]> git.proxmox.com Git - mirror_ubuntu-hirsute-kernel.git/blob - drivers/net/wireless/ath/ath10k/wmi.h
projects / mirror_ubuntu-hirsute-kernel.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
ath10k: Fix the parsing error in service available event
[mirror_ubuntu-hirsute-kernel.git] / drivers / net / wireless / ath / ath10k / wmi.h
1 /* SPDX-License-Identifier: ISC */
2 /*
3 * Copyright (c) 2005-2011 Atheros Communications Inc.
4 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
5 * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
6 */
7
8 #ifndef _WMI_H_
9 #define _WMI_H_
10
11 #include <linux/types.h>
12 #include <linux/ieee80211.h>
13
14 /*
15 * This file specifies the WMI interface for the Unified Software
16 * Architecture.
17 *
18 * It includes definitions of all the commands and events. Commands are
19 * messages from the host to the target. Events and Replies are messages
20 * from the target to the host.
21 *
22 * Ownership of correctness in regards to WMI commands belongs to the host
23 * driver and the target is not required to validate parameters for value,
24 * proper range, or any other checking.
25 *
26 * Guidelines for extending this interface are below.
27 *
28 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
29 *
30 * 2. Use ONLY u32 type for defining member variables within WMI
31 * command/event structures. Do not use u8, u16, bool or
32 * enum types within these structures.
33 *
34 * 3. DO NOT define bit fields within structures. Implement bit fields
35 * using masks if necessary. Do not use the programming language's bit
36 * field definition.
37 *
38 * 4. Define macros for encode/decode of u8, u16 fields within
39 * the u32 variables. Use these macros for set/get of these fields.
40 * Try to use this to optimize the structure without bloating it with
41 * u32 variables for every lower sized field.
42 *
43 * 5. Do not use PACK/UNPACK attributes for the structures as each member
44 * variable is already 4-byte aligned by virtue of being a u32
45 * type.
46 *
47 * 6. Comment each parameter part of the WMI command/event structure by
48 * using the 2 stars at the beginning of C comment instead of one star to
49 * enable HTML document generation using Doxygen.
50 *
51 */
52
53 /* Control Path */
54 struct wmi_cmd_hdr {
55 __le32 cmd_id;
56 } __packed;
57
58 #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF
59 #define WMI_CMD_HDR_CMD_ID_LSB 0
60 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000
61 #define WMI_CMD_HDR_PLT_PRIV_LSB 24
62
63 #define HTC_PROTOCOL_VERSION 0x0002
64 #define WMI_PROTOCOL_VERSION 0x0002
65
66 /*
67 * There is no signed version of __le32, so for a temporary solution come
68 * up with our own version. The idea is from fs/ntfs/endian.h.
69 *
70 * Use a_ prefix so that it doesn't conflict if we get proper support to
71 * linux/types.h.
72 */
73 typedef __s32 __bitwise a_sle32;
74
75 static inline a_sle32 a_cpu_to_sle32(s32 val)
76 {
77 return (__force a_sle32)cpu_to_le32(val);
78 }
79
80 static inline s32 a_sle32_to_cpu(a_sle32 val)
81 {
82 return le32_to_cpu((__force __le32)val);
83 }
84
85 enum wmi_service {
86 WMI_SERVICE_BEACON_OFFLOAD = 0,
87 WMI_SERVICE_SCAN_OFFLOAD,
88 WMI_SERVICE_ROAM_OFFLOAD,
89 WMI_SERVICE_BCN_MISS_OFFLOAD,
90 WMI_SERVICE_STA_PWRSAVE,
91 WMI_SERVICE_STA_ADVANCED_PWRSAVE,
92 WMI_SERVICE_AP_UAPSD,
93 WMI_SERVICE_AP_DFS,
94 WMI_SERVICE_11AC,
95 WMI_SERVICE_BLOCKACK,
96 WMI_SERVICE_PHYERR,
97 WMI_SERVICE_BCN_FILTER,
98 WMI_SERVICE_RTT,
99 WMI_SERVICE_RATECTRL,
100 WMI_SERVICE_WOW,
101 WMI_SERVICE_RATECTRL_CACHE,
102 WMI_SERVICE_IRAM_TIDS,
103 WMI_SERVICE_ARPNS_OFFLOAD,
104 WMI_SERVICE_NLO,
105 WMI_SERVICE_GTK_OFFLOAD,
106 WMI_SERVICE_SCAN_SCH,
107 WMI_SERVICE_CSA_OFFLOAD,
108 WMI_SERVICE_CHATTER,
109 WMI_SERVICE_COEX_FREQAVOID,
110 WMI_SERVICE_PACKET_POWER_SAVE,
111 WMI_SERVICE_FORCE_FW_HANG,
112 WMI_SERVICE_GPIO,
113 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
114 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
115 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
116 WMI_SERVICE_STA_KEEP_ALIVE,
117 WMI_SERVICE_TX_ENCAP,
118 WMI_SERVICE_BURST,
119 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,
120 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,
121 WMI_SERVICE_ROAM_SCAN_OFFLOAD,
122 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
123 WMI_SERVICE_EARLY_RX,
124 WMI_SERVICE_STA_SMPS,
125 WMI_SERVICE_FWTEST,
126 WMI_SERVICE_STA_WMMAC,
127 WMI_SERVICE_TDLS,
128 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE,
129 WMI_SERVICE_ADAPTIVE_OCS,
130 WMI_SERVICE_BA_SSN_SUPPORT,
131 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE,
132 WMI_SERVICE_WLAN_HB,
133 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT,
134 WMI_SERVICE_BATCH_SCAN,
135 WMI_SERVICE_QPOWER,
136 WMI_SERVICE_PLMREQ,
137 WMI_SERVICE_THERMAL_MGMT,
138 WMI_SERVICE_RMC,
139 WMI_SERVICE_MHF_OFFLOAD,
140 WMI_SERVICE_COEX_SAR,
141 WMI_SERVICE_BCN_TXRATE_OVERRIDE,
142 WMI_SERVICE_NAN,
143 WMI_SERVICE_L1SS_STAT,
144 WMI_SERVICE_ESTIMATE_LINKSPEED,
145 WMI_SERVICE_OBSS_SCAN,
146 WMI_SERVICE_TDLS_OFFCHAN,
147 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,
148 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA,
149 WMI_SERVICE_IBSS_PWRSAVE,
150 WMI_SERVICE_LPASS,
151 WMI_SERVICE_EXTSCAN,
152 WMI_SERVICE_D0WOW,
153 WMI_SERVICE_HSOFFLOAD,
154 WMI_SERVICE_ROAM_HO_OFFLOAD,
155 WMI_SERVICE_RX_FULL_REORDER,
156 WMI_SERVICE_DHCP_OFFLOAD,
157 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT,
158 WMI_SERVICE_MDNS_OFFLOAD,
159 WMI_SERVICE_SAP_AUTH_OFFLOAD,
160 WMI_SERVICE_ATF,
161 WMI_SERVICE_COEX_GPIO,
162 WMI_SERVICE_ENHANCED_PROXY_STA,
163 WMI_SERVICE_TT,
164 WMI_SERVICE_PEER_CACHING,
165 WMI_SERVICE_AUX_SPECTRAL_INTF,
166 WMI_SERVICE_AUX_CHAN_LOAD_INTF,
167 WMI_SERVICE_BSS_CHANNEL_INFO_64,
168 WMI_SERVICE_EXT_RES_CFG_SUPPORT,
169 WMI_SERVICE_MESH_11S,
170 WMI_SERVICE_MESH_NON_11S,
171 WMI_SERVICE_PEER_STATS,
172 WMI_SERVICE_RESTRT_CHNL_SUPPORT,
173 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
174 WMI_SERVICE_TX_MODE_PUSH_ONLY,
175 WMI_SERVICE_TX_MODE_PUSH_PULL,
176 WMI_SERVICE_TX_MODE_DYNAMIC,
177 WMI_SERVICE_VDEV_RX_FILTER,
178 WMI_SERVICE_BTCOEX,
179 WMI_SERVICE_CHECK_CAL_VERSION,
180 WMI_SERVICE_DBGLOG_WARN2,
181 WMI_SERVICE_BTCOEX_DUTY_CYCLE,
182 WMI_SERVICE_4_WIRE_COEX_SUPPORT,
183 WMI_SERVICE_EXTENDED_NSS_SUPPORT,
184 WMI_SERVICE_PROG_GPIO_BAND_SELECT,
185 WMI_SERVICE_SMART_LOGGING_SUPPORT,
186 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
187 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
188 WMI_SERVICE_MGMT_TX_WMI,
189 WMI_SERVICE_TDLS_WIDER_BANDWIDTH,
190 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
191 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT,
192 WMI_SERVICE_TPC_STATS_FINAL,
193 WMI_SERVICE_RESET_CHIP,
194 WMI_SERVICE_SPOOF_MAC_SUPPORT,
195 WMI_SERVICE_TX_DATA_ACK_RSSI,
196 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
197 WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
198 WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT,
199 WMI_SERVICE_THERM_THROT,
200 WMI_SERVICE_RTT_RESPONDER_ROLE,
201 WMI_SERVICE_PER_PACKET_SW_ENCRYPT,
202 WMI_SERVICE_REPORT_AIRTIME,
203 WMI_SERVICE_SYNC_DELETE_CMDS,
204 WMI_SERVICE_TX_PWR_PER_PEER,
205 WMI_SERVICE_SUPPORT_EXTEND_ADDRESS,
206 WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
207 WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
208
209 /* Remember to add the new value to wmi_service_name()! */
210
211 /* keep last */
212 WMI_SERVICE_MAX,
213 };
214
215 enum wmi_10x_service {
216 WMI_10X_SERVICE_BEACON_OFFLOAD = 0,
217 WMI_10X_SERVICE_SCAN_OFFLOAD,
218 WMI_10X_SERVICE_ROAM_OFFLOAD,
219 WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
220 WMI_10X_SERVICE_STA_PWRSAVE,
221 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
222 WMI_10X_SERVICE_AP_UAPSD,
223 WMI_10X_SERVICE_AP_DFS,
224 WMI_10X_SERVICE_11AC,
225 WMI_10X_SERVICE_BLOCKACK,
226 WMI_10X_SERVICE_PHYERR,
227 WMI_10X_SERVICE_BCN_FILTER,
228 WMI_10X_SERVICE_RTT,
229 WMI_10X_SERVICE_RATECTRL,
230 WMI_10X_SERVICE_WOW,
231 WMI_10X_SERVICE_RATECTRL_CACHE,
232 WMI_10X_SERVICE_IRAM_TIDS,
233 WMI_10X_SERVICE_BURST,
234
235 /* introduced in 10.2 */
236 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
237 WMI_10X_SERVICE_FORCE_FW_HANG,
238 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
239 WMI_10X_SERVICE_ATF,
240 WMI_10X_SERVICE_COEX_GPIO,
241 WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
242 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
243 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
244 WMI_10X_SERVICE_MESH,
245 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
246 WMI_10X_SERVICE_PEER_STATS,
247 WMI_10X_SERVICE_RESET_CHIP,
248 WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
249 WMI_10X_SERVICE_VDEV_BCN_RATE_CONTROL,
250 WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
251 WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
252 };
253
254 enum wmi_main_service {
255 WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0,
256 WMI_MAIN_SERVICE_SCAN_OFFLOAD,
257 WMI_MAIN_SERVICE_ROAM_OFFLOAD,
258 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
259 WMI_MAIN_SERVICE_STA_PWRSAVE,
260 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
261 WMI_MAIN_SERVICE_AP_UAPSD,
262 WMI_MAIN_SERVICE_AP_DFS,
263 WMI_MAIN_SERVICE_11AC,
264 WMI_MAIN_SERVICE_BLOCKACK,
265 WMI_MAIN_SERVICE_PHYERR,
266 WMI_MAIN_SERVICE_BCN_FILTER,
267 WMI_MAIN_SERVICE_RTT,
268 WMI_MAIN_SERVICE_RATECTRL,
269 WMI_MAIN_SERVICE_WOW,
270 WMI_MAIN_SERVICE_RATECTRL_CACHE,
271 WMI_MAIN_SERVICE_IRAM_TIDS,
272 WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
273 WMI_MAIN_SERVICE_NLO,
274 WMI_MAIN_SERVICE_GTK_OFFLOAD,
275 WMI_MAIN_SERVICE_SCAN_SCH,
276 WMI_MAIN_SERVICE_CSA_OFFLOAD,
277 WMI_MAIN_SERVICE_CHATTER,
278 WMI_MAIN_SERVICE_COEX_FREQAVOID,
279 WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
280 WMI_MAIN_SERVICE_FORCE_FW_HANG,
281 WMI_MAIN_SERVICE_GPIO,
282 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
283 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
284 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
285 WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
286 WMI_MAIN_SERVICE_TX_ENCAP,
287 };
288
289 enum wmi_10_4_service {
290 WMI_10_4_SERVICE_BEACON_OFFLOAD = 0,
291 WMI_10_4_SERVICE_SCAN_OFFLOAD,
292 WMI_10_4_SERVICE_ROAM_OFFLOAD,
293 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
294 WMI_10_4_SERVICE_STA_PWRSAVE,
295 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
296 WMI_10_4_SERVICE_AP_UAPSD,
297 WMI_10_4_SERVICE_AP_DFS,
298 WMI_10_4_SERVICE_11AC,
299 WMI_10_4_SERVICE_BLOCKACK,
300 WMI_10_4_SERVICE_PHYERR,
301 WMI_10_4_SERVICE_BCN_FILTER,
302 WMI_10_4_SERVICE_RTT,
303 WMI_10_4_SERVICE_RATECTRL,
304 WMI_10_4_SERVICE_WOW,
305 WMI_10_4_SERVICE_RATECTRL_CACHE,
306 WMI_10_4_SERVICE_IRAM_TIDS,
307 WMI_10_4_SERVICE_BURST,
308 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
309 WMI_10_4_SERVICE_GTK_OFFLOAD,
310 WMI_10_4_SERVICE_SCAN_SCH,
311 WMI_10_4_SERVICE_CSA_OFFLOAD,
312 WMI_10_4_SERVICE_CHATTER,
313 WMI_10_4_SERVICE_COEX_FREQAVOID,
314 WMI_10_4_SERVICE_PACKET_POWER_SAVE,
315 WMI_10_4_SERVICE_FORCE_FW_HANG,
316 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
317 WMI_10_4_SERVICE_GPIO,
318 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
319 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
320 WMI_10_4_SERVICE_STA_KEEP_ALIVE,
321 WMI_10_4_SERVICE_TX_ENCAP,
322 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
323 WMI_10_4_SERVICE_EARLY_RX,
324 WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
325 WMI_10_4_SERVICE_TT,
326 WMI_10_4_SERVICE_ATF,
327 WMI_10_4_SERVICE_PEER_CACHING,
328 WMI_10_4_SERVICE_COEX_GPIO,
329 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
330 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
331 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
332 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
333 WMI_10_4_SERVICE_MESH_NON_11S,
334 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
335 WMI_10_4_SERVICE_PEER_STATS,
336 WMI_10_4_SERVICE_MESH_11S,
337 WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
338 WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
339 WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
340 WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
341 WMI_10_4_SERVICE_VDEV_RX_FILTER,
342 WMI_10_4_SERVICE_BTCOEX,
343 WMI_10_4_SERVICE_CHECK_CAL_VERSION,
344 WMI_10_4_SERVICE_DBGLOG_WARN2,
345 WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
346 WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
347 WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
348 WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
349 WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
350 WMI_10_4_SERVICE_TDLS,
351 WMI_10_4_SERVICE_TDLS_OFFCHAN,
352 WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
353 WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
354 WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
355 WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
356 WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
357 WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
358 WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
359 WMI_10_4_SERVICE_TPC_STATS_FINAL,
360 WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT,
361 WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
362 WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY,
363 WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
364 WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
365 WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL,
366 WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
367 WMI_10_4_SERVICE_HTT_ASSERT_TRIGGER_SUPPORT,
368 WMI_10_4_SERVICE_VDEV_FILTER_NEIGHBOR_RX_PACKETS,
369 WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
370 WMI_10_4_SERVICE_PEER_CHWIDTH_CHANGE,
371 WMI_10_4_SERVICE_RX_FILTER_OUT_COUNT,
372 WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
373 WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
374 WMI_10_4_SERVICE_REPORT_AIRTIME,
375 WMI_10_4_SERVICE_TX_PWR_PER_PEER,
376 WMI_10_4_SERVICE_FETCH_PEER_TX_PN,
377 WMI_10_4_SERVICE_MULTIPLE_VDEV_RESTART,
378 WMI_10_4_SERVICE_ENHANCED_RADIO_COUNTERS,
379 WMI_10_4_SERVICE_QINQ_SUPPORT,
380 WMI_10_4_SERVICE_RESET_CHIP,
381 };
382
383 static inline char *wmi_service_name(enum wmi_service service_id)
384 {
385 #define SVCSTR(x) case x: return #x
386
387 switch (service_id) {
388 SVCSTR(WMI_SERVICE_BEACON_OFFLOAD);
389 SVCSTR(WMI_SERVICE_SCAN_OFFLOAD);
390 SVCSTR(WMI_SERVICE_ROAM_OFFLOAD);
391 SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD);
392 SVCSTR(WMI_SERVICE_STA_PWRSAVE);
393 SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE);
394 SVCSTR(WMI_SERVICE_AP_UAPSD);
395 SVCSTR(WMI_SERVICE_AP_DFS);
396 SVCSTR(WMI_SERVICE_11AC);
397 SVCSTR(WMI_SERVICE_BLOCKACK);
398 SVCSTR(WMI_SERVICE_PHYERR);
399 SVCSTR(WMI_SERVICE_BCN_FILTER);
400 SVCSTR(WMI_SERVICE_RTT);
401 SVCSTR(WMI_SERVICE_RATECTRL);
402 SVCSTR(WMI_SERVICE_WOW);
403 SVCSTR(WMI_SERVICE_RATECTRL_CACHE);
404 SVCSTR(WMI_SERVICE_IRAM_TIDS);
405 SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD);
406 SVCSTR(WMI_SERVICE_NLO);
407 SVCSTR(WMI_SERVICE_GTK_OFFLOAD);
408 SVCSTR(WMI_SERVICE_SCAN_SCH);
409 SVCSTR(WMI_SERVICE_CSA_OFFLOAD);
410 SVCSTR(WMI_SERVICE_CHATTER);
411 SVCSTR(WMI_SERVICE_COEX_FREQAVOID);
412 SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE);
413 SVCSTR(WMI_SERVICE_FORCE_FW_HANG);
414 SVCSTR(WMI_SERVICE_GPIO);
415 SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM);
416 SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG);
417 SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG);
418 SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE);
419 SVCSTR(WMI_SERVICE_TX_ENCAP);
420 SVCSTR(WMI_SERVICE_BURST);
421 SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT);
422 SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT);
423 SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD);
424 SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC);
425 SVCSTR(WMI_SERVICE_EARLY_RX);
426 SVCSTR(WMI_SERVICE_STA_SMPS);
427 SVCSTR(WMI_SERVICE_FWTEST);
428 SVCSTR(WMI_SERVICE_STA_WMMAC);
429 SVCSTR(WMI_SERVICE_TDLS);
430 SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE);
431 SVCSTR(WMI_SERVICE_ADAPTIVE_OCS);
432 SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT);
433 SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE);
434 SVCSTR(WMI_SERVICE_WLAN_HB);
435 SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT);
436 SVCSTR(WMI_SERVICE_BATCH_SCAN);
437 SVCSTR(WMI_SERVICE_QPOWER);
438 SVCSTR(WMI_SERVICE_PLMREQ);
439 SVCSTR(WMI_SERVICE_THERMAL_MGMT);
440 SVCSTR(WMI_SERVICE_RMC);
441 SVCSTR(WMI_SERVICE_MHF_OFFLOAD);
442 SVCSTR(WMI_SERVICE_COEX_SAR);
443 SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE);
444 SVCSTR(WMI_SERVICE_NAN);
445 SVCSTR(WMI_SERVICE_L1SS_STAT);
446 SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED);
447 SVCSTR(WMI_SERVICE_OBSS_SCAN);
448 SVCSTR(WMI_SERVICE_TDLS_OFFCHAN);
449 SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA);
450 SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA);
451 SVCSTR(WMI_SERVICE_IBSS_PWRSAVE);
452 SVCSTR(WMI_SERVICE_LPASS);
453 SVCSTR(WMI_SERVICE_EXTSCAN);
454 SVCSTR(WMI_SERVICE_D0WOW);
455 SVCSTR(WMI_SERVICE_HSOFFLOAD);
456 SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD);
457 SVCSTR(WMI_SERVICE_RX_FULL_REORDER);
458 SVCSTR(WMI_SERVICE_DHCP_OFFLOAD);
459 SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT);
460 SVCSTR(WMI_SERVICE_MDNS_OFFLOAD);
461 SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD);
462 SVCSTR(WMI_SERVICE_ATF);
463 SVCSTR(WMI_SERVICE_COEX_GPIO);
464 SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA);
465 SVCSTR(WMI_SERVICE_TT);
466 SVCSTR(WMI_SERVICE_PEER_CACHING);
467 SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF);
468 SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF);
469 SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);
470 SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT);
471 SVCSTR(WMI_SERVICE_MESH_11S);
472 SVCSTR(WMI_SERVICE_MESH_NON_11S);
473 SVCSTR(WMI_SERVICE_PEER_STATS);
474 SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT);
475 SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT);
476 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY);
477 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL);
478 SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC);
479 SVCSTR(WMI_SERVICE_VDEV_RX_FILTER);
480 SVCSTR(WMI_SERVICE_BTCOEX);
481 SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION);
482 SVCSTR(WMI_SERVICE_DBGLOG_WARN2);
483 SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE);
484 SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT);
485 SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT);
486 SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT);
487 SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT);
488 SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE);
489 SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY);
490 SVCSTR(WMI_SERVICE_MGMT_TX_WMI);
491 SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH);
492 SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS);
493 SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT);
494 SVCSTR(WMI_SERVICE_TPC_STATS_FINAL);
495 SVCSTR(WMI_SERVICE_RESET_CHIP);
496 SVCSTR(WMI_SERVICE_SPOOF_MAC_SUPPORT);
497 SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI);
498 SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT);
499 SVCSTR(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT);
500 SVCSTR(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT);
501 SVCSTR(WMI_SERVICE_THERM_THROT);
502 SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE);
503 SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT);
504 SVCSTR(WMI_SERVICE_REPORT_AIRTIME);
505 SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS);
506 SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER);
507 SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS);
508 SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
509 SVCSTR(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT);
510
511 case WMI_SERVICE_MAX:
512 return NULL;
513 }
514
515 #undef SVCSTR
516
517 return NULL;
518 }
519
520 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
521 ((svc_id) < (len) && \
522 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \
523 BIT((svc_id) % (sizeof(u32))))
524
525 /* This extension is required to accommodate new services, current limit
526 * for wmi_services is 64 as target is using only 4-bits of each 32-bit
527 * wmi_service word. Extending this to make use of remaining unused bits
528 * for new services.
529 */
530 #define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
531 ((svc_id) >= (len) && \
532 __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \
533 BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4))
534
535 #define SVCMAP(x, y, len) \
536 do { \
537 if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \
538 (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \
539 __set_bit(y, out); \
540 } while (0)
541
542 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
543 size_t len)
544 {
545 SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD,
546 WMI_SERVICE_BEACON_OFFLOAD, len);
547 SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD,
548 WMI_SERVICE_SCAN_OFFLOAD, len);
549 SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD,
550 WMI_SERVICE_ROAM_OFFLOAD, len);
551 SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
552 WMI_SERVICE_BCN_MISS_OFFLOAD, len);
553 SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE,
554 WMI_SERVICE_STA_PWRSAVE, len);
555 SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
556 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
557 SVCMAP(WMI_10X_SERVICE_AP_UAPSD,
558 WMI_SERVICE_AP_UAPSD, len);
559 SVCMAP(WMI_10X_SERVICE_AP_DFS,
560 WMI_SERVICE_AP_DFS, len);
561 SVCMAP(WMI_10X_SERVICE_11AC,
562 WMI_SERVICE_11AC, len);
563 SVCMAP(WMI_10X_SERVICE_BLOCKACK,
564 WMI_SERVICE_BLOCKACK, len);
565 SVCMAP(WMI_10X_SERVICE_PHYERR,
566 WMI_SERVICE_PHYERR, len);
567 SVCMAP(WMI_10X_SERVICE_BCN_FILTER,
568 WMI_SERVICE_BCN_FILTER, len);
569 SVCMAP(WMI_10X_SERVICE_RTT,
570 WMI_SERVICE_RTT, len);
571 SVCMAP(WMI_10X_SERVICE_RATECTRL,
572 WMI_SERVICE_RATECTRL, len);
573 SVCMAP(WMI_10X_SERVICE_WOW,
574 WMI_SERVICE_WOW, len);
575 SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE,
576 WMI_SERVICE_RATECTRL_CACHE, len);
577 SVCMAP(WMI_10X_SERVICE_IRAM_TIDS,
578 WMI_SERVICE_IRAM_TIDS, len);
579 SVCMAP(WMI_10X_SERVICE_BURST,
580 WMI_SERVICE_BURST, len);
581 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
582 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
583 SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG,
584 WMI_SERVICE_FORCE_FW_HANG, len);
585 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
586 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
587 SVCMAP(WMI_10X_SERVICE_ATF,
588 WMI_SERVICE_ATF, len);
589 SVCMAP(WMI_10X_SERVICE_COEX_GPIO,
590 WMI_SERVICE_COEX_GPIO, len);
591 SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
592 WMI_SERVICE_AUX_SPECTRAL_INTF, len);
593 SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
594 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
595 SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
596 WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
597 SVCMAP(WMI_10X_SERVICE_MESH,
598 WMI_SERVICE_MESH_11S, len);
599 SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
600 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
601 SVCMAP(WMI_10X_SERVICE_PEER_STATS,
602 WMI_SERVICE_PEER_STATS, len);
603 SVCMAP(WMI_10X_SERVICE_RESET_CHIP,
604 WMI_SERVICE_RESET_CHIP, len);
605 SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
606 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
607 SVCMAP(WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
608 WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, len);
609 SVCMAP(WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
610 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
611 }
612
613 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out,
614 size_t len)
615 {
616 SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD,
617 WMI_SERVICE_BEACON_OFFLOAD, len);
618 SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD,
619 WMI_SERVICE_SCAN_OFFLOAD, len);
620 SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD,
621 WMI_SERVICE_ROAM_OFFLOAD, len);
622 SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
623 WMI_SERVICE_BCN_MISS_OFFLOAD, len);
624 SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE,
625 WMI_SERVICE_STA_PWRSAVE, len);
626 SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
627 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
628 SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD,
629 WMI_SERVICE_AP_UAPSD, len);
630 SVCMAP(WMI_MAIN_SERVICE_AP_DFS,
631 WMI_SERVICE_AP_DFS, len);
632 SVCMAP(WMI_MAIN_SERVICE_11AC,
633 WMI_SERVICE_11AC, len);
634 SVCMAP(WMI_MAIN_SERVICE_BLOCKACK,
635 WMI_SERVICE_BLOCKACK, len);
636 SVCMAP(WMI_MAIN_SERVICE_PHYERR,
637 WMI_SERVICE_PHYERR, len);
638 SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER,
639 WMI_SERVICE_BCN_FILTER, len);
640 SVCMAP(WMI_MAIN_SERVICE_RTT,
641 WMI_SERVICE_RTT, len);
642 SVCMAP(WMI_MAIN_SERVICE_RATECTRL,
643 WMI_SERVICE_RATECTRL, len);
644 SVCMAP(WMI_MAIN_SERVICE_WOW,
645 WMI_SERVICE_WOW, len);
646 SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE,
647 WMI_SERVICE_RATECTRL_CACHE, len);
648 SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS,
649 WMI_SERVICE_IRAM_TIDS, len);
650 SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
651 WMI_SERVICE_ARPNS_OFFLOAD, len);
652 SVCMAP(WMI_MAIN_SERVICE_NLO,
653 WMI_SERVICE_NLO, len);
654 SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD,
655 WMI_SERVICE_GTK_OFFLOAD, len);
656 SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH,
657 WMI_SERVICE_SCAN_SCH, len);
658 SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD,
659 WMI_SERVICE_CSA_OFFLOAD, len);
660 SVCMAP(WMI_MAIN_SERVICE_CHATTER,
661 WMI_SERVICE_CHATTER, len);
662 SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID,
663 WMI_SERVICE_COEX_FREQAVOID, len);
664 SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
665 WMI_SERVICE_PACKET_POWER_SAVE, len);
666 SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG,
667 WMI_SERVICE_FORCE_FW_HANG, len);
668 SVCMAP(WMI_MAIN_SERVICE_GPIO,
669 WMI_SERVICE_GPIO, len);
670 SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
671 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len);
672 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
673 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
674 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
675 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
676 SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
677 WMI_SERVICE_STA_KEEP_ALIVE, len);
678 SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP,
679 WMI_SERVICE_TX_ENCAP, len);
680 }
681
682 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
683 size_t len)
684 {
685 SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD,
686 WMI_SERVICE_BEACON_OFFLOAD, len);
687 SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD,
688 WMI_SERVICE_SCAN_OFFLOAD, len);
689 SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD,
690 WMI_SERVICE_ROAM_OFFLOAD, len);
691 SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
692 WMI_SERVICE_BCN_MISS_OFFLOAD, len);
693 SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE,
694 WMI_SERVICE_STA_PWRSAVE, len);
695 SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
696 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
697 SVCMAP(WMI_10_4_SERVICE_AP_UAPSD,
698 WMI_SERVICE_AP_UAPSD, len);
699 SVCMAP(WMI_10_4_SERVICE_AP_DFS,
700 WMI_SERVICE_AP_DFS, len);
701 SVCMAP(WMI_10_4_SERVICE_11AC,
702 WMI_SERVICE_11AC, len);
703 SVCMAP(WMI_10_4_SERVICE_BLOCKACK,
704 WMI_SERVICE_BLOCKACK, len);
705 SVCMAP(WMI_10_4_SERVICE_PHYERR,
706 WMI_SERVICE_PHYERR, len);
707 SVCMAP(WMI_10_4_SERVICE_BCN_FILTER,
708 WMI_SERVICE_BCN_FILTER, len);
709 SVCMAP(WMI_10_4_SERVICE_RTT,
710 WMI_SERVICE_RTT, len);
711 SVCMAP(WMI_10_4_SERVICE_RATECTRL,
712 WMI_SERVICE_RATECTRL, len);
713 SVCMAP(WMI_10_4_SERVICE_WOW,
714 WMI_SERVICE_WOW, len);
715 SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE,
716 WMI_SERVICE_RATECTRL_CACHE, len);
717 SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS,
718 WMI_SERVICE_IRAM_TIDS, len);
719 SVCMAP(WMI_10_4_SERVICE_BURST,
720 WMI_SERVICE_BURST, len);
721 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
722 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
723 SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD,
724 WMI_SERVICE_GTK_OFFLOAD, len);
725 SVCMAP(WMI_10_4_SERVICE_SCAN_SCH,
726 WMI_SERVICE_SCAN_SCH, len);
727 SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD,
728 WMI_SERVICE_CSA_OFFLOAD, len);
729 SVCMAP(WMI_10_4_SERVICE_CHATTER,
730 WMI_SERVICE_CHATTER, len);
731 SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID,
732 WMI_SERVICE_COEX_FREQAVOID, len);
733 SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE,
734 WMI_SERVICE_PACKET_POWER_SAVE, len);
735 SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG,
736 WMI_SERVICE_FORCE_FW_HANG, len);
737 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
738 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
739 SVCMAP(WMI_10_4_SERVICE_GPIO,
740 WMI_SERVICE_GPIO, len);
741 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
742 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
743 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
744 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
745 SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE,
746 WMI_SERVICE_STA_KEEP_ALIVE, len);
747 SVCMAP(WMI_10_4_SERVICE_TX_ENCAP,
748 WMI_SERVICE_TX_ENCAP, len);
749 SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
750 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len);
751 SVCMAP(WMI_10_4_SERVICE_EARLY_RX,
752 WMI_SERVICE_EARLY_RX, len);
753 SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
754 WMI_SERVICE_ENHANCED_PROXY_STA, len);
755 SVCMAP(WMI_10_4_SERVICE_TT,
756 WMI_SERVICE_TT, len);
757 SVCMAP(WMI_10_4_SERVICE_ATF,
758 WMI_SERVICE_ATF, len);
759 SVCMAP(WMI_10_4_SERVICE_PEER_CACHING,
760 WMI_SERVICE_PEER_CACHING, len);
761 SVCMAP(WMI_10_4_SERVICE_COEX_GPIO,
762 WMI_SERVICE_COEX_GPIO, len);
763 SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
764 WMI_SERVICE_AUX_SPECTRAL_INTF, len);
765 SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
766 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
767 SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
768 WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
769 SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
770 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
771 SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,
772 WMI_SERVICE_MESH_NON_11S, len);
773 SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
774 WMI_SERVICE_RESTRT_CHNL_SUPPORT, len);
775 SVCMAP(WMI_10_4_SERVICE_PEER_STATS,
776 WMI_SERVICE_PEER_STATS, len);
777 SVCMAP(WMI_10_4_SERVICE_MESH_11S,
778 WMI_SERVICE_MESH_11S, len);
779 SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
780 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len);
781 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
782 WMI_SERVICE_TX_MODE_PUSH_ONLY, len);
783 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
784 WMI_SERVICE_TX_MODE_PUSH_PULL, len);
785 SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
786 WMI_SERVICE_TX_MODE_DYNAMIC, len);
787 SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER,
788 WMI_SERVICE_VDEV_RX_FILTER, len);
789 SVCMAP(WMI_10_4_SERVICE_BTCOEX,
790 WMI_SERVICE_BTCOEX, len);
791 SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION,
792 WMI_SERVICE_CHECK_CAL_VERSION, len);
793 SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2,
794 WMI_SERVICE_DBGLOG_WARN2, len);
795 SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
796 WMI_SERVICE_BTCOEX_DUTY_CYCLE, len);
797 SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
798 WMI_SERVICE_4_WIRE_COEX_SUPPORT, len);
799 SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
800 WMI_SERVICE_EXTENDED_NSS_SUPPORT, len);
801 SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
802 WMI_SERVICE_PROG_GPIO_BAND_SELECT, len);
803 SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
804 WMI_SERVICE_SMART_LOGGING_SUPPORT, len);
805 SVCMAP(WMI_10_4_SERVICE_TDLS,
806 WMI_SERVICE_TDLS, len);
807 SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN,
808 WMI_SERVICE_TDLS_OFFCHAN, len);
809 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
810 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len);
811 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
812 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len);
813 SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
814 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len);
815 SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
816 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len);
817 SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
818 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len);
819 SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
820 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
821 SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
822 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len);
823 SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL,
824 WMI_SERVICE_TPC_STATS_FINAL, len);
825 SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
826 WMI_SERVICE_TX_DATA_ACK_RSSI, len);
827 SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
828 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len);
829 SVCMAP(WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
830 WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, len);
831 SVCMAP(WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
832 WMI_SERVICE_RTT_RESPONDER_ROLE, len);
833 SVCMAP(WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
834 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
835 SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME,
836 WMI_SERVICE_REPORT_AIRTIME, len);
837 SVCMAP(WMI_10_4_SERVICE_TX_PWR_PER_PEER,
838 WMI_SERVICE_TX_PWR_PER_PEER, len);
839 SVCMAP(WMI_10_4_SERVICE_RESET_CHIP,
840 WMI_SERVICE_RESET_CHIP, len);
841 SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
842 WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
843 SVCMAP(WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
844 WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
845 }
846
847 #undef SVCMAP
848
849 /* 2 word representation of MAC addr */
850 struct wmi_mac_addr {
851 union {
852 u8 addr[6];
853 struct {
854 u32 word0;
855 u32 word1;
856 } __packed;
857 } __packed;
858 } __packed;
859
860 struct wmi_cmd_map {
861 u32 init_cmdid;
862 u32 start_scan_cmdid;
863 u32 stop_scan_cmdid;
864 u32 scan_chan_list_cmdid;
865 u32 scan_sch_prio_tbl_cmdid;
866 u32 scan_prob_req_oui_cmdid;
867 u32 pdev_set_regdomain_cmdid;
868 u32 pdev_set_channel_cmdid;
869 u32 pdev_set_param_cmdid;
870 u32 pdev_pktlog_enable_cmdid;
871 u32 pdev_pktlog_disable_cmdid;
872 u32 pdev_set_wmm_params_cmdid;
873 u32 pdev_set_ht_cap_ie_cmdid;
874 u32 pdev_set_vht_cap_ie_cmdid;
875 u32 pdev_set_dscp_tid_map_cmdid;
876 u32 pdev_set_quiet_mode_cmdid;
877 u32 pdev_green_ap_ps_enable_cmdid;
878 u32 pdev_get_tpc_config_cmdid;
879 u32 pdev_set_base_macaddr_cmdid;
880 u32 vdev_create_cmdid;
881 u32 vdev_delete_cmdid;
882 u32 vdev_start_request_cmdid;
883 u32 vdev_restart_request_cmdid;
884 u32 vdev_up_cmdid;
885 u32 vdev_stop_cmdid;
886 u32 vdev_down_cmdid;
887 u32 vdev_set_param_cmdid;
888 u32 vdev_install_key_cmdid;
889 u32 peer_create_cmdid;
890 u32 peer_delete_cmdid;
891 u32 peer_flush_tids_cmdid;
892 u32 peer_set_param_cmdid;
893 u32 peer_assoc_cmdid;
894 u32 peer_add_wds_entry_cmdid;
895 u32 peer_remove_wds_entry_cmdid;
896 u32 peer_mcast_group_cmdid;
897 u32 bcn_tx_cmdid;
898 u32 pdev_send_bcn_cmdid;
899 u32 bcn_tmpl_cmdid;
900 u32 bcn_filter_rx_cmdid;
901 u32 prb_req_filter_rx_cmdid;
902 u32 mgmt_tx_cmdid;
903 u32 mgmt_tx_send_cmdid;
904 u32 prb_tmpl_cmdid;
905 u32 addba_clear_resp_cmdid;
906 u32 addba_send_cmdid;
907 u32 addba_status_cmdid;
908 u32 delba_send_cmdid;
909 u32 addba_set_resp_cmdid;
910 u32 send_singleamsdu_cmdid;
911 u32 sta_powersave_mode_cmdid;
912 u32 sta_powersave_param_cmdid;
913 u32 sta_mimo_ps_mode_cmdid;
914 u32 pdev_dfs_enable_cmdid;
915 u32 pdev_dfs_disable_cmdid;
916 u32 roam_scan_mode;
917 u32 roam_scan_rssi_threshold;
918 u32 roam_scan_period;
919 u32 roam_scan_rssi_change_threshold;
920 u32 roam_ap_profile;
921 u32 ofl_scan_add_ap_profile;
922 u32 ofl_scan_remove_ap_profile;
923 u32 ofl_scan_period;
924 u32 p2p_dev_set_device_info;
925 u32 p2p_dev_set_discoverability;
926 u32 p2p_go_set_beacon_ie;
927 u32 p2p_go_set_probe_resp_ie;
928 u32 p2p_set_vendor_ie_data_cmdid;
929 u32 ap_ps_peer_param_cmdid;
930 u32 ap_ps_peer_uapsd_coex_cmdid;
931 u32 peer_rate_retry_sched_cmdid;
932 u32 wlan_profile_trigger_cmdid;
933 u32 wlan_profile_set_hist_intvl_cmdid;
934 u32 wlan_profile_get_profile_data_cmdid;
935 u32 wlan_profile_enable_profile_id_cmdid;
936 u32 wlan_profile_list_profile_id_cmdid;
937 u32 pdev_suspend_cmdid;
938 u32 pdev_resume_cmdid;
939 u32 add_bcn_filter_cmdid;
940 u32 rmv_bcn_filter_cmdid;
941 u32 wow_add_wake_pattern_cmdid;
942 u32 wow_del_wake_pattern_cmdid;
943 u32 wow_enable_disable_wake_event_cmdid;
944 u32 wow_enable_cmdid;
945 u32 wow_hostwakeup_from_sleep_cmdid;
946 u32 rtt_measreq_cmdid;
947 u32 rtt_tsf_cmdid;
948 u32 vdev_spectral_scan_configure_cmdid;
949 u32 vdev_spectral_scan_enable_cmdid;
950 u32 request_stats_cmdid;
951 u32 request_peer_stats_info_cmdid;
952 u32 set_arp_ns_offload_cmdid;
953 u32 network_list_offload_config_cmdid;
954 u32 gtk_offload_cmdid;
955 u32 csa_offload_enable_cmdid;
956 u32 csa_offload_chanswitch_cmdid;
957 u32 chatter_set_mode_cmdid;
958 u32 peer_tid_addba_cmdid;
959 u32 peer_tid_delba_cmdid;
960 u32 sta_dtim_ps_method_cmdid;
961 u32 sta_uapsd_auto_trig_cmdid;
962 u32 sta_keepalive_cmd;
963 u32 echo_cmdid;
964 u32 pdev_utf_cmdid;
965 u32 dbglog_cfg_cmdid;
966 u32 pdev_qvit_cmdid;
967 u32 pdev_ftm_intg_cmdid;
968 u32 vdev_set_keepalive_cmdid;
969 u32 vdev_get_keepalive_cmdid;
970 u32 force_fw_hang_cmdid;
971 u32 gpio_config_cmdid;
972 u32 gpio_output_cmdid;
973 u32 pdev_get_temperature_cmdid;
974 u32 vdev_set_wmm_params_cmdid;
975 u32 tdls_set_state_cmdid;
976 u32 tdls_peer_update_cmdid;
977 u32 adaptive_qcs_cmdid;
978 u32 scan_update_request_cmdid;
979 u32 vdev_standby_response_cmdid;
980 u32 vdev_resume_response_cmdid;
981 u32 wlan_peer_caching_add_peer_cmdid;
982 u32 wlan_peer_caching_evict_peer_cmdid;
983 u32 wlan_peer_caching_restore_peer_cmdid;
984 u32 wlan_peer_caching_print_all_peers_info_cmdid;
985 u32 peer_update_wds_entry_cmdid;
986 u32 peer_add_proxy_sta_entry_cmdid;
987 u32 rtt_keepalive_cmdid;
988 u32 oem_req_cmdid;
989 u32 nan_cmdid;
990 u32 vdev_ratemask_cmdid;
991 u32 qboost_cfg_cmdid;
992 u32 pdev_smart_ant_enable_cmdid;
993 u32 pdev_smart_ant_set_rx_antenna_cmdid;
994 u32 peer_smart_ant_set_tx_antenna_cmdid;
995 u32 peer_smart_ant_set_train_info_cmdid;
996 u32 peer_smart_ant_set_node_config_ops_cmdid;
997 u32 pdev_set_antenna_switch_table_cmdid;
998 u32 pdev_set_ctl_table_cmdid;
999 u32 pdev_set_mimogain_table_cmdid;
1000 u32 pdev_ratepwr_table_cmdid;
1001 u32 pdev_ratepwr_chainmsk_table_cmdid;
1002 u32 pdev_fips_cmdid;
1003 u32 tt_set_conf_cmdid;
1004 u32 fwtest_cmdid;
1005 u32 vdev_atf_request_cmdid;
1006 u32 peer_atf_request_cmdid;
1007 u32 pdev_get_ani_cck_config_cmdid;
1008 u32 pdev_get_ani_ofdm_config_cmdid;
1009 u32 pdev_reserve_ast_entry_cmdid;
1010 u32 pdev_get_nfcal_power_cmdid;
1011 u32 pdev_get_tpc_cmdid;
1012 u32 pdev_get_ast_info_cmdid;
1013 u32 vdev_set_dscp_tid_map_cmdid;
1014 u32 pdev_get_info_cmdid;
1015 u32 vdev_get_info_cmdid;
1016 u32 vdev_filter_neighbor_rx_packets_cmdid;
1017 u32 mu_cal_start_cmdid;
1018 u32 set_cca_params_cmdid;
1019 u32 pdev_bss_chan_info_request_cmdid;
1020 u32 pdev_enable_adaptive_cca_cmdid;
1021 u32 ext_resource_cfg_cmdid;
1022 u32 vdev_set_ie_cmdid;
1023 u32 set_lteu_config_cmdid;
1024 u32 atf_ssid_grouping_request_cmdid;
1025 u32 peer_atf_ext_request_cmdid;
1026 u32 set_periodic_channel_stats_cfg_cmdid;
1027 u32 peer_bwf_request_cmdid;
1028 u32 btcoex_cfg_cmdid;
1029 u32 peer_tx_mu_txmit_count_cmdid;
1030 u32 peer_tx_mu_txmit_rstcnt_cmdid;
1031 u32 peer_gid_userpos_list_cmdid;
1032 u32 pdev_check_cal_version_cmdid;
1033 u32 coex_version_cfg_cmid;
1034 u32 pdev_get_rx_filter_cmdid;
1035 u32 pdev_extended_nss_cfg_cmdid;
1036 u32 vdev_set_scan_nac_rssi_cmdid;
1037 u32 prog_gpio_band_select_cmdid;
1038 u32 config_smart_logging_cmdid;
1039 u32 debug_fatal_condition_cmdid;
1040 u32 get_tsf_timer_cmdid;
1041 u32 pdev_get_tpc_table_cmdid;
1042 u32 vdev_sifs_trigger_time_cmdid;
1043 u32 pdev_wds_entry_list_cmdid;
1044 u32 tdls_set_offchan_mode_cmdid;
1045 u32 radar_found_cmdid;
1046 u32 set_bb_timing_cmdid;
1047 u32 per_peer_per_tid_config_cmdid;
1048 };
1049
1050 /*
1051 * wmi command groups.
