1 /******************************************************************************
3 Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved.
5 This program is free software; you can redistribute it and/or modify it
6 under the terms of version 2 of the GNU General Public License as
7 published by the Free Software Foundation.
9 This program is distributed in the hope that it will be useful, but WITHOUT
10 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 You should have received a copy of the GNU General Public License along with
15 this program; if not, write to the Free Software Foundation, Inc., 59
16 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 The full GNU General Public License is included in this distribution in the
22 Intel Linux Wireless <ilw@linux.intel.com>
23 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 Portions of this file are based on the sample_* files provided by Wireless
26 Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
29 Portions of this file are based on the Host AP project,
30 Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
32 Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
34 Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
35 ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
36 available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
38 ******************************************************************************/
41 Initial driver on which this is based was developed by Janusz Gorycki,
42 Maciej Urbaniak, and Maciej Sosnowski.
44 Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
48 Tx - Commands and Data
50 Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
51 Each TBD contains a pointer to the physical (dma_addr_t) address of data being
52 sent to the firmware as well as the length of the data.
54 The host writes to the TBD queue at the WRITE index. The WRITE index points
55 to the _next_ packet to be written and is advanced when after the TBD has been
58 The firmware pulls from the TBD queue at the READ index. The READ index points
59 to the currently being read entry, and is advanced once the firmware is
62 When data is sent to the firmware, the first TBD is used to indicate to the
63 firmware if a Command or Data is being sent. If it is Command, all of the
64 command information is contained within the physical address referred to by the
65 TBD. If it is Data, the first TBD indicates the type of data packet, number
66 of fragments, etc. The next TBD then refers to the actual packet location.
68 The Tx flow cycle is as follows:
70 1) ipw2100_tx() is called by kernel with SKB to transmit
71 2) Packet is move from the tx_free_list and appended to the transmit pending
73 3) work is scheduled to move pending packets into the shared circular queue.
74 4) when placing packet in the circular queue, the incoming SKB is DMA mapped
75 to a physical address. That address is entered into a TBD. Two TBDs are
76 filled out. The first indicating a data packet, the second referring to the
78 5) the packet is removed from tx_pend_list and placed on the end of the
79 firmware pending list (fw_pend_list)
80 6) firmware is notified that the WRITE index has
81 7) Once the firmware has processed the TBD, INTA is triggered.
82 8) For each Tx interrupt received from the firmware, the READ index is checked
83 to see which TBDs are done being processed.
84 9) For each TBD that has been processed, the ISR pulls the oldest packet
85 from the fw_pend_list.
86 10)The packet structure contained in the fw_pend_list is then used
87 to unmap the DMA address and to free the SKB originally passed to the driver
89 11)The packet structure is placed onto the tx_free_list
91 The above steps are the same for commands, only the msg_free_list/msg_pend_list
92 are used instead of tx_free_list/tx_pend_list
96 Critical Sections / Locking :
98 There are two locks utilized. The first is the low level lock (priv->low_lock)
99 that protects the following:
101 - Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
103 tx_free_list : Holds pre-allocated Tx buffers.
104 TAIL modified in __ipw2100_tx_process()
105 HEAD modified in ipw2100_tx()
107 tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
108 TAIL modified ipw2100_tx()
109 HEAD modified by ipw2100_tx_send_data()
111 msg_free_list : Holds pre-allocated Msg (Command) buffers
112 TAIL modified in __ipw2100_tx_process()
113 HEAD modified in ipw2100_hw_send_command()
115 msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
116 TAIL modified in ipw2100_hw_send_command()
117 HEAD modified in ipw2100_tx_send_commands()
119 The flow of data on the TX side is as follows:
121 MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
122 TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
124 The methods that work on the TBD ring are protected via priv->low_lock.
126 - The internal data state of the device itself
127 - Access to the firmware read/write indexes for the BD queues
130 All external entry functions are locked with the priv->action_lock to ensure
131 that only one external action is invoked at a time.
136 #include <linux/compiler.h>
137 #include <linux/errno.h>
138 #include <linux/if_arp.h>
139 #include <linux/in6.h>
140 #include <linux/in.h>
141 #include <linux/ip.h>
142 #include <linux/kernel.h>
143 #include <linux/kmod.h>
144 #include <linux/module.h>
145 #include <linux/netdevice.h>
146 #include <linux/ethtool.h>
147 #include <linux/pci.h>
148 #include <linux/dma-mapping.h>
149 #include <linux/proc_fs.h>
150 #include <linux/skbuff.h>
151 #include <asm/uaccess.h>
153 #include <linux/fs.h>
154 #include <linux/mm.h>
155 #include <linux/slab.h>
156 #include <linux/unistd.h>
157 #include <linux/stringify.h>
158 #include <linux/tcp.h>
159 #include <linux/types.h>
160 #include <linux/time.h>
161 #include <linux/firmware.h>
162 #include <linux/acpi.h>
163 #include <linux/ctype.h>
164 #include <linux/pm_qos.h>
166 #include <net/lib80211.h>
171 #define IPW2100_VERSION "git-1.2.2"
173 #define DRV_NAME "ipw2100"
174 #define DRV_VERSION IPW2100_VERSION
175 #define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver"
176 #define DRV_COPYRIGHT "Copyright(c) 2003-2006 Intel Corporation"
178 static struct pm_qos_request ipw2100_pm_qos_req
;
180 /* Debugging stuff */
181 #ifdef CONFIG_IPW2100_DEBUG
182 #define IPW2100_RX_DEBUG /* Reception debugging */
185 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
186 MODULE_VERSION(DRV_VERSION
);
187 MODULE_AUTHOR(DRV_COPYRIGHT
);
188 MODULE_LICENSE("GPL");
190 static int debug
= 0;
191 static int network_mode
= 0;
192 static int channel
= 0;
193 static int associate
= 0;
194 static int disable
= 0;
196 static struct ipw2100_fw ipw2100_firmware
;
199 #include <linux/moduleparam.h>
200 module_param(debug
, int, 0444);
201 module_param_named(mode
, network_mode
, int, 0444);
202 module_param(channel
, int, 0444);
203 module_param(associate
, int, 0444);
204 module_param(disable
, int, 0444);
206 MODULE_PARM_DESC(debug
, "debug level");
207 MODULE_PARM_DESC(mode
, "network mode (0=BSS,1=IBSS,2=Monitor)");
208 MODULE_PARM_DESC(channel
, "channel");
209 MODULE_PARM_DESC(associate
, "auto associate when scanning (default off)");
210 MODULE_PARM_DESC(disable
, "manually disable the radio (default 0 [radio on])");
212 static u32 ipw2100_debug_level
= IPW_DL_NONE
;
214 #ifdef CONFIG_IPW2100_DEBUG
215 #define IPW_DEBUG(level, message...) \
217 if (ipw2100_debug_level & (level)) { \
218 printk(KERN_DEBUG "ipw2100: %c %s ", \
219 in_interrupt() ? 'I' : 'U', __func__); \
224 #define IPW_DEBUG(level, message...) do {} while (0)
225 #endif /* CONFIG_IPW2100_DEBUG */
227 #ifdef CONFIG_IPW2100_DEBUG
228 static const char *command_types
[] = {
230 "unused", /* HOST_ATTENTION */
232 "unused", /* SLEEP */
233 "unused", /* HOST_POWER_DOWN */
236 "unused", /* SET_IMR */
239 "AUTHENTICATION_TYPE",
242 "INTERNATIONAL_MODE",
257 "CLEAR_ALL_MULTICAST",
278 "AP_OR_STATION_TABLE",
282 "unused", /* SAVE_CALIBRATION */
283 "unused", /* RESTORE_CALIBRATION */
287 "HOST_PRE_POWER_DOWN",
288 "unused", /* HOST_INTERRUPT_COALESCING */
290 "CARD_DISABLE_PHY_OFF",
293 "SET_STATION_STAT_BITS",
294 "CLEAR_STATIONS_STAT_BITS",
296 "SET_SECURITY_INFORMATION",
297 "DISASSOCIATION_BSSID",
302 static const long ipw2100_frequencies
[] = {
303 2412, 2417, 2422, 2427,
304 2432, 2437, 2442, 2447,
305 2452, 2457, 2462, 2467,
309 #define FREQ_COUNT ARRAY_SIZE(ipw2100_frequencies)
311 static struct ieee80211_rate ipw2100_bg_rates
[] = {
313 { .bitrate
= 20, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
314 { .bitrate
= 55, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
315 { .bitrate
= 110, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
318 #define RATE_COUNT ARRAY_SIZE(ipw2100_bg_rates)
320 /* Pre-decl until we get the code solid and then we can clean it up */
321 static void ipw2100_tx_send_commands(struct ipw2100_priv
*priv
);
322 static void ipw2100_tx_send_data(struct ipw2100_priv
*priv
);
323 static int ipw2100_adapter_setup(struct ipw2100_priv
*priv
);
325 static void ipw2100_queues_initialize(struct ipw2100_priv
*priv
);
326 static void ipw2100_queues_free(struct ipw2100_priv
*priv
);
327 static int ipw2100_queues_allocate(struct ipw2100_priv
*priv
);
329 static int ipw2100_fw_download(struct ipw2100_priv
*priv
,
330 struct ipw2100_fw
*fw
);
331 static int ipw2100_get_firmware(struct ipw2100_priv
*priv
,
332 struct ipw2100_fw
*fw
);
333 static int ipw2100_get_fwversion(struct ipw2100_priv
*priv
, char *buf
,
335 static int ipw2100_get_ucodeversion(struct ipw2100_priv
*priv
, char *buf
,
337 static void ipw2100_release_firmware(struct ipw2100_priv
*priv
,
338 struct ipw2100_fw
*fw
);
339 static int ipw2100_ucode_download(struct ipw2100_priv
*priv
,
340 struct ipw2100_fw
*fw
);
341 static void ipw2100_wx_event_work(struct work_struct
*work
);
342 static struct iw_statistics
*ipw2100_wx_wireless_stats(struct net_device
*dev
);
343 static struct iw_handler_def ipw2100_wx_handler_def
;
345 static inline void read_register(struct net_device
*dev
, u32 reg
, u32
* val
)
347 struct ipw2100_priv
*priv
= libipw_priv(dev
);
349 *val
= ioread32(priv
->ioaddr
+ reg
);
350 IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg
, *val
);
353 static inline void write_register(struct net_device
*dev
, u32 reg
, u32 val
)
355 struct ipw2100_priv
*priv
= libipw_priv(dev
);
357 iowrite32(val
, priv
->ioaddr
+ reg
);
358 IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg
, val
);
361 static inline void read_register_word(struct net_device
*dev
, u32 reg
,
364 struct ipw2100_priv
*priv
= libipw_priv(dev
);
366 *val
= ioread16(priv
->ioaddr
+ reg
);
367 IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg
, *val
);
370 static inline void read_register_byte(struct net_device
*dev
, u32 reg
, u8
* val
)
372 struct ipw2100_priv
*priv
= libipw_priv(dev
);
374 *val
= ioread8(priv
->ioaddr
+ reg
);
375 IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg
, *val
);
378 static inline void write_register_word(struct net_device
*dev
, u32 reg
, u16 val
)
380 struct ipw2100_priv
*priv
= libipw_priv(dev
);
382 iowrite16(val
, priv
->ioaddr
+ reg
);
383 IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg
, val
);
386 static inline void write_register_byte(struct net_device
*dev
, u32 reg
, u8 val
)
388 struct ipw2100_priv
*priv
= libipw_priv(dev
);
390 iowrite8(val
, priv
->ioaddr
+ reg
);
391 IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg
, val
);
394 static inline void read_nic_dword(struct net_device
*dev
, u32 addr
, u32
* val
)
396 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
397 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
398 read_register(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
401 static inline void write_nic_dword(struct net_device
*dev
, u32 addr
, u32 val
)
403 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
404 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
405 write_register(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
408 static inline void read_nic_word(struct net_device
*dev
, u32 addr
, u16
* val
)
410 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
411 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
412 read_register_word(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
415 static inline void write_nic_word(struct net_device
*dev
, u32 addr
, u16 val
)
417 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
418 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
419 write_register_word(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
422 static inline void read_nic_byte(struct net_device
*dev
, u32 addr
, u8
* val
)
424 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
425 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
426 read_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
429 static inline void write_nic_byte(struct net_device
*dev
, u32 addr
, u8 val
)
431 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
432 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
433 write_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
436 static inline void write_nic_auto_inc_address(struct net_device
*dev
, u32 addr
)
438 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
,
439 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
442 static inline void write_nic_dword_auto_inc(struct net_device
*dev
, u32 val
)
444 write_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, val
);
447 static void write_nic_memory(struct net_device
*dev
, u32 addr
, u32 len
,
455 /* read first nibble byte by byte */
456 aligned_addr
= addr
& (~0x3);
457 dif_len
= addr
- aligned_addr
;
459 /* Start reading at aligned_addr + dif_len */
460 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
462 for (i
= dif_len
; i
< 4; i
++, buf
++)
463 write_register_byte(dev
,
464 IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
471 /* read DWs through autoincrement registers */
472 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
, aligned_addr
);
473 aligned_len
= len
& (~0x3);
474 for (i
= 0; i
< aligned_len
; i
+= 4, buf
+= 4, aligned_addr
+= 4)
475 write_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, *(u32
*) buf
);
477 /* copy the last nibble */
478 dif_len
= len
- aligned_len
;
479 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
, aligned_addr
);
480 for (i
= 0; i
< dif_len
; i
++, buf
++)
481 write_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
485 static void read_nic_memory(struct net_device
*dev
, u32 addr
, u32 len
,
493 /* read first nibble byte by byte */
494 aligned_addr
= addr
& (~0x3);
495 dif_len
= addr
- aligned_addr
;
497 /* Start reading at aligned_addr + dif_len */
498 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
500 for (i
= dif_len
; i
< 4; i
++, buf
++)
501 read_register_byte(dev
,
502 IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
509 /* read DWs through autoincrement registers */
510 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
, aligned_addr
);
511 aligned_len
= len
& (~0x3);
512 for (i
= 0; i
< aligned_len
; i
+= 4, buf
+= 4, aligned_addr
+= 4)
513 read_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, (u32
*) buf
);
515 /* copy the last nibble */
516 dif_len
= len
- aligned_len
;
517 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
, aligned_addr
);
518 for (i
= 0; i
< dif_len
; i
++, buf
++)
519 read_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
+ i
, buf
);
522 static bool ipw2100_hw_is_adapter_in_system(struct net_device
*dev
)
526 read_register(dev
, IPW_REG_DOA_DEBUG_AREA_START
, &dbg
);
528 return dbg
== IPW_DATA_DOA_DEBUG_VALUE
;
531 static int ipw2100_get_ordinal(struct ipw2100_priv
*priv
, u32 ord
,
532 void *val
, u32
* len
)
534 struct ipw2100_ordinals
*ordinals
= &priv
->ordinals
;
541 if (ordinals
->table1_addr
== 0) {
542 printk(KERN_WARNING DRV_NAME
": attempt to use fw ordinals "
543 "before they have been loaded.\n");
547 if (IS_ORDINAL_TABLE_ONE(ordinals
, ord
)) {
548 if (*len
< IPW_ORD_TAB_1_ENTRY_SIZE
) {
549 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
551 printk(KERN_WARNING DRV_NAME
552 ": ordinal buffer length too small, need %zd\n",
553 IPW_ORD_TAB_1_ENTRY_SIZE
);
558 read_nic_dword(priv
->net_dev
,
559 ordinals
->table1_addr
+ (ord
<< 2), &addr
);
560 read_nic_dword(priv
->net_dev
, addr
, val
);
562 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
567 if (IS_ORDINAL_TABLE_TWO(ordinals
, ord
)) {
569 ord
-= IPW_START_ORD_TAB_2
;
571 /* get the address of statistic */
572 read_nic_dword(priv
->net_dev
,
573 ordinals
->table2_addr
+ (ord
<< 3), &addr
);
575 /* get the second DW of statistics ;
576 * two 16-bit words - first is length, second is count */
577 read_nic_dword(priv
->net_dev
,
578 ordinals
->table2_addr
+ (ord
<< 3) + sizeof(u32
),
581 /* get each entry length */
582 field_len
= *((u16
*) & field_info
);
584 /* get number of entries */
585 field_count
= *(((u16
*) & field_info
) + 1);
587 /* abort if no enough memory */
588 total_length
= field_len
* field_count
;
589 if (total_length
> *len
) {
598 /* read the ordinal data from the SRAM */
599 read_nic_memory(priv
->net_dev
, addr
, total_length
, val
);
604 printk(KERN_WARNING DRV_NAME
": ordinal %d neither in table 1 nor "
605 "in table 2\n", ord
);
610 static int ipw2100_set_ordinal(struct ipw2100_priv
*priv
, u32 ord
, u32
* val
,
613 struct ipw2100_ordinals
*ordinals
= &priv
->ordinals
;
616 if (IS_ORDINAL_TABLE_ONE(ordinals
, ord
)) {
617 if (*len
!= IPW_ORD_TAB_1_ENTRY_SIZE
) {
618 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
619 IPW_DEBUG_INFO("wrong size\n");
623 read_nic_dword(priv
->net_dev
,
624 ordinals
->table1_addr
+ (ord
<< 2), &addr
);
626 write_nic_dword(priv
->net_dev
, addr
, *val
);
628 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
633 IPW_DEBUG_INFO("wrong table\n");
634 if (IS_ORDINAL_TABLE_TWO(ordinals
, ord
))
640 static char *snprint_line(char *buf
, size_t count
,
641 const u8
* data
, u32 len
, u32 ofs
)
646 out
= snprintf(buf
, count
, "%08X", ofs
);
648 for (l
= 0, i
= 0; i
< 2; i
++) {
649 out
+= snprintf(buf
+ out
, count
- out
, " ");
650 for (j
= 0; j
< 8 && l
< len
; j
++, l
++)
651 out
+= snprintf(buf
+ out
, count
- out
, "%02X ",
654 out
+= snprintf(buf
+ out
, count
- out
, " ");
657 out
+= snprintf(buf
+ out
, count
- out
, " ");
658 for (l
= 0, i
= 0; i
< 2; i
++) {
659 out
+= snprintf(buf
+ out
, count
- out
, " ");
660 for (j
= 0; j
< 8 && l
< len
; j
++, l
++) {
661 c
= data
[(i
* 8 + j
)];
662 if (!isascii(c
) || !isprint(c
))
665 out
+= snprintf(buf
+ out
, count
- out
, "%c", c
);
669 out
+= snprintf(buf
+ out
, count
- out
, " ");
675 static void printk_buf(int level
, const u8
* data
, u32 len
)
679 if (!(ipw2100_debug_level
& level
))
683 printk(KERN_DEBUG
"%s\n",
684 snprint_line(line
, sizeof(line
), &data
[ofs
],
685 min(len
, 16U), ofs
));
687 len
-= min(len
, 16U);
691 #define MAX_RESET_BACKOFF 10
693 static void schedule_reset(struct ipw2100_priv
*priv
)
695 unsigned long now
= get_seconds();
697 /* If we haven't received a reset request within the backoff period,
698 * then we can reset the backoff interval so this reset occurs
700 if (priv
->reset_backoff
&&
701 (now
- priv
->last_reset
> priv
->reset_backoff
))
702 priv
->reset_backoff
= 0;
704 priv
->last_reset
= get_seconds();
706 if (!(priv
->status
& STATUS_RESET_PENDING
)) {
707 IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
708 priv
->net_dev
->name
, priv
->reset_backoff
);
709 netif_carrier_off(priv
->net_dev
);
710 netif_stop_queue(priv
->net_dev
);
711 priv
->status
|= STATUS_RESET_PENDING
;
712 if (priv
->reset_backoff
)
713 schedule_delayed_work(&priv
->reset_work
,
714 priv
->reset_backoff
* HZ
);
716 schedule_delayed_work(&priv
->reset_work
, 0);
718 if (priv
->reset_backoff
< MAX_RESET_BACKOFF
)
719 priv
->reset_backoff
++;
721 wake_up_interruptible(&priv
->wait_command_queue
);
723 IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
724 priv
->net_dev
->name
);
728 #define HOST_COMPLETE_TIMEOUT (2 * HZ)
729 static int ipw2100_hw_send_command(struct ipw2100_priv
*priv
,
730 struct host_command
*cmd
)
732 struct list_head
*element
;
733 struct ipw2100_tx_packet
*packet
;
737 IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
738 command_types
[cmd
->host_command
], cmd
->host_command
,
739 cmd
->host_command_length
);
740 printk_buf(IPW_DL_HC
, (u8
*) cmd
->host_command_parameters
,
741 cmd
->host_command_length
);
743 spin_lock_irqsave(&priv
->low_lock
, flags
);
745 if (priv
->fatal_error
) {
747 ("Attempt to send command while hardware in fatal error condition.\n");
752 if (!(priv
->status
& STATUS_RUNNING
)) {
754 ("Attempt to send command while hardware is not running.\n");
759 if (priv
->status
& STATUS_CMD_ACTIVE
) {
761 ("Attempt to send command while another command is pending.\n");
766 if (list_empty(&priv
->msg_free_list
)) {
767 IPW_DEBUG_INFO("no available msg buffers\n");
771 priv
->status
|= STATUS_CMD_ACTIVE
;
772 priv
->messages_sent
++;
774 element
= priv
->msg_free_list
.next
;
776 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
777 packet
->jiffy_start
= jiffies
;
779 /* initialize the firmware command packet */
780 packet
->info
.c_struct
.cmd
->host_command_reg
= cmd
->host_command
;
781 packet
->info
.c_struct
.cmd
->host_command_reg1
= cmd
->host_command1
;
782 packet
->info
.c_struct
.cmd
->host_command_len_reg
=
783 cmd
->host_command_length
;
784 packet
->info
.c_struct
.cmd
->sequence
= cmd
->host_command_sequence
;
786 memcpy(packet
->info
.c_struct
.cmd
->host_command_params_reg
,
787 cmd
->host_command_parameters
,
788 sizeof(packet
->info
.c_struct
.cmd
->host_command_params_reg
));
791 DEC_STAT(&priv
->msg_free_stat
);
793 list_add_tail(element
, &priv
->msg_pend_list
);
794 INC_STAT(&priv
->msg_pend_stat
);
796 ipw2100_tx_send_commands(priv
);
797 ipw2100_tx_send_data(priv
);
799 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
802 * We must wait for this command to complete before another
803 * command can be sent... but if we wait more than 3 seconds
804 * then there is a problem.
808 wait_event_interruptible_timeout(priv
->wait_command_queue
,
810 status
& STATUS_CMD_ACTIVE
),
811 HOST_COMPLETE_TIMEOUT
);
814 IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
815 1000 * (HOST_COMPLETE_TIMEOUT
/ HZ
));
816 priv
->fatal_error
= IPW2100_ERR_MSG_TIMEOUT
;
817 priv
->status
&= ~STATUS_CMD_ACTIVE
;
818 schedule_reset(priv
);
822 if (priv
->fatal_error
) {
823 printk(KERN_WARNING DRV_NAME
": %s: firmware fatal error\n",
824 priv
->net_dev
->name
);
828 /* !!!!! HACK TEST !!!!!
829 * When lots of debug trace statements are enabled, the driver
830 * doesn't seem to have as many firmware restart cycles...
832 * As a test, we're sticking in a 1/100s delay here */
833 schedule_timeout_uninterruptible(msecs_to_jiffies(10));
838 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
844 * Verify the values and data access of the hardware
845 * No locks needed or used. No functions called.
847 static int ipw2100_verify(struct ipw2100_priv
*priv
)
852 u32 val1
= 0x76543210;
853 u32 val2
= 0xFEDCBA98;
855 /* Domain 0 check - all values should be DOA_DEBUG */
856 for (address
= IPW_REG_DOA_DEBUG_AREA_START
;
857 address
< IPW_REG_DOA_DEBUG_AREA_END
; address
+= sizeof(u32
)) {
858 read_register(priv
->net_dev
, address
, &data1
);
859 if (data1
!= IPW_DATA_DOA_DEBUG_VALUE
)
863 /* Domain 1 check - use arbitrary read/write compare */
864 for (address
= 0; address
< 5; address
++) {
865 /* The memory area is not used now */
866 write_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x32,
868 write_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x36,
870 read_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x32,
872 read_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x36,
874 if (val1
== data1
&& val2
== data2
)
883 * Loop until the CARD_DISABLED bit is the same value as the
886 * TODO: See if it would be more efficient to do a wait/wake
887 * cycle and have the completion event trigger the wakeup
890 #define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli
891 static int ipw2100_wait_for_card_state(struct ipw2100_priv
*priv
, int state
)
895 u32 len
= sizeof(card_state
);
898 for (i
= 0; i
<= IPW_CARD_DISABLE_COMPLETE_WAIT
* 1000; i
+= 50) {
899 err
= ipw2100_get_ordinal(priv
, IPW_ORD_CARD_DISABLED
,
902 IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
907 /* We'll break out if either the HW state says it is
908 * in the state we want, or if HOST_COMPLETE command
910 if ((card_state
== state
) ||
911 ((priv
->status
& STATUS_ENABLED
) ?
912 IPW_HW_STATE_ENABLED
: IPW_HW_STATE_DISABLED
) == state
) {
913 if (state
== IPW_HW_STATE_ENABLED
)
914 priv
->status
|= STATUS_ENABLED
;
916 priv
->status
&= ~STATUS_ENABLED
;
924 IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
925 state
? "DISABLED" : "ENABLED");
929 /*********************************************************************
930 Procedure : sw_reset_and_clock
931 Purpose : Asserts s/w reset, asserts clock initialization
932 and waits for clock stabilization
933 ********************************************************************/
934 static int sw_reset_and_clock(struct ipw2100_priv
*priv
)
940 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
941 IPW_AUX_HOST_RESET_REG_SW_RESET
);
943 // wait for clock stabilization
944 for (i
= 0; i
< 1000; i
++) {
945 udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY
);
947 // check clock ready bit
948 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, &r
);
949 if (r
& IPW_AUX_HOST_RESET_REG_PRINCETON_RESET
)
954 return -EIO
; // TODO: better error value
956 /* set "initialization complete" bit to move adapter to
958 write_register(priv
->net_dev
, IPW_REG_GP_CNTRL
,
959 IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE
);
961 /* wait for clock stabilization */
962 for (i
= 0; i
< 10000; i
++) {
963 udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY
* 4);
965 /* check clock ready bit */
966 read_register(priv
->net_dev
, IPW_REG_GP_CNTRL
, &r
);
967 if (r
& IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY
)
972 return -EIO
; /* TODO: better error value */
974 /* set D0 standby bit */
975 read_register(priv
->net_dev
, IPW_REG_GP_CNTRL
, &r
);
976 write_register(priv
->net_dev
, IPW_REG_GP_CNTRL
,
977 r
| IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY
);
982 /*********************************************************************
983 Procedure : ipw2100_download_firmware
984 Purpose : Initiaze adapter after power on.
986 1. assert s/w reset first!
987 2. awake clocks & wait for clock stabilization
988 3. hold ARC (don't ask me why...)
989 4. load Dino ucode and reset/clock init again
990 5. zero-out shared mem
992 *******************************************************************/
993 static int ipw2100_download_firmware(struct ipw2100_priv
*priv
)
999 /* Fetch the firmware and microcode */
1000 struct ipw2100_fw ipw2100_firmware
;
1003 if (priv
->fatal_error
) {
1004 IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
1005 "fatal error %d. Interface must be brought down.\n",
1006 priv
->net_dev
->name
, priv
->fatal_error
);
1010 if (!ipw2100_firmware
.version
) {
1011 err
= ipw2100_get_firmware(priv
, &ipw2100_firmware
);
1013 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1014 priv
->net_dev
->name
, err
);
1015 priv
->fatal_error
= IPW2100_ERR_FW_LOAD
;
1020 err
= ipw2100_get_firmware(priv
, &ipw2100_firmware
);
1022 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1023 priv
->net_dev
->name
, err
);
1024 priv
->fatal_error
= IPW2100_ERR_FW_LOAD
;
1028 priv
->firmware_version
= ipw2100_firmware
.version
;
1030 /* s/w reset and clock stabilization */
1031 err
= sw_reset_and_clock(priv
);
1033 IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
1034 priv
->net_dev
->name
, err
);
1038 err
= ipw2100_verify(priv
);
1040 IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
1041 priv
->net_dev
->name
, err
);
1046 write_nic_dword(priv
->net_dev
,
1047 IPW_INTERNAL_REGISTER_HALT_AND_RESET
, 0x80000000);
1049 /* allow ARC to run */
1050 write_register(priv
->net_dev
, IPW_REG_RESET_REG
, 0);
1052 /* load microcode */
1053 err
= ipw2100_ucode_download(priv
, &ipw2100_firmware
);
1055 printk(KERN_ERR DRV_NAME
": %s: Error loading microcode: %d\n",
1056 priv
->net_dev
->name
, err
);
1061 write_nic_dword(priv
->net_dev
,
1062 IPW_INTERNAL_REGISTER_HALT_AND_RESET
, 0x00000000);
1064 /* s/w reset and clock stabilization (again!!!) */
1065 err
= sw_reset_and_clock(priv
);
1067 printk(KERN_ERR DRV_NAME
1068 ": %s: sw_reset_and_clock failed: %d\n",
1069 priv
->net_dev
->name
, err
);
1074 err
= ipw2100_fw_download(priv
, &ipw2100_firmware
);
1076 IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
1077 priv
->net_dev
->name
, err
);
1082 * When the .resume method of the driver is called, the other
1083 * part of the system, i.e. the ide driver could still stay in
1084 * the suspend stage. This prevents us from loading the firmware
1085 * from the disk. --YZ
1088 /* free any storage allocated for firmware image */
1089 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
1092 /* zero out Domain 1 area indirectly (Si requirement) */
1093 for (address
= IPW_HOST_FW_SHARED_AREA0
;
1094 address
< IPW_HOST_FW_SHARED_AREA0_END
; address
+= 4)
1095 write_nic_dword(priv
->net_dev
, address
, 0);
1096 for (address
= IPW_HOST_FW_SHARED_AREA1
;
1097 address
< IPW_HOST_FW_SHARED_AREA1_END
; address
+= 4)
1098 write_nic_dword(priv
->net_dev
, address
, 0);
1099 for (address
= IPW_HOST_FW_SHARED_AREA2
;
1100 address
< IPW_HOST_FW_SHARED_AREA2_END
; address
+= 4)
1101 write_nic_dword(priv
->net_dev
, address
, 0);
1102 for (address
= IPW_HOST_FW_SHARED_AREA3
;
1103 address
< IPW_HOST_FW_SHARED_AREA3_END
; address
+= 4)
1104 write_nic_dword(priv
->net_dev
, address
, 0);
1105 for (address
= IPW_HOST_FW_INTERRUPT_AREA
;
1106 address
< IPW_HOST_FW_INTERRUPT_AREA_END
; address
+= 4)
1107 write_nic_dword(priv
->net_dev
, address
, 0);
1112 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
1116 static inline void ipw2100_enable_interrupts(struct ipw2100_priv
*priv
)
1118 if (priv
->status
& STATUS_INT_ENABLED
)
1120 priv
->status
|= STATUS_INT_ENABLED
;
1121 write_register(priv
->net_dev
, IPW_REG_INTA_MASK
, IPW_INTERRUPT_MASK
);
1124 static inline void ipw2100_disable_interrupts(struct ipw2100_priv
*priv
)
1126 if (!(priv
->status
& STATUS_INT_ENABLED
))
1128 priv
->status
&= ~STATUS_INT_ENABLED
;
1129 write_register(priv
->net_dev
, IPW_REG_INTA_MASK
, 0x0);
1132 static void ipw2100_initialize_ordinals(struct ipw2100_priv
*priv
)
1134 struct ipw2100_ordinals
*ord
= &priv
->ordinals
;
1136 IPW_DEBUG_INFO("enter\n");
1138 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1
,
1141 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2
,
1144 read_nic_dword(priv
->net_dev
, ord
->table1_addr
, &ord
->table1_size
);
1145 read_nic_dword(priv
->net_dev
, ord
->table2_addr
, &ord
->table2_size
);
1147 ord
->table2_size
&= 0x0000FFFF;
1149 IPW_DEBUG_INFO("table 1 size: %d\n", ord
->table1_size
);
1150 IPW_DEBUG_INFO("table 2 size: %d\n", ord
->table2_size
);
1151 IPW_DEBUG_INFO("exit\n");
1154 static inline void ipw2100_hw_set_gpio(struct ipw2100_priv
*priv
)
1158 * Set GPIO 3 writable by FW; GPIO 1 writable
1159 * by driver and enable clock
1161 reg
= (IPW_BIT_GPIO_GPIO3_MASK
| IPW_BIT_GPIO_GPIO1_ENABLE
|
1162 IPW_BIT_GPIO_LED_OFF
);
1163 write_register(priv
->net_dev
, IPW_REG_GPIO
, reg
);
1166 static int rf_kill_active(struct ipw2100_priv
*priv
)
1168 #define MAX_RF_KILL_CHECKS 5
1169 #define RF_KILL_CHECK_DELAY 40
1171 unsigned short value
= 0;
1175 if (!(priv
->hw_features
& HW_FEATURE_RFKILL
)) {
1176 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, false);
1177 priv
->status
&= ~STATUS_RF_KILL_HW
;
1181 for (i
= 0; i
< MAX_RF_KILL_CHECKS
; i
++) {
1182 udelay(RF_KILL_CHECK_DELAY
);
1183 read_register(priv
->net_dev
, IPW_REG_GPIO
, ®
);
1184 value
= (value
<< 1) | ((reg
& IPW_BIT_GPIO_RF_KILL
) ? 0 : 1);
1188 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, true);
1189 priv
->status
|= STATUS_RF_KILL_HW
;
1191 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, false);
1192 priv
->status
&= ~STATUS_RF_KILL_HW
;
1195 return (value
== 0);
1198 static int ipw2100_get_hw_features(struct ipw2100_priv
*priv
)
1204 * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
1207 if (ipw2100_get_ordinal
1208 (priv
, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS
, &addr
, &len
)) {
1209 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1214 IPW_DEBUG_INFO("EEPROM address: %08X\n", addr
);
1217 * EEPROM version is the byte at offset 0xfd in firmware
1218 * We read 4 bytes, then shift out the byte we actually want */
1219 read_nic_dword(priv
->net_dev
, addr
+ 0xFC, &val
);
1220 priv
->eeprom_version
= (val
>> 24) & 0xFF;
1221 IPW_DEBUG_INFO("EEPROM version: %d\n", priv
->eeprom_version
);
1224 * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
1226 * notice that the EEPROM bit is reverse polarity, i.e.
