Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee139...

[mirror_ubuntu-zesty-kernel.git] / drivers / net / wireless / brcm80211 / brcmsmac / mac80211_if.c

/*
 * Copyright (c) 2010 Broadcom Corporation
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#define __UNDEF_NO_VERSION__
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/etherdevice.h>
#include <linux/sched.h>
#include <linux/firmware.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/bcma/bcma.h>
#include <net/mac80211.h>
#include <defs.h>
#include "phy/phy_int.h"
#include "d11.h"
#include "channel.h"
#include "scb.h"
#include "pub.h"
#include "ucode_loader.h"
#include "mac80211_if.h"
#include "main.h"

#define N_TX_QUEUES     4 /* #tx queues on mac80211<->driver interface */

/* Flags we support */
#define MAC_FILTERS (FIF_PROMISC_IN_BSS | \
        FIF_ALLMULTI | \
        FIF_FCSFAIL | \
        FIF_CONTROL | \
        FIF_OTHER_BSS | \
        FIF_BCN_PRBRESP_PROMISC | \
        FIF_PSPOLL)

#define CHAN2GHZ(channel, freqency, chflags)  { \
        .band = IEEE80211_BAND_2GHZ, \
        .center_freq = (freqency), \
        .hw_value = (channel), \
        .flags = chflags, \
        .max_antenna_gain = 0, \
        .max_power = 19, \
}

#define CHAN5GHZ(channel, chflags)  { \
        .band = IEEE80211_BAND_5GHZ, \
        .center_freq = 5000 + 5*(channel), \
        .hw_value = (channel), \
        .flags = chflags, \
        .max_antenna_gain = 0, \
        .max_power = 21, \
}

#define RATE(rate100m, _flags) { \
        .bitrate = (rate100m), \
        .flags = (_flags), \
        .hw_value = (rate100m / 5), \
}

struct firmware_hdr {
        __le32 offset;
        __le32 len;
        __le32 idx;
};

static const char * const brcms_firmwares[MAX_FW_IMAGES] = {
        "brcm/bcm43xx",
        NULL
};

static int n_adapters_found;

MODULE_AUTHOR("Broadcom Corporation");
MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN driver.");
MODULE_SUPPORTED_DEVICE("Broadcom 802.11n WLAN cards");
MODULE_LICENSE("Dual BSD/GPL");


/* recognized BCMA Core IDs */
static struct bcma_device_id brcms_coreid_table[] = {
        BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 23, BCMA_ANY_CLASS),
        BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 24, BCMA_ANY_CLASS),
        BCMA_CORETABLE_END
};
MODULE_DEVICE_TABLE(bcma, brcms_coreid_table);

#ifdef DEBUG
static int msglevel = 0xdeadbeef;
module_param(msglevel, int, 0);
#endif                          /* DEBUG */

static struct ieee80211_channel brcms_2ghz_chantable[] = {
        CHAN2GHZ(1, 2412, IEEE80211_CHAN_NO_HT40MINUS),
        CHAN2GHZ(2, 2417, IEEE80211_CHAN_NO_HT40MINUS),
        CHAN2GHZ(3, 2422, IEEE80211_CHAN_NO_HT40MINUS),
        CHAN2GHZ(4, 2427, IEEE80211_CHAN_NO_HT40MINUS),
        CHAN2GHZ(5, 2432, 0),
        CHAN2GHZ(6, 2437, 0),
        CHAN2GHZ(7, 2442, 0),
        CHAN2GHZ(8, 2447, IEEE80211_CHAN_NO_HT40PLUS),
        CHAN2GHZ(9, 2452, IEEE80211_CHAN_NO_HT40PLUS),
        CHAN2GHZ(10, 2457, IEEE80211_CHAN_NO_HT40PLUS),
        CHAN2GHZ(11, 2462, IEEE80211_CHAN_NO_HT40PLUS),
        CHAN2GHZ(12, 2467,
                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
                 IEEE80211_CHAN_NO_HT40PLUS),
        CHAN2GHZ(13, 2472,
                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
                 IEEE80211_CHAN_NO_HT40PLUS),
        CHAN2GHZ(14, 2484,
                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
                 IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
};

static struct ieee80211_channel brcms_5ghz_nphy_chantable[] = {
        /* UNII-1 */
        CHAN5GHZ(36, IEEE80211_CHAN_NO_HT40MINUS),
        CHAN5GHZ(40, IEEE80211_CHAN_NO_HT40PLUS),
        CHAN5GHZ(44, IEEE80211_CHAN_NO_HT40MINUS),
        CHAN5GHZ(48, IEEE80211_CHAN_NO_HT40PLUS),
        /* UNII-2 */
        CHAN5GHZ(52,
                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
        CHAN5GHZ(56,
                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
        CHAN5GHZ(60,
                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
        CHAN5GHZ(64,
                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
        /* MID */
        CHAN5GHZ(100,
                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
        CHAN5GHZ(104,
                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
        CHAN5GHZ(108,
                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
        CHAN5GHZ(112,
                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
        CHAN5GHZ(116,
                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
        CHAN5GHZ(120,
                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
        CHAN5GHZ(124,
                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
        CHAN5GHZ(128,
                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
        CHAN5GHZ(132,
                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
        CHAN5GHZ(136,
                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
        CHAN5GHZ(140,
                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS |
                 IEEE80211_CHAN_NO_HT40MINUS),
        /* UNII-3 */
        CHAN5GHZ(149, IEEE80211_CHAN_NO_HT40MINUS),
        CHAN5GHZ(153, IEEE80211_CHAN_NO_HT40PLUS),
        CHAN5GHZ(157, IEEE80211_CHAN_NO_HT40MINUS),
        CHAN5GHZ(161, IEEE80211_CHAN_NO_HT40PLUS),
        CHAN5GHZ(165, IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
};

