1 /* orinoco_cs.c (formerly known as dldwd_cs.c)
3 * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
4 * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
5 * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others).
6 * It should also be usable on various Prism II based cards such as the
7 * Linksys, D-Link and Farallon Skyline. It should also work on Symbol
8 * cards such as the 3Com AirConnect and Ericsson WLAN.
10 * Copyright notice & release notes in file orinoco.c
13 #define DRIVER_NAME "orinoco_cs"
14 #define PFX DRIVER_NAME ": "
16 #include <linux/config.h>
17 #include <linux/module.h>
18 #include <linux/kernel.h>
19 #include <linux/init.h>
20 #include <linux/delay.h>
21 #include <pcmcia/cs_types.h>
22 #include <pcmcia/cs.h>
23 #include <pcmcia/cistpl.h>
24 #include <pcmcia/cisreg.h>
25 #include <pcmcia/ds.h>
29 /********************************************************************/
31 /********************************************************************/
33 MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
34 MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards");
35 MODULE_LICENSE("Dual MPL/GPL");
37 /* Module parameters */
39 /* Some D-Link cards have buggy CIS. They do work at 5v properly, but
40 * don't have any CIS entry for it. This workaround it... */
41 static int ignore_cis_vcc
; /* = 0 */
42 module_param(ignore_cis_vcc
, int, 0);
43 MODULE_PARM_DESC(ignore_cis_vcc
, "Allow voltage mismatch between card and socket");
45 /********************************************************************/
47 /********************************************************************/
49 /* PCMCIA specific device information (goes in the card field of
50 * struct orinoco_private */
51 struct orinoco_pccard
{
55 /* Used to handle hard reset */
56 /* yuck, we need this hack to work around the insanity of the
58 unsigned long hard_reset_in_progress
;
62 /********************************************************************/
63 /* Function prototypes */
64 /********************************************************************/
66 static void orinoco_cs_config(dev_link_t
*link
);
67 static void orinoco_cs_release(dev_link_t
*link
);
68 static void orinoco_cs_detach(struct pcmcia_device
*p_dev
);
70 /********************************************************************/
72 /********************************************************************/
75 orinoco_cs_hard_reset(struct orinoco_private
*priv
)
77 struct orinoco_pccard
*card
= priv
->card
;
78 dev_link_t
*link
= &card
->link
;
81 /* We need atomic ops here, because we're not holding the lock */
82 set_bit(0, &card
->hard_reset_in_progress
);
84 err
= pcmcia_reset_card(link
->handle
, NULL
);
89 clear_bit(0, &card
->hard_reset_in_progress
);
94 /********************************************************************/
96 /********************************************************************/
99 * This creates an "instance" of the driver, allocating local data
100 * structures for one device. The device is registered with Card
103 * The dev_link structure is initialized, but we don't actually
104 * configure the card at this point -- we wait until we receive a card
105 * insertion event. */
107 orinoco_cs_attach(struct pcmcia_device
*p_dev
)
109 struct net_device
*dev
;
110 struct orinoco_private
*priv
;
111 struct orinoco_pccard
*card
;
114 dev
= alloc_orinocodev(sizeof(*card
), orinoco_cs_hard_reset
);
117 priv
= netdev_priv(dev
);
120 /* Link both structures together */
124 /* Interrupt setup */
125 link
->irq
.Attributes
= IRQ_TYPE_EXCLUSIVE
| IRQ_HANDLE_PRESENT
;
126 link
->irq
.IRQInfo1
= IRQ_LEVEL_ID
;
127 link
->irq
.Handler
= orinoco_interrupt
;
128 link
->irq
.Instance
= dev
;
130 /* General socket configuration defaults can go here. In this
131 * client, we assume very little, and rely on the CIS for
132 * almost everything. In most clients, many details (i.e.,
133 * number, sizes, and attributes of IO windows) are fixed by
134 * the nature of the device, and can be hard-wired here. */
135 link
->conf
.Attributes
= 0;
136 link
->conf
.IntType
= INT_MEMORY_AND_IO
;
138 /* Register with Card Services */
141 link
->handle
= p_dev
;
142 p_dev
->instance
= link
;
144 link
->state
|= DEV_PRESENT
| DEV_CONFIG_PENDING
;
145 orinoco_cs_config(link
);
148 } /* orinoco_cs_attach */
151 * This deletes a driver "instance". The device is de-registered with
152 * Card Services. If it has been released, all local data structures
153 * are freed. Otherwise, the structures will be freed when the device
156 static void orinoco_cs_detach(struct pcmcia_device
*p_dev
)
158 dev_link_t
*link
= dev_to_instance(p_dev
);
159 struct net_device
*dev
= link
->priv
;
161 if (link
->state
& DEV_CONFIG
)
162 orinoco_cs_release(link
);
164 DEBUG(0, PFX
"detach: link=%p link->dev=%p\n", link
, link
->dev
);
166 DEBUG(0, PFX
"About to unregister net device %p\n",
168 unregister_netdev(dev
);
170 free_orinocodev(dev
);
171 } /* orinoco_cs_detach */
174 * orinoco_cs_config() is scheduled to run after a CARD_INSERTION
175 * event is received, to configure the PCMCIA socket, and to make the
176 * device available to the system.
