[mirror_ubuntu-bionic-kernel.git] / drivers / net / wireless / marvell / mwifiex / sta_ioctl.c

/*
 * Marvell Wireless LAN device driver: functions for station ioctl
 *
 * Copyright (C) 2011-2014, Marvell International Ltd.
 *
 * This software file (the "File") is distributed by Marvell International
 * Ltd. under the terms of the GNU General Public License Version 2, June 1991
 * (the "License").  You may use, redistribute and/or modify this File in
 * accordance with the terms and conditions of the License, a copy of which
 * is available by writing to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
 * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
 *
 * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
 * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
 * this warranty disclaimer.
 */

#include "decl.h"
#include "ioctl.h"
#include "util.h"
#include "fw.h"
#include "main.h"
#include "wmm.h"
#include "11n.h"
#include "cfg80211.h"

static int disconnect_on_suspend;
module_param(disconnect_on_suspend, int, 0644);

/*
 * Copies the multicast address list from device to driver.
 *
 * This function does not validate the destination memory for
 * size, and the calling function must ensure enough memory is
 * available.
 */
int mwifiex_copy_mcast_addr(struct mwifiex_multicast_list *mlist,
                            struct net_device *dev)
{
        int i = 0;
        struct netdev_hw_addr *ha;

        netdev_for_each_mc_addr(ha, dev)
                memcpy(&mlist->mac_list[i++], ha->addr, ETH_ALEN);

        return i;
}

/*
 * Wait queue completion handler.
 *
 * This function waits on a cmd wait queue. It also cancels the pending
 * request after waking up, in case of errors.
 */
int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter,
                                struct cmd_ctrl_node *cmd_queued)
{
        int status;

        /* Wait for completion */
        status = wait_event_interruptible_timeout(adapter->cmd_wait_q.wait,
                                                  *(cmd_queued->condition),
                                                  (12 * HZ));
        if (status <= 0) {
                if (status == 0)
                        status = -ETIMEDOUT;
                mwifiex_dbg(adapter, ERROR, "cmd_wait_q terminated: %d\n",
                            status);
                mwifiex_cancel_all_pending_cmd(adapter);
                return status;
        }

        status = adapter->cmd_wait_q.status;
        adapter->cmd_wait_q.status = 0;

        return status;
}

/*
 * This function prepares the correct firmware command and
 * issues it to set the multicast list.
 *
 * This function can be used to enable promiscuous mode, or enable all
 * multicast packets, or to enable selective multicast.
 */
int mwifiex_request_set_multicast_list(struct mwifiex_private *priv,
                                struct mwifiex_multicast_list *mcast_list)
{
        int ret = 0;
        u16 old_pkt_filter;

        old_pkt_filter = priv->curr_pkt_filter;

        if (mcast_list->mode == MWIFIEX_PROMISC_MODE) {
                mwifiex_dbg(priv->adapter, INFO,
                            "info: Enable Promiscuous mode\n");
                priv->curr_pkt_filter |= HostCmd_ACT_MAC_PROMISCUOUS_ENABLE;
                priv->curr_pkt_filter &=
                        ~HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
        } else {
                /* Multicast */
                priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_PROMISCUOUS_ENABLE;
                if (mcast_list->mode == MWIFIEX_ALL_MULTI_MODE) {
                        mwifiex_dbg(priv->adapter, INFO,
                                    "info: Enabling All Multicast!\n");
                        priv->curr_pkt_filter |=
                                HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
                } else {
                        priv->curr_pkt_filter &=
                                ~HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
                        mwifiex_dbg(priv->adapter, INFO,
                                    "info: Set multicast list=%d\n",
                                    mcast_list->num_multicast_addr);
                        /* Send multicast addresses to firmware */
                        ret = mwifiex_send_cmd(priv,
                                               HostCmd_CMD_MAC_MULTICAST_ADR,
                                               HostCmd_ACT_GEN_SET, 0,
                                               mcast_list, false);
                }
        }
        mwifiex_dbg(priv->adapter, INFO,
                    "info: old_pkt_filter=%#x, curr_pkt_filter=%#x\n",
                    old_pkt_filter, priv->curr_pkt_filter);
        if (old_pkt_filter != priv->curr_pkt_filter) {
                ret = mwifiex_send_cmd(priv, HostCmd_CMD_MAC_CONTROL,
                                       HostCmd_ACT_GEN_SET,
                                       0, &priv->curr_pkt_filter, false);
        }

        return ret;
}

/*
 * This function fills bss descriptor structure using provided
 * information.
 * beacon_ie buffer is allocated in this function. It is caller's
 * responsibility to free the memory.
 */
int mwifiex_fill_new_bss_desc(struct mwifiex_private *priv,
                              struct cfg80211_bss *bss,
                              struct mwifiex_bssdescriptor *bss_desc)
{
        u8 *beacon_ie;
        size_t beacon_ie_len;
        struct mwifiex_bss_priv *bss_priv = (void *)bss->priv;
        const struct cfg80211_bss_ies *ies;
        int ret;

        rcu_read_lock();
        ies = rcu_dereference(bss->ies);
        beacon_ie = kmemdup(ies->data, ies->len, GFP_ATOMIC);
        beacon_ie_len = ies->len;
        bss_desc->timestamp = ies->tsf;
        rcu_read_unlock();

        if (!beacon_ie) {
                mwifiex_dbg(priv->adapter, ERROR,
                            " failed to alloc beacon_ie\n");
                return -ENOMEM;
        }

        memcpy(bss_desc->mac_address, bss->bssid, ETH_ALEN);
        bss_desc->rssi = bss->signal;
        /* The caller of this function will free beacon_ie */
        bss_desc->beacon_buf = beacon_ie;
        bss_desc->beacon_buf_size = beacon_ie_len;
        bss_desc->beacon_period = bss->beacon_interval;
        bss_desc->cap_info_bitmap = bss->capability;
        bss_desc->bss_band = bss_priv->band;
        bss_desc->fw_tsf = bss_priv->fw_tsf;
        if (bss_desc->cap_info_bitmap & WLAN_CAPABILITY_PRIVACY) {
                mwifiex_dbg(priv->adapter, INFO,
                            "info: InterpretIE: AP WEP enabled\n");
                bss_desc->privacy = MWIFIEX_802_11_PRIV_FILTER_8021X_WEP;
        } else {
                bss_desc->privacy = MWIFIEX_802_11_PRIV_FILTER_ACCEPT_ALL;
        }
        if (bss_desc->cap_info_bitmap & WLAN_CAPABILITY_IBSS)
                bss_desc->bss_mode = NL80211_IFTYPE_ADHOC;
        else
                bss_desc->bss_mode = NL80211_IFTYPE_STATION;

