1 /******************************************************************************
3 Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved.
5 This program is free software; you can redistribute it and/or modify it
6 under the terms of version 2 of the GNU General Public License as
7 published by the Free Software Foundation.
9 This program is distributed in the hope that it will be useful, but WITHOUT
10 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 You should have received a copy of the GNU General Public License along with
15 this program; if not, write to the Free Software Foundation, Inc., 59
16 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 The full GNU General Public License is included in this distribution in the
22 Intel Linux Wireless <ilw@linux.intel.com>
23 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 Portions of this file are based on the sample_* files provided by Wireless
26 Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
29 Portions of this file are based on the Host AP project,
30 Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
32 Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
34 Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
35 ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
36 available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
38 ******************************************************************************/
41 Initial driver on which this is based was developed by Janusz Gorycki,
42 Maciej Urbaniak, and Maciej Sosnowski.
44 Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
48 Tx - Commands and Data
50 Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
51 Each TBD contains a pointer to the physical (dma_addr_t) address of data being
52 sent to the firmware as well as the length of the data.
54 The host writes to the TBD queue at the WRITE index. The WRITE index points
55 to the _next_ packet to be written and is advanced when after the TBD has been
58 The firmware pulls from the TBD queue at the READ index. The READ index points
59 to the currently being read entry, and is advanced once the firmware is
62 When data is sent to the firmware, the first TBD is used to indicate to the
63 firmware if a Command or Data is being sent. If it is Command, all of the
64 command information is contained within the physical address referred to by the
65 TBD. If it is Data, the first TBD indicates the type of data packet, number
66 of fragments, etc. The next TBD then refers to the actual packet location.
68 The Tx flow cycle is as follows:
70 1) ipw2100_tx() is called by kernel with SKB to transmit
71 2) Packet is move from the tx_free_list and appended to the transmit pending
73 3) work is scheduled to move pending packets into the shared circular queue.
74 4) when placing packet in the circular queue, the incoming SKB is DMA mapped
75 to a physical address. That address is entered into a TBD. Two TBDs are
76 filled out. The first indicating a data packet, the second referring to the
78 5) the packet is removed from tx_pend_list and placed on the end of the
79 firmware pending list (fw_pend_list)
80 6) firmware is notified that the WRITE index has
81 7) Once the firmware has processed the TBD, INTA is triggered.
82 8) For each Tx interrupt received from the firmware, the READ index is checked
83 to see which TBDs are done being processed.
84 9) For each TBD that has been processed, the ISR pulls the oldest packet
85 from the fw_pend_list.
86 10)The packet structure contained in the fw_pend_list is then used
87 to unmap the DMA address and to free the SKB originally passed to the driver
89 11)The packet structure is placed onto the tx_free_list
91 The above steps are the same for commands, only the msg_free_list/msg_pend_list
92 are used instead of tx_free_list/tx_pend_list
96 Critical Sections / Locking :
98 There are two locks utilized. The first is the low level lock (priv->low_lock)
99 that protects the following:
101 - Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
103 tx_free_list : Holds pre-allocated Tx buffers.
104 TAIL modified in __ipw2100_tx_process()
105 HEAD modified in ipw2100_tx()
107 tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
108 TAIL modified ipw2100_tx()
109 HEAD modified by ipw2100_tx_send_data()
111 msg_free_list : Holds pre-allocated Msg (Command) buffers
112 TAIL modified in __ipw2100_tx_process()
113 HEAD modified in ipw2100_hw_send_command()
115 msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
116 TAIL modified in ipw2100_hw_send_command()
117 HEAD modified in ipw2100_tx_send_commands()
119 The flow of data on the TX side is as follows:
121 MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
122 TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
124 The methods that work on the TBD ring are protected via priv->low_lock.
126 - The internal data state of the device itself
127 - Access to the firmware read/write indexes for the BD queues
130 All external entry functions are locked with the priv->action_lock to ensure
131 that only one external action is invoked at a time.
136 #include <linux/compiler.h>
137 #include <linux/errno.h>
138 #include <linux/if_arp.h>
139 #include <linux/in6.h>
140 #include <linux/in.h>
141 #include <linux/ip.h>
142 #include <linux/kernel.h>
143 #include <linux/kmod.h>
144 #include <linux/module.h>
145 #include <linux/netdevice.h>
146 #include <linux/ethtool.h>
147 #include <linux/pci.h>
148 #include <linux/dma-mapping.h>
149 #include <linux/proc_fs.h>
150 #include <linux/skbuff.h>
151 #include <linux/uaccess.h>
153 #include <linux/fs.h>
154 #include <linux/mm.h>
155 #include <linux/slab.h>
156 #include <linux/unistd.h>
157 #include <linux/stringify.h>
158 #include <linux/tcp.h>
159 #include <linux/types.h>
160 #include <linux/time.h>
161 #include <linux/firmware.h>
162 #include <linux/acpi.h>
163 #include <linux/ctype.h>
164 #include <linux/pm_qos.h>
166 #include <net/lib80211.h>
171 #define IPW2100_VERSION "git-1.2.2"
173 #define DRV_NAME "ipw2100"
174 #define DRV_VERSION IPW2100_VERSION
175 #define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver"
176 #define DRV_COPYRIGHT "Copyright(c) 2003-2006 Intel Corporation"
178 static struct pm_qos_request ipw2100_pm_qos_req
;
180 /* Debugging stuff */
181 #ifdef CONFIG_IPW2100_DEBUG
182 #define IPW2100_RX_DEBUG /* Reception debugging */
185 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
186 MODULE_VERSION(DRV_VERSION
);
187 MODULE_AUTHOR(DRV_COPYRIGHT
);
188 MODULE_LICENSE("GPL");
190 static int debug
= 0;
191 static int network_mode
= 0;
192 static int channel
= 0;
193 static int associate
= 0;
194 static int disable
= 0;
196 static struct ipw2100_fw ipw2100_firmware
;
199 #include <linux/moduleparam.h>
200 module_param(debug
, int, 0444);
201 module_param_named(mode
, network_mode
, int, 0444);
202 module_param(channel
, int, 0444);
203 module_param(associate
, int, 0444);
204 module_param(disable
, int, 0444);
206 MODULE_PARM_DESC(debug
, "debug level");
207 MODULE_PARM_DESC(mode
, "network mode (0=BSS,1=IBSS,2=Monitor)");
208 MODULE_PARM_DESC(channel
, "channel");
209 MODULE_PARM_DESC(associate
, "auto associate when scanning (default off)");
210 MODULE_PARM_DESC(disable
, "manually disable the radio (default 0 [radio on])");
212 static u32 ipw2100_debug_level
= IPW_DL_NONE
;
214 #ifdef CONFIG_IPW2100_DEBUG
215 #define IPW_DEBUG(level, message...) \
217 if (ipw2100_debug_level & (level)) { \
218 printk(KERN_DEBUG "ipw2100: %c %s ", \
219 in_interrupt() ? 'I' : 'U', __func__); \
224 #define IPW_DEBUG(level, message...) do {} while (0)
225 #endif /* CONFIG_IPW2100_DEBUG */
227 #ifdef CONFIG_IPW2100_DEBUG
228 static const char *command_types
[] = {
230 "unused", /* HOST_ATTENTION */
232 "unused", /* SLEEP */
233 "unused", /* HOST_POWER_DOWN */
236 "unused", /* SET_IMR */
239 "AUTHENTICATION_TYPE",
242 "INTERNATIONAL_MODE",
257 "CLEAR_ALL_MULTICAST",
278 "AP_OR_STATION_TABLE",
282 "unused", /* SAVE_CALIBRATION */
283 "unused", /* RESTORE_CALIBRATION */
287 "HOST_PRE_POWER_DOWN",
288 "unused", /* HOST_INTERRUPT_COALESCING */
290 "CARD_DISABLE_PHY_OFF",
293 "SET_STATION_STAT_BITS",
294 "CLEAR_STATIONS_STAT_BITS",
296 "SET_SECURITY_INFORMATION",
297 "DISASSOCIATION_BSSID",
302 static const long ipw2100_frequencies
[] = {
303 2412, 2417, 2422, 2427,
304 2432, 2437, 2442, 2447,
305 2452, 2457, 2462, 2467,
309 #define FREQ_COUNT ARRAY_SIZE(ipw2100_frequencies)
311 static struct ieee80211_rate ipw2100_bg_rates
[] = {
313 { .bitrate
= 20, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
314 { .bitrate
= 55, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
315 { .bitrate
= 110, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
318 #define RATE_COUNT ARRAY_SIZE(ipw2100_bg_rates)
320 /* Pre-decl until we get the code solid and then we can clean it up */
321 static void ipw2100_tx_send_commands(struct ipw2100_priv
*priv
);
322 static void ipw2100_tx_send_data(struct ipw2100_priv
*priv
);
323 static int ipw2100_adapter_setup(struct ipw2100_priv
*priv
);
325 static void ipw2100_queues_initialize(struct ipw2100_priv
*priv
);
326 static void ipw2100_queues_free(struct ipw2100_priv
*priv
);
327 static int ipw2100_queues_allocate(struct ipw2100_priv
*priv
);
329 static int ipw2100_fw_download(struct ipw2100_priv
*priv
,
330 struct ipw2100_fw
*fw
);
331 static int ipw2100_get_firmware(struct ipw2100_priv
*priv
,
332 struct ipw2100_fw
*fw
);
333 static int ipw2100_get_fwversion(struct ipw2100_priv
*priv
, char *buf
,
335 static int ipw2100_get_ucodeversion(struct ipw2100_priv
*priv
, char *buf
,
337 static void ipw2100_release_firmware(struct ipw2100_priv
*priv
,
338 struct ipw2100_fw
*fw
);
339 static int ipw2100_ucode_download(struct ipw2100_priv
*priv
,
340 struct ipw2100_fw
*fw
);
341 static void ipw2100_wx_event_work(struct work_struct
*work
);
342 static struct iw_statistics
*ipw2100_wx_wireless_stats(struct net_device
*dev
);
343 static const struct iw_handler_def ipw2100_wx_handler_def
;
345 static inline void read_register(struct net_device
*dev
, u32 reg
, u32
* val
)
347 struct ipw2100_priv
*priv
= libipw_priv(dev
);
349 *val
= ioread32(priv
->ioaddr
+ reg
);
350 IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg
, *val
);
353 static inline void write_register(struct net_device
*dev
, u32 reg
, u32 val
)
355 struct ipw2100_priv
*priv
= libipw_priv(dev
);
357 iowrite32(val
, priv
->ioaddr
+ reg
);
358 IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg
, val
);
361 static inline void read_register_word(struct net_device
*dev
, u32 reg
,
364 struct ipw2100_priv
*priv
= libipw_priv(dev
);
366 *val
= ioread16(priv
->ioaddr
+ reg
);
367 IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg
, *val
);
370 static inline void read_register_byte(struct net_device
*dev
, u32 reg
, u8
* val
)
372 struct ipw2100_priv
*priv
= libipw_priv(dev
);
374 *val
= ioread8(priv
->ioaddr
+ reg
);
375 IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg
, *val
);
378 static inline void write_register_word(struct net_device
*dev
, u32 reg
, u16 val
)
380 struct ipw2100_priv
*priv
= libipw_priv(dev
);
382 iowrite16(val
, priv
->ioaddr
+ reg
);
383 IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg
, val
);
386 static inline void write_register_byte(struct net_device
*dev
, u32 reg
, u8 val
)
388 struct ipw2100_priv
*priv
= libipw_priv(dev
);
390 iowrite8(val
, priv
->ioaddr
+ reg
);
391 IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg
, val
);
394 static inline void read_nic_dword(struct net_device
*dev
, u32 addr
, u32
* val
)
396 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
397 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
398 read_register(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
401 static inline void write_nic_dword(struct net_device
*dev
, u32 addr
, u32 val
)
403 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
404 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
405 write_register(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
408 static inline void read_nic_word(struct net_device
*dev
, u32 addr
, u16
* val
)
410 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
411 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
412 read_register_word(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
415 static inline void write_nic_word(struct net_device
*dev
, u32 addr
, u16 val
)
417 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
418 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
419 write_register_word(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
422 static inline void read_nic_byte(struct net_device
*dev
, u32 addr
, u8
* val
)
424 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
425 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
426 read_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
429 static inline void write_nic_byte(struct net_device
*dev
, u32 addr
, u8 val
)
431 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
432 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
433 write_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
436 static inline void write_nic_auto_inc_address(struct net_device
*dev
, u32 addr
)
438 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
,
439 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
442 static inline void write_nic_dword_auto_inc(struct net_device
*dev
, u32 val
)
444 write_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, val
);
447 static void write_nic_memory(struct net_device
*dev
, u32 addr
, u32 len
,
455 /* read first nibble byte by byte */
456 aligned_addr
= addr
& (~0x3);
457 dif_len
= addr
- aligned_addr
;
459 /* Start reading at aligned_addr + dif_len */
460 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
462 for (i
= dif_len
; i
< 4; i
++, buf
++)
463 write_register_byte(dev
,
464 IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
471 /* read DWs through autoincrement registers */
472 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
, aligned_addr
);
473 aligned_len
= len
& (~0x3);
474 for (i
= 0; i
< aligned_len
; i
+= 4, buf
+= 4, aligned_addr
+= 4)
475 write_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, *(u32
*) buf
);
477 /* copy the last nibble */
478 dif_len
= len
- aligned_len
;
479 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
, aligned_addr
);
480 for (i
= 0; i
< dif_len
; i
++, buf
++)
481 write_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
485 static void read_nic_memory(struct net_device
*dev
, u32 addr
, u32 len
,
493 /* read first nibble byte by byte */
494 aligned_addr
= addr
& (~0x3);
495 dif_len
= addr
- aligned_addr
;
497 /* Start reading at aligned_addr + dif_len */
498 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
500 for (i
= dif_len
; i
< 4; i
++, buf
++)
501 read_register_byte(dev
,
502 IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
509 /* read DWs through autoincrement registers */
510 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
, aligned_addr
);
511 aligned_len
= len
& (~0x3);
512 for (i
= 0; i
< aligned_len
; i
+= 4, buf
+= 4, aligned_addr
+= 4)
513 read_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, (u32
*) buf
);
515 /* copy the last nibble */
516 dif_len
= len
- aligned_len
;
517 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
, aligned_addr
);
518 for (i
= 0; i
< dif_len
; i
++, buf
++)
519 read_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
+ i
, buf
);
522 static bool ipw2100_hw_is_adapter_in_system(struct net_device
*dev
)
526 read_register(dev
, IPW_REG_DOA_DEBUG_AREA_START
, &dbg
);
528 return dbg
== IPW_DATA_DOA_DEBUG_VALUE
;
531 static int ipw2100_get_ordinal(struct ipw2100_priv
*priv
, u32 ord
,
532 void *val
, u32
* len
)
534 struct ipw2100_ordinals
*ordinals
= &priv
->ordinals
;
541 if (ordinals
->table1_addr
== 0) {
542 printk(KERN_WARNING DRV_NAME
": attempt to use fw ordinals "
543 "before they have been loaded.\n");
547 if (IS_ORDINAL_TABLE_ONE(ordinals
, ord
)) {
548 if (*len
< IPW_ORD_TAB_1_ENTRY_SIZE
) {
549 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
551 printk(KERN_WARNING DRV_NAME
552 ": ordinal buffer length too small, need %zd\n",
553 IPW_ORD_TAB_1_ENTRY_SIZE
);
558 read_nic_dword(priv
->net_dev
,
559 ordinals
->table1_addr
+ (ord
<< 2), &addr
);
560 read_nic_dword(priv
->net_dev
, addr
, val
);
562 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
567 if (IS_ORDINAL_TABLE_TWO(ordinals
, ord
)) {
569 ord
-= IPW_START_ORD_TAB_2
;
571 /* get the address of statistic */
572 read_nic_dword(priv
->net_dev
,
573 ordinals
->table2_addr
+ (ord
<< 3), &addr
);
575 /* get the second DW of statistics ;
576 * two 16-bit words - first is length, second is count */
577 read_nic_dword(priv
->net_dev
,
578 ordinals
->table2_addr
+ (ord
<< 3) + sizeof(u32
),
581 /* get each entry length */
582 field_len
= *((u16
*) & field_info
);
584 /* get number of entries */
585 field_count
= *(((u16
*) & field_info
) + 1);
587 /* abort if no enough memory */
588 total_length
= field_len
* field_count
;
589 if (total_length
> *len
) {
598 /* read the ordinal data from the SRAM */
599 read_nic_memory(priv
->net_dev
, addr
, total_length
, val
);
604 printk(KERN_WARNING DRV_NAME
": ordinal %d neither in table 1 nor "
605 "in table 2\n", ord
);
610 static int ipw2100_set_ordinal(struct ipw2100_priv
*priv
, u32 ord
, u32
* val
,
613 struct ipw2100_ordinals
*ordinals
= &priv
->ordinals
;
616 if (IS_ORDINAL_TABLE_ONE(ordinals
, ord
)) {
617 if (*len
!= IPW_ORD_TAB_1_ENTRY_SIZE
) {
618 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
619 IPW_DEBUG_INFO("wrong size\n");
623 read_nic_dword(priv
->net_dev
,
624 ordinals
->table1_addr
+ (ord
<< 2), &addr
);
626 write_nic_dword(priv
->net_dev
, addr
, *val
);
628 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
633 IPW_DEBUG_INFO("wrong table\n");
634 if (IS_ORDINAL_TABLE_TWO(ordinals
, ord
))
640 static char *snprint_line(char *buf
, size_t count
,
641 const u8
* data
, u32 len
, u32 ofs
)
646 out
= snprintf(buf
, count
, "%08X", ofs
);
648 for (l
= 0, i
= 0; i
< 2; i
++) {
649 out
+= snprintf(buf
+ out
, count
- out
, " ");
650 for (j
= 0; j
< 8 && l
< len
; j
++, l
++)
651 out
+= snprintf(buf
+ out
, count
- out
, "%02X ",
654 out
+= snprintf(buf
+ out
, count
- out
, " ");
657 out
+= snprintf(buf
+ out
, count
- out
, " ");
658 for (l
= 0, i
= 0; i
< 2; i
++) {
659 out
+= snprintf(buf
+ out
, count
- out
, " ");
660 for (j
= 0; j
< 8 && l
< len
; j
++, l
++) {
661 c
= data
[(i
* 8 + j
)];
662 if (!isascii(c
) || !isprint(c
))
665 out
+= snprintf(buf
+ out
, count
- out
, "%c", c
);
669 out
+= snprintf(buf
+ out
, count
- out
, " ");
675 static void printk_buf(int level
, const u8
* data
, u32 len
)
679 if (!(ipw2100_debug_level
& level
))
683 printk(KERN_DEBUG
"%s\n",
684 snprint_line(line
, sizeof(line
), &data
[ofs
],
685 min(len
, 16U), ofs
));
687 len
-= min(len
, 16U);
691 #define MAX_RESET_BACKOFF 10
693 static void schedule_reset(struct ipw2100_priv
*priv
)
695 unsigned long now
= get_seconds();
697 /* If we haven't received a reset request within the backoff period,
698 * then we can reset the backoff interval so this reset occurs
700 if (priv
->reset_backoff
&&
701 (now
- priv
->last_reset
> priv
->reset_backoff
))
702 priv
->reset_backoff
= 0;
704 priv
->last_reset
= get_seconds();
706 if (!(priv
->status
& STATUS_RESET_PENDING
)) {
707 IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
708 priv
->net_dev
->name
, priv
->reset_backoff
);
709 netif_carrier_off(priv
->net_dev
);
710 netif_stop_queue(priv
->net_dev
);
711 priv
->status
|= STATUS_RESET_PENDING
;
712 if (priv
->reset_backoff
)
713 schedule_delayed_work(&priv
->reset_work
,
714 priv
->reset_backoff
* HZ
);
716 schedule_delayed_work(&priv
->reset_work
, 0);
718 if (priv
->reset_backoff
< MAX_RESET_BACKOFF
)
719 priv
->reset_backoff
++;
721 wake_up_interruptible(&priv
->wait_command_queue
);
723 IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
724 priv
->net_dev
->name
);
728 #define HOST_COMPLETE_TIMEOUT (2 * HZ)
729 static int ipw2100_hw_send_command(struct ipw2100_priv
*priv
,
730 struct host_command
*cmd
)
732 struct list_head
*element
;
733 struct ipw2100_tx_packet
*packet
;
737 IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
738 command_types
[cmd
->host_command
], cmd
->host_command
,
739 cmd
->host_command_length
);
740 printk_buf(IPW_DL_HC
, (u8
*) cmd
->host_command_parameters
,
741 cmd
->host_command_length
);
743 spin_lock_irqsave(&priv
->low_lock
, flags
);
745 if (priv
->fatal_error
) {
747 ("Attempt to send command while hardware in fatal error condition.\n");
752 if (!(priv
->status
& STATUS_RUNNING
)) {
754 ("Attempt to send command while hardware is not running.\n");
759 if (priv
->status
& STATUS_CMD_ACTIVE
) {
761 ("Attempt to send command while another command is pending.\n");
766 if (list_empty(&priv
->msg_free_list
)) {
767 IPW_DEBUG_INFO("no available msg buffers\n");
771 priv
->status
|= STATUS_CMD_ACTIVE
;
772 priv
->messages_sent
++;
774 element
= priv
->msg_free_list
.next
;
776 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
777 packet
->jiffy_start
= jiffies
;
779 /* initialize the firmware command packet */
780 packet
->info
.c_struct
.cmd
->host_command_reg
= cmd
->host_command
;
781 packet
->info
.c_struct
.cmd
->host_command_reg1
= cmd
->host_command1
;
782 packet
->info
.c_struct
.cmd
->host_command_len_reg
=
783 cmd
->host_command_length
;
784 packet
->info
.c_struct
.cmd
->sequence
= cmd
->host_command_sequence
;
786 memcpy(packet
->info
.c_struct
.cmd
->host_command_params_reg
,
787 cmd
->host_command_parameters
,
788 sizeof(packet
->info
.c_struct
.cmd
->host_command_params_reg
));
791 DEC_STAT(&priv
->msg_free_stat
);
793 list_add_tail(element
, &priv
->msg_pend_list
);
794 INC_STAT(&priv
->msg_pend_stat
);
796 ipw2100_tx_send_commands(priv
);
797 ipw2100_tx_send_data(priv
);
799 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
802 * We must wait for this command to complete before another
803 * command can be sent... but if we wait more than 3 seconds
804 * then there is a problem.
808 wait_event_interruptible_timeout(priv
->wait_command_queue
,
810 status
& STATUS_CMD_ACTIVE
),
811 HOST_COMPLETE_TIMEOUT
);
814 IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
815 1000 * (HOST_COMPLETE_TIMEOUT
/ HZ
));
816 priv
->fatal_error
= IPW2100_ERR_MSG_TIMEOUT
;
817 priv
->status
&= ~STATUS_CMD_ACTIVE
;
818 schedule_reset(priv
);
822 if (priv
->fatal_error
) {
823 printk(KERN_WARNING DRV_NAME
": %s: firmware fatal error\n",
824 priv
->net_dev
->name
);
828 /* !!!!! HACK TEST !!!!!
829 * When lots of debug trace statements are enabled, the driver
830 * doesn't seem to have as many firmware restart cycles...
832 * As a test, we're sticking in a 1/100s delay here */
833 schedule_timeout_uninterruptible(msecs_to_jiffies(10));
838 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
844 * Verify the values and data access of the hardware
845 * No locks needed or used. No functions called.
847 static int ipw2100_verify(struct ipw2100_priv
*priv
)
852 u32 val1
= 0x76543210;
853 u32 val2
= 0xFEDCBA98;
855 /* Domain 0 check - all values should be DOA_DEBUG */
856 for (address
= IPW_REG_DOA_DEBUG_AREA_START
;
857 address
< IPW_REG_DOA_DEBUG_AREA_END
; address
+= sizeof(u32
)) {
858 read_register(priv
->net_dev
, address
, &data1
);
859 if (data1
!= IPW_DATA_DOA_DEBUG_VALUE
)
863 /* Domain 1 check - use arbitrary read/write compare */
864 for (address
= 0; address
< 5; address
++) {
865 /* The memory area is not used now */
866 write_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x32,
868 write_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x36,
870 read_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x32,
872 read_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x36,
874 if (val1
== data1
&& val2
== data2
)
883 * Loop until the CARD_DISABLED bit is the same value as the
886 * TODO: See if it would be more efficient to do a wait/wake
887 * cycle and have the completion event trigger the wakeup
890 #define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli
891 static int ipw2100_wait_for_card_state(struct ipw2100_priv
*priv
, int state
)
895 u32 len
= sizeof(card_state
);
898 for (i
= 0; i
<= IPW_CARD_DISABLE_COMPLETE_WAIT
* 1000; i
+= 50) {
899 err
= ipw2100_get_ordinal(priv
, IPW_ORD_CARD_DISABLED
,
902 IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
907 /* We'll break out if either the HW state says it is
908 * in the state we want, or if HOST_COMPLETE command
910 if ((card_state
== state
) ||
911 ((priv
->status
& STATUS_ENABLED
) ?
912 IPW_HW_STATE_ENABLED
: IPW_HW_STATE_DISABLED
) == state
) {
913 if (state
== IPW_HW_STATE_ENABLED
)
914 priv
->status
|= STATUS_ENABLED
;
916 priv
->status
&= ~STATUS_ENABLED
;
924 IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
925 state
? "DISABLED" : "ENABLED");
929 /*********************************************************************
930 Procedure : sw_reset_and_clock
931 Purpose : Asserts s/w reset, asserts clock initialization
932 and waits for clock stabilization
933 ********************************************************************/
934 static int sw_reset_and_clock(struct ipw2100_priv
*priv
)
940 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
941 IPW_AUX_HOST_RESET_REG_SW_RESET
);
943 // wait for clock stabilization
944 for (i
= 0; i
< 1000; i
++) {
945 udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY
);
947 // check clock ready bit
948 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, &r
);
949 if (r
& IPW_AUX_HOST_RESET_REG_PRINCETON_RESET
)
954 return -EIO
; // TODO: better error value
956 /* set "initialization complete" bit to move adapter to
958 write_register(priv
->net_dev
, IPW_REG_GP_CNTRL
,
959 IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE
);
961 /* wait for clock stabilization */
962 for (i
= 0; i
< 10000; i
++) {
963 udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY
* 4);
965 /* check clock ready bit */
966 read_register(priv
->net_dev
, IPW_REG_GP_CNTRL
, &r
);
967 if (r
& IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY
)
972 return -EIO
; /* TODO: better error value */
974 /* set D0 standby bit */
975 read_register(priv
->net_dev
, IPW_REG_GP_CNTRL
, &r
);
976 write_register(priv
->net_dev
, IPW_REG_GP_CNTRL
,
977 r
| IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY
);
982 /*********************************************************************
983 Procedure : ipw2100_download_firmware
984 Purpose : Initiaze adapter after power on.
986 1. assert s/w reset first!
987 2. awake clocks & wait for clock stabilization
988 3. hold ARC (don't ask me why...)
989 4. load Dino ucode and reset/clock init again
990 5. zero-out shared mem
992 *******************************************************************/
993 static int ipw2100_download_firmware(struct ipw2100_priv
*priv
)
999 /* Fetch the firmware and microcode */
1000 struct ipw2100_fw ipw2100_firmware
;
1003 if (priv
->fatal_error
) {
1004 IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
1005 "fatal error %d. Interface must be brought down.\n",
1006 priv
->net_dev
->name
, priv
->fatal_error
);
1010 if (!ipw2100_firmware
.version
) {
1011 err
= ipw2100_get_firmware(priv
, &ipw2100_firmware
);
1013 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1014 priv
->net_dev
->name
, err
);
1015 priv
->fatal_error
= IPW2100_ERR_FW_LOAD
;
1020 err
= ipw2100_get_firmware(priv
, &ipw2100_firmware
);
1022 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1023 priv
->net_dev
->name
, err
);
1024 priv
->fatal_error
= IPW2100_ERR_FW_LOAD
;
1028 priv
->firmware_version
= ipw2100_firmware
.version
;
1030 /* s/w reset and clock stabilization */
1031 err
= sw_reset_and_clock(priv
);
1033 IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
1034 priv
->net_dev
->name
, err
);
1038 err
= ipw2100_verify(priv
);
1040 IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
1041 priv
->net_dev
->name
, err
);
1046 write_nic_dword(priv
->net_dev
,
1047 IPW_INTERNAL_REGISTER_HALT_AND_RESET
, 0x80000000);
1049 /* allow ARC to run */
1050 write_register(priv
->net_dev
, IPW_REG_RESET_REG
, 0);
1052 /* load microcode */
1053 err
= ipw2100_ucode_download(priv
, &ipw2100_firmware
);
1055 printk(KERN_ERR DRV_NAME
": %s: Error loading microcode: %d\n",
1056 priv
->net_dev
->name
, err
);
1061 write_nic_dword(priv
->net_dev
,
1062 IPW_INTERNAL_REGISTER_HALT_AND_RESET
, 0x00000000);
1064 /* s/w reset and clock stabilization (again!!!) */
1065 err
= sw_reset_and_clock(priv
);
1067 printk(KERN_ERR DRV_NAME
1068 ": %s: sw_reset_and_clock failed: %d\n",
1069 priv
->net_dev
->name
, err
);
1074 err
= ipw2100_fw_download(priv
, &ipw2100_firmware
);
1076 IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
1077 priv
->net_dev
->name
, err
);
1082 * When the .resume method of the driver is called, the other
1083 * part of the system, i.e. the ide driver could still stay in
1084 * the suspend stage. This prevents us from loading the firmware
1085 * from the disk. --YZ
1088 /* free any storage allocated for firmware image */
1089 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
1092 /* zero out Domain 1 area indirectly (Si requirement) */
1093 for (address
= IPW_HOST_FW_SHARED_AREA0
;
1094 address
< IPW_HOST_FW_SHARED_AREA0_END
; address
+= 4)
1095 write_nic_dword(priv
->net_dev
, address
, 0);
1096 for (address
= IPW_HOST_FW_SHARED_AREA1
;
1097 address
< IPW_HOST_FW_SHARED_AREA1_END
; address
+= 4)
1098 write_nic_dword(priv
->net_dev
, address
, 0);
1099 for (address
= IPW_HOST_FW_SHARED_AREA2
;
1100 address
< IPW_HOST_FW_SHARED_AREA2_END
; address
+= 4)
1101 write_nic_dword(priv
->net_dev
, address
, 0);
1102 for (address
= IPW_HOST_FW_SHARED_AREA3
;
1103 address
< IPW_HOST_FW_SHARED_AREA3_END
; address
+= 4)
1104 write_nic_dword(priv
->net_dev
, address
, 0);
1105 for (address
= IPW_HOST_FW_INTERRUPT_AREA
;
1106 address
< IPW_HOST_FW_INTERRUPT_AREA_END
; address
+= 4)
1107 write_nic_dword(priv
->net_dev
, address
, 0);
1112 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
1116 static inline void ipw2100_enable_interrupts(struct ipw2100_priv
*priv
)
1118 if (priv
->status
& STATUS_INT_ENABLED
)
1120 priv
->status
|= STATUS_INT_ENABLED
;
1121 write_register(priv
->net_dev
, IPW_REG_INTA_MASK
, IPW_INTERRUPT_MASK
);
1124 static inline void ipw2100_disable_interrupts(struct ipw2100_priv
*priv
)
1126 if (!(priv
->status
& STATUS_INT_ENABLED
))
1128 priv
->status
&= ~STATUS_INT_ENABLED
;
1129 write_register(priv
->net_dev
, IPW_REG_INTA_MASK
, 0x0);
1132 static void ipw2100_initialize_ordinals(struct ipw2100_priv
*priv
)
1134 struct ipw2100_ordinals
*ord
= &priv
->ordinals
;
1136 IPW_DEBUG_INFO("enter\n");
1138 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1
,
1141 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2
,
1144 read_nic_dword(priv
->net_dev
, ord
->table1_addr
, &ord
->table1_size
);
1145 read_nic_dword(priv
->net_dev
, ord
->table2_addr
, &ord
->table2_size
);
1147 ord
->table2_size
&= 0x0000FFFF;
1149 IPW_DEBUG_INFO("table 1 size: %d\n", ord
->table1_size
);
1150 IPW_DEBUG_INFO("table 2 size: %d\n", ord
->table2_size
);
1151 IPW_DEBUG_INFO("exit\n");
1154 static inline void ipw2100_hw_set_gpio(struct ipw2100_priv
*priv
)
1158 * Set GPIO 3 writable by FW; GPIO 1 writable
1159 * by driver and enable clock
1161 reg
= (IPW_BIT_GPIO_GPIO3_MASK
| IPW_BIT_GPIO_GPIO1_ENABLE
|
1162 IPW_BIT_GPIO_LED_OFF
);
1163 write_register(priv
->net_dev
, IPW_REG_GPIO
, reg
);
1166 static int rf_kill_active(struct ipw2100_priv
*priv
)
1168 #define MAX_RF_KILL_CHECKS 5
1169 #define RF_KILL_CHECK_DELAY 40
1171 unsigned short value
= 0;
1175 if (!(priv
->hw_features
& HW_FEATURE_RFKILL
)) {
1176 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, false);
1177 priv
->status
&= ~STATUS_RF_KILL_HW
;
1181 for (i
= 0; i
< MAX_RF_KILL_CHECKS
; i
++) {
1182 udelay(RF_KILL_CHECK_DELAY
);
1183 read_register(priv
->net_dev
, IPW_REG_GPIO
, ®
);
1184 value
= (value
<< 1) | ((reg
& IPW_BIT_GPIO_RF_KILL
) ? 0 : 1);
1188 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, true);
1189 priv
->status
|= STATUS_RF_KILL_HW
;
1191 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, false);
1192 priv
->status
&= ~STATUS_RF_KILL_HW
;
1195 return (value
== 0);
1198 static int ipw2100_get_hw_features(struct ipw2100_priv
*priv
)
1204 * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
1207 if (ipw2100_get_ordinal
1208 (priv
, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS
, &addr
, &len
)) {
1209 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1214 IPW_DEBUG_INFO("EEPROM address: %08X\n", addr
);
1217 * EEPROM version is the byte at offset 0xfd in firmware
1218 * We read 4 bytes, then shift out the byte we actually want */
1219 read_nic_dword(priv
->net_dev
, addr
+ 0xFC, &val
);
1220 priv
->eeprom_version
= (val
>> 24) & 0xFF;
1221 IPW_DEBUG_INFO("EEPROM version: %d\n", priv
->eeprom_version
);
1224 * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
1226 * notice that the EEPROM bit is reverse polarity, i.e.