1052 */
1053 enum wmi_cmd_group {
1054 /* 0 to 2 are reserved */
1055 WMI_GRP_START = 0x3,
1056 WMI_GRP_SCAN = WMI_GRP_START,
1057 WMI_GRP_PDEV,
1058 WMI_GRP_VDEV,
1059 WMI_GRP_PEER,
1060 WMI_GRP_MGMT,
1061 WMI_GRP_BA_NEG,
1062 WMI_GRP_STA_PS,
1063 WMI_GRP_DFS,
1064 WMI_GRP_ROAM,
1065 WMI_GRP_OFL_SCAN,
1066 WMI_GRP_P2P,
1067 WMI_GRP_AP_PS,
1068 WMI_GRP_RATE_CTRL,
1069 WMI_GRP_PROFILE,
1070 WMI_GRP_SUSPEND,
1071 WMI_GRP_BCN_FILTER,
1072 WMI_GRP_WOW,
1073 WMI_GRP_RTT,
1074 WMI_GRP_SPECTRAL,
1075 WMI_GRP_STATS,
1076 WMI_GRP_ARP_NS_OFL,
1077 WMI_GRP_NLO_OFL,
1078 WMI_GRP_GTK_OFL,
1079 WMI_GRP_CSA_OFL,
1080 WMI_GRP_CHATTER,
1081 WMI_GRP_TID_ADDBA,
1082 WMI_GRP_MISC,
1083 WMI_GRP_GPIO,
1084 };
1085
1086 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
1087 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
1088
1089 #define WMI_CMD_UNSUPPORTED 0
1090
1091 /* Command IDs and command events for MAIN FW. */
1092 enum wmi_cmd_id {
1093 WMI_INIT_CMDID = 0x1,
1094
1095 /* Scan specific commands */
1096 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN),
1097 WMI_STOP_SCAN_CMDID,
1098 WMI_SCAN_CHAN_LIST_CMDID,
1099 WMI_SCAN_SCH_PRIO_TBL_CMDID,
1100
1101 /* PDEV (physical device) specific commands */
1102 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV),
1103 WMI_PDEV_SET_CHANNEL_CMDID,
1104 WMI_PDEV_SET_PARAM_CMDID,
1105 WMI_PDEV_PKTLOG_ENABLE_CMDID,
1106 WMI_PDEV_PKTLOG_DISABLE_CMDID,
1107 WMI_PDEV_SET_WMM_PARAMS_CMDID,
1108 WMI_PDEV_SET_HT_CAP_IE_CMDID,
1109 WMI_PDEV_SET_VHT_CAP_IE_CMDID,
1110 WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
1111 WMI_PDEV_SET_QUIET_MODE_CMDID,
1112 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1113 WMI_PDEV_GET_TPC_CONFIG_CMDID,
1114 WMI_PDEV_SET_BASE_MACADDR_CMDID,
1115
1116 /* VDEV (virtual device) specific commands */
1117 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV),
1118 WMI_VDEV_DELETE_CMDID,
1119 WMI_VDEV_START_REQUEST_CMDID,
1120 WMI_VDEV_RESTART_REQUEST_CMDID,
1121 WMI_VDEV_UP_CMDID,
1122 WMI_VDEV_STOP_CMDID,
1123 WMI_VDEV_DOWN_CMDID,
1124 WMI_VDEV_SET_PARAM_CMDID,
1125 WMI_VDEV_INSTALL_KEY_CMDID,
1126
1127 /* peer specific commands */
1128 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER),
1129 WMI_PEER_DELETE_CMDID,
1130 WMI_PEER_FLUSH_TIDS_CMDID,
1131 WMI_PEER_SET_PARAM_CMDID,
1132 WMI_PEER_ASSOC_CMDID,
1133 WMI_PEER_ADD_WDS_ENTRY_CMDID,
1134 WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
1135 WMI_PEER_MCAST_GROUP_CMDID,
1136
1137 /* beacon/management specific commands */
1138 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT),
1139 WMI_PDEV_SEND_BCN_CMDID,
1140 WMI_BCN_TMPL_CMDID,
1141 WMI_BCN_FILTER_RX_CMDID,
1142 WMI_PRB_REQ_FILTER_RX_CMDID,
1143 WMI_MGMT_TX_CMDID,
1144 WMI_PRB_TMPL_CMDID,
1145
1146 /* commands to directly control BA negotiation directly from host. */
1147 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG),
1148 WMI_ADDBA_SEND_CMDID,
1149 WMI_ADDBA_STATUS_CMDID,
1150 WMI_DELBA_SEND_CMDID,
1151 WMI_ADDBA_SET_RESP_CMDID,
1152 WMI_SEND_SINGLEAMSDU_CMDID,
1153
1154 /* Station power save specific config */
1155 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS),
1156 WMI_STA_POWERSAVE_PARAM_CMDID,
1157 WMI_STA_MIMO_PS_MODE_CMDID,
1158
1159 /** DFS-specific commands */
1160 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS),
1161 WMI_PDEV_DFS_DISABLE_CMDID,
1162
1163 /* Roaming specific commands */
1164 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM),
1165 WMI_ROAM_SCAN_RSSI_THRESHOLD,
1166 WMI_ROAM_SCAN_PERIOD,
1167 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1168 WMI_ROAM_AP_PROFILE,
1169
1170 /* offload scan specific commands */
1171 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN),
1172 WMI_OFL_SCAN_REMOVE_AP_PROFILE,
1173 WMI_OFL_SCAN_PERIOD,
1174
1175 /* P2P specific commands */
1176 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P),
1177 WMI_P2P_DEV_SET_DISCOVERABILITY,
1178 WMI_P2P_GO_SET_BEACON_IE,
1179 WMI_P2P_GO_SET_PROBE_RESP_IE,
1180 WMI_P2P_SET_VENDOR_IE_DATA_CMDID,
1181
1182 /* AP power save specific config */
1183 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS),
1184 WMI_AP_PS_PEER_UAPSD_COEX_CMDID,
1185
1186 /* Rate-control specific commands */
1187 WMI_PEER_RATE_RETRY_SCHED_CMDID =
1188 WMI_CMD_GRP(WMI_GRP_RATE_CTRL),
1189
1190 /* WLAN Profiling commands. */
1191 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE),
1192 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1193 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1194 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1195 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1196
1197 /* Suspend resume command Ids */
1198 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND),
1199 WMI_PDEV_RESUME_CMDID,
1200
1201 /* Beacon filter commands */
1202 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER),
1203 WMI_RMV_BCN_FILTER_CMDID,
1204
1205 /* WOW Specific WMI commands*/
1206 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW),
1207 WMI_WOW_DEL_WAKE_PATTERN_CMDID,
1208 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1209 WMI_WOW_ENABLE_CMDID,
1210 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1211
1212 /* RTT measurement related cmd */
1213 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT),
1214 WMI_RTT_TSF_CMDID,
1215
1216 /* spectral scan commands */
1217 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL),
1218 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1219
1220 /* F/W stats */
1221 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS),
1222
1223 /* ARP OFFLOAD REQUEST*/
1224 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL),
1225
1226 /* NS offload confid*/
1227 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL),
1228
1229 /* GTK offload Specific WMI commands*/
1230 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL),
1231
1232 /* CSA offload Specific WMI commands*/
1233 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL),
1234 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,
1235
1236 /* Chatter commands*/
1237 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER),
1238
1239 /* addba specific commands */
1240 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA),
1241 WMI_PEER_TID_DELBA_CMDID,
1242
1243 /* set station mimo powersave method */
1244 WMI_STA_DTIM_PS_METHOD_CMDID,
1245 /* Configure the Station UAPSD AC Auto Trigger Parameters */
1246 WMI_STA_UAPSD_AUTO_TRIG_CMDID,
1247
1248 /* STA Keep alive parameter configuration,
1249 * Requires WMI_SERVICE_STA_KEEP_ALIVE
1250 */
1251 WMI_STA_KEEPALIVE_CMD,
1252
1253 /* misc command group */
1254 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC),
1255 WMI_PDEV_UTF_CMDID,
1256 WMI_DBGLOG_CFG_CMDID,
1257 WMI_PDEV_QVIT_CMDID,
1258 WMI_PDEV_FTM_INTG_CMDID,
1259 WMI_VDEV_SET_KEEPALIVE_CMDID,
1260 WMI_VDEV_GET_KEEPALIVE_CMDID,
1261 WMI_FORCE_FW_HANG_CMDID,
1262
1263 /* GPIO Configuration */
1264 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO),
1265 WMI_GPIO_OUTPUT_CMDID,
1266 };
1267
1268 enum wmi_event_id {
1269 WMI_SERVICE_READY_EVENTID = 0x1,
1270 WMI_READY_EVENTID,
1271 WMI_SERVICE_AVAILABLE_EVENTID,
1272
1273 /* Scan specific events */
1274 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN),
1275
1276 /* PDEV specific events */
1277 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV),
1278 WMI_CHAN_INFO_EVENTID,
1279 WMI_PHYERR_EVENTID,
1280
1281 /* VDEV specific events */
1282 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
1283 WMI_VDEV_STOPPED_EVENTID,
1284 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,
1285
1286 /* peer specific events */
1287 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER),
1288
1289 /* beacon/mgmt specific events */
1290 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),
1291 WMI_HOST_SWBA_EVENTID,
1292 WMI_TBTTOFFSET_UPDATE_EVENTID,
1293
1294 /* ADDBA Related WMI Events*/
1295 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG),
1296 WMI_TX_ADDBA_COMPLETE_EVENTID,
1297
1298 /* Roam event to trigger roaming on host */
1299 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM),
1300 WMI_PROFILE_MATCH,
1301
1302 /* WoW */
1303 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW),
1304
1305 /* RTT */
1306 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT),
1307 WMI_TSF_MEASUREMENT_REPORT_EVENTID,
1308 WMI_RTT_ERROR_REPORT_EVENTID,
1309
1310 /* GTK offload */
1311 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL),
1312 WMI_GTK_REKEY_FAIL_EVENTID,
1313
1314 /* CSA IE received event */
1315 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL),
1316
1317 /* Misc events */
1318 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC),
1319 WMI_PDEV_UTF_EVENTID,
1320 WMI_DEBUG_MESG_EVENTID,
1321 WMI_UPDATE_STATS_EVENTID,
1322 WMI_DEBUG_PRINT_EVENTID,
1323 WMI_DCS_INTERFERENCE_EVENTID,
1324 WMI_PDEV_QVIT_EVENTID,
1325 WMI_WLAN_PROFILE_DATA_EVENTID,
1326 WMI_PDEV_FTM_INTG_EVENTID,
1327 WMI_WLAN_FREQ_AVOID_EVENTID,
1328 WMI_VDEV_GET_KEEPALIVE_EVENTID,
1329
1330 /* GPIO Event */
1331 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
1332 };
1333
1334 /* Command IDs and command events for 10.X firmware */
1335 enum wmi_10x_cmd_id {
1336 WMI_10X_START_CMDID = 0x9000,
1337 WMI_10X_END_CMDID = 0x9FFF,
1338
1339 /* initialize the wlan sub system */
1340 WMI_10X_INIT_CMDID,
1341
1342 /* Scan specific commands */
1343
1344 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,
1345 WMI_10X_STOP_SCAN_CMDID,
1346 WMI_10X_SCAN_CHAN_LIST_CMDID,
1347 WMI_10X_ECHO_CMDID,
1348
1349 /* PDEV(physical device) specific commands */
1350 WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
1351 WMI_10X_PDEV_SET_CHANNEL_CMDID,
1352 WMI_10X_PDEV_SET_PARAM_CMDID,
1353 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
1354 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
1355 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
1356 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
1357 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
1358 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
1359 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
1360 WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
1361 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1362 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
1363
1364 /* VDEV(virtual device) specific commands */
1365 WMI_10X_VDEV_CREATE_CMDID,
1366 WMI_10X_VDEV_DELETE_CMDID,
1367 WMI_10X_VDEV_START_REQUEST_CMDID,
1368 WMI_10X_VDEV_RESTART_REQUEST_CMDID,
1369 WMI_10X_VDEV_UP_CMDID,
1370 WMI_10X_VDEV_STOP_CMDID,
1371 WMI_10X_VDEV_DOWN_CMDID,
1372 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
1373 WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
1374 WMI_10X_VDEV_SET_PARAM_CMDID,
1375 WMI_10X_VDEV_INSTALL_KEY_CMDID,
1376
1377 /* peer specific commands */
1378 WMI_10X_PEER_CREATE_CMDID,
1379 WMI_10X_PEER_DELETE_CMDID,
1380 WMI_10X_PEER_FLUSH_TIDS_CMDID,
1381 WMI_10X_PEER_SET_PARAM_CMDID,
1382 WMI_10X_PEER_ASSOC_CMDID,
1383 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
1384 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
1385 WMI_10X_PEER_MCAST_GROUP_CMDID,
1386
1387 /* beacon/management specific commands */
1388
1389 WMI_10X_BCN_TX_CMDID,
1390 WMI_10X_BCN_PRB_TMPL_CMDID,
1391 WMI_10X_BCN_FILTER_RX_CMDID,
1392 WMI_10X_PRB_REQ_FILTER_RX_CMDID,
1393 WMI_10X_MGMT_TX_CMDID,
1394
1395 /* commands to directly control ba negotiation directly from host. */
1396 WMI_10X_ADDBA_CLEAR_RESP_CMDID,
1397 WMI_10X_ADDBA_SEND_CMDID,
1398 WMI_10X_ADDBA_STATUS_CMDID,
1399 WMI_10X_DELBA_SEND_CMDID,
1400 WMI_10X_ADDBA_SET_RESP_CMDID,
1401 WMI_10X_SEND_SINGLEAMSDU_CMDID,
1402
1403 /* Station power save specific config */
1404 WMI_10X_STA_POWERSAVE_MODE_CMDID,
1405 WMI_10X_STA_POWERSAVE_PARAM_CMDID,
1406 WMI_10X_STA_MIMO_PS_MODE_CMDID,
1407
1408 /* set debug log config */
1409 WMI_10X_DBGLOG_CFG_CMDID,
1410
1411 /* DFS-specific commands */
1412 WMI_10X_PDEV_DFS_ENABLE_CMDID,
1413 WMI_10X_PDEV_DFS_DISABLE_CMDID,
1414
1415 /* QVIT specific command id */
1416 WMI_10X_PDEV_QVIT_CMDID,
1417
1418 /* Offload Scan and Roaming related commands */
1419 WMI_10X_ROAM_SCAN_MODE,
1420 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
1421 WMI_10X_ROAM_SCAN_PERIOD,
1422 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1423 WMI_10X_ROAM_AP_PROFILE,
1424 WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
1425 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
1426 WMI_10X_OFL_SCAN_PERIOD,
1427
1428 /* P2P specific commands */
1429 WMI_10X_P2P_DEV_SET_DEVICE_INFO,
1430 WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
1431 WMI_10X_P2P_GO_SET_BEACON_IE,
1432 WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
1433
1434 /* AP power save specific config */
1435 WMI_10X_AP_PS_PEER_PARAM_CMDID,
1436 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,
1437
1438 /* Rate-control specific commands */
1439 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
1440
1441 /* WLAN Profiling commands. */
1442 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
1443 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1444 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1445 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1446 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1447
1448 /* Suspend resume command Ids */
1449 WMI_10X_PDEV_SUSPEND_CMDID,
1450 WMI_10X_PDEV_RESUME_CMDID,
1451
1452 /* Beacon filter commands */
1453 WMI_10X_ADD_BCN_FILTER_CMDID,
1454 WMI_10X_RMV_BCN_FILTER_CMDID,
1455
1456 /* WOW Specific WMI commands*/
1457 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
1458 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
1459 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1460 WMI_10X_WOW_ENABLE_CMDID,
1461 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1462
1463 /* RTT measurement related cmd */
1464 WMI_10X_RTT_MEASREQ_CMDID,
1465 WMI_10X_RTT_TSF_CMDID,
1466
1467 /* transmit beacon by value */
1468 WMI_10X_PDEV_SEND_BCN_CMDID,
1469
1470 /* F/W stats */
1471 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1472 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1473 WMI_10X_REQUEST_STATS_CMDID,
1474
1475 /* GPIO Configuration */
1476 WMI_10X_GPIO_CONFIG_CMDID,
1477 WMI_10X_GPIO_OUTPUT_CMDID,
1478
1479 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,
1480 };
1481
1482 enum wmi_10x_event_id {
1483 WMI_10X_SERVICE_READY_EVENTID = 0x8000,
1484 WMI_10X_READY_EVENTID,
1485 WMI_10X_START_EVENTID = 0x9000,
1486 WMI_10X_END_EVENTID = 0x9FFF,
1487
1488 /* Scan specific events */
1489 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,
1490 WMI_10X_ECHO_EVENTID,
1491 WMI_10X_DEBUG_MESG_EVENTID,
1492 WMI_10X_UPDATE_STATS_EVENTID,
1493
1494 /* Instantaneous RSSI event */
1495 WMI_10X_INST_RSSI_STATS_EVENTID,
1496
1497 /* VDEV specific events */
1498 WMI_10X_VDEV_START_RESP_EVENTID,
1499 WMI_10X_VDEV_STANDBY_REQ_EVENTID,
1500 WMI_10X_VDEV_RESUME_REQ_EVENTID,
1501 WMI_10X_VDEV_STOPPED_EVENTID,
1502
1503 /* peer specific events */
1504 WMI_10X_PEER_STA_KICKOUT_EVENTID,
1505
1506 /* beacon/mgmt specific events */
1507 WMI_10X_HOST_SWBA_EVENTID,
1508 WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
1509 WMI_10X_MGMT_RX_EVENTID,
1510
1511 /* Channel stats event */
1512 WMI_10X_CHAN_INFO_EVENTID,
1513
1514 /* PHY Error specific WMI event */
1515 WMI_10X_PHYERR_EVENTID,
1516
1517 /* Roam event to trigger roaming on host */
1518 WMI_10X_ROAM_EVENTID,
1519
1520 /* matching AP found from list of profiles */
1521 WMI_10X_PROFILE_MATCH,
1522
1523 /* debug print message used for tracing FW code while debugging */
1524 WMI_10X_DEBUG_PRINT_EVENTID,
1525 /* VI spoecific event */
1526 WMI_10X_PDEV_QVIT_EVENTID,
1527 /* FW code profile data in response to profile request */
1528 WMI_10X_WLAN_PROFILE_DATA_EVENTID,
1529
1530 /*RTT related event ID*/
1531 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
1532 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
1533 WMI_10X_RTT_ERROR_REPORT_EVENTID,
1534
1535 WMI_10X_WOW_WAKEUP_HOST_EVENTID,
1536 WMI_10X_DCS_INTERFERENCE_EVENTID,
1537
1538 /* TPC config for the current operating channel */
1539 WMI_10X_PDEV_TPC_CONFIG_EVENTID,
1540
1541 WMI_10X_GPIO_INPUT_EVENTID,
1542 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1,
1543 };
1544
1545 enum wmi_10_2_cmd_id {
1546 WMI_10_2_START_CMDID = 0x9000,
1547 WMI_10_2_END_CMDID = 0x9FFF,
1548 WMI_10_2_INIT_CMDID,
1549 WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID,
1550 WMI_10_2_STOP_SCAN_CMDID,
1551 WMI_10_2_SCAN_CHAN_LIST_CMDID,
1552 WMI_10_2_ECHO_CMDID,
1553 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
1554 WMI_10_2_PDEV_SET_CHANNEL_CMDID,
1555 WMI_10_2_PDEV_SET_PARAM_CMDID,
1556 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID,
1557 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID,
1558 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID,
1559 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID,
1560 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID,
1561 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID,
1562 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID,
1563 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1564 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID,
1565 WMI_10_2_VDEV_CREATE_CMDID,
1566 WMI_10_2_VDEV_DELETE_CMDID,
1567 WMI_10_2_VDEV_START_REQUEST_CMDID,
1568 WMI_10_2_VDEV_RESTART_REQUEST_CMDID,
1569 WMI_10_2_VDEV_UP_CMDID,
1570 WMI_10_2_VDEV_STOP_CMDID,
1571 WMI_10_2_VDEV_DOWN_CMDID,
1572 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID,
1573 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID,
1574 WMI_10_2_VDEV_SET_PARAM_CMDID,
1575 WMI_10_2_VDEV_INSTALL_KEY_CMDID,
1576 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID,
1577 WMI_10_2_PEER_CREATE_CMDID,
1578 WMI_10_2_PEER_DELETE_CMDID,
1579 WMI_10_2_PEER_FLUSH_TIDS_CMDID,
1580 WMI_10_2_PEER_SET_PARAM_CMDID,
1581 WMI_10_2_PEER_ASSOC_CMDID,
1582 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID,
1583 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID,
1584 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID,
1585 WMI_10_2_PEER_MCAST_GROUP_CMDID,
1586 WMI_10_2_BCN_TX_CMDID,
1587 WMI_10_2_BCN_PRB_TMPL_CMDID,
1588 WMI_10_2_BCN_FILTER_RX_CMDID,
1589 WMI_10_2_PRB_REQ_FILTER_RX_CMDID,
1590 WMI_10_2_MGMT_TX_CMDID,
1591 WMI_10_2_ADDBA_CLEAR_RESP_CMDID,
1592 WMI_10_2_ADDBA_SEND_CMDID,
1593 WMI_10_2_ADDBA_STATUS_CMDID,
1594 WMI_10_2_DELBA_SEND_CMDID,
1595 WMI_10_2_ADDBA_SET_RESP_CMDID,
1596 WMI_10_2_SEND_SINGLEAMSDU_CMDID,
1597 WMI_10_2_STA_POWERSAVE_MODE_CMDID,
1598 WMI_10_2_STA_POWERSAVE_PARAM_CMDID,
1599 WMI_10_2_STA_MIMO_PS_MODE_CMDID,
1600 WMI_10_2_DBGLOG_CFG_CMDID,
1601 WMI_10_2_PDEV_DFS_ENABLE_CMDID,
1602 WMI_10_2_PDEV_DFS_DISABLE_CMDID,
1603 WMI_10_2_PDEV_QVIT_CMDID,
1604 WMI_10_2_ROAM_SCAN_MODE,
1605 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD,
1606 WMI_10_2_ROAM_SCAN_PERIOD,
1607 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1608 WMI_10_2_ROAM_AP_PROFILE,
1609 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE,
1610 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE,
1611 WMI_10_2_OFL_SCAN_PERIOD,
1612 WMI_10_2_P2P_DEV_SET_DEVICE_INFO,
1613 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY,
1614 WMI_10_2_P2P_GO_SET_BEACON_IE,
1615 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE,
1616 WMI_10_2_AP_PS_PEER_PARAM_CMDID,
1617 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID,
1618 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID,
1619 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID,
1620 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1621 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1622 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1623 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1624 WMI_10_2_PDEV_SUSPEND_CMDID,
1625 WMI_10_2_PDEV_RESUME_CMDID,
1626 WMI_10_2_ADD_BCN_FILTER_CMDID,
1627 WMI_10_2_RMV_BCN_FILTER_CMDID,
1628 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID,
1629 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID,
1630 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1631 WMI_10_2_WOW_ENABLE_CMDID,
1632 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1633 WMI_10_2_RTT_MEASREQ_CMDID,
1634 WMI_10_2_RTT_TSF_CMDID,
1635 WMI_10_2_RTT_KEEPALIVE_CMDID,
1636 WMI_10_2_PDEV_SEND_BCN_CMDID,
1637 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1638 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1639 WMI_10_2_REQUEST_STATS_CMDID,
1640 WMI_10_2_GPIO_CONFIG_CMDID,
1641 WMI_10_2_GPIO_OUTPUT_CMDID,
1642 WMI_10_2_VDEV_RATEMASK_CMDID,
1643 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID,
1644 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1645 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1646 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1647 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1648 WMI_10_2_FORCE_FW_HANG_CMDID,
1649 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1650 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID,
1651 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1652 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
1653 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1654 WMI_10_2_PDEV_GET_INFO,
1655 WMI_10_2_VDEV_GET_INFO,
1656 WMI_10_2_VDEV_ATF_REQUEST_CMDID,
1657 WMI_10_2_PEER_ATF_REQUEST_CMDID,
1658 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
1659 WMI_10_2_MU_CAL_START_CMDID,
1660 WMI_10_2_SET_LTEU_CONFIG_CMDID,
1661 WMI_10_2_SET_CCA_PARAMS,
1662 WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1663 WMI_10_2_FWTEST_CMDID,
1664 WMI_10_2_PDEV_SET_BB_TIMING_CONFIG_CMDID,
1665 WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
1666 };
1667
1668 enum wmi_10_2_event_id {
1669 WMI_10_2_SERVICE_READY_EVENTID = 0x8000,
1670 WMI_10_2_READY_EVENTID,
1671 WMI_10_2_DEBUG_MESG_EVENTID,
1672 WMI_10_2_START_EVENTID = 0x9000,
1673 WMI_10_2_END_EVENTID = 0x9FFF,
1674 WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID,
1675 WMI_10_2_ECHO_EVENTID,
1676 WMI_10_2_UPDATE_STATS_EVENTID,
1677 WMI_10_2_INST_RSSI_STATS_EVENTID,
1678 WMI_10_2_VDEV_START_RESP_EVENTID,
1679 WMI_10_2_VDEV_STANDBY_REQ_EVENTID,
1680 WMI_10_2_VDEV_RESUME_REQ_EVENTID,
1681 WMI_10_2_VDEV_STOPPED_EVENTID,
1682 WMI_10_2_PEER_STA_KICKOUT_EVENTID,
1683 WMI_10_2_HOST_SWBA_EVENTID,
1684 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID,
1685 WMI_10_2_MGMT_RX_EVENTID,
1686 WMI_10_2_CHAN_INFO_EVENTID,
1687 WMI_10_2_PHYERR_EVENTID,
1688 WMI_10_2_ROAM_EVENTID,
1689 WMI_10_2_PROFILE_MATCH,
1690 WMI_10_2_DEBUG_PRINT_EVENTID,
1691 WMI_10_2_PDEV_QVIT_EVENTID,
1692 WMI_10_2_WLAN_PROFILE_DATA_EVENTID,
1693 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID,
1694 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID,
1695 WMI_10_2_RTT_ERROR_REPORT_EVENTID,
1696 WMI_10_2_RTT_KEEPALIVE_EVENTID,
1697 WMI_10_2_WOW_WAKEUP_HOST_EVENTID,
1698 WMI_10_2_DCS_INTERFERENCE_EVENTID,
1699 WMI_10_2_PDEV_TPC_CONFIG_EVENTID,
1700 WMI_10_2_GPIO_INPUT_EVENTID,
1701 WMI_10_2_PEER_RATECODE_LIST_EVENTID,
1702 WMI_10_2_GENERIC_BUFFER_EVENTID,
1703 WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
1704 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
1705 WMI_10_2_WDS_PEER_EVENTID,
1706 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
1707 WMI_10_2_PDEV_TEMPERATURE_EVENTID,
1708 WMI_10_2_MU_REPORT_EVENTID,
1709 WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID,
1710 WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
1711 };
1712
1713 enum wmi_10_4_cmd_id {
1714 WMI_10_4_START_CMDID = 0x9000,
1715 WMI_10_4_END_CMDID = 0x9FFF,
1716 WMI_10_4_INIT_CMDID,
1717 WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID,
1718 WMI_10_4_STOP_SCAN_CMDID,
1719 WMI_10_4_SCAN_CHAN_LIST_CMDID,
1720 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
1721 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID,
1722 WMI_10_4_ECHO_CMDID,
1723 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
1724 WMI_10_4_PDEV_SET_CHANNEL_CMDID,
1725 WMI_10_4_PDEV_SET_PARAM_CMDID,
1726 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID,
1727 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID,
1728 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID,
1729 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID,
1730 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID,
1731 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID,
1732 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID,
1733 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID,
1734 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1735 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID,
1736 WMI_10_4_VDEV_CREATE_CMDID,
1737 WMI_10_4_VDEV_DELETE_CMDID,
1738 WMI_10_4_VDEV_START_REQUEST_CMDID,
1739 WMI_10_4_VDEV_RESTART_REQUEST_CMDID,
1740 WMI_10_4_VDEV_UP_CMDID,
1741 WMI_10_4_VDEV_STOP_CMDID,
1742 WMI_10_4_VDEV_DOWN_CMDID,
1743 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID,
1744 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID,
1745 WMI_10_4_VDEV_SET_PARAM_CMDID,
1746 WMI_10_4_VDEV_INSTALL_KEY_CMDID,
1747 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID,
1748 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID,
1749 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID,
1750 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID,
1751 WMI_10_4_PEER_CREATE_CMDID,
1752 WMI_10_4_PEER_DELETE_CMDID,
1753 WMI_10_4_PEER_FLUSH_TIDS_CMDID,
1754 WMI_10_4_PEER_SET_PARAM_CMDID,
1755 WMI_10_4_PEER_ASSOC_CMDID,
1756 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID,
1757 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID,
1758 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID,
1759 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID,
1760 WMI_10_4_PEER_MCAST_GROUP_CMDID,
1761 WMI_10_4_BCN_TX_CMDID,
1762 WMI_10_4_PDEV_SEND_BCN_CMDID,
1763 WMI_10_4_BCN_PRB_TMPL_CMDID,
1764 WMI_10_4_BCN_FILTER_RX_CMDID,
1765 WMI_10_4_PRB_REQ_FILTER_RX_CMDID,
1766 WMI_10_4_MGMT_TX_CMDID,
1767 WMI_10_4_PRB_TMPL_CMDID,
1768 WMI_10_4_ADDBA_CLEAR_RESP_CMDID,
1769 WMI_10_4_ADDBA_SEND_CMDID,
1770 WMI_10_4_ADDBA_STATUS_CMDID,
1771 WMI_10_4_DELBA_SEND_CMDID,
1772 WMI_10_4_ADDBA_SET_RESP_CMDID,
1773 WMI_10_4_SEND_SINGLEAMSDU_CMDID,
1774 WMI_10_4_STA_POWERSAVE_MODE_CMDID,
1775 WMI_10_4_STA_POWERSAVE_PARAM_CMDID,
1776 WMI_10_4_STA_MIMO_PS_MODE_CMDID,
1777 WMI_10_4_DBGLOG_CFG_CMDID,
1778 WMI_10_4_PDEV_DFS_ENABLE_CMDID,
1779 WMI_10_4_PDEV_DFS_DISABLE_CMDID,
1780 WMI_10_4_PDEV_QVIT_CMDID,
1781 WMI_10_4_ROAM_SCAN_MODE,
1782 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD,
1783 WMI_10_4_ROAM_SCAN_PERIOD,
1784 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1785 WMI_10_4_ROAM_AP_PROFILE,
1786 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE,
1787 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE,
1788 WMI_10_4_OFL_SCAN_PERIOD,
1789 WMI_10_4_P2P_DEV_SET_DEVICE_INFO,
1790 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY,
1791 WMI_10_4_P2P_GO_SET_BEACON_IE,
1792 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE,
1793 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID,
1794 WMI_10_4_AP_PS_PEER_PARAM_CMDID,
1795 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID,
1796 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID,
1797 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID,
1798 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1799 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1800 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1801 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1802 WMI_10_4_PDEV_SUSPEND_CMDID,
1803 WMI_10_4_PDEV_RESUME_CMDID,
1804 WMI_10_4_ADD_BCN_FILTER_CMDID,
1805 WMI_10_4_RMV_BCN_FILTER_CMDID,
1806 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID,
1807 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID,
1808 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1809 WMI_10_4_WOW_ENABLE_CMDID,
1810 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1811 WMI_10_4_RTT_MEASREQ_CMDID,
1812 WMI_10_4_RTT_TSF_CMDID,
1813 WMI_10_4_RTT_KEEPALIVE_CMDID,
1814 WMI_10_4_OEM_REQ_CMDID,
1815 WMI_10_4_NAN_CMDID,
1816 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1817 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1818 WMI_10_4_REQUEST_STATS_CMDID,
1819 WMI_10_4_GPIO_CONFIG_CMDID,
1820 WMI_10_4_GPIO_OUTPUT_CMDID,
1821 WMI_10_4_VDEV_RATEMASK_CMDID,
1822 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID,
1823 WMI_10_4_GTK_OFFLOAD_CMDID,
1824 WMI_10_4_QBOOST_CFG_CMDID,
1825 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID,
1826 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID,
1827 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1828 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1829 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1830 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1831 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID,
