1 /******************************************************************************
3 * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 *****************************************************************************/
27 * Please use this file (iwl-dev.h) for driver implementation definitions.
28 * Please use iwl-commands.h for uCode API definitions.
29 * Please use iwl-4965-hw.h for hardware-related definitions.
35 #include <linux/pci.h> /* for struct pci_device_id */
36 #include <linux/kernel.h>
37 #include <net/ieee80211_radiotap.h>
39 #include "iwl-rfkill.h"
40 #include "iwl-eeprom.h"
41 #include "iwl-4965-hw.h"
42 #include "iwl-3945-hw.h"
43 #include "iwl-3945-led.h"
46 #include "iwl-debug.h"
48 #include "iwl-power.h"
49 #include "iwl-agn-rs.h"
51 /* configuration for the iwl4965 */
52 extern struct iwl_cfg iwl4965_agn_cfg
;
53 extern struct iwl_cfg iwl5300_agn_cfg
;
54 extern struct iwl_cfg iwl5100_agn_cfg
;
55 extern struct iwl_cfg iwl5350_agn_cfg
;
56 extern struct iwl_cfg iwl5100_bg_cfg
;
57 extern struct iwl_cfg iwl5100_abg_cfg
;
58 extern struct iwl_cfg iwl5150_agn_cfg
;
60 /* CT-KILL constants */
61 #define CT_KILL_THRESHOLD 110 /* in Celsius */
63 /* Default noise level to report when noise measurement is not available.
64 * This may be because we're:
65 * 1) Not associated (4965, no beacon statistics being sent to driver)
66 * 2) Scanning (noise measurement does not apply to associated channel)
67 * 3) Receiving CCK (3945 delivers noise info only for OFDM frames)
68 * Use default noise value of -127 ... this is below the range of measurable
69 * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
70 * Also, -127 works better than 0 when averaging frames with/without
71 * noise info (e.g. averaging might be done in app); measured dBm values are
72 * always negative ... using a negative value as the default keeps all
73 * averages within an s8's (used in some apps) range of negative values. */
74 #define IWL_NOISE_MEAS_NOT_AVAILABLE (-127)
77 * RTS threshold here is total size [2347] minus 4 FCS bytes
79 * a value of 0 means RTS on all data/management packets
80 * a value > max MSDU size means no RTS
81 * else RTS for data/management frames where MPDU is larger
84 #define DEFAULT_RTS_THRESHOLD 2347U
85 #define MIN_RTS_THRESHOLD 0U
86 #define MAX_RTS_THRESHOLD 2347U
87 #define MAX_MSDU_SIZE 2304U
88 #define MAX_MPDU_SIZE 2346U
89 #define DEFAULT_BEACON_INTERVAL 100U
90 #define DEFAULT_SHORT_RETRY_LIMIT 7U
91 #define DEFAULT_LONG_RETRY_LIMIT 4U
93 struct iwl_rx_mem_buffer
{
94 dma_addr_t real_dma_addr
;
95 dma_addr_t aligned_dma_addr
;
97 struct list_head list
;
101 * Generic queue structure
103 * Contains common data for Rx and Tx queues
106 int n_bd
; /* number of BDs in this queue */
107 int write_ptr
; /* 1-st empty entry (index) host_w*/
108 int read_ptr
; /* last used entry (index) host_r*/
109 dma_addr_t dma_addr
; /* physical addr for BD's */
110 int n_window
; /* safe queue window */
112 int low_mark
; /* low watermark, resume queue if free
113 * space more than this */
114 int high_mark
; /* high watermark, stop queue if free
115 * space less than this */
116 } __attribute__ ((packed
));
118 /* One for each TFD */
120 struct sk_buff
*skb
[IWL_NUM_OF_TBS
- 1];
124 * struct iwl_tx_queue - Tx Queue for DMA
125 * @q: generic Rx/Tx queue descriptor
126 * @bd: base of circular buffer of TFDs
127 * @cmd: array of command/Tx buffers
128 * @dma_addr_cmd: physical address of cmd/tx buffer array
129 * @txb: array of per-TFD driver data
130 * @need_update: indicates need to update read/write index
131 * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled
133 * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
134 * descriptors) and required locking structures.