        /* Disable 11ac by default. Enable it only where there
         * exist VHT_CAP IE in AP beacon
         */
        bss_desc->disable_11ac = true;

        if (bss_desc->cap_info_bitmap & WLAN_CAPABILITY_SPECTRUM_MGMT)
                bss_desc->sensed_11h = true;

        ret = mwifiex_update_bss_desc_with_ie(priv->adapter, bss_desc);
        if (ret)
                return ret;

        /* Update HT40 capability based on current channel information */
        if (bss_desc->bcn_ht_oper && bss_desc->bcn_ht_cap) {
                u8 ht_param = bss_desc->bcn_ht_oper->ht_param;
                u8 radio = mwifiex_band_to_radio_type(bss_desc->bss_band);
                struct ieee80211_supported_band *sband =
                                                priv->wdev.wiphy->bands[radio];
                int freq = ieee80211_channel_to_frequency(bss_desc->channel,
                                                          radio);
                struct ieee80211_channel *chan =
                        ieee80211_get_channel(priv->adapter->wiphy, freq);

                switch (ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
                case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
                        if (chan->flags & IEEE80211_CHAN_NO_HT40PLUS) {
                                sband->ht_cap.cap &=
                                        ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
                                sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SGI_40;
                        } else {
                                sband->ht_cap.cap |=
                                        IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
                                        IEEE80211_HT_CAP_SGI_40;
                        }
                        break;
                case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
                        if (chan->flags & IEEE80211_CHAN_NO_HT40MINUS) {
                                sband->ht_cap.cap &=
                                        ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
                                sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SGI_40;
                        } else {
                                sband->ht_cap.cap |=
                                        IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
                                        IEEE80211_HT_CAP_SGI_40;
                        }
                        break;
                }
        }

        return 0;
}

void mwifiex_dnld_txpwr_table(struct mwifiex_private *priv)
{
        if (priv->adapter->dt_node) {
                char txpwr[] = {"marvell,00_txpwrlimit"};

                memcpy(&txpwr[8], priv->adapter->country_code, 2);
                mwifiex_dnld_dt_cfgdata(priv, priv->adapter->dt_node, txpwr);
        }
}

static int mwifiex_process_country_ie(struct mwifiex_private *priv,
                                      struct cfg80211_bss *bss)
{
        const u8 *country_ie;
        u8 country_ie_len;
        struct mwifiex_802_11d_domain_reg *domain_info =
                                        &priv->adapter->domain_reg;

        rcu_read_lock();
        country_ie = ieee80211_bss_get_ie(bss, WLAN_EID_COUNTRY);
        if (!country_ie) {
                rcu_read_unlock();
                return 0;
        }

        country_ie_len = country_ie[1];
        if (country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN) {
                rcu_read_unlock();
                return 0;
        }

        if (!strncmp(priv->adapter->country_code, &country_ie[2], 2)) {
                rcu_read_unlock();
                mwifiex_dbg(priv->adapter, INFO,
                            "11D: skip setting domain info in FW\n");
                return 0;
        }
        memcpy(priv->adapter->country_code, &country_ie[2], 2);

        domain_info->country_code[0] = country_ie[2];
        domain_info->country_code[1] = country_ie[3];
        domain_info->country_code[2] = ' ';

        country_ie_len -= IEEE80211_COUNTRY_STRING_LEN;

        domain_info->no_of_triplet =
                country_ie_len / sizeof(struct ieee80211_country_ie_triplet);

        memcpy((u8 *)domain_info->triplet,
               &country_ie[2] + IEEE80211_COUNTRY_STRING_LEN, country_ie_len);

        rcu_read_unlock();

        if (mwifiex_send_cmd(priv, HostCmd_CMD_802_11D_DOMAIN_INFO,
                             HostCmd_ACT_GEN_SET, 0, NULL, false)) {
                mwifiex_dbg(priv->adapter, ERROR,
                            "11D: setting domain info in FW fail\n");
                return -1;
        }

        mwifiex_dnld_txpwr_table(priv);

        return 0;
}

/*
 * In Ad-Hoc mode, the IBSS is created if not found in scan list.
 * In both Ad-Hoc and infra mode, an deauthentication is performed
 * first.
 */
int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss,
                      struct cfg80211_ssid *req_ssid)
{
        int ret;
        struct mwifiex_adapter *adapter = priv->adapter;
        struct mwifiex_bssdescriptor *bss_desc = NULL;

        priv->scan_block = false;

        if (bss) {
                if (adapter->region_code == 0x00)
                        mwifiex_process_country_ie(priv, bss);

                /* Allocate and fill new bss descriptor */
                bss_desc = kzalloc(sizeof(struct mwifiex_bssdescriptor),
                                   GFP_KERNEL);
                if (!bss_desc)
                        return -ENOMEM;

                ret = mwifiex_fill_new_bss_desc(priv, bss, bss_desc);
                if (ret)
                        goto done;
        }

        if (priv->bss_mode == NL80211_IFTYPE_STATION ||
            priv->bss_mode == NL80211_IFTYPE_P2P_CLIENT) {
                u8 config_bands;

                if (!bss_desc)
                        return -1;

                if (mwifiex_band_to_radio_type(bss_desc->bss_band) ==
                                                HostCmd_SCAN_RADIO_TYPE_BG) {
                        config_bands = BAND_B | BAND_G | BAND_GN;
                } else {
                        config_bands = BAND_A | BAND_AN;
                        if (adapter->fw_bands & BAND_AAC)
                                config_bands |= BAND_AAC;
                }

                if (!((config_bands | adapter->fw_bands) & ~adapter->fw_bands))
                        adapter->config_bands = config_bands;

                ret = mwifiex_check_network_compatibility(priv, bss_desc);
                if (ret)
                        goto done;

                if (mwifiex_11h_get_csa_closed_channel(priv) ==
                                                        (u8)bss_desc->channel) {
                        mwifiex_dbg(adapter, ERROR,
                                    "Attempt to reconnect on csa closed chan(%d)\n",
                                    bss_desc->channel);
                        ret = -1;
                        goto done;
                }

                mwifiex_dbg(adapter, INFO,
                            "info: SSID found in scan list ...\t"
                            "associating...\n");

                mwifiex_stop_net_dev_queue(priv->netdev, adapter);
                if (netif_carrier_ok(priv->netdev))
                        netif_carrier_off(priv->netdev);

                /* Clear any past association response stored for
                 * application retrieval */
                priv->assoc_rsp_size = 0;
                ret = mwifiex_associate(priv, bss_desc);