/*
 * The rate table is used for both 2.4G and 5G rates. The
 * latter being a subset as it does not support CCK rates.
 */
static struct ieee80211_rate legacy_ratetable[] = {
        RATE(10, 0),
        RATE(20, IEEE80211_RATE_SHORT_PREAMBLE),
        RATE(55, IEEE80211_RATE_SHORT_PREAMBLE),
        RATE(110, IEEE80211_RATE_SHORT_PREAMBLE),
        RATE(60, 0),
        RATE(90, 0),
        RATE(120, 0),
        RATE(180, 0),
        RATE(240, 0),
        RATE(360, 0),
        RATE(480, 0),
        RATE(540, 0),
};

static const struct ieee80211_supported_band brcms_band_2GHz_nphy_template = {
        .band = IEEE80211_BAND_2GHZ,
        .channels = brcms_2ghz_chantable,
        .n_channels = ARRAY_SIZE(brcms_2ghz_chantable),
        .bitrates = legacy_ratetable,
        .n_bitrates = ARRAY_SIZE(legacy_ratetable),
        .ht_cap = {
                   /* from include/linux/ieee80211.h */
                   .cap = IEEE80211_HT_CAP_GRN_FLD |
                          IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40,
                   .ht_supported = true,
                   .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
                   .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
                   .mcs = {
                           /* placeholders for now */
                           .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0},
                           .rx_highest = cpu_to_le16(500),
                           .tx_params = IEEE80211_HT_MCS_TX_DEFINED}
                   }
};

static const struct ieee80211_supported_band brcms_band_5GHz_nphy_template = {
        .band = IEEE80211_BAND_5GHZ,
        .channels = brcms_5ghz_nphy_chantable,
        .n_channels = ARRAY_SIZE(brcms_5ghz_nphy_chantable),
        .bitrates = legacy_ratetable + BRCMS_LEGACY_5G_RATE_OFFSET,
        .n_bitrates = ARRAY_SIZE(legacy_ratetable) -
                        BRCMS_LEGACY_5G_RATE_OFFSET,
        .ht_cap = {
                   .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 |
                          IEEE80211_HT_CAP_SGI_40,
                   .ht_supported = true,
                   .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
                   .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
                   .mcs = {
                           /* placeholders for now */
                           .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0},
                           .rx_highest = cpu_to_le16(500),
                           .tx_params = IEEE80211_HT_MCS_TX_DEFINED}
                   }
};

/* flags the given rate in rateset as requested */
static void brcms_set_basic_rate(struct brcm_rateset *rs, u16 rate, bool is_br)
{
        u32 i;

        for (i = 0; i < rs->count; i++) {
                if (rate != (rs->rates[i] & 0x7f))
                        continue;

                if (is_br)
                        rs->rates[i] |= BRCMS_RATE_FLAG;
                else
                        rs->rates[i] &= BRCMS_RATE_MASK;
                return;
        }
}

static void brcms_ops_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
        struct brcms_info *wl = hw->priv;

        spin_lock_bh(&wl->lock);
        if (!wl->pub->up) {
                wiphy_err(wl->wiphy, "ops->tx called while down\n");
                kfree_skb(skb);
                goto done;
        }
        brcms_c_sendpkt_mac80211(wl->wlc, skb, hw);
 done:
        spin_unlock_bh(&wl->lock);
}

static int brcms_ops_start(struct ieee80211_hw *hw)
{
        struct brcms_info *wl = hw->priv;
        bool blocked;
        int err;

        ieee80211_wake_queues(hw);
        spin_lock_bh(&wl->lock);
        blocked = brcms_rfkill_set_hw_state(wl);
        spin_unlock_bh(&wl->lock);
        if (!blocked)
                wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);

        spin_lock_bh(&wl->lock);
        /* avoid acknowledging frames before a non-monitor device is added */
        wl->mute_tx = true;

        if (!wl->pub->up)
                err = brcms_up(wl);
        else
                err = -ENODEV;
        spin_unlock_bh(&wl->lock);

        if (err != 0)
                wiphy_err(hw->wiphy, "%s: brcms_up() returned %d\n", __func__,
                          err);
        return err;
}

static void brcms_ops_stop(struct ieee80211_hw *hw)
{
        struct brcms_info *wl = hw->priv;
        int status;

        ieee80211_stop_queues(hw);

        if (wl->wlc == NULL)
                return;

        spin_lock_bh(&wl->lock);
        status = brcms_c_chipmatch(wl->wlc->hw->vendorid,
                                   wl->wlc->hw->deviceid);
        spin_unlock_bh(&wl->lock);
        if (!status) {
                wiphy_err(wl->wiphy,
                          "wl: brcms_ops_stop: chipmatch failed\n");
                return;
        }

        /* put driver in down state */
        spin_lock_bh(&wl->lock);
        brcms_down(wl);
        spin_unlock_bh(&wl->lock);
}

static int
brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
{
        struct brcms_info *wl = hw->priv;

        /* Just STA for now */
        if (vif->type != NL80211_IFTYPE_STATION) {
                wiphy_err(hw->wiphy, "%s: Attempt to add type %d, only"
                          " STA for now\n", __func__, vif->type);
                return -EOPNOTSUPP;
        }

        wl->mute_tx = false;
        brcms_c_mute(wl->wlc, false);

        return 0;
}

static void
brcms_ops_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
{
}

static int brcms_ops_config(struct ieee80211_hw *hw, u32 changed)
{
        struct ieee80211_conf *conf = &hw->conf;
        struct brcms_info *wl = hw->priv;
        int err = 0;
        int new_int;
        struct wiphy *wiphy = hw->wiphy;

        spin_lock_bh(&wl->lock);
        if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) {
                brcms_c_set_beacon_listen_interval(wl->wlc,
                                                   conf->listen_interval);
        }
        if (changed & IEEE80211_CONF_CHANGE_MONITOR)
                wiphy_dbg(wiphy, "%s: change monitor mode: %s\n",
                          __func__, conf->flags & IEEE80211_CONF_MONITOR ?
                          "true" : "false");
        if (changed & IEEE80211_CONF_CHANGE_PS)
                wiphy_err(wiphy, "%s: change power-save mode: %s (implement)\n",
                          __func__, conf->flags & IEEE80211_CONF_PS ?
                          "true" : "false");

        if (changed & IEEE80211_CONF_CHANGE_POWER) {
                err = brcms_c_set_tx_power(wl->wlc, conf->power_level);
                if (err < 0) {
                        wiphy_err(wiphy, "%s: Error setting power_level\n",
                                  __func__);
                        goto config_out;
                }
                new_int = brcms_c_get_tx_power(wl->wlc);
                if (new_int != conf->power_level)
                        wiphy_err(wiphy, "%s: Power level req != actual, %d %d"
                                  "\n", __func__, conf->power_level,
                                  new_int);
        }
        if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
                if (conf->channel_type == NL80211_CHAN_HT20 ||
                    conf->channel_type == NL80211_CHAN_NO_HT)
                        err = brcms_c_set_channel(wl->wlc,
                                                  conf->channel->hw_value);
                else
                        err = -ENOTSUPP;
        }
        if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
                err = brcms_c_set_rate_limit(wl->wlc,
                                             conf->short_frame_max_tx_count,
                                             conf->long_frame_max_tx_count);