1832 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID,
1833 WMI_10_4_FORCE_FW_HANG_CMDID,
1834 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1835 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID,
1836 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1837 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID,
1838 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1839 WMI_10_4_PDEV_FIPS_CMDID,
1840 WMI_10_4_TT_SET_CONF_CMDID,
1841 WMI_10_4_FWTEST_CMDID,
1842 WMI_10_4_VDEV_ATF_REQUEST_CMDID,
1843 WMI_10_4_PEER_ATF_REQUEST_CMDID,
1844 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID,
1845 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID,
1846 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID,
1847 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID,
1848 WMI_10_4_PDEV_GET_TPC_CMDID,
1849 WMI_10_4_PDEV_GET_AST_INFO_CMDID,
1850 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID,
1851 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID,
1852 WMI_10_4_PDEV_GET_INFO_CMDID,
1853 WMI_10_4_VDEV_GET_INFO_CMDID,
1854 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID,
1855 WMI_10_4_MU_CAL_START_CMDID,
1856 WMI_10_4_SET_CCA_PARAMS_CMDID,
1857 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1858 WMI_10_4_EXT_RESOURCE_CFG_CMDID,
1859 WMI_10_4_VDEV_SET_IE_CMDID,
1860 WMI_10_4_SET_LTEU_CONFIG_CMDID,
1861 WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID,
1862 WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID,
1863 WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG,
1864 WMI_10_4_PEER_BWF_REQUEST_CMDID,
1865 WMI_10_4_BTCOEX_CFG_CMDID,
1866 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID,
1867 WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID,
1868 WMI_10_4_PEER_GID_USERPOS_LIST_CMDID,
1869 WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID,
1870 WMI_10_4_COEX_VERSION_CFG_CMID,
1871 WMI_10_4_PDEV_GET_RX_FILTER_CMDID,
1872 WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID,
1873 WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID,
1874 WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID,
1875 WMI_10_4_CONFIG_SMART_LOGGING_CMDID,
1876 WMI_10_4_DEBUG_FATAL_CONDITION_CMDID,
1877 WMI_10_4_GET_TSF_TIMER_CMDID,
1878 WMI_10_4_PDEV_GET_TPC_TABLE_CMDID,
1879 WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID,
1880 WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID,
1881 WMI_10_4_TDLS_SET_STATE_CMDID,
1882 WMI_10_4_TDLS_PEER_UPDATE_CMDID,
1883 WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID,
1884 WMI_10_4_PDEV_SEND_FD_CMDID,
1885 WMI_10_4_ENABLE_FILS_CMDID,
1886 WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID,
1887 WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID,
1888 WMI_10_4_RADAR_FOUND_CMDID,
1889 WMI_10_4_PEER_CFR_CAPTURE_CMDID,
1890 WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
1891 WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
1892 };
1893
1894 enum wmi_10_4_event_id {
1895 WMI_10_4_SERVICE_READY_EVENTID = 0x8000,
1896 WMI_10_4_READY_EVENTID,
1897 WMI_10_4_DEBUG_MESG_EVENTID,
1898 WMI_10_4_START_EVENTID = 0x9000,
1899 WMI_10_4_END_EVENTID = 0x9FFF,
1900 WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID,
1901 WMI_10_4_ECHO_EVENTID,
1902 WMI_10_4_UPDATE_STATS_EVENTID,
1903 WMI_10_4_INST_RSSI_STATS_EVENTID,
1904 WMI_10_4_VDEV_START_RESP_EVENTID,
1905 WMI_10_4_VDEV_STANDBY_REQ_EVENTID,
1906 WMI_10_4_VDEV_RESUME_REQ_EVENTID,
1907 WMI_10_4_VDEV_STOPPED_EVENTID,
1908 WMI_10_4_PEER_STA_KICKOUT_EVENTID,
1909 WMI_10_4_HOST_SWBA_EVENTID,
1910 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID,
1911 WMI_10_4_MGMT_RX_EVENTID,
1912 WMI_10_4_CHAN_INFO_EVENTID,
1913 WMI_10_4_PHYERR_EVENTID,
1914 WMI_10_4_ROAM_EVENTID,
1915 WMI_10_4_PROFILE_MATCH,
1916 WMI_10_4_DEBUG_PRINT_EVENTID,
1917 WMI_10_4_PDEV_QVIT_EVENTID,
1918 WMI_10_4_WLAN_PROFILE_DATA_EVENTID,
1919 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID,
1920 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID,
1921 WMI_10_4_RTT_ERROR_REPORT_EVENTID,
1922 WMI_10_4_RTT_KEEPALIVE_EVENTID,
1923 WMI_10_4_OEM_CAPABILITY_EVENTID,
1924 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID,
1925 WMI_10_4_OEM_ERROR_REPORT_EVENTID,
1926 WMI_10_4_NAN_EVENTID,
1927 WMI_10_4_WOW_WAKEUP_HOST_EVENTID,
1928 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID,
1929 WMI_10_4_GTK_REKEY_FAIL_EVENTID,
1930 WMI_10_4_DCS_INTERFERENCE_EVENTID,
1931 WMI_10_4_PDEV_TPC_CONFIG_EVENTID,
1932 WMI_10_4_CSA_HANDLING_EVENTID,
1933 WMI_10_4_GPIO_INPUT_EVENTID,
1934 WMI_10_4_PEER_RATECODE_LIST_EVENTID,
1935 WMI_10_4_GENERIC_BUFFER_EVENTID,
1936 WMI_10_4_MCAST_BUF_RELEASE_EVENTID,
1937 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID,
1938 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID,
1939 WMI_10_4_WDS_PEER_EVENTID,
1940 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID,
1941 WMI_10_4_PDEV_FIPS_EVENTID,
1942 WMI_10_4_TT_STATS_EVENTID,
1943 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID,
1944 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID,
1945 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID,
1946 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID,
1947 WMI_10_4_PDEV_NFCAL_POWER_EVENTID,
1948 WMI_10_4_PDEV_TPC_EVENTID,
1949 WMI_10_4_PDEV_GET_AST_INFO_EVENTID,
1950 WMI_10_4_PDEV_TEMPERATURE_EVENTID,
1951 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID,
1952 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID,
1953 WMI_10_4_MU_REPORT_EVENTID,
1954 WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID,
1955 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID,
1956 WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID,
1957 WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID,
1958 WMI_10_4_ATF_PEER_STATS_EVENTID,
1959 WMI_10_4_PDEV_GET_RX_FILTER_EVENTID,
1960 WMI_10_4_NAC_RSSI_EVENTID,
1961 WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID,
1962 WMI_10_4_GET_TSF_TIMER_RESP_EVENTID,
1963 WMI_10_4_PDEV_TPC_TABLE_EVENTID,
1964 WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID,
1965 WMI_10_4_TDLS_PEER_EVENTID,
1966 WMI_10_4_HOST_SWFDA_EVENTID,
1967 WMI_10_4_ESP_ESTIMATE_EVENTID,
1968 WMI_10_4_DFS_STATUS_CHECK_EVENTID,
1969 WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1,
1970 };
1971
1972 enum wmi_phy_mode {
1973 MODE_11A = 0, /* 11a Mode */
1974 MODE_11G = 1, /* 11b/g Mode */
1975 MODE_11B = 2, /* 11b Mode */
1976 MODE_11GONLY = 3, /* 11g only Mode */
1977 MODE_11NA_HT20 = 4, /* 11a HT20 mode */
1978 MODE_11NG_HT20 = 5, /* 11g HT20 mode */
1979 MODE_11NA_HT40 = 6, /* 11a HT40 mode */
1980 MODE_11NG_HT40 = 7, /* 11g HT40 mode */
1981 MODE_11AC_VHT20 = 8,
1982 MODE_11AC_VHT40 = 9,
1983 MODE_11AC_VHT80 = 10,
1984 /* MODE_11AC_VHT160 = 11, */
1985 MODE_11AC_VHT20_2G = 11,
1986 MODE_11AC_VHT40_2G = 12,
1987 MODE_11AC_VHT80_2G = 13,
1988 MODE_11AC_VHT80_80 = 14,
1989 MODE_11AC_VHT160 = 15,
1990 MODE_UNKNOWN = 16,
1991 MODE_MAX = 16
1992 };
1993
1994 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)
1995 {
1996 switch (mode) {
1997 case MODE_11A:
1998 return "11a";
1999 case MODE_11G:
2000 return "11g";
2001 case MODE_11B:
2002 return "11b";
2003 case MODE_11GONLY:
2004 return "11gonly";
2005 case MODE_11NA_HT20:
2006 return "11na-ht20";
2007 case MODE_11NG_HT20:
2008 return "11ng-ht20";
2009 case MODE_11NA_HT40:
2010 return "11na-ht40";
2011 case MODE_11NG_HT40:
2012 return "11ng-ht40";
2013 case MODE_11AC_VHT20:
2014 return "11ac-vht20";
2015 case MODE_11AC_VHT40:
2016 return "11ac-vht40";
2017 case MODE_11AC_VHT80:
2018 return "11ac-vht80";
2019 case MODE_11AC_VHT160:
2020 return "11ac-vht160";
2021 case MODE_11AC_VHT80_80:
2022 return "11ac-vht80+80";
2023 case MODE_11AC_VHT20_2G:
2024 return "11ac-vht20-2g";
2025 case MODE_11AC_VHT40_2G:
2026 return "11ac-vht40-2g";
2027 case MODE_11AC_VHT80_2G:
2028 return "11ac-vht80-2g";
2029 case MODE_UNKNOWN:
2030 /* skip */
2031 break;
2032
2033 /* no default handler to allow compiler to check that the
2034 * enum is fully handled
2035 */
2036 }
2037
2038 return "<unknown>";
2039 }
2040
2041 #define WMI_CHAN_LIST_TAG 0x1
2042 #define WMI_SSID_LIST_TAG 0x2
2043 #define WMI_BSSID_LIST_TAG 0x3
2044 #define WMI_IE_TAG 0x4
2045
2046 struct wmi_channel {
2047 __le32 mhz;
2048 __le32 band_center_freq1;
2049 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */
2050 union {
2051 __le32 flags; /* WMI_CHAN_FLAG_ */
2052 struct {
2053 u8 mode; /* only 6 LSBs */
2054 } __packed;
2055 } __packed;
2056 union {
2057 __le32 reginfo0;
2058 struct {
2059 /* note: power unit is 0.5 dBm */
2060 u8 min_power;
2061 u8 max_power;
2062 u8 reg_power;
2063 u8 reg_classid;
2064 } __packed;
2065 } __packed;
2066 union {
2067 __le32 reginfo1;
2068 struct {
2069 u8 antenna_max;
2070 u8 max_tx_power;
2071 } __packed;
2072 } __packed;
2073 } __packed;
2074
2075 struct wmi_channel_arg {
2076 u32 freq;
2077 u32 band_center_freq1;
2078 u32 band_center_freq2;
2079 bool passive;
2080 bool allow_ibss;
2081 bool allow_ht;
2082 bool allow_vht;
2083 bool ht40plus;
2084 bool chan_radar;
2085 /* note: power unit is 0.5 dBm */
2086 u32 min_power;
2087 u32 max_power;
2088 u32 max_reg_power;
2089 u32 max_antenna_gain;
2090 u32 reg_class_id;
2091 enum wmi_phy_mode mode;
2092 };
2093
2094 enum wmi_channel_change_cause {
2095 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0,
2096 WMI_CHANNEL_CHANGE_CAUSE_CSA,
2097 };
2098
2099 #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6)
2100 #define WMI_CHAN_FLAG_PASSIVE (1 << 7)
2101 #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8)
2102 #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9)
2103 #define WMI_CHAN_FLAG_DFS (1 << 10)
2104 #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11)
2105 #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12)
2106
2107 /* Indicate reason for channel switch */
2108 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
2109 /* DFS required on channel for 2nd segment of VHT160 and VHT80+80*/
2110 #define WMI_CHAN_FLAG_DFS_CFREQ2 (1 << 15)
2111 #define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */
2112
2113 /* HT Capabilities*/
2114 #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */
2115 #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */
2116 #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */
2117 #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */
2118 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3
2119 #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */
2120 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4
2121 #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */
2122 #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */
2123 #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */
2124 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
2125 #define WMI_HT_CAP_HT40_SGI 0x0800
2126 #define WMI_HT_CAP_RX_LDPC 0x1000 /* LDPC RX support */
2127 #define WMI_HT_CAP_TX_LDPC 0x2000 /* LDPC TX support */
2128
2129 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \
2130 WMI_HT_CAP_HT20_SGI | \
2131 WMI_HT_CAP_HT40_SGI | \
2132 WMI_HT_CAP_TX_STBC | \
2133 WMI_HT_CAP_RX_STBC | \
2134 WMI_HT_CAP_LDPC)
2135
2136 /*
2137 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
2138 * field. The fields not defined here are not supported, or reserved.
2139 * Do not change these masks and if you have to add new one follow the
2140 * bitmask as specified by 802.11ac draft.
2141 */
2142
2143 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003
2144 #define WMI_VHT_CAP_RX_LDPC 0x00000010
2145 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020
2146 #define WMI_VHT_CAP_SGI_160MHZ 0x00000040
2147 #define WMI_VHT_CAP_TX_STBC 0x00000080
2148 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300
2149 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8
2150 #define WMI_VHT_CAP_SU_BFER 0x00000800
2151 #define WMI_VHT_CAP_SU_BFEE 0x00001000
2152 #define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000
2153 #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13
2154 #define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000
2155 #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16
2156 #define WMI_VHT_CAP_MU_BFER 0x00080000
2157 #define WMI_VHT_CAP_MU_BFEE 0x00100000
2158 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000
2159 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23
2160 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000
2161 #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000
2162
2163 /* The following also refer for max HT AMSDU */
2164 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000
2165 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001
2166 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002
2167
2168 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \
2169 WMI_VHT_CAP_RX_LDPC | \
2170 WMI_VHT_CAP_SGI_80MHZ | \
2171 WMI_VHT_CAP_TX_STBC | \
2172 WMI_VHT_CAP_RX_STBC_MASK | \
2173 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \
2174 WMI_VHT_CAP_RX_FIXED_ANT | \
2175 WMI_VHT_CAP_TX_FIXED_ANT)
2176
2177 /*
2178 * Interested readers refer to Rx/Tx MCS Map definition as defined in
2179 * 802.11ac
2180 */
2181 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1))
2182 #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000
2183 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16
2184
2185 enum {
2186 REGDMN_MODE_11A = 0x00001, /* 11a channels */
2187 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */
2188 REGDMN_MODE_11B = 0x00004, /* 11b channels */
2189 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */
2190 REGDMN_MODE_11G = 0x00008, /* XXX historical */
2191 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */
2192 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */
2193 REGDMN_MODE_XR = 0x00100, /* XR channels */
2194 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */
2195 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */
2196 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */
2197 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */
2198 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */
2199 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */
2200 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */
2201 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */
2202 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */
2203 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */
2204 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */
2205 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */
2206 REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */
2207 REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */
2208 REGDMN_MODE_ALL = 0xffffffff
2209 };
2210
2211 #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001
2212 #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002
2213 #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004
2214
2215 /* regulatory capabilities */
2216 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040
2217 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080
2218 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100
2219 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200
2220 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400
2221 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800
2222
2223 struct hal_reg_capabilities {
2224 /* regdomain value specified in EEPROM */
2225 __le32 eeprom_rd;
2226 /*regdomain */
2227 __le32 eeprom_rd_ext;
2228 /* CAP1 capabilities bit map. */
2229 __le32 regcap1;
2230 /* REGDMN EEPROM CAP. */
2231 __le32 regcap2;
2232 /* REGDMN MODE */
2233 __le32 wireless_modes;
2234 __le32 low_2ghz_chan;
2235 __le32 high_2ghz_chan;
2236 __le32 low_5ghz_chan;
2237 __le32 high_5ghz_chan;
2238 } __packed;
2239
2240 enum wlan_mode_capability {
2241 WHAL_WLAN_11A_CAPABILITY = 0x1,
2242 WHAL_WLAN_11G_CAPABILITY = 0x2,
2243 WHAL_WLAN_11AG_CAPABILITY = 0x3,
2244 };
2245
2246 /* structure used by FW for requesting host memory */
2247 struct wlan_host_mem_req {
2248 /* ID of the request */
2249 __le32 req_id;
2250 /* size of the of each unit */
2251 __le32 unit_size;
2252 /* flags to indicate that
2253 * the number units is dependent
2254 * on number of resources(num vdevs num peers .. etc)
2255 */
2256 __le32 num_unit_info;
2257 /*
2258 * actual number of units to allocate . if flags in the num_unit_info
2259 * indicate that number of units is tied to number of a particular
2260 * resource to allocate then num_units filed is set to 0 and host
2261 * will derive the number units from number of the resources it is
2262 * requesting.
2263 */
2264 __le32 num_units;
2265 } __packed;
2266
2267 /*
2268 * The following struct holds optional payload for
2269 * wmi_service_ready_event,e.g., 11ac pass some of the
2270 * device capability to the host.
2271 */
2272 struct wmi_service_ready_event {
2273 __le32 sw_version;
2274 __le32 sw_version_1;
2275 __le32 abi_version;
2276 /* WMI_PHY_CAPABILITY */
2277 __le32 phy_capability;
2278 /* Maximum number of frag table entries that SW will populate less 1 */
2279 __le32 max_frag_entry;
2280 __le32 wmi_service_bitmap[16];
2281 __le32 num_rf_chains;
2282 /*
2283 * The following field is only valid for service type
2284 * WMI_SERVICE_11AC
2285 */
2286 __le32 ht_cap_info; /* WMI HT Capability */
2287 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2288 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2289 __le32 hw_min_tx_power;
2290 __le32 hw_max_tx_power;
2291 struct hal_reg_capabilities hal_reg_capabilities;
2292 __le32 sys_cap_info;
2293 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2294 /*
2295 * Max beacon and Probe Response IE offload size
2296 * (includes optional P2P IEs)
2297 */
2298 __le32 max_bcn_ie_size;
2299 /*
2300 * request to host to allocate a chuck of memory and pss it down to FW
2301 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2302 * data structures. Only valid for low latency interfaces like PCIE
2303 * where FW can access this memory directly (or) by DMA.
2304 */
2305 __le32 num_mem_reqs;
2306 struct wlan_host_mem_req mem_reqs[];
2307 } __packed;
2308
2309 /* This is the definition from 10.X firmware branch */
2310 struct wmi_10x_service_ready_event {
2311 __le32 sw_version;
2312 __le32 abi_version;
2313
2314 /* WMI_PHY_CAPABILITY */
2315 __le32 phy_capability;
2316
2317 /* Maximum number of frag table entries that SW will populate less 1 */
2318 __le32 max_frag_entry;
2319 __le32 wmi_service_bitmap[16];
2320 __le32 num_rf_chains;
2321
2322 /*
2323 * The following field is only valid for service type
2324 * WMI_SERVICE_11AC
2325 */
2326 __le32 ht_cap_info; /* WMI HT Capability */
2327 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2328 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2329 __le32 hw_min_tx_power;
2330 __le32 hw_max_tx_power;
2331
2332 struct hal_reg_capabilities hal_reg_capabilities;
2333
2334 __le32 sys_cap_info;
2335 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2336
2337 /*
2338 * request to host to allocate a chuck of memory and pss it down to FW
2339 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2340 * data structures. Only valid for low latency interfaces like PCIE
2341 * where FW can access this memory directly (or) by DMA.
2342 */
2343 __le32 num_mem_reqs;
2344
2345 struct wlan_host_mem_req mem_reqs[];
2346 } __packed;
2347
2348 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ)
2349 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ)
2350
2351 struct wmi_ready_event {
2352 __le32 sw_version;
2353 __le32 abi_version;
2354 struct wmi_mac_addr mac_addr;
2355 __le32 status;
2356 } __packed;
2357
2358 struct wmi_resource_config {
2359 /* number of virtual devices (VAPs) to support */
2360 __le32 num_vdevs;
2361
2362 /* number of peer nodes to support */
2363 __le32 num_peers;
2364
2365 /*
2366 * In offload mode target supports features like WOW, chatter and
2367 * other protocol offloads. In order to support them some
2368 * functionalities like reorder buffering, PN checking need to be
2369 * done in target. This determines maximum number of peers supported
2370 * by target in offload mode
2371 */
2372 __le32 num_offload_peers;
2373
2374 /* For target-based RX reordering */
2375 __le32 num_offload_reorder_bufs;
2376
2377 /* number of keys per peer */
2378 __le32 num_peer_keys;
2379
2380 /* total number of TX/RX data TIDs */
2381 __le32 num_tids;
2382
2383 /*
2384 * max skid for resolving hash collisions
2385 *
2386 * The address search table is sparse, so that if two MAC addresses
2387 * result in the same hash value, the second of these conflicting
2388 * entries can slide to the next index in the address search table,
2389 * and use it, if it is unoccupied. This ast_skid_limit parameter
2390 * specifies the upper bound on how many subsequent indices to search
2391 * over to find an unoccupied space.
2392 */
2393 __le32 ast_skid_limit;
2394
2395 /*
2396 * the nominal chain mask for transmit
2397 *
2398 * The chain mask may be modified dynamically, e.g. to operate AP
2399 * tx with a reduced number of chains if no clients are associated.
2400 * This configuration parameter specifies the nominal chain-mask that
2401 * should be used when not operating with a reduced set of tx chains.
2402 */
2403 __le32 tx_chain_mask;
2404
2405 /*
2406 * the nominal chain mask for receive
2407 *
2408 * The chain mask may be modified dynamically, e.g. for a client
2409 * to use a reduced number of chains for receive if the traffic to
2410 * the client is low enough that it doesn't require downlink MIMO
2411 * or antenna diversity.
2412 * This configuration parameter specifies the nominal chain-mask that
2413 * should be used when not operating with a reduced set of rx chains.
2414 */
2415 __le32 rx_chain_mask;
2416
2417 /*
2418 * what rx reorder timeout (ms) to use for the AC
2419 *
2420 * Each WMM access class (voice, video, best-effort, background) will
2421 * have its own timeout value to dictate how long to wait for missing
2422 * rx MPDUs to arrive before flushing subsequent MPDUs that have
2423 * already been received.
2424 * This parameter specifies the timeout in milliseconds for each
2425 * class.
2426 */
2427 __le32 rx_timeout_pri_vi;
2428 __le32 rx_timeout_pri_vo;
2429 __le32 rx_timeout_pri_be;
2430 __le32 rx_timeout_pri_bk;
2431
2432 /*
2433 * what mode the rx should decap packets to
2434 *
2435 * MAC can decap to RAW (no decap), native wifi or Ethernet types
2436 * THis setting also determines the default TX behavior, however TX
2437 * behavior can be modified on a per VAP basis during VAP init
2438 */
2439 __le32 rx_decap_mode;
2440
2441 /* what is the maximum number of scan requests that can be queued */
2442 __le32 scan_max_pending_reqs;
2443
2444 /* maximum VDEV that could use BMISS offload */
2445 __le32 bmiss_offload_max_vdev;
2446
2447 /* maximum VDEV that could use offload roaming */
2448 __le32 roam_offload_max_vdev;
2449
2450 /* maximum AP profiles that would push to offload roaming */
2451 __le32 roam_offload_max_ap_profiles;
2452
2453 /*
2454 * how many groups to use for mcast->ucast conversion
2455 *
2456 * The target's WAL maintains a table to hold information regarding
2457 * which peers belong to a given multicast group, so that if
2458 * multicast->unicast conversion is enabled, the target can convert
2459 * multicast tx frames to a series of unicast tx frames, to each
2460 * peer within the multicast group.
2461 This num_mcast_groups configuration parameter tells the target how
2462 * many multicast groups to provide storage for within its multicast
2463 * group membership table.
2464 */
2465 __le32 num_mcast_groups;
2466
2467 /*
2468 * size to alloc for the mcast membership table
2469 *
2470 * This num_mcast_table_elems configuration parameter tells the
2471 * target how many peer elements it needs to provide storage for in
2472 * its multicast group membership table.
2473 * These multicast group membership table elements are shared by the
2474 * multicast groups stored within the table.
2475 */
2476 __le32 num_mcast_table_elems;
2477
2478 /*
2479 * whether/how to do multicast->unicast conversion
2480 *
2481 * This configuration parameter specifies whether the target should
2482 * perform multicast --> unicast conversion on transmit, and if so,
2483 * what to do if it finds no entries in its multicast group
2484 * membership table for the multicast IP address in the tx frame.
2485 * Configuration value:
2486 * 0 -> Do not perform multicast to unicast conversion.
2487 * 1 -> Convert multicast frames to unicast, if the IP multicast
2488 * address from the tx frame is found in the multicast group
2489 * membership table. If the IP multicast address is not found,
2490 * drop the frame.
2491 * 2 -> Convert multicast frames to unicast, if the IP multicast
2492 * address from the tx frame is found in the multicast group
2493 * membership table. If the IP multicast address is not found,
2494 * transmit the frame as multicast.
2495 */
2496 __le32 mcast2ucast_mode;
2497
2498 /*
2499 * how much memory to allocate for a tx PPDU dbg log
2500 *
2501 * This parameter controls how much memory the target will allocate
2502 * to store a log of tx PPDU meta-information (how large the PPDU
2503 * was, when it was sent, whether it was successful, etc.)
2504 */
2505 __le32 tx_dbg_log_size;
2506
2507 /* how many AST entries to be allocated for WDS */
2508 __le32 num_wds_entries;
2509
2510 /*
2511 * MAC DMA burst size, e.g., For target PCI limit can be
2512 * 0 -default, 1 256B
2513 */
2514 __le32 dma_burst_size;
2515
2516 /*
2517 * Fixed delimiters to be inserted after every MPDU to
2518 * account for interface latency to avoid underrun.
2519 */
2520 __le32 mac_aggr_delim;
2521
2522 /*
2523 * determine whether target is responsible for detecting duplicate
2524 * non-aggregate MPDU and timing out stale fragments.
2525 *
2526 * A-MPDU reordering is always performed on the target.
2527 *
2528 * 0: target responsible for frag timeout and dup checking
2529 * 1: host responsible for frag timeout and dup checking
2530 */
2531 __le32 rx_skip_defrag_timeout_dup_detection_check;
2532
2533 /*
2534 * Configuration for VoW :
2535 * No of Video Nodes to be supported
2536 * and Max no of descriptors for each Video link (node).
2537 */
2538 __le32 vow_config;
2539
2540 /* maximum VDEV that could use GTK offload */
2541 __le32 gtk_offload_max_vdev;
2542
2543 /* Number of msdu descriptors target should use */
2544 __le32 num_msdu_desc;
2545
2546 /*
2547 * Max. number of Tx fragments per MSDU
2548 * This parameter controls the max number of Tx fragments per MSDU.
2549 * This is sent by the target as part of the WMI_SERVICE_READY event
2550 * and is overridden by the OS shim as required.
2551 */
2552 __le32 max_frag_entries;
2553 } __packed;
2554
2555 struct wmi_resource_config_10x {
2556 /* number of virtual devices (VAPs) to support */
2557 __le32 num_vdevs;
2558
2559 /* number of peer nodes to support */
2560 __le32 num_peers;
2561
2562 /* number of keys per peer */
2563 __le32 num_peer_keys;
2564
2565 /* total number of TX/RX data TIDs */
2566 __le32 num_tids;
2567
2568 /*
2569 * max skid for resolving hash collisions
2570 *
2571 * The address search table is sparse, so that if two MAC addresses
2572 * result in the same hash value, the second of these conflicting
2573 * entries can slide to the next index in the address search table,
2574 * and use it, if it is unoccupied. This ast_skid_limit parameter
2575 * specifies the upper bound on how many subsequent indices to search
2576 * over to find an unoccupied space.
2577 */
2578 __le32 ast_skid_limit;
2579
2580 /*
2581 * the nominal chain mask for transmit
2582 *
2583 * The chain mask may be modified dynamically, e.g. to operate AP
2584 * tx with a reduced number of chains if no clients are associated.
2585 * This configuration parameter specifies the nominal chain-mask that
2586 * should be used when not operating with a reduced set of tx chains.
2587 */
2588 __le32 tx_chain_mask;
2589
2590 /*
2591 * the nominal chain mask for receive
2592 *
2593 * The chain mask may be modified dynamically, e.g. for a client
2594 * to use a reduced number of chains for receive if the traffic to
2595 * the client is low enough that it doesn't require downlink MIMO
2596 * or antenna diversity.
2597 * This configuration parameter specifies the nominal chain-mask that
2598 * should be used when not operating with a reduced set of rx chains.
2599 */
2600 __le32 rx_chain_mask;
2601
2602 /*
2603 * what rx reorder timeout (ms) to use for the AC
2604 *
2605 * Each WMM access class (voice, video, best-effort, background) will
2606 * have its own timeout value to dictate how long to wait for missing
2607 * rx MPDUs to arrive before flushing subsequent MPDUs that have
2608 * already been received.
2609 * This parameter specifies the timeout in milliseconds for each
2610 * class.