1227 * bit = 0 signifies HW RF kill switch is supported
1228 * bit = 1 signifies HW RF kill switch is NOT supported
1230 read_nic_dword(priv
->net_dev
, addr
+ 0x20, &val
);
1231 if (!((val
>> 24) & 0x01))
1232 priv
->hw_features
|= HW_FEATURE_RFKILL
;
1234 IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
1235 (priv
->hw_features
& HW_FEATURE_RFKILL
) ? "" : "not ");
1241 * Start firmware execution after power on and initialization
1244 * 2. Wait for f/w initialization completes;
1246 static int ipw2100_start_adapter(struct ipw2100_priv
*priv
)
1249 u32 inta
, inta_mask
, gpio
;
1251 IPW_DEBUG_INFO("enter\n");
1253 if (priv
->status
& STATUS_RUNNING
)
1257 * Initialize the hw - drive adapter to DO state by setting
1258 * init_done bit. Wait for clk_ready bit and Download
1261 if (ipw2100_download_firmware(priv
)) {
1262 printk(KERN_ERR DRV_NAME
1263 ": %s: Failed to power on the adapter.\n",
1264 priv
->net_dev
->name
);
1268 /* Clear the Tx, Rx and Msg queues and the r/w indexes
1269 * in the firmware RBD and TBD ring queue */
1270 ipw2100_queues_initialize(priv
);
1272 ipw2100_hw_set_gpio(priv
);
1274 /* TODO -- Look at disabling interrupts here to make sure none
1275 * get fired during FW initialization */
1277 /* Release ARC - clear reset bit */
1278 write_register(priv
->net_dev
, IPW_REG_RESET_REG
, 0);
1280 /* wait for f/w initialization complete */
1281 IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
1284 schedule_timeout_uninterruptible(msecs_to_jiffies(40));
1285 /* Todo... wait for sync command ... */
1287 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
1289 /* check "init done" bit */
1290 if (inta
& IPW2100_INTA_FW_INIT_DONE
) {
1291 /* reset "init done" bit */
1292 write_register(priv
->net_dev
, IPW_REG_INTA
,
1293 IPW2100_INTA_FW_INIT_DONE
);
1297 /* check error conditions : we check these after the firmware
1298 * check so that if there is an error, the interrupt handler
1299 * will see it and the adapter will be reset */
1301 (IPW2100_INTA_FATAL_ERROR
| IPW2100_INTA_PARITY_ERROR
)) {
1302 /* clear error conditions */
1303 write_register(priv
->net_dev
, IPW_REG_INTA
,
1304 IPW2100_INTA_FATAL_ERROR
|
1305 IPW2100_INTA_PARITY_ERROR
);
1309 /* Clear out any pending INTAs since we aren't supposed to have
1310 * interrupts enabled at this point... */
1311 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
1312 read_register(priv
->net_dev
, IPW_REG_INTA_MASK
, &inta_mask
);
1313 inta
&= IPW_INTERRUPT_MASK
;
1314 /* Clear out any pending interrupts */
1315 if (inta
& inta_mask
)
1316 write_register(priv
->net_dev
, IPW_REG_INTA
, inta
);
1318 IPW_DEBUG_FW("f/w initialization complete: %s\n",
1319 i
? "SUCCESS" : "FAILED");
1322 printk(KERN_WARNING DRV_NAME
1323 ": %s: Firmware did not initialize.\n",
1324 priv
->net_dev
->name
);
1328 /* allow firmware to write to GPIO1 & GPIO3 */
1329 read_register(priv
->net_dev
, IPW_REG_GPIO
, &gpio
);
1331 gpio
|= (IPW_BIT_GPIO_GPIO1_MASK
| IPW_BIT_GPIO_GPIO3_MASK
);
1333 write_register(priv
->net_dev
, IPW_REG_GPIO
, gpio
);
1335 /* Ready to receive commands */
1336 priv
->status
|= STATUS_RUNNING
;
1338 /* The adapter has been reset; we are not associated */
1339 priv
->status
&= ~(STATUS_ASSOCIATING
| STATUS_ASSOCIATED
);
1341 IPW_DEBUG_INFO("exit\n");
1346 static inline void ipw2100_reset_fatalerror(struct ipw2100_priv
*priv
)
1348 if (!priv
->fatal_error
)
1351 priv
->fatal_errors
[priv
->fatal_index
++] = priv
->fatal_error
;
1352 priv
->fatal_index
%= IPW2100_ERROR_QUEUE
;
1353 priv
->fatal_error
= 0;
1356 /* NOTE: Our interrupt is disabled when this method is called */
1357 static int ipw2100_power_cycle_adapter(struct ipw2100_priv
*priv
)
1362 IPW_DEBUG_INFO("Power cycling the hardware.\n");
1364 ipw2100_hw_set_gpio(priv
);
1366 /* Step 1. Stop Master Assert */
1367 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1368 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
1370 /* Step 2. Wait for stop Master Assert
1371 * (not more than 50us, otherwise ret error */
1374 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY
);
1375 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
1377 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
1381 priv
->status
&= ~STATUS_RESET_PENDING
;
1385 ("exit - waited too long for master assert stop\n");
1389 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1390 IPW_AUX_HOST_RESET_REG_SW_RESET
);
1392 /* Reset any fatal_error conditions */
1393 ipw2100_reset_fatalerror(priv
);
1395 /* At this point, the adapter is now stopped and disabled */
1396 priv
->status
&= ~(STATUS_RUNNING
| STATUS_ASSOCIATING
|
1397 STATUS_ASSOCIATED
| STATUS_ENABLED
);
1403 * Send the CARD_DISABLE_PHY_OFF command to the card to disable it
1405 * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
1407 * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
1408 * if STATUS_ASSN_LOST is sent.
1410 static int ipw2100_hw_phy_off(struct ipw2100_priv
*priv
)
1413 #define HW_PHY_OFF_LOOP_DELAY (msecs_to_jiffies(50))
1415 struct host_command cmd
= {
1416 .host_command
= CARD_DISABLE_PHY_OFF
,
1417 .host_command_sequence
= 0,
1418 .host_command_length
= 0,
1423 IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
1425 /* Turn off the radio */
1426 err
= ipw2100_hw_send_command(priv
, &cmd
);
1430 for (i
= 0; i
< 2500; i
++) {
1431 read_nic_dword(priv
->net_dev
, IPW2100_CONTROL_REG
, &val1
);
1432 read_nic_dword(priv
->net_dev
, IPW2100_COMMAND
, &val2
);
1434 if ((val1
& IPW2100_CONTROL_PHY_OFF
) &&
1435 (val2
& IPW2100_COMMAND_PHY_OFF
))
1438 schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY
);
1444 static int ipw2100_enable_adapter(struct ipw2100_priv
*priv
)
1446 struct host_command cmd
= {
1447 .host_command
= HOST_COMPLETE
,
1448 .host_command_sequence
= 0,
1449 .host_command_length
= 0
1453 IPW_DEBUG_HC("HOST_COMPLETE\n");
1455 if (priv
->status
& STATUS_ENABLED
)
1458 mutex_lock(&priv
->adapter_mutex
);
1460 if (rf_kill_active(priv
)) {
1461 IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
1465 err
= ipw2100_hw_send_command(priv
, &cmd
);
1467 IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
1471 err
= ipw2100_wait_for_card_state(priv
, IPW_HW_STATE_ENABLED
);
1473 IPW_DEBUG_INFO("%s: card not responding to init command.\n",
1474 priv
->net_dev
->name
);
1478 if (priv
->stop_hang_check
) {
1479 priv
->stop_hang_check
= 0;
1480 schedule_delayed_work(&priv
->hang_check
, HZ
/ 2);
1484 mutex_unlock(&priv
->adapter_mutex
);
1488 static int ipw2100_hw_stop_adapter(struct ipw2100_priv
*priv
)
1490 #define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100))
1492 struct host_command cmd
= {
1493 .host_command
= HOST_PRE_POWER_DOWN
,
1494 .host_command_sequence
= 0,
1495 .host_command_length
= 0,
1500 if (!(priv
->status
& STATUS_RUNNING
))
1503 priv
->status
|= STATUS_STOPPING
;
1505 /* We can only shut down the card if the firmware is operational. So,
1506 * if we haven't reset since a fatal_error, then we can not send the
1507 * shutdown commands. */
1508 if (!priv
->fatal_error
) {
1509 /* First, make sure the adapter is enabled so that the PHY_OFF
1510 * command can shut it down */
1511 ipw2100_enable_adapter(priv
);
1513 err
= ipw2100_hw_phy_off(priv
);
1515 printk(KERN_WARNING DRV_NAME
1516 ": Error disabling radio %d\n", err
);
1519 * If in D0-standby mode going directly to D3 may cause a
1520 * PCI bus violation. Therefore we must change out of the D0
1523 * Sending the PREPARE_FOR_POWER_DOWN will restrict the
1524 * hardware from going into standby mode and will transition
1525 * out of D0-standby if it is already in that state.
1527 * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
1528 * driver upon completion. Once received, the driver can
1529 * proceed to the D3 state.
1531 * Prepare for power down command to fw. This command would
1532 * take HW out of D0-standby and prepare it for D3 state.
1534 * Currently FW does not support event notification for this
1535 * event. Therefore, skip waiting for it. Just wait a fixed
1538 IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
1540 err
= ipw2100_hw_send_command(priv
, &cmd
);
1542 printk(KERN_WARNING DRV_NAME
": "
1543 "%s: Power down command failed: Error %d\n",
1544 priv
->net_dev
->name
, err
);
1546 schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY
);
1549 priv
->status
&= ~STATUS_ENABLED
;
1552 * Set GPIO 3 writable by FW; GPIO 1 writable
1553 * by driver and enable clock
1555 ipw2100_hw_set_gpio(priv
);
1558 * Power down adapter. Sequence:
1559 * 1. Stop master assert (RESET_REG[9]=1)
1560 * 2. Wait for stop master (RESET_REG[8]==1)
1561 * 3. S/w reset assert (RESET_REG[7] = 1)
1564 /* Stop master assert */
1565 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1566 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
1568 /* wait stop master not more than 50 usec.
1569 * Otherwise return error. */
1570 for (i
= 5; i
> 0; i
--) {
1573 /* Check master stop bit */
1574 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
1576 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
1581 printk(KERN_WARNING DRV_NAME
1582 ": %s: Could now power down adapter.\n",
1583 priv
->net_dev
->name
);
1585 /* assert s/w reset */
1586 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1587 IPW_AUX_HOST_RESET_REG_SW_RESET
);
1589 priv
->status
&= ~(STATUS_RUNNING
| STATUS_STOPPING
);
1594 static int ipw2100_disable_adapter(struct ipw2100_priv
*priv
)
1596 struct host_command cmd
= {
1597 .host_command
= CARD_DISABLE
,
1598 .host_command_sequence
= 0,
1599 .host_command_length
= 0
1603 IPW_DEBUG_HC("CARD_DISABLE\n");
1605 if (!(priv
->status
& STATUS_ENABLED
))
1608 /* Make sure we clear the associated state */
1609 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1611 if (!priv
->stop_hang_check
) {
1612 priv
->stop_hang_check
= 1;
1613 cancel_delayed_work(&priv
->hang_check
);
1616 mutex_lock(&priv
->adapter_mutex
);
1618 err
= ipw2100_hw_send_command(priv
, &cmd
);
1620 printk(KERN_WARNING DRV_NAME
1621 ": exit - failed to send CARD_DISABLE command\n");
1625 err
= ipw2100_wait_for_card_state(priv
, IPW_HW_STATE_DISABLED
);
1627 printk(KERN_WARNING DRV_NAME
1628 ": exit - card failed to change to DISABLED\n");
1632 IPW_DEBUG_INFO("TODO: implement scan state machine\n");
1635 mutex_unlock(&priv
->adapter_mutex
);
1639 static int ipw2100_set_scan_options(struct ipw2100_priv
*priv
)
1641 struct host_command cmd
= {
1642 .host_command
= SET_SCAN_OPTIONS
,
1643 .host_command_sequence
= 0,
1644 .host_command_length
= 8
1648 IPW_DEBUG_INFO("enter\n");
1650 IPW_DEBUG_SCAN("setting scan options\n");
1652 cmd
.host_command_parameters
[0] = 0;
1654 if (!(priv
->config
& CFG_ASSOCIATE
))
1655 cmd
.host_command_parameters
[0] |= IPW_SCAN_NOASSOCIATE
;
1656 if ((priv
->ieee
->sec
.flags
& SEC_ENABLED
) && priv
->ieee
->sec
.enabled
)
1657 cmd
.host_command_parameters
[0] |= IPW_SCAN_MIXED_CELL
;
1658 if (priv
->config
& CFG_PASSIVE_SCAN
)
1659 cmd
.host_command_parameters
[0] |= IPW_SCAN_PASSIVE
;
1661 cmd
.host_command_parameters
[1] = priv
->channel_mask
;
1663 err
= ipw2100_hw_send_command(priv
, &cmd
);
1665 IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
1666 cmd
.host_command_parameters
[0]);
1671 static int ipw2100_start_scan(struct ipw2100_priv
*priv
)
1673 struct host_command cmd
= {
1674 .host_command
= BROADCAST_SCAN
,
1675 .host_command_sequence
= 0,
1676 .host_command_length
= 4
1680 IPW_DEBUG_HC("START_SCAN\n");
1682 cmd
.host_command_parameters
[0] = 0;
1684 /* No scanning if in monitor mode */
1685 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
1688 if (priv
->status
& STATUS_SCANNING
) {
1689 IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
1693 IPW_DEBUG_INFO("enter\n");
1695 /* Not clearing here; doing so makes iwlist always return nothing...
1697 * We should modify the table logic to use aging tables vs. clearing
1698 * the table on each scan start.
1700 IPW_DEBUG_SCAN("starting scan\n");
1702 priv
->status
|= STATUS_SCANNING
;
1703 err
= ipw2100_hw_send_command(priv
, &cmd
);
1705 priv
->status
&= ~STATUS_SCANNING
;
1707 IPW_DEBUG_INFO("exit\n");
1712 static const struct libipw_geo ipw_geos
[] = {
1716 .bg
= {{2412, 1}, {2417, 2}, {2422, 3},
1717 {2427, 4}, {2432, 5}, {2437, 6},
1718 {2442, 7}, {2447, 8}, {2452, 9},
1719 {2457, 10}, {2462, 11}, {2467, 12},
1720 {2472, 13}, {2484, 14}},
1724 static int ipw2100_up(struct ipw2100_priv
*priv
, int deferred
)
1726 unsigned long flags
;
1729 u32 ord_len
= sizeof(lock
);
1731 /* Age scan list entries found before suspend */
1732 if (priv
->suspend_time
) {
1733 libipw_networks_age(priv
->ieee
, priv
->suspend_time
);
1734 priv
->suspend_time
= 0;
1737 /* Quiet if manually disabled. */
1738 if (priv
->status
& STATUS_RF_KILL_SW
) {
1739 IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
1740 "switch\n", priv
->net_dev
->name
);
1744 /* the ipw2100 hardware really doesn't want power management delays
1745 * longer than 175usec
1747 pm_qos_update_request(&ipw2100_pm_qos_req
, 175);
1749 /* If the interrupt is enabled, turn it off... */
1750 spin_lock_irqsave(&priv
->low_lock
, flags
);
1751 ipw2100_disable_interrupts(priv
);
1753 /* Reset any fatal_error conditions */
1754 ipw2100_reset_fatalerror(priv
);
1755 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1757 if (priv
->status
& STATUS_POWERED
||
1758 (priv
->status
& STATUS_RESET_PENDING
)) {
1759 /* Power cycle the card ... */
1760 err
= ipw2100_power_cycle_adapter(priv
);
1762 printk(KERN_WARNING DRV_NAME
1763 ": %s: Could not cycle adapter.\n",
1764 priv
->net_dev
->name
);
1768 priv
->status
|= STATUS_POWERED
;
1770 /* Load the firmware, start the clocks, etc. */
1771 err
= ipw2100_start_adapter(priv
);
1773 printk(KERN_ERR DRV_NAME
1774 ": %s: Failed to start the firmware.\n",
1775 priv
->net_dev
->name
);
1779 ipw2100_initialize_ordinals(priv
);
1781 /* Determine capabilities of this particular HW configuration */
1782 err
= ipw2100_get_hw_features(priv
);
1784 printk(KERN_ERR DRV_NAME
1785 ": %s: Failed to determine HW features.\n",
1786 priv
->net_dev
->name
);
1790 /* Initialize the geo */
1791 libipw_set_geo(priv
->ieee
, &ipw_geos
[0]);
1792 priv
->ieee
->freq_band
= LIBIPW_24GHZ_BAND
;
1795 err
= ipw2100_set_ordinal(priv
, IPW_ORD_PERS_DB_LOCK
, &lock
, &ord_len
);
1797 printk(KERN_ERR DRV_NAME
1798 ": %s: Failed to clear ordinal lock.\n",
1799 priv
->net_dev
->name
);
1803 priv
->status
&= ~STATUS_SCANNING
;
1805 if (rf_kill_active(priv
)) {
1806 printk(KERN_INFO
"%s: Radio is disabled by RF switch.\n",
1807 priv
->net_dev
->name
);
1809 if (priv
->stop_rf_kill
) {
1810 priv
->stop_rf_kill
= 0;
1811 schedule_delayed_work(&priv
->rf_kill
,
1812 round_jiffies_relative(HZ
));
1818 /* Turn on the interrupt so that commands can be processed */
1819 ipw2100_enable_interrupts(priv
);
1821 /* Send all of the commands that must be sent prior to
1823 err
= ipw2100_adapter_setup(priv
);
1825 printk(KERN_ERR DRV_NAME
": %s: Failed to start the card.\n",
1826 priv
->net_dev
->name
);
1831 /* Enable the adapter - sends HOST_COMPLETE */
1832 err
= ipw2100_enable_adapter(priv
);
1834 printk(KERN_ERR DRV_NAME
": "
1835 "%s: failed in call to enable adapter.\n",
1836 priv
->net_dev
->name
);
1837 ipw2100_hw_stop_adapter(priv
);
1841 /* Start a scan . . . */
1842 ipw2100_set_scan_options(priv
);
1843 ipw2100_start_scan(priv
);
1850 static void ipw2100_down(struct ipw2100_priv
*priv
)
1852 unsigned long flags
;
1853 union iwreq_data wrqu
= {
1855 .sa_family
= ARPHRD_ETHER
}
1857 int associated
= priv
->status
& STATUS_ASSOCIATED
;
1859 /* Kill the RF switch timer */
1860 if (!priv
->stop_rf_kill
) {
1861 priv
->stop_rf_kill
= 1;
1862 cancel_delayed_work(&priv
->rf_kill
);
1865 /* Kill the firmware hang check timer */
1866 if (!priv
->stop_hang_check
) {
1867 priv
->stop_hang_check
= 1;
1868 cancel_delayed_work(&priv
->hang_check
);
1871 /* Kill any pending resets */
1872 if (priv
->status
& STATUS_RESET_PENDING
)
1873 cancel_delayed_work(&priv
->reset_work
);
1875 /* Make sure the interrupt is on so that FW commands will be
1876 * processed correctly */
1877 spin_lock_irqsave(&priv
->low_lock
, flags
);
1878 ipw2100_enable_interrupts(priv
);
1879 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1881 if (ipw2100_hw_stop_adapter(priv
))
1882 printk(KERN_ERR DRV_NAME
": %s: Error stopping adapter.\n",
1883 priv
->net_dev
->name
);
1885 /* Do not disable the interrupt until _after_ we disable
1886 * the adaptor. Otherwise the CARD_DISABLE command will never
1887 * be ack'd by the firmware */
1888 spin_lock_irqsave(&priv
->low_lock
, flags
);
1889 ipw2100_disable_interrupts(priv
);
1890 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1892 pm_qos_update_request(&ipw2100_pm_qos_req
, PM_QOS_DEFAULT_VALUE
);
1894 /* We have to signal any supplicant if we are disassociating */
1896 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
1898 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1899 netif_carrier_off(priv
->net_dev
);
1900 netif_stop_queue(priv
->net_dev
);
1903 static int ipw2100_wdev_init(struct net_device
*dev
)
1905 struct ipw2100_priv
*priv
= libipw_priv(dev
);
1906 const struct libipw_geo
*geo
= libipw_get_geo(priv
->ieee
);
1907 struct wireless_dev
*wdev
= &priv
->ieee
->wdev
;
1910 memcpy(wdev
->wiphy
->perm_addr
, priv
->mac_addr
, ETH_ALEN
);
1912 /* fill-out priv->ieee->bg_band */
1913 if (geo
->bg_channels
) {
1914 struct ieee80211_supported_band
*bg_band
= &priv
->ieee
->bg_band
;
1916 bg_band
->band
= NL80211_BAND_2GHZ
;
1917 bg_band
->n_channels
= geo
->bg_channels
;
1918 bg_band
->channels
= kcalloc(geo
->bg_channels
,
1919 sizeof(struct ieee80211_channel
),
1921 if (!bg_band
->channels
) {
1925 /* translate geo->bg to bg_band.channels */
1926 for (i
= 0; i
< geo
->bg_channels
; i
++) {
1927 bg_band
->channels
[i
].band
= NL80211_BAND_2GHZ
;
1928 bg_band
->channels
[i
].center_freq
= geo
->bg
[i
].freq
;
1929 bg_band
->channels
[i
].hw_value
= geo
->bg
[i
].channel
;
1930 bg_band
->channels
[i
].max_power
= geo
->bg
[i
].max_power
;
1931 if (geo
->bg
[i
].flags
& LIBIPW_CH_PASSIVE_ONLY
)
1932 bg_band
->channels
[i
].flags
|=
1933 IEEE80211_CHAN_NO_IR
;
1934 if (geo
->bg
[i
].flags
& LIBIPW_CH_NO_IBSS
)
1935 bg_band
->channels
[i
].flags
|=
1936 IEEE80211_CHAN_NO_IR
;
1937 if (geo
->bg
[i
].flags
& LIBIPW_CH_RADAR_DETECT
)
1938 bg_band
->channels
[i
].flags
|=
1939 IEEE80211_CHAN_RADAR
;
1940 /* No equivalent for LIBIPW_CH_80211H_RULES,
1941 LIBIPW_CH_UNIFORM_SPREADING, or
1942 LIBIPW_CH_B_ONLY... */
1944 /* point at bitrate info */
1945 bg_band
->bitrates
= ipw2100_bg_rates
;
1946 bg_band
->n_bitrates
= RATE_COUNT
;
1948 wdev
->wiphy
->bands
[NL80211_BAND_2GHZ
] = bg_band
;
1951 wdev
->wiphy
->cipher_suites
= ipw_cipher_suites
;
1952 wdev
->wiphy
->n_cipher_suites
= ARRAY_SIZE(ipw_cipher_suites
);
1954 set_wiphy_dev(wdev
->wiphy
, &priv
->pci_dev
->dev
);
1955 if (wiphy_register(wdev
->wiphy
))
1960 static void ipw2100_reset_adapter(struct work_struct
*work
)
1962 struct ipw2100_priv
*priv
=
1963 container_of(work
, struct ipw2100_priv
, reset_work
.work
);
1964 unsigned long flags
;
1965 union iwreq_data wrqu
= {
1967 .sa_family
= ARPHRD_ETHER
}
1969 int associated
= priv
->status
& STATUS_ASSOCIATED
;
1971 spin_lock_irqsave(&priv
->low_lock
, flags
);
1972 IPW_DEBUG_INFO(": %s: Restarting adapter.\n", priv
->net_dev
->name
);
1974 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1975 priv
->status
|= STATUS_SECURITY_UPDATED
;
1977 /* Force a power cycle even if interface hasn't been opened
1979 cancel_delayed_work(&priv
->reset_work
);
1980 priv
->status
|= STATUS_RESET_PENDING
;
1981 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1983 mutex_lock(&priv
->action_mutex
);
1984 /* stop timed checks so that they don't interfere with reset */
1985 priv
->stop_hang_check
= 1;
1986 cancel_delayed_work(&priv
->hang_check
);
1988 /* We have to signal any supplicant if we are disassociating */
1990 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
1992 ipw2100_up(priv
, 0);
1993 mutex_unlock(&priv
->action_mutex
);
1997 static void isr_indicate_associated(struct ipw2100_priv
*priv
, u32 status
)
2000 #define MAC_ASSOCIATION_READ_DELAY (HZ)
2002 unsigned int len
, essid_len
;
2003 char essid
[IW_ESSID_MAX_SIZE
];
2010 * TBD: BSSID is usually 00:00:00:00:00:00 here and not
2011 * an actual MAC of the AP. Seems like FW sets this
2012 * address too late. Read it later and expose through
2013 * /proc or schedule a later task to query and update
2016 essid_len
= IW_ESSID_MAX_SIZE
;
2017 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_SSID
,
2020 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2026 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_CURRENT_TX_RATE
, &txrate
, &len
);
2028 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2034 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_OUR_FREQ
, &chan
, &len
);
2036 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2041 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
, bssid
,
2044 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2048 memcpy(priv
->ieee
->bssid
, bssid
, ETH_ALEN
);
2051 case TX_RATE_1_MBIT
:
2052 txratename
= "1Mbps";
2054 case TX_RATE_2_MBIT
:
2055 txratename
= "2Mbsp";
2057 case TX_RATE_5_5_MBIT
:
2058 txratename
= "5.5Mbps";
2060 case TX_RATE_11_MBIT
:
2061 txratename
= "11Mbps";
2064 IPW_DEBUG_INFO("Unknown rate: %d\n", txrate
);
2065 txratename
= "unknown rate";
2069 IPW_DEBUG_INFO("%s: Associated with '%*pE' at %s, channel %d (BSSID=%pM)\n",
2070 priv
->net_dev
->name
, essid_len
, essid
,
2071 txratename
, chan
, bssid
);
2073 /* now we copy read ssid into dev */
2074 if (!(priv
->config
& CFG_STATIC_ESSID
)) {
2075 priv
->essid_len
= min((u8
) essid_len
, (u8
) IW_ESSID_MAX_SIZE
);
2076 memcpy(priv
->essid
, essid
, priv
->essid_len
);
2078 priv
->channel
= chan
;
2079 memcpy(priv
->bssid
, bssid
, ETH_ALEN
);
2081 priv
->status
|= STATUS_ASSOCIATING
;
2082 priv
->connect_start
= get_seconds();
2084 schedule_delayed_work(&priv
->wx_event_work
, HZ
/ 10);
2087 static int ipw2100_set_essid(struct ipw2100_priv
*priv
, char *essid
,
2088 int length
, int batch_mode
)
2090 int ssid_len
= min(length
, IW_ESSID_MAX_SIZE
);
2091 struct host_command cmd
= {
2092 .host_command
= SSID
,
2093 .host_command_sequence
= 0,
2094 .host_command_length
= ssid_len
2098 IPW_DEBUG_HC("SSID: '%*pE'\n", ssid_len
, essid
);
2101 memcpy(cmd
.host_command_parameters
, essid
, ssid_len
);
2104 err
= ipw2100_disable_adapter(priv
);
2109 /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
2110 * disable auto association -- so we cheat by setting a bogus SSID */
2111 if (!ssid_len
&& !(priv
->config
& CFG_ASSOCIATE
)) {
2113 u8
*bogus
= (u8
*) cmd
.host_command_parameters
;
2114 for (i
= 0; i
< IW_ESSID_MAX_SIZE
; i
++)
2115 bogus
[i
] = 0x18 + i
;
2116 cmd
.host_command_length
= IW_ESSID_MAX_SIZE
;
2119 /* NOTE: We always send the SSID command even if the provided ESSID is
2120 * the same as what we currently think is set. */
2122 err
= ipw2100_hw_send_command(priv
, &cmd
);
2124 memset(priv
->essid
+ ssid_len
, 0, IW_ESSID_MAX_SIZE
- ssid_len
);
2125 memcpy(priv
->essid
, essid
, ssid_len
);
2126 priv
->essid_len
= ssid_len
;
2130 if (ipw2100_enable_adapter(priv
))
2137 static void isr_indicate_association_lost(struct ipw2100_priv
*priv
, u32 status
)
2139 IPW_DEBUG(IPW_DL_NOTIF
| IPW_DL_STATE
| IPW_DL_ASSOC
,
2140 "disassociated: '%*pE' %pM\n", priv
->essid_len
, priv
->essid
,
2143 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
2145 if (priv
->status
& STATUS_STOPPING
) {
2146 IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
2150 eth_zero_addr(priv
->bssid
);
2151 eth_zero_addr(priv
->ieee
->bssid
);
2153 netif_carrier_off(priv
->net_dev
);
2154 netif_stop_queue(priv
->net_dev
);
2156 if (!(priv
->status
& STATUS_RUNNING
))
2159 if (priv
->status
& STATUS_SECURITY_UPDATED
)
2160 schedule_delayed_work(&priv
->security_work
, 0);
2162 schedule_delayed_work(&priv
->wx_event_work
, 0);
2165 static void isr_indicate_rf_kill(struct ipw2100_priv
*priv
, u32 status
)
2167 IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
2168 priv
->net_dev
->name
);
2170 /* RF_KILL is now enabled (else we wouldn't be here) */
2171 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, true);
2172 priv
->status
|= STATUS_RF_KILL_HW
;
2174 /* Make sure the RF Kill check timer is running */
2175 priv
->stop_rf_kill
= 0;
2176 mod_delayed_work(system_wq
, &priv
->rf_kill
, round_jiffies_relative(HZ
));
2179 static void ipw2100_scan_event(struct work_struct
*work
)
2181 struct ipw2100_priv
*priv
= container_of(work
, struct ipw2100_priv
,
2183 union iwreq_data wrqu
;
2185 wrqu
.data
.length
= 0;
2186 wrqu
.data
.flags
= 0;
2187 wireless_send_event(priv
->net_dev
, SIOCGIWSCAN
, &wrqu
, NULL
);
2190 static void isr_scan_complete(struct ipw2100_priv
*priv
, u32 status
)
2192 IPW_DEBUG_SCAN("scan complete\n");
2193 /* Age the scan results... */
2194 priv
->ieee
->scans
++;
2195 priv
->status
&= ~STATUS_SCANNING
;
2197 /* Only userspace-requested scan completion events go out immediately */
2198 if (!priv
->user_requested_scan
) {
2199 schedule_delayed_work(&priv
->scan_event
,
2200 round_jiffies_relative(msecs_to_jiffies(4000)));
2202 priv
->user_requested_scan
= 0;
2203 mod_delayed_work(system_wq
, &priv
->scan_event
, 0);
2207 #ifdef CONFIG_IPW2100_DEBUG
2208 #define IPW2100_HANDLER(v, f) { v, f, # v }
2209 struct ipw2100_status_indicator
{
2211 void (*cb
) (struct ipw2100_priv
* priv
, u32 status
);
2215 #define IPW2100_HANDLER(v, f) { v, f }
2216 struct ipw2100_status_indicator
{
2218 void (*cb
) (struct ipw2100_priv
* priv
, u32 status
);
2220 #endif /* CONFIG_IPW2100_DEBUG */
2222 static void isr_indicate_scanning(struct ipw2100_priv
*priv
, u32 status
)
2224 IPW_DEBUG_SCAN("Scanning...\n");
2225 priv
->status
|= STATUS_SCANNING
;
2228 static const struct ipw2100_status_indicator status_handlers
[] = {
2229 IPW2100_HANDLER(IPW_STATE_INITIALIZED
, NULL
),
2230 IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND
, NULL
),
2231 IPW2100_HANDLER(IPW_STATE_ASSOCIATED
, isr_indicate_associated
),
2232 IPW2100_HANDLER(IPW_STATE_ASSN_LOST
, isr_indicate_association_lost
),
2233 IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED
