Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

[mirror_ubuntu-bionic-kernel.git] / drivers / net / wireless / ath5k / ath5k.h

/*
 * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
 * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#ifndef _ATH5K_H
#define _ATH5K_H

/* TODO: Clean up channel debuging -doesn't work anyway- and start
 * working on reg. control code using all available eeprom information
 * -rev. engineering needed- */
#define CHAN_DEBUG      0

#include <linux/io.h>
#include <linux/types.h>
#include <net/mac80211.h>

/* RX/TX descriptor hw structs
 * TODO: Driver part should only see sw structs */
#include "desc.h"

/* EEPROM structs/offsets
 * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities)
 * and clean up common bits, then introduce set/get functions in eeprom.c */
#include "eeprom.h"

/* PCI IDs */
#define PCI_DEVICE_ID_ATHEROS_AR5210            0x0007 /* AR5210 */
#define PCI_DEVICE_ID_ATHEROS_AR5311            0x0011 /* AR5311 */
#define PCI_DEVICE_ID_ATHEROS_AR5211            0x0012 /* AR5211 */
#define PCI_DEVICE_ID_ATHEROS_AR5212            0x0013 /* AR5212 */
#define PCI_DEVICE_ID_3COM_3CRDAG675            0x0013 /* 3CRDAG675 (Atheros AR5212) */
#define PCI_DEVICE_ID_3COM_2_3CRPAG175          0x0013 /* 3CRPAG175 (Atheros AR5212) */
#define PCI_DEVICE_ID_ATHEROS_AR5210_AP         0x0207 /* AR5210 (Early) */
#define PCI_DEVICE_ID_ATHEROS_AR5212_IBM        0x1014 /* AR5212 (IBM MiniPCI) */
#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT    0x1107 /* AR5210 (no eeprom) */
#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT    0x1113 /* AR5212 (no eeprom) */
#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT    0x1112 /* AR5211 (no eeprom) */
#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA       0xf013 /* AR5212 (emulation board) */
#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY     0xff12 /* AR5211 (emulation board) */
#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B    0xf11b /* AR5211 (emulation board) */
#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2       0x0052 /* AR5312 WMAC (AP31) */
#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7       0x0057 /* AR5312 WMAC (AP30-040) */
#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8       0x0058 /* AR5312 WMAC (AP43-030) */
#define PCI_DEVICE_ID_ATHEROS_AR5212_0014       0x0014 /* AR5212 compatible */
#define PCI_DEVICE_ID_ATHEROS_AR5212_0015       0x0015 /* AR5212 compatible */
#define PCI_DEVICE_ID_ATHEROS_AR5212_0016       0x0016 /* AR5212 compatible */
#define PCI_DEVICE_ID_ATHEROS_AR5212_0017       0x0017 /* AR5212 compatible */
#define PCI_DEVICE_ID_ATHEROS_AR5212_0018       0x0018 /* AR5212 compatible */
#define PCI_DEVICE_ID_ATHEROS_AR5212_0019       0x0019 /* AR5212 compatible */
#define PCI_DEVICE_ID_ATHEROS_AR2413            0x001a /* AR2413 (Griffin-lite) */
#define PCI_DEVICE_ID_ATHEROS_AR5413            0x001b /* AR5413 (Eagle) */
#define PCI_DEVICE_ID_ATHEROS_AR5424            0x001c /* AR5424 (Condor PCI-E) */
#define PCI_DEVICE_ID_ATHEROS_AR5416            0x0023 /* AR5416 */
#define PCI_DEVICE_ID_ATHEROS_AR5418            0x0024 /* AR5418 */

/****************************\
  GENERIC DRIVER DEFINITIONS
\****************************/

#define ATH5K_PRINTF(fmt, ...)   printk("%s: " fmt, __func__, ##__VA_ARGS__)

#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \
        printk(_level "ath5k %s: " _fmt, \
                ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \
                ##__VA_ARGS__)

#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \
        if (net_ratelimit()) \
                ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \
        } while (0)

#define ATH5K_INFO(_sc, _fmt, ...) \
        ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__)

#define ATH5K_WARN(_sc, _fmt, ...) \
        ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__)

#define ATH5K_ERR(_sc, _fmt, ...) \
        ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)

/*
 * AR5K REGISTER ACCESS
 */

/* Some macros to read/write fields */

/* First shift, then mask */
#define AR5K_REG_SM(_val, _flags)                                       \
        (((_val) << _flags##_S) & (_flags))

/* First mask, then shift */
#define AR5K_REG_MS(_val, _flags)                                       \
        (((_val) & (_flags)) >> _flags##_S)

/* Some registers can hold multiple values of interest. For this
 * reason when we want to write to these registers we must first
 * retrieve the values which we do not want to clear (lets call this
 * old_data) and then set the register with this and our new_value:
 * ( old_data | new_value) */
#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val)                     \
        ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \
            (((_val) << _flags##_S) & (_flags)), _reg)

#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask)                   \
        ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) &           \
                        (_mask)) | (_flags), _reg)

#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags)                          \
        ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg)

#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags)                 \
        ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg)

/* Access to PHY registers */
#define AR5K_PHY_READ(ah, _reg)                                 \
        ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2))

#define AR5K_PHY_WRITE(ah, _reg, _val)                                  \
        ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2))

/* Access QCU registers per queue */
#define AR5K_REG_READ_Q(ah, _reg, _queue)                               \
        (ath5k_hw_reg_read(ah, _reg) & (1 << _queue))                   \

#define AR5K_REG_WRITE_Q(ah, _reg, _queue)                              \
        ath5k_hw_reg_write(ah, (1 << _queue), _reg)

#define AR5K_Q_ENABLE_BITS(_reg, _queue) do {                           \
        _reg |= 1 << _queue;                                            \
} while (0)

#define AR5K_Q_DISABLE_BITS(_reg, _queue) do {                          \
        _reg &= ~(1 << _queue);                                         \
} while (0)

/* Used while writing initvals */
#define AR5K_REG_WAIT(_i) do {                                          \
        if (_i % 64)                                                    \
                udelay(1);                                              \
} while (0)