                /* If auth type is auto and association fails using open mode,
                 * try to connect using shared mode */
                if (ret == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG &&
                    priv->sec_info.is_authtype_auto &&
                    priv->sec_info.wep_enabled) {
                        priv->sec_info.authentication_mode =
                                                NL80211_AUTHTYPE_SHARED_KEY;
                        ret = mwifiex_associate(priv, bss_desc);
                }

                if (bss)
                        cfg80211_put_bss(priv->adapter->wiphy, bss);
        } else {
                /* Adhoc mode */
                /* If the requested SSID matches current SSID, return */
                if (bss_desc && bss_desc->ssid.ssid_len &&
                    (!mwifiex_ssid_cmp(&priv->curr_bss_params.bss_descriptor.
                                       ssid, &bss_desc->ssid))) {
                        ret = 0;
                        goto done;
                }

                priv->adhoc_is_link_sensed = false;

                ret = mwifiex_check_network_compatibility(priv, bss_desc);

                mwifiex_stop_net_dev_queue(priv->netdev, adapter);
                if (netif_carrier_ok(priv->netdev))
                        netif_carrier_off(priv->netdev);

                if (!ret) {
                        mwifiex_dbg(adapter, INFO,
                                    "info: network found in scan\t"
                                    " list. Joining...\n");
                        ret = mwifiex_adhoc_join(priv, bss_desc);
                        if (bss)
                                cfg80211_put_bss(priv->adapter->wiphy, bss);
                } else {
                        mwifiex_dbg(adapter, INFO,
                                    "info: Network not found in\t"
                                    "the list, creating adhoc with ssid = %s\n",
                                    req_ssid->ssid);
                        ret = mwifiex_adhoc_start(priv, req_ssid);
                }
        }

done:
        /* beacon_ie buffer was allocated in function
         * mwifiex_fill_new_bss_desc(). Free it now.
         */
        if (bss_desc)
                kfree(bss_desc->beacon_buf);
        kfree(bss_desc);

        if (ret < 0)
                priv->attempted_bss_desc = NULL;

        return ret;
}

/*
 * IOCTL request handler to set host sleep configuration.
 *
 * This function prepares the correct firmware command and
 * issues it.
 */
int mwifiex_set_hs_params(struct mwifiex_private *priv, u16 action,
                          int cmd_type, struct mwifiex_ds_hs_cfg *hs_cfg)

{
        struct mwifiex_adapter *adapter = priv->adapter;
        int status = 0;
        u32 prev_cond = 0;

        if (!hs_cfg)
                return -ENOMEM;

        switch (action) {
        case HostCmd_ACT_GEN_SET:
                if (adapter->pps_uapsd_mode) {
                        mwifiex_dbg(adapter, INFO,
                                    "info: Host Sleep IOCTL\t"
                                    "is blocked in UAPSD/PPS mode\n");
                        status = -1;
                        break;
                }
                if (hs_cfg->is_invoke_hostcmd) {
                        if (hs_cfg->conditions == HS_CFG_CANCEL) {
                                if (!adapter->is_hs_configured)
                                        /* Already cancelled */
                                        break;
                                /* Save previous condition */
                                prev_cond = le32_to_cpu(adapter->hs_cfg
                                                        .conditions);
                                adapter->hs_cfg.conditions =
                                                cpu_to_le32(hs_cfg->conditions);
                        } else if (hs_cfg->conditions) {
                                adapter->hs_cfg.conditions =
                                                cpu_to_le32(hs_cfg->conditions);
                                adapter->hs_cfg.gpio = (u8)hs_cfg->gpio;
                                if (hs_cfg->gap)
                                        adapter->hs_cfg.gap = (u8)hs_cfg->gap;
                        } else if (adapter->hs_cfg.conditions ==
                                   cpu_to_le32(HS_CFG_CANCEL)) {
                                /* Return failure if no parameters for HS
                                   enable */
                                status = -1;
                                break;
                        }

                        status = mwifiex_send_cmd(priv,
                                                  HostCmd_CMD_802_11_HS_CFG_ENH,
                                                  HostCmd_ACT_GEN_SET, 0,
                                                  &adapter->hs_cfg,
                                                  cmd_type == MWIFIEX_SYNC_CMD);

                        if (hs_cfg->conditions == HS_CFG_CANCEL)
                                /* Restore previous condition */
                                adapter->hs_cfg.conditions =
                                                cpu_to_le32(prev_cond);
                } else {
                        adapter->hs_cfg.conditions =
                                                cpu_to_le32(hs_cfg->conditions);
                        adapter->hs_cfg.gpio = (u8)hs_cfg->gpio;
                        adapter->hs_cfg.gap = (u8)hs_cfg->gap;
                }
                break;
        case HostCmd_ACT_GEN_GET:
                hs_cfg->conditions = le32_to_cpu(adapter->hs_cfg.conditions);
                hs_cfg->gpio = adapter->hs_cfg.gpio;
                hs_cfg->gap = adapter->hs_cfg.gap;
                break;
        default:
                status = -1;
                break;
        }

        return status;
}

/*
 * Sends IOCTL request to cancel the existing Host Sleep configuration.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int mwifiex_cancel_hs(struct mwifiex_private *priv, int cmd_type)
{
        struct mwifiex_ds_hs_cfg hscfg;

        hscfg.conditions = HS_CFG_CANCEL;
        hscfg.is_invoke_hostcmd = true;

        return mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_SET,
                                    cmd_type, &hscfg);
}
EXPORT_SYMBOL_GPL(mwifiex_cancel_hs);

/*
 * Sends IOCTL request to cancel the existing Host Sleep configuration.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int mwifiex_enable_hs(struct mwifiex_adapter *adapter)
{
        struct mwifiex_ds_hs_cfg hscfg;
        struct mwifiex_private *priv;
        int i;

        if (disconnect_on_suspend) {
                for (i = 0; i < adapter->priv_num; i++) {
                        priv = adapter->priv[i];
                        if (priv)
                                mwifiex_deauthenticate(priv, NULL);
                }
        }

        priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA);

        if (priv && priv->sched_scanning) {
#ifdef CONFIG_PM
                if (priv->wdev.wiphy->wowlan_config &&
                    !priv->wdev.wiphy->wowlan_config->nd_config) {
#endif
                        mwifiex_dbg(adapter, CMD, "aborting bgscan!\n");
                        mwifiex_stop_bg_scan(priv);
                        cfg80211_sched_scan_stopped(priv->wdev.wiphy, 0);
#ifdef CONFIG_PM
                }
#endif
        }

        if (adapter->hs_activated) {
                mwifiex_dbg(adapter, CMD,
                            "cmd: HS Already activated\n");
                return true;
        }