136 struct iwl_tx_queue
{
138 struct iwl_tfd
*tfds
;
139 struct iwl_cmd
*cmd
[TFD_TX_CMD_SLOTS
];
140 struct iwl_tx_info
*txb
;
147 #define IWL_NUM_SCAN_RATES (2)
149 struct iwl4965_channel_tgd_info
{
154 struct iwl4965_channel_tgh_info
{
158 #define IWL4965_MAX_RATE (33)
160 struct iwl3945_clip_group
{
161 /* maximum power level to prevent clipping for each rate, derived by
162 * us from this band's saturation power in EEPROM */
163 const s8 clip_powers
[IWL_MAX_RATES
];
166 /* current Tx power values to use, one for each rate for each channel.
167 * requested power is limited by:
168 * -- regulatory EEPROM limits for this channel
169 * -- hardware capabilities (clip-powers)
170 * -- spectrum management
171 * -- user preference (e.g. iwconfig)
172 * when requested power is set, base power index must also be set. */
173 struct iwl3945_channel_power_info
{
174 struct iwl3945_tx_power tpc
; /* actual radio and DSP gain settings */
175 s8 power_table_index
; /* actual (compenst'd) index into gain table */
176 s8 base_power_index
; /* gain index for power at factory temp. */
177 s8 requested_power
; /* power (dBm) requested for this chnl/rate */
180 /* current scan Tx power values to use, one for each scan rate for each
182 struct iwl3945_scan_power_info
{
183 struct iwl3945_tx_power tpc
; /* actual radio and DSP gain settings */
184 s8 power_table_index
; /* actual (compenst'd) index into gain table */
185 s8 requested_power
; /* scan pwr (dBm) requested for chnl/rate */
189 * One for each channel, holds all channel setup data
190 * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
193 struct iwl_channel_info
{
194 struct iwl4965_channel_tgd_info tgd
;
195 struct iwl4965_channel_tgh_info tgh
;
196 struct iwl_eeprom_channel eeprom
; /* EEPROM regulatory limit */
197 struct iwl_eeprom_channel fat_eeprom
; /* EEPROM regulatory limit for
200 u8 channel
; /* channel number */
201 u8 flags
; /* flags copied from EEPROM */
202 s8 max_power_avg
; /* (dBm) regul. eeprom, normal Tx, any rate */
203 s8 curr_txpow
; /* (dBm) regulatory/spectrum/user (not h/w) limit */
204 s8 min_power
; /* always 0 */
205 s8 scan_power
; /* (dBm) regul. eeprom, direct scans, any rate */
207 u8 group_index
; /* 0-4, maps channel to group1/2/3/4/5 */
208 u8 band_index
; /* 0-4, maps channel to band1/2/3/4/5 */
209 enum ieee80211_band band
;
211 /* FAT channel info */
212 s8 fat_max_power_avg
; /* (dBm) regul. eeprom, normal Tx, any rate */
213 s8 fat_curr_txpow
; /* (dBm) regulatory/spectrum/user (not h/w) */
214 s8 fat_min_power
; /* always 0 */
215 s8 fat_scan_power
; /* (dBm) eeprom, direct scans, any rate */
216 u8 fat_flags
; /* flags copied from EEPROM */
217 u8 fat_extension_channel
; /* HT_IE_EXT_CHANNEL_* */
219 /* Radio/DSP gain settings for each "normal" data Tx rate.
220 * These include, in addition to RF and DSP gain, a few fields for
221 * remembering/modifying gain settings (indexes). */
222 struct iwl3945_channel_power_info power_info
[IWL4965_MAX_RATE
];
224 /* Radio/DSP gain settings for each scan rate, for directed scans. */
225 struct iwl3945_scan_power_info scan_pwr_info
[IWL_NUM_SCAN_RATES
];
229 * struct iwl3945_tx_queue - Tx Queue for DMA
230 * @q: generic Rx/Tx queue descriptor
231 * @bd: base of circular buffer of TFDs
232 * @cmd: array of command/Tx buffers
233 * @dma_addr_cmd: physical address of cmd/tx buffer array
234 * @txb: array of per-TFD driver data
235 * @need_update: indicates need to update read/write index
237 * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
238 * descriptors) and required locking structures.