1227 * bit = 0 signifies HW RF kill switch is supported
1228 * bit = 1 signifies HW RF kill switch is NOT supported
1230 read_nic_dword(priv
->net_dev
, addr
+ 0x20, &val
);
1231 if (!((val
>> 24) & 0x01))
1232 priv
->hw_features
|= HW_FEATURE_RFKILL
;
1234 IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
1235 (priv
->hw_features
& HW_FEATURE_RFKILL
) ? "" : "not ");
1241 * Start firmware execution after power on and intialization
1244 * 2. Wait for f/w initialization completes;
1246 static int ipw2100_start_adapter(struct ipw2100_priv
*priv
)
1249 u32 inta
, inta_mask
, gpio
;
1251 IPW_DEBUG_INFO("enter\n");
1253 if (priv
->status
& STATUS_RUNNING
)
1257 * Initialize the hw - drive adapter to DO state by setting
1258 * init_done bit. Wait for clk_ready bit and Download
1261 if (ipw2100_download_firmware(priv
)) {
1262 printk(KERN_ERR DRV_NAME
1263 ": %s: Failed to power on the adapter.\n",
1264 priv
->net_dev
->name
);
1268 /* Clear the Tx, Rx and Msg queues and the r/w indexes
1269 * in the firmware RBD and TBD ring queue */
1270 ipw2100_queues_initialize(priv
);
1272 ipw2100_hw_set_gpio(priv
);
1274 /* TODO -- Look at disabling interrupts here to make sure none
1275 * get fired during FW initialization */
1277 /* Release ARC - clear reset bit */
1278 write_register(priv
->net_dev
, IPW_REG_RESET_REG
, 0);
1280 /* wait for f/w intialization complete */
1281 IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
1284 schedule_timeout_uninterruptible(msecs_to_jiffies(40));
1285 /* Todo... wait for sync command ... */
1287 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
1289 /* check "init done" bit */
1290 if (inta
& IPW2100_INTA_FW_INIT_DONE
) {
1291 /* reset "init done" bit */
1292 write_register(priv
->net_dev
, IPW_REG_INTA
,
1293 IPW2100_INTA_FW_INIT_DONE
);
1297 /* check error conditions : we check these after the firmware
1298 * check so that if there is an error, the interrupt handler
1299 * will see it and the adapter will be reset */
1301 (IPW2100_INTA_FATAL_ERROR
| IPW2100_INTA_PARITY_ERROR
)) {
1302 /* clear error conditions */
1303 write_register(priv
->net_dev
, IPW_REG_INTA
,
1304 IPW2100_INTA_FATAL_ERROR
|
1305 IPW2100_INTA_PARITY_ERROR
);
1309 /* Clear out any pending INTAs since we aren't supposed to have
1310 * interrupts enabled at this point... */
1311 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
1312 read_register(priv
->net_dev
, IPW_REG_INTA_MASK
, &inta_mask
);
1313 inta
&= IPW_INTERRUPT_MASK
;
1314 /* Clear out any pending interrupts */
1315 if (inta
& inta_mask
)
1316 write_register(priv
->net_dev
, IPW_REG_INTA
, inta
);
1318 IPW_DEBUG_FW("f/w initialization complete: %s\n",
1319 i
? "SUCCESS" : "FAILED");
1322 printk(KERN_WARNING DRV_NAME
1323 ": %s: Firmware did not initialize.\n",
1324 priv
->net_dev
->name
);
1328 /* allow firmware to write to GPIO1 & GPIO3 */
1329 read_register(priv
->net_dev
, IPW_REG_GPIO
, &gpio
);
1331 gpio
|= (IPW_BIT_GPIO_GPIO1_MASK
| IPW_BIT_GPIO_GPIO3_MASK
);
1333 write_register(priv
->net_dev
, IPW_REG_GPIO
, gpio
);
1335 /* Ready to receive commands */
1336 priv
->status
|= STATUS_RUNNING
;
1338 /* The adapter has been reset; we are not associated */
1339 priv
->status
&= ~(STATUS_ASSOCIATING
| STATUS_ASSOCIATED
);
1341 IPW_DEBUG_INFO("exit\n");
1346 static inline void ipw2100_reset_fatalerror(struct ipw2100_priv
*priv
)
1348 if (!priv
->fatal_error
)
1351 priv
->fatal_errors
[priv
->fatal_index
++] = priv
->fatal_error
;
1352 priv
->fatal_index
%= IPW2100_ERROR_QUEUE
;
1353 priv
->fatal_error
= 0;
1356 /* NOTE: Our interrupt is disabled when this method is called */
1357 static int ipw2100_power_cycle_adapter(struct ipw2100_priv
*priv
)
1362 IPW_DEBUG_INFO("Power cycling the hardware.\n");
1364 ipw2100_hw_set_gpio(priv
);
1366 /* Step 1. Stop Master Assert */
1367 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1368 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
1370 /* Step 2. Wait for stop Master Assert
1371 * (not more than 50us, otherwise ret error */
1374 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY
);
1375 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
1377 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
1381 priv
->status
&= ~STATUS_RESET_PENDING
;
1385 ("exit - waited too long for master assert stop\n");
1389 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1390 IPW_AUX_HOST_RESET_REG_SW_RESET
);
1392 /* Reset any fatal_error conditions */
1393 ipw2100_reset_fatalerror(priv
);
1395 /* At this point, the adapter is now stopped and disabled */
1396 priv
->status
&= ~(STATUS_RUNNING
| STATUS_ASSOCIATING
|
1397 STATUS_ASSOCIATED
| STATUS_ENABLED
);
1403 * Send the CARD_DISABLE_PHY_OFF command to the card to disable it
1405 * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
1407 * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
1408 * if STATUS_ASSN_LOST is sent.
1410 static int ipw2100_hw_phy_off(struct ipw2100_priv
*priv
)
1413 #define HW_PHY_OFF_LOOP_DELAY (HZ / 5000)
1415 struct host_command cmd
= {
1416 .host_command
= CARD_DISABLE_PHY_OFF
,
1417 .host_command_sequence
= 0,
1418 .host_command_length
= 0,
1423 IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
1425 /* Turn off the radio */
1426 err
= ipw2100_hw_send_command(priv
, &cmd
);
1430 for (i
= 0; i
< 2500; i
++) {
1431 read_nic_dword(priv
->net_dev
, IPW2100_CONTROL_REG
, &val1
);
1432 read_nic_dword(priv
->net_dev
, IPW2100_COMMAND
, &val2
);
1434 if ((val1
& IPW2100_CONTROL_PHY_OFF
) &&
1435 (val2
& IPW2100_COMMAND_PHY_OFF
))
1438 schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY
);
1444 static int ipw2100_enable_adapter(struct ipw2100_priv
*priv
)
1446 struct host_command cmd
= {
1447 .host_command
= HOST_COMPLETE
,
1448 .host_command_sequence
= 0,
1449 .host_command_length
= 0
1453 IPW_DEBUG_HC("HOST_COMPLETE\n");
1455 if (priv
->status
& STATUS_ENABLED
)
1458 mutex_lock(&priv
->adapter_mutex
);
1460 if (rf_kill_active(priv
)) {
1461 IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
1465 err
= ipw2100_hw_send_command(priv
, &cmd
);
1467 IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
1471 err
= ipw2100_wait_for_card_state(priv
, IPW_HW_STATE_ENABLED
);
1473 IPW_DEBUG_INFO("%s: card not responding to init command.\n",
1474 priv
->net_dev
->name
);
1478 if (priv
->stop_hang_check
) {
1479 priv
->stop_hang_check
= 0;
1480 schedule_delayed_work(&priv
->hang_check
, HZ
/ 2);
1484 mutex_unlock(&priv
->adapter_mutex
);
1488 static int ipw2100_hw_stop_adapter(struct ipw2100_priv
*priv
)
1490 #define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100))
1492 struct host_command cmd
= {
1493 .host_command
= HOST_PRE_POWER_DOWN
,
1494 .host_command_sequence
= 0,
1495 .host_command_length
= 0,
1500 if (!(priv
->status
& STATUS_RUNNING
))
1503 priv
->status
|= STATUS_STOPPING
;
1505 /* We can only shut down the card if the firmware is operational. So,
1506 * if we haven't reset since a fatal_error, then we can not send the
1507 * shutdown commands. */
1508 if (!priv
->fatal_error
) {
1509 /* First, make sure the adapter is enabled so that the PHY_OFF
1510 * command can shut it down */
1511 ipw2100_enable_adapter(priv
);
1513 err
= ipw2100_hw_phy_off(priv
);
1515 printk(KERN_WARNING DRV_NAME
1516 ": Error disabling radio %d\n", err
);
1519 * If in D0-standby mode going directly to D3 may cause a
1520 * PCI bus violation. Therefore we must change out of the D0
1523 * Sending the PREPARE_FOR_POWER_DOWN will restrict the
1524 * hardware from going into standby mode and will transition
1525 * out of D0-standby if it is already in that state.
1527 * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
1528 * driver upon completion. Once received, the driver can
1529 * proceed to the D3 state.
1531 * Prepare for power down command to fw. This command would
1532 * take HW out of D0-standby and prepare it for D3 state.
1534 * Currently FW does not support event notification for this
1535 * event. Therefore, skip waiting for it. Just wait a fixed
1538 IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
1540 err
= ipw2100_hw_send_command(priv
, &cmd
);
1542 printk(KERN_WARNING DRV_NAME
": "
1543 "%s: Power down command failed: Error %d\n",
1544 priv
->net_dev
->name
, err
);
1546 schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY
);
1549 priv
->status
&= ~STATUS_ENABLED
;
1552 * Set GPIO 3 writable by FW; GPIO 1 writable
1553 * by driver and enable clock
1555 ipw2100_hw_set_gpio(priv
);
1558 * Power down adapter. Sequence:
1559 * 1. Stop master assert (RESET_REG[9]=1)
1560 * 2. Wait for stop master (RESET_REG[8]==1)
1561 * 3. S/w reset assert (RESET_REG[7] = 1)
1564 /* Stop master assert */
1565 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1566 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
1568 /* wait stop master not more than 50 usec.
1569 * Otherwise return error. */
1570 for (i
= 5; i
> 0; i
--) {
1573 /* Check master stop bit */
1574 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
1576 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
1581 printk(KERN_WARNING DRV_NAME
1582 ": %s: Could now power down adapter.\n",
1583 priv
->net_dev
->name
);
1585 /* assert s/w reset */
1586 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1587 IPW_AUX_HOST_RESET_REG_SW_RESET
);
1589 priv
->status
&= ~(STATUS_RUNNING
| STATUS_STOPPING
);
1594 static int ipw2100_disable_adapter(struct ipw2100_priv
*priv
)
1596 struct host_command cmd
= {
1597 .host_command
= CARD_DISABLE
,
1598 .host_command_sequence
= 0,
1599 .host_command_length
= 0
1603 IPW_DEBUG_HC("CARD_DISABLE\n");
1605 if (!(priv
->status
& STATUS_ENABLED
))
1608 /* Make sure we clear the associated state */
1609 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1611 if (!priv
->stop_hang_check
) {
1612 priv
->stop_hang_check
= 1;
1613 cancel_delayed_work(&priv
->hang_check
);
1616 mutex_lock(&priv
->adapter_mutex
);
1618 err
= ipw2100_hw_send_command(priv
, &cmd
);
1620 printk(KERN_WARNING DRV_NAME
1621 ": exit - failed to send CARD_DISABLE command\n");
1625 err
= ipw2100_wait_for_card_state(priv
, IPW_HW_STATE_DISABLED
);
1627 printk(KERN_WARNING DRV_NAME
1628 ": exit - card failed to change to DISABLED\n");
1632 IPW_DEBUG_INFO("TODO: implement scan state machine\n");
1635 mutex_unlock(&priv
->adapter_mutex
);
1639 static int ipw2100_set_scan_options(struct ipw2100_priv
*priv
)
1641 struct host_command cmd
= {
1642 .host_command
= SET_SCAN_OPTIONS
,
1643 .host_command_sequence
= 0,
1644 .host_command_length
= 8
1648 IPW_DEBUG_INFO("enter\n");
1650 IPW_DEBUG_SCAN("setting scan options\n");
1652 cmd
.host_command_parameters
[0] = 0;
1654 if (!(priv
->config
& CFG_ASSOCIATE
))
1655 cmd
.host_command_parameters
[0] |= IPW_SCAN_NOASSOCIATE
;
1656 if ((priv
->ieee
->sec
.flags
& SEC_ENABLED
) && priv
->ieee
->sec
.enabled
)
1657 cmd
.host_command_parameters
[0] |= IPW_SCAN_MIXED_CELL
;
1658 if (priv
->config
& CFG_PASSIVE_SCAN
)
1659 cmd
.host_command_parameters
[0] |= IPW_SCAN_PASSIVE
;
1661 cmd
.host_command_parameters
[1] = priv
->channel_mask
;
1663 err
= ipw2100_hw_send_command(priv
, &cmd
);
1665 IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
1666 cmd
.host_command_parameters
[0]);
1671 static int ipw2100_start_scan(struct ipw2100_priv
*priv
)
1673 struct host_command cmd
= {
1674 .host_command
= BROADCAST_SCAN
,
1675 .host_command_sequence
= 0,
1676 .host_command_length
= 4
1680 IPW_DEBUG_HC("START_SCAN\n");
1682 cmd
.host_command_parameters
[0] = 0;
1684 /* No scanning if in monitor mode */
1685 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
1688 if (priv
->status
& STATUS_SCANNING
) {
1689 IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
1693 IPW_DEBUG_INFO("enter\n");
1695 /* Not clearing here; doing so makes iwlist always return nothing...
1697 * We should modify the table logic to use aging tables vs. clearing
1698 * the table on each scan start.
1700 IPW_DEBUG_SCAN("starting scan\n");
1702 priv
->status
|= STATUS_SCANNING
;
1703 err
= ipw2100_hw_send_command(priv
, &cmd
);
1705 priv
->status
&= ~STATUS_SCANNING
;
1707 IPW_DEBUG_INFO("exit\n");
1712 static const struct libipw_geo ipw_geos
[] = {
1716 .bg
= {{2412, 1}, {2417, 2}, {2422, 3},
1717 {2427, 4}, {2432, 5}, {2437, 6},
1718 {2442, 7}, {2447, 8}, {2452, 9},
1719 {2457, 10}, {2462, 11}, {2467, 12},
1720 {2472, 13}, {2484, 14}},
1724 static int ipw2100_up(struct ipw2100_priv
*priv
, int deferred
)
1726 unsigned long flags
;
1729 u32 ord_len
= sizeof(lock
);
1731 /* Age scan list entries found before suspend */
1732 if (priv
->suspend_time
) {
1733 libipw_networks_age(priv
->ieee
, priv
->suspend_time
);
1734 priv
->suspend_time
= 0;
1737 /* Quiet if manually disabled. */
1738 if (priv
->status
& STATUS_RF_KILL_SW
) {
1739 IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
1740 "switch\n", priv
->net_dev
->name
);
1744 /* the ipw2100 hardware really doesn't want power management delays
1745 * longer than 175usec
1747 pm_qos_update_request(&ipw2100_pm_qos_req
, 175);
1749 /* If the interrupt is enabled, turn it off... */
1750 spin_lock_irqsave(&priv
->low_lock
, flags
);
1751 ipw2100_disable_interrupts(priv
);
1753 /* Reset any fatal_error conditions */
1754 ipw2100_reset_fatalerror(priv
);
1755 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1757 if (priv
->status
& STATUS_POWERED
||
1758 (priv
->status
& STATUS_RESET_PENDING
)) {
1759 /* Power cycle the card ... */
1760 if (ipw2100_power_cycle_adapter(priv
)) {
1761 printk(KERN_WARNING DRV_NAME
1762 ": %s: Could not cycle adapter.\n",
1763 priv
->net_dev
->name
);
1768 priv
->status
|= STATUS_POWERED
;
1770 /* Load the firmware, start the clocks, etc. */
1771 if (ipw2100_start_adapter(priv
)) {
1772 printk(KERN_ERR DRV_NAME
1773 ": %s: Failed to start the firmware.\n",
1774 priv
->net_dev
->name
);
1779 ipw2100_initialize_ordinals(priv
);
1781 /* Determine capabilities of this particular HW configuration */
1782 if (ipw2100_get_hw_features(priv
)) {
1783 printk(KERN_ERR DRV_NAME
1784 ": %s: Failed to determine HW features.\n",
1785 priv
->net_dev
->name
);
1790 /* Initialize the geo */
1791 libipw_set_geo(priv
->ieee
, &ipw_geos
[0]);
1792 priv
->ieee
->freq_band
= LIBIPW_24GHZ_BAND
;
1795 if (ipw2100_set_ordinal(priv
, IPW_ORD_PERS_DB_LOCK
, &lock
, &ord_len
)) {
1796 printk(KERN_ERR DRV_NAME
1797 ": %s: Failed to clear ordinal lock.\n",
1798 priv
->net_dev
->name
);
1803 priv
->status
&= ~STATUS_SCANNING
;
1805 if (rf_kill_active(priv
)) {
1806 printk(KERN_INFO
"%s: Radio is disabled by RF switch.\n",
1807 priv
->net_dev
->name
);
1809 if (priv
->stop_rf_kill
) {
1810 priv
->stop_rf_kill
= 0;
1811 schedule_delayed_work(&priv
->rf_kill
,
1812 round_jiffies_relative(HZ
));
1818 /* Turn on the interrupt so that commands can be processed */
1819 ipw2100_enable_interrupts(priv
);
1821 /* Send all of the commands that must be sent prior to
1823 if (ipw2100_adapter_setup(priv
)) {
1824 printk(KERN_ERR DRV_NAME
": %s: Failed to start the card.\n",
1825 priv
->net_dev
->name
);
1831 /* Enable the adapter - sends HOST_COMPLETE */
1832 if (ipw2100_enable_adapter(priv
)) {
1833 printk(KERN_ERR DRV_NAME
": "
1834 "%s: failed in call to enable adapter.\n",
1835 priv
->net_dev
->name
);
1836 ipw2100_hw_stop_adapter(priv
);
1841 /* Start a scan . . . */
1842 ipw2100_set_scan_options(priv
);
1843 ipw2100_start_scan(priv
);
1850 static void ipw2100_down(struct ipw2100_priv
*priv
)
1852 unsigned long flags
;
1853 union iwreq_data wrqu
= {
1855 .sa_family
= ARPHRD_ETHER
}
1857 int associated
= priv
->status
& STATUS_ASSOCIATED
;
1859 /* Kill the RF switch timer */
1860 if (!priv
->stop_rf_kill
) {
1861 priv
->stop_rf_kill
= 1;
1862 cancel_delayed_work(&priv
->rf_kill
);
1865 /* Kill the firmware hang check timer */
1866 if (!priv
->stop_hang_check
) {
1867 priv
->stop_hang_check
= 1;
1868 cancel_delayed_work(&priv
->hang_check
);
1871 /* Kill any pending resets */
1872 if (priv
->status
& STATUS_RESET_PENDING
)
1873 cancel_delayed_work(&priv
->reset_work
);
1875 /* Make sure the interrupt is on so that FW commands will be
1876 * processed correctly */
1877 spin_lock_irqsave(&priv
->low_lock
, flags
);
1878 ipw2100_enable_interrupts(priv
);
1879 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1881 if (ipw2100_hw_stop_adapter(priv
))
1882 printk(KERN_ERR DRV_NAME
": %s: Error stopping adapter.\n",
1883 priv
->net_dev
->name
);
1885 /* Do not disable the interrupt until _after_ we disable
1886 * the adaptor. Otherwise the CARD_DISABLE command will never
1887 * be ack'd by the firmware */
1888 spin_lock_irqsave(&priv
->low_lock
, flags
);
1889 ipw2100_disable_interrupts(priv
);
1890 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1892 pm_qos_update_request(&ipw2100_pm_qos_req
, PM_QOS_DEFAULT_VALUE
);
1894 /* We have to signal any supplicant if we are disassociating */
1896 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
1898 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1899 netif_carrier_off(priv
->net_dev
);
1900 netif_stop_queue(priv
->net_dev
);
1903 static int ipw2100_wdev_init(struct net_device
*dev
)
1905 struct ipw2100_priv
*priv
= libipw_priv(dev
);
1906 const struct libipw_geo
*geo
= libipw_get_geo(priv
->ieee
);
1907 struct wireless_dev
*wdev
= &priv
->ieee
->wdev
;
1910 memcpy(wdev
->wiphy
->perm_addr
, priv
->mac_addr
, ETH_ALEN
);
1912 /* fill-out priv->ieee->bg_band */
1913 if (geo
->bg_channels
) {
1914 struct ieee80211_supported_band
*bg_band
= &priv
->ieee
->bg_band
;
1916 bg_band
->band
= IEEE80211_BAND_2GHZ
;
1917 bg_band
->n_channels
= geo
->bg_channels
;
1918 bg_band
->channels
= kcalloc(geo
->bg_channels
,
1919 sizeof(struct ieee80211_channel
),
1921 if (!bg_band
->channels
) {
1925 /* translate geo->bg to bg_band.channels */
1926 for (i
= 0; i
< geo
->bg_channels
; i
++) {
1927 bg_band
->channels
[i
].band
= IEEE80211_BAND_2GHZ
;
1928 bg_band
->channels
[i
].center_freq
= geo
->bg
[i
].freq
;
1929 bg_band
->channels
[i
].hw_value
= geo
->bg
[i
].channel
;
1930 bg_band
->channels
[i
].max_power
= geo
->bg
[i
].max_power
;
1931 if (geo
->bg
[i
].flags
& LIBIPW_CH_PASSIVE_ONLY
)
1932 bg_band
->channels
[i
].flags
|=
1933 IEEE80211_CHAN_NO_IR
;
1934 if (geo
->bg
[i
].flags
& LIBIPW_CH_NO_IBSS
)
1935 bg_band
->channels
[i
].flags
|=
1936 IEEE80211_CHAN_NO_IR
;
1937 if (geo
->bg
[i
].flags
& LIBIPW_CH_RADAR_DETECT
)
1938 bg_band
->channels
[i
].flags
|=
1939 IEEE80211_CHAN_RADAR
;
1940 /* No equivalent for LIBIPW_CH_80211H_RULES,
1941 LIBIPW_CH_UNIFORM_SPREADING, or
1942 LIBIPW_CH_B_ONLY... */
1944 /* point at bitrate info */
1945 bg_band
->bitrates
= ipw2100_bg_rates
;
1946 bg_band
->n_bitrates
= RATE_COUNT
;
1948 wdev
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] = bg_band
;
1951 wdev
->wiphy
->cipher_suites
= ipw_cipher_suites
;
1952 wdev
->wiphy
->n_cipher_suites
= ARRAY_SIZE(ipw_cipher_suites
);
1954 set_wiphy_dev(wdev
->wiphy
, &priv
->pci_dev
->dev
);
1955 if (wiphy_register(wdev
->wiphy
))
1960 static void ipw2100_reset_adapter(struct work_struct
*work
)
1962 struct ipw2100_priv
*priv
=
1963 container_of(work
, struct ipw2100_priv
, reset_work
.work
);
1964 unsigned long flags
;
1965 union iwreq_data wrqu
= {
1967 .sa_family
= ARPHRD_ETHER
}
1969 int associated
= priv
->status
& STATUS_ASSOCIATED
;
1971 spin_lock_irqsave(&priv
->low_lock
, flags
);
1972 IPW_DEBUG_INFO(": %s: Restarting adapter.\n", priv
->net_dev
->name
);
1974 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1975 priv
->status
|= STATUS_SECURITY_UPDATED
;
1977 /* Force a power cycle even if interface hasn't been opened
1979 cancel_delayed_work(&priv
->reset_work
);
1980 priv
->status
|= STATUS_RESET_PENDING
;
1981 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1983 mutex_lock(&priv
->action_mutex
);
1984 /* stop timed checks so that they don't interfere with reset */
1985 priv
->stop_hang_check
= 1;
1986 cancel_delayed_work(&priv
->hang_check
);
1988 /* We have to signal any supplicant if we are disassociating */
1990 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
1992 ipw2100_up(priv
, 0);
1993 mutex_unlock(&priv
->action_mutex
);
1997 static void isr_indicate_associated(struct ipw2100_priv
*priv
, u32 status
)
2000 #define MAC_ASSOCIATION_READ_DELAY (HZ)
2002 unsigned int len
, essid_len
;
2003 char essid
[IW_ESSID_MAX_SIZE
];
2008 DECLARE_SSID_BUF(ssid
);
2011 * TBD: BSSID is usually 00:00:00:00:00:00 here and not
2012 * an actual MAC of the AP. Seems like FW sets this
2013 * address too late. Read it later and expose through
2014 * /proc or schedule a later task to query and update
2017 essid_len
= IW_ESSID_MAX_SIZE
;
2018 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_SSID
,
2021 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2027 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_CURRENT_TX_RATE
, &txrate
, &len
);
2029 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2035 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_OUR_FREQ
, &chan
, &len
);
2037 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2042 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
, bssid
,
2045 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2049 memcpy(priv
->ieee
->bssid
, bssid
, ETH_ALEN
);
2052 case TX_RATE_1_MBIT
:
2053 txratename
= "1Mbps";
2055 case TX_RATE_2_MBIT
:
2056 txratename
= "2Mbsp";
2058 case TX_RATE_5_5_MBIT
:
2059 txratename
= "5.5Mbps";
2061 case TX_RATE_11_MBIT
:
2062 txratename
= "11Mbps";
2065 IPW_DEBUG_INFO("Unknown rate: %d\n", txrate
);
2066 txratename
= "unknown rate";
2070 IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID=%pM)\n",
2071 priv
->net_dev
->name
, print_ssid(ssid
, essid
, essid_len
),
2072 txratename
, chan
, bssid
);
2074 /* now we copy read ssid into dev */
2075 if (!(priv
->config
& CFG_STATIC_ESSID
)) {
2076 priv
->essid_len
= min((u8
) essid_len
, (u8
) IW_ESSID_MAX_SIZE
);
2077 memcpy(priv
->essid
, essid
, priv
->essid_len
);
2079 priv
->channel
= chan
;
2080 memcpy(priv
->bssid
, bssid
, ETH_ALEN
);
2082 priv
->status
|= STATUS_ASSOCIATING
;
2083 priv
->connect_start
= get_seconds();
2085 schedule_delayed_work(&priv
->wx_event_work
, HZ
/ 10);
2088 static int ipw2100_set_essid(struct ipw2100_priv
*priv
, char *essid
,
2089 int length
, int batch_mode
)
2091 int ssid_len
= min(length
, IW_ESSID_MAX_SIZE
);
2092 struct host_command cmd
= {
2093 .host_command
= SSID
,
2094 .host_command_sequence
= 0,
2095 .host_command_length
= ssid_len
2098 DECLARE_SSID_BUF(ssid
);
2100 IPW_DEBUG_HC("SSID: '%s'\n", print_ssid(ssid
, essid
, ssid_len
));
2103 memcpy(cmd
.host_command_parameters
, essid
, ssid_len
);
2106 err
= ipw2100_disable_adapter(priv
);
2111 /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
2112 * disable auto association -- so we cheat by setting a bogus SSID */
2113 if (!ssid_len
&& !(priv
->config
& CFG_ASSOCIATE
)) {
2115 u8
*bogus
= (u8
*) cmd
.host_command_parameters
;
2116 for (i
= 0; i
< IW_ESSID_MAX_SIZE
; i
++)
2117 bogus
[i
] = 0x18 + i
;
2118 cmd
.host_command_length
= IW_ESSID_MAX_SIZE
;
2121 /* NOTE: We always send the SSID command even if the provided ESSID is
2122 * the same as what we currently think is set. */
2124 err
= ipw2100_hw_send_command(priv
, &cmd
);
2126 memset(priv
->essid
+ ssid_len
, 0, IW_ESSID_MAX_SIZE
- ssid_len
);
2127 memcpy(priv
->essid
, essid
, ssid_len
);
2128 priv
->essid_len
= ssid_len
;
2132 if (ipw2100_enable_adapter(priv
))
2139 static void isr_indicate_association_lost(struct ipw2100_priv
*priv
, u32 status
)
2141 DECLARE_SSID_BUF(ssid
);
2143 IPW_DEBUG(IPW_DL_NOTIF
| IPW_DL_STATE
| IPW_DL_ASSOC
,
2144 "disassociated: '%s' %pM\n",
2145 print_ssid(ssid
, priv
->essid
, priv
->essid_len
),
2148 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
2150 if (priv
->status
& STATUS_STOPPING
) {
2151 IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
2155 memset(priv
->bssid
, 0, ETH_ALEN
);
2156 memset(priv
->ieee
->bssid
, 0, ETH_ALEN
);
2158 netif_carrier_off(priv
->net_dev
);
2159 netif_stop_queue(priv
->net_dev
);
2161 if (!(priv
->status
& STATUS_RUNNING
))
2164 if (priv
->status
& STATUS_SECURITY_UPDATED
)
2165 schedule_delayed_work(&priv
->security_work
, 0);
2167 schedule_delayed_work(&priv
->wx_event_work
, 0);
2170 static void isr_indicate_rf_kill(struct ipw2100_priv
*priv
, u32 status
)
2172 IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
2173 priv
->net_dev
->name
);
2175 /* RF_KILL is now enabled (else we wouldn't be here) */
2176 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, true);
2177 priv
->status
|= STATUS_RF_KILL_HW
;
2179 /* Make sure the RF Kill check timer is running */
2180 priv
->stop_rf_kill
= 0;
2181 mod_delayed_work(system_wq
, &priv
->rf_kill
, round_jiffies_relative(HZ
));
2184 static void ipw2100_scan_event(struct work_struct
*work
)
2186 struct ipw2100_priv
*priv
= container_of(work
, struct ipw2100_priv
,
2188 union iwreq_data wrqu
;
2190 wrqu
.data
.length
= 0;
2191 wrqu
.data
.flags
= 0;
2192 wireless_send_event(priv
->net_dev
, SIOCGIWSCAN
, &wrqu
, NULL
);
2195 static void isr_scan_complete(struct ipw2100_priv
*priv
, u32 status
)
2197 IPW_DEBUG_SCAN("scan complete\n");
2198 /* Age the scan results... */
2199 priv
->ieee
->scans
++;
2200 priv
->status
&= ~STATUS_SCANNING
;
2202 /* Only userspace-requested scan completion events go out immediately */
2203 if (!priv
->user_requested_scan
) {
2204 schedule_delayed_work(&priv
->scan_event
,
2205 round_jiffies_relative(msecs_to_jiffies(4000)));
2207 priv
->user_requested_scan
= 0;
2208 mod_delayed_work(system_wq
, &priv
->scan_event
, 0);
2212 #ifdef CONFIG_IPW2100_DEBUG
2213 #define IPW2100_HANDLER(v, f) { v, f, # v }
2214 struct ipw2100_status_indicator
{
2216 void (*cb
) (struct ipw2100_priv
* priv
, u32 status
);
2220 #define IPW2100_HANDLER(v, f) { v, f }
2221 struct ipw2100_status_indicator
{
2223 void (*cb
) (struct ipw2100_priv
* priv
, u32 status
);
2225 #endif /* CONFIG_IPW2100_DEBUG */
2227 static void isr_indicate_scanning(struct ipw2100_priv
*priv
, u32 status
)
2229 IPW_DEBUG_SCAN("Scanning...\n");
2230 priv
->status
|= STATUS_SCANNING
;
2233 static const struct ipw2100_status_indicator status_handlers
[] = {
2234 IPW2100_HANDLER(IPW_STATE_INITIALIZED
, NULL
),
2235 IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND
, NULL
),
2236 IPW2100_HANDLER(IPW_STATE_ASSOCIATED
, isr_indicate_associated
),
2237 IPW2100_HANDLER(IPW_STATE_ASSN_LOST