/* Register dumps are done per operation mode */
#define AR5K_INI_RFGAIN_5GHZ            0
#define AR5K_INI_RFGAIN_2GHZ            1

/* TODO: Clean this up */
#define AR5K_INI_VAL_11A                0
#define AR5K_INI_VAL_11A_TURBO          1
#define AR5K_INI_VAL_11B                2
#define AR5K_INI_VAL_11G                3
#define AR5K_INI_VAL_11G_TURBO          4
#define AR5K_INI_VAL_XR                 0
#define AR5K_INI_VAL_MAX                5

#define AR5K_RF5111_INI_RF_MAX_BANKS    AR5K_MAX_RF_BANKS
#define AR5K_RF5112_INI_RF_MAX_BANKS    AR5K_MAX_RF_BANKS

/* Used for BSSID etc manipulation */
#define AR5K_LOW_ID(_a)(                                \
(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24  \
)

#define AR5K_HIGH_ID(_a)        ((_a)[4] | (_a)[5] << 8)

/*
 * Some tuneable values (these should be changeable by the user)
 * TODO: Make use of them and add more options OR use debug/configfs
 */
#define AR5K_TUNE_DMA_BEACON_RESP               2
#define AR5K_TUNE_SW_BEACON_RESP                10
#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF       0
#define AR5K_TUNE_RADAR_ALERT                   false
#define AR5K_TUNE_MIN_TX_FIFO_THRES             1
#define AR5K_TUNE_MAX_TX_FIFO_THRES             ((IEEE80211_MAX_LEN / 64) + 1)
#define AR5K_TUNE_REGISTER_TIMEOUT              20000
/* Register for RSSI threshold has a mask of 0xff, so 255 seems to
 * be the max value. */
#define AR5K_TUNE_RSSI_THRES                    129
/* This must be set when setting the RSSI threshold otherwise it can
 * prevent a reset. If AR5K_RSSI_THR is read after writing to it
 * the BMISS_THRES will be seen as 0, seems harware doesn't keep
 * track of it. Max value depends on harware. For AR5210 this is just 7.
 * For AR5211+ this seems to be up to 255. */
#define AR5K_TUNE_BMISS_THRES                   7
#define AR5K_TUNE_REGISTER_DWELL_TIME           20000
#define AR5K_TUNE_BEACON_INTERVAL               100
#define AR5K_TUNE_AIFS                          2
#define AR5K_TUNE_AIFS_11B                      2
#define AR5K_TUNE_AIFS_XR                       0
#define AR5K_TUNE_CWMIN                         15
#define AR5K_TUNE_CWMIN_11B                     31
#define AR5K_TUNE_CWMIN_XR                      3
#define AR5K_TUNE_CWMAX                         1023
#define AR5K_TUNE_CWMAX_11B                     1023
#define AR5K_TUNE_CWMAX_XR                      7
#define AR5K_TUNE_NOISE_FLOOR                   -72
#define AR5K_TUNE_MAX_TXPOWER                   60
#define AR5K_TUNE_DEFAULT_TXPOWER               30
#define AR5K_TUNE_TPC_TXPOWER                   true
#define AR5K_TUNE_ANT_DIVERSITY                 true
#define AR5K_TUNE_HWTXTRIES                     4

#define AR5K_INIT_CARR_SENSE_EN                 1

/*Swap RX/TX Descriptor for big endian archs*/
#if defined(__BIG_ENDIAN)
#define AR5K_INIT_CFG   (               \
        AR5K_CFG_SWTD | AR5K_CFG_SWRD   \
)
#else
#define AR5K_INIT_CFG   0x00000000
#endif

/* Initial values */
#define AR5K_INIT_TX_LATENCY                    502
#define AR5K_INIT_USEC                          39
#define AR5K_INIT_USEC_TURBO                    79
#define AR5K_INIT_USEC_32                       31
#define AR5K_INIT_SLOT_TIME                     396
#define AR5K_INIT_SLOT_TIME_TURBO               480
#define AR5K_INIT_ACK_CTS_TIMEOUT               1024
#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO         0x08000800
#define AR5K_INIT_PROG_IFS                      920
#define AR5K_INIT_PROG_IFS_TURBO                960
#define AR5K_INIT_EIFS                          3440
#define AR5K_INIT_EIFS_TURBO                    6880
#define AR5K_INIT_SIFS                          560
#define AR5K_INIT_SIFS_TURBO                    480
#define AR5K_INIT_SH_RETRY                      10
#define AR5K_INIT_LG_RETRY                      AR5K_INIT_SH_RETRY
#define AR5K_INIT_SSH_RETRY                     32
#define AR5K_INIT_SLG_RETRY                     AR5K_INIT_SSH_RETRY
#define AR5K_INIT_TX_RETRY                      10

#define AR5K_INIT_TRANSMIT_LATENCY              (                       \
        (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) |       \
        (AR5K_INIT_USEC)                                                \
)
#define AR5K_INIT_TRANSMIT_LATENCY_TURBO        (                       \
        (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) |       \
        (AR5K_INIT_USEC_TURBO)                                          \
)
#define AR5K_INIT_PROTO_TIME_CNTRL              (                       \
        (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) |      \
        (AR5K_INIT_PROG_IFS)                                            \
)
#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO        (                       \
        (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \
        (AR5K_INIT_PROG_IFS_TURBO)                                      \
)

/* token to use for aifs, cwmin, cwmax in MadWiFi */
#define AR5K_TXQ_USEDEFAULT     ((u32) -1)

/* GENERIC CHIPSET DEFINITIONS */

/* MAC Chips */
enum ath5k_version {
        AR5K_AR5210     = 0,
        AR5K_AR5211     = 1,
        AR5K_AR5212     = 2,
};

/* PHY Chips */
enum ath5k_radio {
        AR5K_RF5110     = 0,
        AR5K_RF5111     = 1,
        AR5K_RF5112     = 2,
        AR5K_RF2413     = 3,
        AR5K_RF5413     = 4,
        AR5K_RF2425     = 5,
};

