drivers/net/wireless/atmel_cs.c

   1 /*** -*- linux-c -*- **********************************************************
   2
   3      Driver for Atmel at76c502 at76c504 and at76c506 wireless cards.
   4
   5         Copyright 2000-2001 ATMEL Corporation.
   6         Copyright 2003 Simon Kelley.
   7
   8     This code was developed from version 2.1.1 of the Atmel drivers,
   9     released by Atmel corp. under the GPL in December 2002. It also
  10     includes code from the Linux aironet drivers (C) Benjamin Reed,
  11     and the Linux PCMCIA package, (C) David Hinds.
  12
  13     For all queries about this code, please contact the current author,
  14     Simon Kelley <simon@thekelleys.org.uk> and not Atmel Corporation.
  15
  16     This program is free software; you can redistribute it and/or modify
  17     it under the terms of the GNU General Public License as published by
  18     the Free Software Foundation; either version 2 of the License, or
  19     (at your option) any later version.
  20
  21     This software is distributed in the hope that it will be useful,
  22     but WITHOUT ANY WARRANTY; without even the implied warranty of
  23     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  24     GNU General Public License for more details.
  25
  26     You should have received a copy of the GNU General Public License
  27     along with Atmel wireless lan drivers; if not, write to the Free Software
  28     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  29
  30 ******************************************************************************/
  31
  32 #include <linux/config.h>
  33 #ifdef __IN_PCMCIA_PACKAGE__
  34 #include <pcmcia/k_compat.h>
  35 #endif
  36 #include <linux/init.h>
  37 #include <linux/kernel.h>
  38 #include <linux/module.h>
  39 #include <linux/ptrace.h>
  40 #include <linux/slab.h>
  41 #include <linux/string.h>
  42 #include <linux/netdevice.h>
  43 #include <linux/moduleparam.h>
  44 #include <linux/device.h>
  45
  46 #include <pcmcia/version.h>
  47 #include <pcmcia/cs_types.h>
  48 #include <pcmcia/cs.h>
  49 #include <pcmcia/cistpl.h>
  50 #include <pcmcia/cisreg.h>
  51 #include <pcmcia/ds.h>
  52 #include <pcmcia/ciscode.h>
  53
  54 #include <asm/io.h>
  55 #include <asm/system.h>
  56 #include <linux/wireless.h>
  57
  58 #include "atmel.h"
  59
  60 /*
  61    All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
  62    you do not define PCMCIA_DEBUG at all, all the debug code will be
  63    left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
  64    be present but disabled -- but it can then be enabled for specific
  65    modules at load time with a 'pc_debug=#' option to insmod.
  66 */
  67 #ifdef PCMCIA_DEBUG
  68 static int pc_debug = PCMCIA_DEBUG;
  69 module_param(pc_debug, int, 0);
  70 static char *version = "$Revision: 1.2 $";
  71 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
  72 #else
  73 #define DEBUG(n, args...)
  74 #endif
  75
  76 /*====================================================================*/
  77
  78 MODULE_AUTHOR("Simon Kelley");
  79 MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.");
  80 MODULE_LICENSE("GPL");
  81 MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards");
  82
  83 /*====================================================================*/
  84
  85 /*
  86    The event() function is this driver's Card Services event handler.
  87    It will be called by Card Services when an appropriate card status
  88    event is received.  The config() and release() entry points are
  89    used to configure or release a socket, in response to card
  90    insertion and ejection events.  They are invoked from the atmel_cs
  91    event handler.
  92 */
  93
  94 static void atmel_config(dev_link_t *link);
  95 static void atmel_release(dev_link_t *link);
  96 static int atmel_event(event_t event, int priority,
  97                        event_callback_args_t *args);
  98
  99 /*
 100    The attach() and detach() entry points are used to create and destroy
 101    "instances" of the driver, where each instance represents everything
 102    needed to manage one actual PCMCIA card.
 103 */
 104
 105 static dev_link_t *atmel_attach(void);
 106 static void atmel_detach(dev_link_t *);
 107
 108 /*
 109    You'll also need to prototype all the functions that will actually
 110    be used to talk to your device.  See 'pcmem_cs' for a good example
 111    of a fully self-sufficient driver; the other drivers rely more or
 112    less on other parts of the kernel.
 113 */
 114
 115 /*
 116    The dev_info variable is the "key" that is used to match up this
 117    device driver with appropriate cards, through the card configuration
 118    database.