, isr_indicate_association_lost
),
2238 IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED
, NULL
),
2239 IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE
, isr_scan_complete
),
2240 IPW2100_HANDLER(IPW_STATE_ENTERED_PSP
, NULL
),
2241 IPW2100_HANDLER(IPW_STATE_LEFT_PSP
, NULL
),
2242 IPW2100_HANDLER(IPW_STATE_RF_KILL
, isr_indicate_rf_kill
),
2243 IPW2100_HANDLER(IPW_STATE_DISABLED
, NULL
),
2244 IPW2100_HANDLER(IPW_STATE_POWER_DOWN
, NULL
),
2245 IPW2100_HANDLER(IPW_STATE_SCANNING
, isr_indicate_scanning
),
2246 IPW2100_HANDLER(-1, NULL
)
2249 static void isr_status_change(struct ipw2100_priv
*priv
, int status
)
2253 if (status
== IPW_STATE_SCANNING
&&
2254 priv
->status
& STATUS_ASSOCIATED
&&
2255 !(priv
->status
& STATUS_SCANNING
)) {
2256 IPW_DEBUG_INFO("Scan detected while associated, with "
2257 "no scan request. Restarting firmware.\n");
2259 /* Wake up any sleeping jobs */
2260 schedule_reset(priv
);
2263 for (i
= 0; status_handlers
[i
].status
!= -1; i
++) {
2264 if (status
== status_handlers
[i
].status
) {
2265 IPW_DEBUG_NOTIF("Status change: %s\n",
2266 status_handlers
[i
].name
);
2267 if (status_handlers
[i
].cb
)
2268 status_handlers
[i
].cb(priv
, status
);
2269 priv
->wstats
.status
= status
;
2274 IPW_DEBUG_NOTIF("unknown status received: %04x\n", status
);
2277 static void isr_rx_complete_command(struct ipw2100_priv
*priv
,
2278 struct ipw2100_cmd_header
*cmd
)
2280 #ifdef CONFIG_IPW2100_DEBUG
2281 if (cmd
->host_command_reg
< ARRAY_SIZE(command_types
)) {
2282 IPW_DEBUG_HC("Command completed '%s (%d)'\n",
2283 command_types
[cmd
->host_command_reg
],
2284 cmd
->host_command_reg
);
2287 if (cmd
->host_command_reg
== HOST_COMPLETE
)
2288 priv
->status
|= STATUS_ENABLED
;
2290 if (cmd
->host_command_reg
== CARD_DISABLE
)
2291 priv
->status
&= ~STATUS_ENABLED
;
2293 priv
->status
&= ~STATUS_CMD_ACTIVE
;
2295 wake_up_interruptible(&priv
->wait_command_queue
);
2298 #ifdef CONFIG_IPW2100_DEBUG
2299 static const char *frame_types
[] = {
2300 "COMMAND_STATUS_VAL",
2301 "STATUS_CHANGE_VAL",
2304 "HOST_NOTIFICATION_VAL"
2308 static int ipw2100_alloc_skb(struct ipw2100_priv
*priv
,
2309 struct ipw2100_rx_packet
*packet
)
2311 packet
->skb
= dev_alloc_skb(sizeof(struct ipw2100_rx
));
2315 packet
->rxp
= (struct ipw2100_rx
*)packet
->skb
->data
;
2316 packet
->dma_addr
= pci_map_single(priv
->pci_dev
, packet
->skb
->data
,
2317 sizeof(struct ipw2100_rx
),
2318 PCI_DMA_FROMDEVICE
);
2319 /* NOTE: pci_map_single does not return an error code, and 0 is a valid
2325 #define SEARCH_ERROR 0xffffffff
2326 #define SEARCH_FAIL 0xfffffffe
2327 #define SEARCH_SUCCESS 0xfffffff0
2328 #define SEARCH_DISCARD 0
2329 #define SEARCH_SNAPSHOT 1
2331 #define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
2332 static void ipw2100_snapshot_free(struct ipw2100_priv
*priv
)
2335 if (!priv
->snapshot
[0])
2337 for (i
= 0; i
< 0x30; i
++)
2338 kfree(priv
->snapshot
[i
]);
2339 priv
->snapshot
[0] = NULL
;
2342 #ifdef IPW2100_DEBUG_C3
2343 static int ipw2100_snapshot_alloc(struct ipw2100_priv
*priv
)
2346 if (priv
->snapshot
[0])
2348 for (i
= 0; i
< 0x30; i
++) {
2349 priv
->snapshot
[i
] = kmalloc(0x1000, GFP_ATOMIC
);
2350 if (!priv
->snapshot
[i
]) {
2351 IPW_DEBUG_INFO("%s: Error allocating snapshot "
2352 "buffer %d\n", priv
->net_dev
->name
, i
);
2354 kfree(priv
->snapshot
[--i
]);
2355 priv
->snapshot
[0] = NULL
;
2363 static u32
ipw2100_match_buf(struct ipw2100_priv
*priv
, u8
* in_buf
,
2364 size_t len
, int mode
)
2372 if (mode
== SEARCH_SNAPSHOT
) {
2373 if (!ipw2100_snapshot_alloc(priv
))
2374 mode
= SEARCH_DISCARD
;
2377 for (ret
= SEARCH_FAIL
, i
= 0; i
< 0x30000; i
+= 4) {
2378 read_nic_dword(priv
->net_dev
, i
, &tmp
);
2379 if (mode
== SEARCH_SNAPSHOT
)
2380 *(u32
*) SNAPSHOT_ADDR(i
) = tmp
;
2381 if (ret
== SEARCH_FAIL
) {
2383 for (j
= 0; j
< 4; j
++) {
2392 if ((s
- in_buf
) == len
)
2393 ret
= (i
+ j
) - len
+ 1;
2395 } else if (mode
== SEARCH_DISCARD
)
2405 * 0) Disconnect the SKB from the firmware (just unmap)
2406 * 1) Pack the ETH header into the SKB
2407 * 2) Pass the SKB to the network stack
2409 * When packet is provided by the firmware, it contains the following:
2414 * The size of the constructed ethernet
2417 #ifdef IPW2100_RX_DEBUG
2418 static u8 packet_data
[IPW_RX_NIC_BUFFER_LENGTH
];
2421 static void ipw2100_corruption_detected(struct ipw2100_priv
*priv
, int i
)
2423 #ifdef IPW2100_DEBUG_C3
2424 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2429 IPW_DEBUG_INFO(": PCI latency error detected at 0x%04zX.\n",
2430 i
* sizeof(struct ipw2100_status
));
2432 #ifdef IPW2100_DEBUG_C3
2433 /* Halt the firmware so we can get a good image */
2434 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
2435 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
2438 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY
);
2439 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
2441 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
2445 match
= ipw2100_match_buf(priv
, (u8
*) status
,
2446 sizeof(struct ipw2100_status
),
2448 if (match
< SEARCH_SUCCESS
)
2449 IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
2450 "offset 0x%06X, length %d:\n",
2451 priv
->net_dev
->name
, match
,
2452 sizeof(struct ipw2100_status
));
2454 IPW_DEBUG_INFO("%s: No DMA status match in "
2455 "Firmware.\n", priv
->net_dev
->name
);
2457 printk_buf((u8
*) priv
->status_queue
.drv
,
2458 sizeof(struct ipw2100_status
) * RX_QUEUE_LENGTH
);
2461 priv
->fatal_error
= IPW2100_ERR_C3_CORRUPTION
;
2462 priv
->net_dev
->stats
.rx_errors
++;
2463 schedule_reset(priv
);
2466 static void isr_rx(struct ipw2100_priv
*priv
, int i
,
2467 struct libipw_rx_stats
*stats
)
2469 struct net_device
*dev
= priv
->net_dev
;
2470 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2471 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
2473 IPW_DEBUG_RX("Handler...\n");
2475 if (unlikely(status
->frame_size
> skb_tailroom(packet
->skb
))) {
2476 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2479 status
->frame_size
, skb_tailroom(packet
->skb
));
2480 dev
->stats
.rx_errors
++;
2484 if (unlikely(!netif_running(dev
))) {
2485 dev
->stats
.rx_errors
++;
2486 priv
->wstats
.discard
.misc
++;
2487 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2491 if (unlikely(priv
->ieee
->iw_mode
!= IW_MODE_MONITOR
&&
2492 !(priv
->status
& STATUS_ASSOCIATED
))) {
2493 IPW_DEBUG_DROP("Dropping packet while not associated.\n");
2494 priv
->wstats
.discard
.misc
++;
2498 pci_unmap_single(priv
->pci_dev
,
2500 sizeof(struct ipw2100_rx
), PCI_DMA_FROMDEVICE
);
2502 skb_put(packet
->skb
, status
->frame_size
);
2504 #ifdef IPW2100_RX_DEBUG
2505 /* Make a copy of the frame so we can dump it to the logs if
2506 * libipw_rx fails */
2507 skb_copy_from_linear_data(packet
->skb
, packet_data
,
2508 min_t(u32
, status
->frame_size
,
2509 IPW_RX_NIC_BUFFER_LENGTH
));
2512 if (!libipw_rx(priv
->ieee
, packet
->skb
, stats
)) {
2513 #ifdef IPW2100_RX_DEBUG
2514 IPW_DEBUG_DROP("%s: Non consumed packet:\n",
2516 printk_buf(IPW_DL_DROP
, packet_data
, status
->frame_size
);
2518 dev
->stats
.rx_errors
++;
2520 /* libipw_rx failed, so it didn't free the SKB */
2521 dev_kfree_skb_any(packet
->skb
);
2525 /* We need to allocate a new SKB and attach it to the RDB. */
2526 if (unlikely(ipw2100_alloc_skb(priv
, packet
))) {
2527 printk(KERN_WARNING DRV_NAME
": "
2528 "%s: Unable to allocate SKB onto RBD ring - disabling "
2529 "adapter.\n", dev
->name
);
2530 /* TODO: schedule adapter shutdown */
2531 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2534 /* Update the RDB entry */
2535 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
2538 #ifdef CONFIG_IPW2100_MONITOR
2540 static void isr_rx_monitor(struct ipw2100_priv
*priv
, int i
,
2541 struct libipw_rx_stats
*stats
)
2543 struct net_device
*dev
= priv
->net_dev
;
2544 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2545 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
2547 /* Magic struct that slots into the radiotap header -- no reason
2548 * to build this manually element by element, we can write it much
2549 * more efficiently than we can parse it. ORDER MATTERS HERE */
2551 struct ieee80211_radiotap_header rt_hdr
;
2552 s8 rt_dbmsignal
; /* signal in dbM, kluged to signed */
2555 IPW_DEBUG_RX("Handler...\n");
2557 if (unlikely(status
->frame_size
> skb_tailroom(packet
->skb
) -
2558 sizeof(struct ipw_rt_hdr
))) {
2559 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2563 skb_tailroom(packet
->skb
));
2564 dev
->stats
.rx_errors
++;
2568 if (unlikely(!netif_running(dev
))) {
2569 dev
->stats
.rx_errors
++;
2570 priv
->wstats
.discard
.misc
++;
2571 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2575 if (unlikely(priv
->config
& CFG_CRC_CHECK
&&
2576 status
->flags
& IPW_STATUS_FLAG_CRC_ERROR
)) {
2577 IPW_DEBUG_RX("CRC error in packet. Dropping.\n");
2578 dev
->stats
.rx_errors
++;
2582 pci_unmap_single(priv
->pci_dev
, packet
->dma_addr
,
2583 sizeof(struct ipw2100_rx
), PCI_DMA_FROMDEVICE
);
2584 memmove(packet
->skb
->data
+ sizeof(struct ipw_rt_hdr
),
2585 packet
->skb
->data
, status
->frame_size
);
2587 ipw_rt
= (struct ipw_rt_hdr
*) packet
->skb
->data
;
2589 ipw_rt
->rt_hdr
.it_version
= PKTHDR_RADIOTAP_VERSION
;
2590 ipw_rt
->rt_hdr
.it_pad
= 0; /* always good to zero */
2591 ipw_rt
->rt_hdr
.it_len
= cpu_to_le16(sizeof(struct ipw_rt_hdr
)); /* total hdr+data */
2593 ipw_rt
->rt_hdr
.it_present
= cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL
);
2595 ipw_rt
->rt_dbmsignal
= status
->rssi
+ IPW2100_RSSI_TO_DBM
;
2597 skb_put(packet
->skb
, status
->frame_size
+ sizeof(struct ipw_rt_hdr
));
2599 if (!libipw_rx(priv
->ieee
, packet
->skb
, stats
)) {
2600 dev
->stats
.rx_errors
++;
2602 /* libipw_rx failed, so it didn't free the SKB */
2603 dev_kfree_skb_any(packet
->skb
);
2607 /* We need to allocate a new SKB and attach it to the RDB. */
2608 if (unlikely(ipw2100_alloc_skb(priv
, packet
))) {
2610 "%s: Unable to allocate SKB onto RBD ring - disabling "
2611 "adapter.\n", dev
->name
);
2612 /* TODO: schedule adapter shutdown */
2613 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2616 /* Update the RDB entry */
2617 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
2622 static int ipw2100_corruption_check(struct ipw2100_priv
*priv
, int i
)
2624 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2625 struct ipw2100_rx
*u
= priv
->rx_buffers
[i
].rxp
;
2626 u16 frame_type
= status
->status_fields
& STATUS_TYPE_MASK
;
2628 switch (frame_type
) {
2629 case COMMAND_STATUS_VAL
:
2630 return (status
->frame_size
!= sizeof(u
->rx_data
.command
));
2631 case STATUS_CHANGE_VAL
:
2632 return (status
->frame_size
!= sizeof(u
->rx_data
.status
));
2633 case HOST_NOTIFICATION_VAL
:
2634 return (status
->frame_size
< sizeof(u
->rx_data
.notification
));
2635 case P80211_DATA_VAL
:
2636 case P8023_DATA_VAL
:
2637 #ifdef CONFIG_IPW2100_MONITOR
2640 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u
->rx_data
.header
.frame_ctl
))) {
2641 case IEEE80211_FTYPE_MGMT
:
2642 case IEEE80211_FTYPE_CTL
:
2644 case IEEE80211_FTYPE_DATA
:
2645 return (status
->frame_size
>
2646 IPW_MAX_802_11_PAYLOAD_LENGTH
);
2655 * ipw2100 interrupts are disabled at this point, and the ISR
2656 * is the only code that calls this method. So, we do not need
2657 * to play with any locks.
2659 * RX Queue works as follows:
2661 * Read index - firmware places packet in entry identified by the
2662 * Read index and advances Read index. In this manner,
2663 * Read index will always point to the next packet to
2664 * be filled--but not yet valid.
2666 * Write index - driver fills this entry with an unused RBD entry.
2667 * This entry has not filled by the firmware yet.
2669 * In between the W and R indexes are the RBDs that have been received
2670 * but not yet processed.
2672 * The process of handling packets will start at WRITE + 1 and advance
2673 * until it reaches the READ index.
2675 * The WRITE index is cached in the variable 'priv->rx_queue.next'.
2678 static void __ipw2100_rx_process(struct ipw2100_priv
*priv
)
2680 struct ipw2100_bd_queue
*rxq
= &priv
->rx_queue
;
2681 struct ipw2100_status_queue
*sq
= &priv
->status_queue
;
2682 struct ipw2100_rx_packet
*packet
;
2685 struct ipw2100_rx
*u
;
2686 struct libipw_rx_stats stats
= {
2687 .mac_time
= jiffies
,
2690 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_READ_INDEX
, &r
);
2691 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
, &w
);
2693 if (r
>= rxq
->entries
) {
2694 IPW_DEBUG_RX("exit - bad read index\n");
2698 i
= (rxq
->next
+ 1) % rxq
->entries
;
2701 /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
2702 r, rxq->next, i); */
2704 packet
= &priv
->rx_buffers
[i
];
2706 /* Sync the DMA for the RX buffer so CPU is sure to get
2707 * the correct values */
2708 pci_dma_sync_single_for_cpu(priv
->pci_dev
, packet
->dma_addr
,
2709 sizeof(struct ipw2100_rx
),
2710 PCI_DMA_FROMDEVICE
);
2712 if (unlikely(ipw2100_corruption_check(priv
, i
))) {
2713 ipw2100_corruption_detected(priv
, i
);
2718 frame_type
= sq
->drv
[i
].status_fields
& STATUS_TYPE_MASK
;
2719 stats
.rssi
= sq
->drv
[i
].rssi
+ IPW2100_RSSI_TO_DBM
;
2720 stats
.len
= sq
->drv
[i
].frame_size
;
2723 if (stats
.rssi
!= 0)
2724 stats
.mask
|= LIBIPW_STATMASK_RSSI
;
2725 stats
.freq
= LIBIPW_24GHZ_BAND
;
2727 IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n",
2728 priv
->net_dev
->name
, frame_types
[frame_type
],
2731 switch (frame_type
) {
2732 case COMMAND_STATUS_VAL
:
2733 /* Reset Rx watchdog */
2734 isr_rx_complete_command(priv
, &u
->rx_data
.command
);
2737 case STATUS_CHANGE_VAL
:
2738 isr_status_change(priv
, u
->rx_data
.status
);
2741 case P80211_DATA_VAL
:
2742 case P8023_DATA_VAL
:
2743 #ifdef CONFIG_IPW2100_MONITOR
2744 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
2745 isr_rx_monitor(priv
, i
, &stats
);
2749 if (stats
.len
< sizeof(struct libipw_hdr_3addr
))
2751 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u
->rx_data
.header
.frame_ctl
))) {
2752 case IEEE80211_FTYPE_MGMT
:
2753 libipw_rx_mgt(priv
->ieee
,
2754 &u
->rx_data
.header
, &stats
);
2757 case IEEE80211_FTYPE_CTL
:
2760 case IEEE80211_FTYPE_DATA
:
2761 isr_rx(priv
, i
, &stats
);
2769 /* clear status field associated with this RBD */
2770 rxq
->drv
[i
].status
.info
.field
= 0;
2772 i
= (i
+ 1) % rxq
->entries
;
2776 /* backtrack one entry, wrapping to end if at 0 */
2777 rxq
->next
= (i
? i
: rxq
->entries
) - 1;
2779 write_register(priv
->net_dev
,
2780 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
, rxq
->next
);
2785 * __ipw2100_tx_process
2787 * This routine will determine whether the next packet on
2788 * the fw_pend_list has been processed by the firmware yet.
2790 * If not, then it does nothing and returns.
2792 * If so, then it removes the item from the fw_pend_list, frees
2793 * any associated storage, and places the item back on the
2794 * free list of its source (either msg_free_list or tx_free_list)
2796 * TX Queue works as follows:
2798 * Read index - points to the next TBD that the firmware will
2799 * process. The firmware will read the data, and once
2800 * done processing, it will advance the Read index.
2802 * Write index - driver fills this entry with an constructed TBD
2803 * entry. The Write index is not advanced until the
2804 * packet has been configured.
2806 * In between the W and R indexes are the TBDs that have NOT been
2807 * processed. Lagging behind the R index are packets that have
2808 * been processed but have not been freed by the driver.
2810 * In order to free old storage, an internal index will be maintained
2811 * that points to the next packet to be freed. When all used
2812 * packets have been freed, the oldest index will be the same as the
2813 * firmware's read index.
2815 * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
2817 * Because the TBD structure can not contain arbitrary data, the
2818 * driver must keep an internal queue of cached allocations such that
2819 * it can put that data back into the tx_free_list and msg_free_list
2820 * for use by future command and data packets.
2823 static int __ipw2100_tx_process(struct ipw2100_priv
*priv
)
2825 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
2826 struct ipw2100_bd
*tbd
;
2827 struct list_head
*element
;
2828 struct ipw2100_tx_packet
*packet
;
2829 int descriptors_used
;
2831 u32 r
, w
, frag_num
= 0;
2833 if (list_empty(&priv
->fw_pend_list
))
2836 element
= priv
->fw_pend_list
.next
;
2838 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
2839 tbd
= &txq
->drv
[packet
->index
];
2841 /* Determine how many TBD entries must be finished... */
2842 switch (packet
->type
) {
2844 /* COMMAND uses only one slot; don't advance */
2845 descriptors_used
= 1;
2850 /* DATA uses two slots; advance and loop position. */
2851 descriptors_used
= tbd
->num_fragments
;
2852 frag_num
= tbd
->num_fragments
- 1;
2853 e
= txq
->oldest
+ frag_num
;
2858 printk(KERN_WARNING DRV_NAME
": %s: Bad fw_pend_list entry!\n",
2859 priv
->net_dev
->name
);
2863 /* if the last TBD is not done by NIC yet, then packet is
2864 * not ready to be released.
2867 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX
,
2869 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
2872 printk(KERN_WARNING DRV_NAME
": %s: write index mismatch\n",
2873 priv
->net_dev
->name
);
2876 * txq->next is the index of the last packet written txq->oldest is
2877 * the index of the r is the index of the next packet to be read by
2882 * Quick graphic to help you visualize the following
2883 * if / else statement
2885 * ===>| s---->|===============
2887 * | a | b | c | d | e | f | g | h | i | j | k | l
2891 * w - updated by driver
2892 * r - updated by firmware
2893 * s - start of oldest BD entry (txq->oldest)
2894 * e - end of oldest BD entry
2897 if (!((r
<= w
&& (e
< r
|| e
>= w
)) || (e
< r
&& e
>= w
))) {
2898 IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
2903 DEC_STAT(&priv
->fw_pend_stat
);
2905 #ifdef CONFIG_IPW2100_DEBUG
2908 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i
,
2910 (u32
) (txq
->nic
+ i
* sizeof(struct ipw2100_bd
)),
2911 txq
->drv
[i
].host_addr
, txq
->drv
[i
].buf_length
);
2913 if (packet
->type
== DATA
) {
2914 i
= (i
+ 1) % txq
->entries
;
2916 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i
,
2918 (u32
) (txq
->nic
+ i
*
2919 sizeof(struct ipw2100_bd
)),
2920 (u32
) txq
->drv
[i
].host_addr
,
2921 txq
->drv
[i
].buf_length
);
2926 switch (packet
->type
) {
2928 if (txq
->drv
[txq
->oldest
].status
.info
.fields
.txType
!= 0)
2929 printk(KERN_WARNING DRV_NAME
": %s: Queue mismatch. "
2930 "Expecting DATA TBD but pulled "
2931 "something else: ids %d=%d.\n",
2932 priv
->net_dev
->name
, txq
->oldest
, packet
->index
);
2934 /* DATA packet; we have to unmap and free the SKB */
2935 for (i
= 0; i
< frag_num
; i
++) {
2936 tbd
= &txq
->drv
[(packet
->index
+ 1 + i
) % txq
->entries
];
2938 IPW_DEBUG_TX("TX%d P=%08x L=%d\n",
2939 (packet
->index
+ 1 + i
) % txq
->entries
,
2940 tbd
->host_addr
, tbd
->buf_length
);
2942 pci_unmap_single(priv
->pci_dev
,
2944 tbd
->buf_length
, PCI_DMA_TODEVICE
);
2947 libipw_txb_free(packet
->info
.d_struct
.txb
);
2948 packet
->info
.d_struct
.txb
= NULL
;
2950 list_add_tail(element
, &priv
->tx_free_list
);
2951 INC_STAT(&priv
->tx_free_stat
);
2953 /* We have a free slot in the Tx queue, so wake up the
2954 * transmit layer if it is stopped. */
2955 if (priv
->status
& STATUS_ASSOCIATED
)
2956 netif_wake_queue(priv
->net_dev
);
2958 /* A packet was processed by the hardware, so update the
2960 priv
->net_dev
->trans_start
= jiffies
;
2965 if (txq
->drv
[txq
->oldest
].status
.info
.fields
.txType
!= 1)
2966 printk(KERN_WARNING DRV_NAME
": %s: Queue mismatch. "
2967 "Expecting COMMAND TBD but pulled "
2968 "something else: ids %d=%d.\n",
2969 priv
->net_dev
->name
, txq
->oldest
, packet
->index
);
2971 #ifdef CONFIG_IPW2100_DEBUG
2972 if (packet
->info
.c_struct
.cmd
->host_command_reg
<
2973 ARRAY_SIZE(command_types
))
2974 IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n",
2975 command_types
[packet
->info
.c_struct
.cmd
->
2977 packet
->info
.c_struct
.cmd
->
2979 packet
->info
.c_struct
.cmd
->cmd_status_reg
);
2982 list_add_tail(element
, &priv
->msg_free_list
);
2983 INC_STAT(&priv
->msg_free_stat
);
2987 /* advance oldest used TBD pointer to start of next entry */
2988 txq
->oldest
= (e
+ 1) % txq
->entries
;
2989 /* increase available TBDs number */
2990 txq
->available
+= descriptors_used
;
2991 SET_STAT(&priv
->txq_stat
, txq
->available
);
2993 IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n",
2994 jiffies
- packet
->jiffy_start
);
2996 return (!list_empty(&priv
->fw_pend_list
));
2999 static inline void __ipw2100_tx_complete(struct ipw2100_priv
*priv
)
3003 while (__ipw2100_tx_process(priv
) && i
< 200)
3007 printk(KERN_WARNING DRV_NAME
": "
3008 "%s: Driver is running slow (%d iters).\n",
3009 priv
->net_dev
->name
, i
);
3013 static void ipw2100_tx_send_commands(struct ipw2100_priv
*priv
)
3015 struct list_head
*element
;
3016 struct ipw2100_tx_packet
*packet
;
3017 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
3018 struct ipw2100_bd
*tbd
;
3019 int next
= txq
->next
;
3021 while (!list_empty(&priv
->msg_pend_list
)) {
3022 /* if there isn't enough space in TBD queue, then
3023 * don't stuff a new one in.
3024 * NOTE: 3 are needed as a command will take one,
3025 * and there is a minimum of 2 that must be
3026 * maintained between the r and w indexes
3028 if (txq
->available
<= 3) {
3029 IPW_DEBUG_TX("no room in tx_queue\n");
3033 element
= priv
->msg_pend_list
.next
;
3035 DEC_STAT(&priv
->msg_pend_stat
);
3037 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3039 IPW_DEBUG_TX("using TBD at virt=%p, phys=%04X\n",
3040 &txq
->drv
[txq
->next
],
3041 (u32
) (txq
->nic
+ txq
->next
*
3042 sizeof(struct ipw2100_bd
)));
3044 packet
->index
= txq
->next
;
3046 tbd
= &txq
->drv
[txq
->next
];
3048 /* initialize TBD */
3049 tbd
->host_addr
= packet
->info
.c_struct
.cmd_phys
;
3050 tbd
->buf_length
= sizeof(struct ipw2100_cmd_header
);
3051 /* not marking number of fragments causes problems
3052 * with f/w debug version */
3053 tbd
->num_fragments
= 1;
3054 tbd
->status
.info
.field
=
3055 IPW_BD_STATUS_TX_FRAME_COMMAND
|
3056 IPW_BD_STATUS_TX_INTERRUPT_ENABLE
;
3058 /* update TBD queue counters */
3060 txq
->next
%= txq
->entries
;
3062 DEC_STAT(&priv
->txq_stat
);
3064 list_add_tail(element
, &priv
->fw_pend_list
);
3065 INC_STAT(&priv
->fw_pend_stat
);
3068 if (txq
->next
!= next
) {
3069 /* kick off the DMA by notifying firmware the
3070 * write index has moved; make sure TBD stores are sync'd */
3072 write_register(priv
->net_dev
,
3073 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
3079 * ipw2100_tx_send_data
3082 static void ipw2100_tx_send_data(struct ipw2100_priv
*priv
)
3084 struct list_head
*element
;
3085 struct ipw2100_tx_packet
*packet
;
3086 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
3087 struct ipw2100_bd
*tbd
;
3088 int next
= txq
->next
;
3090 struct ipw2100_data_header
*ipw_hdr
;
3091 struct libipw_hdr_3addr
*hdr
;
3093 while (!list_empty(&priv
->tx_pend_list
)) {
3094 /* if there isn't enough space in TBD queue, then
3095 * don't stuff a new one in.
3096 * NOTE: 4 are needed as a data will take two,
3097 * and there is a minimum of 2 that must be
3098 * maintained between the r and w indexes
3100 element
= priv
->tx_pend_list
.next
;
3101 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3103 if (unlikely(1 + packet
->info
.d_struct
.txb
->nr_frags
>
3105 /* TODO: Support merging buffers if more than
3106 * IPW_MAX_BDS are used */
3107 IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. "
3108 "Increase fragmentation level.\n",
3109 priv
->net_dev
->name
);
3112 if (txq
->available
<= 3 + packet
->info
.d_struct
.txb
->nr_frags
) {
3113 IPW_DEBUG_TX("no room in tx_queue\n");
3118 DEC_STAT(&priv
->tx_pend_stat
);
3120 tbd
= &txq
->drv
[txq
->next
];
3122 packet
->index
= txq
->next
;
3124 ipw_hdr
= packet
->info
.d_struct
.data
;
3125 hdr
= (struct libipw_hdr_3addr
*)packet
->info
.d_struct
.txb
->
3128 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
) {
3129 /* To DS: Addr1 = BSSID, Addr2 = SA,
3131 memcpy(ipw_hdr
->src_addr
, hdr
->addr2
, ETH_ALEN
);
3132 memcpy(ipw_hdr
->dst_addr
, hdr
->addr3
, ETH_ALEN
);
3133 } else if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
3134 /* not From/To DS: Addr1 = DA, Addr2 = SA,
3136 memcpy(ipw_hdr
->src_addr
, hdr
->addr2
, ETH_ALEN
);
3137 memcpy(ipw_hdr
->dst_addr
, hdr
->addr1
, ETH_ALEN
);
3140 ipw_hdr
->host_command_reg
= SEND
;
3141 ipw_hdr
->host_command_reg1
= 0;
3143 /* For now we only support host based encryption */
3144 ipw_hdr
->needs_encryption
= 0;
3145 ipw_hdr
->encrypted
= packet
->info
.d_struct
.txb
->encrypted
;
3146 if (packet
->info
.d_struct
.txb
->nr_frags
> 1)
3147 ipw_hdr
->fragment_size
=
3148 packet
->info
.d_struct
.txb
->frag_size
-
3151 ipw_hdr
->fragment_size
= 0;
3153 tbd
->host_addr
= packet
->info
.d_struct
.data_phys
;
3154 tbd
->buf_length
= sizeof(struct ipw2100_data_header
);
3155 tbd
->num_fragments
= 1 + packet
->info
.d_struct
.txb
->nr_frags
;
3156 tbd
->status
.info
.field
=
3157 IPW_BD_STATUS_TX_FRAME_802_3
|
3158 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT
;
3160 txq
->next
%= txq
->entries
;
3162 IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n",
3163 packet
->index
, tbd
->host_addr
, tbd
->buf_length
);
3164 #ifdef CONFIG_IPW2100_DEBUG
3165 if (packet
->info
.d_struct
.txb
->nr_frags
> 1)
3166 IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
3167 packet
->info
.d_struct
.txb
->nr_frags
);
3170 for (i
= 0; i
< packet
->info
.d_struct
.txb
->nr_frags
; i
++) {
3171 tbd
= &txq
->drv
[txq
->next
];
3172 if (i
== packet
->info
.d_struct
.txb
->nr_frags
- 1)
3173 tbd
->status
.info
.field
=
3174 IPW_BD_STATUS_TX_FRAME_802_3
|
3175 IPW_BD_STATUS_TX_INTERRUPT_ENABLE
;
3177 tbd
->status
.info
.field
=
3178 IPW_BD_STATUS_TX_FRAME_802_3
|
3179 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT
;
3181 tbd
->buf_length
= packet
->info
.d_struct
.txb
->
3182 fragments
[i
]->len
- LIBIPW_3ADDR_LEN
;
3184 tbd
->host_addr
= pci_map_single(priv
->pci_dev
,
3185 packet
->info
.d_struct
.