 config_out:
        spin_unlock_bh(&wl->lock);
        return err;
}

static void
brcms_ops_bss_info_changed(struct ieee80211_hw *hw,
                        struct ieee80211_vif *vif,
                        struct ieee80211_bss_conf *info, u32 changed)
{
        struct brcms_info *wl = hw->priv;
        struct wiphy *wiphy = hw->wiphy;

        if (changed & BSS_CHANGED_ASSOC) {
                /* association status changed (associated/disassociated)
                 * also implies a change in the AID.
                 */
                wiphy_err(wiphy, "%s: %s: %sassociated\n", KBUILD_MODNAME,
                          __func__, info->assoc ? "" : "dis");
                spin_lock_bh(&wl->lock);
                brcms_c_associate_upd(wl->wlc, info->assoc);
                spin_unlock_bh(&wl->lock);
        }
        if (changed & BSS_CHANGED_ERP_SLOT) {
                s8 val;

                /* slot timing changed */
                if (info->use_short_slot)
                        val = 1;
                else
                        val = 0;
                spin_lock_bh(&wl->lock);
                brcms_c_set_shortslot_override(wl->wlc, val);
                spin_unlock_bh(&wl->lock);
        }

        if (changed & BSS_CHANGED_HT) {
                /* 802.11n parameters changed */
                u16 mode = info->ht_operation_mode;

                spin_lock_bh(&wl->lock);
                brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_CFG,
                        mode & IEEE80211_HT_OP_MODE_PROTECTION);
                brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_NONGF,
                        mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
                brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_OBSS,
                        mode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT);
                spin_unlock_bh(&wl->lock);
        }
        if (changed & BSS_CHANGED_BASIC_RATES) {
                struct ieee80211_supported_band *bi;
                u32 br_mask, i;
                u16 rate;
                struct brcm_rateset rs;
                int error;

                /* retrieve the current rates */
                spin_lock_bh(&wl->lock);
                brcms_c_get_current_rateset(wl->wlc, &rs);
                spin_unlock_bh(&wl->lock);

                br_mask = info->basic_rates;
                bi = hw->wiphy->bands[brcms_c_get_curband(wl->wlc)];
                for (i = 0; i < bi->n_bitrates; i++) {
                        /* convert to internal rate value */
                        rate = (bi->bitrates[i].bitrate << 1) / 10;

                        /* set/clear basic rate flag */
                        brcms_set_basic_rate(&rs, rate, br_mask & 1);
                        br_mask >>= 1;
                }

                /* update the rate set */
                spin_lock_bh(&wl->lock);
                error = brcms_c_set_rateset(wl->wlc, &rs);
                spin_unlock_bh(&wl->lock);
                if (error)
                        wiphy_err(wiphy, "changing basic rates failed: %d\n",
                                  error);
        }
        if (changed & BSS_CHANGED_BEACON_INT) {
                /* Beacon interval changed */
                spin_lock_bh(&wl->lock);
                brcms_c_set_beacon_period(wl->wlc, info->beacon_int);
                spin_unlock_bh(&wl->lock);
        }
        if (changed & BSS_CHANGED_BSSID) {
                /* BSSID changed, for whatever reason (IBSS and managed mode) */
                spin_lock_bh(&wl->lock);
                brcms_c_set_addrmatch(wl->wlc, RCM_BSSID_OFFSET, info->bssid);
                spin_unlock_bh(&wl->lock);
        }
        if (changed & BSS_CHANGED_BEACON)
                /* Beacon data changed, retrieve new beacon (beaconing modes) */
                wiphy_err(wiphy, "%s: beacon changed\n", __func__);

        if (changed & BSS_CHANGED_BEACON_ENABLED) {
                /* Beaconing should be enabled/disabled (beaconing modes) */
                wiphy_err(wiphy, "%s: Beacon enabled: %s\n", __func__,
                          info->enable_beacon ? "true" : "false");
        }

        if (changed & BSS_CHANGED_CQM) {
                /* Connection quality monitor config changed */
                wiphy_err(wiphy, "%s: cqm change: threshold %d, hys %d "
                          " (implement)\n", __func__, info->cqm_rssi_thold,
                          info->cqm_rssi_hyst);
        }

        if (changed & BSS_CHANGED_IBSS) {
                /* IBSS join status changed */
                wiphy_err(wiphy, "%s: IBSS joined: %s (implement)\n", __func__,
                          info->ibss_joined ? "true" : "false");
        }

        if (changed & BSS_CHANGED_ARP_FILTER) {
                /* Hardware ARP filter address list or state changed */
                wiphy_err(wiphy, "%s: arp filtering: enabled %s, count %d"
                          " (implement)\n", __func__, info->arp_filter_enabled ?
                          "true" : "false", info->arp_addr_cnt);
        }

        if (changed & BSS_CHANGED_QOS) {
                /*
                 * QoS for this association was enabled/disabled.
                 * Note that it is only ever disabled for station mode.
                 */
                wiphy_err(wiphy, "%s: qos enabled: %s (implement)\n", __func__,
                          info->qos ? "true" : "false");
        }
        return;
}

static void
brcms_ops_configure_filter(struct ieee80211_hw *hw,
                        unsigned int changed_flags,
                        unsigned int *total_flags, u64 multicast)
{
        struct brcms_info *wl = hw->priv;
        struct wiphy *wiphy = hw->wiphy;

        changed_flags &= MAC_FILTERS;
        *total_flags &= MAC_FILTERS;

        if (changed_flags & FIF_PROMISC_IN_BSS)
                wiphy_dbg(wiphy, "FIF_PROMISC_IN_BSS\n");
        if (changed_flags & FIF_ALLMULTI)
                wiphy_dbg(wiphy, "FIF_ALLMULTI\n");
        if (changed_flags & FIF_FCSFAIL)
                wiphy_dbg(wiphy, "FIF_FCSFAIL\n");
        if (changed_flags & FIF_CONTROL)
                wiphy_dbg(wiphy, "FIF_CONTROL\n");
        if (changed_flags & FIF_OTHER_BSS)
                wiphy_dbg(wiphy, "FIF_OTHER_BSS\n");
        if (changed_flags & FIF_PSPOLL)
                wiphy_dbg(wiphy, "FIF_PSPOLL\n");
        if (changed_flags & FIF_BCN_PRBRESP_PROMISC)
                wiphy_dbg(wiphy, "FIF_BCN_PRBRESP_PROMISC\n");