, NULL
),
2234 IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE
, isr_scan_complete
),
2235 IPW2100_HANDLER(IPW_STATE_ENTERED_PSP
, NULL
),
2236 IPW2100_HANDLER(IPW_STATE_LEFT_PSP
, NULL
),
2237 IPW2100_HANDLER(IPW_STATE_RF_KILL
, isr_indicate_rf_kill
),
2238 IPW2100_HANDLER(IPW_STATE_DISABLED
, NULL
),
2239 IPW2100_HANDLER(IPW_STATE_POWER_DOWN
, NULL
),
2240 IPW2100_HANDLER(IPW_STATE_SCANNING
, isr_indicate_scanning
),
2241 IPW2100_HANDLER(-1, NULL
)
2244 static void isr_status_change(struct ipw2100_priv
*priv
, int status
)
2248 if (status
== IPW_STATE_SCANNING
&&
2249 priv
->status
& STATUS_ASSOCIATED
&&
2250 !(priv
->status
& STATUS_SCANNING
)) {
2251 IPW_DEBUG_INFO("Scan detected while associated, with "
2252 "no scan request. Restarting firmware.\n");
2254 /* Wake up any sleeping jobs */
2255 schedule_reset(priv
);
2258 for (i
= 0; status_handlers
[i
].status
!= -1; i
++) {
2259 if (status
== status_handlers
[i
].status
) {
2260 IPW_DEBUG_NOTIF("Status change: %s\n",
2261 status_handlers
[i
].name
);
2262 if (status_handlers
[i
].cb
)
2263 status_handlers
[i
].cb(priv
, status
);
2264 priv
->wstats
.status
= status
;
2269 IPW_DEBUG_NOTIF("unknown status received: %04x\n", status
);
2272 static void isr_rx_complete_command(struct ipw2100_priv
*priv
,
2273 struct ipw2100_cmd_header
*cmd
)
2275 #ifdef CONFIG_IPW2100_DEBUG
2276 if (cmd
->host_command_reg
< ARRAY_SIZE(command_types
)) {
2277 IPW_DEBUG_HC("Command completed '%s (%d)'\n",
2278 command_types
[cmd
->host_command_reg
],
2279 cmd
->host_command_reg
);
2282 if (cmd
->host_command_reg
== HOST_COMPLETE
)
2283 priv
->status
|= STATUS_ENABLED
;
2285 if (cmd
->host_command_reg
== CARD_DISABLE
)
2286 priv
->status
&= ~STATUS_ENABLED
;
2288 priv
->status
&= ~STATUS_CMD_ACTIVE
;
2290 wake_up_interruptible(&priv
->wait_command_queue
);
2293 #ifdef CONFIG_IPW2100_DEBUG
2294 static const char *frame_types
[] = {
2295 "COMMAND_STATUS_VAL",
2296 "STATUS_CHANGE_VAL",
2299 "HOST_NOTIFICATION_VAL"
2303 static int ipw2100_alloc_skb(struct ipw2100_priv
*priv
,
2304 struct ipw2100_rx_packet
*packet
)
2306 packet
->skb
= dev_alloc_skb(sizeof(struct ipw2100_rx
));
2310 packet
->rxp
= (struct ipw2100_rx
*)packet
->skb
->data
;
2311 packet
->dma_addr
= pci_map_single(priv
->pci_dev
, packet
->skb
->data
,
2312 sizeof(struct ipw2100_rx
),
2313 PCI_DMA_FROMDEVICE
);
2314 if (pci_dma_mapping_error(priv
->pci_dev
, packet
->dma_addr
)) {
2315 dev_kfree_skb(packet
->skb
);
2322 #define SEARCH_ERROR 0xffffffff
2323 #define SEARCH_FAIL 0xfffffffe
2324 #define SEARCH_SUCCESS 0xfffffff0
2325 #define SEARCH_DISCARD 0
2326 #define SEARCH_SNAPSHOT 1
2328 #define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
2329 static void ipw2100_snapshot_free(struct ipw2100_priv
*priv
)
2332 if (!priv
->snapshot
[0])
2334 for (i
= 0; i
< 0x30; i
++)
2335 kfree(priv
->snapshot
[i
]);
2336 priv
->snapshot
[0] = NULL
;
2339 #ifdef IPW2100_DEBUG_C3
2340 static int ipw2100_snapshot_alloc(struct ipw2100_priv
*priv
)
2343 if (priv
->snapshot
[0])
2345 for (i
= 0; i
< 0x30; i
++) {
2346 priv
->snapshot
[i
] = kmalloc(0x1000, GFP_ATOMIC
);
2347 if (!priv
->snapshot
[i
]) {
2348 IPW_DEBUG_INFO("%s: Error allocating snapshot "
2349 "buffer %d\n", priv
->net_dev
->name
, i
);
2351 kfree(priv
->snapshot
[--i
]);
2352 priv
->snapshot
[0] = NULL
;
2360 static u32
ipw2100_match_buf(struct ipw2100_priv
*priv
, u8
* in_buf
,
2361 size_t len
, int mode
)
2369 if (mode
== SEARCH_SNAPSHOT
) {
2370 if (!ipw2100_snapshot_alloc(priv
))
2371 mode
= SEARCH_DISCARD
;
2374 for (ret
= SEARCH_FAIL
, i
= 0; i
< 0x30000; i
+= 4) {
2375 read_nic_dword(priv
->net_dev
, i
, &tmp
);
2376 if (mode
== SEARCH_SNAPSHOT
)
2377 *(u32
*) SNAPSHOT_ADDR(i
) = tmp
;
2378 if (ret
== SEARCH_FAIL
) {
2380 for (j
= 0; j
< 4; j
++) {
2389 if ((s
- in_buf
) == len
)
2390 ret
= (i
+ j
) - len
+ 1;
2392 } else if (mode
== SEARCH_DISCARD
)
2402 * 0) Disconnect the SKB from the firmware (just unmap)
2403 * 1) Pack the ETH header into the SKB
2404 * 2) Pass the SKB to the network stack
2406 * When packet is provided by the firmware, it contains the following:
2411 * The size of the constructed ethernet
2414 #ifdef IPW2100_RX_DEBUG
2415 static u8 packet_data
[IPW_RX_NIC_BUFFER_LENGTH
];
2418 static void ipw2100_corruption_detected(struct ipw2100_priv
*priv
, int i
)
2420 #ifdef IPW2100_DEBUG_C3
2421 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2426 IPW_DEBUG_INFO(": PCI latency error detected at 0x%04zX.\n",
2427 i
* sizeof(struct ipw2100_status
));
2429 #ifdef IPW2100_DEBUG_C3
2430 /* Halt the firmware so we can get a good image */
2431 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
2432 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
2435 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY
);
2436 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
2438 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
2442 match
= ipw2100_match_buf(priv
, (u8
*) status
,
2443 sizeof(struct ipw2100_status
),
2445 if (match
< SEARCH_SUCCESS
)
2446 IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
2447 "offset 0x%06X, length %d:\n",
2448 priv
->net_dev
->name
, match
,
2449 sizeof(struct ipw2100_status
));
2451 IPW_DEBUG_INFO("%s: No DMA status match in "
2452 "Firmware.\n", priv
->net_dev
->name
);
2454 printk_buf((u8
*) priv
->status_queue
.drv
,
2455 sizeof(struct ipw2100_status
) * RX_QUEUE_LENGTH
);
2458 priv
->fatal_error
= IPW2100_ERR_C3_CORRUPTION
;
2459 priv
->net_dev
->stats
.rx_errors
++;
2460 schedule_reset(priv
);
2463 static void isr_rx(struct ipw2100_priv
*priv
, int i
,
2464 struct libipw_rx_stats
*stats
)
2466 struct net_device
*dev
= priv
->net_dev
;
2467 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2468 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
2470 IPW_DEBUG_RX("Handler...\n");
2472 if (unlikely(status
->frame_size
> skb_tailroom(packet
->skb
))) {
2473 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2476 status
->frame_size
, skb_tailroom(packet
->skb
));
2477 dev
->stats
.rx_errors
++;
2481 if (unlikely(!netif_running(dev
))) {
2482 dev
->stats
.rx_errors
++;
2483 priv
->wstats
.discard
.misc
++;
2484 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2488 if (unlikely(priv
->ieee
->iw_mode
!= IW_MODE_MONITOR
&&
2489 !(priv
->status
& STATUS_ASSOCIATED
))) {
2490 IPW_DEBUG_DROP("Dropping packet while not associated.\n");
2491 priv
->wstats
.discard
.misc
++;
2495 pci_unmap_single(priv
->pci_dev
,
2497 sizeof(struct ipw2100_rx
), PCI_DMA_FROMDEVICE
);
2499 skb_put(packet
->skb
, status
->frame_size
);
2501 #ifdef IPW2100_RX_DEBUG
2502 /* Make a copy of the frame so we can dump it to the logs if
2503 * libipw_rx fails */
2504 skb_copy_from_linear_data(packet
->skb
, packet_data
,
2505 min_t(u32
, status
->frame_size
,
2506 IPW_RX_NIC_BUFFER_LENGTH
));
2509 if (!libipw_rx(priv
->ieee
, packet
->skb
, stats
)) {
2510 #ifdef IPW2100_RX_DEBUG
2511 IPW_DEBUG_DROP("%s: Non consumed packet:\n",
2513 printk_buf(IPW_DL_DROP
, packet_data
, status
->frame_size
);
2515 dev
->stats
.rx_errors
++;
2517 /* libipw_rx failed, so it didn't free the SKB */
2518 dev_kfree_skb_any(packet
->skb
);
2522 /* We need to allocate a new SKB and attach it to the RDB. */
2523 if (unlikely(ipw2100_alloc_skb(priv
, packet
))) {
2524 printk(KERN_WARNING DRV_NAME
": "
2525 "%s: Unable to allocate SKB onto RBD ring - disabling "
2526 "adapter.\n", dev
->name
);
2527 /* TODO: schedule adapter shutdown */
2528 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2531 /* Update the RDB entry */
2532 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
2535 #ifdef CONFIG_IPW2100_MONITOR
2537 static void isr_rx_monitor(struct ipw2100_priv
*priv
, int i
,
2538 struct libipw_rx_stats
*stats
)
2540 struct net_device
*dev
= priv
->net_dev
;
2541 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2542 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
2544 /* Magic struct that slots into the radiotap header -- no reason
2545 * to build this manually element by element, we can write it much
2546 * more efficiently than we can parse it. ORDER MATTERS HERE */
2548 struct ieee80211_radiotap_header rt_hdr
;
2549 s8 rt_dbmsignal
; /* signal in dbM, kluged to signed */
2552 IPW_DEBUG_RX("Handler...\n");
2554 if (unlikely(status
->frame_size
> skb_tailroom(packet
->skb
) -
2555 sizeof(struct ipw_rt_hdr
))) {
2556 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2560 skb_tailroom(packet
->skb
));
2561 dev
->stats
.rx_errors
++;
2565 if (unlikely(!netif_running(dev
))) {
2566 dev
->stats
.rx_errors
++;
2567 priv
->wstats
.discard
.misc
++;
2568 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2572 if (unlikely(priv
->config
& CFG_CRC_CHECK
&&
2573 status
->flags
& IPW_STATUS_FLAG_CRC_ERROR
)) {
2574 IPW_DEBUG_RX("CRC error in packet. Dropping.\n");
2575 dev
->stats
.rx_errors
++;
2579 pci_unmap_single(priv
->pci_dev
, packet
->dma_addr
,
2580 sizeof(struct ipw2100_rx
), PCI_DMA_FROMDEVICE
);
2581 memmove(packet
->skb
->data
+ sizeof(struct ipw_rt_hdr
),
2582 packet
->skb
->data
, status
->frame_size
);
2584 ipw_rt
= (struct ipw_rt_hdr
*) packet
->skb
->data
;
2586 ipw_rt
->rt_hdr
.it_version
= PKTHDR_RADIOTAP_VERSION
;
2587 ipw_rt
->rt_hdr
.it_pad
= 0; /* always good to zero */
2588 ipw_rt
->rt_hdr
.it_len
= cpu_to_le16(sizeof(struct ipw_rt_hdr
)); /* total hdr+data */
2590 ipw_rt
->rt_hdr
.it_present
= cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL
);
2592 ipw_rt
->rt_dbmsignal
= status
->rssi
+ IPW2100_RSSI_TO_DBM
;
2594 skb_put(packet
->skb
, status
->frame_size
+ sizeof(struct ipw_rt_hdr
));
2596 if (!libipw_rx(priv
->ieee
, packet
->skb
, stats
)) {
2597 dev
->stats
.rx_errors
++;
2599 /* libipw_rx failed, so it didn't free the SKB */
2600 dev_kfree_skb_any(packet
->skb
);
2604 /* We need to allocate a new SKB and attach it to the RDB. */
2605 if (unlikely(ipw2100_alloc_skb(priv
, packet
))) {
2607 "%s: Unable to allocate SKB onto RBD ring - disabling "
2608 "adapter.\n", dev
->name
);
2609 /* TODO: schedule adapter shutdown */
2610 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2613 /* Update the RDB entry */
2614 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
2619 static int ipw2100_corruption_check(struct ipw2100_priv
*priv
, int i
)
2621 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2622 struct ipw2100_rx
*u
= priv
->rx_buffers
[i
].rxp
;
2623 u16 frame_type
= status
->status_fields
& STATUS_TYPE_MASK
;
2625 switch (frame_type
) {
2626 case COMMAND_STATUS_VAL
:
2627 return (status
->frame_size
!= sizeof(u
->rx_data
.command
));
2628 case STATUS_CHANGE_VAL
:
2629 return (status
->frame_size
!= sizeof(u
->rx_data
.status
));
2630 case HOST_NOTIFICATION_VAL
:
2631 return (status
->frame_size
< sizeof(u
->rx_data
.notification
));
2632 case P80211_DATA_VAL
:
2633 case P8023_DATA_VAL
:
2634 #ifdef CONFIG_IPW2100_MONITOR
2637 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u
->rx_data
.header
.frame_ctl
))) {
2638 case IEEE80211_FTYPE_MGMT
:
2639 case IEEE80211_FTYPE_CTL
:
2641 case IEEE80211_FTYPE_DATA
:
2642 return (status
->frame_size
>
2643 IPW_MAX_802_11_PAYLOAD_LENGTH
);
2652 * ipw2100 interrupts are disabled at this point, and the ISR
2653 * is the only code that calls this method. So, we do not need
2654 * to play with any locks.
2656 * RX Queue works as follows:
2658 * Read index - firmware places packet in entry identified by the
2659 * Read index and advances Read index. In this manner,
2660 * Read index will always point to the next packet to
2661 * be filled--but not yet valid.
2663 * Write index - driver fills this entry with an unused RBD entry.
2664 * This entry has not filled by the firmware yet.
2666 * In between the W and R indexes are the RBDs that have been received
2667 * but not yet processed.
2669 * The process of handling packets will start at WRITE + 1 and advance
2670 * until it reaches the READ index.
2672 * The WRITE index is cached in the variable 'priv->rx_queue.next'.
2675 static void __ipw2100_rx_process(struct ipw2100_priv
*priv
)
2677 struct ipw2100_bd_queue
*rxq
= &priv
->rx_queue
;
2678 struct ipw2100_status_queue
*sq
= &priv
->status_queue
;
2679 struct ipw2100_rx_packet
*packet
;
2682 struct ipw2100_rx
*u
;
2683 struct libipw_rx_stats stats
= {
2684 .mac_time
= jiffies
,
2687 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_READ_INDEX
, &r
);
2688 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
, &w
);
2690 if (r
>= rxq
->entries
) {
2691 IPW_DEBUG_RX("exit - bad read index\n");
2695 i
= (rxq
->next
+ 1) % rxq
->entries
;
2698 /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
2699 r, rxq->next, i); */
2701 packet
= &priv
->rx_buffers
[i
];
2703 /* Sync the DMA for the RX buffer so CPU is sure to get
2704 * the correct values */
2705 pci_dma_sync_single_for_cpu(priv
->pci_dev
, packet
->dma_addr
,
2706 sizeof(struct ipw2100_rx
),
2707 PCI_DMA_FROMDEVICE
);
2709 if (unlikely(ipw2100_corruption_check(priv
, i
))) {
2710 ipw2100_corruption_detected(priv
, i
);
2715 frame_type
= sq
->drv
[i
].status_fields
& STATUS_TYPE_MASK
;
2716 stats
.rssi
= sq
->drv
[i
].rssi
+ IPW2100_RSSI_TO_DBM
;
2717 stats
.len
= sq
->drv
[i
].frame_size
;
2720 if (stats
.rssi
!= 0)
2721 stats
.mask
|= LIBIPW_STATMASK_RSSI
;
2722 stats
.freq
= LIBIPW_24GHZ_BAND
;
2724 IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n",
2725 priv
->net_dev
->name
, frame_types
[frame_type
],
2728 switch (frame_type
) {
2729 case COMMAND_STATUS_VAL
:
2730 /* Reset Rx watchdog */
2731 isr_rx_complete_command(priv
, &u
->rx_data
.command
);
2734 case STATUS_CHANGE_VAL
:
2735 isr_status_change(priv
, u
->rx_data
.status
);
2738 case P80211_DATA_VAL
:
2739 case P8023_DATA_VAL
:
2740 #ifdef CONFIG_IPW2100_MONITOR
2741 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
2742 isr_rx_monitor(priv
, i
, &stats
);
2746 if (stats
.len
< sizeof(struct libipw_hdr_3addr
))
2748 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u
->rx_data
.header
.frame_ctl
))) {
2749 case IEEE80211_FTYPE_MGMT
:
2750 libipw_rx_mgt(priv
->ieee
,
2751 &u
->rx_data
.header
, &stats
);
2754 case IEEE80211_FTYPE_CTL
:
2757 case IEEE80211_FTYPE_DATA
:
2758 isr_rx(priv
, i
, &stats
);
2766 /* clear status field associated with this RBD */
2767 rxq
->drv
[i
].status
.info
.field
= 0;
2769 i
= (i
+ 1) % rxq
->entries
;
2773 /* backtrack one entry, wrapping to end if at 0 */
2774 rxq
->next
= (i
? i
: rxq
->entries
) - 1;
2776 write_register(priv
->net_dev
,
2777 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
, rxq
->next
);
2782 * __ipw2100_tx_process
2784 * This routine will determine whether the next packet on
2785 * the fw_pend_list has been processed by the firmware yet.
2787 * If not, then it does nothing and returns.
2789 * If so, then it removes the item from the fw_pend_list, frees
2790 * any associated storage, and places the item back on the
2791 * free list of its source (either msg_free_list or tx_free_list)
2793 * TX Queue works as follows:
2795 * Read index - points to the next TBD that the firmware will
2796 * process. The firmware will read the data, and once
2797 * done processing, it will advance the Read index.
2799 * Write index - driver fills this entry with an constructed TBD
2800 * entry. The Write index is not advanced until the
2801 * packet has been configured.
2803 * In between the W and R indexes are the TBDs that have NOT been
2804 * processed. Lagging behind the R index are packets that have
2805 * been processed but have not been freed by the driver.
2807 * In order to free old storage, an internal index will be maintained
2808 * that points to the next packet to be freed. When all used
2809 * packets have been freed, the oldest index will be the same as the
2810 * firmware's read index.
2812 * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
2814 * Because the TBD structure can not contain arbitrary data, the
2815 * driver must keep an internal queue of cached allocations such that
2816 * it can put that data back into the tx_free_list and msg_free_list
2817 * for use by future command and data packets.
2820 static int __ipw2100_tx_process(struct ipw2100_priv
*priv
)
2822 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
2823 struct ipw2100_bd
*tbd
;
2824 struct list_head
*element
;
2825 struct ipw2100_tx_packet
*packet
;
2826 int descriptors_used
;
2828 u32 r
, w
, frag_num
= 0;
2830 if (list_empty(&priv
->fw_pend_list
))
2833 element
= priv
->fw_pend_list
.next
;
2835 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
2836 tbd
= &txq
->drv
[packet
->index
];
2838 /* Determine how many TBD entries must be finished... */
2839 switch (packet
->type
) {
2841 /* COMMAND uses only one slot; don't advance */
2842 descriptors_used
= 1;
2847 /* DATA uses two slots; advance and loop position. */
2848 descriptors_used
= tbd
->num_fragments
;
2849 frag_num
= tbd
->num_fragments
- 1;
2850 e
= txq
->oldest
+ frag_num
;
2855 printk(KERN_WARNING DRV_NAME
": %s: Bad fw_pend_list entry!\n",
2856 priv
->net_dev
->name
);
2860 /* if the last TBD is not done by NIC yet, then packet is
2861 * not ready to be released.
2864 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX
,
2866 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
2869 printk(KERN_WARNING DRV_NAME
": %s: write index mismatch\n",
2870 priv
->net_dev
->name
);
2873 * txq->next is the index of the last packet written txq->oldest is
2874 * the index of the r is the index of the next packet to be read by
2879 * Quick graphic to help you visualize the following
2880 * if / else statement
2882 * ===>| s---->|===============
2884 * | a | b | c | d | e | f | g | h | i | j | k | l
2888 * w - updated by driver
2889 * r - updated by firmware
2890 * s - start of oldest BD entry (txq->oldest)
2891 * e - end of oldest BD entry
2894 if (!((r
<= w
&& (e
< r
|| e
>= w
)) || (e
< r
&& e
>= w
))) {
2895 IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
2900 DEC_STAT(&priv
->fw_pend_stat
);
2902 #ifdef CONFIG_IPW2100_DEBUG
2905 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i
,
2907 (u32
) (txq
->nic
+ i
* sizeof(struct ipw2100_bd
)),
2908 txq
->drv
[i
].host_addr
, txq
->drv
[i
].buf_length
);
2910 if (packet
->type
== DATA
) {
2911 i
= (i
+ 1) % txq
->entries
;
2913 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i
,
2915 (u32
) (txq
->nic
+ i
*
2916 sizeof(struct ipw2100_bd
)),
2917 (u32
) txq
->drv
[i
].host_addr
,
2918 txq
->drv
[i
].buf_length
);
2923 switch (packet
->type
) {
2925 if (txq
->drv
[txq
->oldest
].status
.info
.fields
.txType
!= 0)
2926 printk(KERN_WARNING DRV_NAME
": %s: Queue mismatch. "
2927 "Expecting DATA TBD but pulled "
2928 "something else: ids %d=%d.\n",
2929 priv
->net_dev
->name
, txq
->oldest
, packet
->index
);
2931 /* DATA packet; we have to unmap and free the SKB */
2932 for (i
= 0; i
< frag_num
; i
++) {
2933 tbd
= &txq
->drv
[(packet
->index
+ 1 + i
) % txq
->entries
];
2935 IPW_DEBUG_TX("TX%d P=%08x L=%d\n",
2936 (packet
->index
+ 1 + i
) % txq
->entries
,
2937 tbd
->host_addr
, tbd
->buf_length
);
2939 pci_unmap_single(priv
->pci_dev
,
2941 tbd
->buf_length
, PCI_DMA_TODEVICE
);
2944 libipw_txb_free(packet
->info
.d_struct
.txb
);
2945 packet
->info
.d_struct
.txb
= NULL
;
2947 list_add_tail(element
, &priv
->tx_free_list
);
2948 INC_STAT(&priv
->tx_free_stat
);
2950 /* We have a free slot in the Tx queue, so wake up the
2951 * transmit layer if it is stopped. */
2952 if (priv
->status
& STATUS_ASSOCIATED
)
2953 netif_wake_queue(priv
->net_dev
);
2955 /* A packet was processed by the hardware, so update the
2957 netif_trans_update(priv
->net_dev
);
2962 if (txq
->drv
[txq
->oldest
].status
.info
.fields
.txType
!= 1)
2963 printk(KERN_WARNING DRV_NAME
": %s: Queue mismatch. "
2964 "Expecting COMMAND TBD but pulled "
2965 "something else: ids %d=%d.\n",
2966 priv
->net_dev
->name
, txq
->oldest
, packet
->index
);
2968 #ifdef CONFIG_IPW2100_DEBUG
2969 if (packet
->info
.c_struct
.cmd
->host_command_reg
<
2970 ARRAY_SIZE(command_types
))
2971 IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n",
2972 command_types
[packet
->info
.c_struct
.cmd
->
2974 packet
->info
.c_struct
.cmd
->
2976 packet
->info
.c_struct
.cmd
->cmd_status_reg
);
2979 list_add_tail(element
, &priv
->msg_free_list
);
2980 INC_STAT(&priv
->msg_free_stat
);
2984 /* advance oldest used TBD pointer to start of next entry */
2985 txq
->oldest
= (e
+ 1) % txq
->entries
;
2986 /* increase available TBDs number */
2987 txq
->available
+= descriptors_used
;
2988 SET_STAT(&priv
->txq_stat
, txq
->available
);
2990 IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n",
2991 jiffies
- packet
->jiffy_start
);
2993 return (!list_empty(&priv
->fw_pend_list
));
2996 static inline void __ipw2100_tx_complete(struct ipw2100_priv
*priv
)
3000 while (__ipw2100_tx_process(priv
) && i
< 200)
3004 printk(KERN_WARNING DRV_NAME
": "
3005 "%s: Driver is running slow (%d iters).\n",
3006 priv
->net_dev
->name
, i
);
3010 static void ipw2100_tx_send_commands(struct ipw2100_priv
*priv
)
3012 struct list_head
*element
;
3013 struct ipw2100_tx_packet
*packet
;
3014 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
3015 struct ipw2100_bd
*tbd
;
3016 int next
= txq
->next
;
3018 while (!list_empty(&priv
->msg_pend_list
)) {
3019 /* if there isn't enough space in TBD queue, then
3020 * don't stuff a new one in.
3021 * NOTE: 3 are needed as a command will take one,
3022 * and there is a minimum of 2 that must be
3023 * maintained between the r and w indexes
3025 if (txq
->available
<= 3) {
3026 IPW_DEBUG_TX("no room in tx_queue\n");
3030 element
= priv
->msg_pend_list
.next
;
3032 DEC_STAT(&priv
->msg_pend_stat
);
3034 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3036 IPW_DEBUG_TX("using TBD at virt=%p, phys=%04X\n",
3037 &txq
->drv
[txq
->next
],
3038 (u32
) (txq
->nic
+ txq
->next
*
3039 sizeof(struct ipw2100_bd
)));
3041 packet
->index
= txq
->next
;
3043 tbd
= &txq
->drv
[txq
->next
];
3045 /* initialize TBD */
3046 tbd
->host_addr
= packet
->info
.c_struct
.cmd_phys
;
3047 tbd
->buf_length
= sizeof(struct ipw2100_cmd_header
);
3048 /* not marking number of fragments causes problems
3049 * with f/w debug version */
3050 tbd
->num_fragments
= 1;
3051 tbd
->status
.info
.field
=
3052 IPW_BD_STATUS_TX_FRAME_COMMAND
|
3053 IPW_BD_STATUS_TX_INTERRUPT_ENABLE
;
3055 /* update TBD queue counters */
3057 txq
->next
%= txq
->entries
;
3059 DEC_STAT(&priv
->txq_stat
);
3061 list_add_tail(element
, &priv
->fw_pend_list
);
3062 INC_STAT(&priv
->fw_pend_stat
);
3065 if (txq
->next
!= next
) {
3066 /* kick off the DMA by notifying firmware the
3067 * write index has moved; make sure TBD stores are sync'd */
3069 write_register(priv
->net_dev
,
3070 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
3076 * ipw2100_tx_send_data
3079 static void ipw2100_tx_send_data(struct ipw2100_priv
*priv
)
3081 struct list_head
*element
;
3082 struct ipw2100_tx_packet
*packet
;
3083 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
3084 struct ipw2100_bd
*tbd
;
3085 int next
= txq
->next
;
3087 struct ipw2100_data_header
*ipw_hdr
;
3088 struct libipw_hdr_3addr
*hdr
;
3090 while (!list_empty(&priv
->tx_pend_list
)) {
3091 /* if there isn't enough space in TBD queue, then
3092 * don't stuff a new one in.
3093 * NOTE: 4 are needed as a data will take two,
3094 * and there is a minimum of 2 that must be
3095 * maintained between the r and w indexes
3097 element
= priv
->tx_pend_list
.next
;
3098 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3100 if (unlikely(1 + packet
->info
.d_struct
.txb
->nr_frags
>
3102 /* TODO: Support merging buffers if more than
3103 * IPW_MAX_BDS are used */
3104 IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. "
3105 "Increase fragmentation level.\n",
3106 priv
->net_dev
->name
);
3109 if (txq
->available
<= 3 + packet
->info
.d_struct
.txb
->nr_frags
) {
3110 IPW_DEBUG_TX("no room in tx_queue\n");
3115 DEC_STAT(&priv
->tx_pend_stat
);
3117 tbd
= &txq
->drv
[txq
->next
];
3119 packet
->index
= txq
->next
;
3121 ipw_hdr
= packet
->info
.d_struct
.data
;
3122 hdr
= (struct libipw_hdr_3addr
*)packet
->info
.d_struct
.txb
->
3125 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
) {
3126 /* To DS: Addr1 = BSSID, Addr2 = SA,
3128 memcpy(ipw_hdr
->src_addr
, hdr
->addr2
, ETH_ALEN
);
3129 memcpy(ipw_hdr
->dst_addr
, hdr
->addr3
, ETH_ALEN
);
3130 } else if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
3131 /* not From/To DS: Addr1 = DA, Addr2 = SA,
3133 memcpy(ipw_hdr
->src_addr
, hdr
->addr2
, ETH_ALEN
);
3134 memcpy(ipw_hdr
->dst_addr
, hdr
->addr1
, ETH_ALEN
);
3137 ipw_hdr
->host_command_reg
= SEND
;
3138 ipw_hdr
->host_command_reg1
= 0;
3140 /* For now we only support host based encryption */
3141 ipw_hdr
->needs_encryption
= 0;
3142 ipw_hdr
->encrypted
= packet
->info
.d_struct
.txb
->encrypted
;
3143 if (packet
->info
.d_struct
.txb
->nr_frags
> 1)
3144 ipw_hdr
->fragment_size
=
3145 packet
->info
.d_struct
.txb
->frag_size
-
3148 ipw_hdr
->fragment_size
= 0;
3150 tbd
->host_addr
= packet
->info
.d_struct
.data_phys
;
3151 tbd
->buf_length
= sizeof(struct ipw2100_data_header
);
3152 tbd
->num_fragments
= 1 + packet
->info
.d_struct
.txb
->nr_frags
;
3153 tbd
->status
.info
.field
=
3154 IPW_BD_STATUS_TX_FRAME_802_3
|
3155 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT
;
3157 txq
->next
%= txq
->entries
;
3159 IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n",
3160 packet
->index
, tbd
->host_addr
, tbd
->buf_length
);
3161 #ifdef CONFIG_IPW2100_DEBUG
3162 if (packet
->info
.d_struct
.txb
->nr_frags
> 1)
3163 IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
3164 packet
->info
.d_struct
.txb
->nr_frags
);
3167 for (i
= 0; i
< packet
->info
.d_struct
.txb
->nr_frags
; i
++) {
3168 tbd
= &txq
->drv
[txq
->next
];
3169 if (i
== packet
->info
.d_struct
.txb
->nr_frags
- 1)
3170 tbd
->status
.info
.field
=
3171 IPW_BD_STATUS_TX_FRAME_802_3
|
3172 IPW_BD_STATUS_TX_INTERRUPT_ENABLE
;
3174 tbd
->status
.info
.field
=
3175 IPW_BD_STATUS_TX_FRAME_802_3
|
3176 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT
;
3178 tbd
->buf_length
= packet
->info
.d_struct
.txb
->
3179 fragments
[i
]->len
- LIBIPW_3ADDR_LEN
;
3181 tbd
->host_addr
= pci_map_single(priv
->pci_dev
,
3182 packet
->info
.d_struct
.