        adapter->hs_activate_wait_q_woken = false;

        memset(&hscfg, 0, sizeof(hscfg));
        hscfg.is_invoke_hostcmd = true;

        adapter->hs_enabling = true;
        mwifiex_cancel_all_pending_cmd(adapter);

        if (mwifiex_set_hs_params(mwifiex_get_priv(adapter,
                                                   MWIFIEX_BSS_ROLE_STA),
                                  HostCmd_ACT_GEN_SET, MWIFIEX_SYNC_CMD,
                                  &hscfg)) {
                mwifiex_dbg(adapter, ERROR,
                            "IOCTL request HS enable failed\n");
                return false;
        }

        if (wait_event_interruptible_timeout(adapter->hs_activate_wait_q,
                                             adapter->hs_activate_wait_q_woken,
                                             (10 * HZ)) <= 0) {
                mwifiex_dbg(adapter, ERROR,
                            "hs_activate_wait_q terminated\n");
                return false;
        }

        return true;
}
EXPORT_SYMBOL_GPL(mwifiex_enable_hs);

/*
 * IOCTL request handler to get BSS information.
 *
 * This function collates the information from different driver structures
 * to send to the user.
 */
int mwifiex_get_bss_info(struct mwifiex_private *priv,
                         struct mwifiex_bss_info *info)
{
        struct mwifiex_adapter *adapter = priv->adapter;
        struct mwifiex_bssdescriptor *bss_desc;

        if (!info)
                return -1;

        bss_desc = &priv->curr_bss_params.bss_descriptor;

        info->bss_mode = priv->bss_mode;

        memcpy(&info->ssid, &bss_desc->ssid, sizeof(struct cfg80211_ssid));

        memcpy(&info->bssid, &bss_desc->mac_address, ETH_ALEN);

        info->bss_chan = bss_desc->channel;

        memcpy(info->country_code, adapter->country_code,
               IEEE80211_COUNTRY_STRING_LEN);

        info->media_connected = priv->media_connected;

        info->max_power_level = priv->max_tx_power_level;
        info->min_power_level = priv->min_tx_power_level;

        info->adhoc_state = priv->adhoc_state;

        info->bcn_nf_last = priv->bcn_nf_last;

        if (priv->sec_info.wep_enabled)
                info->wep_status = true;
        else
                info->wep_status = false;

        info->is_hs_configured = adapter->is_hs_configured;
        info->is_deep_sleep = adapter->is_deep_sleep;

        return 0;
}

/*
 * The function disables auto deep sleep mode.
 */
int mwifiex_disable_auto_ds(struct mwifiex_private *priv)
{
        struct mwifiex_ds_auto_ds auto_ds = {
                .auto_ds = DEEP_SLEEP_OFF,
        };

        return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
                                DIS_AUTO_PS, BITMAP_AUTO_DS, &auto_ds, true);
}
EXPORT_SYMBOL_GPL(mwifiex_disable_auto_ds);

/*
 * Sends IOCTL request to get the data rate.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int mwifiex_drv_get_data_rate(struct mwifiex_private *priv, u32 *rate)
{
        int ret;

        ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_TX_RATE_QUERY,
                               HostCmd_ACT_GEN_GET, 0, NULL, true);

        if (!ret) {
                if (priv->is_data_rate_auto)
                        *rate = mwifiex_index_to_data_rate(priv, priv->tx_rate,
                                                           priv->tx_htinfo);
                else
                        *rate = priv->data_rate;
        }

        return ret;
}

/*
 * IOCTL request handler to set tx power configuration.
 *
 * This function prepares the correct firmware command and
 * issues it.
 *
 * For non-auto power mode, all the following power groups are set -
 *      - Modulation class HR/DSSS
 *      - Modulation class OFDM
 *      - Modulation class HTBW20
 *      - Modulation class HTBW40
 */
int mwifiex_set_tx_power(struct mwifiex_private *priv,
                         struct mwifiex_power_cfg *power_cfg)
{
        int ret;
        struct host_cmd_ds_txpwr_cfg *txp_cfg;
        struct mwifiex_types_power_group *pg_tlv;
        struct mwifiex_power_group *pg;
        u8 *buf;
        u16 dbm = 0;

        if (!power_cfg->is_power_auto) {
                dbm = (u16) power_cfg->power_level;
                if ((dbm < priv->min_tx_power_level) ||
                    (dbm > priv->max_tx_power_level)) {
                        mwifiex_dbg(priv->adapter, ERROR,
                                    "txpower value %d dBm\t"
                                    "is out of range (%d dBm-%d dBm)\n",
                                    dbm, priv->min_tx_power_level,
                                    priv->max_tx_power_level);
                        return -1;
                }
        }
        buf = kzalloc(MWIFIEX_SIZE_OF_CMD_BUFFER, GFP_KERNEL);
        if (!buf)
                return -ENOMEM;

        txp_cfg = (struct host_cmd_ds_txpwr_cfg *) buf;
        txp_cfg->action = cpu_to_le16(HostCmd_ACT_GEN_SET);
        if (!power_cfg->is_power_auto) {
                txp_cfg->mode = cpu_to_le32(1);
                pg_tlv = (struct mwifiex_types_power_group *)
                         (buf + sizeof(struct host_cmd_ds_txpwr_cfg));
                pg_tlv->type = cpu_to_le16(TLV_TYPE_POWER_GROUP);
                pg_tlv->length =
                        cpu_to_le16(4 * sizeof(struct mwifiex_power_group));
                pg = (struct mwifiex_power_group *)
                     (buf + sizeof(struct host_cmd_ds_txpwr_cfg)
                      + sizeof(struct mwifiex_types_power_group));
                /* Power group for modulation class HR/DSSS */
                pg->first_rate_code = 0x00;
                pg->last_rate_code = 0x03;
                pg->modulation_class = MOD_CLASS_HR_DSSS;
                pg->power_step = 0;
                pg->power_min = (s8) dbm;
                pg->power_max = (s8) dbm;
                pg++;
                /* Power group for modulation class OFDM */
                pg->first_rate_code = 0x00;
                pg->last_rate_code = 0x07;
                pg->modulation_class = MOD_CLASS_OFDM;
                pg->power_step = 0;
                pg->power_min = (s8) dbm;
                pg->power_max = (s8) dbm;
                pg++;
                /* Power group for modulation class HTBW20 */
                pg->first_rate_code = 0x00;
                pg->last_rate_code = 0x20;
                pg->modulation_class = MOD_CLASS_HT;
                pg->power_step = 0;
                pg->power_min = (s8) dbm;
                pg->power_max = (s8) dbm;
                pg->ht_bandwidth = HT_BW_20;
                pg++;
                /* Power group for modulation class HTBW40 */
                pg->first_rate_code = 0x00;
                pg->last_rate_code = 0x20;
                pg->modulation_class = MOD_CLASS_HT;
                pg->power_step = 0;
                pg->power_min = (s8) dbm;
                pg->power_max = (s8) dbm;
                pg->ht_bandwidth = HT_BW_40;
        }
        ret = mwifiex_send_cmd(priv, HostCmd_CMD_TXPWR_CFG,
                               HostCmd_ACT_GEN_SET, 0, buf, true);

