2 * Copyright (c) 2004 Video54 Technologies, Inc.
3 * Copyright (c) 2004-2009 Atheros Communications, Inc.
5 * Permission to use, copy, modify, and/or distribute this software for any
6 * purpose with or without fee is hereby granted, provided that the above
7 * copyright notice and this permission notice appear in all copies.
9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18 #include <linux/slab.h>
22 static const struct ath_rate_table ar5416_11na_ratetable
= {
26 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 6000, /* 6 Mb */
27 5400, 0, 12, 0, 0, 0, 0, 0 },
28 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 9000, /* 9 Mb */
29 7800, 1, 18, 0, 1, 1, 1, 1 },
30 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 12000, /* 12 Mb */
31 10000, 2, 24, 2, 2, 2, 2, 2 },
32 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 18000, /* 18 Mb */
33 13900, 3, 36, 2, 3, 3, 3, 3 },
34 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 24000, /* 24 Mb */
35 17300, 4, 48, 4, 4, 4, 4, 4 },
36 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 36000, /* 36 Mb */
37 23000, 5, 72, 4, 5, 5, 5, 5 },
38 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 48000, /* 48 Mb */
39 27400, 6, 96, 4, 6, 6, 6, 6 },
40 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 54000, /* 54 Mb */
41 29300, 7, 108, 4, 7, 7, 7, 7 },
42 { VALID_2040
, VALID_2040
, WLAN_RC_PHY_HT_20_SS
, 6500, /* 6.5 Mb */
43 6400, 0, 0, 0, 8, 24, 8, 24 },
44 { VALID_20
, VALID_20
, WLAN_RC_PHY_HT_20_SS
, 13000, /* 13 Mb */
45 12700, 1, 1, 2, 9, 25, 9, 25 },
46 { VALID_20
, VALID_20
, WLAN_RC_PHY_HT_20_SS
, 19500, /* 19.5 Mb */
47 18800, 2, 2, 2, 10, 26, 10, 26 },
48 { VALID_20
, VALID_20
, WLAN_RC_PHY_HT_20_SS
, 26000, /* 26 Mb */
49 25000, 3, 3, 4, 11, 27, 11, 27 },
50 { VALID_20
, VALID_20
, WLAN_RC_PHY_HT_20_SS
, 39000, /* 39 Mb */
51 36700, 4, 4, 4, 12, 28, 12, 28 },
52 { INVALID
, VALID_20
, WLAN_RC_PHY_HT_20_SS
, 52000, /* 52 Mb */
53 48100, 5, 5, 4, 13, 29, 13, 29 },
54 { INVALID
, VALID_20
, WLAN_RC_PHY_HT_20_SS
, 58500, /* 58.5 Mb */
55 53500, 6, 6, 4, 14, 30, 14, 30 },
56 { INVALID
, VALID_20
, WLAN_RC_PHY_HT_20_SS
, 65000, /* 65 Mb */
57 59000, 7, 7, 4, 15, 31, 15, 32 },
58 { INVALID
, INVALID
, WLAN_RC_PHY_HT_20_DS
, 13000, /* 13 Mb */
59 12700, 8, 8, 3, 16, 33, 16, 33 },
60 { INVALID
, INVALID
, WLAN_RC_PHY_HT_20_DS
, 26000, /* 26 Mb */
61 24800, 9, 9, 2, 17, 34, 17, 34 },
62 { INVALID
, INVALID
, WLAN_RC_PHY_HT_20_DS
, 39000, /* 39 Mb */
63 36600, 10, 10, 2, 18, 35, 18, 35 },
64 { VALID_20
, INVALID
, WLAN_RC_PHY_HT_20_DS
, 52000, /* 52 Mb */
65 48100, 11, 11, 4, 19, 36, 19, 36 },
66 { VALID_20
, INVALID
, WLAN_RC_PHY_HT_20_DS
, 78000, /* 78 Mb */
67 69500, 12, 12, 4, 20, 37, 20, 37 },
68 { VALID_20
, INVALID
, WLAN_RC_PHY_HT_20_DS
, 104000, /* 104 Mb */
69 89500, 13, 13, 4, 21, 38, 21, 38 },
70 { VALID_20
, INVALID
, WLAN_RC_PHY_HT_20_DS
, 117000, /* 117 Mb */
71 98900, 14, 14, 4, 22, 39, 22, 39 },
72 { VALID_20
, INVALID
, WLAN_RC_PHY_HT_20_DS
, 130000, /* 130 Mb */
73 108300, 15, 15, 4, 23, 40, 23, 41 },
74 { VALID_40
, VALID_40
, WLAN_RC_PHY_HT_40_SS
, 13500, /* 13.5 Mb */
75 13200, 0, 0, 0, 8, 24, 24, 24 },
76 { VALID_40
, VALID_40
, WLAN_RC_PHY_HT_40_SS
, 27500, /* 27.0 Mb */
77 25900, 1, 1, 2, 9, 25, 25, 25 },
78 { VALID_40
, VALID_40
, WLAN_RC_PHY_HT_40_SS
, 40500, /* 40.5 Mb */
79 38600, 2, 2, 2, 10, 26, 26, 26 },
80 { VALID_40
, VALID_40
, WLAN_RC_PHY_HT_40_SS
, 54000, /* 54 Mb */
81 49800, 3, 3, 4, 11, 27, 27, 27 },
82 { VALID_40
, VALID_40
, WLAN_RC_PHY_HT_40_SS
, 81500, /* 81 Mb */
83 72200, 4, 4, 4, 12, 28, 28, 28 },
84 { INVALID
, VALID_40
, WLAN_RC_PHY_HT_40_SS
, 108000, /* 108 Mb */
85 92900, 5, 5, 4, 13, 29, 29, 29 },
86 { INVALID
, VALID_40
, WLAN_RC_PHY_HT_40_SS
, 121500, /* 121.5 Mb */
87 102700, 6, 6, 4, 14, 30, 30, 30 },
88 { INVALID
, VALID_40
, WLAN_RC_PHY_HT_40_SS
, 135000, /* 135 Mb */
89 112000, 7, 7, 4, 15, 31, 32, 32 },
90 { INVALID
, VALID_40
, WLAN_RC_PHY_HT_40_SS_HGI
, 150000, /* 150 Mb */
91 122000, 7, 7, 4, 15, 31, 32, 32 },
92 { INVALID
, INVALID
, WLAN_RC_PHY_HT_40_DS
, 27000, /* 27 Mb */
93 25800, 8, 8, 0, 16, 33, 33, 33 },
94 { INVALID
, INVALID
, WLAN_RC_PHY_HT_40_DS
, 54000, /* 54 Mb */
95 49800, 9, 9, 2, 17, 34, 34, 34 },
96 { INVALID
, INVALID
, WLAN_RC_PHY_HT_40_DS
, 81000, /* 81 Mb */
97 71900, 10, 10, 2, 18, 35, 35, 35 },
98 { VALID_40
, INVALID
, WLAN_RC_PHY_HT_40_DS
, 108000, /* 108 Mb */
99 92500, 11, 11, 4, 19, 36, 36, 36 },
100 { VALID_40
, INVALID
, WLAN_RC_PHY_HT_40_DS
, 162000, /* 162 Mb */
101 130300, 12, 12, 4, 20, 37, 37, 37 },
102 { VALID_40
, INVALID
, WLAN_RC_PHY_HT_40_DS
, 216000, /* 216 Mb */
103 162800, 13, 13, 4, 21, 38, 38, 38 },
104 { VALID_40
, INVALID
, WLAN_RC_PHY_HT_40_DS
, 243000, /* 243 Mb */
105 178200, 14, 14, 4, 22, 39, 39, 39 },
106 { VALID_40
, INVALID
, WLAN_RC_PHY_HT_40_DS
, 270000, /* 270 Mb */
107 192100, 15, 15, 4, 23, 40, 41, 41 },
108 { VALID_40
, INVALID
, WLAN_RC_PHY_HT_40_DS_HGI
, 300000, /* 300 Mb */
109 207000, 15, 15, 4, 23, 40, 41, 41 },
111 50, /* probe interval */
112 WLAN_RC_HT_FLAG
, /* Phy rates allowed initially */
115 /* 4ms frame limit not used for NG mode. The values filled
116 * for HT are the 64K max aggregate limit */
