4000 spin_lock_bh(&ar
->data_lock
);
4004 spin_unlock_bh(&ar
->data_lock
);
4007 void ath10k_scan_timeout_work(struct work_struct
*work
)
4009 struct ath10k
*ar
= container_of(work
, struct ath10k
,
4012 mutex_lock(&ar
->conf_mutex
);
4013 ath10k_scan_abort(ar
);
4014 mutex_unlock(&ar
->conf_mutex
);
4017 static int ath10k_start_scan(struct ath10k
*ar
,
4018 const struct wmi_start_scan_arg
*arg
)
4022 lockdep_assert_held(&ar
->conf_mutex
);
4024 ret
= ath10k_wmi_start_scan(ar
, arg
);
4028 ret
= wait_for_completion_timeout(&ar
->scan
.started
, 1 * HZ
);
4030 ret
= ath10k_scan_stop(ar
);
4032 ath10k_warn(ar
, "failed to stop scan: %d\n", ret
);
4037 /* If we failed to start the scan, return error code at
4038 * this point. This is probably due to some issue in the
4039 * firmware, but no need to wedge the driver due to that...
4041 spin_lock_bh(&ar
->data_lock
);
4042 if (ar
->scan
.state
== ATH10K_SCAN_IDLE
) {
4043 spin_unlock_bh(&ar
->data_lock
);
4046 spin_unlock_bh(&ar
->data_lock
);
4051 /**********************/
4052 /* mac80211 callbacks */
4053 /**********************/
4055 static void ath10k_mac_op_tx(struct ieee80211_hw
*hw
,
4056 struct ieee80211_tx_control
*control
,
4057 struct sk_buff
*skb
)
4059 struct ath10k
*ar
= hw
->priv
;
4060 struct ath10k_htt
*htt
= &ar
->htt
;
4061 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
4062 struct ieee80211_vif
*vif
= info
->control
.vif
;
4063 struct ieee80211_sta
*sta
= control
->sta
;
4064 struct ieee80211_txq
*txq
= NULL
;
4065 struct ieee80211_hdr
*hdr
= (void *)skb
->data
;
4066 enum ath10k_hw_txrx_mode txmode
;
4067 enum ath10k_mac_tx_path txpath
;
4073 ath10k_mac_tx_h_fill_cb(ar
, vif
, txq
, skb
);
4075 txmode
= ath10k_mac_tx_h_get_txmode(ar
, vif
, sta
, skb
);
4076 txpath
= ath10k_mac_tx_h_get_txpath(ar
, skb
, txmode
);
4077 is_htt
= (txpath
== ATH10K_MAC_TX_HTT
||
4078 txpath
== ATH10K_MAC_TX_HTT_MGMT
);
4079 is_mgmt
= (txpath
== ATH10K_MAC_TX_HTT_MGMT
);
4082 spin_lock_bh(&ar
->htt
.tx_lock
);
4083 is_presp
= ieee80211_is_probe_resp(hdr
->frame_control
);
4085 ret
= ath10k_htt_tx_inc_pending(htt
);
4087 ath10k_warn(ar
, "failed to increase tx pending count: %d, dropping\n",
4089 spin_unlock_bh(&ar
->htt
.tx_lock
);
4090 ieee80211_free_txskb(ar
->hw
, skb
);
4094 ret
= ath10k_htt_tx_mgmt_inc_pending(htt
, is_mgmt
, is_presp
);
4096 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "failed to increase tx mgmt pending count: %d, dropping\n",
4098 ath10k_htt_tx_dec_pending(htt
);
4099 spin_unlock_bh(&ar
->htt
.tx_lock
);
4100 ieee80211_free_txskb(ar
->hw
, skb
);
4103 spin_unlock_bh(&ar
->htt
.tx_lock
);
4106 ret
= ath10k_mac_tx(ar
, vif
, sta
, txmode
, txpath
, skb
);
4108 ath10k_warn(ar
, "failed to transmit frame: %d\n", ret
);
4110 spin_lock_bh(&ar
->htt
.tx_lock
);
4111 ath10k_htt_tx_dec_pending(htt
);
4113 ath10k_htt_tx_mgmt_dec_pending(htt
);
4114 spin_unlock_bh(&ar
->htt
.tx_lock
);
4120 static void ath10k_mac_op_wake_tx_queue(struct ieee80211_hw
*hw
,
4121 struct ieee80211_txq
*txq
)
4123 struct ath10k
*ar
= hw
->priv
;
4124 struct ath10k_txq
*artxq
= (void *)txq
->drv_priv
;
4125 struct ieee80211_txq
*f_txq
;
4126 struct ath10k_txq
*f_artxq
;
4130 spin_lock_bh(&ar
->txqs_lock
);
4131 if (list_empty(&artxq
->list
))
4132 list_add_tail(&artxq
->list
, &ar
->txqs
);
4134 f_artxq
= list_first_entry(&ar
->txqs
, struct ath10k_txq
, list
);
4135 f_txq
= container_of((void *)f_artxq
, struct ieee80211_txq
, drv_priv
);
4136 list_del_init(&f_artxq
->list
);
4138 while (ath10k_mac_tx_can_push(hw
, f_txq
) && max
--) {
4139 ret
= ath10k_mac_tx_push_txq(hw
, f_txq
);
4144 list_add_tail(&f_artxq
->list
, &ar
->txqs
);
4145 spin_unlock_bh(&ar
->txqs_lock
);
4147 ath10k_htt_tx_txq_update(hw
, f_txq
);
4148 ath10k_htt_tx_txq_update(hw
, txq
);
4151 /* Must not be called with conf_mutex held as workers can use that also. */
4152 void ath10k_drain_tx(struct ath10k
*ar
)
4154 /* make sure rcu-protected mac80211 tx path itself is drained */
4157 ath10k_offchan_tx_purge(ar
);
4158 ath10k_mgmt_over_wmi_tx_purge(ar
);
4160 cancel_work_sync(&ar
->offchan_tx_work
);
4161 cancel_work_sync(&ar
->wmi_mgmt_tx_work
);
4164 void ath10k_halt(struct ath10k
*ar
)
4166 struct ath10k_vif
*arvif
;
4168 lockdep_assert_held(&ar
->conf_mutex
);
4170 clear_bit(ATH10K_CAC_RUNNING
, &ar
->dev_flags
);
4171 ar
->filter_flags
= 0;
4172 ar
->monitor
= false;
4173 ar
->monitor_arvif
= NULL
;
4175 if (ar
->monitor_started
)
4176 ath10k_monitor_stop(ar
);
4178 ar
->monitor_started
= false;
4181 ath10k_scan_finish(ar
);
4182 ath10k_peer_cleanup_all(ar
);
4183 ath10k_core_stop(ar
);
4184 ath10k_hif_power_down(ar
);
4186 spin_lock_bh(&ar
->data_lock
);
4187 list_for_each_entry(arvif
, &ar
->arvifs
, list
)
4188 ath10k_mac_vif_beacon_cleanup(arvif
);
4189 spin_unlock_bh(&ar
->data_lock
);
4192 static int ath10k_get_antenna(struct ieee80211_hw
*hw
, u32
*tx_ant
, u32
*rx_ant
)
4194 struct ath10k
*ar
= hw
->priv
;
4196 mutex_lock(&ar
->conf_mutex
);
4198 *tx_ant
= ar
->cfg_tx_chainmask
;
4199 *rx_ant
= ar
->cfg_rx_chainmask
;
4201 mutex_unlock(&ar
->conf_mutex
);
4206 static void ath10k_check_chain_mask(struct ath10k
*ar
, u32 cm
, const char *dbg
)
4208 /* It is not clear that allowing gaps in chainmask
4209 * is helpful. Probably it will not do what user
4210 * is hoping for, so warn in that case.
4212 if (cm
== 15 || cm
== 7 || cm
== 3 || cm
== 1 || cm
== 0)
4215 ath10k_warn(ar
, "mac %s antenna chainmask may be invalid: 0x%x. Suggested values: 15, 7, 3, 1 or 0.\n",
4219 static int ath10k_mac_get_vht_cap_bf_sts(struct ath10k
*ar
)
4221 int nsts
= ar
->vht_cap_info
;
4223 nsts
&= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK
;
4224 nsts
>>= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT
;
4226 /* If firmware does not deliver to host number of space-time
4227 * streams supported, assume it support up to 4 BF STS and return
4228 * the value for VHT CAP: nsts-1)
4236 static int ath10k_mac_get_vht_cap_bf_sound_dim(struct ath10k
*ar
)
4238 int sound_dim
= ar
->vht_cap_info
;
4240 sound_dim
&= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK
;
4241 sound_dim
>>= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT
;
4243 /* If the sounding dimension is not advertised by the firmware,
4244 * let's use a default value of 1
4252 static struct ieee80211_sta_vht_cap
ath10k_create_vht_cap(struct ath10k
*ar
)
4254 struct ieee80211_sta_vht_cap vht_cap
= {0};
4259 vht_cap
.vht_supported
= 1;
4260 vht_cap
.cap
= ar
->vht_cap_info
;
4262 if (ar
->vht_cap_info
& (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE
|
4263 IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE
)) {
4264 val
= ath10k_mac_get_vht_cap_bf_sts(ar
);
4265 val
<<= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT
;
4266 val
&= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK
;
4271 if (ar
->vht_cap_info
& (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE
|
4272 IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE
)) {
4273 val
= ath10k_mac_get_vht_cap_bf_sound_dim(ar
);
4274 val
<<= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT
;
4275 val
&= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK
;
4281 for (i
= 0; i
< 8; i
++) {
4282 if ((i
< ar
->num_rf_chains
) && (ar
->cfg_tx_chainmask
& BIT(i
)))
4283 mcs_map
|= IEEE80211_VHT_MCS_SUPPORT_0_9
<< (i
* 2);
4285 mcs_map
|= IEEE80211_VHT_MCS_NOT_SUPPORTED
<< (i
* 2);
4288 if (ar
->cfg_tx_chainmask
<= 1)
4289 vht_cap
.cap
&= ~IEEE80211_VHT_CAP_TXSTBC
;
4291 vht_cap
.vht_mcs
.rx_mcs_map
= cpu_to_le16(mcs_map
);
4292 vht_cap
.vht_mcs
.tx_mcs_map
= cpu_to_le16(mcs_map
);
4297 static struct ieee80211_sta_ht_cap
ath10k_get_ht_cap(struct ath10k
*ar
)
4300 struct ieee80211_sta_ht_cap ht_cap
= {0};
4302 if (!(ar
->ht_cap_info
& WMI_HT_CAP_ENABLED
))
4305 ht_cap
.ht_supported
= 1;
4306 ht_cap
.ampdu_factor
= IEEE80211_HT_MAX_AMPDU_64K
;
4307 ht_cap
.ampdu_density
= IEEE80211_HT_MPDU_DENSITY_8
;
4308 ht_cap
.cap
|= IEEE80211_HT_CAP_SUP_WIDTH_20_40
;
4309 ht_cap
.cap
|= IEEE80211_HT_CAP_DSSSCCK40
;
4311 WLAN_HT_CAP_SM_PS_DISABLED
<< IEEE80211_HT_CAP_SM_PS_SHIFT
;
4313 if (ar
->ht_cap_info
& WMI_HT_CAP_HT20_SGI
)
4314 ht_cap
.cap
|= IEEE80211_HT_CAP_SGI_20
;
4316 if (ar
->ht_cap_info
& WMI_HT_CAP_HT40_SGI
)
4317 ht_cap
.cap
|= IEEE80211_HT_CAP_SGI_40
;
4319 if (ar
->ht_cap_info
& WMI_HT_CAP_DYNAMIC_SMPS
) {
4322 smps
= WLAN_HT_CAP_SM_PS_DYNAMIC
;
4323 smps
<<= IEEE80211_HT_CAP_SM_PS_SHIFT
;
4328 if (ar
->ht_cap_info
& WMI_HT_CAP_TX_STBC
&& (ar
->cfg_tx_chainmask
> 1))
4329 ht_cap
.cap
|= IEEE80211_HT_CAP_TX_STBC
;
4331 if (ar
->ht_cap_info
& WMI_HT_CAP_RX_STBC
) {
4334 stbc
= ar
->ht_cap_info
;
4335 stbc
&= WMI_HT_CAP_RX_STBC
;
4336 stbc
>>= WMI_HT_CAP_RX_STBC_MASK_SHIFT
;
4337 stbc
<<= IEEE80211_HT_CAP_RX_STBC_SHIFT
;
4338 stbc
&= IEEE80211_HT_CAP_RX_STBC
;
4343 if (ar
->ht_cap_info
& WMI_HT_CAP_LDPC
)
4344 ht_cap
.cap
|= IEEE80211_HT_CAP_LDPC_CODING
;
4346 if (ar
->ht_cap_info
& WMI_HT_CAP_L_SIG_TXOP_PROT
)
4347 ht_cap
.cap
|= IEEE80211_HT_CAP_LSIG_TXOP_PROT
;
4349 /* max AMSDU is implicitly taken from vht_cap_info */
4350 if (ar
->vht_cap_info
& WMI_VHT_CAP_MAX_MPDU_LEN_MASK
)
4351 ht_cap
.cap
|= IEEE80211_HT_CAP_MAX_AMSDU
;
4353 for (i
= 0; i
< ar
->num_rf_chains
; i
++) {
4354 if (ar
->cfg_rx_chainmask
& BIT(i
))
4355 ht_cap
.mcs
.rx_mask
[i
] = 0xFF;
4358 ht_cap
.mcs
.tx_params
|= IEEE80211_HT_MCS_TX_DEFINED
;
4363 static void ath10k_mac_setup_ht_vht_cap(struct ath10k
*ar
)
4365 struct ieee80211_supported_band
*band
;
4366 struct ieee80211_sta_vht_cap vht_cap
;
4367 struct ieee80211_sta_ht_cap ht_cap
;
4369 ht_cap
= ath10k_get_ht_cap(ar
);
4370 vht_cap
= ath10k_create_vht_cap(ar
);
4372 if (ar
->phy_capability
& WHAL_WLAN_11G_CAPABILITY
) {
4373 band
= &ar
->mac
.sbands
[NL80211_BAND_2GHZ
];
4374 band
->ht_cap
= ht_cap
;
4376 if (ar
->phy_capability
& WHAL_WLAN_11A_CAPABILITY
) {
4377 band
= &ar
->mac
.sbands
[NL80211_BAND_5GHZ
];
4378 band
->ht_cap
= ht_cap
;
4379 band
->vht_cap
= vht_cap
;
4383 static int __ath10k_set_antenna(struct ath10k
*ar
, u32 tx_ant
, u32 rx_ant
)
4387 lockdep_assert_held(&ar
->conf_mutex
);
4389 ath10k_check_chain_mask(ar
, tx_ant
, "tx");
4390 ath10k_check_chain_mask(ar
, rx_ant
, "rx");
4392 ar
->cfg_tx_chainmask
= tx_ant
;
4393 ar
->cfg_rx_chainmask
= rx_ant
;
4395 if ((ar
->state
!= ATH10K_STATE_ON
) &&
4396 (ar
->state
!= ATH10K_STATE_RESTARTED
))
4399 ret
= ath10k_wmi_pdev_set_param(ar
, ar
->wmi
.pdev_param
->tx_chain_mask
,
4402 ath10k_warn(ar
, "failed to set tx-chainmask: %d, req 0x%x\n",
4407 ret
= ath10k_wmi_pdev_set_param(ar
, ar
->wmi
.pdev_param
->rx_chain_mask
,
4410 ath10k_warn(ar
, "failed to set rx-chainmask: %d, req 0x%x\n",
4415 /* Reload HT/VHT capability */
4416 ath10k_mac_setup_ht_vht_cap(ar
);
4421 static int ath10k_set_antenna(struct ieee80211_hw
*hw
, u32 tx_ant
, u32 rx_ant
)
4423 struct ath10k
*ar
= hw
->priv
;
4426 mutex_lock(&ar
->conf_mutex
);
4427 ret
= __ath10k_set_antenna(ar
, tx_ant
, rx_ant
);
4428 mutex_unlock(&ar
->conf_mutex
);
4432 static int ath10k_start(struct ieee80211_hw
*hw
)
4434 struct ath10k
*ar
= hw
->priv
;
4439 * This makes sense only when restarting hw. It is harmless to call
4440 * unconditionally. This is necessary to make sure no HTT/WMI tx
4441 * commands will be submitted while restarting.