3192 IPW_DEBUG_TX("data frag tbd TX%d P=%08x L=%d\n",
3193 txq
->next
, tbd
->host_addr
,
3196 pci_dma_sync_single_for_device(priv
->pci_dev
,
3202 txq
->next
%= txq
->entries
;
3205 txq
->available
-= 1 + packet
->info
.d_struct
.txb
->nr_frags
;
3206 SET_STAT(&priv
->txq_stat
, txq
->available
);
3208 list_add_tail(element
, &priv
->fw_pend_list
);
3209 INC_STAT(&priv
->fw_pend_stat
);
3212 if (txq
->next
!= next
) {
3213 /* kick off the DMA by notifying firmware the
3214 * write index has moved; make sure TBD stores are sync'd */
3215 write_register(priv
->net_dev
,
3216 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
3221 static void ipw2100_irq_tasklet(struct ipw2100_priv
*priv
)
3223 struct net_device
*dev
= priv
->net_dev
;
3224 unsigned long flags
;
3227 spin_lock_irqsave(&priv
->low_lock
, flags
);
3228 ipw2100_disable_interrupts(priv
);
3230 read_register(dev
, IPW_REG_INTA
, &inta
);
3232 IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
3233 (unsigned long)inta
& IPW_INTERRUPT_MASK
);
3238 /* We do not loop and keep polling for more interrupts as this
3239 * is frowned upon and doesn't play nicely with other potentially
3241 IPW_DEBUG_ISR("INTA: 0x%08lX\n",
3242 (unsigned long)inta
& IPW_INTERRUPT_MASK
);
3244 if (inta
& IPW2100_INTA_FATAL_ERROR
) {
3245 printk(KERN_WARNING DRV_NAME
3246 ": Fatal interrupt. Scheduling firmware restart.\n");
3248 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_FATAL_ERROR
);
3250 read_nic_dword(dev
, IPW_NIC_FATAL_ERROR
, &priv
->fatal_error
);
3251 IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
3252 priv
->net_dev
->name
, priv
->fatal_error
);
3254 read_nic_dword(dev
, IPW_ERROR_ADDR(priv
->fatal_error
), &tmp
);
3255 IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
3256 priv
->net_dev
->name
, tmp
);
3258 /* Wake up any sleeping jobs */
3259 schedule_reset(priv
);
3262 if (inta
& IPW2100_INTA_PARITY_ERROR
) {
3263 printk(KERN_ERR DRV_NAME
3264 ": ***** PARITY ERROR INTERRUPT !!!!\n");
3266 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_PARITY_ERROR
);
3269 if (inta
& IPW2100_INTA_RX_TRANSFER
) {
3270 IPW_DEBUG_ISR("RX interrupt\n");
3272 priv
->rx_interrupts
++;
3274 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_RX_TRANSFER
);
3276 __ipw2100_rx_process(priv
);
3277 __ipw2100_tx_complete(priv
);
3280 if (inta
& IPW2100_INTA_TX_TRANSFER
) {
3281 IPW_DEBUG_ISR("TX interrupt\n");
3283 priv
->tx_interrupts
++;
3285 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_TX_TRANSFER
);
3287 __ipw2100_tx_complete(priv
);
3288 ipw2100_tx_send_commands(priv
);
3289 ipw2100_tx_send_data(priv
);
3292 if (inta
& IPW2100_INTA_TX_COMPLETE
) {
3293 IPW_DEBUG_ISR("TX complete\n");
3295 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_TX_COMPLETE
);
3297 __ipw2100_tx_complete(priv
);
3300 if (inta
& IPW2100_INTA_EVENT_INTERRUPT
) {
3301 /* ipw2100_handle_event(dev); */
3303 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_EVENT_INTERRUPT
);
3306 if (inta
& IPW2100_INTA_FW_INIT_DONE
) {
3307 IPW_DEBUG_ISR("FW init done interrupt\n");
3310 read_register(dev
, IPW_REG_INTA
, &tmp
);
3311 if (tmp
& (IPW2100_INTA_FATAL_ERROR
|
3312 IPW2100_INTA_PARITY_ERROR
)) {
3313 write_register(dev
, IPW_REG_INTA
,
3314 IPW2100_INTA_FATAL_ERROR
|
3315 IPW2100_INTA_PARITY_ERROR
);
3318 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_FW_INIT_DONE
);
3321 if (inta
& IPW2100_INTA_STATUS_CHANGE
) {
3322 IPW_DEBUG_ISR("Status change interrupt\n");
3324 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_STATUS_CHANGE
);
3327 if (inta
& IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE
) {
3328 IPW_DEBUG_ISR("slave host mode interrupt\n");
3330 write_register(dev
, IPW_REG_INTA
,
3331 IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE
);
3335 ipw2100_enable_interrupts(priv
);
3337 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3339 IPW_DEBUG_ISR("exit\n");
3342 static irqreturn_t
ipw2100_interrupt(int irq
, void *data
)
3344 struct ipw2100_priv
*priv
= data
;
3345 u32 inta
, inta_mask
;
3350 spin_lock(&priv
->low_lock
);
3352 /* We check to see if we should be ignoring interrupts before
3353 * we touch the hardware. During ucode load if we try and handle
3354 * an interrupt we can cause keyboard problems as well as cause
3355 * the ucode to fail to initialize */
3356 if (!(priv
->status
& STATUS_INT_ENABLED
)) {
3361 read_register(priv
->net_dev
, IPW_REG_INTA_MASK
, &inta_mask
);
3362 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
3364 if (inta
== 0xFFFFFFFF) {
3365 /* Hardware disappeared */
3366 printk(KERN_WARNING DRV_NAME
": IRQ INTA == 0xFFFFFFFF\n");
3370 inta
&= IPW_INTERRUPT_MASK
;
3372 if (!(inta
& inta_mask
)) {
3373 /* Shared interrupt */
3377 /* We disable the hardware interrupt here just to prevent unneeded
3378 * calls to be made. We disable this again within the actual
3379 * work tasklet, so if another part of the code re-enables the
3380 * interrupt, that is fine */
3381 ipw2100_disable_interrupts(priv
);
3383 tasklet_schedule(&priv
->irq_tasklet
);
3384 spin_unlock(&priv
->low_lock
);
3388 spin_unlock(&priv
->low_lock
);
3392 static netdev_tx_t
ipw2100_tx(struct libipw_txb
*txb
,
3393 struct net_device
*dev
, int pri
)
3395 struct ipw2100_priv
*priv
= libipw_priv(dev
);
3396 struct list_head
*element
;
3397 struct ipw2100_tx_packet
*packet
;
3398 unsigned long flags
;
3400 spin_lock_irqsave(&priv
->low_lock
, flags
);
3402 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
3403 IPW_DEBUG_INFO("Can not transmit when not connected.\n");
3404 priv
->net_dev
->stats
.tx_carrier_errors
++;
3405 netif_stop_queue(dev
);
3409 if (list_empty(&priv
->tx_free_list
))
3412 element
= priv
->tx_free_list
.next
;
3413 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3415 packet
->info
.d_struct
.txb
= txb
;
3417 IPW_DEBUG_TX("Sending fragment (%d bytes):\n", txb
->fragments
[0]->len
);
3418 printk_buf(IPW_DL_TX
, txb
->fragments
[0]->data
, txb
->fragments
[0]->len
);
3420 packet
->jiffy_start
= jiffies
;
3423 DEC_STAT(&priv
->tx_free_stat
);
3425 list_add_tail(element
, &priv
->tx_pend_list
);
3426 INC_STAT(&priv
->tx_pend_stat
);
3428 ipw2100_tx_send_data(priv
);
3430 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3431 return NETDEV_TX_OK
;
3434 netif_stop_queue(dev
);
3435 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3436 return NETDEV_TX_BUSY
;
3439 static int ipw2100_msg_allocate(struct ipw2100_priv
*priv
)
3441 int i
, j
, err
= -EINVAL
;
3446 kmalloc(IPW_COMMAND_POOL_SIZE
* sizeof(struct ipw2100_tx_packet
),
3448 if (!priv
->msg_buffers
)
3451 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++) {
3452 v
= pci_zalloc_consistent(priv
->pci_dev
,
3453 sizeof(struct ipw2100_cmd_header
),
3456 printk(KERN_ERR DRV_NAME
": "
3457 "%s: PCI alloc failed for msg "
3458 "buffers.\n", priv
->net_dev
->name
);
3463 priv
->msg_buffers
[i
].type
= COMMAND
;
3464 priv
->msg_buffers
[i
].info
.c_struct
.cmd
=
3465 (struct ipw2100_cmd_header
*)v
;
3466 priv
->msg_buffers
[i
].info
.c_struct
.cmd_phys
= p
;
3469 if (i
== IPW_COMMAND_POOL_SIZE
)
3472 for (j
= 0; j
< i
; j
++) {
3473 pci_free_consistent(priv
->pci_dev
,
3474 sizeof(struct ipw2100_cmd_header
),
3475 priv
->msg_buffers
[j
].info
.c_struct
.cmd
,
3476 priv
->msg_buffers
[j
].info
.c_struct
.
3480 kfree(priv
->msg_buffers
);
3481 priv
->msg_buffers
= NULL
;
3486 static int ipw2100_msg_initialize(struct ipw2100_priv
*priv
)
3490 INIT_LIST_HEAD(&priv
->msg_free_list
);
3491 INIT_LIST_HEAD(&priv
->msg_pend_list
);
3493 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++)
3494 list_add_tail(&priv
->msg_buffers
[i
].list
, &priv
->msg_free_list
);
3495 SET_STAT(&priv
->msg_free_stat
, i
);
3500 static void ipw2100_msg_free(struct ipw2100_priv
*priv
)
3504 if (!priv
->msg_buffers
)
3507 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++) {
3508 pci_free_consistent(priv
->pci_dev
,
3509 sizeof(struct ipw2100_cmd_header
),
3510 priv
->msg_buffers
[i
].info
.c_struct
.cmd
,
3511 priv
->msg_buffers
[i
].info
.c_struct
.
3515 kfree(priv
->msg_buffers
);
3516 priv
->msg_buffers
= NULL
;
3519 static ssize_t
show_pci(struct device
*d
, struct device_attribute
*attr
,
3522 struct pci_dev
*pci_dev
= container_of(d
, struct pci_dev
, dev
);
3527 for (i
= 0; i
< 16; i
++) {
3528 out
+= sprintf(out
, "[%08X] ", i
* 16);
3529 for (j
= 0; j
< 16; j
+= 4) {
3530 pci_read_config_dword(pci_dev
, i
* 16 + j
, &val
);
3531 out
+= sprintf(out
, "%08X ", val
);
3533 out
+= sprintf(out
, "\n");
3539 static DEVICE_ATTR(pci
, S_IRUGO
, show_pci
, NULL
);
3541 static ssize_t
show_cfg(struct device
*d
, struct device_attribute
*attr
,
3544 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3545 return sprintf(buf
, "0x%08x\n", (int)p
->config
);
3548 static DEVICE_ATTR(cfg
, S_IRUGO
, show_cfg
, NULL
);
3550 static ssize_t
show_status(struct device
*d
, struct device_attribute
*attr
,
3553 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3554 return sprintf(buf
, "0x%08x\n", (int)p
->status
);
3557 static DEVICE_ATTR(status
, S_IRUGO
, show_status
, NULL
);
3559 static ssize_t
show_capability(struct device
*d
, struct device_attribute
*attr
,
3562 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3563 return sprintf(buf
, "0x%08x\n", (int)p
->capability
);
3566 static DEVICE_ATTR(capability
, S_IRUGO
, show_capability
, NULL
);
3568 #define IPW2100_REG(x) { IPW_ ##x, #x }
3569 static const struct {
3573 IPW2100_REG(REG_GP_CNTRL
),
3574 IPW2100_REG(REG_GPIO
),
3575 IPW2100_REG(REG_INTA
),
3576 IPW2100_REG(REG_INTA_MASK
), IPW2100_REG(REG_RESET_REG
),};
3577 #define IPW2100_NIC(x, s) { x, #x, s }
3578 static const struct {
3583 IPW2100_NIC(IPW2100_CONTROL_REG
, 2),
3584 IPW2100_NIC(0x210014, 1), IPW2100_NIC(0x210000, 1),};
3585 #define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
3586 static const struct {
3591 IPW2100_ORD(STAT_TX_HOST_REQUESTS
, "requested Host Tx's (MSDU)"),
3592 IPW2100_ORD(STAT_TX_HOST_COMPLETE
,
3593 "successful Host Tx's (MSDU)"),
3594 IPW2100_ORD(STAT_TX_DIR_DATA
,
3595 "successful Directed Tx's (MSDU)"),
3596 IPW2100_ORD(STAT_TX_DIR_DATA1
,
3597 "successful Directed Tx's (MSDU) @ 1MB"),
3598 IPW2100_ORD(STAT_TX_DIR_DATA2
,
3599 "successful Directed Tx's (MSDU) @ 2MB"),
3600 IPW2100_ORD(STAT_TX_DIR_DATA5_5
,
3601 "successful Directed Tx's (MSDU) @ 5_5MB"),
3602 IPW2100_ORD(STAT_TX_DIR_DATA11
,
3603 "successful Directed Tx's (MSDU) @ 11MB"),
3604 IPW2100_ORD(STAT_TX_NODIR_DATA1
,
3605 "successful Non_Directed Tx's (MSDU) @ 1MB"),
3606 IPW2100_ORD(STAT_TX_NODIR_DATA2
,
3607 "successful Non_Directed Tx's (MSDU) @ 2MB"),
3608 IPW2100_ORD(STAT_TX_NODIR_DATA5_5
,
3609 "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
3610 IPW2100_ORD(STAT_TX_NODIR_DATA11
,
3611 "successful Non_Directed Tx's (MSDU) @ 11MB"),
3612 IPW2100_ORD(STAT_NULL_DATA
, "successful NULL data Tx's"),
3613 IPW2100_ORD(STAT_TX_RTS
, "successful Tx RTS"),
3614 IPW2100_ORD(STAT_TX_CTS
, "successful Tx CTS"),
3615 IPW2100_ORD(STAT_TX_ACK
, "successful Tx ACK"),
3616 IPW2100_ORD(STAT_TX_ASSN
, "successful Association Tx's"),
3617 IPW2100_ORD(STAT_TX_ASSN_RESP
,
3618 "successful Association response Tx's"),
3619 IPW2100_ORD(STAT_TX_REASSN
,
3620 "successful Reassociation Tx's"),
3621 IPW2100_ORD(STAT_TX_REASSN_RESP
,
3622 "successful Reassociation response Tx's"),
3623 IPW2100_ORD(STAT_TX_PROBE
,
3624 "probes successfully transmitted"),
3625 IPW2100_ORD(STAT_TX_PROBE_RESP
,
3626 "probe responses successfully transmitted"),
3627 IPW2100_ORD(STAT_TX_BEACON
, "tx beacon"),
3628 IPW2100_ORD(STAT_TX_ATIM
, "Tx ATIM"),
3629 IPW2100_ORD(STAT_TX_DISASSN
,
3630 "successful Disassociation TX"),
3631 IPW2100_ORD(STAT_TX_AUTH
, "successful Authentication Tx"),
3632 IPW2100_ORD(STAT_TX_DEAUTH
,
3633 "successful Deauthentication TX"),
3634 IPW2100_ORD(STAT_TX_TOTAL_BYTES
,
3635 "Total successful Tx data bytes"),
3636 IPW2100_ORD(STAT_TX_RETRIES
, "Tx retries"),
3637 IPW2100_ORD(STAT_TX_RETRY1
, "Tx retries at 1MBPS"),
3638 IPW2100_ORD(STAT_TX_RETRY2
, "Tx retries at 2MBPS"),
3639 IPW2100_ORD(STAT_TX_RETRY5_5
, "Tx retries at 5.5MBPS"),
3640 IPW2100_ORD(STAT_TX_RETRY11
, "Tx retries at 11MBPS"),
3641 IPW2100_ORD(STAT_TX_FAILURES
, "Tx Failures"),
3642 IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP
,
3643 "times max tries in a hop failed"),
3644 IPW2100_ORD(STAT_TX_DISASSN_FAIL
,
3645 "times disassociation failed"),
3646 IPW2100_ORD(STAT_TX_ERR_CTS
, "missed/bad CTS frames"),
3647 IPW2100_ORD(STAT_TX_ERR_ACK
, "tx err due to acks"),
3648 IPW2100_ORD(STAT_RX_HOST
, "packets passed to host"),
3649 IPW2100_ORD(STAT_RX_DIR_DATA
, "directed packets"),
3650 IPW2100_ORD(STAT_RX_DIR_DATA1
, "directed packets at 1MB"),
3651 IPW2100_ORD(STAT_RX_DIR_DATA2
, "directed packets at 2MB"),
3652 IPW2100_ORD(STAT_RX_DIR_DATA5_5
,
3653 "directed packets at 5.5MB"),
3654 IPW2100_ORD(STAT_RX_DIR_DATA11
, "directed packets at 11MB"),
3655 IPW2100_ORD(STAT_RX_NODIR_DATA
, "nondirected packets"),
3656 IPW2100_ORD(STAT_RX_NODIR_DATA1
,
3657 "nondirected packets at 1MB"),
3658 IPW2100_ORD(STAT_RX_NODIR_DATA2
,
3659 "nondirected packets at 2MB"),
3660 IPW2100_ORD(STAT_RX_NODIR_DATA5_5
,
3661 "nondirected packets at 5.5MB"),
3662 IPW2100_ORD(STAT_RX_NODIR_DATA11
,
3663 "nondirected packets at 11MB"),
3664 IPW2100_ORD(STAT_RX_NULL_DATA
, "null data rx's"),
3665 IPW2100_ORD(STAT_RX_RTS
, "Rx RTS"), IPW2100_ORD(STAT_RX_CTS
,
3667 IPW2100_ORD(STAT_RX_ACK
, "Rx ACK"),
3668 IPW2100_ORD(STAT_RX_CFEND
, "Rx CF End"),
3669 IPW2100_ORD(STAT_RX_CFEND_ACK
, "Rx CF End + CF Ack"),
3670 IPW2100_ORD(STAT_RX_ASSN
, "Association Rx's"),
3671 IPW2100_ORD(STAT_RX_ASSN_RESP
, "Association response Rx's"),
3672 IPW2100_ORD(STAT_RX_REASSN
, "Reassociation Rx's"),
3673 IPW2100_ORD(STAT_RX_REASSN_RESP
,
3674 "Reassociation response Rx's"),
3675 IPW2100_ORD(STAT_RX_PROBE
, "probe Rx's"),
3676 IPW2100_ORD(STAT_RX_PROBE_RESP
, "probe response Rx's"),
3677 IPW2100_ORD(STAT_RX_BEACON
, "Rx beacon"),
3678 IPW2100_ORD(STAT_RX_ATIM
, "Rx ATIM"),
3679 IPW2100_ORD(STAT_RX_DISASSN
, "disassociation Rx"),
3680 IPW2100_ORD(STAT_RX_AUTH
, "authentication Rx"),
3681 IPW2100_ORD(STAT_RX_DEAUTH
, "deauthentication Rx"),
3682 IPW2100_ORD(STAT_RX_TOTAL_BYTES
,
3683 "Total rx data bytes received"),
3684 IPW2100_ORD(STAT_RX_ERR_CRC
, "packets with Rx CRC error"),
3685 IPW2100_ORD(STAT_RX_ERR_CRC1
, "Rx CRC errors at 1MB"),
3686 IPW2100_ORD(STAT_RX_ERR_CRC2
, "Rx CRC errors at 2MB"),
3687 IPW2100_ORD(STAT_RX_ERR_CRC5_5
, "Rx CRC errors at 5.5MB"),
3688 IPW2100_ORD(STAT_RX_ERR_CRC11
, "Rx CRC errors at 11MB"),
3689 IPW2100_ORD(STAT_RX_DUPLICATE1
,
3690 "duplicate rx packets at 1MB"),
3691 IPW2100_ORD(STAT_RX_DUPLICATE2
,
3692 "duplicate rx packets at 2MB"),
3693 IPW2100_ORD(STAT_RX_DUPLICATE5_5
,
3694 "duplicate rx packets at 5.5MB"),
3695 IPW2100_ORD(STAT_RX_DUPLICATE11
,
3696 "duplicate rx packets at 11MB"),
3697 IPW2100_ORD(STAT_RX_DUPLICATE
, "duplicate rx packets"),
3698 IPW2100_ORD(PERS_DB_LOCK
, "locking fw permanent db"),
3699 IPW2100_ORD(PERS_DB_SIZE
, "size of fw permanent db"),
3700 IPW2100_ORD(PERS_DB_ADDR
, "address of fw permanent db"),
3701 IPW2100_ORD(STAT_RX_INVALID_PROTOCOL
,
3702 "rx frames with invalid protocol"),
3703 IPW2100_ORD(SYS_BOOT_TIME
, "Boot time"),
3704 IPW2100_ORD(STAT_RX_NO_BUFFER
,
3705 "rx frames rejected due to no buffer"),
3706 IPW2100_ORD(STAT_RX_MISSING_FRAG
,
3707 "rx frames dropped due to missing fragment"),
3708 IPW2100_ORD(STAT_RX_ORPHAN_FRAG
,
3709 "rx frames dropped due to non-sequential fragment"),
3710 IPW2100_ORD(STAT_RX_ORPHAN_FRAME
,
3711 "rx frames dropped due to unmatched 1st frame"),
3712 IPW2100_ORD(STAT_RX_FRAG_AGEOUT
,
3713 "rx frames dropped due to uncompleted frame"),
3714 IPW2100_ORD(STAT_RX_ICV_ERRORS
,
3715 "ICV errors during decryption"),
3716 IPW2100_ORD(STAT_PSP_SUSPENSION
, "times adapter suspended"),
3717 IPW2100_ORD(STAT_PSP_BCN_TIMEOUT
, "beacon timeout"),
3718 IPW2100_ORD(STAT_PSP_POLL_TIMEOUT
,
3719 "poll response timeouts"),
3720 IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT
,
3721 "timeouts waiting for last {broad,multi}cast pkt"),
3722 IPW2100_ORD(STAT_PSP_RX_DTIMS
, "PSP DTIMs received"),
3723 IPW2100_ORD(STAT_PSP_RX_TIMS
, "PSP TIMs received"),
3724 IPW2100_ORD(STAT_PSP_STATION_ID
, "PSP Station ID"),
3725 IPW2100_ORD(LAST_ASSN_TIME
, "RTC time of last association"),
3726 IPW2100_ORD(STAT_PERCENT_MISSED_BCNS
,
3727 "current calculation of % missed beacons"),
3728 IPW2100_ORD(STAT_PERCENT_RETRIES
,
3729 "current calculation of % missed tx retries"),
3730 IPW2100_ORD(ASSOCIATED_AP_PTR
,
3731 "0 if not associated, else pointer to AP table entry"),
3732 IPW2100_ORD(AVAILABLE_AP_CNT
,
3733 "AP's decsribed in the AP table"),
3734 IPW2100_ORD(AP_LIST_PTR
, "Ptr to list of available APs"),
3735 IPW2100_ORD(STAT_AP_ASSNS
, "associations"),
3736 IPW2100_ORD(STAT_ASSN_FAIL
, "association failures"),
3737 IPW2100_ORD(STAT_ASSN_RESP_FAIL
,
3738 "failures due to response fail"),
3739 IPW2100_ORD(STAT_FULL_SCANS
, "full scans"),
3740 IPW2100_ORD(CARD_DISABLED
, "Card Disabled"),
3741 IPW2100_ORD(STAT_ROAM_INHIBIT
,
3742 "times roaming was inhibited due to activity"),
3743 IPW2100_ORD(RSSI_AT_ASSN
,
3744 "RSSI of associated AP at time of association"),
3745 IPW2100_ORD(STAT_ASSN_CAUSE1
,
3746 "reassociation: no probe response or TX on hop"),
3747 IPW2100_ORD(STAT_ASSN_CAUSE2
,
3748 "reassociation: poor tx/rx quality"),
3749 IPW2100_ORD(STAT_ASSN_CAUSE3
,
3750 "reassociation: tx/rx quality (excessive AP load"),
3751 IPW2100_ORD(STAT_ASSN_CAUSE4
,
3752 "reassociation: AP RSSI level"),
3753 IPW2100_ORD(STAT_ASSN_CAUSE5
,
3754 "reassociations due to load leveling"),
3755 IPW2100_ORD(STAT_AUTH_FAIL
, "times authentication failed"),
3756 IPW2100_ORD(STAT_AUTH_RESP_FAIL
,
3757 "times authentication response failed"),
3758 IPW2100_ORD(STATION_TABLE_CNT
,
3759 "entries in association table"),
3760 IPW2100_ORD(RSSI_AVG_CURR
, "Current avg RSSI"),
3761 IPW2100_ORD(POWER_MGMT_MODE
, "Power mode - 0=CAM, 1=PSP"),
3762 IPW2100_ORD(COUNTRY_CODE
,
3763 "IEEE country code as recv'd from beacon"),
3764 IPW2100_ORD(COUNTRY_CHANNELS
,
3765 "channels supported by country"),
3766 IPW2100_ORD(RESET_CNT
, "adapter resets (warm)"),
3767 IPW2100_ORD(BEACON_INTERVAL
, "Beacon interval"),
3768 IPW2100_ORD(ANTENNA_DIVERSITY
,
3769 "TRUE if antenna diversity is disabled"),
3770 IPW2100_ORD(DTIM_PERIOD
, "beacon intervals between DTIMs"),
3771 IPW2100_ORD(OUR_FREQ
,
3772 "current radio freq lower digits - channel ID"),
3773 IPW2100_ORD(RTC_TIME
, "current RTC time"),
3774 IPW2100_ORD(PORT_TYPE
, "operating mode"),
3775 IPW2100_ORD(CURRENT_TX_RATE
, "current tx rate"),
3776 IPW2100_ORD(SUPPORTED_RATES
, "supported tx rates"),
3777 IPW2100_ORD(ATIM_WINDOW
, "current ATIM Window"),
3778 IPW2100_ORD(BASIC_RATES
, "basic tx rates"),
3779 IPW2100_ORD(NIC_HIGHEST_RATE
, "NIC highest tx rate"),
3780 IPW2100_ORD(AP_HIGHEST_RATE
, "AP highest tx rate"),
3781 IPW2100_ORD(CAPABILITIES
,
3782 "Management frame capability field"),
3783 IPW2100_ORD(AUTH_TYPE
, "Type of authentication"),
3784 IPW2100_ORD(RADIO_TYPE
, "Adapter card platform type"),
3785 IPW2100_ORD(RTS_THRESHOLD
,
3786 "Min packet length for RTS handshaking"),
3787 IPW2100_ORD(INT_MODE
, "International mode"),
3788 IPW2100_ORD(FRAGMENTATION_THRESHOLD
,
3789 "protocol frag threshold"),
3790 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS
,
3791 "EEPROM offset in SRAM"),
3792 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE
,
3793 "EEPROM size in SRAM"),
3794 IPW2100_ORD(EEPROM_SKU_CAPABILITY
, "EEPROM SKU Capability"),
3795 IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS
,
3796 "EEPROM IBSS 11b channel set"),
3797 IPW2100_ORD(MAC_VERSION
, "MAC Version"),
3798 IPW2100_ORD(MAC_REVISION
, "MAC Revision"),
3799 IPW2100_ORD(RADIO_VERSION
, "Radio Version"),
3800 IPW2100_ORD(NIC_MANF_DATE_TIME
, "MANF Date/Time STAMP"),
3801 IPW2100_ORD(UCODE_VERSION
, "Ucode Version"),};
3803 static ssize_t
show_registers(struct device
*d
, struct device_attribute
*attr
,
3807 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3808 struct net_device
*dev
= priv
->net_dev
;
3812 out
+= sprintf(out
, "%30s [Address ] : Hex\n", "Register");
3814 for (i
= 0; i
< ARRAY_SIZE(hw_data
); i
++) {
3815 read_register(dev
, hw_data
[i
].addr
, &val
);
3816 out
+= sprintf(out
, "%30s [%08X] : %08X\n",
3817 hw_data
[i
].name
, hw_data
[i
].addr
, val
);
3823 static DEVICE_ATTR(registers
, S_IRUGO
, show_registers
, NULL
);
3825 static ssize_t
show_hardware(struct device
*d
, struct device_attribute
*attr
,
3828 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3829 struct net_device
*dev
= priv
->net_dev
;
3833 out
+= sprintf(out
, "%30s [Address ] : Hex\n", "NIC entry");
3835 for (i
= 0; i
< ARRAY_SIZE(nic_data
); i
++) {
3840 switch (nic_data
[i
].size
) {
3842 read_nic_byte(dev
, nic_data
[i
].addr
, &tmp8
);
3843 out
+= sprintf(out
, "%30s [%08X] : %02X\n",
3844 nic_data
[i
].name
, nic_data
[i
].addr
,
3848 read_nic_word(dev
, nic_data
[i
].addr
, &tmp16
);
3849 out
+= sprintf(out
, "%30s [%08X] : %04X\n",
3850 nic_data
[i
].name
, nic_data
[i
].addr
,
3854 read_nic_dword(dev
, nic_data
[i
].addr
, &tmp32
);
3855 out
+= sprintf(out
, "%30s [%08X] : %08X\n",
3856 nic_data
[i
].name
, nic_data
[i
].addr
,
3864 static DEVICE_ATTR(hardware
, S_IRUGO
, show_hardware
, NULL
);
3866 static ssize_t
show_memory(struct device
*d
, struct device_attribute
*attr
,
3869 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3870 struct net_device
*dev
= priv
->net_dev
;
3871 static unsigned long loop
= 0;
3877 if (loop
>= 0x30000)
3880 /* sysfs provides us PAGE_SIZE buffer */
3881 while (len
< PAGE_SIZE
- 128 && loop
< 0x30000) {
3883 if (priv
->snapshot
[0])
3884 for (i
= 0; i
< 4; i
++)
3886 *(u32
*) SNAPSHOT_ADDR(loop
+ i
* 4);
3888 for (i
= 0; i
< 4; i
++)
3889 read_nic_dword(dev
, loop
+ i
* 4, &buffer
[i
]);
3892 len
+= sprintf(buf
+ len
,
3897 ((u8
*) buffer
)[0x0],
3898 ((u8
*) buffer
)[0x1],
3899 ((u8
*) buffer
)[0x2],
3900 ((u8
*) buffer
)[0x3],
3901 ((u8
*) buffer
)[0x4],
3902 ((u8
*) buffer
)[0x5],
3903 ((u8
*) buffer
)[0x6],
3904 ((u8
*) buffer
)[0x7],
3905 ((u8
*) buffer
)[0x8],
3906 ((u8
*) buffer
)[0x9],
3907 ((u8
*) buffer
)[0xa],
3908 ((u8
*) buffer
)[0xb],
3909 ((u8
*) buffer
)[0xc],
3910 ((u8
*) buffer
)[0xd],
3911 ((u8
*) buffer
)[0xe],
3912 ((u8
*) buffer
)[0xf]);
3914 len
+= sprintf(buf
+ len
, "%s\n",
3915 snprint_line(line
, sizeof(line
),
3916 (u8
*) buffer
, 16, loop
));
3923 static ssize_t
store_memory(struct device
*d
, struct device_attribute
*attr
,
3924 const char *buf
, size_t count
)
3926 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3927 struct net_device
*dev
= priv
->net_dev
;
3928 const char *p
= buf
;
3930 (void)dev
; /* kill unused-var warning for debug-only code */
3936 (count
>= 2 && tolower(p
[0]) == 'o' && tolower(p
[1]) == 'n')) {
3937 IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
3941 } else if (p
[0] == '0' || (count
>= 2 && tolower(p
[0]) == 'o' &&
3942 tolower(p
[1]) == 'f')) {
3943 IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
3947 } else if (tolower(p
[0]) == 'r') {
3948 IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", dev
->name
);
3949 ipw2100_snapshot_free(priv
);
3952 IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
3953 "reset = clear memory snapshot\n", dev
->name
);
3958 static DEVICE_ATTR(memory
, S_IWUSR
| S_IRUGO
, show_memory
, store_memory
);
3960 static ssize_t
show_ordinals(struct device
*d
, struct device_attribute
*attr
,
3963 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3967 static int loop
= 0;
3969 if (priv
->status
& STATUS_RF_KILL_MASK
)
3972 if (loop
>= ARRAY_SIZE(ord_data
))
3975 /* sysfs provides us PAGE_SIZE buffer */
3976 while (len
< PAGE_SIZE
- 128 && loop
< ARRAY_SIZE(ord_data
)) {
3977 val_len
= sizeof(u32
);
3979 if (ipw2100_get_ordinal(priv
, ord_data
[loop
].index
, &val
,
3981 len
+= sprintf(buf
+ len
, "[0x%02X] = ERROR %s\n",
3982 ord_data
[loop
].index
,
3983 ord_data
[loop
].desc
);
3985 len
+= sprintf(buf
+ len
, "[0x%02X] = 0x%08X %s\n",
3986 ord_data
[loop
].index
, val
,
3987 ord_data
[loop
].desc
);
3994 static DEVICE_ATTR(ordinals
, S_IRUGO
, show_ordinals
, NULL
);
3996 static ssize_t
show_stats(struct device
*d
, struct device_attribute
*attr
,
3999 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4002 out
+= sprintf(out
, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
4003 priv
->interrupts
, priv
->tx_interrupts
,
4004 priv
->rx_interrupts
, priv
->inta_other
);
4005 out
+= sprintf(out
, "firmware resets: %d\n", priv
->resets
);
4006 out
+= sprintf(out
, "firmware hangs: %d\n", priv
->hangs
);
4007 #ifdef CONFIG_IPW2100_DEBUG
4008 out
+= sprintf(out
, "packet mismatch image: %s\n",
4009 priv
->snapshot
[0] ? "YES" : "NO");
4015 static DEVICE_ATTR(stats
, S_IRUGO
, show_stats
, NULL
);
4017 static int ipw2100_switch_mode(struct ipw2100_priv
*priv
, u32 mode
)
4021 if (mode
== priv
->ieee
->iw_mode
)
4024 err
= ipw2100_disable_adapter(priv
);
4026 printk(KERN_ERR DRV_NAME
": %s: Could not disable adapter %d\n",
4027 priv
->net_dev
->name
, err
);
4033 priv
->net_dev
->type
= ARPHRD_ETHER
;
4036 priv
->net_dev
->type
= ARPHRD_ETHER
;
4038 #ifdef CONFIG_IPW2100_MONITOR
4039 case IW_MODE_MONITOR
:
4040 priv
->last_mode
= priv
->ieee
->iw_mode
;
4041 priv
->net_dev
->type
= ARPHRD_IEEE80211_RADIOTAP
;
4043 #endif /* CONFIG_IPW2100_MONITOR */
4046 priv
->ieee
->iw_mode
= mode
;
4049 /* Indicate ipw2100_download_firmware download firmware
4050 * from disk instead of memory. */
4051 ipw2100_firmware
.version
= 0;
4054 printk(KERN_INFO
"%s: Resetting on mode change.\n", priv
->net_dev
->name
);
4055 priv
->reset_backoff
= 0;
4056 schedule_reset(priv
);
4061 static ssize_t
show_internals(struct device
*d
, struct device_attribute
*attr
,
4064 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4067 #define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" y "\n", priv-> x)
4069 if (priv
->status
& STATUS_ASSOCIATED
)
4070 len
+= sprintf(buf
+ len
, "connected: %lu\n",
4071 get_seconds() - priv
->connect_start
);
4073 len
+= sprintf(buf
+ len
, "not connected\n");
4075 DUMP_VAR(ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
], "p");
4076 DUMP_VAR(status
, "08lx");
4077 DUMP_VAR(config
, "08lx");
4078 DUMP_VAR(capability
, "08lx");
4081 sprintf(buf
+ len
, "last_rtc: %lu\n",
4082 (unsigned long)priv
->last_rtc
);
4084 DUMP_VAR(fatal_error
, "d");
4085 DUMP_VAR(stop_hang_check
, "d");
4086 DUMP_VAR(stop_rf_kill
, "d");
4087 DUMP_VAR(messages_sent
, "d");
4089 DUMP_VAR(tx_pend_stat
.value
, "d");
4090 DUMP_VAR(tx_pend_stat
.hi
, "d");
4092 DUMP_VAR(tx_free_stat
.value
, "d");
4093 DUMP_VAR(tx_free_stat
.lo
, "d");
4095 DUMP_VAR(msg_free_stat
.value
, "d");
4096 DUMP_VAR(msg_free_stat
.lo
, "d");
4098 DUMP_VAR(msg_pend_stat
.value
, "d");
4099 DUMP_VAR(msg_pend_stat
.hi
, "d");
4101 DUMP_VAR(fw_pend_stat
.value
, "d");
4102 DUMP_VAR(fw_pend_stat
.hi
, "d");
4104 DUMP_VAR(txq_stat
.value
, "d");
4105 DUMP_VAR(txq_stat
.lo
, "d");
4107 DUMP_VAR(ieee
->scans
, "d");
4108 DUMP_VAR(reset_backoff
, "d");
4113 static DEVICE_ATTR(internals
, S_IRUGO
, show_internals
, NULL
);
4115 static ssize_t
show_bssinfo(struct device
*d
, struct device_attribute
*attr
,
4118 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4119 char essid
[IW_ESSID_MAX_SIZE
+ 1];
4123 unsigned int length
;
4126 if (priv
->status
& STATUS_RF_KILL_MASK
)
4129 memset(essid
, 0, sizeof(essid
));
4130 memset(bssid
, 0, sizeof(bssid
));
4132 length
= IW_ESSID_MAX_SIZE
;
4133 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_SSID
, essid
, &length
);
