2 * Copyright (c) 2010 Broadcom Corporation
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
11 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
13 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
14 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
20 #include <linux/skbuff.h>
26 #define SDIOD_FBR_SIZE 0x100
29 #define SDIO_FUNC_ENABLE_1 0x02
30 #define SDIO_FUNC_ENABLE_2 0x04
33 #define SDIO_FUNC_READY_1 0x02
34 #define SDIO_FUNC_READY_2 0x04
37 #define INTR_STATUS_FUNC1 0x2
38 #define INTR_STATUS_FUNC2 0x4
40 /* Maximum number of I/O funcs */
41 #define SDIOD_MAX_IOFUNCS 7
43 /* as of sdiod rev 0, supports 3 functions */
44 #define SBSDIO_NUM_FUNCTION 3
46 /* function 1 miscellaneous registers */
48 /* sprom command and status */
49 #define SBSDIO_SPROM_CS 0x10000
50 /* sprom info register */
51 #define SBSDIO_SPROM_INFO 0x10001
52 /* sprom indirect access data byte 0 */
53 #define SBSDIO_SPROM_DATA_LOW 0x10002
54 /* sprom indirect access data byte 1 */
55 #define SBSDIO_SPROM_DATA_HIGH 0x10003
56 /* sprom indirect access addr byte 0 */
57 #define SBSDIO_SPROM_ADDR_LOW 0x10004
58 /* sprom indirect access addr byte 0 */
59 #define SBSDIO_SPROM_ADDR_HIGH 0x10005
60 /* xtal_pu (gpio) output */
61 #define SBSDIO_CHIP_CTRL_DATA 0x10006
62 /* xtal_pu (gpio) enable */
63 #define SBSDIO_CHIP_CTRL_EN 0x10007
64 /* rev < 7, watermark for sdio device */
65 #define SBSDIO_WATERMARK 0x10008
66 /* control busy signal generation */
67 #define SBSDIO_DEVICE_CTL 0x10009
69 /* SB Address Window Low (b15) */
70 #define SBSDIO_FUNC1_SBADDRLOW 0x1000A
71 /* SB Address Window Mid (b23:b16) */
72 #define SBSDIO_FUNC1_SBADDRMID 0x1000B
73 /* SB Address Window High (b31:b24) */
74 #define SBSDIO_FUNC1_SBADDRHIGH 0x1000C
75 /* Frame Control (frame term/abort) */
76 #define SBSDIO_FUNC1_FRAMECTRL 0x1000D
77 /* ChipClockCSR (ALP/HT ctl/status) */
78 #define SBSDIO_FUNC1_CHIPCLKCSR 0x1000E
79 /* SdioPullUp (on cmd, d0-d2) */
80 #define SBSDIO_FUNC1_SDIOPULLUP 0x1000F
81 /* Write Frame Byte Count Low */
82 #define SBSDIO_FUNC1_WFRAMEBCLO 0x10019
83 /* Write Frame Byte Count High */
84 #define SBSDIO_FUNC1_WFRAMEBCHI 0x1001A
85 /* Read Frame Byte Count Low */
86 #define SBSDIO_FUNC1_RFRAMEBCLO 0x1001B
87 /* Read Frame Byte Count High */
88 #define SBSDIO_FUNC1_RFRAMEBCHI 0x1001C
90 #define SBSDIO_FUNC1_MISC_REG_START 0x10000 /* f1 misc register start */
91 #define SBSDIO_FUNC1_MISC_REG_LIMIT 0x1001C /* f1 misc register end */
93 /* function 1 OCP space */
95 /* sb offset addr is <= 15 bits, 32k */
96 #define SBSDIO_SB_OFT_ADDR_MASK 0x07FFF
97 #define SBSDIO_SB_OFT_ADDR_LIMIT 0x08000
98 /* with b15, maps to 32-bit SB access */
99 #define SBSDIO_SB_ACCESS_2_4B_FLAG 0x08000
101 /* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
103 #define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid bits in SBADDRLOW */
104 #define SBSDIO_SBADDRMID_MASK 0xff /* Valid bits in SBADDRMID */
105 #define SBSDIO_SBADDRHIGH_MASK 0xffU /* Valid bits in SBADDRHIGH */
106 /* Address bits from SBADDR regs */
107 #define SBSDIO_SBWINDOW_MASK 0xffff8000
109 #define SDIOH_READ 0 /* Read request */
110 #define SDIOH_WRITE 1 /* Write request */
112 #define SDIOH_DATA_FIX 0 /* Fixed addressing */
113 #define SDIOH_DATA_INC 1 /* Incremental addressing */
115 /* internal return code */
125 struct brcmf_sdio_dev
{
126 struct sdio_func
*func
[SDIO_MAX_FUNCS
];
127 u8 num_funcs
; /* Supported funcs on client */
128 u32 func_cis_ptr
[SDIOD_MAX_IOFUNCS
];
129 u32 sbwad
; /* Save backplane window address */
130 bool regfail
; /* status of last reg_r/w call */
132 atomic_t suspend
; /* suspend flag */
133 wait_queue_head_t request_byte_wait
;
134 wait_queue_head_t request_word_wait
;
135 wait_queue_head_t request_packet_wait
;
136 wait_queue_head_t request_buffer_wait
;
140 /* Register/deregister device interrupt handler. */
142 brcmf_sdcard_intr_reg(struct brcmf_sdio_dev
*sdiodev
);
144 extern int brcmf_sdcard_intr_dereg(struct brcmf_sdio_dev
*sdiodev
);
146 /* Access SDIO address space (e.g. CCCR) using CMD52 (single-byte interface).