4443 ath10k_drain_tx(ar
);
4445 mutex_lock(&ar
->conf_mutex
);
4447 switch (ar
->state
) {
4448 case ATH10K_STATE_OFF
:
4449 ar
->state
= ATH10K_STATE_ON
;
4451 case ATH10K_STATE_RESTARTING
:
4453 ar
->state
= ATH10K_STATE_RESTARTED
;
4455 case ATH10K_STATE_ON
:
4456 case ATH10K_STATE_RESTARTED
:
4457 case ATH10K_STATE_WEDGED
:
4461 case ATH10K_STATE_UTF
:
4466 ret
= ath10k_hif_power_up(ar
);
4468 ath10k_err(ar
, "Could not init hif: %d\n", ret
);
4472 ret
= ath10k_core_start(ar
, ATH10K_FIRMWARE_MODE_NORMAL
,
4473 &ar
->normal_mode_fw
);
4475 ath10k_err(ar
, "Could not init core: %d\n", ret
);
4476 goto err_power_down
;
4479 param
= ar
->wmi
.pdev_param
->pmf_qos
;
4480 ret
= ath10k_wmi_pdev_set_param(ar
, param
, 1);
4482 ath10k_warn(ar
, "failed to enable PMF QOS: %d\n", ret
);
4486 param
= ar
->wmi
.pdev_param
->dynamic_bw
;
4487 ret
= ath10k_wmi_pdev_set_param(ar
, param
, 1);
4489 ath10k_warn(ar
, "failed to enable dynamic BW: %d\n", ret
);
4493 if (test_bit(WMI_SERVICE_ADAPTIVE_OCS
, ar
->wmi
.svc_map
)) {
4494 ret
= ath10k_wmi_adaptive_qcs(ar
, true);
4496 ath10k_warn(ar
, "failed to enable adaptive qcs: %d\n",
4502 if (test_bit(WMI_SERVICE_BURST
, ar
->wmi
.svc_map
)) {
4503 param
= ar
->wmi
.pdev_param
->burst_enable
;
4504 ret
= ath10k_wmi_pdev_set_param(ar
, param
, 0);
4506 ath10k_warn(ar
, "failed to disable burst: %d\n", ret
);
4511 __ath10k_set_antenna(ar
, ar
->cfg_tx_chainmask
, ar
->cfg_rx_chainmask
);
4514 * By default FW set ARP frames ac to voice (6). In that case ARP
4515 * exchange is not working properly for UAPSD enabled AP. ARP requests
4516 * which arrives with access category 0 are processed by network stack
4517 * and send back with access category 0, but FW changes access category
4518 * to 6. Set ARP frames access category to best effort (0) solves
4522 param
= ar
->wmi
.pdev_param
->arp_ac_override
;
4523 ret
= ath10k_wmi_pdev_set_param(ar
, param
, 0);
4525 ath10k_warn(ar
, "failed to set arp ac override parameter: %d\n",
4530 if (test_bit(ATH10K_FW_FEATURE_SUPPORTS_ADAPTIVE_CCA
,
4531 ar
->running_fw
->fw_file
.fw_features
)) {
4532 ret
= ath10k_wmi_pdev_enable_adaptive_cca(ar
, 1,
4533 WMI_CCA_DETECT_LEVEL_AUTO
,
4534 WMI_CCA_DETECT_MARGIN_AUTO
);
4536 ath10k_warn(ar
, "failed to enable adaptive cca: %d\n",
4542 param
= ar
->wmi
.pdev_param
->ani_enable
;
4543 ret
= ath10k_wmi_pdev_set_param(ar
, param
, 1);
4545 ath10k_warn(ar
, "failed to enable ani by default: %d\n",
4550 ar
->ani_enabled
= true;
4552 if (ath10k_peer_stats_enabled(ar
)) {
4553 param
= ar
->wmi
.pdev_param
->peer_stats_update_period
;
4554 ret
= ath10k_wmi_pdev_set_param(ar
, param
,
4555 PEER_DEFAULT_STATS_UPDATE_PERIOD
);
4558 "failed to set peer stats period : %d\n",
4564 param
= ar
->wmi
.pdev_param
->enable_btcoex
;
4565 if (test_bit(WMI_SERVICE_COEX_GPIO
, ar
->wmi
.svc_map
) &&
4566 test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM
,
4567 ar
->running_fw
->fw_file
.fw_features
)) {
4568 ret
= ath10k_wmi_pdev_set_param(ar
, param
, 0);
4571 "failed to set btcoex param: %d\n", ret
);
4574 clear_bit(ATH10K_FLAG_BTCOEX
, &ar
->dev_flags
);
4577 ar
->num_started_vdevs
= 0;
4578 ath10k_regd_update(ar
);
4580 ath10k_spectral_start(ar
);
4581 ath10k_thermal_set_throttling(ar
);
4583 mutex_unlock(&ar
->conf_mutex
);
4587 ath10k_core_stop(ar
);
4590 ath10k_hif_power_down(ar
);
4593 ar
->state
= ATH10K_STATE_OFF
;
4596 mutex_unlock(&ar
->conf_mutex
);
4600 static void ath10k_stop(struct ieee80211_hw
*hw
)
4602 struct ath10k
*ar
= hw
->priv
;
4604 ath10k_drain_tx(ar
);
4606 mutex_lock(&ar
->conf_mutex
);
4607 if (ar
->state
!= ATH10K_STATE_OFF
) {
4609 ar
->state
= ATH10K_STATE_OFF
;
4611 mutex_unlock(&ar
->conf_mutex
);
4613 cancel_delayed_work_sync(&ar
->scan
.timeout
);
4614 cancel_work_sync(&ar
->restart_work
);
4617 static int ath10k_config_ps(struct ath10k
*ar
)
4619 struct ath10k_vif
*arvif
;
4622 lockdep_assert_held(&ar
->conf_mutex
);
4624 list_for_each_entry(arvif
, &ar
->arvifs
, list
) {
4625 ret
= ath10k_mac_vif_setup_ps(arvif
);
4627 ath10k_warn(ar
, "failed to setup powersave: %d\n", ret
);
4635 static int ath10k_mac_txpower_setup(struct ath10k
*ar
, int txpower
)
4640 lockdep_assert_held(&ar
->conf_mutex
);
4642 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac txpower %d\n", txpower
);
4644 param
= ar
->wmi
.pdev_param
->txpower_limit2g
;
4645 ret
= ath10k_wmi_pdev_set_param(ar
, param
, txpower
* 2);
4647 ath10k_warn(ar
, "failed to set 2g txpower %d: %d\n",
4652 param
= ar
->wmi
.pdev_param
->txpower_limit5g
;
4653 ret
= ath10k_wmi_pdev_set_param(ar
, param
, txpower
* 2);
4655 ath10k_warn(ar
, "failed to set 5g txpower %d: %d\n",
4663 static int ath10k_mac_txpower_recalc(struct ath10k
*ar
)
4665 struct ath10k_vif
*arvif
;
4666 int ret
, txpower
= -1;
4668 lockdep_assert_held(&ar
->conf_mutex
);
4670 list_for_each_entry(arvif
, &ar
->arvifs
, list
) {
4671 WARN_ON(arvif
->txpower
< 0);
4674 txpower
= arvif
->txpower
;
4676 txpower
= min(txpower
, arvif
->txpower
);
4679 if (WARN_ON(txpower
== -1))
4682 ret
= ath10k_mac_txpower_setup(ar
, txpower
);
4684 ath10k_warn(ar
, "failed to setup tx power %d: %d\n",
4692 static int ath10k_config(struct ieee80211_hw
*hw
, u32 changed
)
4694 struct ath10k
*ar
= hw
->priv
;
4695 struct ieee80211_conf
*conf
= &hw
->conf
;
4698 mutex_lock(&ar
->conf_mutex
);
4700 if (changed
& IEEE80211_CONF_CHANGE_PS
)
4701 ath10k_config_ps(ar
);
4703 if (changed
& IEEE80211_CONF_CHANGE_MONITOR
) {
4704 ar
->monitor
= conf
->flags
& IEEE80211_CONF_MONITOR
;
4705 ret
= ath10k_monitor_recalc(ar
);
4707 ath10k_warn(ar
, "failed to recalc monitor: %d\n", ret
);
4710 mutex_unlock(&ar
->conf_mutex
);
4714 static u32
get_nss_from_chainmask(u16 chain_mask
)
4716 if ((chain_mask
& 0xf) == 0xf)
4718 else if ((chain_mask
& 0x7) == 0x7)
4720 else if ((chain_mask
& 0x3) == 0x3)
4725 static int ath10k_mac_set_txbf_conf(struct ath10k_vif
*arvif
)
4728 struct ath10k
*ar
= arvif
->ar
;
4732 if (ath10k_wmi_get_txbf_conf_scheme(ar
) != WMI_TXBF_CONF_BEFORE_ASSOC
)
4735 nsts
= ath10k_mac_get_vht_cap_bf_sts(ar
);
4736 if (ar
->vht_cap_info
& (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE
|
4737 IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE
))
4738 value
|= SM(nsts
, WMI_TXBF_STS_CAP_OFFSET
);
4740 sound_dim
= ath10k_mac_get_vht_cap_bf_sound_dim(ar
);
4741 if (ar
->vht_cap_info
& (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE
|
4742 IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE
))
4743 value
|= SM(sound_dim
, WMI_BF_SOUND_DIM_OFFSET
);
4748 if (ar
->vht_cap_info
& IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE
)
4749 value
|= WMI_VDEV_PARAM_TXBF_SU_TX_BFER
;
4751 if (ar
->vht_cap_info
& IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE
)
4752 value
|= (WMI_VDEV_PARAM_TXBF_MU_TX_BFER
|
4753 WMI_VDEV_PARAM_TXBF_SU_TX_BFER
);
4755 if (ar
->vht_cap_info
& IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE
)
4756 value
|= WMI_VDEV_PARAM_TXBF_SU_TX_BFEE
;
4758 if (ar
->vht_cap_info
& IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE
)
4759 value
|= (WMI_VDEV_PARAM_TXBF_MU_TX_BFEE
|
4760 WMI_VDEV_PARAM_TXBF_SU_TX_BFEE
);
4762 return ath10k_wmi_vdev_set_param(ar
, arvif
->vdev_id
,
4763 ar
->wmi
.vdev_param
->txbf
, value
);
4768 * Figure out how to handle WMI_VDEV_SUBTYPE_P2P_DEVICE,
4769 * because we will send mgmt frames without CCK. This requirement
4770 * for P2P_FIND/GO_NEG should be handled by checking CCK flag
4773 static int ath10k_add_interface(struct ieee80211_hw
*hw
,
4774 struct ieee80211_vif
*vif
)
4776 struct ath10k
*ar
= hw
->priv
;
4777 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
4778 struct ath10k_peer
*peer
;
4779 enum wmi_sta_powersave_param param
;
4786 vif
->driver_flags
|= IEEE80211_VIF_SUPPORTS_UAPSD
;
4788 mutex_lock(&ar
->conf_mutex
);
4790 memset(arvif
, 0, sizeof(*arvif
));
4791 ath10k_mac_txq_init(vif
->txq
);
4796 INIT_LIST_HEAD(&arvif
->list
);
4797 INIT_WORK(&arvif
->ap_csa_work
, ath10k_mac_vif_ap_csa_work
);
4798 INIT_DELAYED_WORK(&arvif
->connection_loss_work
,
4799 ath10k_mac_vif_sta_connection_loss_work
);
4801 for (i
= 0; i
< ARRAY_SIZE(arvif
->bitrate_mask
.control
); i
++) {
4802 arvif
->bitrate_mask
.control
[i
].legacy
= 0xffffffff;
4803 memset(arvif
->bitrate_mask
.control
[i
].ht_mcs
, 0xff,
4804 sizeof(arvif
->bitrate_mask
.control
[i
].ht_mcs
));
4805 memset(arvif
->bitrate_mask
.control
[i
].vht_mcs
, 0xff,
4806 sizeof(arvif
->bitrate_mask
.control
[i
].vht_mcs
));
4809 if (ar
->num_peers
>= ar
->max_num_peers
) {
4810 ath10k_warn(ar
, "refusing vdev creation due to insufficient peer entry resources in firmware\n");
4815 if (ar
->free_vdev_map
== 0) {
4816 ath10k_warn(ar
, "Free vdev map is empty, no more interfaces allowed.\n");
4820 bit
= __ffs64(ar
->free_vdev_map
);
4822 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac create vdev %i map %llx\n",
4823 bit
, ar
->free_vdev_map
);
4825 arvif
->vdev_id
= bit
;
4826 arvif
->vdev_subtype
=
4827 ath10k_wmi_get_vdev_subtype(ar
, WMI_VDEV_SUBTYPE_NONE
);
4829 switch (vif
->type
) {
4830 case NL80211_IFTYPE_P2P_DEVICE
:
4831 arvif
->vdev_type
= WMI_VDEV_TYPE_STA
;
4832 arvif
->vdev_subtype
= ath10k_wmi_get_vdev_subtype
4833 (ar
, WMI_VDEV_SUBTYPE_P2P_DEVICE
);
4835 case NL80211_IFTYPE_UNSPECIFIED
:
4836 case NL80211_IFTYPE_STATION
:
4837 arvif
->vdev_type
= WMI_VDEV_TYPE_STA
;
4839 arvif
->vdev_subtype
= ath10k_wmi_get_vdev_subtype
4840 (ar
, WMI_VDEV_SUBTYPE_P2P_CLIENT
);
4842 case NL80211_IFTYPE_ADHOC
:
4843 arvif
->vdev_type
= WMI_VDEV_TYPE_IBSS
;
4845 case NL80211_IFTYPE_MESH_POINT
:
4846 if (test_bit(WMI_SERVICE_MESH_11S
, ar
->wmi
.svc_map
)) {
4847 arvif
->vdev_subtype
= ath10k_wmi_get_vdev_subtype
4848 (ar
, WMI_VDEV_SUBTYPE_MESH_11S
);
4849 } else if (!test_bit(ATH10K_FLAG_RAW_MODE
, &ar
->dev_flags
)) {
4851 ath10k_warn(ar
, "must load driver with rawmode=1 to add mesh interfaces\n");
4854 arvif
->vdev_type
= WMI_VDEV_TYPE_AP
;
4856 case NL80211_IFTYPE_AP
:
4857 arvif
->vdev_type
= WMI_VDEV_TYPE_AP
;
4860 arvif
->vdev_subtype
= ath10k_wmi_get_vdev_subtype
4861 (ar
, WMI_VDEV_SUBTYPE_P2P_GO
);
4863 case NL80211_IFTYPE_MONITOR
:
4864 arvif
->vdev_type
= WMI_VDEV_TYPE_MONITOR
;
4871 /* Using vdev_id as queue number will make it very easy to do per-vif
4872 * tx queue locking. This shouldn't wrap due to interface combinations
4873 * but do a modulo for correctness sake and prevent using offchannel tx
4874 * queues for regular vif tx.
4876 vif
->cab_queue
= arvif
->vdev_id
% (IEEE80211_MAX_QUEUES
- 1);
4877 for (i
= 0; i
< ARRAY_SIZE(vif
->hw_queue
); i
++)
4878 vif
->hw_queue
[i
] = arvif
->vdev_id
% (IEEE80211_MAX_QUEUES
- 1);
4880 /* Some firmware revisions don't wait for beacon tx completion before
4881 * sending another SWBA event. This could lead to hardware using old
4882 * (freed) beacon data in some cases, e.g. tx credit starvation
4883 * combined with missed TBTT. This is very very rare.
4885 * On non-IOMMU-enabled hosts this could be a possible security issue
4886 * because hw could beacon some random data on the air. On
4887 * IOMMU-enabled hosts DMAR faults would occur in most cases and target
4888 * device would crash.
4890 * Since there are no beacon tx completions (implicit nor explicit)
4891 * propagated to host the only workaround for this is to allocate a
4892 * DMA-coherent buffer for a lifetime of a vif and use it for all
4893 * beacon tx commands. Worst case for this approach is some beacons may
4894 * become corrupted, e.g. have garbled IEs or out-of-date TIM bitmap.
4896 if (vif
->type
== NL80211_IFTYPE_ADHOC
||
4897 vif
->type
== NL80211_IFTYPE_MESH_POINT
||
4898 vif
->type
== NL80211_IFTYPE_AP
) {
4899 arvif
->beacon_buf
= dma_zalloc_coherent(ar
->dev
,
4900 IEEE80211_MAX_FRAME_LEN
,
4901 &arvif
->beacon_paddr
,
4903 if (!arvif
->beacon_buf
) {
4905 ath10k_warn(ar
, "failed to allocate beacon buffer: %d\n",
4910 if (test_bit(ATH10K_FLAG_HW_CRYPTO_DISABLED
, &ar
->dev_flags
))
4911 arvif
->nohwcrypt
= true;
4913 if (arvif
->nohwcrypt
&&
4914 !test_bit(ATH10K_FLAG_RAW_MODE
, &ar
->dev_flags
)) {
4915 ath10k_warn(ar
, "cryptmode module param needed for sw crypto\n");
4919 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac vdev create %d (add interface) type %d subtype %d bcnmode %s\n",
4920 arvif
->vdev_id
, arvif
->vdev_type
, arvif
->vdev_subtype
,
4921 arvif
->beacon_buf
? "single-buf" : "per-skb");
4923 ret
= ath10k_wmi_vdev_create(ar
, arvif
->vdev_id
, arvif
->vdev_type
,
4924 arvif
->vdev_subtype
, vif
->addr
);
4926 ath10k_warn(ar
, "failed to create WMI vdev %i: %d\n",
4927 arvif
->vdev_id
, ret
);
4931 ar
->free_vdev_map
&= ~(1LL << arvif
->vdev_id
);
4932 list_add(&arvif
->list
, &ar
->arvifs
);
4934 /* It makes no sense to have firmware do keepalives. mac80211 already
4935 * takes care of this with idle connection polling.
4937 ret
= ath10k_mac_vif_disable_keepalive(arvif
);
4939 ath10k_warn(ar
, "failed to disable keepalive on vdev %i: %d\n",
4940 arvif
->vdev_id
, ret
);
4941 goto err_vdev_delete
;
4944 arvif
->def_wep_key_idx
= -1;
4946 vdev_param
= ar
->wmi
.vdev_param
->tx_encap_type
;
4947 ret
= ath10k_wmi_vdev_set_param(ar
, arvif
->vdev_id
, vdev_param
,
4948 ATH10K_HW_TXRX_NATIVE_WIFI
);
4949 /* 10.X firmware does not support this VDEV parameter. Do not warn */
4950 if (ret
&& ret
!= -EOPNOTSUPP
) {
4951 ath10k_warn(ar
, "failed to set vdev %i TX encapsulation: %d\n",
4952 arvif
->vdev_id
, ret
);
4953 goto err_vdev_delete
;
4956 /* Configuring number of spatial stream for monitor interface is causing
4957 * target assert in qca9888 and qca6174.