 119 */
 120
 121 static dev_info_t dev_info = "atmel_cs";
 122
 123 /*
 124    A linked list of "instances" of the  atmelnet device.  Each actual
 125    PCMCIA card corresponds to one device instance, and is described
 126    by one dev_link_t structure (defined in ds.h).
 127
 128    You may not want to use a linked list for this -- for example, the
 129    memory card driver uses an array of dev_link_t pointers, where minor
 130    device numbers are used to derive the corresponding array index.
 131 */
 132
 133 static dev_link_t *dev_list = NULL;
 134
 135 /*
 136    A dev_link_t structure has fields for most things that are needed
 137    to keep track of a socket, but there will usually be some device
 138    specific information that also needs to be kept track of.  The
 139    'priv' pointer in a dev_link_t structure can be used to point to
 140    a device-specific private data structure, like this.
 141
 142    A driver needs to provide a dev_node_t structure for each device
 143    on a card.  In some cases, there is only one device per card (for
 144    example, ethernet cards, modems).  In other cases, there may be
 145    many actual or logical devices (SCSI adapters, memory cards with
 146    multiple partitions).  The dev_node_t structures need to be kept
 147    in a linked list starting at the 'dev' field of a dev_link_t
 148    structure.  We allocate them in the card's private data structure,
 149    because they generally shouldn't be allocated dynamically.
 150
 151    In this case, we also provide a flag to indicate if a device is
 152    "stopped" due to a power management event, or card ejection.  The
 153    device IO routines can use a flag like this to throttle IO to a
 154    card that is not ready to accept it.
 155 */
 156
 157 typedef struct local_info_t {
 158         dev_node_t      node;
 159         struct net_device *eth_dev;
 160 } local_info_t;
 161
 162 /*======================================================================
 163
 164   atmel_attach() creates an "instance" of the driver, allocating
 165   local data structures for one device.  The device is registered
 166   with Card Services.
 167
 168   The dev_link structure is initialized, but we don't actually
 169   configure the card at this point -- we wait until we receive a
 170   card insertion event.
 171
 172   ======================================================================*/
 173
 174 static dev_link_t *atmel_attach(void)
 175 {
 176         client_reg_t client_reg;
 177         dev_link_t *link;
 178         local_info_t *local;
 179         int ret;
 180
 181         DEBUG(0, "atmel_attach()\n");
 182
 183         /* Initialize the dev_link_t structure */
 184         link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL);
 185         if (!link) {
 186                 printk(KERN_ERR "atmel_cs: no memory for new device\n");
 187                 return NULL;
 188         }
 189         memset(link, 0, sizeof(struct dev_link_t));
 190
 191         /* Interrupt setup */
 192         link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
 193         link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 194         link->irq.Handler = NULL;
 195
 196         /*
 197           General socket configuration defaults can go here.  In this
 198           client, we assume very little, and rely on the CIS for almost
 199           everything.  In most clients, many details (i.e., number, sizes,
 200           and attributes of IO windows) are fixed by the nature of the
 201           device, and can be hard-wired here.
 202         */
 203         link->conf.Attributes = 0;
 204         link->conf.Vcc = 50;
 205         link->conf.IntType = INT_MEMORY_AND_IO;
 206
 207         /* Allocate space for private device-specific data */
 208         local = kmalloc(sizeof(local_info_t), GFP_KERNEL);
 209         if (!local) {
 210                 printk(KERN_ERR "atmel_cs: no memory for new device\n");
 211                 kfree (link);
 212                 return NULL;
 213         }
 214         memset(local, 0, sizeof(local_info_t));
 215         link->priv = local;
 216
 217         /* Register with Card Services */
 218         link->next = dev_list;
 219         dev_list = link;
 220         client_reg.dev_info = &dev_info;
 221         client_reg.EventMask =
 222                 CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
 223                 CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
 224                 CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
 225         client_reg.event_handler = &atmel_event;
 226         client_reg.Version = 0x0210;
 227         client_reg.event_callback_args.client_data = link;
 228         ret = pcmcia_register_client(&link->handle, &client_reg);
 229         if (ret != 0) {
 230                 cs_error(link->handle, RegisterClient, ret);
 231                 atmel_detach(link);
 232                 return NULL;
 233         }
 234
 235         return link;
 236 } /* atmel_attach */
 237
 238 /*======================================================================
 239
 240   This deletes a driver "instance".  The device is de-registered
 241   with Card Services.  If it has been released, all local data
 242   structures are freed.  Otherwise, the structures will be freed
 243   when the device is released.
