drivers/net/wireless/ath/wil6210/pcie_bus.c

   1 /*
   2  * Copyright (c) 2012-2015 Qualcomm Atheros, Inc.
   3  *
   4  * Permission to use, copy, modify, and/or distribute this software for any
   5  * purpose with or without fee is hereby granted, provided that the above
   6  * copyright notice and this permission notice appear in all copies.
   7  *
   8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15  */
  16
  17 #include <linux/module.h>
  18 #include <linux/pci.h>
  19 #include <linux/moduleparam.h>
  20 #include <linux/interrupt.h>
  21
  22 #include "wil6210.h"
  23
  24 static bool use_msi = true;
  25 module_param(use_msi, bool, S_IRUGO);
  26 MODULE_PARM_DESC(use_msi, " Use MSI interrupt, default - true");
  27
  28 static
  29 void wil_set_capabilities(struct wil6210_priv *wil)
  30 {
  31         u32 rev_id = wil_r(wil, RGF_USER_JTAG_DEV_ID);
  32
  33         bitmap_zero(wil->hw_capabilities, hw_capability_last);
  34
  35         switch (rev_id) {
  36         case JTAG_DEV_ID_SPARROW_B0:
  37                 wil->hw_name = "Sparrow B0";
  38                 wil->hw_version = HW_VER_SPARROW_B0;
  39                 break;
  40         default:
  41                 wil_err(wil, "Unknown board hardware 0x%08x\n", rev_id);
  42                 wil->hw_name = "Unknown";
  43                 wil->hw_version = HW_VER_UNKNOWN;
  44         }
  45
  46         wil_info(wil, "Board hardware is %s\n", wil->hw_name);
  47 }
  48
  49 void wil_disable_irq(struct wil6210_priv *wil)
  50 {
  51         disable_irq(wil->pdev->irq);
  52 }
  53
  54 void wil_enable_irq(struct wil6210_priv *wil)
  55 {
  56         enable_irq(wil->pdev->irq);
  57 }
  58
  59 /* Bus ops */
  60 static int wil_if_pcie_enable(struct wil6210_priv *wil)
  61 {
  62         struct pci_dev *pdev = wil->pdev;
  63         int rc;
  64         /* on platforms with buggy ACPI, pdev->msi_enabled may be set to
  65          * allow pci_enable_device to work. This indicates INTx was not routed
  66          * and only MSI should be used
  67          */
  68         int msi_only = pdev->msi_enabled;
  69         bool _use_msi = use_msi;
  70
  71         wil_dbg_misc(wil, "%s()\n", __func__);
  72
  73         pdev->msi_enabled = 0;
  74
  75         pci_set_master(pdev);
  76
  77         wil_dbg_misc(wil, "Setup %s interrupt\n", use_msi ? "MSI" : "INTx");
  78
  79         if (use_msi && pci_enable_msi(pdev)) {
  80                 wil_err(wil, "pci_enable_msi failed, use INTx\n");
  81                 _use_msi = false;
  82         }
  83
  84         if (!_use_msi && msi_only) {
  85                 wil_err(wil, "Interrupt pin not routed, unable to use INTx\n");
  86                 rc = -ENODEV;
  87                 goto stop_master;
  88         }
  89
  90         rc = wil6210_init_irq(wil, pdev->irq, _use_msi);
  91         if (rc)
  92                 goto stop_master;
  93
  94         /* need reset here to obtain MAC */
  95         mutex_lock(&wil->mutex);
  96         rc = wil_reset(wil, false);
  97         mutex_unlock(&wil->mutex);
  98         if (rc)
  99                 goto release_irq;
 100
 101         return 0;
 102
 103  release_irq:
 104         wil6210_fini_irq(wil, pdev->irq);
 105         /* safe to call if no MSI */
 106         pci_disable_msi(pdev);
 107  stop_master:
 108         pci_clear_master(pdev);
 109         return rc;
 110 }
 111
 112 static int wil_if_pcie_disable(struct wil6210_priv *wil)
 113 {
 114         struct pci_dev *pdev = wil->pdev;
 115
 116         wil_dbg_misc(wil, "%s()\n", __func__);
 117
 118         pci_clear_master(pdev);
 119         /* disable and release IRQ */
 120         wil6210_fini_irq(wil, pdev->irq);
 121         /* safe to call if no MSI */
 122         pci_disable_msi(pdev);
 123         /* TODO: disable HW */
 124
 125         return 0;
 126 }
 127
 128 static int wil_platform_rop_ramdump(void *wil_handle, void *buf, uint32_t size)
 129 {
 130         struct wil6210_priv *wil = wil_handle;
 131
 132         if (!wil)
 133                 return -EINVAL;
 134
 135         return wil_fw_copy_crash_dump(wil, buf, size);
