2 * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
3 * Copyright (c) 2004-2005 Atheros Communications, Inc.
4 * Copyright (c) 2006 Devicescape Software, Inc.
5 * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
6 * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer,
15 * without modification.
16 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
17 * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
18 * redistribution must be conditioned upon including a substantially
19 * similar Disclaimer requirement for further binary redistribution.
20 * 3. Neither the names of the above-listed copyright holders nor the names
21 * of any contributors may be used to endorse or promote products derived
22 * from this software without specific prior written permission.
24 * Alternatively, this software may be distributed under the terms of the
25 * GNU General Public License ("GPL") version 2 as published by the Free
26 * Software Foundation.
29 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
30 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
31 * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
32 * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
33 * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
34 * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
35 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
36 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
37 * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
38 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
39 * THE POSSIBILITY OF SUCH DAMAGES.
43 #include <linux/module.h>
44 #include <linux/delay.h>
45 #include <linux/hardirq.h>
48 #include <linux/netdevice.h>
49 #include <linux/cache.h>
50 #include <linux/pci.h>
51 #include <linux/ethtool.h>
52 #include <linux/uaccess.h>
54 #include <net/ieee80211_radiotap.h>
56 #include <asm/unaligned.h>
62 static int ath5k_calinterval
= 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */
63 static int modparam_nohwcrypt
;
64 module_param_named(nohwcrypt
, modparam_nohwcrypt
, int, 0444);
65 MODULE_PARM_DESC(nohwcrypt
, "Disable hardware encryption.");
73 MODULE_AUTHOR("Jiri Slaby");
74 MODULE_AUTHOR("Nick Kossifidis");
75 MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards.");
76 MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards");
77 MODULE_LICENSE("Dual BSD/GPL");
78 MODULE_VERSION("0.6.0 (EXPERIMENTAL)");
82 static const struct pci_device_id ath5k_pci_id_table
[] = {
83 { PCI_VDEVICE(ATHEROS
, 0x0207), .driver_data
= AR5K_AR5210
}, /* 5210 early */
84 { PCI_VDEVICE(ATHEROS
, 0x0007), .driver_data
= AR5K_AR5210
}, /* 5210 */
85 { PCI_VDEVICE(ATHEROS
, 0x0011), .driver_data
= AR5K_AR5211
}, /* 5311 - this is on AHB bus !*/
86 { PCI_VDEVICE(ATHEROS
, 0x0012), .driver_data
= AR5K_AR5211
}, /* 5211 */
87 { PCI_VDEVICE(ATHEROS
, 0x0013), .driver_data
= AR5K_AR5212
}, /* 5212 */
88 { PCI_VDEVICE(3COM_2
, 0x0013), .driver_data
= AR5K_AR5212
}, /* 3com 5212 */
89 { PCI_VDEVICE(3COM
, 0x0013), .driver_data
= AR5K_AR5212
}, /* 3com 3CRDAG675 5212 */
90 { PCI_VDEVICE(ATHEROS
, 0x1014), .driver_data
= AR5K_AR5212
}, /* IBM minipci 5212 */
91 { PCI_VDEVICE(ATHEROS
, 0x0014), .driver_data
= AR5K_AR5212
}, /* 5212 combatible */
92 { PCI_VDEVICE(ATHEROS
, 0x0015), .driver_data
= AR5K_AR5212
}, /* 5212 combatible */
93 { PCI_VDEVICE(ATHEROS
, 0x0016), .driver_data
= AR5K_AR5212
}, /* 5212 combatible */
94 { PCI_VDEVICE(ATHEROS
, 0x0017), .driver_data
= AR5K_AR5212
}, /* 5212 combatible */
95 { PCI_VDEVICE(ATHEROS
, 0x0018), .driver_data
= AR5K_AR5212
}, /* 5212 combatible */
96 { PCI_VDEVICE(ATHEROS
, 0x0019), .driver_data
= AR5K_AR5212
}, /* 5212 combatible */
97 { PCI_VDEVICE(ATHEROS
, 0x001a), .driver_data
= AR5K_AR5212
}, /* 2413 Griffin-lite */
98 { PCI_VDEVICE(ATHEROS
, 0x001b), .driver_data
= AR5K_AR5212
}, /* 5413 Eagle */
99 { PCI_VDEVICE(ATHEROS
, 0x001c), .driver_data
= AR5K_AR5212
}, /* PCI-E cards */
100 { PCI_VDEVICE(ATHEROS
, 0x001d), .driver_data
= AR5K_AR5212
}, /* 2417 Nala */
103 MODULE_DEVICE_TABLE(pci
, ath5k_pci_id_table
);
106 static const struct ath5k_srev_name srev_names
[] = {
107 { "5210", AR5K_VERSION_MAC
, AR5K_SREV_AR5210
},
108 { "5311", AR5K_VERSION_MAC
, AR5K_SREV_AR5311
},
109 { "5311A", AR5K_VERSION_MAC
, AR5K_SREV_AR5311A
},
110 { "5311B", AR5K_VERSION_MAC
, AR5K_SREV_AR5311B
},
111 { "5211", AR5K_VERSION_MAC
, AR5K_SREV_AR5211
},
112 { "5212", AR5K_VERSION_MAC
, AR5K_SREV_AR5212
},
113 { "5213", AR5K_VERSION_MAC
, AR5K_SREV_AR5213
},
114 { "5213A", AR5K_VERSION_MAC
, AR5K_SREV_AR5213A
},
115 { "2413", AR5K_VERSION_MAC
, AR5K_SREV_AR2413
},
116 { "2414", AR5K_VERSION_MAC
, AR5K_SREV_AR2414
},
117 { "5424", AR5K_VERSION_MAC
, AR5K_SREV_AR5424
},
118 { "5413", AR5K_VERSION_MAC
, AR5K_SREV_AR5413
},
119 { "5414", AR5K_VERSION_MAC
, AR5K_SREV_AR5414
},
120 { "2415", AR5K_VERSION_MAC
, AR5K_SREV_AR2415
},
121 { "5416", AR5K_VERSION_MAC
, AR5K_SREV_AR5416
},
122 { "5418", AR5K_VERSION_MAC
, AR5K_SREV_AR5418
},
123 { "2425", AR5K_VERSION_MAC
, AR5K_SREV_AR2425
},
124 { "2417", AR5K_VERSION_MAC
, AR5K_SREV_AR2417
},
125 { "xxxxx", AR5K_VERSION_MAC
, AR5K_SREV_UNKNOWN
},
126 { "5110", AR5K_VERSION_RAD
, AR5K_SREV_RAD_5110
},
127 { "5111", AR5K_VERSION_RAD
, AR5K_SREV_RAD_5111
},
128 { "5111A", AR5K_VERSION_RAD
, AR5K_SREV_RAD_5111A
},
129 { "2111", AR5K_VERSION_RAD
, AR5K_SREV_RAD_2111
},
130 { "5112", AR5K_VERSION_RAD
, AR5K_SREV_RAD_5112
},
131 { "5112A", AR5K_VERSION_RAD
, AR5K_SREV_RAD_5112A
},
132 { "5112B", AR5K_VERSION_RAD
, AR5K_SREV_RAD_5112B
},
133 { "2112", AR5K_VERSION_RAD
, AR5K_SREV_RAD_2112
},
134 { "2112A", AR5K_VERSION_RAD
, AR5K_SREV_RAD_2112A
},
135 { "2112B", AR5K_VERSION_RAD
, AR5K_SREV_RAD_2112B
},
136 { "2413", AR5K_VERSION_RAD
, AR5K_SREV_RAD_2413
},
137 { "5413", AR5K_VERSION_RAD
, AR5K_SREV_RAD_5413
},
138 { "2316", AR5K_VERSION_RAD
, AR5K_SREV_RAD_2316
},
139 { "2317", AR5K_VERSION_RAD
, AR5K_SREV_RAD_2317
},
140 { "5424", AR5K_VERSION_RAD
, AR5K_SREV_RAD_5424
},
141 { "5133", AR5K_VERSION_RAD
, AR5K_SREV_RAD_5133
},
142 { "xxxxx", AR5K_VERSION_RAD
, AR5K_SREV_UNKNOWN
},
145 static const struct ieee80211_rate ath5k_rates
[] = {
147 .hw_value
= ATH5K_RATE_CODE_1M
, },
149 .hw_value
= ATH5K_RATE_CODE_2M
,
150 .hw_value_short
= ATH5K_RATE_CODE_2M
| AR5K_SET_SHORT_PREAMBLE
,
151 .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
153 .hw_value
= ATH5K_RATE_CODE_5_5M
,
154 .hw_value_short
= ATH5K_RATE_CODE_5_5M
| AR5K_SET_SHORT_PREAMBLE
,
155 .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
157 .hw_value
= ATH5K_RATE_CODE_11M
,
158 .hw_value_short
= ATH5K_RATE_CODE_11M
| AR5K_SET_SHORT_PREAMBLE
,
159 .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
161 .hw_value
= ATH5K_RATE_CODE_6M
,
164 .hw_value
= ATH5K_RATE_CODE_9M
,
167 .hw_value
= ATH5K_RATE_CODE_12M
,
170 .hw_value
= ATH5K_RATE_CODE_18M
,
173 .hw_value
= ATH5K_RATE_CODE_24M
,
176 .hw_value
= ATH5K_RATE_CODE_36M
,
179 .hw_value
= ATH5K_RATE_CODE_48M
,
182 .hw_value
= ATH5K_RATE_CODE_54M
,
188 * Prototypes - PCI stack related functions
190 static int __devinit
ath5k_pci_probe(struct pci_dev
*pdev
,
191 const struct pci_device_id
*id
);
192 static void __devexit
ath5k_pci_remove(struct pci_dev
*pdev
);
194 static int ath5k_pci_suspend(struct pci_dev
*pdev
,
196 static int ath5k_pci_resume(struct pci_dev
*pdev
);
198 #define ath5k_pci_suspend NULL
199 #define ath5k_pci_resume NULL
200 #endif /* CONFIG_PM */
202 static struct pci_driver ath5k_pci_driver
= {
203 .name
= KBUILD_MODNAME
,
204 .id_table
= ath5k_pci_id_table
,
205 .probe
= ath5k_pci_probe
,
206 .remove
= __devexit_p(ath5k_pci_remove
),
207 .suspend
= ath5k_pci_suspend
,
208 .resume
= ath5k_pci_resume
,
214 * Prototypes - MAC 802.11 stack related functions
216 static int ath5k_tx(struct ieee80211_hw
*hw
, struct sk_buff
*skb
);
217 static int ath5k_reset(struct ath5k_softc
*sc
, bool stop
, bool change_channel
);
218 static int ath5k_reset_wake(struct ath5k_softc
*sc
);
219 static int ath5k_start(struct ieee80211_hw
*hw
);
220 static void ath5k_stop(struct ieee80211_hw
*hw
);
221 static int ath5k_add_interface(struct ieee80211_hw
*hw
,
222 struct ieee80211_if_init_conf
*conf
);
223 static void ath5k_remove_interface(struct ieee80211_hw
*hw
,
224 struct ieee80211_if_init_conf
*conf
);
225 static int ath5k_config(struct ieee80211_hw
*hw
, u32 changed
);
226 static int ath5k_config_interface(struct ieee80211_hw
*hw
,
227 struct ieee80211_vif
*vif
,
228 struct ieee80211_if_conf
*conf
);
229 static void ath5k_configure_filter(struct ieee80211_hw
*hw
,
230 unsigned int changed_flags
,
231 unsigned int *new_flags
,
232 int mc_count
, struct dev_mc_list
*mclist
);
233 static int ath5k_set_key(struct ieee80211_hw
*hw
,
234 enum set_key_cmd cmd
,
235 struct ieee80211_vif
*vif
, struct ieee80211_sta
*sta
,
236 struct ieee80211_key_conf
*key
);
237 static int ath5k_get_stats(struct ieee80211_hw
*hw
,
238 struct ieee80211_low_level_stats
*stats
);
239 static int ath5k_get_tx_stats(struct ieee80211_hw
*hw
,
240 struct ieee80211_tx_queue_stats
*stats
);
241 static u64
ath5k_get_tsf(struct ieee80211_hw
*hw
);
242 static void ath5k_set_tsf(struct ieee80211_hw
*hw
, u64 tsf
);
243 static void ath5k_reset_tsf(struct ieee80211_hw
*hw
);
244 static int ath5k_beacon_update(struct ath5k_softc
*sc
,
245 struct sk_buff
*skb
);
246 static void ath5k_bss_info_changed(struct ieee80211_hw
*hw
,
247 struct ieee80211_vif
*vif
,
248 struct ieee80211_bss_conf
*bss_conf
,
251 static const struct ieee80211_ops ath5k_hw_ops
= {
253 .start
= ath5k_start
,
255 .add_interface
= ath5k_add_interface
,
256 .remove_interface
= ath5k_remove_interface
,
257 .config
= ath5k_config
,
258 .config_interface
= ath5k_config_interface
,
259 .configure_filter
= ath5k_configure_filter
,
260 .set_key
= ath5k_set_key
,
261 .get_stats
= ath5k_get_stats
,
263 .get_tx_stats
= ath5k_get_tx_stats
,
264 .get_tsf
= ath5k_get_tsf
,
265 .set_tsf
= ath5k_set_tsf
,
266 .reset_tsf
= ath5k_reset_tsf
,
267 .bss_info_changed
= ath5k_bss_info_changed
,
271 * Prototypes - Internal functions
274 static int ath5k_attach(struct pci_dev
*pdev
,
275 struct ieee80211_hw
*hw
);
276 static void ath5k_detach(struct pci_dev
*pdev
,
277 struct ieee80211_hw
*hw
);
278 /* Channel/mode setup */
279 static inline short ath5k_ieee2mhz(short chan
);
280 static unsigned int ath5k_copy_channels(struct ath5k_hw