240 struct iwl3945_tx_queue
{
242 struct iwl3945_tfd_frame
*bd
;
244 dma_addr_t dma_addr_cmd
;
245 struct iwl3945_tx_info
*txb
;
250 #define IWL_TX_FIFO_AC0 0
251 #define IWL_TX_FIFO_AC1 1
252 #define IWL_TX_FIFO_AC2 2
253 #define IWL_TX_FIFO_AC3 3
254 #define IWL_TX_FIFO_HCCA_1 5
255 #define IWL_TX_FIFO_HCCA_2 6
256 #define IWL_TX_FIFO_NONE 7
258 /* Minimum number of queues. MAX_NUM is defined in hw specific files */
259 #define IWL_MIN_NUM_QUEUES 4
261 /* Power management (not Tx power) structures */
268 #define IEEE80211_DATA_LEN 2304
269 #define IEEE80211_4ADDR_LEN 30
270 #define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
271 #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
275 struct ieee80211_hdr frame
;
276 struct iwl_tx_beacon_cmd beacon
;
277 u8 raw
[IEEE80211_FRAME_LEN
];
280 struct list_head list
;
283 #define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
284 #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
285 #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
288 /* CMD_SIZE_NORMAL = 0, */
289 CMD_SIZE_HUGE
= (1 << 0),
291 CMD_ASYNC
= (1 << 1),
292 /* CMD_NO_SKB = 0, */
293 CMD_WANT_SKB
= (1 << 2),
299 struct iwl_cmd_meta
{
300 struct iwl_cmd_meta
*source
;
303 int (*callback
)(struct iwl_priv
*priv
,
304 struct iwl_cmd
*cmd
, struct sk_buff
*skb
);
305 } __attribute__ ((packed
)) u
;
307 /* The CMD_SIZE_HUGE flag bit indicates that the command
308 * structure is stored at the end of the shared queue memory. */
310 DECLARE_PCI_UNMAP_ADDR(mapping
)
311 DECLARE_PCI_UNMAP_LEN(len
)
312 } __attribute__ ((packed
));
314 #define IWL_CMD_MAX_PAYLOAD 320
319 * For allocation of the command and tx queues, this establishes the overall
320 * size of the largest command we send to uCode, except for a scan command
321 * (which is relatively huge; space is allocated separately).
324 struct iwl_cmd_meta meta
; /* driver data */
325 struct iwl_cmd_header hdr
; /* uCode API */
331 struct iwl_tx_cmd tx
;
332 u8 payload
[IWL_CMD_MAX_PAYLOAD
];
333 } __attribute__ ((packed
)) cmd
;
334 } __attribute__ ((packed
));
337 struct iwl_host_cmd
{
340 struct iwl_cmd_meta meta
;
344 #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_cmd) - \
345 sizeof(struct iwl_cmd_meta))
348 * RX related structures and functions
350 #define RX_FREE_BUFFERS 64
351 #define RX_LOW_WATERMARK 8
353 #define SUP_RATE_11A_MAX_NUM_CHANNELS 8
354 #define SUP_RATE_11B_MAX_NUM_CHANNELS 4
355 #define SUP_RATE_11G_MAX_NUM_CHANNELS 12
358 * struct iwl_rx_queue - Rx queue
359 * @read: Shared index to newest available Rx buffer
360 * @write: Shared index to oldest written Rx packet
361 * @free_count: Number of pre-allocated buffers in rx_free
362 * @rx_free: list of free SKBs for use
363 * @rx_used: List of Rx buffers with no SKB
364 * @need_update: flag to indicate we need to update read/write index
366 * NOTE: rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers
368 struct iwl_rx_queue
{
371 struct iwl_rx_mem_buffer pool
[RX_QUEUE_SIZE
+ RX_FREE_BUFFERS
];
372 struct iwl_rx_mem_buffer
*queue
[RX_QUEUE_SIZE
];
376 struct list_head rx_free
;
377 struct list_head rx_used
;
379 struct iwl_rb_status
*rb_stts
;
380 dma_addr_t rb_stts_dma
;
384 #define IWL_SUPPORTED_RATES_IE_LEN 8
386 #define MAX_TID_COUNT 9
388 #define IWL_INVALID_RATE 0xFF
389 #define IWL_INVALID_VALUE -1
392 * struct iwl_ht_agg -- aggregation status while waiting for block-ack
393 * @txq_id: Tx queue used for Tx attempt
394 * @frame_count: # frames attempted by Tx command
395 * @wait_for_ba: Expect block-ack before next Tx reply
396 * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx window
397 * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx window
398 * @bitmap1: High order, one bit for each frame pending ACK in Tx window
399 * @rate_n_flags: Rate at which Tx was attempted
401 * If REPLY_TX indicates that aggregation was attempted, driver must wait
402 * for block ack (REPLY_COMPRESSED_BA). This struct stores tx reply info
403 * until block ack arrives.