2611 */
2612 __le32 rx_timeout_pri_vi;
2613 __le32 rx_timeout_pri_vo;
2614 __le32 rx_timeout_pri_be;
2615 __le32 rx_timeout_pri_bk;
2616
2617 /*
2618 * what mode the rx should decap packets to
2619 *
2620 * MAC can decap to RAW (no decap), native wifi or Ethernet types
2621 * THis setting also determines the default TX behavior, however TX
2622 * behavior can be modified on a per VAP basis during VAP init
2623 */
2624 __le32 rx_decap_mode;
2625
2626 /* what is the maximum number of scan requests that can be queued */
2627 __le32 scan_max_pending_reqs;
2628
2629 /* maximum VDEV that could use BMISS offload */
2630 __le32 bmiss_offload_max_vdev;
2631
2632 /* maximum VDEV that could use offload roaming */
2633 __le32 roam_offload_max_vdev;
2634
2635 /* maximum AP profiles that would push to offload roaming */
2636 __le32 roam_offload_max_ap_profiles;
2637
2638 /*
2639 * how many groups to use for mcast->ucast conversion
2640 *
2641 * The target's WAL maintains a table to hold information regarding
2642 * which peers belong to a given multicast group, so that if
2643 * multicast->unicast conversion is enabled, the target can convert
2644 * multicast tx frames to a series of unicast tx frames, to each
2645 * peer within the multicast group.
2646 This num_mcast_groups configuration parameter tells the target how
2647 * many multicast groups to provide storage for within its multicast
2648 * group membership table.
2649 */
2650 __le32 num_mcast_groups;
2651
2652 /*
2653 * size to alloc for the mcast membership table
2654 *
2655 * This num_mcast_table_elems configuration parameter tells the
2656 * target how many peer elements it needs to provide storage for in
2657 * its multicast group membership table.
2658 * These multicast group membership table elements are shared by the
2659 * multicast groups stored within the table.
2660 */
2661 __le32 num_mcast_table_elems;
2662
2663 /*
2664 * whether/how to do multicast->unicast conversion
2665 *
2666 * This configuration parameter specifies whether the target should
2667 * perform multicast --> unicast conversion on transmit, and if so,
2668 * what to do if it finds no entries in its multicast group
2669 * membership table for the multicast IP address in the tx frame.
2670 * Configuration value:
2671 * 0 -> Do not perform multicast to unicast conversion.
2672 * 1 -> Convert multicast frames to unicast, if the IP multicast
2673 * address from the tx frame is found in the multicast group
2674 * membership table. If the IP multicast address is not found,
2675 * drop the frame.
2676 * 2 -> Convert multicast frames to unicast, if the IP multicast
2677 * address from the tx frame is found in the multicast group
2678 * membership table. If the IP multicast address is not found,
2679 * transmit the frame as multicast.
2680 */
2681 __le32 mcast2ucast_mode;
2682
2683 /*
2684 * how much memory to allocate for a tx PPDU dbg log
2685 *
2686 * This parameter controls how much memory the target will allocate
2687 * to store a log of tx PPDU meta-information (how large the PPDU
2688 * was, when it was sent, whether it was successful, etc.)
2689 */
2690 __le32 tx_dbg_log_size;
2691
2692 /* how many AST entries to be allocated for WDS */
2693 __le32 num_wds_entries;
2694
2695 /*
2696 * MAC DMA burst size, e.g., For target PCI limit can be
2697 * 0 -default, 1 256B
2698 */
2699 __le32 dma_burst_size;
2700
2701 /*
2702 * Fixed delimiters to be inserted after every MPDU to
2703 * account for interface latency to avoid underrun.
2704 */
2705 __le32 mac_aggr_delim;
2706
2707 /*
2708 * determine whether target is responsible for detecting duplicate
2709 * non-aggregate MPDU and timing out stale fragments.
2710 *
2711 * A-MPDU reordering is always performed on the target.
2712 *
2713 * 0: target responsible for frag timeout and dup checking
2714 * 1: host responsible for frag timeout and dup checking
2715 */
2716 __le32 rx_skip_defrag_timeout_dup_detection_check;
2717
2718 /*
2719 * Configuration for VoW :
2720 * No of Video Nodes to be supported
2721 * and Max no of descriptors for each Video link (node).
2722 */
2723 __le32 vow_config;
2724
2725 /* Number of msdu descriptors target should use */
2726 __le32 num_msdu_desc;
2727
2728 /*
2729 * Max. number of Tx fragments per MSDU
2730 * This parameter controls the max number of Tx fragments per MSDU.
2731 * This is sent by the target as part of the WMI_SERVICE_READY event
2732 * and is overridden by the OS shim as required.
2733 */
2734 __le32 max_frag_entries;
2735 } __packed;
2736
2737 enum wmi_10_2_feature_mask {
2738 WMI_10_2_RX_BATCH_MODE = BIT(0),
2739 WMI_10_2_ATF_CONFIG = BIT(1),
2740 WMI_10_2_COEX_GPIO = BIT(3),
2741 WMI_10_2_BSS_CHAN_INFO = BIT(6),
2742 WMI_10_2_PEER_STATS = BIT(7),
2743 };
2744
2745 struct wmi_resource_config_10_2 {
2746 struct wmi_resource_config_10x common;
2747 __le32 max_peer_ext_stats;
2748 __le32 smart_ant_cap; /* 0-disable, 1-enable */
2749 __le32 bk_min_free;
2750 __le32 be_min_free;
2751 __le32 vi_min_free;
2752 __le32 vo_min_free;
2753 __le32 feature_mask;
2754 } __packed;
2755
2756 #define NUM_UNITS_IS_NUM_VDEVS BIT(0)
2757 #define NUM_UNITS_IS_NUM_PEERS BIT(1)
2758 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2)
2759
2760 struct wmi_resource_config_10_4 {
2761 /* Number of virtual devices (VAPs) to support */
2762 __le32 num_vdevs;
2763
2764 /* Number of peer nodes to support */
2765 __le32 num_peers;
2766
2767 /* Number of active peer nodes to support */
2768 __le32 num_active_peers;
2769
2770 /* In offload mode, target supports features like WOW, chatter and other
2771 * protocol offloads. In order to support them some functionalities like
2772 * reorder buffering, PN checking need to be done in target.
2773 * This determines maximum number of peers supported by target in
2774 * offload mode.
2775 */
2776 __le32 num_offload_peers;
2777
2778 /* Number of reorder buffers available for doing target based reorder
2779 * Rx reorder buffering
2780 */
2781 __le32 num_offload_reorder_buffs;
2782
2783 /* Number of keys per peer */
2784 __le32 num_peer_keys;
2785
2786 /* Total number of TX/RX data TIDs */
2787 __le32 num_tids;
2788
2789 /* Max skid for resolving hash collisions.
2790 * The address search table is sparse, so that if two MAC addresses
2791 * result in the same hash value, the second of these conflicting
2792 * entries can slide to the next index in the address search table,
2793 * and use it, if it is unoccupied. This ast_skid_limit parameter
2794 * specifies the upper bound on how many subsequent indices to search
2795 * over to find an unoccupied space.
2796 */
2797 __le32 ast_skid_limit;
2798
2799 /* The nominal chain mask for transmit.
2800 * The chain mask may be modified dynamically, e.g. to operate AP tx
2801 * with a reduced number of chains if no clients are associated.
2802 * This configuration parameter specifies the nominal chain-mask that
2803 * should be used when not operating with a reduced set of tx chains.
2804 */
2805 __le32 tx_chain_mask;
2806
2807 /* The nominal chain mask for receive.
2808 * The chain mask may be modified dynamically, e.g. for a client to use
2809 * a reduced number of chains for receive if the traffic to the client
2810 * is low enough that it doesn't require downlink MIMO or antenna
2811 * diversity. This configuration parameter specifies the nominal
2812 * chain-mask that should be used when not operating with a reduced
2813 * set of rx chains.
2814 */
2815 __le32 rx_chain_mask;
2816
2817 /* What rx reorder timeout (ms) to use for the AC.
2818 * Each WMM access class (voice, video, best-effort, background) will
2819 * have its own timeout value to dictate how long to wait for missing
2820 * rx MPDUs to arrive before flushing subsequent MPDUs that have already
2821 * been received. This parameter specifies the timeout in milliseconds
2822 * for each class.
2823 */
2824 __le32 rx_timeout_pri[4];
2825
2826 /* What mode the rx should decap packets to.
2827 * MAC can decap to RAW (no decap), native wifi or Ethernet types.
2828 * This setting also determines the default TX behavior, however TX
2829 * behavior can be modified on a per VAP basis during VAP init
2830 */
2831 __le32 rx_decap_mode;
2832
2833 __le32 scan_max_pending_req;
2834
2835 __le32 bmiss_offload_max_vdev;
2836
2837 __le32 roam_offload_max_vdev;
2838
2839 __le32 roam_offload_max_ap_profiles;
2840
2841 /* How many groups to use for mcast->ucast conversion.
2842 * The target's WAL maintains a table to hold information regarding
2843 * which peers belong to a given multicast group, so that if
2844 * multicast->unicast conversion is enabled, the target can convert
2845 * multicast tx frames to a series of unicast tx frames, to each peer
2846 * within the multicast group. This num_mcast_groups configuration
2847 * parameter tells the target how many multicast groups to provide
2848 * storage for within its multicast group membership table.
2849 */
2850 __le32 num_mcast_groups;
2851
2852 /* Size to alloc for the mcast membership table.
2853 * This num_mcast_table_elems configuration parameter tells the target
2854 * how many peer elements it needs to provide storage for in its
2855 * multicast group membership table. These multicast group membership
2856 * table elements are shared by the multicast groups stored within
2857 * the table.
2858 */
2859 __le32 num_mcast_table_elems;
2860
2861 /* Whether/how to do multicast->unicast conversion.
2862 * This configuration parameter specifies whether the target should
2863 * perform multicast --> unicast conversion on transmit, and if so,
2864 * what to do if it finds no entries in its multicast group membership
2865 * table for the multicast IP address in the tx frame.
2866 * Configuration value:
2867 * 0 -> Do not perform multicast to unicast conversion.
2868 * 1 -> Convert multicast frames to unicast, if the IP multicast address
2869 * from the tx frame is found in the multicast group membership
2870 * table. If the IP multicast address is not found, drop the frame
2871 * 2 -> Convert multicast frames to unicast, if the IP multicast address
2872 * from the tx frame is found in the multicast group membership
2873 * table. If the IP multicast address is not found, transmit the
2874 * frame as multicast.
2875 */
2876 __le32 mcast2ucast_mode;
2877
2878 /* How much memory to allocate for a tx PPDU dbg log.
2879 * This parameter controls how much memory the target will allocate to
2880 * store a log of tx PPDU meta-information (how large the PPDU was,
2881 * when it was sent, whether it was successful, etc.)
2882 */
2883 __le32 tx_dbg_log_size;
2884
2885 /* How many AST entries to be allocated for WDS */
2886 __le32 num_wds_entries;
2887
2888 /* MAC DMA burst size. 0 -default, 1 -256B */
2889 __le32 dma_burst_size;
2890
2891 /* Fixed delimiters to be inserted after every MPDU to account for
2892 * interface latency to avoid underrun.
2893 */
2894 __le32 mac_aggr_delim;
2895
2896 /* Determine whether target is responsible for detecting duplicate
2897 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering
2898 * is always performed on the target.
2899 *
2900 * 0: target responsible for frag timeout and dup checking
2901 * 1: host responsible for frag timeout and dup checking
2902 */
2903 __le32 rx_skip_defrag_timeout_dup_detection_check;
2904
2905 /* Configuration for VoW : No of Video nodes to be supported and max
2906 * no of descriptors for each video link (node).
2907 */
2908 __le32 vow_config;
2909
2910 /* Maximum vdev that could use gtk offload */
2911 __le32 gtk_offload_max_vdev;
2912
2913 /* Number of msdu descriptors target should use */
2914 __le32 num_msdu_desc;
2915
2916 /* Max number of tx fragments per MSDU.
2917 * This parameter controls the max number of tx fragments per MSDU.
2918 * This will passed by target as part of the WMI_SERVICE_READY event
2919 * and is overridden by the OS shim as required.
2920 */
2921 __le32 max_frag_entries;
2922
2923 /* Max number of extended peer stats.
2924 * This parameter controls the max number of peers for which extended
2925 * statistics are supported by target
2926 */
2927 __le32 max_peer_ext_stats;
2928
2929 /* Smart antenna capabilities information.
2930 * 1 - Smart antenna is enabled
2931 * 0 - Smart antenna is disabled
2932 * In future this can contain smart antenna specific capabilities.
2933 */
2934 __le32 smart_ant_cap;
2935
2936 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO)
2937 * during init.
2938 */
2939 __le32 bk_minfree;
2940 __le32 be_minfree;
2941 __le32 vi_minfree;
2942 __le32 vo_minfree;
2943
2944 /* Rx batch mode capability.
2945 * 1 - Rx batch mode enabled
2946 * 0 - Rx batch mode disabled
2947 */
2948 __le32 rx_batchmode;
2949
2950 /* Thermal throttling capability.
2951 * 1 - Capable of thermal throttling
2952 * 0 - Not capable of thermal throttling
2953 */
2954 __le32 tt_support;
2955
2956 /* ATF configuration.
2957 * 1 - Enable ATF
2958 * 0 - Disable ATF
2959 */
2960 __le32 atf_config;
2961
2962 /* Configure padding to manage IP header un-alignment
2963 * 1 - Enable padding
2964 * 0 - Disable padding
2965 */
2966 __le32 iphdr_pad_config;
2967
2968 /* qwrap configuration (bits 15-0)
2969 * 1 - This is qwrap configuration
2970 * 0 - This is not qwrap
2971 *
2972 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables)
2973 * In order to get ack-RSSI reporting and to specify the tx-rate for
2974 * individual frames, this option must be enabled. This uses an extra
2975 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it.
2976 */
2977 __le32 qwrap_config;
2978 } __packed;
2979
2980 enum wmi_coex_version {
2981 WMI_NO_COEX_VERSION_SUPPORT = 0,
2982 /* 3 wire coex support*/
2983 WMI_COEX_VERSION_1 = 1,
2984 /* 2.5 wire coex support*/
2985 WMI_COEX_VERSION_2 = 2,
2986 /* 2.5 wire coex with duty cycle support */
2987 WMI_COEX_VERSION_3 = 3,
2988 /* 4 wire coex support*/
2989 WMI_COEX_VERSION_4 = 4,
2990 };
2991
2992 /**
2993 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags
2994 * @WMI_10_4_LTEU_SUPPORT: LTEU config
2995 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config
2996 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan
2997 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan
2998 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats
2999 * @WMI_10_4_PEER_STATS: Per station stats
3000 * @WMI_10_4_VDEV_STATS: Per vdev stats
3001 * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable
3002 * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable
3003 * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable
3004 * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable
3005 * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host
3006 * enable/disable
3007 * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable
3008 * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable
3009 */
3010 enum wmi_10_4_feature_mask {
3011 WMI_10_4_LTEU_SUPPORT = BIT(0),
3012 WMI_10_4_COEX_GPIO_SUPPORT = BIT(1),
3013 WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2),
3014 WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3),
3015 WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4),
3016 WMI_10_4_PEER_STATS = BIT(5),
3017 WMI_10_4_VDEV_STATS = BIT(6),
3018 WMI_10_4_TDLS = BIT(7),
3019 WMI_10_4_TDLS_OFFCHAN = BIT(8),
3020 WMI_10_4_TDLS_UAPSD_BUFFER_STA = BIT(9),
3021 WMI_10_4_TDLS_UAPSD_SLEEP_STA = BIT(10),
3022 WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11),
3023 WMI_10_4_TDLS_EXPLICIT_MODE_ONLY = BIT(12),
3024 WMI_10_4_TX_DATA_ACK_RSSI = BIT(16),
3025 WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT = BIT(17),
3026 WMI_10_4_REPORT_AIRTIME = BIT(18),
3027
3028 };
3029
3030 struct wmi_ext_resource_config_10_4_cmd {
3031 /* contains enum wmi_host_platform_type */
3032 __le32 host_platform_config;
3033 /* see enum wmi_10_4_feature_mask */
3034 __le32 fw_feature_bitmap;
3035 /* WLAN priority GPIO number */
3036 __le32 wlan_gpio_priority;
3037 /* see enum wmi_coex_version */
3038 __le32 coex_version;
3039 /* COEX GPIO config */
3040 __le32 coex_gpio_pin1;
3041 __le32 coex_gpio_pin2;
3042 __le32 coex_gpio_pin3;
3043 /* number of vdevs allowed to perform tdls */
3044 __le32 num_tdls_vdevs;
3045 /* number of peers to track per TDLS vdev */
3046 __le32 num_tdls_conn_table_entries;
3047 /* number of tdls sleep sta supported */
3048 __le32 max_tdls_concurrent_sleep_sta;
3049 /* number of tdls buffer sta supported */
3050 __le32 max_tdls_concurrent_buffer_sta;
3051 };
3052
3053 /* structure describing host memory chunk. */
3054 struct host_memory_chunk {
3055 /* id of the request that is passed up in service ready */
3056 __le32 req_id;
3057 /* the physical address the memory chunk */
3058 __le32 ptr;
3059 /* size of the chunk */
3060 __le32 size;
3061 } __packed;
3062
3063 struct wmi_host_mem_chunks {
3064 __le32 count;
3065 /* some fw revisions require at least 1 chunk regardless of count */
3066 struct host_memory_chunk items[1];
3067 } __packed;
3068
3069 struct wmi_init_cmd {
3070 struct wmi_resource_config resource_config;
3071 struct wmi_host_mem_chunks mem_chunks;
3072 } __packed;
3073
3074 /* _10x structure is from 10.X FW API */
3075 struct wmi_init_cmd_10x {
3076 struct wmi_resource_config_10x resource_config;
3077 struct wmi_host_mem_chunks mem_chunks;
3078 } __packed;
3079
3080 struct wmi_init_cmd_10_2 {
3081 struct wmi_resource_config_10_2 resource_config;
3082 struct wmi_host_mem_chunks mem_chunks;
3083 } __packed;
3084
3085 struct wmi_init_cmd_10_4 {
3086 struct wmi_resource_config_10_4 resource_config;
3087 struct wmi_host_mem_chunks mem_chunks;
3088 } __packed;
3089
3090 struct wmi_chan_list_entry {
3091 __le16 freq;
3092 u8 phy_mode; /* valid for 10.2 only */
3093 u8 reserved;
3094 } __packed;
3095
3096 /* TLV for channel list */
3097 struct wmi_chan_list {
3098 __le32 tag; /* WMI_CHAN_LIST_TAG */
3099 __le32 num_chan;
3100 struct wmi_chan_list_entry channel_list[];
3101 } __packed;
3102
3103 struct wmi_bssid_list {
3104 __le32 tag; /* WMI_BSSID_LIST_TAG */
3105 __le32 num_bssid;
3106 struct wmi_mac_addr bssid_list[];
3107 } __packed;
3108
3109 struct wmi_ie_data {
3110 __le32 tag; /* WMI_IE_TAG */
3111 __le32 ie_len;
3112 u8 ie_data[];
3113 } __packed;
3114
3115 struct wmi_ssid {
3116 __le32 ssid_len;
3117 u8 ssid[32];
3118 } __packed;
3119
3120 struct wmi_ssid_list {
3121 __le32 tag; /* WMI_SSID_LIST_TAG */
3122 __le32 num_ssids;
3123 struct wmi_ssid ssids[];
3124 } __packed;
3125
3126 /* prefix used by scan requestor ids on the host */
3127 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
3128
3129 /* prefix used by scan request ids generated on the host */
3130 /* host cycles through the lower 12 bits to generate ids */
3131 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000
3132
3133 #define WLAN_SCAN_PARAMS_MAX_SSID 16
3134 #define WLAN_SCAN_PARAMS_MAX_BSSID 4
3135 #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256
3136
3137 /* Values lower than this may be refused by some firmware revisions with a scan
3138 * completion with a timedout reason.
3139 */
3140 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40
3141
3142 /* Scan priority numbers must be sequential, starting with 0 */
3143 enum wmi_scan_priority {
3144 WMI_SCAN_PRIORITY_VERY_LOW = 0,
3145 WMI_SCAN_PRIORITY_LOW,
3146 WMI_SCAN_PRIORITY_MEDIUM,
3147 WMI_SCAN_PRIORITY_HIGH,
3148 WMI_SCAN_PRIORITY_VERY_HIGH,
3149 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */
3150 };
3151
3152 struct wmi_start_scan_common {
3153 /* Scan ID */
3154 __le32 scan_id;
3155 /* Scan requestor ID */
3156 __le32 scan_req_id;
3157 /* VDEV id(interface) that is requesting scan */
3158 __le32 vdev_id;
3159 /* Scan Priority, input to scan scheduler */
3160 __le32 scan_priority;
3161 /* Scan events subscription */
3162 __le32 notify_scan_events;
3163 /* dwell time in msec on active channels */
3164 __le32 dwell_time_active;
3165 /* dwell time in msec on passive channels */
3166 __le32 dwell_time_passive;
3167 /*
3168 * min time in msec on the BSS channel,only valid if atleast one
3169 * VDEV is active
3170 */
3171 __le32 min_rest_time;
3172 /*
3173 * max rest time in msec on the BSS channel,only valid if at least
3174 * one VDEV is active
3175 */
3176 /*
3177 * the scanner will rest on the bss channel at least min_rest_time
3178 * after min_rest_time the scanner will start checking for tx/rx
3179 * activity on all VDEVs. if there is no activity the scanner will
3180 * switch to off channel. if there is activity the scanner will let
3181 * the radio on the bss channel until max_rest_time expires.at
3182 * max_rest_time scanner will switch to off channel irrespective of
3183 * activity. activity is determined by the idle_time parameter.
3184 */
3185 __le32 max_rest_time;
3186 /*
3187 * time before sending next set of probe requests.
3188 * The scanner keeps repeating probe requests transmission with
3189 * period specified by repeat_probe_time.
3190 * The number of probe requests specified depends on the ssid_list
3191 * and bssid_list
3192 */
3193 __le32 repeat_probe_time;
3194 /* time in msec between 2 consequetive probe requests with in a set. */
3195 __le32 probe_spacing_time;
3196 /*
3197 * data inactivity time in msec on bss channel that will be used by
3198 * scanner for measuring the inactivity.
3199 */
3200 __le32 idle_time;
3201 /* maximum time in msec allowed for scan */
3202 __le32 max_scan_time;
3203 /*
3204 * delay in msec before sending first probe request after switching
3205 * to a channel
3206 */
3207 __le32 probe_delay;
3208 /* Scan control flags */
3209 __le32 scan_ctrl_flags;
3210 } __packed;
3211
3212 struct wmi_start_scan_tlvs {
3213 /* TLV parameters. These includes channel list, ssid list, bssid list,
3214 * extra ies.
3215 */
3216 u8 tlvs[0];
3217 } __packed;
3218
3219 struct wmi_start_scan_cmd {
3220 struct wmi_start_scan_common common;
3221 __le32 burst_duration_ms;
3222 struct wmi_start_scan_tlvs tlvs;
3223 } __packed;
3224
3225 /* This is the definition from 10.X firmware branch */
3226 struct wmi_10x_start_scan_cmd {
3227 struct wmi_start_scan_common common;
3228 struct wmi_start_scan_tlvs tlvs;
3229 } __packed;
3230
3231 struct wmi_ssid_arg {
3232 int len;
3233 const u8 *ssid;
3234 };
3235
3236 struct wmi_bssid_arg {
3237 const u8 *bssid;
3238 };
3239
3240 struct wmi_start_scan_arg {
3241 u32 scan_id;
3242 u32 scan_req_id;
3243 u32 vdev_id;
3244 u32 scan_priority;
3245 u32 notify_scan_events;
3246 u32 dwell_time_active;
3247 u32 dwell_time_passive;
3248 u32 min_rest_time;
3249 u32 max_rest_time;
3250 u32 repeat_probe_time;
3251 u32 probe_spacing_time;
3252 u32 idle_time;
3253 u32 max_scan_time;
3254 u32 probe_delay;
3255 u32 scan_ctrl_flags;
3256 u32 burst_duration_ms;
3257
3258 u32 ie_len;
3259 u32 n_channels;
3260 u32 n_ssids;
3261 u32 n_bssids;
3262
3263 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN];
3264 u16 channels[64];
3265 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
3266 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
3267 struct wmi_mac_addr mac_addr;
3268 struct wmi_mac_addr mac_mask;
3269 };
3270
3271 /* scan control flags */
3272
3273 /* passively scan all channels including active channels */
3274 #define WMI_SCAN_FLAG_PASSIVE 0x1
3275 /* add wild card ssid probe request even though ssid_list is specified. */
3276 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2
3277 /* add cck rates to rates/xrate ie for the generated probe request */
3278 #define WMI_SCAN_ADD_CCK_RATES 0x4
3279 /* add ofdm rates to rates/xrate ie for the generated probe request */
3280 #define WMI_SCAN_ADD_OFDM_RATES 0x8
3281 /* To enable indication of Chan load and Noise floor to host */
3282 #define WMI_SCAN_CHAN_STAT_EVENT 0x10
3283 /* Filter Probe request frames */
3284 #define WMI_SCAN_FILTER_PROBE_REQ 0x20
3285 /* When set, DFS channels will not be scanned */
3286 #define WMI_SCAN_BYPASS_DFS_CHN 0x40
3287 /* Different FW scan engine may choose to bail out on errors.
3288 * Allow the driver to have influence over that.
3289 */
3290 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80
3291
3292 /* Use random MAC address for TA for Probe Request frame and add
3293 * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame.
3294 * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored.
3295 */
3296 #define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000
3297
3298 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
3299 #define WMI_SCAN_CLASS_MASK 0xFF000000
3300
3301 enum wmi_stop_scan_type {
3302 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */
3303 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */
3304 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */
3305 };
3306
3307 struct wmi_stop_scan_cmd {
3308 __le32 scan_req_id;
3309 __le32 scan_id;
3310 __le32 req_type;
3311 __le32 vdev_id;
3312 } __packed;
3313
3314 struct wmi_stop_scan_arg {
3315 u32 req_id;
3316 enum wmi_stop_scan_type req_type;
3317 union {
3318 u32 scan_id;
3319 u32 vdev_id;
3320 } u;
3321 };
3322
3323 struct wmi_scan_chan_list_cmd {
3324 __le32 num_scan_chans;
3325 struct wmi_channel chan_info[];
3326 } __packed;
3327
3328 struct wmi_scan_chan_list_arg {
3329 u32 n_channels;
3330 struct wmi_channel_arg *channels;
3331 };
3332
3333 enum wmi_bss_filter {
3334 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */
3335 WMI_BSS_FILTER_ALL, /* all beacons forwarded */
3336 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */
3337 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */
3338 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */
3339 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */
3340 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */
3341 WMI_BSS_FILTER_LAST_BSS, /* marker only */
3342 };
3343
3344 enum wmi_scan_event_type {
3345 WMI_SCAN_EVENT_STARTED = BIT(0),
3346 WMI_SCAN_EVENT_COMPLETED = BIT(1),
3347 WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2),
3348 WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3),
3349 WMI_SCAN_EVENT_DEQUEUED = BIT(4),
3350 /* possibly by high-prio scan */
3351 WMI_SCAN_EVENT_PREEMPTED = BIT(5),
3352 WMI_SCAN_EVENT_START_FAILED = BIT(6),
3353 WMI_SCAN_EVENT_RESTARTED = BIT(7),
3354 WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8),
3355 WMI_SCAN_EVENT_MAX = BIT(15),
3356 };
3357
3358 enum wmi_scan_completion_reason {
3359 WMI_SCAN_REASON_COMPLETED,
3360 WMI_SCAN_REASON_CANCELLED,
3361 WMI_SCAN_REASON_PREEMPTED,
3362 WMI_SCAN_REASON_TIMEDOUT,
3363 WMI_SCAN_REASON_INTERNAL_FAILURE,
3364 WMI_SCAN_REASON_MAX,
3365 };
3366
3367 struct wmi_scan_event {
3368 __le32 event_type; /* %WMI_SCAN_EVENT_ */
3369 __le32 reason; /* %WMI_SCAN_REASON_ */
3370 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
3371 __le32 scan_req_id;
3372 __le32 scan_id;
3373 __le32 vdev_id;
3374 } __packed;
3375
3376 /*
3377 * This defines how much headroom is kept in the
3378 * receive frame between the descriptor and the
3379 * payload, in order for the WMI PHY error and
3380 * management handler to insert header contents.
3381 *
3382 * This is in bytes.
3383 */
3384 #define WMI_MGMT_RX_HDR_HEADROOM 52
3385
3386 /*
3387 * This event will be used for sending scan results
3388 * as well as rx mgmt frames to the host. The rx buffer
3389 * will be sent as part of this WMI event. It would be a
3390 * good idea to pass all the fields in the RX status
3391 * descriptor up to the host.
3392 */
3393 struct wmi_mgmt_rx_hdr_v1 {
3394 __le32 channel;
3395 __le32 snr;
3396 __le32 rate;
3397 __le32 phy_mode;
3398 __le32 buf_len;
3399 __le32 status; /* %WMI_RX_STATUS_ */
3400 } __packed;
3401
3402 struct wmi_mgmt_rx_hdr_v2 {
3403 struct wmi_mgmt_rx_hdr_v1 v1;
3404 __le32 rssi_ctl[4];
3405 } __packed;
3406
3407 struct wmi_mgmt_rx_event_v1 {
3408 struct wmi_mgmt_rx_hdr_v1 hdr;
3409 u8 buf[];
3410 } __packed;
3411
3412 struct wmi_mgmt_rx_event_v2 {
3413 struct wmi_mgmt_rx_hdr_v2 hdr;
3414 u8 buf[];
3415 } __packed;
3416
3417 struct wmi_10_4_mgmt_rx_hdr {
3418 __le32 channel;
3419 __le32 snr;
3420 u8 rssi_ctl[4];
3421 __le32 rate;
3422 __le32 phy_mode;
3423 __le32 buf_len;
3424 __le32 status;
3425 } __packed;
3426
3427 struct wmi_10_4_mgmt_rx_event {
3428 struct wmi_10_4_mgmt_rx_hdr hdr;
3429 u8 buf[];
3430 } __packed;
3431
3432 struct wmi_mgmt_rx_ext_info {
3433 __le64 rx_mac_timestamp;
3434 } __packed __aligned(4);
3435
3436 #define WMI_RX_STATUS_OK 0x00
3437 #define WMI_RX_STATUS_ERR_CRC 0x01
3438 #define WMI_RX_STATUS_ERR_DECRYPT 0x08
3439 #define WMI_RX_STATUS_ERR_MIC 0x10
3440 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20
3441 /* Extension data at the end of mgmt frame */
3442 #define WMI_RX_STATUS_EXT_INFO 0x40
3443
3444 #define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26
3445 #define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24
3446 #define PHY_ERROR_GEN_RADAR 0x05
3447
3448 #define PHY_ERROR_10_4_RADAR_MASK 0x4
3449 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000
3450
3451 enum phy_err_type {
3452 PHY_ERROR_UNKNOWN,
3453 PHY_ERROR_SPECTRAL_SCAN,
3454 PHY_ERROR_FALSE_RADAR_EXT,
3455 PHY_ERROR_RADAR
3456 };
3457
3458 struct wmi_phyerr {
3459 __le32 tsf_timestamp;
3460 __le16 freq1;
3461 __le16 freq2;
3462 u8 rssi_combined;
3463 u8 chan_width_mhz;
3464 u8 phy_err_code;
3465 u8 rsvd0;
3466 __le32 rssi_chains[4];
3467 __le16 nf_chains[4];
3468 __le32 buf_len;
3469 u8 buf[];
3470 } __packed;
3471
3472 struct wmi_phyerr_event {
3473 __le32 num_phyerrs;
3474 __le32 tsf_l32;
3475 __le32 tsf_u32;
3476 struct wmi_phyerr phyerrs[];
3477 } __packed;
3478
3479 struct wmi_10_4_phyerr_event {
3480 __le32 tsf_l32;
3481 __le32 tsf_u32;
3482 __le16 freq1;
3483 __le16 freq2;
3484 u8 rssi_combined;
3485 u8 chan_width_mhz;
3486 u8 phy_err_code;
3487 u8 rsvd0;
3488 __le32 rssi_chains[4];
3489 __le16 nf_chains[4];
3490 __le32 phy_err_mask[2];
3491 __le32 tsf_timestamp;
3492 __le32 buf_len;
3493 u8 buf[];
3494 } __packed;
3495
3496 struct wmi_radar_found_info {
3497 __le32 pri_min;
3498 __le32 pri_max;
3499 __le32 width_min;
3500 __le32 width_max;
3501 __le32 sidx_min;
3502 __le32 sidx_max;
3503 } __packed;
3504
3505 enum wmi_radar_confirmation_status {
3506 /* Detected radar was due to SW pulses */
3507 WMI_SW_RADAR_DETECTED = 0,
3508
3509 WMI_RADAR_DETECTION_FAIL = 1,
3510
3511 /* Real radar detected */
3512 WMI_HW_RADAR_DETECTED = 2,
3513 };
3514
3515 #define PHYERR_TLV_SIG 0xBB
3516 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB
3517 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8
3518 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9
3519
3520 struct phyerr_radar_report {
3521 __le32 reg0; /* RADAR_REPORT_REG0_* */
3522 __le32 reg1; /* RADAR_REPORT_REG1_* */
3523 } __packed;
3524
3525 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000
3526 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31
3527
3528 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000
3529 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30
3530
3531 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000
3532 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20
3533
3534 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000
3535 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16
3536
3537 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00
3538 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10
3539
3540 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF
3541 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0
3542
3543 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000
3544 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31
3545
3546 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000
3547 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24
3548
3549 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000
3550 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16
3551
3552 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00
3553 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8
3554
3555 #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF
3556 #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0
3557
3558 struct phyerr_fft_report {
3559 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */
3560 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */
3561 } __packed;
3562
3563 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000
3564 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23
3565
3566 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000
3567 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14
3568
3569 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000
3570 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12
3571
3572 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF
3573 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0
3574
3575 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000
3576 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26
3577
3578 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000
3579 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18
3580
3581 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00
3582 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8
3583
3584 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF
3585 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0
3586
3587 struct phyerr_tlv {
3588 __le16 len;
3589 u8 tag;
3590 u8 sig;
3591 } __packed;
3592
3593 #define DFS_RSSI_POSSIBLY_FALSE 50
3594 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40
3595
3596 struct wmi_mgmt_tx_hdr {
3597 __le32 vdev_id;
3598 struct wmi_mac_addr peer_macaddr;
3599 __le32 tx_rate;
3600 __le32 tx_power;
3601 __le32 buf_len;
3602 } __packed;
3603
3604 struct wmi_mgmt_tx_cmd {
3605 struct wmi_mgmt_tx_hdr hdr;
3606 u8 buf[];
3607 } __packed;
3608
3609 struct wmi_echo_event {
3610 __le32 value;
3611 } __packed;
3612
3613 struct wmi_echo_cmd {
3614 __le32 value;
3615 } __packed;
3616
3617 struct wmi_pdev_set_regdomain_cmd {
3618 __le32 reg_domain;
3619 __le32 reg_domain_2G;
3620 __le32 reg_domain_5G;
3621 __le32 conformance_test_limit_2G;
3622 __le32 conformance_test_limit_5G;
3623 } __packed;
3624
3625 enum wmi_dfs_region {
3626 /* Uninitialized dfs domain */
3627 WMI_UNINIT_DFS_DOMAIN = 0,
3628
3629 /* FCC3 dfs domain */
3630 WMI_FCC_DFS_DOMAIN = 1,
3631
3632 /* ETSI dfs domain */
3633 WMI_ETSI_DFS_DOMAIN = 2,
3634
3635 /*Japan dfs domain */
3636 WMI_MKK4_DFS_DOMAIN = 3,
3637 };
3638
3639 struct wmi_pdev_set_regdomain_cmd_10x {
3640 __le32 reg_domain;
3641 __le32 reg_domain_2G;
3642 __le32 reg_domain_5G;
3643 __le32 conformance_test_limit_2G;
3644 __le32 conformance_test_limit_5G;
3645
3646 /* dfs domain from wmi_dfs_region */
3647 __le32 dfs_domain;
3648 } __packed;
3649
3650 /* Command to set/unset chip in quiet mode */
3651 struct wmi_pdev_set_quiet_cmd {
3652 /* period in TUs */
3653 __le32 period;
3654
3655 /* duration in TUs */
3656 __le32 duration;
3657
3658 /* offset in TUs */
3659 __le32 next_start;
3660
3661 /* enable/disable */
3662 __le32 enabled;
3663 } __packed;
3664
3665 /*
3666 * 802.11g protection mode.