*ah
,
281 struct ieee80211_channel
*channels
,
284 static int ath5k_setup_bands(struct ieee80211_hw
*hw
);
285 static int ath5k_chan_set(struct ath5k_softc
*sc
,
286 struct ieee80211_channel
*chan
);
287 static void ath5k_setcurmode(struct ath5k_softc
*sc
,
289 static void ath5k_mode_setup(struct ath5k_softc
*sc
);
291 /* Descriptor setup */
292 static int ath5k_desc_alloc(struct ath5k_softc
*sc
,
293 struct pci_dev
*pdev
);
294 static void ath5k_desc_free(struct ath5k_softc
*sc
,
295 struct pci_dev
*pdev
);
297 static int ath5k_rxbuf_setup(struct ath5k_softc
*sc
,
298 struct ath5k_buf
*bf
);
299 static int ath5k_txbuf_setup(struct ath5k_softc
*sc
,
300 struct ath5k_buf
*bf
);
301 static inline void ath5k_txbuf_free(struct ath5k_softc
*sc
,
302 struct ath5k_buf
*bf
)
307 pci_unmap_single(sc
->pdev
, bf
->skbaddr
, bf
->skb
->len
,
309 dev_kfree_skb_any(bf
->skb
);
313 static inline void ath5k_rxbuf_free(struct ath5k_softc
*sc
,
314 struct ath5k_buf
*bf
)
319 pci_unmap_single(sc
->pdev
, bf
->skbaddr
, sc
->rxbufsize
,
321 dev_kfree_skb_any(bf
->skb
);
327 static struct ath5k_txq
*ath5k_txq_setup(struct ath5k_softc
*sc
,
328 int qtype
, int subtype
);
329 static int ath5k_beaconq_setup(struct ath5k_hw
*ah
);
330 static int ath5k_beaconq_config(struct ath5k_softc
*sc
);
331 static void ath5k_txq_drainq(struct ath5k_softc
*sc
,
332 struct ath5k_txq
*txq
);
333 static void ath5k_txq_cleanup(struct ath5k_softc
*sc
);
334 static void ath5k_txq_release(struct ath5k_softc
*sc
);
336 static int ath5k_rx_start(struct ath5k_softc
*sc
);
337 static void ath5k_rx_stop(struct ath5k_softc
*sc
);
338 static unsigned int ath5k_rx_decrypted(struct ath5k_softc
*sc
,
339 struct ath5k_desc
*ds
,
341 struct ath5k_rx_status
*rs
);
342 static void ath5k_tasklet_rx(unsigned long data
);
344 static void ath5k_tx_processq(struct ath5k_softc
*sc
,
345 struct ath5k_txq
*txq
);
346 static void ath5k_tasklet_tx(unsigned long data
);
347 /* Beacon handling */
348 static int ath5k_beacon_setup(struct ath5k_softc
*sc
,
349 struct ath5k_buf
*bf
);
350 static void ath5k_beacon_send(struct ath5k_softc
*sc
);
351 static void ath5k_beacon_config(struct ath5k_softc
*sc
);
352 static void ath5k_beacon_update_timers(struct ath5k_softc
*sc
, u64 bc_tsf
);
353 static void ath5k_tasklet_beacon(unsigned long data
);
355 static inline u64
ath5k_extend_tsf(struct ath5k_hw
*ah
, u32 rstamp
)
357 u64 tsf
= ath5k_hw_get_tsf64(ah
);
359 if ((tsf
& 0x7fff) < rstamp
)
362 return (tsf
& ~0x7fff) | rstamp
;
365 /* Interrupt handling */
366 static int ath5k_init(struct ath5k_softc
*sc
);
367 static int ath5k_stop_locked(struct ath5k_softc
*sc
);
368 static int ath5k_stop_hw(struct ath5k_softc
*sc
);
369 static irqreturn_t
ath5k_intr(int irq
, void *dev_id
);
370 static void ath5k_tasklet_reset(unsigned long data
);
372 static void ath5k_calibrate(unsigned long data
);
375 * Module init/exit functions
384 ret
= pci_register_driver(&ath5k_pci_driver
);
386 printk(KERN_ERR
"ath5k_pci: can't register pci driver\n");
396 pci_unregister_driver(&ath5k_pci_driver
);
398 ath5k_debug_finish();
401 module_init(init_ath5k_pci
);
402 module_exit(exit_ath5k_pci
);
405 /********************\
406 * PCI Initialization *
407 \********************/
410 ath5k_chip_name(enum ath5k_srev_type type
, u_int16_t val
)
412 const char *name
= "xxxxx";
415 for (i
= 0; i
< ARRAY_SIZE(srev_names
); i
++) {
416 if (srev_names
[i
].sr_type
!= type
)
419 if ((val
& 0xf0) == srev_names
[i
].sr_val
)
420 name
= srev_names
[i
].sr_name
;
422 if ((val
& 0xff) == srev_names
[i
].sr_val
) {
423 name
= srev_names
[i
].sr_name
;
432 ath5k_pci_probe(struct pci_dev
*pdev
,
433 const struct pci_device_id
*id
)
436 struct ath5k_softc
*sc
;
437 struct ieee80211_hw
*hw
;
441 ret
= pci_enable_device(pdev
);
443 dev_err(&pdev
->dev
, "can't enable device\n");
447 /* XXX 32-bit addressing only */
448 ret
= pci_set_dma_mask(pdev
, DMA_32BIT_MASK
);
450 dev_err(&pdev
->dev
, "32-bit DMA not available\n");
455 * Cache line size is used to size and align various
456 * structures used to communicate with the hardware.
458 pci_read_config_byte(pdev
, PCI_CACHE_LINE_SIZE
, &csz
);
461 * Linux 2.4.18 (at least) writes the cache line size
462 * register as a 16-bit wide register which is wrong.
463 * We must have this setup properly for rx buffer
464 * DMA to work so force a reasonable value here if it
467 csz
= L1_CACHE_BYTES
/ sizeof(u32
);
468 pci_write_config_byte(pdev
, PCI_CACHE_LINE_SIZE
, csz
);
471 * The default setting of latency timer yields poor results,
472 * set it to the value used by other systems. It may be worth
473 * tweaking this setting more.
475 pci_write_config_byte(pdev
, PCI_LATENCY_TIMER
, 0xa8);
477 /* Enable bus mastering */
478 pci_set_master(pdev
);
481 * Disable the RETRY_TIMEOUT register (0x41) to keep
482 * PCI Tx retries from interfering with C3 CPU state.
484 pci_write_config_byte(pdev
, 0x41, 0);
486 ret
= pci_request_region(pdev
, 0, "ath5k");
488 dev_err(&pdev
->dev
, "cannot reserve PCI memory region\n");
492 mem
= pci_iomap(pdev
, 0, 0);
494 dev_err(&pdev
->dev
, "cannot remap PCI memory region\n") ;
500 * Allocate hw (mac80211 main struct)
501 * and hw->priv (driver private data)
503 hw
= ieee80211_alloc_hw(sizeof(*sc
), &ath5k_hw_ops
);
505 dev_err(&pdev
->dev
, "cannot allocate ieee80211_hw\n");
510 dev_info(&pdev
->dev
, "registered as '%s'\n", wiphy_name(hw
->wiphy
));
512 /* Initialize driver private data */
513 SET_IEEE80211_DEV(hw
, &pdev
->dev
);
514 hw
->flags
= IEEE80211_HW_RX_INCLUDES_FCS
|
515 IEEE80211_HW_SIGNAL_DBM
|
516 IEEE80211_HW_NOISE_DBM
;
518 hw
->wiphy
->interface_modes
=
519 BIT(NL80211_IFTYPE_STATION
) |
520 BIT(NL80211_IFTYPE_ADHOC
) |
521 BIT(NL80211_IFTYPE_MESH_POINT
);
523 hw
->extra_tx_headroom
= 2;
524 hw
->channel_change_time
= 5000;
529 ath5k_debug_init_device(sc
);
532 * Mark the device as detached to avoid processing
533 * interrupts until setup is complete.
535 __set_bit(ATH_STAT_INVALID
, sc
->status
);
537 sc
->iobase
= mem
; /* So we can unmap it on detach */
538 sc
->cachelsz
= csz
* sizeof(u32
); /* convert to bytes */
539 sc
->opmode
= NL80211_IFTYPE_STATION
;
540 mutex_init(&sc
->lock
);
541 spin_lock_init(&sc
->rxbuflock
);
542 spin_lock_init(&sc
->txbuflock
);
543 spin_lock_init(&sc
->block
);
545 /* Set private data */
546 pci_set_drvdata(pdev
, hw
);
548 /* Setup interrupt handler */
549 ret
= request_irq(pdev
->irq
, ath5k_intr
, IRQF_SHARED
, "ath", sc
);
551 ATH5K_ERR(sc
, "request_irq failed\n");
555 /* Initialize device */
556 sc
->ah
= ath5k_hw_attach(sc
, id
->driver_data
);
557 if (IS_ERR(sc
->ah
)) {
558 ret
= PTR_ERR(sc
->ah
);
562 /* set up multi-rate retry capabilities */
563 if (sc
->ah
->ah_version
== AR5K_AR5212
) {
565 hw
->max_rate_tries
= 11;
568 /* Finish private driver data initialization */
569 ret
= ath5k_attach(pdev
, hw
);
573 ATH5K_INFO(sc
, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
574 ath5k_chip_name(AR5K_VERSION_MAC
, sc
->ah
->ah_mac_srev
),
576 sc
->ah
->ah_phy_revision
);
578 if (!sc
->ah
->ah_single_chip
) {
579 /* Single chip radio (!RF5111) */
580 if (sc
->ah
->ah_radio_5ghz_revision
&&
581 !sc
->ah
->ah_radio_2ghz_revision
) {
582 /* No 5GHz support -> report 2GHz radio */
583 if (!test_bit(AR5K_MODE_11A
,
584 sc
->ah
->ah_capabilities
.cap_mode
)) {
585 ATH5K_INFO(sc
, "RF%s 2GHz radio found (0x%x)\n",
586 ath5k_chip_name(AR5K_VERSION_RAD
,
587 sc
->ah
->ah_radio_5ghz_revision
),
588 sc
->ah
->ah_radio_5ghz_revision
);
589 /* No 2GHz support (5110 and some
590 * 5Ghz only cards) -> report 5Ghz radio */
591 } else if (!test_bit(AR5K_MODE_11B
,
592 sc
->ah
->ah_capabilities
.cap_mode
)) {
593 ATH5K_INFO(sc
, "RF%s 5GHz radio found (0x%x)\n",
594 ath5k_chip_name(AR5K_VERSION_RAD
,
595 sc
->ah
->ah_radio_5ghz_revision
),
596 sc
->ah
->ah_radio_5ghz_revision
);
597 /* Multiband radio */
599 ATH5K_INFO(sc
, "RF%s multiband radio found"
601 ath5k_chip_name(AR5K_VERSION_RAD
,
602 sc
->ah
->ah_radio_5ghz_revision
),
603 sc
->ah
->ah_radio_5ghz_revision
);
606 /* Multi chip radio (RF5111 - RF2111) ->
607 * report both 2GHz/5GHz radios */
608 else if (sc
->ah
->ah_radio_5ghz_revision
&&
609 sc
->ah
->ah_radio_2ghz_revision
){
610 ATH5K_INFO(sc
, "RF%s 5GHz radio found (0x%x)\n",
611 ath5k_chip_name(AR5K_VERSION_RAD
,
612 sc
->ah
->ah_radio_5ghz_revision
),
613 sc
->ah
->ah_radio_5ghz_revision
);
614 ATH5K_INFO(sc
, "RF%s 2GHz radio found (0x%x)\n",
615 ath5k_chip_name(AR5K_VERSION_RAD
,
616 sc
->ah
->ah_radio_2ghz_revision
),
617 sc
->ah
->ah_radio_2ghz_revision
);
622 /* ready to process interrupts */
623 __clear_bit(ATH_STAT_INVALID
, sc
->status
);
627 ath5k_hw_detach(sc
->ah
);
629 free_irq(pdev
->irq
, sc
);
631 ieee80211_free_hw(hw
);
633 pci_iounmap(pdev
, mem
);
635 pci_release_region(pdev
, 0);
637 pci_disable_device(pdev
);
642 static void __devexit
643 ath5k_pci_remove(struct pci_dev
*pdev
)
645 struct ieee80211_hw
*hw
= pci_get_drvdata(pdev
);
646 struct ath5k_softc
*sc
= hw
->priv
;
648 ath5k_debug_finish_device(sc
);
649 ath5k_detach(pdev
, hw
);
650 ath5k_hw_detach(sc
->ah
);
651 free_irq(pdev
->irq
, sc
);
652 pci_iounmap(pdev
, sc
->iobase
);
653 pci_release_region(pdev
, 0);
654 pci_disable_device(pdev
);
655 ieee80211_free_hw(hw
);
660 ath5k_pci_suspend(struct pci_dev
*pdev
, pm_message_t state
)
662 struct ieee80211_hw
*hw
= pci_get_drvdata(pdev
);
663 struct ath5k_softc
*sc
= hw
->priv
;
667 free_irq(pdev
->irq
, sc
);
668 pci_save_state(pdev
);
669 pci_disable_device(pdev
);
670 pci_set_power_state(pdev
, PCI_D3hot
);
676 ath5k_pci_resume(struct pci_dev
*pdev
)
678 struct ieee80211_hw
*hw
= pci_get_drvdata(pdev
);
679 struct ath5k_softc
*sc
= hw
->priv
;
682 pci_restore_state(pdev
);
684 err
= pci_enable_device(pdev
);
688 err
= request_irq(pdev
->irq
, ath5k_intr
, IRQF_SHARED
, "ath", sc
);
690 ATH5K_ERR(sc
, "request_irq failed\n");
694 ath5k_led_enable(sc
);
698 pci_disable_device(pdev
);
701 #endif /* CONFIG_PM */
704 /***********************\
705 * Driver Initialization *
706 \***********************/
709 ath5k_attach(struct pci_dev
*pdev
, struct ieee80211_hw
*hw
)
711 struct ath5k_softc
*sc
= hw
->priv
;
712 struct ath5k_hw
*ah
= sc
->ah
;
713 u8 mac
[ETH_ALEN
] = {};
716 ATH5K_DBG(sc
, ATH5K_DEBUG_ANY
, "devid 0x%x\n", pdev
->device
);
719 * Check if the MAC has multi-rate retry support.