118 static const struct ath_rate_table ar5416_11ng_ratetable
= {
122 { VALID_ALL
, VALID_ALL
, WLAN_RC_PHY_CCK
, 1000, /* 1 Mb */
123 900, 0, 2, 0, 0, 0, 0, 0 },
124 { VALID_ALL
, VALID_ALL
, WLAN_RC_PHY_CCK
, 2000, /* 2 Mb */
125 1900, 1, 4, 1, 1, 1, 1, 1 },
126 { VALID_ALL
, VALID_ALL
, WLAN_RC_PHY_CCK
, 5500, /* 5.5 Mb */
127 4900, 2, 11, 2, 2, 2, 2, 2 },
128 { VALID_ALL
, VALID_ALL
, WLAN_RC_PHY_CCK
, 11000, /* 11 Mb */
129 8100, 3, 22, 3, 3, 3, 3, 3 },
130 { INVALID
, INVALID
, WLAN_RC_PHY_OFDM
, 6000, /* 6 Mb */
131 5400, 4, 12, 4, 4, 4, 4, 4 },
132 { INVALID
, INVALID
, WLAN_RC_PHY_OFDM
, 9000, /* 9 Mb */
133 7800, 5, 18, 4, 5, 5, 5, 5 },
134 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 12000, /* 12 Mb */
135 10100, 6, 24, 6, 6, 6, 6, 6 },
136 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 18000, /* 18 Mb */
137 14100, 7, 36, 6, 7, 7, 7, 7 },
138 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 24000, /* 24 Mb */
139 17700, 8, 48, 8, 8, 8, 8, 8 },
140 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 36000, /* 36 Mb */
141 23700, 9, 72, 8, 9, 9, 9, 9 },
142 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 48000, /* 48 Mb */
143 27400, 10, 96, 8, 10, 10, 10, 10 },
144 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 54000, /* 54 Mb */
145 30900, 11, 108, 8, 11, 11, 11, 11 },
146 { INVALID
, INVALID
, WLAN_RC_PHY_HT_20_SS
, 6500, /* 6.5 Mb */
147 6400, 0, 0, 4, 12, 28, 12, 28 },
148 { VALID_20
, VALID_20
, WLAN_RC_PHY_HT_20_SS
, 13000, /* 13 Mb */
149 12700, 1, 1, 6, 13, 29, 13, 29 },
150 { VALID_20
, VALID_20
, WLAN_RC_PHY_HT_20_SS
, 19500, /* 19.5 Mb */
151 18800, 2, 2, 6, 14, 30, 14, 30 },
152 { VALID_20
, VALID_20
, WLAN_RC_PHY_HT_20_SS
, 26000, /* 26 Mb */
153 25000, 3, 3, 8, 15, 31, 15, 31 },
154 { VALID_20
, VALID_20
, WLAN_RC_PHY_HT_20_SS
, 39000, /* 39 Mb */
155 36700, 4, 4, 8, 16, 32, 16, 32 },
156 { INVALID
, VALID_20
, WLAN_RC_PHY_HT_20_SS
, 52000, /* 52 Mb */
157 48100, 5, 5, 8, 17, 33, 17, 33 },
158 { INVALID
, VALID_20
, WLAN_RC_PHY_HT_20_SS
, 58500, /* 58.5 Mb */
159 53500, 6, 6, 8, 18, 34, 18, 34 },
160 { INVALID
, VALID_20
, WLAN_RC_PHY_HT_20_SS
, 65000, /* 65 Mb */
161 59000, 7, 7, 8, 19, 35, 19, 36 },
162 { INVALID
, INVALID
, WLAN_RC_PHY_HT_20_DS
, 13000, /* 13 Mb */
163 12700, 8, 8, 4, 20, 37, 20, 37 },
164 { INVALID
, INVALID
, WLAN_RC_PHY_HT_20_DS
, 26000, /* 26 Mb */
165 24800, 9, 9, 6, 21, 38, 21, 38 },
166 { INVALID
, INVALID
, WLAN_RC_PHY_HT_20_DS
, 39000, /* 39 Mb */
167 36600, 10, 10, 6, 22, 39, 22, 39 },
168 { VALID_20
, INVALID
, WLAN_RC_PHY_HT_20_DS
, 52000, /* 52 Mb */
169 48100, 11, 11, 8, 23, 40, 23, 40 },
170 { VALID_20
, INVALID
, WLAN_RC_PHY_HT_20_DS
, 78000, /* 78 Mb */
171 69500, 12, 12, 8, 24, 41, 24, 41 },
172 { VALID_20
, INVALID
, WLAN_RC_PHY_HT_20_DS
, 104000, /* 104 Mb */
173 89500, 13, 13, 8, 25, 42, 25, 42 },
174 { VALID_20
, INVALID
, WLAN_RC_PHY_HT_20_DS
, 117000, /* 117 Mb */
175 98900, 14, 14, 8, 26, 43, 26, 44 },
176 { VALID_20
, INVALID
, WLAN_RC_PHY_HT_20_DS
, 130000, /* 130 Mb */
177 108300, 15, 15, 8, 27, 44, 27, 45 },
178 { VALID_40
, VALID_40
, WLAN_RC_PHY_HT_40_SS
, 13500, /* 13.5 Mb */
179 13200, 0, 0, 8, 12, 28, 28, 28 },
180 { VALID_40
, VALID_40
, WLAN_RC_PHY_HT_40_SS
, 27500, /* 27.0 Mb */
181 25900, 1, 1, 8, 13, 29, 29, 29 },
182 { VALID_40
, VALID_40
, WLAN_RC_PHY_HT_40_SS
, 40500, /* 40.5 Mb */
183 38600, 2, 2, 8, 14, 30, 30, 30 },
184 { VALID_40
, VALID_40
, WLAN_RC_PHY_HT_40_SS
, 54000, /* 54 Mb */
185 49800, 3, 3, 8, 15, 31, 31, 31 },
186 { VALID_40
, VALID_40
, WLAN_RC_PHY_HT_40_SS
, 81500, /* 81 Mb */
187 72200, 4, 4, 8, 16, 32, 32, 32 },
188 { INVALID
, VALID_40
, WLAN_RC_PHY_HT_40_SS
, 108000, /* 108 Mb */
189 92900, 5, 5, 8, 17, 33, 33, 33 },
190 { INVALID
, VALID_40
, WLAN_RC_PHY_HT_40_SS
, 121500, /* 121.5 Mb */
191 102700, 6, 6, 8, 18, 34, 34, 34 },
192 { INVALID
, VALID_40
, WLAN_RC_PHY_HT_40_SS
, 135000, /* 135 Mb */
193 112000, 7, 7, 8, 19, 35, 36, 36 },
194 { INVALID
, VALID_40
, WLAN_RC_PHY_HT_40_SS_HGI
, 150000, /* 150 Mb */
195 122000, 7, 7, 8, 19, 35, 36, 36 },
196 { INVALID
, INVALID
, WLAN_RC_PHY_HT_40_DS
, 27000, /* 27 Mb */
197 25800, 8, 8, 8, 20, 37, 37, 37 },
198 { INVALID
, INVALID
, WLAN_RC_PHY_HT_40_DS
, 54000, /* 54 Mb */
199 49800, 9, 9, 8, 21, 38, 38, 38 },
200 { INVALID
, INVALID
, WLAN_RC_PHY_HT_40_DS
, 81000, /* 81 Mb */
201 71900, 10, 10, 8, 22, 39, 39, 39 },
202 { VALID_40
, INVALID
, WLAN_RC_PHY_HT_40_DS
, 108000, /* 108 Mb */
203 92500, 11, 11, 8, 23, 40, 40, 40 },
204 { VALID_40
, INVALID
, WLAN_RC_PHY_HT_40_DS
, 162000, /* 162 Mb */
205 130300, 12, 12, 8, 24, 41, 41, 41 },
206 { VALID_40
, INVALID
, WLAN_RC_PHY_HT_40_DS
, 216000, /* 216 Mb */
207 162800, 13, 13, 8, 25, 42, 42, 42 },
208 { VALID_40
, INVALID
, WLAN_RC_PHY_HT_40_DS
, 243000, /* 243 Mb */
209 178200, 14, 14, 8, 26, 43, 43, 43 },
210 { VALID_40
, INVALID
, WLAN_RC_PHY_HT_40_DS
, 270000, /* 270 Mb */
211 192100, 15, 15, 8, 27, 44, 45, 45 },
212 { VALID_40
, INVALID
, WLAN_RC_PHY_HT_40_DS_HGI
, 300000, /* 300 Mb */
213 207000, 15, 15, 8, 27, 44, 45, 45 },
215 50, /* probe interval */
216 WLAN_RC_HT_FLAG
, /* Phy rates allowed initially */
219 static const struct ath_rate_table ar5416_11a_ratetable