        spin_lock_bh(&wl->lock);
        brcms_c_mac_promisc(wl->wlc, *total_flags);
        spin_unlock_bh(&wl->lock);
        return;
}

static void brcms_ops_sw_scan_start(struct ieee80211_hw *hw)
{
        struct brcms_info *wl = hw->priv;
        spin_lock_bh(&wl->lock);
        brcms_c_scan_start(wl->wlc);
        spin_unlock_bh(&wl->lock);
        return;
}

static void brcms_ops_sw_scan_complete(struct ieee80211_hw *hw)
{
        struct brcms_info *wl = hw->priv;
        spin_lock_bh(&wl->lock);
        brcms_c_scan_stop(wl->wlc);
        spin_unlock_bh(&wl->lock);
        return;
}

static int
brcms_ops_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue,
                  const struct ieee80211_tx_queue_params *params)
{
        struct brcms_info *wl = hw->priv;

        spin_lock_bh(&wl->lock);
        brcms_c_wme_setparams(wl->wlc, queue, params, true);
        spin_unlock_bh(&wl->lock);

        return 0;
}

static int
brcms_ops_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
               struct ieee80211_sta *sta)
{
        struct brcms_info *wl = hw->priv;
        struct scb *scb = &wl->wlc->pri_scb;

        brcms_c_init_scb(scb);

        wl->pub->global_ampdu = &(scb->scb_ampdu);
        wl->pub->global_ampdu->scb = scb;
        wl->pub->global_ampdu->max_pdu = 16;

        /*
         * minstrel_ht initiates addBA on our behalf by calling
         * ieee80211_start_tx_ba_session()
         */
        return 0;
}

static int
brcms_ops_ampdu_action(struct ieee80211_hw *hw,
                    struct ieee80211_vif *vif,
                    enum ieee80211_ampdu_mlme_action action,
                    struct ieee80211_sta *sta, u16 tid, u16 *ssn,
                    u8 buf_size)
{
        struct brcms_info *wl = hw->priv;
        struct scb *scb = &wl->wlc->pri_scb;
        int status;

        if (WARN_ON(scb->magic != SCB_MAGIC))
                return -EIDRM;
        switch (action) {
        case IEEE80211_AMPDU_RX_START:
                break;
        case IEEE80211_AMPDU_RX_STOP:
                break;
        case IEEE80211_AMPDU_TX_START:
                spin_lock_bh(&wl->lock);
                status = brcms_c_aggregatable(wl->wlc, tid);
                spin_unlock_bh(&wl->lock);
                if (!status) {
                        wiphy_err(wl->wiphy, "START: tid %d is not agg\'able\n",
                                  tid);
                        return -EINVAL;
                }
                ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
                break;

        case IEEE80211_AMPDU_TX_STOP:
                spin_lock_bh(&wl->lock);
                brcms_c_ampdu_flush(wl->wlc, sta, tid);
                spin_unlock_bh(&wl->lock);
                ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
                break;
        case IEEE80211_AMPDU_TX_OPERATIONAL:
                /*
                 * BA window size from ADDBA response ('buf_size') defines how
                 * many outstanding MPDUs are allowed for the BA stream by
                 * recipient and traffic class. 'ampdu_factor' gives maximum
                 * AMPDU size.
                 */
                spin_lock_bh(&wl->lock);
                brcms_c_ampdu_tx_operational(wl->wlc, tid, buf_size,
                        (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
                         sta->ht_cap.ampdu_factor)) - 1);
                spin_unlock_bh(&wl->lock);
                /* Power save wakeup */
                break;
        default:
                wiphy_err(wl->wiphy, "%s: Invalid command, ignoring\n",
                          __func__);
        }

        return 0;
}

static void brcms_ops_rfkill_poll(struct ieee80211_hw *hw)
{
        struct brcms_info *wl = hw->priv;
        bool blocked;

        spin_lock_bh(&wl->lock);
        blocked = brcms_c_check_radio_disabled(wl->wlc);
        spin_unlock_bh(&wl->lock);

        wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
}

static void brcms_ops_flush(struct ieee80211_hw *hw, bool drop)
{
        struct brcms_info *wl = hw->priv;

        no_printk("%s: drop = %s\n", __func__, drop ? "true" : "false");

        /* wait for packet queue and dma fifos to run empty */
        spin_lock_bh(&wl->lock);
        brcms_c_wait_for_tx_completion(wl->wlc, drop);
        spin_unlock_bh(&wl->lock);
}

static const struct ieee80211_ops brcms_ops = {
        .tx = brcms_ops_tx,
        .start = brcms_ops_start,
        .stop = brcms_ops_stop,
        .add_interface = brcms_ops_add_interface,
        .remove_interface = brcms_ops_remove_interface,
        .config = brcms_ops_config,
        .bss_info_changed = brcms_ops_bss_info_changed,
        .configure_filter = brcms_ops_configure_filter,
        .sw_scan_start = brcms_ops_sw_scan_start,
        .sw_scan_complete = brcms_ops_sw_scan_complete,
        .conf_tx = brcms_ops_conf_tx,
        .sta_add = brcms_ops_sta_add,
        .ampdu_action = brcms_ops_ampdu_action,
        .rfkill_poll = brcms_ops_rfkill_poll,
        .flush = brcms_ops_flush,
};

/*
 * is called in brcms_bcma_probe() context, therefore no locking required.
 */
static int brcms_set_hint(struct brcms_info *wl, char *abbrev)
{
        return regulatory_hint(wl->pub->ieee_hw->wiphy, abbrev);
}

void brcms_dpc(unsigned long data)
{
        struct brcms_info *wl;

        wl = (struct brcms_info *) data;

        spin_lock_bh(&wl->lock);

        /* call the common second level interrupt handler */
        if (wl->pub->up) {
                if (wl->resched) {
                        unsigned long flags;

                        spin_lock_irqsave(&wl->isr_lock, flags);
                        brcms_c_intrsupd(wl->wlc);
                        spin_unlock_irqrestore(&wl->isr_lock, flags);
                }

                wl->resched = brcms_c_dpc(wl->wlc, true);
        }

        /* brcms_c_dpc() may bring the driver down */
        if (!wl->pub->up)
                goto done;