4959 if (ar
->cfg_tx_chainmask
&& (vif
->type
!= NL80211_IFTYPE_MONITOR
)) {
4960 u16 nss
= get_nss_from_chainmask(ar
->cfg_tx_chainmask
);
4962 vdev_param
= ar
->wmi
.vdev_param
->nss
;
4963 ret
= ath10k_wmi_vdev_set_param(ar
, arvif
->vdev_id
, vdev_param
,
4966 ath10k_warn(ar
, "failed to set vdev %i chainmask 0x%x, nss %i: %d\n",
4967 arvif
->vdev_id
, ar
->cfg_tx_chainmask
, nss
,
4969 goto err_vdev_delete
;
4973 if (arvif
->vdev_type
== WMI_VDEV_TYPE_AP
||
4974 arvif
->vdev_type
== WMI_VDEV_TYPE_IBSS
) {
4975 ret
= ath10k_peer_create(ar
, vif
, NULL
, arvif
->vdev_id
,
4976 vif
->addr
, WMI_PEER_TYPE_DEFAULT
);
4978 ath10k_warn(ar
, "failed to create vdev %i peer for AP/IBSS: %d\n",
4979 arvif
->vdev_id
, ret
);
4980 goto err_vdev_delete
;
4983 spin_lock_bh(&ar
->data_lock
);
4985 peer
= ath10k_peer_find(ar
, arvif
->vdev_id
, vif
->addr
);
4987 ath10k_warn(ar
, "failed to lookup peer %pM on vdev %i\n",
4988 vif
->addr
, arvif
->vdev_id
);
4989 spin_unlock_bh(&ar
->data_lock
);
4991 goto err_peer_delete
;
4994 arvif
->peer_id
= find_first_bit(peer
->peer_ids
,
4995 ATH10K_MAX_NUM_PEER_IDS
);
4997 spin_unlock_bh(&ar
->data_lock
);
4999 arvif
->peer_id
= HTT_INVALID_PEERID
;
5002 if (arvif
->vdev_type
== WMI_VDEV_TYPE_AP
) {
5003 ret
= ath10k_mac_set_kickout(arvif
);
5005 ath10k_warn(ar
, "failed to set vdev %i kickout parameters: %d\n",
5006 arvif
->vdev_id
, ret
);
5007 goto err_peer_delete
;
5011 if (arvif
->vdev_type
== WMI_VDEV_TYPE_STA
) {
5012 param
= WMI_STA_PS_PARAM_RX_WAKE_POLICY
;
5013 value
= WMI_STA_PS_RX_WAKE_POLICY_WAKE
;
5014 ret
= ath10k_wmi_set_sta_ps_param(ar
, arvif
->vdev_id
,
5017 ath10k_warn(ar
, "failed to set vdev %i RX wake policy: %d\n",
5018 arvif
->vdev_id
, ret
);
5019 goto err_peer_delete
;
5022 ret
= ath10k_mac_vif_recalc_ps_wake_threshold(arvif
);
5024 ath10k_warn(ar
, "failed to recalc ps wake threshold on vdev %i: %d\n",
5025 arvif
->vdev_id
, ret
);
5026 goto err_peer_delete
;
5029 ret
= ath10k_mac_vif_recalc_ps_poll_count(arvif
);
5031 ath10k_warn(ar
, "failed to recalc ps poll count on vdev %i: %d\n",
5032 arvif
->vdev_id
, ret
);
5033 goto err_peer_delete
;
5037 ret
= ath10k_mac_set_txbf_conf(arvif
);
5039 ath10k_warn(ar
, "failed to set txbf for vdev %d: %d\n",
5040 arvif
->vdev_id
, ret
);
5041 goto err_peer_delete
;
5044 ret
= ath10k_mac_set_rts(arvif
, ar
->hw
->wiphy
->rts_threshold
);
5046 ath10k_warn(ar
, "failed to set rts threshold for vdev %d: %d\n",
5047 arvif
->vdev_id
, ret
);
5048 goto err_peer_delete
;
5051 arvif
->txpower
= vif
->bss_conf
.txpower
;
5052 ret
= ath10k_mac_txpower_recalc(ar
);
5054 ath10k_warn(ar
, "failed to recalc tx power: %d\n", ret
);
5055 goto err_peer_delete
;
5058 if (vif
->type
== NL80211_IFTYPE_MONITOR
) {
5059 ar
->monitor_arvif
= arvif
;
5060 ret
= ath10k_monitor_recalc(ar
);
5062 ath10k_warn(ar
, "failed to recalc monitor: %d\n", ret
);
5063 goto err_peer_delete
;
5067 spin_lock_bh(&ar
->htt
.tx_lock
);
5069 ieee80211_wake_queue(ar
->hw
, arvif
->vdev_id
);
5070 spin_unlock_bh(&ar
->htt
.tx_lock
);
5072 mutex_unlock(&ar
->conf_mutex
);
5076 if (arvif
->vdev_type
== WMI_VDEV_TYPE_AP
||
5077 arvif
->vdev_type
== WMI_VDEV_TYPE_IBSS
)
5078 ath10k_wmi_peer_delete(ar
, arvif
->vdev_id
, vif
->addr
);
5081 ath10k_wmi_vdev_delete(ar
, arvif
->vdev_id
);
5082 ar
->free_vdev_map
|= 1LL << arvif
->vdev_id
;
5083 list_del(&arvif
->list
);
5086 if (arvif
->beacon_buf
) {
5087 dma_free_coherent(ar
->dev
, IEEE80211_MAX_FRAME_LEN
,
5088 arvif
->beacon_buf
, arvif
->beacon_paddr
);
5089 arvif
->beacon_buf
= NULL
;
5092 mutex_unlock(&ar
->conf_mutex
);
5097 static void ath10k_mac_vif_tx_unlock_all(struct ath10k_vif
*arvif
)
5101 for (i
= 0; i
< BITS_PER_LONG
; i
++)
5102 ath10k_mac_vif_tx_unlock(arvif
, i
);
5105 static void ath10k_remove_interface(struct ieee80211_hw
*hw
,
5106 struct ieee80211_vif
*vif
)
5108 struct ath10k
*ar
= hw
->priv
;
5109 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
5110 struct ath10k_peer
*peer
;
5114 cancel_work_sync(&arvif
->ap_csa_work
);
5115 cancel_delayed_work_sync(&arvif
->connection_loss_work
);
5117 mutex_lock(&ar
->conf_mutex
);
5119 spin_lock_bh(&ar
->data_lock
);
5120 ath10k_mac_vif_beacon_cleanup(arvif
);
5121 spin_unlock_bh(&ar
->data_lock
);
5123 ret
= ath10k_spectral_vif_stop(arvif
);
5125 ath10k_warn(ar
, "failed to stop spectral for vdev %i: %d\n",
5126 arvif
->vdev_id
, ret
);
5128 ar
->free_vdev_map
|= 1LL << arvif
->vdev_id
;
5129 list_del(&arvif
->list
);
5131 if (arvif
->vdev_type
== WMI_VDEV_TYPE_AP
||
5132 arvif
->vdev_type
== WMI_VDEV_TYPE_IBSS
) {
5133 ret
= ath10k_wmi_peer_delete(arvif
->ar
, arvif
->vdev_id
,
5136 ath10k_warn(ar
, "failed to submit AP/IBSS self-peer removal on vdev %i: %d\n",
5137 arvif
->vdev_id
, ret
);
5139 kfree(arvif
->u
.ap
.noa_data
);
5142 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac vdev %i delete (remove interface)\n",
5145 ret
= ath10k_wmi_vdev_delete(ar
, arvif
->vdev_id
);
5147 ath10k_warn(ar
, "failed to delete WMI vdev %i: %d\n",
5148 arvif
->vdev_id
, ret
);
5150 /* Some firmware revisions don't notify host about self-peer removal
5151 * until after associated vdev is deleted.
5153 if (arvif
->vdev_type
== WMI_VDEV_TYPE_AP
||
5154 arvif
->vdev_type
== WMI_VDEV_TYPE_IBSS
) {
5155 ret
= ath10k_wait_for_peer_deleted(ar
, arvif
->vdev_id
,
5158 ath10k_warn(ar
, "failed to remove AP self-peer on vdev %i: %d\n",
5159 arvif
->vdev_id
, ret
);
5161 spin_lock_bh(&ar
->data_lock
);
5163 spin_unlock_bh(&ar
->data_lock
);
5166 spin_lock_bh(&ar
->data_lock
);
5167 for (i
= 0; i
< ARRAY_SIZE(ar
->peer_map
); i
++) {
5168 peer
= ar
->peer_map
[i
];
5172 if (peer
->vif
== vif
) {
5173 ath10k_warn(ar
, "found vif peer %pM entry on vdev %i after it was supposedly removed\n",
5174 vif
->addr
, arvif
->vdev_id
);
5178 spin_unlock_bh(&ar
->data_lock
);
5180 ath10k_peer_cleanup(ar
, arvif
->vdev_id
);
5181 ath10k_mac_txq_unref(ar
, vif
->txq
);
5183 if (vif
->type
== NL80211_IFTYPE_MONITOR
) {
5184 ar
->monitor_arvif
= NULL
;
5185 ret
= ath10k_monitor_recalc(ar
);
5187 ath10k_warn(ar
, "failed to recalc monitor: %d\n", ret
);
5190 spin_lock_bh(&ar
->htt
.tx_lock
);
5191 ath10k_mac_vif_tx_unlock_all(arvif
);
5192 spin_unlock_bh(&ar
->htt
.tx_lock
);
5194 ath10k_mac_txq_unref(ar
, vif
->txq
);
5196 mutex_unlock(&ar
->conf_mutex
);
5200 * FIXME: Has to be verified.
5202 #define SUPPORTED_FILTERS \
5207 FIF_BCN_PRBRESP_PROMISC | \
5211 static void ath10k_configure_filter(struct ieee80211_hw
*hw
,
5212 unsigned int changed_flags
,
5213 unsigned int *total_flags
,
5216 struct ath10k
*ar
= hw
->priv
;
5219 mutex_lock(&ar
->conf_mutex
);
5221 changed_flags
&= SUPPORTED_FILTERS
;
5222 *total_flags
&= SUPPORTED_FILTERS
;
5223 ar
->filter_flags
= *total_flags
;
5225 ret
= ath10k_monitor_recalc(ar
);
5227 ath10k_warn(ar
, "failed to recalc montior: %d\n", ret
);
5229 mutex_unlock(&ar
->conf_mutex
);
5232 static void ath10k_bss_info_changed(struct ieee80211_hw
*hw
,
5233 struct ieee80211_vif
*vif
,
5234 struct ieee80211_bss_conf
*info
,
5237 struct ath10k
*ar
= hw
->priv
;
5238 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
5240 u32 vdev_param
, pdev_param
, slottime
, preamble
;
5242 mutex_lock(&ar
->conf_mutex
);
5244 if (changed
& BSS_CHANGED_IBSS
)
5245 ath10k_control_ibss(arvif
, info
, vif
->addr
);
5247 if (changed
& BSS_CHANGED_BEACON_INT
) {
5248 arvif
->beacon_interval
= info
->beacon_int
;
5249 vdev_param
= ar
->wmi
.vdev_param
->beacon_interval
;
5250 ret
= ath10k_wmi_vdev_set_param(ar
, arvif
->vdev_id
, vdev_param
,
5251 arvif
->beacon_interval
);
5252 ath10k_dbg(ar
, ATH10K_DBG_MAC
,
5253 "mac vdev %d beacon_interval %d\n",
5254 arvif
->vdev_id
, arvif
->beacon_interval
);
5257 ath10k_warn(ar
, "failed to set beacon interval for vdev %d: %i\n",
5258 arvif
->vdev_id
, ret
);
5261 if (changed
& BSS_CHANGED_BEACON
) {
5262 ath10k_dbg(ar
, ATH10K_DBG_MAC
,
5263 "vdev %d set beacon tx mode to staggered\n",
5266 pdev_param
= ar
->wmi
.pdev_param
->beacon_tx_mode
;
5267 ret
= ath10k_wmi_pdev_set_param(ar
, pdev_param
,
5268 WMI_BEACON_STAGGERED_MODE
);
5270 ath10k_warn(ar
, "failed to set beacon mode for vdev %d: %i\n",
5271 arvif
->vdev_id
, ret
);
5273 ret
= ath10k_mac_setup_bcn_tmpl(arvif
);
5275 ath10k_warn(ar
, "failed to update beacon template: %d\n",
5278 if (ieee80211_vif_is_mesh(vif
)) {
5279 /* mesh doesn't use SSID but firmware needs it */
5280 strncpy(arvif
->u
.ap
.ssid
, "mesh",
5281 sizeof(arvif
->u
.ap
.ssid
));
5282 arvif
->u
.ap
.ssid_len
= 4;
5286 if (changed
& BSS_CHANGED_AP_PROBE_RESP
) {
5287 ret
= ath10k_mac_setup_prb_tmpl(arvif
);
5289 ath10k_warn(ar
, "failed to setup probe resp template on vdev %i: %d\n",
5290 arvif
->vdev_id
, ret
);
5293 if (changed
& (BSS_CHANGED_BEACON_INFO
| BSS_CHANGED_BEACON
)) {
5294 arvif
->dtim_period
= info
->dtim_period
;
5296 ath10k_dbg(ar
, ATH10K_DBG_MAC
,
5297 "mac vdev %d dtim_period %d\n",
5298 arvif
->vdev_id
, arvif
->dtim_period
);
5300 vdev_param
= ar
->wmi
.vdev_param
->dtim_period
;
5301 ret
= ath10k_wmi_vdev_set_param(ar
, arvif
->vdev_id
, vdev_param
,
5302 arvif
->dtim_period
);
5304 ath10k_warn(ar
, "failed to set dtim period for vdev %d: %i\n",
5305 arvif
->vdev_id
, ret
);
5308 if (changed
& BSS_CHANGED_SSID
&&
5309 vif
->type
== NL80211_IFTYPE_AP
) {
5310 arvif
->u
.ap
.ssid_len
= info
->ssid_len
;
5312 memcpy(arvif
->u
.ap
.ssid
, info
->ssid
, info
->ssid_len
);
5313 arvif
->u
.ap
.hidden_ssid
= info
->hidden_ssid
;
5316 if (changed
& BSS_CHANGED_BSSID
&& !is_zero_ether_addr(info
->bssid
))
5317 ether_addr_copy(arvif
->bssid
, info
->bssid
);
5319 if (changed
& BSS_CHANGED_BEACON_ENABLED
)
5320 ath10k_control_beaconing(arvif
, info
);
5322 if (changed
& BSS_CHANGED_ERP_CTS_PROT
) {
5323 arvif
->use_cts_prot
= info
->use_cts_prot
;
5324 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac vdev %d cts_prot %d\n",
5325 arvif
->vdev_id
, info
->use_cts_prot
);
5327 ret
= ath10k_recalc_rtscts_prot(arvif
);
5329 ath10k_warn(ar
, "failed to recalculate rts/cts prot for vdev %d: %d\n",
5330 arvif
->vdev_id
, ret
);
5332 vdev_param
= ar
->wmi
.vdev_param
->protection_mode
;
5333 ret
= ath10k_wmi_vdev_set_param(ar
, arvif
->vdev_id
, vdev_param
,
5334 info
->use_cts_prot
? 1 : 0);
5336 ath10k_warn(ar
, "failed to set protection mode %d on vdev %i: %d\n",
5337 info
->use_cts_prot
, arvif
->vdev_id
, ret
);
5340 if (changed
& BSS_CHANGED_ERP_SLOT
) {
5341 if (info
->use_short_slot
)
5342 slottime
= WMI_VDEV_SLOT_TIME_SHORT
; /* 9us */
5345 slottime
= WMI_VDEV_SLOT_TIME_LONG
; /* 20us */
5347 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac vdev %d slot_time %d\n",
5348 arvif
->vdev_id
, slottime
);
5350 vdev_param
= ar
->wmi
.vdev_param
->slot_time
;
5351 ret
= ath10k_wmi_vdev_set_param(ar
, arvif
->vdev_id
, vdev_param
,
5354 ath10k_warn(ar
, "failed to set erp slot for vdev %d: %i\n",
5355 arvif
->vdev_id
, ret
);
5358 if (changed
& BSS_CHANGED_ERP_PREAMBLE
) {
5359 if (info
->use_short_preamble
)
5360 preamble
= WMI_VDEV_PREAMBLE_SHORT
;
5362 preamble
= WMI_VDEV_PREAMBLE_LONG
;
5364 ath10k_dbg(ar
, ATH10K_DBG_MAC
,
5365 "mac vdev %d preamble %dn",
5366 arvif
->vdev_id
, preamble
);
5368 vdev_param
= ar
->wmi
.vdev_param
->preamble
;
5369 ret
= ath10k_wmi_vdev_set_param(ar
, arvif
->vdev_id
, vdev_param
,
5372 ath10k_warn(ar
, "failed to set preamble for vdev %d: %i\n",
5373 arvif
->vdev_id
, ret
);
5376 if (changed
& BSS_CHANGED_ASSOC
) {
5378 /* Workaround: Make sure monitor vdev is not running
5379 * when associating to prevent some firmware revisions
5380 * (e.g. 10.1 and 10.2) from crashing.
5382 if (ar
->monitor_started
)
5383 ath10k_monitor_stop(ar
);
5384 ath10k_bss_assoc(hw
, vif
, info
);
5385 ath10k_monitor_recalc(ar
);
5387 ath10k_bss_disassoc(hw
, vif
);
5391 if (changed
& BSS_CHANGED_TXPOWER
) {
5392 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac vdev_id %i txpower %d\n",
5393 arvif
->vdev_id
, info
->txpower
);
5395 arvif
->txpower
= info
->txpower
;
5396 ret
= ath10k_mac_txpower_recalc(ar
);
5398 ath10k_warn(ar
, "failed to recalc tx power: %d\n", ret
);
5401 if (changed
& BSS_CHANGED_PS
) {
5402 arvif
->ps
= vif
->bss_conf
.ps
;
5404 ret
= ath10k_config_ps(ar
);
5406 ath10k_warn(ar
, "failed to setup ps on vdev %i: %d\n",
5407 arvif
->vdev_id
, ret
);
5410 mutex_unlock(&ar
->conf_mutex
);
5413 static int ath10k_hw_scan(struct ieee80211_hw
*hw
,
5414 struct ieee80211_vif
*vif
,
5415 struct ieee80211_scan_request
*hw_req
)
5417 struct ath10k
*ar
= hw
->priv
;
5418 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
5419 struct cfg80211_scan_request
*req
= &hw_req
->req
;
5420 struct wmi_start_scan_arg arg
;
5424 mutex_lock(&ar
->conf_mutex
);
5426 spin_lock_bh(&ar
->data_lock
);
5427 switch (ar
->scan
.state
) {
5428 case ATH10K_SCAN_IDLE
:
5429 reinit_completion(&ar
->scan
.started
);
5430 reinit_completion(&ar
->scan
.completed
);
5431 ar
->scan
.state
= ATH10K_SCAN_STARTING
;
5432 ar
->scan
.is_roc
= false;
5433 ar
->scan
.vdev_id
= arvif
->vdev_id
;
5436 case ATH10K_SCAN_STARTING
:
5437 case ATH10K_SCAN_RUNNING
:
5438 case ATH10K_SCAN_ABORTING
:
5442 spin_unlock_bh(&ar
->data_lock
);
5447 memset(&arg
, 0, sizeof(arg
));
5448 ath10k_wmi_start_scan_init(ar
, &arg
);
5449 arg
.vdev_id
= arvif
->vdev_id
;
5450 arg
.scan_id
= ATH10K_SCAN_ID
;
5453 arg
.ie_len
= req
->ie_len
;
5454 memcpy(arg
.ie
, req
->ie
, arg
.ie_len
);
5458 arg
.n_ssids
= req
->n_ssids
;
5459 for (i
= 0; i
< arg
.n_ssids
; i
++) {
5460 arg
.ssids
[i
].len
= req
->ssids
[i
].ssid_len
;
5461 arg
.ssids
[i
].ssid
= req
->ssids
[i
].ssid
;
5464 arg
.scan_ctrl_flags
|= WMI_SCAN_FLAG_PASSIVE
;
5467 if (req
->n_channels
) {
5468 arg
.n_channels
= req
->n_channels
;
5469 for (i
= 0; i
< arg
.n_channels
; i
++)
5470 arg
.channels
[i
] = req
->channels
[i
]->center_freq
;
5473 ret
= ath10k_start_scan(ar
, &arg
);
5475 ath10k_warn(ar
, "failed to start hw scan: %d\n", ret
);
5476 spin_lock_bh(&ar
->data_lock
);
5477 ar
->scan
.state
= ATH10K_SCAN_IDLE
;
5478 spin_unlock_bh(&ar
->data_lock
);
5481 /* Add a 200ms margin to account for event/command processing */
5482 ieee80211_queue_delayed_work(ar
->hw
, &ar
->scan
.timeout
,
5483 msecs_to_jiffies(arg
.max_scan_time
+
5487 mutex_unlock(&ar
->conf_mutex
);
5491 static void ath10k_cancel_hw_scan(struct ieee80211_hw
*hw
,
5492 struct ieee80211_vif
*vif
)
5494 struct ath10k
*ar
= hw
->priv
;
5496 mutex_lock(&ar
->conf_mutex
);
5497 ath10k_scan_abort(ar
);
5498 mutex_unlock(&ar
->conf_mutex
);
5500 cancel_delayed_work_sync(&ar
->scan
.timeout
);
5503 static void ath10k_set_key_h_def_keyidx(struct ath10k
*ar
,
5504 struct ath10k_vif
*arvif
,
5505 enum set_key_cmd cmd
,
5506 struct ieee80211_key_conf
*key
)
5508 u32 vdev_param
= arvif
->ar
->wmi
.vdev_param
->def_keyid
;
5511 /* 10.1 firmware branch requires default key index to be set to group
5512 * key index after installing it. Otherwise FW/HW Txes corrupted
5513 * frames with multi-vif APs. This is not required for main firmware
5514 * branch (e.g. 636).