4135 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4138 length
= sizeof(bssid
);
4139 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
,
4142 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4145 length
= sizeof(u32
);
4146 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_OUR_FREQ
, &chan
, &length
);
4148 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4151 out
+= sprintf(out
, "ESSID: %s\n", essid
);
4152 out
+= sprintf(out
, "BSSID: %pM\n", bssid
);
4153 out
+= sprintf(out
, "Channel: %d\n", chan
);
4158 static DEVICE_ATTR(bssinfo
, S_IRUGO
, show_bssinfo
, NULL
);
4160 #ifdef CONFIG_IPW2100_DEBUG
4161 static ssize_t
show_debug_level(struct device_driver
*d
, char *buf
)
4163 return sprintf(buf
, "0x%08X\n", ipw2100_debug_level
);
4166 static ssize_t
store_debug_level(struct device_driver
*d
,
4167 const char *buf
, size_t count
)
4172 ret
= kstrtou32(buf
, 0, &val
);
4174 IPW_DEBUG_INFO(": %s is not in hex or decimal form.\n", buf
);
4176 ipw2100_debug_level
= val
;
4178 return strnlen(buf
, count
);
4181 static DRIVER_ATTR(debug_level
, S_IWUSR
| S_IRUGO
, show_debug_level
,
4183 #endif /* CONFIG_IPW2100_DEBUG */
4185 static ssize_t
show_fatal_error(struct device
*d
,
4186 struct device_attribute
*attr
, char *buf
)
4188 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4192 if (priv
->fatal_error
)
4193 out
+= sprintf(out
, "0x%08X\n", priv
->fatal_error
);
4195 out
+= sprintf(out
, "0\n");
4197 for (i
= 1; i
<= IPW2100_ERROR_QUEUE
; i
++) {
4198 if (!priv
->fatal_errors
[(priv
->fatal_index
- i
) %
4199 IPW2100_ERROR_QUEUE
])
4202 out
+= sprintf(out
, "%d. 0x%08X\n", i
,
4203 priv
->fatal_errors
[(priv
->fatal_index
- i
) %
4204 IPW2100_ERROR_QUEUE
]);
4210 static ssize_t
store_fatal_error(struct device
*d
,
4211 struct device_attribute
*attr
, const char *buf
,
4214 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4215 schedule_reset(priv
);
4219 static DEVICE_ATTR(fatal_error
, S_IWUSR
| S_IRUGO
, show_fatal_error
,
4222 static ssize_t
show_scan_age(struct device
*d
, struct device_attribute
*attr
,
4225 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4226 return sprintf(buf
, "%d\n", priv
->ieee
->scan_age
);
4229 static ssize_t
store_scan_age(struct device
*d
, struct device_attribute
*attr
,
4230 const char *buf
, size_t count
)
4232 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4233 struct net_device
*dev
= priv
->net_dev
;
4237 (void)dev
; /* kill unused-var warning for debug-only code */
4239 IPW_DEBUG_INFO("enter\n");
4241 ret
= kstrtoul(buf
, 0, &val
);
4243 IPW_DEBUG_INFO("%s: user supplied invalid value.\n", dev
->name
);
4245 priv
->ieee
->scan_age
= val
;
4246 IPW_DEBUG_INFO("set scan_age = %u\n", priv
->ieee
->scan_age
);
4249 IPW_DEBUG_INFO("exit\n");
4250 return strnlen(buf
, count
);
4253 static DEVICE_ATTR(scan_age
, S_IWUSR
| S_IRUGO
, show_scan_age
, store_scan_age
);
4255 static ssize_t
show_rf_kill(struct device
*d
, struct device_attribute
*attr
,
4258 /* 0 - RF kill not enabled
4259 1 - SW based RF kill active (sysfs)
4260 2 - HW based RF kill active
4261 3 - Both HW and SW baed RF kill active */
4262 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4263 int val
= ((priv
->status
& STATUS_RF_KILL_SW
) ? 0x1 : 0x0) |
4264 (rf_kill_active(priv
) ? 0x2 : 0x0);
4265 return sprintf(buf
, "%i\n", val
);
4268 static int ipw_radio_kill_sw(struct ipw2100_priv
*priv
, int disable_radio
)
4270 if ((disable_radio
? 1 : 0) ==
4271 (priv
->status
& STATUS_RF_KILL_SW
? 1 : 0))
4274 IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
4275 disable_radio
? "OFF" : "ON");
4277 mutex_lock(&priv
->action_mutex
);
4279 if (disable_radio
) {
4280 priv
->status
|= STATUS_RF_KILL_SW
;
4283 priv
->status
&= ~STATUS_RF_KILL_SW
;
4284 if (rf_kill_active(priv
)) {
4285 IPW_DEBUG_RF_KILL("Can not turn radio back on - "
4286 "disabled by HW switch\n");
4287 /* Make sure the RF_KILL check timer is running */
4288 priv
->stop_rf_kill
= 0;
4289 mod_delayed_work(system_wq
, &priv
->rf_kill
,
4290 round_jiffies_relative(HZ
));
4292 schedule_reset(priv
);
4295 mutex_unlock(&priv
->action_mutex
);
4299 static ssize_t
store_rf_kill(struct device
*d
, struct device_attribute
*attr
,
4300 const char *buf
, size_t count
)
4302 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4303 ipw_radio_kill_sw(priv
, buf
[0] == '1');
4307 static DEVICE_ATTR(rf_kill
, S_IWUSR
| S_IRUGO
, show_rf_kill
, store_rf_kill
);
4309 static struct attribute
*ipw2100_sysfs_entries
[] = {
4310 &dev_attr_hardware
.attr
,
4311 &dev_attr_registers
.attr
,
4312 &dev_attr_ordinals
.attr
,
4314 &dev_attr_stats
.attr
,
4315 &dev_attr_internals
.attr
,
4316 &dev_attr_bssinfo
.attr
,
4317 &dev_attr_memory
.attr
,
4318 &dev_attr_scan_age
.attr
,
4319 &dev_attr_fatal_error
.attr
,
4320 &dev_attr_rf_kill
.attr
,
4322 &dev_attr_status
.attr
,
4323 &dev_attr_capability
.attr
,
4327 static struct attribute_group ipw2100_attribute_group
= {
4328 .attrs
= ipw2100_sysfs_entries
,
4331 static int status_queue_allocate(struct ipw2100_priv
*priv
, int entries
)
4333 struct ipw2100_status_queue
*q
= &priv
->status_queue
;
4335 IPW_DEBUG_INFO("enter\n");
4337 q
->size
= entries
* sizeof(struct ipw2100_status
);
4338 q
->drv
= pci_zalloc_consistent(priv
->pci_dev
, q
->size
, &q
->nic
);
4340 IPW_DEBUG_WARNING("Can not allocate status queue.\n");
4344 IPW_DEBUG_INFO("exit\n");
4349 static void status_queue_free(struct ipw2100_priv
*priv
)
4351 IPW_DEBUG_INFO("enter\n");
4353 if (priv
->status_queue
.drv
) {
4354 pci_free_consistent(priv
->pci_dev
, priv
->status_queue
.size
,
4355 priv
->status_queue
.drv
,
4356 priv
->status_queue
.nic
);
4357 priv
->status_queue
.drv
= NULL
;
4360 IPW_DEBUG_INFO("exit\n");
4363 static int bd_queue_allocate(struct ipw2100_priv
*priv
,
4364 struct ipw2100_bd_queue
*q
, int entries
)
4366 IPW_DEBUG_INFO("enter\n");
4368 memset(q
, 0, sizeof(struct ipw2100_bd_queue
));
4370 q
->entries
= entries
;
4371 q
->size
= entries
* sizeof(struct ipw2100_bd
);
4372 q
->drv
= pci_zalloc_consistent(priv
->pci_dev
, q
->size
, &q
->nic
);
4375 ("can't allocate shared memory for buffer descriptors\n");
4379 IPW_DEBUG_INFO("exit\n");
4384 static void bd_queue_free(struct ipw2100_priv
*priv
, struct ipw2100_bd_queue
*q
)
4386 IPW_DEBUG_INFO("enter\n");
4392 pci_free_consistent(priv
->pci_dev
, q
->size
, q
->drv
, q
->nic
);
4396 IPW_DEBUG_INFO("exit\n");
4399 static void bd_queue_initialize(struct ipw2100_priv
*priv
,
4400 struct ipw2100_bd_queue
*q
, u32 base
, u32 size
,
4403 IPW_DEBUG_INFO("enter\n");
4405 IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q
->drv
,
4408 write_register(priv
->net_dev
, base
, q
->nic
);
4409 write_register(priv
->net_dev
, size
, q
->entries
);
4410 write_register(priv
->net_dev
, r
, q
->oldest
);
4411 write_register(priv
->net_dev
, w
, q
->next
);
4413 IPW_DEBUG_INFO("exit\n");
4416 static void ipw2100_kill_works(struct ipw2100_priv
*priv
)
4418 priv
->stop_rf_kill
= 1;
4419 priv
->stop_hang_check
= 1;
4420 cancel_delayed_work_sync(&priv
->reset_work
);
4421 cancel_delayed_work_sync(&priv
->security_work
);
4422 cancel_delayed_work_sync(&priv
->wx_event_work
);
4423 cancel_delayed_work_sync(&priv
->hang_check
);
4424 cancel_delayed_work_sync(&priv
->rf_kill
);
4425 cancel_delayed_work_sync(&priv
->scan_event
);
4428 static int ipw2100_tx_allocate(struct ipw2100_priv
*priv
)
4430 int i
, j
, err
= -EINVAL
;
4434 IPW_DEBUG_INFO("enter\n");
4436 err
= bd_queue_allocate(priv
, &priv
->tx_queue
, TX_QUEUE_LENGTH
);
4438 IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
4439 priv
->net_dev
->name
);
4443 priv
->tx_buffers
= kmalloc_array(TX_PENDED_QUEUE_LENGTH
,
4444 sizeof(struct ipw2100_tx_packet
),
4446 if (!priv
->tx_buffers
) {
4447 bd_queue_free(priv
, &priv
->tx_queue
);
4451 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4452 v
= pci_alloc_consistent(priv
->pci_dev
,
4453 sizeof(struct ipw2100_data_header
),
4456 printk(KERN_ERR DRV_NAME
4457 ": %s: PCI alloc failed for tx " "buffers.\n",
4458 priv
->net_dev
->name
);
4463 priv
->tx_buffers
[i
].type
= DATA
;
4464 priv
->tx_buffers
[i
].info
.d_struct
.data
=
4465 (struct ipw2100_data_header
*)v
;
4466 priv
->tx_buffers
[i
].info
.d_struct
.data_phys
= p
;
4467 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4470 if (i
== TX_PENDED_QUEUE_LENGTH
)
4473 for (j
= 0; j
< i
; j
++) {
4474 pci_free_consistent(priv
->pci_dev
,
4475 sizeof(struct ipw2100_data_header
),
4476 priv
->tx_buffers
[j
].info
.d_struct
.data
,
4477 priv
->tx_buffers
[j
].info
.d_struct
.
4481 kfree(priv
->tx_buffers
);
4482 priv
->tx_buffers
= NULL
;
4487 static void ipw2100_tx_initialize(struct ipw2100_priv
*priv
)
4491 IPW_DEBUG_INFO("enter\n");
4494 * reinitialize packet info lists
4496 INIT_LIST_HEAD(&priv
->fw_pend_list
);
4497 INIT_STAT(&priv
->fw_pend_stat
);
4500 * reinitialize lists
4502 INIT_LIST_HEAD(&priv
->tx_pend_list
);
4503 INIT_LIST_HEAD(&priv
->tx_free_list
);
4504 INIT_STAT(&priv
->tx_pend_stat
);
4505 INIT_STAT(&priv
->tx_free_stat
);
4507 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4508 /* We simply drop any SKBs that have been queued for
4510 if (priv
->tx_buffers
[i
].info
.d_struct
.txb
) {
4511 libipw_txb_free(priv
->tx_buffers
[i
].info
.d_struct
.
4513 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4516 list_add_tail(&priv
->tx_buffers
[i
].list
, &priv
->tx_free_list
);
4519 SET_STAT(&priv
->tx_free_stat
, i
);
4521 priv
->tx_queue
.oldest
= 0;
4522 priv
->tx_queue
.available
= priv
->tx_queue
.entries
;
4523 priv
->tx_queue
.next
= 0;
4524 INIT_STAT(&priv
->txq_stat
);
4525 SET_STAT(&priv
->txq_stat
, priv
->tx_queue
.available
);
4527 bd_queue_initialize(priv
, &priv
->tx_queue
,
4528 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE
,
4529 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE
,
4530 IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX
,
4531 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
);
4533 IPW_DEBUG_INFO("exit\n");
4537 static void ipw2100_tx_free(struct ipw2100_priv
*priv
)
4541 IPW_DEBUG_INFO("enter\n");
4543 bd_queue_free(priv
, &priv
->tx_queue
);
4545 if (!priv
->tx_buffers
)
4548 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4549 if (priv
->tx_buffers
[i
].info
.d_struct
.txb
) {
4550 libipw_txb_free(priv
->tx_buffers
[i
].info
.d_struct
.
4552 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4554 if (priv
->tx_buffers
[i
].info
.d_struct
.data
)
4555 pci_free_consistent(priv
->pci_dev
,
4556 sizeof(struct ipw2100_data_header
),
4557 priv
->tx_buffers
[i
].info
.d_struct
.
4559 priv
->tx_buffers
[i
].info
.d_struct
.
4563 kfree(priv
->tx_buffers
);
4564 priv
->tx_buffers
= NULL
;
4566 IPW_DEBUG_INFO("exit\n");
4569 static int ipw2100_rx_allocate(struct ipw2100_priv
*priv
)
4571 int i
, j
, err
= -EINVAL
;
4573 IPW_DEBUG_INFO("enter\n");
4575 err
= bd_queue_allocate(priv
, &priv
->rx_queue
, RX_QUEUE_LENGTH
);
4577 IPW_DEBUG_INFO("failed bd_queue_allocate\n");
4581 err
= status_queue_allocate(priv
, RX_QUEUE_LENGTH
);
4583 IPW_DEBUG_INFO("failed status_queue_allocate\n");
4584 bd_queue_free(priv
, &priv
->rx_queue
);
4591 priv
->rx_buffers
= kmalloc(RX_QUEUE_LENGTH
*
4592 sizeof(struct ipw2100_rx_packet
),
4594 if (!priv
->rx_buffers
) {
4595 IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
4597 bd_queue_free(priv
, &priv
->rx_queue
);
4599 status_queue_free(priv
);
4604 for (i
= 0; i
< RX_QUEUE_LENGTH
; i
++) {
4605 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
4607 err
= ipw2100_alloc_skb(priv
, packet
);
4608 if (unlikely(err
)) {
4613 /* The BD holds the cache aligned address */
4614 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
4615 priv
->rx_queue
.drv
[i
].buf_length
= IPW_RX_NIC_BUFFER_LENGTH
;
4616 priv
->status_queue
.drv
[i
].status_fields
= 0;
4619 if (i
== RX_QUEUE_LENGTH
)
4622 for (j
= 0; j
< i
; j
++) {
4623 pci_unmap_single(priv
->pci_dev
, priv
->rx_buffers
[j
].dma_addr
,
4624 sizeof(struct ipw2100_rx_packet
),
4625 PCI_DMA_FROMDEVICE
);
4626 dev_kfree_skb(priv
->rx_buffers
[j
].skb
);
4629 kfree(priv
->rx_buffers
);
4630 priv
->rx_buffers
= NULL
;
4632 bd_queue_free(priv
, &priv
->rx_queue
);
4634 status_queue_free(priv
);
4639 static void ipw2100_rx_initialize(struct ipw2100_priv
*priv
)
4641 IPW_DEBUG_INFO("enter\n");
4643 priv
->rx_queue
.oldest
= 0;
4644 priv
->rx_queue
.available
= priv
->rx_queue
.entries
- 1;
4645 priv
->rx_queue
.next
= priv
->rx_queue
.entries
- 1;
4647 INIT_STAT(&priv
->rxq_stat
);
4648 SET_STAT(&priv
->rxq_stat
, priv
->rx_queue
.available
);
4650 bd_queue_initialize(priv
, &priv
->rx_queue
,
4651 IPW_MEM_HOST_SHARED_RX_BD_BASE
,
4652 IPW_MEM_HOST_SHARED_RX_BD_SIZE
,
4653 IPW_MEM_HOST_SHARED_RX_READ_INDEX
,
4654 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
);
4656 /* set up the status queue */
4657 write_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_STATUS_BASE
,
4658 priv
->status_queue
.nic
);
4660 IPW_DEBUG_INFO("exit\n");
4663 static void ipw2100_rx_free(struct ipw2100_priv
*priv
)
4667 IPW_DEBUG_INFO("enter\n");
4669 bd_queue_free(priv
, &priv
->rx_queue
);
4670 status_queue_free(priv
);
4672 if (!priv
->rx_buffers
)
4675 for (i
= 0; i
< RX_QUEUE_LENGTH
; i
++) {
4676 if (priv
->rx_buffers
[i
].rxp
) {
4677 pci_unmap_single(priv
->pci_dev
,
4678 priv
->rx_buffers
[i
].dma_addr
,
4679 sizeof(struct ipw2100_rx
),
4680 PCI_DMA_FROMDEVICE
);
4681 dev_kfree_skb(priv
->rx_buffers
[i
].skb
);
4685 kfree(priv
->rx_buffers
);
4686 priv
->rx_buffers
= NULL
;
4688 IPW_DEBUG_INFO("exit\n");
4691 static int ipw2100_read_mac_address(struct ipw2100_priv
*priv
)
4693 u32 length
= ETH_ALEN
;
4698 err
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ADAPTER_MAC
, addr
, &length
);
4700 IPW_DEBUG_INFO("MAC address read failed\n");
4704 memcpy(priv
->net_dev
->dev_addr
, addr
, ETH_ALEN
);
4705 IPW_DEBUG_INFO("card MAC is %pM\n", priv
->net_dev
->dev_addr
);
4710 /********************************************************************
4714 ********************************************************************/
4716 static int ipw2100_set_mac_address(struct ipw2100_priv
*priv
, int batch_mode
)
4718 struct host_command cmd
= {
4719 .host_command
= ADAPTER_ADDRESS
,
4720 .host_command_sequence
= 0,
4721 .host_command_length
= ETH_ALEN
4725 IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
4727 IPW_DEBUG_INFO("enter\n");
4729 if (priv
->config
& CFG_CUSTOM_MAC
) {
4730 memcpy(cmd
.host_command_parameters
, priv
->mac_addr
, ETH_ALEN
);
4731 memcpy(priv
->net_dev
->dev_addr
, priv
->mac_addr
, ETH_ALEN
);
4733 memcpy(cmd
.host_command_parameters
, priv
->net_dev
->dev_addr
,
4736 err
= ipw2100_hw_send_command(priv
, &cmd
);
4738 IPW_DEBUG_INFO("exit\n");
4742 static int ipw2100_set_port_type(struct ipw2100_priv
*priv
, u32 port_type
,
4745 struct host_command cmd
= {
4746 .host_command
= PORT_TYPE
,
4747 .host_command_sequence
= 0,
4748 .host_command_length
= sizeof(u32
)
4752 switch (port_type
) {
4754 cmd
.host_command_parameters
[0] = IPW_BSS
;
4757 cmd
.host_command_parameters
[0] = IPW_IBSS
;
4761 IPW_DEBUG_HC("PORT_TYPE: %s\n",
4762 port_type
== IPW_IBSS
? "Ad-Hoc" : "Managed");
4765 err
= ipw2100_disable_adapter(priv
);
4767 printk(KERN_ERR DRV_NAME
4768 ": %s: Could not disable adapter %d\n",
4769 priv
->net_dev
->name
, err
);
4774 /* send cmd to firmware */
4775 err
= ipw2100_hw_send_command(priv
, &cmd
);
4778 ipw2100_enable_adapter(priv
);
4783 static int ipw2100_set_channel(struct ipw2100_priv
*priv
, u32 channel
,
4786 struct host_command cmd
= {
4787 .host_command
= CHANNEL
,
4788 .host_command_sequence
= 0,
4789 .host_command_length
= sizeof(u32
)
4793 cmd
.host_command_parameters
[0] = channel
;
4795 IPW_DEBUG_HC("CHANNEL: %d\n", channel
);
4797 /* If BSS then we don't support channel selection */
4798 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
)
4801 if ((channel
!= 0) &&
4802 ((channel
< REG_MIN_CHANNEL
) || (channel
> REG_MAX_CHANNEL
)))
4806 err
= ipw2100_disable_adapter(priv
);
4811 err
= ipw2100_hw_send_command(priv
, &cmd
);
4813 IPW_DEBUG_INFO("Failed to set channel to %d", channel
);
4818 priv
->config
|= CFG_STATIC_CHANNEL
;
4820 priv
->config
&= ~CFG_STATIC_CHANNEL
;
4822 priv
->channel
= channel
;
4825 err
= ipw2100_enable_adapter(priv
);
4833 static int ipw2100_system_config(struct ipw2100_priv
*priv
, int batch_mode
)
4835 struct host_command cmd
= {
4836 .host_command
= SYSTEM_CONFIG
,
4837 .host_command_sequence
= 0,
4838 .host_command_length
= 12,
4840 u32 ibss_mask
, len
= sizeof(u32
);
4843 /* Set system configuration */
4846 err
= ipw2100_disable_adapter(priv
);
4851 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
)
4852 cmd
.host_command_parameters
[0] |= IPW_CFG_IBSS_AUTO_START
;
4854 cmd
.host_command_parameters
[0] |= IPW_CFG_IBSS_MASK
|
4855 IPW_CFG_BSS_MASK
| IPW_CFG_802_1x_ENABLE
;
4857 if (!(priv
->config
& CFG_LONG_PREAMBLE
))
4858 cmd
.host_command_parameters
[0] |= IPW_CFG_PREAMBLE_AUTO
;
4860 err
= ipw2100_get_ordinal(priv
,
4861 IPW_ORD_EEPROM_IBSS_11B_CHANNELS
,
4864 ibss_mask
= IPW_IBSS_11B_DEFAULT_MASK
;
4866 cmd
.host_command_parameters
[1] = REG_CHANNEL_MASK
;
4867 cmd
.host_command_parameters
[2] = REG_CHANNEL_MASK
& ibss_mask
;
4870 /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A; */
4872 err
= ipw2100_hw_send_command(priv
, &cmd
);
4876 /* If IPv6 is configured in the kernel then we don't want to filter out all
4877 * of the multicast packets as IPv6 needs some. */
4878 #if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
4879 cmd
.host_command
= ADD_MULTICAST
;
4880 cmd
.host_command_sequence
= 0;
4881 cmd
.host_command_length
= 0;
4883 ipw2100_hw_send_command(priv
, &cmd
);
4886 err
= ipw2100_enable_adapter(priv
);
4894 static int ipw2100_set_tx_rates(struct ipw2100_priv
*priv
, u32 rate
,
4897 struct host_command cmd
= {
4898 .host_command
= BASIC_TX_RATES
,
4899 .host_command_sequence
= 0,
4900 .host_command_length
= 4
4904 cmd
.host_command_parameters
[0] = rate
& TX_RATE_MASK
;
4907 err
= ipw2100_disable_adapter(priv
);
4912 /* Set BASIC TX Rate first */
4913 ipw2100_hw_send_command(priv
, &cmd
);
4916 cmd
.host_command
= TX_RATES
;
4917 ipw2100_hw_send_command(priv
, &cmd
);
4919 /* Set MSDU TX Rate */
4920 cmd
.host_command
= MSDU_TX_RATES
;
4921 ipw2100_hw_send_command(priv
, &cmd
);
4924 err
= ipw2100_enable_adapter(priv
);
4929 priv
->tx_rates
= rate
;
4934 static int ipw2100_set_power_mode(struct ipw2100_priv
*priv
, int power_level
)
4936 struct host_command cmd
= {
4937 .host_command
= POWER_MODE
,
4938 .host_command_sequence
= 0,
4939 .host_command_length
= 4
4943 cmd
.host_command_parameters
[0] = power_level
;
4945 err
= ipw2100_hw_send_command(priv
, &cmd
);
4949 if (power_level
== IPW_POWER_MODE_CAM
)
4950 priv
->power_mode
= IPW_POWER_LEVEL(priv
->power_mode
);
4952 priv
->power_mode
= IPW_POWER_ENABLED
| power_level
;
4954 #ifdef IPW2100_TX_POWER
4955 if (priv
->port_type
== IBSS
&& priv
->adhoc_power
!= DFTL_IBSS_TX_POWER
) {
4956 /* Set beacon interval */
4957 cmd
.host_command
= TX_POWER_INDEX
;
4958 cmd
.host_command_parameters
[0] = (u32
) priv
->adhoc_power
;
4960 err
= ipw2100_hw_send_command(priv
, &cmd
);
4969 static int ipw2100_set_rts_threshold(struct ipw2100_priv
*priv
, u32 threshold
)
4971 struct host_command cmd
= {
4972 .host_command
= RTS_THRESHOLD
,
4973 .host_command_sequence
= 0,
4974 .host_command_length
= 4
4978 if (threshold
& RTS_DISABLED
)
4979 cmd
.host_command_parameters
[0] = MAX_RTS_THRESHOLD
;
4981 cmd
.host_command_parameters
[0] = threshold
& ~RTS_DISABLED
;
4983 err
= ipw2100_hw_send_command(priv
, &cmd
);
4987 priv
->rts_threshold
= threshold
;
4993 int ipw2100_set_fragmentation_threshold(struct ipw2100_priv
*priv
,
4994 u32 threshold
, int batch_mode
)
4996 struct host_command cmd
= {
4997 .host_command
= FRAG_THRESHOLD
,
4998 .host_command_sequence
= 0,
4999 .host_command_length
= 4,
5000 .host_command_parameters
[0] = 0,
5005 err
= ipw2100_disable_adapter(priv
);
5011 threshold
= DEFAULT_FRAG_THRESHOLD
;
5013 threshold
= max(threshold
, MIN_FRAG_THRESHOLD
);
5014 threshold
= min(threshold
, MAX_FRAG_THRESHOLD
);
5017 cmd
.host_command_parameters
[0] = threshold
;
5019 IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold
);
5021 err
= ipw2100_hw_send_command(priv
, &cmd
);
5024 ipw2100_enable_adapter(priv
);
5027 priv
->frag_threshold
= threshold
;
5033 static int ipw2100_set_short_retry(struct ipw2100_priv
*priv
, u32 retry
)
5035 struct host_command cmd
= {
5036 .host_command
= SHORT_RETRY_LIMIT
,
5037 .host_command_sequence
= 0,
5038 .host_command_length
= 4
5042 cmd
.host_command_parameters
[0] = retry
;
5044 err
= ipw2100_hw_send_command(priv
, &cmd
);
5048 priv
->short_retry_limit
= retry
;
5053 static int ipw2100_set_long_retry(struct ipw2100_priv
*priv
, u32 retry
)
5055 struct host_command cmd
= {
5056 .host_command
= LONG_RETRY_LIMIT
,
5057 .host_command_sequence
= 0,
5058 .host_command_length
= 4
5062 cmd
.host_command_parameters
[0] = retry
;
5064 err
= ipw2100_hw_send_command(priv
, &cmd
);
5068 priv
->long_retry_limit
= retry
;
5073 static int ipw2100_set_mandatory_bssid(struct ipw2100_priv
*priv
, u8
* bssid
,
5076 struct host_command cmd
= {
5077 .host_command
= MANDATORY_BSSID
,
5078 .host_command_sequence
= 0,
5079 .host_command_length
= (bssid
== NULL
) ? 0 : ETH_ALEN
5083 #ifdef CONFIG_IPW2100_DEBUG
5085 IPW_DEBUG_HC("MANDATORY_BSSID: %pM\n", bssid
);
5087 IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
5089 /* if BSSID is empty then we disable mandatory bssid mode */
5091 memcpy(cmd
.host_command_parameters
, bssid
, ETH_ALEN
);
5094 err
= ipw2100_disable_adapter(priv
);
5099 err
= ipw2100_hw_send_command(priv
, &cmd
);
5102 ipw2100_enable_adapter(priv
);
5107 static int ipw2100_disassociate_bssid(struct ipw2100_priv
*priv
)
5109 struct host_command cmd
= {
5110 .host_command
= DISASSOCIATION_BSSID
,
5111 .host_command_sequence
= 0,
5112 .host_command_length
= ETH_ALEN
5117 IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
5120 /* The Firmware currently ignores the BSSID and just disassociates from
5121 * the currently associated AP -- but in the off chance that a future
5122 * firmware does use the BSSID provided here, we go ahead and try and
5123 * set it to the currently associated AP's BSSID */
5124 memcpy(cmd
.host_command_parameters
, priv
->bssid
, ETH_ALEN
);
5126 err
= ipw2100_hw_send_command(priv
, &cmd
);
5131 static int ipw2100_set_wpa_ie(struct ipw2100_priv
*,
5132 struct ipw2100_wpa_assoc_frame
*, int)
5133 __attribute__ ((unused
));
5135 static int ipw2100_set_wpa_ie(struct ipw2100_priv
*priv
,
5136 struct ipw2100_wpa_assoc_frame
*wpa_frame
,
5139 struct host_command cmd
= {
5140 .host_command
= SET_WPA_IE
,
5141 .host_command_sequence
= 0,
5142 .host_command_length
= sizeof(struct ipw2100_wpa_assoc_frame
),
5146 IPW_DEBUG_HC("SET_WPA_IE\n");
5149 err
= ipw2100_disable_adapter(priv
);
5154 memcpy(cmd
.host_command_parameters
, wpa_frame
,
5155 sizeof(struct ipw2100_wpa_assoc_frame
));
5157 err
= ipw2100_hw_send_command(priv
, &cmd
);
5160 if (ipw2100_enable_adapter(priv
))
5167 struct security_info_params
{
5168 u32 allowed_ciphers
;
5171 u8 replay_counters_number
;
5172 u8 unicast_using_group
;
5175 static int ipw2100_set_security_information(struct ipw2100_priv
*priv
,
5178 int unicast_using_group
,
5181 struct host_command cmd
= {
5182 .host_command
= SET_SECURITY_INFORMATION
,
5183 .host_command_sequence
= 0,
5184 .host_command_length
= sizeof(struct security_info_params
)
5186 struct security_info_params
*security
=
5187 (struct security_info_params
*)&cmd
.host_command_parameters
;
5189 memset(security
, 0, sizeof(*security
));
5191 /* If shared key AP authentication is turned on, then we need to
5192 * configure the firmware to try and use it.
5194 * Actual data encryption/decryption is handled by the host. */
5195 security
->auth_mode
= auth_mode
;
5196 security
->unicast_using_group
= unicast_using_group
;
5198 switch (security_level
) {
5201 security
->allowed_ciphers
= IPW_NONE_CIPHER
;
5204 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5208 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5209 IPW_WEP104_CIPHER
| IPW_TKIP_CIPHER
;
5211 case SEC_LEVEL_2_CKIP
:
5212 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5213 IPW_WEP104_CIPHER
| IPW_CKIP_CIPHER
;
5216 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5217 IPW_WEP104_CIPHER
| IPW_TKIP_CIPHER
| IPW_CCMP_CIPHER
;
5222 ("SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
5223 security
->auth_mode
, security
->allowed_ciphers
, security_level
);
5225 security
->replay_counters_number
= 0;
5228 err
= ipw2100_disable_adapter(priv
);
5233 err
= ipw2100_hw_send_command(priv
, &cmd
);
5236 ipw2100_enable_adapter(priv
);
5241 static int ipw2100_set_tx_power(struct ipw2100_priv
*priv
, u32 tx_power
)
5243 struct host_command cmd
= {
5244 .host_command
= TX_POWER_INDEX
,
5245 .host_command_sequence
= 0,
5246 .host_command_length
= 4
5251 if (tx_power
!= IPW_TX_POWER_DEFAULT
)
5252 tmp
= (tx_power
- IPW_TX_POWER_MIN_DBM
) * 16 /
5253 (IPW_TX_POWER_MAX_DBM
- IPW_TX_POWER_MIN_DBM
);
5255 cmd
.host_command_parameters
[0] = tmp
;
5257 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
)
5258 err
= ipw2100_hw_send_command(priv
, &cmd
);
5260 priv
->tx_power
= tx_power
;
5265 static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv
*priv
,
5266 u32 interval
, int batch_mode
)
5268 struct host_command cmd
= {
5269 .host_command
= BEACON_INTERVAL
,
5270 .host_command_sequence
= 0,
5271 .host_command_length
= 4
5275 cmd
.host_command_parameters
[0] = interval
;
5277 IPW_DEBUG_INFO("enter\n");
5279 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5281 err
= ipw2100_disable_adapter(priv
);
5286 ipw2100_hw_send_command(priv
, &cmd
);
5289 err
= ipw2100_enable_adapter(priv
);
5295 IPW_DEBUG_INFO("exit\n");
5300 static void ipw2100_queues_initialize(struct ipw2100_priv
*priv
)
5302 ipw2100_tx_initialize(priv
);
5303 ipw2100_rx_initialize(priv
);
5304 ipw2100_msg_initialize(priv
);
5307 static void ipw2100_queues_free(struct ipw2100_priv
*priv
)
5309 ipw2100_tx_free(priv
);
5310 ipw2100_rx_free(priv
);
5311 ipw2100_msg_free(priv
);
5314 static int ipw2100_queues_allocate(struct ipw2100_priv
*priv
)
5316 if (ipw2100_tx_allocate(priv
) ||
5317 ipw2100_rx_allocate(priv
) || ipw2100_msg_allocate(priv
))
5323 ipw2100_tx_free(priv
);
5324 ipw2100_rx_free(priv
);
5325 ipw2100_msg_free(priv
);
5329 #define IPW_PRIVACY_CAPABLE 0x0008
5331 static int ipw2100_set_wep_flags(struct ipw2100_priv
*priv
, u32 flags
,
5334 struct host_command cmd
= {
5335 .host_command
= WEP_FLAGS
,
5336 .host_command_sequence
= 0,
5337 .host_command_length
= 4
5341 cmd
.host_command_parameters
[0] = flags
;
5343 IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags
);
5346 err
= ipw2100_disable_adapter(priv
);
5348 printk(KERN_ERR DRV_NAME
5349 ": %s: Could not disable adapter %d\n",
5350 priv
->net_dev
->name
, err
);
5355 /* send cmd to firmware */
5356 err
= ipw2100_hw_send_command(priv
, &cmd
);
5359 ipw2100_enable_adapter(priv
);
5364 struct ipw2100_wep_key
{
5370 /* Macros to ease up priting WEP keys */
5371 #define WEP_FMT_64 "%02X%02X%02X%02X-%02X"
5372 #define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
5373 #define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
5374 #define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
5379 * @priv: struct to work on
5380 * @idx: index of the key we want to set
5381 * @key: ptr to the key data to set
5382 * @len: length of the buffer at @key
5383 * @batch_mode: FIXME perform the operation in batch mode, not
5384 * disabling the device.