        kfree(buf);
        return ret;
}

/*
 * IOCTL request handler to get power save mode.
 *
 * This function prepares the correct firmware command and
 * issues it.
 */
int mwifiex_drv_set_power(struct mwifiex_private *priv, u32 *ps_mode)
{
        int ret;
        struct mwifiex_adapter *adapter = priv->adapter;
        u16 sub_cmd;

        if (*ps_mode)
                adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_PSP;
        else
                adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_CAM;
        sub_cmd = (*ps_mode) ? EN_AUTO_PS : DIS_AUTO_PS;
        ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
                               sub_cmd, BITMAP_STA_PS, NULL, true);
        if ((!ret) && (sub_cmd == DIS_AUTO_PS))
                ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
                                       GET_PS, 0, NULL, false);

        return ret;
}

/*
 * IOCTL request handler to set/reset WPA IE.
 *
 * The supplied WPA IE is treated as a opaque buffer. Only the first field
 * is checked to determine WPA version. If buffer length is zero, the existing
 * WPA IE is reset.
 */
static int mwifiex_set_wpa_ie(struct mwifiex_private *priv,
                              u8 *ie_data_ptr, u16 ie_len)
{
        if (ie_len) {
                if (ie_len > sizeof(priv->wpa_ie)) {
                        mwifiex_dbg(priv->adapter, ERROR,
                                    "failed to copy WPA IE, too big\n");
                        return -1;
                }
                memcpy(priv->wpa_ie, ie_data_ptr, ie_len);
                priv->wpa_ie_len = ie_len;
                mwifiex_dbg(priv->adapter, CMD,
                            "cmd: Set Wpa_ie_len=%d IE=%#x\n",
                            priv->wpa_ie_len, priv->wpa_ie[0]);

                if (priv->wpa_ie[0] == WLAN_EID_VENDOR_SPECIFIC) {
                        priv->sec_info.wpa_enabled = true;
                } else if (priv->wpa_ie[0] == WLAN_EID_RSN) {
                        priv->sec_info.wpa2_enabled = true;
                } else {
                        priv->sec_info.wpa_enabled = false;
                        priv->sec_info.wpa2_enabled = false;
                }
        } else {
                memset(priv->wpa_ie, 0, sizeof(priv->wpa_ie));
                priv->wpa_ie_len = 0;
                mwifiex_dbg(priv->adapter, INFO,
                            "info: reset wpa_ie_len=%d IE=%#x\n",
                            priv->wpa_ie_len, priv->wpa_ie[0]);
                priv->sec_info.wpa_enabled = false;
                priv->sec_info.wpa2_enabled = false;
        }

        return 0;
}

/*
 * IOCTL request handler to set/reset WAPI IE.
 *
 * The supplied WAPI IE is treated as a opaque buffer. Only the first field
 * is checked to internally enable WAPI. If buffer length is zero, the existing
 * WAPI IE is reset.
 */
static int mwifiex_set_wapi_ie(struct mwifiex_private *priv,
                               u8 *ie_data_ptr, u16 ie_len)
{
        if (ie_len) {
                if (ie_len > sizeof(priv->wapi_ie)) {
                        mwifiex_dbg(priv->adapter, ERROR,
                                    "info: failed to copy WAPI IE, too big\n");
                        return -1;
                }
                memcpy(priv->wapi_ie, ie_data_ptr, ie_len);
                priv->wapi_ie_len = ie_len;
                mwifiex_dbg(priv->adapter, CMD,
                            "cmd: Set wapi_ie_len=%d IE=%#x\n",
                            priv->wapi_ie_len, priv->wapi_ie[0]);

                if (priv->wapi_ie[0] == WLAN_EID_BSS_AC_ACCESS_DELAY)
                        priv->sec_info.wapi_enabled = true;
        } else {
                memset(priv->wapi_ie, 0, sizeof(priv->wapi_ie));
                priv->wapi_ie_len = ie_len;
                mwifiex_dbg(priv->adapter, INFO,
                            "info: Reset wapi_ie_len=%d IE=%#x\n",
                            priv->wapi_ie_len, priv->wapi_ie[0]);
                priv->sec_info.wapi_enabled = false;
        }
        return 0;
}

/*
 * IOCTL request handler to set/reset WPS IE.
 *
 * The supplied WPS IE is treated as a opaque buffer. Only the first field
 * is checked to internally enable WPS. If buffer length is zero, the existing
 * WPS IE is reset.
 */
static int mwifiex_set_wps_ie(struct mwifiex_private *priv,
                               u8 *ie_data_ptr, u16 ie_len)
{
        if (ie_len) {
                if (ie_len > MWIFIEX_MAX_VSIE_LEN) {
                        mwifiex_dbg(priv->adapter, ERROR,
                                    "info: failed to copy WPS IE, too big\n");
                        return -1;
                }

                priv->wps_ie = kzalloc(MWIFIEX_MAX_VSIE_LEN, GFP_KERNEL);
                if (!priv->wps_ie)
                        return -ENOMEM;

                memcpy(priv->wps_ie, ie_data_ptr, ie_len);
                priv->wps_ie_len = ie_len;
                mwifiex_dbg(priv->adapter, CMD,
                            "cmd: Set wps_ie_len=%d IE=%#x\n",
                            priv->wps_ie_len, priv->wps_ie[0]);
        } else {
                kfree(priv->wps_ie);
                priv->wps_ie_len = ie_len;
                mwifiex_dbg(priv->adapter, INFO,
                            "info: Reset wps_ie_len=%d\n", priv->wps_ie_len);
        }
        return 0;
}

/*
 * IOCTL request handler to set WAPI key.
 *
 * This function prepares the correct firmware command and
 * issues it.
 */
static int mwifiex_sec_ioctl_set_wapi_key(struct mwifiex_private *priv,
                               struct mwifiex_ds_encrypt_key *encrypt_key)
{

        return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
                                HostCmd_ACT_GEN_SET, KEY_INFO_ENABLED,
                                encrypt_key, true);
}