3188 if (pci_dma_mapping_error(priv
->pci_dev
,
3190 IPW_DEBUG_TX("dma mapping error\n");
3194 IPW_DEBUG_TX("data frag tbd TX%d P=%08x L=%d\n",
3195 txq
->next
, tbd
->host_addr
,
3198 pci_dma_sync_single_for_device(priv
->pci_dev
,
3204 txq
->next
%= txq
->entries
;
3207 txq
->available
-= 1 + packet
->info
.d_struct
.txb
->nr_frags
;
3208 SET_STAT(&priv
->txq_stat
, txq
->available
);
3210 list_add_tail(element
, &priv
->fw_pend_list
);
3211 INC_STAT(&priv
->fw_pend_stat
);
3214 if (txq
->next
!= next
) {
3215 /* kick off the DMA by notifying firmware the
3216 * write index has moved; make sure TBD stores are sync'd */
3217 write_register(priv
->net_dev
,
3218 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
3223 static void ipw2100_irq_tasklet(struct ipw2100_priv
*priv
)
3225 struct net_device
*dev
= priv
->net_dev
;
3226 unsigned long flags
;
3229 spin_lock_irqsave(&priv
->low_lock
, flags
);
3230 ipw2100_disable_interrupts(priv
);
3232 read_register(dev
, IPW_REG_INTA
, &inta
);
3234 IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
3235 (unsigned long)inta
& IPW_INTERRUPT_MASK
);
3240 /* We do not loop and keep polling for more interrupts as this
3241 * is frowned upon and doesn't play nicely with other potentially
3243 IPW_DEBUG_ISR("INTA: 0x%08lX\n",
3244 (unsigned long)inta
& IPW_INTERRUPT_MASK
);
3246 if (inta
& IPW2100_INTA_FATAL_ERROR
) {
3247 printk(KERN_WARNING DRV_NAME
3248 ": Fatal interrupt. Scheduling firmware restart.\n");
3250 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_FATAL_ERROR
);
3252 read_nic_dword(dev
, IPW_NIC_FATAL_ERROR
, &priv
->fatal_error
);
3253 IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
3254 priv
->net_dev
->name
, priv
->fatal_error
);
3256 read_nic_dword(dev
, IPW_ERROR_ADDR(priv
->fatal_error
), &tmp
);
3257 IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
3258 priv
->net_dev
->name
, tmp
);
3260 /* Wake up any sleeping jobs */
3261 schedule_reset(priv
);
3264 if (inta
& IPW2100_INTA_PARITY_ERROR
) {
3265 printk(KERN_ERR DRV_NAME
3266 ": ***** PARITY ERROR INTERRUPT !!!!\n");
3268 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_PARITY_ERROR
);
3271 if (inta
& IPW2100_INTA_RX_TRANSFER
) {
3272 IPW_DEBUG_ISR("RX interrupt\n");
3274 priv
->rx_interrupts
++;
3276 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_RX_TRANSFER
);
3278 __ipw2100_rx_process(priv
);
3279 __ipw2100_tx_complete(priv
);
3282 if (inta
& IPW2100_INTA_TX_TRANSFER
) {
3283 IPW_DEBUG_ISR("TX interrupt\n");
3285 priv
->tx_interrupts
++;
3287 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_TX_TRANSFER
);
3289 __ipw2100_tx_complete(priv
);
3290 ipw2100_tx_send_commands(priv
);
3291 ipw2100_tx_send_data(priv
);
3294 if (inta
& IPW2100_INTA_TX_COMPLETE
) {
3295 IPW_DEBUG_ISR("TX complete\n");
3297 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_TX_COMPLETE
);
3299 __ipw2100_tx_complete(priv
);
3302 if (inta
& IPW2100_INTA_EVENT_INTERRUPT
) {
3303 /* ipw2100_handle_event(dev); */
3305 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_EVENT_INTERRUPT
);
3308 if (inta
& IPW2100_INTA_FW_INIT_DONE
) {
3309 IPW_DEBUG_ISR("FW init done interrupt\n");
3312 read_register(dev
, IPW_REG_INTA
, &tmp
);
3313 if (tmp
& (IPW2100_INTA_FATAL_ERROR
|
3314 IPW2100_INTA_PARITY_ERROR
)) {
3315 write_register(dev
, IPW_REG_INTA
,
3316 IPW2100_INTA_FATAL_ERROR
|
3317 IPW2100_INTA_PARITY_ERROR
);
3320 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_FW_INIT_DONE
);
3323 if (inta
& IPW2100_INTA_STATUS_CHANGE
) {
3324 IPW_DEBUG_ISR("Status change interrupt\n");
3326 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_STATUS_CHANGE
);
3329 if (inta
& IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE
) {
3330 IPW_DEBUG_ISR("slave host mode interrupt\n");
3332 write_register(dev
, IPW_REG_INTA
,
3333 IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE
);
3337 ipw2100_enable_interrupts(priv
);
3339 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3341 IPW_DEBUG_ISR("exit\n");
3344 static irqreturn_t
ipw2100_interrupt(int irq
, void *data
)
3346 struct ipw2100_priv
*priv
= data
;
3347 u32 inta
, inta_mask
;
3352 spin_lock(&priv
->low_lock
);
3354 /* We check to see if we should be ignoring interrupts before
3355 * we touch the hardware. During ucode load if we try and handle
3356 * an interrupt we can cause keyboard problems as well as cause
3357 * the ucode to fail to initialize */
3358 if (!(priv
->status
& STATUS_INT_ENABLED
)) {
3363 read_register(priv
->net_dev
, IPW_REG_INTA_MASK
, &inta_mask
);
3364 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
3366 if (inta
== 0xFFFFFFFF) {
3367 /* Hardware disappeared */
3368 printk(KERN_WARNING DRV_NAME
": IRQ INTA == 0xFFFFFFFF\n");
3372 inta
&= IPW_INTERRUPT_MASK
;
3374 if (!(inta
& inta_mask
)) {
3375 /* Shared interrupt */
3379 /* We disable the hardware interrupt here just to prevent unneeded
3380 * calls to be made. We disable this again within the actual
3381 * work tasklet, so if another part of the code re-enables the
3382 * interrupt, that is fine */
3383 ipw2100_disable_interrupts(priv
);
3385 tasklet_schedule(&priv
->irq_tasklet
);
3386 spin_unlock(&priv
->low_lock
);
3390 spin_unlock(&priv
->low_lock
);
3394 static netdev_tx_t
ipw2100_tx(struct libipw_txb
*txb
,
3395 struct net_device
*dev
, int pri
)
3397 struct ipw2100_priv
*priv
= libipw_priv(dev
);
3398 struct list_head
*element
;
3399 struct ipw2100_tx_packet
*packet
;
3400 unsigned long flags
;
3402 spin_lock_irqsave(&priv
->low_lock
, flags
);
3404 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
3405 IPW_DEBUG_INFO("Can not transmit when not connected.\n");
3406 priv
->net_dev
->stats
.tx_carrier_errors
++;
3407 netif_stop_queue(dev
);
3411 if (list_empty(&priv
->tx_free_list
))
3414 element
= priv
->tx_free_list
.next
;
3415 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3417 packet
->info
.d_struct
.txb
= txb
;
3419 IPW_DEBUG_TX("Sending fragment (%d bytes):\n", txb
->fragments
[0]->len
);
3420 printk_buf(IPW_DL_TX
, txb
->fragments
[0]->data
, txb
->fragments
[0]->len
);
3422 packet
->jiffy_start
= jiffies
;
3425 DEC_STAT(&priv
->tx_free_stat
);
3427 list_add_tail(element
, &priv
->tx_pend_list
);
3428 INC_STAT(&priv
->tx_pend_stat
);
3430 ipw2100_tx_send_data(priv
);
3432 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3433 return NETDEV_TX_OK
;
3436 netif_stop_queue(dev
);
3437 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3438 return NETDEV_TX_BUSY
;
3441 static int ipw2100_msg_allocate(struct ipw2100_priv
*priv
)
3443 int i
, j
, err
= -EINVAL
;
3448 kmalloc(IPW_COMMAND_POOL_SIZE
* sizeof(struct ipw2100_tx_packet
),
3450 if (!priv
->msg_buffers
)
3453 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++) {
3454 v
= pci_zalloc_consistent(priv
->pci_dev
,
3455 sizeof(struct ipw2100_cmd_header
),
3458 printk(KERN_ERR DRV_NAME
": "
3459 "%s: PCI alloc failed for msg "
3460 "buffers.\n", priv
->net_dev
->name
);
3465 priv
->msg_buffers
[i
].type
= COMMAND
;
3466 priv
->msg_buffers
[i
].info
.c_struct
.cmd
=
3467 (struct ipw2100_cmd_header
*)v
;
3468 priv
->msg_buffers
[i
].info
.c_struct
.cmd_phys
= p
;
3471 if (i
== IPW_COMMAND_POOL_SIZE
)
3474 for (j
= 0; j
< i
; j
++) {
3475 pci_free_consistent(priv
->pci_dev
,
3476 sizeof(struct ipw2100_cmd_header
),
3477 priv
->msg_buffers
[j
].info
.c_struct
.cmd
,
3478 priv
->msg_buffers
[j
].info
.c_struct
.
3482 kfree(priv
->msg_buffers
);
3483 priv
->msg_buffers
= NULL
;
3488 static int ipw2100_msg_initialize(struct ipw2100_priv
*priv
)
3492 INIT_LIST_HEAD(&priv
->msg_free_list
);
3493 INIT_LIST_HEAD(&priv
->msg_pend_list
);
3495 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++)
3496 list_add_tail(&priv
->msg_buffers
[i
].list
, &priv
->msg_free_list
);
3497 SET_STAT(&priv
->msg_free_stat
, i
);
3502 static void ipw2100_msg_free(struct ipw2100_priv
*priv
)
3506 if (!priv
->msg_buffers
)
3509 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++) {
3510 pci_free_consistent(priv
->pci_dev
,
3511 sizeof(struct ipw2100_cmd_header
),
3512 priv
->msg_buffers
[i
].info
.c_struct
.cmd
,
3513 priv
->msg_buffers
[i
].info
.c_struct
.
3517 kfree(priv
->msg_buffers
);
3518 priv
->msg_buffers
= NULL
;
3521 static ssize_t
show_pci(struct device
*d
, struct device_attribute
*attr
,
3524 struct pci_dev
*pci_dev
= to_pci_dev(d
);
3529 for (i
= 0; i
< 16; i
++) {
3530 out
+= sprintf(out
, "[%08X] ", i
* 16);
3531 for (j
= 0; j
< 16; j
+= 4) {
3532 pci_read_config_dword(pci_dev
, i
* 16 + j
, &val
);
3533 out
+= sprintf(out
, "%08X ", val
);
3535 out
+= sprintf(out
, "\n");
3541 static DEVICE_ATTR(pci
, 0444, show_pci
, NULL
);
3543 static ssize_t
show_cfg(struct device
*d
, struct device_attribute
*attr
,
3546 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3547 return sprintf(buf
, "0x%08x\n", (int)p
->config
);
3550 static DEVICE_ATTR(cfg
, 0444, show_cfg
, NULL
);
3552 static ssize_t
show_status(struct device
*d
, struct device_attribute
*attr
,
3555 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3556 return sprintf(buf
, "0x%08x\n", (int)p
->status
);
3559 static DEVICE_ATTR(status
, 0444, show_status
, NULL
);
3561 static ssize_t
show_capability(struct device
*d
, struct device_attribute
*attr
,
3564 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3565 return sprintf(buf
, "0x%08x\n", (int)p
->capability
);
3568 static DEVICE_ATTR(capability
, 0444, show_capability
, NULL
);
3570 #define IPW2100_REG(x) { IPW_ ##x, #x }
3571 static const struct {
3575 IPW2100_REG(REG_GP_CNTRL
),
3576 IPW2100_REG(REG_GPIO
),
3577 IPW2100_REG(REG_INTA
),
3578 IPW2100_REG(REG_INTA_MASK
), IPW2100_REG(REG_RESET_REG
),};
3579 #define IPW2100_NIC(x, s) { x, #x, s }
3580 static const struct {
3585 IPW2100_NIC(IPW2100_CONTROL_REG
, 2),
3586 IPW2100_NIC(0x210014, 1), IPW2100_NIC(0x210000, 1),};
3587 #define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
3588 static const struct {
3593 IPW2100_ORD(STAT_TX_HOST_REQUESTS
, "requested Host Tx's (MSDU)"),
3594 IPW2100_ORD(STAT_TX_HOST_COMPLETE
,
3595 "successful Host Tx's (MSDU)"),
3596 IPW2100_ORD(STAT_TX_DIR_DATA
,
3597 "successful Directed Tx's (MSDU)"),
3598 IPW2100_ORD(STAT_TX_DIR_DATA1
,
3599 "successful Directed Tx's (MSDU) @ 1MB"),
3600 IPW2100_ORD(STAT_TX_DIR_DATA2
,
3601 "successful Directed Tx's (MSDU) @ 2MB"),
3602 IPW2100_ORD(STAT_TX_DIR_DATA5_5
,
3603 "successful Directed Tx's (MSDU) @ 5_5MB"),
3604 IPW2100_ORD(STAT_TX_DIR_DATA11
,
3605 "successful Directed Tx's (MSDU) @ 11MB"),
3606 IPW2100_ORD(STAT_TX_NODIR_DATA1
,
3607 "successful Non_Directed Tx's (MSDU) @ 1MB"),
3608 IPW2100_ORD(STAT_TX_NODIR_DATA2
,
3609 "successful Non_Directed Tx's (MSDU) @ 2MB"),
3610 IPW2100_ORD(STAT_TX_NODIR_DATA5_5
,
3611 "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
3612 IPW2100_ORD(STAT_TX_NODIR_DATA11
,
3613 "successful Non_Directed Tx's (MSDU) @ 11MB"),
3614 IPW2100_ORD(STAT_NULL_DATA
, "successful NULL data Tx's"),
3615 IPW2100_ORD(STAT_TX_RTS
, "successful Tx RTS"),
3616 IPW2100_ORD(STAT_TX_CTS
, "successful Tx CTS"),
3617 IPW2100_ORD(STAT_TX_ACK
, "successful Tx ACK"),
3618 IPW2100_ORD(STAT_TX_ASSN
, "successful Association Tx's"),
3619 IPW2100_ORD(STAT_TX_ASSN_RESP
,
3620 "successful Association response Tx's"),
3621 IPW2100_ORD(STAT_TX_REASSN
,
3622 "successful Reassociation Tx's"),
3623 IPW2100_ORD(STAT_TX_REASSN_RESP
,
3624 "successful Reassociation response Tx's"),
3625 IPW2100_ORD(STAT_TX_PROBE
,
3626 "probes successfully transmitted"),
3627 IPW2100_ORD(STAT_TX_PROBE_RESP
,
3628 "probe responses successfully transmitted"),
3629 IPW2100_ORD(STAT_TX_BEACON
, "tx beacon"),
3630 IPW2100_ORD(STAT_TX_ATIM
, "Tx ATIM"),
3631 IPW2100_ORD(STAT_TX_DISASSN
,
3632 "successful Disassociation TX"),
3633 IPW2100_ORD(STAT_TX_AUTH
, "successful Authentication Tx"),
3634 IPW2100_ORD(STAT_TX_DEAUTH
,
3635 "successful Deauthentication TX"),
3636 IPW2100_ORD(STAT_TX_TOTAL_BYTES
,
3637 "Total successful Tx data bytes"),
3638 IPW2100_ORD(STAT_TX_RETRIES
, "Tx retries"),
3639 IPW2100_ORD(STAT_TX_RETRY1
, "Tx retries at 1MBPS"),
3640 IPW2100_ORD(STAT_TX_RETRY2
, "Tx retries at 2MBPS"),
3641 IPW2100_ORD(STAT_TX_RETRY5_5
, "Tx retries at 5.5MBPS"),
3642 IPW2100_ORD(STAT_TX_RETRY11
, "Tx retries at 11MBPS"),
3643 IPW2100_ORD(STAT_TX_FAILURES
, "Tx Failures"),
3644 IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP
,
3645 "times max tries in a hop failed"),
3646 IPW2100_ORD(STAT_TX_DISASSN_FAIL
,
3647 "times disassociation failed"),
3648 IPW2100_ORD(STAT_TX_ERR_CTS
, "missed/bad CTS frames"),
3649 IPW2100_ORD(STAT_TX_ERR_ACK
, "tx err due to acks"),
3650 IPW2100_ORD(STAT_RX_HOST
, "packets passed to host"),
3651 IPW2100_ORD(STAT_RX_DIR_DATA
, "directed packets"),
3652 IPW2100_ORD(STAT_RX_DIR_DATA1
, "directed packets at 1MB"),
3653 IPW2100_ORD(STAT_RX_DIR_DATA2
, "directed packets at 2MB"),
3654 IPW2100_ORD(STAT_RX_DIR_DATA5_5
,
3655 "directed packets at 5.5MB"),
3656 IPW2100_ORD(STAT_RX_DIR_DATA11
, "directed packets at 11MB"),
3657 IPW2100_ORD(STAT_RX_NODIR_DATA
, "nondirected packets"),
3658 IPW2100_ORD(STAT_RX_NODIR_DATA1
,
3659 "nondirected packets at 1MB"),
3660 IPW2100_ORD(STAT_RX_NODIR_DATA2
,
3661 "nondirected packets at 2MB"),
3662 IPW2100_ORD(STAT_RX_NODIR_DATA5_5
,
3663 "nondirected packets at 5.5MB"),
3664 IPW2100_ORD(STAT_RX_NODIR_DATA11
,
3665 "nondirected packets at 11MB"),
3666 IPW2100_ORD(STAT_RX_NULL_DATA
, "null data rx's"),
3667 IPW2100_ORD(STAT_RX_RTS
, "Rx RTS"), IPW2100_ORD(STAT_RX_CTS
,
3669 IPW2100_ORD(STAT_RX_ACK
, "Rx ACK"),
3670 IPW2100_ORD(STAT_RX_CFEND
, "Rx CF End"),
3671 IPW2100_ORD(STAT_RX_CFEND_ACK
, "Rx CF End + CF Ack"),
3672 IPW2100_ORD(STAT_RX_ASSN
, "Association Rx's"),
3673 IPW2100_ORD(STAT_RX_ASSN_RESP
, "Association response Rx's"),
3674 IPW2100_ORD(STAT_RX_REASSN
, "Reassociation Rx's"),
3675 IPW2100_ORD(STAT_RX_REASSN_RESP
,
3676 "Reassociation response Rx's"),
3677 IPW2100_ORD(STAT_RX_PROBE
, "probe Rx's"),
3678 IPW2100_ORD(STAT_RX_PROBE_RESP
, "probe response Rx's"),
3679 IPW2100_ORD(STAT_RX_BEACON
, "Rx beacon"),
3680 IPW2100_ORD(STAT_RX_ATIM
, "Rx ATIM"),
3681 IPW2100_ORD(STAT_RX_DISASSN
, "disassociation Rx"),
3682 IPW2100_ORD(STAT_RX_AUTH
, "authentication Rx"),
3683 IPW2100_ORD(STAT_RX_DEAUTH
, "deauthentication Rx"),
3684 IPW2100_ORD(STAT_RX_TOTAL_BYTES
,
3685 "Total rx data bytes received"),
3686 IPW2100_ORD(STAT_RX_ERR_CRC
, "packets with Rx CRC error"),
3687 IPW2100_ORD(STAT_RX_ERR_CRC1
, "Rx CRC errors at 1MB"),
3688 IPW2100_ORD(STAT_RX_ERR_CRC2
, "Rx CRC errors at 2MB"),
3689 IPW2100_ORD(STAT_RX_ERR_CRC5_5
, "Rx CRC errors at 5.5MB"),
3690 IPW2100_ORD(STAT_RX_ERR_CRC11
, "Rx CRC errors at 11MB"),
3691 IPW2100_ORD(STAT_RX_DUPLICATE1
,
3692 "duplicate rx packets at 1MB"),
3693 IPW2100_ORD(STAT_RX_DUPLICATE2
,
3694 "duplicate rx packets at 2MB"),
3695 IPW2100_ORD(STAT_RX_DUPLICATE5_5
,
3696 "duplicate rx packets at 5.5MB"),
3697 IPW2100_ORD(STAT_RX_DUPLICATE11
,
3698 "duplicate rx packets at 11MB"),
3699 IPW2100_ORD(STAT_RX_DUPLICATE
, "duplicate rx packets"),
3700 IPW2100_ORD(PERS_DB_LOCK
, "locking fw permanent db"),
3701 IPW2100_ORD(PERS_DB_SIZE
, "size of fw permanent db"),
3702 IPW2100_ORD(PERS_DB_ADDR
, "address of fw permanent db"),
3703 IPW2100_ORD(STAT_RX_INVALID_PROTOCOL
,
3704 "rx frames with invalid protocol"),
3705 IPW2100_ORD(SYS_BOOT_TIME
, "Boot time"),
3706 IPW2100_ORD(STAT_RX_NO_BUFFER
,
3707 "rx frames rejected due to no buffer"),
3708 IPW2100_ORD(STAT_RX_MISSING_FRAG
,
3709 "rx frames dropped due to missing fragment"),
3710 IPW2100_ORD(STAT_RX_ORPHAN_FRAG
,
3711 "rx frames dropped due to non-sequential fragment"),
3712 IPW2100_ORD(STAT_RX_ORPHAN_FRAME
,
3713 "rx frames dropped due to unmatched 1st frame"),
3714 IPW2100_ORD(STAT_RX_FRAG_AGEOUT
,
3715 "rx frames dropped due to uncompleted frame"),
3716 IPW2100_ORD(STAT_RX_ICV_ERRORS
,
3717 "ICV errors during decryption"),
3718 IPW2100_ORD(STAT_PSP_SUSPENSION
, "times adapter suspended"),
3719 IPW2100_ORD(STAT_PSP_BCN_TIMEOUT
, "beacon timeout"),
3720 IPW2100_ORD(STAT_PSP_POLL_TIMEOUT
,
3721 "poll response timeouts"),
3722 IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT
,
3723 "timeouts waiting for last {broad,multi}cast pkt"),
3724 IPW2100_ORD(STAT_PSP_RX_DTIMS
, "PSP DTIMs received"),
3725 IPW2100_ORD(STAT_PSP_RX_TIMS
, "PSP TIMs received"),
3726 IPW2100_ORD(STAT_PSP_STATION_ID
, "PSP Station ID"),
3727 IPW2100_ORD(LAST_ASSN_TIME
, "RTC time of last association"),
3728 IPW2100_ORD(STAT_PERCENT_MISSED_BCNS
,
3729 "current calculation of % missed beacons"),
3730 IPW2100_ORD(STAT_PERCENT_RETRIES
,
3731 "current calculation of % missed tx retries"),
3732 IPW2100_ORD(ASSOCIATED_AP_PTR
,
3733 "0 if not associated, else pointer to AP table entry"),
3734 IPW2100_ORD(AVAILABLE_AP_CNT
,
3735 "AP's decsribed in the AP table"),
3736 IPW2100_ORD(AP_LIST_PTR
, "Ptr to list of available APs"),
3737 IPW2100_ORD(STAT_AP_ASSNS
, "associations"),
3738 IPW2100_ORD(STAT_ASSN_FAIL
, "association failures"),
3739 IPW2100_ORD(STAT_ASSN_RESP_FAIL
,
3740 "failures due to response fail"),
3741 IPW2100_ORD(STAT_FULL_SCANS
, "full scans"),
3742 IPW2100_ORD(CARD_DISABLED
, "Card Disabled"),
3743 IPW2100_ORD(STAT_ROAM_INHIBIT
,
3744 "times roaming was inhibited due to activity"),
3745 IPW2100_ORD(RSSI_AT_ASSN
,
3746 "RSSI of associated AP at time of association"),
3747 IPW2100_ORD(STAT_ASSN_CAUSE1
,
3748 "reassociation: no probe response or TX on hop"),
3749 IPW2100_ORD(STAT_ASSN_CAUSE2
,
3750 "reassociation: poor tx/rx quality"),
3751 IPW2100_ORD(STAT_ASSN_CAUSE3
,
3752 "reassociation: tx/rx quality (excessive AP load"),
3753 IPW2100_ORD(STAT_ASSN_CAUSE4
,
3754 "reassociation: AP RSSI level"),
3755 IPW2100_ORD(STAT_ASSN_CAUSE5
,
3756 "reassociations due to load leveling"),
3757 IPW2100_ORD(STAT_AUTH_FAIL
, "times authentication failed"),
3758 IPW2100_ORD(STAT_AUTH_RESP_FAIL
,
3759 "times authentication response failed"),
3760 IPW2100_ORD(STATION_TABLE_CNT
,
3761 "entries in association table"),
3762 IPW2100_ORD(RSSI_AVG_CURR
, "Current avg RSSI"),
3763 IPW2100_ORD(POWER_MGMT_MODE
, "Power mode - 0=CAM, 1=PSP"),
3764 IPW2100_ORD(COUNTRY_CODE
,
3765 "IEEE country code as recv'd from beacon"),
3766 IPW2100_ORD(COUNTRY_CHANNELS
,
3767 "channels supported by country"),
3768 IPW2100_ORD(RESET_CNT
, "adapter resets (warm)"),
3769 IPW2100_ORD(BEACON_INTERVAL
, "Beacon interval"),
3770 IPW2100_ORD(ANTENNA_DIVERSITY
,
3771 "TRUE if antenna diversity is disabled"),
3772 IPW2100_ORD(DTIM_PERIOD
, "beacon intervals between DTIMs"),
3773 IPW2100_ORD(OUR_FREQ
,
3774 "current radio freq lower digits - channel ID"),
3775 IPW2100_ORD(RTC_TIME
, "current RTC time"),
3776 IPW2100_ORD(PORT_TYPE
, "operating mode"),
3777 IPW2100_ORD(CURRENT_TX_RATE
, "current tx rate"),
3778 IPW2100_ORD(SUPPORTED_RATES
, "supported tx rates"),
3779 IPW2100_ORD(ATIM_WINDOW
, "current ATIM Window"),
3780 IPW2100_ORD(BASIC_RATES
, "basic tx rates"),
3781 IPW2100_ORD(NIC_HIGHEST_RATE
, "NIC highest tx rate"),
3782 IPW2100_ORD(AP_HIGHEST_RATE
, "AP highest tx rate"),
3783 IPW2100_ORD(CAPABILITIES
,
3784 "Management frame capability field"),
3785 IPW2100_ORD(AUTH_TYPE
, "Type of authentication"),
3786 IPW2100_ORD(RADIO_TYPE
, "Adapter card platform type"),
3787 IPW2100_ORD(RTS_THRESHOLD
,
3788 "Min packet length for RTS handshaking"),
3789 IPW2100_ORD(INT_MODE
, "International mode"),
3790 IPW2100_ORD(FRAGMENTATION_THRESHOLD
,
3791 "protocol frag threshold"),
3792 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS
,
3793 "EEPROM offset in SRAM"),
3794 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE
,
3795 "EEPROM size in SRAM"),
3796 IPW2100_ORD(EEPROM_SKU_CAPABILITY
, "EEPROM SKU Capability"),
3797 IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS
,
3798 "EEPROM IBSS 11b channel set"),
3799 IPW2100_ORD(MAC_VERSION
, "MAC Version"),
3800 IPW2100_ORD(MAC_REVISION
, "MAC Revision"),
3801 IPW2100_ORD(RADIO_VERSION
, "Radio Version"),
3802 IPW2100_ORD(NIC_MANF_DATE_TIME
, "MANF Date/Time STAMP"),
3803 IPW2100_ORD(UCODE_VERSION
, "Ucode Version"),};
3805 static ssize_t
show_registers(struct device
*d
, struct device_attribute
*attr
,
3809 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3810 struct net_device
*dev
= priv
->net_dev
;
3814 out
+= sprintf(out
, "%30s [Address ] : Hex\n", "Register");
3816 for (i
= 0; i
< ARRAY_SIZE(hw_data
); i
++) {
3817 read_register(dev
, hw_data
[i
].addr
, &val
);
3818 out
+= sprintf(out
, "%30s [%08X] : %08X\n",
3819 hw_data
[i
].name
, hw_data
[i
].addr
, val
);
3825 static DEVICE_ATTR(registers
, 0444, show_registers
, NULL
);
3827 static ssize_t
show_hardware(struct device
*d
, struct device_attribute
*attr
,
3830 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3831 struct net_device
*dev
= priv
->net_dev
;
3835 out
+= sprintf(out
, "%30s [Address ] : Hex\n", "NIC entry");
3837 for (i
= 0; i
< ARRAY_SIZE(nic_data
); i
++) {
3842 switch (nic_data
[i
].size
) {
3844 read_nic_byte(dev
, nic_data
[i
].addr
, &tmp8
);
3845 out
+= sprintf(out
, "%30s [%08X] : %02X\n",
3846 nic_data
[i
].name
, nic_data
[i
].addr
,
3850 read_nic_word(dev
, nic_data
[i
].addr
, &tmp16
);
3851 out
+= sprintf(out
, "%30s [%08X] : %04X\n",
3852 nic_data
[i
].name
, nic_data
[i
].addr
,
3856 read_nic_dword(dev
, nic_data
[i
].addr
, &tmp32
);
3857 out
+= sprintf(out
, "%30s [%08X] : %08X\n",
3858 nic_data
[i
].name
, nic_data
[i
].addr
,
3866 static DEVICE_ATTR(hardware
, 0444, show_hardware
, NULL
);
3868 static ssize_t
show_memory(struct device
*d
, struct device_attribute
*attr
,
3871 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3872 struct net_device
*dev
= priv
->net_dev
;
3873 static unsigned long loop
= 0;
3879 if (loop
>= 0x30000)
3882 /* sysfs provides us PAGE_SIZE buffer */
3883 while (len
< PAGE_SIZE
- 128 && loop
< 0x30000) {
3885 if (priv
->snapshot
[0])
3886 for (i
= 0; i
< 4; i
++)
3888 *(u32
*) SNAPSHOT_ADDR(loop
+ i
* 4);
3890 for (i
= 0; i
< 4; i
++)
3891 read_nic_dword(dev
, loop
+ i
* 4, &buffer
[i
]);
3894 len
+= sprintf(buf
+ len
,
3899 ((u8
*) buffer
)[0x0],
3900 ((u8
*) buffer
)[0x1],
3901 ((u8
*) buffer
)[0x2],
3902 ((u8
*) buffer
)[0x3],
3903 ((u8
*) buffer
)[0x4],
3904 ((u8
*) buffer
)[0x5],
3905 ((u8
*) buffer
)[0x6],
3906 ((u8
*) buffer
)[0x7],
3907 ((u8
*) buffer
)[0x8],
3908 ((u8
*) buffer
)[0x9],
3909 ((u8
*) buffer
)[0xa],
3910 ((u8
*) buffer
)[0xb],
3911 ((u8
*) buffer
)[0xc],
3912 ((u8
*) buffer
)[0xd],
3913 ((u8
*) buffer
)[0xe],
3914 ((u8
*) buffer
)[0xf]);
3916 len
+= sprintf(buf
+ len
, "%s\n",
3917 snprint_line(line
, sizeof(line
),
3918 (u8
*) buffer
, 16, loop
));
3925 static ssize_t
store_memory(struct device
*d
, struct device_attribute
*attr
,
3926 const char *buf
, size_t count
)
3928 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3929 struct net_device
*dev
= priv
->net_dev
;
3930 const char *p
= buf
;
3932 (void)dev
; /* kill unused-var warning for debug-only code */
3938 (count
>= 2 && tolower(p
[0]) == 'o' && tolower(p
[1]) == 'n')) {
3939 IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
3943 } else if (p
[0] == '0' || (count
>= 2 && tolower(p
[0]) == 'o' &&
3944 tolower(p
[1]) == 'f')) {
3945 IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
3949 } else if (tolower(p
[0]) == 'r') {
3950 IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", dev
->name
);
3951 ipw2100_snapshot_free(priv
);
3954 IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
3955 "reset = clear memory snapshot\n", dev
->name
);
3960 static DEVICE_ATTR(memory
, 0644, show_memory
, store_memory
);
3962 static ssize_t
show_ordinals(struct device
*d
, struct device_attribute
*attr
,
3965 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3969 static int loop
= 0;
3971 if (priv
->status
& STATUS_RF_KILL_MASK
)
3974 if (loop
>= ARRAY_SIZE(ord_data
))
3977 /* sysfs provides us PAGE_SIZE buffer */
3978 while (len
< PAGE_SIZE
- 128 && loop
< ARRAY_SIZE(ord_data
)) {
3979 val_len
= sizeof(u32
);
3981 if (ipw2100_get_ordinal(priv
, ord_data
[loop
].index
, &val
,
3983 len
+= sprintf(buf
+ len
, "[0x%02X] = ERROR %s\n",
3984 ord_data
[loop
].index
,
3985 ord_data
[loop
].desc
);
3987 len
+= sprintf(buf
+ len
, "[0x%02X] = 0x%08X %s\n",
3988 ord_data
[loop
].index
, val
,
3989 ord_data
[loop
].desc
);
3996 static DEVICE_ATTR(ordinals
, 0444, show_ordinals
, NULL
);
3998 static ssize_t
show_stats(struct device
*d
, struct device_attribute
*attr
,
4001 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4004 out
+= sprintf(out
, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
4005 priv
->interrupts
, priv
->tx_interrupts
,
4006 priv
->rx_interrupts
, priv
->inta_other
);
4007 out
+= sprintf(out
, "firmware resets: %d\n", priv
->resets
);
4008 out
+= sprintf(out
, "firmware hangs: %d\n", priv
->hangs
);
4009 #ifdef CONFIG_IPW2100_DEBUG
4010 out
+= sprintf(out
, "packet mismatch image: %s\n",
4011 priv
->snapshot
[0] ? "YES" : "NO");
4017 static DEVICE_ATTR(stats
, 0444, show_stats
, NULL
);
4019 static int ipw2100_switch_mode(struct ipw2100_priv
*priv
, u32 mode
)
4023 if (mode
== priv
->ieee
->iw_mode
)
4026 err
= ipw2100_disable_adapter(priv
);
4028 printk(KERN_ERR DRV_NAME
": %s: Could not disable adapter %d\n",
4029 priv
->net_dev
->name
, err
);
4035 priv
->net_dev
->type
= ARPHRD_ETHER
;
4038 priv
->net_dev
->type
= ARPHRD_ETHER
;
4040 #ifdef CONFIG_IPW2100_MONITOR
4041 case IW_MODE_MONITOR
:
4042 priv
->last_mode
= priv
->ieee
->iw_mode
;
4043 priv
->net_dev
->type
= ARPHRD_IEEE80211_RADIOTAP
;
4045 #endif /* CONFIG_IPW2100_MONITOR */
4048 priv
->ieee
->iw_mode
= mode
;
4051 /* Indicate ipw2100_download_firmware download firmware
4052 * from disk instead of memory. */
4053 ipw2100_firmware
.version
= 0;
4056 printk(KERN_INFO
"%s: Resetting on mode change.\n", priv
->net_dev
->name
);
4057 priv
->reset_backoff
= 0;
4058 schedule_reset(priv
);
4063 static ssize_t
show_internals(struct device
*d
, struct device_attribute
*attr
,
4066 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4069 #define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" y "\n", priv-> x)
4071 if (priv
->status
& STATUS_ASSOCIATED
)
4072 len
+= sprintf(buf
+ len
, "connected: %lu\n",
4073 get_seconds() - priv
->connect_start
);
4075 len
+= sprintf(buf
+ len
, "not connected\n");
4077 DUMP_VAR(ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
], "p");
4078 DUMP_VAR(status
, "08lx");
4079 DUMP_VAR(config
, "08lx");
4080 DUMP_VAR(capability
, "08lx");
4083 sprintf(buf
+ len
, "last_rtc: %lu\n",
4084 (unsigned long)priv
->last_rtc
);
4086 DUMP_VAR(fatal_error
, "d");
4087 DUMP_VAR(stop_hang_check
, "d");
4088 DUMP_VAR(stop_rf_kill
, "d");
4089 DUMP_VAR(messages_sent
, "d");
4091 DUMP_VAR(tx_pend_stat
.value
, "d");
4092 DUMP_VAR(tx_pend_stat
.hi
, "d");
4094 DUMP_VAR(tx_free_stat
.value
, "d");
4095 DUMP_VAR(tx_free_stat
.lo
, "d");
4097 DUMP_VAR(msg_free_stat
.value
, "d");
4098 DUMP_VAR(msg_free_stat
.lo
, "d");
4100 DUMP_VAR(msg_pend_stat
.value
, "d");
4101 DUMP_VAR(msg_pend_stat
.hi
, "d");
4103 DUMP_VAR(fw_pend_stat
.value
, "d");
4104 DUMP_VAR(fw_pend_stat
.hi
, "d");
4106 DUMP_VAR(txq_stat
.value
, "d");
4107 DUMP_VAR(txq_stat
.lo
, "d");
4109 DUMP_VAR(ieee
->scans
, "d");
4110 DUMP_VAR(reset_backoff
, "d");
4115 static DEVICE_ATTR(internals
, 0444, show_internals
, NULL
);
4117 static ssize_t
show_bssinfo(struct device
*d
, struct device_attribute
*attr
,
4120 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4121 char essid
[IW_ESSID_MAX_SIZE
+ 1];
4125 unsigned int length
;
4128 if (priv
->status
& STATUS_RF_KILL_MASK
)
4131 memset(essid
, 0, sizeof(essid
));
4132 memset(bssid
, 0, sizeof(bssid
));
4134 length
= IW_ESSID_MAX_SIZE
;
4135 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_SSID