412 #define IWL_AGG_OFF 0
414 #define IWL_EMPTYING_HW_QUEUE_ADDBA 2
415 #define IWL_EMPTYING_HW_QUEUE_DELBA 3
420 struct iwl_tid_data
{
423 struct iwl_ht_agg agg
;
427 enum ieee80211_key_alg alg
;
433 union iwl_ht_rate_supp
{
441 #define CFG_HT_RX_AMPDU_FACTOR_DEF (0x3)
442 #define CFG_HT_MPDU_DENSITY_2USEC (0x5)
443 #define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_2USEC
446 /* self configuration data */
448 u8 supported_chan_width
;
451 u8 sgf
; /* HT_SHORT_GI_* short guard interval */
455 struct ieee80211_mcs_info mcs
;
456 /* BSS related data */
457 u8 extension_chan_offset
;
460 u8 non_GF_STA_present
;
463 union iwl_qos_capabity
{
465 u8 edca_count
:4; /* bit 0-3 */
466 u8 q_ack
:1; /* bit 4 */
467 u8 queue_request
:1; /* bit 5 */
468 u8 txop_request
:1; /* bit 6 */
469 u8 reserved
:1; /* bit 7 */
472 u8 acvo_APSD
:1; /* bit 0 */
473 u8 acvi_APSD
:1; /* bit 1 */
474 u8 ac_bk_APSD
:1; /* bit 2 */
475 u8 ac_be_APSD
:1; /* bit 3 */
476 u8 q_ack
:1; /* bit 4 */
477 u8 max_len
:2; /* bit 5-6 */
478 u8 more_data_ack
:1; /* bit 7 */
484 struct iwl_qos_info
{
486 union iwl_qos_capabity qos_cap
;
487 struct iwl_qosparam_cmd def_qos_parm
;
490 #define STA_PS_STATUS_WAKE 0
491 #define STA_PS_STATUS_SLEEP 1
493 struct iwl3945_tid_data
{
497 struct iwl3945_hw_key
{
498 enum ieee80211_key_alg alg
;
503 struct iwl3945_station_entry
{
504 struct iwl3945_addsta_cmd sta
;
505 struct iwl3945_tid_data tid
[MAX_TID_COUNT
];
508 struct iwl3945_hw_key keyinfo
;
511 struct iwl_station_entry
{
512 struct iwl_addsta_cmd sta
;
513 struct iwl_tid_data tid
[MAX_TID_COUNT
];
516 struct iwl_hw_key keyinfo
;
519 /* one for each uCode image (inst/data, boot/init/runtime) */
521 void *v_addr
; /* access by driver */
522 dma_addr_t p_addr
; /* access by card's busmaster DMA */
526 /* uCode file layout */
528 __le32 ver
; /* major/minor/API/serial */
529 __le32 inst_size
; /* bytes of runtime instructions */
530 __le32 data_size
; /* bytes of runtime data */
531 __le32 init_size
; /* bytes of initialization instructions */
532 __le32 init_data_size
; /* bytes of initialization data */
533 __le32 boot_size
; /* bytes of bootstrap instructions */
534 u8 data
[0]; /* data in same order as "size" elements */
537 struct iwl4965_ibss_seq
{
541 unsigned long packet_time
;
542 struct list_head list
;
545 struct iwl_sensitivity_ranges
{
552 u16 auto_corr_min_ofdm
;
553 u16 auto_corr_min_ofdm_mrc
;
554 u16 auto_corr_min_ofdm_x1
;
555 u16 auto_corr_min_ofdm_mrc_x1
;
557 u16 auto_corr_max_ofdm
;
558 u16 auto_corr_max_ofdm_mrc
;
559 u16 auto_corr_max_ofdm_x1
;
560 u16 auto_corr_max_ofdm_mrc_x1
;
562 u16 auto_corr_max_cck
;
563 u16 auto_corr_max_cck_mrc
;
564 u16 auto_corr_min_cck
;
565 u16 auto_corr_min_cck_mrc
;
569 #define KELVIN_TO_CELSIUS(x) ((x)-273)
570 #define CELSIUS_TO_KELVIN(x) ((x)+273)
574 * struct iwl_hw_params
575 * @max_txq_num: Max # Tx queues supported
576 * @dma_chnl_num: Number of Tx DMA/FIFO channels
577 * @scd_bc_tbls_size: size of scheduler byte count tables
578 * @tx/rx_chains_num: Number of TX/RX chains
579 * @valid_tx/rx_ant: usable antennas
580 * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2)
581 * @max_rxq_log: Log-base-2 of max_rxq_size
582 * @rx_buf_size: Rx buffer size
585 * @fat_channel: is 40MHz width possible in band 2.4
586 * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ)
587 * @sw_crypto: 0 for hw, 1 for sw
588 * @max_xxx_size: for ucode uses
589 * @ct_kill_threshold: temperature threshold
590 * @calib_init_cfg: setup initial calibrations for the hw
591 * @struct iwl_sensitivity_ranges: range of sensitivity values
593 struct iwl_hw_params
{
596 u16 scd_bc_tbls_size
;
612 u32 ct_kill_threshold
; /* value in hw-dependent units */
614 const struct iwl_sensitivity_ranges
*sens
;
621 /******************************************************************************
623 * Functions implemented in core module which are forward declared here
624 * for use by iwl-[4-5].c
626 * NOTE: The implementation of these functions are not hardware specific
627 * which is why they are in the core module files.