/*
 * Common silicon revision/version values
 */

enum ath5k_srev_type {
        AR5K_VERSION_VER,
        AR5K_VERSION_RAD,
};

struct ath5k_srev_name {
        const char              *sr_name;
        enum ath5k_srev_type    sr_type;
        u_int                   sr_val;
};

#define AR5K_SREV_UNKNOWN       0xffff

#define AR5K_SREV_VER_AR5210    0x00
#define AR5K_SREV_VER_AR5311    0x10
#define AR5K_SREV_VER_AR5311A   0x20
#define AR5K_SREV_VER_AR5311B   0x30
#define AR5K_SREV_VER_AR5211    0x40
#define AR5K_SREV_VER_AR5212    0x50
#define AR5K_SREV_VER_AR5213    0x55
#define AR5K_SREV_VER_AR5213A   0x59
#define AR5K_SREV_VER_AR2413    0x78
#define AR5K_SREV_VER_AR2414    0x79
#define AR5K_SREV_VER_AR2424    0xa0 /* PCI-E */
#define AR5K_SREV_VER_AR5424    0xa3 /* PCI-E */
#define AR5K_SREV_VER_AR5413    0xa4
#define AR5K_SREV_VER_AR5414    0xa5
#define AR5K_SREV_VER_AR5416    0xc0 /* PCI-E */
#define AR5K_SREV_VER_AR5418    0xca /* PCI-E */
#define AR5K_SREV_VER_AR2425    0xe2 /* PCI-E */

#define AR5K_SREV_RAD_5110      0x00
#define AR5K_SREV_RAD_5111      0x10
#define AR5K_SREV_RAD_5111A     0x15
#define AR5K_SREV_RAD_2111      0x20
#define AR5K_SREV_RAD_5112      0x30
#define AR5K_SREV_RAD_5112A     0x35
#define AR5K_SREV_RAD_5112B     0x36
#define AR5K_SREV_RAD_2112      0x40
#define AR5K_SREV_RAD_2112A     0x45
#define AR5K_SREV_RAD_2112B     0x46
#define AR5K_SREV_RAD_SC0       0x50    /* Found on 2413/2414 */
#define AR5K_SREV_RAD_SC1       0x60    /* Found on 5413/5414 */
#define AR5K_SREV_RAD_SC2       0xa0    /* Found on 2424-5/5424 */
#define AR5K_SREV_RAD_5133      0xc0    /* MIMO found on 5418 */

/* IEEE defs */
#define IEEE80211_MAX_LEN       2500

/* TODO add support to mac80211 for vendor-specific rates and modes */

/*
 * Some of this information is based on Documentation from:
 *
 * http://madwifi.org/wiki/ChipsetFeatures/SuperAG
 *
 * Modulation for Atheros' eXtended Range - range enhancing extension that is
 * supposed to double the distance an Atheros client device can keep a
 * connection with an Atheros access point. This is achieved by increasing
 * the receiver sensitivity up to, -105dBm, which is about 20dB above what
 * the 802.11 specifications demand. In addition, new (proprietary) data rates
 * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s.
 *
 * Please note that can you either use XR or TURBO but you cannot use both,
 * they are exclusive.
 *
 */
#define MODULATION_XR           0x00000200
/*
 * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a
 * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s
 * signaling rate achieved through the bonding of two 54Mbit/s 802.11g
 * channels. To use this feature your Access Point must also suport it.
 * There is also a distinction between "static" and "dynamic" turbo modes:
 *
 * - Static: is the dumb version: devices set to this mode stick to it until
 *     the mode is turned off.
 * - Dynamic: is the intelligent version, the network decides itself if it
 *     is ok to use turbo. As soon as traffic is detected on adjacent channels
 *     (which would get used in turbo mode), or when a non-turbo station joins
 *     the network, turbo mode won't be used until the situation changes again.
 *     Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which
 *     monitors the used radio band in order to decide whether turbo mode may
 *     be used or not.
 *
 * This article claims Super G sticks to bonding of channels 5 and 6 for
 * USA:
 *
 * http://www.pcworld.com/article/id,113428-page,1/article.html
 *
 * The channel bonding seems to be driver specific though. In addition to
 * deciding what channels will be used, these "Turbo" modes are accomplished
 * by also enabling the following features:
 *
 * - Bursting: allows multiple frames to be sent at once, rather than pausing
 *     after each frame. Bursting is a standards-compliant feature that can be
 *     used with any Access Point.
 * - Fast frames: increases the amount of information that can be sent per
 *     frame, also resulting in a reduction of transmission overhead. It is a
 *     proprietary feature that needs to be supported by the Access Point.
 * - Compression: data frames are compressed in real time using a Lempel Ziv
 *     algorithm. This is done transparently. Once this feature is enabled,
 *     compression and decompression takes place inside the chipset, without
 *     putting additional load on the host CPU.
 *
 */
#define MODULATION_TURBO        0x00000080

enum ath5k_driver_mode {
        AR5K_MODE_11A           =       0,
        AR5K_MODE_11A_TURBO     =       1,
        AR5K_MODE_11B           =       2,
        AR5K_MODE_11G           =       3,
        AR5K_MODE_11G_TURBO     =       4,
        AR5K_MODE_XR            =       0,
        AR5K_MODE_MAX           =       5
};


/****************\
  TX DEFINITIONS
\****************/

/*
 * TX Status descriptor
 */
struct ath5k_tx_status {
        u16     ts_seqnum;
        u16     ts_tstamp;
        u8      ts_status;
        u8      ts_rate;
        s8      ts_rssi;
        u8      ts_shortretry;
        u8      ts_longretry;
        u8      ts_virtcol;
        u8      ts_antenna;
};

#define AR5K_TXSTAT_ALTRATE     0x80
#define AR5K_TXERR_XRETRY       0x01
#define AR5K_TXERR_FILT         0x02
#define AR5K_TXERR_FIFO         0x04