 244
 245   ======================================================================*/
 246
 247 static void atmel_detach(dev_link_t *link)
 248 {
 249         dev_link_t **linkp;
 250
 251         DEBUG(0, "atmel_detach(0x%p)\n", link);
 252
 253         /* Locate device structure */
 254         for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
 255                 if (*linkp == link) break;
 256         if (*linkp == NULL)
 257                 return;
 258
 259         if (link->state & DEV_CONFIG)
 260                 atmel_release(link);
 261
 262         /* Break the link with Card Services */
 263         if (link->handle)
 264                 pcmcia_deregister_client(link->handle);
 265
 266         /* Unlink device structure, free pieces */
 267         *linkp = link->next;
 268         if (link->priv)
 269                 kfree(link->priv);
 270         kfree(link);
 271 }
 272
 273 /*======================================================================
 274
 275   atmel_config() is scheduled to run after a CARD_INSERTION event
 276   is received, to configure the PCMCIA socket, and to make the
 277   device available to the system.
 278
 279   ======================================================================*/
 280
 281 #define CS_CHECK(fn, ret) \
 282 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 283
 284 /* Call-back function to interrogate PCMCIA-specific information
 285    about the current existance of the card */
 286 static int card_present(void *arg)
 287 {
 288         dev_link_t *link = (dev_link_t *)arg;
 289         if (link->state & DEV_SUSPEND)
 290                 return 0;
 291         else if (link->state & DEV_PRESENT)
 292                 return 1;
 293
 294         return 0;
 295 }
 296
 297 /* list of cards we know about and their firmware requirements.
 298    Go either by Manfid or version strings.
 299    Cards not in this list will need a firmware parameter to the module
 300    in all probability. Note that the SMC 2632 V2 and V3 have the same
 301    manfids, so we ignore those and use the version1 strings. */
 302
 303 static struct {
 304         int manf, card;
 305         char *ver1;
 306         AtmelFWType firmware;
 307         char *name;
 308 } card_table[] = {
 309         { 0, 0, "WLAN/802.11b PC CARD", ATMEL_FW_TYPE_502D, "Actiontec 802CAT1" },
 310         { 0, 0, "ATMEL/AT76C502AR", ATMEL_FW_TYPE_502, "NoName-RFMD" },
 311         { 0, 0, "ATMEL/AT76C502AR_D", ATMEL_FW_TYPE_502D, "NoName-revD" },
 312         { 0, 0, "ATMEL/AT76C502AR_E", ATMEL_FW_TYPE_502E, "NoName-revE" },
 313         { 0, 0, "ATMEL/AT76C504", ATMEL_FW_TYPE_504, "NoName-504" },
 314         { 0, 0, "ATMEL/AT76C504A", ATMEL_FW_TYPE_504A_2958, "NoName-504a-2958" },
 315         { 0, 0, "ATMEL/AT76C504_R", ATMEL_FW_TYPE_504_2958, "NoName-504-2958" },
 316         { MANFID_3COM, 0x0620, NULL, ATMEL_FW_TYPE_502_3COM, "3com 3CRWE62092B" },
 317         { MANFID_3COM, 0x0696, NULL, ATMEL_FW_TYPE_502_3COM, "3com 3CRSHPW196" },
 318         { 0, 0, "SMC/2632W-V2", ATMEL_FW_TYPE_502, "SMC 2632W-V2" },
 319         { 0, 0, "SMC/2632W", ATMEL_FW_TYPE_502D, "SMC 2632W-V3" },
 320         { 0xd601, 0x0007, NULL, ATMEL_FW_TYPE_502, "Sitecom WLAN-011" },
 321         { 0x01bf, 0x3302, NULL, ATMEL_FW_TYPE_502E, "Belkin F5D6020-V2" },
 322         { 0, 0, "BT/Voyager 1020 Laptop Adapter", ATMEL_FW_TYPE_502, "BT Voyager 1020" },
 323         { 0, 0, "IEEE 802.11b/Wireless LAN PC Card", ATMEL_FW_TYPE_502, "Siemens Gigaset PC Card II" },
 324         { 0, 0, "IEEE 802.11b/Wireless LAN Card S", ATMEL_FW_TYPE_504_2958, "Siemens Gigaset PC Card II" },
 325         { 0, 0, "CNet/CNWLC 11Mbps Wireless PC Card V-5", ATMEL_FW_TYPE_502E, "CNet CNWLC-811ARL" },
 326         { 0, 0, "Wireless/PC_CARD", ATMEL_FW_TYPE_502D, "Planet WL-3552" },
 327         { 0, 0, "OEM/11Mbps Wireless LAN PC Card V-3", ATMEL_FW_TYPE_502, "OEM 11Mbps WLAN PCMCIA Card" },
 328         { 0, 0, "11WAVE/11WP611AL-E", ATMEL_FW_TYPE_502E, "11WAVE WaveBuddy" },
 329         { 0, 0, "LG/LW2100N", ATMEL_FW_TYPE_502E, "LG LW2100N 11Mbps WLAN PCMCIA Card" },
 330 };
 331
 332 static void atmel_config(dev_link_t *link)