        /* re-schedule dpc */
        if (wl->resched)
                tasklet_schedule(&wl->tasklet);
        else
                /* re-enable interrupts */
                brcms_intrson(wl);

 done:
        spin_unlock_bh(&wl->lock);
}

/*
 * Precondition: Since this function is called in brcms_pci_probe() context,
 * no locking is required.
 */
static int brcms_request_fw(struct brcms_info *wl, struct bcma_device *pdev)
{
        int status;
        struct device *device = &pdev->dev;
        char fw_name[100];
        int i;

        memset(&wl->fw, 0, sizeof(struct brcms_firmware));
        for (i = 0; i < MAX_FW_IMAGES; i++) {
                if (brcms_firmwares[i] == NULL)
                        break;
                sprintf(fw_name, "%s-%d.fw", brcms_firmwares[i],
                        UCODE_LOADER_API_VER);
                status = request_firmware(&wl->fw.fw_bin[i], fw_name, device);
                if (status) {
                        wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n",
                                  KBUILD_MODNAME, fw_name);
                        return status;
                }
                sprintf(fw_name, "%s_hdr-%d.fw", brcms_firmwares[i],
                        UCODE_LOADER_API_VER);
                status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device);
                if (status) {
                        wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n",
                                  KBUILD_MODNAME, fw_name);
                        return status;
                }
                wl->fw.hdr_num_entries[i] =
                    wl->fw.fw_hdr[i]->size / (sizeof(struct firmware_hdr));
        }
        wl->fw.fw_cnt = i;
        return brcms_ucode_data_init(wl, &wl->ucode);
}

/*
 * Precondition: Since this function is called in brcms_pci_probe() context,
 * no locking is required.
 */
static void brcms_release_fw(struct brcms_info *wl)
{
        int i;
        for (i = 0; i < MAX_FW_IMAGES; i++) {
                release_firmware(wl->fw.fw_bin[i]);
                release_firmware(wl->fw.fw_hdr[i]);
        }
}

/**
 * This function frees the WL per-device resources.
 *
 * This function frees resources owned by the WL device pointed to
 * by the wl parameter.
 *
 * precondition: can both be called locked and unlocked
 *
 */
static void brcms_free(struct brcms_info *wl)
{
        struct brcms_timer *t, *next;

        /* free ucode data */
        if (wl->fw.fw_cnt)
                brcms_ucode_data_free(&wl->ucode);
        if (wl->irq)
                free_irq(wl->irq, wl);

        /* kill dpc */
        tasklet_kill(&wl->tasklet);

        if (wl->pub)
                brcms_c_module_unregister(wl->pub, "linux", wl);

        /* free common resources */
        if (wl->wlc) {
                brcms_c_detach(wl->wlc);
                wl->wlc = NULL;
                wl->pub = NULL;
        }

        /* virtual interface deletion is deferred so we cannot spinwait */

        /* wait for all pending callbacks to complete */
        while (atomic_read(&wl->callbacks) > 0)
                schedule();

        /* free timers */
        for (t = wl->timers; t; t = next) {
                next = t->next;
#ifdef DEBUG
                kfree(t->name);
#endif
                kfree(t);
        }
}

/*
* called from both kernel as from this kernel module (error flow on attach)
* precondition: perimeter lock is not acquired.
*/
static void brcms_remove(struct bcma_device *pdev)
{
        struct ieee80211_hw *hw = bcma_get_drvdata(pdev);
        struct brcms_info *wl = hw->priv;

        if (wl->wlc) {
                wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, false);
                wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
                ieee80211_unregister_hw(hw);
        }

        brcms_free(wl);

        bcma_set_drvdata(pdev, NULL);
        ieee80211_free_hw(hw);
}

static irqreturn_t brcms_isr(int irq, void *dev_id)
{
        struct brcms_info *wl;
        bool ours, wantdpc;

        wl = (struct brcms_info *) dev_id;

        spin_lock(&wl->isr_lock);

        /* call common first level interrupt handler */
        ours = brcms_c_isr(wl->wlc, &wantdpc);
        if (ours) {
                /* if more to do... */
                if (wantdpc) {

                        /* ...and call the second level interrupt handler */
                        /* schedule dpc */
                        tasklet_schedule(&wl->tasklet);
                }
        }

        spin_unlock(&wl->isr_lock);

        return IRQ_RETVAL(ours);
}

/*
 * is called in brcms_pci_probe() context, therefore no locking required.
 */
static int ieee_hw_rate_init(struct ieee80211_hw *hw)
{
        struct brcms_info *wl = hw->priv;
        struct brcms_c_info *wlc = wl->wlc;
        struct ieee80211_supported_band *band;
        int has_5g = 0;
        u16 phy_type;

        hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
        hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;

        phy_type = brcms_c_get_phy_type(wl->wlc, 0);
        if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) {
                band = &wlc->bandstate[BAND_2G_INDEX]->band;
                *band = brcms_band_2GHz_nphy_template;
                if (phy_type == PHY_TYPE_LCN) {
                        /* Single stream */
                        band->ht_cap.mcs.rx_mask[1] = 0;
                        band->ht_cap.mcs.rx_highest = cpu_to_le16(72);
                }
                hw->wiphy->bands[IEEE80211_BAND_2GHZ] = band;
        } else {
                return -EPERM;
        }

        /* Assume all bands use the same phy.  True for 11n devices. */
        if (wl->pub->_nbands > 1) {
                has_5g++;
                if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) {
                        band = &wlc->bandstate[BAND_5G_INDEX]->band;
                        *band = brcms_band_5GHz_nphy_template;
                        hw->wiphy->bands[IEEE80211_BAND_5GHZ] = band;
                } else {
                        return -EPERM;
                }
        }
        return 0;
}

/*
 * is called in brcms_pci_probe() context, therefore no locking required.
 */
static int ieee_hw_init(struct ieee80211_hw *hw)
{
        hw->flags = IEEE80211_HW_SIGNAL_DBM
            /* | IEEE80211_HW_CONNECTION_MONITOR  What is this? */
            | IEEE80211_HW_REPORTS_TX_ACK_STATUS
            | IEEE80211_HW_AMPDU_AGGREGATION;

        hw->extra_tx_headroom = brcms_c_get_header_len();
        hw->queues = N_TX_QUEUES;
        hw->max_rates = 2;      /* Primary rate and 1 fallback rate */