/**
 * enum ath5k_tx_queue - Queue types used to classify tx queues.
 * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue
 * @AR5K_TX_QUEUE_DATA: A normal data queue
 * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue
 * @AR5K_TX_QUEUE_BEACON: The beacon queue
 * @AR5K_TX_QUEUE_CAB: The after-beacon queue
 * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue
 */
enum ath5k_tx_queue {
        AR5K_TX_QUEUE_INACTIVE = 0,
        AR5K_TX_QUEUE_DATA,
        AR5K_TX_QUEUE_XR_DATA,
        AR5K_TX_QUEUE_BEACON,
        AR5K_TX_QUEUE_CAB,
        AR5K_TX_QUEUE_UAPSD,
};

#define AR5K_NUM_TX_QUEUES              10
#define AR5K_NUM_TX_QUEUES_NOQCU        2

/*
 * Queue syb-types to classify normal data queues.
 * These are the 4 Access Categories as defined in
 * WME spec. 0 is the lowest priority and 4 is the
 * highest. Normal data that hasn't been classified
 * goes to the Best Effort AC.
 */
enum ath5k_tx_queue_subtype {
        AR5K_WME_AC_BK = 0,     /*Background traffic*/
        AR5K_WME_AC_BE,         /*Best-effort (normal) traffic)*/
        AR5K_WME_AC_VI,         /*Video traffic*/
        AR5K_WME_AC_VO,         /*Voice traffic*/
};

/*
 * Queue ID numbers as returned by the hw functions, each number
 * represents a hw queue. If hw does not support hw queues
 * (eg 5210) all data goes in one queue. These match
 * d80211 definitions (net80211/MadWiFi don't use them).
 */
enum ath5k_tx_queue_id {
        AR5K_TX_QUEUE_ID_NOQCU_DATA     = 0,
        AR5K_TX_QUEUE_ID_NOQCU_BEACON   = 1,
        AR5K_TX_QUEUE_ID_DATA_MIN       = 0, /*IEEE80211_TX_QUEUE_DATA0*/
        AR5K_TX_QUEUE_ID_DATA_MAX       = 4, /*IEEE80211_TX_QUEUE_DATA4*/
        AR5K_TX_QUEUE_ID_DATA_SVP       = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/
        AR5K_TX_QUEUE_ID_CAB            = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/
        AR5K_TX_QUEUE_ID_BEACON         = 7, /*IEEE80211_TX_QUEUE_BEACON*/
        AR5K_TX_QUEUE_ID_UAPSD          = 8,
        AR5K_TX_QUEUE_ID_XR_DATA        = 9,
};

/*
 * Flags to set hw queue's parameters...
 */
#define AR5K_TXQ_FLAG_TXOKINT_ENABLE            0x0001  /* Enable TXOK interrupt */
#define AR5K_TXQ_FLAG_TXERRINT_ENABLE           0x0002  /* Enable TXERR interrupt */
#define AR5K_TXQ_FLAG_TXEOLINT_ENABLE           0x0004  /* Enable TXEOL interrupt -not used- */
#define AR5K_TXQ_FLAG_TXDESCINT_ENABLE          0x0008  /* Enable TXDESC interrupt -not used- */
#define AR5K_TXQ_FLAG_TXURNINT_ENABLE           0x0010  /* Enable TXURN interrupt */
#define AR5K_TXQ_FLAG_BACKOFF_DISABLE           0x0020  /* Disable random post-backoff */
#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0040  /* Enable ready time expiry policy (?)*/
#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0080  /* Enable backoff while bursting */
#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS         0x0100  /* Disable backoff while bursting */
#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE        0x0200  /* Enable hw compression -not implemented-*/

/*
 * A struct to hold tx queue's parameters
 */
struct ath5k_txq_info {
        enum ath5k_tx_queue tqi_type;
        enum ath5k_tx_queue_subtype tqi_subtype;
        u16     tqi_flags;      /* Tx queue flags (see above) */
        u32     tqi_aifs;       /* Arbitrated Interframe Space */
        s32     tqi_cw_min;     /* Minimum Contention Window */
        s32     tqi_cw_max;     /* Maximum Contention Window */
        u32     tqi_cbr_period; /* Constant bit rate period */
        u32     tqi_cbr_overflow_limit;
        u32     tqi_burst_time;
        u32     tqi_ready_time; /* Not used */
};

/*
 * Transmit packet types.
 * used on tx control descriptor
 * TODO: Use them inside base.c corectly
 */
enum ath5k_pkt_type {
        AR5K_PKT_TYPE_NORMAL            = 0,
        AR5K_PKT_TYPE_ATIM              = 1,
        AR5K_PKT_TYPE_PSPOLL            = 2,
        AR5K_PKT_TYPE_BEACON            = 3,
        AR5K_PKT_TYPE_PROBE_RESP        = 4,
        AR5K_PKT_TYPE_PIFS              = 5,
};

/*
 * TX power and TPC settings
 */
#define AR5K_TXPOWER_OFDM(_r, _v)       (                       \
        ((0 & 1) << ((_v) + 6)) |                               \
        (((ah->ah_txpower.txp_rates[(_r)]) & 0x3f) << (_v))     \
)

#define AR5K_TXPOWER_CCK(_r, _v)        (                       \
        (ah->ah_txpower.txp_rates[(_r)] & 0x3f) << (_v) \
)

/*
 * DMA size definitions (2^n+2)
 */
enum ath5k_dmasize {
        AR5K_DMASIZE_4B = 0,
        AR5K_DMASIZE_8B,
        AR5K_DMASIZE_16B,
        AR5K_DMASIZE_32B,
        AR5K_DMASIZE_64B,
        AR5K_DMASIZE_128B,
        AR5K_DMASIZE_256B,
        AR5K_DMASIZE_512B
};


/****************\
  RX DEFINITIONS
\****************/

/*
 * RX Status descriptor
 */
struct ath5k_rx_status {
        u16     rs_datalen;
        u16     rs_tstamp;
        u8      rs_status;
        u8      rs_phyerr;
        s8      rs_rssi;
        u8      rs_keyix;
        u8      rs_rate;
        u8      rs_antenna;
        u8      rs_more;
};

#define AR5K_RXERR_CRC          0x01
#define AR5K_RXERR_PHY          0x02
#define AR5K_RXERR_FIFO         0x04
#define AR5K_RXERR_DECRYPT      0x08
#define AR5K_RXERR_MIC          0x10
#define AR5K_RXKEYIX_INVALID    ((u8) - 1)
#define AR5K_TXKEYIX_INVALID    ((u32) - 1)