629 * Naming convention --
630 * iwl_ <-- Is part of iwlwifi
631 * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
632 * iwl4965_bg_ <-- Called from work queue context
633 * iwl4965_mac_ <-- mac80211 callback
635 ****************************************************************************/
636 extern void iwl_update_chain_flags(struct iwl_priv
*priv
);
637 extern int iwl_set_pwr_src(struct iwl_priv
*priv
, enum iwl_pwr_src src
);
638 extern const u8 iwl_bcast_addr
[ETH_ALEN
];
639 extern int iwl_rxq_stop(struct iwl_priv
*priv
);
640 extern void iwl_txq_ctx_stop(struct iwl_priv
*priv
);
641 extern int iwl_queue_space(const struct iwl_queue
*q
);
642 static inline int iwl_queue_used(const struct iwl_queue
*q
, int i
)
644 return q
->write_ptr
> q
->read_ptr
?
645 (i
>= q
->read_ptr
&& i
< q
->write_ptr
) :
646 !(i
< q
->read_ptr
&& i
>= q
->write_ptr
);
650 static inline u8
get_cmd_index(struct iwl_queue
*q
, u32 index
, int is_huge
)
652 /* This is for scan command, the big buffer at end of command array */
654 return q
->n_window
; /* must be power of 2 */
656 /* Otherwise, use normal size buffers */
657 return index
& (q
->n_window
- 1);
667 #define HT_SHORT_GI_20MHZ (1 << 0)
668 #define HT_SHORT_GI_40MHZ (1 << 1)
670 #define IWL_CHANNEL_WIDTH_20MHZ 0
671 #define IWL_CHANNEL_WIDTH_40MHZ 1
673 #define IWL_OPERATION_MODE_AUTO 0
674 #define IWL_OPERATION_MODE_HT_ONLY 1
675 #define IWL_OPERATION_MODE_MIXED 2
676 #define IWL_OPERATION_MODE_20MHZ 3
678 #define IWL_TX_CRC_SIZE 4
679 #define IWL_TX_DELIMITER_SIZE 4
681 #define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000
683 /* Sensitivity and chain noise calibration */
684 #define INITIALIZATION_VALUE 0xFFFF
685 #define CAL_NUM_OF_BEACONS 20
686 #define MAXIMUM_ALLOWED_PATHLOSS 15
688 #define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
690 #define MAX_FA_OFDM 50
691 #define MIN_FA_OFDM 5
692 #define MAX_FA_CCK 50
695 #define AUTO_CORR_STEP_OFDM 1
697 #define AUTO_CORR_STEP_CCK 3
698 #define AUTO_CORR_MAX_TH_CCK 160
701 #define NRG_STEP_CCK 2
703 #define MAX_NUMBER_CCK_NO_FA 100
705 #define AUTO_CORR_CCK_MIN_VAL_DEF (125)
710 #define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
711 #define ALL_BAND_FILTER 0xFF00
712 #define IN_BAND_FILTER 0xFF
713 #define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF
715 #define NRG_NUM_PREV_STAT_L 20
716 #define NUM_RX_CHAINS 3
718 enum iwl4965_false_alarm_state
{
721 IWL_FA_GOOD_RANGE
= 2,
724 enum iwl4965_chain_noise_state
{
725 IWL_CHAIN_NOISE_ALIVE
= 0, /* must be 0 */
726 IWL_CHAIN_NOISE_ACCUMULATE
,
727 IWL_CHAIN_NOISE_CALIBRATED
,
728 IWL_CHAIN_NOISE_DONE
,
731 enum iwl4965_calib_enabled_state
{
732 IWL_CALIB_DISABLED
= 0, /* must be 0 */
733 IWL_CALIB_ENABLED
= 1,
739 * defines the order in which results of initial calibrations
740 * should be sent to the runtime uCode
747 IWL_CALIB_TX_IQ_PERD
,
752 /* Opaque calibration results */
753 struct iwl_calib_result
{
764 /* Sensitivity calib data */
765 struct iwl_sensitivity_data
{
767 u32 auto_corr_ofdm_mrc
;
768 u32 auto_corr_ofdm_x1
;
769 u32 auto_corr_ofdm_mrc_x1
;
771 u32 auto_corr_cck_mrc
;
773 u32 last_bad_plcp_cnt_ofdm
;
774 u32 last_fa_cnt_ofdm
;
775 u32 last_bad_plcp_cnt_cck
;
781 u8 nrg_silence_rssi
[NRG_NUM_PREV_STAT_L
];
786 s32 nrg_auto_corr_silence_diff
;