= {
223 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 6000, /* 6 Mb */
224 5400, 0, 12, 0, 0, 0 },
225 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 9000, /* 9 Mb */
226 7800, 1, 18, 0, 1, 0 },
227 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 12000, /* 12 Mb */
228 10000, 2, 24, 2, 2, 0 },
229 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 18000, /* 18 Mb */
230 13900, 3, 36, 2, 3, 0 },
231 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 24000, /* 24 Mb */
232 17300, 4, 48, 4, 4, 0 },
233 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 36000, /* 36 Mb */
234 23000, 5, 72, 4, 5, 0 },
235 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 48000, /* 48 Mb */
236 27400, 6, 96, 4, 6, 0 },
237 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 54000, /* 54 Mb */
238 29300, 7, 108, 4, 7, 0 },
240 50, /* probe interval */
241 0, /* Phy rates allowed initially */
244 static const struct ath_rate_table ar5416_11g_ratetable
= {
248 { VALID
, VALID
, WLAN_RC_PHY_CCK
, 1000, /* 1 Mb */
249 900, 0, 2, 0, 0, 0 },
250 { VALID
, VALID
, WLAN_RC_PHY_CCK
, 2000, /* 2 Mb */
251 1900, 1, 4, 1, 1, 0 },
252 { VALID
, VALID
, WLAN_RC_PHY_CCK
, 5500, /* 5.5 Mb */
253 4900, 2, 11, 2, 2, 0 },
254 { VALID
, VALID
, WLAN_RC_PHY_CCK
, 11000, /* 11 Mb */
255 8100, 3, 22, 3, 3, 0 },
256 { INVALID
, INVALID
, WLAN_RC_PHY_OFDM
, 6000, /* 6 Mb */
257 5400, 4, 12, 4, 4, 0 },
258 { INVALID
, INVALID
, WLAN_RC_PHY_OFDM
, 9000, /* 9 Mb */
259 7800, 5, 18, 4, 5, 0 },
260 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 12000, /* 12 Mb */
261 10000, 6, 24, 6, 6, 0 },
262 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 18000, /* 18 Mb */
263 13900, 7, 36, 6, 7, 0 },
264 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 24000, /* 24 Mb */
265 17300, 8, 48, 8, 8, 0 },
266 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 36000, /* 36 Mb */
267 23000, 9, 72, 8, 9, 0 },
268 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 48000, /* 48 Mb */
269 27400, 10, 96, 8, 10, 0 },
270 { VALID
, VALID
, WLAN_RC_PHY_OFDM
, 54000, /* 54 Mb */
271 29300, 11, 108, 8, 11, 0 },
273 50, /* probe interval */
274 0, /* Phy rates allowed initially */
277 static const struct ath_rate_table
*hw_rate_table
[ATH9K_MODE_MAX
] = {
278 [ATH9K_MODE_11A
] = &ar5416_11a_ratetable
,
279 [ATH9K_MODE_11G
] = &ar5416_11g_ratetable
,
280 [ATH9K_MODE_11NA_HT20
] = &ar5416_11na_ratetable
,
281 [ATH9K_MODE_11NG_HT20
] = &ar5416_11ng_ratetable
,
282 [ATH9K_MODE_11NA_HT40PLUS
] = &ar5416_11na_ratetable
,
283 [ATH9K_MODE_11NA_HT40MINUS
] = &ar5416_11na_ratetable
,
284 [ATH9K_MODE_11NG_HT40PLUS
] = &ar5416_11ng_ratetable
,
285 [ATH9K_MODE_11NG_HT40MINUS
] = &ar5416_11ng_ratetable
,
288 static int ath_rc_get_rateindex(const struct ath_rate_table
*rate_table
,
289 struct ieee80211_tx_rate
*rate
);
291 static inline int8_t median(int8_t a
, int8_t b
, int8_t c
)
310 static void ath_rc_sort_validrates(const struct ath_rate_table
*rate_table
,
311 struct ath_rate_priv
*ath_rc_priv
)
313 u8 i
, j
, idx
, idx_next
;
315 for (i
= ath_rc_priv
->max_valid_rate
- 1; i
> 0; i
--) {
316 for (j
= 0; j
<= i
-1; j
++) {
317 idx
= ath_rc_priv
->valid_rate_index
[j
];
318 idx_next
= ath_rc_priv
->valid_rate_index
[j
+1];
320 if (rate_table
->info
[idx
].ratekbps
>
321 rate_table
->info
[idx_next
].ratekbps
) {
322 ath_rc_priv
->valid_rate_index
[j
] = idx_next
;
323 ath_rc_priv
->valid_rate_index
[j
+1] = idx
;
329 static void ath_rc_init_valid_txmask(struct ath_rate_priv
*ath_rc_priv
)
333 for (i
= 0; i
< ath_rc_priv
->rate_table_size
; i
++)
334 ath_rc_priv
->valid_rate_index
[i
] = 0;
337 static inline void ath_rc_set_valid_txmask(struct ath_rate_priv
*ath_rc_priv
,
338 u8 index
, int valid_tx_rate
)
340 BUG_ON(index
> ath_rc_priv
->rate_table_size
);
341 ath_rc_priv
->valid_rate_index
[index
] = valid_tx_rate
? 1 : 0;
345 int ath_rc_get_nextvalid_txrate(const struct ath_rate_table
*rate_table
,
346 struct ath_rate_priv
*ath_rc_priv
,
352 for (i
= 0; i
< ath_rc_priv
->max_valid_rate
- 1; i
++) {
353 if (ath_rc_priv
->valid_rate_index
[i
] == cur_valid_txrate
) {
354 *next_idx
= ath_rc_priv
->valid_rate_index
[i
+1];
359 /* No more valid rates */
365 /* Return true only for single stream */
367 static int ath_rc_valid_phyrate(u32 phy
, u32 capflag
, int ignore_cw
)
369 if (WLAN_RC_PHY_HT(phy
) && !(capflag
& WLAN_RC_HT_FLAG
))
371 if (WLAN_RC_PHY_DS(phy
) && !(capflag
& WLAN_RC_DS_FLAG
))
373 if (WLAN_RC_PHY_SGI(phy
) && !(capflag
& WLAN_RC_SGI_FLAG
))
375 if (!ignore_cw
&& WLAN_RC_PHY_HT(phy
))
376 if (WLAN_RC_PHY_40(phy
) && !(capflag
& WLAN_RC_40_FLAG
))
382 ath_rc_get_lower_rix(const struct ath_rate_table
*rate_table
,
383 struct ath_rate_priv
*ath_rc_priv
,
384 u8 cur_valid_txrate
, u8
*next_idx
)
388 for (i
= 1; i
< ath_rc_priv
->max_valid_rate
; i
++) {
389 if (ath_rc_priv
->valid_rate_index
[i
] == cur_valid_txrate
) {
390 *next_idx
= ath_rc_priv
->valid_rate_index
[i
-1];
398 static u8
ath_rc_init_validrates(struct ath_rate_priv
*ath_rc_priv
,
399 const struct ath_rate_table
*rate_table
,
405 for (i
= 0; i
< rate_table
->rate_cnt
; i
++) {
406 valid
= (!(ath_rc_priv
->ht_cap
& WLAN_RC_DS_FLAG
) ?