5516 * This is also needed for 636 fw for IBSS-RSN to work more reliably.
5518 * FIXME: It remains unknown if this is required for multi-vif STA
5519 * interfaces on 10.1.
5522 if (arvif
->vdev_type
!= WMI_VDEV_TYPE_AP
&&
5523 arvif
->vdev_type
!= WMI_VDEV_TYPE_IBSS
)
5526 if (key
->cipher
== WLAN_CIPHER_SUITE_WEP40
)
5529 if (key
->cipher
== WLAN_CIPHER_SUITE_WEP104
)
5532 if (key
->flags
& IEEE80211_KEY_FLAG_PAIRWISE
)
5538 ret
= ath10k_wmi_vdev_set_param(ar
, arvif
->vdev_id
, vdev_param
,
5541 ath10k_warn(ar
, "failed to set vdev %i group key as default key: %d\n",
5542 arvif
->vdev_id
, ret
);
5545 static int ath10k_set_key(struct ieee80211_hw
*hw
, enum set_key_cmd cmd
,
5546 struct ieee80211_vif
*vif
, struct ieee80211_sta
*sta
,
5547 struct ieee80211_key_conf
*key
)
5549 struct ath10k
*ar
= hw
->priv
;
5550 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
5551 struct ath10k_peer
*peer
;
5552 const u8
*peer_addr
;
5553 bool is_wep
= key
->cipher
== WLAN_CIPHER_SUITE_WEP40
||
5554 key
->cipher
== WLAN_CIPHER_SUITE_WEP104
;
5560 /* this one needs to be done in software */
5561 if (key
->cipher
== WLAN_CIPHER_SUITE_AES_CMAC
)
5564 if (arvif
->nohwcrypt
)
5567 if (key
->keyidx
> WMI_MAX_KEY_INDEX
)
5570 mutex_lock(&ar
->conf_mutex
);
5573 peer_addr
= sta
->addr
;
5574 else if (arvif
->vdev_type
== WMI_VDEV_TYPE_STA
)
5575 peer_addr
= vif
->bss_conf
.bssid
;
5577 peer_addr
= vif
->addr
;
5579 key
->hw_key_idx
= key
->keyidx
;
5583 arvif
->wep_keys
[key
->keyidx
] = key
;
5585 arvif
->wep_keys
[key
->keyidx
] = NULL
;
5588 /* the peer should not disappear in mid-way (unless FW goes awry) since
5589 * we already hold conf_mutex. we just make sure its there now. */
5590 spin_lock_bh(&ar
->data_lock
);
5591 peer
= ath10k_peer_find(ar
, arvif
->vdev_id
, peer_addr
);
5592 spin_unlock_bh(&ar
->data_lock
);
5595 if (cmd
== SET_KEY
) {
5596 ath10k_warn(ar
, "failed to install key for non-existent peer %pM\n",
5601 /* if the peer doesn't exist there is no key to disable
5607 if (key
->flags
& IEEE80211_KEY_FLAG_PAIRWISE
)
5608 flags
|= WMI_KEY_PAIRWISE
;
5610 flags
|= WMI_KEY_GROUP
;
5613 if (cmd
== DISABLE_KEY
)
5614 ath10k_clear_vdev_key(arvif
, key
);
5616 /* When WEP keys are uploaded it's possible that there are
5617 * stations associated already (e.g. when merging) without any
5618 * keys. Static WEP needs an explicit per-peer key upload.
5620 if (vif
->type
== NL80211_IFTYPE_ADHOC
&&
5622 ath10k_mac_vif_update_wep_key(arvif
, key
);
5624 /* 802.1x never sets the def_wep_key_idx so each set_key()
5625 * call changes default tx key.
5627 * Static WEP sets def_wep_key_idx via .set_default_unicast_key
5628 * after first set_key().
5630 if (cmd
== SET_KEY
&& arvif
->def_wep_key_idx
== -1)
5631 flags
|= WMI_KEY_TX_USAGE
;
5634 ret
= ath10k_install_key(arvif
, key
, cmd
, peer_addr
, flags
);
5637 ath10k_warn(ar
, "failed to install key for vdev %i peer %pM: %d\n",
5638 arvif
->vdev_id
, peer_addr
, ret
);
5642 /* mac80211 sets static WEP keys as groupwise while firmware requires
5643 * them to be installed twice as both pairwise and groupwise.
5645 if (is_wep
&& !sta
&& vif
->type
== NL80211_IFTYPE_STATION
) {
5647 flags2
&= ~WMI_KEY_GROUP
;
5648 flags2
|= WMI_KEY_PAIRWISE
;
5650 ret
= ath10k_install_key(arvif
, key
, cmd
, peer_addr
, flags2
);
5653 ath10k_warn(ar
, "failed to install (ucast) key for vdev %i peer %pM: %d\n",
5654 arvif
->vdev_id
, peer_addr
, ret
);
5655 ret2
= ath10k_install_key(arvif
, key
, DISABLE_KEY
,
5659 ath10k_warn(ar
, "failed to disable (mcast) key for vdev %i peer %pM: %d\n",
5660 arvif
->vdev_id
, peer_addr
, ret2
);
5666 ath10k_set_key_h_def_keyidx(ar
, arvif
, cmd
, key
);
5668 spin_lock_bh(&ar
->data_lock
);
5669 peer
= ath10k_peer_find(ar
, arvif
->vdev_id
, peer_addr
);
5670 if (peer
&& cmd
== SET_KEY
)
5671 peer
->keys
[key
->keyidx
] = key
;
5672 else if (peer
&& cmd
== DISABLE_KEY
)
5673 peer
->keys
[key
->keyidx
] = NULL
;
5674 else if (peer
== NULL
)
5675 /* impossible unless FW goes crazy */
5676 ath10k_warn(ar
, "Peer %pM disappeared!\n", peer_addr
);
5677 spin_unlock_bh(&ar
->data_lock
);
5680 mutex_unlock(&ar
->conf_mutex
);
5684 static void ath10k_set_default_unicast_key(struct ieee80211_hw
*hw
,
5685 struct ieee80211_vif
*vif
,
5688 struct ath10k
*ar
= hw
->priv
;
5689 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
5692 mutex_lock(&arvif
->ar
->conf_mutex
);
5694 if (arvif
->ar
->state
!= ATH10K_STATE_ON
)
5697 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac vdev %d set keyidx %d\n",
5698 arvif
->vdev_id
, keyidx
);
5700 ret
= ath10k_wmi_vdev_set_param(arvif
->ar
,
5702 arvif
->ar
->wmi
.vdev_param
->def_keyid
,
5706 ath10k_warn(ar
, "failed to update wep key index for vdev %d: %d\n",
5712 arvif
->def_wep_key_idx
= keyidx
;
5715 mutex_unlock(&arvif
->ar
->conf_mutex
);
5718 static void ath10k_sta_rc_update_wk(struct work_struct
*wk
)
5721 struct ath10k_vif
*arvif
;
5722 struct ath10k_sta
*arsta
;
5723 struct ieee80211_sta
*sta
;
5724 struct cfg80211_chan_def def
;
5725 enum nl80211_band band
;
5726 const u8
*ht_mcs_mask
;
5727 const u16
*vht_mcs_mask
;
5728 u32 changed
, bw
, nss
, smps
;
5731 arsta
= container_of(wk
, struct ath10k_sta
, update_wk
);
5732 sta
= container_of((void *)arsta
, struct ieee80211_sta
, drv_priv
);
5733 arvif
= arsta
->arvif
;
5736 if (WARN_ON(ath10k_mac_vif_chan(arvif
->vif
, &def
)))
5739 band
= def
.chan
->band
;
5740 ht_mcs_mask
= arvif
->bitrate_mask
.control
[band
].ht_mcs
;
5741 vht_mcs_mask
= arvif
->bitrate_mask
.control
[band
].vht_mcs
;
5743 spin_lock_bh(&ar
->data_lock
);
5745 changed
= arsta
->changed
;
5752 spin_unlock_bh(&ar
->data_lock
);
5754 mutex_lock(&ar
->conf_mutex
);
5756 nss
= max_t(u32
, 1, nss
);
5757 nss
= min(nss
, max(ath10k_mac_max_ht_nss(ht_mcs_mask
),
5758 ath10k_mac_max_vht_nss(vht_mcs_mask
)));
5760 if (changed
& IEEE80211_RC_BW_CHANGED
) {
5761 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac update sta %pM peer bw %d\n",
5764 err
= ath10k_wmi_peer_set_param(ar
, arvif
->vdev_id
, sta
->addr
,
5765 WMI_PEER_CHAN_WIDTH
, bw
);
5767 ath10k_warn(ar
, "failed to update STA %pM peer bw %d: %d\n",
5768 sta
->addr
, bw
, err
);
5771 if (changed
& IEEE80211_RC_NSS_CHANGED
) {
5772 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac update sta %pM nss %d\n",
5775 err
= ath10k_wmi_peer_set_param(ar
, arvif
->vdev_id
, sta
->addr
,
5778 ath10k_warn(ar
, "failed to update STA %pM nss %d: %d\n",
5779 sta
->addr
, nss
, err
);
5782 if (changed
& IEEE80211_RC_SMPS_CHANGED
) {
5783 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac update sta %pM smps %d\n",
5786 err
= ath10k_wmi_peer_set_param(ar
, arvif
->vdev_id
, sta
->addr
,
5787 WMI_PEER_SMPS_STATE
, smps
);
5789 ath10k_warn(ar
, "failed to update STA %pM smps %d: %d\n",
5790 sta
->addr
, smps
, err
);
5793 if (changed
& IEEE80211_RC_SUPP_RATES_CHANGED
||
5794 changed
& IEEE80211_RC_NSS_CHANGED
) {
5795 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac update sta %pM supp rates/nss\n",
5798 err
= ath10k_station_assoc(ar
, arvif
->vif
, sta
, true);
5800 ath10k_warn(ar
, "failed to reassociate station: %pM\n",
5804 mutex_unlock(&ar
->conf_mutex
);
5807 static int ath10k_mac_inc_num_stations(struct ath10k_vif
*arvif
,
5808 struct ieee80211_sta
*sta
)
5810 struct ath10k
*ar
= arvif
->ar
;
5812 lockdep_assert_held(&ar
->conf_mutex
);
5814 if (arvif
->vdev_type
== WMI_VDEV_TYPE_STA
&& !sta
->tdls
)
5817 if (ar
->num_stations
>= ar
->max_num_stations
)
5825 static void ath10k_mac_dec_num_stations(struct ath10k_vif
*arvif
,
5826 struct ieee80211_sta
*sta
)
5828 struct ath10k
*ar
= arvif
->ar
;
5830 lockdep_assert_held(&ar
->conf_mutex
);
5832 if (arvif
->vdev_type
== WMI_VDEV_TYPE_STA
&& !sta
->tdls
)
5838 struct ath10k_mac_tdls_iter_data
{
5839 u32 num_tdls_stations
;
5840 struct ieee80211_vif
*curr_vif
;
5843 static void ath10k_mac_tdls_vif_stations_count_iter(void *data
,
5844 struct ieee80211_sta
*sta
)
5846 struct ath10k_mac_tdls_iter_data
*iter_data
= data
;
5847 struct ath10k_sta
*arsta
= (struct ath10k_sta
*)sta
->drv_priv
;
5848 struct ieee80211_vif
*sta_vif
= arsta
->arvif
->vif
;
5850 if (sta
->tdls
&& sta_vif
== iter_data
->curr_vif
)
5851 iter_data
->num_tdls_stations
++;
5854 static int ath10k_mac_tdls_vif_stations_count(struct ieee80211_hw
*hw
,
5855 struct ieee80211_vif
*vif
)
5857 struct ath10k_mac_tdls_iter_data data
= {};
5859 data
.curr_vif
= vif
;
5861 ieee80211_iterate_stations_atomic(hw
,
5862 ath10k_mac_tdls_vif_stations_count_iter
,
5864 return data
.num_tdls_stations
;
5867 static void ath10k_mac_tdls_vifs_count_iter(void *data
, u8
*mac
,
5868 struct ieee80211_vif
*vif
)
5870 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
5871 int *num_tdls_vifs
= data
;
5873 if (vif
->type
!= NL80211_IFTYPE_STATION
)
5876 if (ath10k_mac_tdls_vif_stations_count(arvif
->ar
->hw
, vif
) > 0)
5880 static int ath10k_mac_tdls_vifs_count(struct ieee80211_hw
*hw
)
5882 int num_tdls_vifs
= 0;
5884 ieee80211_iterate_active_interfaces_atomic(hw
,
5885 IEEE80211_IFACE_ITER_NORMAL
,
5886 ath10k_mac_tdls_vifs_count_iter
,
5888 return num_tdls_vifs
;
5891 static int ath10k_sta_state(struct ieee80211_hw
*hw
,
5892 struct ieee80211_vif
*vif
,
5893 struct ieee80211_sta
*sta
,
5894 enum ieee80211_sta_state old_state
,
5895 enum ieee80211_sta_state new_state
)
5897 struct ath10k
*ar
= hw
->priv
;
5898 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
5899 struct ath10k_sta
*arsta
= (struct ath10k_sta
*)sta
->drv_priv
;
5900 struct ath10k_peer
*peer
;
5904 if (old_state
== IEEE80211_STA_NOTEXIST
&&
5905 new_state
== IEEE80211_STA_NONE
) {
5906 memset(arsta
, 0, sizeof(*arsta
));
5907 arsta
->arvif
= arvif
;
5908 INIT_WORK(&arsta
->update_wk
, ath10k_sta_rc_update_wk
);
5910 for (i
= 0; i
< ARRAY_SIZE(sta
->txq
); i
++)
5911 ath10k_mac_txq_init(sta
->txq
[i
]);
5914 /* cancel must be done outside the mutex to avoid deadlock */
5915 if ((old_state
== IEEE80211_STA_NONE
&&
5916 new_state
== IEEE80211_STA_NOTEXIST
))
5917 cancel_work_sync(&arsta
->update_wk
);
5919 mutex_lock(&ar
->conf_mutex
);
5921 if (old_state
== IEEE80211_STA_NOTEXIST
&&
5922 new_state
== IEEE80211_STA_NONE
) {
5924 * New station addition.
5926 enum wmi_peer_type peer_type
= WMI_PEER_TYPE_DEFAULT
;
5927 u32 num_tdls_stations
;
5930 ath10k_dbg(ar
, ATH10K_DBG_MAC
,
5931 "mac vdev %d peer create %pM (new sta) sta %d / %d peer %d / %d\n",
5932 arvif
->vdev_id
, sta
->addr
,
5933 ar
->num_stations
+ 1, ar
->max_num_stations
,
5934 ar
->num_peers
+ 1, ar
->max_num_peers
);
5936 ret
= ath10k_mac_inc_num_stations(arvif
, sta
);
5938 ath10k_warn(ar
, "refusing to associate station: too many connected already (%d)\n",
5939 ar
->max_num_stations
);
5944 peer_type
= WMI_PEER_TYPE_TDLS
;
5946 ret
= ath10k_peer_create(ar
, vif
, sta
, arvif
->vdev_id
,
5947 sta
->addr
, peer_type
);
5949 ath10k_warn(ar
, "failed to add peer %pM for vdev %d when adding a new sta: %i\n",
5950 sta
->addr
, arvif
->vdev_id
, ret
);
5951 ath10k_mac_dec_num_stations(arvif
, sta
);
5955 spin_lock_bh(&ar
->data_lock
);
5957 peer
= ath10k_peer_find(ar
, arvif
->vdev_id
, sta
->addr
);
5959 ath10k_warn(ar
, "failed to lookup peer %pM on vdev %i\n",
5960 vif
->addr
, arvif
->vdev_id
);
5961 spin_unlock_bh(&ar
->data_lock
);
5962 ath10k_peer_delete(ar
, arvif
->vdev_id
, sta
->addr
);
5963 ath10k_mac_dec_num_stations(arvif
, sta
);
5968 arsta
->peer_id
= find_first_bit(peer
->peer_ids
,
5969 ATH10K_MAX_NUM_PEER_IDS
);
5971 spin_unlock_bh(&ar
->data_lock
);
5976 num_tdls_stations
= ath10k_mac_tdls_vif_stations_count(hw
, vif
);
5977 num_tdls_vifs
= ath10k_mac_tdls_vifs_count(hw
);
5979 if (num_tdls_vifs
>= ar
->max_num_tdls_vdevs
&&
5980 num_tdls_stations
== 0) {
5981 ath10k_warn(ar
, "vdev %i exceeded maximum number of tdls vdevs %i\n",
5982 arvif
->vdev_id
, ar
->max_num_tdls_vdevs
);
5983 ath10k_peer_delete(ar
, arvif
->vdev_id
, sta
->addr
);
5984 ath10k_mac_dec_num_stations(arvif
, sta
);
5989 if (num_tdls_stations
== 0) {
5990 /* This is the first tdls peer in current vif */
5991 enum wmi_tdls_state state
= WMI_TDLS_ENABLE_ACTIVE
;
5993 ret
= ath10k_wmi_update_fw_tdls_state(ar
, arvif
->vdev_id
,
5996 ath10k_warn(ar
, "failed to update fw tdls state on vdev %i: %i\n",
5997 arvif
->vdev_id
, ret
);
5998 ath10k_peer_delete(ar
, arvif
->vdev_id
,
6000 ath10k_mac_dec_num_stations(arvif
, sta
);
6005 ret
= ath10k_mac_tdls_peer_update(ar
, arvif
->vdev_id
, sta
,
6006 WMI_TDLS_PEER_STATE_PEERING
);
6009 "failed to update tdls peer %pM for vdev %d when adding a new sta: %i\n",
6010 sta
->addr
, arvif
->vdev_id
, ret
);
6011 ath10k_peer_delete(ar
, arvif
->vdev_id
, sta
->addr
);
6012 ath10k_mac_dec_num_stations(arvif
, sta
);
6014 if (num_tdls_stations
!= 0)
6016 ath10k_wmi_update_fw_tdls_state(ar
, arvif
->vdev_id
,
6019 } else if ((old_state
== IEEE80211_STA_NONE
&&
6020 new_state
== IEEE80211_STA_NOTEXIST
)) {
6022 * Existing station deletion.