787 u32 num_in_cck_no_fa
;
791 /* Chain noise (differential Rx gain) calib data */
792 struct iwl_chain_noise_data
{
801 u8 disconn_array
[NUM_RX_CHAINS
];
802 u8 delta_gain_code
[NUM_RX_CHAINS
];
807 #define EEPROM_SEM_TIMEOUT 10 /* milliseconds */
808 #define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
812 MEASUREMENT_READY
= (1 << 0),
813 MEASUREMENT_ACTIVE
= (1 << 1),
817 #define IWL_MAX_NUM_QUEUES 20 /* FIXME: do dynamic allocation */
821 /* ieee device used by generic ieee processing code */
822 struct ieee80211_hw
*hw
;
823 struct ieee80211_channel
*ieee_channels
;
824 struct ieee80211_rate
*ieee_rates
;
827 /* temporary frame storage list */
828 struct list_head free_frames
;
831 enum ieee80211_band band
;
834 void (*rx_handlers
[REPLY_MAX
])(struct iwl_priv
*priv
,
835 struct iwl_rx_mem_buffer
*rxb
);
837 struct ieee80211_supported_band bands
[IEEE80211_NUM_BANDS
];
839 #if defined(CONFIG_IWLAGN_SPECTRUM_MEASUREMENT) || defined(CONFIG_IWL3945_SPECTRUM_MEASUREMENT)
840 /* spectrum measurement report caching */
841 struct iwl_spectrum_notification measure_report
;
842 u8 measurement_status
;
844 /* ucode beacon time */
845 u32 ucode_beacon_time
;
847 /* we allocate array of iwl4965_channel_info for NIC's valid channels.
848 * Access via channel # using indirect index array */
849 struct iwl_channel_info
*channel_info
; /* channel info array */
850 u8 channel_count
; /* # of channels */
852 /* each calibration channel group in the EEPROM has a derived
853 * clip setting for each rate. 3945 only.*/
854 const struct iwl3945_clip_group clip39_groups
[5];
856 /* thermal calibration */
857 s32 temperature
; /* degrees Kelvin */
858 s32 last_temperature
;
860 /* init calibration results */
861 struct iwl_calib_result calib_results
[IWL_CALIB_MAX
];
863 /* Scan related variables */
864 unsigned long last_scan_jiffies
;
865 unsigned long next_scan_jiffies
;
866 unsigned long scan_start
;
867 unsigned long scan_pass_start
;
868 unsigned long scan_start_tsf
;
869 struct iwl_scan_cmd
*scan
;
873 u8 direct_ssid
[IW_ESSID_MAX_SIZE
];
874 u8 scan_tx_ant
[IEEE80211_NUM_BANDS
];
878 spinlock_t lock
; /* protect general shared data */
879 spinlock_t hcmd_lock
; /* protect hcmd */
882 /* basic pci-network driver stuff */
883 struct pci_dev
*pci_dev
;
885 /* pci hardware address support */
886 void __iomem
*hw_base
;
891 /* uCode images, save to reload in case of failure */
892 u32 ucode_ver
; /* version of ucode, copy of
894 struct fw_desc ucode_code
; /* runtime inst */
895 struct fw_desc ucode_data
; /* runtime data original */
896 struct fw_desc ucode_data_backup
; /* runtime data save/restore */
897 struct fw_desc ucode_init
; /* initialization inst */
898 struct fw_desc ucode_init_data
; /* initialization data */
899 struct fw_desc ucode_boot
; /* bootstrap inst */
900 enum ucode_type ucode_type
;
901 u8 ucode_write_complete
; /* the image write is complete */
904 struct iwl_rxon_time_cmd rxon_timing
;
906 /* We declare this const so it can only be
907 * changed via explicit cast within the
908 * routines that actually update the physical
910 const struct iwl_rxon_cmd active_rxon
;
911 struct iwl_rxon_cmd staging_rxon
;
913 int error_recovering
;
914 struct iwl_rxon_cmd recovery_rxon
;
916 /* 1st responses from initialize and runtime uCode images.