/**************************\
 BEACON TIMERS DEFINITIONS
\**************************/

#define AR5K_BEACON_PERIOD      0x0000ffff
#define AR5K_BEACON_ENA         0x00800000 /*enable beacon xmit*/
#define AR5K_BEACON_RESET_TSF   0x01000000 /*force a TSF reset*/

#if 0
/**
 * struct ath5k_beacon_state - Per-station beacon timer state.
 * @bs_interval: in TU's, can also include the above flags
 * @bs_cfp_max_duration: if non-zero hw is setup to coexist with a
 *      Point Coordination Function capable AP
 */
struct ath5k_beacon_state {
        u32     bs_next_beacon;
        u32     bs_next_dtim;
        u32     bs_interval;
        u8      bs_dtim_period;
        u8      bs_cfp_period;
        u16     bs_cfp_max_duration;
        u16     bs_cfp_du_remain;
        u16     bs_tim_offset;
        u16     bs_sleep_duration;
        u16     bs_bmiss_threshold;
        u32     bs_cfp_next;
};
#endif


/*
 * TSF to TU conversion:
 *
 * TSF is a 64bit value in usec (microseconds).
 * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of
 * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024).
 */
#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10)


/*******************************\
  GAIN OPTIMIZATION DEFINITIONS
\*******************************/

enum ath5k_rfgain {
        AR5K_RFGAIN_INACTIVE = 0,
        AR5K_RFGAIN_READ_REQUESTED,
        AR5K_RFGAIN_NEED_CHANGE,
};

#define AR5K_GAIN_CRN_FIX_BITS_5111             4
#define AR5K_GAIN_CRN_FIX_BITS_5112             7
#define AR5K_GAIN_CRN_MAX_FIX_BITS              AR5K_GAIN_CRN_FIX_BITS_5112
#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN          15
#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN          20
#define AR5K_GAIN_CCK_PROBE_CORR                5
#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA           15
#define AR5K_GAIN_STEP_COUNT                    10
#define AR5K_GAIN_PARAM_TX_CLIP                 0
#define AR5K_GAIN_PARAM_PD_90                   1
#define AR5K_GAIN_PARAM_PD_84                   2
#define AR5K_GAIN_PARAM_GAIN_SEL                3
#define AR5K_GAIN_PARAM_MIX_ORN                 0
#define AR5K_GAIN_PARAM_PD_138                  1
#define AR5K_GAIN_PARAM_PD_137                  2
#define AR5K_GAIN_PARAM_PD_136                  3
#define AR5K_GAIN_PARAM_PD_132                  4
#define AR5K_GAIN_PARAM_PD_131                  5
#define AR5K_GAIN_PARAM_PD_130                  6
#define AR5K_GAIN_CHECK_ADJUST(_g)              \
        ((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high)

struct ath5k_gain_opt_step {
        s16                             gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS];
        s32                             gos_gain;
};

struct ath5k_gain {
        u32                     g_step_idx;
        u32                     g_current;
        u32                     g_target;
        u32                     g_low;
        u32                     g_high;
        u32                     g_f_corr;
        u32                     g_active;
        const struct ath5k_gain_opt_step        *g_step;
};


/********************\
  COMMON DEFINITIONS
\********************/

#define AR5K_SLOT_TIME_9        396
#define AR5K_SLOT_TIME_20       880
#define AR5K_SLOT_TIME_MAX      0xffff

/* channel_flags */
#define CHANNEL_CW_INT  0x0008  /* Contention Window interference detected */
#define CHANNEL_TURBO   0x0010  /* Turbo Channel */
#define CHANNEL_CCK     0x0020  /* CCK channel */
#define CHANNEL_OFDM    0x0040  /* OFDM channel */
#define CHANNEL_2GHZ    0x0080  /* 2GHz channel. */
#define CHANNEL_5GHZ    0x0100  /* 5GHz channel */
#define CHANNEL_PASSIVE 0x0200  /* Only passive scan allowed */
#define CHANNEL_DYN     0x0400  /* Dynamic CCK-OFDM channel (for g operation) */
#define CHANNEL_XR      0x0800  /* XR channel */

#define CHANNEL_A       (CHANNEL_5GHZ|CHANNEL_OFDM)
#define CHANNEL_B       (CHANNEL_2GHZ|CHANNEL_CCK)
#define CHANNEL_G       (CHANNEL_2GHZ|CHANNEL_OFDM)
#define CHANNEL_T       (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
#define CHANNEL_TG      (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
#define CHANNEL_108A    CHANNEL_T
#define CHANNEL_108G    CHANNEL_TG
#define CHANNEL_X       (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR)

#define CHANNEL_ALL     (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \
                CHANNEL_TURBO)

#define CHANNEL_ALL_NOTURBO     (CHANNEL_ALL & ~CHANNEL_TURBO)
#define CHANNEL_MODES           CHANNEL_ALL

/*
 * Used internaly for reset_tx_queue).
 * Also see struct struct ieee80211_channel.
 */
#define IS_CHAN_XR(_c)  ((_c.hw_value & CHANNEL_XR) != 0)
#define IS_CHAN_B(_c)   ((_c.hw_value & CHANNEL_B) != 0)

/*
 * The following structure is used to map 2GHz channels to
 * 5GHz Atheros channels.
 * TODO: Clean up
 */
struct ath5k_athchan_2ghz {
        u32     a2_flags;
        u16     a2_athchan;
};