/*
 * IOCTL request handler to set WEP network key.
 *
 * This function prepares the correct firmware command and
 * issues it, after validation checks.
 */
static int mwifiex_sec_ioctl_set_wep_key(struct mwifiex_private *priv,
                              struct mwifiex_ds_encrypt_key *encrypt_key)
{
        struct mwifiex_adapter *adapter = priv->adapter;
        int ret;
        struct mwifiex_wep_key *wep_key;
        int index;

        if (priv->wep_key_curr_index >= NUM_WEP_KEYS)
                priv->wep_key_curr_index = 0;
        wep_key = &priv->wep_key[priv->wep_key_curr_index];
        index = encrypt_key->key_index;
        if (encrypt_key->key_disable) {
                priv->sec_info.wep_enabled = 0;
        } else if (!encrypt_key->key_len) {
                /* Copy the required key as the current key */
                wep_key = &priv->wep_key[index];
                if (!wep_key->key_length) {
                        mwifiex_dbg(adapter, ERROR,
                                    "key not set, so cannot enable it\n");
                        return -1;
                }

                if (adapter->key_api_major_ver == KEY_API_VER_MAJOR_V2) {
                        memcpy(encrypt_key->key_material,
                               wep_key->key_material, wep_key->key_length);
                        encrypt_key->key_len = wep_key->key_length;
                }

                priv->wep_key_curr_index = (u16) index;
                priv->sec_info.wep_enabled = 1;
        } else {
                wep_key = &priv->wep_key[index];
                memset(wep_key, 0, sizeof(struct mwifiex_wep_key));
                /* Copy the key in the driver */
                memcpy(wep_key->key_material,
                       encrypt_key->key_material,
                       encrypt_key->key_len);
                wep_key->key_index = index;
                wep_key->key_length = encrypt_key->key_len;
                priv->sec_info.wep_enabled = 1;
        }
        if (wep_key->key_length) {
                void *enc_key;

                if (encrypt_key->key_disable) {
                        memset(&priv->wep_key[index], 0,
                               sizeof(struct mwifiex_wep_key));
                        goto done;
                }

                if (adapter->key_api_major_ver == KEY_API_VER_MAJOR_V2)
                        enc_key = encrypt_key;
                else
                        enc_key = NULL;

                /* Send request to firmware */
                ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
                                       HostCmd_ACT_GEN_SET, 0, enc_key, false);
                if (ret)
                        return ret;
        }

done:
        if (priv->sec_info.wep_enabled)
                priv->curr_pkt_filter |= HostCmd_ACT_MAC_WEP_ENABLE;
        else
                priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_WEP_ENABLE;

        ret = mwifiex_send_cmd(priv, HostCmd_CMD_MAC_CONTROL,
                               HostCmd_ACT_GEN_SET, 0,
                               &priv->curr_pkt_filter, true);

        return ret;
}

/*
 * IOCTL request handler to set WPA key.
 *
 * This function prepares the correct firmware command and
 * issues it, after validation checks.
 *
 * Current driver only supports key length of up to 32 bytes.
 *
 * This function can also be used to disable a currently set key.
 */
static int mwifiex_sec_ioctl_set_wpa_key(struct mwifiex_private *priv,
                              struct mwifiex_ds_encrypt_key *encrypt_key)
{
        int ret;
        u8 remove_key = false;
        struct host_cmd_ds_802_11_key_material *ibss_key;

        /* Current driver only supports key length of up to 32 bytes */
        if (encrypt_key->key_len > WLAN_MAX_KEY_LEN) {
                mwifiex_dbg(priv->adapter, ERROR,
                            "key length too long\n");
                return -1;
        }

        if (priv->bss_mode == NL80211_IFTYPE_ADHOC) {
                /*
                 * IBSS/WPA-None uses only one key (Group) for both receiving
                 * and sending unicast and multicast packets.
                 */
                /* Send the key as PTK to firmware */
                encrypt_key->key_index = MWIFIEX_KEY_INDEX_UNICAST;
                ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
                                       HostCmd_ACT_GEN_SET,
                                       KEY_INFO_ENABLED, encrypt_key, false);
                if (ret)
                        return ret;

                ibss_key = &priv->aes_key;
                memset(ibss_key, 0,
                       sizeof(struct host_cmd_ds_802_11_key_material));
                /* Copy the key in the driver */
                memcpy(ibss_key->key_param_set.key, encrypt_key->key_material,
                       encrypt_key->key_len);
                memcpy(&ibss_key->key_param_set.key_len, &encrypt_key->key_len,
                       sizeof(ibss_key->key_param_set.key_len));
                ibss_key->key_param_set.key_type_id
                        = cpu_to_le16(KEY_TYPE_ID_TKIP);
                ibss_key->key_param_set.key_info = cpu_to_le16(KEY_ENABLED);

                /* Send the key as GTK to firmware */
                encrypt_key->key_index = ~MWIFIEX_KEY_INDEX_UNICAST;
        }

        if (!encrypt_key->key_index)
                encrypt_key->key_index = MWIFIEX_KEY_INDEX_UNICAST;

        if (remove_key)
                ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
                                       HostCmd_ACT_GEN_SET,
                                       !KEY_INFO_ENABLED, encrypt_key, true);
        else
                ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
                                       HostCmd_ACT_GEN_SET,
                                       KEY_INFO_ENABLED, encrypt_key, true);

        return ret;
}

/*
 * IOCTL request handler to set/get network keys.
 *
 * This is a generic key handling function which supports WEP, WPA
 * and WAPI.
 */
static int
mwifiex_sec_ioctl_encrypt_key(struct mwifiex_private *priv,
                              struct mwifiex_ds_encrypt_key *encrypt_key)
{
        int status;

        if (encrypt_key->is_wapi_key)
                status = mwifiex_sec_ioctl_set_wapi_key(priv, encrypt_key);
        else if (encrypt_key->key_len > WLAN_KEY_LEN_WEP104)
                status = mwifiex_sec_ioctl_set_wpa_key(priv, encrypt_key);
        else
                status = mwifiex_sec_ioctl_set_wep_key(priv, encrypt_key);
        return status;
}