917 * 4965's initialize alive response contains some calibration data. */
918 struct iwl_init_alive_resp card_alive_init
;
919 struct iwl_alive_resp card_alive
;
920 #if defined(CONFIG_IWLWIFI_RFKILL) || defined(CONFIG_IWL3945_RFKILL)
921 struct rfkill
*rfkill
;
924 #if defined(CONFIG_IWLWIFI_LEDS) || defined(CONFIG_IWL3945_LEDS)
925 unsigned long last_blink_time
;
931 #ifdef CONFIG_IWLWIFI_LEDS
932 struct iwl_led led
[IWL_LED_TRG_MAX
];
935 #ifdef CONFIG_IWL3945_LEDS
936 struct iwl3945_led led39
[IWL_LED_TRG_MAX
];
937 unsigned int rxtxpackets
;
940 u16 active_rate_basic
;
942 u8 assoc_station_added
;
944 struct iwl_sensitivity_data sensitivity_data
;
945 struct iwl_chain_noise_data chain_noise_data
;
946 __le16 sensitivity_tbl
[HD_TABLE_SIZE
];
948 struct iwl_ht_info current_ht_config
;
949 u8 last_phy_res
[100];
951 /* Rate scaling data */
955 wait_queue_head_t wait_command_queue
;
957 int activity_timer_active
;
959 /* Rx and Tx DMA processing queues */
960 struct iwl_rx_queue rxq
;
961 struct iwl_tx_queue txq
[IWL_MAX_NUM_QUEUES
];
962 unsigned long txq_ctx_active_msk
;
963 struct iwl_dma_ptr kw
; /* keep warm address */
964 struct iwl_dma_ptr scd_bc_tbls
;
966 u32 scd_base_addr
; /* scheduler sram base address */
968 unsigned long status
;
970 int last_rx_rssi
; /* From Rx packet statistics */
971 int last_rx_noise
; /* From beacon statistics */
973 /* counts mgmt, ctl, and data packets */
974 struct traffic_stats
{
977 } tx_stats
[3], rx_stats
[3];
979 struct iwl_power_mgr power_data
;
981 struct iwl_notif_statistics statistics
;
982 unsigned long last_statistics_time
;
984 /* context information */
991 u8 mac_addr
[ETH_ALEN
];
993 /*station table variables */
996 struct iwl_station_entry stations
[IWL_STATION_COUNT
];
997 struct iwl_wep_key wep_keys
[WEP_KEYS_MAX
];
1000 unsigned long ucode_key_table
;
1002 /* Indication if ieee80211_ops->open has been called */
1005 u8 mac80211_registered
;
1007 /* Rx'd packet timing information */
1008 u32 last_beacon_time
;
1013 struct iwl_eeprom_calib_info
*calib_info
;
1015 enum nl80211_iftype iw_mode
;
1017 struct sk_buff
*ibss_beacon
;
1019 /* Last Rx'd beacon timestamp */
1022 struct ieee80211_vif
*vif
;
1026 dma_addr_t shared_phys
;
1028 struct iwl_hw_params hw_params
;
1031 /* Current association information needed to configure the
1034 u16 assoc_capability
;
1036 struct iwl_qos_info qos_data
;
1038 struct workqueue_struct
*workqueue
;
1040 struct work_struct up
;
1041 struct work_struct restart
;
1042 struct work_struct calibrated_work
;
1043 struct work_struct scan_completed
;
1044 struct work_struct rx_replenish
;
1045 struct work_struct rf_kill
;
1046 struct work_struct abort_scan
;
1047 struct work_struct update_link_led
;
1048 struct work_struct auth_work
;
1049 struct work_struct report_work
;
1050 struct work_struct request_scan
;
1051 struct work_struct beacon_update
;
1053 struct tasklet_struct irq_tasklet
;
1055 struct delayed_work set_power_save
;
1056 struct delayed_work init_alive_start
;
1057 struct delayed_work alive_start
;
1058 struct delayed_work scan_check