 333 {
 334         client_handle_t handle;
 335         tuple_t tuple;
 336         cisparse_t parse;
 337         local_info_t *dev;
 338         int last_fn, last_ret;
 339         u_char buf[64];
 340         int card_index = -1, done = 0;
 341
 342         handle = link->handle;
 343         dev = link->priv;
 344
 345         DEBUG(0, "atmel_config(0x%p)\n", link);
 346
 347         tuple.Attributes = 0;
 348         tuple.TupleData = buf;
 349         tuple.TupleDataMax = sizeof(buf);
 350         tuple.TupleOffset = 0;
 351
 352         tuple.DesiredTuple = CISTPL_MANFID;
 353         if (pcmcia_get_first_tuple(handle, &tuple) == 0) {
 354                 int i;
 355                 cistpl_manfid_t *manfid;
 356                 CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
 357                 CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
 358                 manfid = &(parse.manfid);
 359                 for (i = 0; i < sizeof(card_table)/sizeof(card_table[0]); i++) {
 360                         if (!card_table[i].ver1 &&
 361                             manfid->manf == card_table[i].manf &&
 362                             manfid->card == card_table[i].card) {
 363                                 card_index = i;
 364                                 done = 1;
 365                         }
 366                 }
 367         }
 368
 369         tuple.DesiredTuple = CISTPL_VERS_1;
 370         if (!done && (pcmcia_get_first_tuple(handle, &tuple) == 0)) {
 371                 int i, j, k;
 372                 cistpl_vers_1_t *ver1;
 373                 CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
 374                 CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
 375                 ver1 = &(parse.version_1);
 376
 377                 for (i = 0; i < sizeof(card_table)/sizeof(card_table[0]); i++) {
 378                         for (j = 0; j < ver1->ns; j++) {
 379                                 char *p = card_table[i].ver1;
 380                                 char *q = &ver1->str[ver1->ofs[j]];
 381                                 if (!p)
 382                                         goto mismatch;
 383                                 for (k = 0; k < j; k++) {
 384                                         while ((*p != '\0') && (*p != '/')) p++;
 385                                         if (*p == '\0') {
 386                                                 if (*q != '\0')
 387                                                         goto mismatch;
 388                                         } else {
 389                                                 p++;
 390                                         }
 391                                 }
 392                                 while((*q != '\0') && (*p != '\0') &&
 393                                       (*p != '/') && (*p == *q)) p++, q++;
 394                                 if (((*p != '\0') && *p != '/') || *q != '\0')
 395                                         goto mismatch;
 396                         }
 397                         card_index = i;
 398                         break;  /* done */
 399
 400                 mismatch:
 401                         j = 0; /* dummy stmt to shut up compiler */
 402                 }
 403         }
 404
 405         /*
 406           This reads the card's CONFIG tuple to find its configuration
 407           registers.
 408         */
 409         tuple.DesiredTuple = CISTPL_CONFIG;
 410         CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
 411         CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
 412         CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
 413         link->conf.ConfigBase = parse.config.base;
 414         link->conf.Present = parse.config.rmask[0];
 415
 416         /* Configure card */
 417         link->state |= DEV_CONFIG;
 418
 419         /*
 420           In this loop, we scan the CIS for configuration table entries,
 421           each of which describes a valid card configuration, including
 422           voltage, IO window, memory window, and interrupt settings.