407 rate_table
->info
[i
].valid_single_stream
:
408 rate_table
->info
[i
].valid
);
410 u32 phy
= rate_table
->info
[i
].phy
;
411 u8 valid_rate_count
= 0;
413 if (!ath_rc_valid_phyrate(phy
, capflag
, 0))
416 valid_rate_count
= ath_rc_priv
->valid_phy_ratecnt
[phy
];
418 ath_rc_priv
->valid_phy_rateidx
[phy
][valid_rate_count
] = i
;
419 ath_rc_priv
->valid_phy_ratecnt
[phy
] += 1;
420 ath_rc_set_valid_txmask(ath_rc_priv
, i
, 1);
428 static u8
ath_rc_setvalid_rates(struct ath_rate_priv
*ath_rc_priv
,
429 const struct ath_rate_table
*rate_table
,
430 struct ath_rateset
*rateset
,
435 /* Use intersection of working rates and valid rates */
436 for (i
= 0; i
< rateset
->rs_nrates
; i
++) {
437 for (j
= 0; j
< rate_table
->rate_cnt
; j
++) {
438 u32 phy
= rate_table
->info
[j
].phy
;
439 u32 valid
= (!(ath_rc_priv
->ht_cap
& WLAN_RC_DS_FLAG
) ?
440 rate_table
->info
[j
].valid_single_stream
:
441 rate_table
->info
[j
].valid
);
442 u8 rate
= rateset
->rs_rates
[i
];
443 u8 dot11rate
= rate_table
->info
[j
].dot11rate
;
445 /* We allow a rate only if its valid and the
446 * capflag matches one of the validity
447 * (VALID/VALID_20/VALID_40) flags */
449 if ((rate
== dot11rate
) &&
450 ((valid
& WLAN_RC_CAP_MODE(capflag
)) ==
451 WLAN_RC_CAP_MODE(capflag
)) &&
452 !WLAN_RC_PHY_HT(phy
)) {
453 u8 valid_rate_count
= 0;
455 if (!ath_rc_valid_phyrate(phy
, capflag
, 0))
459 ath_rc_priv
->valid_phy_ratecnt
[phy
];
461 ath_rc_priv
->valid_phy_rateidx
[phy
]
462 [valid_rate_count
] = j
;
463 ath_rc_priv
->valid_phy_ratecnt
[phy
] += 1;
464 ath_rc_set_valid_txmask(ath_rc_priv
, j
, 1);
473 static u8
ath_rc_setvalid_htrates(struct ath_rate_priv
*ath_rc_priv
,
474 const struct ath_rate_table
*rate_table
,
475 u8
*mcs_set
, u32 capflag
)
477 struct ath_rateset
*rateset
= (struct ath_rateset
*)mcs_set
;
481 /* Use intersection of working rates and valid rates */
482 for (i
= 0; i
< rateset
->rs_nrates
; i
++) {
483 for (j
= 0; j
< rate_table
->rate_cnt
; j
++) {
484 u32 phy
= rate_table
->info
[j
].phy
;
485 u32 valid
= (!(ath_rc_priv
->ht_cap
& WLAN_RC_DS_FLAG
) ?
486 rate_table
->info
[j
].valid_single_stream
:
487 rate_table
->info
[j
].valid
);
488 u8 rate
= rateset
->rs_rates
[i
];
489 u8 dot11rate
= rate_table
->info
[j
].dot11rate
;
491 if ((rate
!= dot11rate
) || !WLAN_RC_PHY_HT(phy
) ||
492 !WLAN_RC_PHY_HT_VALID(valid
, capflag
))
495 if (!ath_rc_valid_phyrate(phy
, capflag
, 0))
498 ath_rc_priv
->valid_phy_rateidx
[phy
]
499 [ath_rc_priv
->valid_phy_ratecnt
[phy
]] = j
;
500 ath_rc_priv
->valid_phy_ratecnt
[phy
] += 1;
501 ath_rc_set_valid_txmask(ath_rc_priv
, j
, 1);
509 /* Finds the highest rate index we can use */
510 static u8
ath_rc_get_highest_rix(struct ath_softc
*sc
,
511 struct ath_rate_priv
*ath_rc_priv
,
512 const struct ath_rate_table
*rate_table
,
515 u32 best_thruput
, this_thruput
, now_msec
;
516 u8 rate
, next_rate
, best_rate
, maxindex
, minindex
;
519 now_msec
= jiffies_to_msecs(jiffies
);
522 maxindex
= ath_rc_priv
->max_valid_rate
-1;
524 best_rate
= minindex
;
527 * Try the higher rate first. It will reduce memory moving time
528 * if we have very good channel characteristics.
530 for (index
= maxindex
; index
>= minindex
; index
--) {
533 rate
= ath_rc_priv
->valid_rate_index
[index
];
534 if (rate
> ath_rc_priv
->rate_max_phy
)
538 * For TCP the average collision rate is around 11%,
539 * so we ignore PERs less than this. This is to
540 * prevent the rate we are currently using (whose
541 * PER might be in the 10-15 range because of TCP
542 * collisions) looking worse than the next lower
543 * rate whose PER has decayed close to 0. If we
544 * used to next lower rate, its PER would grow to
545 * 10-15 and we would be worse off then staying
546 * at the current rate.
548 per_thres
= ath_rc_priv
->per
[rate
];
552 this_thruput
= rate_table
->info
[rate
].user_ratekbps
*
555 if (best_thruput
<= this_thruput
) {
556 best_thruput
= this_thruput
;
564 * Must check the actual rate (ratekbps) to account for
565 * non-monoticity of 11g's rate table
568 if (rate
>= ath_rc_priv
->rate_max_phy
) {
569 rate
= ath_rc_priv
->rate_max_phy
;
571 /* Probe the next allowed phy state */
572 if (ath_rc_get_nextvalid_txrate(rate_table
,
573 ath_rc_priv
, rate
, &next_rate
) &&
574 (now_msec
- ath_rc_priv
->probe_time
>
575 rate_table
->probe_interval
) &&
576 (ath_rc_priv
->hw_maxretry_pktcnt
>= 1)) {
578 ath_rc_priv
->probe_rate
= rate
;
579 ath_rc_priv
->probe_time
= now_msec
;
580 ath_rc_priv
->hw_maxretry_pktcnt
= 0;
585 if (rate
> (ath_rc_priv
->rate_table_size
- 1))
586 rate
= ath_rc_priv
->rate_table_size
- 1;
588 if (rate_table
->info
[rate
].valid
&&
589 (ath_rc_priv
->ht_cap
& WLAN_RC_DS_FLAG
))
592 if (rate_table
->info
[rate
].valid_single_stream
&&
593 !(ath_rc_priv
->ht_cap
& WLAN_RC_DS_FLAG
))
596 /* This should not happen */
599 rate
= ath_rc_priv
->valid_rate_index
[0];
604 static void ath_rc_rate_set_series(const struct ath_rate_table
*rate_table
,
605 struct ieee80211_tx_rate
*rate
,
606 struct ieee80211_tx_rate_control
*txrc
,
607 u8 tries
, u8 rix
, int rtsctsenable
)
610 rate
->idx
= rate_table
->info
[rix
].ratecode
;
612 if (txrc
->short_preamble
)
613 rate
->flags
|= IEEE80211_TX_RC_USE_SHORT_PREAMBLE
;
614 if (txrc
->rts
|| rtsctsenable
)
615 rate
->flags
|= IEEE80211_TX_RC_USE_RTS_CTS
;
617 if (WLAN_RC_PHY_HT(rate_table
->info
[rix
].phy
)) {
618 rate
->flags
|= IEEE80211_TX_RC_MCS
;
619 if (WLAN_RC_PHY_40(rate_table
->info
[rix
].phy
))
620 rate
->flags
|= IEEE80211_TX_RC_40_MHZ_WIDTH
;
621 if (WLAN_RC_PHY_SGI(rate_table
->info
[rix
].phy
))
622 rate
->flags
|= IEEE80211_TX_RC_SHORT_GI
;
626 static void ath_rc_rate_set_rtscts(struct ath_softc
*sc
,
627 const struct ath_rate_table
*rate_table
,
628 struct ieee80211_tx_info
*tx_info
)
630 struct ieee80211_tx_rate
*rates
= tx_info
->control
.rates
;
631 int i
= 0, rix
= 0, cix
, enable_g_protection
= 0;
633 /* get the cix for the lowest valid rix */
634 for (i
= 3; i
>= 0; i
--) {
635 if (rates
[i
].count
&& (rates
[i
].idx
>= 0)) {
636 rix
= ath_rc_get_rateindex(rate_table
, &rates
[i
]);
640 cix
= rate_table
->info
[rix
].ctrl_rate
;
642 /* All protection frames are transmited at 2Mb/s for 802.11g,
643 * otherwise we transmit them at 1Mb/s */
644 if (sc
->hw
->conf
.channel
->band
== IEEE80211_BAND_2GHZ
&&
645 !conf_is_ht(&sc
->hw
->conf
))
646 enable_g_protection
= 1;
649 * If 802.11g protection is enabled, determine whether to use RTS/CTS or
650 * just CTS. Note that this is only done for OFDM/HT unicast frames.