720 * We do this by trying to setup a fake extended
721 * descriptor. MAC's that don't have support will
722 * return false w/o doing anything. MAC's that do
723 * support it will return true w/o doing anything.
725 ret
= ah
->ah_setup_mrr_tx_desc(ah
, NULL
, 0, 0, 0, 0, 0, 0);
729 __set_bit(ATH_STAT_MRRETRY
, sc
->status
);
732 * Collect the channel list. The 802.11 layer
733 * is resposible for filtering this list based
734 * on settings like the phy mode and regulatory
735 * domain restrictions.
737 ret
= ath5k_setup_bands(hw
);
739 ATH5K_ERR(sc
, "can't get channels\n");
743 /* NB: setup here so ath5k_rate_update is happy */
744 if (test_bit(AR5K_MODE_11A
, ah
->ah_modes
))
745 ath5k_setcurmode(sc
, AR5K_MODE_11A
);
747 ath5k_setcurmode(sc
, AR5K_MODE_11B
);
750 * Allocate tx+rx descriptors and populate the lists.
752 ret
= ath5k_desc_alloc(sc
, pdev
);
754 ATH5K_ERR(sc
, "can't allocate descriptors\n");
759 * Allocate hardware transmit queues: one queue for
760 * beacon frames and one data queue for each QoS
761 * priority. Note that hw functions handle reseting
762 * these queues at the needed time.
764 ret
= ath5k_beaconq_setup(ah
);
766 ATH5K_ERR(sc
, "can't setup a beacon xmit queue\n");
771 sc
->txq
= ath5k_txq_setup(sc
, AR5K_TX_QUEUE_DATA
, AR5K_WME_AC_BK
);
772 if (IS_ERR(sc
->txq
)) {
773 ATH5K_ERR(sc
, "can't setup xmit queue\n");
774 ret
= PTR_ERR(sc
->txq
);
778 tasklet_init(&sc
->rxtq
, ath5k_tasklet_rx
, (unsigned long)sc
);
779 tasklet_init(&sc
->txtq
, ath5k_tasklet_tx
, (unsigned long)sc
);
780 tasklet_init(&sc
->restq
, ath5k_tasklet_reset
, (unsigned long)sc
);
781 tasklet_init(&sc
->beacontq
, ath5k_tasklet_beacon
, (unsigned long)sc
);
782 setup_timer(&sc
->calib_tim
, ath5k_calibrate
, (unsigned long)sc
);
784 ret
= ath5k_eeprom_read_mac(ah
, mac
);
786 ATH5K_ERR(sc
, "unable to read address from EEPROM: 0x%04x\n",
791 SET_IEEE80211_PERM_ADDR(hw
, mac
);
792 /* All MAC address bits matter for ACKs */
793 memset(sc
->bssidmask
, 0xff, ETH_ALEN
);
794 ath5k_hw_set_bssid_mask(sc
->ah
, sc
->bssidmask
);
796 ret
= ieee80211_register_hw(hw
);
798 ATH5K_ERR(sc
, "can't register ieee80211 hw\n");
806 ath5k_txq_release(sc
);
808 ath5k_hw_release_tx_queue(ah
, sc
->bhalq
);
810 ath5k_desc_free(sc
, pdev
);
816 ath5k_detach(struct pci_dev
*pdev
, struct ieee80211_hw
*hw
)
818 struct ath5k_softc
*sc
= hw
->priv
;
821 * NB: the order of these is important:
822 * o call the 802.11 layer before detaching ath5k_hw to
823 * insure callbacks into the driver to delete global
824 * key cache entries can be handled
825 * o reclaim the tx queue data structures after calling
826 * the 802.11 layer as we'll get called back to reclaim
827 * node state and potentially want to use them
828 * o to cleanup the tx queues the hal is called, so detach
830 * XXX: ??? detach ath5k_hw ???
831 * Other than that, it's straightforward...
833 ieee80211_unregister_hw(hw
);
834 ath5k_desc_free(sc
, pdev
);
835 ath5k_txq_release(sc
);
836 ath5k_hw_release_tx_queue(sc
->ah
, sc
->bhalq
);
837 ath5k_unregister_leds(sc
);
840 * NB: can't reclaim these until after ieee80211_ifdetach
841 * returns because we'll get called back to reclaim node
842 * state and potentially want to use them.
849 /********************\
850 * Channel/mode setup *
851 \********************/
854 * Convert IEEE channel number to MHz frequency.
857 ath5k_ieee2mhz(short chan
)
859 if (chan
<= 14 || chan
>= 27)
860 return ieee80211chan2mhz(chan
);
862 return 2212 + chan
* 20;
866 ath5k_copy_channels(struct ath5k_hw
*ah
,
867 struct ieee80211_channel
*channels
,
871 unsigned int i
, count
, size
, chfreq
, freq
, ch
;
873 if (!test_bit(mode
, ah
->ah_modes
))
878 case AR5K_MODE_11A_TURBO
:
879 /* 1..220, but 2GHz frequencies are filtered by check_channel */
881 chfreq
= CHANNEL_5GHZ
;
885 case AR5K_MODE_11G_TURBO
:
887 chfreq
= CHANNEL_2GHZ
;
890 ATH5K_WARN(ah
->ah_sc
, "bad mode, not copying channels\n");
894 for (i
= 0, count
= 0; i
< size
&& max
> 0; i
++) {
896 freq
= ath5k_ieee2mhz(ch
);
898 /* Check if channel is supported by the chipset */
899 if (!ath5k_channel_ok(ah
, freq
, chfreq
))
902 /* Write channel info and increment counter */
903 channels
[count
].center_freq
= freq
;
904 channels
[count
].band
= (chfreq
== CHANNEL_2GHZ
) ?
905 IEEE80211_BAND_2GHZ
: IEEE80211_BAND_5GHZ
;
909 channels
[count
].hw_value
= chfreq
| CHANNEL_OFDM
;
911 case AR5K_MODE_11A_TURBO
:
912 case AR5K_MODE_11G_TURBO
:
913 channels
[count
].hw_value
= chfreq
|
914 CHANNEL_OFDM
| CHANNEL_TURBO
;
917 channels
[count
].hw_value
= CHANNEL_B
;
928 ath5k_setup_rate_idx(struct ath5k_softc
*sc
, struct ieee80211_supported_band
*b
)
932 for (i
= 0; i
< AR5K_MAX_RATES
; i
++)
933 sc
->rate_idx
[b
->band
][i
] = -1;
935 for (i
= 0; i
< b
->n_bitrates
; i
++) {
936 sc
->rate_idx
[b
->band
][b
->bitrates
[i
].hw_value
] = i
;
937 if (b
->bitrates
[i
].hw_value_short
)
938 sc
->rate_idx
[b
->band
][b
->bitrates
[i
].hw_value_short
] = i
;
943 ath5k_setup_bands(struct ieee80211_hw
*hw
)
945 struct ath5k_softc
*sc
= hw
->priv
;
946 struct ath5k_hw
*ah
= sc
->ah
;
947 struct ieee80211_supported_band
*sband
;
948 int max_c
, count_c
= 0;
951 BUILD_BUG_ON(ARRAY_SIZE(sc
->sbands
) < IEEE80211_NUM_BANDS
);
952 max_c
= ARRAY_SIZE(sc
->channels
);
955 sband
= &sc
->sbands
[IEEE80211_BAND_2GHZ
];
956 sband
->band
= IEEE80211_BAND_2GHZ
;
957 sband
->bitrates
= &sc
->rates
[IEEE80211_BAND_2GHZ
][0];
959 if (test_bit(AR5K_MODE_11G
, sc
->ah
->ah_capabilities
.cap_mode
)) {
961 memcpy(sband
->bitrates
, &ath5k_rates
[0],
962 sizeof(struct ieee80211_rate
) * 12);
963 sband
->n_bitrates
= 12;
965 sband
->channels
= sc
->channels
;
966 sband
->n_channels
= ath5k_copy_channels(ah
, sband
->channels
,
967 AR5K_MODE_11G
, max_c
);
969 hw
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] = sband
;
970 count_c
= sband
->n_channels
;
972 } else if (test_bit(AR5K_MODE_11B
, sc
->ah
->ah_capabilities
.cap_mode
)) {
974 memcpy(sband
->bitrates
, &ath5k_rates
[0],
975 sizeof(struct ieee80211_rate
) * 4);
976 sband
->n_bitrates
= 4;
978 /* 5211 only supports B rates and uses 4bit rate codes
979 * (e.g normally we have 0x1B for 1M, but on 5211 we have 0x0B)
982 if (ah
->ah_version
== AR5K_AR5211
) {
983 for (i
= 0; i
< 4; i
++) {
984 sband
->bitrates
[i
].hw_value
=
985 sband
->bitrates
[i
].hw_value
& 0xF;
986 sband
->bitrates
[i
].hw_value_short
=
987 sband
->bitrates
[i
].hw_value_short
& 0xF;
991 sband
->channels
= sc
->channels
;
992 sband
->n_channels
= ath5k_copy_channels(ah
, sband
->channels
,
993 AR5K_MODE_11B
, max_c
);
995 hw
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] = sband
;
996 count_c
= sband
->n_channels
;
999 ath5k_setup_rate_idx(sc
, sband
);
1001 /* 5GHz band, A mode */
1002 if (test_bit(AR5K_MODE_11A
, sc
->ah
->ah_capabilities
.cap_mode
)) {
1003 sband
= &sc
->sbands
[IEEE80211_BAND_5GHZ
];
1004 sband
->band
= IEEE80211_BAND_5GHZ
;
1005 sband
->bitrates
= &sc
->rates
[IEEE80211_BAND_5GHZ
][0];
1007 memcpy(sband
->bitrates
, &ath5k_rates
[4],
1008 sizeof(struct ieee80211_rate
) * 8);
1009 sband
->n_bitrates
= 8;
1011 sband
->channels
= &sc
->channels
[count_c
];
1012 sband
->n_channels
= ath5k_copy_channels(ah
, sband
->channels
,
1013 AR5K_MODE_11A
, max_c
);
1015 hw
->wiphy
->bands
[IEEE80211_BAND_5GHZ
] = sband
;
1017 ath5k_setup_rate_idx(sc
, sband
);
1019 ath5k_debug_dump_bands(sc
);
1025 * Set/change channels. If the channel is really being changed,
1026 * it's done by reseting the chip. To accomplish this we must
1027 * first cleanup any pending DMA, then restart stuff after a la
1030 * Called with sc->lock.
1033 ath5k_chan_set(struct ath5k_softc
*sc
, struct ieee80211_channel
*chan
)
1035 ATH5K_DBG(sc
, ATH5K_DEBUG_RESET
, "(%u MHz) -> (%u MHz)\n",
1036 sc
->curchan
->center_freq
, chan
->center_freq
);
1038 if (chan
->center_freq
!= sc
->curchan
->center_freq
||
1039 chan
->hw_value
!= sc
->curchan
->hw_value
) {
1042 sc
->curband
= &sc
->sbands
[chan
->band
];
1045 * To switch channels clear any pending DMA operations;
1046 * wait long enough for the RX fifo to drain, reset the
1047 * hardware at the new frequency, and then re-enable
1048 * the relevant bits of the h/w.
1050 return ath5k_reset(sc
, true, true);
1057 ath5k_setcurmode(struct ath5k_softc
*sc
, unsigned int mode
)
1061 if (mode
== AR5K_MODE_11A
) {
1062 sc
->curband
= &sc
->sbands
[IEEE80211_BAND_5GHZ
];
1064 sc
->curband
= &sc
->sbands
[IEEE80211_BAND_2GHZ
];
1069 ath5k_mode_setup(struct ath5k_softc
*sc
)
1071 struct ath5k_hw
*ah
= sc
->ah
;
1074 /* configure rx filter */
1075 rfilt
= sc
->filter_flags
;
1076 ath5k_hw_set_rx_filter(ah
, rfilt
);
1078 if (ath5k_hw_hasbssidmask(ah
))
1079 ath5k_hw_set_bssid_mask(ah
, sc
->bssidmask
);
1081 /* configure operational mode */
1082 ath5k_hw_set_opmode(ah
);
1084 ath5k_hw_set_mcast_filter(ah
, 0, 0);
1085 ATH5K_DBG(sc
, ATH5K_DEBUG_MODE
, "RX filter 0x%x\n", rfilt
);
1089 ath5k_hw_to_driver_rix(struct ath5k_softc
*sc
, int hw_rix
)
1093 /* return base rate on errors */
1094 if (WARN(hw_rix
< 0 || hw_rix
>= AR5K_MAX_RATES
,
1095 "hw_rix out of bounds: %x\n", hw_rix
))
1098 rix
= sc
->rate_idx
[sc
->curband
->band
][hw_rix
];
1099 if (WARN(rix
< 0, "invalid hw_rix: %x\n", hw_rix
))
1110 struct sk_buff
*ath5k_rx_skb_alloc(struct ath5k_softc
*sc
, dma_addr_t
*skb_addr
)
1112 struct sk_buff
*skb
;
1116 * Allocate buffer with headroom_needed space for the
1117 * fake physical layer header at the start.