 423
 424           We make no assumptions about the card to be configured: we use
 425           just the information available in the CIS.  In an ideal world,
 426           this would work for any PCMCIA card, but it requires a complete
 427           and accurate CIS.  In practice, a driver usually "knows" most of
 428           these things without consulting the CIS, and most client drivers
 429           will only use the CIS to fill in implementation-defined details.
 430         */
 431         tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
 432         CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
 433         while (1) {
 434                 cistpl_cftable_entry_t dflt = { 0 };
 435                 cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
 436                 if (pcmcia_get_tuple_data(handle, &tuple) != 0 ||
 437                                 pcmcia_parse_tuple(handle, &tuple, &parse) != 0)
 438                         goto next_entry;
 439
 440                 if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
 441                 if (cfg->index == 0) goto next_entry;
 442                 link->conf.ConfigIndex = cfg->index;
 443
 444                 /* Does this card need audio output? */
 445                 if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
 446                         link->conf.Attributes |= CONF_ENABLE_SPKR;
 447                         link->conf.Status = CCSR_AUDIO_ENA;
 448                 }
 449
 450                 /* Use power settings for Vcc and Vpp if present */
 451                 /*  Note that the CIS values need to be rescaled */
 452                 if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM))
 453                         link->conf.Vcc = cfg->vcc.param[CISTPL_POWER_VNOM]/10000;
 454                 else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM))
 455                         link->conf.Vcc = dflt.vcc.param[CISTPL_POWER_VNOM]/10000;
 456
 457                 if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
 458                         link->conf.Vpp1 = link->conf.Vpp2 =
 459                                 cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
 460                 else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
 461                         link->conf.Vpp1 = link->conf.Vpp2 =
 462                                 dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
 463
 464                 /* Do we need to allocate an interrupt? */
 465                 if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
 466                         link->conf.Attributes |= CONF_ENABLE_IRQ;
 467
 468                 /* IO window settings */
 469                 link->io.NumPorts1 = link->io.NumPorts2 = 0;
 470                 if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
 471                         cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
 472                         link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 473                         if (!(io->flags & CISTPL_IO_8BIT))
 474                                 link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
 475                         if (!(io->flags & CISTPL_IO_16BIT))
 476                                 link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 477                         link->io.BasePort1 = io->win[0].base;
 478                         link->io.NumPorts1 = io->win[0].len;
 479                         if (io->nwin > 1) {
 480                                 link->io.Attributes2 = link->io.Attributes1;
 481                                 link->io.BasePort2 = io->win[1].base;
 482                                 link->io.NumPorts2 = io->win[1].len;
 483                         }
 484                 }
 485
 486                 /* This reserves IO space but doesn't actually enable it */
 487                 if (pcmcia_request_io(link->handle, &link->io) != 0)
 488                         goto next_entry;
 489
 490                 /* If we got this far, we're cool! */
 491                 break;
 492
 493         next_entry:
 494                 CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple));
 495         }
 496
 497         /*
 498           Allocate an interrupt line.  Note that this does not assign a
 499           handler to the interrupt, unless the 'Handler' member of the
 500           irq structure is initialized.
 501         */
 502         if (link->conf.Attributes & CONF_ENABLE_IRQ)
 503                 CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
 504
 505         /*
 506           This actually configures the PCMCIA socket -- setting up
 507           the I/O windows and the interrupt mapping, and putting the
 508           card and host interface into "Memory and IO" mode.
 509         */
 510         CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf));
 511
 512         if (link->irq.AssignedIRQ == 0) {
 513                 printk(KERN_ALERT
 514                        "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
 515                 goto cs_failed;
 516         }
 517
 518         ((local_info_t*)link->priv)->eth_dev =
 519                 init_atmel_card(link->irq.AssignedIRQ,
 520                                 link->io.BasePort1,
 521                                 card_index == -1 ? ATMEL_FW_TYPE_NONE :  card_table[card_index].firmware,
 522                                 &handle_to_dev(handle),
 523                                 card_present,
 524                                 link);
 525         if (!((local_info_t*)link->priv)->eth_dev)
 526                 goto cs_failed;
 527
 528         /*
 529           At this point, the dev_node_t structure(s) need to be
 530           initialized and arranged in a linked list at link->dev.