, essid
, &length
);
4137 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4140 length
= sizeof(bssid
);
4141 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
,
4144 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4147 length
= sizeof(u32
);
4148 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_OUR_FREQ
, &chan
, &length
);
4150 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4153 out
+= sprintf(out
, "ESSID: %s\n", essid
);
4154 out
+= sprintf(out
, "BSSID: %pM\n", bssid
);
4155 out
+= sprintf(out
, "Channel: %d\n", chan
);
4160 static DEVICE_ATTR(bssinfo
, 0444, show_bssinfo
, NULL
);
4162 #ifdef CONFIG_IPW2100_DEBUG
4163 static ssize_t
debug_level_show(struct device_driver
*d
, char *buf
)
4165 return sprintf(buf
, "0x%08X\n", ipw2100_debug_level
);
4168 static ssize_t
debug_level_store(struct device_driver
*d
,
4169 const char *buf
, size_t count
)
4174 ret
= kstrtou32(buf
, 0, &val
);
4176 IPW_DEBUG_INFO(": %s is not in hex or decimal form.\n", buf
);
4178 ipw2100_debug_level
= val
;
4180 return strnlen(buf
, count
);
4182 static DRIVER_ATTR_RW(debug_level
);
4183 #endif /* CONFIG_IPW2100_DEBUG */
4185 static ssize_t
show_fatal_error(struct device
*d
,
4186 struct device_attribute
*attr
, char *buf
)
4188 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4192 if (priv
->fatal_error
)
4193 out
+= sprintf(out
, "0x%08X\n", priv
->fatal_error
);
4195 out
+= sprintf(out
, "0\n");
4197 for (i
= 1; i
<= IPW2100_ERROR_QUEUE
; i
++) {
4198 if (!priv
->fatal_errors
[(priv
->fatal_index
- i
) %
4199 IPW2100_ERROR_QUEUE
])
4202 out
+= sprintf(out
, "%d. 0x%08X\n", i
,
4203 priv
->fatal_errors
[(priv
->fatal_index
- i
) %
4204 IPW2100_ERROR_QUEUE
]);
4210 static ssize_t
store_fatal_error(struct device
*d
,
4211 struct device_attribute
*attr
, const char *buf
,
4214 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4215 schedule_reset(priv
);
4219 static DEVICE_ATTR(fatal_error
, 0644, show_fatal_error
, store_fatal_error
);
4221 static ssize_t
show_scan_age(struct device
*d
, struct device_attribute
*attr
,
4224 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4225 return sprintf(buf
, "%d\n", priv
->ieee
->scan_age
);
4228 static ssize_t
store_scan_age(struct device
*d
, struct device_attribute
*attr
,
4229 const char *buf
, size_t count
)
4231 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4232 struct net_device
*dev
= priv
->net_dev
;
4236 (void)dev
; /* kill unused-var warning for debug-only code */
4238 IPW_DEBUG_INFO("enter\n");
4240 ret
= kstrtoul(buf
, 0, &val
);
4242 IPW_DEBUG_INFO("%s: user supplied invalid value.\n", dev
->name
);
4244 priv
->ieee
->scan_age
= val
;
4245 IPW_DEBUG_INFO("set scan_age = %u\n", priv
->ieee
->scan_age
);
4248 IPW_DEBUG_INFO("exit\n");
4249 return strnlen(buf
, count
);
4252 static DEVICE_ATTR(scan_age
, 0644, show_scan_age
, store_scan_age
);
4254 static ssize_t
show_rf_kill(struct device
*d
, struct device_attribute
*attr
,
4257 /* 0 - RF kill not enabled
4258 1 - SW based RF kill active (sysfs)
4259 2 - HW based RF kill active
4260 3 - Both HW and SW baed RF kill active */
4261 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4262 int val
= ((priv
->status
& STATUS_RF_KILL_SW
) ? 0x1 : 0x0) |
4263 (rf_kill_active(priv
) ? 0x2 : 0x0);
4264 return sprintf(buf
, "%i\n", val
);
4267 static int ipw_radio_kill_sw(struct ipw2100_priv
*priv
, int disable_radio
)
4269 if ((disable_radio
? 1 : 0) ==
4270 (priv
->status
& STATUS_RF_KILL_SW
? 1 : 0))
4273 IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
4274 disable_radio
? "OFF" : "ON");
4276 mutex_lock(&priv
->action_mutex
);
4278 if (disable_radio
) {
4279 priv
->status
|= STATUS_RF_KILL_SW
;
4282 priv
->status
&= ~STATUS_RF_KILL_SW
;
4283 if (rf_kill_active(priv
)) {
4284 IPW_DEBUG_RF_KILL("Can not turn radio back on - "
4285 "disabled by HW switch\n");
4286 /* Make sure the RF_KILL check timer is running */
4287 priv
->stop_rf_kill
= 0;
4288 mod_delayed_work(system_wq
, &priv
->rf_kill
,
4289 round_jiffies_relative(HZ
));
4291 schedule_reset(priv
);
4294 mutex_unlock(&priv
->action_mutex
);
4298 static ssize_t
store_rf_kill(struct device
*d
, struct device_attribute
*attr
,
4299 const char *buf
, size_t count
)
4301 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4302 ipw_radio_kill_sw(priv
, buf
[0] == '1');
4306 static DEVICE_ATTR(rf_kill
, 0644, show_rf_kill
, store_rf_kill
);
4308 static struct attribute
*ipw2100_sysfs_entries
[] = {
4309 &dev_attr_hardware
.attr
,
4310 &dev_attr_registers
.attr
,
4311 &dev_attr_ordinals
.attr
,
4313 &dev_attr_stats
.attr
,
4314 &dev_attr_internals
.attr
,
4315 &dev_attr_bssinfo
.attr
,
4316 &dev_attr_memory
.attr
,
4317 &dev_attr_scan_age
.attr
,
4318 &dev_attr_fatal_error
.attr
,
4319 &dev_attr_rf_kill
.attr
,
4321 &dev_attr_status
.attr
,
4322 &dev_attr_capability
.attr
,
4326 static const struct attribute_group ipw2100_attribute_group
= {
4327 .attrs
= ipw2100_sysfs_entries
,
4330 static int status_queue_allocate(struct ipw2100_priv
*priv
, int entries
)
4332 struct ipw2100_status_queue
*q
= &priv
->status_queue
;
4334 IPW_DEBUG_INFO("enter\n");
4336 q
->size
= entries
* sizeof(struct ipw2100_status
);
4337 q
->drv
= pci_zalloc_consistent(priv
->pci_dev
, q
->size
, &q
->nic
);
4339 IPW_DEBUG_WARNING("Can not allocate status queue.\n");
4343 IPW_DEBUG_INFO("exit\n");
4348 static void status_queue_free(struct ipw2100_priv
*priv
)
4350 IPW_DEBUG_INFO("enter\n");
4352 if (priv
->status_queue
.drv
) {
4353 pci_free_consistent(priv
->pci_dev
, priv
->status_queue
.size
,
4354 priv
->status_queue
.drv
,
4355 priv
->status_queue
.nic
);
4356 priv
->status_queue
.drv
= NULL
;
4359 IPW_DEBUG_INFO("exit\n");
4362 static int bd_queue_allocate(struct ipw2100_priv
*priv
,
4363 struct ipw2100_bd_queue
*q
, int entries
)
4365 IPW_DEBUG_INFO("enter\n");
4367 memset(q
, 0, sizeof(struct ipw2100_bd_queue
));
4369 q
->entries
= entries
;
4370 q
->size
= entries
* sizeof(struct ipw2100_bd
);
4371 q
->drv
= pci_zalloc_consistent(priv
->pci_dev
, q
->size
, &q
->nic
);
4374 ("can't allocate shared memory for buffer descriptors\n");
4378 IPW_DEBUG_INFO("exit\n");
4383 static void bd_queue_free(struct ipw2100_priv
*priv
, struct ipw2100_bd_queue
*q
)
4385 IPW_DEBUG_INFO("enter\n");
4391 pci_free_consistent(priv
->pci_dev
, q
->size
, q
->drv
, q
->nic
);
4395 IPW_DEBUG_INFO("exit\n");
4398 static void bd_queue_initialize(struct ipw2100_priv
*priv
,
4399 struct ipw2100_bd_queue
*q
, u32 base
, u32 size
,
4402 IPW_DEBUG_INFO("enter\n");
4404 IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q
->drv
,
4407 write_register(priv
->net_dev
, base
, q
->nic
);
4408 write_register(priv
->net_dev
, size
, q
->entries
);
4409 write_register(priv
->net_dev
, r
, q
->oldest
);
4410 write_register(priv
->net_dev
, w
, q
->next
);
4412 IPW_DEBUG_INFO("exit\n");
4415 static void ipw2100_kill_works(struct ipw2100_priv
*priv
)
4417 priv
->stop_rf_kill
= 1;
4418 priv
->stop_hang_check
= 1;
4419 cancel_delayed_work_sync(&priv
->reset_work
);
4420 cancel_delayed_work_sync(&priv
->security_work
);
4421 cancel_delayed_work_sync(&priv
->wx_event_work
);
4422 cancel_delayed_work_sync(&priv
->hang_check
);
4423 cancel_delayed_work_sync(&priv
->rf_kill
);
4424 cancel_delayed_work_sync(&priv
->scan_event
);
4427 static int ipw2100_tx_allocate(struct ipw2100_priv
*priv
)
4429 int i
, j
, err
= -EINVAL
;
4433 IPW_DEBUG_INFO("enter\n");
4435 err
= bd_queue_allocate(priv
, &priv
->tx_queue
, TX_QUEUE_LENGTH
);
4437 IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
4438 priv
->net_dev
->name
);
4442 priv
->tx_buffers
= kmalloc_array(TX_PENDED_QUEUE_LENGTH
,
4443 sizeof(struct ipw2100_tx_packet
),
4445 if (!priv
->tx_buffers
) {
4446 bd_queue_free(priv
, &priv
->tx_queue
);
4450 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4451 v
= pci_alloc_consistent(priv
->pci_dev
,
4452 sizeof(struct ipw2100_data_header
),
4455 printk(KERN_ERR DRV_NAME
4456 ": %s: PCI alloc failed for tx " "buffers.\n",
4457 priv
->net_dev
->name
);
4462 priv
->tx_buffers
[i
].type
= DATA
;
4463 priv
->tx_buffers
[i
].info
.d_struct
.data
=
4464 (struct ipw2100_data_header
*)v
;
4465 priv
->tx_buffers
[i
].info
.d_struct
.data_phys
= p
;
4466 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4469 if (i
== TX_PENDED_QUEUE_LENGTH
)
4472 for (j
= 0; j
< i
; j
++) {
4473 pci_free_consistent(priv
->pci_dev
,
4474 sizeof(struct ipw2100_data_header
),
4475 priv
->tx_buffers
[j
].info
.d_struct
.data
,
4476 priv
->tx_buffers
[j
].info
.d_struct
.
4480 kfree(priv
->tx_buffers
);
4481 priv
->tx_buffers
= NULL
;
4486 static void ipw2100_tx_initialize(struct ipw2100_priv
*priv
)
4490 IPW_DEBUG_INFO("enter\n");
4493 * reinitialize packet info lists
4495 INIT_LIST_HEAD(&priv
->fw_pend_list
);
4496 INIT_STAT(&priv
->fw_pend_stat
);
4499 * reinitialize lists
4501 INIT_LIST_HEAD(&priv
->tx_pend_list
);
4502 INIT_LIST_HEAD(&priv
->tx_free_list
);
4503 INIT_STAT(&priv
->tx_pend_stat
);
4504 INIT_STAT(&priv
->tx_free_stat
);
4506 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4507 /* We simply drop any SKBs that have been queued for
4509 if (priv
->tx_buffers
[i
].info
.d_struct
.txb
) {
4510 libipw_txb_free(priv
->tx_buffers
[i
].info
.d_struct
.
4512 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4515 list_add_tail(&priv
->tx_buffers
[i
].list
, &priv
->tx_free_list
);
4518 SET_STAT(&priv
->tx_free_stat
, i
);
4520 priv
->tx_queue
.oldest
= 0;
4521 priv
->tx_queue
.available
= priv
->tx_queue
.entries
;
4522 priv
->tx_queue
.next
= 0;
4523 INIT_STAT(&priv
->txq_stat
);
4524 SET_STAT(&priv
->txq_stat
, priv
->tx_queue
.available
);
4526 bd_queue_initialize(priv
, &priv
->tx_queue
,
4527 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE
,
4528 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE
,
4529 IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX
,
4530 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
);
4532 IPW_DEBUG_INFO("exit\n");
4536 static void ipw2100_tx_free(struct ipw2100_priv
*priv
)
4540 IPW_DEBUG_INFO("enter\n");
4542 bd_queue_free(priv
, &priv
->tx_queue
);
4544 if (!priv
->tx_buffers
)
4547 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4548 if (priv
->tx_buffers
[i
].info
.d_struct
.txb
) {
4549 libipw_txb_free(priv
->tx_buffers
[i
].info
.d_struct
.
4551 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4553 if (priv
->tx_buffers
[i
].info
.d_struct
.data
)
4554 pci_free_consistent(priv
->pci_dev
,
4555 sizeof(struct ipw2100_data_header
),
4556 priv
->tx_buffers
[i
].info
.d_struct
.
4558 priv
->tx_buffers
[i
].info
.d_struct
.
4562 kfree(priv
->tx_buffers
);
4563 priv
->tx_buffers
= NULL
;
4565 IPW_DEBUG_INFO("exit\n");
4568 static int ipw2100_rx_allocate(struct ipw2100_priv
*priv
)
4570 int i
, j
, err
= -EINVAL
;
4572 IPW_DEBUG_INFO("enter\n");
4574 err
= bd_queue_allocate(priv
, &priv
->rx_queue
, RX_QUEUE_LENGTH
);
4576 IPW_DEBUG_INFO("failed bd_queue_allocate\n");
4580 err
= status_queue_allocate(priv
, RX_QUEUE_LENGTH
);
4582 IPW_DEBUG_INFO("failed status_queue_allocate\n");
4583 bd_queue_free(priv
, &priv
->rx_queue
);
4590 priv
->rx_buffers
= kmalloc(RX_QUEUE_LENGTH
*
4591 sizeof(struct ipw2100_rx_packet
),
4593 if (!priv
->rx_buffers
) {
4594 IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
4596 bd_queue_free(priv
, &priv
->rx_queue
);
4598 status_queue_free(priv
);
4603 for (i
= 0; i
< RX_QUEUE_LENGTH
; i
++) {
4604 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
4606 err
= ipw2100_alloc_skb(priv
, packet
);
4607 if (unlikely(err
)) {
4612 /* The BD holds the cache aligned address */
4613 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
4614 priv
->rx_queue
.drv
[i
].buf_length
= IPW_RX_NIC_BUFFER_LENGTH
;
4615 priv
->status_queue
.drv
[i
].status_fields
= 0;
4618 if (i
== RX_QUEUE_LENGTH
)
4621 for (j
= 0; j
< i
; j
++) {
4622 pci_unmap_single(priv
->pci_dev
, priv
->rx_buffers
[j
].dma_addr
,
4623 sizeof(struct ipw2100_rx_packet
),
4624 PCI_DMA_FROMDEVICE
);
4625 dev_kfree_skb(priv
->rx_buffers
[j
].skb
);
4628 kfree(priv
->rx_buffers
);
4629 priv
->rx_buffers
= NULL
;
4631 bd_queue_free(priv
, &priv
->rx_queue
);
4633 status_queue_free(priv
);
4638 static void ipw2100_rx_initialize(struct ipw2100_priv
*priv
)
4640 IPW_DEBUG_INFO("enter\n");
4642 priv
->rx_queue
.oldest
= 0;
4643 priv
->rx_queue
.available
= priv
->rx_queue
.entries
- 1;
4644 priv
->rx_queue
.next
= priv
->rx_queue
.entries
- 1;
4646 INIT_STAT(&priv
->rxq_stat
);
4647 SET_STAT(&priv
->rxq_stat
, priv
->rx_queue
.available
);
4649 bd_queue_initialize(priv
, &priv
->rx_queue
,
4650 IPW_MEM_HOST_SHARED_RX_BD_BASE
,
4651 IPW_MEM_HOST_SHARED_RX_BD_SIZE
,
4652 IPW_MEM_HOST_SHARED_RX_READ_INDEX
,
4653 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
);
4655 /* set up the status queue */
4656 write_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_STATUS_BASE
,
4657 priv
->status_queue
.nic
);
4659 IPW_DEBUG_INFO("exit\n");
4662 static void ipw2100_rx_free(struct ipw2100_priv
*priv
)
4666 IPW_DEBUG_INFO("enter\n");
4668 bd_queue_free(priv
, &priv
->rx_queue
);
4669 status_queue_free(priv
);
4671 if (!priv
->rx_buffers
)
4674 for (i
= 0; i
< RX_QUEUE_LENGTH
; i
++) {
4675 if (priv
->rx_buffers
[i
].rxp
) {
4676 pci_unmap_single(priv
->pci_dev
,
4677 priv
->rx_buffers
[i
].dma_addr
,
4678 sizeof(struct ipw2100_rx
),
4679 PCI_DMA_FROMDEVICE
);
4680 dev_kfree_skb(priv
->rx_buffers
[i
].skb
);
4684 kfree(priv
->rx_buffers
);
4685 priv
->rx_buffers
= NULL
;
4687 IPW_DEBUG_INFO("exit\n");
4690 static int ipw2100_read_mac_address(struct ipw2100_priv
*priv
)
4692 u32 length
= ETH_ALEN
;
4697 err
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ADAPTER_MAC
, addr
, &length
);
4699 IPW_DEBUG_INFO("MAC address read failed\n");
4703 memcpy(priv
->net_dev
->dev_addr
, addr
, ETH_ALEN
);
4704 IPW_DEBUG_INFO("card MAC is %pM\n", priv
->net_dev
->dev_addr
);
4709 /********************************************************************
4713 ********************************************************************/
4715 static int ipw2100_set_mac_address(struct ipw2100_priv
*priv
, int batch_mode
)
4717 struct host_command cmd
= {
4718 .host_command
= ADAPTER_ADDRESS
,
4719 .host_command_sequence
= 0,
4720 .host_command_length
= ETH_ALEN
4724 IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
4726 IPW_DEBUG_INFO("enter\n");
4728 if (priv
->config
& CFG_CUSTOM_MAC
) {
4729 memcpy(cmd
.host_command_parameters
, priv
->mac_addr
, ETH_ALEN
);
4730 memcpy(priv
->net_dev
->dev_addr
, priv
->mac_addr
, ETH_ALEN
);
4732 memcpy(cmd
.host_command_parameters
, priv
->net_dev
->dev_addr
,
4735 err
= ipw2100_hw_send_command(priv
, &cmd
);
4737 IPW_DEBUG_INFO("exit\n");
4741 static int ipw2100_set_port_type(struct ipw2100_priv
*priv
, u32 port_type
,
4744 struct host_command cmd
= {
4745 .host_command
= PORT_TYPE
,
4746 .host_command_sequence
= 0,
4747 .host_command_length
= sizeof(u32
)
4751 switch (port_type
) {
4753 cmd
.host_command_parameters
[0] = IPW_BSS
;
4756 cmd
.host_command_parameters
[0] = IPW_IBSS
;
4760 IPW_DEBUG_HC("PORT_TYPE: %s\n",
4761 port_type
== IPW_IBSS
? "Ad-Hoc" : "Managed");
4764 err
= ipw2100_disable_adapter(priv
);
4766 printk(KERN_ERR DRV_NAME
4767 ": %s: Could not disable adapter %d\n",
4768 priv
->net_dev
->name
, err
);
4773 /* send cmd to firmware */
4774 err
= ipw2100_hw_send_command(priv
, &cmd
);
4777 ipw2100_enable_adapter(priv
);
4782 static int ipw2100_set_channel(struct ipw2100_priv
*priv
, u32 channel
,
4785 struct host_command cmd
= {
4786 .host_command
= CHANNEL
,
4787 .host_command_sequence
= 0,
4788 .host_command_length
= sizeof(u32
)
4792 cmd
.host_command_parameters
[0] = channel
;
4794 IPW_DEBUG_HC("CHANNEL: %d\n", channel
);
4796 /* If BSS then we don't support channel selection */
4797 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
)
4800 if ((channel
!= 0) &&
4801 ((channel
< REG_MIN_CHANNEL
) || (channel
> REG_MAX_CHANNEL
)))
4805 err
= ipw2100_disable_adapter(priv
);
4810 err
= ipw2100_hw_send_command(priv
, &cmd
);
4812 IPW_DEBUG_INFO("Failed to set channel to %d", channel
);
4817 priv
->config
|= CFG_STATIC_CHANNEL
;
4819 priv
->config
&= ~CFG_STATIC_CHANNEL
;
4821 priv
->channel
= channel
;
4824 err
= ipw2100_enable_adapter(priv
);
4832 static int ipw2100_system_config(struct ipw2100_priv
*priv
, int batch_mode
)
4834 struct host_command cmd
= {
4835 .host_command
= SYSTEM_CONFIG
,
4836 .host_command_sequence
= 0,
4837 .host_command_length
= 12,
4839 u32 ibss_mask
, len
= sizeof(u32
);
4842 /* Set system configuration */
4845 err
= ipw2100_disable_adapter(priv
);
4850 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
)
4851 cmd
.host_command_parameters
[0] |= IPW_CFG_IBSS_AUTO_START
;
4853 cmd
.host_command_parameters
[0] |= IPW_CFG_IBSS_MASK
|
4854 IPW_CFG_BSS_MASK
| IPW_CFG_802_1x_ENABLE
;
4856 if (!(priv
->config
& CFG_LONG_PREAMBLE
))
4857 cmd
.host_command_parameters
[0] |= IPW_CFG_PREAMBLE_AUTO
;
4859 err
= ipw2100_get_ordinal(priv
,
4860 IPW_ORD_EEPROM_IBSS_11B_CHANNELS
,
4863 ibss_mask
= IPW_IBSS_11B_DEFAULT_MASK
;
4865 cmd
.host_command_parameters
[1] = REG_CHANNEL_MASK
;
4866 cmd
.host_command_parameters
[2] = REG_CHANNEL_MASK
& ibss_mask
;
4869 /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A; */
4871 err
= ipw2100_hw_send_command(priv
, &cmd
);
4875 /* If IPv6 is configured in the kernel then we don't want to filter out all
4876 * of the multicast packets as IPv6 needs some. */
4877 #if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
4878 cmd
.host_command
= ADD_MULTICAST
;
4879 cmd
.host_command_sequence
= 0;
4880 cmd
.host_command_length
= 0;
4882 ipw2100_hw_send_command(priv
, &cmd
);
4885 err
= ipw2100_enable_adapter(priv
);
4893 static int ipw2100_set_tx_rates(struct ipw2100_priv
*priv
, u32 rate
,
4896 struct host_command cmd
= {
4897 .host_command
= BASIC_TX_RATES
,
4898 .host_command_sequence
= 0,
4899 .host_command_length
= 4
4903 cmd
.host_command_parameters
[0] = rate
& TX_RATE_MASK
;
4906 err
= ipw2100_disable_adapter(priv
);
4911 /* Set BASIC TX Rate first */
4912 ipw2100_hw_send_command(priv
, &cmd
);
4915 cmd
.host_command
= TX_RATES
;
4916 ipw2100_hw_send_command(priv
, &cmd
);
4918 /* Set MSDU TX Rate */
4919 cmd
.host_command
= MSDU_TX_RATES
;
4920 ipw2100_hw_send_command(priv
, &cmd
);
4923 err
= ipw2100_enable_adapter(priv
);
4928 priv
->tx_rates
= rate
;
4933 static int ipw2100_set_power_mode(struct ipw2100_priv
*priv
, int power_level
)
4935 struct host_command cmd
= {
4936 .host_command
= POWER_MODE
,
4937 .host_command_sequence
= 0,
4938 .host_command_length
= 4
4942 cmd
.host_command_parameters
[0] = power_level
;
4944 err
= ipw2100_hw_send_command(priv
, &cmd
);
4948 if (power_level
== IPW_POWER_MODE_CAM
)
4949 priv
->power_mode
= IPW_POWER_LEVEL(priv
->power_mode
);
4951 priv
->power_mode
= IPW_POWER_ENABLED
| power_level
;
4953 #ifdef IPW2100_TX_POWER
4954 if (priv
->port_type
== IBSS
&& priv
->adhoc_power
!= DFTL_IBSS_TX_POWER
) {
4955 /* Set beacon interval */
4956 cmd
.host_command
= TX_POWER_INDEX
;
4957 cmd
.host_command_parameters
[0] = (u32
) priv
->adhoc_power
;
4959 err
= ipw2100_hw_send_command(priv
, &cmd
);
4968 static int ipw2100_set_rts_threshold(struct ipw2100_priv
*priv
, u32 threshold
)
4970 struct host_command cmd
= {
4971 .host_command
= RTS_THRESHOLD
,
4972 .host_command_sequence
= 0,
4973 .host_command_length
= 4
4977 if (threshold
& RTS_DISABLED
)
4978 cmd
.host_command_parameters
[0] = MAX_RTS_THRESHOLD
;
4980 cmd
.host_command_parameters
[0] = threshold
& ~RTS_DISABLED
;
4982 err
= ipw2100_hw_send_command(priv
, &cmd
);
4986 priv
->rts_threshold
= threshold
;
4992 int ipw2100_set_fragmentation_threshold(struct ipw2100_priv
*priv
,
4993 u32 threshold
, int batch_mode
)
4995 struct host_command cmd
= {
4996 .host_command
= FRAG_THRESHOLD
,
4997 .host_command_sequence
= 0,
4998 .host_command_length
= 4,
4999 .host_command_parameters
[0] = 0,
5004 err
= ipw2100_disable_adapter(priv
);
5010 threshold
= DEFAULT_FRAG_THRESHOLD
;
5012 threshold
= max(threshold
, MIN_FRAG_THRESHOLD
);
5013 threshold
= min(threshold
, MAX_FRAG_THRESHOLD
);
5016 cmd
.host_command_parameters
[0] = threshold
;
5018 IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold
);
5020 err
= ipw2100_hw_send_command(priv
, &cmd
);
5023 ipw2100_enable_adapter(priv
);
5026 priv
->frag_threshold
= threshold
;
5032 static int ipw2100_set_short_retry(struct ipw2100_priv
*priv
, u32 retry
)
5034 struct host_command cmd
= {
5035 .host_command
= SHORT_RETRY_LIMIT
,
5036 .host_command_sequence
= 0,
5037 .host_command_length
= 4
5041 cmd
.host_command_parameters
[0] = retry
;
5043 err
= ipw2100_hw_send_command(priv
, &cmd
);
5047 priv
->short_retry_limit
= retry
;
5052 static int ipw2100_set_long_retry(struct ipw2100_priv
*priv
, u32 retry
)
5054 struct host_command cmd
= {
5055 .host_command
= LONG_RETRY_LIMIT
,
5056 .host_command_sequence
= 0,
5057 .host_command_length
= 4
5061 cmd
.host_command_parameters
[0] = retry
;
5063 err
= ipw2100_hw_send_command(priv
, &cmd
);
5067 priv
->long_retry_limit
= retry
;
5072 static int ipw2100_set_mandatory_bssid(struct ipw2100_priv
*priv
, u8
* bssid
,
5075 struct host_command cmd
= {
5076 .host_command
= MANDATORY_BSSID
,
5077 .host_command_sequence
= 0,
5078 .host_command_length
= (bssid
== NULL
) ? 0 : ETH_ALEN
5082 #ifdef CONFIG_IPW2100_DEBUG
5084 IPW_DEBUG_HC("MANDATORY_BSSID: %pM\n", bssid
);
5086 IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
5088 /* if BSSID is empty then we disable mandatory bssid mode */
5090 memcpy(cmd
.host_command_parameters
, bssid
, ETH_ALEN
);
5093 err
= ipw2100_disable_adapter(priv
);
5098 err
= ipw2100_hw_send_command(priv
, &cmd
);
5101 ipw2100_enable_adapter(priv
);
5106 static int ipw2100_disassociate_bssid(struct ipw2100_priv
*priv
)
5108 struct host_command cmd
= {
5109 .host_command
= DISASSOCIATION_BSSID
,
5110 .host_command_sequence
= 0,
5111 .host_command_length
= ETH_ALEN
5116 IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
5119 /* The Firmware currently ignores the BSSID and just disassociates from
5120 * the currently associated AP -- but in the off chance that a future
5121 * firmware does use the BSSID provided here, we go ahead and try and
5122 * set it to the currently associated AP's BSSID */
5123 memcpy(cmd
.host_command_parameters
, priv
->bssid
, ETH_ALEN
);
5125 err
= ipw2100_hw_send_command(priv
, &cmd
);
5130 static int ipw2100_set_wpa_ie(struct ipw2100_priv
*,
5131 struct ipw2100_wpa_assoc_frame
*, int)
5132 __attribute__ ((unused
));
5134 static int ipw2100_set_wpa_ie(struct ipw2100_priv
*priv
,
5135 struct ipw2100_wpa_assoc_frame
*wpa_frame
,
5138 struct host_command cmd
= {
5139 .host_command
= SET_WPA_IE
,
5140 .host_command_sequence
= 0,
5141 .host_command_length
= sizeof(struct ipw2100_wpa_assoc_frame
),
5145 IPW_DEBUG_HC("SET_WPA_IE\n");
5148 err
= ipw2100_disable_adapter(priv
);
5153 memcpy(cmd
.host_command_parameters
, wpa_frame
,
5154 sizeof(struct ipw2100_wpa_assoc_frame
));
5156 err
= ipw2100_hw_send_command(priv
, &cmd
);
5159 if (ipw2100_enable_adapter(priv
))
5166 struct security_info_params
{
5167 u32 allowed_ciphers
;
5170 u8 replay_counters_number
;
5171 u8 unicast_using_group
;
5174 static int ipw2100_set_security_information(struct ipw2100_priv
*priv
,
5177 int unicast_using_group
,
5180 struct host_command cmd
= {
5181 .host_command
= SET_SECURITY_INFORMATION
,
5182 .host_command_sequence
= 0,
5183 .host_command_length
= sizeof(struct security_info_params
)
5185 struct security_info_params
*security
=
5186 (struct security_info_params
*)&cmd
.host_command_parameters
;
5188 memset(security
, 0, sizeof(*security
));
5190 /* If shared key AP authentication is turned on, then we need to
5191 * configure the firmware to try and use it.
5193 * Actual data encryption/decryption is handled by the host. */
5194 security
->auth_mode
= auth_mode
;
5195 security
->unicast_using_group
= unicast_using_group
;
5197 switch (security_level
) {
5200 security
->allowed_ciphers
= IPW_NONE_CIPHER
;
5203 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5207 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5208 IPW_WEP104_CIPHER
| IPW_TKIP_CIPHER
;
5210 case SEC_LEVEL_2_CKIP
:
5211 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5212 IPW_WEP104_CIPHER
| IPW_CKIP_CIPHER
;
5215 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5216 IPW_WEP104_CIPHER
| IPW_TKIP_CIPHER
| IPW_CCMP_CIPHER
;
5221 ("SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
5222 security
->auth_mode
, security
->allowed_ciphers
, security_level
);
5224 security
->replay_counters_number
= 0;
5227 err
= ipw2100_disable_adapter(priv
);
5232 err
= ipw2100_hw_send_command(priv
, &cmd
);
5235 ipw2100_enable_adapter(priv
);
5240 static int ipw2100_set_tx_power(struct ipw2100_priv
*priv
, u32 tx_power
)
5242 struct host_command cmd
= {
5243 .host_command
= TX_POWER_INDEX
,
5244 .host_command_sequence
= 0,
5245 .host_command_length
= 4
5250 if (tx_power
!= IPW_TX_POWER_DEFAULT
)
5251 tmp
= (tx_power
- IPW_TX_POWER_MIN_DBM
) * 16 /
5252 (IPW_TX_POWER_MAX_DBM
- IPW_TX_POWER_MIN_DBM
);
5254 cmd
.host_command_parameters
[0] = tmp
;
5256 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
)
5257 err
= ipw2100_hw_send_command(priv
, &cmd
);
5259 priv
->tx_power
= tx_power
;
5264 static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv
*priv
,
5265 u32 interval
, int batch_mode
)
5267 struct host_command cmd
= {
5268 .host_command
= BEACON_INTERVAL
,
5269 .host_command_sequence
= 0,
5270 .host_command_length
= 4
5274 cmd
.host_command_parameters
[0] = interval
;
5276 IPW_DEBUG_INFO("enter\n");
5278 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5280 err
= ipw2100_disable_adapter(priv
);
5285 ipw2100_hw_send_command(priv
, &cmd
);
5288 err
= ipw2100_enable_adapter(priv
);
5294 IPW_DEBUG_INFO("exit\n");
5299 static void ipw2100_queues_initialize(struct ipw2100_priv
*priv
)
5301 ipw2100_tx_initialize(priv
);
5302 ipw2100_rx_initialize(priv
);
5303 ipw2100_msg_initialize(priv
);
5306 static void ipw2100_queues_free(struct ipw2100_priv
*priv
)
5308 ipw2100_tx_free(priv
);
5309 ipw2100_rx_free(priv
);
5310 ipw2100_msg_free(priv
);
5313 static int ipw2100_queues_allocate(struct ipw2100_priv
*priv
)
5315 if (ipw2100_tx_allocate(priv
) ||
5316 ipw2100_rx_allocate(priv
) || ipw2100_msg_allocate(priv
))
5322 ipw2100_tx_free(priv
);
5323 ipw2100_rx_free(priv
);
5324 ipw2100_msg_free(priv
);
5328 #define IPW_PRIVACY_CAPABLE 0x0008
5330 static int ipw2100_set_wep_flags(struct ipw2100_priv
*priv
, u32 flags
,
5333 struct host_command cmd
= {
5334 .host_command
= WEP_FLAGS
,
5335 .host_command_sequence
= 0,
5336 .host_command_length
= 4
5340 cmd
.host_command_parameters
[0] = flags
;
5342 IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags
);
5345 err
= ipw2100_disable_adapter(priv
);
5347 printk(KERN_ERR DRV_NAME
5348 ": %s: Could not disable adapter %d\n",
5349 priv
->net_dev
->name
, err
);
5354 /* send cmd to firmware */
5355 err
= ipw2100_hw_send_command(priv
, &cmd
);
5358 ipw2100_enable_adapter(priv
);
5363 struct ipw2100_wep_key
{
5369 /* Macros to ease up priting WEP keys */
5370 #define WEP_FMT_64 "%02X%02X%02X%02X-%02X"
5371 #define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
5372 #define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
5373 #define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
5378 * @priv: struct to work on
5379 * @idx: index of the key we want to set
5380 * @key: ptr to the key data to set
5381 * @len: length of the buffer at @key
5382 * @batch_mode: FIXME perform the operation in batch mode, not
5383 * disabling the device.