6024 ath10k_dbg(ar
, ATH10K_DBG_MAC
,
6025 "mac vdev %d peer delete %pM (sta gone)\n",
6026 arvif
->vdev_id
, sta
->addr
);
6028 ret
= ath10k_peer_delete(ar
, arvif
->vdev_id
, sta
->addr
);
6030 ath10k_warn(ar
, "failed to delete peer %pM for vdev %d: %i\n",
6031 sta
->addr
, arvif
->vdev_id
, ret
);
6033 ath10k_mac_dec_num_stations(arvif
, sta
);
6035 spin_lock_bh(&ar
->data_lock
);
6036 for (i
= 0; i
< ARRAY_SIZE(ar
->peer_map
); i
++) {
6037 peer
= ar
->peer_map
[i
];
6041 if (peer
->sta
== sta
) {
6042 ath10k_warn(ar
, "found sta peer %pM (ptr %pK id %d) entry on vdev %i after it was supposedly removed\n",
6043 sta
->addr
, peer
, i
, arvif
->vdev_id
);
6046 /* Clean up the peer object as well since we
6047 * must have failed to do this above.
6049 list_del(&peer
->list
);
6050 ar
->peer_map
[i
] = NULL
;
6055 spin_unlock_bh(&ar
->data_lock
);
6057 for (i
= 0; i
< ARRAY_SIZE(sta
->txq
); i
++)
6058 ath10k_mac_txq_unref(ar
, sta
->txq
[i
]);
6063 if (ath10k_mac_tdls_vif_stations_count(hw
, vif
))
6066 /* This was the last tdls peer in current vif */
6067 ret
= ath10k_wmi_update_fw_tdls_state(ar
, arvif
->vdev_id
,
6070 ath10k_warn(ar
, "failed to update fw tdls state on vdev %i: %i\n",
6071 arvif
->vdev_id
, ret
);
6073 } else if (old_state
== IEEE80211_STA_AUTH
&&
6074 new_state
== IEEE80211_STA_ASSOC
&&
6075 (vif
->type
== NL80211_IFTYPE_AP
||
6076 vif
->type
== NL80211_IFTYPE_MESH_POINT
||
6077 vif
->type
== NL80211_IFTYPE_ADHOC
)) {
6081 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac sta %pM associated\n",
6084 ret
= ath10k_station_assoc(ar
, vif
, sta
, false);
6086 ath10k_warn(ar
, "failed to associate station %pM for vdev %i: %i\n",
6087 sta
->addr
, arvif
->vdev_id
, ret
);
6088 } else if (old_state
== IEEE80211_STA_ASSOC
&&
6089 new_state
== IEEE80211_STA_AUTHORIZED
&&
6092 * Tdls station authorized.
6094 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac tdls sta %pM authorized\n",
6097 ret
= ath10k_station_assoc(ar
, vif
, sta
, false);
6099 ath10k_warn(ar
, "failed to associate tdls station %pM for vdev %i: %i\n",
6100 sta
->addr
, arvif
->vdev_id
, ret
);
6104 ret
= ath10k_mac_tdls_peer_update(ar
, arvif
->vdev_id
, sta
,
6105 WMI_TDLS_PEER_STATE_CONNECTED
);
6107 ath10k_warn(ar
, "failed to update tdls peer %pM for vdev %i: %i\n",
6108 sta
->addr
, arvif
->vdev_id
, ret
);
6109 } else if (old_state
== IEEE80211_STA_ASSOC
&&
6110 new_state
== IEEE80211_STA_AUTH
&&
6111 (vif
->type
== NL80211_IFTYPE_AP
||
6112 vif
->type
== NL80211_IFTYPE_MESH_POINT
||
6113 vif
->type
== NL80211_IFTYPE_ADHOC
)) {
6117 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac sta %pM disassociated\n",
6120 ret
= ath10k_station_disassoc(ar
, vif
, sta
);
6122 ath10k_warn(ar
, "failed to disassociate station: %pM vdev %i: %i\n",
6123 sta
->addr
, arvif
->vdev_id
, ret
);
6126 mutex_unlock(&ar
->conf_mutex
);
6130 static int ath10k_conf_tx_uapsd(struct ath10k
*ar
, struct ieee80211_vif
*vif
,
6131 u16 ac
, bool enable
)
6133 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
6134 struct wmi_sta_uapsd_auto_trig_arg arg
= {};
6135 u32 prio
= 0, acc
= 0;
6139 lockdep_assert_held(&ar
->conf_mutex
);
6141 if (arvif
->vdev_type
!= WMI_VDEV_TYPE_STA
)
6145 case IEEE80211_AC_VO
:
6146 value
= WMI_STA_PS_UAPSD_AC3_DELIVERY_EN
|
6147 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN
;
6151 case IEEE80211_AC_VI
:
6152 value
= WMI_STA_PS_UAPSD_AC2_DELIVERY_EN
|
6153 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN
;
6157 case IEEE80211_AC_BE
:
6158 value
= WMI_STA_PS_UAPSD_AC1_DELIVERY_EN
|
6159 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN
;
6163 case IEEE80211_AC_BK
:
6164 value
= WMI_STA_PS_UAPSD_AC0_DELIVERY_EN
|
6165 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN
;
6172 arvif
->u
.sta
.uapsd
|= value
;
6174 arvif
->u
.sta
.uapsd
&= ~value
;
6176 ret
= ath10k_wmi_set_sta_ps_param(ar
, arvif
->vdev_id
,
6177 WMI_STA_PS_PARAM_UAPSD
,
6178 arvif
->u
.sta
.uapsd
);
6180 ath10k_warn(ar
, "failed to set uapsd params: %d\n", ret
);
6184 if (arvif
->u
.sta
.uapsd
)
6185 value
= WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD
;
6187 value
= WMI_STA_PS_RX_WAKE_POLICY_WAKE
;
6189 ret
= ath10k_wmi_set_sta_ps_param(ar
, arvif
->vdev_id
,
6190 WMI_STA_PS_PARAM_RX_WAKE_POLICY
,
6193 ath10k_warn(ar
, "failed to set rx wake param: %d\n", ret
);
6195 ret
= ath10k_mac_vif_recalc_ps_wake_threshold(arvif
);
6197 ath10k_warn(ar
, "failed to recalc ps wake threshold on vdev %i: %d\n",
6198 arvif
->vdev_id
, ret
);
6202 ret
= ath10k_mac_vif_recalc_ps_poll_count(arvif
);
6204 ath10k_warn(ar
, "failed to recalc ps poll count on vdev %i: %d\n",
6205 arvif
->vdev_id
, ret
);
6209 if (test_bit(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG
, ar
->wmi
.svc_map
) ||
6210 test_bit(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG
, ar
->wmi
.svc_map
)) {
6211 /* Only userspace can make an educated decision when to send
6212 * trigger frame. The following effectively disables u-UAPSD
6213 * autotrigger in firmware (which is enabled by default
6214 * provided the autotrigger service is available).
6218 arg
.user_priority
= prio
;
6219 arg
.service_interval
= 0;
6220 arg
.suspend_interval
= WMI_STA_UAPSD_MAX_INTERVAL_MSEC
;
6221 arg
.delay_interval
= WMI_STA_UAPSD_MAX_INTERVAL_MSEC
;
6223 ret
= ath10k_wmi_vdev_sta_uapsd(ar
, arvif
->vdev_id
,
6224 arvif
->bssid
, &arg
, 1);
6226 ath10k_warn(ar
, "failed to set uapsd auto trigger %d\n",
6236 static int ath10k_conf_tx(struct ieee80211_hw
*hw
,
6237 struct ieee80211_vif
*vif
, u16 ac
,
6238 const struct ieee80211_tx_queue_params
*params
)
6240 struct ath10k
*ar
= hw
->priv
;
6241 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
6242 struct wmi_wmm_params_arg
*p
= NULL
;
6245 mutex_lock(&ar
->conf_mutex
);
6248 case IEEE80211_AC_VO
:
6249 p
= &arvif
->wmm_params
.ac_vo
;
6251 case IEEE80211_AC_VI
:
6252 p
= &arvif
->wmm_params
.ac_vi
;
6254 case IEEE80211_AC_BE
:
6255 p
= &arvif
->wmm_params
.ac_be
;
6257 case IEEE80211_AC_BK
:
6258 p
= &arvif
->wmm_params
.ac_bk
;
6267 p
->cwmin
= params
->cw_min
;
6268 p
->cwmax
= params
->cw_max
;
6269 p
->aifs
= params
->aifs
;
6272 * The channel time duration programmed in the HW is in absolute
6273 * microseconds, while mac80211 gives the txop in units of
6276 p
->txop
= params
->txop
* 32;
6278 if (ar
->wmi
.ops
->gen_vdev_wmm_conf
) {
6279 ret
= ath10k_wmi_vdev_wmm_conf(ar
, arvif
->vdev_id
,
6280 &arvif
->wmm_params
);
6282 ath10k_warn(ar
, "failed to set vdev wmm params on vdev %i: %d\n",
6283 arvif
->vdev_id
, ret
);
6287 /* This won't work well with multi-interface cases but it's
6288 * better than nothing.
6290 ret
= ath10k_wmi_pdev_set_wmm_params(ar
, &arvif
->wmm_params
);
6292 ath10k_warn(ar
, "failed to set wmm params: %d\n", ret
);
6297 ret
= ath10k_conf_tx_uapsd(ar
, vif
, ac
, params
->uapsd
);
6299 ath10k_warn(ar
, "failed to set sta uapsd: %d\n", ret
);
6302 mutex_unlock(&ar
->conf_mutex
);
6306 #define ATH10K_ROC_TIMEOUT_HZ (2 * HZ)
6308 static int ath10k_remain_on_channel(struct ieee80211_hw
*hw
,
6309 struct ieee80211_vif
*vif
,
6310 struct ieee80211_channel
*chan
,
6312 enum ieee80211_roc_type type
)
6314 struct ath10k
*ar
= hw
->priv
;
6315 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
6316 struct wmi_start_scan_arg arg
;
6320 mutex_lock(&ar
->conf_mutex
);
6322 spin_lock_bh(&ar
->data_lock
);
6323 switch (ar
->scan
.state
) {
6324 case ATH10K_SCAN_IDLE
:
6325 reinit_completion(&ar
->scan
.started
);
6326 reinit_completion(&ar
->scan
.completed
);
6327 reinit_completion(&ar
->scan
.on_channel
);
6328 ar
->scan
.state
= ATH10K_SCAN_STARTING
;
6329 ar
->scan
.is_roc
= true;
6330 ar
->scan
.vdev_id
= arvif
->vdev_id
;
6331 ar
->scan
.roc_freq
= chan
->center_freq
;
6332 ar
->scan
.roc_notify
= true;
6335 case ATH10K_SCAN_STARTING
:
6336 case ATH10K_SCAN_RUNNING
:
6337 case ATH10K_SCAN_ABORTING
:
6341 spin_unlock_bh(&ar
->data_lock
);
6346 scan_time_msec
= ar
->hw
->wiphy
->max_remain_on_channel_duration
* 2;
6348 memset(&arg
, 0, sizeof(arg
));
6349 ath10k_wmi_start_scan_init(ar
, &arg
);
6350 arg
.vdev_id
= arvif
->vdev_id
;
6351 arg
.scan_id
= ATH10K_SCAN_ID
;
6353 arg
.channels
[0] = chan
->center_freq
;
6354 arg
.dwell_time_active
= scan_time_msec
;
6355 arg
.dwell_time_passive
= scan_time_msec
;
6356 arg
.max_scan_time
= scan_time_msec
;
6357 arg
.scan_ctrl_flags
|= WMI_SCAN_FLAG_PASSIVE
;
6358 arg
.scan_ctrl_flags
|= WMI_SCAN_FILTER_PROBE_REQ
;
6359 arg
.burst_duration_ms
= duration
;
6361 ret
= ath10k_start_scan(ar
, &arg
);
6363 ath10k_warn(ar
, "failed to start roc scan: %d\n", ret
);
6364 spin_lock_bh(&ar
->data_lock
);
6365 ar
->scan
.state
= ATH10K_SCAN_IDLE
;
6366 spin_unlock_bh(&ar
->data_lock
);
6370 ret
= wait_for_completion_timeout(&ar
->scan
.on_channel
, 3 * HZ
);
6372 ath10k_warn(ar
, "failed to switch to channel for roc scan\n");
6374 ret
= ath10k_scan_stop(ar
);
6376 ath10k_warn(ar
, "failed to stop scan: %d\n", ret
);
6382 ieee80211_queue_delayed_work(ar
->hw
, &ar
->scan
.timeout
,
6383 msecs_to_jiffies(duration
));
6387 mutex_unlock(&ar
->conf_mutex
);
6391 static int ath10k_cancel_remain_on_channel(struct ieee80211_hw
*hw
)
6393 struct ath10k
*ar
= hw
->priv
;
6395 mutex_lock(&ar
->conf_mutex
);
6397 spin_lock_bh(&ar
->data_lock
);
6398 ar
->scan
.roc_notify
= false;
6399 spin_unlock_bh(&ar
->data_lock
);
6401 ath10k_scan_abort(ar
);
6403 mutex_unlock(&ar
->conf_mutex
);
6405 cancel_delayed_work_sync(&ar
->scan
.timeout
);
6411 * Both RTS and Fragmentation threshold are interface-specific
6412 * in ath10k, but device-specific in mac80211.
6415 static int ath10k_set_rts_threshold(struct ieee80211_hw
*hw
, u32 value
)
6417 struct ath10k
*ar
= hw
->priv
;
6418 struct ath10k_vif
*arvif
;
6421 mutex_lock(&ar
->conf_mutex
);
6422 list_for_each_entry(arvif
, &ar
->arvifs
, list
) {
6423 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac vdev %d rts threshold %d\n",
6424 arvif
->vdev_id
, value
);
6426 ret
= ath10k_mac_set_rts(arvif
, value
);
6428 ath10k_warn(ar
, "failed to set rts threshold for vdev %d: %d\n",
6429 arvif
->vdev_id
, ret
);
6433 mutex_unlock(&ar
->conf_mutex
);
6438 static int ath10k_mac_op_set_frag_threshold(struct ieee80211_hw
*hw
, u32 value
)
6440 /* Even though there's a WMI enum for fragmentation threshold no known
6441 * firmware actually implements it. Moreover it is not possible to rely
6442 * frame fragmentation to mac80211 because firmware clears the "more
6443 * fragments" bit in frame control making it impossible for remote
6444 * devices to reassemble frames.
6446 * Hence implement a dummy callback just to say fragmentation isn't
6447 * supported. This effectively prevents mac80211 from doing frame
6448 * fragmentation in software.
6453 static void ath10k_flush(struct ieee80211_hw
*hw
, struct ieee80211_vif
*vif
,
6454 u32 queues
, bool drop
)
6456 struct ath10k
*ar
= hw
->priv
;
6460 /* mac80211 doesn't care if we really xmit queued frames or not
6461 * we'll collect those frames either way if we stop/delete vdevs */
6465 mutex_lock(&ar
->conf_mutex
);
6467 if (ar
->state
== ATH10K_STATE_WEDGED
)
6470 time_left
= wait_event_timeout(ar
->htt
.empty_tx_wq
, ({
6473 spin_lock_bh(&ar
->htt
.tx_lock
);
6474 empty
= (ar
->htt
.num_pending_tx
== 0);
6475 spin_unlock_bh(&ar
->htt
.tx_lock
);
6477 skip
= (ar
->state
== ATH10K_STATE_WEDGED
) ||
6478 test_bit(ATH10K_FLAG_CRASH_FLUSH
,
6482 }), ATH10K_FLUSH_TIMEOUT_HZ
);
6484 if (time_left
== 0 || skip
)
6485 ath10k_warn(ar
, "failed to flush transmit queue (skip %i ar-state %i): %ld\n",
6486 skip
, ar
->state
, time_left
);
6489 mutex_unlock(&ar
->conf_mutex
);
6492 /* TODO: Implement this function properly
6493 * For now it is needed to reply to Probe Requests in IBSS mode.
6494 * Propably we need this information from FW.
6496 static int ath10k_tx_last_beacon(struct ieee80211_hw
*hw
)
6501 static void ath10k_reconfig_complete(struct ieee80211_hw
*hw
,
6502 enum ieee80211_reconfig_type reconfig_type
)
6504 struct ath10k
*ar
= hw
->priv
;
6506 if (reconfig_type
!= IEEE80211_RECONFIG_TYPE_RESTART
)
6509 mutex_lock(&ar
->conf_mutex
);
6511 /* If device failed to restart it will be in a different state, e.g.