/*
 * This function returns the driver version.
 */
int
mwifiex_drv_get_driver_version(struct mwifiex_adapter *adapter, char *version,
                               int max_len)
{
        union {
                __le32 l;
                u8 c[4];
        } ver;
        char fw_ver[32];

        ver.l = cpu_to_le32(adapter->fw_release_number);
        sprintf(fw_ver, "%u.%u.%u.p%u", ver.c[2], ver.c[1], ver.c[0], ver.c[3]);

        snprintf(version, max_len, driver_version, fw_ver);

        mwifiex_dbg(adapter, MSG, "info: MWIFIEX VERSION: %s\n", version);

        return 0;
}

/*
 * Sends IOCTL request to set encoding parameters.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int mwifiex_set_encode(struct mwifiex_private *priv, struct key_params *kp,
                       const u8 *key, int key_len, u8 key_index,
                       const u8 *mac_addr, int disable)
{
        struct mwifiex_ds_encrypt_key encrypt_key;

        memset(&encrypt_key, 0, sizeof(encrypt_key));
        encrypt_key.key_len = key_len;
        encrypt_key.key_index = key_index;

        if (kp && kp->cipher == WLAN_CIPHER_SUITE_AES_CMAC)
                encrypt_key.is_igtk_key = true;

        if (!disable) {
                if (key_len)
                        memcpy(encrypt_key.key_material, key, key_len);
                else
                        encrypt_key.is_current_wep_key = true;

                if (mac_addr)
                        memcpy(encrypt_key.mac_addr, mac_addr, ETH_ALEN);
                if (kp && kp->seq && kp->seq_len) {
                        memcpy(encrypt_key.pn, kp->seq, kp->seq_len);
                        encrypt_key.pn_len = kp->seq_len;
                        encrypt_key.is_rx_seq_valid = true;
                }
        } else {
                encrypt_key.key_disable = true;
                if (mac_addr)
                        memcpy(encrypt_key.mac_addr, mac_addr, ETH_ALEN);
        }

        return mwifiex_sec_ioctl_encrypt_key(priv, &encrypt_key);
}

/*
 * Sends IOCTL request to get extended version.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int
mwifiex_get_ver_ext(struct mwifiex_private *priv, u32 version_str_sel)
{
        struct mwifiex_ver_ext ver_ext;

        memset(&ver_ext, 0, sizeof(ver_ext));
        ver_ext.version_str_sel = version_str_sel;
        if (mwifiex_send_cmd(priv, HostCmd_CMD_VERSION_EXT,
                             HostCmd_ACT_GEN_GET, 0, &ver_ext, true))
                return -1;

        return 0;
}

int
mwifiex_remain_on_chan_cfg(struct mwifiex_private *priv, u16 action,
                           struct ieee80211_channel *chan,
                           unsigned int duration)
{
        struct host_cmd_ds_remain_on_chan roc_cfg;
        u8 sc;

        memset(&roc_cfg, 0, sizeof(roc_cfg));
        roc_cfg.action = cpu_to_le16(action);
        if (action == HostCmd_ACT_GEN_SET) {
                roc_cfg.band_cfg = chan->band;
                sc = mwifiex_chan_type_to_sec_chan_offset(NL80211_CHAN_NO_HT);
                roc_cfg.band_cfg |= (sc << 2);

                roc_cfg.channel =
                        ieee80211_frequency_to_channel(chan->center_freq);
                roc_cfg.duration = cpu_to_le32(duration);
        }
        if (mwifiex_send_cmd(priv, HostCmd_CMD_REMAIN_ON_CHAN,
                             action, 0, &roc_cfg, true)) {
                mwifiex_dbg(priv->adapter, ERROR,
                            "failed to remain on channel\n");
                return -1;
        }

        return roc_cfg.status;
}

/*
 * Sends IOCTL request to get statistics information.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int
mwifiex_get_stats_info(struct mwifiex_private *priv,
                       struct mwifiex_ds_get_stats *log)
{
        return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_GET_LOG,
                                HostCmd_ACT_GEN_GET, 0, log, true);
}

/*
 * IOCTL request handler to read/write register.
 *
 * This function prepares the correct firmware command and
 * issues it.
 *
 * Access to the following registers are supported -
 *      - MAC
 *      - BBP
 *      - RF
 *      - PMIC
 *      - CAU
 */
static int mwifiex_reg_mem_ioctl_reg_rw(struct mwifiex_private *priv,
                                        struct mwifiex_ds_reg_rw *reg_rw,
                                        u16 action)
{
        u16 cmd_no;

        switch (reg_rw->type) {
        case MWIFIEX_REG_MAC:
                cmd_no = HostCmd_CMD_MAC_REG_ACCESS;
                break;
        case MWIFIEX_REG_BBP:
                cmd_no = HostCmd_CMD_BBP_REG_ACCESS;
                break;
        case MWIFIEX_REG_RF:
                cmd_no = HostCmd_CMD_RF_REG_ACCESS;
                break;
        case MWIFIEX_REG_PMIC:
                cmd_no = HostCmd_CMD_PMIC_REG_ACCESS;
                break;
        case MWIFIEX_REG_CAU:
                cmd_no = HostCmd_CMD_CAU_REG_ACCESS;
                break;
        default:
                return -1;
        }

        return mwifiex_send_cmd(priv, cmd_no, action, 0, reg_rw, true);
}

/*
 * Sends IOCTL request to write to a register.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int
mwifiex_reg_write(struct mwifiex_private *priv, u32 reg_type,
                  u32 reg_offset, u32 reg_value)
{
        struct mwifiex_ds_reg_rw reg_rw;

        reg_rw.type = reg_type;
        reg_rw.offset = reg_offset;
        reg_rw.value = reg_value;

        return mwifiex_reg_mem_ioctl_reg_rw(priv, &reg_rw, HostCmd_ACT_GEN_SET);
}

/*
 * Sends IOCTL request to read from a register.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int
mwifiex_reg_read(struct mwifiex_private *priv, u32 reg_type,
                 u32 reg_offset, u32 *value)
{
        int ret;
        struct mwifiex_ds_reg_rw reg_rw;

        reg_rw.type = reg_type;
        reg_rw.offset = reg_offset;
        ret = mwifiex_reg_mem_ioctl_reg_rw(priv, &reg_rw, HostCmd_ACT_GEN_GET);

        if (ret)
                goto done;

        *value = reg_rw.value;

done:
        return ret;
}

/*
 * Sends IOCTL request to read from EEPROM.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int
mwifiex_eeprom_read(struct mwifiex_private *priv, u16 offset, u16 bytes,
                    u8 *value)
{
        int ret;
        struct mwifiex_ds_read_eeprom rd_eeprom;

        rd_eeprom.offset =  offset;
        rd_eeprom.byte_count = bytes;

        /* Send request to firmware */
        ret = mwifiex_send_cmd(priv, HostCmd_CMD_802_11_EEPROM_ACCESS,
                               HostCmd_ACT_GEN_GET, 0, &rd_eeprom, true);

        if (!ret)
                memcpy(value, rd_eeprom.value, min((u16)MAX_EEPROM_DATA,
                       rd_eeprom.byte_count));
        return ret;
}