/******************\
  RATE DEFINITIONS
\******************/

/**
 * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32.
 *
 * The rate code is used to get the RX rate or set the TX rate on the
 * hardware descriptors. It is also used for internal modulation control
 * and settings.
 *
 * This is the hardware rate map we are aware of:
 *
 * rate_code   0x01    0x02    0x03    0x04    0x05    0x06    0x07    0x08
 * rate_kbps   3000    1000    ?       ?       ?       2000    500     48000
 *
 * rate_code   0x09    0x0A    0x0B    0x0C    0x0D    0x0E    0x0F    0x10
 * rate_kbps   24000   12000   6000    54000   36000   18000   9000    ?
 *
 * rate_code   17      18      19      20      21      22      23      24
 * rate_kbps   ?       ?       ?       ?       ?       ?       ?       11000
 *
 * rate_code   25      26      27      28      29      30      31      32
 * rate_kbps   5500    2000    1000    11000S  5500S   2000S   ?       ?
 *
 * "S" indicates CCK rates with short preamble.
 *
 * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the
 * lowest 4 bits, so they are the same as below with a 0xF mask.
 * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M).
 * We handle this in ath5k_setup_bands().
 */
#define AR5K_MAX_RATES 32

/* B */
#define ATH5K_RATE_CODE_1M      0x1B
#define ATH5K_RATE_CODE_2M      0x1A
#define ATH5K_RATE_CODE_5_5M    0x19
#define ATH5K_RATE_CODE_11M     0x18
/* A and G */
#define ATH5K_RATE_CODE_6M      0x0B
#define ATH5K_RATE_CODE_9M      0x0F
#define ATH5K_RATE_CODE_12M     0x0A
#define ATH5K_RATE_CODE_18M     0x0E
#define ATH5K_RATE_CODE_24M     0x09
#define ATH5K_RATE_CODE_36M     0x0D
#define ATH5K_RATE_CODE_48M     0x08
#define ATH5K_RATE_CODE_54M     0x0C
/* XR */
#define ATH5K_RATE_CODE_XR_500K 0x07
#define ATH5K_RATE_CODE_XR_1M   0x02
#define ATH5K_RATE_CODE_XR_2M   0x06
#define ATH5K_RATE_CODE_XR_3M   0x01

/* adding this flag to rate_code enables short preamble */
#define AR5K_SET_SHORT_PREAMBLE 0x04

/*
 * Crypto definitions
 */

#define AR5K_KEYCACHE_SIZE      8

/***********************\
 HW RELATED DEFINITIONS
\***********************/

/*
 * Misc definitions
 */
#define AR5K_RSSI_EP_MULTIPLIER (1<<7)

#define AR5K_ASSERT_ENTRY(_e, _s) do {          \
        if (_e >= _s)                           \
                return (false);                 \
} while (0)

enum ath5k_ant_setting {
        AR5K_ANT_VARIABLE       = 0,    /* variable by programming */
        AR5K_ANT_FIXED_A        = 1,    /* fixed to 11a frequencies */
        AR5K_ANT_FIXED_B        = 2,    /* fixed to 11b frequencies */
        AR5K_ANT_MAX            = 3,
};

/*
 * Hardware interrupt abstraction
 */

/**
 * enum ath5k_int - Hardware interrupt masks helpers
 *
 * @AR5K_INT_RX: mask to identify received frame interrupts, of type
 *      AR5K_ISR_RXOK or AR5K_ISR_RXERR
 * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?)
 * @AR5K_INT_RXNOFRM: No frame received (?)
 * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The
 *      Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's
 *      LinkPtr is NULL. For more details, refer to:
 *      http://www.freepatentsonline.com/20030225739.html
 * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors).
 *      Note that Rx overrun is not always fatal, on some chips we can continue
 *      operation without reseting the card, that's why int_fatal is not
 *      common for all chips.
 * @AR5K_INT_TX: mask to identify received frame interrupts, of type
 *      AR5K_ISR_TXOK or AR5K_ISR_TXERR
 * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?)
 * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold
 *      We currently do increments on interrupt by
 *      (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2
 * @AR5K_INT_MIB: Indicates the Management Information Base counters should be
 *      checked. We should do this with ath5k_hw_update_mib_counters() but
 *      it seems we should also then do some noise immunity work.
 * @AR5K_INT_RXPHY: RX PHY Error
 * @AR5K_INT_RXKCM: ??
 * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a
 *      beacon that must be handled in software. The alternative is if you
 *      have VEOL support, in that case you let the hardware deal with things.
 * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing
 *      beacons from the AP have associated with, we should probably try to
 *      reassociate. When in IBSS mode this might mean we have not received
 *      any beacons from any local stations. Note that every station in an
 *      IBSS schedules to send beacons at the Target Beacon Transmission Time
 *      (TBTT) with a random backoff.
 * @AR5K_INT_BNR: Beacon Not Ready interrupt - ??
 * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now
 *      until properly handled
 * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA
 *      errors. These types of errors we can enable seem to be of type
 *      AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR.
 * @AR5K_INT_GLOBAL: Seems to be used to clear and set the IER
 * @AR5K_INT_NOCARD: signals the card has been removed
 * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same
 *      bit value
 *
 * These are mapped to take advantage of some common bits
 * between the MACs, to be able to set intr properties
 * easier. Some of them are not used yet inside hw.c. Most map
 * to the respective hw interrupt value as they are common amogst different
 * MACs.
 */
enum ath5k_int {
        AR5K_INT_RX     = 0x00000001, /* Not common */
        AR5K_INT_RXDESC = 0x00000002,
        AR5K_INT_RXNOFRM = 0x00000008,
        AR5K_INT_RXEOL  = 0x00000010,
        AR5K_INT_RXORN  = 0x00000020,
        AR5K_INT_TX     = 0x00000040, /* Not common */
        AR5K_INT_TXDESC = 0x00000080,
        AR5K_INT_TXURN  = 0x00000800,
        AR5K_INT_MIB    = 0x00001000,
        AR5K_INT_RXPHY  = 0x00004000,
        AR5K_INT_RXKCM  = 0x00008000,
        AR5K_INT_SWBA   = 0x00010000,
        AR5K_INT_BMISS  = 0x00040000,
        AR5K_INT_BNR    = 0x00100000, /* Not common */
        AR5K_INT_GPIO   = 0x01000000,
        AR5K_INT_FATAL  = 0x40000000, /* Not common */
        AR5K_INT_GLOBAL = 0x80000000,