1119 skb
= dev_alloc_skb(sc
->rxbufsize
+ sc
->cachelsz
- 1);
1122 ATH5K_ERR(sc
, "can't alloc skbuff of size %u\n",
1123 sc
->rxbufsize
+ sc
->cachelsz
- 1);
1127 * Cache-line-align. This is important (for the
1128 * 5210 at least) as not doing so causes bogus data
1131 off
= ((unsigned long)skb
->data
) % sc
->cachelsz
;
1133 skb_reserve(skb
, sc
->cachelsz
- off
);
1135 *skb_addr
= pci_map_single(sc
->pdev
,
1136 skb
->data
, sc
->rxbufsize
, PCI_DMA_FROMDEVICE
);
1137 if (unlikely(pci_dma_mapping_error(sc
->pdev
, *skb_addr
))) {
1138 ATH5K_ERR(sc
, "%s: DMA mapping failed\n", __func__
);
1146 ath5k_rxbuf_setup(struct ath5k_softc
*sc
, struct ath5k_buf
*bf
)
1148 struct ath5k_hw
*ah
= sc
->ah
;
1149 struct sk_buff
*skb
= bf
->skb
;
1150 struct ath5k_desc
*ds
;
1153 skb
= ath5k_rx_skb_alloc(sc
, &bf
->skbaddr
);
1160 * Setup descriptors. For receive we always terminate
1161 * the descriptor list with a self-linked entry so we'll
1162 * not get overrun under high load (as can happen with a
1163 * 5212 when ANI processing enables PHY error frames).
1165 * To insure the last descriptor is self-linked we create
1166 * each descriptor as self-linked and add it to the end. As
1167 * each additional descriptor is added the previous self-linked
1168 * entry is ``fixed'' naturally. This should be safe even
1169 * if DMA is happening. When processing RX interrupts we
1170 * never remove/process the last, self-linked, entry on the
1171 * descriptor list. This insures the hardware always has
1172 * someplace to write a new frame.
1175 ds
->ds_link
= bf
->daddr
; /* link to self */
1176 ds
->ds_data
= bf
->skbaddr
;
1177 ah
->ah_setup_rx_desc(ah
, ds
,
1178 skb_tailroom(skb
), /* buffer size */
1181 if (sc
->rxlink
!= NULL
)
1182 *sc
->rxlink
= bf
->daddr
;
1183 sc
->rxlink
= &ds
->ds_link
;
1188 ath5k_txbuf_setup(struct ath5k_softc
*sc
, struct ath5k_buf
*bf
)
1190 struct ath5k_hw
*ah
= sc
->ah
;
1191 struct ath5k_txq
*txq
= sc
->txq
;
1192 struct ath5k_desc
*ds
= bf
->desc
;
1193 struct sk_buff
*skb
= bf
->skb
;
1194 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
1195 unsigned int pktlen
, flags
, keyidx
= AR5K_TXKEYIX_INVALID
;
1196 struct ieee80211_rate
*rate
;
1197 unsigned int mrr_rate
[3], mrr_tries
[3];
1204 flags
= AR5K_TXDESC_INTREQ
| AR5K_TXDESC_CLRDMASK
;
1206 /* XXX endianness */
1207 bf
->skbaddr
= pci_map_single(sc
->pdev
, skb
->data
, skb
->len
,
1210 rate
= ieee80211_get_tx_rate(sc
->hw
, info
);
1212 if (info
->flags
& IEEE80211_TX_CTL_NO_ACK
)
1213 flags
|= AR5K_TXDESC_NOACK
;
1215 rc_flags
= info
->control
.rates
[0].flags
;
1216 hw_rate
= (rc_flags
& IEEE80211_TX_RC_USE_SHORT_PREAMBLE
) ?
1217 rate
->hw_value_short
: rate
->hw_value
;
1221 /* FIXME: If we are in g mode and rate is a CCK rate
1222 * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
1223 * from tx power (value is in dB units already) */
1224 if (info
->control
.hw_key
) {
1225 keyidx
= info
->control
.hw_key
->hw_key_idx
;
1226 pktlen
+= info
->control
.hw_key
->icv_len
;
1228 if (rc_flags
& IEEE80211_TX_RC_USE_RTS_CTS
) {
1229 flags
|= AR5K_TXDESC_RTSENA
;
1230 cts_rate
= ieee80211_get_rts_cts_rate(sc
->hw
, info
)->hw_value
;
1231 duration
= le16_to_cpu(ieee80211_rts_duration(sc
->hw
,
1232 sc
->vif
, pktlen
, info
));
1234 if (rc_flags
& IEEE80211_TX_RC_USE_CTS_PROTECT
) {
1235 flags
|= AR5K_TXDESC_CTSENA
;
1236 cts_rate
= ieee80211_get_rts_cts_rate(sc
->hw
, info
)->hw_value
;
1237 duration
= le16_to_cpu(ieee80211_ctstoself_duration(sc
->hw
,
1238 sc
->vif
, pktlen
, info
));
1240 ret
= ah
->ah_setup_tx_desc(ah
, ds
, pktlen
,
1241 ieee80211_get_hdrlen_from_skb(skb
), AR5K_PKT_TYPE_NORMAL
,
1242 (sc
->power_level
* 2),
1244 info
->control
.rates
[0].count
, keyidx
, 0, flags
,
1245 cts_rate
, duration
);
1249 memset(mrr_rate
, 0, sizeof(mrr_rate
));
1250 memset(mrr_tries
, 0, sizeof(mrr_tries
));
1251 for (i
= 0; i
< 3; i
++) {
1252 rate
= ieee80211_get_alt_retry_rate(sc
->hw
, info
, i
);
1256 mrr_rate
[i
] = rate
->hw_value
;
1257 mrr_tries
[i
] = info
->control
.rates
[i
+ 1].count
;
1260 ah
->ah_setup_mrr_tx_desc(ah
, ds
,
1261 mrr_rate
[0], mrr_tries
[0],
1262 mrr_rate
[1], mrr_tries
[1],
1263 mrr_rate
[2], mrr_tries
[2]);
1266 ds
->ds_data
= bf
->skbaddr
;
1268 spin_lock_bh(&txq
->lock
);
1269 list_add_tail(&bf
->list
, &txq
->q
);
1270 sc
->tx_stats
[txq
->qnum
].len
++;
1271 if (txq
->link
== NULL
) /* is this first packet? */
1272 ath5k_hw_set_txdp(ah
, txq
->qnum
, bf
->daddr
);
1273 else /* no, so only link it */
1274 *txq
->link
= bf
->daddr
;
1276 txq
->link
= &ds
->ds_link
;
1277 ath5k_hw_start_tx_dma(ah
, txq
->qnum
);
1279 spin_unlock_bh(&txq
->lock
);
1283 pci_unmap_single(sc
->pdev
, bf
->skbaddr
, skb
->len
, PCI_DMA_TODEVICE
);
1287 /*******************\
1288 * Descriptors setup *
1289 \*******************/
1292 ath5k_desc_alloc(struct ath5k_softc
*sc
, struct pci_dev
*pdev
)
1294 struct ath5k_desc
*ds
;
1295 struct ath5k_buf
*bf
;
1300 /* allocate descriptors */
1301 sc
->desc_len
= sizeof(struct ath5k_desc
) *
1302 (ATH_TXBUF
+ ATH_RXBUF
+ ATH_BCBUF
+ 1);
1303 sc
->desc
= pci_alloc_consistent(pdev
, sc
->desc_len
, &sc
->desc_daddr
);
1304 if (sc
->desc
== NULL
) {
1305 ATH5K_ERR(sc
, "can't allocate descriptors\n");
1310 da
= sc
->desc_daddr
;
1311 ATH5K_DBG(sc
, ATH5K_DEBUG_ANY
, "DMA map: %p (%zu) -> %llx\n",
1312 ds
, sc
->desc_len
, (unsigned long long)sc
->desc_daddr
);
1314 bf
= kcalloc(1 + ATH_TXBUF
+ ATH_RXBUF
+ ATH_BCBUF
,
1315 sizeof(struct ath5k_buf
), GFP_KERNEL
);
1317 ATH5K_ERR(sc
, "can't allocate bufptr\n");
1323 INIT_LIST_HEAD(&sc
->rxbuf
);
1324 for (i
= 0; i
< ATH_RXBUF
; i
++, bf
++, ds
++, da
+= sizeof(*ds
)) {
1327 list_add_tail(&bf
->list
, &sc
->rxbuf
);
1330 INIT_LIST_HEAD(&sc
->txbuf
);
1331 sc
->txbuf_len
= ATH_TXBUF
;
1332 for (i
= 0; i
< ATH_TXBUF
; i
++, bf
++, ds
++,
1333 da
+= sizeof(*ds
)) {
1336 list_add_tail(&bf
->list
, &sc
->txbuf
);
1346 pci_free_consistent(pdev
, sc
->desc_len
, sc
->desc
, sc
->desc_daddr
);
1353 ath5k_desc_free(struct ath5k_softc
*sc
, struct pci_dev
*pdev
)
1355 struct ath5k_buf
*bf
;
1357 ath5k_txbuf_free(sc
, sc
->bbuf
);
1358 list_for_each_entry(bf
, &sc
->txbuf
, list
)
1359 ath5k_txbuf_free(sc
, bf
);
1360 list_for_each_entry(bf
, &sc
->rxbuf
, list
)
1361 ath5k_rxbuf_free(sc
, bf
);
1363 /* Free memory associated with all descriptors */
1364 pci_free_consistent(pdev
, sc
->desc_len
, sc
->desc
, sc
->desc_daddr
);
1378 static struct ath5k_txq
*
1379 ath5k_txq_setup(struct ath5k_softc
*sc
,
1380 int qtype
, int subtype
)
1382 struct ath5k_hw
*ah
= sc
->ah
;
1383 struct ath5k_txq
*txq
;
1384 struct ath5k_txq_info qi
= {
1385 .tqi_subtype
= subtype
,
1386 .tqi_aifs
= AR5K_TXQ_USEDEFAULT
,
1387 .tqi_cw_min
= AR5K_TXQ_USEDEFAULT
,
1388 .tqi_cw_max
= AR5K_TXQ_USEDEFAULT
1393 * Enable interrupts only for EOL and DESC conditions.
1394 * We mark tx descriptors to receive a DESC interrupt
1395 * when a tx queue gets deep; otherwise waiting for the
1396 * EOL to reap descriptors. Note that this is done to
1397 * reduce interrupt load and this only defers reaping
1398 * descriptors, never transmitting frames. Aside from
1399 * reducing interrupts this also permits more concurrency.
1400 * The only potential downside is if the tx queue backs
1401 * up in which case the top half of the kernel may backup
1402 * due to a lack of tx descriptors.
1404 qi
.tqi_flags
= AR5K_TXQ_FLAG_TXEOLINT_ENABLE
|
1405 AR5K_TXQ_FLAG_TXDESCINT_ENABLE
;
1406 qnum
= ath5k_hw_setup_tx_queue(ah
, qtype
, &qi
);
1409 * NB: don't print a message, this happens
1410 * normally on parts with too few tx queues
1412 return ERR_PTR(qnum
);
1414 if (qnum
>= ARRAY_SIZE(sc
->txqs
)) {
1415 ATH5K_ERR(sc
, "hw qnum %u out of range, max %tu!\n",
1416 qnum
, ARRAY_SIZE(sc
->txqs
));
1417 ath5k_hw_release_tx_queue(ah
, qnum
);
1418 return ERR_PTR(-EINVAL
);
1420 txq
= &sc
->txqs
[qnum
];
1424 INIT_LIST_HEAD(&txq
->q
);
1425 spin_lock_init(&txq
->lock
);
1428 return &sc
->txqs
[qnum
];
1432 ath5k_beaconq_setup(struct ath5k_hw
*ah
)
1434 struct ath5k_txq_info qi
= {
1435 .tqi_aifs
= AR5K_TXQ_USEDEFAULT
,
1436 .tqi_cw_min
= AR5K_TXQ_USEDEFAULT
,
1437 .tqi_cw_max
= AR5K_TXQ_USEDEFAULT
,
1438 /* NB: for dynamic turbo, don't enable any other interrupts */
1439 .tqi_flags
= AR5K_TXQ_FLAG_TXDESCINT_ENABLE
1442 return ath5k_hw_setup_tx_queue(ah
, AR5K_TX_QUEUE_BEACON
, &qi
);
1446 ath5k_beaconq_config(struct ath5k_softc
*sc
)
1448 struct ath5k_hw
*ah
= sc
->ah
;
1449 struct ath5k_txq_info qi
;
1452 ret
= ath5k_hw_get_tx_queueprops(ah
, sc
->bhalq
, &qi
);
1455 if (sc
->opmode
== NL80211_IFTYPE_AP
||
1456 sc
->opmode
== NL80211_IFTYPE_MESH_POINT
) {
1458 * Always burst out beacon and CAB traffic
1459 * (aifs = cwmin = cwmax = 0)
1464 } else if (sc
->opmode
== NL80211_IFTYPE_ADHOC
) {
1466 * Adhoc mode; backoff between 0 and (2 * cw_min).
1470 qi
.tqi_cw_max
= 2 * ah
->ah_cw_min
;
1473 ATH5K_DBG(sc
, ATH5K_DEBUG_BEACON
,
1474 "beacon queueprops tqi_aifs:%d tqi_cw_min:%d tqi_cw_max:%d\n",
1475 qi
.tqi_aifs
, qi
.tqi_cw_min
, qi
.tqi_cw_max
);
1477 ret
= ath5k_hw_set_tx_queueprops(ah
, sc
->bhalq
, &qi
);
1479 ATH5K_ERR(sc
, "%s: unable to update parameters for beacon "
1480 "hardware queue!\n", __func__
);
1484 return ath5k_hw_reset_tx_queue(ah
, sc
->bhalq
); /* push to h/w */;
1488 ath5k_txq_drainq(struct ath5k_softc
*sc
, struct ath5k_txq
*txq
)
1490 struct ath5k_buf
*bf
, *bf0
;
1493 * NB: this assumes output has been stopped and
1494 * we do not need to block ath5k_tx_tasklet
1496 spin_lock_bh(&txq
->lock
);
1497 list_for_each_entry_safe(bf
, bf0
, &txq
->q
, list
) {
1498 ath5k_debug_printtxbuf(sc
, bf
);
1500 ath5k_txbuf_free(sc
, bf
);
1502 spin_lock_bh(&sc
->txbuflock
);
1503 sc
->tx_stats
[txq
->qnum
].len
--;
1504 list_move_tail(&bf
->list
, &sc
->txbuf
);
1506 spin_unlock_bh(&sc
->txbuflock
);
1509 spin_unlock_bh(&txq
->lock
);
1513 * Drain the transmit queues and reclaim resources.