5385 * @returns 0 if OK, < 0 errno code on error.
5387 * Fill out a command structure with the new wep key, length an
5388 * index and send it down the wire.
5390 static int ipw2100_set_key(struct ipw2100_priv
*priv
,
5391 int idx
, char *key
, int len
, int batch_mode
)
5393 int keylen
= len
? (len
<= 5 ? 5 : 13) : 0;
5394 struct host_command cmd
= {
5395 .host_command
= WEP_KEY_INFO
,
5396 .host_command_sequence
= 0,
5397 .host_command_length
= sizeof(struct ipw2100_wep_key
),
5399 struct ipw2100_wep_key
*wep_key
= (void *)cmd
.host_command_parameters
;
5402 IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
5405 /* NOTE: We don't check cached values in case the firmware was reset
5406 * or some other problem is occurring. If the user is setting the key,
5407 * then we push the change */
5410 wep_key
->len
= keylen
;
5413 memcpy(wep_key
->key
, key
, len
);
5414 memset(wep_key
->key
+ len
, 0, keylen
- len
);
5417 /* Will be optimized out on debug not being configured in */
5419 IPW_DEBUG_WEP("%s: Clearing key %d\n",
5420 priv
->net_dev
->name
, wep_key
->idx
);
5421 else if (keylen
== 5)
5422 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64
"\n",
5423 priv
->net_dev
->name
, wep_key
->idx
, wep_key
->len
,
5424 WEP_STR_64(wep_key
->key
));
5426 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
5428 priv
->net_dev
->name
, wep_key
->idx
, wep_key
->len
,
5429 WEP_STR_128(wep_key
->key
));
5432 err
= ipw2100_disable_adapter(priv
);
5433 /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
5435 printk(KERN_ERR DRV_NAME
5436 ": %s: Could not disable adapter %d\n",
5437 priv
->net_dev
->name
, err
);
5442 /* send cmd to firmware */
5443 err
= ipw2100_hw_send_command(priv
, &cmd
);
5446 int err2
= ipw2100_enable_adapter(priv
);
5453 static int ipw2100_set_key_index(struct ipw2100_priv
*priv
,
5454 int idx
, int batch_mode
)
5456 struct host_command cmd
= {
5457 .host_command
= WEP_KEY_INDEX
,
5458 .host_command_sequence
= 0,
5459 .host_command_length
= 4,
5460 .host_command_parameters
= {idx
},
5464 IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx
);
5466 if (idx
< 0 || idx
> 3)
5470 err
= ipw2100_disable_adapter(priv
);
5472 printk(KERN_ERR DRV_NAME
5473 ": %s: Could not disable adapter %d\n",
5474 priv
->net_dev
->name
, err
);
5479 /* send cmd to firmware */
5480 err
= ipw2100_hw_send_command(priv
, &cmd
);
5483 ipw2100_enable_adapter(priv
);
5488 static int ipw2100_configure_security(struct ipw2100_priv
*priv
, int batch_mode
)
5490 int i
, err
, auth_mode
, sec_level
, use_group
;
5492 if (!(priv
->status
& STATUS_RUNNING
))
5496 err
= ipw2100_disable_adapter(priv
);
5501 if (!priv
->ieee
->sec
.enabled
) {
5503 ipw2100_set_security_information(priv
, IPW_AUTH_OPEN
,
5506 auth_mode
= IPW_AUTH_OPEN
;
5507 if (priv
->ieee
->sec
.flags
& SEC_AUTH_MODE
) {
5508 if (priv
->ieee
->sec
.auth_mode
== WLAN_AUTH_SHARED_KEY
)
5509 auth_mode
= IPW_AUTH_SHARED
;
5510 else if (priv
->ieee
->sec
.auth_mode
== WLAN_AUTH_LEAP
)
5511 auth_mode
= IPW_AUTH_LEAP_CISCO_ID
;
5514 sec_level
= SEC_LEVEL_0
;
5515 if (priv
->ieee
->sec
.flags
& SEC_LEVEL
)
5516 sec_level
= priv
->ieee
->sec
.level
;
5519 if (priv
->ieee
->sec
.flags
& SEC_UNICAST_GROUP
)
5520 use_group
= priv
->ieee
->sec
.unicast_uses_group
;
5523 ipw2100_set_security_information(priv
, auth_mode
, sec_level
,
5530 if (priv
->ieee
->sec
.enabled
) {
5531 for (i
= 0; i
< 4; i
++) {
5532 if (!(priv
->ieee
->sec
.flags
& (1 << i
))) {
5533 memset(priv
->ieee
->sec
.keys
[i
], 0, WEP_KEY_LEN
);
5534 priv
->ieee
->sec
.key_sizes
[i
] = 0;
5536 err
= ipw2100_set_key(priv
, i
,
5537 priv
->ieee
->sec
.keys
[i
],
5545 ipw2100_set_key_index(priv
, priv
->ieee
->crypt_info
.tx_keyidx
, 1);
5548 /* Always enable privacy so the Host can filter WEP packets if
5549 * encrypted data is sent up */
5551 ipw2100_set_wep_flags(priv
,
5553 enabled
? IPW_PRIVACY_CAPABLE
: 0, 1);
5557 priv
->status
&= ~STATUS_SECURITY_UPDATED
;
5561 ipw2100_enable_adapter(priv
);
5566 static void ipw2100_security_work(struct work_struct
*work
)
5568 struct ipw2100_priv
*priv
=
5569 container_of(work
, struct ipw2100_priv
, security_work
.work
);
5571 /* If we happen to have reconnected before we get a chance to
5572 * process this, then update the security settings--which causes
5573 * a disassociation to occur */
5574 if (!(priv
->status
& STATUS_ASSOCIATED
) &&
5575 priv
->status
& STATUS_SECURITY_UPDATED
)
5576 ipw2100_configure_security(priv
, 0);
5579 static void shim__set_security(struct net_device
*dev
,
5580 struct libipw_security
*sec
)
5582 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5583 int i
, force_update
= 0;
5585 mutex_lock(&priv
->action_mutex
);
5586 if (!(priv
->status
& STATUS_INITIALIZED
))
5589 for (i
= 0; i
< 4; i
++) {
5590 if (sec
->flags
& (1 << i
)) {
5591 priv
->ieee
->sec
.key_sizes
[i
] = sec
->key_sizes
[i
];
5592 if (sec
->key_sizes
[i
] == 0)
5593 priv
->ieee
->sec
.flags
&= ~(1 << i
);
5595 memcpy(priv
->ieee
->sec
.keys
[i
], sec
->keys
[i
],
5597 if (sec
->level
== SEC_LEVEL_1
) {
5598 priv
->ieee
->sec
.flags
|= (1 << i
);
5599 priv
->status
|= STATUS_SECURITY_UPDATED
;
5601 priv
->ieee
->sec
.flags
&= ~(1 << i
);
5605 if ((sec
->flags
& SEC_ACTIVE_KEY
) &&
5606 priv
->ieee
->sec
.active_key
!= sec
->active_key
) {
5607 if (sec
->active_key
<= 3) {
5608 priv
->ieee
->sec
.active_key
= sec
->active_key
;
5609 priv
->ieee
->sec
.flags
|= SEC_ACTIVE_KEY
;
5611 priv
->ieee
->sec
.flags
&= ~SEC_ACTIVE_KEY
;
5613 priv
->status
|= STATUS_SECURITY_UPDATED
;
5616 if ((sec
->flags
& SEC_AUTH_MODE
) &&
5617 (priv
->ieee
->sec
.auth_mode
!= sec
->auth_mode
)) {
5618 priv
->ieee
->sec
.auth_mode
= sec
->auth_mode
;
5619 priv
->ieee
->sec
.flags
|= SEC_AUTH_MODE
;
5620 priv
->status
|= STATUS_SECURITY_UPDATED
;
5623 if (sec
->flags
& SEC_ENABLED
&& priv
->ieee
->sec
.enabled
!= sec
->enabled
) {
5624 priv
->ieee
->sec
.flags
|= SEC_ENABLED
;
5625 priv
->ieee
->sec
.enabled
= sec
->enabled
;
5626 priv
->status
|= STATUS_SECURITY_UPDATED
;
5630 if (sec
->flags
& SEC_ENCRYPT
)
5631 priv
->ieee
->sec
.encrypt
= sec
->encrypt
;
5633 if (sec
->flags
& SEC_LEVEL
&& priv
->ieee
->sec
.level
!= sec
->level
) {
5634 priv
->ieee
->sec
.level
= sec
->level
;
5635 priv
->ieee
->sec
.flags
|= SEC_LEVEL
;
5636 priv
->status
|= STATUS_SECURITY_UPDATED
;
5639 IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
5640 priv
->ieee
->sec
.flags
& (1 << 8) ? '1' : '0',
5641 priv
->ieee
->sec
.flags
& (1 << 7) ? '1' : '0',
5642 priv
->ieee
->sec
.flags
& (1 << 6) ? '1' : '0',
5643 priv
->ieee
->sec
.flags
& (1 << 5) ? '1' : '0',
5644 priv
->ieee
->sec
.flags
& (1 << 4) ? '1' : '0',
5645 priv
->ieee
->sec
.flags
& (1 << 3) ? '1' : '0',
5646 priv
->ieee
->sec
.flags
& (1 << 2) ? '1' : '0',
5647 priv
->ieee
->sec
.flags
& (1 << 1) ? '1' : '0',
5648 priv
->ieee
->sec
.flags
& (1 << 0) ? '1' : '0');
5650 /* As a temporary work around to enable WPA until we figure out why
5651 * wpa_supplicant toggles the security capability of the driver, which
5652 * forces a disassociation with force_update...
5654 * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
5655 if (!(priv
->status
& (STATUS_ASSOCIATED
| STATUS_ASSOCIATING
)))
5656 ipw2100_configure_security(priv
, 0);
5658 mutex_unlock(&priv
->action_mutex
);
5661 static int ipw2100_adapter_setup(struct ipw2100_priv
*priv
)
5667 IPW_DEBUG_INFO("enter\n");
5669 err
= ipw2100_disable_adapter(priv
);
5672 #ifdef CONFIG_IPW2100_MONITOR
5673 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
5674 err
= ipw2100_set_channel(priv
, priv
->channel
, batch_mode
);
5678 IPW_DEBUG_INFO("exit\n");
5682 #endif /* CONFIG_IPW2100_MONITOR */
5684 err
= ipw2100_read_mac_address(priv
);
5688 err
= ipw2100_set_mac_address(priv
, batch_mode
);
5692 err
= ipw2100_set_port_type(priv
, priv
->ieee
->iw_mode
, batch_mode
);
5696 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5697 err
= ipw2100_set_channel(priv
, priv
->channel
, batch_mode
);
5702 err
= ipw2100_system_config(priv
, batch_mode
);
5706 err
= ipw2100_set_tx_rates(priv
, priv
->tx_rates
, batch_mode
);
5710 /* Default to power mode OFF */
5711 err
= ipw2100_set_power_mode(priv
, IPW_POWER_MODE_CAM
);
5715 err
= ipw2100_set_rts_threshold(priv
, priv
->rts_threshold
);
5719 if (priv
->config
& CFG_STATIC_BSSID
)
5720 bssid
= priv
->bssid
;
5723 err
= ipw2100_set_mandatory_bssid(priv
, bssid
, batch_mode
);
5727 if (priv
->config
& CFG_STATIC_ESSID
)
5728 err
= ipw2100_set_essid(priv
, priv
->essid
, priv
->essid_len
,
5731 err
= ipw2100_set_essid(priv
, NULL
, 0, batch_mode
);
5735 err
= ipw2100_configure_security(priv
, batch_mode
);
5739 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5741 ipw2100_set_ibss_beacon_interval(priv
,
5742 priv
->beacon_interval
,
5747 err
= ipw2100_set_tx_power(priv
, priv
->tx_power
);
5753 err = ipw2100_set_fragmentation_threshold(
5754 priv, priv->frag_threshold, batch_mode);
5759 IPW_DEBUG_INFO("exit\n");
5764 /*************************************************************************
5766 * EXTERNALLY CALLED METHODS
5768 *************************************************************************/
5770 /* This method is called by the network layer -- not to be confused with
5771 * ipw2100_set_mac_address() declared above called by this driver (and this
5772 * method as well) to talk to the firmware */
5773 static int ipw2100_set_address(struct net_device
*dev
, void *p
)
5775 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5776 struct sockaddr
*addr
= p
;
5779 if (!is_valid_ether_addr(addr
->sa_data
))
5780 return -EADDRNOTAVAIL
;
5782 mutex_lock(&priv
->action_mutex
);
5784 priv
->config
|= CFG_CUSTOM_MAC
;
5785 memcpy(priv
->mac_addr
, addr
->sa_data
, ETH_ALEN
);
5787 err
= ipw2100_set_mac_address(priv
, 0);
5791 priv
->reset_backoff
= 0;
5792 mutex_unlock(&priv
->action_mutex
);
5793 ipw2100_reset_adapter(&priv
->reset_work
.work
);
5797 mutex_unlock(&priv
->action_mutex
);
5801 static int ipw2100_open(struct net_device
*dev
)
5803 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5804 unsigned long flags
;
5805 IPW_DEBUG_INFO("dev->open\n");
5807 spin_lock_irqsave(&priv
->low_lock
, flags
);
5808 if (priv
->status
& STATUS_ASSOCIATED
) {
5809 netif_carrier_on(dev
);
5810 netif_start_queue(dev
);
5812 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5817 static int ipw2100_close(struct net_device
*dev
)
5819 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5820 unsigned long flags
;
5821 struct list_head
*element
;
5822 struct ipw2100_tx_packet
*packet
;
5824 IPW_DEBUG_INFO("enter\n");
5826 spin_lock_irqsave(&priv
->low_lock
, flags
);
5828 if (priv
->status
& STATUS_ASSOCIATED
)
5829 netif_carrier_off(dev
);
5830 netif_stop_queue(dev
);
5832 /* Flush the TX queue ... */
5833 while (!list_empty(&priv
->tx_pend_list
)) {
5834 element
= priv
->tx_pend_list
.next
;
5835 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
5838 DEC_STAT(&priv
->tx_pend_stat
);
5840 libipw_txb_free(packet
->info
.d_struct
.txb
);
5841 packet
->info
.d_struct
.txb
= NULL
;
5843 list_add_tail(element
, &priv
->tx_free_list
);
5844 INC_STAT(&priv
->tx_free_stat
);
5846 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5848 IPW_DEBUG_INFO("exit\n");
5854 * TODO: Fix this function... its just wrong
5856 static void ipw2100_tx_timeout(struct net_device
*dev
)
5858 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5860 dev
->stats
.tx_errors
++;
5862 #ifdef CONFIG_IPW2100_MONITOR
5863 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
5867 IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n",
5869 schedule_reset(priv
);
5872 static int ipw2100_wpa_enable(struct ipw2100_priv
*priv
, int value
)
5874 /* This is called when wpa_supplicant loads and closes the driver
5876 priv
->ieee
->wpa_enabled
= value
;
5880 static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv
*priv
, int value
)
5883 struct libipw_device
*ieee
= priv
->ieee
;
5884 struct libipw_security sec
= {
5885 .flags
= SEC_AUTH_MODE
,
5889 if (value
& IW_AUTH_ALG_SHARED_KEY
) {
5890 sec
.auth_mode
= WLAN_AUTH_SHARED_KEY
;
5892 } else if (value
& IW_AUTH_ALG_OPEN_SYSTEM
) {
5893 sec
.auth_mode
= WLAN_AUTH_OPEN
;
5895 } else if (value
& IW_AUTH_ALG_LEAP
) {
5896 sec
.auth_mode
= WLAN_AUTH_LEAP
;
5901 if (ieee
->set_security
)
5902 ieee
->set_security(ieee
->dev
, &sec
);
5909 static void ipw2100_wpa_assoc_frame(struct ipw2100_priv
*priv
,
5910 char *wpa_ie
, int wpa_ie_len
)
5913 struct ipw2100_wpa_assoc_frame frame
;
5915 frame
.fixed_ie_mask
= 0;
5918 memcpy(frame
.var_ie
, wpa_ie
, wpa_ie_len
);
5919 frame
.var_ie_len
= wpa_ie_len
;
5921 /* make sure WPA is enabled */
5922 ipw2100_wpa_enable(priv
, 1);
5923 ipw2100_set_wpa_ie(priv
, &frame
, 0);
5926 static void ipw_ethtool_get_drvinfo(struct net_device
*dev
,
5927 struct ethtool_drvinfo
*info
)
5929 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5930 char fw_ver
[64], ucode_ver
[64];
5932 strlcpy(info
->driver
, DRV_NAME
, sizeof(info
->driver
));
5933 strlcpy(info
->version
, DRV_VERSION
, sizeof(info
->version
));
5935 ipw2100_get_fwversion(priv
, fw_ver
, sizeof(fw_ver
));
5936 ipw2100_get_ucodeversion(priv
, ucode_ver
, sizeof(ucode_ver
));
5938 snprintf(info
->fw_version
, sizeof(info
->fw_version
), "%s:%d:%s",
5939 fw_ver
, priv
->eeprom_version
, ucode_ver
);
5941 strlcpy(info
->bus_info
, pci_name(priv
->pci_dev
),
5942 sizeof(info
->bus_info
));
5945 static u32
ipw2100_ethtool_get_link(struct net_device
*dev
)
5947 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5948 return (priv
->status
& STATUS_ASSOCIATED
) ? 1 : 0;
5951 static const struct ethtool_ops ipw2100_ethtool_ops
= {
5952 .get_link
= ipw2100_ethtool_get_link
,
5953 .get_drvinfo
= ipw_ethtool_get_drvinfo
,
5956 static void ipw2100_hang_check(struct work_struct
*work
)
5958 struct ipw2100_priv
*priv
=
5959 container_of(work
, struct ipw2100_priv
, hang_check
.work
);
5960 unsigned long flags
;
5961 u32 rtc
= 0xa5a5a5a5;
5962 u32 len
= sizeof(rtc
);
5965 spin_lock_irqsave(&priv
->low_lock
, flags
);
5967 if (priv
->fatal_error
!= 0) {
5968 /* If fatal_error is set then we need to restart */
5969 IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
5970 priv
->net_dev
->name
);
5973 } else if (ipw2100_get_ordinal(priv
, IPW_ORD_RTC_TIME
, &rtc
, &len
) ||
5974 (rtc
== priv
->last_rtc
)) {
5975 /* Check if firmware is hung */
5976 IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
5977 priv
->net_dev
->name
);
5984 priv
->stop_hang_check
= 1;
5987 /* Restart the NIC */
5988 schedule_reset(priv
);
5991 priv
->last_rtc
= rtc
;
5993 if (!priv
->stop_hang_check
)
5994 schedule_delayed_work(&priv
->hang_check
, HZ
/ 2);
5996 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5999 static void ipw2100_rf_kill(struct work_struct
*work
)
6001 struct ipw2100_priv
*priv
=
6002 container_of(work
, struct ipw2100_priv
, rf_kill
.work
);
6003 unsigned long flags
;
6005 spin_lock_irqsave(&priv
->low_lock
, flags
);
6007 if (rf_kill_active(priv
)) {
6008 IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
6009 if (!priv
->stop_rf_kill
)
6010 schedule_delayed_work(&priv
->rf_kill
,
6011 round_jiffies_relative(HZ
));
6015 /* RF Kill is now disabled, so bring the device back up */
6017 if (!(priv
->status
& STATUS_RF_KILL_MASK
)) {
6018 IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
6020 schedule_reset(priv
);
6022 IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still "
6026 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
6029 static void ipw2100_irq_tasklet(struct ipw2100_priv
*priv
);
6031 static const struct net_device_ops ipw2100_netdev_ops
= {
6032 .ndo_open
= ipw2100_open
,
6033 .ndo_stop
= ipw2100_close
,
6034 .ndo_start_xmit
= libipw_xmit
,
6035 .ndo_tx_timeout
= ipw2100_tx_timeout
,
6036 .ndo_set_mac_address
= ipw2100_set_address
,
6037 .ndo_validate_addr
= eth_validate_addr
,
6040 /* Look into using netdev destructor to shutdown libipw? */
6042 static struct net_device
*ipw2100_alloc_device(struct pci_dev
*pci_dev
,
6043 void __iomem
* ioaddr
)
6045 struct ipw2100_priv
*priv
;
6046 struct net_device
*dev
;
6048 dev
= alloc_libipw(sizeof(struct ipw2100_priv
), 0);
6051 priv
= libipw_priv(dev
);
6052 priv
->ieee
= netdev_priv(dev
);
6053 priv
->pci_dev
= pci_dev
;
6054 priv
->net_dev
= dev
;
6055 priv
->ioaddr
= ioaddr
;
6057 priv
->ieee
->hard_start_xmit
= ipw2100_tx
;
6058 priv
->ieee
->set_security
= shim__set_security
;
6060 priv
->ieee
->perfect_rssi
= -20;
6061 priv
->ieee
->worst_rssi
= -85;
6063 dev
->netdev_ops
= &ipw2100_netdev_ops
;
6064 dev
->ethtool_ops
= &ipw2100_ethtool_ops
;
6065 dev
->wireless_handlers
= &ipw2100_wx_handler_def
;
6066 priv
->wireless_data
.libipw
= priv
->ieee
;
6067 dev
->wireless_data
= &priv
->wireless_data
;
6068 dev
->watchdog_timeo
= 3 * HZ
;
6071 dev
->max_mtu
= LIBIPW_DATA_LEN
;
6073 /* NOTE: We don't use the wireless_handlers hook
6074 * in dev as the system will start throwing WX requests
6075 * to us before we're actually initialized and it just
6076 * ends up causing problems. So, we just handle
6077 * the WX extensions through the ipw2100_ioctl interface */
6079 /* memset() puts everything to 0, so we only have explicitly set
6080 * those values that need to be something else */
6082 /* If power management is turned on, default to AUTO mode */
6083 priv
->power_mode
= IPW_POWER_AUTO
;
6085 #ifdef CONFIG_IPW2100_MONITOR
6086 priv
->config
|= CFG_CRC_CHECK
;
6088 priv
->ieee
->wpa_enabled
= 0;
6089 priv
->ieee
->drop_unencrypted
= 0;
6090 priv
->ieee
->privacy_invoked
= 0;
6091 priv
->ieee
->ieee802_1x
= 1;
6093 /* Set module parameters */
6094 switch (network_mode
) {
6096 priv
->ieee
->iw_mode
= IW_MODE_ADHOC
;
6098 #ifdef CONFIG_IPW2100_MONITOR
6100 priv
->ieee
->iw_mode
= IW_MODE_MONITOR
;
6105 priv
->ieee
->iw_mode
= IW_MODE_INFRA
;
6110 priv
->status
|= STATUS_RF_KILL_SW
;
6113 ((channel
>= REG_MIN_CHANNEL
) && (channel
<= REG_MAX_CHANNEL
))) {
6114 priv
->config
|= CFG_STATIC_CHANNEL
;
6115 priv
->channel
= channel
;
6119 priv
->config
|= CFG_ASSOCIATE
;
6121 priv
->beacon_interval
= DEFAULT_BEACON_INTERVAL
;
6122 priv
->short_retry_limit
= DEFAULT_SHORT_RETRY_LIMIT
;
6123 priv
->long_retry_limit
= DEFAULT_LONG_RETRY_LIMIT
;
6124 priv
->rts_threshold
= DEFAULT_RTS_THRESHOLD
| RTS_DISABLED
;
6125 priv
->frag_threshold
= DEFAULT_FTS
| FRAG_DISABLED
;
6126 priv
->tx_power
= IPW_TX_POWER_DEFAULT
;
6127 priv
->tx_rates
= DEFAULT_TX_RATES
;
6129 strcpy(priv
->nick
, "ipw2100");
6131 spin_lock_init(&priv
->low_lock
);
6132 mutex_init(&priv
->action_mutex
);
6133 mutex_init(&priv
->adapter_mutex
);
6135 init_waitqueue_head(&priv
->wait_command_queue
);
6137 netif_carrier_off(dev
);
6139 INIT_LIST_HEAD(&priv
->msg_free_list
);
6140 INIT_LIST_HEAD(&priv
->msg_pend_list
);
6141 INIT_STAT(&priv
->msg_free_stat
);
6142 INIT_STAT(&priv
->msg_pend_stat
);
6144 INIT_LIST_HEAD(&priv
->tx_free_list
);
6145 INIT_LIST_HEAD(&priv
->tx_pend_list
);
6146 INIT_STAT(&priv
->tx_free_stat
);
6147 INIT_STAT(&priv
->tx_pend_stat
);
6149 INIT_LIST_HEAD(&priv
->fw_pend_list
);
6150 INIT_STAT(&priv
->fw_pend_stat
);
6152 INIT_DELAYED_WORK(&priv
->reset_work
, ipw2100_reset_adapter
);
6153 INIT_DELAYED_WORK(&priv
->security_work
, ipw2100_security_work
);
6154 INIT_DELAYED_WORK(&priv
->wx_event_work
, ipw2100_wx_event_work
);
6155 INIT_DELAYED_WORK(&priv
->hang_check
, ipw2100_hang_check
);
6156 INIT_DELAYED_WORK(&priv
->rf_kill
, ipw2100_rf_kill
);
6157 INIT_DELAYED_WORK(&priv
->scan_event
, ipw2100_scan_event
);
6159 tasklet_init(&priv
->irq_tasklet
, (void (*)(unsigned long))
6160 ipw2100_irq_tasklet
, (unsigned long)priv
);
6162 /* NOTE: We do not start the deferred work for status checks yet */
6163 priv
->stop_rf_kill
= 1;
6164 priv
->stop_hang_check
= 1;
6169 static int ipw2100_pci_init_one(struct pci_dev
*pci_dev
,
6170 const struct pci_device_id
*ent
)
6172 void __iomem
*ioaddr
;
6173 struct net_device
*dev
= NULL
;
6174 struct ipw2100_priv
*priv
= NULL
;
6179 IPW_DEBUG_INFO("enter\n");
6181 if (!(pci_resource_flags(pci_dev
, 0) & IORESOURCE_MEM
)) {
6182 IPW_DEBUG_INFO("weird - resource type is not memory\n");
6187 ioaddr
= pci_iomap(pci_dev
, 0, 0);
6189 printk(KERN_WARNING DRV_NAME
6190 "Error calling ioremap_nocache.\n");
6195 /* allocate and initialize our net_device */
6196 dev
= ipw2100_alloc_device(pci_dev
, ioaddr
);
6198 printk(KERN_WARNING DRV_NAME
6199 "Error calling ipw2100_alloc_device.\n");
6204 /* set up PCI mappings for device */
6205 err
= pci_enable_device(pci_dev
);
6207 printk(KERN_WARNING DRV_NAME
6208 "Error calling pci_enable_device.\n");
6212 priv
= libipw_priv(dev
);
6214 pci_set_master(pci_dev
);
6215 pci_set_drvdata(pci_dev
, priv
);
6217 err
= pci_set_dma_mask(pci_dev
, DMA_BIT_MASK(32));
6219 printk(KERN_WARNING DRV_NAME
6220 "Error calling pci_set_dma_mask.\n");
6221 pci_disable_device(pci_dev
);
6225 err
= pci_request_regions(pci_dev
, DRV_NAME
);
6227 printk(KERN_WARNING DRV_NAME
6228 "Error calling pci_request_regions.\n");
6229 pci_disable_device(pci_dev
);
6233 /* We disable the RETRY_TIMEOUT register (0x41) to keep
6234 * PCI Tx retries from interfering with C3 CPU state */
6235 pci_read_config_dword(pci_dev
, 0x40, &val
);
6236 if ((val
& 0x0000ff00) != 0)
6237 pci_write_config_dword(pci_dev
, 0x40, val
& 0xffff00ff);
6239 if (!ipw2100_hw_is_adapter_in_system(dev
)) {
6240 printk(KERN_WARNING DRV_NAME
6241 "Device not found via register read.\n");
6246 SET_NETDEV_DEV(dev
, &pci_dev
->dev
);
6248 /* Force interrupts to be shut off on the device */
6249 priv
->status
|= STATUS_INT_ENABLED
;
6250 ipw2100_disable_interrupts(priv
);
6252 /* Allocate and initialize the Tx/Rx queues and lists */
6253 if (ipw2100_queues_allocate(priv
)) {
6254 printk(KERN_WARNING DRV_NAME
6255 "Error calling ipw2100_queues_allocate.\n");
6259 ipw2100_queues_initialize(priv
);
6261 err
= request_irq(pci_dev
->irq
,
6262 ipw2100_interrupt
, IRQF_SHARED
, dev
->name
, priv
);
6264 printk(KERN_WARNING DRV_NAME
6265 "Error calling request_irq: %d.\n", pci_dev
->irq
);
6268 dev
->irq
= pci_dev
->irq
;
6270 IPW_DEBUG_INFO("Attempting to register device...\n");
6272 printk(KERN_INFO DRV_NAME
6273 ": Detected Intel PRO/Wireless 2100 Network Connection\n");
6275 err
= ipw2100_up(priv
, 1);
6279 err
= ipw2100_wdev_init(dev
);
6284 /* Bring up the interface. Pre 0.46, after we registered the
6285 * network device we would call ipw2100_up. This introduced a race
6286 * condition with newer hotplug configurations (network was coming
6287 * up and making calls before the device was initialized).
6289 err
= register_netdev(dev
);
6291 printk(KERN_WARNING DRV_NAME
6292 "Error calling register_netdev.\n");
6297 mutex_lock(&priv
->action_mutex
);
6299 IPW_DEBUG_INFO("%s: Bound to %s\n", dev
->name
, pci_name(pci_dev
));
6301 /* perform this after register_netdev so that dev->name is set */
6302 err
= sysfs_create_group(&pci_dev
->dev
.kobj
, &ipw2100_attribute_group
);
6306 /* If the RF Kill switch is disabled, go ahead and complete the
6307 * startup sequence */
6308 if (!(priv
->status
& STATUS_RF_KILL_MASK
)) {
6309 /* Enable the adapter - sends HOST_COMPLETE */
6310 if (ipw2100_enable_adapter(priv
)) {
6311 printk(KERN_WARNING DRV_NAME
6312 ": %s: failed in call to enable adapter.\n",
6313 priv
->net_dev
->name
);
6314 ipw2100_hw_stop_adapter(priv
);
6319 /* Start a scan . . . */
6320 ipw2100_set_scan_options(priv
);
6321 ipw2100_start_scan(priv
);
6324 IPW_DEBUG_INFO("exit\n");
6326 priv
->status
|= STATUS_INITIALIZED
;
6328 mutex_unlock(&priv
->action_mutex
);
6333 mutex_unlock(&priv
->action_mutex
);
6336 if (registered
>= 2)
6337 unregister_netdev(dev
);
6340 wiphy_unregister(priv
->ieee
->wdev
.wiphy
);
6341 kfree(priv
->ieee
->bg_band
.channels
);
6344 ipw2100_hw_stop_adapter(priv
);
6346 ipw2100_disable_interrupts(priv
);
6349 free_irq(dev
->irq
, priv
);
6351 ipw2100_kill_works(priv
);
6353 /* These are safe to call even if they weren't allocated */
6354 ipw2100_queues_free(priv
);
6355 sysfs_remove_group(&pci_dev
->dev
.kobj
,
6356 &ipw2100_attribute_group
);
6358 free_libipw(dev
, 0);
6361 pci_iounmap(pci_dev
, ioaddr
);
6363 pci_release_regions(pci_dev
);
6364 pci_disable_device(pci_dev
);
6368 static void ipw2100_pci_remove_one(struct pci_dev
*pci_dev
)
6370 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6371 struct net_device
*dev
= priv
->net_dev
;
6373 mutex_lock(&priv
->action_mutex
);
6375 priv
->status
&= ~STATUS_INITIALIZED
;
6377 sysfs_remove_group(&pci_dev
->dev
.kobj
, &ipw2100_attribute_group
);
6380 if (ipw2100_firmware
.version
)
6381 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
6383 /* Take down the hardware */
6386 /* Release the mutex so that the network subsystem can
6387 * complete any needed calls into the driver... */
6388 mutex_unlock(&priv
->action_mutex
);
6390 /* Unregister the device first - this results in close()
6391 * being called if the device is open. If we free storage
6392 * first, then close() will crash.
6393 * FIXME: remove the comment above. */
6394 unregister_netdev(dev
);
6396 ipw2100_kill_works(priv
);
6398 ipw2100_queues_free(priv
);
6400 /* Free potential debugging firmware snapshot */
6401 ipw2100_snapshot_free(priv
);
6403 free_irq(dev
->irq
, priv
);
6405 pci_iounmap(pci_dev
, priv
->ioaddr
);
6407 /* wiphy_unregister needs to be here, before free_libipw */
6408 wiphy_unregister(priv
->ieee
->wdev
.wiphy
);
6409 kfree(priv
->ieee
->bg_band
.channels
);
6410 free_libipw(dev
, 0);
6412 pci_release_regions(pci_dev
);
6413 pci_disable_device(pci_dev
);
6415 IPW_DEBUG_INFO("exit\n");
6419 static int ipw2100_suspend(struct pci_dev
*pci_dev
, pm_message_t state
)
6421 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6422 struct net_device
*dev
= priv
->net_dev
;
6424 IPW_DEBUG_INFO("%s: Going into suspend...\n", dev
->name
);
6426 mutex_lock(&priv
->action_mutex
);
6427 if (priv
->status
& STATUS_INITIALIZED
) {
6428 /* Take down the device; powers it off, etc. */
6432 /* Remove the PRESENT state of the device */
6433 netif_device_detach(dev
);
6435 pci_save_state(pci_dev
);
6436 pci_disable_device(pci_dev
);
6437 pci_set_power_state(pci_dev
, PCI_D3hot
);
6439 priv
->suspend_at
= get_seconds();
6441 mutex_unlock(&priv
->action_mutex
);
6446 static int ipw2100_resume(struct pci_dev
*pci_dev
)
6448 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6449 struct net_device
*dev
= priv
->net_dev
;
6453 if (IPW2100_PM_DISABLED
)
6456 mutex_lock(&priv
->action_mutex
);
6458 IPW_DEBUG_INFO("%s: Coming out of suspend...\n", dev
->name
);
6460 pci_set_power_state(pci_dev
, PCI_D0
);
6461 err
= pci_enable_device(pci_dev
);
6463 printk(KERN_ERR
"%s: pci_enable_device failed on resume\n",
6465 mutex_unlock(&priv
->action_mutex
);
6468 pci_restore_state(pci_dev
);
6471 * Suspend/Resume resets the PCI configuration space, so we have to
6472 * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
6473 * from interfering with C3 CPU state. pci_restore_state won't help
6474 * here since it only restores the first 64 bytes pci config header.