 136 }
 137
 138 static int wil_platform_rop_fw_recovery(void *wil_handle)
 139 {
 140         struct wil6210_priv *wil = wil_handle;
 141
 142         if (!wil)
 143                 return -EINVAL;
 144
 145         wil_fw_error_recovery(wil);
 146
 147         return 0;
 148 }
 149
 150 static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 151 {
 152         struct wil6210_priv *wil;
 153         struct device *dev = &pdev->dev;
 154         int rc;
 155         const struct wil_platform_rops rops = {
 156                 .ramdump = wil_platform_rop_ramdump,
 157                 .fw_recovery = wil_platform_rop_fw_recovery,
 158         };
 159
 160         /* check HW */
 161         dev_info(&pdev->dev, WIL_NAME
 162                  " device found [%04x:%04x] (rev %x)\n",
 163                  (int)pdev->vendor, (int)pdev->device, (int)pdev->revision);
 164
 165         if (pci_resource_len(pdev, 0) != WIL6210_MEM_SIZE) {
 166                 dev_err(&pdev->dev, "Not " WIL_NAME "? "
 167                         "BAR0 size is %lu while expecting %lu\n",
 168                         (ulong)pci_resource_len(pdev, 0), WIL6210_MEM_SIZE);
 169                 return -ENODEV;
 170         }
 171
 172         wil = wil_if_alloc(dev);
 173         if (IS_ERR(wil)) {
 174                 rc = (int)PTR_ERR(wil);
 175                 dev_err(dev, "wil_if_alloc failed: %d\n", rc);
 176                 return rc;
 177         }
 178         wil->pdev = pdev;
 179         pci_set_drvdata(pdev, wil);
 180         /* rollback to if_free */
 181
 182         wil->platform_handle =
 183                 wil_platform_init(&pdev->dev, &wil->platform_ops, &rops, wil);
 184         if (!wil->platform_handle) {
 185                 rc = -ENODEV;
 186                 wil_err(wil, "wil_platform_init failed\n");
 187                 goto if_free;
 188         }
 189         /* rollback to err_plat */
 190
 191         rc = pci_enable_device(pdev);
 192         if (rc) {
 193                 wil_err(wil,
 194                         "pci_enable_device failed, retry with MSI only\n");
 195                 /* Work around for platforms that can't allocate IRQ:
 196                  * retry with MSI only
 197                  */
 198                 pdev->msi_enabled = 1;
 199                 rc = pci_enable_device(pdev);
 200         }
 201         if (rc) {
 202                 wil_err(wil,
 203                         "pci_enable_device failed, even with MSI only\n");
 204                 goto err_plat;
 205         }
 206         /* rollback to err_disable_pdev */
 207
 208         rc = pci_request_region(pdev, 0, WIL_NAME);
 209         if (rc) {
 210                 wil_err(wil, "pci_request_region failed\n");
 211                 goto err_disable_pdev;
 212         }
 213         /* rollback to err_release_reg */
 214
 215         wil->csr = pci_ioremap_bar(pdev, 0);
 216         if (!wil->csr) {
 217                 wil_err(wil, "pci_ioremap_bar failed\n");
 218                 rc = -ENODEV;
 219                 goto err_release_reg;
 220         }
 221         /* rollback to err_iounmap */
 222         wil_info(wil, "CSR at %pR -> 0x%p\n", &pdev->resource[0], wil->csr);
 223
 224         wil_set_capabilities(wil);
 225         wil6210_clear_irq(wil);
 226
 227         /* FW should raise IRQ when ready */
 228         rc = wil_if_pcie_enable(wil);
 229         if (rc) {
 230                 wil_err(wil, "Enable device failed\n");
 231                 goto err_iounmap;
 232         }
 233         /* rollback to bus_disable */
 234
 235         rc = wil_if_add(wil);
 236         if (rc) {
 237                 wil_err(wil, "wil_if_add failed: %d\n", rc);
 238                 goto bus_disable;
 239         }
 240
 241         wil6210_debugfs_init(wil);
 242
 243
 244         return 0;
 245
 246 bus_disable:
 247         wil_if_pcie_disable(wil);
 248 err_iounmap:
 249         pci_iounmap(pdev, wil->csr);
 250 err_release_reg:
 251         pci_release_region(pdev, 0);
 252 err_disable_pdev:
 253         pci_disable_device(pdev);
 254 err_plat:
 255         if (wil->platform_ops.uninit)
 256                 wil->platform_ops.uninit(wil->platform_handle);
 257 if_free:
 258         wil_if_free(wil);
 259
 260         return rc;
 261 }
 262
 263 static void wil_pcie_remove(struct pci_dev *pdev)
 264 {
 265         struct wil6210_priv *wil = pci_get_drvdata(pdev);
 266         void __iomem *csr = wil->csr;
 267
 268         wil_dbg_misc(wil, "%s()\n", __func__);
 269
 270         wil6210_debugfs_remove(wil);
 271         wil_if_remove(wil);
 272         wil_if_pcie_disable(wil);
 273         pci_iounmap(pdev, csr);
 274         pci_release_region(pdev, 0);
 275         pci_disable_device(pdev);
 276         if (wil->platform_ops.uninit)
 277                 wil->platform_ops.uninit(wil->platform_handle);
 278         wil_p2p_wdev_free(wil);
 279         wil_if_free(wil);
 280 }
 281
 282 static const struct pci_device_id wil6210_pcie_ids[] = {
 283         { PCI_DEVICE(0x1ae9, 0x0310) },
 284         { PCI_DEVICE(0x1ae9, 0x0302) }, /* same as above, firmware broken */
 285         { /* end: all zeroes */ },
 286 };
 287 MODULE_DEVICE_TABLE(pci, wil6210_pcie_ids);
 288
 289 #ifdef CONFIG_PM
 290 #ifdef CONFIG_PM_SLEEP
 291
 292 static int wil6210_suspend(struct device *dev, bool is_runtime)
 293 {
 294         int rc = 0;
 295         struct pci_dev *pdev = to_pci_dev(dev);
 296         struct wil6210_priv *wil = pci_get_drvdata(pdev);
 297
 298         wil_dbg_pm(wil, "%s(%s)\n", __func__,
 299                    is_runtime ? "runtime" : "system");
 300
 301         rc = wil_can_suspend(wil, is_runtime);
 302         if (rc)
 303                 goto out;
 304
 305         rc = wil_suspend(wil, is_runtime);
 306         if (rc)
 307                 goto out;
 308
 309         /* TODO: how do I bring card in low power state? */
 310
 311         /* disable bus mastering */
 312         pci_clear_master(pdev);
 313         /* PCI will call pci_save_state(pdev) and pci_prepare_to_sleep(pdev) */
 314
 315 out:
 316         return rc;
 317 }
 318
 319 static int wil6210_resume(struct device *dev, bool is_runtime)
 320 {
 321         int rc = 0;
 322         struct pci_dev *pdev = to_pci_dev(dev);
 323         struct wil6210_priv *wil = pci_get_drvdata(pdev);
 324
 325         wil_dbg_pm(wil, "%s(%s)\n", __func__,
 326                    is_runtime ? "runtime" : "system");
 327
 328         /* allow master */
 329         pci_set_master(pdev);
 330
 331         rc = wil_resume(wil, is_runtime);
 332         if (rc)
 333                 pci_clear_master(pdev);
 334
 335         return rc;
 336 }
 337
 338 static int wil6210_pm_suspend(struct device *dev)
 339 {
 340         return wil6210_suspend(dev, false);
 341 }
 342
 343 static int wil6210_pm_resume(struct device *dev)
 344 {
 345         return wil6210_resume(dev, false);
 346 }
 347 #endif /* CONFIG_PM_SLEEP */
 348
 349 #endif /* CONFIG_PM */
 350
 351 static const struct dev_pm_ops wil6210_pm_ops = {
 352         SET_SYSTEM_SLEEP_PM_OPS(wil6210_pm_suspend, wil6210_pm_resume)
 353 };
 354
 355 static struct pci_driver wil6210_driver = {
 356         .probe          = wil_pcie_probe,
 357         .remove         = wil_pcie_remove,
 358         .id_table       = wil6210_pcie_ids,
 359         .name           = WIL_NAME,
 360         .driver         = {
 361                 .pm = &wil6210_pm_ops,
 362         },
 363 };
 364
 365 static int __init wil6210_driver_init(void)
 366 {
 367         int rc;
 368
 369         rc = wil_platform_modinit();
 370         if (rc)
 371                 return rc;
 372
 373         rc = pci_register_driver(&wil6210_driver);
 374         if (rc)
 375                 wil_platform_modexit();
 376         return rc;
 377 }
 378 module_init(wil6210_driver_init);
 379
 380 static void __exit wil6210_driver_exit(void)
 381 {
 382         pci_unregister_driver(&wil6210_driver);
 383         wil_platform_modexit();
 384 }
 385 module_exit(wil6210_driver_exit);
 386
 387 MODULE_LICENSE("Dual BSD/GPL");
 388 MODULE_AUTHOR("Qualcomm Atheros <wil6210@qca.qualcomm.com>");
 389 MODULE_DESCRIPTION("Driver for 60g WiFi WIL6210 card");