652 if ((sc
->sc_flags
& SC_OP_PROTECT_ENABLE
) &&
653 (rate_table
->info
[rix
].phy
== WLAN_RC_PHY_OFDM
||
654 WLAN_RC_PHY_HT(rate_table
->info
[rix
].phy
))) {
655 rates
[0].flags
|= IEEE80211_TX_RC_USE_CTS_PROTECT
;
656 cix
= rate_table
->info
[enable_g_protection
].ctrl_rate
;
659 tx_info
->control
.rts_cts_rate_idx
= cix
;
662 static void ath_get_rate(void *priv
, struct ieee80211_sta
*sta
, void *priv_sta
,
663 struct ieee80211_tx_rate_control
*txrc
)
665 struct ath_softc
*sc
= priv
;
666 struct ath_rate_priv
*ath_rc_priv
= priv_sta
;
667 const struct ath_rate_table
*rate_table
;
668 struct sk_buff
*skb
= txrc
->skb
;
669 struct ieee80211_tx_info
*tx_info
= IEEE80211_SKB_CB(skb
);
670 struct ieee80211_tx_rate
*rates
= tx_info
->control
.rates
;
671 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)skb
->data
;
672 __le16 fc
= hdr
->frame_control
;
673 u8 try_per_rate
, i
= 0, rix
;
676 if (rate_control_send_low(sta
, priv_sta
, txrc
))
680 * For Multi Rate Retry we use a different number of
681 * retry attempt counts. This ends up looking like this:
691 rate_table
= sc
->cur_rate_table
;
692 rix
= ath_rc_get_highest_rix(sc
, ath_rc_priv
, rate_table
, &is_probe
);
695 /* set one try for probe rates. For the
696 * probes don't enable rts */
697 ath_rc_rate_set_series(rate_table
, &rates
[i
++], txrc
,
700 /* Get the next tried/allowed rate. No RTS for the next series
701 * after the probe rate
703 ath_rc_get_lower_rix(rate_table
, ath_rc_priv
, rix
, &rix
);
704 ath_rc_rate_set_series(rate_table
, &rates
[i
++], txrc
,
705 try_per_rate
, rix
, 0);
707 tx_info
->flags
|= IEEE80211_TX_CTL_RATE_CTRL_PROBE
;
709 /* Set the choosen rate. No RTS for first series entry. */
710 ath_rc_rate_set_series(rate_table
, &rates
[i
++], txrc
,
711 try_per_rate
, rix
, 0);
714 /* Fill in the other rates for multirate retry */
715 for ( ; i
< 4; i
++) {
716 /* Use twice the number of tries for the last MRR segment. */
720 ath_rc_get_lower_rix(rate_table
, ath_rc_priv
, rix
, &rix
);
721 /* All other rates in the series have RTS enabled */
722 ath_rc_rate_set_series(rate_table
, &rates
[i
], txrc
,
723 try_per_rate
, rix
, 1);
727 * NB:Change rate series to enable aggregation when operating
728 * at lower MCS rates. When first rate in series is MCS2
729 * in HT40 @ 2.4GHz, series should look like:
731 * {MCS2, MCS1, MCS0, MCS0}.
733 * When first rate in series is MCS3 in HT20 @ 2.4GHz, series should
736 * {MCS3, MCS2, MCS1, MCS1}
738 * So, set fourth rate in series to be same as third one for
741 if ((sc
->hw
->conf
.channel
->band
== IEEE80211_BAND_2GHZ
) &&
742 (conf_is_ht(&sc
->hw
->conf
))) {
743 u8 dot11rate
= rate_table
->info
[rix
].dot11rate
;
744 u8 phy
= rate_table
->info
[rix
].phy
;
746 ((dot11rate
== 2 && phy
== WLAN_RC_PHY_HT_40_SS
) ||
747 (dot11rate
== 3 && phy
== WLAN_RC_PHY_HT_20_SS
))) {
748 rates
[3].idx
= rates
[2].idx
;
749 rates
[3].flags
= rates
[2].flags
;
754 * Force hardware to use computed duration for next
755 * fragment by disabling multi-rate retry, which
756 * updates duration based on the multi-rate duration table.
758 * FIXME: Fix duration
760 if (ieee80211_has_morefrags(fc
) ||
761 (le16_to_cpu(hdr
->seq_ctrl
) & IEEE80211_SCTL_FRAG
)) {
762 rates
[1].count
= rates
[2].count
= rates
[3].count
= 0;
763 rates
[1].idx
= rates
[2].idx
= rates
[3].idx
= 0;
764 rates
[0].count
= ATH_TXMAXTRY
;
768 ath_rc_rate_set_rtscts(sc
, rate_table
, tx_info
);
771 static bool ath_rc_update_per(struct ath_softc
*sc
,
772 const struct ath_rate_table
*rate_table
,
773 struct ath_rate_priv
*ath_rc_priv
,
774 struct ieee80211_tx_info
*tx_info
,
775 int tx_rate
, int xretries
, int retries
,
778 bool state_change
= false;
779 int count
, n_bad_frames
;
781 static u32 nretry_to_per_lookup
[10] = {
794 last_per
= ath_rc_priv
->per
[tx_rate
];
795 n_bad_frames
= tx_info
->status
.ampdu_len
- tx_info
->status
.ampdu_ack_len
;
799 ath_rc_priv
->per
[tx_rate
] += 30;
800 if (ath_rc_priv
->per
[tx_rate
] > 100)
801 ath_rc_priv
->per
[tx_rate
] = 100;
804 count
= ARRAY_SIZE(nretry_to_per_lookup
);
805 if (retries
>= count
)
808 /* new_PER = 7/8*old_PER + 1/8*(currentPER) */
809 ath_rc_priv
->per
[tx_rate
] =
810 (u8
)(last_per
- (last_per
>> 3) + (100 >> 3));
813 /* xretries == 1 or 2 */
815 if (ath_rc_priv
->probe_rate
== tx_rate
)
816 ath_rc_priv
->probe_rate
= 0;
818 } else { /* xretries == 0 */
819 count
= ARRAY_SIZE(nretry_to_per_lookup
);
820 if (retries
>= count
)
824 /* new_PER = 7/8*old_PER + 1/8*(currentPER)
825 * Assuming that n_frames is not 0. The current PER
826 * from the retries is 100 * retries / (retries+1),
827 * since the first retries attempts failed, and the
828 * next one worked. For the one that worked,
829 * n_bad_frames subframes out of n_frames wored,
830 * so the PER for that part is
831 * 100 * n_bad_frames / n_frames, and it contributes
832 * 100 * n_bad_frames / (n_frames * (retries+1)) to
833 * the above PER. The expression below is a
834 * simplified version of the sum of these two terms.