5386 * @returns 0 if OK, < 0 errno code on error.
5388 * Fill out a command structure with the new wep key, length an
5389 * index and send it down the wire.
5391 static int ipw2100_set_key(struct ipw2100_priv
*priv
,
5392 int idx
, char *key
, int len
, int batch_mode
)
5394 int keylen
= len
? (len
<= 5 ? 5 : 13) : 0;
5395 struct host_command cmd
= {
5396 .host_command
= WEP_KEY_INFO
,
5397 .host_command_sequence
= 0,
5398 .host_command_length
= sizeof(struct ipw2100_wep_key
),
5400 struct ipw2100_wep_key
*wep_key
= (void *)cmd
.host_command_parameters
;
5403 IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
5406 /* NOTE: We don't check cached values in case the firmware was reset
5407 * or some other problem is occurring. If the user is setting the key,
5408 * then we push the change */
5411 wep_key
->len
= keylen
;
5414 memcpy(wep_key
->key
, key
, len
);
5415 memset(wep_key
->key
+ len
, 0, keylen
- len
);
5418 /* Will be optimized out on debug not being configured in */
5420 IPW_DEBUG_WEP("%s: Clearing key %d\n",
5421 priv
->net_dev
->name
, wep_key
->idx
);
5422 else if (keylen
== 5)
5423 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64
"\n",
5424 priv
->net_dev
->name
, wep_key
->idx
, wep_key
->len
,
5425 WEP_STR_64(wep_key
->key
));
5427 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
5429 priv
->net_dev
->name
, wep_key
->idx
, wep_key
->len
,
5430 WEP_STR_128(wep_key
->key
));
5433 err
= ipw2100_disable_adapter(priv
);
5434 /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
5436 printk(KERN_ERR DRV_NAME
5437 ": %s: Could not disable adapter %d\n",
5438 priv
->net_dev
->name
, err
);
5443 /* send cmd to firmware */
5444 err
= ipw2100_hw_send_command(priv
, &cmd
);
5447 int err2
= ipw2100_enable_adapter(priv
);
5454 static int ipw2100_set_key_index(struct ipw2100_priv
*priv
,
5455 int idx
, int batch_mode
)
5457 struct host_command cmd
= {
5458 .host_command
= WEP_KEY_INDEX
,
5459 .host_command_sequence
= 0,
5460 .host_command_length
= 4,
5461 .host_command_parameters
= {idx
},
5465 IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx
);
5467 if (idx
< 0 || idx
> 3)
5471 err
= ipw2100_disable_adapter(priv
);
5473 printk(KERN_ERR DRV_NAME
5474 ": %s: Could not disable adapter %d\n",
5475 priv
->net_dev
->name
, err
);
5480 /* send cmd to firmware */
5481 err
= ipw2100_hw_send_command(priv
, &cmd
);
5484 ipw2100_enable_adapter(priv
);
5489 static int ipw2100_configure_security(struct ipw2100_priv
*priv
, int batch_mode
)
5491 int i
, err
, auth_mode
, sec_level
, use_group
;
5493 if (!(priv
->status
& STATUS_RUNNING
))
5497 err
= ipw2100_disable_adapter(priv
);
5502 if (!priv
->ieee
->sec
.enabled
) {
5504 ipw2100_set_security_information(priv
, IPW_AUTH_OPEN
,
5507 auth_mode
= IPW_AUTH_OPEN
;
5508 if (priv
->ieee
->sec
.flags
& SEC_AUTH_MODE
) {
5509 if (priv
->ieee
->sec
.auth_mode
== WLAN_AUTH_SHARED_KEY
)
5510 auth_mode
= IPW_AUTH_SHARED
;
5511 else if (priv
->ieee
->sec
.auth_mode
== WLAN_AUTH_LEAP
)
5512 auth_mode
= IPW_AUTH_LEAP_CISCO_ID
;
5515 sec_level
= SEC_LEVEL_0
;
5516 if (priv
->ieee
->sec
.flags
& SEC_LEVEL
)
5517 sec_level
= priv
->ieee
->sec
.level
;
5520 if (priv
->ieee
->sec
.flags
& SEC_UNICAST_GROUP
)
5521 use_group
= priv
->ieee
->sec
.unicast_uses_group
;
5524 ipw2100_set_security_information(priv
, auth_mode
, sec_level
,
5531 if (priv
->ieee
->sec
.enabled
) {
5532 for (i
= 0; i
< 4; i
++) {
5533 if (!(priv
->ieee
->sec
.flags
& (1 << i
))) {
5534 memset(priv
->ieee
->sec
.keys
[i
], 0, WEP_KEY_LEN
);
5535 priv
->ieee
->sec
.key_sizes
[i
] = 0;
5537 err
= ipw2100_set_key(priv
, i
,
5538 priv
->ieee
->sec
.keys
[i
],
5546 ipw2100_set_key_index(priv
, priv
->ieee
->crypt_info
.tx_keyidx
, 1);
5549 /* Always enable privacy so the Host can filter WEP packets if
5550 * encrypted data is sent up */
5552 ipw2100_set_wep_flags(priv
,
5554 enabled
? IPW_PRIVACY_CAPABLE
: 0, 1);
5558 priv
->status
&= ~STATUS_SECURITY_UPDATED
;
5562 ipw2100_enable_adapter(priv
);
5567 static void ipw2100_security_work(struct work_struct
*work
)
5569 struct ipw2100_priv
*priv
=
5570 container_of(work
, struct ipw2100_priv
, security_work
.work
);
5572 /* If we happen to have reconnected before we get a chance to
5573 * process this, then update the security settings--which causes
5574 * a disassociation to occur */
5575 if (!(priv
->status
& STATUS_ASSOCIATED
) &&
5576 priv
->status
& STATUS_SECURITY_UPDATED
)
5577 ipw2100_configure_security(priv
, 0);
5580 static void shim__set_security(struct net_device
*dev
,
5581 struct libipw_security
*sec
)
5583 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5584 int i
, force_update
= 0;
5586 mutex_lock(&priv
->action_mutex
);
5587 if (!(priv
->status
& STATUS_INITIALIZED
))
5590 for (i
= 0; i
< 4; i
++) {
5591 if (sec
->flags
& (1 << i
)) {
5592 priv
->ieee
->sec
.key_sizes
[i
] = sec
->key_sizes
[i
];
5593 if (sec
->key_sizes
[i
] == 0)
5594 priv
->ieee
->sec
.flags
&= ~(1 << i
);
5596 memcpy(priv
->ieee
->sec
.keys
[i
], sec
->keys
[i
],
5598 if (sec
->level
== SEC_LEVEL_1
) {
5599 priv
->ieee
->sec
.flags
|= (1 << i
);
5600 priv
->status
|= STATUS_SECURITY_UPDATED
;
5602 priv
->ieee
->sec
.flags
&= ~(1 << i
);
5606 if ((sec
->flags
& SEC_ACTIVE_KEY
) &&
5607 priv
->ieee
->sec
.active_key
!= sec
->active_key
) {
5608 if (sec
->active_key
<= 3) {
5609 priv
->ieee
->sec
.active_key
= sec
->active_key
;
5610 priv
->ieee
->sec
.flags
|= SEC_ACTIVE_KEY
;
5612 priv
->ieee
->sec
.flags
&= ~SEC_ACTIVE_KEY
;
5614 priv
->status
|= STATUS_SECURITY_UPDATED
;
5617 if ((sec
->flags
& SEC_AUTH_MODE
) &&
5618 (priv
->ieee
->sec
.auth_mode
!= sec
->auth_mode
)) {
5619 priv
->ieee
->sec
.auth_mode
= sec
->auth_mode
;
5620 priv
->ieee
->sec
.flags
|= SEC_AUTH_MODE
;
5621 priv
->status
|= STATUS_SECURITY_UPDATED
;
5624 if (sec
->flags
& SEC_ENABLED
&& priv
->ieee
->sec
.enabled
!= sec
->enabled
) {
5625 priv
->ieee
->sec
.flags
|= SEC_ENABLED
;
5626 priv
->ieee
->sec
.enabled
= sec
->enabled
;
5627 priv
->status
|= STATUS_SECURITY_UPDATED
;
5631 if (sec
->flags
& SEC_ENCRYPT
)
5632 priv
->ieee
->sec
.encrypt
= sec
->encrypt
;
5634 if (sec
->flags
& SEC_LEVEL
&& priv
->ieee
->sec
.level
!= sec
->level
) {
5635 priv
->ieee
->sec
.level
= sec
->level
;
5636 priv
->ieee
->sec
.flags
|= SEC_LEVEL
;
5637 priv
->status
|= STATUS_SECURITY_UPDATED
;
5640 IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
5641 priv
->ieee
->sec
.flags
& (1 << 8) ? '1' : '0',
5642 priv
->ieee
->sec
.flags
& (1 << 7) ? '1' : '0',
5643 priv
->ieee
->sec
.flags
& (1 << 6) ? '1' : '0',
5644 priv
->ieee
->sec
.flags
& (1 << 5) ? '1' : '0',
5645 priv
->ieee
->sec
.flags
& (1 << 4) ? '1' : '0',
5646 priv
->ieee
->sec
.flags
& (1 << 3) ? '1' : '0',
5647 priv
->ieee
->sec
.flags
& (1 << 2) ? '1' : '0',
5648 priv
->ieee
->sec
.flags
& (1 << 1) ? '1' : '0',
5649 priv
->ieee
->sec
.flags
& (1 << 0) ? '1' : '0');
5651 /* As a temporary work around to enable WPA until we figure out why
5652 * wpa_supplicant toggles the security capability of the driver, which
5653 * forces a disassocation with force_update...
5655 * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
5656 if (!(priv
->status
& (STATUS_ASSOCIATED
| STATUS_ASSOCIATING
)))
5657 ipw2100_configure_security(priv
, 0);
5659 mutex_unlock(&priv
->action_mutex
);
5662 static int ipw2100_adapter_setup(struct ipw2100_priv
*priv
)
5668 IPW_DEBUG_INFO("enter\n");
5670 err
= ipw2100_disable_adapter(priv
);
5673 #ifdef CONFIG_IPW2100_MONITOR
5674 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
5675 err
= ipw2100_set_channel(priv
, priv
->channel
, batch_mode
);
5679 IPW_DEBUG_INFO("exit\n");
5683 #endif /* CONFIG_IPW2100_MONITOR */
5685 err
= ipw2100_read_mac_address(priv
);
5689 err
= ipw2100_set_mac_address(priv
, batch_mode
);
5693 err
= ipw2100_set_port_type(priv
, priv
->ieee
->iw_mode
, batch_mode
);
5697 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5698 err
= ipw2100_set_channel(priv
, priv
->channel
, batch_mode
);
5703 err
= ipw2100_system_config(priv
, batch_mode
);
5707 err
= ipw2100_set_tx_rates(priv
, priv
->tx_rates
, batch_mode
);
5711 /* Default to power mode OFF */
5712 err
= ipw2100_set_power_mode(priv
, IPW_POWER_MODE_CAM
);
5716 err
= ipw2100_set_rts_threshold(priv
, priv
->rts_threshold
);
5720 if (priv
->config
& CFG_STATIC_BSSID
)
5721 bssid
= priv
->bssid
;
5724 err
= ipw2100_set_mandatory_bssid(priv
, bssid
, batch_mode
);
5728 if (priv
->config
& CFG_STATIC_ESSID
)
5729 err
= ipw2100_set_essid(priv
, priv
->essid
, priv
->essid_len
,
5732 err
= ipw2100_set_essid(priv
, NULL
, 0, batch_mode
);
5736 err
= ipw2100_configure_security(priv
, batch_mode
);
5740 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5742 ipw2100_set_ibss_beacon_interval(priv
,
5743 priv
->beacon_interval
,
5748 err
= ipw2100_set_tx_power(priv
, priv
->tx_power
);
5754 err = ipw2100_set_fragmentation_threshold(
5755 priv, priv->frag_threshold, batch_mode);
5760 IPW_DEBUG_INFO("exit\n");
5765 /*************************************************************************
5767 * EXTERNALLY CALLED METHODS
5769 *************************************************************************/
5771 /* This method is called by the network layer -- not to be confused with
5772 * ipw2100_set_mac_address() declared above called by this driver (and this
5773 * method as well) to talk to the firmware */
5774 static int ipw2100_set_address(struct net_device
*dev
, void *p
)
5776 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5777 struct sockaddr
*addr
= p
;
5780 if (!is_valid_ether_addr(addr
->sa_data
))
5781 return -EADDRNOTAVAIL
;
5783 mutex_lock(&priv
->action_mutex
);
5785 priv
->config
|= CFG_CUSTOM_MAC
;
5786 memcpy(priv
->mac_addr
, addr
->sa_data
, ETH_ALEN
);
5788 err
= ipw2100_set_mac_address(priv
, 0);
5792 priv
->reset_backoff
= 0;
5793 mutex_unlock(&priv
->action_mutex
);
5794 ipw2100_reset_adapter(&priv
->reset_work
.work
);
5798 mutex_unlock(&priv
->action_mutex
);
5802 static int ipw2100_open(struct net_device
*dev
)
5804 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5805 unsigned long flags
;
5806 IPW_DEBUG_INFO("dev->open\n");
5808 spin_lock_irqsave(&priv
->low_lock
, flags
);
5809 if (priv
->status
& STATUS_ASSOCIATED
) {
5810 netif_carrier_on(dev
);
5811 netif_start_queue(dev
);
5813 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5818 static int ipw2100_close(struct net_device
*dev
)
5820 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5821 unsigned long flags
;
5822 struct list_head
*element
;
5823 struct ipw2100_tx_packet
*packet
;
5825 IPW_DEBUG_INFO("enter\n");
5827 spin_lock_irqsave(&priv
->low_lock
, flags
);
5829 if (priv
->status
& STATUS_ASSOCIATED
)
5830 netif_carrier_off(dev
);
5831 netif_stop_queue(dev
);
5833 /* Flush the TX queue ... */
5834 while (!list_empty(&priv
->tx_pend_list
)) {
5835 element
= priv
->tx_pend_list
.next
;
5836 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
5839 DEC_STAT(&priv
->tx_pend_stat
);
5841 libipw_txb_free(packet
->info
.d_struct
.txb
);
5842 packet
->info
.d_struct
.txb
= NULL
;
5844 list_add_tail(element
, &priv
->tx_free_list
);
5845 INC_STAT(&priv
->tx_free_stat
);
5847 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5849 IPW_DEBUG_INFO("exit\n");
5855 * TODO: Fix this function... its just wrong
5857 static void ipw2100_tx_timeout(struct net_device
*dev
)
5859 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5861 dev
->stats
.tx_errors
++;
5863 #ifdef CONFIG_IPW2100_MONITOR
5864 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
5868 IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n",
5870 schedule_reset(priv
);
5873 static int ipw2100_wpa_enable(struct ipw2100_priv
*priv
, int value
)
5875 /* This is called when wpa_supplicant loads and closes the driver
5877 priv
->ieee
->wpa_enabled
= value
;
5881 static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv
*priv
, int value
)
5884 struct libipw_device
*ieee
= priv
->ieee
;
5885 struct libipw_security sec
= {
5886 .flags
= SEC_AUTH_MODE
,
5890 if (value
& IW_AUTH_ALG_SHARED_KEY
) {
5891 sec
.auth_mode
= WLAN_AUTH_SHARED_KEY
;
5893 } else if (value
& IW_AUTH_ALG_OPEN_SYSTEM
) {
5894 sec
.auth_mode
= WLAN_AUTH_OPEN
;
5896 } else if (value
& IW_AUTH_ALG_LEAP
) {
5897 sec
.auth_mode
= WLAN_AUTH_LEAP
;
5902 if (ieee
->set_security
)
5903 ieee
->set_security(ieee
->dev
, &sec
);
5910 static void ipw2100_wpa_assoc_frame(struct ipw2100_priv
*priv
,
5911 char *wpa_ie
, int wpa_ie_len
)
5914 struct ipw2100_wpa_assoc_frame frame
;
5916 frame
.fixed_ie_mask
= 0;
5919 memcpy(frame
.var_ie
, wpa_ie
, wpa_ie_len
);
5920 frame
.var_ie_len
= wpa_ie_len
;
5922 /* make sure WPA is enabled */
5923 ipw2100_wpa_enable(priv
, 1);
5924 ipw2100_set_wpa_ie(priv
, &frame
, 0);
5927 static void ipw_ethtool_get_drvinfo(struct net_device
*dev
,
5928 struct ethtool_drvinfo
*info
)
5930 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5931 char fw_ver
[64], ucode_ver
[64];
5933 strlcpy(info
->driver
, DRV_NAME
, sizeof(info
->driver
));
5934 strlcpy(info
->version
, DRV_VERSION
, sizeof(info
->version
));
5936 ipw2100_get_fwversion(priv
, fw_ver
, sizeof(fw_ver
));
5937 ipw2100_get_ucodeversion(priv
, ucode_ver
, sizeof(ucode_ver
));
5939 snprintf(info
->fw_version
, sizeof(info
->fw_version
), "%s:%d:%s",
5940 fw_ver
, priv
->eeprom_version
, ucode_ver
);
5942 strlcpy(info
->bus_info
, pci_name(priv
->pci_dev
),
5943 sizeof(info
->bus_info
));
5946 static u32
ipw2100_ethtool_get_link(struct net_device
*dev
)
5948 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5949 return (priv
->status
& STATUS_ASSOCIATED
) ? 1 : 0;
5952 static const struct ethtool_ops ipw2100_ethtool_ops
= {
5953 .get_link
= ipw2100_ethtool_get_link
,
5954 .get_drvinfo
= ipw_ethtool_get_drvinfo
,
5957 static void ipw2100_hang_check(struct work_struct
*work
)
5959 struct ipw2100_priv
*priv
=
5960 container_of(work
, struct ipw2100_priv
, hang_check
.work
);
5961 unsigned long flags
;
5962 u32 rtc
= 0xa5a5a5a5;
5963 u32 len
= sizeof(rtc
);
5966 spin_lock_irqsave(&priv
->low_lock
, flags
);
5968 if (priv
->fatal_error
!= 0) {
5969 /* If fatal_error is set then we need to restart */
5970 IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
5971 priv
->net_dev
->name
);
5974 } else if (ipw2100_get_ordinal(priv
, IPW_ORD_RTC_TIME
, &rtc
, &len
) ||
5975 (rtc
== priv
->last_rtc
)) {
5976 /* Check if firmware is hung */
5977 IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
5978 priv
->net_dev
->name
);
5985 priv
->stop_hang_check
= 1;
5988 /* Restart the NIC */
5989 schedule_reset(priv
);
5992 priv
->last_rtc
= rtc
;
5994 if (!priv
->stop_hang_check
)
5995 schedule_delayed_work(&priv
->hang_check
, HZ
/ 2);
5997 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
6000 static void ipw2100_rf_kill(struct work_struct
*work
)
6002 struct ipw2100_priv
*priv
=
6003 container_of(work
, struct ipw2100_priv
, rf_kill
.work
);
6004 unsigned long flags
;
6006 spin_lock_irqsave(&priv
->low_lock
, flags
);
6008 if (rf_kill_active(priv
)) {
6009 IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
6010 if (!priv
->stop_rf_kill
)
6011 schedule_delayed_work(&priv
->rf_kill
,
6012 round_jiffies_relative(HZ
));
6016 /* RF Kill is now disabled, so bring the device back up */
6018 if (!(priv
->status
& STATUS_RF_KILL_MASK
)) {
6019 IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
6021 schedule_reset(priv
);
6023 IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still "
6027 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
6030 static void ipw2100_irq_tasklet(struct ipw2100_priv
*priv
);
6032 static const struct net_device_ops ipw2100_netdev_ops
= {
6033 .ndo_open
= ipw2100_open
,
6034 .ndo_stop
= ipw2100_close
,
6035 .ndo_start_xmit
= libipw_xmit
,
6036 .ndo_change_mtu
= libipw_change_mtu
,
6037 .ndo_tx_timeout
= ipw2100_tx_timeout
,
6038 .ndo_set_mac_address
= ipw2100_set_address
,
6039 .ndo_validate_addr
= eth_validate_addr
,
6042 /* Look into using netdev destructor to shutdown libipw? */
6044 static struct net_device
*ipw2100_alloc_device(struct pci_dev
*pci_dev
,
6045 void __iomem
* ioaddr
)
6047 struct ipw2100_priv
*priv
;
6048 struct net_device
*dev
;
6050 dev
= alloc_libipw(sizeof(struct ipw2100_priv
), 0);
6053 priv
= libipw_priv(dev
);
6054 priv
->ieee
= netdev_priv(dev
);
6055 priv
->pci_dev
= pci_dev
;
6056 priv
->net_dev
= dev
;
6057 priv
->ioaddr
= ioaddr
;
6059 priv
->ieee
->hard_start_xmit
= ipw2100_tx
;
6060 priv
->ieee
->set_security
= shim__set_security
;
6062 priv
->ieee
->perfect_rssi
= -20;
6063 priv
->ieee
->worst_rssi
= -85;
6065 dev
->netdev_ops
= &ipw2100_netdev_ops
;
6066 dev
->ethtool_ops
= &ipw2100_ethtool_ops
;
6067 dev
->wireless_handlers
= &ipw2100_wx_handler_def
;
6068 priv
->wireless_data
.libipw
= priv
->ieee
;
6069 dev
->wireless_data
= &priv
->wireless_data
;
6070 dev
->watchdog_timeo
= 3 * HZ
;
6073 /* NOTE: We don't use the wireless_handlers hook
6074 * in dev as the system will start throwing WX requests
6075 * to us before we're actually initialized and it just
6076 * ends up causing problems. So, we just handle
6077 * the WX extensions through the ipw2100_ioctl interface */
6079 /* memset() puts everything to 0, so we only have explicitly set
6080 * those values that need to be something else */
6082 /* If power management is turned on, default to AUTO mode */
6083 priv
->power_mode
= IPW_POWER_AUTO
;
6085 #ifdef CONFIG_IPW2100_MONITOR
6086 priv
->config
|= CFG_CRC_CHECK
;
6088 priv
->ieee
->wpa_enabled
= 0;
6089 priv
->ieee
->drop_unencrypted
= 0;
6090 priv
->ieee
->privacy_invoked
= 0;
6091 priv
->ieee
->ieee802_1x
= 1;
6093 /* Set module parameters */
6094 switch (network_mode
) {
6096 priv
->ieee
->iw_mode
= IW_MODE_ADHOC
;
6098 #ifdef CONFIG_IPW2100_MONITOR
6100 priv
->ieee
->iw_mode
= IW_MODE_MONITOR
;
6105 priv
->ieee
->iw_mode
= IW_MODE_INFRA
;
6110 priv
->status
|= STATUS_RF_KILL_SW
;
6113 ((channel
>= REG_MIN_CHANNEL
) && (channel
<= REG_MAX_CHANNEL
))) {
6114 priv
->config
|= CFG_STATIC_CHANNEL
;
6115 priv
->channel
= channel
;
6119 priv
->config
|= CFG_ASSOCIATE
;
6121 priv
->beacon_interval
= DEFAULT_BEACON_INTERVAL
;
6122 priv
->short_retry_limit
= DEFAULT_SHORT_RETRY_LIMIT
;
6123 priv
->long_retry_limit
= DEFAULT_LONG_RETRY_LIMIT
;
6124 priv
->rts_threshold
= DEFAULT_RTS_THRESHOLD
| RTS_DISABLED
;
6125 priv
->frag_threshold
= DEFAULT_FTS
| FRAG_DISABLED
;
6126 priv
->tx_power
= IPW_TX_POWER_DEFAULT
;
6127 priv
->tx_rates
= DEFAULT_TX_RATES
;
6129 strcpy(priv
->nick
, "ipw2100");
6131 spin_lock_init(&priv
->low_lock
);
6132 mutex_init(&priv
->action_mutex
);
6133 mutex_init(&priv
->adapter_mutex
);
6135 init_waitqueue_head(&priv
->wait_command_queue
);
6137 netif_carrier_off(dev
);
6139 INIT_LIST_HEAD(&priv
->msg_free_list
);
6140 INIT_LIST_HEAD(&priv
->msg_pend_list
);
6141 INIT_STAT(&priv
->msg_free_stat
);
6142 INIT_STAT(&priv
->msg_pend_stat
);
6144 INIT_LIST_HEAD(&priv
->tx_free_list
);
6145 INIT_LIST_HEAD(&priv
->tx_pend_list
);
6146 INIT_STAT(&priv
->tx_free_stat
);
6147 INIT_STAT(&priv
->tx_pend_stat
);
6149 INIT_LIST_HEAD(&priv
->fw_pend_list
);
6150 INIT_STAT(&priv
->fw_pend_stat
);
6152 INIT_DELAYED_WORK(&priv
->reset_work
, ipw2100_reset_adapter
);
6153 INIT_DELAYED_WORK(&priv
->security_work
, ipw2100_security_work
);
6154 INIT_DELAYED_WORK(&priv
->wx_event_work
, ipw2100_wx_event_work
);
6155 INIT_DELAYED_WORK(&priv
->hang_check
, ipw2100_hang_check
);
6156 INIT_DELAYED_WORK(&priv
->rf_kill
, ipw2100_rf_kill
);
6157 INIT_DELAYED_WORK(&priv
->scan_event
, ipw2100_scan_event
);
6159 tasklet_init(&priv
->irq_tasklet
, (void (*)(unsigned long))
6160 ipw2100_irq_tasklet
, (unsigned long)priv
);
6162 /* NOTE: We do not start the deferred work for status checks yet */
6163 priv
->stop_rf_kill
= 1;
6164 priv
->stop_hang_check
= 1;
6169 static int ipw2100_pci_init_one(struct pci_dev
*pci_dev
,
6170 const struct pci_device_id
*ent
)
6172 void __iomem
*ioaddr
;
6173 struct net_device
*dev
= NULL
;
6174 struct ipw2100_priv
*priv
= NULL
;
6179 IPW_DEBUG_INFO("enter\n");
6181 if (!(pci_resource_flags(pci_dev
, 0) & IORESOURCE_MEM
)) {
6182 IPW_DEBUG_INFO("weird - resource type is not memory\n");
6187 ioaddr
= pci_iomap(pci_dev
, 0, 0);
6189 printk(KERN_WARNING DRV_NAME
6190 "Error calling ioremap_nocache.\n");
6195 /* allocate and initialize our net_device */
6196 dev
= ipw2100_alloc_device(pci_dev
, ioaddr
);
6198 printk(KERN_WARNING DRV_NAME
6199 "Error calling ipw2100_alloc_device.\n");
6204 /* set up PCI mappings for device */
6205 err
= pci_enable_device(pci_dev
);
6207 printk(KERN_WARNING DRV_NAME
6208 "Error calling pci_enable_device.\n");
6212 priv
= libipw_priv(dev
);
6214 pci_set_master(pci_dev
);
6215 pci_set_drvdata(pci_dev
, priv
);
6217 err
= pci_set_dma_mask(pci_dev
, DMA_BIT_MASK(32));
6219 printk(KERN_WARNING DRV_NAME
6220 "Error calling pci_set_dma_mask.\n");
6221 pci_disable_device(pci_dev
);
6225 err
= pci_request_regions(pci_dev
, DRV_NAME
);
6227 printk(KERN_WARNING DRV_NAME
6228 "Error calling pci_request_regions.\n");
6229 pci_disable_device(pci_dev
);
6233 /* We disable the RETRY_TIMEOUT register (0x41) to keep
6234 * PCI Tx retries from interfering with C3 CPU state */
6235 pci_read_config_dword(pci_dev
, 0x40, &val
);
6236 if ((val
& 0x0000ff00) != 0)
6237 pci_write_config_dword(pci_dev
, 0x40, val
& 0xffff00ff);
6239 if (!ipw2100_hw_is_adapter_in_system(dev
)) {
6240 printk(KERN_WARNING DRV_NAME
6241 "Device not found via register read.\n");
6246 SET_NETDEV_DEV(dev
, &pci_dev
->dev
);
6248 /* Force interrupts to be shut off on the device */
6249 priv
->status
|= STATUS_INT_ENABLED
;
6250 ipw2100_disable_interrupts(priv
);
6252 /* Allocate and initialize the Tx/Rx queues and lists */
6253 if (ipw2100_queues_allocate(priv
)) {
6254 printk(KERN_WARNING DRV_NAME
6255 "Error calling ipw2100_queues_allocate.\n");
6259 ipw2100_queues_initialize(priv
);
6261 err
= request_irq(pci_dev
->irq
,
6262 ipw2100_interrupt
, IRQF_SHARED
, dev
->name
, priv
);
6264 printk(KERN_WARNING DRV_NAME
6265 "Error calling request_irq: %d.\n", pci_dev
->irq
);
6268 dev
->irq
= pci_dev
->irq
;
6270 IPW_DEBUG_INFO("Attempting to register device...\n");
6272 printk(KERN_INFO DRV_NAME
6273 ": Detected Intel PRO/Wireless 2100 Network Connection\n");
6275 err
= ipw2100_up(priv
, 1);
6279 err
= ipw2100_wdev_init(dev
);
6284 /* Bring up the interface. Pre 0.46, after we registered the
6285 * network device we would call ipw2100_up. This introduced a race
6286 * condition with newer hotplug configurations (network was coming
6287 * up and making calls before the device was initialized).
6289 err
= register_netdev(dev
);
6291 printk(KERN_WARNING DRV_NAME
6292 "Error calling register_netdev.\n");
6297 mutex_lock(&priv
->action_mutex
);
6299 IPW_DEBUG_INFO("%s: Bound to %s\n", dev
->name
, pci_name(pci_dev
));
6301 /* perform this after register_netdev so that dev->name is set */
6302 err
= sysfs_create_group(&pci_dev
->dev
.kobj
, &ipw2100_attribute_group
);
6306 /* If the RF Kill switch is disabled, go ahead and complete the
6307 * startup sequence */
6308 if (!(priv
->status
& STATUS_RF_KILL_MASK
)) {
6309 /* Enable the adapter - sends HOST_COMPLETE */
6310 if (ipw2100_enable_adapter(priv
)) {
6311 printk(KERN_WARNING DRV_NAME
6312 ": %s: failed in call to enable adapter.\n",
6313 priv
->net_dev
->name
);
6314 ipw2100_hw_stop_adapter(priv
);
6319 /* Start a scan . . . */
6320 ipw2100_set_scan_options(priv
);
6321 ipw2100_start_scan(priv
);
6324 IPW_DEBUG_INFO("exit\n");
6326 priv
->status
|= STATUS_INITIALIZED
;
6328 mutex_unlock(&priv
->action_mutex
);
6333 mutex_unlock(&priv
->action_mutex
);
6336 if (registered
>= 2)
6337 unregister_netdev(dev
);
6340 wiphy_unregister(priv
->ieee
->wdev
.wiphy
);
6341 kfree(priv
->ieee
->bg_band
.channels
);
6344 ipw2100_hw_stop_adapter(priv
);
6346 ipw2100_disable_interrupts(priv
);
6349 free_irq(dev
->irq
, priv
);
6351 ipw2100_kill_works(priv
);
6353 /* These are safe to call even if they weren't allocated */
6354 ipw2100_queues_free(priv
);
6355 sysfs_remove_group(&pci_dev
->dev
.kobj
,
6356 &ipw2100_attribute_group
);
6358 free_libipw(dev
, 0);
6361 pci_iounmap(pci_dev
, ioaddr
);
6363 pci_release_regions(pci_dev
);
6364 pci_disable_device(pci_dev
);
6368 static void ipw2100_pci_remove_one(struct pci_dev
*pci_dev
)
6370 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6371 struct net_device
*dev
= priv
->net_dev
;
6373 mutex_lock(&priv
->action_mutex
);
6375 priv
->status
&= ~STATUS_INITIALIZED
;
6377 sysfs_remove_group(&pci_dev
->dev
.kobj
, &ipw2100_attribute_group
);
6380 if (ipw2100_firmware
.version
)
6381 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
6383 /* Take down the hardware */
6386 /* Release the mutex so that the network subsystem can
6387 * complete any needed calls into the driver... */
6388 mutex_unlock(&priv
->action_mutex
);
6390 /* Unregister the device first - this results in close()
6391 * being called if the device is open. If we free storage
6392 * first, then close() will crash.
6393 * FIXME: remove the comment above. */
6394 unregister_netdev(dev
);
6396 ipw2100_kill_works(priv
);
6398 ipw2100_queues_free(priv
);
6400 /* Free potential debugging firmware snapshot */
6401 ipw2100_snapshot_free(priv
);
6403 free_irq(dev
->irq
, priv
);
6405 pci_iounmap(pci_dev
, priv
->ioaddr
);
6407 /* wiphy_unregister needs to be here, before free_libipw */
6408 wiphy_unregister(priv
->ieee
->wdev
.wiphy
);
6409 kfree(priv
->ieee
->bg_band
.channels
);
6410 free_libipw(dev
, 0);
6412 pci_release_regions(pci_dev
);
6413 pci_disable_device(pci_dev
);
6415 IPW_DEBUG_INFO("exit\n");
6419 static int ipw2100_suspend(struct pci_dev
*pci_dev
, pm_message_t state
)
6421 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6422 struct net_device
*dev
= priv
->net_dev
;
6424 IPW_DEBUG_INFO("%s: Going into suspend...\n", dev
->name
);
6426 mutex_lock(&priv
->action_mutex
);
6427 if (priv
->status
& STATUS_INITIALIZED
) {
6428 /* Take down the device; powers it off, etc. */
6432 /* Remove the PRESENT state of the device */
6433 netif_device_detach(dev
);
6435 pci_save_state(pci_dev
);
6436 pci_disable_device(pci_dev
);
6437 pci_set_power_state(pci_dev
, PCI_D3hot
);
6439 priv
->suspend_at
= get_seconds();
6441 mutex_unlock(&priv
->action_mutex
);
6446 static int ipw2100_resume(struct pci_dev
*pci_dev
)
6448 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6449 struct net_device
*dev
= priv
->net_dev
;
6453 if (IPW2100_PM_DISABLED
)
6456 mutex_lock(&priv
->action_mutex
);
6458 IPW_DEBUG_INFO("%s: Coming out of suspend...\n", dev
->name
);
6460 pci_set_power_state(pci_dev
, PCI_D0
);
6461 err
= pci_enable_device(pci_dev
);
6463 printk(KERN_ERR
"%s: pci_enable_device failed on resume\n",
6465 mutex_unlock(&priv
->action_mutex
);
6468 pci_restore_state(pci_dev
);
6471 * Suspend/Resume resets the PCI configuration space, so we have to
6472 * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
6473 * from interfering with C3 CPU state. pci_restore_state won't help
6474 * here since it only restores the first 64 bytes pci config header.