1516 ath5k_txq_cleanup(struct ath5k_softc
*sc
)
1518 struct ath5k_hw
*ah
= sc
->ah
;
1521 /* XXX return value */
1522 if (likely(!test_bit(ATH_STAT_INVALID
, sc
->status
))) {
1523 /* don't touch the hardware if marked invalid */
1524 ath5k_hw_stop_tx_dma(ah
, sc
->bhalq
);
1525 ATH5K_DBG(sc
, ATH5K_DEBUG_RESET
, "beacon queue %x\n",
1526 ath5k_hw_get_txdp(ah
, sc
->bhalq
));
1527 for (i
= 0; i
< ARRAY_SIZE(sc
->txqs
); i
++)
1528 if (sc
->txqs
[i
].setup
) {
1529 ath5k_hw_stop_tx_dma(ah
, sc
->txqs
[i
].qnum
);
1530 ATH5K_DBG(sc
, ATH5K_DEBUG_RESET
, "txq [%u] %x, "
1533 ath5k_hw_get_txdp(ah
,
1538 ieee80211_wake_queues(sc
->hw
); /* XXX move to callers */
1540 for (i
= 0; i
< ARRAY_SIZE(sc
->txqs
); i
++)
1541 if (sc
->txqs
[i
].setup
)
1542 ath5k_txq_drainq(sc
, &sc
->txqs
[i
]);
1546 ath5k_txq_release(struct ath5k_softc
*sc
)
1548 struct ath5k_txq
*txq
= sc
->txqs
;
1551 for (i
= 0; i
< ARRAY_SIZE(sc
->txqs
); i
++, txq
++)
1553 ath5k_hw_release_tx_queue(sc
->ah
, txq
->qnum
);
1566 * Enable the receive h/w following a reset.
1569 ath5k_rx_start(struct ath5k_softc
*sc
)
1571 struct ath5k_hw
*ah
= sc
->ah
;
1572 struct ath5k_buf
*bf
;
1575 sc
->rxbufsize
= roundup(IEEE80211_MAX_LEN
, sc
->cachelsz
);
1577 ATH5K_DBG(sc
, ATH5K_DEBUG_RESET
, "cachelsz %u rxbufsize %u\n",
1578 sc
->cachelsz
, sc
->rxbufsize
);
1582 spin_lock_bh(&sc
->rxbuflock
);
1583 list_for_each_entry(bf
, &sc
->rxbuf
, list
) {
1584 ret
= ath5k_rxbuf_setup(sc
, bf
);
1586 spin_unlock_bh(&sc
->rxbuflock
);
1590 bf
= list_first_entry(&sc
->rxbuf
, struct ath5k_buf
, list
);
1591 spin_unlock_bh(&sc
->rxbuflock
);
1593 ath5k_hw_set_rxdp(ah
, bf
->daddr
);
1594 ath5k_hw_start_rx_dma(ah
); /* enable recv descriptors */
1595 ath5k_mode_setup(sc
); /* set filters, etc. */
1596 ath5k_hw_start_rx_pcu(ah
); /* re-enable PCU/DMA engine */
1604 * Disable the receive h/w in preparation for a reset.
1607 ath5k_rx_stop(struct ath5k_softc
*sc
)
1609 struct ath5k_hw
*ah
= sc
->ah
;
1611 ath5k_hw_stop_rx_pcu(ah
); /* disable PCU */
1612 ath5k_hw_set_rx_filter(ah
, 0); /* clear recv filter */
1613 ath5k_hw_stop_rx_dma(ah
); /* disable DMA engine */
1615 ath5k_debug_printrxbuffs(sc
, ah
);
1617 sc
->rxlink
= NULL
; /* just in case */
1621 ath5k_rx_decrypted(struct ath5k_softc
*sc
, struct ath5k_desc
*ds
,
1622 struct sk_buff
*skb
, struct ath5k_rx_status
*rs
)
1624 struct ieee80211_hdr
*hdr
= (void *)skb
->data
;
1625 unsigned int keyix
, hlen
;
1627 if (!(rs
->rs_status
& AR5K_RXERR_DECRYPT
) &&
1628 rs
->rs_keyix
!= AR5K_RXKEYIX_INVALID
)
1629 return RX_FLAG_DECRYPTED
;
1631 /* Apparently when a default key is used to decrypt the packet
1632 the hw does not set the index used to decrypt. In such cases
1633 get the index from the packet. */
1634 hlen
= ieee80211_hdrlen(hdr
->frame_control
);
1635 if (ieee80211_has_protected(hdr
->frame_control
) &&
1636 !(rs
->rs_status
& AR5K_RXERR_DECRYPT
) &&
1637 skb
->len
>= hlen
+ 4) {
1638 keyix
= skb
->data
[hlen
+ 3] >> 6;
1640 if (test_bit(keyix
, sc
->keymap
))
1641 return RX_FLAG_DECRYPTED
;
1649 ath5k_check_ibss_tsf(struct ath5k_softc
*sc
, struct sk_buff
*skb
,
1650 struct ieee80211_rx_status
*rxs
)
1654 struct ieee80211_mgmt
*mgmt
= (struct ieee80211_mgmt
*)skb
->data
;
1656 if (ieee80211_is_beacon(mgmt
->frame_control
) &&
1657 le16_to_cpu(mgmt
->u
.beacon
.capab_info
) & WLAN_CAPABILITY_IBSS
&&
1658 memcmp(mgmt
->bssid
, sc
->ah
->ah_bssid
, ETH_ALEN
) == 0) {
1660 * Received an IBSS beacon with the same BSSID. Hardware *must*
1661 * have updated the local TSF. We have to work around various
1662 * hardware bugs, though...
1664 tsf
= ath5k_hw_get_tsf64(sc
->ah
);
1665 bc_tstamp
= le64_to_cpu(mgmt
->u
.beacon
.timestamp
);
1666 hw_tu
= TSF_TO_TU(tsf
);
1668 ATH5K_DBG_UNLIMIT(sc
, ATH5K_DEBUG_BEACON
,
1669 "beacon %llx mactime %llx (diff %lld) tsf now %llx\n",
1670 (unsigned long long)bc_tstamp
,
1671 (unsigned long long)rxs
->mactime
,
1672 (unsigned long long)(rxs
->mactime
- bc_tstamp
),
1673 (unsigned long long)tsf
);
1676 * Sometimes the HW will give us a wrong tstamp in the rx
1677 * status, causing the timestamp extension to go wrong.
1678 * (This seems to happen especially with beacon frames bigger
1679 * than 78 byte (incl. FCS))
1680 * But we know that the receive timestamp must be later than the
1681 * timestamp of the beacon since HW must have synced to that.
1683 * NOTE: here we assume mactime to be after the frame was
1684 * received, not like mac80211 which defines it at the start.
1686 if (bc_tstamp
> rxs
->mactime
) {
1687 ATH5K_DBG_UNLIMIT(sc
, ATH5K_DEBUG_BEACON
,
1688 "fixing mactime from %llx to %llx\n",
1689 (unsigned long long)rxs
->mactime
,
1690 (unsigned long long)tsf
);
1695 * Local TSF might have moved higher than our beacon timers,
1696 * in that case we have to update them to continue sending
1697 * beacons. This also takes care of synchronizing beacon sending
1698 * times with other stations.
1700 if (hw_tu
>= sc
->nexttbtt
)
1701 ath5k_beacon_update_timers(sc
, bc_tstamp
);
1705 static void ath5k_tasklet_beacon(unsigned long data
)
1707 struct ath5k_softc
*sc
= (struct ath5k_softc
*) data
;
1710 * Software beacon alert--time to send a beacon.
1712 * In IBSS mode we use this interrupt just to
1713 * keep track of the next TBTT (target beacon
1714 * transmission time) in order to detect wether
1715 * automatic TSF updates happened.
1717 if (sc
->opmode
== NL80211_IFTYPE_ADHOC
) {
1718 /* XXX: only if VEOL suppported */
1719 u64 tsf
= ath5k_hw_get_tsf64(sc
->ah
);
1720 sc
->nexttbtt
+= sc
->bintval
;
1721 ATH5K_DBG(sc
, ATH5K_DEBUG_BEACON
,
1722 "SWBA nexttbtt: %x hw_tu: %x "
1726 (unsigned long long) tsf
);
1728 spin_lock(&sc
->block
);
1729 ath5k_beacon_send(sc
);
1730 spin_unlock(&sc
->block
);
1735 ath5k_tasklet_rx(unsigned long data
)
1737 struct ieee80211_rx_status rxs
= {};
1738 struct ath5k_rx_status rs
= {};
1739 struct sk_buff
*skb
, *next_skb
;
1740 dma_addr_t next_skb_addr
;
1741 struct ath5k_softc
*sc
= (void *)data
;
1742 struct ath5k_buf
*bf
, *bf_last
;
1743 struct ath5k_desc
*ds
;
1748 spin_lock(&sc
->rxbuflock
);
1749 if (list_empty(&sc
->rxbuf
)) {
1750 ATH5K_WARN(sc
, "empty rx buf pool\n");
1753 bf_last
= list_entry(sc
->rxbuf
.prev
, struct ath5k_buf
, list
);
1757 bf
= list_first_entry(&sc
->rxbuf
, struct ath5k_buf
, list
);
1758 BUG_ON(bf
->skb
== NULL
);
1763 * last buffer must not be freed to ensure proper hardware
1764 * function. When the hardware finishes also a packet next to
1765 * it, we are sure, it doesn't use it anymore and we can go on.
1770 struct ath5k_buf
*bf_next
= list_entry(bf
->list
.next
,
1771 struct ath5k_buf
, list
);
1772 ret
= sc
->ah
->ah_proc_rx_desc(sc
->ah
, bf_next
->desc
,
1777 /* skip the overwritten one (even status is martian) */
1781 ret
= sc
->ah
->ah_proc_rx_desc(sc
->ah
, ds
, &rs
);
1782 if (unlikely(ret
== -EINPROGRESS
))
1784 else if (unlikely(ret
)) {
1785 ATH5K_ERR(sc
, "error in processing rx descriptor\n");
1786 spin_unlock(&sc
->rxbuflock
);
1790 if (unlikely(rs
.rs_more
)) {
1791 ATH5K_WARN(sc
, "unsupported jumbo\n");
1795 if (unlikely(rs
.rs_status
)) {
1796 if (rs
.rs_status
& AR5K_RXERR_PHY
)
1798 if (rs
.rs_status
& AR5K_RXERR_DECRYPT
) {
1800 * Decrypt error. If the error occurred
1801 * because there was no hardware key, then
1802 * let the frame through so the upper layers
1803 * can process it. This is necessary for 5210
1804 * parts which have no way to setup a ``clear''
1807 * XXX do key cache faulting
1809 if (rs
.rs_keyix
== AR5K_RXKEYIX_INVALID
&&
1810 !(rs
.rs_status
& AR5K_RXERR_CRC
))
1813 if (rs
.rs_status
& AR5K_RXERR_MIC
) {
1814 rxs
.flag
|= RX_FLAG_MMIC_ERROR
;
1818 /* let crypto-error packets fall through in MNTR */
1820 ~(AR5K_RXERR_DECRYPT
|AR5K_RXERR_MIC
)) ||
1821 sc
->opmode
!= NL80211_IFTYPE_MONITOR
)
1825 next_skb
= ath5k_rx_skb_alloc(sc
, &next_skb_addr
);
1828 * If we can't replace bf->skb with a new skb under memory
1829 * pressure, just skip this packet
1834 pci_unmap_single(sc
->pdev
, bf
->skbaddr
, sc
->rxbufsize
,
1835 PCI_DMA_FROMDEVICE
);
1836 skb_put(skb
, rs
.rs_datalen
);
1838 /* The MAC header is padded to have 32-bit boundary if the
1839 * packet payload is non-zero. The general calculation for
1840 * padsize would take into account odd header lengths:
1841 * padsize = (4 - hdrlen % 4) % 4; However, since only
1842 * even-length headers are used, padding can only be 0 or 2
1843 * bytes and we can optimize this a bit. In addition, we must
1844 * not try to remove padding from short control frames that do
1845 * not have payload. */
1846 hdrlen
= ieee80211_get_hdrlen_from_skb(skb
);
1847 padsize
= ath5k_pad_size(hdrlen
);
1849 memmove(skb
->data
+ padsize
, skb
->data
, hdrlen
);
1850 skb_pull(skb
, padsize
);
1854 * always extend the mac timestamp, since this information is
1855 * also needed for proper IBSS merging.
1857 * XXX: it might be too late to do it here, since rs_tstamp is
1858 * 15bit only. that means TSF extension has to be done within
1859 * 32768usec (about 32ms). it might be necessary to move this to
1860 * the interrupt handler, like it is done in madwifi.
1862 * Unfortunately we don't know when the hardware takes the rx
1863 * timestamp (beginning of phy frame, data frame, end of rx?).
1864 * The only thing we know is that it is hardware specific...
1865 * On AR5213 it seems the rx timestamp is at the end of the
1866 * frame, but i'm not sure.
1868 * NOTE: mac80211 defines mactime at the beginning of the first
1869 * data symbol. Since we don't have any time references it's
1870 * impossible to comply to that. This affects IBSS merge only
1871 * right now, so it's not too bad...