6512 * ATH10K_STATE_WEDGED */
6513 if (ar
->state
== ATH10K_STATE_RESTARTED
) {
6514 ath10k_info(ar
, "device successfully recovered\n");
6515 ar
->state
= ATH10K_STATE_ON
;
6516 ieee80211_wake_queues(ar
->hw
);
6519 mutex_unlock(&ar
->conf_mutex
);
6523 ath10k_mac_update_bss_chan_survey(struct ath10k
*ar
,
6524 struct ieee80211_channel
*channel
)
6527 enum wmi_bss_survey_req_type type
= WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR
;
6529 lockdep_assert_held(&ar
->conf_mutex
);
6531 if (!test_bit(WMI_SERVICE_BSS_CHANNEL_INFO_64
, ar
->wmi
.svc_map
) ||
6532 (ar
->rx_channel
!= channel
))
6535 if (ar
->scan
.state
!= ATH10K_SCAN_IDLE
) {
6536 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "ignoring bss chan info request while scanning..\n");
6540 reinit_completion(&ar
->bss_survey_done
);
6542 ret
= ath10k_wmi_pdev_bss_chan_info_request(ar
, type
);
6544 ath10k_warn(ar
, "failed to send pdev bss chan info request\n");
6548 ret
= wait_for_completion_timeout(&ar
->bss_survey_done
, 3 * HZ
);
6550 ath10k_warn(ar
, "bss channel survey timed out\n");
6555 static int ath10k_get_survey(struct ieee80211_hw
*hw
, int idx
,
6556 struct survey_info
*survey
)
6558 struct ath10k
*ar
= hw
->priv
;
6559 struct ieee80211_supported_band
*sband
;
6560 struct survey_info
*ar_survey
= &ar
->survey
[idx
];
6563 mutex_lock(&ar
->conf_mutex
);
6565 sband
= hw
->wiphy
->bands
[NL80211_BAND_2GHZ
];
6566 if (sband
&& idx
>= sband
->n_channels
) {
6567 idx
-= sband
->n_channels
;
6572 sband
= hw
->wiphy
->bands
[NL80211_BAND_5GHZ
];
6574 if (!sband
|| idx
>= sband
->n_channels
) {
6579 ath10k_mac_update_bss_chan_survey(ar
, survey
->channel
);
6581 spin_lock_bh(&ar
->data_lock
);
6582 memcpy(survey
, ar_survey
, sizeof(*survey
));
6583 spin_unlock_bh(&ar
->data_lock
);
6585 survey
->channel
= &sband
->channels
[idx
];
6587 if (ar
->rx_channel
== survey
->channel
)
6588 survey
->filled
|= SURVEY_INFO_IN_USE
;
6591 mutex_unlock(&ar
->conf_mutex
);
6596 ath10k_mac_bitrate_mask_has_single_rate(struct ath10k
*ar
,
6597 enum nl80211_band band
,
6598 const struct cfg80211_bitrate_mask
*mask
)
6603 num_rates
+= hweight32(mask
->control
[band
].legacy
);
6605 for (i
= 0; i
< ARRAY_SIZE(mask
->control
[band
].ht_mcs
); i
++)
6606 num_rates
+= hweight8(mask
->control
[band
].ht_mcs
[i
]);
6608 for (i
= 0; i
< ARRAY_SIZE(mask
->control
[band
].vht_mcs
); i
++)
6609 num_rates
+= hweight16(mask
->control
[band
].vht_mcs
[i
]);
6611 return num_rates
== 1;
6615 ath10k_mac_bitrate_mask_get_single_nss(struct ath10k
*ar
,
6616 enum nl80211_band band
,
6617 const struct cfg80211_bitrate_mask
*mask
,
6620 struct ieee80211_supported_band
*sband
= &ar
->mac
.sbands
[band
];
6621 u16 vht_mcs_map
= le16_to_cpu(sband
->vht_cap
.vht_mcs
.tx_mcs_map
);
6623 u8 vht_nss_mask
= 0;
6626 if (mask
->control
[band
].legacy
)
6629 for (i
= 0; i
< ARRAY_SIZE(mask
->control
[band
].ht_mcs
); i
++) {
6630 if (mask
->control
[band
].ht_mcs
[i
] == 0)
6632 else if (mask
->control
[band
].ht_mcs
[i
] ==
6633 sband
->ht_cap
.mcs
.rx_mask
[i
])
6634 ht_nss_mask
|= BIT(i
);
6639 for (i
= 0; i
< ARRAY_SIZE(mask
->control
[band
].vht_mcs
); i
++) {
6640 if (mask
->control
[band
].vht_mcs
[i
] == 0)
6642 else if (mask
->control
[band
].vht_mcs
[i
] ==
6643 ath10k_mac_get_max_vht_mcs_map(vht_mcs_map
, i
))
6644 vht_nss_mask
|= BIT(i
);
6649 if (ht_nss_mask
!= vht_nss_mask
)
6652 if (ht_nss_mask
== 0)
6655 if (BIT(fls(ht_nss_mask
)) - 1 != ht_nss_mask
)
6658 *nss
= fls(ht_nss_mask
);
6664 ath10k_mac_bitrate_mask_get_single_rate(struct ath10k
*ar
,
6665 enum nl80211_band band
,
6666 const struct cfg80211_bitrate_mask
*mask
,
6669 struct ieee80211_supported_band
*sband
= &ar
->mac
.sbands
[band
];
6676 if (hweight32(mask
->control
[band
].legacy
) == 1) {
6677 rate_idx
= ffs(mask
->control
[band
].legacy
) - 1;
6679 hw_rate
= sband
->bitrates
[rate_idx
].hw_value
;
6680 bitrate
= sband
->bitrates
[rate_idx
].bitrate
;
6682 if (ath10k_mac_bitrate_is_cck(bitrate
))
6683 preamble
= WMI_RATE_PREAMBLE_CCK
;
6685 preamble
= WMI_RATE_PREAMBLE_OFDM
;
6688 *rate
= preamble
<< 6 |
6695 for (i
= 0; i
< ARRAY_SIZE(mask
->control
[band
].ht_mcs
); i
++) {
6696 if (hweight8(mask
->control
[band
].ht_mcs
[i
]) == 1) {
6698 *rate
= WMI_RATE_PREAMBLE_HT
<< 6 |
6700 (ffs(mask
->control
[band
].ht_mcs
[i
]) - 1);
6706 for (i
= 0; i
< ARRAY_SIZE(mask
->control
[band
].vht_mcs
); i
++) {
6707 if (hweight16(mask
->control
[band
].vht_mcs
[i
]) == 1) {
6709 *rate
= WMI_RATE_PREAMBLE_VHT
<< 6 |
6711 (ffs(mask
->control
[band
].vht_mcs
[i
]) - 1);
6720 static int ath10k_mac_set_fixed_rate_params(struct ath10k_vif
*arvif
,
6721 u8 rate
, u8 nss
, u8 sgi
, u8 ldpc
)
6723 struct ath10k
*ar
= arvif
->ar
;
6727 lockdep_assert_held(&ar
->conf_mutex
);
6729 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac set fixed rate params vdev %i rate 0x%02hhx nss %hhu sgi %hhu\n",
6730 arvif
->vdev_id
, rate
, nss
, sgi
);
6732 vdev_param
= ar
->wmi
.vdev_param
->fixed_rate
;
6733 ret
= ath10k_wmi_vdev_set_param(ar
, arvif
->vdev_id
, vdev_param
, rate
);
6735 ath10k_warn(ar
, "failed to set fixed rate param 0x%02x: %d\n",
6740 vdev_param
= ar
->wmi
.vdev_param
->nss
;
6741 ret
= ath10k_wmi_vdev_set_param(ar
, arvif
->vdev_id
, vdev_param
, nss
);
6743 ath10k_warn(ar
, "failed to set nss param %d: %d\n", nss
, ret
);
6747 vdev_param
= ar
->wmi
.vdev_param
->sgi
;
6748 ret
= ath10k_wmi_vdev_set_param(ar
, arvif
->vdev_id
, vdev_param
, sgi
);
6750 ath10k_warn(ar
, "failed to set sgi param %d: %d\n", sgi
, ret
);
6754 vdev_param
= ar
->wmi
.vdev_param
->ldpc
;
6755 ret
= ath10k_wmi_vdev_set_param(ar
, arvif
->vdev_id
, vdev_param
, ldpc
);
6757 ath10k_warn(ar
, "failed to set ldpc param %d: %d\n", ldpc
, ret
);
6765 ath10k_mac_can_set_bitrate_mask(struct ath10k
*ar
,
6766 enum nl80211_band band
,
6767 const struct cfg80211_bitrate_mask
*mask
)
6772 /* Due to firmware limitation in WMI_PEER_ASSOC_CMDID it is impossible
6773 * to express all VHT MCS rate masks. Effectively only the following
6774 * ranges can be used: none, 0-7, 0-8 and 0-9.
6776 for (i
= 0; i
< NL80211_VHT_NSS_MAX
; i
++) {
6777 vht_mcs
= mask
->control
[band
].vht_mcs
[i
];
6786 ath10k_warn(ar
, "refusing bitrate mask with missing 0-7 VHT MCS rates\n");
6794 static void ath10k_mac_set_bitrate_mask_iter(void *data
,
6795 struct ieee80211_sta
*sta
)
6797 struct ath10k_vif
*arvif
= data
;
6798 struct ath10k_sta
*arsta
= (struct ath10k_sta
*)sta
->drv_priv
;
6799 struct ath10k
*ar
= arvif
->ar
;
6801 if (arsta
->arvif
!= arvif
)
6804 spin_lock_bh(&ar
->data_lock
);
6805 arsta
->changed
|= IEEE80211_RC_SUPP_RATES_CHANGED
;
6806 spin_unlock_bh(&ar
->data_lock
);
6808 ieee80211_queue_work(ar
->hw
, &arsta
->update_wk
);
6811 static int ath10k_mac_op_set_bitrate_mask(struct ieee80211_hw
*hw
,
6812 struct ieee80211_vif
*vif
,
6813 const struct cfg80211_bitrate_mask
*mask
)
6815 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
6816 struct cfg80211_chan_def def
;
6817 struct ath10k
*ar
= arvif
->ar
;
6818 enum nl80211_band band
;
6819 const u8
*ht_mcs_mask
;
6820 const u16
*vht_mcs_mask
;
6828 if (ath10k_mac_vif_chan(vif
, &def
))
6831 band
= def
.chan
->band
;
6832 ht_mcs_mask
= mask
->control
[band
].ht_mcs
;
6833 vht_mcs_mask
= mask
->control
[band
].vht_mcs
;
6834 ldpc
= !!(ar
->ht_cap_info
& WMI_HT_CAP_LDPC
);
6836 sgi
= mask
->control
[band
].gi
;
6837 if (sgi
== NL80211_TXRATE_FORCE_LGI
)
6840 if (ath10k_mac_bitrate_mask_has_single_rate(ar
, band
, mask
)) {
6841 ret
= ath10k_mac_bitrate_mask_get_single_rate(ar
, band
, mask
,
6844 ath10k_warn(ar
, "failed to get single rate for vdev %i: %d\n",
6845 arvif
->vdev_id
, ret
);
6848 } else if (ath10k_mac_bitrate_mask_get_single_nss(ar
, band
, mask
,
6850 rate
= WMI_FIXED_RATE_NONE
;
6853 rate
= WMI_FIXED_RATE_NONE
;
6854 nss
= min(ar
->num_rf_chains
,
6855 max(ath10k_mac_max_ht_nss(ht_mcs_mask
),
6856 ath10k_mac_max_vht_nss(vht_mcs_mask
)));
6858 if (!ath10k_mac_can_set_bitrate_mask(ar
, band
, mask
))
6861 mutex_lock(&ar
->conf_mutex
);
6863 arvif
->bitrate_mask
= *mask
;
6864 ieee80211_iterate_stations_atomic(ar
->hw
,
6865 ath10k_mac_set_bitrate_mask_iter
,
6868 mutex_unlock(&ar
->conf_mutex
);
6871 mutex_lock(&ar
->conf_mutex
);
6873 ret
= ath10k_mac_set_fixed_rate_params(arvif
, rate
, nss
, sgi
, ldpc
);
6875 ath10k_warn(ar
, "failed to set fixed rate params on vdev %i: %d\n",
6876 arvif
->vdev_id
, ret
);
6881 mutex_unlock(&ar
->conf_mutex
);
6886 static void ath10k_sta_rc_update(struct ieee80211_hw
*hw
,
6887 struct ieee80211_vif
*vif
,
6888 struct ieee80211_sta
*sta
,
6891 struct ath10k
*ar
= hw
->priv
;
6892 struct ath10k_sta
*arsta
= (struct ath10k_sta
*)sta
->drv_priv
;
6895 spin_lock_bh(&ar
->data_lock
);
6897 ath10k_dbg(ar
, ATH10K_DBG_MAC
,
6898 "mac sta rc update for %pM changed %08x bw %d nss %d smps %d\n",
6899 sta
->addr
, changed
, sta
->bandwidth
, sta
->rx_nss
,
6902 if (changed
& IEEE80211_RC_BW_CHANGED
) {
6903 bw
= WMI_PEER_CHWIDTH_20MHZ
;
6905 switch (sta
->bandwidth
) {
6906 case IEEE80211_STA_RX_BW_20
:
6907 bw
= WMI_PEER_CHWIDTH_20MHZ
;
6909 case IEEE80211_STA_RX_BW_40
:
6910 bw
= WMI_PEER_CHWIDTH_40MHZ
;
6912 case IEEE80211_STA_RX_BW_80
:
6913 bw
= WMI_PEER_CHWIDTH_80MHZ
;
6915 case IEEE80211_STA_RX_BW_160
:
6916 ath10k_warn(ar
, "Invalid bandwidth %d in rc update for %pM\n",
6917 sta
->bandwidth
, sta
->addr
);
6918 bw
= WMI_PEER_CHWIDTH_20MHZ
;
6925 if (changed
& IEEE80211_RC_NSS_CHANGED
)
6926 arsta
->nss
= sta
->rx_nss
;
6928 if (changed
& IEEE80211_RC_SMPS_CHANGED
) {
6929 smps
= WMI_PEER_SMPS_PS_NONE
;
6931 switch (sta
->smps_mode
) {
6932 case IEEE80211_SMPS_AUTOMATIC
:
6933 case IEEE80211_SMPS_OFF
:
6934 smps
= WMI_PEER_SMPS_PS_NONE
;
6936 case IEEE80211_SMPS_STATIC
:
6937 smps
= WMI_PEER_SMPS_STATIC
;
6939 case IEEE80211_SMPS_DYNAMIC
:
6940 smps
= WMI_PEER_SMPS_DYNAMIC
;
6942 case IEEE80211_SMPS_NUM_MODES
:
6943 ath10k_warn(ar
, "Invalid smps %d in sta rc update for %pM\n",
6944 sta
->smps_mode
, sta
->addr
);
6945 smps
= WMI_PEER_SMPS_PS_NONE
;
6952 arsta
->changed
|= changed
;
6954 spin_unlock_bh(&ar
->data_lock
);
6956 ieee80211_queue_work(hw
, &arsta
->update_wk
);
6959 static u64
ath10k_get_tsf(struct ieee80211_hw
*hw
, struct ieee80211_vif
*vif
)
6962 * FIXME: Return 0 for time being. Need to figure out whether FW
6963 * has the API to fetch 64-bit local TSF
6969 static void ath10k_set_tsf(struct ieee80211_hw
*hw
, struct ieee80211_vif
*vif
,
6972 struct ath10k
*ar
= hw
->priv
;
6973 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
6974 u32 tsf_offset
, vdev_param
= ar
->wmi
.vdev_param
->set_tsf
;
6979 * Given tsf argument is entire TSF value, but firmware accepts
6980 * only TSF offset to current TSF.
6982 * get_tsf function is used to get offset value, however since
6983 * ath10k_get_tsf is not implemented properly, it will return 0 always.
6984 * Luckily all the caller functions to set_tsf, as of now, also rely on
6985 * get_tsf function to get entire tsf value such get_tsf() + tsf_delta,
6986 * final tsf offset value to firmware will be arithmetically correct.
6988 tsf_offset
= tsf
- ath10k_get_tsf(hw
, vif
);
6989 ret
= ath10k_wmi_vdev_set_param(ar
, arvif
->vdev_id
,
6990 vdev_param
, tsf_offset
);
6991 if (ret
&& ret
!= -EOPNOTSUPP
)
6992 ath10k_warn(ar
, "failed to set tsf offset: %d\n", ret
);
6995 static int ath10k_ampdu_action(struct ieee80211_hw
*hw
,
6996 struct ieee80211_vif
*vif
,
6997 struct ieee80211_ampdu_params
*params
)
6999 struct ath10k
*ar
= hw
->priv
;
7000 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
7001 struct ieee80211_sta
*sta
= params
->sta
;
7002 enum ieee80211_ampdu_mlme_action action
= params
->action
;
7003 u16 tid
= params
->tid
;
7005 ath10k_dbg(ar
, ATH10K_DBG_MAC
, "mac ampdu vdev_id %i sta %pM tid %hu action %d\n",
7006 arvif
->vdev_id
, sta
->addr
, tid
, action
);
7009 case IEEE80211_AMPDU_RX_START
:
7010 case IEEE80211_AMPDU_RX_STOP
:
7011 /* HTT AddBa/DelBa events trigger mac80211 Rx BA session
7012 * creation/removal. Do we need to verify this?
7015 case IEEE80211_AMPDU_TX_START
:
7016 case IEEE80211_AMPDU_TX_STOP_CONT
:
7017 case IEEE80211_AMPDU_TX_STOP_FLUSH
:
7018 case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT
:
7019 case IEEE80211_AMPDU_TX_OPERATIONAL
:
7020 /* Firmware offloads Tx aggregation entirely so deny mac80211
7021 * Tx aggregation requests.
7030 ath10k_mac_update_rx_channel(struct ath10k
*ar
,
7031 struct ieee80211_chanctx_conf
*ctx
,
7032 struct ieee80211_vif_chanctx_switch
*vifs
,
7035 struct cfg80211_chan_def
*def
= NULL
;
7037 /* Both locks are required because ar->rx_channel is modified. This
7038 * allows readers to hold either lock.
7040 lockdep_assert_held(&ar
->conf_mutex
);
7041 lockdep_assert_held(&ar
->data_lock
);
7043 WARN_ON(ctx
&& vifs
);
7044 WARN_ON(vifs
&& n_vifs
!= 1);
7046 /* FIXME: Sort of an optimization and a workaround. Peers and vifs are
7047 * on a linked list now. Doing a lookup peer -> vif -> chanctx for each
7048 * ppdu on Rx may reduce performance on low-end systems. It should be
7049 * possible to make tables/hashmaps to speed the lookup up (be vary of
7050 * cpu data cache lines though regarding sizes) but to keep the initial
7051 * implementation simple and less intrusive fallback to the slow lookup
7052 * only for multi-channel cases. Single-channel cases will remain to
7053 * use the old channel derival and thus performance should not be
7057 if (!ctx
&& ath10k_mac_num_chanctxs(ar
) == 1) {
7058 ieee80211_iter_chan_contexts_atomic(ar
->hw
,
7059 ath10k_mac_get_any_chandef_iter
,
7063 def
= &vifs
[0].new_ctx
->def
;
7065 ar
->rx_channel
= def
->chan
;
7066 } else if ((ctx
&& ath10k_mac_num_chanctxs(ar
) == 0) ||
7067 (ctx
&& (ar
->state
== ATH10K_STATE_RESTARTED
))) {
7068 /* During driver restart due to firmware assert, since mac80211
7069 * already has valid channel context for given radio, channel
7070 * context iteration return num_chanctx > 0. So fix rx_channel
7071 * when restart is in progress.
7073 ar
->rx_channel
= ctx
->def
.chan
;
7075 ar
->rx_channel
= NULL
;
7081 ath10k_mac_update_vif_chan(struct ath10k
*ar
,
7082 struct ieee80211_vif_chanctx_switch
*vifs
,
7085 struct ath10k_vif
*arvif
;
7089 lockdep_assert_held(&ar
->conf_mutex
);
7091 /* First stop monitor interface. Some FW versions crash if there's a
7092 * lone monitor interface.
7094 if (ar
->monitor_started
)
7095 ath10k_monitor_stop(ar
);
7097 for (i
= 0; i
< n_vifs
; i
++) {
7098 arvif
= ath10k_vif_to_arvif(vifs
[i
].vif
);
7100 ath10k_dbg(ar
, ATH10K_DBG_MAC
,
7101 "mac chanctx switch vdev_id %i freq %hu->%hu width %d->%d\n",
7103 vifs
[i
].old_ctx
->def
.chan
->center_freq
,
7104 vifs
[i
].new_ctx
->def
.chan
->center_freq
,
7105 vifs
[i
].old_ctx
->def
.width
,
7106 vifs
[i
].new_ctx
->def
.width
);
7108 if (WARN_ON(!arvif
->is_started
))
7111 if (WARN_ON(!arvif
->is_up
))
7114 ret
= ath10k_wmi_vdev_down(ar
, arvif
->vdev_id
);
7116 ath10k_warn(ar
, "failed to down vdev %d: %d\n",
7117 arvif
->vdev_id
, ret
);
7122 /* All relevant vdevs are downed and associated channel resources
7123 * should be available for the channel switch now.