3667 */
3668 enum ath10k_protmode {
3669 ATH10K_PROT_NONE = 0, /* no protection */
3670 ATH10K_PROT_CTSONLY = 1, /* CTS to self */
3671 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */
3672 };
3673
3674 enum wmi_rtscts_profile {
3675 WMI_RTSCTS_FOR_NO_RATESERIES = 0,
3676 WMI_RTSCTS_FOR_SECOND_RATESERIES,
3677 WMI_RTSCTS_ACROSS_SW_RETRIES
3678 };
3679
3680 #define WMI_RTSCTS_ENABLED 1
3681 #define WMI_RTSCTS_SET_MASK 0x0f
3682 #define WMI_RTSCTS_SET_LSB 0
3683
3684 #define WMI_RTSCTS_PROFILE_MASK 0xf0
3685 #define WMI_RTSCTS_PROFILE_LSB 4
3686
3687 enum wmi_beacon_gen_mode {
3688 WMI_BEACON_STAGGERED_MODE = 0,
3689 WMI_BEACON_BURST_MODE = 1
3690 };
3691
3692 enum wmi_csa_event_ies_present_flag {
3693 WMI_CSA_IE_PRESENT = 0x00000001,
3694 WMI_XCSA_IE_PRESENT = 0x00000002,
3695 WMI_WBW_IE_PRESENT = 0x00000004,
3696 WMI_CSWARP_IE_PRESENT = 0x00000008,
3697 };
3698
3699 /* wmi CSA receive event from beacon frame */
3700 struct wmi_csa_event {
3701 __le32 i_fc_dur;
3702 /* Bit 0-15: FC */
3703 /* Bit 16-31: DUR */
3704 struct wmi_mac_addr i_addr1;
3705 struct wmi_mac_addr i_addr2;
3706 __le32 csa_ie[2];
3707 __le32 xcsa_ie[2];
3708 __le32 wb_ie[2];
3709 __le32 cswarp_ie;
3710 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */
3711 } __packed;
3712
3713 /* the definition of different PDEV parameters */
3714 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500
3715 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500
3716 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500
3717
3718 struct wmi_pdev_param_map {
3719 u32 tx_chain_mask;
3720 u32 rx_chain_mask;
3721 u32 txpower_limit2g;
3722 u32 txpower_limit5g;
3723 u32 txpower_scale;
3724 u32 beacon_gen_mode;
3725 u32 beacon_tx_mode;
3726 u32 resmgr_offchan_mode;
3727 u32 protection_mode;
3728 u32 dynamic_bw;
3729 u32 non_agg_sw_retry_th;
3730 u32 agg_sw_retry_th;
3731 u32 sta_kickout_th;
3732 u32 ac_aggrsize_scaling;
3733 u32 ltr_enable;
3734 u32 ltr_ac_latency_be;
3735 u32 ltr_ac_latency_bk;
3736 u32 ltr_ac_latency_vi;
3737 u32 ltr_ac_latency_vo;
3738 u32 ltr_ac_latency_timeout;
3739 u32 ltr_sleep_override;
3740 u32 ltr_rx_override;
3741 u32 ltr_tx_activity_timeout;
3742 u32 l1ss_enable;
3743 u32 dsleep_enable;
3744 u32 pcielp_txbuf_flush;
3745 u32 pcielp_txbuf_watermark;
3746 u32 pcielp_txbuf_tmo_en;
3747 u32 pcielp_txbuf_tmo_value;
3748 u32 pdev_stats_update_period;
3749 u32 vdev_stats_update_period;
3750 u32 peer_stats_update_period;
3751 u32 bcnflt_stats_update_period;
3752 u32 pmf_qos;
3753 u32 arp_ac_override;
3754 u32 dcs;
3755 u32 ani_enable;
3756 u32 ani_poll_period;
3757 u32 ani_listen_period;
3758 u32 ani_ofdm_level;
3759 u32 ani_cck_level;
3760 u32 dyntxchain;
3761 u32 proxy_sta;
3762 u32 idle_ps_config;
3763 u32 power_gating_sleep;
3764 u32 fast_channel_reset;
3765 u32 burst_dur;
3766 u32 burst_enable;
3767 u32 cal_period;
3768 u32 aggr_burst;
3769 u32 rx_decap_mode;
3770 u32 smart_antenna_default_antenna;
3771 u32 igmpmld_override;
3772 u32 igmpmld_tid;
3773 u32 antenna_gain;
3774 u32 rx_filter;
3775 u32 set_mcast_to_ucast_tid;
3776 u32 proxy_sta_mode;
3777 u32 set_mcast2ucast_mode;
3778 u32 set_mcast2ucast_buffer;
3779 u32 remove_mcast2ucast_buffer;
3780 u32 peer_sta_ps_statechg_enable;
3781 u32 igmpmld_ac_override;
3782 u32 block_interbss;
3783 u32 set_disable_reset_cmdid;
3784 u32 set_msdu_ttl_cmdid;
3785 u32 set_ppdu_duration_cmdid;
3786 u32 txbf_sound_period_cmdid;
3787 u32 set_promisc_mode_cmdid;
3788 u32 set_burst_mode_cmdid;
3789 u32 en_stats;
3790 u32 mu_group_policy;
3791 u32 noise_detection;
3792 u32 noise_threshold;
3793 u32 dpd_enable;
3794 u32 set_mcast_bcast_echo;
3795 u32 atf_strict_sch;
3796 u32 atf_sched_duration;
3797 u32 ant_plzn;
3798 u32 mgmt_retry_limit;
3799 u32 sensitivity_level;
3800 u32 signed_txpower_2g;
3801 u32 signed_txpower_5g;
3802 u32 enable_per_tid_amsdu;
3803 u32 enable_per_tid_ampdu;
3804 u32 cca_threshold;
3805 u32 rts_fixed_rate;
3806 u32 pdev_reset;
3807 u32 wapi_mbssid_offset;
3808 u32 arp_srcaddr;
3809 u32 arp_dstaddr;
3810 u32 enable_btcoex;
3811 u32 rfkill_config;
3812 u32 rfkill_enable;
3813 u32 peer_stats_info_enable;
3814 };
3815
3816 #define WMI_PDEV_PARAM_UNSUPPORTED 0
3817
3818 enum wmi_pdev_param {
3819 /* TX chain mask */
3820 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3821 /* RX chain mask */
3822 WMI_PDEV_PARAM_RX_CHAIN_MASK,
3823 /* TX power limit for 2G Radio */
3824 WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
3825 /* TX power limit for 5G Radio */
3826 WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
3827 /* TX power scale */
3828 WMI_PDEV_PARAM_TXPOWER_SCALE,
3829 /* Beacon generation mode . 0: host, 1: target */
3830 WMI_PDEV_PARAM_BEACON_GEN_MODE,
3831 /* Beacon generation mode . 0: staggered 1: bursted */
3832 WMI_PDEV_PARAM_BEACON_TX_MODE,
3833 /*
3834 * Resource manager off chan mode .
3835 * 0: turn off off chan mode. 1: turn on offchan mode
3836 */
3837 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3838 /*
3839 * Protection mode:
3840 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3841 */
3842 WMI_PDEV_PARAM_PROTECTION_MODE,
3843 /*
3844 * Dynamic bandwidth - 0: disable, 1: enable
3845 *
3846 * When enabled HW rate control tries different bandwidths when
3847 * retransmitting frames.
3848 */
3849 WMI_PDEV_PARAM_DYNAMIC_BW,
3850 /* Non aggregrate/ 11g sw retry threshold.0-disable */
3851 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3852 /* aggregrate sw retry threshold. 0-disable*/
3853 WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
3854 /* Station kickout threshold (non of consecutive failures).0-disable */
3855 WMI_PDEV_PARAM_STA_KICKOUT_TH,
3856 /* Aggerate size scaling configuration per AC */
3857 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3858 /* LTR enable */
3859 WMI_PDEV_PARAM_LTR_ENABLE,
3860 /* LTR latency for BE, in us */
3861 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
3862 /* LTR latency for BK, in us */
3863 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
3864 /* LTR latency for VI, in us */
3865 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
3866 /* LTR latency for VO, in us */
3867 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
3868 /* LTR AC latency timeout, in ms */
3869 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3870 /* LTR platform latency override, in us */
3871 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3872 /* LTR-RX override, in us */
3873 WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
3874 /* Tx activity timeout for LTR, in us */
3875 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3876 /* L1SS state machine enable */
3877 WMI_PDEV_PARAM_L1SS_ENABLE,
3878 /* Deep sleep state machine enable */
3879 WMI_PDEV_PARAM_DSLEEP_ENABLE,
3880 /* RX buffering flush enable */
3881 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
3882 /* RX buffering matermark */
3883 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
3884 /* RX buffering timeout enable */
3885 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
3886 /* RX buffering timeout value */
3887 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
3888 /* pdev level stats update period in ms */
3889 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3890 /* vdev level stats update period in ms */
3891 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3892 /* peer level stats update period in ms */
3893 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3894 /* beacon filter status update period */
3895 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3896 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3897 WMI_PDEV_PARAM_PMF_QOS,
3898 /* Access category on which ARP frames are sent */
3899 WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
3900 /* DCS configuration */
3901 WMI_PDEV_PARAM_DCS,
3902 /* Enable/Disable ANI on target */
3903 WMI_PDEV_PARAM_ANI_ENABLE,
3904 /* configure the ANI polling period */
3905 WMI_PDEV_PARAM_ANI_POLL_PERIOD,
3906 /* configure the ANI listening period */
3907 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
3908 /* configure OFDM immunity level */
3909 WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
3910 /* configure CCK immunity level */
3911 WMI_PDEV_PARAM_ANI_CCK_LEVEL,
3912 /* Enable/Disable CDD for 1x1 STAs in rate control module */
3913 WMI_PDEV_PARAM_DYNTXCHAIN,
3914 /* Enable/Disable proxy STA */
3915 WMI_PDEV_PARAM_PROXY_STA,
3916 /* Enable/Disable low power state when all VDEVs are inactive/idle. */
3917 WMI_PDEV_PARAM_IDLE_PS_CONFIG,
3918 /* Enable/Disable power gating sleep */
3919 WMI_PDEV_PARAM_POWER_GATING_SLEEP,
3920 };
3921
3922 enum wmi_10x_pdev_param {
3923 /* TX chian mask */
3924 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3925 /* RX chian mask */
3926 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
3927 /* TX power limit for 2G Radio */
3928 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
3929 /* TX power limit for 5G Radio */
3930 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
3931 /* TX power scale */
3932 WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
3933 /* Beacon generation mode . 0: host, 1: target */
3934 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
3935 /* Beacon generation mode . 0: staggered 1: bursted */
3936 WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
3937 /*
3938 * Resource manager off chan mode .
3939 * 0: turn off off chan mode. 1: turn on offchan mode
3940 */
3941 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3942 /*
3943 * Protection mode:
3944 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3945 */
3946 WMI_10X_PDEV_PARAM_PROTECTION_MODE,
3947 /* Dynamic bandwidth 0: disable 1: enable */
3948 WMI_10X_PDEV_PARAM_DYNAMIC_BW,
3949 /* Non aggregrate/ 11g sw retry threshold.0-disable */
3950 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3951 /* aggregrate sw retry threshold. 0-disable*/
3952 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
3953 /* Station kickout threshold (non of consecutive failures).0-disable */
3954 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
3955 /* Aggerate size scaling configuration per AC */
3956 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3957 /* LTR enable */
3958 WMI_10X_PDEV_PARAM_LTR_ENABLE,
3959 /* LTR latency for BE, in us */
3960 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
3961 /* LTR latency for BK, in us */
3962 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
3963 /* LTR latency for VI, in us */
3964 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
3965 /* LTR latency for VO, in us */
3966 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
3967 /* LTR AC latency timeout, in ms */
3968 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3969 /* LTR platform latency override, in us */
3970 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3971 /* LTR-RX override, in us */
3972 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
3973 /* Tx activity timeout for LTR, in us */
3974 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3975 /* L1SS state machine enable */
3976 WMI_10X_PDEV_PARAM_L1SS_ENABLE,
3977 /* Deep sleep state machine enable */
3978 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
3979 /* pdev level stats update period in ms */
3980 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3981 /* vdev level stats update period in ms */
3982 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3983 /* peer level stats update period in ms */
3984 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3985 /* beacon filter status update period */
3986 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3987 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3988 WMI_10X_PDEV_PARAM_PMF_QOS,
3989 /* Access category on which ARP and DHCP frames are sent */
3990 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
3991 /* DCS configuration */
3992 WMI_10X_PDEV_PARAM_DCS,
3993 /* Enable/Disable ANI on target */
3994 WMI_10X_PDEV_PARAM_ANI_ENABLE,
3995 /* configure the ANI polling period */
3996 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
3997 /* configure the ANI listening period */
3998 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
3999 /* configure OFDM immunity level */
4000 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
4001 /* configure CCK immunity level */
4002 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
4003 /* Enable/Disable CDD for 1x1 STAs in rate control module */
4004 WMI_10X_PDEV_PARAM_DYNTXCHAIN,
4005 /* Enable/Disable Fast channel reset*/
4006 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
4007 /* Set Bursting DUR */
4008 WMI_10X_PDEV_PARAM_BURST_DUR,
4009 /* Set Bursting Enable*/
4010 WMI_10X_PDEV_PARAM_BURST_ENABLE,
4011
4012 /* following are available as of firmware 10.2 */
4013 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4014 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE,
4015 WMI_10X_PDEV_PARAM_IGMPMLD_TID,
4016 WMI_10X_PDEV_PARAM_ANTENNA_GAIN,
4017 WMI_10X_PDEV_PARAM_RX_DECAP_MODE,
4018 WMI_10X_PDEV_PARAM_RX_FILTER,
4019 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID,
4020 WMI_10X_PDEV_PARAM_PROXY_STA_MODE,
4021 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4022 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4023 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4024 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE,
4025 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE,
4026 WMI_10X_PDEV_PARAM_CAL_PERIOD,
4027 WMI_10X_PDEV_PARAM_ATF_STRICT_SCH,
4028 WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION,
4029 WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4030 WMI_10X_PDEV_PARAM_PDEV_RESET
4031 };
4032
4033 enum wmi_10_4_pdev_param {
4034 WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
4035 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK,
4036 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G,
4037 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G,
4038 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE,
4039 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE,
4040 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE,
4041 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
4042 WMI_10_4_PDEV_PARAM_PROTECTION_MODE,
4043 WMI_10_4_PDEV_PARAM_DYNAMIC_BW,
4044 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
4045 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH,
4046 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH,
4047 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING,
4048 WMI_10_4_PDEV_PARAM_LTR_ENABLE,
4049 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE,
4050 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK,
4051 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI,
4052 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO,
4053 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
4054 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
4055 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE,
4056 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
4057 WMI_10_4_PDEV_PARAM_L1SS_ENABLE,
4058 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE,
4059 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
4060 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
4061 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
4062 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
4063 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
4064 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
4065 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
4066 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
4067 WMI_10_4_PDEV_PARAM_PMF_QOS,
4068 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE,
4069 WMI_10_4_PDEV_PARAM_DCS,
4070 WMI_10_4_PDEV_PARAM_ANI_ENABLE,
4071 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD,
4072 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD,
4073 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL,
4074 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL,
4075 WMI_10_4_PDEV_PARAM_DYNTXCHAIN,
4076 WMI_10_4_PDEV_PARAM_PROXY_STA,
4077 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG,
4078 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP,
4079 WMI_10_4_PDEV_PARAM_AGGR_BURST,
4080 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE,
4081 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET,
4082 WMI_10_4_PDEV_PARAM_BURST_DUR,
4083 WMI_10_4_PDEV_PARAM_BURST_ENABLE,
4084 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4085 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE,
4086 WMI_10_4_PDEV_PARAM_IGMPMLD_TID,
4087 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN,
4088 WMI_10_4_PDEV_PARAM_RX_FILTER,
4089 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID,
4090 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE,
4091 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4092 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4093 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4094 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE,
4095 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,
4096 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS,
4097 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID,
4098 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID,
4099 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID,
4100 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,
4101 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4102 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID,
4103 WMI_10_4_PDEV_PARAM_EN_STATS,
4104 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY,
4105 WMI_10_4_PDEV_PARAM_NOISE_DETECTION,
4106 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD,
4107 WMI_10_4_PDEV_PARAM_DPD_ENABLE,
4108 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO,
4109 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH,
4110 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION,
4111 WMI_10_4_PDEV_PARAM_ANT_PLZN,
4112 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT,
4113 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL,
4114 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G,
4115 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G,
4116 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU,
4117 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU,
4118 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD,
4119 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE,
4120 WMI_10_4_PDEV_PARAM_CAL_PERIOD,
4121 WMI_10_4_PDEV_PARAM_PDEV_RESET,
4122 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET,
4123 WMI_10_4_PDEV_PARAM_ARP_SRCADDR,
4124 WMI_10_4_PDEV_PARAM_ARP_DSTADDR,
4125 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB,
4126 WMI_10_4_PDEV_PARAM_RX_BATCHMODE,
4127 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY,
4128 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH,
4129 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,
4130 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE,
4131 WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE,
4132 WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY,
4133 WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX,
4134 };
4135
4136 struct wmi_pdev_set_param_cmd {
4137 __le32 param_id;
4138 __le32 param_value;
4139 } __packed;
4140
4141 struct wmi_pdev_set_base_macaddr_cmd {
4142 struct wmi_mac_addr mac_addr;
4143 } __packed;
4144
4145 /* valid period is 1 ~ 60000ms, unit in millisecond */
4146 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000
4147
4148 struct wmi_pdev_get_tpc_config_cmd {
4149 /* parameter */
4150 __le32 param;
4151 } __packed;
4152
4153 #define WMI_TPC_CONFIG_PARAM 1
4154 #define WMI_TPC_FINAL_RATE_MAX 240
4155 #define WMI_TPC_TX_N_CHAIN 4
4156 #define WMI_TPC_RATE_MAX (WMI_TPC_TX_N_CHAIN * 65)
4157 #define WMI_TPC_PREAM_TABLE_MAX 10
4158 #define WMI_TPC_FLAG 3
4159 #define WMI_TPC_BUF_SIZE 10
4160 #define WMI_TPC_BEAMFORMING 2
4161
4162 enum wmi_tpc_table_type {
4163 WMI_TPC_TABLE_TYPE_CDD = 0,
4164 WMI_TPC_TABLE_TYPE_STBC = 1,
4165 WMI_TPC_TABLE_TYPE_TXBF = 2,
4166 };
4167
4168 enum wmi_tpc_config_event_flag {
4169 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1,
4170 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2,
4171 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4,
4172 };
4173
4174 struct wmi_pdev_tpc_config_event {
4175 __le32 reg_domain;
4176 __le32 chan_freq;
4177 __le32 phy_mode;
4178 __le32 twice_antenna_reduction;
4179 __le32 twice_max_rd_power;
4180 a_sle32 twice_antenna_gain;
4181 __le32 power_limit;
4182 __le32 rate_max;
4183 __le32 num_tx_chain;
4184 __le32 ctl;
4185 __le32 flags;
4186 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4187 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4188 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4189 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4190 u8 rates_array[WMI_TPC_RATE_MAX];
4191 } __packed;
4192
4193 /* Transmit power scale factor. */
4194 enum wmi_tp_scale {
4195 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */
4196 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */
4197 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */
4198 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */
4199 WMI_TP_SCALE_MIN = 4, /* min, but still on */
4200 WMI_TP_SCALE_SIZE = 5, /* max num of enum */
4201 };
4202
4203 struct wmi_pdev_tpc_final_table_event {
4204 __le32 reg_domain;
4205 __le32 chan_freq;
4206 __le32 phy_mode;
4207 __le32 twice_antenna_reduction;
4208 __le32 twice_max_rd_power;
4209 a_sle32 twice_antenna_gain;
4210 __le32 power_limit;
4211 __le32 rate_max;
4212 __le32 num_tx_chain;
4213 __le32 ctl;
4214 __le32 flags;
4215 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4216 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4217 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4218 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4219 u8 rates_array[WMI_TPC_FINAL_RATE_MAX];
4220 u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN]
4221 [WMI_TPC_TX_N_CHAIN];
4222 } __packed;
4223
4224 struct wmi_pdev_get_tpc_table_cmd {
4225 __le32 param;
4226 } __packed;
4227
4228 enum wmi_tpc_pream_2ghz {
4229 WMI_TPC_PREAM_2GHZ_CCK = 0,
4230 WMI_TPC_PREAM_2GHZ_OFDM,
4231 WMI_TPC_PREAM_2GHZ_HT20,
4232 WMI_TPC_PREAM_2GHZ_HT40,
4233 WMI_TPC_PREAM_2GHZ_VHT20,
4234 WMI_TPC_PREAM_2GHZ_VHT40,
4235 WMI_TPC_PREAM_2GHZ_VHT80,
4236 };
4237
4238 enum wmi_tpc_pream_5ghz {
4239 WMI_TPC_PREAM_5GHZ_OFDM = 1,
4240 WMI_TPC_PREAM_5GHZ_HT20,
4241 WMI_TPC_PREAM_5GHZ_HT40,
4242 WMI_TPC_PREAM_5GHZ_VHT20,
4243 WMI_TPC_PREAM_5GHZ_VHT40,
4244 WMI_TPC_PREAM_5GHZ_VHT80,
4245 WMI_TPC_PREAM_5GHZ_HTCUP,
4246 };
4247
4248 #define WMI_PEER_PS_STATE_DISABLED 2
4249
4250 struct wmi_peer_sta_ps_state_chg_event {
4251 struct wmi_mac_addr peer_macaddr;
4252 __le32 peer_ps_state;
4253 } __packed;
4254
4255 struct wmi_pdev_chanlist_update_event {
4256 /* number of channels */
4257 __le32 num_chan;
4258 /* array of channels */
4259 struct wmi_channel channel_list[1];
4260 } __packed;
4261
4262 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32)
4263
4264 struct wmi_debug_mesg_event {
4265 /* message buffer, NULL terminated */
4266 char bufp[WMI_MAX_DEBUG_MESG];
4267 } __packed;
4268
4269 enum {
4270 /* P2P device */
4271 VDEV_SUBTYPE_P2PDEV = 0,
4272 /* P2P client */
4273 VDEV_SUBTYPE_P2PCLI,
4274 /* P2P GO */
4275 VDEV_SUBTYPE_P2PGO,
4276 /* BT3.0 HS */
4277 VDEV_SUBTYPE_BT,
4278 };
4279
4280 struct wmi_pdev_set_channel_cmd {
4281 /* idnore power , only use flags , mode and freq */
4282 struct wmi_channel chan;
4283 } __packed;
4284
4285 struct wmi_pdev_pktlog_enable_cmd {
4286 __le32 ev_bitmap;
4287 } __packed;
4288
4289 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */
4290 #define WMI_DSCP_MAP_MAX (64)
4291 struct wmi_pdev_set_dscp_tid_map_cmd {
4292 /* map indicating DSCP to TID conversion */
4293 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];
4294 } __packed;
4295
4296 enum mcast_bcast_rate_id {
4297 WMI_SET_MCAST_RATE,
4298 WMI_SET_BCAST_RATE
4299 };
4300
4301 struct mcast_bcast_rate {
4302 enum mcast_bcast_rate_id rate_id;
4303 __le32 rate;
4304 } __packed;
4305
4306 struct wmi_wmm_params {
4307 __le32 cwmin;
4308 __le32 cwmax;
4309 __le32 aifs;
4310 __le32 txop;
4311 __le32 acm;
4312 __le32 no_ack;
4313 } __packed;
4314
4315 struct wmi_pdev_set_wmm_params {
4316 struct wmi_wmm_params ac_be;
4317 struct wmi_wmm_params ac_bk;
4318 struct wmi_wmm_params ac_vi;
4319 struct wmi_wmm_params ac_vo;
4320 } __packed;
4321
4322 struct wmi_wmm_params_arg {
4323 u32 cwmin;
4324 u32 cwmax;
4325 u32 aifs;
4326 u32 txop;
4327 u32 acm;
4328 u32 no_ack;
4329 };
4330
4331 struct wmi_wmm_params_all_arg {
4332 struct wmi_wmm_params_arg ac_be;
4333 struct wmi_wmm_params_arg ac_bk;
4334 struct wmi_wmm_params_arg ac_vi;
4335 struct wmi_wmm_params_arg ac_vo;
4336 };
4337
4338 struct wmi_pdev_stats_tx {
4339 /* Num HTT cookies queued to dispatch list */
4340 __le32 comp_queued;
4341
4342 /* Num HTT cookies dispatched */
4343 __le32 comp_delivered;
4344
4345 /* Num MSDU queued to WAL */
4346 __le32 msdu_enqued;
4347
4348 /* Num MPDU queue to WAL */
4349 __le32 mpdu_enqued;
4350
4351 /* Num MSDUs dropped by WMM limit */
4352 __le32 wmm_drop;
4353
4354 /* Num Local frames queued */
4355 __le32 local_enqued;
4356
4357 /* Num Local frames done */
4358 __le32 local_freed;
4359
4360 /* Num queued to HW */
4361 __le32 hw_queued;
4362
4363 /* Num PPDU reaped from HW */
4364 __le32 hw_reaped;
4365
4366 /* Num underruns */
4367 __le32 underrun;
4368
4369 /* Num PPDUs cleaned up in TX abort */
4370 __le32 tx_abort;
4371
4372 /* Num MPDUs requed by SW */
4373 __le32 mpdus_requed;
4374
4375 /* excessive retries */
4376 __le32 tx_ko;
4377
4378 /* data hw rate code */
4379 __le32 data_rc;
4380
4381 /* Scheduler self triggers */
4382 __le32 self_triggers;
4383
4384 /* frames dropped due to excessive sw retries */
4385 __le32 sw_retry_failure;
4386
4387 /* illegal rate phy errors */
4388 __le32 illgl_rate_phy_err;
4389
4390 /* wal pdev continuous xretry */
4391 __le32 pdev_cont_xretry;
4392
4393 /* wal pdev continous xretry */
4394 __le32 pdev_tx_timeout;
4395
4396 /* wal pdev resets */
4397 __le32 pdev_resets;
4398
4399 /* frames dropped due to non-availability of stateless TIDs */
4400 __le32 stateless_tid_alloc_failure;
4401
4402 __le32 phy_underrun;
4403
4404 /* MPDU is more than txop limit */
4405 __le32 txop_ovf;
4406 } __packed;
4407
4408 struct wmi_10_4_pdev_stats_tx {
4409 /* Num HTT cookies queued to dispatch list */
4410 __le32 comp_queued;
4411
4412 /* Num HTT cookies dispatched */
4413 __le32 comp_delivered;
4414
4415 /* Num MSDU queued to WAL */
4416 __le32 msdu_enqued;
4417
4418 /* Num MPDU queue to WAL */
4419 __le32 mpdu_enqued;
4420
4421 /* Num MSDUs dropped by WMM limit */
4422 __le32 wmm_drop;
4423
4424 /* Num Local frames queued */
4425 __le32 local_enqued;
4426
4427 /* Num Local frames done */
4428 __le32 local_freed;
4429
4430 /* Num queued to HW */
4431 __le32 hw_queued;
4432
4433 /* Num PPDU reaped from HW */
4434 __le32 hw_reaped;
4435
4436 /* Num underruns */
4437 __le32 underrun;
4438
4439 /* HW Paused. */
4440 __le32 hw_paused;
4441
4442 /* Num PPDUs cleaned up in TX abort */
4443 __le32 tx_abort;
4444
4445 /* Num MPDUs requed by SW */
4446 __le32 mpdus_requed;
4447
4448 /* excessive retries */
4449 __le32 tx_ko;
4450
4451 /* data hw rate code */
4452 __le32 data_rc;
4453
4454 /* Scheduler self triggers */
4455 __le32 self_triggers;
4456
4457 /* frames dropped due to excessive sw retries */
4458 __le32 sw_retry_failure;
4459
4460 /* illegal rate phy errors */
4461 __le32 illgl_rate_phy_err;
4462
4463 /* wal pdev continuous xretry */
4464 __le32 pdev_cont_xretry;
4465
4466 /* wal pdev tx timeouts */
4467 __le32 pdev_tx_timeout;
4468
4469 /* wal pdev resets */
4470 __le32 pdev_resets;
4471
4472 /* frames dropped due to non-availability of stateless TIDs */
4473 __le32 stateless_tid_alloc_failure;
4474
4475 __le32 phy_underrun;
4476
4477 /* MPDU is more than txop limit */
4478 __le32 txop_ovf;
4479
4480 /* Number of Sequences posted */
4481 __le32 seq_posted;
4482
4483 /* Number of Sequences failed queueing */
4484 __le32 seq_failed_queueing;
4485
4486 /* Number of Sequences completed */
4487 __le32 seq_completed;
4488
4489 /* Number of Sequences restarted */
4490 __le32 seq_restarted;
4491
4492 /* Number of MU Sequences posted */
4493 __le32 mu_seq_posted;
4494
4495 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */
4496 __le32 mpdus_sw_flush;
4497
4498 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */
4499 __le32 mpdus_hw_filter;
4500
4501 /* Num MPDUs truncated by PDG
4502 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw)
4503 */
4504 __le32 mpdus_truncated;
4505
4506 /* Num MPDUs that was tried but didn't receive ACK or BA */
4507 __le32 mpdus_ack_failed;
4508
4509 /* Num MPDUs that was dropped due to expiry. */
4510 __le32 mpdus_expired;
4511 } __packed;
4512
4513 struct wmi_pdev_stats_rx {
4514 /* Cnts any change in ring routing mid-ppdu */
4515 __le32 mid_ppdu_route_change;
4516
4517 /* Total number of statuses processed */
4518 __le32 status_rcvd;
4519
4520 /* Extra frags on rings 0-3 */
4521 __le32 r0_frags;
4522 __le32 r1_frags;
4523 __le32 r2_frags;
4524 __le32 r3_frags;
4525
4526 /* MSDUs / MPDUs delivered to HTT */
4527 __le32 htt_msdus;
4528 __le32 htt_mpdus;
4529
4530 /* MSDUs / MPDUs delivered to local stack */
4531 __le32 loc_msdus;
4532 __le32 loc_mpdus;
4533
4534 /* AMSDUs that have more MSDUs than the status ring size */
4535 __le32 oversize_amsdu;
4536
4537 /* Number of PHY errors */
4538 __le32 phy_errs;
4539
4540 /* Number of PHY errors drops */
4541 __le32 phy_err_drop;
4542
4543 /* Number of mpdu errors - FCS, MIC, ENC etc. */
4544 __le32 mpdu_errs;
4545 } __packed;
4546
4547 struct wmi_pdev_stats_peer {
4548 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
4549 __le32 dummy;
4550 } __packed;
4551
4552 enum wmi_stats_id {
4553 WMI_STAT_PEER = BIT(0),
4554 WMI_STAT_AP = BIT(1),
4555 WMI_STAT_PDEV = BIT(2),
4556 WMI_STAT_VDEV = BIT(3),
4557 WMI_STAT_BCNFLT = BIT(4),
4558 WMI_STAT_VDEV_RATE = BIT(5),
4559 };
4560
4561 enum wmi_10_4_stats_id {
4562 WMI_10_4_STAT_PEER = BIT(0),
4563 WMI_10_4_STAT_AP = BIT(1),
4564 WMI_10_4_STAT_INST = BIT(2),
4565 WMI_10_4_STAT_PEER_EXTD = BIT(3),
4566 WMI_10_4_STAT_VDEV_EXTD = BIT(4),
4567 };
4568
4569 enum wmi_tlv_stats_id {
4570 WMI_TLV_STAT_PEER = BIT(0),
4571 WMI_TLV_STAT_AP = BIT(1),
4572 WMI_TLV_STAT_PDEV = BIT(2),
4573 WMI_TLV_STAT_VDEV = BIT(3),
4574 WMI_TLV_STAT_PEER_EXTD = BIT(10),
4575 };
4576
4577 struct wlan_inst_rssi_args {
4578 __le16 cfg_retry_count;
4579 __le16 retry_count;
4580 };
4581
4582 struct wmi_request_stats_cmd {
4583 __le32 stats_id;
4584
4585 __le32 vdev_id;
4586
4587 /* peer MAC address */
4588 struct wmi_mac_addr peer_macaddr;
4589
4590 /* Instantaneous RSSI arguments */
4591 struct wlan_inst_rssi_args inst_rssi_args;
4592 } __packed;
4593
4594 enum wmi_peer_stats_info_request_type {
4595 /* request stats of one specified peer */
4596 WMI_REQUEST_ONE_PEER_STATS_INFO = 0x01,
4597 /* request stats of all peers belong to specified VDEV */
4598 WMI_REQUEST_VDEV_ALL_PEER_STATS_INFO = 0x02,
4599 };
4600
4601 /* Suspend option */
4602 enum {
4603 /* suspend */
4604 WMI_PDEV_SUSPEND,
4605
4606 /* suspend and disable all interrupts */
4607 WMI_PDEV_SUSPEND_AND_DISABLE_INTR,
4608 };
4609
4610 struct wmi_pdev_suspend_cmd {
4611 /* suspend option sent to target */
4612 __le32 suspend_opt;
4613 } __packed;
4614
4615 struct wmi_stats_event {
4616 __le32 stats_id; /* WMI_STAT_ */
4617 /*
4618 * number of pdev stats event structures
4619 * (wmi_pdev_stats) 0 or 1
4620 */
4621 __le32 num_pdev_stats;
4622 /*
4623 * number of vdev stats event structures
4624 * (wmi_vdev_stats) 0 or max vdevs
4625 */
4626 __le32 num_vdev_stats;
4627 /*
4628 * number of peer stats event structures
4629 * (wmi_peer_stats) 0 or max peers
4630 */
4631 __le32 num_peer_stats;
4632 __le32 num_bcnflt_stats;
4633 /*
4634 * followed by
4635 * num_pdev_stats * size of(struct wmi_pdev_stats)
4636 * num_vdev_stats * size of(struct wmi_vdev_stats)
4637 * num_peer_stats * size of(struct wmi_peer_stats)
4638 *
4639 * By having a zero sized array, the pointer to data area
4640 * becomes available without increasing the struct size
4641 */
4642 u8 data[];
4643 } __packed;
4644
4645 struct wmi_10_2_stats_event {
4646 __le32 stats_id; /* %WMI_REQUEST_ */
4647 __le32 num_pdev_stats;
4648 __le32 num_pdev_ext_stats;
4649 __le32 num_vdev_stats;
4650 __le32 num_peer_stats;
4651 __le32 num_bcnflt_stats;
4652 u8 data[];
4653 } __packed;
4654
4655 /*
4656 * PDEV statistics
4657 * TODO: add all PDEV stats here
4658 */
4659 struct wmi_pdev_stats_base {
4660 __le32 chan_nf;
4661 __le32 tx_frame_count; /* Cycles spent transmitting frames */
4662 __le32 rx_frame_count; /* Cycles spent receiving frames */
4663 __le32 rx_clear_count; /* Total channel busy time, evidently */
4664 __le32 cycle_count; /* Total on-channel time */
4665 __le32 phy_err_count;
4666 __le32 chan_tx_pwr;
4667 } __packed;
4668
4669 struct wmi_pdev_stats {
4670 struct wmi_pdev_stats_base base;
4671 struct wmi_pdev_stats_tx tx;
4672 struct wmi_pdev_stats_rx rx;
4673 struct wmi_pdev_stats_peer peer;
4674 } __packed;
4675
4676 struct wmi_pdev_stats_extra {
4677 __le32 ack_rx_bad;
4678 __le32 rts_bad;
4679 __le32 rts_good;
4680 __le32 fcs_bad;
4681 __le32 no_beacons;
4682 __le32 mib_int_count;
4683 } __packed;
4684
4685 struct wmi_10x_pdev_stats {
4686 struct wmi_pdev_stats_base base;
4687 struct wmi_pdev_stats_tx tx;
4688 struct wmi_pdev_stats_rx rx;
4689 struct wmi_pdev_stats_peer peer;
4690 struct wmi_pdev_stats_extra extra;
4691 } __packed;
4692
4693 struct wmi_pdev_stats_mem {
4694 __le32 dram_free;
4695 __le32 iram_free;
4696 } __packed;
4697
4698 struct wmi_10_2_pdev_stats {
4699 struct wmi_pdev_stats_base base;
4700 struct wmi_pdev_stats_tx tx;
4701 __le32 mc_drop;
4702 struct wmi_pdev_stats_rx rx;
4703 __le32 pdev_rx_timeout;
4704 struct wmi_pdev_stats_mem mem;
4705 struct wmi_pdev_stats_peer peer;
4706 struct wmi_pdev_stats_extra extra;
4707 } __packed;
4708
4709 struct wmi_10_4_pdev_stats {
4710 struct wmi_pdev_stats_base base;
4711 struct wmi_10_4_pdev_stats_tx tx;
4712 struct wmi_pdev_stats_rx rx;
4713 __le32 rx_ovfl_errs;
4714 struct wmi_pdev_stats_mem mem;
4715 __le32 sram_free_size;
4716 struct wmi_pdev_stats_extra extra;
4717 } __packed;
4718
4719 /*
4720 * VDEV statistics
4721 */
4722
4723 #define WMI_VDEV_STATS_FTM_COUNT_VALID BIT(31)
4724 #define WMI_VDEV_STATS_FTM_COUNT_LSB 0
4725 #define WMI_VDEV_STATS_FTM_COUNT_MASK 0x7fffffff
4726
4727 struct wmi_vdev_stats {
4728 __le32 vdev_id;
4729 } __packed;
4730
4731 struct wmi_vdev_stats_extd {
4732 __le32 vdev_id;
4733 __le32 ppdu_aggr_cnt;
4734 __le32 ppdu_noack;
4735 __le32 mpdu_queued;
4736 __le32 ppdu_nonaggr_cnt;
4737 __le32 mpdu_sw_requeued;
4738 __le32 mpdu_suc_retry;
4739 __le32 mpdu_suc_multitry;
4740 __le32 mpdu_fail_retry;
4741 __le32 tx_ftm_suc;
4742 __le32 tx_ftm_suc_retry;
4743 __le32 tx_ftm_fail;
4744 __le32 rx_ftmr_cnt;
4745 __le32 rx_ftmr_dup_cnt;
4746 __le32 rx_iftmr_cnt;
4747 __le32 rx_iftmr_dup_cnt;
4748 __le32 reserved[6];
4749 } __packed;
4750
4751 /*
4752 * peer statistics.