836 if (tx_info
->status
.ampdu_len
> 0) {
837 int n_frames
, n_bad_tries
;
840 n_bad_tries
= retries
* tx_info
->status
.ampdu_len
+
842 n_frames
= tx_info
->status
.ampdu_len
* (retries
+ 1);
843 cur_per
= (100 * n_bad_tries
/ n_frames
) >> 3;
844 new_per
= (u8
)(last_per
- (last_per
>> 3) + cur_per
);
845 ath_rc_priv
->per
[tx_rate
] = new_per
;
848 ath_rc_priv
->per
[tx_rate
] =
849 (u8
)(last_per
- (last_per
>> 3) +
850 (nretry_to_per_lookup
[retries
] >> 3));
855 * If we got at most one retry then increase the max rate if
856 * this was a probe. Otherwise, ignore the probe.
858 if (ath_rc_priv
->probe_rate
&& ath_rc_priv
->probe_rate
== tx_rate
) {
859 if (retries
> 0 || 2 * n_bad_frames
> tx_info
->status
.ampdu_len
) {
861 * Since we probed with just a single attempt,
862 * any retries means the probe failed. Also,
863 * if the attempt worked, but more than half
864 * the subframes were bad then also consider
865 * the probe a failure.
867 ath_rc_priv
->probe_rate
= 0;
871 ath_rc_priv
->rate_max_phy
=
872 ath_rc_priv
->probe_rate
;
873 probe_rate
= ath_rc_priv
->probe_rate
;
875 if (ath_rc_priv
->per
[probe_rate
] > 30)
876 ath_rc_priv
->per
[probe_rate
] = 20;
878 ath_rc_priv
->probe_rate
= 0;
881 * Since this probe succeeded, we allow the next
882 * probe twice as soon. This allows the maxRate
883 * to move up faster if the probes are
886 ath_rc_priv
->probe_time
=
887 now_msec
- rate_table
->probe_interval
/ 2;
893 * Don't update anything. We don't know if
894 * this was because of collisions or poor signal.
896 ath_rc_priv
->hw_maxretry_pktcnt
= 0;
899 * It worked with no retries. First ignore bogus (small)
902 if (tx_rate
== ath_rc_priv
->rate_max_phy
&&
903 ath_rc_priv
->hw_maxretry_pktcnt
< 255) {
904 ath_rc_priv
->hw_maxretry_pktcnt
++;
913 /* Update PER, RSSI and whatever else that the code thinks it is doing.
914 If you can make sense of all this, you really need to go out more. */
916 static void ath_rc_update_ht(struct ath_softc
*sc
,
917 struct ath_rate_priv
*ath_rc_priv
,
918 struct ieee80211_tx_info
*tx_info
,
919 int tx_rate
, int xretries
, int retries
)
921 u32 now_msec
= jiffies_to_msecs(jiffies
);
924 bool state_change
= false;
925 const struct ath_rate_table
*rate_table
= sc
->cur_rate_table
;
926 int size
= ath_rc_priv
->rate_table_size
;
928 if ((tx_rate
< 0) || (tx_rate
> rate_table
->rate_cnt
))
931 last_per
= ath_rc_priv
->per
[tx_rate
];
933 /* Update PER first */
934 state_change
= ath_rc_update_per(sc
, rate_table
, ath_rc_priv
,
935 tx_info
, tx_rate
, xretries
,
939 * If this rate looks bad (high PER) then stop using it for
940 * a while (except if we are probing).
942 if (ath_rc_priv
->per
[tx_rate
] >= 55 && tx_rate
> 0 &&
943 rate_table
->info
[tx_rate
].ratekbps
<=
944 rate_table
->info
[ath_rc_priv
->rate_max_phy
].ratekbps
) {
945 ath_rc_get_lower_rix(rate_table
, ath_rc_priv
,
946 (u8
)tx_rate
, &ath_rc_priv
->rate_max_phy
);
948 /* Don't probe for a little while. */
949 ath_rc_priv
->probe_time
= now_msec
;
952 /* Make sure the rates below this have lower PER */
953 /* Monotonicity is kept only for rates below the current rate. */
954 if (ath_rc_priv
->per
[tx_rate
] < last_per
) {
955 for (rate
= tx_rate
- 1; rate
>= 0; rate
--) {
957 if (ath_rc_priv
->per
[rate
] >
958 ath_rc_priv
->per
[rate
+1]) {
959 ath_rc_priv
->per
[rate
] =
960 ath_rc_priv
->per
[rate
+1];
965 /* Maintain monotonicity for rates above the current rate */
966 for (rate
= tx_rate
; rate
< size
- 1; rate
++) {
967 if (ath_rc_priv
->per
[rate
+1] <
968 ath_rc_priv
->per
[rate
])
969 ath_rc_priv
->per
[rate
+1] =
970 ath_rc_priv
->per
[rate
];
973 /* Every so often, we reduce the thresholds
974 * and PER (different for CCK and OFDM). */
975 if (now_msec
- ath_rc_priv
->per_down_time
>=
976 rate_table
->probe_interval
) {
977 for (rate
= 0; rate
< size
; rate
++) {
978 ath_rc_priv
->per
[rate
] =
979 7 * ath_rc_priv
->per
[rate
] / 8;
982 ath_rc_priv
->per_down_time
= now_msec
;
985 ath_debug_stat_retries(sc
, tx_rate
, xretries
, retries
,
986 ath_rc_priv
->per
[tx_rate
]);
990 static int ath_rc_get_rateindex(const struct ath_rate_table
*rate_table
,
991 struct ieee80211_tx_rate
*rate
)
995 if (!(rate
->flags
& IEEE80211_TX_RC_MCS
))
998 rix
= rate
->idx
+ rate_table
->mcs_start
;
999 if ((rate
->flags
& IEEE80211_TX_RC_40_MHZ_WIDTH
) &&
1000 (rate
->flags
& IEEE80211_TX_RC_SHORT_GI
))
1001 rix
= rate_table
->info
[rix
].ht_index
;
1002 else if (rate
->flags
& IEEE80211_TX_RC_SHORT_GI
)
1003 rix
= rate_table
->info
[rix
].sgi_index
;
1004 else if (rate
->flags
& IEEE80211_TX_RC_40_MHZ_WIDTH
)
1005 rix
= rate_table
->info
[rix
].cw40index
;
1007 rix
= rate_table
->info
[rix
].base_index
;
1012 static void ath_rc_tx_status(struct ath_softc
*sc
,
1013 struct ath_rate_priv
*ath_rc_priv
,
1014 struct ieee80211_tx_info
*tx_info
,
1015 int final_ts_idx
, int xretries
, int long_retry
)
1017 const struct ath_rate_table
*rate_table
;
1018 struct ieee80211_tx_rate
*rates
= tx_info
->status
.rates
;
1022 rate_table
= sc
->cur_rate_table
;
1025 * If the first rate is not the final index, there
1026 * are intermediate rate failures to be processed.
1028 if (final_ts_idx
!= 0) {
1029 /* Process intermediate rates that failed.*/
1030 for (i
= 0; i
< final_ts_idx
; i
++) {
1031 if (rates
[i
].count
!= 0 && (rates
[i
].idx
>= 0)) {
1032 flags
= rates
[i
].flags
;
1034 /* If HT40 and we have switched mode from
1035 * 40 to 20 => don't update */
1037 if ((flags
& IEEE80211_TX_RC_40_MHZ_WIDTH
) &&
1038 !(ath_rc_priv
->ht_cap
& WLAN_RC_40_FLAG
))
1041 rix
= ath_rc_get_rateindex(rate_table
, &rates
[i
]);
1042 ath_rc_update_ht(sc
, ath_rc_priv
, tx_info
,
1043 rix
, xretries
? 1 : 2,
1049 * Handle the special case of MIMO PS burst, where the second
1050 * aggregate is sent out with only one rate and one try.