179 #define CS_CHECK(fn, ret) do { \
180 last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
184 orinoco_cs_config(dev_link_t
*link
)
186 struct net_device
*dev
= link
->priv
;
187 client_handle_t handle
= link
->handle
;
188 struct orinoco_private
*priv
= netdev_priv(dev
);
189 struct orinoco_pccard
*card
= priv
->card
;
190 hermes_t
*hw
= &priv
->hw
;
191 int last_fn
, last_ret
;
199 CS_CHECK(ValidateCIS
, pcmcia_validate_cis(handle
, &info
));
202 * This reads the card's CONFIG tuple to find its
203 * configuration registers.
205 tuple
.DesiredTuple
= CISTPL_CONFIG
;
206 tuple
.Attributes
= 0;
207 tuple
.TupleData
= buf
;
208 tuple
.TupleDataMax
= sizeof(buf
);
209 tuple
.TupleOffset
= 0;
210 CS_CHECK(GetFirstTuple
, pcmcia_get_first_tuple(handle
, &tuple
));
211 CS_CHECK(GetTupleData
, pcmcia_get_tuple_data(handle
, &tuple
));
212 CS_CHECK(ParseTuple
, pcmcia_parse_tuple(handle
, &tuple
, &parse
));
213 link
->conf
.ConfigBase
= parse
.config
.base
;
214 link
->conf
.Present
= parse
.config
.rmask
[0];
217 link
->state
|= DEV_CONFIG
;
219 /* Look up the current Vcc */
220 CS_CHECK(GetConfigurationInfo
,
221 pcmcia_get_configuration_info(handle
, &conf
));
222 link
->conf
.Vcc
= conf
.Vcc
;
225 * In this loop, we scan the CIS for configuration table
226 * entries, each of which describes a valid card
227 * configuration, including voltage, IO window, memory window,
228 * and interrupt settings.
230 * We make no assumptions about the card to be configured: we
231 * use just the information available in the CIS. In an ideal
232 * world, this would work for any PCMCIA card, but it requires
233 * a complete and accurate CIS. In practice, a driver usually
234 * "knows" most of these things without consulting the CIS,
235 * and most client drivers will only use the CIS to fill in
236 * implementation-defined details.