6476 pci_read_config_dword(pci_dev
, 0x40, &val
);
6477 if ((val
& 0x0000ff00) != 0)
6478 pci_write_config_dword(pci_dev
, 0x40, val
& 0xffff00ff);
6480 /* Set the device back into the PRESENT state; this will also wake
6481 * the queue of needed */
6482 netif_device_attach(dev
);
6484 priv
->suspend_time
= get_seconds() - priv
->suspend_at
;
6486 /* Bring the device back up */
6487 if (!(priv
->status
& STATUS_RF_KILL_SW
))
6488 ipw2100_up(priv
, 0);
6490 mutex_unlock(&priv
->action_mutex
);
6496 static void ipw2100_shutdown(struct pci_dev
*pci_dev
)
6498 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6500 /* Take down the device; powers it off, etc. */
6503 pci_disable_device(pci_dev
);
6506 #define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
6508 static const struct pci_device_id ipw2100_pci_id_table
[] = {
6509 IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */
6510 IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */
6511 IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */
6512 IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */
6513 IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */
6514 IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */
6515 IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */
6516 IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */
6517 IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */
6518 IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */
6519 IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */
6520 IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */
6521 IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */
6523 IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */
6524 IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */
6525 IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */
6526 IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */
6527 IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */
6529 IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */
6530 IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */
6531 IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */
6532 IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */
6533 IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */
6534 IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */
6535 IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */
6537 IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */
6539 IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */
6540 IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */
6541 IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */
6542 IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */
6543 IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */
6544 IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */
6545 IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */
6547 IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */
6548 IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */
6549 IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */
6550 IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */
6551 IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */
6552 IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */
6554 IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */
6558 MODULE_DEVICE_TABLE(pci
, ipw2100_pci_id_table
);
6560 static struct pci_driver ipw2100_pci_driver
= {
6562 .id_table
= ipw2100_pci_id_table
,
6563 .probe
= ipw2100_pci_init_one
,
6564 .remove
= ipw2100_pci_remove_one
,
6566 .suspend
= ipw2100_suspend
,
6567 .resume
= ipw2100_resume
,
6569 .shutdown
= ipw2100_shutdown
,
6573 * Initialize the ipw2100 driver/module
6575 * @returns 0 if ok, < 0 errno node con error.
6577 * Note: we cannot init the /proc stuff until the PCI driver is there,
6578 * or we risk an unlikely race condition on someone accessing
6579 * uninitialized data in the PCI dev struct through /proc.
6581 static int __init
ipw2100_init(void)
6585 printk(KERN_INFO DRV_NAME
": %s, %s\n", DRV_DESCRIPTION
, DRV_VERSION
);
6586 printk(KERN_INFO DRV_NAME
": %s\n", DRV_COPYRIGHT
);
6588 pm_qos_add_request(&ipw2100_pm_qos_req
, PM_QOS_CPU_DMA_LATENCY
,
6589 PM_QOS_DEFAULT_VALUE
);
6591 ret
= pci_register_driver(&ipw2100_pci_driver
);
6595 #ifdef CONFIG_IPW2100_DEBUG
6596 ipw2100_debug_level
= debug
;
6597 ret
= driver_create_file(&ipw2100_pci_driver
.driver
,
6598 &driver_attr_debug_level
);
6606 * Cleanup ipw2100 driver registration
6608 static void __exit
ipw2100_exit(void)
6610 /* FIXME: IPG: check that we have no instances of the devices open */
6611 #ifdef CONFIG_IPW2100_DEBUG
6612 driver_remove_file(&ipw2100_pci_driver
.driver
,
6613 &driver_attr_debug_level
);
6615 pci_unregister_driver(&ipw2100_pci_driver
);
6616 pm_qos_remove_request(&ipw2100_pm_qos_req
);
6619 module_init(ipw2100_init
);
6620 module_exit(ipw2100_exit
);
6622 static int ipw2100_wx_get_name(struct net_device
*dev
,
6623 struct iw_request_info
*info
,
6624 union iwreq_data
*wrqu
, char *extra
)
6627 * This can be called at any time. No action lock required
6630 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6631 if (!(priv
->status
& STATUS_ASSOCIATED
))
6632 strcpy(wrqu
->name
, "unassociated");
6634 snprintf(wrqu
->name
, IFNAMSIZ
, "IEEE 802.11b");
6636 IPW_DEBUG_WX("Name: %s\n", wrqu
->name
);
6640 static int ipw2100_wx_set_freq(struct net_device
*dev
,
6641 struct iw_request_info
*info
,
6642 union iwreq_data
*wrqu
, char *extra
)
6644 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6645 struct iw_freq
*fwrq
= &wrqu
->freq
;
6648 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
)
6651 mutex_lock(&priv
->action_mutex
);
6652 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6657 /* if setting by freq convert to channel */
6659 if ((fwrq
->m
>= (int)2.412e8
&& fwrq
->m
<= (int)2.487e8
)) {
6660 int f
= fwrq
->m
/ 100000;
6663 while ((c
< REG_MAX_CHANNEL
) &&
6664 (f
!= ipw2100_frequencies
[c
]))
6667 /* hack to fall through */
6673 if (fwrq
->e
> 0 || fwrq
->m
> 1000) {
6676 } else { /* Set the channel */
6677 IPW_DEBUG_WX("SET Freq/Channel -> %d\n", fwrq
->m
);
6678 err
= ipw2100_set_channel(priv
, fwrq
->m
, 0);
6682 mutex_unlock(&priv
->action_mutex
);
6686 static int ipw2100_wx_get_freq(struct net_device
*dev
,
6687 struct iw_request_info
*info
,
6688 union iwreq_data
*wrqu
, char *extra
)
6691 * This can be called at any time. No action lock required
6694 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6698 /* If we are associated, trying to associate, or have a statically
6699 * configured CHANNEL then return that; otherwise return ANY */
6700 if (priv
->config
& CFG_STATIC_CHANNEL
||
6701 priv
->status
& STATUS_ASSOCIATED
)
6702 wrqu
->freq
.m
= priv
->channel
;
6706 IPW_DEBUG_WX("GET Freq/Channel -> %d\n", priv
->channel
);
6711 static int ipw2100_wx_set_mode(struct net_device
*dev
,
6712 struct iw_request_info
*info
,
6713 union iwreq_data
*wrqu
, char *extra
)
6715 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6718 IPW_DEBUG_WX("SET Mode -> %d\n", wrqu
->mode
);
6720 if (wrqu
->mode
== priv
->ieee
->iw_mode
)
6723 mutex_lock(&priv
->action_mutex
);
6724 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6729 switch (wrqu
->mode
) {
6730 #ifdef CONFIG_IPW2100_MONITOR
6731 case IW_MODE_MONITOR
:
6732 err
= ipw2100_switch_mode(priv
, IW_MODE_MONITOR
);
6734 #endif /* CONFIG_IPW2100_MONITOR */
6736 err
= ipw2100_switch_mode(priv
, IW_MODE_ADHOC
);
6741 err
= ipw2100_switch_mode(priv
, IW_MODE_INFRA
);
6746 mutex_unlock(&priv
->action_mutex
);
6750 static int ipw2100_wx_get_mode(struct net_device
*dev
,
6751 struct iw_request_info
*info
,
6752 union iwreq_data
*wrqu
, char *extra
)
6755 * This can be called at any time. No action lock required
6758 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6760 wrqu
->mode
= priv
->ieee
->iw_mode
;
6761 IPW_DEBUG_WX("GET Mode -> %d\n", wrqu
->mode
);
6766 #define POWER_MODES 5
6768 /* Values are in microsecond */
6769 static const s32 timeout_duration
[POWER_MODES
] = {
6777 static const s32 period_duration
[POWER_MODES
] = {
6785 static int ipw2100_wx_get_range(struct net_device
*dev
,
6786 struct iw_request_info
*info
,
6787 union iwreq_data
*wrqu
, char *extra
)
6790 * This can be called at any time. No action lock required
6793 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6794 struct iw_range
*range
= (struct iw_range
*)extra
;
6798 wrqu
->data
.length
= sizeof(*range
);
6799 memset(range
, 0, sizeof(*range
));
6801 /* Let's try to keep this struct in the same order as in
6802 * linux/include/wireless.h
6805 /* TODO: See what values we can set, and remove the ones we can't
6806 * set, or fill them with some default data.
6809 /* ~5 Mb/s real (802.11b) */
6810 range
->throughput
= 5 * 1000 * 1000;
6812 // range->sensitivity; /* signal level threshold range */
6814 range
->max_qual
.qual
= 100;
6815 /* TODO: Find real max RSSI and stick here */
6816 range
->max_qual
.level
= 0;
6817 range
->max_qual
.noise
= 0;
6818 range
->max_qual
.updated
= 7; /* Updated all three */
6820 range
->avg_qual
.qual
= 70; /* > 8% missed beacons is 'bad' */
6821 /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
6822 range
->avg_qual
.level
= 20 + IPW2100_RSSI_TO_DBM
;
6823 range
->avg_qual
.noise
= 0;
6824 range
->avg_qual
.updated
= 7; /* Updated all three */
6826 range
->num_bitrates
= RATE_COUNT
;
6828 for (i
= 0; i
< RATE_COUNT
&& i
< IW_MAX_BITRATES
; i
++) {
6829 range
->bitrate
[i
] = ipw2100_bg_rates
[i
].bitrate
* 100 * 1000;
6832 range
->min_rts
= MIN_RTS_THRESHOLD
;
6833 range
->max_rts
= MAX_RTS_THRESHOLD
;
6834 range
->min_frag
= MIN_FRAG_THRESHOLD
;
6835 range
->max_frag
= MAX_FRAG_THRESHOLD
;
6837 range
->min_pmp
= period_duration
[0]; /* Minimal PM period */
6838 range
->max_pmp
= period_duration
[POWER_MODES
- 1]; /* Maximal PM period */
6839 range
->min_pmt
= timeout_duration
[POWER_MODES
- 1]; /* Minimal PM timeout */
6840 range
->max_pmt
= timeout_duration
[0]; /* Maximal PM timeout */
6842 /* How to decode max/min PM period */
6843 range
->pmp_flags
= IW_POWER_PERIOD
;
6844 /* How to decode max/min PM period */
6845 range
->pmt_flags
= IW_POWER_TIMEOUT
;
6846 /* What PM options are supported */
6847 range
->pm_capa
= IW_POWER_TIMEOUT
| IW_POWER_PERIOD
;
6849 range
->encoding_size
[0] = 5;
6850 range
->encoding_size
[1] = 13; /* Different token sizes */
6851 range
->num_encoding_sizes
= 2; /* Number of entry in the list */
6852 range
->max_encoding_tokens
= WEP_KEYS
; /* Max number of tokens */
6853 // range->encoding_login_index; /* token index for login token */
6855 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
6856 range
->txpower_capa
= IW_TXPOW_DBM
;
6857 range
->num_txpower
= IW_MAX_TXPOWER
;
6858 for (i
= 0, level
= (IPW_TX_POWER_MAX_DBM
* 16);
6861 ((IPW_TX_POWER_MAX_DBM
-
6862 IPW_TX_POWER_MIN_DBM
) * 16) / (IW_MAX_TXPOWER
- 1))
6863 range
->txpower
[i
] = level
/ 16;
6865 range
->txpower_capa
= 0;
6866 range
->num_txpower
= 0;
6869 /* Set the Wireless Extension versions */
6870 range
->we_version_compiled
= WIRELESS_EXT
;
6871 range
->we_version_source
= 18;
6873 // range->retry_capa; /* What retry options are supported */
6874 // range->retry_flags; /* How to decode max/min retry limit */
6875 // range->r_time_flags; /* How to decode max/min retry life */
6876 // range->min_retry; /* Minimal number of retries */
6877 // range->max_retry; /* Maximal number of retries */
6878 // range->min_r_time; /* Minimal retry lifetime */
6879 // range->max_r_time; /* Maximal retry lifetime */
6881 range
->num_channels
= FREQ_COUNT
;
6884 for (i
= 0; i
< FREQ_COUNT
; i
++) {
6885 // TODO: Include only legal frequencies for some countries
6886 // if (local->channel_mask & (1 << i)) {
6887 range
->freq
[val
].i
= i
+ 1;
6888 range
->freq
[val
].m
= ipw2100_frequencies
[i
] * 100000;
6889 range
->freq
[val
].e
= 1;
6892 if (val
== IW_MAX_FREQUENCIES
)
6895 range
->num_frequency
= val
;
6897 /* Event capability (kernel + driver) */
6898 range
->event_capa
[0] = (IW_EVENT_CAPA_K_0
|
6899 IW_EVENT_CAPA_MASK(SIOCGIWAP
));
6900 range
->event_capa
[1] = IW_EVENT_CAPA_K_1
;
6902 range
->enc_capa
= IW_ENC_CAPA_WPA
| IW_ENC_CAPA_WPA2
|
6903 IW_ENC_CAPA_CIPHER_TKIP
| IW_ENC_CAPA_CIPHER_CCMP
;
6905 IPW_DEBUG_WX("GET Range\n");
6910 static int ipw2100_wx_set_wap(struct net_device
*dev
,
6911 struct iw_request_info
*info
,
6912 union iwreq_data
*wrqu
, char *extra
)
6914 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6918 if (wrqu
->ap_addr
.sa_family
!= ARPHRD_ETHER
)
6921 mutex_lock(&priv
->action_mutex
);
6922 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6927 if (is_broadcast_ether_addr(wrqu
->ap_addr
.sa_data
) ||
6928 is_zero_ether_addr(wrqu
->ap_addr
.sa_data
)) {
6929 /* we disable mandatory BSSID association */
6930 IPW_DEBUG_WX("exit - disable mandatory BSSID\n");
6931 priv
->config
&= ~CFG_STATIC_BSSID
;
6932 err
= ipw2100_set_mandatory_bssid(priv
, NULL
, 0);
6936 priv
->config
|= CFG_STATIC_BSSID
;
6937 memcpy(priv
->mandatory_bssid_mac
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
);
6939 err
= ipw2100_set_mandatory_bssid(priv
, wrqu
->ap_addr
.sa_data
, 0);
6941 IPW_DEBUG_WX("SET BSSID -> %pM\n", wrqu
->ap_addr
.sa_data
);
6944 mutex_unlock(&priv
->action_mutex
);
6948 static int ipw2100_wx_get_wap(struct net_device
*dev
,
6949 struct iw_request_info
*info
,
6950 union iwreq_data
*wrqu
, char *extra
)
6953 * This can be called at any time. No action lock required
6956 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6958 /* If we are associated, trying to associate, or have a statically
6959 * configured BSSID then return that; otherwise return ANY */
6960 if (priv
->config
& CFG_STATIC_BSSID
|| priv
->status
& STATUS_ASSOCIATED
) {
6961 wrqu
->ap_addr
.sa_family
= ARPHRD_ETHER
;
6962 memcpy(wrqu
->ap_addr
.sa_data
, priv
->bssid
, ETH_ALEN
);
6964 memset(wrqu
->ap_addr
.sa_data
, 0, ETH_ALEN
);
6966 IPW_DEBUG_WX("Getting WAP BSSID: %pM\n", wrqu
->ap_addr
.sa_data
);
6970 static int ipw2100_wx_set_essid(struct net_device
*dev
,
6971 struct iw_request_info
*info
,
6972 union iwreq_data
*wrqu
, char *extra
)
6974 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6975 char *essid
= ""; /* ANY */
6978 DECLARE_SSID_BUF(ssid
);
6980 mutex_lock(&priv
->action_mutex
);
6981 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6986 if (wrqu
->essid
.flags
&& wrqu
->essid
.length
) {
6987 length
= wrqu
->essid
.length
;
6992 IPW_DEBUG_WX("Setting ESSID to ANY\n");
6993 priv
->config
&= ~CFG_STATIC_ESSID
;
6994 err
= ipw2100_set_essid(priv
, NULL
, 0, 0);
6998 length
= min(length
, IW_ESSID_MAX_SIZE
);
7000 priv
->config
|= CFG_STATIC_ESSID
;
7002 if (priv
->essid_len
== length
&& !memcmp(priv
->essid
, extra
, length
)) {
7003 IPW_DEBUG_WX("ESSID set to current ESSID.\n");
7008 IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n",
7009 print_ssid(ssid
, essid
, length
), length
);
7011 priv
->essid_len
= length
;
7012 memcpy(priv
->essid
, essid
, priv
->essid_len
);
7014 err
= ipw2100_set_essid(priv
, essid
, length
, 0);
7017 mutex_unlock(&priv
->action_mutex
);
7021 static int ipw2100_wx_get_essid(struct net_device
*dev
,
7022 struct iw_request_info
*info
,
7023 union iwreq_data
*wrqu
, char *extra
)
7026 * This can be called at any time. No action lock required
7029 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7030 DECLARE_SSID_BUF(ssid
);
7032 /* If we are associated, trying to associate, or have a statically
7033 * configured ESSID then return that; otherwise return ANY */
7034 if (priv
->config
& CFG_STATIC_ESSID
|| priv
->status
& STATUS_ASSOCIATED
) {
7035 IPW_DEBUG_WX("Getting essid: '%s'\n",
7036 print_ssid(ssid
, priv
->essid
, priv
->essid_len
));
7037 memcpy(extra
, priv
->essid
, priv
->essid_len
);
7038 wrqu
->essid
.length
= priv
->essid_len
;
7039 wrqu
->essid
.flags
= 1; /* active */
7041 IPW_DEBUG_WX("Getting essid: ANY\n");
7042 wrqu
->essid
.length
= 0;
7043 wrqu
->essid
.flags
= 0; /* active */
7049 static int ipw2100_wx_set_nick(struct net_device
*dev
,
7050 struct iw_request_info
*info
,
7051 union iwreq_data
*wrqu
, char *extra
)
7054 * This can be called at any time. No action lock required
7057 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7059 if (wrqu
->data
.length
> IW_ESSID_MAX_SIZE
)
7062 wrqu
->data
.length
= min_t(size_t, wrqu
->data
.length
, sizeof(priv
->nick
));
7063 memset(priv
->nick
, 0, sizeof(priv
->nick
));
7064 memcpy(priv
->nick
, extra
, wrqu
->data
.length
);
7066 IPW_DEBUG_WX("SET Nickname -> %s\n", priv
->nick
);
7071 static int ipw2100_wx_get_nick(struct net_device
*dev
,
7072 struct iw_request_info
*info
,
7073 union iwreq_data
*wrqu
, char *extra
)
7076 * This can be called at any time. No action lock required
7079 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7081 wrqu
->data
.length
= strlen(priv
->nick
);
7082 memcpy(extra
, priv
->nick
, wrqu
->data
.length
);
7083 wrqu
->data
.flags
= 1; /* active */
7085 IPW_DEBUG_WX("GET Nickname -> %s\n", extra
);
7090 static int ipw2100_wx_set_rate(struct net_device
*dev
,
7091 struct iw_request_info
*info
,
7092 union iwreq_data
*wrqu
, char *extra
)
7094 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7095 u32 target_rate
= wrqu
->bitrate
.value
;
7099 mutex_lock(&priv
->action_mutex
);
7100 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7107 if (target_rate
== 1000000 ||
7108 (!wrqu
->bitrate
.fixed
&& target_rate
> 1000000))
7109 rate
|= TX_RATE_1_MBIT
;
7110 if (target_rate
== 2000000 ||
7111 (!wrqu
->bitrate
.fixed
&& target_rate
> 2000000))
7112 rate
|= TX_RATE_2_MBIT
;
7113 if (target_rate
== 5500000 ||
7114 (!wrqu
->bitrate
.fixed
&& target_rate
> 5500000))
7115 rate
|= TX_RATE_5_5_MBIT
;
7116 if (target_rate
== 11000000 ||
7117 (!wrqu
->bitrate
.fixed
&& target_rate
> 11000000))
7118 rate
|= TX_RATE_11_MBIT
;
7120 rate
= DEFAULT_TX_RATES
;
7122 err
= ipw2100_set_tx_rates(priv
, rate
, 0);
7124 IPW_DEBUG_WX("SET Rate -> %04X\n", rate
);
7126 mutex_unlock(&priv
->action_mutex
);
7130 static int ipw2100_wx_get_rate(struct net_device
*dev
,
7131 struct iw_request_info
*info
,
7132 union iwreq_data
*wrqu
, char *extra
)
7134 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7136 unsigned int len
= sizeof(val
);
7139 if (!(priv
->status
& STATUS_ENABLED
) ||
7140 priv
->status
& STATUS_RF_KILL_MASK
||
7141 !(priv
->status
& STATUS_ASSOCIATED
)) {
7142 wrqu
->bitrate
.value
= 0;
7146 mutex_lock(&priv
->action_mutex
);
7147 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7152 err
= ipw2100_get_ordinal(priv
, IPW_ORD_CURRENT_TX_RATE
, &val
, &len
);
7154 IPW_DEBUG_WX("failed querying ordinals.\n");
7158 switch (val
& TX_RATE_MASK
) {
7159 case TX_RATE_1_MBIT
:
7160 wrqu
->bitrate
.value
= 1000000;
7162 case TX_RATE_2_MBIT
:
7163 wrqu
->bitrate
.value
= 2000000;
7165 case TX_RATE_5_5_MBIT
:
7166 wrqu
->bitrate
.value
= 5500000;
7168 case TX_RATE_11_MBIT
:
7169 wrqu
->bitrate
.value
= 11000000;
7172 wrqu
->bitrate
.value
= 0;
7175 IPW_DEBUG_WX("GET Rate -> %d\n", wrqu
->bitrate
.value
);
7178 mutex_unlock(&priv
->action_mutex
);
7182 static int ipw2100_wx_set_rts(struct net_device
*dev
,
7183 struct iw_request_info
*info
,
7184 union iwreq_data
*wrqu
, char *extra
)
7186 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7189 /* Auto RTS not yet supported */
7190 if (wrqu
->rts
.fixed
== 0)
7193 mutex_lock(&priv
->action_mutex
);
7194 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7199 if (wrqu
->rts
.disabled
)
7200 value
= priv
->rts_threshold
| RTS_DISABLED
;
7202 if (wrqu
->rts
.value
< 1 || wrqu
->rts
.value
> 2304) {
7206 value
= wrqu
->rts
.value
;
7209 err
= ipw2100_set_rts_threshold(priv
, value
);
7211 IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X\n", value
);
7213 mutex_unlock(&priv
->action_mutex
);
7217 static int ipw2100_wx_get_rts(struct net_device
*dev
,
7218 struct iw_request_info
*info
,
7219 union iwreq_data
*wrqu
, char *extra
)
7222 * This can be called at any time. No action lock required
7225 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7227 wrqu
->rts
.value
= priv
->rts_threshold
& ~RTS_DISABLED
;
7228 wrqu
->rts
.fixed
= 1; /* no auto select */
7230 /* If RTS is set to the default value, then it is disabled */
7231 wrqu
->rts
.disabled
= (priv
->rts_threshold
& RTS_DISABLED
) ? 1 : 0;
7233 IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X\n", wrqu
->rts
.value
);
7238 static int ipw2100_wx_set_txpow(struct net_device
*dev
,
7239 struct iw_request_info
*info
,
7240 union iwreq_data
*wrqu
, char *extra
)
7242 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7245 if (ipw_radio_kill_sw(priv
, wrqu
->txpower
.disabled
))
7246 return -EINPROGRESS
;
7248 if (priv
->ieee
->iw_mode
!= IW_MODE_ADHOC
)
7251 if ((wrqu
->txpower
.flags
& IW_TXPOW_TYPE
) != IW_TXPOW_DBM
)
7254 if (wrqu
->txpower
.fixed
== 0)
7255 value
= IPW_TX_POWER_DEFAULT
;
7257 if (wrqu
->txpower
.value
< IPW_TX_POWER_MIN_DBM
||
7258 wrqu
->txpower
.value
> IPW_TX_POWER_MAX_DBM
)
7261 value
= wrqu
->txpower
.value
;
7264 mutex_lock(&priv
->action_mutex
);
7265 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7270 err
= ipw2100_set_tx_power(priv
, value
);
7272 IPW_DEBUG_WX("SET TX Power -> %d\n", value
);
7275 mutex_unlock(&priv
->action_mutex
);
7279 static int ipw2100_wx_get_txpow(struct net_device
*dev
,
7280 struct iw_request_info
*info
,
7281 union iwreq_data
*wrqu
, char *extra
)
7284 * This can be called at any time. No action lock required
7287 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7289 wrqu
->txpower
.disabled
= (priv
->status
& STATUS_RF_KILL_MASK
) ? 1 : 0;
7291 if (priv
->tx_power
== IPW_TX_POWER_DEFAULT
) {
7292 wrqu
->txpower
.fixed
= 0;
7293 wrqu
->txpower
.value
= IPW_TX_POWER_MAX_DBM
;
7295 wrqu
->txpower
.fixed
= 1;
7296 wrqu
->txpower
.value
= priv
->tx_power
;
7299 wrqu
->txpower
.flags
= IW_TXPOW_DBM
;
7301 IPW_DEBUG_WX("GET TX Power -> %d\n", wrqu
->txpower
.value
);
7306 static int ipw2100_wx_set_frag(struct net_device
*dev
,
7307 struct iw_request_info
*info
,
7308 union iwreq_data
*wrqu
, char *extra
)
7311 * This can be called at any time. No action lock required
7314 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7316 if (!wrqu
->frag
.fixed
)
7319 if (wrqu
->frag
.disabled
) {
7320 priv
->frag_threshold
|= FRAG_DISABLED
;
7321 priv
->ieee
->fts
= DEFAULT_FTS
;
7323 if (wrqu
->frag
.value
< MIN_FRAG_THRESHOLD
||
7324 wrqu
->frag
.value
> MAX_FRAG_THRESHOLD
)
7327 priv
->ieee
->fts
= wrqu
->frag
.value
& ~0x1;
7328 priv
->frag_threshold
= priv
->ieee
->fts
;
7331 IPW_DEBUG_WX("SET Frag Threshold -> %d\n", priv
->ieee
->fts
);
7336 static int ipw2100_wx_get_frag(struct net_device
*dev
,
7337 struct iw_request_info
*info
,
7338 union iwreq_data
*wrqu
, char *extra
)
7341 * This can be called at any time. No action lock required
7344 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7345 wrqu
->frag
.value
= priv
->frag_threshold
& ~FRAG_DISABLED
;
7346 wrqu
->frag
.fixed
= 0; /* no auto select */
7347 wrqu
->frag
.disabled
= (priv
->frag_threshold
& FRAG_DISABLED
) ? 1 : 0;
7349 IPW_DEBUG_WX("GET Frag Threshold -> %d\n", wrqu
->frag
.value
);
7354 static int ipw2100_wx_set_retry(struct net_device
*dev
,
7355 struct iw_request_info
*info
,
7356 union iwreq_data
*wrqu
, char *extra
)
7358 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7361 if (wrqu
->retry
.flags
& IW_RETRY_LIFETIME
|| wrqu
->retry
.disabled
)
7364 if (!(wrqu
->retry
.flags
& IW_RETRY_LIMIT
))
7367 mutex_lock(&priv
->action_mutex
);
7368 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7373 if (wrqu
->retry
.flags
& IW_RETRY_SHORT
) {
7374 err
= ipw2100_set_short_retry(priv
, wrqu
->retry
.value
);
7375 IPW_DEBUG_WX("SET Short Retry Limit -> %d\n",
7380 if (wrqu
->retry
.flags
& IW_RETRY_LONG
) {
7381 err
= ipw2100_set_long_retry(priv
, wrqu
->retry
.value
);
7382 IPW_DEBUG_WX("SET Long Retry Limit -> %d\n",
7387 err
= ipw2100_set_short_retry(priv
, wrqu
->retry
.value
);
7389 err
= ipw2100_set_long_retry(priv
, wrqu
->retry
.value
);
7391 IPW_DEBUG_WX("SET Both Retry Limits -> %d\n", wrqu
->retry
.value
);
7394 mutex_unlock(&priv
->action_mutex
);
7398 static int ipw2100_wx_get_retry(struct net_device
*dev
,
7399 struct iw_request_info
*info
,
7400 union iwreq_data
*wrqu
, char *extra
)
7403 * This can be called at any time. No action lock required
7406 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7408 wrqu
->retry
.disabled
= 0; /* can't be disabled */
7410 if ((wrqu
->retry
.flags
& IW_RETRY_TYPE
) == IW_RETRY_LIFETIME
)
7413 if (wrqu
->retry
.flags
& IW_RETRY_LONG
) {
7414 wrqu
->retry
.flags
= IW_RETRY_LIMIT
| IW_RETRY_LONG
;
7415 wrqu
->retry
.value
= priv
->long_retry_limit
;
7418 (priv
->short_retry_limit
!=
7419 priv
->long_retry_limit
) ?
7420 IW_RETRY_LIMIT
| IW_RETRY_SHORT
: IW_RETRY_LIMIT
;
7422 wrqu
->retry
.value
= priv
->short_retry_limit
;
7425 IPW_DEBUG_WX("GET Retry -> %d\n", wrqu
->retry
.value
);
7430 static int ipw2100_wx_set_scan(struct net_device
*dev
,
7431 struct iw_request_info
*info
,
7432 union iwreq_data
*wrqu
, char *extra
)
7434 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7437 mutex_lock(&priv
->action_mutex
);
7438 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7443 IPW_DEBUG_WX("Initiating scan...\n");
7445 priv
->user_requested_scan
= 1;
7446 if (ipw2100_set_scan_options(priv
) || ipw2100_start_scan(priv
)) {
7447 IPW_DEBUG_WX("Start scan failed.\n");
7449 /* TODO: Mark a scan as pending so when hardware initialized
7454 mutex_unlock(&priv
->action_mutex
);
7458 static int ipw2100_wx_get_scan(struct net_device
*dev
,
7459 struct iw_request_info
*info
,
7460 union iwreq_data
*wrqu
, char *extra
)
7463 * This can be called at any time. No action lock required
7466 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7467 return libipw_wx_get_scan(priv
->ieee
, info
, wrqu
, extra
);
7471 * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c
7473 static int ipw2100_wx_set_encode(struct net_device
*dev
,
7474 struct iw_request_info
*info
,
7475 union iwreq_data
*wrqu
, char *key
)
7478 * No check of STATUS_INITIALIZED required
7481 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7482 return libipw_wx_set_encode(priv
->ieee
, info
, wrqu
, key
);
7485 static int ipw2100_wx_get_encode(struct net_device
*dev
,
7486 struct iw_request_info
*info
,
7487 union iwreq_data
*wrqu
, char *key
)
7490 * This can be called at any time. No action lock required
7493 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7494 return libipw_wx_get_encode(priv
->ieee
, info
, wrqu
, key
);
7497 static int ipw2100_wx_set_power(struct net_device
*dev
,
7498 struct iw_request_info
*info
,
7499 union iwreq_data
*wrqu
, char *extra
)
7501 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7504 mutex_lock(&priv
->action_mutex
);
7505 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7510 if (wrqu
->power
.disabled
) {
7511 priv
->power_mode
= IPW_POWER_LEVEL(priv
->power_mode
);
7512 err
= ipw2100_set_power_mode(priv
, IPW_POWER_MODE_CAM
);
7513 IPW_DEBUG_WX("SET Power Management Mode -> off\n");
7517 switch (wrqu
->power
.flags
& IW_POWER_MODE
) {
7518 case IW_POWER_ON
: /* If not specified */
7519 case IW_POWER_MODE
: /* If set all mask */
7520 case IW_POWER_ALL_R
: /* If explicitly state all */
7522 default: /* Otherwise we don't support it */
7523 IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
7529 /* If the user hasn't specified a power management mode yet, default
7531 priv
->power_mode
= IPW_POWER_ENABLED
| priv
->power_mode
;
7532 err
= ipw2100_set_power_mode(priv
, IPW_POWER_LEVEL(priv
->power_mode
));
7534 IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", priv
->power_mode
);
7537 mutex_unlock(&priv
->action_mutex
);
7542 static int ipw2100_wx_get_power(struct net_device
*dev
,
7543 struct iw_request_info
*info
,
7544 union iwreq_data
*wrqu
, char *extra
)
7547 * This can be called at any time. No action lock required
7550 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7552 if (!(priv
->power_mode
& IPW_POWER_ENABLED
))
7553 wrqu
->power
.disabled
= 1;
7555 wrqu
->power
.disabled
= 0;
7556 wrqu
->power
.flags
= 0;
7559 IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv
->power_mode
);
7569 static int ipw2100_wx_set_genie(struct net_device
*dev
,
7570 struct iw_request_info
*info
,
7571 union iwreq_data
*wrqu
, char *extra
)
7574 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7575 struct libipw_device
*ieee
= priv
->ieee
;
7578 if (!ieee
->wpa_enabled
)
7581 if (wrqu
->data
.length
> MAX_WPA_IE_LEN
||
7582 (wrqu
->data
.length
&& extra
== NULL
))
7585 if (wrqu
->data
.length
) {
7586 buf
= kmemdup(extra
, wrqu
->data
.length
, GFP_KERNEL
);
7590 kfree(ieee
->wpa_ie
);
7592 ieee
->wpa_ie_len
= wrqu
->data
.length
;
7594 kfree(ieee
->wpa_ie
);
7595 ieee
->wpa_ie
= NULL
;
7596 ieee
->wpa_ie_len
= 0;
7599 ipw2100_wpa_assoc_frame(priv
, ieee
->wpa_ie
, ieee
->wpa_ie_len
);
7605 static int ipw2100_wx_get_genie(struct net_device
*dev
,
7606 struct iw_request_info
*info
,
7607 union iwreq_data
*wrqu
, char *extra
)
7609 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7610 struct libipw_device
*ieee
= priv
->ieee
;
7612 if (ieee
->wpa_ie_len
== 0 || ieee
->wpa_ie
== NULL
) {
7613 wrqu
->data
.length
= 0;
7617 if (wrqu
->data
.length
< ieee
->wpa_ie_len
)
7620 wrqu
->data
.length
= ieee
->wpa_ie_len
;
7621 memcpy(extra
, ieee
->wpa_ie
, ieee
->wpa_ie_len
);
7627 static int ipw2100_wx_set_auth(struct net_device
*dev
,
7628 struct iw_request_info
*info
,
7629 union iwreq_data
*wrqu
, char *extra
)
7631 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7632 struct libipw_device
*ieee
= priv
->ieee
;
7633 struct iw_param
*param
= &wrqu
->param
;
7634 struct lib80211_crypt_data
*crypt
;
7635 unsigned long flags
;
7638 switch (param
->flags
& IW_AUTH_INDEX
) {
7639 case IW_AUTH_WPA_VERSION
:
7640 case IW_AUTH_CIPHER_PAIRWISE
:
7641 case IW_AUTH_CIPHER_GROUP
:
7642 case IW_AUTH_KEY_MGMT
:
7644 * ipw2200 does not use these parameters
7648 case IW_AUTH_TKIP_COUNTERMEASURES
:
7649 crypt
= priv
->ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
];
7650 if (!crypt
|| !crypt
->ops
->set_flags
|| !crypt
->ops
->get_flags
)
7653 flags
= crypt
->ops
->get_flags(crypt
->priv
);
7656 flags
|= IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
;
7658 flags
&= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
;
7660 crypt
->ops
->set_flags(flags
, crypt
->priv
);
7664 case IW_AUTH_DROP_UNENCRYPTED
:{
7667 * wpa_supplicant calls set_wpa_enabled when the driver
7668 * is loaded and unloaded, regardless of if WPA is being
7669 * used. No other calls are made which can be used to
7670 * determine if encryption will be used or not prior to
7671 * association being expected. If encryption is not being
7672 * used, drop_unencrypted is set to false, else true -- we
7673 * can use this to determine if the CAP_PRIVACY_ON bit should
7676 struct libipw_security sec
= {
7677 .flags
= SEC_ENABLED
,
7678 .enabled
= param
->value
,
7680 priv
->ieee
->drop_unencrypted
= param
->value
;
7681 /* We only change SEC_LEVEL for open mode. Others
7682 * are set by ipw_wpa_set_encryption.