 531         */
 532         strcpy(dev->node.dev_name, ((local_info_t*)link->priv)->eth_dev->name );
 533         dev->node.major = dev->node.minor = 0;
 534         link->dev = &dev->node;
 535
 536         /* Finally, report what we've done */
 537         printk(KERN_INFO "%s: %s%sindex 0x%02x: Vcc %d.%d",
 538                dev->node.dev_name,
 539                card_index == -1 ? "" :  card_table[card_index].name,
 540                card_index == -1 ? "" : " ",
 541                link->conf.ConfigIndex,
 542                link->conf.Vcc/10, link->conf.Vcc%10);
 543         if (link->conf.Vpp1)
 544                 printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
 545         if (link->conf.Attributes & CONF_ENABLE_IRQ)
 546                 printk(", irq %d", link->irq.AssignedIRQ);
 547         if (link->io.NumPorts1)
 548                 printk(", io 0x%04x-0x%04x", link->io.BasePort1,
 549                        link->io.BasePort1+link->io.NumPorts1-1);
 550         if (link->io.NumPorts2)
 551                 printk(" & 0x%04x-0x%04x", link->io.BasePort2,
 552                        link->io.BasePort2+link->io.NumPorts2-1);
 553         printk("\n");
 554
 555         link->state &= ~DEV_CONFIG_PENDING;
 556         return;
 557
 558  cs_failed:
 559         cs_error(link->handle, last_fn, last_ret);
 560         atmel_release(link);
 561 }
 562
 563 /*======================================================================
 564
 565   After a card is removed, atmel_release() will unregister the
 566   device, and release the PCMCIA configuration.  If the device is
 567   still open, this will be postponed until it is closed.
 568
 569   ======================================================================*/
 570
 571 static void atmel_release(dev_link_t *link)
 572 {
 573         struct net_device *dev = ((local_info_t*)link->priv)->eth_dev;
 574
 575         DEBUG(0, "atmel_release(0x%p)\n", link);
 576
 577         /* Unlink the device chain */
 578         link->dev = NULL;
 579
 580         if (dev)
 581                 stop_atmel_card(dev, 0);
 582         ((local_info_t*)link->priv)->eth_dev = NULL;
 583
 584         /* Don't bother checking to see if these succeed or not */
 585         pcmcia_release_configuration(link->handle);
 586         if (link->io.NumPorts1)
 587                 pcmcia_release_io(link->handle, &link->io);
 588         if (link->irq.AssignedIRQ)
 589                 pcmcia_release_irq(link->handle, &link->irq);
 590         link->state &= ~DEV_CONFIG;
 591 }
 592
 593 /*======================================================================
 594
 595   The card status event handler.  Mostly, this schedules other
 596   stuff to run after an event is received.
 597
 598   When a CARD_REMOVAL event is received, we immediately set a
 599   private flag to block future accesses to this device.  All the
 600   functions that actually access the device should check this flag
 601   to make sure the card is still present.
 602
 603   ======================================================================*/
 604
 605 static int atmel_event(event_t event, int priority,
 606                       event_callback_args_t *args)
 607 {
 608         dev_link_t *link = args->client_data;
 609         local_info_t *local = link->priv;
 610
 611         DEBUG(1, "atmel_event(0x%06x)\n", event);
 612
 613         switch (event) {
 614         case CS_EVENT_CARD_REMOVAL:
 615                 link->state &= ~DEV_PRESENT;
 616                 if (link->state & DEV_CONFIG) {
 617                         netif_device_detach(local->eth_dev);
 618                         atmel_release(link);
 619                 }
 620                 break;
 621         case CS_EVENT_CARD_INSERTION:
 622                 link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
 623                 atmel_config(link);
 624                 break;
 625         case CS_EVENT_PM_SUSPEND:
 626                 link->state |= DEV_SUSPEND;
 627                 /* Fall through... */
 628         case CS_EVENT_RESET_PHYSICAL:
 629                 if (link->state & DEV_CONFIG) {
 630                         netif_device_detach(local->eth_dev);
 631                         pcmcia_release_configuration(link->handle);
 632                 }
 633                 break;
 634         case CS_EVENT_PM_RESUME:
 635                 link->state &= ~DEV_SUSPEND;
 636                 /* Fall through... */
 637         case CS_EVENT_CARD_RESET:
 638                 if (link->state & DEV_CONFIG) {