1873 rxs
.mactime
= ath5k_extend_tsf(sc
->ah
, rs
.rs_tstamp
);
1874 rxs
.flag
|= RX_FLAG_TSFT
;
1876 rxs
.freq
= sc
->curchan
->center_freq
;
1877 rxs
.band
= sc
->curband
->band
;
1879 rxs
.noise
= sc
->ah
->ah_noise_floor
;
1880 rxs
.signal
= rxs
.noise
+ rs
.rs_rssi
;
1882 /* An rssi of 35 indicates you should be able use
1883 * 54 Mbps reliably. A more elaborate scheme can be used
1884 * here but it requires a map of SNR/throughput for each
1885 * possible mode used */
1886 rxs
.qual
= rs
.rs_rssi
* 100 / 35;
1888 /* rssi can be more than 35 though, anything above that
1889 * should be considered at 100% */
1893 rxs
.antenna
= rs
.rs_antenna
;
1894 rxs
.rate_idx
= ath5k_hw_to_driver_rix(sc
, rs
.rs_rate
);
1895 rxs
.flag
|= ath5k_rx_decrypted(sc
, ds
, skb
, &rs
);
1897 if (rxs
.rate_idx
>= 0 && rs
.rs_rate
==
1898 sc
->curband
->bitrates
[rxs
.rate_idx
].hw_value_short
)
1899 rxs
.flag
|= RX_FLAG_SHORTPRE
;
1901 ath5k_debug_dump_skb(sc
, skb
, "RX ", 0);
1903 /* check beacons in IBSS mode */
1904 if (sc
->opmode
== NL80211_IFTYPE_ADHOC
)
1905 ath5k_check_ibss_tsf(sc
, skb
, &rxs
);
1907 __ieee80211_rx(sc
->hw
, skb
, &rxs
);
1910 bf
->skbaddr
= next_skb_addr
;
1912 list_move_tail(&bf
->list
, &sc
->rxbuf
);
1913 } while (ath5k_rxbuf_setup(sc
, bf
) == 0);
1915 spin_unlock(&sc
->rxbuflock
);
1926 ath5k_tx_processq(struct ath5k_softc
*sc
, struct ath5k_txq
*txq
)
1928 struct ath5k_tx_status ts
= {};
1929 struct ath5k_buf
*bf
, *bf0
;
1930 struct ath5k_desc
*ds
;
1931 struct sk_buff
*skb
;
1932 struct ieee80211_tx_info
*info
;
1935 spin_lock(&txq
->lock
);
1936 list_for_each_entry_safe(bf
, bf0
, &txq
->q
, list
) {
1939 ret
= sc
->ah
->ah_proc_tx_desc(sc
->ah
, ds
, &ts
);
1940 if (unlikely(ret
== -EINPROGRESS
))
1942 else if (unlikely(ret
)) {
1943 ATH5K_ERR(sc
, "error %d while processing queue %u\n",
1949 info
= IEEE80211_SKB_CB(skb
);
1952 pci_unmap_single(sc
->pdev
, bf
->skbaddr
, skb
->len
,
1955 ieee80211_tx_info_clear_status(info
);
1956 for (i
= 0; i
< 4; i
++) {
1957 struct ieee80211_tx_rate
*r
=
1958 &info
->status
.rates
[i
];
1960 if (ts
.ts_rate
[i
]) {
1961 r
->idx
= ath5k_hw_to_driver_rix(sc
, ts
.ts_rate
[i
]);
1962 r
->count
= ts
.ts_retry
[i
];
1969 /* count the successful attempt as well */
1970 info
->status
.rates
[ts
.ts_final_idx
].count
++;
1972 if (unlikely(ts
.ts_status
)) {
1973 sc
->ll_stats
.dot11ACKFailureCount
++;
1974 if (ts
.ts_status
& AR5K_TXERR_FILT
)
1975 info
->flags
|= IEEE80211_TX_STAT_TX_FILTERED
;
1977 info
->flags
|= IEEE80211_TX_STAT_ACK
;
1978 info
->status
.ack_signal
= ts
.ts_rssi
;
1981 ieee80211_tx_status(sc
->hw
, skb
);
1982 sc
->tx_stats
[txq
->qnum
].count
++;
1984 spin_lock(&sc
->txbuflock
);
1985 sc
->tx_stats
[txq
->qnum
].len
--;
1986 list_move_tail(&bf
->list
, &sc
->txbuf
);
1988 spin_unlock(&sc
->txbuflock
);
1990 if (likely(list_empty(&txq
->q
)))
1992 spin_unlock(&txq
->lock
);
1993 if (sc
->txbuf_len
> ATH_TXBUF
/ 5)
1994 ieee80211_wake_queues(sc
->hw
);
1998 ath5k_tasklet_tx(unsigned long data
)
2000 struct ath5k_softc
*sc
= (void *)data
;
2002 ath5k_tx_processq(sc
, sc
->txq
);
2011 * Setup the beacon frame for transmit.
2014 ath5k_beacon_setup(struct ath5k_softc
*sc
, struct ath5k_buf
*bf
)
2016 struct sk_buff
*skb
= bf
->skb
;
2017 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
2018 struct ath5k_hw
*ah
= sc
->ah
;
2019 struct ath5k_desc
*ds
;
2020 int ret
, antenna
= 0;
2023 bf
->skbaddr
= pci_map_single(sc
->pdev
, skb
->data
, skb
->len
,
2025 ATH5K_DBG(sc
, ATH5K_DEBUG_BEACON
, "skb %p [data %p len %u] "
2026 "skbaddr %llx\n", skb
, skb
->data
, skb
->len
,
2027 (unsigned long long)bf
->skbaddr
);
2028 if (pci_dma_mapping_error(sc
->pdev
, bf
->skbaddr
)) {
2029 ATH5K_ERR(sc
, "beacon DMA mapping failed\n");
2035 flags
= AR5K_TXDESC_NOACK
;
2036 if (sc
->opmode
== NL80211_IFTYPE_ADHOC
&& ath5k_hw_hasveol(ah
)) {
2037 ds
->ds_link
= bf
->daddr
; /* self-linked */
2038 flags
|= AR5K_TXDESC_VEOL
;
2040 * Let hardware handle antenna switching if txantenna is not set
2045 * Switch antenna every 4 beacons if txantenna is not set
2046 * XXX assumes two antennas
2049 antenna
= sc
->bsent
& 4 ? 2 : 1;
2052 /* FIXME: If we are in g mode and rate is a CCK rate
2053 * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
2054 * from tx power (value is in dB units already) */
2055 ds
->ds_data
= bf
->skbaddr
;
2056 ret
= ah
->ah_setup_tx_desc(ah
, ds
, skb
->len
,
2057 ieee80211_get_hdrlen_from_skb(skb
),
2058 AR5K_PKT_TYPE_BEACON
, (sc
->power_level
* 2),
2059 ieee80211_get_tx_rate(sc
->hw
, info
)->hw_value
,
2060 1, AR5K_TXKEYIX_INVALID
,
2061 antenna
, flags
, 0, 0);
2067 pci_unmap_single(sc
->pdev
, bf
->skbaddr
, skb
->len
, PCI_DMA_TODEVICE
);
2072 * Transmit a beacon frame at SWBA. Dynamic updates to the
2073 * frame contents are done as needed and the slot time is
2074 * also adjusted based on current state.
2076 * This is called from software irq context (beacontq or restq
2077 * tasklets) or user context from ath5k_beacon_config.
2080 ath5k_beacon_send(struct ath5k_softc
*sc
)
2082 struct ath5k_buf
*bf
= sc
->bbuf
;
2083 struct ath5k_hw
*ah
= sc
->ah
;
2085 ATH5K_DBG_UNLIMIT(sc
, ATH5K_DEBUG_BEACON
, "in beacon_send\n");
2087 if (unlikely(bf
->skb
== NULL
|| sc
->opmode
== NL80211_IFTYPE_STATION
||
2088 sc
->opmode
== NL80211_IFTYPE_MONITOR
)) {
2089 ATH5K_WARN(sc
, "bf=%p bf_skb=%p\n", bf
, bf
? bf
->skb
: NULL
);
2093 * Check if the previous beacon has gone out. If
2094 * not don't don't try to post another, skip this
2095 * period and wait for the next. Missed beacons
2096 * indicate a problem and should not occur. If we
2097 * miss too many consecutive beacons reset the device.
2099 if (unlikely(ath5k_hw_num_tx_pending(ah
, sc
->bhalq
) != 0)) {
2101 ATH5K_DBG(sc
, ATH5K_DEBUG_BEACON
,
2102 "missed %u consecutive beacons\n", sc
->bmisscount
);
2103 if (sc
->bmisscount
> 3) { /* NB: 3 is a guess */
2104 ATH5K_DBG(sc
, ATH5K_DEBUG_BEACON
,
2105 "stuck beacon time (%u missed)\n",
2107 tasklet_schedule(&sc
->restq
);
2111 if (unlikely(sc
->bmisscount
!= 0)) {
2112 ATH5K_DBG(sc
, ATH5K_DEBUG_BEACON
,
2113 "resume beacon xmit after %u misses\n",
2119 * Stop any current dma and put the new frame on the queue.
2120 * This should never fail since we check above that no frames
2121 * are still pending on the queue.
2123 if (unlikely(ath5k_hw_stop_tx_dma(ah
, sc
->bhalq
))) {
2124 ATH5K_WARN(sc
, "beacon queue %u didn't stop?\n", sc
->bhalq
);
2125 /* NB: hw still stops DMA, so proceed */
2128 ath5k_hw_set_txdp(ah
, sc
->bhalq
, bf
->daddr
);
2129 ath5k_hw_start_tx_dma(ah
, sc
->bhalq
);
2130 ATH5K_DBG(sc
, ATH5K_DEBUG_BEACON
, "TXDP[%u] = %llx (%p)\n",
2131 sc
->bhalq
, (unsigned long long)bf
->daddr
, bf
->desc
);
2138 * ath5k_beacon_update_timers - update beacon timers
2140 * @sc: struct ath5k_softc pointer we are operating on
2141 * @bc_tsf: the timestamp of the beacon. 0 to reset the TSF. -1 to perform a
2142 * beacon timer update based on the current HW TSF.
2144 * Calculate the next target beacon transmit time (TBTT) based on the timestamp
2145 * of a received beacon or the current local hardware TSF and write it to the
2146 * beacon timer registers.
2148 * This is called in a variety of situations, e.g. when a beacon is received,
2149 * when a TSF update has been detected, but also when an new IBSS is created or
2150 * when we otherwise know we have to update the timers, but we keep it in this
2151 * function to have it all together in one place.
2154 ath5k_beacon_update_timers(struct ath5k_softc
*sc
, u64 bc_tsf
)
2156 struct ath5k_hw
*ah
= sc
->ah
;
2157 u32 nexttbtt
, intval
, hw_tu
, bc_tu
;
2160 intval
= sc
->bintval
& AR5K_BEACON_PERIOD
;
2161 if (WARN_ON(!intval
))
2164 /* beacon TSF converted to TU */
2165 bc_tu
= TSF_TO_TU(bc_tsf
);
2167 /* current TSF converted to TU */
2168 hw_tsf
= ath5k_hw_get_tsf64(ah
);
2169 hw_tu
= TSF_TO_TU(hw_tsf
);
2172 /* we use FUDGE to make sure the next TBTT is ahead of the current TU */
2175 * no beacons received, called internally.
2176 * just need to refresh timers based on HW TSF.
2178 nexttbtt
= roundup(hw_tu
+ FUDGE
, intval
);
2179 } else if (bc_tsf
== 0) {
2181 * no beacon received, probably called by ath5k_reset_tsf().
2182 * reset TSF to start with 0.
2185 intval
|= AR5K_BEACON_RESET_TSF
;
2186 } else if (bc_tsf
> hw_tsf
) {
2188 * beacon received, SW merge happend but HW TSF not yet updated.
2189 * not possible to reconfigure timers yet, but next time we
2190 * receive a beacon with the same BSSID, the hardware will
2191 * automatically update the TSF and then we need to reconfigure
2194 ATH5K_DBG_UNLIMIT(sc
, ATH5K_DEBUG_BEACON
,
2195 "need to wait for HW TSF sync\n");
2199 * most important case for beacon synchronization between STA.
2201 * beacon received and HW TSF has been already updated by HW.
2202 * update next TBTT based on the TSF of the beacon, but make
2203 * sure it is ahead of our local TSF timer.
2205 nexttbtt
= bc_tu
+ roundup(hw_tu
+ FUDGE
- bc_tu
, intval
);
2209 sc
->nexttbtt
= nexttbtt
;
2211 intval
|= AR5K_BEACON_ENA
;
2212 ath5k_hw_init_beacon(ah
, nexttbtt
, intval
);
2215 * debugging output last in order to preserve the time critical aspect
2219 ATH5K_DBG_UNLIMIT(sc
, ATH5K_DEBUG_BEACON
,
2220 "reconfigured timers based on HW TSF\n");
2221 else if (bc_tsf
== 0)
2222 ATH5K_DBG_UNLIMIT(sc
, ATH5K_DEBUG_BEACON
,
2223 "reset HW TSF and timers\n");
2225 ATH5K_DBG_UNLIMIT(sc
, ATH5K_DEBUG_BEACON
,
2226 "updated timers based on beacon TSF\n");
2228 ATH5K_DBG_UNLIMIT(sc
, ATH5K_DEBUG_BEACON
,
2229 "bc_tsf %llx hw_tsf %llx bc_tu %u hw_tu %u nexttbtt %u\n",
2230 (unsigned long long) bc_tsf
,
2231 (unsigned long long) hw_tsf
, bc_tu
, hw_tu
, nexttbtt
);
2232 ATH5K_DBG_UNLIMIT(sc
, ATH5K_DEBUG_BEACON
, "intval %u %s %s\n",
2233 intval
& AR5K_BEACON_PERIOD
,
2234 intval
& AR5K_BEACON_ENA
? "AR5K_BEACON_ENA" : "",
2235 intval
& AR5K_BEACON_RESET_TSF
? "AR5K_BEACON_RESET_TSF" : "");
2240 * ath5k_beacon_config - Configure the beacon queues and interrupts
2242 * @sc: struct ath5k_softc pointer we are operating on
2244 * In IBSS mode we use a self-linked tx descriptor if possible. We enable SWBA
2245 * interrupts to detect TSF updates only.