7684 if (!param
->value
) {
7685 sec
.flags
|= SEC_LEVEL
;
7686 sec
.level
= SEC_LEVEL_0
;
7688 sec
.flags
|= SEC_LEVEL
;
7689 sec
.level
= SEC_LEVEL_1
;
7691 if (priv
->ieee
->set_security
)
7692 priv
->ieee
->set_security(priv
->ieee
->dev
, &sec
);
7696 case IW_AUTH_80211_AUTH_ALG
:
7697 ret
= ipw2100_wpa_set_auth_algs(priv
, param
->value
);
7700 case IW_AUTH_WPA_ENABLED
:
7701 ret
= ipw2100_wpa_enable(priv
, param
->value
);
7704 case IW_AUTH_RX_UNENCRYPTED_EAPOL
:
7705 ieee
->ieee802_1x
= param
->value
;
7708 //case IW_AUTH_ROAMING_CONTROL:
7709 case IW_AUTH_PRIVACY_INVOKED
:
7710 ieee
->privacy_invoked
= param
->value
;
7720 static int ipw2100_wx_get_auth(struct net_device
*dev
,
7721 struct iw_request_info
*info
,
7722 union iwreq_data
*wrqu
, char *extra
)
7724 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7725 struct libipw_device
*ieee
= priv
->ieee
;
7726 struct lib80211_crypt_data
*crypt
;
7727 struct iw_param
*param
= &wrqu
->param
;
7730 switch (param
->flags
& IW_AUTH_INDEX
) {
7731 case IW_AUTH_WPA_VERSION
:
7732 case IW_AUTH_CIPHER_PAIRWISE
:
7733 case IW_AUTH_CIPHER_GROUP
:
7734 case IW_AUTH_KEY_MGMT
:
7736 * wpa_supplicant will control these internally
7741 case IW_AUTH_TKIP_COUNTERMEASURES
:
7742 crypt
= priv
->ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
];
7743 if (!crypt
|| !crypt
->ops
->get_flags
) {
7744 IPW_DEBUG_WARNING("Can't get TKIP countermeasures: "
7745 "crypt not set!\n");
7749 param
->value
= (crypt
->ops
->get_flags(crypt
->priv
) &
7750 IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
) ? 1 : 0;
7754 case IW_AUTH_DROP_UNENCRYPTED
:
7755 param
->value
= ieee
->drop_unencrypted
;
7758 case IW_AUTH_80211_AUTH_ALG
:
7759 param
->value
= priv
->ieee
->sec
.auth_mode
;
7762 case IW_AUTH_WPA_ENABLED
:
7763 param
->value
= ieee
->wpa_enabled
;
7766 case IW_AUTH_RX_UNENCRYPTED_EAPOL
:
7767 param
->value
= ieee
->ieee802_1x
;
7770 case IW_AUTH_ROAMING_CONTROL
:
7771 case IW_AUTH_PRIVACY_INVOKED
:
7772 param
->value
= ieee
->privacy_invoked
;
7781 /* SIOCSIWENCODEEXT */
7782 static int ipw2100_wx_set_encodeext(struct net_device
*dev
,
7783 struct iw_request_info
*info
,
7784 union iwreq_data
*wrqu
, char *extra
)
7786 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7787 return libipw_wx_set_encodeext(priv
->ieee
, info
, wrqu
, extra
);
7790 /* SIOCGIWENCODEEXT */
7791 static int ipw2100_wx_get_encodeext(struct net_device
*dev
,
7792 struct iw_request_info
*info
,
7793 union iwreq_data
*wrqu
, char *extra
)
7795 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7796 return libipw_wx_get_encodeext(priv
->ieee
, info
, wrqu
, extra
);
7800 static int ipw2100_wx_set_mlme(struct net_device
*dev
,
7801 struct iw_request_info
*info
,
7802 union iwreq_data
*wrqu
, char *extra
)
7804 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7805 struct iw_mlme
*mlme
= (struct iw_mlme
*)extra
;
7808 reason
= cpu_to_le16(mlme
->reason_code
);
7810 switch (mlme
->cmd
) {
7811 case IW_MLME_DEAUTH
:
7815 case IW_MLME_DISASSOC
:
7816 ipw2100_disassociate_bssid(priv
);
7830 #ifdef CONFIG_IPW2100_MONITOR
7831 static int ipw2100_wx_set_promisc(struct net_device
*dev
,
7832 struct iw_request_info
*info
,
7833 union iwreq_data
*wrqu
, char *extra
)
7835 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7836 int *parms
= (int *)extra
;
7837 int enable
= (parms
[0] > 0);
7840 mutex_lock(&priv
->action_mutex
);
7841 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7847 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
7848 err
= ipw2100_set_channel(priv
, parms
[1], 0);
7851 priv
->channel
= parms
[1];
7852 err
= ipw2100_switch_mode(priv
, IW_MODE_MONITOR
);
7854 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
7855 err
= ipw2100_switch_mode(priv
, priv
->last_mode
);
7858 mutex_unlock(&priv
->action_mutex
);
7862 static int ipw2100_wx_reset(struct net_device
*dev
,
7863 struct iw_request_info
*info
,
7864 union iwreq_data
*wrqu
, char *extra
)
7866 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7867 if (priv
->status
& STATUS_INITIALIZED
)
7868 schedule_reset(priv
);
7874 static int ipw2100_wx_set_powermode(struct net_device
*dev
,
7875 struct iw_request_info
*info
,
7876 union iwreq_data
*wrqu
, char *extra
)
7878 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7879 int err
= 0, mode
= *(int *)extra
;
7881 mutex_lock(&priv
->action_mutex
);
7882 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7887 if ((mode
< 0) || (mode
> POWER_MODES
))
7888 mode
= IPW_POWER_AUTO
;
7890 if (IPW_POWER_LEVEL(priv
->power_mode
) != mode
)
7891 err
= ipw2100_set_power_mode(priv
, mode
);
7893 mutex_unlock(&priv
->action_mutex
);
7897 #define MAX_POWER_STRING 80
7898 static int ipw2100_wx_get_powermode(struct net_device
*dev
,
7899 struct iw_request_info
*info
,
7900 union iwreq_data
*wrqu
, char *extra
)
7903 * This can be called at any time. No action lock required
7906 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7907 int level
= IPW_POWER_LEVEL(priv
->power_mode
);
7908 s32 timeout
, period
;
7910 if (!(priv
->power_mode
& IPW_POWER_ENABLED
)) {
7911 snprintf(extra
, MAX_POWER_STRING
,
7912 "Power save level: %d (Off)", level
);
7915 case IPW_POWER_MODE_CAM
:
7916 snprintf(extra
, MAX_POWER_STRING
,
7917 "Power save level: %d (None)", level
);
7919 case IPW_POWER_AUTO
:
7920 snprintf(extra
, MAX_POWER_STRING
,
7921 "Power save level: %d (Auto)", level
);
7924 timeout
= timeout_duration
[level
- 1] / 1000;
7925 period
= period_duration
[level
- 1] / 1000;
7926 snprintf(extra
, MAX_POWER_STRING
,
7927 "Power save level: %d "
7928 "(Timeout %dms, Period %dms)",
7929 level
, timeout
, period
);
7933 wrqu
->data
.length
= strlen(extra
) + 1;
7938 static int ipw2100_wx_set_preamble(struct net_device
*dev
,
7939 struct iw_request_info
*info
,
7940 union iwreq_data
*wrqu
, char *extra
)
7942 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7943 int err
, mode
= *(int *)extra
;
7945 mutex_lock(&priv
->action_mutex
);
7946 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7952 priv
->config
|= CFG_LONG_PREAMBLE
;
7954 priv
->config
&= ~CFG_LONG_PREAMBLE
;
7960 err
= ipw2100_system_config(priv
, 0);
7963 mutex_unlock(&priv
->action_mutex
);
7967 static int ipw2100_wx_get_preamble(struct net_device
*dev
,
7968 struct iw_request_info
*info
,
7969 union iwreq_data
*wrqu
, char *extra
)
7972 * This can be called at any time. No action lock required
7975 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7977 if (priv
->config
& CFG_LONG_PREAMBLE
)
7978 snprintf(wrqu
->name
, IFNAMSIZ
, "long (1)");
7980 snprintf(wrqu
->name
, IFNAMSIZ
, "auto (0)");
7985 #ifdef CONFIG_IPW2100_MONITOR
7986 static int ipw2100_wx_set_crc_check(struct net_device
*dev
,
7987 struct iw_request_info
*info
,
7988 union iwreq_data
*wrqu
, char *extra
)
7990 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7991 int err
, mode
= *(int *)extra
;
7993 mutex_lock(&priv
->action_mutex
);
7994 if (!(priv
->status
& STATUS_INITIALIZED
)) {
8000 priv
->config
|= CFG_CRC_CHECK
;
8002 priv
->config
&= ~CFG_CRC_CHECK
;
8010 mutex_unlock(&priv
->action_mutex
);
8014 static int ipw2100_wx_get_crc_check(struct net_device
*dev
,
8015 struct iw_request_info
*info
,
8016 union iwreq_data
*wrqu
, char *extra
)
8019 * This can be called at any time. No action lock required
8022 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8024 if (priv
->config
& CFG_CRC_CHECK
)
8025 snprintf(wrqu
->name
, IFNAMSIZ
, "CRC checked (1)");
8027 snprintf(wrqu
->name
, IFNAMSIZ
, "CRC ignored (0)");
8031 #endif /* CONFIG_IPW2100_MONITOR */
8033 static iw_handler ipw2100_wx_handlers
[] = {
8034 IW_HANDLER(SIOCGIWNAME
, ipw2100_wx_get_name
),
8035 IW_HANDLER(SIOCSIWFREQ
, ipw2100_wx_set_freq
),
8036 IW_HANDLER(SIOCGIWFREQ
, ipw2100_wx_get_freq
),
8037 IW_HANDLER(SIOCSIWMODE
, ipw2100_wx_set_mode
),
8038 IW_HANDLER(SIOCGIWMODE
, ipw2100_wx_get_mode
),
8039 IW_HANDLER(SIOCGIWRANGE
, ipw2100_wx_get_range
),
8040 IW_HANDLER(SIOCSIWAP
, ipw2100_wx_set_wap
),
8041 IW_HANDLER(SIOCGIWAP
, ipw2100_wx_get_wap
),
8042 IW_HANDLER(SIOCSIWMLME
, ipw2100_wx_set_mlme
),
8043 IW_HANDLER(SIOCSIWSCAN
, ipw2100_wx_set_scan
),
8044 IW_HANDLER(SIOCGIWSCAN
, ipw2100_wx_get_scan
),
8045 IW_HANDLER(SIOCSIWESSID
, ipw2100_wx_set_essid
),
8046 IW_HANDLER(SIOCGIWESSID
, ipw2100_wx_get_essid
),
8047 IW_HANDLER(SIOCSIWNICKN
, ipw2100_wx_set_nick
),
8048 IW_HANDLER(SIOCGIWNICKN
, ipw2100_wx_get_nick
),
8049 IW_HANDLER(SIOCSIWRATE
, ipw2100_wx_set_rate
),
8050 IW_HANDLER(SIOCGIWRATE
, ipw2100_wx_get_rate
),
8051 IW_HANDLER(SIOCSIWRTS
, ipw2100_wx_set_rts
),
8052 IW_HANDLER(SIOCGIWRTS
, ipw2100_wx_get_rts
),
8053 IW_HANDLER(SIOCSIWFRAG
, ipw2100_wx_set_frag
),
8054 IW_HANDLER(SIOCGIWFRAG
, ipw2100_wx_get_frag
),
8055 IW_HANDLER(SIOCSIWTXPOW
, ipw2100_wx_set_txpow
),
8056 IW_HANDLER(SIOCGIWTXPOW
, ipw2100_wx_get_txpow
),
8057 IW_HANDLER(SIOCSIWRETRY
, ipw2100_wx_set_retry
),
8058 IW_HANDLER(SIOCGIWRETRY
, ipw2100_wx_get_retry
),
8059 IW_HANDLER(SIOCSIWENCODE
, ipw2100_wx_set_encode
),
8060 IW_HANDLER(SIOCGIWENCODE
, ipw2100_wx_get_encode
),
8061 IW_HANDLER(SIOCSIWPOWER
, ipw2100_wx_set_power
),
8062 IW_HANDLER(SIOCGIWPOWER
, ipw2100_wx_get_power
),
8063 IW_HANDLER(SIOCSIWGENIE
, ipw2100_wx_set_genie
),
8064 IW_HANDLER(SIOCGIWGENIE
, ipw2100_wx_get_genie
),
8065 IW_HANDLER(SIOCSIWAUTH
, ipw2100_wx_set_auth
),
8066 IW_HANDLER(SIOCGIWAUTH
, ipw2100_wx_get_auth
),
8067 IW_HANDLER(SIOCSIWENCODEEXT
, ipw2100_wx_set_encodeext
),
8068 IW_HANDLER(SIOCGIWENCODEEXT
, ipw2100_wx_get_encodeext
),
8071 #define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV
8072 #define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1
8073 #define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2
8074 #define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3
8075 #define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4
8076 #define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5
8077 #define IPW2100_PRIV_SET_CRC_CHECK SIOCIWFIRSTPRIV+6
8078 #define IPW2100_PRIV_GET_CRC_CHECK SIOCIWFIRSTPRIV+7
8080 static const struct iw_priv_args ipw2100_private_args
[] = {
8082 #ifdef CONFIG_IPW2100_MONITOR
8084 IPW2100_PRIV_SET_MONITOR
,
8085 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 2, 0, "monitor"},
8088 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 0, 0, "reset"},
8089 #endif /* CONFIG_IPW2100_MONITOR */
8092 IPW2100_PRIV_SET_POWER
,
8093 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_power"},
8095 IPW2100_PRIV_GET_POWER
,
8096 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| MAX_POWER_STRING
,
8099 IPW2100_PRIV_SET_LONGPREAMBLE
,
8100 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_preamble"},
8102 IPW2100_PRIV_GET_LONGPREAMBLE
,
8103 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| IFNAMSIZ
, "get_preamble"},
8104 #ifdef CONFIG_IPW2100_MONITOR
8106 IPW2100_PRIV_SET_CRC_CHECK
,
8107 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_crc_check"},
8109 IPW2100_PRIV_GET_CRC_CHECK
,
8110 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| IFNAMSIZ
, "get_crc_check"},
8111 #endif /* CONFIG_IPW2100_MONITOR */
8114 static iw_handler ipw2100_private_handler
[] = {
8115 #ifdef CONFIG_IPW2100_MONITOR
8116 ipw2100_wx_set_promisc
,
8118 #else /* CONFIG_IPW2100_MONITOR */
8121 #endif /* CONFIG_IPW2100_MONITOR */
8122 ipw2100_wx_set_powermode
,
8123 ipw2100_wx_get_powermode
,
8124 ipw2100_wx_set_preamble
,
8125 ipw2100_wx_get_preamble
,
8126 #ifdef CONFIG_IPW2100_MONITOR
8127 ipw2100_wx_set_crc_check
,
8128 ipw2100_wx_get_crc_check
,
8129 #else /* CONFIG_IPW2100_MONITOR */
8132 #endif /* CONFIG_IPW2100_MONITOR */
8136 * Get wireless statistics.
8137 * Called by /proc/net/wireless
8138 * Also called by SIOCGIWSTATS
8140 static struct iw_statistics
*ipw2100_wx_wireless_stats(struct net_device
*dev
)
8155 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8156 struct iw_statistics
*wstats
;
8157 u32 rssi
, tx_retries
, missed_beacons
, tx_failures
;
8158 u32 ord_len
= sizeof(u32
);
8161 return (struct iw_statistics
*)NULL
;
8163 wstats
= &priv
->wstats
;
8165 /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
8166 * ipw2100_wx_wireless_stats seems to be called before fw is
8167 * initialized. STATUS_ASSOCIATED will only be set if the hw is up
8168 * and associated; if not associcated, the values are all meaningless
8169 * anyway, so set them all to NULL and INVALID */
8170 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8171 wstats
->miss
.beacon
= 0;
8172 wstats
->discard
.retries
= 0;
8173 wstats
->qual
.qual
= 0;
8174 wstats
->qual
.level
= 0;
8175 wstats
->qual
.noise
= 0;
8176 wstats
->qual
.updated
= 7;
8177 wstats
->qual
.updated
|= IW_QUAL_NOISE_INVALID
|
8178 IW_QUAL_QUAL_INVALID
| IW_QUAL_LEVEL_INVALID
;
8182 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_PERCENT_MISSED_BCNS
,
8183 &missed_beacons
, &ord_len
))
8184 goto fail_get_ordinal
;
8186 /* If we don't have a connection the quality and level is 0 */
8187 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8188 wstats
->qual
.qual
= 0;
8189 wstats
->qual
.level
= 0;
8191 if (ipw2100_get_ordinal(priv
, IPW_ORD_RSSI_AVG_CURR
,
8193 goto fail_get_ordinal
;
8194 wstats
->qual
.level
= rssi
+ IPW2100_RSSI_TO_DBM
;
8196 rssi_qual
= rssi
* POOR
/ 10;
8198 rssi_qual
= (rssi
- 10) * (FAIR
- POOR
) / 5 + POOR
;
8200 rssi_qual
= (rssi
- 15) * (GOOD
- FAIR
) / 5 + FAIR
;
8202 rssi_qual
= (rssi
- 20) * (VERY_GOOD
- GOOD
) /
8205 rssi_qual
= (rssi
- 30) * (PERFECT
- VERY_GOOD
) /
8208 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_PERCENT_RETRIES
,
8209 &tx_retries
, &ord_len
))
8210 goto fail_get_ordinal
;
8212 if (tx_retries
> 75)
8213 tx_qual
= (90 - tx_retries
) * POOR
/ 15;
8214 else if (tx_retries
> 70)
8215 tx_qual
= (75 - tx_retries
) * (FAIR
- POOR
) / 5 + POOR
;
8216 else if (tx_retries
> 65)
8217 tx_qual
= (70 - tx_retries
) * (GOOD
- FAIR
) / 5 + FAIR
;
8218 else if (tx_retries
> 50)
8219 tx_qual
= (65 - tx_retries
) * (VERY_GOOD
- GOOD
) /
8222 tx_qual
= (50 - tx_retries
) *
8223 (PERFECT
- VERY_GOOD
) / 50 + VERY_GOOD
;
8225 if (missed_beacons
> 50)
8226 beacon_qual
= (60 - missed_beacons
) * POOR
/ 10;
8227 else if (missed_beacons
> 40)
8228 beacon_qual
= (50 - missed_beacons
) * (FAIR
- POOR
) /
8230 else if (missed_beacons
> 32)
8231 beacon_qual
= (40 - missed_beacons
) * (GOOD
- FAIR
) /
8233 else if (missed_beacons
> 20)
8234 beacon_qual
= (32 - missed_beacons
) *
8235 (VERY_GOOD
- GOOD
) / 20 + GOOD
;
8237 beacon_qual
= (20 - missed_beacons
) *
8238 (PERFECT
- VERY_GOOD
) / 20 + VERY_GOOD
;
8240 quality
= min(tx_qual
, rssi_qual
);
8241 quality
= min(beacon_qual
, quality
);
8243 #ifdef CONFIG_IPW2100_DEBUG
8244 if (beacon_qual
== quality
)
8245 IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
8246 else if (tx_qual
== quality
)
8247 IPW_DEBUG_WX("Quality clamped by Tx Retries\n");
8248 else if (quality
!= 100)
8249 IPW_DEBUG_WX("Quality clamped by Signal Strength\n");
8251 IPW_DEBUG_WX("Quality not clamped.\n");
8254 wstats
->qual
.qual
= quality
;
8255 wstats
->qual
.level
= rssi
+ IPW2100_RSSI_TO_DBM
;
8258 wstats
->qual
.noise
= 0;
8259 wstats
->qual
.updated
= 7;
8260 wstats
->qual
.updated
|= IW_QUAL_NOISE_INVALID
;
8262 /* FIXME: this is percent and not a # */
8263 wstats
->miss
.beacon
= missed_beacons
;
8265 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_TX_FAILURES
,
8266 &tx_failures
, &ord_len
))
8267 goto fail_get_ordinal
;
8268 wstats
->discard
.retries
= tx_failures
;
8273 IPW_DEBUG_WX("failed querying ordinals.\n");
8275 return (struct iw_statistics
*)NULL
;
8278 static struct iw_handler_def ipw2100_wx_handler_def
= {
8279 .standard
= ipw2100_wx_handlers
,
8280 .num_standard
= ARRAY_SIZE(ipw2100_wx_handlers
),
8281 .num_private
= ARRAY_SIZE(ipw2100_private_handler
),
8282 .num_private_args
= ARRAY_SIZE(ipw2100_private_args
),
8283 .private = (iw_handler
*) ipw2100_private_handler
,
8284 .private_args
= (struct iw_priv_args
*)ipw2100_private_args
,
8285 .get_wireless_stats
= ipw2100_wx_wireless_stats
,
8288 static void ipw2100_wx_event_work(struct work_struct
*work
)
8290 struct ipw2100_priv
*priv
=
8291 container_of(work
, struct ipw2100_priv
, wx_event_work
.work
);
8292 union iwreq_data wrqu
;
8293 unsigned int len
= ETH_ALEN
;
8295 if (priv
->status
& STATUS_STOPPING
)
8298 mutex_lock(&priv
->action_mutex
);
8300 IPW_DEBUG_WX("enter\n");
8302 mutex_unlock(&priv
->action_mutex
);
8304 wrqu
.ap_addr
.sa_family
= ARPHRD_ETHER
;
8306 /* Fetch BSSID from the hardware */
8307 if (!(priv
->status
& (STATUS_ASSOCIATING
| STATUS_ASSOCIATED
)) ||
8308 priv
->status
& STATUS_RF_KILL_MASK
||
8309 ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
,
8310 &priv
->bssid
, &len
)) {
8311 memset(wrqu
.ap_addr
.sa_data
, 0, ETH_ALEN
);
8313 /* We now have the BSSID, so can finish setting to the full
8314 * associated state */
8315 memcpy(wrqu
.ap_addr
.sa_data
, priv
->bssid
, ETH_ALEN
);
8316 memcpy(priv
->ieee
->bssid
, priv
->bssid
, ETH_ALEN
);
8317 priv
->status
&= ~STATUS_ASSOCIATING
;
8318 priv
->status
|= STATUS_ASSOCIATED
;
8319 netif_carrier_on(priv
->net_dev
);
8320 netif_wake_queue(priv
->net_dev
);
8323 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8324 IPW_DEBUG_WX("Configuring ESSID\n");
8325 mutex_lock(&priv
->action_mutex
);
8326 /* This is a disassociation event, so kick the firmware to
8327 * look for another AP */
8328 if (priv
->config
& CFG_STATIC_ESSID
)
8329 ipw2100_set_essid(priv
, priv
->essid
, priv
->essid_len
,
8332 ipw2100_set_essid(priv
, NULL
, 0, 0);
8333 mutex_unlock(&priv
->action_mutex
);
8336 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
8339 #define IPW2100_FW_MAJOR_VERSION 1
8340 #define IPW2100_FW_MINOR_VERSION 3
8342 #define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8)
8343 #define IPW2100_FW_MAJOR(x) (x & 0xff)
8345 #define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \
8346 IPW2100_FW_MAJOR_VERSION)
8348 #define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \
8349 "." __stringify(IPW2100_FW_MINOR_VERSION)
8351 #define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw"
8355 BINARY FIRMWARE HEADER FORMAT
8359 2 2 mode == 0:BSS,1:IBSS,2:MONITOR
8362 C fw_len firmware data
8363 12 + fw_len uc_len microcode data
8367 struct ipw2100_fw_header
{
8370 unsigned int fw_size
;
8371 unsigned int uc_size
;
8374 static int ipw2100_mod_firmware_load(struct ipw2100_fw
*fw
)
8376 struct ipw2100_fw_header
*h
=
8377 (struct ipw2100_fw_header
*)fw
->fw_entry
->data
;
8379 if (IPW2100_FW_MAJOR(h
->version
) != IPW2100_FW_MAJOR_VERSION
) {
8380 printk(KERN_WARNING DRV_NAME
": Firmware image not compatible "
8381 "(detected version id of %u). "
8382 "See Documentation/networking/README.ipw2100\n",
8387 fw
->version
= h
->version
;
8388 fw
->fw
.data
= fw
->fw_entry
->data
+ sizeof(struct ipw2100_fw_header
);
8389 fw
->fw
.size
= h
->fw_size
;
8390 fw
->uc
.data
= fw
->fw
.data
+ h
->fw_size
;
8391 fw
->uc
.size
= h
->uc_size
;
8396 static int ipw2100_get_firmware(struct ipw2100_priv
*priv
,
8397 struct ipw2100_fw
*fw
)
8402 IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n",
8403 priv
->net_dev
->name
);
8405 switch (priv
->ieee
->iw_mode
) {
8407 fw_name
= IPW2100_FW_NAME("-i");
8409 #ifdef CONFIG_IPW2100_MONITOR
8410 case IW_MODE_MONITOR
:
8411 fw_name
= IPW2100_FW_NAME("-p");
8416 fw_name
= IPW2100_FW_NAME("");
8420 rc
= request_firmware(&fw
->fw_entry
, fw_name
, &priv
->pci_dev
->dev
);
8423 printk(KERN_ERR DRV_NAME
": "
8424 "%s: Firmware '%s' not available or load failed.\n",
8425 priv
->net_dev
->name
, fw_name
);
8428 IPW_DEBUG_INFO("firmware data %p size %zd\n", fw
->fw_entry
->data
,
8429 fw
->fw_entry
->size
);
8431 ipw2100_mod_firmware_load(fw
);
8436 MODULE_FIRMWARE(IPW2100_FW_NAME("-i"));
8437 #ifdef CONFIG_IPW2100_MONITOR
8438 MODULE_FIRMWARE(IPW2100_FW_NAME("-p"));
8440 MODULE_FIRMWARE(IPW2100_FW_NAME(""));
8442 static void ipw2100_release_firmware(struct ipw2100_priv
*priv
,
8443 struct ipw2100_fw
*fw
)
8446 release_firmware(fw
->fw_entry
);
8447 fw
->fw_entry
= NULL
;
8450 static int ipw2100_get_fwversion(struct ipw2100_priv
*priv
, char *buf
,
8453 char ver
[MAX_FW_VERSION_LEN
];
8454 u32 len
= MAX_FW_VERSION_LEN
;
8457 /* firmware version is an ascii string (max len of 14) */
8458 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_FW_VER_NUM
, ver
, &len
))
8463 for (i
= 0; i
< len
; i
++)
8469 static int ipw2100_get_ucodeversion(struct ipw2100_priv
*priv
, char *buf
,
8473 u32 len
= sizeof(ver
);
8474 /* microcode version is a 32 bit integer */
8475 if (ipw2100_get_ordinal(priv
, IPW_ORD_UCODE_VERSION
, &ver
, &len
))
8477 return snprintf(buf
, max
, "%08X", ver
);
8481 * On exit, the firmware will have been freed from the fw list
8483 static int ipw2100_fw_download(struct ipw2100_priv
*priv
, struct ipw2100_fw
*fw
)
8485 /* firmware is constructed of N contiguous entries, each entry is
8489 * 0 4 address to write to
8490 * 4 2 length of data run
8496 const unsigned char *firmware_data
= fw
->fw
.data
;
8497 unsigned int firmware_data_left
= fw
->fw
.size
;
8499 while (firmware_data_left
> 0) {
8500 addr
= *(u32
*) (firmware_data
);
8502 firmware_data_left
-= 4;
8504 len
= *(u16
*) (firmware_data
);
8506 firmware_data_left
-= 2;
8509 printk(KERN_ERR DRV_NAME
": "
8510 "Invalid firmware run-length of %d bytes\n",
8515 write_nic_memory(priv
->net_dev
, addr
, len
, firmware_data
);
8516 firmware_data
+= len
;
8517 firmware_data_left
-= len
;
8523 struct symbol_alive_response
{
8532 u16 clock_settle_time
; // 1us LSB
8533 u16 powerup_settle_time
; // 1us LSB
8534 u16 hop_settle_time
; // 1us LSB
8535 u8 date
[3]; // month, day, year
8536 u8 time
[2]; // hours, minutes
8540 static int ipw2100_ucode_download(struct ipw2100_priv
*priv
,
8541 struct ipw2100_fw
*fw
)
8543 struct net_device
*dev
= priv
->net_dev
;
8544 const unsigned char *microcode_data
= fw
->uc
.data
;
8545 unsigned int microcode_data_left
= fw
->uc
.size
;
8546 void __iomem
*reg
= priv
->ioaddr
;
8548 struct symbol_alive_response response
;
8552 /* Symbol control */
8553 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x703);
8555 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x707);
8559 write_nic_byte(dev
, 0x210014, 0x72); /* fifo width =16 */
8561 write_nic_byte(dev
, 0x210014, 0x72); /* fifo width =16 */
8564 /* EN_CS_ACCESS bit to reset control store pointer */
8565 write_nic_byte(dev
, 0x210000, 0x40);
8567 write_nic_byte(dev
, 0x210000, 0x0);
8569 write_nic_byte(dev
, 0x210000, 0x40);
8572 /* copy microcode from buffer into Symbol */
8574 while (microcode_data_left
> 0) {
8575 write_nic_byte(dev
, 0x210010, *microcode_data
++);
8576 write_nic_byte(dev
, 0x210010, *microcode_data
++);
8577 microcode_data_left
-= 2;
8580 /* EN_CS_ACCESS bit to reset the control store pointer */
8581 write_nic_byte(dev
, 0x210000, 0x0);
8584 /* Enable System (Reg 0)
8585 * first enable causes garbage in RX FIFO */
8586 write_nic_byte(dev
, 0x210000, 0x0);
8588 write_nic_byte(dev
, 0x210000, 0x80);
8591 /* Reset External Baseband Reg */
8592 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x703);
8594 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x707);
8597 /* HW Config (Reg 5) */
8598 write_nic_byte(dev
, 0x210014, 0x72); // fifo width =16
8600 write_nic_byte(dev
, 0x210014, 0x72); // fifo width =16
8603 /* Enable System (Reg 0)
8604 * second enable should be OK */
8605 write_nic_byte(dev
, 0x210000, 0x00); // clear enable system
8607 write_nic_byte(dev
, 0x210000, 0x80); // set enable system
8609 /* check Symbol is enabled - upped this from 5 as it wasn't always
8610 * catching the update */
8611 for (i
= 0; i
< 10; i
++) {
8614 /* check Dino is enabled bit */
8615 read_nic_byte(dev
, 0x210000, &data
);
8621 printk(KERN_ERR DRV_NAME
": %s: Error initializing Symbol\n",
8626 /* Get Symbol alive response */
8627 for (i
= 0; i
< 30; i
++) {
8628 /* Read alive response structure */
8630 j
< (sizeof(struct symbol_alive_response
) >> 1); j
++)
8631 read_nic_word(dev
, 0x210004, ((u16
*) & response
) + j
);
8633 if ((response
.cmd_id
== 1) && (response
.ucode_valid
== 0x1))
8639 printk(KERN_ERR DRV_NAME
8640 ": %s: No response from Symbol - hw not alive\n",
8642 printk_buf(IPW_DL_ERROR
, (u8
*) & response
, sizeof(response
));