7126 spin_lock_bh(&ar
->data_lock
);
7127 ath10k_mac_update_rx_channel(ar
, NULL
, vifs
, n_vifs
);
7128 spin_unlock_bh(&ar
->data_lock
);
7130 for (i
= 0; i
< n_vifs
; i
++) {
7131 arvif
= ath10k_vif_to_arvif(vifs
[i
].vif
);
7133 if (WARN_ON(!arvif
->is_started
))
7136 if (WARN_ON(!arvif
->is_up
))
7139 ret
= ath10k_mac_setup_bcn_tmpl(arvif
);
7141 ath10k_warn(ar
, "failed to update bcn tmpl during csa: %d\n",
7144 ret
= ath10k_mac_setup_prb_tmpl(arvif
);
7146 ath10k_warn(ar
, "failed to update prb tmpl during csa: %d\n",
7149 ret
= ath10k_vdev_restart(arvif
, &vifs
[i
].new_ctx
->def
);
7151 ath10k_warn(ar
, "failed to restart vdev %d: %d\n",
7152 arvif
->vdev_id
, ret
);
7156 ret
= ath10k_wmi_vdev_up(arvif
->ar
, arvif
->vdev_id
, arvif
->aid
,
7159 ath10k_warn(ar
, "failed to bring vdev up %d: %d\n",
7160 arvif
->vdev_id
, ret
);
7165 ath10k_monitor_recalc(ar
);
7169 ath10k_mac_op_add_chanctx(struct ieee80211_hw
*hw
,
7170 struct ieee80211_chanctx_conf
*ctx
)
7172 struct ath10k
*ar
= hw
->priv
;
7174 ath10k_dbg(ar
, ATH10K_DBG_MAC
,
7175 "mac chanctx add freq %hu width %d ptr %pK\n",
7176 ctx
->def
.chan
->center_freq
, ctx
->def
.width
, ctx
);
7178 mutex_lock(&ar
->conf_mutex
);
7180 spin_lock_bh(&ar
->data_lock
);
7181 ath10k_mac_update_rx_channel(ar
, ctx
, NULL
, 0);
7182 spin_unlock_bh(&ar
->data_lock
);
7184 ath10k_recalc_radar_detection(ar
);
7185 ath10k_monitor_recalc(ar
);
7187 mutex_unlock(&ar
->conf_mutex
);
7193 ath10k_mac_op_remove_chanctx(struct ieee80211_hw
*hw
,
7194 struct ieee80211_chanctx_conf
*ctx
)
7196 struct ath10k
*ar
= hw
->priv
;
7198 ath10k_dbg(ar
, ATH10K_DBG_MAC
,
7199 "mac chanctx remove freq %hu width %d ptr %pK\n",
7200 ctx
->def
.chan
->center_freq
, ctx
->def
.width
, ctx
);
7202 mutex_lock(&ar
->conf_mutex
);
7204 spin_lock_bh(&ar
->data_lock
);
7205 ath10k_mac_update_rx_channel(ar
, NULL
, NULL
, 0);
7206 spin_unlock_bh(&ar
->data_lock
);
7208 ath10k_recalc_radar_detection(ar
);
7209 ath10k_monitor_recalc(ar
);
7211 mutex_unlock(&ar
->conf_mutex
);
7214 struct ath10k_mac_change_chanctx_arg
{
7215 struct ieee80211_chanctx_conf
*ctx
;
7216 struct ieee80211_vif_chanctx_switch
*vifs
;
7222 ath10k_mac_change_chanctx_cnt_iter(void *data
, u8
*mac
,
7223 struct ieee80211_vif
*vif
)
7225 struct ath10k_mac_change_chanctx_arg
*arg
= data
;
7227 if (rcu_access_pointer(vif
->chanctx_conf
) != arg
->ctx
)
7234 ath10k_mac_change_chanctx_fill_iter(void *data
, u8
*mac
,
7235 struct ieee80211_vif
*vif
)
7237 struct ath10k_mac_change_chanctx_arg
*arg
= data
;
7238 struct ieee80211_chanctx_conf
*ctx
;
7240 ctx
= rcu_access_pointer(vif
->chanctx_conf
);
7241 if (ctx
!= arg
->ctx
)
7244 if (WARN_ON(arg
->next_vif
== arg
->n_vifs
))
7247 arg
->vifs
[arg
->next_vif
].vif
= vif
;
7248 arg
->vifs
[arg
->next_vif
].old_ctx
= ctx
;
7249 arg
->vifs
[arg
->next_vif
].new_ctx
= ctx
;
7254 ath10k_mac_op_change_chanctx(struct ieee80211_hw
*hw
,
7255 struct ieee80211_chanctx_conf
*ctx
,
7258 struct ath10k
*ar
= hw
->priv
;
7259 struct ath10k_mac_change_chanctx_arg arg
= { .ctx
= ctx
};
7261 mutex_lock(&ar
->conf_mutex
);
7263 ath10k_dbg(ar
, ATH10K_DBG_MAC
,
7264 "mac chanctx change freq %hu width %d ptr %pK changed %x\n",
7265 ctx
->def
.chan
->center_freq
, ctx
->def
.width
, ctx
, changed
);
7267 /* This shouldn't really happen because channel switching should use
7268 * switch_vif_chanctx().
7270 if (WARN_ON(changed
& IEEE80211_CHANCTX_CHANGE_CHANNEL
))
7273 if (changed
& IEEE80211_CHANCTX_CHANGE_WIDTH
) {
7274 ieee80211_iterate_active_interfaces_atomic(
7276 IEEE80211_IFACE_ITER_NORMAL
,
7277 ath10k_mac_change_chanctx_cnt_iter
,
7279 if (arg
.n_vifs
== 0)
7282 arg
.vifs
= kcalloc(arg
.n_vifs
, sizeof(arg
.vifs
[0]),
7287 ieee80211_iterate_active_interfaces_atomic(
7289 IEEE80211_IFACE_ITER_NORMAL
,
7290 ath10k_mac_change_chanctx_fill_iter
,
7292 ath10k_mac_update_vif_chan(ar
, arg
.vifs
, arg
.n_vifs
);
7297 ath10k_recalc_radar_detection(ar
);
7299 /* FIXME: How to configure Rx chains properly? */
7301 /* No other actions are actually necessary. Firmware maintains channel
7302 * definitions per vdev internally and there's no host-side channel
7303 * context abstraction to configure, e.g. channel width.
7307 mutex_unlock(&ar
->conf_mutex
);
7311 ath10k_mac_op_assign_vif_chanctx(struct ieee80211_hw
*hw
,
7312 struct ieee80211_vif
*vif
,
7313 struct ieee80211_chanctx_conf
*ctx
)
7315 struct ath10k
*ar
= hw
->priv
;
7316 struct ath10k_vif
*arvif
= (void *)vif
->drv_priv
;
7319 mutex_lock(&ar
->conf_mutex
);
7321 ath10k_dbg(ar
, ATH10K_DBG_MAC
,
7322 "mac chanctx assign ptr %pK vdev_id %i\n",
7323 ctx
, arvif
->vdev_id
);
7325 if (WARN_ON(arvif
->is_started
)) {
7326 mutex_unlock(&ar
->conf_mutex
);
7330 ret
= ath10k_vdev_start(arvif
, &ctx
->def
);
7332 ath10k_warn(ar
, "failed to start vdev %i addr %pM on freq %d: %d\n",
7333 arvif
->vdev_id
, vif
->addr
,
7334 ctx
->def
.chan
->center_freq
, ret
);
7338 arvif
->is_started
= true;
7340 ret
= ath10k_mac_vif_setup_ps(arvif
);
7342 ath10k_warn(ar
, "failed to update vdev %i ps: %d\n",
7343 arvif
->vdev_id
, ret
);
7347 if (vif
->type
== NL80211_IFTYPE_MONITOR
) {
7348 ret
= ath10k_wmi_vdev_up(ar
, arvif
->vdev_id
, 0, vif
->addr
);
7350 ath10k_warn(ar
, "failed to up monitor vdev %i: %d\n",
7351 arvif
->vdev_id
, ret
);
7355 arvif
->is_up
= true;
7358 mutex_unlock(&ar
->conf_mutex
);
7362 ath10k_vdev_stop(arvif
);
7363 arvif
->is_started
= false;
7364 ath10k_mac_vif_setup_ps(arvif
);
7367 mutex_unlock(&ar
->conf_mutex
);
7372 ath10k_mac_op_unassign_vif_chanctx(struct ieee80211_hw
*hw
,
7373 struct ieee80211_vif
*vif
,
7374 struct ieee80211_chanctx_conf
*ctx
)
7376 struct ath10k
*ar
= hw
->priv
;
7377 struct ath10k_vif
*arvif
= (void *)vif
->drv_priv
;
7380 mutex_lock(&ar
->conf_mutex
);
7382 ath10k_dbg(ar
, ATH10K_DBG_MAC
,
7383 "mac chanctx unassign ptr %pK vdev_id %i\n",
7384 ctx
, arvif
->vdev_id
);
7386 WARN_ON(!arvif
->is_started
);
7388 if (vif
->type
== NL80211_IFTYPE_MONITOR
) {
7389 WARN_ON(!arvif
->is_up
);
7391 ret
= ath10k_wmi_vdev_down(ar
, arvif
->vdev_id
);
7393 ath10k_warn(ar
, "failed to down monitor vdev %i: %d\n",
7394 arvif
->vdev_id
, ret
);
7396 arvif
->is_up
= false;
7399 ret
= ath10k_vdev_stop(arvif
);
7401 ath10k_warn(ar
, "failed to stop vdev %i: %d\n",
7402 arvif
->vdev_id
, ret
);
7404 arvif
->is_started
= false;
7406 mutex_unlock(&ar
->conf_mutex
);
7410 ath10k_mac_op_switch_vif_chanctx(struct ieee80211_hw
*hw
,
7411 struct ieee80211_vif_chanctx_switch
*vifs
,
7413 enum ieee80211_chanctx_switch_mode mode
)
7415 struct ath10k
*ar
= hw
->priv
;
7417 mutex_lock(&ar
->conf_mutex
);
7419 ath10k_dbg(ar
, ATH10K_DBG_MAC
,
7420 "mac chanctx switch n_vifs %d mode %d\n",
7422 ath10k_mac_update_vif_chan(ar
, vifs
, n_vifs
);
7424 mutex_unlock(&ar
->conf_mutex
);
7428 static const struct ieee80211_ops ath10k_ops
= {
7429 .tx
= ath10k_mac_op_tx
,
7430 .wake_tx_queue
= ath10k_mac_op_wake_tx_queue
,
7431 .start
= ath10k_start
,
7432 .stop
= ath10k_stop
,
7433 .config
= ath10k_config
,
7434 .add_interface
= ath10k_add_interface
,
7435 .remove_interface
= ath10k_remove_interface
,
7436 .configure_filter
= ath10k_configure_filter
,
7437 .bss_info_changed
= ath10k_bss_info_changed
,
7438 .hw_scan
= ath10k_hw_scan
,
7439 .cancel_hw_scan
= ath10k_cancel_hw_scan
,
7440 .set_key
= ath10k_set_key
,
7441 .set_default_unicast_key
= ath10k_set_default_unicast_key
,
7442 .sta_state
= ath10k_sta_state
,
7443 .conf_tx
= ath10k_conf_tx
,
7444 .remain_on_channel
= ath10k_remain_on_channel
,
7445 .cancel_remain_on_channel
= ath10k_cancel_remain_on_channel
,
7446 .set_rts_threshold
= ath10k_set_rts_threshold
,
7447 .set_frag_threshold
= ath10k_mac_op_set_frag_threshold
,
7448 .flush
= ath10k_flush
,
7449 .tx_last_beacon
= ath10k_tx_last_beacon
,
7450 .set_antenna
= ath10k_set_antenna
,
7451 .get_antenna
= ath10k_get_antenna
,
7452 .reconfig_complete
= ath10k_reconfig_complete
,
7453 .get_survey
= ath10k_get_survey
,
7454 .set_bitrate_mask
= ath10k_mac_op_set_bitrate_mask
,
7455 .sta_rc_update
= ath10k_sta_rc_update
,
7456 .get_tsf
= ath10k_get_tsf
,
7457 .set_tsf
= ath10k_set_tsf
,
7458 .ampdu_action
= ath10k_ampdu_action
,
7459 .get_et_sset_count
= ath10k_debug_get_et_sset_count
,
7460 .get_et_stats
= ath10k_debug_get_et_stats
,
7461 .get_et_strings
= ath10k_debug_get_et_strings
,
7462 .add_chanctx
= ath10k_mac_op_add_chanctx
,
7463 .remove_chanctx
= ath10k_mac_op_remove_chanctx
,
7464 .change_chanctx
= ath10k_mac_op_change_chanctx
,
7465 .assign_vif_chanctx
= ath10k_mac_op_assign_vif_chanctx
,
7466 .unassign_vif_chanctx
= ath10k_mac_op_unassign_vif_chanctx
,
7467 .switch_vif_chanctx
= ath10k_mac_op_switch_vif_chanctx
,
7469 CFG80211_TESTMODE_CMD(ath10k_tm_cmd
)
7472 .suspend
= ath10k_wow_op_suspend
,
7473 .resume
= ath10k_wow_op_resume
,
7475 #ifdef CONFIG_MAC80211_DEBUGFS
7476 .sta_add_debugfs
= ath10k_sta_add_debugfs
,
7477 .sta_statistics
= ath10k_sta_statistics
,
7481 #define CHAN2G(_channel, _freq, _flags) { \
7482 .band = NL80211_BAND_2GHZ, \
7483 .hw_value = (_channel), \
7484 .center_freq = (_freq), \
7485 .flags = (_flags), \
7486 .max_antenna_gain = 0, \
7490 #define CHAN5G(_channel, _freq, _flags) { \
7491 .band = NL80211_BAND_5GHZ, \
7492 .hw_value = (_channel), \
7493 .center_freq = (_freq), \
7494 .flags = (_flags), \
7495 .max_antenna_gain = 0, \
7499 static const struct ieee80211_channel ath10k_2ghz_channels
[] = {
7509 CHAN2G(10, 2457, 0),
7510 CHAN2G(11, 2462, 0),
7511 CHAN2G(12, 2467, 0),
7512 CHAN2G(13, 2472, 0),
7513 CHAN2G(14, 2484, 0),
7516 static const struct ieee80211_channel ath10k_5ghz_channels
[] = {
7517 CHAN5G(36, 5180, 0),
7518 CHAN5G(40, 5200, 0),
7519 CHAN5G(44, 5220, 0),
7520 CHAN5G(48, 5240, 0),
7521 CHAN5G(52, 5260, 0),
7522 CHAN5G(56, 5280, 0),
7523 CHAN5G(60, 5300, 0),
7524 CHAN5G(64, 5320, 0),
7525 CHAN5G(100, 5500, 0),
7526 CHAN5G(104, 5520, 0),
7527 CHAN5G(108, 5540, 0),
7528 CHAN5G(112, 5560, 0),
7529 CHAN5G(116, 5580, 0),
7530 CHAN5G(120, 5600, 0),
7531 CHAN5G(124, 5620, 0),
7532 CHAN5G(128, 5640, 0),
7533 CHAN5G(132, 5660, 0),
7534 CHAN5G(136, 5680, 0),
7535 CHAN5G(140, 5700, 0),
7536 CHAN5G(144, 5720, 0),
7537 CHAN5G(149, 5745, 0),
7538 CHAN5G(153, 5765, 0),
7539 CHAN5G(157, 5785, 0),
7540 CHAN5G(161, 5805, 0),
7541 CHAN5G(165, 5825, 0),
7544 struct ath10k
*ath10k_mac_create(size_t priv_size
)
7546 struct ieee80211_hw
*hw
;
7547 struct ieee80211_ops
*ops
;
7550 ops
= kmemdup(&ath10k_ops
, sizeof(ath10k_ops
), GFP_KERNEL
);
7554 hw
= ieee80211_alloc_hw(sizeof(struct ath10k
) + priv_size
, ops
);
7567 void ath10k_mac_destroy(struct ath10k
*ar
)
7569 struct ieee80211_ops
*ops
= ar
->ops
;
7571 ieee80211_free_hw(ar
->hw
);
7575 static const struct ieee80211_iface_limit ath10k_if_limits
[] = {
7578 .types
= BIT(NL80211_IFTYPE_STATION
)
7579 | BIT(NL80211_IFTYPE_P2P_CLIENT
)
7583 .types
= BIT(NL80211_IFTYPE_P2P_GO
)
7587 .types
= BIT(NL80211_IFTYPE_P2P_DEVICE
)
7591 .types
= BIT(NL80211_IFTYPE_AP
)
7592 #ifdef CONFIG_MAC80211_MESH
7593 | BIT(NL80211_IFTYPE_MESH_POINT
)
7598 static const struct ieee80211_iface_limit ath10k_10x_if_limits
[] = {
7601 .types
= BIT(NL80211_IFTYPE_AP
)
7602 #ifdef CONFIG_MAC80211_MESH
7603 | BIT(NL80211_IFTYPE_MESH_POINT
)
7608 .types
= BIT(NL80211_IFTYPE_STATION
)
7612 static const struct ieee80211_iface_combination ath10k_if_comb
[] = {
7614 .limits
= ath10k_if_limits
,
7615 .n_limits
= ARRAY_SIZE(ath10k_if_limits
),
7616 .max_interfaces
= 8,
7617 .num_different_channels
= 1,
7618 .beacon_int_infra_match
= true,
7622 static const struct ieee80211_iface_combination ath10k_10x_if_comb
[] = {
7624 .limits
= ath10k_10x_if_limits
,
7625 .n_limits
= ARRAY_SIZE(ath10k_10x_if_limits
),
7626 .max_interfaces
= 8,
7627 .num_different_channels
= 1,
7628 .beacon_int_infra_match
= true,
7629 #ifdef CONFIG_ATH10K_DFS_CERTIFIED
7630 .radar_detect_widths
= BIT(NL80211_CHAN_WIDTH_20_NOHT
) |
7631 BIT(NL80211_CHAN_WIDTH_20
) |
7632 BIT(NL80211_CHAN_WIDTH_40
) |
7633 BIT(NL80211_CHAN_WIDTH_80
),
7638 static const struct ieee80211_iface_limit ath10k_tlv_if_limit
[] = {
7641 .types
= BIT(NL80211_IFTYPE_STATION
),
7645 .types
= BIT(NL80211_IFTYPE_AP
) |
7646 #ifdef CONFIG_MAC80211_MESH
7647 BIT(NL80211_IFTYPE_MESH_POINT
) |
7649 BIT(NL80211_IFTYPE_P2P_CLIENT
) |
7650 BIT(NL80211_IFTYPE_P2P_GO
),
7654 .types
= BIT(NL80211_IFTYPE_P2P_DEVICE
),
7658 static const struct ieee80211_iface_limit ath10k_tlv_qcs_if_limit
[] = {
7661 .types
= BIT(NL80211_IFTYPE_STATION
),
7665 .types
= BIT(NL80211_IFTYPE_P2P_CLIENT
),
7669 .types
= BIT(NL80211_IFTYPE_AP
) |
7670 #ifdef CONFIG_MAC80211_MESH
7671 BIT(NL80211_IFTYPE_MESH_POINT
) |
7673 BIT(NL80211_IFTYPE_P2P_GO
),
7677 .types
= BIT(NL80211_IFTYPE_P2P_DEVICE
),
7681 static const struct ieee80211_iface_limit ath10k_tlv_if_limit_ibss
[] = {
7684 .types
= BIT(NL80211_IFTYPE_STATION
),
7688 .types
= BIT(NL80211_IFTYPE_ADHOC
),
7692 /* FIXME: This is not thouroughly tested. These combinations may over- or
7693 * underestimate hw/fw capabilities.