        /* channel change time is dependent on chip and band  */
        hw->channel_change_time = 7 * 1000;
        hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);

        hw->rate_control_algorithm = "minstrel_ht";

        hw->sta_data_size = 0;
        return ieee_hw_rate_init(hw);
}

/**
 * attach to the WL device.
 *
 * Attach to the WL device identified by vendor and device parameters.
 * regs is a host accessible memory address pointing to WL device registers.
 *
 * brcms_attach is not defined as static because in the case where no bus
 * is defined, wl_attach will never be called, and thus, gcc will issue
 * a warning that this function is defined but not used if we declare
 * it as static.
 *
 *
 * is called in brcms_bcma_probe() context, therefore no locking required.
 */
static struct brcms_info *brcms_attach(struct bcma_device *pdev)
{
        struct brcms_info *wl = NULL;
        int unit, err;
        struct ieee80211_hw *hw;
        u8 perm[ETH_ALEN];

        unit = n_adapters_found;
        err = 0;

        if (unit < 0)
                return NULL;

        /* allocate private info */
        hw = bcma_get_drvdata(pdev);
        if (hw != NULL)
                wl = hw->priv;
        if (WARN_ON(hw == NULL) || WARN_ON(wl == NULL))
                return NULL;
        wl->wiphy = hw->wiphy;

        atomic_set(&wl->callbacks, 0);

        /* setup the bottom half handler */
        tasklet_init(&wl->tasklet, brcms_dpc, (unsigned long) wl);

        spin_lock_init(&wl->lock);
        spin_lock_init(&wl->isr_lock);

        /* prepare ucode */
        if (brcms_request_fw(wl, pdev) < 0) {
                wiphy_err(wl->wiphy, "%s: Failed to find firmware usually in "
                          "%s\n", KBUILD_MODNAME, "/lib/firmware/brcm");
                brcms_release_fw(wl);
                brcms_remove(pdev);
                return NULL;
        }

        /* common load-time initialization */
        wl->wlc = brcms_c_attach((void *)wl, pdev, unit, false, &err);
        brcms_release_fw(wl);
        if (!wl->wlc) {
                wiphy_err(wl->wiphy, "%s: attach() failed with code %d\n",
                          KBUILD_MODNAME, err);
                goto fail;
        }
        wl->pub = brcms_c_pub(wl->wlc);

        wl->pub->ieee_hw = hw;

        /* register our interrupt handler */
        if (request_irq(pdev->irq, brcms_isr,
                        IRQF_SHARED, KBUILD_MODNAME, wl)) {
                wiphy_err(wl->wiphy, "wl%d: request_irq() failed\n", unit);
                goto fail;
        }
        wl->irq = pdev->irq;

        /* register module */
        brcms_c_module_register(wl->pub, "linux", wl, NULL);

        if (ieee_hw_init(hw)) {
                wiphy_err(wl->wiphy, "wl%d: %s: ieee_hw_init failed!\n", unit,
                          __func__);
                goto fail;
        }

        memcpy(perm, &wl->pub->cur_etheraddr, ETH_ALEN);
        if (WARN_ON(!is_valid_ether_addr(perm)))
                goto fail;
        SET_IEEE80211_PERM_ADDR(hw, perm);

        err = ieee80211_register_hw(hw);
        if (err)
                wiphy_err(wl->wiphy, "%s: ieee80211_register_hw failed, status"
                          "%d\n", __func__, err);

        if (wl->pub->srom_ccode[0] && brcms_set_hint(wl, wl->pub->srom_ccode))
                wiphy_err(wl->wiphy, "%s: regulatory_hint failed, status %d\n",
                          __func__, err);

        n_adapters_found++;
        return wl;

fail:
        brcms_free(wl);
        return NULL;
}



/**
 * determines if a device is a WL device, and if so, attaches it.
 *
 * This function determines if a device pointed to by pdev is a WL device,
 * and if so, performs a brcms_attach() on it.
 *
 * Perimeter lock is initialized in the course of this function.
 */
static int __devinit brcms_bcma_probe(struct bcma_device *pdev)
{
        struct brcms_info *wl;
        struct ieee80211_hw *hw;

        dev_info(&pdev->dev, "mfg %x core %x rev %d class %d irq %d\n",
                 pdev->id.manuf, pdev->id.id, pdev->id.rev, pdev->id.class,
                 pdev->irq);

        if ((pdev->id.manuf != BCMA_MANUF_BCM) ||
            (pdev->id.id != BCMA_CORE_80211))
                return -ENODEV;

        hw = ieee80211_alloc_hw(sizeof(struct brcms_info), &brcms_ops);
        if (!hw) {
                pr_err("%s: ieee80211_alloc_hw failed\n", __func__);
                return -ENOMEM;
        }

        SET_IEEE80211_DEV(hw, &pdev->dev);

        bcma_set_drvdata(pdev, hw);

        memset(hw->priv, 0, sizeof(*wl));

        wl = brcms_attach(pdev);
        if (!wl) {
                pr_err("%s: brcms_attach failed!\n", __func__);
                return -ENODEV;
        }
        return 0;
}

static int brcms_suspend(struct bcma_device *pdev)
{
        struct brcms_info *wl;
        struct ieee80211_hw *hw;

        hw = bcma_get_drvdata(pdev);
        wl = hw->priv;
        if (!wl) {
                pr_err("%s: %s: no driver private struct!\n", KBUILD_MODNAME,
                       __func__);
                return -ENODEV;
        }

        /* only need to flag hw is down for proper resume */
        spin_lock_bh(&wl->lock);
        wl->pub->hw_up = false;
        spin_unlock_bh(&wl->lock);

        pr_debug("brcms_suspend ok\n");

        return 0;
}

static int brcms_resume(struct bcma_device *pdev)
{
        pr_debug("brcms_resume ok\n");
        return 0;
}

static struct bcma_driver brcms_bcma_driver = {
        .name     = KBUILD_MODNAME,
        .probe    = brcms_bcma_probe,
        .suspend  = brcms_suspend,
        .resume   = brcms_resume,
        .remove   = __devexit_p(brcms_remove),
        .id_table = brcms_coreid_table,
};