1051 * Treating it as an excessive retry penalizes the rate
1054 if (rates
[0].count
== 1 && xretries
== 1)
1058 flags
= rates
[i
].flags
;
1060 /* If HT40 and we have switched mode from 40 to 20 => don't update */
1061 if ((flags
& IEEE80211_TX_RC_40_MHZ_WIDTH
) &&
1062 !(ath_rc_priv
->ht_cap
& WLAN_RC_40_FLAG
))
1065 rix
= ath_rc_get_rateindex(rate_table
, &rates
[i
]);
1066 ath_rc_update_ht(sc
, ath_rc_priv
, tx_info
, rix
, xretries
, long_retry
);
1070 struct ath_rate_table
*ath_choose_rate_table(struct ath_softc
*sc
,
1071 enum ieee80211_band band
,
1076 struct ath_common
*common
= ath9k_hw_common(sc
->sc_ah
);
1079 case IEEE80211_BAND_2GHZ
:
1080 mode
= ATH9K_MODE_11G
;
1082 mode
= ATH9K_MODE_11NG_HT20
;
1084 mode
= ATH9K_MODE_11NG_HT40PLUS
;
1086 case IEEE80211_BAND_5GHZ
:
1087 mode
= ATH9K_MODE_11A
;
1089 mode
= ATH9K_MODE_11NA_HT20
;
1091 mode
= ATH9K_MODE_11NA_HT40PLUS
;
1094 ath_print(common
, ATH_DBG_CONFIG
, "Invalid band\n");
1098 BUG_ON(mode
>= ATH9K_MODE_MAX
);
1100 ath_print(common
, ATH_DBG_CONFIG
,
1101 "Choosing rate table for mode: %d\n", mode
);
1103 sc
->cur_rate_mode
= mode
;
1104 return hw_rate_table
[mode
];
1107 static void ath_rc_init(struct ath_softc
*sc
,
1108 struct ath_rate_priv
*ath_rc_priv
,
1109 struct ieee80211_supported_band
*sband
,
1110 struct ieee80211_sta
*sta
,
1111 const struct ath_rate_table
*rate_table
)
1113 struct ath_rateset
*rateset
= &ath_rc_priv
->neg_rates
;
1114 struct ath_common
*common
= ath9k_hw_common(sc
->sc_ah
);
1115 u8
*ht_mcs
= (u8
*)&ath_rc_priv
->neg_ht_rates
;
1116 u8 i
, j
, k
, hi
= 0, hthi
= 0;
1118 /* Initial rate table size. Will change depending
1119 * on the working rate set */
1120 ath_rc_priv
->rate_table_size
= RATE_TABLE_SIZE
;
1122 /* Initialize thresholds according to the global rate table */
1123 for (i
= 0 ; i
< ath_rc_priv
->rate_table_size
; i
++) {
1124 ath_rc_priv
->per
[i
] = 0;
1127 /* Determine the valid rates */
1128 ath_rc_init_valid_txmask(ath_rc_priv
);
1130 for (i
= 0; i
< WLAN_RC_PHY_MAX
; i
++) {
1131 for (j
= 0; j
< MAX_TX_RATE_PHY
; j
++)
1132 ath_rc_priv
->valid_phy_rateidx
[i
][j
] = 0;
1133 ath_rc_priv
->valid_phy_ratecnt
[i
] = 0;
1136 if (!rateset
->rs_nrates
) {
1137 /* No working rate, just initialize valid rates */
1138 hi
= ath_rc_init_validrates(ath_rc_priv
, rate_table
,
1139 ath_rc_priv
->ht_cap
);
1141 /* Use intersection of working rates and valid rates */
1142 hi
= ath_rc_setvalid_rates(ath_rc_priv
, rate_table
,
1143 rateset
, ath_rc_priv
->ht_cap
);
1144 if (ath_rc_priv
->ht_cap
& WLAN_RC_HT_FLAG
) {
1145 hthi
= ath_rc_setvalid_htrates(ath_rc_priv
,
1148 ath_rc_priv
->ht_cap
);
1150 hi
= A_MAX(hi
, hthi
);
1153 ath_rc_priv
->rate_table_size
= hi
+ 1;
1154 ath_rc_priv
->rate_max_phy
= 0;
1155 BUG_ON(ath_rc_priv
->rate_table_size
> RATE_TABLE_SIZE
);
1157 for (i
= 0, k
= 0; i
< WLAN_RC_PHY_MAX
; i
++) {
1158 for (j
= 0; j
< ath_rc_priv
->valid_phy_ratecnt
[i
]; j
++) {
1159 ath_rc_priv
->valid_rate_index
[k
++] =
1160 ath_rc_priv
->valid_phy_rateidx
[i
][j
];
1163 if (!ath_rc_valid_phyrate(i
, rate_table
->initial_ratemax
, 1)
1164 || !ath_rc_priv
->valid_phy_ratecnt
[i
])
1167 ath_rc_priv
->rate_max_phy
= ath_rc_priv
->valid_phy_rateidx
[i
][j
-1];
1169 BUG_ON(ath_rc_priv
->rate_table_size
> RATE_TABLE_SIZE
);
1170 BUG_ON(k
> RATE_TABLE_SIZE
);
1172 ath_rc_priv
->max_valid_rate
= k
;
1173 ath_rc_sort_validrates(rate_table
, ath_rc_priv
);
1174 ath_rc_priv
->rate_max_phy
= ath_rc_priv
->valid_rate_index
[k
-4];
1175 sc
->cur_rate_table
= rate_table
;
1177 ath_print(common
, ATH_DBG_CONFIG
,
1178 "RC Initialized with capabilities: 0x%x\n",
1179 ath_rc_priv
->ht_cap
);
1182 static u8
ath_rc_build_ht_caps(struct ath_softc
*sc
, struct ieee80211_sta
*sta
,
1183 bool is_cw40
, bool is_sgi40
)
1187 if (sta
->ht_cap
.ht_supported
) {
1188 caps
= WLAN_RC_HT_FLAG
;
1189 if (sc
->sc_ah
->caps
.tx_chainmask
!= 1 &&
1190 ath9k_hw_getcapability(sc
->sc_ah
, ATH9K_CAP_DS
, 0, NULL
)) {
1191 if (sta
->ht_cap
.mcs
.rx_mask
[1])
1192 caps
|= WLAN_RC_DS_FLAG
;
1195 caps
|= WLAN_RC_40_FLAG
;
1197 caps
|= WLAN_RC_SGI_FLAG
;
1203 /***********************************/
1204 /* mac80211 Rate Control callbacks */
1205 /***********************************/
1207 static void ath_tx_status(void *priv
, struct ieee80211_supported_band
*sband
,
1208 struct ieee80211_sta
*sta
, void *priv_sta
,
1209 struct sk_buff
*skb
)
1211 struct ath_softc
*sc
= priv
;
1212 struct ath_rate_priv
*ath_rc_priv
= priv_sta
;
1213 struct ieee80211_tx_info
*tx_info
= IEEE80211_SKB_CB(skb
);
1214 struct ieee80211_hdr
*hdr
;
1215 int final_ts_idx
= 0, tx_status
= 0, is_underrun
= 0;
1220 hdr
= (struct ieee80211_hdr
*)skb
->data
;
1221 fc
= hdr
->frame_control
;
1222 for (i
= 0; i
< IEEE80211_TX_MAX_RATES
; i
++) {
1223 struct ieee80211_tx_rate
*rate
= &tx_info
->status
.rates
[i
];
1228 long_retry
= rate
->count
- 1;
1231 if (!priv_sta
|| !ieee80211_is_data(fc
) ||
1232 !(tx_info
->pad
[0] & ATH_TX_INFO_UPDATE_RC
))
1235 if (tx_info
->flags
& IEEE80211_TX_STAT_TX_FILTERED
)
1239 * If an underrun error is seen assume it as an excessive retry only
1240 * if max frame trigger level has been reached (2 KB for singel stream,
1241 * and 4 KB for dual stream). Adjust the long retry as if the frame was
1242 * tried hw->max_rate_tries times to affect how ratectrl updates PER for
1243 * the failed rate. In case of congestion on the bus penalizing these
1244 * type of underruns should help hardware actually transmit new frames
1245 * successfully by eventually preferring slower rates. This itself
1246 * should also alleviate congestion on the bus.