4753 * TODO: add more stats
4754 */
4755 struct wmi_peer_stats {
4756 struct wmi_mac_addr peer_macaddr;
4757 __le32 peer_rssi;
4758 __le32 peer_tx_rate;
4759 } __packed;
4760
4761 struct wmi_10x_peer_stats {
4762 struct wmi_peer_stats old;
4763 __le32 peer_rx_rate;
4764 } __packed;
4765
4766 struct wmi_10_2_peer_stats {
4767 struct wmi_peer_stats old;
4768 __le32 peer_rx_rate;
4769 __le32 current_per;
4770 __le32 retries;
4771 __le32 tx_rate_count;
4772 __le32 max_4ms_frame_len;
4773 __le32 total_sub_frames;
4774 __le32 tx_bytes;
4775 __le32 num_pkt_loss_overflow[4];
4776 __le32 num_pkt_loss_excess_retry[4];
4777 } __packed;
4778
4779 struct wmi_10_2_4_peer_stats {
4780 struct wmi_10_2_peer_stats common;
4781 __le32 peer_rssi_changed;
4782 } __packed;
4783
4784 struct wmi_10_2_4_ext_peer_stats {
4785 struct wmi_10_2_peer_stats common;
4786 __le32 peer_rssi_changed;
4787 __le32 rx_duration;
4788 } __packed;
4789
4790 struct wmi_10_4_peer_stats {
4791 struct wmi_mac_addr peer_macaddr;
4792 __le32 peer_rssi;
4793 __le32 peer_rssi_seq_num;
4794 __le32 peer_tx_rate;
4795 __le32 peer_rx_rate;
4796 __le32 current_per;
4797 __le32 retries;
4798 __le32 tx_rate_count;
4799 __le32 max_4ms_frame_len;
4800 __le32 total_sub_frames;
4801 __le32 tx_bytes;
4802 __le32 num_pkt_loss_overflow[4];
4803 __le32 num_pkt_loss_excess_retry[4];
4804 __le32 peer_rssi_changed;
4805 } __packed;
4806
4807 struct wmi_10_4_peer_extd_stats {
4808 struct wmi_mac_addr peer_macaddr;
4809 __le32 inactive_time;
4810 __le32 peer_chain_rssi;
4811 __le32 rx_duration;
4812 __le32 reserved[10];
4813 } __packed;
4814
4815 struct wmi_10_4_bss_bcn_stats {
4816 __le32 vdev_id;
4817 __le32 bss_bcns_dropped;
4818 __le32 bss_bcn_delivered;
4819 } __packed;
4820
4821 struct wmi_10_4_bss_bcn_filter_stats {
4822 __le32 bcns_dropped;
4823 __le32 bcns_delivered;
4824 __le32 active_filters;
4825 struct wmi_10_4_bss_bcn_stats bss_stats;
4826 } __packed;
4827
4828 struct wmi_10_2_pdev_ext_stats {
4829 __le32 rx_rssi_comb;
4830 __le32 rx_rssi[4];
4831 __le32 rx_mcs[10];
4832 __le32 tx_mcs[10];
4833 __le32 ack_rssi;
4834 } __packed;
4835
4836 struct wmi_vdev_create_cmd {
4837 __le32 vdev_id;
4838 __le32 vdev_type;
4839 __le32 vdev_subtype;
4840 struct wmi_mac_addr vdev_macaddr;
4841 } __packed;
4842
4843 enum wmi_vdev_type {
4844 WMI_VDEV_TYPE_AP = 1,
4845 WMI_VDEV_TYPE_STA = 2,
4846 WMI_VDEV_TYPE_IBSS = 3,
4847 WMI_VDEV_TYPE_MONITOR = 4,
4848 };
4849
4850 enum wmi_vdev_subtype {
4851 WMI_VDEV_SUBTYPE_NONE,
4852 WMI_VDEV_SUBTYPE_P2P_DEVICE,
4853 WMI_VDEV_SUBTYPE_P2P_CLIENT,
4854 WMI_VDEV_SUBTYPE_P2P_GO,
4855 WMI_VDEV_SUBTYPE_PROXY_STA,
4856 WMI_VDEV_SUBTYPE_MESH_11S,
4857 WMI_VDEV_SUBTYPE_MESH_NON_11S,
4858 };
4859
4860 enum wmi_vdev_subtype_legacy {
4861 WMI_VDEV_SUBTYPE_LEGACY_NONE = 0,
4862 WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1,
4863 WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2,
4864 WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3,
4865 WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4,
4866 };
4867
4868 enum wmi_vdev_subtype_10_2_4 {
4869 WMI_VDEV_SUBTYPE_10_2_4_NONE = 0,
4870 WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1,
4871 WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2,
4872 WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3,
4873 WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4,
4874 WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5,
4875 };
4876
4877 enum wmi_vdev_subtype_10_4 {
4878 WMI_VDEV_SUBTYPE_10_4_NONE = 0,
4879 WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1,
4880 WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2,
4881 WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3,
4882 WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4,
4883 WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5,
4884 WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6,
4885 };
4886
4887 /* values for vdev_subtype */
4888
4889 /* values for vdev_start_request flags */
4890 /*
4891 * Indicates that AP VDEV uses hidden ssid. only valid for
4892 * AP/GO
4893 */
4894 #define WMI_VDEV_START_HIDDEN_SSID (1 << 0)
4895 /*
4896 * Indicates if robust management frame/management frame
4897 * protection is enabled. For GO/AP vdevs, it indicates that
4898 * it may support station/client associations with RMF enabled.
4899 * For STA/client vdevs, it indicates that sta will
4900 * associate with AP with RMF enabled.
4901 */
4902 #define WMI_VDEV_START_PMF_ENABLED (1 << 1)
4903
4904 struct wmi_p2p_noa_descriptor {
4905 __le32 type_count; /* 255: continuous schedule, 0: reserved */
4906 __le32 duration; /* Absent period duration in micro seconds */
4907 __le32 interval; /* Absent period interval in micro seconds */
4908 __le32 start_time; /* 32 bit tsf time when in starts */
4909 } __packed;
4910
4911 struct wmi_vdev_start_request_cmd {
4912 /* WMI channel */
4913 struct wmi_channel chan;
4914 /* unique id identifying the VDEV, generated by the caller */
4915 __le32 vdev_id;
4916 /* requestor id identifying the caller module */
4917 __le32 requestor_id;
4918 /* beacon interval from received beacon */
4919 __le32 beacon_interval;
4920 /* DTIM Period from the received beacon */
4921 __le32 dtim_period;
4922 /* Flags */
4923 __le32 flags;
4924 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */
4925 struct wmi_ssid ssid;
4926 /* beacon/probe response xmit rate. Applicable for SoftAP. */
4927 __le32 bcn_tx_rate;
4928 /* beacon/probe response xmit power. Applicable for SoftAP. */
4929 __le32 bcn_tx_power;
4930 /* number of p2p NOA descriptor(s) from scan entry */
4931 __le32 num_noa_descriptors;
4932 /*
4933 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID.
4934 * During CAC, Our HW shouldn't ack ditected frames
4935 */
4936 __le32 disable_hw_ack;
4937 /* actual p2p NOA descriptor from scan entry */
4938 struct wmi_p2p_noa_descriptor noa_descriptors[2];
4939 } __packed;
4940
4941 struct wmi_vdev_restart_request_cmd {
4942 struct wmi_vdev_start_request_cmd vdev_start_request_cmd;
4943 } __packed;
4944
4945 struct wmi_vdev_start_request_arg {
4946 u32 vdev_id;
4947 struct wmi_channel_arg channel;
4948 u32 bcn_intval;
4949 u32 dtim_period;
4950 u8 *ssid;
4951 u32 ssid_len;
4952 u32 bcn_tx_rate;
4953 u32 bcn_tx_power;
4954 bool disable_hw_ack;
4955 bool hidden_ssid;
4956 bool pmf_enabled;
4957 };
4958
4959 struct wmi_vdev_delete_cmd {
4960 /* unique id identifying the VDEV, generated by the caller */
4961 __le32 vdev_id;
4962 } __packed;
4963
4964 struct wmi_vdev_up_cmd {
4965 __le32 vdev_id;
4966 __le32 vdev_assoc_id;
4967 struct wmi_mac_addr vdev_bssid;
4968 } __packed;
4969
4970 struct wmi_vdev_stop_cmd {
4971 __le32 vdev_id;
4972 } __packed;
4973
4974 struct wmi_vdev_down_cmd {
4975 __le32 vdev_id;
4976 } __packed;
4977
4978 struct wmi_vdev_standby_response_cmd {
4979 /* unique id identifying the VDEV, generated by the caller */
4980 __le32 vdev_id;
4981 } __packed;
4982
4983 struct wmi_vdev_resume_response_cmd {
4984 /* unique id identifying the VDEV, generated by the caller */
4985 __le32 vdev_id;
4986 } __packed;
4987
4988 struct wmi_vdev_set_param_cmd {
4989 __le32 vdev_id;
4990 __le32 param_id;
4991 __le32 param_value;
4992 } __packed;
4993
4994 #define WMI_MAX_KEY_INDEX 3
4995 #define WMI_MAX_KEY_LEN 32
4996
4997 #define WMI_KEY_PAIRWISE 0x00
4998 #define WMI_KEY_GROUP 0x01
4999 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */
5000
5001 struct wmi_key_seq_counter {
5002 __le32 key_seq_counter_l;
5003 __le32 key_seq_counter_h;
5004 } __packed;
5005
5006 enum wmi_cipher_suites {
5007 WMI_CIPHER_NONE,
5008 WMI_CIPHER_WEP,
5009 WMI_CIPHER_TKIP,
5010 WMI_CIPHER_AES_OCB,
5011 WMI_CIPHER_AES_CCM,
5012 WMI_CIPHER_WAPI,
5013 WMI_CIPHER_CKIP,
5014 WMI_CIPHER_AES_CMAC,
5015 WMI_CIPHER_AES_GCM,
5016 };
5017
5018 enum wmi_tlv_cipher_suites {
5019 WMI_TLV_CIPHER_NONE,
5020 WMI_TLV_CIPHER_WEP,
5021 WMI_TLV_CIPHER_TKIP,
5022 WMI_TLV_CIPHER_AES_OCB,
5023 WMI_TLV_CIPHER_AES_CCM,
5024 WMI_TLV_CIPHER_WAPI,
5025 WMI_TLV_CIPHER_CKIP,
5026 WMI_TLV_CIPHER_AES_CMAC,
5027 WMI_TLV_CIPHER_ANY,
5028 WMI_TLV_CIPHER_AES_GCM,
5029 };
5030
5031 struct wmi_vdev_install_key_cmd {
5032 __le32 vdev_id;
5033 struct wmi_mac_addr peer_macaddr;
5034 __le32 key_idx;
5035 __le32 key_flags;
5036 __le32 key_cipher; /* %WMI_CIPHER_ */
5037 struct wmi_key_seq_counter key_rsc_counter;
5038 struct wmi_key_seq_counter key_global_rsc_counter;
5039 struct wmi_key_seq_counter key_tsc_counter;
5040 u8 wpi_key_rsc_counter[16];
5041 u8 wpi_key_tsc_counter[16];
5042 __le32 key_len;
5043 __le32 key_txmic_len;
5044 __le32 key_rxmic_len;
5045
5046 /* contains key followed by tx mic followed by rx mic */
5047 u8 key_data[];
5048 } __packed;
5049
5050 struct wmi_vdev_install_key_arg {
5051 u32 vdev_id;
5052 const u8 *macaddr;
5053 u32 key_idx;
5054 u32 key_flags;
5055 u32 key_cipher;
5056 u32 key_len;
5057 u32 key_txmic_len;
5058 u32 key_rxmic_len;
5059 const void *key_data;
5060 };
5061
5062 /*
5063 * vdev fixed rate format:
5064 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_
5065 * - nss - b5:b4 - ss number (0 mean 1ss)
5066 * - rate_mcs - b3:b0 - as below
5067 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
5068 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
5069 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
5070 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
5071 * HT/VHT: MCS index
5072 */
5073
5074 /* Preamble types to be used with VDEV fixed rate configuration */
5075 enum wmi_rate_preamble {
5076 WMI_RATE_PREAMBLE_OFDM,
5077 WMI_RATE_PREAMBLE_CCK,
5078 WMI_RATE_PREAMBLE_HT,
5079 WMI_RATE_PREAMBLE_VHT,
5080 };
5081
5082 #define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3))
5083 #define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3)
5084 #define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf)
5085 #define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f)
5086 #define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3)
5087 #define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1)
5088 #define ATH10K_HW_RATECODE(rate, nss, preamble) \
5089 (((preamble) << 6) | ((nss) << 4) | (rate))
5090 #define ATH10K_HW_AMPDU(flags) ((flags) & 0x1)
5091 #define ATH10K_HW_BA_FAIL(flags) (((flags) >> 1) & 0x3)
5092 #define ATH10K_FW_SKIPPED_RATE_CTRL(flags) (((flags) >> 6) & 0x1)
5093
5094 #define ATH10K_VHT_MCS_NUM 10
5095 #define ATH10K_BW_NUM 6
5096 #define ATH10K_NSS_NUM 4
5097 #define ATH10K_LEGACY_NUM 12
5098 #define ATH10K_GI_NUM 2
5099 #define ATH10K_HT_MCS_NUM 32
5100 #define ATH10K_RATE_TABLE_NUM 320
5101 #define ATH10K_RATE_INFO_FLAGS_SGI_BIT 2
5102
5103 /* Value to disable fixed rate setting */
5104 #define WMI_FIXED_RATE_NONE (0xff)
5105
5106 struct wmi_peer_param_map {
5107 u32 smps_state;
5108 u32 ampdu;
5109 u32 authorize;
5110 u32 chan_width;
5111 u32 nss;
5112 u32 use_4addr;
5113 u32 membership;
5114 u32 use_fixed_power;
5115 u32 user_pos;
5116 u32 crit_proto_hint_enabled;
5117 u32 tx_fail_cnt_thr;
5118 u32 set_hw_retry_cts2s;
5119 u32 ibss_atim_win_len;
5120 u32 debug;
5121 u32 phymode;
5122 u32 dummy_var;
5123 };
5124
5125 struct wmi_vdev_param_map {
5126 u32 rts_threshold;
5127 u32 fragmentation_threshold;
5128 u32 beacon_interval;
5129 u32 listen_interval;
5130 u32 multicast_rate;
5131 u32 mgmt_tx_rate;
5132 u32 slot_time;
5133 u32 preamble;
5134 u32 swba_time;
5135 u32 wmi_vdev_stats_update_period;
5136 u32 wmi_vdev_pwrsave_ageout_time;
5137 u32 wmi_vdev_host_swba_interval;
5138 u32 dtim_period;
5139 u32 wmi_vdev_oc_scheduler_air_time_limit;
5140 u32 wds;
5141 u32 atim_window;
5142 u32 bmiss_count_max;
5143 u32 bmiss_first_bcnt;
5144 u32 bmiss_final_bcnt;
5145 u32 feature_wmm;
5146 u32 chwidth;
5147 u32 chextoffset;
5148 u32 disable_htprotection;
5149 u32 sta_quickkickout;
5150 u32 mgmt_rate;
5151 u32 protection_mode;
5152 u32 fixed_rate;
5153 u32 sgi;
5154 u32 ldpc;
5155 u32 tx_stbc;
5156 u32 rx_stbc;
5157 u32 intra_bss_fwd;
5158 u32 def_keyid;
5159 u32 nss;
5160 u32 bcast_data_rate;
5161 u32 mcast_data_rate;
5162 u32 mcast_indicate;
5163 u32 dhcp_indicate;
5164 u32 unknown_dest_indicate;
5165 u32 ap_keepalive_min_idle_inactive_time_secs;
5166 u32 ap_keepalive_max_idle_inactive_time_secs;
5167 u32 ap_keepalive_max_unresponsive_time_secs;
5168 u32 ap_enable_nawds;
5169 u32 mcast2ucast_set;
5170 u32 enable_rtscts;
5171 u32 txbf;
5172 u32 packet_powersave;
5173 u32 drop_unencry;
5174 u32 tx_encap_type;
5175 u32 ap_detect_out_of_sync_sleeping_sta_time_secs;
5176 u32 rc_num_retries;
5177 u32 cabq_maxdur;
5178 u32 mfptest_set;
5179 u32 rts_fixed_rate;
5180 u32 vht_sgimask;
5181 u32 vht80_ratemask;
5182 u32 early_rx_adjust_enable;
5183 u32 early_rx_tgt_bmiss_num;
5184 u32 early_rx_bmiss_sample_cycle;
5185 u32 early_rx_slop_step;
5186 u32 early_rx_init_slop;
5187 u32 early_rx_adjust_pause;
5188 u32 proxy_sta;
5189 u32 meru_vc;
5190 u32 rx_decap_type;
5191 u32 bw_nss_ratemask;
5192 u32 inc_tsf;
5193 u32 dec_tsf;
5194 u32 disable_4addr_src_lrn;
5195 u32 rtt_responder_role;
5196 };
5197
5198 #define WMI_VDEV_PARAM_UNSUPPORTED 0
5199
5200 /* the definition of different VDEV parameters */
5201 enum wmi_vdev_param {
5202 /* RTS Threshold */
5203 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5204 /* Fragmentation threshold */
5205 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5206 /* beacon interval in TUs */
5207 WMI_VDEV_PARAM_BEACON_INTERVAL,
5208 /* Listen interval in TUs */
5209 WMI_VDEV_PARAM_LISTEN_INTERVAL,
5210 /* multicast rate in Mbps */
5211 WMI_VDEV_PARAM_MULTICAST_RATE,
5212 /* management frame rate in Mbps */
5213 WMI_VDEV_PARAM_MGMT_TX_RATE,
5214 /* slot time (long vs short) */
5215 WMI_VDEV_PARAM_SLOT_TIME,
5216 /* preamble (long vs short) */
5217 WMI_VDEV_PARAM_PREAMBLE,
5218 /* SWBA time (time before tbtt in msec) */
5219 WMI_VDEV_PARAM_SWBA_TIME,
5220 /* time period for updating VDEV stats */
5221 WMI_VDEV_STATS_UPDATE_PERIOD,
5222 /* age out time in msec for frames queued for station in power save */
5223 WMI_VDEV_PWRSAVE_AGEOUT_TIME,
5224 /*
5225 * Host SWBA interval (time in msec before tbtt for SWBA event
5226 * generation).
5227 */
5228 WMI_VDEV_HOST_SWBA_INTERVAL,
5229 /* DTIM period (specified in units of num beacon intervals) */
5230 WMI_VDEV_PARAM_DTIM_PERIOD,
5231 /*
5232 * scheduler air time limit for this VDEV. used by off chan
5233 * scheduler.
5234 */
5235 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5236 /* enable/dsiable WDS for this VDEV */
5237 WMI_VDEV_PARAM_WDS,
5238 /* ATIM Window */
5239 WMI_VDEV_PARAM_ATIM_WINDOW,
5240 /* BMISS max */
5241 WMI_VDEV_PARAM_BMISS_COUNT_MAX,
5242 /* BMISS first time */
5243 WMI_VDEV_PARAM_BMISS_FIRST_BCNT,
5244 /* BMISS final time */
5245 WMI_VDEV_PARAM_BMISS_FINAL_BCNT,
5246 /* WMM enables/disabled */
5247 WMI_VDEV_PARAM_FEATURE_WMM,
5248 /* Channel width */
5249 WMI_VDEV_PARAM_CHWIDTH,
5250 /* Channel Offset */
5251 WMI_VDEV_PARAM_CHEXTOFFSET,
5252 /* Disable HT Protection */
5253 WMI_VDEV_PARAM_DISABLE_HTPROTECTION,
5254 /* Quick STA Kickout */
5255 WMI_VDEV_PARAM_STA_QUICKKICKOUT,
5256 /* Rate to be used with Management frames */
5257 WMI_VDEV_PARAM_MGMT_RATE,
5258 /* Protection Mode */
5259 WMI_VDEV_PARAM_PROTECTION_MODE,
5260 /* Fixed rate setting */
5261 WMI_VDEV_PARAM_FIXED_RATE,
5262 /* Short GI Enable/Disable */
5263 WMI_VDEV_PARAM_SGI,
5264 /* Enable LDPC */
5265 WMI_VDEV_PARAM_LDPC,
5266 /* Enable Tx STBC */
5267 WMI_VDEV_PARAM_TX_STBC,
5268 /* Enable Rx STBC */
5269 WMI_VDEV_PARAM_RX_STBC,
5270 /* Intra BSS forwarding */
5271 WMI_VDEV_PARAM_INTRA_BSS_FWD,
5272 /* Setting Default xmit key for Vdev */
5273 WMI_VDEV_PARAM_DEF_KEYID,
5274 /* NSS width */
5275 WMI_VDEV_PARAM_NSS,
5276 /* Set the custom rate for the broadcast data frames */
5277 WMI_VDEV_PARAM_BCAST_DATA_RATE,
5278 /* Set the custom rate (rate-code) for multicast data frames */
5279 WMI_VDEV_PARAM_MCAST_DATA_RATE,
5280 /* Tx multicast packet indicate Enable/Disable */
5281 WMI_VDEV_PARAM_MCAST_INDICATE,
5282 /* Tx DHCP packet indicate Enable/Disable */
5283 WMI_VDEV_PARAM_DHCP_INDICATE,
5284 /* Enable host inspection of Tx unicast packet to unknown destination */
5285 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5286
5287 /* The minimum amount of time AP begins to consider STA inactive */
5288 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5289
5290 /*
5291 * An associated STA is considered inactive when there is no recent
5292 * TX/RX activity and no downlink frames are buffered for it. Once a
5293 * STA exceeds the maximum idle inactive time, the AP will send an
5294 * 802.11 data-null as a keep alive to verify the STA is still
5295 * associated. If the STA does ACK the data-null, or if the data-null
5296 * is buffered and the STA does not retrieve it, the STA will be
5297 * considered unresponsive
5298 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
5299 */
5300 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5301
5302 /*
5303 * An associated STA is considered unresponsive if there is no recent
5304 * TX/RX activity and downlink frames are buffered for it. Once a STA
5305 * exceeds the maximum unresponsive time, the AP will send a
5306 * WMI_STA_KICKOUT event to the host so the STA can be deleted.
5307 */
5308 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5309
5310 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
5311 WMI_VDEV_PARAM_AP_ENABLE_NAWDS,
5312 /* Enable/Disable RTS-CTS */
5313 WMI_VDEV_PARAM_ENABLE_RTSCTS,
5314 /* Enable TXBFee/er */
5315 WMI_VDEV_PARAM_TXBF,
5316
5317 /* Set packet power save */
5318 WMI_VDEV_PARAM_PACKET_POWERSAVE,
5319
5320 /*
5321 * Drops un-encrypted packets if eceived in an encrypted connection
5322 * otherwise forwards to host.
5323 */
5324 WMI_VDEV_PARAM_DROP_UNENCRY,
5325
5326 /*
5327 * Set the encapsulation type for frames.
5328 */
5329 WMI_VDEV_PARAM_TX_ENCAP_TYPE,
5330 };
5331
5332 /* the definition of different VDEV parameters */
5333 enum wmi_10x_vdev_param {
5334 /* RTS Threshold */
5335 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5336 /* Fragmentation threshold */
5337 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5338 /* beacon interval in TUs */
5339 WMI_10X_VDEV_PARAM_BEACON_INTERVAL,
5340 /* Listen interval in TUs */
5341 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,
5342 /* multicast rate in Mbps */
5343 WMI_10X_VDEV_PARAM_MULTICAST_RATE,
5344 /* management frame rate in Mbps */
5345 WMI_10X_VDEV_PARAM_MGMT_TX_RATE,
5346 /* slot time (long vs short) */
5347 WMI_10X_VDEV_PARAM_SLOT_TIME,
5348 /* preamble (long vs short) */
5349 WMI_10X_VDEV_PARAM_PREAMBLE,
5350 /* SWBA time (time before tbtt in msec) */
5351 WMI_10X_VDEV_PARAM_SWBA_TIME,
5352 /* time period for updating VDEV stats */
5353 WMI_10X_VDEV_STATS_UPDATE_PERIOD,
5354 /* age out time in msec for frames queued for station in power save */
5355 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,
5356 /*
5357 * Host SWBA interval (time in msec before tbtt for SWBA event
5358 * generation).
5359 */
5360 WMI_10X_VDEV_HOST_SWBA_INTERVAL,
5361 /* DTIM period (specified in units of num beacon intervals) */
5362 WMI_10X_VDEV_PARAM_DTIM_PERIOD,
5363 /*
5364 * scheduler air time limit for this VDEV. used by off chan
5365 * scheduler.
5366 */
5367 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5368 /* enable/dsiable WDS for this VDEV */
5369 WMI_10X_VDEV_PARAM_WDS,
5370 /* ATIM Window */
5371 WMI_10X_VDEV_PARAM_ATIM_WINDOW,
5372 /* BMISS max */
5373 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,
5374 /* WMM enables/disabled */
5375 WMI_10X_VDEV_PARAM_FEATURE_WMM,
5376 /* Channel width */
5377 WMI_10X_VDEV_PARAM_CHWIDTH,
5378 /* Channel Offset */
5379 WMI_10X_VDEV_PARAM_CHEXTOFFSET,
5380 /* Disable HT Protection */
5381 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,
5382 /* Quick STA Kickout */
5383 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,
5384 /* Rate to be used with Management frames */
5385 WMI_10X_VDEV_PARAM_MGMT_RATE,
5386 /* Protection Mode */
5387 WMI_10X_VDEV_PARAM_PROTECTION_MODE,
5388 /* Fixed rate setting */
5389 WMI_10X_VDEV_PARAM_FIXED_RATE,
5390 /* Short GI Enable/Disable */
5391 WMI_10X_VDEV_PARAM_SGI,
5392 /* Enable LDPC */
5393 WMI_10X_VDEV_PARAM_LDPC,
5394 /* Enable Tx STBC */
5395 WMI_10X_VDEV_PARAM_TX_STBC,
5396 /* Enable Rx STBC */
5397 WMI_10X_VDEV_PARAM_RX_STBC,
5398 /* Intra BSS forwarding */
5399 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,
5400 /* Setting Default xmit key for Vdev */
5401 WMI_10X_VDEV_PARAM_DEF_KEYID,
5402 /* NSS width */
5403 WMI_10X_VDEV_PARAM_NSS,
5404 /* Set the custom rate for the broadcast data frames */
5405 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,
5406 /* Set the custom rate (rate-code) for multicast data frames */
5407 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,
5408 /* Tx multicast packet indicate Enable/Disable */
5409 WMI_10X_VDEV_PARAM_MCAST_INDICATE,
5410 /* Tx DHCP packet indicate Enable/Disable */
5411 WMI_10X_VDEV_PARAM_DHCP_INDICATE,
5412 /* Enable host inspection of Tx unicast packet to unknown destination */
5413 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5414
5415 /* The minimum amount of time AP begins to consider STA inactive */
5416 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5417
5418 /*
5419 * An associated STA is considered inactive when there is no recent
5420 * TX/RX activity and no downlink frames are buffered for it. Once a
5421 * STA exceeds the maximum idle inactive time, the AP will send an
5422 * 802.11 data-null as a keep alive to verify the STA is still
5423 * associated. If the STA does ACK the data-null, or if the data-null
5424 * is buffered and the STA does not retrieve it, the STA will be
5425 * considered unresponsive
5426 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
5427 */
5428 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5429
5430 /*
5431 * An associated STA is considered unresponsive if there is no recent
5432 * TX/RX activity and downlink frames are buffered for it. Once a STA
5433 * exceeds the maximum unresponsive time, the AP will send a
5434 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted.