7695 static struct ieee80211_iface_combination ath10k_tlv_if_comb
[] = {
7697 .limits
= ath10k_tlv_if_limit
,
7698 .num_different_channels
= 1,
7699 .max_interfaces
= 4,
7700 .n_limits
= ARRAY_SIZE(ath10k_tlv_if_limit
),
7703 .limits
= ath10k_tlv_if_limit_ibss
,
7704 .num_different_channels
= 1,
7705 .max_interfaces
= 2,
7706 .n_limits
= ARRAY_SIZE(ath10k_tlv_if_limit_ibss
),
7710 static struct ieee80211_iface_combination ath10k_tlv_qcs_if_comb
[] = {
7712 .limits
= ath10k_tlv_if_limit
,
7713 .num_different_channels
= 1,
7714 .max_interfaces
= 4,
7715 .n_limits
= ARRAY_SIZE(ath10k_tlv_if_limit
),
7718 .limits
= ath10k_tlv_qcs_if_limit
,
7719 .num_different_channels
= 2,
7720 .max_interfaces
= 4,
7721 .n_limits
= ARRAY_SIZE(ath10k_tlv_qcs_if_limit
),
7724 .limits
= ath10k_tlv_if_limit_ibss
,
7725 .num_different_channels
= 1,
7726 .max_interfaces
= 2,
7727 .n_limits
= ARRAY_SIZE(ath10k_tlv_if_limit_ibss
),
7731 static const struct ieee80211_iface_limit ath10k_10_4_if_limits
[] = {
7734 .types
= BIT(NL80211_IFTYPE_STATION
),
7738 .types
= BIT(NL80211_IFTYPE_AP
)
7739 #ifdef CONFIG_MAC80211_MESH
7740 | BIT(NL80211_IFTYPE_MESH_POINT
)
7745 static const struct ieee80211_iface_combination ath10k_10_4_if_comb
[] = {
7747 .limits
= ath10k_10_4_if_limits
,
7748 .n_limits
= ARRAY_SIZE(ath10k_10_4_if_limits
),
7749 .max_interfaces
= 16,
7750 .num_different_channels
= 1,
7751 .beacon_int_infra_match
= true,
7752 #ifdef CONFIG_ATH10K_DFS_CERTIFIED
7753 .radar_detect_widths
= BIT(NL80211_CHAN_WIDTH_20_NOHT
) |
7754 BIT(NL80211_CHAN_WIDTH_20
) |
7755 BIT(NL80211_CHAN_WIDTH_40
) |
7756 BIT(NL80211_CHAN_WIDTH_80
),
7761 static void ath10k_get_arvif_iter(void *data
, u8
*mac
,
7762 struct ieee80211_vif
*vif
)
7764 struct ath10k_vif_iter
*arvif_iter
= data
;
7765 struct ath10k_vif
*arvif
= ath10k_vif_to_arvif(vif
);
7767 if (arvif
->vdev_id
== arvif_iter
->vdev_id
)
7768 arvif_iter
->arvif
= arvif
;
7771 struct ath10k_vif
*ath10k_get_arvif(struct ath10k
*ar
, u32 vdev_id
)
7773 struct ath10k_vif_iter arvif_iter
;
7776 memset(&arvif_iter
, 0, sizeof(struct ath10k_vif_iter
));
7777 arvif_iter
.vdev_id
= vdev_id
;
7779 flags
= IEEE80211_IFACE_ITER_RESUME_ALL
;
7780 ieee80211_iterate_active_interfaces_atomic(ar
->hw
,
7782 ath10k_get_arvif_iter
,
7784 if (!arvif_iter
.arvif
) {
7785 ath10k_warn(ar
, "No VIF found for vdev %d\n", vdev_id
);
7789 return arvif_iter
.arvif
;
7792 int ath10k_mac_register(struct ath10k
*ar
)
7794 static const u32 cipher_suites
[] = {
7795 WLAN_CIPHER_SUITE_WEP40
,
7796 WLAN_CIPHER_SUITE_WEP104
,
7797 WLAN_CIPHER_SUITE_TKIP
,
7798 WLAN_CIPHER_SUITE_CCMP
,
7799 WLAN_CIPHER_SUITE_AES_CMAC
,
7801 struct ieee80211_supported_band
*band
;
7805 SET_IEEE80211_PERM_ADDR(ar
->hw
, ar
->mac_addr
);
7807 SET_IEEE80211_DEV(ar
->hw
, ar
->dev
);
7809 BUILD_BUG_ON((ARRAY_SIZE(ath10k_2ghz_channels
) +
7810 ARRAY_SIZE(ath10k_5ghz_channels
)) !=
7813 if (ar
->phy_capability
& WHAL_WLAN_11G_CAPABILITY
) {
7814 channels
= kmemdup(ath10k_2ghz_channels
,
7815 sizeof(ath10k_2ghz_channels
),
7822 band
= &ar
->mac
.sbands
[NL80211_BAND_2GHZ
];
7823 band
->n_channels
= ARRAY_SIZE(ath10k_2ghz_channels
);
7824 band
->channels
= channels
;
7826 if (ar
->hw_params
.cck_rate_map_rev2
) {
7827 band
->n_bitrates
= ath10k_g_rates_rev2_size
;
7828 band
->bitrates
= ath10k_g_rates_rev2
;
7830 band
->n_bitrates
= ath10k_g_rates_size
;
7831 band
->bitrates
= ath10k_g_rates
;
7834 ar
->hw
->wiphy
->bands
[NL80211_BAND_2GHZ
] = band
;
7837 if (ar
->phy_capability
& WHAL_WLAN_11A_CAPABILITY
) {
7838 channels
= kmemdup(ath10k_5ghz_channels
,
7839 sizeof(ath10k_5ghz_channels
),
7846 band
= &ar
->mac
.sbands
[NL80211_BAND_5GHZ
];
7847 band
->n_channels
= ARRAY_SIZE(ath10k_5ghz_channels
);
7848 band
->channels
= channels
;
7849 band
->n_bitrates
= ath10k_a_rates_size
;
7850 band
->bitrates
= ath10k_a_rates
;
7851 ar
->hw
->wiphy
->bands
[NL80211_BAND_5GHZ
] = band
;
7854 ath10k_mac_setup_ht_vht_cap(ar
);
7856 ar
->hw
->wiphy
->interface_modes
=
7857 BIT(NL80211_IFTYPE_STATION
) |
7858 BIT(NL80211_IFTYPE_AP
) |
7859 BIT(NL80211_IFTYPE_MESH_POINT
);
7861 ar
->hw
->wiphy
->available_antennas_rx
= ar
->cfg_rx_chainmask
;
7862 ar
->hw
->wiphy
->available_antennas_tx
= ar
->cfg_tx_chainmask
;
7864 if (!test_bit(ATH10K_FW_FEATURE_NO_P2P
, ar
->normal_mode_fw
.fw_file
.fw_features
))
7865 ar
->hw
->wiphy
->interface_modes
|=
7866 BIT(NL80211_IFTYPE_P2P_DEVICE
) |
7867 BIT(NL80211_IFTYPE_P2P_CLIENT
) |
7868 BIT(NL80211_IFTYPE_P2P_GO
);
7870 ieee80211_hw_set(ar
->hw
, SIGNAL_DBM
);
7871 ieee80211_hw_set(ar
->hw
, SUPPORTS_PS
);
7872 ieee80211_hw_set(ar
->hw
, SUPPORTS_DYNAMIC_PS
);
7873 ieee80211_hw_set(ar
->hw
, MFP_CAPABLE
);
7874 ieee80211_hw_set(ar
->hw
, REPORTS_TX_ACK_STATUS
);
7875 ieee80211_hw_set(ar
->hw
, HAS_RATE_CONTROL
);
7876 ieee80211_hw_set(ar
->hw
, AP_LINK_PS
);
7877 ieee80211_hw_set(ar
->hw
, SPECTRUM_MGMT
);
7878 ieee80211_hw_set(ar
->hw
, SUPPORT_FAST_XMIT
);
7879 ieee80211_hw_set(ar
->hw
, CONNECTION_MONITOR
);
7880 ieee80211_hw_set(ar
->hw
, SUPPORTS_PER_STA_GTK
);
7881 ieee80211_hw_set(ar
->hw
, WANT_MONITOR_VIF
);
7882 ieee80211_hw_set(ar
->hw
, CHANCTX_STA_CSA
);
7883 ieee80211_hw_set(ar
->hw
, QUEUE_CONTROL
);
7885 if (!test_bit(ATH10K_FLAG_RAW_MODE
, &ar
->dev_flags
))
7886 ieee80211_hw_set(ar
->hw
, SW_CRYPTO_CONTROL
);
7888 ar
->hw
->wiphy
->features
|= NL80211_FEATURE_STATIC_SMPS
;
7889 ar
->hw
->wiphy
->flags
|= WIPHY_FLAG_IBSS_RSN
;
7891 if (ar
->ht_cap_info
& WMI_HT_CAP_DYNAMIC_SMPS
)
7892 ar
->hw
->wiphy
->features
|= NL80211_FEATURE_DYNAMIC_SMPS
;
7894 if (ar
->ht_cap_info
& WMI_HT_CAP_ENABLED
) {
7895 ieee80211_hw_set(ar
->hw
, AMPDU_AGGREGATION
);
7896 ieee80211_hw_set(ar
->hw
, TX_AMPDU_SETUP_IN_HW
);
7899 ar
->hw
->wiphy
->max_scan_ssids
= WLAN_SCAN_PARAMS_MAX_SSID
;
7900 ar
->hw
->wiphy
->max_scan_ie_len
= WLAN_SCAN_PARAMS_MAX_IE_LEN
;
7902 ar
->hw
->vif_data_size
= sizeof(struct ath10k_vif
);
7903 ar
->hw
->sta_data_size
= sizeof(struct ath10k_sta
);
7904 ar
->hw
->txq_data_size
= sizeof(struct ath10k_txq
);
7906 ar
->hw
->max_listen_interval
= ATH10K_MAX_HW_LISTEN_INTERVAL
;
7908 if (test_bit(WMI_SERVICE_BEACON_OFFLOAD
, ar
->wmi
.svc_map
)) {
7909 ar
->hw
->wiphy
->flags
|= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD
;
7911 /* Firmware delivers WPS/P2P Probe Requests frames to driver so
7912 * that userspace (e.g. wpa_supplicant/hostapd) can generate
7913 * correct Probe Responses. This is more of a hack advert..
7915 ar
->hw
->wiphy
->probe_resp_offload
|=
7916 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS
|
7917 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2
|
7918 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P
;
7921 if (test_bit(WMI_SERVICE_TDLS
, ar
->wmi
.svc_map
))
7922 ar
->hw
->wiphy
->flags
|= WIPHY_FLAG_SUPPORTS_TDLS
;
7924 ar
->hw
->wiphy
->flags
|= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL
;
7925 ar
->hw
->wiphy
->flags
|= WIPHY_FLAG_HAS_CHANNEL_SWITCH
;
7926 ar
->hw
->wiphy
->max_remain_on_channel_duration
= 5000;
7928 ar
->hw
->wiphy
->flags
|= WIPHY_FLAG_AP_UAPSD
;
7929 ar
->hw
->wiphy
->features
|= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE
|
7930 NL80211_FEATURE_AP_SCAN
;
7932 ar
->hw
->wiphy
->max_ap_assoc_sta
= ar
->max_num_stations
;
7934 ret
= ath10k_wow_init(ar
);
7936 ath10k_warn(ar
, "failed to init wow: %d\n", ret
);
7940 wiphy_ext_feature_set(ar
->hw
->wiphy
, NL80211_EXT_FEATURE_VHT_IBSS
);
7943 * on LL hardware queues are managed entirely by the FW
7944 * so we only advertise to mac we can do the queues thing
7946 ar
->hw
->queues
= IEEE80211_MAX_QUEUES
;
7948 /* vdev_ids are used as hw queue numbers. Make sure offchan tx queue is
7949 * something that vdev_ids can't reach so that we don't stop the queue
7952 ar
->hw
->offchannel_tx_hw_queue
= IEEE80211_MAX_QUEUES
- 1;
7954 switch (ar
->running_fw
->fw_file
.wmi_op_version
) {
7955 case ATH10K_FW_WMI_OP_VERSION_MAIN
:
7956 ar
->hw
->wiphy
->iface_combinations
= ath10k_if_comb
;
7957 ar
->hw
->wiphy
->n_iface_combinations
=
7958 ARRAY_SIZE(ath10k_if_comb
);
7959 ar
->hw
->wiphy
->interface_modes
|= BIT(NL80211_IFTYPE_ADHOC
);
7961 case ATH10K_FW_WMI_OP_VERSION_TLV
:
7962 if (test_bit(WMI_SERVICE_ADAPTIVE_OCS
, ar
->wmi
.svc_map
)) {
7963 ar
->hw
->wiphy
->iface_combinations
=
7964 ath10k_tlv_qcs_if_comb
;
7965 ar
->hw
->wiphy
->n_iface_combinations
=
7966 ARRAY_SIZE(ath10k_tlv_qcs_if_comb
);
7968 ar
->hw
->wiphy
->iface_combinations
= ath10k_tlv_if_comb
;
7969 ar
->hw
->wiphy
->n_iface_combinations
=
7970 ARRAY_SIZE(ath10k_tlv_if_comb
);
7972 ar
->hw
->wiphy
->interface_modes
|= BIT(NL80211_IFTYPE_ADHOC
);
7974 case ATH10K_FW_WMI_OP_VERSION_10_1
:
7975 case ATH10K_FW_WMI_OP_VERSION_10_2
:
7976 case ATH10K_FW_WMI_OP_VERSION_10_2_4
:
7977 ar
->hw
->wiphy
->iface_combinations
= ath10k_10x_if_comb
;
7978 ar
->hw
->wiphy
->n_iface_combinations
=
7979 ARRAY_SIZE(ath10k_10x_if_comb
);
7981 case ATH10K_FW_WMI_OP_VERSION_10_4
:
7982 ar
->hw
->wiphy
->iface_combinations
= ath10k_10_4_if_comb
;
7983 ar
->hw
->wiphy
->n_iface_combinations
=
7984 ARRAY_SIZE(ath10k_10_4_if_comb
);
7986 case ATH10K_FW_WMI_OP_VERSION_UNSET
:
7987 case ATH10K_FW_WMI_OP_VERSION_MAX
:
7993 if (!test_bit(ATH10K_FLAG_RAW_MODE
, &ar
->dev_flags
))
7994 ar
->hw
->netdev_features
= NETIF_F_HW_CSUM
;
7996 if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED
)) {
7997 /* Init ath dfs pattern detector */
7998 ar
->ath_common
.debug_mask
= ATH_DBG_DFS
;
7999 ar
->dfs_detector
= dfs_pattern_detector_init(&ar
->ath_common
,
8002 if (!ar
->dfs_detector
)
8003 ath10k_warn(ar
, "failed to initialise DFS pattern detector\n");
8006 /* Current wake_tx_queue implementation imposes a significant
8007 * performance penalty in some setups. The tx scheduling code needs
8008 * more work anyway so disable the wake_tx_queue unless firmware
8009 * supports the pull-push mechanism.
8011 if (!test_bit(ATH10K_FW_FEATURE_PEER_FLOW_CONTROL
,
8012 ar
->running_fw
->fw_file
.fw_features
))
8013 ar
->ops
->wake_tx_queue
= NULL
;
8015 ret
= ath_regd_init(&ar
->ath_common
.regulatory
, ar
->hw
->wiphy
,
8016 ath10k_reg_notifier
);
8018 ath10k_err(ar
, "failed to initialise regulatory: %i\n", ret
);
8019 goto err_dfs_detector_exit
;
8022 ar
->hw
->wiphy
->cipher_suites
= cipher_suites
;
8023 ar
->hw
->wiphy
->n_cipher_suites
= ARRAY_SIZE(cipher_suites
);
8025 ret
= ieee80211_register_hw(ar
->hw
);
8027 ath10k_err(ar
, "failed to register ieee80211: %d\n", ret
);
8028 goto err_dfs_detector_exit
;
8031 if (!ath_is_world_regd(&ar
->ath_common
.regulatory
)) {
8032 ret
= regulatory_hint(ar
->hw
->wiphy
,
8033 ar
->ath_common
.regulatory
.alpha2
);
8035 goto err_unregister
;
8041 ieee80211_unregister_hw(ar
->hw
);
8043 err_dfs_detector_exit
:
8044 if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED
) && ar
->dfs_detector
)
8045 ar
->dfs_detector
->exit(ar
->dfs_detector
);
8048 kfree(ar
->mac
.sbands
[NL80211_BAND_2GHZ
].channels
);
8049 kfree(ar
->mac
.sbands
[NL80211_BAND_5GHZ
].channels
);
8051 SET_IEEE80211_DEV(ar
->hw
, NULL
);
8055 void ath10k_mac_unregister(struct ath10k
*ar
)
8057 ieee80211_unregister_hw(ar
->hw
);
8059 if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED
) && ar
->dfs_detector
)
8060 ar
->dfs_detector
->exit(ar
->dfs_detector
);
8062 kfree(ar
->mac
.sbands
[NL80211_BAND_2GHZ
].channels
);
8063 kfree(ar
->mac
.sbands
[NL80211_BAND_5GHZ
].channels
);
8065 SET_IEEE80211_DEV(ar
->hw
, NULL
);