drivers/net/wireless/orinoco/orinoco_cs.c

   1 /* orinoco_cs.c (formerly known as dldwd_cs.c)
   2  *
   3  * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
   4  * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
   5  * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others).
   6  * It should also be usable on various Prism II based cards such as the
   7  * Linksys, D-Link and Farallon Skyline. It should also work on Symbol
   8  * cards such as the 3Com AirConnect and Ericsson WLAN.
   9  *
  10  * Copyright notice & release notes in file main.c
  11  */
  12
  13 #define DRIVER_NAME "orinoco_cs"
  14 #define PFX DRIVER_NAME ": "
  15
  16 #include <linux/module.h>
  17 #include <linux/kernel.h>
  18 #include <linux/init.h>
  19 #include <linux/delay.h>
  20 #include <pcmcia/cs.h>
  21 #include <pcmcia/cistpl.h>
  22 #include <pcmcia/cisreg.h>
  23 #include <pcmcia/ds.h>
  24
  25 #include "orinoco.h"
  26
  27 /********************************************************************/
  28 /* Module stuff                                                     */
  29 /********************************************************************/
  30
  31 MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
  32 MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco,"
  33                    " Prism II based and similar wireless cards");
  34 MODULE_LICENSE("Dual MPL/GPL");
  35
  36 /* Module parameters */
  37
  38 /* Some D-Link cards have buggy CIS. They do work at 5v properly, but
  39  * don't have any CIS entry for it. This workaround it... */
  40 static int ignore_cis_vcc; /* = 0 */
  41 module_param(ignore_cis_vcc, int, 0);
  42 MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
  43
  44 /********************************************************************/
  45 /* Data structures                                                  */
  46 /********************************************************************/
  47
  48 /* PCMCIA specific device information (goes in the card field of
  49  * struct orinoco_private */
  50 struct orinoco_pccard {
  51         struct pcmcia_device    *p_dev;
  52
  53         /* Used to handle hard reset */
  54         /* yuck, we need this hack to work around the insanity of the
  55          * PCMCIA layer */
  56         unsigned long hard_reset_in_progress;
  57 };
  58
  59
  60 /********************************************************************/
  61 /* Function prototypes                                              */
  62 /********************************************************************/
  63
  64 static int orinoco_cs_config(struct pcmcia_device *link);
  65 static void orinoco_cs_release(struct pcmcia_device *link);
  66 static void orinoco_cs_detach(struct pcmcia_device *p_dev);
  67
  68 /********************************************************************/
  69 /* Device methods                                                   */
  70 /********************************************************************/
  71
  72 static int
  73 orinoco_cs_hard_reset(struct orinoco_private *priv)
  74 {
  75         struct orinoco_pccard *card = priv->card;
  76         struct pcmcia_device *link = card->p_dev;
  77         int err;
  78
  79         /* We need atomic ops here, because we're not holding the lock */
  80         set_bit(0, &card->hard_reset_in_progress);
  81
  82         err = pcmcia_reset_card(link->socket);
  83         if (err)
  84                 return err;
  85
  86         msleep(100);
  87         clear_bit(0, &card->hard_reset_in_progress);
  88
  89         return 0;
  90 }
  91
  92 /********************************************************************/
  93 /* PCMCIA stuff                                                     */
  94 /********************************************************************/
  95
  96 /*
  97  * This creates an "instance" of the driver, allocating local data
  98  * structures for one device.  The device is registered with Card
  99  * Services.
 100  *
 101  * The dev_link structure is initialized, but we don't actually
 102  * configure the card at this point -- we wait until we receive a card
 103  * insertion event.  */
 104 static int
 105 orinoco_cs_probe(struct pcmcia_device *link)
 106 {
 107         struct orinoco_private *priv;
 108         struct orinoco_pccard *card;
 109
 110         priv = alloc_orinocodev(sizeof(*card), &link->dev,
 111                                 orinoco_cs_hard_reset, NULL);
 112         if (!priv)
 113                 return -ENOMEM;
 114         card = priv->card;
 115
 116         /* Link both structures together */
 117         card->p_dev = link;
 118         link->priv = priv;
 119
 120         /* General socket configuration defaults can go here.  In this
 121          * client, we assume very little, and rely on the CIS for
 122          * almost everything.  In most clients, many details (i.e.,
 123          * number, sizes, and attributes of IO windows) are fixed by
 124          * the nature of the device, and can be hard-wired here. */
 125         link->conf.Attributes = 0;
 126         link->conf.IntType = INT_MEMORY_AND_IO;
 127
 128         return orinoco_cs_config(link);
 129 }                               /* orinoco_cs_attach */
 130
 131 /*
 132  * This deletes a driver "instance".  The device is de-registered with
 133  * Card Services.  If it has been released, all local data structures
 134  * are freed.  Otherwise, the structures will be freed when the device
 135  * is released.