6476 pci_read_config_dword(pci_dev
, 0x40, &val
);
6477 if ((val
& 0x0000ff00) != 0)
6478 pci_write_config_dword(pci_dev
, 0x40, val
& 0xffff00ff);
6480 /* Set the device back into the PRESENT state; this will also wake
6481 * the queue of needed */
6482 netif_device_attach(dev
);
6484 priv
->suspend_time
= get_seconds() - priv
->suspend_at
;
6486 /* Bring the device back up */
6487 if (!(priv
->status
& STATUS_RF_KILL_SW
))
6488 ipw2100_up(priv
, 0);
6490 mutex_unlock(&priv
->action_mutex
);
6496 static void ipw2100_shutdown(struct pci_dev
*pci_dev
)
6498 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6500 /* Take down the device; powers it off, etc. */
6503 pci_disable_device(pci_dev
);
6506 #define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
6508 static const struct pci_device_id ipw2100_pci_id_table
[] = {
6509 IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */
6510 IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */
6511 IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */
6512 IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */
6513 IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */
6514 IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */
6515 IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */
6516 IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */
6517 IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */
6518 IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */
6519 IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */
6520 IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */
6521 IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */
6523 IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */
6524 IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */
6525 IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */
6526 IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */
6527 IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */
6529 IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */
6530 IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */
6531 IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */
6532 IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */
6533 IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */
6534 IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */
6535 IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */
6537 IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */
6539 IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */
6540 IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */
6541 IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */
6542 IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */
6543 IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */
6544 IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */
6545 IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */
6547 IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */
6548 IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */
6549 IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */
6550 IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */
6551 IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */
6552 IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */
6554 IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */
6558 MODULE_DEVICE_TABLE(pci
, ipw2100_pci_id_table
);
6560 static struct pci_driver ipw2100_pci_driver
= {
6562 .id_table
= ipw2100_pci_id_table
,
6563 .probe
= ipw2100_pci_init_one
,
6564 .remove
= ipw2100_pci_remove_one
,
6566 .suspend
= ipw2100_suspend
,
6567 .resume
= ipw2100_resume
,
6569 .shutdown
= ipw2100_shutdown
,
6573 * Initialize the ipw2100 driver/module
6575 * @returns 0 if ok, < 0 errno node con error.
6577 * Note: we cannot init the /proc stuff until the PCI driver is there,
6578 * or we risk an unlikely race condition on someone accessing
6579 * uninitialized data in the PCI dev struct through /proc.
6581 static int __init
ipw2100_init(void)
6585 printk(KERN_INFO DRV_NAME
": %s, %s\n", DRV_DESCRIPTION
, DRV_VERSION
);
6586 printk(KERN_INFO DRV_NAME
": %s\n", DRV_COPYRIGHT
);
6588 pm_qos_add_request(&ipw2100_pm_qos_req
, PM_QOS_CPU_DMA_LATENCY
,
6589 PM_QOS_DEFAULT_VALUE
);
6591 ret
= pci_register_driver(&ipw2100_pci_driver
);
6595 #ifdef CONFIG_IPW2100_DEBUG
6596 ipw2100_debug_level
= debug
;
6597 ret
= driver_create_file(&ipw2100_pci_driver
.driver
,
6598 &driver_attr_debug_level
);
6606 * Cleanup ipw2100 driver registration
6608 static void __exit
ipw2100_exit(void)
6610 /* FIXME: IPG: check that we have no instances of the devices open */
6611 #ifdef CONFIG_IPW2100_DEBUG
6612 driver_remove_file(&ipw2100_pci_driver
.driver
,
6613 &driver_attr_debug_level
);
6615 pci_unregister_driver(&ipw2100_pci_driver
);
6616 pm_qos_remove_request(&ipw2100_pm_qos_req
);
6619 module_init(ipw2100_init
);
6620 module_exit(ipw2100_exit
);
6622 static int ipw2100_wx_get_name(struct net_device
*dev
,
6623 struct iw_request_info
*info
,
6624 union iwreq_data
*wrqu
, char *extra
)
6627 * This can be called at any time. No action lock required
6630 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6631 if (!(priv
->status
& STATUS_ASSOCIATED
))
6632 strcpy(wrqu
->name
, "unassociated");
6634 snprintf(wrqu
->name
, IFNAMSIZ
, "IEEE 802.11b");
6636 IPW_DEBUG_WX("Name: %s\n", wrqu
->name
);
6640 static int ipw2100_wx_set_freq(struct net_device
*dev
,
6641 struct iw_request_info
*info
,
6642 union iwreq_data
*wrqu
, char *extra
)
6644 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6645 struct iw_freq
*fwrq
= &wrqu
->freq
;
6648 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
)
6651 mutex_lock(&priv
->action_mutex
);
6652 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6657 /* if setting by freq convert to channel */
6659 if ((fwrq
->m
>= (int)2.412e8
&& fwrq
->m
<= (int)2.487e8
)) {
6660 int f
= fwrq
->m
/ 100000;
6663 while ((c
< REG_MAX_CHANNEL
) &&
6664 (f
!= ipw2100_frequencies
[c
]))
6667 /* hack to fall through */
6673 if (fwrq
->e
> 0 || fwrq
->m
> 1000) {
6676 } else { /* Set the channel */
6677 IPW_DEBUG_WX("SET Freq/Channel -> %d\n", fwrq
->m
);
6678 err
= ipw2100_set_channel(priv
, fwrq
->m
, 0);
6682 mutex_unlock(&priv
->action_mutex
);
6686 static int ipw2100_wx_get_freq(struct net_device
*dev
,
6687 struct iw_request_info
*info
,
6688 union iwreq_data
*wrqu
, char *extra
)
6691 * This can be called at any time. No action lock required
6694 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6698 /* If we are associated, trying to associate, or have a statically
6699 * configured CHANNEL then return that; otherwise return ANY */
6700 if (priv
->config
& CFG_STATIC_CHANNEL
||
6701 priv
->status
& STATUS_ASSOCIATED
)
6702 wrqu
->freq
.m
= priv
->channel
;
6706 IPW_DEBUG_WX("GET Freq/Channel -> %d\n", priv
->channel
);
6711 static int ipw2100_wx_set_mode(struct net_device
*dev
,
6712 struct iw_request_info
*info
,
6713 union iwreq_data
*wrqu
, char *extra
)
6715 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6718 IPW_DEBUG_WX("SET Mode -> %d\n", wrqu
->mode
);
6720 if (wrqu
->mode
== priv
->ieee
->iw_mode
)
6723 mutex_lock(&priv
->action_mutex
);
6724 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6729 switch (wrqu
->mode
) {
6730 #ifdef CONFIG_IPW2100_MONITOR
6731 case IW_MODE_MONITOR
:
6732 err
= ipw2100_switch_mode(priv
, IW_MODE_MONITOR
);
6734 #endif /* CONFIG_IPW2100_MONITOR */
6736 err
= ipw2100_switch_mode(priv
, IW_MODE_ADHOC
);
6741 err
= ipw2100_switch_mode(priv
, IW_MODE_INFRA
);
6746 mutex_unlock(&priv
->action_mutex
);
6750 static int ipw2100_wx_get_mode(struct net_device
*dev
,
6751 struct iw_request_info
*info
,
6752 union iwreq_data
*wrqu
, char *extra
)
6755 * This can be called at any time. No action lock required
6758 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6760 wrqu
->mode
= priv
->ieee
->iw_mode
;
6761 IPW_DEBUG_WX("GET Mode -> %d\n", wrqu
->mode
);
6766 #define POWER_MODES 5
6768 /* Values are in microsecond */
6769 static const s32 timeout_duration
[POWER_MODES
] = {
6777 static const s32 period_duration
[POWER_MODES
] = {
6785 static int ipw2100_wx_get_range(struct net_device
*dev
,
6786 struct iw_request_info
*info
,
6787 union iwreq_data
*wrqu
, char *extra
)
6790 * This can be called at any time. No action lock required
6793 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6794 struct iw_range
*range
= (struct iw_range
*)extra
;
6798 wrqu
->data
.length
= sizeof(*range
);
6799 memset(range
, 0, sizeof(*range
));
6801 /* Let's try to keep this struct in the same order as in
6802 * linux/include/wireless.h
6805 /* TODO: See what values we can set, and remove the ones we can't
6806 * set, or fill them with some default data.
6809 /* ~5 Mb/s real (802.11b) */
6810 range
->throughput
= 5 * 1000 * 1000;
6812 // range->sensitivity; /* signal level threshold range */
6814 range
->max_qual
.qual
= 100;
6815 /* TODO: Find real max RSSI and stick here */
6816 range
->max_qual
.level
= 0;
6817 range
->max_qual
.noise
= 0;
6818 range
->max_qual
.updated
= 7; /* Updated all three */
6820 range
->avg_qual
.qual
= 70; /* > 8% missed beacons is 'bad' */
6821 /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
6822 range
->avg_qual
.level
= 20 + IPW2100_RSSI_TO_DBM
;
6823 range
->avg_qual
.noise
= 0;
6824 range
->avg_qual
.updated
= 7; /* Updated all three */
6826 range
->num_bitrates
= RATE_COUNT
;
6828 for (i
= 0; i
< RATE_COUNT
&& i
< IW_MAX_BITRATES
; i
++) {
6829 range
->bitrate
[i
] = ipw2100_bg_rates
[i
].bitrate
* 100 * 1000;
6832 range
->min_rts
= MIN_RTS_THRESHOLD
;
6833 range
->max_rts
= MAX_RTS_THRESHOLD
;
6834 range
->min_frag
= MIN_FRAG_THRESHOLD
;
6835 range
->max_frag
= MAX_FRAG_THRESHOLD
;
6837 range
->min_pmp
= period_duration
[0]; /* Minimal PM period */
6838 range
->max_pmp
= period_duration
[POWER_MODES
- 1]; /* Maximal PM period */
6839 range
->min_pmt
= timeout_duration
[POWER_MODES
- 1]; /* Minimal PM timeout */
6840 range
->max_pmt
= timeout_duration
[0]; /* Maximal PM timeout */
6842 /* How to decode max/min PM period */
6843 range
->pmp_flags
= IW_POWER_PERIOD
;
6844 /* How to decode max/min PM period */
6845 range
->pmt_flags
= IW_POWER_TIMEOUT
;
6846 /* What PM options are supported */
6847 range
->pm_capa
= IW_POWER_TIMEOUT
| IW_POWER_PERIOD
;
6849 range
->encoding_size
[0] = 5;
6850 range
->encoding_size
[1] = 13; /* Different token sizes */
6851 range
->num_encoding_sizes
= 2; /* Number of entry in the list */
6852 range
->max_encoding_tokens
= WEP_KEYS
; /* Max number of tokens */
6853 // range->encoding_login_index; /* token index for login token */
6855 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
6856 range
->txpower_capa
= IW_TXPOW_DBM
;
6857 range
->num_txpower
= IW_MAX_TXPOWER
;
6858 for (i
= 0, level
= (IPW_TX_POWER_MAX_DBM
* 16);
6861 ((IPW_TX_POWER_MAX_DBM
-
6862 IPW_TX_POWER_MIN_DBM
) * 16) / (IW_MAX_TXPOWER
- 1))
6863 range
->txpower
[i
] = level
/ 16;
6865 range
->txpower_capa
= 0;
6866 range
->num_txpower
= 0;
6869 /* Set the Wireless Extension versions */
6870 range
->we_version_compiled
= WIRELESS_EXT
;
6871 range
->we_version_source
= 18;
6873 // range->retry_capa; /* What retry options are supported */
6874 // range->retry_flags; /* How to decode max/min retry limit */
6875 // range->r_time_flags; /* How to decode max/min retry life */
6876 // range->min_retry; /* Minimal number of retries */
6877 // range->max_retry; /* Maximal number of retries */
6878 // range->min_r_time; /* Minimal retry lifetime */
6879 // range->max_r_time; /* Maximal retry lifetime */
6881 range
->num_channels
= FREQ_COUNT
;
6884 for (i
= 0; i
< FREQ_COUNT
; i
++) {
6885 // TODO: Include only legal frequencies for some countries
6886 // if (local->channel_mask & (1 << i)) {
6887 range
->freq
[val
].i
= i
+ 1;
6888 range
->freq
[val
].m
= ipw2100_frequencies
[i
] * 100000;
6889 range
->freq
[val
].e
= 1;
6892 if (val
== IW_MAX_FREQUENCIES
)
6895 range
->num_frequency
= val
;
6897 /* Event capability (kernel + driver) */
6898 range
->event_capa
[0] = (IW_EVENT_CAPA_K_0
|
6899 IW_EVENT_CAPA_MASK(SIOCGIWAP
));
6900 range
->event_capa
[1] = IW_EVENT_CAPA_K_1
;
6902 range
->enc_capa
= IW_ENC_CAPA_WPA
| IW_ENC_CAPA_WPA2
|
6903 IW_ENC_CAPA_CIPHER_TKIP
| IW_ENC_CAPA_CIPHER_CCMP
;
6905 IPW_DEBUG_WX("GET Range\n");
6910 static int ipw2100_wx_set_wap(struct net_device
*dev
,
6911 struct iw_request_info
*info
,
6912 union iwreq_data
*wrqu
, char *extra
)
6914 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6918 if (wrqu
->ap_addr
.sa_family
!= ARPHRD_ETHER
)
6921 mutex_lock(&priv
->action_mutex
);
6922 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6927 if (is_broadcast_ether_addr(wrqu
->ap_addr
.sa_data
) ||
6928 is_zero_ether_addr(wrqu
->ap_addr
.sa_data
)) {
6929 /* we disable mandatory BSSID association */
6930 IPW_DEBUG_WX("exit - disable mandatory BSSID\n");
6931 priv
->config
&= ~CFG_STATIC_BSSID
;
6932 err
= ipw2100_set_mandatory_bssid(priv
, NULL
, 0);
6936 priv
->config
|= CFG_STATIC_BSSID
;
6937 memcpy(priv
->mandatory_bssid_mac
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
);
6939 err
= ipw2100_set_mandatory_bssid(priv
, wrqu
->ap_addr
.sa_data
, 0);
6941 IPW_DEBUG_WX("SET BSSID -> %pM\n", wrqu
->ap_addr
.sa_data
);
6944 mutex_unlock(&priv
->action_mutex
);
6948 static int ipw2100_wx_get_wap(struct net_device
*dev
,
6949 struct iw_request_info
*info
,
6950 union iwreq_data
*wrqu
, char *extra
)
6953 * This can be called at any time. No action lock required
6956 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6958 /* If we are associated, trying to associate, or have a statically
6959 * configured BSSID then return that; otherwise return ANY */
6960 if (priv
->config
& CFG_STATIC_BSSID
|| priv
->status
& STATUS_ASSOCIATED
) {
6961 wrqu
->ap_addr
.sa_family
= ARPHRD_ETHER
;
6962 memcpy(wrqu
->ap_addr
.sa_data
, priv
->bssid
, ETH_ALEN
);
6964 eth_zero_addr(wrqu
->ap_addr
.sa_data
);
6966 IPW_DEBUG_WX("Getting WAP BSSID: %pM\n", wrqu
->ap_addr
.sa_data
);
6970 static int ipw2100_wx_set_essid(struct net_device
*dev
,
6971 struct iw_request_info
*info
,
6972 union iwreq_data
*wrqu
, char *extra
)
6974 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6975 char *essid
= ""; /* ANY */
6979 mutex_lock(&priv
->action_mutex
);
6980 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6985 if (wrqu
->essid
.flags
&& wrqu
->essid
.length
) {
6986 length
= wrqu
->essid
.length
;
6991 IPW_DEBUG_WX("Setting ESSID to ANY\n");
6992 priv
->config
&= ~CFG_STATIC_ESSID
;
6993 err
= ipw2100_set_essid(priv
, NULL
, 0, 0);
6997 length
= min(length
, IW_ESSID_MAX_SIZE
);
6999 priv
->config
|= CFG_STATIC_ESSID
;
7001 if (priv
->essid_len
== length
&& !memcmp(priv
->essid
, extra
, length
)) {
7002 IPW_DEBUG_WX("ESSID set to current ESSID.\n");
7007 IPW_DEBUG_WX("Setting ESSID: '%*pE' (%d)\n", length
, essid
, length
);
7009 priv
->essid_len
= length
;
7010 memcpy(priv
->essid
, essid
, priv
->essid_len
);
7012 err
= ipw2100_set_essid(priv
, essid
, length
, 0);
7015 mutex_unlock(&priv
->action_mutex
);
7019 static int ipw2100_wx_get_essid(struct net_device
*dev
,
7020 struct iw_request_info
*info
,
7021 union iwreq_data
*wrqu
, char *extra
)
7024 * This can be called at any time. No action lock required
7027 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7029 /* If we are associated, trying to associate, or have a statically
7030 * configured ESSID then return that; otherwise return ANY */
7031 if (priv
->config
& CFG_STATIC_ESSID
|| priv
->status
& STATUS_ASSOCIATED
) {
7032 IPW_DEBUG_WX("Getting essid: '%*pE'\n",
7033 priv
->essid_len
, priv
->essid
);
7034 memcpy(extra
, priv
->essid
, priv
->essid_len
);
7035 wrqu
->essid
.length
= priv
->essid_len
;
7036 wrqu
->essid
.flags
= 1; /* active */
7038 IPW_DEBUG_WX("Getting essid: ANY\n");
7039 wrqu
->essid
.length
= 0;
7040 wrqu
->essid
.flags
= 0; /* active */
7046 static int ipw2100_wx_set_nick(struct net_device
*dev
,
7047 struct iw_request_info
*info
,
7048 union iwreq_data
*wrqu
, char *extra
)
7051 * This can be called at any time. No action lock required
7054 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7056 if (wrqu
->data
.length
> IW_ESSID_MAX_SIZE
)
7059 wrqu
->data
.length
= min_t(size_t, wrqu
->data
.length
, sizeof(priv
->nick
));
7060 memset(priv
->nick
, 0, sizeof(priv
->nick
));
7061 memcpy(priv
->nick
, extra
, wrqu
->data
.length
);
7063 IPW_DEBUG_WX("SET Nickname -> %s\n", priv
->nick
);
7068 static int ipw2100_wx_get_nick(struct net_device
*dev
,
7069 struct iw_request_info
*info
,
7070 union iwreq_data
*wrqu
, char *extra
)
7073 * This can be called at any time. No action lock required
7076 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7078 wrqu
->data
.length
= strlen(priv
->nick
);
7079 memcpy(extra
, priv
->nick
, wrqu
->data
.length
);
7080 wrqu
->data
.flags
= 1; /* active */
7082 IPW_DEBUG_WX("GET Nickname -> %s\n", extra
);
7087 static int ipw2100_wx_set_rate(struct net_device
*dev
,
7088 struct iw_request_info
*info
,
7089 union iwreq_data
*wrqu
, char *extra
)
7091 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7092 u32 target_rate
= wrqu
->bitrate
.value
;
7096 mutex_lock(&priv
->action_mutex
);
7097 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7104 if (target_rate
== 1000000 ||
7105 (!wrqu
->bitrate
.fixed
&& target_rate
> 1000000))
7106 rate
|= TX_RATE_1_MBIT
;
7107 if (target_rate
== 2000000 ||
7108 (!wrqu
->bitrate
.fixed
&& target_rate
> 2000000))
7109 rate
|= TX_RATE_2_MBIT
;
7110 if (target_rate
== 5500000 ||
7111 (!wrqu
->bitrate
.fixed
&& target_rate
> 5500000))
7112 rate
|= TX_RATE_5_5_MBIT
;
7113 if (target_rate
== 11000000 ||
7114 (!wrqu
->bitrate
.fixed
&& target_rate
> 11000000))
7115 rate
|= TX_RATE_11_MBIT
;
7117 rate
= DEFAULT_TX_RATES
;
7119 err
= ipw2100_set_tx_rates(priv
, rate
, 0);
7121 IPW_DEBUG_WX("SET Rate -> %04X\n", rate
);
7123 mutex_unlock(&priv
->action_mutex
);
7127 static int ipw2100_wx_get_rate(struct net_device
*dev
,
7128 struct iw_request_info
*info
,
7129 union iwreq_data
*wrqu
, char *extra
)
7131 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7133 unsigned int len
= sizeof(val
);
7136 if (!(priv
->status
& STATUS_ENABLED
) ||
7137 priv
->status
& STATUS_RF_KILL_MASK
||
7138 !(priv
->status
& STATUS_ASSOCIATED
)) {
7139 wrqu
->bitrate
.value
= 0;
7143 mutex_lock(&priv
->action_mutex
);
7144 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7149 err
= ipw2100_get_ordinal(priv
, IPW_ORD_CURRENT_TX_RATE
, &val
, &len
);
7151 IPW_DEBUG_WX("failed querying ordinals.\n");
7155 switch (val
& TX_RATE_MASK
) {
7156 case TX_RATE_1_MBIT
:
7157 wrqu
->bitrate
.value
= 1000000;
7159 case TX_RATE_2_MBIT
:
7160 wrqu
->bitrate
.value
= 2000000;
7162 case TX_RATE_5_5_MBIT
:
7163 wrqu
->bitrate
.value
= 5500000;
7165 case TX_RATE_11_MBIT
:
7166 wrqu
->bitrate
.value
= 11000000;
7169 wrqu
->bitrate
.value
= 0;
7172 IPW_DEBUG_WX("GET Rate -> %d\n", wrqu
->bitrate
.value
);
7175 mutex_unlock(&priv
->action_mutex
);
7179 static int ipw2100_wx_set_rts(struct net_device
*dev
,
7180 struct iw_request_info
*info
,
7181 union iwreq_data
*wrqu
, char *extra
)
7183 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7186 /* Auto RTS not yet supported */
7187 if (wrqu
->rts
.fixed
== 0)
7190 mutex_lock(&priv
->action_mutex
);
7191 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7196 if (wrqu
->rts
.disabled
)
7197 value
= priv
->rts_threshold
| RTS_DISABLED
;
7199 if (wrqu
->rts
.value
< 1 || wrqu
->rts
.value
> 2304) {
7203 value
= wrqu
->rts
.value
;
7206 err
= ipw2100_set_rts_threshold(priv
, value
);
7208 IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X\n", value
);
7210 mutex_unlock(&priv
->action_mutex
);
7214 static int ipw2100_wx_get_rts(struct net_device
*dev
,
7215 struct iw_request_info
*info
,
7216 union iwreq_data
*wrqu
, char *extra
)
7219 * This can be called at any time. No action lock required
7222 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7224 wrqu
->rts
.value
= priv
->rts_threshold
& ~RTS_DISABLED
;
7225 wrqu
->rts
.fixed
= 1; /* no auto select */
7227 /* If RTS is set to the default value, then it is disabled */
7228 wrqu
->rts
.disabled
= (priv
->rts_threshold
& RTS_DISABLED
) ? 1 : 0;
7230 IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X\n", wrqu
->rts
.value
);
7235 static int ipw2100_wx_set_txpow(struct net_device
*dev
,
7236 struct iw_request_info
*info
,
7237 union iwreq_data
*wrqu
, char *extra
)
7239 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7242 if (ipw_radio_kill_sw(priv
, wrqu
->txpower
.disabled
))
7243 return -EINPROGRESS
;
7245 if (priv
->ieee
->iw_mode
!= IW_MODE_ADHOC
)
7248 if ((wrqu
->txpower
.flags
& IW_TXPOW_TYPE
) != IW_TXPOW_DBM
)
7251 if (wrqu
->txpower
.fixed
== 0)
7252 value
= IPW_TX_POWER_DEFAULT
;
7254 if (wrqu
->txpower
.value
< IPW_TX_POWER_MIN_DBM
||
7255 wrqu
->txpower
.value
> IPW_TX_POWER_MAX_DBM
)
7258 value
= wrqu
->txpower
.value
;
7261 mutex_lock(&priv
->action_mutex
);
7262 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7267 err
= ipw2100_set_tx_power(priv
, value
);
7269 IPW_DEBUG_WX("SET TX Power -> %d\n", value
);
7272 mutex_unlock(&priv
->action_mutex
);
7276 static int ipw2100_wx_get_txpow(struct net_device
*dev
,
7277 struct iw_request_info
*info
,
7278 union iwreq_data
*wrqu
, char *extra
)
7281 * This can be called at any time. No action lock required
7284 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7286 wrqu
->txpower
.disabled
= (priv
->status
& STATUS_RF_KILL_MASK
) ? 1 : 0;
7288 if (priv
->tx_power
== IPW_TX_POWER_DEFAULT
) {
7289 wrqu
->txpower
.fixed
= 0;
7290 wrqu
->txpower
.value
= IPW_TX_POWER_MAX_DBM
;
7292 wrqu
->txpower
.fixed
= 1;
7293 wrqu
->txpower
.value
= priv
->tx_power
;
7296 wrqu
->txpower
.flags
= IW_TXPOW_DBM
;
7298 IPW_DEBUG_WX("GET TX Power -> %d\n", wrqu
->txpower
.value
);
7303 static int ipw2100_wx_set_frag(struct net_device
*dev
,
7304 struct iw_request_info
*info
,
7305 union iwreq_data
*wrqu
, char *extra
)
7308 * This can be called at any time. No action lock required
7311 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7313 if (!wrqu
->frag
.fixed
)
7316 if (wrqu
->frag
.disabled
) {
7317 priv
->frag_threshold
|= FRAG_DISABLED
;
7318 priv
->ieee
->fts
= DEFAULT_FTS
;
7320 if (wrqu
->frag
.value
< MIN_FRAG_THRESHOLD
||
7321 wrqu
->frag
.value
> MAX_FRAG_THRESHOLD
)
7324 priv
->ieee
->fts
= wrqu
->frag
.value
& ~0x1;
7325 priv
->frag_threshold
= priv
->ieee
->fts
;
7328 IPW_DEBUG_WX("SET Frag Threshold -> %d\n", priv
->ieee
->fts
);
7333 static int ipw2100_wx_get_frag(struct net_device
*dev
,
7334 struct iw_request_info
*info
,
7335 union iwreq_data
*wrqu
, char *extra
)
7338 * This can be called at any time. No action lock required
7341 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7342 wrqu
->frag
.value
= priv
->frag_threshold
& ~FRAG_DISABLED
;
7343 wrqu
->frag
.fixed
= 0; /* no auto select */
7344 wrqu
->frag
.disabled
= (priv
->frag_threshold
& FRAG_DISABLED
) ? 1 : 0;
7346 IPW_DEBUG_WX("GET Frag Threshold -> %d\n", wrqu
->frag
.value
);
7351 static int ipw2100_wx_set_retry(struct net_device
*dev
,
7352 struct iw_request_info
*info
,
7353 union iwreq_data
*wrqu
, char *extra
)
7355 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7358 if (wrqu
->retry
.flags
& IW_RETRY_LIFETIME
|| wrqu
->retry
.disabled
)
7361 if (!(wrqu
->retry
.flags
& IW_RETRY_LIMIT
))
7364 mutex_lock(&priv
->action_mutex
);
7365 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7370 if (wrqu
->retry
.flags
& IW_RETRY_SHORT
) {
7371 err
= ipw2100_set_short_retry(priv
, wrqu
->retry
.value
);
7372 IPW_DEBUG_WX("SET Short Retry Limit -> %d\n",
7377 if (wrqu
->retry
.flags
& IW_RETRY_LONG
) {
7378 err
= ipw2100_set_long_retry(priv
, wrqu
->retry
.value
);
7379 IPW_DEBUG_WX("SET Long Retry Limit -> %d\n",
7384 err
= ipw2100_set_short_retry(priv
, wrqu
->retry
.value
);
7386 err
= ipw2100_set_long_retry(priv
, wrqu
->retry
.value
);
7388 IPW_DEBUG_WX("SET Both Retry Limits -> %d\n", wrqu
->retry
.value
);
7391 mutex_unlock(&priv
->action_mutex
);
7395 static int ipw2100_wx_get_retry(struct net_device
*dev
,
7396 struct iw_request_info
*info
,
7397 union iwreq_data
*wrqu
, char *extra
)
7400 * This can be called at any time. No action lock required
7403 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7405 wrqu
->retry
.disabled
= 0; /* can't be disabled */
7407 if ((wrqu
->retry
.flags
& IW_RETRY_TYPE
) == IW_RETRY_LIFETIME
)
7410 if (wrqu
->retry
.flags
& IW_RETRY_LONG
) {
7411 wrqu
->retry
.flags
= IW_RETRY_LIMIT
| IW_RETRY_LONG
;
7412 wrqu
->retry
.value
= priv
->long_retry_limit
;
7415 (priv
->short_retry_limit
!=
7416 priv
->long_retry_limit
) ?
7417 IW_RETRY_LIMIT
| IW_RETRY_SHORT
: IW_RETRY_LIMIT
;
7419 wrqu
->retry
.value
= priv
->short_retry_limit
;
7422 IPW_DEBUG_WX("GET Retry -> %d\n", wrqu
->retry
.value
);
7427 static int ipw2100_wx_set_scan(struct net_device
*dev
,
7428 struct iw_request_info
*info
,
7429 union iwreq_data
*wrqu
, char *extra
)
7431 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7434 mutex_lock(&priv
->action_mutex
);
7435 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7440 IPW_DEBUG_WX("Initiating scan...\n");
7442 priv
->user_requested_scan
= 1;
7443 if (ipw2100_set_scan_options(priv
) || ipw2100_start_scan(priv
)) {
7444 IPW_DEBUG_WX("Start scan failed.\n");
7446 /* TODO: Mark a scan as pending so when hardware initialized
7451 mutex_unlock(&priv
->action_mutex
);
7455 static int ipw2100_wx_get_scan(struct net_device
*dev
,
7456 struct iw_request_info
*info
,
7457 union iwreq_data
*wrqu
, char *extra
)
7460 * This can be called at any time. No action lock required
7463 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7464 return libipw_wx_get_scan(priv
->ieee
, info
, wrqu
, extra
);
7468 * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c
7470 static int ipw2100_wx_set_encode(struct net_device
*dev
,
7471 struct iw_request_info
*info
,
7472 union iwreq_data
*wrqu
, char *key
)
7475 * No check of STATUS_INITIALIZED required
7478 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7479 return libipw_wx_set_encode(priv
->ieee
, info
, wrqu
, key
);
7482 static int ipw2100_wx_get_encode(struct net_device
*dev
,
7483 struct iw_request_info
*info
,
7484 union iwreq_data
*wrqu
, char *key
)
7487 * This can be called at any time. No action lock required
7490 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7491 return libipw_wx_get_encode(priv
->ieee
, info
, wrqu
, key
);
7494 static int ipw2100_wx_set_power(struct net_device
*dev
,
7495 struct iw_request_info
*info
,
7496 union iwreq_data
*wrqu
, char *extra
)
7498 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7501 mutex_lock(&priv
->action_mutex
);
7502 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7507 if (wrqu
->power
.disabled
) {
7508 priv
->power_mode
= IPW_POWER_LEVEL(priv
->power_mode
);
7509 err
= ipw2100_set_power_mode(priv
, IPW_POWER_MODE_CAM
);
7510 IPW_DEBUG_WX("SET Power Management Mode -> off\n");
7514 switch (wrqu
->power
.flags
& IW_POWER_MODE
) {
7515 case IW_POWER_ON
: /* If not specified */
7516 case IW_POWER_MODE
: /* If set all mask */
7517 case IW_POWER_ALL_R
: /* If explicitly state all */
7519 default: /* Otherwise we don't support it */
7520 IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
7526 /* If the user hasn't specified a power management mode yet, default
7528 priv
->power_mode
= IPW_POWER_ENABLED
| priv
->power_mode
;
7529 err
= ipw2100_set_power_mode(priv
, IPW_POWER_LEVEL(priv
->power_mode
));
7531 IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", priv
->power_mode
);
7534 mutex_unlock(&priv
->action_mutex
);
7539 static int ipw2100_wx_get_power(struct net_device
*dev
,
7540 struct iw_request_info
*info
,
7541 union iwreq_data
*wrqu
, char *extra
)
7544 * This can be called at any time. No action lock required
7547 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7549 if (!(priv
->power_mode
& IPW_POWER_ENABLED
))
7550 wrqu
->power
.disabled
= 1;
7552 wrqu
->power
.disabled
= 0;
7553 wrqu
->power
.flags
= 0;
7556 IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv
->power_mode
);
7566 static int ipw2100_wx_set_genie(struct net_device
*dev
,
7567 struct iw_request_info
*info
,
7568 union iwreq_data
*wrqu
, char *extra
)
7571 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7572 struct libipw_device
*ieee
= priv
->ieee
;
7575 if (!ieee
->wpa_enabled
)
7578 if (wrqu
->data
.length
> MAX_WPA_IE_LEN
||
7579 (wrqu
->data
.length
&& extra
== NULL
))
7582 if (wrqu
->data
.length
) {
7583 buf
= kmemdup(extra
, wrqu
->data
.length
, GFP_KERNEL
);
7587 kfree(ieee
->wpa_ie
);
7589 ieee
->wpa_ie_len
= wrqu
->data
.length
;
7591 kfree(ieee
->wpa_ie
);
7592 ieee
->wpa_ie
= NULL
;
7593 ieee
->wpa_ie_len
= 0;
7596 ipw2100_wpa_assoc_frame(priv
, ieee
->wpa_ie
, ieee
->wpa_ie_len
);
7602 static int ipw2100_wx_get_genie(struct net_device
*dev
,
7603 struct iw_request_info
*info
,
7604 union iwreq_data
*wrqu
, char *extra
)
7606 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7607 struct libipw_device
*ieee
= priv
->ieee
;
7609 if (ieee
->wpa_ie_len
== 0 || ieee
->wpa_ie
== NULL
) {
7610 wrqu
->data
.length
= 0;
7614 if (wrqu
->data
.length
< ieee
->wpa_ie_len
)
7617 wrqu
->data
.length
= ieee
->wpa_ie_len
;
7618 memcpy(extra
, ieee
->wpa_ie
, ieee
->wpa_ie_len
);
7624 static int ipw2100_wx_set_auth(struct net_device
*dev
,
7625 struct iw_request_info
*info
,
7626 union iwreq_data
*wrqu
, char *extra
)
7628 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7629 struct libipw_device
*ieee
= priv
->ieee
;
7630 struct iw_param
*param
= &wrqu
->param
;
7631 struct lib80211_crypt_data
*crypt
;
7632 unsigned long flags
;
7635 switch (param
->flags
& IW_AUTH_INDEX
) {
7636 case IW_AUTH_WPA_VERSION
:
7637 case IW_AUTH_CIPHER_PAIRWISE
:
7638 case IW_AUTH_CIPHER_GROUP
:
7639 case IW_AUTH_KEY_MGMT
:
7641 * ipw2200 does not use these parameters
7645 case IW_AUTH_TKIP_COUNTERMEASURES
:
7646 crypt
= priv
->ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
];
7647 if (!crypt
|| !crypt
->ops
->set_flags
|| !crypt
->ops
->get_flags
)
7650 flags
= crypt
->ops
->get_flags(crypt
->priv
);
7653 flags
|= IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
;
7655 flags
&= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
;
7657 crypt
->ops
->set_flags(flags
, crypt
->priv
);
7661 case IW_AUTH_DROP_UNENCRYPTED
:{
7664 * wpa_supplicant calls set_wpa_enabled when the driver
7665 * is loaded and unloaded, regardless of if WPA is being
7666 * used. No other calls are made which can be used to
7667 * determine if encryption will be used or not prior to
7668 * association being expected. If encryption is not being
7669 * used, drop_unencrypted is set to false, else true -- we
7670 * can use this to determine if the CAP_PRIVACY_ON bit should
7673 struct libipw_security sec
= {
7674 .flags
= SEC_ENABLED
,
7675 .enabled
= param
->value
,
7677 priv
->ieee
->drop_unencrypted
= param
->value
;
7678 /* We only change SEC_LEVEL for open mode. Others
7679 * are set by ipw_wpa_set_encryption.