/*
 * This function sets a generic IE. In addition to generic IE, it can
 * also handle WPA, WPA2 and WAPI IEs.
 */
static int
mwifiex_set_gen_ie_helper(struct mwifiex_private *priv, u8 *ie_data_ptr,
                          u16 ie_len)
{
        struct ieee_types_vendor_header *pvendor_ie;
        const u8 wpa_oui[] = { 0x00, 0x50, 0xf2, 0x01 };
        const u8 wps_oui[] = { 0x00, 0x50, 0xf2, 0x04 };
        u16 unparsed_len = ie_len, cur_ie_len;

        /* If the passed length is zero, reset the buffer */
        if (!ie_len) {
                priv->gen_ie_buf_len = 0;
                priv->wps.session_enable = false;
                return 0;
        } else if (!ie_data_ptr ||
                   ie_len <= sizeof(struct ieee_types_header)) {
                return -1;
        }
        pvendor_ie = (struct ieee_types_vendor_header *) ie_data_ptr;

        while (pvendor_ie) {
                cur_ie_len = pvendor_ie->len + sizeof(struct ieee_types_header);

                if (pvendor_ie->element_id == WLAN_EID_RSN) {
                        /* IE is a WPA/WPA2 IE so call set_wpa function */
                        mwifiex_set_wpa_ie(priv, (u8 *)pvendor_ie, cur_ie_len);
                        priv->wps.session_enable = false;
                        goto next_ie;
                }

                if (pvendor_ie->element_id == WLAN_EID_BSS_AC_ACCESS_DELAY) {
                        /* IE is a WAPI IE so call set_wapi function */
                        mwifiex_set_wapi_ie(priv, (u8 *)pvendor_ie,
                                            cur_ie_len);
                        goto next_ie;
                }

                if (pvendor_ie->element_id == WLAN_EID_VENDOR_SPECIFIC) {
                        /* Test to see if it is a WPA IE, if not, then
                         * it is a gen IE
                         */
                        if (!memcmp(pvendor_ie->oui, wpa_oui,
                                    sizeof(wpa_oui))) {
                                /* IE is a WPA/WPA2 IE so call set_wpa function
                                 */
                                mwifiex_set_wpa_ie(priv, (u8 *)pvendor_ie,
                                                   cur_ie_len);
                                priv->wps.session_enable = false;
                                goto next_ie;
                        }

                        if (!memcmp(pvendor_ie->oui, wps_oui,
                                    sizeof(wps_oui))) {
                                /* Test to see if it is a WPS IE,
                                 * if so, enable wps session flag
                                 */
                                priv->wps.session_enable = true;
                                mwifiex_dbg(priv->adapter, MSG,
                                            "WPS Session Enabled.\n");
                                mwifiex_set_wps_ie(priv, (u8 *)pvendor_ie,
                                                   cur_ie_len);
                                goto next_ie;
                        }
                }

                /* Saved in gen_ie, such as P2P IE.etc.*/

                /* Verify that the passed length is not larger than the
                 * available space remaining in the buffer
                 */
                if (cur_ie_len <
                    (sizeof(priv->gen_ie_buf) - priv->gen_ie_buf_len)) {
                        /* Append the passed data to the end
                         * of the genIeBuffer
                         */
                        memcpy(priv->gen_ie_buf + priv->gen_ie_buf_len,
                               (u8 *)pvendor_ie, cur_ie_len);
                        /* Increment the stored buffer length by the
                         * size passed
                         */
                        priv->gen_ie_buf_len += cur_ie_len;
                }

next_ie:
                unparsed_len -= cur_ie_len;

                if (unparsed_len <= sizeof(struct ieee_types_header))
                        pvendor_ie = NULL;
                else
                        pvendor_ie = (struct ieee_types_vendor_header *)
                                (((u8 *)pvendor_ie) + cur_ie_len);
        }

        return 0;
}

/*
 * IOCTL request handler to set/get generic IE.
 *
 * In addition to various generic IEs, this function can also be
 * used to set the ARP filter.
 */
static int mwifiex_misc_ioctl_gen_ie(struct mwifiex_private *priv,
                                     struct mwifiex_ds_misc_gen_ie *gen_ie,
                                     u16 action)
{
        struct mwifiex_adapter *adapter = priv->adapter;

        switch (gen_ie->type) {
        case MWIFIEX_IE_TYPE_GEN_IE:
                if (action == HostCmd_ACT_GEN_GET) {
                        gen_ie->len = priv->wpa_ie_len;
                        memcpy(gen_ie->ie_data, priv->wpa_ie, gen_ie->len);
                } else {
                        mwifiex_set_gen_ie_helper(priv, gen_ie->ie_data,
                                                  (u16) gen_ie->len);
                }
                break;
        case MWIFIEX_IE_TYPE_ARP_FILTER:
                memset(adapter->arp_filter, 0, sizeof(adapter->arp_filter));
                if (gen_ie->len > ARP_FILTER_MAX_BUF_SIZE) {
                        adapter->arp_filter_size = 0;
                        mwifiex_dbg(adapter, ERROR,
                                    "invalid ARP filter size\n");
                        return -1;
                } else {
                        memcpy(adapter->arp_filter, gen_ie->ie_data,
                               gen_ie->len);
                        adapter->arp_filter_size = gen_ie->len;
                }
                break;
        default:
                mwifiex_dbg(adapter, ERROR, "invalid IE type\n");
                return -1;
        }
        return 0;
}

/*
 * Sends IOCTL request to set a generic IE.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int
mwifiex_set_gen_ie(struct mwifiex_private *priv, const u8 *ie, int ie_len)
{
        struct mwifiex_ds_misc_gen_ie gen_ie;

        if (ie_len > IEEE_MAX_IE_SIZE)
                return -EFAULT;

        gen_ie.type = MWIFIEX_IE_TYPE_GEN_IE;
        gen_ie.len = ie_len;
        memcpy(gen_ie.ie_data, ie, ie_len);
        if (mwifiex_misc_ioctl_gen_ie(priv, &gen_ie, HostCmd_ACT_GEN_SET))
                return -EFAULT;

        return 0;
}

/* This function get Host Sleep wake up reason.
 *
 */
int mwifiex_get_wakeup_reason(struct mwifiex_private *priv, u16 action,
                              int cmd_type,
                              struct mwifiex_ds_wakeup_reason *wakeup_reason)
{
        int status = 0;

        status = mwifiex_send_cmd(priv, HostCmd_CMD_HS_WAKEUP_REASON,
                                  HostCmd_ACT_GEN_GET, 0, wakeup_reason,
                                  cmd_type == MWIFIEX_SYNC_CMD);

        return status;
}