/**
 * This is the main entry point for the brcmsmac driver.
 *
 * This function is scheduled upon module initialization and
 * does the driver registration, which result in brcms_bcma_probe()
 * call resulting in the driver bringup.
 */
static void brcms_driver_init(struct work_struct *work)
{
        int error;

        error = bcma_driver_register(&brcms_bcma_driver);
        if (error)
                pr_err("%s: register returned %d\n", __func__, error);
}

static DECLARE_WORK(brcms_driver_work, brcms_driver_init);

static int __init brcms_module_init(void)
{
#ifdef DEBUG
        if (msglevel != 0xdeadbeef)
                brcm_msg_level = msglevel;
#endif
        if (!schedule_work(&brcms_driver_work))
                return -EBUSY;

        return 0;
}

/**
 * This function unloads the brcmsmac driver from the system.
 *
 * This function unconditionally unloads the brcmsmac driver module from the
 * system.
 *
 */
static void __exit brcms_module_exit(void)
{
        cancel_work_sync(&brcms_driver_work);
        bcma_driver_unregister(&brcms_bcma_driver);
}

module_init(brcms_module_init);
module_exit(brcms_module_exit);

/*
 * precondition: perimeter lock has been acquired
 */
void brcms_txflowcontrol(struct brcms_info *wl, struct brcms_if *wlif,
                         bool state, int prio)
{
        wiphy_err(wl->wiphy, "Shouldn't be here %s\n", __func__);
}

/*
 * precondition: perimeter lock has been acquired
 */
void brcms_init(struct brcms_info *wl)
{
        BCMMSG(wl->pub->ieee_hw->wiphy, "wl%d\n", wl->pub->unit);
        brcms_reset(wl);
        brcms_c_init(wl->wlc, wl->mute_tx);
}

/*
 * precondition: perimeter lock has been acquired
 */
uint brcms_reset(struct brcms_info *wl)
{
        BCMMSG(wl->pub->ieee_hw->wiphy, "wl%d\n", wl->pub->unit);
        brcms_c_reset(wl->wlc);

        /* dpc will not be rescheduled */
        wl->resched = false;

        return 0;
}

void brcms_fatal_error(struct brcms_info *wl)
{
        wiphy_err(wl->wlc->wiphy, "wl%d: fatal error, reinitializing\n",
                  wl->wlc->pub->unit);
        brcms_reset(wl);
        ieee80211_restart_hw(wl->pub->ieee_hw);
}

/*
 * These are interrupt on/off entry points. Disable interrupts
 * during interrupt state transition.
 */
void brcms_intrson(struct brcms_info *wl)
{
        unsigned long flags;

        spin_lock_irqsave(&wl->isr_lock, flags);
        brcms_c_intrson(wl->wlc);
        spin_unlock_irqrestore(&wl->isr_lock, flags);
}

u32 brcms_intrsoff(struct brcms_info *wl)
{
        unsigned long flags;
        u32 status;

        spin_lock_irqsave(&wl->isr_lock, flags);
        status = brcms_c_intrsoff(wl->wlc);
        spin_unlock_irqrestore(&wl->isr_lock, flags);
        return status;
}

void brcms_intrsrestore(struct brcms_info *wl, u32 macintmask)
{
        unsigned long flags;

        spin_lock_irqsave(&wl->isr_lock, flags);
        brcms_c_intrsrestore(wl->wlc, macintmask);
        spin_unlock_irqrestore(&wl->isr_lock, flags);
}

/*
 * precondition: perimeter lock has been acquired
 */
int brcms_up(struct brcms_info *wl)
{
        int error = 0;

        if (wl->pub->up)
                return 0;

        error = brcms_c_up(wl->wlc);

        return error;
}

/*
 * precondition: perimeter lock has been acquired
 */
void brcms_down(struct brcms_info *wl)
{
        uint callbacks, ret_val = 0;

        /* call common down function */
        ret_val = brcms_c_down(wl->wlc);
        callbacks = atomic_read(&wl->callbacks) - ret_val;

        /* wait for down callbacks to complete */
        spin_unlock_bh(&wl->lock);

        /* For HIGH_only driver, it's important to actually schedule other work,
         * not just spin wait since everything runs at schedule level
         */
        SPINWAIT((atomic_read(&wl->callbacks) > callbacks), 100 * 1000);

        spin_lock_bh(&wl->lock);
}

/*
* precondition: perimeter lock is not acquired
 */
static void _brcms_timer(struct work_struct *work)
{
        struct brcms_timer *t = container_of(work, struct brcms_timer,
                                             dly_wrk.work);

        spin_lock_bh(&t->wl->lock);

        if (t->set) {
                if (t->periodic) {
                        atomic_inc(&t->wl->callbacks);
                        ieee80211_queue_delayed_work(t->wl->pub->ieee_hw,
                                                     &t->dly_wrk,
                                                     msecs_to_jiffies(t->ms));
                } else {
                        t->set = false;
                }

                t->fn(t->arg);
        }

        atomic_dec(&t->wl->callbacks);

        spin_unlock_bh(&t->wl->lock);
}

/*
 * Adds a timer to the list. Caller supplies a timer function.
 * Is called from wlc.
 *
 * precondition: perimeter lock has been acquired
 */
struct brcms_timer *brcms_init_timer(struct brcms_info *wl,
                                     void (*fn) (void *arg),
                                     void *arg, const char *name)
{
        struct brcms_timer *t;

        t = kzalloc(sizeof(struct brcms_timer), GFP_ATOMIC);
        if (!t)
                return NULL;

        INIT_DELAYED_WORK(&t->dly_wrk, _brcms_timer);
        t->wl = wl;
        t->fn = fn;
        t->arg = arg;
        t->next = wl->timers;
        wl->timers = t;

#ifdef DEBUG
        t->name = kmalloc(strlen(name) + 1, GFP_ATOMIC);
        if (t->name)
                strcpy(t->name, name);
#endif

        return t;
}

/*
 * adds only the kernel timer since it's going to be more accurate
 * as well as it's easier to make it periodic
 *
 * precondition: perimeter lock has been acquired
 */
void brcms_add_timer(struct brcms_timer *t, uint ms, int periodic)
{
        struct ieee80211_hw *hw = t->wl->pub->ieee_hw;