 136  */
 137 static void orinoco_cs_detach(struct pcmcia_device *link)
 138 {
 139         struct orinoco_private *priv = link->priv;
 140
 141         orinoco_if_del(priv);
 142
 143         orinoco_cs_release(link);
 144
 145         free_orinocodev(priv);
 146 }                               /* orinoco_cs_detach */
 147
 148 /*
 149  * orinoco_cs_config() is scheduled to run after a CARD_INSERTION
 150  * event is received, to configure the PCMCIA socket, and to make the
 151  * device available to the system.
 152  */
 153
 154 static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
 155                                    cistpl_cftable_entry_t *cfg,
 156                                    cistpl_cftable_entry_t *dflt,
 157                                    unsigned int vcc,
 158                                    void *priv_data)
 159 {
 160         if (cfg->index == 0)
 161                 goto next_entry;
 162
 163         /* Use power settings for Vcc and Vpp if present */
 164         /* Note that the CIS values need to be rescaled */
 165         if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
 166                 if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
 167                         DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n",
 168                               __func__, vcc,
 169                               cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
 170                         if (!ignore_cis_vcc)
 171                                 goto next_entry;
 172                 }
 173         } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
 174                 if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
 175                         DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n",
 176                               __func__, vcc,
 177                               dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
 178                         if (!ignore_cis_vcc)
 179                                 goto next_entry;
 180                 }
 181         }
 182
 183         if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
 184                 p_dev->conf.Vpp =
 185                         cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 186         else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
 187                 p_dev->conf.Vpp =
 188                         dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 189
 190         /* Do we need to allocate an interrupt? */
 191         p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 192
 193         /* IO window settings */
 194         p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 195         if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 196                 cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 197                 p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
 198                 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
 199                 p_dev->resource[0]->flags |=
 200                         pcmcia_io_cfg_data_width(io->flags);
 201                 p_dev->resource[0]->start = io->win[0].base;
 202                 p_dev->resource[0]->end = io->win[0].len;
 203                 if (io->nwin > 1) {
 204                         p_dev->resource[1]->flags = p_dev->resource[0]->flags;
 205                         p_dev->resource[1]->start = io->win[1].base;
 206                         p_dev->resource[1]->end = io->win[1].len;
 207                 }
 208
 209                 /* This reserves IO space but doesn't actually enable it */
 210                 if (pcmcia_request_io(p_dev) != 0)
 211                         goto next_entry;
 212         }
 213         return 0;
 214
 215 next_entry:
 216         pcmcia_disable_device(p_dev);
 217         return -ENODEV;
 218 };
 219
 220 static int
 221 orinoco_cs_config(struct pcmcia_device *link)
 222 {
 223         struct orinoco_private *priv = link->priv;
 224         hermes_t *hw = &priv->hw;
 225         int ret;
 226         void __iomem *mem;
 227
 228         /*
 229          * In this loop, we scan the CIS for configuration table
 230          * entries, each of which describes a valid card
 231          * configuration, including voltage, IO window, memory window,
 232          * and interrupt settings.
 233          *
 234          * We make no assumptions about the card to be configured: we
 235          * use just the information available in the CIS.  In an ideal
 236          * world, this would work for any PCMCIA card, but it requires
 237          * a complete and accurate CIS.  In practice, a driver usually
 238          * "knows" most of these things without consulting the CIS,
 239          * and most client drivers will only use the CIS to fill in
 240          * implementation-defined details.
 241          */
 242         ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
 243         if (ret) {
 244                 if (!ignore_cis_vcc)
 245                         printk(KERN_ERR PFX "GetNextTuple(): No matching "
 246                                "CIS configuration.  Maybe you need the "
 247                                "ignore_cis_vcc=1 parameter.\n");
 248                 goto failed;
 249         }
 250
 251         ret = pcmcia_request_irq(link, orinoco_interrupt);
 252         if (ret)
 253                 goto failed;
 254
 255         /* We initialize the hermes structure before completing PCMCIA
 256          * configuration just in case the interrupt handler gets
 257          * called. */
 258         mem = ioport_map(link->resource[0]->start,
 259                         resource_size(link->resource[0]));
 260         if (!mem)
 261                 goto failed;
 262
 263         hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
 264
 265         /*
 266          * This actually configures the PCMCIA socket -- setting up
 267          * the I/O windows and the interrupt mapping, and putting the
 268          * card and host interface into "Memory and IO" mode.
 269          */
 270         ret = pcmcia_request_configuration(link, &link->conf);
 271         if (ret)
 272                 goto failed;
 273
 274         /* Initialise the main driver */
 275         if (orinoco_init(priv) != 0) {
 276                 printk(KERN_ERR PFX "orinoco_init() failed\n");
 277                 goto failed;
 278         }
 279
 280         /* Register an interface with the stack */
 281         if (orinoco_if_add(priv, link->resource[0]->start,
 282                            link->irq, NULL) != 0) {
 283                 printk(KERN_ERR PFX "orinoco_if_add() failed\n");
 284                 goto failed;
 285         }
 286
 287         return 0;
 288
 289  failed:
 290         orinoco_cs_release(link);
 291         return -ENODEV;
 292 }                               /* orinoco_cs_config */
 293
 294 /*
 295  * After a card is removed, orinoco_cs_release() will unregister the
 296  * device, and release the PCMCIA configuration.  If the device is
 297  * still open, this will be postponed until it is closed.