2248 ath5k_beacon_config(struct ath5k_softc
*sc
)
2250 struct ath5k_hw
*ah
= sc
->ah
;
2251 unsigned long flags
;
2253 ath5k_hw_set_imr(ah
, 0);
2255 sc
->imask
&= ~(AR5K_INT_BMISS
| AR5K_INT_SWBA
);
2257 if (sc
->opmode
== NL80211_IFTYPE_ADHOC
||
2258 sc
->opmode
== NL80211_IFTYPE_MESH_POINT
||
2259 sc
->opmode
== NL80211_IFTYPE_AP
) {
2261 * In IBSS mode we use a self-linked tx descriptor and let the
2262 * hardware send the beacons automatically. We have to load it
2264 * We use the SWBA interrupt only to keep track of the beacon
2265 * timers in order to detect automatic TSF updates.
2267 ath5k_beaconq_config(sc
);
2269 sc
->imask
|= AR5K_INT_SWBA
;
2271 if (sc
->opmode
== NL80211_IFTYPE_ADHOC
) {
2272 if (ath5k_hw_hasveol(ah
)) {
2273 spin_lock_irqsave(&sc
->block
, flags
);
2274 ath5k_beacon_send(sc
);
2275 spin_unlock_irqrestore(&sc
->block
, flags
);
2278 ath5k_beacon_update_timers(sc
, -1);
2281 ath5k_hw_set_imr(ah
, sc
->imask
);
2285 /********************\
2286 * Interrupt handling *
2287 \********************/
2290 ath5k_init(struct ath5k_softc
*sc
)
2292 struct ath5k_hw
*ah
= sc
->ah
;
2295 mutex_lock(&sc
->lock
);
2297 ATH5K_DBG(sc
, ATH5K_DEBUG_RESET
, "mode %d\n", sc
->opmode
);
2300 * Stop anything previously setup. This is safe
2301 * no matter this is the first time through or not.
2303 ath5k_stop_locked(sc
);
2306 * The basic interface to setting the hardware in a good
2307 * state is ``reset''. On return the hardware is known to
2308 * be powered up and with interrupts disabled. This must
2309 * be followed by initialization of the appropriate bits
2310 * and then setup of the interrupt mask.
2312 sc
->curchan
= sc
->hw
->conf
.channel
;
2313 sc
->curband
= &sc
->sbands
[sc
->curchan
->band
];
2314 sc
->imask
= AR5K_INT_RXOK
| AR5K_INT_RXERR
| AR5K_INT_RXEOL
|
2315 AR5K_INT_RXORN
| AR5K_INT_TXDESC
| AR5K_INT_TXEOL
|
2316 AR5K_INT_FATAL
| AR5K_INT_GLOBAL
;
2317 ret
= ath5k_reset(sc
, false, false);
2322 * Reset the key cache since some parts do not reset the
2323 * contents on initial power up or resume from suspend.
2325 for (i
= 0; i
< AR5K_KEYTABLE_SIZE
; i
++)
2326 ath5k_hw_reset_key(ah
, i
);
2328 /* Set ack to be sent at low bit-rates */
2329 ath5k_hw_set_ack_bitrate_high(ah
, false);
2331 mod_timer(&sc
->calib_tim
, round_jiffies(jiffies
+
2332 msecs_to_jiffies(ath5k_calinterval
* 1000)));
2337 mutex_unlock(&sc
->lock
);
2342 ath5k_stop_locked(struct ath5k_softc
*sc
)
2344 struct ath5k_hw
*ah
= sc
->ah
;
2346 ATH5K_DBG(sc
, ATH5K_DEBUG_RESET
, "invalid %u\n",
2347 test_bit(ATH_STAT_INVALID
, sc
->status
));
2350 * Shutdown the hardware and driver:
2351 * stop output from above
2352 * disable interrupts
2354 * turn off the radio
2355 * clear transmit machinery
2356 * clear receive machinery
2357 * drain and release tx queues
2358 * reclaim beacon resources
2359 * power down hardware
2361 * Note that some of this work is not possible if the
2362 * hardware is gone (invalid).
2364 ieee80211_stop_queues(sc
->hw
);
2366 if (!test_bit(ATH_STAT_INVALID
, sc
->status
)) {
2368 ath5k_hw_set_imr(ah
, 0);
2369 synchronize_irq(sc
->pdev
->irq
);
2371 ath5k_txq_cleanup(sc
);
2372 if (!test_bit(ATH_STAT_INVALID
, sc
->status
)) {
2374 ath5k_hw_phy_disable(ah
);
2382 * Stop the device, grabbing the top-level lock to protect
2383 * against concurrent entry through ath5k_init (which can happen
2384 * if another thread does a system call and the thread doing the
2385 * stop is preempted).
2388 ath5k_stop_hw(struct ath5k_softc
*sc
)
2392 mutex_lock(&sc
->lock
);
2393 ret
= ath5k_stop_locked(sc
);
2394 if (ret
== 0 && !test_bit(ATH_STAT_INVALID
, sc
->status
)) {
2396 * Set the chip in full sleep mode. Note that we are
2397 * careful to do this only when bringing the interface
2398 * completely to a stop. When the chip is in this state
2399 * it must be carefully woken up or references to
2400 * registers in the PCI clock domain may freeze the bus
2401 * (and system). This varies by chip and is mostly an
2402 * issue with newer parts that go to sleep more quickly.
2404 if (sc
->ah
->ah_mac_srev
>= 0x78) {
2407 * don't put newer MAC revisions > 7.8 to sleep because
2408 * of the above mentioned problems
2410 ATH5K_DBG(sc
, ATH5K_DEBUG_RESET
, "mac version > 7.8, "
2411 "not putting device to sleep\n");
2413 ATH5K_DBG(sc
, ATH5K_DEBUG_RESET
,
2414 "putting device to full sleep\n");
2415 ath5k_hw_set_power(sc
->ah
, AR5K_PM_FULL_SLEEP
, true, 0);
2418 ath5k_txbuf_free(sc
, sc
->bbuf
);
2421 mutex_unlock(&sc
->lock
);
2423 del_timer_sync(&sc
->calib_tim
);
2424 tasklet_kill(&sc
->rxtq
);
2425 tasklet_kill(&sc
->txtq
);
2426 tasklet_kill(&sc
->restq
);
2427 tasklet_kill(&sc
->beacontq
);
2433 ath5k_intr(int irq
, void *dev_id
)
2435 struct ath5k_softc
*sc
= dev_id
;
2436 struct ath5k_hw
*ah
= sc
->ah
;
2437 enum ath5k_int status
;
2438 unsigned int counter
= 1000;
2440 if (unlikely(test_bit(ATH_STAT_INVALID
, sc
->status
) ||
2441 !ath5k_hw_is_intr_pending(ah
)))
2445 ath5k_hw_get_isr(ah
, &status
); /* NB: clears IRQ too */
2446 ATH5K_DBG(sc
, ATH5K_DEBUG_INTR
, "status 0x%x/0x%x\n",
2448 if (unlikely(status
& AR5K_INT_FATAL
)) {
2450 * Fatal errors are unrecoverable.
2451 * Typically these are caused by DMA errors.
2453 tasklet_schedule(&sc
->restq
);
2454 } else if (unlikely(status
& AR5K_INT_RXORN
)) {
2455 tasklet_schedule(&sc
->restq
);
2457 if (status
& AR5K_INT_SWBA
) {
2458 tasklet_schedule(&sc
->beacontq
);
2460 if (status
& AR5K_INT_RXEOL
) {
2462 * NB: the hardware should re-read the link when
2463 * RXE bit is written, but it doesn't work at
2464 * least on older hardware revs.
2468 if (status
& AR5K_INT_TXURN
) {
2469 /* bump tx trigger level */
2470 ath5k_hw_update_tx_triglevel(ah
, true);
2472 if (status
& (AR5K_INT_RXOK
| AR5K_INT_RXERR
))
2473 tasklet_schedule(&sc
->rxtq
);
2474 if (status
& (AR5K_INT_TXOK
| AR5K_INT_TXDESC
2475 | AR5K_INT_TXERR
| AR5K_INT_TXEOL
))
2476 tasklet_schedule(&sc
->txtq
);
2477 if (status
& AR5K_INT_BMISS
) {
2480 if (status
& AR5K_INT_MIB
) {
2482 * These stats are also used for ANI i think
2483 * so how about updating them more often ?
2485 ath5k_hw_update_mib_counters(ah
, &sc
->ll_stats
);
2488 } while (ath5k_hw_is_intr_pending(ah
) && counter
-- > 0);
2490 if (unlikely(!counter
))
2491 ATH5K_WARN(sc
, "too many interrupts, giving up for now\n");
2497 ath5k_tasklet_reset(unsigned long data
)
2499 struct ath5k_softc
*sc
= (void *)data
;
2501 ath5k_reset_wake(sc
);
2505 * Periodically recalibrate the PHY to account
2506 * for temperature/environment changes.
2509 ath5k_calibrate(unsigned long data
)
2511 struct ath5k_softc
*sc
= (void *)data
;
2512 struct ath5k_hw
*ah
= sc
->ah
;
2514 ATH5K_DBG(sc
, ATH5K_DEBUG_CALIBRATE
, "channel %u/%x\n",
2515 ieee80211_frequency_to_channel(sc
->curchan
->center_freq
),
2516 sc
->curchan
->hw_value
);
2518 if (ath5k_hw_gainf_calibrate(ah
) == AR5K_RFGAIN_NEED_CHANGE
) {
2520 * Rfgain is out of bounds, reset the chip
2521 * to load new gain values.
2523 ATH5K_DBG(sc
, ATH5K_DEBUG_RESET
, "calibration, resetting\n");
2524 ath5k_reset_wake(sc
);
2526 if (ath5k_hw_phy_calibrate(ah
, sc
->curchan
))
2527 ATH5K_ERR(sc
, "calibration of channel %u failed\n",
2528 ieee80211_frequency_to_channel(
2529 sc
->curchan
->center_freq
));
2531 mod_timer(&sc
->calib_tim
, round_jiffies(jiffies
+
2532 msecs_to_jiffies(ath5k_calinterval
* 1000)));
2536 /********************\
2537 * Mac80211 functions *
2538 \********************/
2541 ath5k_tx(struct ieee80211_hw
*hw
, struct sk_buff
*skb
)
2543 struct ath5k_softc
*sc
= hw
->priv
;
2544 struct ath5k_buf
*bf
;
2545 unsigned long flags
;
2549 ath5k_debug_dump_skb(sc
, skb
, "TX ", 1);
2551 if (sc
->opmode
== NL80211_IFTYPE_MONITOR
)
2552 ATH5K_DBG(sc
, ATH5K_DEBUG_XMIT
, "tx in monitor (scan?)\n");
2555 * the hardware expects the header padded to 4 byte boundaries
2556 * if this is not the case we add the padding after the header
2558 hdrlen
= ieee80211_get_hdrlen_from_skb(skb
);
2559 padsize
= ath5k_pad_size(hdrlen
);
2562 if (skb_headroom(skb
) < padsize
) {
2563 ATH5K_ERR(sc
, "tx hdrlen not %%4: %d not enough"
2564 " headroom to pad %d\n", hdrlen
, padsize
);
2567 skb_push(skb
, padsize
);
2568 memmove(skb
->data
, skb
->data
+padsize
, hdrlen
);
2571 spin_lock_irqsave(&sc
->txbuflock
, flags
);
2572 if (list_empty(&sc
->txbuf
)) {
2573 ATH5K_ERR(sc
, "no further txbuf available, dropping packet\n");
2574 spin_unlock_irqrestore(&sc
->txbuflock
, flags
);
2575 ieee80211_stop_queue(hw
, skb_get_queue_mapping(skb
));
2578 bf
= list_first_entry(&sc
->txbuf
, struct ath5k_buf
, list
);
2579 list_del(&bf
->list
);
2581 if (list_empty(&sc
->txbuf
))
2582 ieee80211_stop_queues(hw
);
2583 spin_unlock_irqrestore(&sc
->txbuflock
, flags
);
2587 if (ath5k_txbuf_setup(sc
, bf
)) {
2589 spin_lock_irqsave(&sc
->txbuflock
, flags
);
2590 list_add_tail(&bf
->list
, &sc
->txbuf
);
2592 spin_unlock_irqrestore(&sc
->txbuflock
, flags
);
2595 return NETDEV_TX_OK
;
2598 dev_kfree_skb_any(skb
);
2599 return NETDEV_TX_OK
;
2603 ath5k_reset(struct ath5k_softc
*sc
, bool stop
, bool change_channel
)
2605 struct ath5k_hw
*ah
= sc
->ah
;
2608 ATH5K_DBG(sc
, ATH5K_DEBUG_RESET
, "resetting\n");
2611 ath5k_hw_set_imr(ah
, 0);
2612 ath5k_txq_cleanup(sc
);
2615 ret
= ath5k_hw_reset(ah
, sc
->opmode
, sc
->curchan
, true);
2617 ATH5K_ERR(sc
, "can't reset hardware (%d)\n", ret
);
2621 ret
= ath5k_rx_start(sc
);
2623 ATH5K_ERR(sc
, "can't start recv logic\n");
2628 * Change channels and update the h/w rate map if we're switching;
2629 * e.g. 11a to 11b/g.
2631 * We may be doing a reset in response to an ioctl that changes the
2632 * channel so update any state that might change as a result.