#ifdef DEBUG
        if (t->set)
                wiphy_err(hw->wiphy, "%s: Already set. Name: %s, per %d\n",
                          __func__, t->name, periodic);
#endif
        t->ms = ms;
        t->periodic = (bool) periodic;
        t->set = true;

        atomic_inc(&t->wl->callbacks);

        ieee80211_queue_delayed_work(hw, &t->dly_wrk, msecs_to_jiffies(ms));
}

/*
 * return true if timer successfully deleted, false if still pending
 *
 * precondition: perimeter lock has been acquired
 */
bool brcms_del_timer(struct brcms_timer *t)
{
        if (t->set) {
                t->set = false;
                if (!cancel_delayed_work(&t->dly_wrk))
                        return false;

                atomic_dec(&t->wl->callbacks);
        }

        return true;
}

/*
 * precondition: perimeter lock has been acquired
 */
void brcms_free_timer(struct brcms_timer *t)
{
        struct brcms_info *wl = t->wl;
        struct brcms_timer *tmp;

        /* delete the timer in case it is active */
        brcms_del_timer(t);

        if (wl->timers == t) {
                wl->timers = wl->timers->next;
#ifdef DEBUG
                kfree(t->name);
#endif
                kfree(t);
                return;

        }

        tmp = wl->timers;
        while (tmp) {
                if (tmp->next == t) {
                        tmp->next = t->next;
#ifdef DEBUG
                        kfree(t->name);
#endif
                        kfree(t);
                        return;
                }
                tmp = tmp->next;
        }

}

/*
 * precondition: perimeter lock has been acquired
 */
int brcms_ucode_init_buf(struct brcms_info *wl, void **pbuf, u32 idx)
{
        int i, entry;
        const u8 *pdata;
        struct firmware_hdr *hdr;
        for (i = 0; i < wl->fw.fw_cnt; i++) {
                hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data;
                for (entry = 0; entry < wl->fw.hdr_num_entries[i];
                     entry++, hdr++) {
                        u32 len = le32_to_cpu(hdr->len);
                        if (le32_to_cpu(hdr->idx) == idx) {
                                pdata = wl->fw.fw_bin[i]->data +
                                        le32_to_cpu(hdr->offset);
                                *pbuf = kmemdup(pdata, len, GFP_ATOMIC);
                                if (*pbuf == NULL)
                                        goto fail;

                                return 0;
                        }
                }
        }
        wiphy_err(wl->wiphy, "ERROR: ucode buf tag:%d can not be found!\n",
                  idx);
        *pbuf = NULL;
fail:
        return -ENODATA;
}

/*
 * Precondition: Since this function is called in brcms_bcma_probe() context,
 * no locking is required.
 */
int brcms_ucode_init_uint(struct brcms_info *wl, size_t *n_bytes, u32 idx)
{
        int i, entry;
        const u8 *pdata;
        struct firmware_hdr *hdr;
        for (i = 0; i < wl->fw.fw_cnt; i++) {
                hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data;
                for (entry = 0; entry < wl->fw.hdr_num_entries[i];
                     entry++, hdr++) {
                        if (le32_to_cpu(hdr->idx) == idx) {
                                pdata = wl->fw.fw_bin[i]->data +
                                        le32_to_cpu(hdr->offset);
                                if (le32_to_cpu(hdr->len) != 4) {
                                        wiphy_err(wl->wiphy,
                                                  "ERROR: fw hdr len\n");
                                        return -ENOMSG;
                                }
                                *n_bytes = le32_to_cpu(*((__le32 *) pdata));
                                return 0;
                        }
                }
        }
        wiphy_err(wl->wiphy, "ERROR: ucode tag:%d can not be found!\n", idx);
        return -ENOMSG;
}

/*
 * precondition: can both be called locked and unlocked
 */
void brcms_ucode_free_buf(void *p)
{
        kfree(p);
}

/*
 * checks validity of all firmware images loaded from user space
 *
 * Precondition: Since this function is called in brcms_bcma_probe() context,
 * no locking is required.
 */
int brcms_check_firmwares(struct brcms_info *wl)
{
        int i;
        int entry;
        int rc = 0;
        const struct firmware *fw;
        const struct firmware *fw_hdr;
        struct firmware_hdr *ucode_hdr;
        for (i = 0; i < MAX_FW_IMAGES && rc == 0; i++) {
                fw =  wl->fw.fw_bin[i];
                fw_hdr = wl->fw.fw_hdr[i];
                if (fw == NULL && fw_hdr == NULL) {
                        break;
                } else if (fw == NULL || fw_hdr == NULL) {
                        wiphy_err(wl->wiphy, "%s: invalid bin/hdr fw\n",
                                  __func__);
                        rc = -EBADF;
                } else if (fw_hdr->size % sizeof(struct firmware_hdr)) {
                        wiphy_err(wl->wiphy, "%s: non integral fw hdr file "
                                "size %zu/%zu\n", __func__, fw_hdr->size,
                                sizeof(struct firmware_hdr));
                        rc = -EBADF;
                } else if (fw->size < MIN_FW_SIZE || fw->size > MAX_FW_SIZE) {
                        wiphy_err(wl->wiphy, "%s: out of bounds fw file size "
                                  "%zu\n", __func__, fw->size);
                        rc = -EBADF;
                } else {
                        /* check if ucode section overruns firmware image */
                        ucode_hdr = (struct firmware_hdr *)fw_hdr->data;
                        for (entry = 0; entry < wl->fw.hdr_num_entries[i] &&
                             !rc; entry++, ucode_hdr++) {
                                if (le32_to_cpu(ucode_hdr->offset) +
                                    le32_to_cpu(ucode_hdr->len) >
                                    fw->size) {
                                        wiphy_err(wl->wiphy,
                                                  "%s: conflicting bin/hdr\n",
                                                  __func__);
                                        rc = -EBADF;
                                }
                        }
                }
        }
        if (rc == 0 && wl->fw.fw_cnt != i) {
                wiphy_err(wl->wiphy, "%s: invalid fw_cnt=%d\n", __func__,
                        wl->fw.fw_cnt);
                rc = -EBADF;
        }
        return rc;
}

/*
 * precondition: perimeter lock has been acquired
 */
bool brcms_rfkill_set_hw_state(struct brcms_info *wl)
{
        bool blocked = brcms_c_check_radio_disabled(wl->wlc);

        spin_unlock_bh(&wl->lock);
        wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
        if (blocked)
                wiphy_rfkill_start_polling(wl->pub->ieee_hw->wiphy);
        spin_lock_bh(&wl->lock);
        return blocked;
}

/*
 * precondition: perimeter lock has been acquired
 */
void brcms_msleep(struct brcms_info *wl, uint ms)
{
        spin_unlock_bh(&wl->lock);
        msleep(ms);
        spin_lock_bh(&wl->lock);
}