 298  */
 299 static void
 300 orinoco_cs_release(struct pcmcia_device *link)
 301 {
 302         struct orinoco_private *priv = link->priv;
 303         unsigned long flags;
 304
 305         /* We're committed to taking the device away now, so mark the
 306          * hardware as unavailable */
 307         priv->hw.ops->lock_irqsave(&priv->lock, &flags);
 308         priv->hw_unavailable++;
 309         priv->hw.ops->unlock_irqrestore(&priv->lock, &flags);
 310
 311         pcmcia_disable_device(link);
 312         if (priv->hw.iobase)
 313                 ioport_unmap(priv->hw.iobase);
 314 }                               /* orinoco_cs_release */
 315
 316 static int orinoco_cs_suspend(struct pcmcia_device *link)
 317 {
 318         struct orinoco_private *priv = link->priv;
 319         struct orinoco_pccard *card = priv->card;
 320
 321         /* This is probably racy, but I can't think of
 322            a better way, short of rewriting the PCMCIA
 323            layer to not suck :-( */
 324         if (!test_bit(0, &card->hard_reset_in_progress))
 325                 orinoco_down(priv);
 326
 327         return 0;
 328 }
 329
 330 static int orinoco_cs_resume(struct pcmcia_device *link)
 331 {
 332         struct orinoco_private *priv = link->priv;
 333         struct orinoco_pccard *card = priv->card;
 334         int err = 0;
 335
 336         if (!test_bit(0, &card->hard_reset_in_progress))
 337                 err = orinoco_up(priv);
 338
 339         return err;
 340 }
 341
 342
 343 /********************************************************************/
 344 /* Module initialization                                            */
 345 /********************************************************************/
 346
 347 /* Can't be declared "const" or the whole __initdata section will
 348  * become const */
 349 static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
 350         " (David Gibson <hermes@gibson.dropbear.id.au>, "
 351         "Pavel Roskin <proski@gnu.org>, et al)";
 352
 353 static struct pcmcia_device_id orinoco_cs_ids[] = {
 354         PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
 355         PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */
 356         PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
 357         PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
 358         PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
 359         PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
 360         PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0003), /* ARtem Onair Comcard 11 */
 361         PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
 362         PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
 363         PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
 364         PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */
 365         PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
 366         PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
 367         PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
 368         PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
 369         PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
 370         PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
 371         PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
 372         PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
 373         PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
 374         PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
 375         PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
 376         PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
 377         PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
 378         PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
 379         PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
 380         PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
 381         PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
 382         PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
 383         PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
 384         PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
 385         PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
 386         PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
 387         PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
 388 #ifdef CONFIG_HERMES_PRISM
 389         /* Only entries that certainly identify Prism chipset */
 390         PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
 391         PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
 392         PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
 393         PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
 394         PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
 395         PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
 396         PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
 397         PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
 398         PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
 399         PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
 400         PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
 401         PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
 402         PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
 403         PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
 404         PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
 405         PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
 406         PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
 407         PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
 408         PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
 409         PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
 410         PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
 411         PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
 412         PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
 413         PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
 414         PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
 415         PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
 416         PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
 417         PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
 418         PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
 419         PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
 420         PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
 421         PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
 422         PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
 423         PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
 424         PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
 425         PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
 426         PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
 427         PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
 428         PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
 429         PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
 430         PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
 431         PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
 432         PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
 433         PCMCIA_DEVICE_PROD_ID3("HFA3863", 0x355cb092),
 434         PCMCIA_DEVICE_PROD_ID3("ISL37100P", 0x630d52b2),
 435         PCMCIA_DEVICE_PROD_ID3("ISL37101P-10", 0xdd97a26b),
 436         PCMCIA_DEVICE_PROD_ID3("ISL37300P", 0xc9049a39),
 437 #endif
 438         PCMCIA_DEVICE_NULL,
 439 };
 440 MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);
 441
 442 static struct pcmcia_driver orinoco_driver = {
 443         .owner          = THIS_MODULE,
 444         .drv            = {
 445                 .name   = DRIVER_NAME,
 446         },
 447         .probe          = orinoco_cs_probe,
 448         .remove         = orinoco_cs_detach,
 449         .id_table       = orinoco_cs_ids,
 450         .suspend        = orinoco_cs_suspend,
 451         .resume         = orinoco_cs_resume,
 452 };
 453
 454 static int __init
 455 init_orinoco_cs(void)
 456 {
 457         printk(KERN_DEBUG "%s\n", version);
 458
 459         return pcmcia_register_driver(&orinoco_driver);
 460 }
 461
 462 static void __exit
 463 exit_orinoco_cs(void)
 464 {
 465         pcmcia_unregister_driver(&orinoco_driver);
 466 }
 467
 468 module_init(init_orinoco_cs);
 469 module_exit(exit_orinoco_cs);