drivers/net/wireless/iwlwifi/Kconfig

   1 config IWLWIFI
   2         tristate "Intel Wireless Wifi"
   3         depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
   4         select LIB80211
   5         select FW_LOADER
   6         select MAC80211_LEDS if IWLWIFI_LEDS
   7         select LEDS_CLASS if IWLWIFI_LEDS
   8         select RFKILL if IWLWIFI_RFKILL
   9         select MAC80211_LEDS if IWL3945_LEDS
  10         select LEDS_CLASS if IWL3945_LEDS
  11
  12 config IWLWIFI_LEDS
  13         bool "Enable LED support in iwlagn driver"
  14         depends on IWLWIFI
  15
  16 config IWLWIFI_RFKILL
  17         bool "Enable RF kill support in iwlagn and iwl3945 drivers"
  18         depends on IWLWIFI
  19
  20 config IWLWIFI_SPECTRUM_MEASUREMENT
  21         bool "Enable Spectrum Measurement in iwlagn driver"
  22         depends on IWLWIFI
  23         ---help---
  24           This option will enable spectrum measurement for the iwlagn driver.
  25
  26 config IWLWIFI_DEBUG
  27         bool "Enable full debugging output in iwlagn and iwl3945 drivers"
  28         depends on IWLWIFI
  29         ---help---
  30           This option will enable debug tracing output for the iwlwifi drivers
  31
  32           This will result in the kernel module being ~100k larger.  You can
  33           control which debug output is sent to the kernel log by setting the
  34           value in
  35
  36                 /sys/class/net/wlan0/device/debug_level
  37
  38           This entry will only exist if this option is enabled.
  39
  40           To set a value, simply echo an 8-byte hex value to the same file:
  41
  42                   % echo 0x43fff > /sys/class/net/wlan0/device/debug_level
  43
  44           You can find the list of debug mask values in:
  45                   drivers/net/wireless/iwlwifi/iwl-debug.h
  46
  47           If this is your first time using this driver, you should say Y here
  48           as the debug information can assist others in helping you resolve
  49           any problems you may encounter.
  50
  51 config IWLWIFI_DEBUGFS
  52         bool "iwlagn debugfs support"
  53         depends on IWLWIFI && IWLWIFI_DEBUG && MAC80211_DEBUGFS
  54         ---help---
  55           Enable creation of debugfs files for the iwlwifi drivers.
  56
  57 config IWLAGN
  58         tristate "Intel Wireless WiFi Next Gen AGN (iwlagn)"
  59         depends on IWLWIFI
  60         ---help---
  61           Select to build the driver supporting the:
  62
  63           Intel Wireless WiFi Link Next-Gen AGN
  64
  65           This driver uses the kernel's mac80211 subsystem.
  66
  67           In order to use this driver, you will need a microcode (uCode)
  68           image for it. You can obtain the microcode from:
  69
  70                   <http://intellinuxwireless.org/>.
  71
  72           The microcode is typically installed in /lib/firmware. You can
  73           look in the hotplug script /etc/hotplug/firmware.agent to
  74           determine which directory FIRMWARE_DIR is set to when the script
  75           runs.
  76
  77           If you want to compile the driver as a module ( = code which can be
  78           inserted in and removed from the running kernel whenever you want),
  79           say M here and read <file:Documentation/kbuild/modules.txt>.  The
  80           module will be called iwlagn.ko.
  81
  82
  83 config IWL4965
  84         bool "Intel Wireless WiFi 4965AGN"
  85         depends on IWLAGN
  86         ---help---
  87           This option enables support for Intel Wireless WiFi Link 4965AGN
  88
  89 config IWL5000
  90         bool "Intel Wireless WiFi 5000AGN; Intel WiFi Link 100, 6000, and 6050 Series"
  91         depends on IWLAGN
  92         ---help---
  93           This option enables support for Intel Wireless WiFi Link 5000AGN Family
  94
  95 config IWL3945
  96         tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)"
  97         depends on IWLWIFI
  98         ---help---
  99           Select to build the driver supporting the:
 100
 101           Intel PRO/Wireless 3945ABG/BG Network Connection
 102
 103           This driver uses the kernel's mac80211 subsystem.
 104
 105           In order to use this driver, you will need a microcode (uCode)
 106           image for it. You can obtain the microcode from:
 107
 108                   <http://intellinuxwireless.org/>.
 109
 110           The microcode is typically installed in /lib/firmware. You can
 111           look in the hotplug script /etc/hotplug/firmware.agent to
 112           determine which directory FIRMWARE_DIR is set to when the script
 113           runs.
 114
 115           If you want to compile the driver as a module ( = code which can be
 116           inserted in and removed from the running kernel whenever you want),
 117           say M here and read <file:Documentation/kbuild/modules.txt>.  The
 118           module will be called iwl3945.ko.
 119
 120 config IWL3945_SPECTRUM_MEASUREMENT
 121         bool "Enable Spectrum Measurement in iwl3945 driver"
 122         depends on IWL3945
 123         ---help---
 124           This option will enable spectrum measurement for the iwl3945 driver.
 125
 126 config IWL3945_LEDS
 127         bool "Enable LEDS features in iwl3945 driver"
 128         depends on IWL3945
 129         ---help---
 130           This option enables LEDS for the iwl3945 driver.