;
1061 struct delayed_work thermal_periodic
;
1064 s8 tx_power_user_lmt
;
1065 s8 tx_power_channel_lmt
;
1068 #if defined(CONFIG_IWLWIFI_DEBUG) || defined(CONFIG_IWL3945_DEBUG)
1069 /* debugging info */
1072 atomic_t restrict_refcnt
;
1073 #ifdef CONFIG_IWLWIFI_DEBUGFS
1075 struct iwl_debugfs
*dbgfs
;
1076 #endif /* CONFIG_IWLWIFI_DEBUGFS */
1077 #endif /* CONFIG_IWLWIFI_DEBUG */
1079 struct work_struct txpower_work
;
1080 u32 disable_sens_cal
;
1081 u32 disable_chain_noise_cal
;
1082 u32 disable_tx_power_cal
;
1083 struct work_struct run_time_calib_work
;
1084 struct timer_list statistics_periodic
;
1087 #define IWL_DEFAULT_TX_POWER 0x0F
1088 s8 user_txpower_limit
;
1089 s8 max_channel_txpower_limit
;
1091 struct iwl3945_scan_cmd
*scan39
;
1093 /* We declare this const so it can only be
1094 * changed via explicit cast within the
1095 * routines that actually update the physical
1097 const struct iwl3945_rxon_cmd active39_rxon
;
1098 struct iwl3945_rxon_cmd staging39_rxon
;
1099 struct iwl3945_rxon_cmd recovery39_rxon
;
1101 struct iwl3945_tx_queue txq39
[IWL39_MAX_NUM_QUEUES
];
1103 struct iwl3945_power_mgr power_data_39
;
1104 struct iwl3945_notif_statistics statistics_39
;
1106 struct iwl3945_station_entry stations_39
[IWL_STATION_COUNT
];
1109 struct iwl3945_eeprom eeprom39
;
1112 u8 call_post_assoc_from_beacon
;
1116 static inline void iwl_txq_ctx_activate(struct iwl_priv
*priv
, int txq_id
)
1118 set_bit(txq_id
, &priv
->txq_ctx_active_msk
);
1121 static inline void iwl_txq_ctx_deactivate(struct iwl_priv
*priv
, int txq_id
)
1123 clear_bit(txq_id
, &priv
->txq_ctx_active_msk
);
1126 #ifdef CONFIG_IWLWIFI_DEBUG
1127 const char *iwl_get_tx_fail_reason(u32 status
);
1129 static inline const char *iwl_get_tx_fail_reason(u32 status
) { return ""; }
1133 static inline struct ieee80211_hdr
*iwl_tx_queue_get_hdr(struct iwl_priv
*priv
,
1134 int txq_id
, int idx
)
1136 if (priv
->txq
[txq_id
].txb
[idx
].skb
[0])
1137 return (struct ieee80211_hdr
*)priv
->txq
[txq_id
].
1138 txb
[idx
].skb
[0]->data
;
1143 static inline int iwl_is_associated(struct iwl_priv
*priv
)
1145 return (priv
->active_rxon
.filter_flags
& RXON_FILTER_ASSOC_MSK
) ? 1 : 0;
1148 static inline int is_channel_valid(const struct iwl_channel_info
*ch_info
)
1150 if (ch_info
== NULL
)
1152 return (ch_info
->flags
& EEPROM_CHANNEL_VALID
) ? 1 : 0;
1155 static inline int is_channel_radar(const struct iwl_channel_info
*ch_info
)
1157 return (ch_info
->flags
& EEPROM_CHANNEL_RADAR
) ? 1 : 0;
1160 static inline u8
is_channel_a_band(const struct iwl_channel_info
*ch_info
)
1162 return ch_info
->band
== IEEE80211_BAND_5GHZ
;
1165 static inline u8
is_channel_bg_band(const struct iwl_channel_info
*ch_info
)
1167 return ch_info
->band
== IEEE80211_BAND_2GHZ
;
1170 static inline int is_channel_passive(const struct iwl_channel_info
*ch
)
1172 return (!(ch
->flags
& EEPROM_CHANNEL_ACTIVE
)) ? 1 : 0;
1175 static inline int is_channel_ibss(const struct iwl_channel_info
*ch
)
1177 return ((ch
->flags
& EEPROM_CHANNEL_IBSS
)) ? 1 : 0;
1180 #endif /* __iwl_dev_h__ */