 639                         pcmcia_request_configuration(link->handle, &link->conf);
 640                         atmel_open(local->eth_dev);
 641                         netif_device_attach(local->eth_dev);
 642                 }
 643                 break;
 644         }
 645         return 0;
 646 } /* atmel_event */
 647
 648 /*====================================================================*/
 649 static struct pcmcia_device_id atmel_ids[] = {
 650         PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0620),
 651         PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0696),
 652         PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x3302),
 653         PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0007),
 654         PCMCIA_DEVICE_PROD_ID12("11WAVE", "11WP611AL-E", 0x9eb2da1f, 0xc9a0d3f9),
 655         PCMCIA_DEVICE_PROD_ID12("ATMEL", "AT76C502AR", 0xabda4164, 0x41b37e1f),
 656         PCMCIA_DEVICE_PROD_ID12("ATMEL", "AT76C504", 0xabda4164, 0x5040670a),
 657         PCMCIA_DEVICE_PROD_ID12("ATMEL", "AT76C504A", 0xabda4164, 0xe15ed87f),
 658         PCMCIA_DEVICE_PROD_ID12("BT", "Voyager 1020 Laptop Adapter", 0xae49b86a, 0x1e957cd5),
 659         PCMCIA_DEVICE_PROD_ID12("CNet", "CNWLC 11Mbps Wireless PC Card V-5", 0xbc477dde, 0x502fae6b),
 660         PCMCIA_DEVICE_PROD_ID12("IEEE 802.11b", "Wireless LAN PC Card", 0x5b878724, 0x122f1df6),
 661         PCMCIA_DEVICE_PROD_ID12("OEM", "11Mbps Wireless LAN PC Card V-3", 0xfea54c90, 0x1c5b0f68),
 662         PCMCIA_DEVICE_PROD_ID12("SMC", "2632W", 0xc4f8b18b, 0x30f38774),
 663         PCMCIA_DEVICE_PROD_ID12("SMC", "2632W-V2", 0xc4f8b18b, 0x172d1377),
 664         PCMCIA_DEVICE_PROD_ID12("Wireless", "PC", 0xa407ecdd, 0x556e4d7e),
 665         PCMCIA_DEVICE_PROD_ID12("WLAN", "802.11b PC CARD", 0x575c516c, 0xb1f6dbc4),
 666         PCMCIA_DEVICE_NULL
 667 };
 668 MODULE_DEVICE_TABLE(pcmcia, atmel_ids);
 669
 670 static struct pcmcia_driver atmel_driver = {
 671         .owner          = THIS_MODULE,
 672         .drv            = {
 673                 .name   = "atmel_cs",
 674         },
 675         .attach         = atmel_attach,
 676         .detach         = atmel_detach,
 677         .id_table       = atmel_ids,
 678 };
 679
 680 static int atmel_cs_init(void)
 681 {
 682         return pcmcia_register_driver(&atmel_driver);
 683 }
 684
 685 static void atmel_cs_cleanup(void)
 686 {
 687         pcmcia_unregister_driver(&atmel_driver);
 688         BUG_ON(dev_list != NULL);
 689 }
 690
 691 /*
 692     This program is free software; you can redistribute it and/or
 693     modify it under the terms of the GNU General Public License
 694     as published by the Free Software Foundation; either version 2
 695     of the License, or (at your option) any later version.
 696
 697     This program is distributed in the hope that it will be useful,
 698     but WITHOUT ANY WARRANTY; without even the implied warranty of
 699     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 700     GNU General Public License for more details.
 701
 702     In addition:
 703
 704     Redistribution and use in source and binary forms, with or without
 705     modification, are permitted provided that the following conditions
 706     are met:
 707
 708     1. Redistributions of source code must retain the above copyright
 709        notice, this list of conditions and the following disclaimer.
 710     2. Redistributions in binary form must reproduce the above copyright
 711        notice, this list of conditions and the following disclaimer in the
 712        documentation and/or other materials provided with the distribution.
 713     3. The name of the author may not be used to endorse or promote
 714        products derived from this software without specific prior written
 715        permission.
 716
 717     THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 718     IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 719     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 720     ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
 721     INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 722     (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 723     SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 724     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 725     STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 726     IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 727     POSSIBILITY OF SUCH DAMAGE.
 728 */
 729
 730 module_init(atmel_cs_init);
 731 module_exit(atmel_cs_cleanup);