5435 */
5436 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5437
5438 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
5439 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,
5440
5441 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,
5442 /* Enable/Disable RTS-CTS */
5443 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,
5444
5445 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
5446
5447 /* following are available as of firmware 10.2 */
5448 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE,
5449 WMI_10X_VDEV_PARAM_CABQ_MAXDUR,
5450 WMI_10X_VDEV_PARAM_MFPTEST_SET,
5451 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE,
5452 WMI_10X_VDEV_PARAM_VHT_SGIMASK,
5453 WMI_10X_VDEV_PARAM_VHT80_RATEMASK,
5454 WMI_10X_VDEV_PARAM_TSF_INCREMENT,
5455 };
5456
5457 enum wmi_10_4_vdev_param {
5458 WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5459 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5460 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL,
5461 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL,
5462 WMI_10_4_VDEV_PARAM_MULTICAST_RATE,
5463 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE,
5464 WMI_10_4_VDEV_PARAM_SLOT_TIME,
5465 WMI_10_4_VDEV_PARAM_PREAMBLE,
5466 WMI_10_4_VDEV_PARAM_SWBA_TIME,
5467 WMI_10_4_VDEV_STATS_UPDATE_PERIOD,
5468 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME,
5469 WMI_10_4_VDEV_HOST_SWBA_INTERVAL,
5470 WMI_10_4_VDEV_PARAM_DTIM_PERIOD,
5471 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5472 WMI_10_4_VDEV_PARAM_WDS,
5473 WMI_10_4_VDEV_PARAM_ATIM_WINDOW,
5474 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX,
5475 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT,
5476 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT,
5477 WMI_10_4_VDEV_PARAM_FEATURE_WMM,
5478 WMI_10_4_VDEV_PARAM_CHWIDTH,
5479 WMI_10_4_VDEV_PARAM_CHEXTOFFSET,
5480 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION,
5481 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT,
5482 WMI_10_4_VDEV_PARAM_MGMT_RATE,
5483 WMI_10_4_VDEV_PARAM_PROTECTION_MODE,
5484 WMI_10_4_VDEV_PARAM_FIXED_RATE,
5485 WMI_10_4_VDEV_PARAM_SGI,
5486 WMI_10_4_VDEV_PARAM_LDPC,
5487 WMI_10_4_VDEV_PARAM_TX_STBC,
5488 WMI_10_4_VDEV_PARAM_RX_STBC,
5489 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD,
5490 WMI_10_4_VDEV_PARAM_DEF_KEYID,
5491 WMI_10_4_VDEV_PARAM_NSS,
5492 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE,
5493 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE,
5494 WMI_10_4_VDEV_PARAM_MCAST_INDICATE,
5495 WMI_10_4_VDEV_PARAM_DHCP_INDICATE,
5496 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5497 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5498 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5499 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5500 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS,
5501 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET,
5502 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS,
5503 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES,
5504 WMI_10_4_VDEV_PARAM_TXBF,
5505 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE,
5506 WMI_10_4_VDEV_PARAM_DROP_UNENCRY,
5507 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE,
5508 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
5509 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR,
5510 WMI_10_4_VDEV_PARAM_MFPTEST_SET,
5511 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE,
5512 WMI_10_4_VDEV_PARAM_VHT_SGIMASK,
5513 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK,
5514 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,
5515 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,
5516 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,
5517 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP,
5518 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP,
5519 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,
5520 WMI_10_4_VDEV_PARAM_PROXY_STA,
5521 WMI_10_4_VDEV_PARAM_MERU_VC,
5522 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
5523 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
5524 WMI_10_4_VDEV_PARAM_SENSOR_AP,
5525 WMI_10_4_VDEV_PARAM_BEACON_RATE,
5526 WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS,
5527 WMI_10_4_VDEV_PARAM_STA_KICKOUT,
5528 WMI_10_4_VDEV_PARAM_CAPABILITIES,
5529 WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
5530 WMI_10_4_VDEV_PARAM_RX_FILTER,
5531 WMI_10_4_VDEV_PARAM_MGMT_TX_POWER,
5532 WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY,
5533 WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS,
5534 WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
5535 WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE,
5536 WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC,
5537 WMI_10_4_VDEV_PARAM_NSS_VHT160,
5538 WMI_10_4_VDEV_PARAM_NSS_VHT80_80,
5539 WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC,
5540 WMI_10_4_VDEV_PARAM_DISABLE_CABQ,
5541 WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE,
5542 WMI_10_4_VDEV_PARAM_TX_POWER,
5543 WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE,
5544 WMI_10_4_VDEV_PARAM_DISABLE_4_ADDR_SRC_LRN,
5545 };
5546
5547 #define WMI_VDEV_DISABLE_4_ADDR_SRC_LRN 1
5548
5549 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)
5550 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1)
5551 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2)
5552 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)
5553
5554 #define WMI_TXBF_STS_CAP_OFFSET_LSB 4
5555 #define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70
5556 #define WMI_TXBF_CONF_IMPLICIT_BF BIT(7)
5557 #define WMI_BF_SOUND_DIM_OFFSET_LSB 8
5558 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00
5559
5560 /* slot time long */
5561 #define WMI_VDEV_SLOT_TIME_LONG 0x1
5562 /* slot time short */
5563 #define WMI_VDEV_SLOT_TIME_SHORT 0x2
5564 /* preablbe long */
5565 #define WMI_VDEV_PREAMBLE_LONG 0x1
5566 /* preablbe short */
5567 #define WMI_VDEV_PREAMBLE_SHORT 0x2
5568
5569 enum wmi_start_event_param {
5570 WMI_VDEV_RESP_START_EVENT = 0,
5571 WMI_VDEV_RESP_RESTART_EVENT,
5572 };
5573
5574 struct wmi_vdev_start_response_event {
5575 __le32 vdev_id;
5576 __le32 req_id;
5577 __le32 resp_type; /* %WMI_VDEV_RESP_ */
5578 __le32 status;
5579 } __packed;
5580
5581 struct wmi_vdev_standby_req_event {
5582 /* unique id identifying the VDEV, generated by the caller */
5583 __le32 vdev_id;
5584 } __packed;
5585
5586 struct wmi_vdev_resume_req_event {
5587 /* unique id identifying the VDEV, generated by the caller */
5588 __le32 vdev_id;
5589 } __packed;
5590
5591 struct wmi_vdev_stopped_event {
5592 /* unique id identifying the VDEV, generated by the caller */
5593 __le32 vdev_id;
5594 } __packed;
5595
5596 /*
5597 * common structure used for simple events
5598 * (stopped, resume_req, standby response)
5599 */
5600 struct wmi_vdev_simple_event {
5601 /* unique id identifying the VDEV, generated by the caller */
5602 __le32 vdev_id;
5603 } __packed;
5604
5605 /* VDEV start response status codes */
5606 /* VDEV successfully started */
5607 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0
5608
5609 /* requested VDEV not found */
5610 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1
5611
5612 /* unsupported VDEV combination */
5613 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2
5614
5615 /* TODO: please add more comments if you have in-depth information */
5616 struct wmi_vdev_spectral_conf_cmd {
5617 __le32 vdev_id;
5618
5619 /* number of fft samples to send (0 for infinite) */
5620 __le32 scan_count;
5621 __le32 scan_period;
5622 __le32 scan_priority;
5623
5624 /* number of bins in the FFT: 2^(fft_size - bin_scale) */
5625 __le32 scan_fft_size;
5626 __le32 scan_gc_ena;
5627 __le32 scan_restart_ena;
5628 __le32 scan_noise_floor_ref;
5629 __le32 scan_init_delay;
5630 __le32 scan_nb_tone_thr;
5631 __le32 scan_str_bin_thr;
5632 __le32 scan_wb_rpt_mode;
5633 __le32 scan_rssi_rpt_mode;
5634 __le32 scan_rssi_thr;
5635 __le32 scan_pwr_format;
5636
5637 /* rpt_mode: Format of FFT report to software for spectral scan
5638 * triggered FFTs:
5639 * 0: No FFT report (only spectral scan summary report)
5640 * 1: 2-dword summary of metrics for each completed FFT + spectral
5641 * scan summary report
5642 * 2: 2-dword summary of metrics for each completed FFT +
5643 * 1x- oversampled bins(in-band) per FFT + spectral scan summary
5644 * report
5645 * 3: 2-dword summary of metrics for each completed FFT +
5646 * 2x- oversampled bins (all) per FFT + spectral scan summary
5647 */
5648 __le32 scan_rpt_mode;
5649 __le32 scan_bin_scale;
5650 __le32 scan_dbm_adj;
5651 __le32 scan_chn_mask;
5652 } __packed;
5653
5654 struct wmi_vdev_spectral_conf_arg {
5655 u32 vdev_id;
5656 u32 scan_count;
5657 u32 scan_period;
5658 u32 scan_priority;
5659 u32 scan_fft_size;
5660 u32 scan_gc_ena;
5661 u32 scan_restart_ena;
5662 u32 scan_noise_floor_ref;
5663 u32 scan_init_delay;
5664 u32 scan_nb_tone_thr;
5665 u32 scan_str_bin_thr;
5666 u32 scan_wb_rpt_mode;
5667 u32 scan_rssi_rpt_mode;
5668 u32 scan_rssi_thr;
5669 u32 scan_pwr_format;
5670 u32 scan_rpt_mode;
5671 u32 scan_bin_scale;
5672 u32 scan_dbm_adj;
5673 u32 scan_chn_mask;
5674 };
5675
5676 #define WMI_SPECTRAL_ENABLE_DEFAULT 0
5677 #define WMI_SPECTRAL_COUNT_DEFAULT 0
5678 #define WMI_SPECTRAL_PERIOD_DEFAULT 35
5679 #define WMI_SPECTRAL_PRIORITY_DEFAULT 1
5680 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7
5681 #define WMI_SPECTRAL_GC_ENA_DEFAULT 1
5682 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0
5683 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96
5684 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80
5685 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12
5686 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8
5687 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0
5688 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0
5689 #define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0
5690 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0
5691 #define WMI_SPECTRAL_RPT_MODE_DEFAULT 2
5692 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1
5693 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1
5694 #define WMI_SPECTRAL_CHN_MASK_DEFAULT 1
5695
5696 struct wmi_vdev_spectral_enable_cmd {
5697 __le32 vdev_id;
5698 __le32 trigger_cmd;
5699 __le32 enable_cmd;
5700 } __packed;
5701
5702 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1
5703 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2
5704 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1
5705 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2
5706
5707 /* Beacon processing related command and event structures */
5708 struct wmi_bcn_tx_hdr {
5709 __le32 vdev_id;
5710 __le32 tx_rate;
5711 __le32 tx_power;
5712 __le32 bcn_len;
5713 } __packed;
5714
5715 struct wmi_bcn_tx_cmd {
5716 struct wmi_bcn_tx_hdr hdr;
5717 u8 *bcn[];
5718 } __packed;
5719
5720 struct wmi_bcn_tx_arg {
5721 u32 vdev_id;
5722 u32 tx_rate;
5723 u32 tx_power;
5724 u32 bcn_len;
5725 const void *bcn;
5726 };
5727
5728 enum wmi_bcn_tx_ref_flags {
5729 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1,
5730 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2,
5731 };
5732
5733 /* TODO: It is unclear why "no antenna" works while any other seemingly valid
5734 * chainmask yields no beacons on the air at all.
5735 */
5736 #define WMI_BCN_TX_REF_DEF_ANTENNA 0
5737
5738 struct wmi_bcn_tx_ref_cmd {
5739 __le32 vdev_id;
5740 __le32 data_len;
5741 /* physical address of the frame - dma pointer */
5742 __le32 data_ptr;
5743 /* id for host to track */
5744 __le32 msdu_id;
5745 /* frame ctrl to setup PPDU desc */
5746 __le32 frame_control;
5747 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */
5748 __le32 flags;
5749 /* introduced in 10.2 */
5750 __le32 antenna_mask;
5751 } __packed;
5752
5753 /* Beacon filter */
5754 #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */
5755 #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */
5756 #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */
5757 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */
5758 #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */
5759
5760 struct wmi_bcn_filter_rx_cmd {
5761 /* Filter ID */
5762 __le32 bcn_filter_id;
5763 /* Filter type - wmi_bcn_filter */
5764 __le32 bcn_filter;
5765 /* Buffer len */
5766 __le32 bcn_filter_len;
5767 /* Filter info (threshold, BSSID, RSSI) */
5768 u8 *bcn_filter_buf;
5769 } __packed;
5770
5771 /* Capabilities and IEs to be passed to firmware */
5772 struct wmi_bcn_prb_info {
5773 /* Capabilities */
5774 __le32 caps;
5775 /* ERP info */
5776 __le32 erp;
5777 /* Advanced capabilities */
5778 /* HT capabilities */
5779 /* HT Info */
5780 /* ibss_dfs */
5781 /* wpa Info */
5782 /* rsn Info */
5783 /* rrm info */
5784 /* ath_ext */
5785 /* app IE */
5786 } __packed;
5787
5788 struct wmi_bcn_tmpl_cmd {
5789 /* unique id identifying the VDEV, generated by the caller */
5790 __le32 vdev_id;
5791 /* TIM IE offset from the beginning of the template. */
5792 __le32 tim_ie_offset;
5793 /* beacon probe capabilities and IEs */
5794 struct wmi_bcn_prb_info bcn_prb_info;
5795 /* beacon buffer length */
5796 __le32 buf_len;
5797 /* variable length data */
5798 u8 data[1];
5799 } __packed;
5800
5801 struct wmi_prb_tmpl_cmd {
5802 /* unique id identifying the VDEV, generated by the caller */
5803 __le32 vdev_id;
5804 /* beacon probe capabilities and IEs */
5805 struct wmi_bcn_prb_info bcn_prb_info;
5806 /* beacon buffer length */
5807 __le32 buf_len;
5808 /* Variable length data */
5809 u8 data[1];
5810 } __packed;
5811
5812 enum wmi_sta_ps_mode {
5813 /* enable power save for the given STA VDEV */
5814 WMI_STA_PS_MODE_DISABLED = 0,
5815 /* disable power save for a given STA VDEV */
5816 WMI_STA_PS_MODE_ENABLED = 1,
5817 };
5818
5819 struct wmi_sta_powersave_mode_cmd {
5820 /* unique id identifying the VDEV, generated by the caller */
5821 __le32 vdev_id;
5822
5823 /*
5824 * Power save mode
5825 * (see enum wmi_sta_ps_mode)
5826 */
5827 __le32 sta_ps_mode;
5828 } __packed;
5829
5830 enum wmi_csa_offload_en {
5831 WMI_CSA_OFFLOAD_DISABLE = 0,
5832 WMI_CSA_OFFLOAD_ENABLE = 1,
5833 };
5834
5835 struct wmi_csa_offload_enable_cmd {
5836 __le32 vdev_id;
5837 __le32 csa_offload_enable;
5838 } __packed;
5839
5840 struct wmi_csa_offload_chanswitch_cmd {
5841 __le32 vdev_id;
5842 struct wmi_channel chan;
5843 } __packed;
5844
5845 /*
5846 * This parameter controls the policy for retrieving frames from AP while the
5847 * STA is in sleep state.
5848 *
5849 * Only takes affect if the sta_ps_mode is enabled
5850 */
5851 enum wmi_sta_ps_param_rx_wake_policy {
5852 /*
5853 * Wake up when ever there is an RX activity on the VDEV. In this mode
5854 * the Power save SM(state machine) will come out of sleep by either
5855 * sending null frame (or) a data frame (with PS==0) in response to TIM
5856 * bit set in the received beacon frame from AP.
5857 */
5858 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0,
5859
5860 /*
5861 * Here the power save state machine will not wakeup in response to TIM
5862 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD
5863 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all
5864 * access categories are delivery-enabled, the station will send a
5865 * UAPSD trigger frame, otherwise it will send a PS-Poll.
5866 */
5867 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1,
5868 };
5869
5870 /*
5871 * Number of tx frames/beacon that cause the power save SM to wake up.
5872 *
5873 * Value 1 causes the SM to wake up for every TX. Value 0 has a special
5874 * meaning, It will cause the SM to never wake up. This is useful if you want
5875 * to keep the system to sleep all the time for some kind of test mode . host
5876 * can change this parameter any time. It will affect at the next tx frame.
5877 */
5878 enum wmi_sta_ps_param_tx_wake_threshold {
5879 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0,
5880 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1,
5881
5882 /*
5883 * Values greater than one indicate that many TX attempts per beacon
5884 * interval before the STA will wake up
5885 */
5886 };
5887
5888 /*
5889 * The maximum number of PS-Poll frames the FW will send in response to
5890 * traffic advertised in TIM before waking up (by sending a null frame with PS
5891 * = 0). Value 0 has a special meaning: there is no maximum count and the FW
5892 * will send as many PS-Poll as are necessary to retrieve buffered BU. This
5893 * parameter is used when the RX wake policy is
5894 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake
5895 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE.
5896 */
5897 enum wmi_sta_ps_param_pspoll_count {
5898 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0,
5899 /*
5900 * Values greater than 0 indicate the maximum numer of PS-Poll frames
5901 * FW will send before waking up.
5902 */
5903
5904 /* When u-APSD is enabled the firmware will be very reluctant to exit
5905 * STA PS. This could result in very poor Rx performance with STA doing
5906 * PS-Poll for each and every buffered frame. This value is a bit
5907 * arbitrary.
5908 */
5909 WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3,
5910 };
5911
5912 /*
5913 * This will include the delivery and trigger enabled state for every AC.
5914 * This is the negotiated state with AP. The host MLME needs to set this based
5915 * on AP capability and the state Set in the association request by the
5916 * station MLME.Lower 8 bits of the value specify the UAPSD configuration.
5917 */
5918 #define WMI_UAPSD_AC_TYPE_DELI 0
5919 #define WMI_UAPSD_AC_TYPE_TRIG 1
5920
5921 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \
5922 (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1))
5923
5924 enum wmi_sta_ps_param_uapsd {
5925 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
5926 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1),
5927 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
5928 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3),
5929 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
5930 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5),
5931 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
5932 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7),
5933 };
5934
5935 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX
5936
5937 struct wmi_sta_uapsd_auto_trig_param {
5938 __le32 wmm_ac;
5939 __le32 user_priority;
5940 __le32 service_interval;
5941 __le32 suspend_interval;
5942 __le32 delay_interval;
5943 };
5944
5945 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param {
5946 __le32 vdev_id;
5947 struct wmi_mac_addr peer_macaddr;
5948 __le32 num_ac;
5949 };
5950
5951 struct wmi_sta_uapsd_auto_trig_arg {
5952 u32 wmm_ac;
5953 u32 user_priority;
5954 u32 service_interval;
5955 u32 suspend_interval;
5956 u32 delay_interval;
5957 };
5958
5959 enum wmi_sta_powersave_param {
5960 /*
5961 * Controls how frames are retrievd from AP while STA is sleeping
5962 *
5963 * (see enum wmi_sta_ps_param_rx_wake_policy)
5964 */
5965 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0,
5966
5967 /*
5968 * The STA will go active after this many TX
5969 *
5970 * (see enum wmi_sta_ps_param_tx_wake_threshold)
5971 */
5972 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1,
5973
5974 /*
5975 * Number of PS-Poll to send before STA wakes up
5976 *
5977 * (see enum wmi_sta_ps_param_pspoll_count)
5978 *
5979 */
5980 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2,
5981
5982 /*
5983 * TX/RX inactivity time in msec before going to sleep.
5984 *
5985 * The power save SM will monitor tx/rx activity on the VDEV, if no
5986 * activity for the specified msec of the parameter the Power save
5987 * SM will go to sleep.
5988 */
5989 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3,
5990
5991 /*
5992 * Set uapsd configuration.
5993 *
5994 * (see enum wmi_sta_ps_param_uapsd)
5995 */
5996 WMI_STA_PS_PARAM_UAPSD = 4,
5997 };
5998
5999 struct wmi_sta_powersave_param_cmd {
6000 __le32 vdev_id;
6001 __le32 param_id; /* %WMI_STA_PS_PARAM_ */
6002 __le32 param_value;
6003 } __packed;
6004
6005 /* No MIMO power save */
6006 #define WMI_STA_MIMO_PS_MODE_DISABLE
6007 /* mimo powersave mode static*/
6008 #define WMI_STA_MIMO_PS_MODE_STATIC
6009 /* mimo powersave mode dynamic */
6010 #define WMI_STA_MIMO_PS_MODE_DYNAMIC
6011
6012 struct wmi_sta_mimo_ps_mode_cmd {
6013 /* unique id identifying the VDEV, generated by the caller */
6014 __le32 vdev_id;
6015 /* mimo powersave mode as defined above */
6016 __le32 mimo_pwrsave_mode;
6017 } __packed;
6018
6019 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */
6020 enum wmi_ap_ps_param_uapsd {
6021 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
6022 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1),
6023 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
6024 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3),
6025 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
6026 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5),
6027 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
6028 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7),
6029 };
6030
6031 /* U-APSD maximum service period of peer station */
6032 enum wmi_ap_ps_peer_param_max_sp {
6033 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0,
6034 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1,
6035 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2,
6036 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3,
6037 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP,
6038 };
6039
6040 /*
6041 * AP power save parameter
6042 * Set a power save specific parameter for a peer station
6043 */
6044 enum wmi_ap_ps_peer_param {
6045 /* Set uapsd configuration for a given peer.
6046 *
6047 * Include the delivery and trigger enabled state for every AC.
6048 * The host MLME needs to set this based on AP capability and stations
6049 * request Set in the association request received from the station.
6050 *
6051 * Lower 8 bits of the value specify the UAPSD configuration.
6052 *
6053 * (see enum wmi_ap_ps_param_uapsd)
6054 * The default value is 0.
6055 */
6056 WMI_AP_PS_PEER_PARAM_UAPSD = 0,
6057
6058 /*
6059 * Set the service period for a UAPSD capable station
6060 *
6061 * The service period from wme ie in the (re)assoc request frame.
6062 *
6063 * (see enum wmi_ap_ps_peer_param_max_sp)
6064 */
6065 WMI_AP_PS_PEER_PARAM_MAX_SP = 1,
6066
6067 /* Time in seconds for aging out buffered frames for STA in PS */
6068 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,
6069 };
6070
6071 struct wmi_ap_ps_peer_cmd {
6072 /* unique id identifying the VDEV, generated by the caller */
6073 __le32 vdev_id;
6074
6075 /* peer MAC address */
6076 struct wmi_mac_addr peer_macaddr;
6077
6078 /* AP powersave param (see enum wmi_ap_ps_peer_param) */
6079 __le32 param_id;
6080
6081 /* AP powersave param value */
6082 __le32 param_value;
6083 } __packed;
6084
6085 /* 128 clients = 4 words */
6086 #define WMI_TIM_BITMAP_ARRAY_SIZE 4
6087
6088 struct wmi_tim_info {
6089 __le32 tim_len;
6090 __le32 tim_mcast;
6091 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE];
6092 __le32 tim_changed;
6093 __le32 tim_num_ps_pending;
6094 } __packed;
6095
6096 struct wmi_tim_info_arg {
6097 __le32 tim_len;
6098 __le32 tim_mcast;
6099 const __le32 *tim_bitmap;
6100 __le32 tim_changed;
6101 __le32 tim_num_ps_pending;
6102 } __packed;
6103
6104 /* Maximum number of NOA Descriptors supported */
6105 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4
6106 #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0)
6107 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1
6108 #define WMI_P2P_NOA_CHANGED_BIT BIT(0)
6109
6110 struct wmi_p2p_noa_info {
6111 /* Bit 0 - Flag to indicate an update in NOA schedule
6112 * Bits 7-1 - Reserved
6113 */
6114 u8 changed;
6115 /* NOA index */
6116 u8 index;
6117 /* Bit 0 - Opp PS state of the AP
6118 * Bits 1-7 - Ctwindow in TUs
6119 */
6120 u8 ctwindow_oppps;
6121 /* Number of NOA descriptors */
6122 u8 num_descriptors;
6123
6124 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];
6125 } __packed;
6126
6127 struct wmi_bcn_info {
6128 struct wmi_tim_info tim_info;
6129 struct wmi_p2p_noa_info p2p_noa_info;
6130 } __packed;
6131
6132 struct wmi_host_swba_event {
6133 __le32 vdev_map;
6134 struct wmi_bcn_info bcn_info[];
6135 } __packed;
6136
6137 struct wmi_10_2_4_bcn_info {
6138 struct wmi_tim_info tim_info;
6139 /* The 10.2.4 FW doesn't have p2p NOA info */
6140 } __packed;
6141
6142 struct wmi_10_2_4_host_swba_event {
6143 __le32 vdev_map;
6144 struct wmi_10_2_4_bcn_info bcn_info[];
6145 } __packed;
6146
6147 /* 16 words = 512 client + 1 word = for guard */
6148 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17
6149
6150 struct wmi_10_4_tim_info {
6151 __le32 tim_len;
6152 __le32 tim_mcast;
6153 __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE];
6154 __le32 tim_changed;
6155 __le32 tim_num_ps_pending;
6156 } __packed;
6157
6158 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1
6159
6160 struct wmi_10_4_p2p_noa_info {
6161 /* Bit 0 - Flag to indicate an update in NOA schedule
6162 * Bits 7-1 - Reserved
6163 */
6164 u8 changed;
6165 /* NOA index */
6166 u8 index;
6167 /* Bit 0 - Opp PS state of the AP
6168 * Bits 1-7 - Ctwindow in TUs
6169 */
6170 u8 ctwindow_oppps;
6171 /* Number of NOA descriptors */
6172 u8 num_descriptors;
6173
6174 struct wmi_p2p_noa_descriptor
6175 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS];
6176 } __packed;
6177
6178 struct wmi_10_4_bcn_info {
6179 struct wmi_10_4_tim_info tim_info;
6180 struct wmi_10_4_p2p_noa_info p2p_noa_info;
6181 } __packed;
6182
6183 struct wmi_10_4_host_swba_event {
6184 __le32 vdev_map;
6185 struct wmi_10_4_bcn_info bcn_info[];
6186 } __packed;
6187
6188 #define WMI_MAX_AP_VDEV 16
6189
6190 struct wmi_tbtt_offset_event {
6191 __le32 vdev_map;
6192 __le32 tbttoffset_list[WMI_MAX_AP_VDEV];
6193 } __packed;
6194
6195 struct wmi_peer_create_cmd {
6196 __le32 vdev_id;
6197 struct wmi_mac_addr peer_macaddr;
6198 __le32 peer_type;
6199 } __packed;
6200
6201 enum wmi_peer_type {
6202 WMI_PEER_TYPE_DEFAULT = 0,
6203 WMI_PEER_TYPE_BSS = 1,
6204 WMI_PEER_TYPE_TDLS = 2,
6205 };
6206
6207 struct wmi_peer_delete_cmd {
6208 __le32 vdev_id;
6209 struct wmi_mac_addr peer_macaddr;
6210 } __packed;
6211
6212 struct wmi_peer_flush_tids_cmd {
6213 __le32 vdev_id;
6214 struct wmi_mac_addr peer_macaddr;
6215 __le32 peer_tid_bitmap;
6216 } __packed;
6217
6218 struct wmi_fixed_rate {
6219 /*
6220 * rate mode . 0: disable fixed rate (auto rate)
6221 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps
6222 * 2: ht20 11n rate specified as mcs index
6223 * 3: ht40 11n rate specified as mcs index
6224 */
6225 __le32 rate_mode;
6226 /*
6227 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)
6228 * and series 3 is stored at byte 3 (MSB)
6229 */
6230 __le32 rate_series;
6231 /*
6232 * 4 retry counts for 4 rate series. retry count for rate 0 is stored
6233 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3
6234 * (MSB)
6235 */
6236 __le32 rate_retries;
6237 } __packed;
6238
6239 struct wmi_peer_fixed_rate_cmd {
6240 /* unique id identifying the VDEV, generated by the caller */
6241 __le32 vdev_id;
6242 /* peer MAC address */
6243 struct wmi_mac_addr peer_macaddr;
6244 /* fixed rate */
6245 struct wmi_fixed_rate peer_fixed_rate;
6246 } __packed;
6247
6248 #define WMI_MGMT_TID 17
6249
6250 struct wmi_addba_clear_resp_cmd {
6251 /* unique id identifying the VDEV, generated by the caller */
6252 __le32 vdev_id;
6253 /* peer MAC address */
6254 struct wmi_mac_addr peer_macaddr;
6255 } __packed;
6256
6257 struct wmi_addba_send_cmd {
6258 /* unique id identifying the VDEV, generated by the caller */
6259 __le32 vdev_id;
6260 /* peer MAC address */
6261 struct wmi_mac_addr peer_macaddr;
6262 /* Tid number */
6263 __le32 tid;
6264 /* Buffer/Window size*/
6265 __le32 buffersize;
6266 } __packed;
6267
6268 struct wmi_delba_send_cmd {
6269 /* unique id identifying the VDEV, generated by the caller */
6270 __le32 vdev_id;
6271 /* peer MAC address */
6272 struct wmi_mac_addr peer_macaddr;
6273 /* Tid number */
6274 __le32 tid;
6275 /* Is Initiator */
6276 __le32 initiator;
6277 /* Reason code */
6278 __le32 reasoncode;
6279 } __packed;
6280
6281 struct wmi_addba_setresponse_cmd {
6282 /* unique id identifying the vdev, generated by the caller */
6283 __le32 vdev_id;
6284 /* peer mac address */
6285 struct wmi_mac_addr peer_macaddr;
6286 /* Tid number */
6287 __le32 tid;
6288 /* status code */
6289 __le32 statuscode;
6290 } __packed;
6291
6292 struct wmi_send_singleamsdu_cmd {
6293 /* unique id identifying the vdev, generated by the caller */
6294 __le32 vdev_id;
6295 /* peer mac address */
6296 struct wmi_mac_addr peer_macaddr;
6297 /* Tid number */
6298 __le32 tid;
6299 } __packed;
6300
6301 enum wmi_peer_smps_state {
6302 WMI_PEER_SMPS_PS_NONE = 0x0,
6303 WMI_PEER_SMPS_STATIC = 0x1,
6304 WMI_PEER_SMPS_DYNAMIC = 0x2
6305 };
6306
6307 enum wmi_peer_chwidth {
6308 WMI_PEER_CHWIDTH_20MHZ = 0,
6309 WMI_PEER_CHWIDTH_40MHZ = 1,
6310 WMI_PEER_CHWIDTH_80MHZ = 2,
6311 WMI_PEER_CHWIDTH_160MHZ = 3,
6312 };
6313
6314 enum wmi_peer_param {
6315 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */
6316 WMI_PEER_AMPDU = 0x2,
6317 WMI_PEER_AUTHORIZE = 0x3,
6318 WMI_PEER_CHAN_WIDTH = 0x4,
6319 WMI_PEER_NSS = 0x5,
6320 WMI_PEER_USE_4ADDR = 0x6,
6321 WMI_PEER_USE_FIXED_PWR = 0x8,
6322 WMI_PEER_PARAM_FIXED_RATE = 0x9,
6323 WMI_PEER_DEBUG = 0xa,
6324 WMI_PEER_PHYMODE = 0xd,
6325 WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */
6326 };
6327
6328 struct wmi_peer_set_param_cmd {
6329 __le32 vdev_id;
6330 struct wmi_mac_addr peer_macaddr;
6331 __le32 param_id;
6332 __le32 param_value;
6333 } __packed;
6334
6335 #define MAX_SUPPORTED_RATES 128
6336
6337 struct wmi_rate_set {
6338 /* total number of rates */
6339 __le32 num_rates;
6340 /*
6341 * rates (each 8bit value) packed into a 32 bit word.
6342 * the rates are filled from least significant byte to most
6343 * significant byte.
6344 */
6345 __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1];
6346 } __packed;
6347
6348 struct wmi_rate_set_arg {
6349 unsigned int num_rates;
6350 u8 rates[MAX_SUPPORTED_RATES];
6351 };
6352
6353 /*
6354 * NOTE: It would bea good idea to represent the Tx MCS
6355 * info in one word and Rx in another word. This is split
6356 * into multiple words for convenience
6357 */
6358 struct wmi_vht_rate_set {
6359 __le32 rx_max_rate; /* Max Rx data rate */
6360 __le32 rx_mcs_set; /* Negotiated RX VHT rates */
6361 __le32 tx_max_rate; /* Max Tx data rate */
6362 __le32 tx_mcs_set; /* Negotiated TX VHT rates */
6363 } __packed;
6364
6365 struct wmi_vht_rate_set_arg {
6366 u32 rx_max_rate;
6367 u32 rx_mcs_set;
6368 u32 tx_max_rate;
6369 u32 tx_mcs_set;
6370 };
6371
6372 struct wmi_peer_set_rates_cmd {
6373 /* peer MAC address */
6374 struct wmi_mac_addr peer_macaddr;
6375 /* legacy rate set */
6376 struct wmi_rate_set peer_legacy_rates;
6377 /* ht rate set */
6378 struct wmi_rate_set peer_ht_rates;
6379 } __packed;
6380
6381 struct wmi_peer_set_q_empty_callback_cmd {
6382 /* unique id identifying the VDEV, generated by the caller */
6383 __le32 vdev_id;
6384 /* peer MAC address */
6385 struct wmi_mac_addr peer_macaddr;
6386 __le32 callback_enable;
6387 } __packed;
6388
6389 struct wmi_peer_flags_map {
6390 u32 auth;
6391 u32 qos;
6392 u32 need_ptk_4_way;
6393 u32 need_gtk_2_way;
6394 u32 apsd;
6395 u32 ht;
6396 u32 bw40;
6397 u32 stbc;
6398 u32 ldbc;
6399 u32 dyn_mimops;
6400 u32 static_mimops;
6401 u32 spatial_mux;
6402 u32 vht;
6403 u32 bw80;
6404 u32 vht_2g;
6405 u32 pmf;
6406 u32 bw160;
6407 };
6408
6409 enum wmi_peer_flags {
6410 WMI_PEER_AUTH = 0x00000001,
6411 WMI_PEER_QOS = 0x00000002,
6412 WMI_PEER_NEED_PTK_4_WAY = 0x00000004,
6413 WMI_PEER_NEED_GTK_2_WAY = 0x00000010,
6414 WMI_PEER_APSD = 0x00000800,
6415 WMI_PEER_HT = 0x00001000,
6416 WMI_PEER_40MHZ = 0x00002000,
6417 WMI_PEER_STBC = 0x00008000,
6418 WMI_PEER_LDPC = 0x00010000,
6419 WMI_PEER_DYN_MIMOPS = 0x00020000,
6420 WMI_PEER_STATIC_MIMOPS = 0x00040000,
6421 WMI_PEER_SPATIAL_MUX = 0x00200000,
6422 WMI_PEER_VHT = 0x02000000,
6423 WMI_PEER_80MHZ = 0x04000000,
6424 WMI_PEER_VHT_2G = 0x08000000,
6425 WMI_PEER_PMF = 0x10000000,
6426 WMI_PEER_160MHZ = 0x20000000
6427 };
6428
6429 enum wmi_10x_peer_flags {
6430 WMI_10X_PEER_AUTH = 0x00000001,
6431 WMI_10X_PEER_QOS = 0x00000002,
6432 WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004,
6433 WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010,
6434 WMI_10X_PEER_APSD = 0x00000800,
6435 WMI_10X_PEER_HT = 0x00001000,
6436 WMI_10X_PEER_40MHZ = 0x00002000,
6437 WMI_10X_PEER_STBC = 0x00008000,
6438 WMI_10X_PEER_LDPC = 0x00010000,
6439 WMI_10X_PEER_DYN_MIMOPS = 0x00020000,
6440 WMI_10X_PEER_STATIC_MIMOPS = 0x00040000,
6441 WMI_10X_PEER_SPATIAL_MUX = 0x00200000,
6442 WMI_10X_PEER_VHT = 0x02000000,
6443 WMI_10X_PEER_80MHZ = 0x04000000,
6444 WMI_10X_PEER_160MHZ = 0x20000000
6445 };
6446
6447 enum wmi_10_2_peer_flags {
6448 WMI_10_2_PEER_AUTH = 0x00000001,
6449 WMI_10_2_PEER_QOS = 0x00000002,
6450 WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004,
6451 WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010,
6452 WMI_10_2_PEER_APSD = 0x00000800,
6453 WMI_10_2_PEER_HT = 0x00001000,
6454 WMI_10_2_PEER_40MHZ = 0x00002000,
6455 WMI_10_2_PEER_STBC = 0x00008000,
6456 WMI_10_2_PEER_LDPC = 0x00010000,
6457 WMI_10_2_PEER_DYN_MIMOPS = 0x00020000,
6458 WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000,
6459 WMI_10_2_PEER_SPATIAL_MUX = 0x00200000,
6460 WMI_10_2_PEER_VHT = 0x02000000,
6461 WMI_10_2_PEER_80MHZ = 0x04000000,
6462 WMI_10_2_PEER_VHT_2G = 0x08000000,
6463 WMI_10_2_PEER_PMF = 0x10000000,
6464 WMI_10_2_PEER_160MHZ = 0x20000000
6465 };
6466
6467 /*
6468 * Peer rate capabilities.
6469 *
6470 * This is of interest to the ratecontrol
6471 * module which resides in the firmware. The bit definitions are
6472 * consistent with that defined in if_athrate.c.
6473 */
6474 #define WMI_RC_DS_FLAG 0x01
6475 #define WMI_RC_CW40_FLAG 0x02
6476 #define WMI_RC_SGI_FLAG 0x04
6477 #define WMI_RC_HT_FLAG 0x08
6478 #define WMI_RC_RTSCTS_FLAG 0x10
6479 #define WMI_RC_TX_STBC_FLAG 0x20
6480 #define WMI_RC_RX_STBC_FLAG 0xC0
6481 #define WMI_RC_RX_STBC_FLAG_S 6
6482 #define WMI_RC_WEP_TKIP_FLAG 0x100
6483 #define WMI_RC_TS_FLAG 0x200
6484 #define WMI_RC_UAPSD_FLAG 0x400
6485
6486 /* Maximum listen interval supported by hw in units of beacon interval */
6487 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5
6488
6489 struct wmi_common_peer_assoc_complete_cmd {
6490 struct wmi_mac_addr peer_macaddr;
6491 __le32 vdev_id;
6492 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */
6493 __le32 peer_associd; /* 16 LSBs */
6494 __le32 peer_flags;
6495 __le32 peer_caps; /* 16 LSBs */
6496 __le32 peer_listen_intval;
6497 __le32 peer_ht_caps;
6498 __le32 peer_max_mpdu;
6499 __le32 peer_mpdu_density; /* 0..16 */
6500 __le32 peer_rate_caps;
6501 struct wmi_rate_set peer_legacy_rates;
6502 struct wmi_rate_set peer_ht_rates;
6503 __le32 peer_nss; /* num of spatial streams */
6504 __le32 peer_vht_caps;
6505 __le32 peer_phymode;
6506 struct wmi_vht_rate_set peer_vht_rates;
6507 };
6508
6509 struct wmi_main_peer_assoc_complete_cmd {
6510 struct wmi_common_peer_assoc_complete_cmd cmd;
6511
6512 /* HT Operation Element of the peer. Five bytes packed in 2
6513 * INT32 array and filled from lsb to msb.