2636 /* ath5k_chan_change(sc, c); */
2638 ath5k_beacon_config(sc
);
2639 /* intrs are enabled by ath5k_beacon_config */
2647 ath5k_reset_wake(struct ath5k_softc
*sc
)
2651 ret
= ath5k_reset(sc
, true, true);
2653 ieee80211_wake_queues(sc
->hw
);
2658 static int ath5k_start(struct ieee80211_hw
*hw
)
2660 return ath5k_init(hw
->priv
);
2663 static void ath5k_stop(struct ieee80211_hw
*hw
)
2665 ath5k_stop_hw(hw
->priv
);
2668 static int ath5k_add_interface(struct ieee80211_hw
*hw
,
2669 struct ieee80211_if_init_conf
*conf
)
2671 struct ath5k_softc
*sc
= hw
->priv
;
2674 mutex_lock(&sc
->lock
);
2680 sc
->vif
= conf
->vif
;
2682 switch (conf
->type
) {
2683 case NL80211_IFTYPE_AP
:
2684 case NL80211_IFTYPE_STATION
:
2685 case NL80211_IFTYPE_ADHOC
:
2686 case NL80211_IFTYPE_MESH_POINT
:
2687 case NL80211_IFTYPE_MONITOR
:
2688 sc
->opmode
= conf
->type
;
2695 /* Set to a reasonable value. Note that this will
2696 * be set to mac80211's value at ath5k_config(). */
2698 ath5k_hw_set_lladdr(sc
->ah
, conf
->mac_addr
);
2702 mutex_unlock(&sc
->lock
);
2707 ath5k_remove_interface(struct ieee80211_hw
*hw
,
2708 struct ieee80211_if_init_conf
*conf
)
2710 struct ath5k_softc
*sc
= hw
->priv
;
2711 u8 mac
[ETH_ALEN
] = {};
2713 mutex_lock(&sc
->lock
);
2714 if (sc
->vif
!= conf
->vif
)
2717 ath5k_hw_set_lladdr(sc
->ah
, mac
);
2720 mutex_unlock(&sc
->lock
);
2724 * TODO: Phy disable/diversity etc
2727 ath5k_config(struct ieee80211_hw
*hw
, u32 changed
)
2729 struct ath5k_softc
*sc
= hw
->priv
;
2730 struct ieee80211_conf
*conf
= &hw
->conf
;
2733 mutex_lock(&sc
->lock
);
2735 sc
->bintval
= conf
->beacon_int
;
2736 sc
->power_level
= conf
->power_level
;
2738 ret
= ath5k_chan_set(sc
, conf
->channel
);
2740 mutex_unlock(&sc
->lock
);
2745 ath5k_config_interface(struct ieee80211_hw
*hw
, struct ieee80211_vif
*vif
,
2746 struct ieee80211_if_conf
*conf
)
2748 struct ath5k_softc
*sc
= hw
->priv
;
2749 struct ath5k_hw
*ah
= sc
->ah
;
2752 mutex_lock(&sc
->lock
);
2753 if (sc
->vif
!= vif
) {
2757 if (conf
->changed
& IEEE80211_IFCC_BSSID
&& conf
->bssid
) {
2758 /* Cache for later use during resets */
2759 memcpy(ah
->ah_bssid
, conf
->bssid
, ETH_ALEN
);
2760 /* XXX: assoc id is set to 0 for now, mac80211 doesn't have
2761 * a clean way of letting us retrieve this yet. */
2762 ath5k_hw_set_associd(ah
, ah
->ah_bssid
, 0);
2765 if (conf
->changed
& IEEE80211_IFCC_BEACON
&&
2766 (vif
->type
== NL80211_IFTYPE_ADHOC
||
2767 vif
->type
== NL80211_IFTYPE_MESH_POINT
||
2768 vif
->type
== NL80211_IFTYPE_AP
)) {
2769 struct sk_buff
*beacon
= ieee80211_beacon_get(hw
, vif
);
2774 ath5k_beacon_update(sc
, beacon
);
2778 mutex_unlock(&sc
->lock
);
2782 #define SUPPORTED_FIF_FLAGS \
2783 FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | \
2784 FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \
2785 FIF_BCN_PRBRESP_PROMISC
2787 * o always accept unicast, broadcast, and multicast traffic
2788 * o multicast traffic for all BSSIDs will be enabled if mac80211
2790 * o maintain current state of phy ofdm or phy cck error reception.
2791 * If the hardware detects any of these type of errors then
2792 * ath5k_hw_get_rx_filter() will pass to us the respective
2793 * hardware filters to be able to receive these type of frames.
2794 * o probe request frames are accepted only when operating in
2795 * hostap, adhoc, or monitor modes
2796 * o enable promiscuous mode according to the interface state
2798 * - when operating in adhoc mode so the 802.11 layer creates
2799 * node table entries for peers,
2800 * - when operating in station mode for collecting rssi data when
2801 * the station is otherwise quiet, or
2804 static void ath5k_configure_filter(struct ieee80211_hw
*hw
,
2805 unsigned int changed_flags
,
2806 unsigned int *new_flags
,
2807 int mc_count
, struct dev_mc_list
*mclist
)
2809 struct ath5k_softc
*sc
= hw
->priv
;
2810 struct ath5k_hw
*ah
= sc
->ah
;
2811 u32 mfilt
[2], val
, rfilt
;
2818 /* Only deal with supported flags */
2819 changed_flags
&= SUPPORTED_FIF_FLAGS
;
2820 *new_flags
&= SUPPORTED_FIF_FLAGS
;
2822 /* If HW detects any phy or radar errors, leave those filters on.
2823 * Also, always enable Unicast, Broadcasts and Multicast
2824 * XXX: move unicast, bssid broadcasts and multicast to mac80211 */
2825 rfilt
= (ath5k_hw_get_rx_filter(ah
) & (AR5K_RX_FILTER_PHYERR
)) |
2826 (AR5K_RX_FILTER_UCAST
| AR5K_RX_FILTER_BCAST
|
2827 AR5K_RX_FILTER_MCAST
);
2829 if (changed_flags
& (FIF_PROMISC_IN_BSS
| FIF_OTHER_BSS
)) {
2830 if (*new_flags
& FIF_PROMISC_IN_BSS
) {
2831 rfilt
|= AR5K_RX_FILTER_PROM
;
2832 __set_bit(ATH_STAT_PROMISC
, sc
->status
);
2834 __clear_bit(ATH_STAT_PROMISC
, sc
->status
);
2838 /* Note, AR5K_RX_FILTER_MCAST is already enabled */
2839 if (*new_flags
& FIF_ALLMULTI
) {
2843 for (i
= 0; i
< mc_count
; i
++) {
2846 /* calculate XOR of eight 6-bit values */
2847 val
= get_unaligned_le32(mclist
->dmi_addr
+ 0);
2848 pos
= (val
>> 18) ^ (val
>> 12) ^ (val
>> 6) ^ val
;
2849 val
= get_unaligned_le32(mclist
->dmi_addr
+ 3);
2850 pos
^= (val
>> 18) ^ (val
>> 12) ^ (val
>> 6) ^ val
;
2852 mfilt
[pos
/ 32] |= (1 << (pos
% 32));
2853 /* XXX: we might be able to just do this instead,
2854 * but not sure, needs testing, if we do use this we'd
2855 * neet to inform below to not reset the mcast */
2856 /* ath5k_hw_set_mcast_filterindex(ah,
2857 * mclist->dmi_addr[5]); */
2858 mclist
= mclist
->next
;
2862 /* This is the best we can do */
2863 if (*new_flags
& (FIF_FCSFAIL
| FIF_PLCPFAIL
))
2864 rfilt
|= AR5K_RX_FILTER_PHYERR
;
2866 /* FIF_BCN_PRBRESP_PROMISC really means to enable beacons
2867 * and probes for any BSSID, this needs testing */
2868 if (*new_flags
& FIF_BCN_PRBRESP_PROMISC
)
2869 rfilt
|= AR5K_RX_FILTER_BEACON
| AR5K_RX_FILTER_PROBEREQ
;
2871 /* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not
2872 * set we should only pass on control frames for this
2873 * station. This needs testing. I believe right now this
2874 * enables *all* control frames, which is OK.. but
2875 * but we should see if we can improve on granularity */
2876 if (*new_flags
& FIF_CONTROL
)
2877 rfilt
|= AR5K_RX_FILTER_CONTROL
;
2879 /* Additional settings per mode -- this is per ath5k */
2881 /* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */
2883 if (sc
->opmode
== NL80211_IFTYPE_MONITOR
)
2884 rfilt
|= AR5K_RX_FILTER_CONTROL
| AR5K_RX_FILTER_BEACON
|
2885 AR5K_RX_FILTER_PROBEREQ
| AR5K_RX_FILTER_PROM
;
2886 if (sc
->opmode
!= NL80211_IFTYPE_STATION
)
2887 rfilt
|= AR5K_RX_FILTER_PROBEREQ
;
2888 if (sc
->opmode
!= NL80211_IFTYPE_AP
&&
2889 sc
->opmode
!= NL80211_IFTYPE_MESH_POINT
&&
2890 test_bit(ATH_STAT_PROMISC
, sc
->status
))
2891 rfilt
|= AR5K_RX_FILTER_PROM
;
2892 if ((sc
->opmode
== NL80211_IFTYPE_STATION
&& sc
->assoc
) ||
2893 sc
->opmode
== NL80211_IFTYPE_ADHOC
||
2894 sc
->opmode
== NL80211_IFTYPE_AP
)
2895 rfilt
|= AR5K_RX_FILTER_BEACON
;
2896 if (sc
->opmode
== NL80211_IFTYPE_MESH_POINT
)
2897 rfilt
|= AR5K_RX_FILTER_CONTROL
| AR5K_RX_FILTER_BEACON
|
2898 AR5K_RX_FILTER_PROBEREQ
| AR5K_RX_FILTER_PROM
;
2901 ath5k_hw_set_rx_filter(ah
, rfilt
);
2903 /* Set multicast bits */
2904 ath5k_hw_set_mcast_filter(ah
, mfilt
[0], mfilt
[1]);
2905 /* Set the cached hw filter flags, this will alter actually
2907 sc
->filter_flags
= rfilt
;
2911 ath5k_set_key(struct ieee80211_hw
*hw
, enum set_key_cmd cmd
,
2912 struct ieee80211_vif
*vif
, struct ieee80211_sta
*sta
,
2913 struct ieee80211_key_conf
*key
)
2915 struct ath5k_softc
*sc
= hw
->priv
;
2918 if (modparam_nohwcrypt
)
2932 mutex_lock(&sc
->lock
);
2936 ret
= ath5k_hw_set_key(sc
->ah
, key
->keyidx
, key
,
2937 sta
? sta
->addr
: NULL
);
2939 ATH5K_ERR(sc
, "can't set the key\n");
2942 __set_bit(key
->keyidx
, sc
->keymap
);
2943 key
->hw_key_idx
= key
->keyidx
;
2944 key
->flags
|= (IEEE80211_KEY_FLAG_GENERATE_IV
|
2945 IEEE80211_KEY_FLAG_GENERATE_MMIC
);
2948 ath5k_hw_reset_key(sc
->ah
, key
->keyidx
);
2949 __clear_bit(key
->keyidx
, sc
->keymap
);
2958 mutex_unlock(&sc
->lock
);
2963 ath5k_get_stats(struct ieee80211_hw
*hw
,
2964 struct ieee80211_low_level_stats
*stats
)
2966 struct ath5k_softc
*sc
= hw
->priv
;
2967 struct ath5k_hw
*ah
= sc
->ah
;
2970 ath5k_hw_update_mib_counters(ah
, &sc
->ll_stats
);
2972 memcpy(stats
, &sc
->ll_stats
, sizeof(sc
->ll_stats
));
2978 ath5k_get_tx_stats(struct ieee80211_hw
*hw
,
2979 struct ieee80211_tx_queue_stats
*stats
)
2981 struct ath5k_softc
*sc
= hw
->priv
;
2983 memcpy(stats
, &sc
->tx_stats
, sizeof(sc
->tx_stats
));
2989 ath5k_get_tsf(struct ieee80211_hw
*hw
)
2991 struct ath5k_softc
*sc
= hw
->priv
;
2993 return ath5k_hw_get_tsf64(sc
->ah
);
2997 ath5k_set_tsf(struct ieee80211_hw
*hw
, u64 tsf
)
2999 struct ath5k_softc
*sc
= hw
->priv
;
3001 ath5k_hw_set_tsf64(sc
->ah
, tsf
);
3005 ath5k_reset_tsf(struct ieee80211_hw
*hw
)
3007 struct ath5k_softc
*sc
= hw
->priv
;
3010 * in IBSS mode we need to update the beacon timers too.
3011 * this will also reset the TSF if we call it with 0
3013 if (sc
->opmode
== NL80211_IFTYPE_ADHOC
)
3014 ath5k_beacon_update_timers(sc
, 0);
3016 ath5k_hw_reset_tsf(sc
->ah
);
3020 ath5k_beacon_update(struct ath5k_softc
*sc
, struct sk_buff
*skb
)
3022 unsigned long flags
;
3025 ath5k_debug_dump_skb(sc
, skb
, "BC ", 1);
3027 spin_lock_irqsave(&sc
->block
, flags
);
3028 ath5k_txbuf_free(sc
, sc
->bbuf
);
3029 sc
->bbuf
->skb
= skb
;
3030 ret
= ath5k_beacon_setup(sc
, sc
->bbuf
);
3032 sc
->bbuf
->skb
= NULL
;
3033 spin_unlock_irqrestore(&sc
->block
, flags
);
3035 ath5k_beacon_config(sc
);
3042 set_beacon_filter(struct ieee80211_hw
*hw
, bool enable
)
3044 struct ath5k_softc
*sc
= hw
->priv
;
3045 struct ath5k_hw
*ah
= sc
->ah
;
3047 rfilt
= ath5k_hw_get_rx_filter(ah
);
3049 rfilt
|= AR5K_RX_FILTER_BEACON
;
3051 rfilt
&= ~AR5K_RX_FILTER_BEACON
;
3052 ath5k_hw_set_rx_filter(ah
, rfilt
);
3053 sc
->filter_flags
= rfilt
;
3056 static void ath5k_bss_info_changed(struct ieee80211_hw
*hw
,
3057 struct ieee80211_vif
*vif
,
3058 struct ieee80211_bss_conf
*bss_conf
,
3061 struct ath5k_softc
*sc
= hw
->priv
;
3062 if (changes
& BSS_CHANGED_ASSOC
) {
3063 mutex_lock(&sc
->lock
);
3064 sc
->assoc
= bss_conf
->assoc
;
3065 if (sc
->opmode
== NL80211_IFTYPE_STATION
)
3066 set_beacon_filter(hw
, sc
->assoc
);
3067 mutex_unlock(&sc
->lock
);