147 * fn: function number
148 * addr: unmodified SDIO-space address
149 * data: data byte to write
150 * err: pointer to error code (or NULL)
152 extern u8
brcmf_sdcard_cfg_read(struct brcmf_sdio_dev
*sdiodev
, uint func
,
154 extern void brcmf_sdcard_cfg_write(struct brcmf_sdio_dev
*sdiodev
, uint func
,
155 u32 addr
, u8 data
, int *err
);
157 /* Synchronous access to device (client) core registers via CMD53 to F1.
158 * addr: backplane address (i.e. >= regsva from attach)
159 * size: register width in bytes (2 or 4)
160 * data: data for register write
163 brcmf_sdcard_reg_read(struct brcmf_sdio_dev
*sdiodev
, u32 addr
, uint size
);
166 brcmf_sdcard_reg_write(struct brcmf_sdio_dev
*sdiodev
, u32 addr
, uint size
,
169 /* Indicate if last reg read/write failed */
170 extern bool brcmf_sdcard_regfail(struct brcmf_sdio_dev
*sdiodev
);
172 /* Buffer transfer to/from device (client) core via cmd53.
173 * fn: function number
174 * addr: backplane address (i.e. >= regsva from attach)
175 * flags: backplane width, address increment, sync/async
176 * buf: pointer to memory data buffer
177 * nbytes: number of bytes to transfer to/from buf
178 * pkt: pointer to packet associated with buf (if any)
179 * complete: callback function for command completion (async only)
180 * handle: handle for completion callback (first arg in callback)
181 * Returns 0 or error code.
182 * NOTE: Async operation is not currently supported.
185 brcmf_sdcard_send_pkt(struct brcmf_sdio_dev
*sdiodev
, u32 addr
, uint fn
,
186 uint flags
, struct sk_buff
*pkt
);
188 brcmf_sdcard_send_buf(struct brcmf_sdio_dev
*sdiodev
, u32 addr
, uint fn
,
189 uint flags
, u8
*buf
, uint nbytes
);
192 brcmf_sdcard_recv_pkt(struct brcmf_sdio_dev
*sdiodev
, u32 addr
, uint fn
,
193 uint flags
, struct sk_buff
*pkt
);
195 brcmf_sdcard_recv_buf(struct brcmf_sdio_dev
*sdiodev
, u32 addr
, uint fn
,
196 uint flags
, u8
*buf
, uint nbytes
);
198 brcmf_sdcard_recv_chain(struct brcmf_sdio_dev
*sdiodev
, u32 addr
, uint fn
,
199 uint flags
, struct sk_buff_head
*pktq
);
203 /* Four-byte target (backplane) width (vs. two-byte) */
204 #define SDIO_REQ_4BYTE 0x1
205 /* Fixed address (FIFO) (vs. incrementing address) */
206 #define SDIO_REQ_FIXED 0x2
207 /* Async request (vs. sync request) */
208 #define SDIO_REQ_ASYNC 0x4
210 /* Read/write to memory block (F1, no FIFO) via CMD53 (sync only).
211 * rw: read or write (0/1)
212 * addr: direct SDIO address
213 * buf: pointer to memory data buffer
214 * nbytes: number of bytes to transfer to/from buf
215 * Returns 0 or error code.
217 extern int brcmf_sdcard_rwdata(struct brcmf_sdio_dev
*sdiodev
, uint rw
,
218 u32 addr
, u8
*buf
, uint nbytes
);
220 /* Issue an abort to the specified function */
221 extern int brcmf_sdcard_abort(struct brcmf_sdio_dev
*sdiodev
, uint fn
);
223 /* platform specific/high level functions */
224 extern int brcmf_sdio_probe(struct brcmf_sdio_dev
*sdiodev
);
225 extern int brcmf_sdio_remove(struct brcmf_sdio_dev
*sdiodev
);
227 extern int brcmf_sdcard_set_sbaddr_window(struct brcmf_sdio_dev
*sdiodev
,
230 /* attach, return handler on success, NULL if failed.
231 * The handler shall be provided by all subsequent calls. No local cache
232 * cfghdl points to the starting address of pci device mapped memory
234 extern int brcmf_sdioh_attach(struct brcmf_sdio_dev
*sdiodev
);
235 extern void brcmf_sdioh_detach(struct brcmf_sdio_dev
*sdiodev
);
237 /* read or write one byte using cmd52 */
238 extern int brcmf_sdioh_request_byte(struct brcmf_sdio_dev
*sdiodev
, uint rw
,
239 uint fnc
, uint addr
, u8
*byte
);
241 /* read or write 2/4 bytes using cmd53 */
243 brcmf_sdioh_request_word(struct brcmf_sdio_dev
*sdiodev
,
244 uint rw
, uint fnc
, uint addr
,
245 u32
*word
, uint nbyte
);
247 /* read or write any buffer using cmd53 */
249 brcmf_sdioh_request_buffer(struct brcmf_sdio_dev
*sdiodev
,
250 uint fix_inc
, uint rw
, uint fnc_num
, u32 addr
,
251 u32 buflen
, u8
*buffer
, struct sk_buff
*pkt
);
253 brcmf_sdioh_request_chain(struct brcmf_sdio_dev
*sdiodev
, uint fix_inc
,
254 uint write
, uint func
, uint addr
,
255 struct sk_buff_head
*pktq
);
257 /* Watchdog timer interface for pm ops */
258 extern void brcmf_sdio_wdtmr_enable(struct brcmf_sdio_dev
*sdiodev
,
261 extern void *brcmf_sdbrcm_probe(u16 bus_no
, u16 slot
, u16 func
, uint bustype
,
262 u32 regsva
, struct brcmf_sdio_dev
*sdiodev
);
263 extern void brcmf_sdbrcm_disconnect(void *ptr
);
264 extern void brcmf_sdbrcm_isr(void *arg
);
265 #endif /* _BRCM_SDH_H_ */