7681 if (!param
->value
) {
7682 sec
.flags
|= SEC_LEVEL
;
7683 sec
.level
= SEC_LEVEL_0
;
7685 sec
.flags
|= SEC_LEVEL
;
7686 sec
.level
= SEC_LEVEL_1
;
7688 if (priv
->ieee
->set_security
)
7689 priv
->ieee
->set_security(priv
->ieee
->dev
, &sec
);
7693 case IW_AUTH_80211_AUTH_ALG
:
7694 ret
= ipw2100_wpa_set_auth_algs(priv
, param
->value
);
7697 case IW_AUTH_WPA_ENABLED
:
7698 ret
= ipw2100_wpa_enable(priv
, param
->value
);
7701 case IW_AUTH_RX_UNENCRYPTED_EAPOL
:
7702 ieee
->ieee802_1x
= param
->value
;
7705 //case IW_AUTH_ROAMING_CONTROL:
7706 case IW_AUTH_PRIVACY_INVOKED
:
7707 ieee
->privacy_invoked
= param
->value
;
7717 static int ipw2100_wx_get_auth(struct net_device
*dev
,
7718 struct iw_request_info
*info
,
7719 union iwreq_data
*wrqu
, char *extra
)
7721 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7722 struct libipw_device
*ieee
= priv
->ieee
;
7723 struct lib80211_crypt_data
*crypt
;
7724 struct iw_param
*param
= &wrqu
->param
;
7727 switch (param
->flags
& IW_AUTH_INDEX
) {
7728 case IW_AUTH_WPA_VERSION
:
7729 case IW_AUTH_CIPHER_PAIRWISE
:
7730 case IW_AUTH_CIPHER_GROUP
:
7731 case IW_AUTH_KEY_MGMT
:
7733 * wpa_supplicant will control these internally
7738 case IW_AUTH_TKIP_COUNTERMEASURES
:
7739 crypt
= priv
->ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
];
7740 if (!crypt
|| !crypt
->ops
->get_flags
) {
7741 IPW_DEBUG_WARNING("Can't get TKIP countermeasures: "
7742 "crypt not set!\n");
7746 param
->value
= (crypt
->ops
->get_flags(crypt
->priv
) &
7747 IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
) ? 1 : 0;
7751 case IW_AUTH_DROP_UNENCRYPTED
:
7752 param
->value
= ieee
->drop_unencrypted
;
7755 case IW_AUTH_80211_AUTH_ALG
:
7756 param
->value
= priv
->ieee
->sec
.auth_mode
;
7759 case IW_AUTH_WPA_ENABLED
:
7760 param
->value
= ieee
->wpa_enabled
;
7763 case IW_AUTH_RX_UNENCRYPTED_EAPOL
:
7764 param
->value
= ieee
->ieee802_1x
;
7767 case IW_AUTH_ROAMING_CONTROL
:
7768 case IW_AUTH_PRIVACY_INVOKED
:
7769 param
->value
= ieee
->privacy_invoked
;
7778 /* SIOCSIWENCODEEXT */
7779 static int ipw2100_wx_set_encodeext(struct net_device
*dev
,
7780 struct iw_request_info
*info
,
7781 union iwreq_data
*wrqu
, char *extra
)
7783 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7784 return libipw_wx_set_encodeext(priv
->ieee
, info
, wrqu
, extra
);
7787 /* SIOCGIWENCODEEXT */
7788 static int ipw2100_wx_get_encodeext(struct net_device
*dev
,
7789 struct iw_request_info
*info
,
7790 union iwreq_data
*wrqu
, char *extra
)
7792 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7793 return libipw_wx_get_encodeext(priv
->ieee
, info
, wrqu
, extra
);
7797 static int ipw2100_wx_set_mlme(struct net_device
*dev
,
7798 struct iw_request_info
*info
,
7799 union iwreq_data
*wrqu
, char *extra
)
7801 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7802 struct iw_mlme
*mlme
= (struct iw_mlme
*)extra
;
7805 reason
= cpu_to_le16(mlme
->reason_code
);
7807 switch (mlme
->cmd
) {
7808 case IW_MLME_DEAUTH
:
7812 case IW_MLME_DISASSOC
:
7813 ipw2100_disassociate_bssid(priv
);
7827 #ifdef CONFIG_IPW2100_MONITOR
7828 static int ipw2100_wx_set_promisc(struct net_device
*dev
,
7829 struct iw_request_info
*info
,
7830 union iwreq_data
*wrqu
, char *extra
)
7832 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7833 int *parms
= (int *)extra
;
7834 int enable
= (parms
[0] > 0);
7837 mutex_lock(&priv
->action_mutex
);
7838 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7844 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
7845 err
= ipw2100_set_channel(priv
, parms
[1], 0);
7848 priv
->channel
= parms
[1];
7849 err
= ipw2100_switch_mode(priv
, IW_MODE_MONITOR
);
7851 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
7852 err
= ipw2100_switch_mode(priv
, priv
->last_mode
);
7855 mutex_unlock(&priv
->action_mutex
);
7859 static int ipw2100_wx_reset(struct net_device
*dev
,
7860 struct iw_request_info
*info
,
7861 union iwreq_data
*wrqu
, char *extra
)
7863 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7864 if (priv
->status
& STATUS_INITIALIZED
)
7865 schedule_reset(priv
);
7871 static int ipw2100_wx_set_powermode(struct net_device
*dev
,
7872 struct iw_request_info
*info
,
7873 union iwreq_data
*wrqu
, char *extra
)
7875 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7876 int err
= 0, mode
= *(int *)extra
;
7878 mutex_lock(&priv
->action_mutex
);
7879 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7884 if ((mode
< 0) || (mode
> POWER_MODES
))
7885 mode
= IPW_POWER_AUTO
;
7887 if (IPW_POWER_LEVEL(priv
->power_mode
) != mode
)
7888 err
= ipw2100_set_power_mode(priv
, mode
);
7890 mutex_unlock(&priv
->action_mutex
);
7894 #define MAX_POWER_STRING 80
7895 static int ipw2100_wx_get_powermode(struct net_device
*dev
,
7896 struct iw_request_info
*info
,
7897 union iwreq_data
*wrqu
, char *extra
)
7900 * This can be called at any time. No action lock required
7903 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7904 int level
= IPW_POWER_LEVEL(priv
->power_mode
);
7905 s32 timeout
, period
;
7907 if (!(priv
->power_mode
& IPW_POWER_ENABLED
)) {
7908 snprintf(extra
, MAX_POWER_STRING
,
7909 "Power save level: %d (Off)", level
);
7912 case IPW_POWER_MODE_CAM
:
7913 snprintf(extra
, MAX_POWER_STRING
,
7914 "Power save level: %d (None)", level
);
7916 case IPW_POWER_AUTO
:
7917 snprintf(extra
, MAX_POWER_STRING
,
7918 "Power save level: %d (Auto)", level
);
7921 timeout
= timeout_duration
[level
- 1] / 1000;
7922 period
= period_duration
[level
- 1] / 1000;
7923 snprintf(extra
, MAX_POWER_STRING
,
7924 "Power save level: %d "
7925 "(Timeout %dms, Period %dms)",
7926 level
, timeout
, period
);
7930 wrqu
->data
.length
= strlen(extra
) + 1;
7935 static int ipw2100_wx_set_preamble(struct net_device
*dev
,
7936 struct iw_request_info
*info
,
7937 union iwreq_data
*wrqu
, char *extra
)
7939 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7940 int err
, mode
= *(int *)extra
;
7942 mutex_lock(&priv
->action_mutex
);
7943 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7949 priv
->config
|= CFG_LONG_PREAMBLE
;
7951 priv
->config
&= ~CFG_LONG_PREAMBLE
;
7957 err
= ipw2100_system_config(priv
, 0);
7960 mutex_unlock(&priv
->action_mutex
);
7964 static int ipw2100_wx_get_preamble(struct net_device
*dev
,
7965 struct iw_request_info
*info
,
7966 union iwreq_data
*wrqu
, char *extra
)
7969 * This can be called at any time. No action lock required
7972 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7974 if (priv
->config
& CFG_LONG_PREAMBLE
)
7975 snprintf(wrqu
->name
, IFNAMSIZ
, "long (1)");
7977 snprintf(wrqu
->name
, IFNAMSIZ
, "auto (0)");
7982 #ifdef CONFIG_IPW2100_MONITOR
7983 static int ipw2100_wx_set_crc_check(struct net_device
*dev
,
7984 struct iw_request_info
*info
,
7985 union iwreq_data
*wrqu
, char *extra
)
7987 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7988 int err
, mode
= *(int *)extra
;
7990 mutex_lock(&priv
->action_mutex
);
7991 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7997 priv
->config
|= CFG_CRC_CHECK
;
7999 priv
->config
&= ~CFG_CRC_CHECK
;
8007 mutex_unlock(&priv
->action_mutex
);
8011 static int ipw2100_wx_get_crc_check(struct net_device
*dev
,
8012 struct iw_request_info
*info
,
8013 union iwreq_data
*wrqu
, char *extra
)
8016 * This can be called at any time. No action lock required
8019 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8021 if (priv
->config
& CFG_CRC_CHECK
)
8022 snprintf(wrqu
->name
, IFNAMSIZ
, "CRC checked (1)");
8024 snprintf(wrqu
->name
, IFNAMSIZ
, "CRC ignored (0)");
8028 #endif /* CONFIG_IPW2100_MONITOR */
8030 static iw_handler ipw2100_wx_handlers
[] = {
8031 IW_HANDLER(SIOCGIWNAME
, ipw2100_wx_get_name
),
8032 IW_HANDLER(SIOCSIWFREQ
, ipw2100_wx_set_freq
),
8033 IW_HANDLER(SIOCGIWFREQ
, ipw2100_wx_get_freq
),
8034 IW_HANDLER(SIOCSIWMODE
, ipw2100_wx_set_mode
),
8035 IW_HANDLER(SIOCGIWMODE
, ipw2100_wx_get_mode
),
8036 IW_HANDLER(SIOCGIWRANGE
, ipw2100_wx_get_range
),
8037 IW_HANDLER(SIOCSIWAP
, ipw2100_wx_set_wap
),
8038 IW_HANDLER(SIOCGIWAP
, ipw2100_wx_get_wap
),
8039 IW_HANDLER(SIOCSIWMLME
, ipw2100_wx_set_mlme
),
8040 IW_HANDLER(SIOCSIWSCAN
, ipw2100_wx_set_scan
),
8041 IW_HANDLER(SIOCGIWSCAN
, ipw2100_wx_get_scan
),
8042 IW_HANDLER(SIOCSIWESSID
, ipw2100_wx_set_essid
),
8043 IW_HANDLER(SIOCGIWESSID
, ipw2100_wx_get_essid
),
8044 IW_HANDLER(SIOCSIWNICKN
, ipw2100_wx_set_nick
),
8045 IW_HANDLER(SIOCGIWNICKN
, ipw2100_wx_get_nick
),
8046 IW_HANDLER(SIOCSIWRATE
, ipw2100_wx_set_rate
),
8047 IW_HANDLER(SIOCGIWRATE
, ipw2100_wx_get_rate
),
8048 IW_HANDLER(SIOCSIWRTS
, ipw2100_wx_set_rts
),
8049 IW_HANDLER(SIOCGIWRTS
, ipw2100_wx_get_rts
),
8050 IW_HANDLER(SIOCSIWFRAG
, ipw2100_wx_set_frag
),
8051 IW_HANDLER(SIOCGIWFRAG
, ipw2100_wx_get_frag
),
8052 IW_HANDLER(SIOCSIWTXPOW
, ipw2100_wx_set_txpow
),
8053 IW_HANDLER(SIOCGIWTXPOW
, ipw2100_wx_get_txpow
),
8054 IW_HANDLER(SIOCSIWRETRY
, ipw2100_wx_set_retry
),
8055 IW_HANDLER(SIOCGIWRETRY
, ipw2100_wx_get_retry
),
8056 IW_HANDLER(SIOCSIWENCODE
, ipw2100_wx_set_encode
),
8057 IW_HANDLER(SIOCGIWENCODE
, ipw2100_wx_get_encode
),
8058 IW_HANDLER(SIOCSIWPOWER
, ipw2100_wx_set_power
),
8059 IW_HANDLER(SIOCGIWPOWER
, ipw2100_wx_get_power
),
8060 IW_HANDLER(SIOCSIWGENIE
, ipw2100_wx_set_genie
),
8061 IW_HANDLER(SIOCGIWGENIE
, ipw2100_wx_get_genie
),
8062 IW_HANDLER(SIOCSIWAUTH
, ipw2100_wx_set_auth
),
8063 IW_HANDLER(SIOCGIWAUTH
, ipw2100_wx_get_auth
),
8064 IW_HANDLER(SIOCSIWENCODEEXT
, ipw2100_wx_set_encodeext
),
8065 IW_HANDLER(SIOCGIWENCODEEXT
, ipw2100_wx_get_encodeext
),
8068 #define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV
8069 #define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1
8070 #define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2
8071 #define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3
8072 #define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4
8073 #define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5
8074 #define IPW2100_PRIV_SET_CRC_CHECK SIOCIWFIRSTPRIV+6
8075 #define IPW2100_PRIV_GET_CRC_CHECK SIOCIWFIRSTPRIV+7
8077 static const struct iw_priv_args ipw2100_private_args
[] = {
8079 #ifdef CONFIG_IPW2100_MONITOR
8081 IPW2100_PRIV_SET_MONITOR
,
8082 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 2, 0, "monitor"},
8085 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 0, 0, "reset"},
8086 #endif /* CONFIG_IPW2100_MONITOR */
8089 IPW2100_PRIV_SET_POWER
,
8090 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_power"},
8092 IPW2100_PRIV_GET_POWER
,
8093 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| MAX_POWER_STRING
,
8096 IPW2100_PRIV_SET_LONGPREAMBLE
,
8097 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_preamble"},
8099 IPW2100_PRIV_GET_LONGPREAMBLE
,
8100 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| IFNAMSIZ
, "get_preamble"},
8101 #ifdef CONFIG_IPW2100_MONITOR
8103 IPW2100_PRIV_SET_CRC_CHECK
,
8104 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_crc_check"},
8106 IPW2100_PRIV_GET_CRC_CHECK
,
8107 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| IFNAMSIZ
, "get_crc_check"},
8108 #endif /* CONFIG_IPW2100_MONITOR */
8111 static iw_handler ipw2100_private_handler
[] = {
8112 #ifdef CONFIG_IPW2100_MONITOR
8113 ipw2100_wx_set_promisc
,
8115 #else /* CONFIG_IPW2100_MONITOR */
8118 #endif /* CONFIG_IPW2100_MONITOR */
8119 ipw2100_wx_set_powermode
,
8120 ipw2100_wx_get_powermode
,
8121 ipw2100_wx_set_preamble
,
8122 ipw2100_wx_get_preamble
,
8123 #ifdef CONFIG_IPW2100_MONITOR
8124 ipw2100_wx_set_crc_check
,
8125 ipw2100_wx_get_crc_check
,
8126 #else /* CONFIG_IPW2100_MONITOR */
8129 #endif /* CONFIG_IPW2100_MONITOR */
8133 * Get wireless statistics.
8134 * Called by /proc/net/wireless
8135 * Also called by SIOCGIWSTATS
8137 static struct iw_statistics
*ipw2100_wx_wireless_stats(struct net_device
*dev
)
8152 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8153 struct iw_statistics
*wstats
;
8154 u32 rssi
, tx_retries
, missed_beacons
, tx_failures
;
8155 u32 ord_len
= sizeof(u32
);
8158 return (struct iw_statistics
*)NULL
;
8160 wstats
= &priv
->wstats
;
8162 /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
8163 * ipw2100_wx_wireless_stats seems to be called before fw is
8164 * initialized. STATUS_ASSOCIATED will only be set if the hw is up
8165 * and associated; if not associcated, the values are all meaningless
8166 * anyway, so set them all to NULL and INVALID */
8167 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8168 wstats
->miss
.beacon
= 0;
8169 wstats
->discard
.retries
= 0;
8170 wstats
->qual
.qual
= 0;
8171 wstats
->qual
.level
= 0;
8172 wstats
->qual
.noise
= 0;
8173 wstats
->qual
.updated
= 7;
8174 wstats
->qual
.updated
|= IW_QUAL_NOISE_INVALID
|
8175 IW_QUAL_QUAL_INVALID
| IW_QUAL_LEVEL_INVALID
;
8179 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_PERCENT_MISSED_BCNS
,
8180 &missed_beacons
, &ord_len
))
8181 goto fail_get_ordinal
;
8183 /* If we don't have a connection the quality and level is 0 */
8184 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8185 wstats
->qual
.qual
= 0;
8186 wstats
->qual
.level
= 0;
8188 if (ipw2100_get_ordinal(priv
, IPW_ORD_RSSI_AVG_CURR
,
8190 goto fail_get_ordinal
;
8191 wstats
->qual
.level
= rssi
+ IPW2100_RSSI_TO_DBM
;
8193 rssi_qual
= rssi
* POOR
/ 10;
8195 rssi_qual
= (rssi
- 10) * (FAIR
- POOR
) / 5 + POOR
;
8197 rssi_qual
= (rssi
- 15) * (GOOD
- FAIR
) / 5 + FAIR
;
8199 rssi_qual
= (rssi
- 20) * (VERY_GOOD
- GOOD
) /
8202 rssi_qual
= (rssi
- 30) * (PERFECT
- VERY_GOOD
) /
8205 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_PERCENT_RETRIES
,
8206 &tx_retries
, &ord_len
))
8207 goto fail_get_ordinal
;
8209 if (tx_retries
> 75)
8210 tx_qual
= (90 - tx_retries
) * POOR
/ 15;
8211 else if (tx_retries
> 70)
8212 tx_qual
= (75 - tx_retries
) * (FAIR
- POOR
) / 5 + POOR
;
8213 else if (tx_retries
> 65)
8214 tx_qual
= (70 - tx_retries
) * (GOOD
- FAIR
) / 5 + FAIR
;
8215 else if (tx_retries
> 50)
8216 tx_qual
= (65 - tx_retries
) * (VERY_GOOD
- GOOD
) /
8219 tx_qual
= (50 - tx_retries
) *
8220 (PERFECT
- VERY_GOOD
) / 50 + VERY_GOOD
;
8222 if (missed_beacons
> 50)
8223 beacon_qual
= (60 - missed_beacons
) * POOR
/ 10;
8224 else if (missed_beacons
> 40)
8225 beacon_qual
= (50 - missed_beacons
) * (FAIR
- POOR
) /
8227 else if (missed_beacons
> 32)
8228 beacon_qual
= (40 - missed_beacons
) * (GOOD
- FAIR
) /
8230 else if (missed_beacons
> 20)
8231 beacon_qual
= (32 - missed_beacons
) *
8232 (VERY_GOOD
- GOOD
) / 20 + GOOD
;
8234 beacon_qual
= (20 - missed_beacons
) *
8235 (PERFECT
- VERY_GOOD
) / 20 + VERY_GOOD
;
8237 quality
= min(tx_qual
, rssi_qual
);
8238 quality
= min(beacon_qual
, quality
);
8240 #ifdef CONFIG_IPW2100_DEBUG
8241 if (beacon_qual
== quality
)
8242 IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
8243 else if (tx_qual
== quality
)
8244 IPW_DEBUG_WX("Quality clamped by Tx Retries\n");
8245 else if (quality
!= 100)
8246 IPW_DEBUG_WX("Quality clamped by Signal Strength\n");
8248 IPW_DEBUG_WX("Quality not clamped.\n");
8251 wstats
->qual
.qual
= quality
;
8252 wstats
->qual
.level
= rssi
+ IPW2100_RSSI_TO_DBM
;
8255 wstats
->qual
.noise
= 0;
8256 wstats
->qual
.updated
= 7;
8257 wstats
->qual
.updated
|= IW_QUAL_NOISE_INVALID
;
8259 /* FIXME: this is percent and not a # */
8260 wstats
->miss
.beacon
= missed_beacons
;
8262 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_TX_FAILURES
,
8263 &tx_failures
, &ord_len
))
8264 goto fail_get_ordinal
;
8265 wstats
->discard
.retries
= tx_failures
;
8270 IPW_DEBUG_WX("failed querying ordinals.\n");
8272 return (struct iw_statistics
*)NULL
;
8275 static const struct iw_handler_def ipw2100_wx_handler_def
= {
8276 .standard
= ipw2100_wx_handlers
,
8277 .num_standard
= ARRAY_SIZE(ipw2100_wx_handlers
),
8278 .num_private
= ARRAY_SIZE(ipw2100_private_handler
),
8279 .num_private_args
= ARRAY_SIZE(ipw2100_private_args
),
8280 .private = (iw_handler
*) ipw2100_private_handler
,
8281 .private_args
= (struct iw_priv_args
*)ipw2100_private_args
,
8282 .get_wireless_stats
= ipw2100_wx_wireless_stats
,
8285 static void ipw2100_wx_event_work(struct work_struct
*work
)
8287 struct ipw2100_priv
*priv
=
8288 container_of(work
, struct ipw2100_priv
, wx_event_work
.work
);
8289 union iwreq_data wrqu
;
8290 unsigned int len
= ETH_ALEN
;
8292 if (priv
->status
& STATUS_STOPPING
)
8295 mutex_lock(&priv
->action_mutex
);
8297 IPW_DEBUG_WX("enter\n");
8299 mutex_unlock(&priv
->action_mutex
);
8301 wrqu
.ap_addr
.sa_family
= ARPHRD_ETHER
;
8303 /* Fetch BSSID from the hardware */
8304 if (!(priv
->status
& (STATUS_ASSOCIATING
| STATUS_ASSOCIATED
)) ||
8305 priv
->status
& STATUS_RF_KILL_MASK
||
8306 ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
,
8307 &priv
->bssid
, &len
)) {
8308 eth_zero_addr(wrqu
.ap_addr
.sa_data
);
8310 /* We now have the BSSID, so can finish setting to the full
8311 * associated state */
8312 memcpy(wrqu
.ap_addr
.sa_data
, priv
->bssid
, ETH_ALEN
);
8313 memcpy(priv
->ieee
->bssid
, priv
->bssid
, ETH_ALEN
);
8314 priv
->status
&= ~STATUS_ASSOCIATING
;
8315 priv
->status
|= STATUS_ASSOCIATED
;
8316 netif_carrier_on(priv
->net_dev
);
8317 netif_wake_queue(priv
->net_dev
);
8320 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8321 IPW_DEBUG_WX("Configuring ESSID\n");
8322 mutex_lock(&priv
->action_mutex
);
8323 /* This is a disassociation event, so kick the firmware to
8324 * look for another AP */
8325 if (priv
->config
& CFG_STATIC_ESSID
)
8326 ipw2100_set_essid(priv
, priv
->essid
, priv
->essid_len
,
8329 ipw2100_set_essid(priv
, NULL
, 0, 0);
8330 mutex_unlock(&priv
->action_mutex
);
8333 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
8336 #define IPW2100_FW_MAJOR_VERSION 1
8337 #define IPW2100_FW_MINOR_VERSION 3
8339 #define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8)
8340 #define IPW2100_FW_MAJOR(x) (x & 0xff)
8342 #define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \
8343 IPW2100_FW_MAJOR_VERSION)
8345 #define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \
8346 "." __stringify(IPW2100_FW_MINOR_VERSION)
8348 #define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw"
8352 BINARY FIRMWARE HEADER FORMAT
8356 2 2 mode == 0:BSS,1:IBSS,2:MONITOR
8359 C fw_len firmware data
8360 12 + fw_len uc_len microcode data
8364 struct ipw2100_fw_header
{
8367 unsigned int fw_size
;
8368 unsigned int uc_size
;
8371 static int ipw2100_mod_firmware_load(struct ipw2100_fw
*fw
)
8373 struct ipw2100_fw_header
*h
=
8374 (struct ipw2100_fw_header
*)fw
->fw_entry
->data
;
8376 if (IPW2100_FW_MAJOR(h
->version
) != IPW2100_FW_MAJOR_VERSION
) {
8377 printk(KERN_WARNING DRV_NAME
": Firmware image not compatible "
8378 "(detected version id of %u). "
8379 "See Documentation/networking/README.ipw2100\n",
8384 fw
->version
= h
->version
;
8385 fw
->fw
.data
= fw
->fw_entry
->data
+ sizeof(struct ipw2100_fw_header
);
8386 fw
->fw
.size
= h
->fw_size
;
8387 fw
->uc
.data
= fw
->fw
.data
+ h
->fw_size
;
8388 fw
->uc
.size
= h
->uc_size
;
8393 static int ipw2100_get_firmware(struct ipw2100_priv
*priv
,
8394 struct ipw2100_fw
*fw
)
8399 IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n",
8400 priv
->net_dev
->name
);
8402 switch (priv
->ieee
->iw_mode
) {
8404 fw_name
= IPW2100_FW_NAME("-i");
8406 #ifdef CONFIG_IPW2100_MONITOR
8407 case IW_MODE_MONITOR
:
8408 fw_name
= IPW2100_FW_NAME("-p");
8413 fw_name
= IPW2100_FW_NAME("");
8417 rc
= request_firmware(&fw
->fw_entry
, fw_name
, &priv
->pci_dev
->dev
);
8420 printk(KERN_ERR DRV_NAME
": "
8421 "%s: Firmware '%s' not available or load failed.\n",
8422 priv
->net_dev
->name
, fw_name
);
8425 IPW_DEBUG_INFO("firmware data %p size %zd\n", fw
->fw_entry
->data
,
8426 fw
->fw_entry
->size
);
8428 ipw2100_mod_firmware_load(fw
);
8433 MODULE_FIRMWARE(IPW2100_FW_NAME("-i"));
8434 #ifdef CONFIG_IPW2100_MONITOR
8435 MODULE_FIRMWARE(IPW2100_FW_NAME("-p"));
8437 MODULE_FIRMWARE(IPW2100_FW_NAME(""));
8439 static void ipw2100_release_firmware(struct ipw2100_priv
*priv
,
8440 struct ipw2100_fw
*fw
)
8443 release_firmware(fw
->fw_entry
);
8444 fw
->fw_entry
= NULL
;
8447 static int ipw2100_get_fwversion(struct ipw2100_priv
*priv
, char *buf
,
8450 char ver
[MAX_FW_VERSION_LEN
];
8451 u32 len
= MAX_FW_VERSION_LEN
;
8454 /* firmware version is an ascii string (max len of 14) */
8455 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_FW_VER_NUM
, ver
, &len
))
8460 for (i
= 0; i
< len
; i
++)
8466 static int ipw2100_get_ucodeversion(struct ipw2100_priv
*priv
, char *buf
,
8470 u32 len
= sizeof(ver
);
8471 /* microcode version is a 32 bit integer */
8472 if (ipw2100_get_ordinal(priv
, IPW_ORD_UCODE_VERSION
, &ver
, &len
))
8474 return snprintf(buf
, max
, "%08X", ver
);
8478 * On exit, the firmware will have been freed from the fw list
8480 static int ipw2100_fw_download(struct ipw2100_priv
*priv
, struct ipw2100_fw
*fw
)
8482 /* firmware is constructed of N contiguous entries, each entry is
8486 * 0 4 address to write to
8487 * 4 2 length of data run
8493 const unsigned char *firmware_data
= fw
->fw
.data
;
8494 unsigned int firmware_data_left
= fw
->fw
.size
;
8496 while (firmware_data_left
> 0) {
8497 addr
= *(u32
*) (firmware_data
);
8499 firmware_data_left
-= 4;
8501 len
= *(u16
*) (firmware_data
);
8503 firmware_data_left
-= 2;
8506 printk(KERN_ERR DRV_NAME
": "
8507 "Invalid firmware run-length of %d bytes\n",
8512 write_nic_memory(priv
->net_dev
, addr
, len
, firmware_data
);
8513 firmware_data
+= len
;
8514 firmware_data_left
-= len
;
8520 struct symbol_alive_response
{
8529 u16 clock_settle_time
; // 1us LSB
8530 u16 powerup_settle_time
; // 1us LSB
8531 u16 hop_settle_time
; // 1us LSB
8532 u8 date
[3]; // month, day, year
8533 u8 time
[2]; // hours, minutes
8537 static int ipw2100_ucode_download(struct ipw2100_priv
*priv
,
8538 struct ipw2100_fw
*fw
)
8540 struct net_device
*dev
= priv
->net_dev
;
8541 const unsigned char *microcode_data
= fw
->uc
.data
;
8542 unsigned int microcode_data_left
= fw
->uc
.size
;
8543 void __iomem
*reg
= priv
->ioaddr
;
8545 struct symbol_alive_response response
;
8549 /* Symbol control */
8550 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x703);
8552 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x707);
8556 write_nic_byte(dev
, 0x210014, 0x72); /* fifo width =16 */
8558 write_nic_byte(dev
, 0x210014, 0x72); /* fifo width =16 */
8561 /* EN_CS_ACCESS bit to reset control store pointer */
8562 write_nic_byte(dev
, 0x210000, 0x40);
8564 write_nic_byte(dev
, 0x210000, 0x0);
8566 write_nic_byte(dev
, 0x210000, 0x40);
8569 /* copy microcode from buffer into Symbol */
8571 while (microcode_data_left
> 0) {
8572 write_nic_byte(dev
, 0x210010, *microcode_data
++);
8573 write_nic_byte(dev
, 0x210010, *microcode_data
++);
8574 microcode_data_left
-= 2;
8577 /* EN_CS_ACCESS bit to reset the control store pointer */
8578 write_nic_byte(dev
, 0x210000, 0x0);
8581 /* Enable System (Reg 0)
8582 * first enable causes garbage in RX FIFO */
8583 write_nic_byte(dev
, 0x210000, 0x0);
8585 write_nic_byte(dev
, 0x210000, 0x80);
8588 /* Reset External Baseband Reg */
8589 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x703);
8591 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x707);
8594 /* HW Config (Reg 5) */
8595 write_nic_byte(dev
, 0x210014, 0x72); // fifo width =16
8597 write_nic_byte(dev
, 0x210014, 0x72); // fifo width =16
8600 /* Enable System (Reg 0)
8601 * second enable should be OK */
8602 write_nic_byte(dev
, 0x210000, 0x00); // clear enable system
8604 write_nic_byte(dev
, 0x210000, 0x80); // set enable system
8606 /* check Symbol is enabled - upped this from 5 as it wasn't always
8607 * catching the update */
8608 for (i
= 0; i
< 10; i
++) {
8611 /* check Dino is enabled bit */
8612 read_nic_byte(dev
, 0x210000, &data
);
8618 printk(KERN_ERR DRV_NAME
": %s: Error initializing Symbol\n",
8623 /* Get Symbol alive response */
8624 for (i
= 0; i
< 30; i
++) {
8625 /* Read alive response structure */
8627 j
< (sizeof(struct symbol_alive_response
) >> 1); j
++)
8628 read_nic_word(dev
, 0x210004, ((u16
*) & response
) + j
);
8630 if ((response
.cmd_id
== 1) && (response
.ucode_valid
== 0x1))
8636 printk(KERN_ERR DRV_NAME
8637 ": %s: No response from Symbol - hw not alive\n",
8639 printk_buf(IPW_DL_ERROR
, (u8
*) & response
, sizeof(response
));