        AR5K_INT_COMMON  = AR5K_INT_RXNOFRM
                        | AR5K_INT_RXDESC
                        | AR5K_INT_RXEOL
                        | AR5K_INT_RXORN
                        | AR5K_INT_TXURN
                        | AR5K_INT_TXDESC
                        | AR5K_INT_MIB
                        | AR5K_INT_RXPHY
                        | AR5K_INT_RXKCM
                        | AR5K_INT_SWBA
                        | AR5K_INT_BMISS
                        | AR5K_INT_GPIO,
        AR5K_INT_NOCARD = 0xffffffff
};

/*
 * Power management
 */
enum ath5k_power_mode {
        AR5K_PM_UNDEFINED = 0,
        AR5K_PM_AUTO,
        AR5K_PM_AWAKE,
        AR5K_PM_FULL_SLEEP,
        AR5K_PM_NETWORK_SLEEP,
};

/*
 * These match net80211 definitions (not used in
 * mac80211).
 * TODO: Clean this up
 */
#define AR5K_LED_INIT   0 /*IEEE80211_S_INIT*/
#define AR5K_LED_SCAN   1 /*IEEE80211_S_SCAN*/
#define AR5K_LED_AUTH   2 /*IEEE80211_S_AUTH*/
#define AR5K_LED_ASSOC  3 /*IEEE80211_S_ASSOC*/
#define AR5K_LED_RUN    4 /*IEEE80211_S_RUN*/

/* GPIO-controlled software LED */
#define AR5K_SOFTLED_PIN        0
#define AR5K_SOFTLED_ON         0
#define AR5K_SOFTLED_OFF        1

/*
 * Chipset capabilities -see ath5k_hw_get_capability-
 * get_capability function is not yet fully implemented
 * in ath5k so most of these don't work yet...
 * TODO: Implement these & merge with _TUNE_ stuff above
 */
enum ath5k_capability_type {
        AR5K_CAP_REG_DMN                = 0,    /* Used to get current reg. domain id */
        AR5K_CAP_TKIP_MIC               = 2,    /* Can handle TKIP MIC in hardware */
        AR5K_CAP_TKIP_SPLIT             = 3,    /* TKIP uses split keys */
        AR5K_CAP_PHYCOUNTERS            = 4,    /* PHY error counters */
        AR5K_CAP_DIVERSITY              = 5,    /* Supports fast diversity */
        AR5K_CAP_NUM_TXQUEUES           = 6,    /* Used to get max number of hw txqueues */
        AR5K_CAP_VEOL                   = 7,    /* Supports virtual EOL */
        AR5K_CAP_COMPRESSION            = 8,    /* Supports compression */
        AR5K_CAP_BURST                  = 9,    /* Supports packet bursting */
        AR5K_CAP_FASTFRAME              = 10,   /* Supports fast frames */
        AR5K_CAP_TXPOW                  = 11,   /* Used to get global tx power limit */
        AR5K_CAP_TPC                    = 12,   /* Can do per-packet tx power control (needed for 802.11a) */
        AR5K_CAP_BSSIDMASK              = 13,   /* Supports bssid mask */
        AR5K_CAP_MCAST_KEYSRCH          = 14,   /* Supports multicast key search */
        AR5K_CAP_TSF_ADJUST             = 15,   /* Supports beacon tsf adjust */
        AR5K_CAP_XR                     = 16,   /* Supports XR mode */
        AR5K_CAP_WME_TKIPMIC            = 17,   /* Supports TKIP MIC when using WMM */
        AR5K_CAP_CHAN_HALFRATE          = 18,   /* Supports half rate channels */
        AR5K_CAP_CHAN_QUARTERRATE       = 19,   /* Supports quarter rate channels */
        AR5K_CAP_RFSILENT               = 20,   /* Supports RFsilent */
};


/* XXX: we *may* move cap_range stuff to struct wiphy */
struct ath5k_capabilities {
        /*
         * Supported PHY modes
         * (ie. CHANNEL_A, CHANNEL_B, ...)
         */
        DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX);

        /*
         * Frequency range (without regulation restrictions)
         */
        struct {
                u16     range_2ghz_min;
                u16     range_2ghz_max;
                u16     range_5ghz_min;
                u16     range_5ghz_max;
        } cap_range;

        /*
         * Values stored in the EEPROM (some of them...)
         */
        struct ath5k_eeprom_info        cap_eeprom;

        /*
         * Queue information
         */
        struct {
                u8      q_tx_num;
        } cap_queues;
};


/***************************************\
  HARDWARE ABSTRACTION LAYER STRUCTURE
\***************************************/

/*
 * Misc defines
 */

#define AR5K_MAX_GPIO           10
#define AR5K_MAX_RF_BANKS       8

/* TODO: Clean up and merge with ath5k_softc */
struct ath5k_hw {
        u32                     ah_magic;

        struct ath5k_softc      *ah_sc;
        void __iomem            *ah_iobase;

        enum ath5k_int          ah_imr;

        enum ieee80211_if_types ah_op_mode;
        enum ath5k_power_mode   ah_power_mode;
        struct ieee80211_channel ah_current_channel;
        bool                    ah_turbo;
        bool                    ah_calibration;
        bool                    ah_running;
        bool                    ah_single_chip;
        enum ath5k_rfgain       ah_rf_gain;

        u32                     ah_mac_srev;
        u16                     ah_mac_version;
        u16                     ah_mac_revision;
        u16                     ah_phy_revision;
        u16                     ah_radio_5ghz_revision;
        u16                     ah_radio_2ghz_revision;
        u32                     ah_phy_spending;

        enum ath5k_version      ah_version;
        enum ath5k_radio        ah_radio;
        u32                     ah_phy;

        bool                    ah_5ghz;
        bool                    ah_2ghz;

#define ah_regdomain            ah_capabilities.cap_regdomain.reg_current
#define ah_regdomain_hw         ah_capabilities.cap_regdomain.reg_hw
#define ah_modes                ah_capabilities.cap_mode
#define ah_ee_version           ah_capabilities.cap_eeprom.ee_version

        u32                     ah_atim_window;
        u32                     ah_aifs;
        u32                     ah_cw_min;
        u32                     ah_cw_max;
        bool                    ah_software_retry;
        u32                     ah_limit_tx_retries;

        u32                     ah_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
        bool                    ah_ant_diversity;

        u8                      ah_sta_id[ETH_ALEN];