1248 if ((tx_info
->pad
[0] & ATH_TX_INFO_UNDERRUN
) &&
1249 (sc
->sc_ah
->tx_trig_level
>= ath_rc_priv
->tx_triglevel_max
)) {
1254 if (tx_info
->pad
[0] & ATH_TX_INFO_XRETRY
)
1257 ath_rc_tx_status(sc
, ath_rc_priv
, tx_info
, final_ts_idx
, tx_status
,
1258 (is_underrun
) ? sc
->hw
->max_rate_tries
: long_retry
);
1260 /* Check if aggregation has to be enabled for this tid */
1261 if (conf_is_ht(&sc
->hw
->conf
) &&
1262 !(skb
->protocol
== cpu_to_be16(ETH_P_PAE
))) {
1263 if (ieee80211_is_data_qos(fc
)) {
1265 struct ath_node
*an
;
1267 qc
= ieee80211_get_qos_ctl(hdr
);
1269 an
= (struct ath_node
*)sta
->drv_priv
;
1271 if(ath_tx_aggr_check(sc
, an
, tid
))
1272 ieee80211_start_tx_ba_session(sta
, tid
);
1276 ath_debug_stat_rc(sc
, ath_rc_get_rateindex(sc
->cur_rate_table
,
1277 &tx_info
->status
.rates
[final_ts_idx
]));
1280 static void ath_rate_init(void *priv
, struct ieee80211_supported_band
*sband
,
1281 struct ieee80211_sta
*sta
, void *priv_sta
)
1283 struct ath_softc
*sc
= priv
;
1284 struct ath_rate_priv
*ath_rc_priv
= priv_sta
;
1285 const struct ath_rate_table
*rate_table
;
1286 bool is_cw40
, is_sgi40
;
1289 for (i
= 0; i
< sband
->n_bitrates
; i
++) {
1290 if (sta
->supp_rates
[sband
->band
] & BIT(i
)) {
1291 ath_rc_priv
->neg_rates
.rs_rates
[j
]
1292 = (sband
->bitrates
[i
].bitrate
* 2) / 10;
1296 ath_rc_priv
->neg_rates
.rs_nrates
= j
;
1298 if (sta
->ht_cap
.ht_supported
) {
1299 for (i
= 0, j
= 0; i
< 77; i
++) {
1300 if (sta
->ht_cap
.mcs
.rx_mask
[i
/8] & (1<<(i
%8)))
1301 ath_rc_priv
->neg_ht_rates
.rs_rates
[j
++] = i
;
1302 if (j
== ATH_RATE_MAX
)
1305 ath_rc_priv
->neg_ht_rates
.rs_nrates
= j
;
1308 is_cw40
= sta
->ht_cap
.cap
& IEEE80211_HT_CAP_SUP_WIDTH_20_40
;
1309 is_sgi40
= sta
->ht_cap
.cap
& IEEE80211_HT_CAP_SGI_40
;
1311 /* Choose rate table first */
1313 if ((sc
->sc_ah
->opmode
== NL80211_IFTYPE_STATION
) ||
1314 (sc
->sc_ah
->opmode
== NL80211_IFTYPE_MESH_POINT
) ||
1315 (sc
->sc_ah
->opmode
== NL80211_IFTYPE_ADHOC
)) {
1316 rate_table
= ath_choose_rate_table(sc
, sband
->band
,
1317 sta
->ht_cap
.ht_supported
, is_cw40
);
1319 rate_table
= hw_rate_table
[sc
->cur_rate_mode
];
1322 ath_rc_priv
->ht_cap
= ath_rc_build_ht_caps(sc
, sta
, is_cw40
, is_sgi40
);
1323 ath_rc_init(sc
, priv_sta
, sband
, sta
, rate_table
);
1326 static void ath_rate_update(void *priv
, struct ieee80211_supported_band
*sband
,
1327 struct ieee80211_sta
*sta
, void *priv_sta
,
1328 u32 changed
, enum nl80211_channel_type oper_chan_type
)
1330 struct ath_softc
*sc
= priv
;
1331 struct ath_rate_priv
*ath_rc_priv
= priv_sta
;
1332 const struct ath_rate_table
*rate_table
= NULL
;
1333 bool oper_cw40
= false, oper_sgi40
;
1334 bool local_cw40
= (ath_rc_priv
->ht_cap
& WLAN_RC_40_FLAG
) ?
1336 bool local_sgi40
= (ath_rc_priv
->ht_cap
& WLAN_RC_SGI_FLAG
) ?
1339 /* FIXME: Handle AP mode later when we support CWM */
1341 if (changed
& IEEE80211_RC_HT_CHANGED
) {
1342 if (sc
->sc_ah
->opmode
!= NL80211_IFTYPE_STATION
)
1345 if (oper_chan_type
== NL80211_CHAN_HT40MINUS
||
1346 oper_chan_type
== NL80211_CHAN_HT40PLUS
)
1349 oper_sgi40
= (sta
->ht_cap
.cap
& IEEE80211_HT_CAP_SGI_40
) ?
1352 if ((local_cw40
!= oper_cw40
) || (local_sgi40
!= oper_sgi40
)) {
1353 rate_table
= ath_choose_rate_table(sc
, sband
->band
,
1354 sta
->ht_cap
.ht_supported
,
1356 ath_rc_priv
->ht_cap
= ath_rc_build_ht_caps(sc
, sta
,
1357 oper_cw40
, oper_sgi40
);
1358 ath_rc_init(sc
, priv_sta
, sband
, sta
, rate_table
);
1360 ath_print(ath9k_hw_common(sc
->sc_ah
), ATH_DBG_CONFIG
,
1361 "Operating HT Bandwidth changed to: %d\n",
1362 sc
->hw
->conf
.channel_type
);
1363 sc
->cur_rate_table
= hw_rate_table
[sc
->cur_rate_mode
];
1368 static void *ath_rate_alloc(struct ieee80211_hw
*hw
, struct dentry
*debugfsdir
)
1370 struct ath_wiphy
*aphy
= hw
->priv
;
1374 static void ath_rate_free(void *priv
)
1379 static void *ath_rate_alloc_sta(void *priv
, struct ieee80211_sta
*sta
, gfp_t gfp
)
1381 struct ath_softc
*sc
= priv
;
1382 struct ath_rate_priv
*rate_priv
;
1384 rate_priv
= kzalloc(sizeof(struct ath_rate_priv
), gfp
);
1386 ath_print(ath9k_hw_common(sc
->sc_ah
), ATH_DBG_FATAL
,
1387 "Unable to allocate private rc structure\n");
1391 rate_priv
->tx_triglevel_max
= sc
->sc_ah
->caps
.tx_triglevel_max
;
1396 static void ath_rate_free_sta(void *priv
, struct ieee80211_sta
*sta
,
1399 struct ath_rate_priv
*rate_priv
= priv_sta
;
1403 static struct rate_control_ops ath_rate_ops
= {
1405 .name
= "ath9k_rate_control",
1406 .tx_status
= ath_tx_status
,
1407 .get_rate
= ath_get_rate
,
1408 .rate_init
= ath_rate_init
,
1409 .rate_update
= ath_rate_update
,
1410 .alloc
= ath_rate_alloc
,
1411 .free
= ath_rate_free
,
1412 .alloc_sta
= ath_rate_alloc_sta
,
1413 .free_sta
= ath_rate_free_sta
,
1416 int ath_rate_control_register(void)
1418 return ieee80211_rate_control_register(&ath_rate_ops
);
1421 void ath_rate_control_unregister(void)
1423 ieee80211_rate_control_unregister(&ath_rate_ops
);