6514 */
6515 __le32 peer_ht_info[2];
6516 } __packed;
6517
6518 struct wmi_10_1_peer_assoc_complete_cmd {
6519 struct wmi_common_peer_assoc_complete_cmd cmd;
6520 } __packed;
6521
6522 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0
6523 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f
6524 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4
6525 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0
6526
6527 struct wmi_10_2_peer_assoc_complete_cmd {
6528 struct wmi_common_peer_assoc_complete_cmd cmd;
6529 __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
6530 } __packed;
6531
6532 /* NSS Mapping to FW */
6533 #define WMI_PEER_NSS_MAP_ENABLE BIT(31)
6534 #define WMI_PEER_NSS_160MHZ_MASK GENMASK(2, 0)
6535 #define WMI_PEER_NSS_80_80MHZ_MASK GENMASK(5, 3)
6536
6537 struct wmi_10_4_peer_assoc_complete_cmd {
6538 struct wmi_10_2_peer_assoc_complete_cmd cmd;
6539 __le32 peer_bw_rxnss_override;
6540 } __packed;
6541
6542 struct wmi_peer_assoc_complete_arg {
6543 u8 addr[ETH_ALEN];
6544 u32 vdev_id;
6545 bool peer_reassoc;
6546 u16 peer_aid;
6547 u32 peer_flags; /* see %WMI_PEER_ */
6548 u16 peer_caps;
6549 u32 peer_listen_intval;
6550 u32 peer_ht_caps;
6551 u32 peer_max_mpdu;
6552 u32 peer_mpdu_density; /* 0..16 */
6553 u32 peer_rate_caps; /* see %WMI_RC_ */
6554 struct wmi_rate_set_arg peer_legacy_rates;
6555 struct wmi_rate_set_arg peer_ht_rates;
6556 u32 peer_num_spatial_streams;
6557 u32 peer_vht_caps;
6558 enum wmi_phy_mode peer_phymode;
6559 struct wmi_vht_rate_set_arg peer_vht_rates;
6560 u32 peer_bw_rxnss_override;
6561 };
6562
6563 struct wmi_peer_add_wds_entry_cmd {
6564 /* peer MAC address */
6565 struct wmi_mac_addr peer_macaddr;
6566 /* wds MAC addr */
6567 struct wmi_mac_addr wds_macaddr;
6568 } __packed;
6569
6570 struct wmi_peer_remove_wds_entry_cmd {
6571 /* wds MAC addr */
6572 struct wmi_mac_addr wds_macaddr;
6573 } __packed;
6574
6575 struct wmi_peer_q_empty_callback_event {
6576 /* peer MAC address */
6577 struct wmi_mac_addr peer_macaddr;
6578 } __packed;
6579
6580 /*
6581 * Channel info WMI event
6582 */
6583 struct wmi_chan_info_event {
6584 __le32 err_code;
6585 __le32 freq;
6586 __le32 cmd_flags;
6587 __le32 noise_floor;
6588 __le32 rx_clear_count;
6589 __le32 cycle_count;
6590 } __packed;
6591
6592 struct wmi_10_4_chan_info_event {
6593 __le32 err_code;
6594 __le32 freq;
6595 __le32 cmd_flags;
6596 __le32 noise_floor;
6597 __le32 rx_clear_count;
6598 __le32 cycle_count;
6599 __le32 chan_tx_pwr_range;
6600 __le32 chan_tx_pwr_tp;
6601 __le32 rx_frame_count;
6602 } __packed;
6603
6604 struct wmi_peer_sta_kickout_event {
6605 struct wmi_mac_addr peer_macaddr;
6606 } __packed;
6607
6608 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
6609 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1)
6610
6611 /* Beacon filter wmi command info */
6612 #define BCN_FLT_MAX_SUPPORTED_IES 256
6613 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32)
6614
6615 struct bss_bcn_stats {
6616 __le32 vdev_id;
6617 __le32 bss_bcnsdropped;
6618 __le32 bss_bcnsdelivered;
6619 } __packed;
6620
6621 struct bcn_filter_stats {
6622 __le32 bcns_dropped;
6623 __le32 bcns_delivered;
6624 __le32 activefilters;
6625 struct bss_bcn_stats bss_stats;
6626 } __packed;
6627
6628 struct wmi_add_bcn_filter_cmd {
6629 u32 vdev_id;
6630 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST];
6631 } __packed;
6632
6633 enum wmi_sta_keepalive_method {
6634 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1,
6635 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2,
6636 };
6637
6638 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0
6639
6640 /* Firmware crashes if keepalive interval exceeds this limit */
6641 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff
6642
6643 /* note: ip4 addresses are in network byte order, i.e. big endian */
6644 struct wmi_sta_keepalive_arp_resp {
6645 __be32 src_ip4_addr;
6646 __be32 dest_ip4_addr;
6647 struct wmi_mac_addr dest_mac_addr;
6648 } __packed;
6649
6650 struct wmi_sta_keepalive_cmd {
6651 __le32 vdev_id;
6652 __le32 enabled;
6653 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */
6654 __le32 interval; /* in seconds */
6655 struct wmi_sta_keepalive_arp_resp arp_resp;
6656 } __packed;
6657
6658 struct wmi_sta_keepalive_arg {
6659 u32 vdev_id;
6660 u32 enabled;
6661 u32 method;
6662 u32 interval;
6663 __be32 src_ip4_addr;
6664 __be32 dest_ip4_addr;
6665 const u8 dest_mac_addr[ETH_ALEN];
6666 };
6667
6668 enum wmi_force_fw_hang_type {
6669 WMI_FORCE_FW_HANG_ASSERT = 1,
6670 WMI_FORCE_FW_HANG_NO_DETECT,
6671 WMI_FORCE_FW_HANG_CTRL_EP_FULL,
6672 WMI_FORCE_FW_HANG_EMPTY_POINT,
6673 WMI_FORCE_FW_HANG_STACK_OVERFLOW,
6674 WMI_FORCE_FW_HANG_INFINITE_LOOP,
6675 };
6676
6677 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF
6678
6679 struct wmi_force_fw_hang_cmd {
6680 __le32 type;
6681 __le32 delay_ms;
6682 } __packed;
6683
6684 enum wmi_pdev_reset_mode_type {
6685 WMI_RST_MODE_TX_FLUSH = 1,
6686 WMI_RST_MODE_WARM_RESET,
6687 WMI_RST_MODE_COLD_RESET,
6688 WMI_RST_MODE_WARM_RESET_RESTORE_CAL,
6689 WMI_RST_MODE_COLD_RESET_RESTORE_CAL,
6690 WMI_RST_MODE_MAX,
6691 };
6692
6693 enum ath10k_dbglog_level {
6694 ATH10K_DBGLOG_LEVEL_VERBOSE = 0,
6695 ATH10K_DBGLOG_LEVEL_INFO = 1,
6696 ATH10K_DBGLOG_LEVEL_WARN = 2,
6697 ATH10K_DBGLOG_LEVEL_ERR = 3,
6698 };
6699
6700 /* VAP ids to enable dbglog */
6701 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0
6702 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff
6703
6704 /* to enable dbglog in the firmware */
6705 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16
6706 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000
6707
6708 /* timestamp resolution */
6709 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17
6710 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000
6711
6712 /* number of queued messages before sending them to the host */
6713 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20
6714 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000
6715
6716 /*
6717 * Log levels to enable. This defines the minimum level to enable, this is
6718 * not a bitmask. See enum ath10k_dbglog_level for the values.
6719 */
6720 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28
6721 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000
6722
6723 /*
6724 * Note: this is a cleaned up version of a struct firmware uses. For
6725 * example, config_valid was hidden inside an array.
6726 */
6727 struct wmi_dbglog_cfg_cmd {
6728 /* bitmask to hold mod id config*/
6729 __le32 module_enable;
6730
6731 /* see ATH10K_DBGLOG_CFG_ */
6732 __le32 config_enable;
6733
6734 /* mask of module id bits to be changed */
6735 __le32 module_valid;
6736
6737 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6738 __le32 config_valid;
6739 } __packed;
6740
6741 struct wmi_10_4_dbglog_cfg_cmd {
6742 /* bitmask to hold mod id config*/
6743 __le64 module_enable;
6744
6745 /* see ATH10K_DBGLOG_CFG_ */
6746 __le32 config_enable;
6747
6748 /* mask of module id bits to be changed */
6749 __le64 module_valid;
6750
6751 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6752 __le32 config_valid;
6753 } __packed;
6754
6755 enum wmi_roam_reason {
6756 WMI_ROAM_REASON_BETTER_AP = 1,
6757 WMI_ROAM_REASON_BEACON_MISS = 2,
6758 WMI_ROAM_REASON_LOW_RSSI = 3,
6759 WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4,
6760 WMI_ROAM_REASON_HO_FAILED = 5,
6761
6762 /* keep last */
6763 WMI_ROAM_REASON_MAX,
6764 };
6765
6766 struct wmi_roam_ev {
6767 __le32 vdev_id;
6768 __le32 reason;
6769 } __packed;
6770
6771 #define ATH10K_FRAGMT_THRESHOLD_MIN 540
6772 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346
6773
6774 #define WMI_MAX_EVENT 0x1000
6775 /* Maximum number of pending TXed WMI packets */
6776 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr)
6777
6778 /* By default disable power save for IBSS */
6779 #define ATH10K_DEFAULT_ATIM 0
6780
6781 #define WMI_MAX_MEM_REQS 16
6782
6783 struct wmi_scan_ev_arg {
6784 __le32 event_type; /* %WMI_SCAN_EVENT_ */
6785 __le32 reason; /* %WMI_SCAN_REASON_ */
6786 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
6787 __le32 scan_req_id;
6788 __le32 scan_id;
6789 __le32 vdev_id;
6790 };
6791
6792 struct mgmt_tx_compl_params {
6793 u32 desc_id;
6794 u32 status;
6795 u32 ppdu_id;
6796 int ack_rssi;
6797 };
6798
6799 struct wmi_tlv_mgmt_tx_compl_ev_arg {
6800 __le32 desc_id;
6801 __le32 status;
6802 __le32 pdev_id;
6803 __le32 ppdu_id;
6804 __le32 ack_rssi;
6805 };
6806
6807 struct wmi_tlv_mgmt_tx_bundle_compl_ev_arg {
6808 __le32 num_reports;
6809 const __le32 *desc_ids;
6810 const __le32 *status;
6811 const __le32 *ppdu_ids;
6812 const __le32 *ack_rssi;
6813 };
6814
6815 struct wmi_peer_delete_resp_ev_arg {
6816 __le32 vdev_id;
6817 struct wmi_mac_addr peer_addr;
6818 };
6819
6820 #define WMI_MGMT_RX_NUM_RSSI 4
6821 struct wmi_mgmt_rx_ev_arg {
6822 __le32 channel;
6823 __le32 snr;
6824 __le32 rate;
6825 __le32 phy_mode;
6826 __le32 buf_len;
6827 __le32 status; /* %WMI_RX_STATUS_ */
6828 struct wmi_mgmt_rx_ext_info ext_info;
6829 __le32 rssi[WMI_MGMT_RX_NUM_RSSI];
6830 };
6831
6832 struct wmi_ch_info_ev_arg {
6833 __le32 err_code;
6834 __le32 freq;
6835 __le32 cmd_flags;
6836 __le32 noise_floor;
6837 __le32 rx_clear_count;
6838 __le32 cycle_count;
6839 __le32 chan_tx_pwr_range;
6840 __le32 chan_tx_pwr_tp;
6841 __le32 rx_frame_count;
6842 __le32 my_bss_rx_cycle_count;
6843 __le32 rx_11b_mode_data_duration;
6844 __le32 tx_frame_cnt;
6845 __le32 mac_clk_mhz;
6846 };
6847
6848 /* From 10.4 firmware, not sure all have the same values. */
6849 enum wmi_vdev_start_status {
6850 WMI_VDEV_START_OK = 0,
6851 WMI_VDEV_START_CHAN_INVALID,
6852 };
6853
6854 struct wmi_vdev_start_ev_arg {
6855 __le32 vdev_id;
6856 __le32 req_id;
6857 __le32 resp_type; /* %WMI_VDEV_RESP_ */
6858 __le32 status; /* See wmi_vdev_start_status enum above */
6859 };
6860
6861 struct wmi_peer_kick_ev_arg {
6862 const u8 *mac_addr;
6863 };
6864
6865 struct wmi_swba_ev_arg {
6866 __le32 vdev_map;
6867 struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV];
6868 const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV];
6869 };
6870
6871 struct wmi_phyerr_ev_arg {
6872 u32 tsf_timestamp;
6873 u16 freq1;
6874 u16 freq2;
6875 u8 rssi_combined;
6876 u8 chan_width_mhz;
6877 u8 phy_err_code;
6878 u16 nf_chains[4];
6879 u32 buf_len;
6880 const u8 *buf;
6881 u8 hdr_len;
6882 };
6883
6884 struct wmi_phyerr_hdr_arg {
6885 u32 num_phyerrs;
6886 u32 tsf_l32;
6887 u32 tsf_u32;
6888 u32 buf_len;
6889 const void *phyerrs;
6890 };
6891
6892 struct wmi_dfs_status_ev_arg {
6893 u32 status;
6894 };
6895
6896 struct wmi_svc_rdy_ev_arg {
6897 __le32 min_tx_power;
6898 __le32 max_tx_power;
6899 __le32 ht_cap;
6900 __le32 vht_cap;
6901 __le32 vht_supp_mcs;
6902 __le32 sw_ver0;
6903 __le32 sw_ver1;
6904 __le32 fw_build;
6905 __le32 phy_capab;
6906 __le32 num_rf_chains;
6907 __le32 eeprom_rd;
6908 __le32 num_mem_reqs;
6909 __le32 low_2ghz_chan;
6910 __le32 high_2ghz_chan;
6911 __le32 low_5ghz_chan;
6912 __le32 high_5ghz_chan;
6913 __le32 sys_cap_info;
6914 const __le32 *service_map;
6915 size_t service_map_len;
6916 const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS];
6917 };
6918
6919 struct wmi_svc_avail_ev_arg {
6920 bool service_map_ext_valid;
6921 __le32 service_map_ext_len;
6922 const __le32 *service_map_ext;
6923 };
6924
6925 struct wmi_rdy_ev_arg {
6926 __le32 sw_version;
6927 __le32 abi_version;
6928 __le32 status;
6929 const u8 *mac_addr;
6930 };
6931
6932 struct wmi_roam_ev_arg {
6933 __le32 vdev_id;
6934 __le32 reason;
6935 __le32 rssi;
6936 };
6937
6938 struct wmi_echo_ev_arg {
6939 __le32 value;
6940 };
6941
6942 struct wmi_pdev_temperature_event {
6943 /* temperature value in Celcius degree */
6944 __le32 temperature;
6945 } __packed;
6946
6947 struct wmi_pdev_bss_chan_info_event {
6948 __le32 freq;
6949 __le32 noise_floor;
6950 __le64 cycle_busy;
6951 __le64 cycle_total;
6952 __le64 cycle_tx;
6953 __le64 cycle_rx;
6954 __le64 cycle_rx_bss;
6955 __le32 reserved;
6956 } __packed;
6957
6958 /* WOW structures */
6959 enum wmi_wow_wakeup_event {
6960 WOW_BMISS_EVENT = 0,
6961 WOW_BETTER_AP_EVENT,
6962 WOW_DEAUTH_RECVD_EVENT,
6963 WOW_MAGIC_PKT_RECVD_EVENT,
6964 WOW_GTK_ERR_EVENT,
6965 WOW_FOURWAY_HSHAKE_EVENT,
6966 WOW_EAPOL_RECVD_EVENT,
6967 WOW_NLO_DETECTED_EVENT,
6968 WOW_DISASSOC_RECVD_EVENT,
6969 WOW_PATTERN_MATCH_EVENT,
6970 WOW_CSA_IE_EVENT,
6971 WOW_PROBE_REQ_WPS_IE_EVENT,
6972 WOW_AUTH_REQ_EVENT,
6973 WOW_ASSOC_REQ_EVENT,
6974 WOW_HTT_EVENT,
6975 WOW_RA_MATCH_EVENT,
6976 WOW_HOST_AUTO_SHUTDOWN_EVENT,
6977 WOW_IOAC_MAGIC_EVENT,
6978 WOW_IOAC_SHORT_EVENT,
6979 WOW_IOAC_EXTEND_EVENT,
6980 WOW_IOAC_TIMER_EVENT,
6981 WOW_DFS_PHYERR_RADAR_EVENT,
6982 WOW_BEACON_EVENT,
6983 WOW_CLIENT_KICKOUT_EVENT,
6984 WOW_EVENT_MAX,
6985 };
6986
6987 #define C2S(x) case x: return #x
6988
6989 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev)
6990 {
6991 switch (ev) {
6992 C2S(WOW_BMISS_EVENT);
6993 C2S(WOW_BETTER_AP_EVENT);
6994 C2S(WOW_DEAUTH_RECVD_EVENT);
6995 C2S(WOW_MAGIC_PKT_RECVD_EVENT);
6996 C2S(WOW_GTK_ERR_EVENT);
6997 C2S(WOW_FOURWAY_HSHAKE_EVENT);
6998 C2S(WOW_EAPOL_RECVD_EVENT);
6999 C2S(WOW_NLO_DETECTED_EVENT);
7000 C2S(WOW_DISASSOC_RECVD_EVENT);
7001 C2S(WOW_PATTERN_MATCH_EVENT);
7002 C2S(WOW_CSA_IE_EVENT);
7003 C2S(WOW_PROBE_REQ_WPS_IE_EVENT);
7004 C2S(WOW_AUTH_REQ_EVENT);
7005 C2S(WOW_ASSOC_REQ_EVENT);
7006 C2S(WOW_HTT_EVENT);
7007 C2S(WOW_RA_MATCH_EVENT);
7008 C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT);
7009 C2S(WOW_IOAC_MAGIC_EVENT);
7010 C2S(WOW_IOAC_SHORT_EVENT);
7011 C2S(WOW_IOAC_EXTEND_EVENT);
7012 C2S(WOW_IOAC_TIMER_EVENT);
7013 C2S(WOW_DFS_PHYERR_RADAR_EVENT);
7014 C2S(WOW_BEACON_EVENT);
7015 C2S(WOW_CLIENT_KICKOUT_EVENT);
7016 C2S(WOW_EVENT_MAX);
7017 default:
7018 return NULL;
7019 }
7020 }
7021
7022 enum wmi_wow_wake_reason {
7023 WOW_REASON_UNSPECIFIED = -1,
7024 WOW_REASON_NLOD = 0,
7025 WOW_REASON_AP_ASSOC_LOST,
7026 WOW_REASON_LOW_RSSI,
7027 WOW_REASON_DEAUTH_RECVD,
7028 WOW_REASON_DISASSOC_RECVD,
7029 WOW_REASON_GTK_HS_ERR,
7030 WOW_REASON_EAP_REQ,
7031 WOW_REASON_FOURWAY_HS_RECV,
7032 WOW_REASON_TIMER_INTR_RECV,
7033 WOW_REASON_PATTERN_MATCH_FOUND,
7034 WOW_REASON_RECV_MAGIC_PATTERN,
7035 WOW_REASON_P2P_DISC,
7036 WOW_REASON_WLAN_HB,
7037 WOW_REASON_CSA_EVENT,
7038 WOW_REASON_PROBE_REQ_WPS_IE_RECV,
7039 WOW_REASON_AUTH_REQ_RECV,
7040 WOW_REASON_ASSOC_REQ_RECV,
7041 WOW_REASON_HTT_EVENT,
7042 WOW_REASON_RA_MATCH,
7043 WOW_REASON_HOST_AUTO_SHUTDOWN,
7044 WOW_REASON_IOAC_MAGIC_EVENT,
7045 WOW_REASON_IOAC_SHORT_EVENT,
7046 WOW_REASON_IOAC_EXTEND_EVENT,
7047 WOW_REASON_IOAC_TIMER_EVENT,
7048 WOW_REASON_ROAM_HO,
7049 WOW_REASON_DFS_PHYERR_RADADR_EVENT,
7050 WOW_REASON_BEACON_RECV,
7051 WOW_REASON_CLIENT_KICKOUT_EVENT,
7052 WOW_REASON_DEBUG_TEST = 0xFF,
7053 };
7054
7055 static inline const char *wow_reason(enum wmi_wow_wake_reason reason)
7056 {
7057 switch (reason) {
7058 C2S(WOW_REASON_UNSPECIFIED);
7059 C2S(WOW_REASON_NLOD);
7060 C2S(WOW_REASON_AP_ASSOC_LOST);
7061 C2S(WOW_REASON_LOW_RSSI);
7062 C2S(WOW_REASON_DEAUTH_RECVD);
7063 C2S(WOW_REASON_DISASSOC_RECVD);
7064 C2S(WOW_REASON_GTK_HS_ERR);
7065 C2S(WOW_REASON_EAP_REQ);
7066 C2S(WOW_REASON_FOURWAY_HS_RECV);
7067 C2S(WOW_REASON_TIMER_INTR_RECV);
7068 C2S(WOW_REASON_PATTERN_MATCH_FOUND);
7069 C2S(WOW_REASON_RECV_MAGIC_PATTERN);
7070 C2S(WOW_REASON_P2P_DISC);
7071 C2S(WOW_REASON_WLAN_HB);
7072 C2S(WOW_REASON_CSA_EVENT);
7073 C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV);
7074 C2S(WOW_REASON_AUTH_REQ_RECV);
7075 C2S(WOW_REASON_ASSOC_REQ_RECV);
7076 C2S(WOW_REASON_HTT_EVENT);
7077 C2S(WOW_REASON_RA_MATCH);
7078 C2S(WOW_REASON_HOST_AUTO_SHUTDOWN);
7079 C2S(WOW_REASON_IOAC_MAGIC_EVENT);
7080 C2S(WOW_REASON_IOAC_SHORT_EVENT);
7081 C2S(WOW_REASON_IOAC_EXTEND_EVENT);
7082 C2S(WOW_REASON_IOAC_TIMER_EVENT);
7083 C2S(WOW_REASON_ROAM_HO);
7084 C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT);
7085 C2S(WOW_REASON_BEACON_RECV);
7086 C2S(WOW_REASON_CLIENT_KICKOUT_EVENT);
7087 C2S(WOW_REASON_DEBUG_TEST);
7088 default:
7089 return NULL;
7090 }
7091 }
7092
7093 #undef C2S
7094
7095 struct wmi_wow_ev_arg {
7096 u32 vdev_id;
7097 u32 flag;
7098 enum wmi_wow_wake_reason wake_reason;
7099 u32 data_len;
7100 };
7101
7102 #define WOW_MIN_PATTERN_SIZE 1
7103 #define WOW_MAX_PATTERN_SIZE 148
7104 #define WOW_MAX_PKT_OFFSET 128
7105 #define WOW_HDR_LEN (sizeof(struct ieee80211_hdr_3addr) + \
7106 sizeof(struct rfc1042_hdr))
7107 #define WOW_MAX_REDUCE (WOW_HDR_LEN - sizeof(struct ethhdr) - \
7108 offsetof(struct ieee80211_hdr_3addr, addr1))
7109
7110 enum wmi_tdls_state {
7111 WMI_TDLS_DISABLE,
7112 WMI_TDLS_ENABLE_PASSIVE,
7113 WMI_TDLS_ENABLE_ACTIVE,
7114 WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL,
7115 };
7116
7117 enum wmi_tdls_peer_state {
7118 WMI_TDLS_PEER_STATE_PEERING,
7119 WMI_TDLS_PEER_STATE_CONNECTED,
7120 WMI_TDLS_PEER_STATE_TEARDOWN,
7121 };
7122
7123 struct wmi_tdls_peer_update_cmd_arg {
7124 u32 vdev_id;
7125 enum wmi_tdls_peer_state peer_state;
7126 u8 addr[ETH_ALEN];
7127 };
7128
7129 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32
7130
7131 #define WMI_TDLS_PEER_SP_MASK 0x60
7132 #define WMI_TDLS_PEER_SP_LSB 5
7133
7134 enum wmi_tdls_options {
7135 WMI_TDLS_OFFCHAN_EN = BIT(0),
7136 WMI_TDLS_BUFFER_STA_EN = BIT(1),
7137 WMI_TDLS_SLEEP_STA_EN = BIT(2),
7138 };
7139
7140 enum {
7141 WMI_TDLS_PEER_QOS_AC_VO = BIT(0),
7142 WMI_TDLS_PEER_QOS_AC_VI = BIT(1),
7143 WMI_TDLS_PEER_QOS_AC_BK = BIT(2),
7144 WMI_TDLS_PEER_QOS_AC_BE = BIT(3),
7145 };
7146
7147 struct wmi_tdls_peer_capab_arg {
7148 u8 peer_uapsd_queues;
7149 u8 peer_max_sp;
7150 u32 buff_sta_support;
7151 u32 off_chan_support;
7152 u32 peer_curr_operclass;
7153 u32 self_curr_operclass;
7154 u32 peer_chan_len;
7155 u32 peer_operclass_len;
7156 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
7157 u32 is_peer_responder;
7158 u32 pref_offchan_num;
7159 u32 pref_offchan_bw;
7160 };
7161
7162 struct wmi_10_4_tdls_set_state_cmd {
7163 __le32 vdev_id;
7164 __le32 state;
7165 __le32 notification_interval_ms;
7166 __le32 tx_discovery_threshold;
7167 __le32 tx_teardown_threshold;
7168 __le32 rssi_teardown_threshold;
7169 __le32 rssi_delta;
7170 __le32 tdls_options;
7171 __le32 tdls_peer_traffic_ind_window;
7172 __le32 tdls_peer_traffic_response_timeout_ms;
7173 __le32 tdls_puapsd_mask;
7174 __le32 tdls_puapsd_inactivity_time_ms;
7175 __le32 tdls_puapsd_rx_frame_threshold;
7176 __le32 teardown_notification_ms;
7177 __le32 tdls_peer_kickout_threshold;
7178 } __packed;
7179
7180 struct wmi_tdls_peer_capabilities {
7181 __le32 peer_qos;
7182 __le32 buff_sta_support;
7183 __le32 off_chan_support;
7184 __le32 peer_curr_operclass;
7185 __le32 self_curr_operclass;
7186 __le32 peer_chan_len;
7187 __le32 peer_operclass_len;
7188 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
7189 __le32 is_peer_responder;
7190 __le32 pref_offchan_num;
7191 __le32 pref_offchan_bw;
7192 struct wmi_channel peer_chan_list[1];
7193 } __packed;
7194
7195 struct wmi_10_4_tdls_peer_update_cmd {
7196 __le32 vdev_id;
7197 struct wmi_mac_addr peer_macaddr;
7198 __le32 peer_state;
7199 __le32 reserved[4];
7200 struct wmi_tdls_peer_capabilities peer_capab;
7201 } __packed;
7202
7203 enum wmi_tdls_peer_reason {
7204 WMI_TDLS_TEARDOWN_REASON_TX,
7205 WMI_TDLS_TEARDOWN_REASON_RSSI,
7206 WMI_TDLS_TEARDOWN_REASON_SCAN,
7207 WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE,
7208 WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT,
7209 WMI_TDLS_TEARDOWN_REASON_BAD_PTR,
7210 WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE,
7211 WMI_TDLS_ENTER_BUF_STA,
7212 WMI_TDLS_EXIT_BUF_STA,
7213 WMI_TDLS_ENTER_BT_BUSY_MODE,
7214 WMI_TDLS_EXIT_BT_BUSY_MODE,
7215 WMI_TDLS_SCAN_STARTED_EVENT,
7216 WMI_TDLS_SCAN_COMPLETED_EVENT,
7217 };
7218
7219 enum wmi_tdls_peer_notification {
7220 WMI_TDLS_SHOULD_DISCOVER,
7221 WMI_TDLS_SHOULD_TEARDOWN,
7222 WMI_TDLS_PEER_DISCONNECTED,
7223 WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION,
7224 };
7225
7226 struct wmi_tdls_peer_event {
7227 struct wmi_mac_addr peer_macaddr;
7228 /* see enum wmi_tdls_peer_notification*/
7229 __le32 peer_status;
7230 /* see enum wmi_tdls_peer_reason */
7231 __le32 peer_reason;
7232 __le32 vdev_id;
7233 } __packed;
7234
7235 enum wmi_tid_aggr_control_conf {
7236 WMI_TID_CONFIG_AGGR_CONTROL_IGNORE,
7237 WMI_TID_CONFIG_AGGR_CONTROL_ENABLE,
7238 WMI_TID_CONFIG_AGGR_CONTROL_DISABLE,
7239 };
7240
7241 enum wmi_noack_tid_conf {
7242 WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY,
7243 WMI_PEER_TID_CONFIG_ACK,
7244 WMI_PEER_TID_CONFIG_NOACK,
7245 };
7246
7247 enum wmi_tid_rate_ctrl_conf {
7248 WMI_TID_CONFIG_RATE_CONTROL_IGNORE,
7249 WMI_TID_CONFIG_RATE_CONTROL_AUTO,
7250 WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
7251 WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
7252 WMI_PEER_TID_CONFIG_RATE_UPPER_CAP,
7253 };
7254
7255 enum wmi_tid_rtscts_control_conf {
7256 WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE,
7257 WMI_TID_CONFIG_RTSCTS_CONTROL_DISABLE,
7258 };
7259
7260 enum wmi_ext_tid_config_map {
7261 WMI_EXT_TID_RTS_CTS_CONFIG = BIT(0),
7262 };
7263
7264 struct wmi_per_peer_per_tid_cfg_arg {
7265 u32 vdev_id;
7266 struct wmi_mac_addr peer_macaddr;
7267 u32 tid;
7268 enum wmi_noack_tid_conf ack_policy;
7269 enum wmi_tid_aggr_control_conf aggr_control;
7270 u8 rate_ctrl;
7271 u32 retry_count;
7272 u32 rcode_flags;
7273 u32 ext_tid_cfg_bitmap;
7274 u32 rtscts_ctrl;
7275 };
7276
7277 struct wmi_peer_per_tid_cfg_cmd {
7278 __le32 vdev_id;
7279 struct wmi_mac_addr peer_macaddr;
7280 __le32 tid;
7281
7282 /* see enum wmi_noack_tid_conf */
7283 __le32 ack_policy;
7284
7285 /* see enum wmi_tid_aggr_control_conf */
7286 __le32 aggr_control;
7287
7288 /* see enum wmi_tid_rate_ctrl_conf */
7289 __le32 rate_control;
7290 __le32 rcode_flags;
7291 __le32 retry_count;
7292
7293 /* See enum wmi_ext_tid_config_map */
7294 __le32 ext_tid_cfg_bitmap;
7295
7296 /* see enum wmi_tid_rtscts_control_conf */
7297 __le32 rtscts_ctrl;
7298 } __packed;
7299
7300 enum wmi_txbf_conf {
7301 WMI_TXBF_CONF_UNSUPPORTED,
7302 WMI_TXBF_CONF_BEFORE_ASSOC,
7303 WMI_TXBF_CONF_AFTER_ASSOC,
7304 };
7305
7306 #define WMI_CCA_DETECT_LEVEL_AUTO 0
7307 #define WMI_CCA_DETECT_MARGIN_AUTO 0
7308
7309 struct wmi_pdev_set_adaptive_cca_params {
7310 __le32 enable;
7311 __le32 cca_detect_level;
7312 __le32 cca_detect_margin;
7313 } __packed;
7314
7315 #define WMI_PNO_MAX_SCHED_SCAN_PLANS 2
7316 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT 7200
7317 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100
7318 #define WMI_PNO_MAX_NETW_CHANNELS 26
7319 #define WMI_PNO_MAX_NETW_CHANNELS_EX 60
7320 #define WMI_PNO_MAX_SUPP_NETWORKS WLAN_SCAN_PARAMS_MAX_SSID
7321 #define WMI_PNO_MAX_IE_LENGTH WLAN_SCAN_PARAMS_MAX_IE_LEN
7322
7323 /*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/
7324 #define WMI_PNO_MAX_PB_REQ_SIZE 450
7325
7326 #define WMI_PNO_24G_DEFAULT_CH 1
7327 #define WMI_PNO_5G_DEFAULT_CH 36
7328
7329 #define WMI_ACTIVE_MAX_CHANNEL_TIME 40
7330 #define WMI_PASSIVE_MAX_CHANNEL_TIME 110
7331
7332 /* SSID broadcast type */
7333 enum wmi_SSID_bcast_type {
7334 BCAST_UNKNOWN = 0,
7335 BCAST_NORMAL = 1,
7336 BCAST_HIDDEN = 2,
7337 };
7338
7339 struct wmi_network_type {
7340 struct wmi_ssid ssid;
7341 u32 authentication;
7342 u32 encryption;
7343 u32 bcast_nw_type;
7344 u8 channel_count;
7345 u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX];
7346 s32 rssi_threshold;
7347 } __packed;
7348
7349 struct wmi_pno_scan_req {
7350 u8 enable;
7351 u8 vdev_id;
7352 u8 uc_networks_count;
7353 struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS];
7354 u32 fast_scan_period;
7355 u32 slow_scan_period;
7356 u8 fast_scan_max_cycles;
7357
7358 bool do_passive_scan;
7359
7360 u32 delay_start_time;
7361 u32 active_min_time;
7362 u32 active_max_time;
7363 u32 passive_min_time;
7364 u32 passive_max_time;
7365
7366 /* mac address randomization attributes */
7367 u32 enable_pno_scan_randomization;
7368 u8 mac_addr[ETH_ALEN];
7369 u8 mac_addr_mask[ETH_ALEN];
7370 } __packed;
7371
7372 enum wmi_host_platform_type {
7373 WMI_HOST_PLATFORM_HIGH_PERF,
7374 WMI_HOST_PLATFORM_LOW_PERF,
7375 };
7376
7377 enum wmi_bss_survey_req_type {
7378 WMI_BSS_SURVEY_REQ_TYPE_READ = 1,
7379 WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR,
7380 };
7381
7382 struct wmi_pdev_chan_info_req_cmd {
7383 __le32 type;
7384 __le32 reserved;
7385 } __packed;
7386
7387 /* bb timing register configurations */
7388 struct wmi_bb_timing_cfg_arg {
7389 /* Tx_end to pa off timing */
7390 u32 bb_tx_timing;
7391
7392 /* Tx_end to external pa off timing */
7393 u32 bb_xpa_timing;
7394 };
7395
7396 struct wmi_pdev_bb_timing_cfg_cmd {
7397 /* Tx_end to pa off timing */
7398 __le32 bb_tx_timing;
7399
7400 /* Tx_end to external pa off timing */
7401 __le32 bb_xpa_timing;
7402 } __packed;
7403
7404 struct ath10k;
7405 struct ath10k_vif;
7406 struct ath10k_fw_stats_pdev;
7407 struct ath10k_fw_stats_peer;
7408 struct ath10k_fw_stats;
7409
7410 int ath10k_wmi_attach(struct ath10k *ar);
7411 void ath10k_wmi_detach(struct ath10k *ar);
7412 void ath10k_wmi_free_host_mem(struct ath10k *ar);
7413 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar);
7414 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);
7415
7416 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
7417 int ath10k_wmi_connect(struct ath10k *ar);
7418
7419 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
7420 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
7421 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,
7422 u32 cmd_id);
7423 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg);
7424
7425 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src,
7426 struct ath10k_fw_stats_pdev *dst);
7427 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src,
7428 struct ath10k_fw_stats_pdev *dst);
7429 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,
7430 struct ath10k_fw_stats_pdev *dst);
7431 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src,
7432 struct ath10k_fw_stats_pdev *dst);
7433 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
7434 struct ath10k_fw_stats_peer *dst);
7435 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar,
7436 struct wmi_host_mem_chunks *chunks);
7437 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn,
7438 const struct wmi_start_scan_arg *arg);
7439 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params,
7440 const struct wmi_wmm_params_arg *arg);
7441 void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch,
7442 const struct wmi_channel_arg *arg);
7443 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg);
7444
7445 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb);
7446 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb);
7447 int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb);
7448 int ath10k_wmi_event_mgmt_tx_bundle_compl(struct ath10k *ar, struct sk_buff *skb);
7449 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb);
7450 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb);
7451 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb);
7452 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb);
7453 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb);
7454 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb);
7455 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb);
7456 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb);
7457 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb);
7458 void ath10k_wmi_event_dfs(struct ath10k *ar,
7459 struct wmi_phyerr_ev_arg *phyerr, u64 tsf);
7460 void ath10k_wmi_event_spectral_scan(struct ath10k *ar,
7461 struct wmi_phyerr_ev_arg *phyerr,
7462 u64 tsf);
7463 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb);
7464 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb);
7465 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb);
7466 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb);
7467 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb);
7468 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb);
7469 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar,
7470 struct sk_buff *skb);
7471 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar,
7472 struct sk_buff *skb);
7473 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb);
7474 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb);
7475 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb);
7476 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb);
7477 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb);
7478 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar,
7479 struct sk_buff *skb);
7480 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb);
7481 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb);
7482 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb);
7483 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar,
7484 struct sk_buff *skb);
7485 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb);
7486 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb);
7487 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb);
7488 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb);
7489 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb);
7490 void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb);
7491 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf,
7492 int left_len, struct wmi_phyerr_ev_arg *arg);
7493 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar,
7494 struct ath10k_fw_stats *fw_stats,
7495 char *buf);
7496 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar,
7497 struct ath10k_fw_stats *fw_stats,
7498 char *buf);
7499 size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head);
7500 size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head);
7501 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
7502 struct ath10k_fw_stats *fw_stats,
7503 char *buf);
7504 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar,
7505 enum wmi_vdev_subtype subtype);
7506 int ath10k_wmi_barrier(struct ath10k *ar);
7507 void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table,
7508 u32 num_tx_chain);
7509 void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb);
7510
7511 #endif /* _WMI_H_ */
Ubuntu Hirsute Linux kernel mirror