        /* Current BSSID we are trying to assoc to / creating.
         * This is passed by mac80211 on config_interface() and cached here for
         * use in resets */
        u8                      ah_bssid[ETH_ALEN];

        u32                     ah_gpio[AR5K_MAX_GPIO];
        int                     ah_gpio_npins;

        struct ath5k_capabilities ah_capabilities;

        struct ath5k_txq_info   ah_txq[AR5K_NUM_TX_QUEUES];
        u32                     ah_txq_status;
        u32                     ah_txq_imr_txok;
        u32                     ah_txq_imr_txerr;
        u32                     ah_txq_imr_txurn;
        u32                     ah_txq_imr_txdesc;
        u32                     ah_txq_imr_txeol;
        u32                     *ah_rf_banks;
        size_t                  ah_rf_banks_size;
        struct ath5k_gain       ah_gain;
        u32                     ah_offset[AR5K_MAX_RF_BANKS];

        struct {
                u16             txp_pcdac[AR5K_EEPROM_POWER_TABLE_SIZE];
                u16             txp_rates[AR5K_MAX_RATES];
                s16             txp_min;
                s16             txp_max;
                bool            txp_tpc;
                s16             txp_ofdm;
        } ah_txpower;

        struct {
                bool            r_enabled;
                int             r_last_alert;
                struct ieee80211_channel r_last_channel;
        } ah_radar;

        /* noise floor from last periodic calibration */
        s32                     ah_noise_floor;

        /*
         * Function pointers
         */
        int (*ah_setup_rx_desc)(struct ath5k_hw *ah, struct ath5k_desc *desc,
                                u32 size, unsigned int flags);
        int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
                unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
                unsigned int, unsigned int, unsigned int, unsigned int,
                unsigned int, unsigned int, unsigned int);
        int (*ah_setup_mrr_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
                unsigned int, unsigned int, unsigned int, unsigned int,
                unsigned int, unsigned int);
        int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
                struct ath5k_tx_status *);
        int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *,
                struct ath5k_rx_status *);
};

/*
 * Prototypes
 */

/* Attach/Detach Functions */
extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version);
extern void ath5k_hw_detach(struct ath5k_hw *ah);

/* Reset Functions */
extern int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial);
extern int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, struct ieee80211_channel *channel, bool change_channel);
/* Power management functions */
extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration);

/* DMA Related Functions */
extern void ath5k_hw_start_rx_dma(struct ath5k_hw *ah);
extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah);
extern u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah);
extern void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr);
extern int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue);
extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue);
extern u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue);
extern int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue,
                                u32 phys_addr);
extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase);
/* Interrupt handling */
extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah);
extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask);
extern enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum
ath5k_int new_mask);
extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_low_level_stats *stats);

/* EEPROM access functions */
extern int ath5k_eeprom_init(struct ath5k_hw *ah);
extern int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac);

/* Protocol Control Unit Functions */
extern int ath5k_hw_set_opmode(struct ath5k_hw *ah);
/* BSSID Functions */
extern void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac);
extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id);
extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
/* Receive start/stop functions */
extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
extern void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah);
/* RX Filter functions */
extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1);
extern int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah);
extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter);
/* Beacon control functions */
extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah);
extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah);
extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah);
extern void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval);
#if 0
extern int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, const struct ath5k_beacon_state *state);
extern void ath5k_hw_reset_beacon(struct ath5k_hw *ah);
extern int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr);
#endif
/* ACK bit rate */
void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high);
/* ACK/CTS Timeouts */
extern int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout);
extern unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah);
extern int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout);
extern unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah);
/* Key table (WEP) functions */
extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry);
extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry);
extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac);
extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac);

/* Queue Control Unit, DFS Control Unit Functions */
extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info);
extern int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
                                const struct ath5k_txq_info *queue_info);
extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah,
                                enum ath5k_tx_queue queue_type,
                                struct ath5k_txq_info *queue_info);
extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue);
extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue);
extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah);
extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);

/* Hardware Descriptor Functions */
extern int ath5k_hw_init_desc_functions(struct ath5k_hw *ah);

/* GPIO Functions */
extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state);
extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio);
extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level);

/* Misc functions */
int ath5k_hw_set_capabilities(struct ath5k_hw *ah);
extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result);
extern int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id);
extern int ath5k_hw_disable_pspoll(struct ath5k_hw *ah);

/* Initial register settings functions */
extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel);

/* Initialize RF */
extern int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode);
extern int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq);
extern enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah);
extern int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah);
/* PHY/RF channel functions */
extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
/* PHY calibration */
extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
/* Misc PHY functions */
extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant);
extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
/* TX power setup */
extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int txpower);
extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power);

/*
 * Functions used internaly
 */

/*
 * Translate usec to hw clock units
 */
static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo)
{
        return turbo ? (usec * 80) : (usec * 40);
}

/*
 * Translate hw clock units to usec
 */
static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo)
{
        return turbo ? (clock / 80) : (clock / 40);
}

/*
 * Read from a register
 */
static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
{
        return ioread32(ah->ah_iobase + reg);
}

/*
 * Write to a register
 */
static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
{
        iowrite32(val, ah->ah_iobase + reg);
}

#if defined(_ATH5K_RESET) || defined(_ATH5K_PHY)
/*
 * Check if a register write has been completed
 */
static int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag,
                u32 val, bool is_set)
{
        int i;
        u32 data;

        for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) {
                data = ath5k_hw_reg_read(ah, reg);
                if (is_set && (data & flag))
                        break;
                else if ((data & flag) == val)
                        break;
                udelay(15);
        }

        return (i <= 0) ? -EAGAIN : 0;
}
#endif

static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits)
{
        u32 retval = 0, bit, i;

        for (i = 0; i < bits; i++) {
                bit = (val >> i) & 1;
                retval = (retval << 1) | bit;
        }

        return retval;
}

#endif