238 tuple
.DesiredTuple
= CISTPL_CFTABLE_ENTRY
;
239 CS_CHECK(GetFirstTuple
, pcmcia_get_first_tuple(handle
, &tuple
));
241 cistpl_cftable_entry_t
*cfg
= &(parse
.cftable_entry
);
242 cistpl_cftable_entry_t dflt
= { .index
= 0 };
244 if ( (pcmcia_get_tuple_data(handle
, &tuple
) != 0)
245 || (pcmcia_parse_tuple(handle
, &tuple
, &parse
) != 0))
248 if (cfg
->flags
& CISTPL_CFTABLE_DEFAULT
)
252 link
->conf
.ConfigIndex
= cfg
->index
;
254 /* Does this card need audio output? */
255 if (cfg
->flags
& CISTPL_CFTABLE_AUDIO
) {
256 link
->conf
.Attributes
|= CONF_ENABLE_SPKR
;
257 link
->conf
.Status
= CCSR_AUDIO_ENA
;
260 /* Use power settings for Vcc and Vpp if present */
261 /* Note that the CIS values need to be rescaled */
262 if (cfg
->vcc
.present
& (1 << CISTPL_POWER_VNOM
)) {
263 if (conf
.Vcc
!= cfg
->vcc
.param
[CISTPL_POWER_VNOM
] / 10000) {
264 DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, cfg CIS = %d)\n", conf
.Vcc
, cfg
->vcc
.param
[CISTPL_POWER_VNOM
] / 10000);
268 } else if (dflt
.vcc
.present
& (1 << CISTPL_POWER_VNOM
)) {
269 if (conf
.Vcc
!= dflt
.vcc
.param
[CISTPL_POWER_VNOM
] / 10000) {
270 DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, dflt CIS = %d)\n", conf
.Vcc
, dflt
.vcc
.param
[CISTPL_POWER_VNOM
] / 10000);
276 if (cfg
->vpp1
.present
& (1 << CISTPL_POWER_VNOM
))
277 link
->conf
.Vpp1
= link
->conf
.Vpp2
=
278 cfg
->vpp1
.param
[CISTPL_POWER_VNOM
] / 10000;
279 else if (dflt
.vpp1
.present
& (1 << CISTPL_POWER_VNOM
))
280 link
->conf
.Vpp1
= link
->conf
.Vpp2
=
281 dflt
.vpp1
.param
[CISTPL_POWER_VNOM
] / 10000;
283 /* Do we need to allocate an interrupt? */
284 link
->conf
.Attributes
|= CONF_ENABLE_IRQ
;
286 /* IO window settings */
287 link
->io
.NumPorts1
= link
->io
.NumPorts2
= 0;
288 if ((cfg
->io
.nwin
> 0) || (dflt
.io
.nwin
> 0)) {
290 (cfg
->io
.nwin
) ? &cfg
->io
: &dflt
.io
;
291 link
->io
.Attributes1
= IO_DATA_PATH_WIDTH_AUTO
;
292 if (!(io
->flags
& CISTPL_IO_8BIT
))
293 link
->io
.Attributes1
=
294 IO_DATA_PATH_WIDTH_16
;
295 if (!(io
->flags
& CISTPL_IO_16BIT
))
296 link
->io
.Attributes1
=
297 IO_DATA_PATH_WIDTH_8
;
298 link
->io
.IOAddrLines
=
299 io
->flags
& CISTPL_IO_LINES_MASK
;
300 link
->io
.BasePort1
= io
->win
[0].base
;
301 link
->io
.NumPorts1
= io
->win
[0].len
;
303 link
->io
.Attributes2
=
304 link
->io
.Attributes1
;
305 link
->io
.BasePort2
= io
->win
[1].base
;
306 link
->io
.NumPorts2
= io
->win
[1].len
;
309 /* This reserves IO space but doesn't actually enable it */
310 if (pcmcia_request_io(link
->handle
, &link
->io
) != 0)
315 /* If we got this far, we're cool! */
320 if (link
->io
.NumPorts1
)
321 pcmcia_release_io(link
->handle
, &link
->io
);
322 last_ret
= pcmcia_get_next_tuple(handle
, &tuple
);
323 if (last_ret
== CS_NO_MORE_ITEMS
) {
324 printk(KERN_ERR PFX
"GetNextTuple(): No matching "
325 "CIS configuration. Maybe you need the "
326 "ignore_cis_vcc=1 parameter.\n");
332 * Allocate an interrupt line. Note that this does not assign
333 * a handler to the interrupt, unless the 'Handler' member of
334 * the irq structure is initialized.
336 CS_CHECK(RequestIRQ
, pcmcia_request_irq(link
->handle
, &link
->irq
));
338 /* We initialize the hermes structure before completing PCMCIA
339 * configuration just in case the interrupt handler gets
341 mem
= ioport_map(link
->io
.BasePort1
, link
->io
.NumPorts1
);
345 hermes_struct_init(hw
, mem
, HERMES_16BIT_REGSPACING
);
348 * This actually configures the PCMCIA socket -- setting up
349 * the I/O windows and the interrupt mapping, and putting the
350 * card and host interface into "Memory and IO" mode.
352 CS_CHECK(RequestConfiguration
,
353 pcmcia_request_configuration(link
->handle
, &link
->conf
));
355 /* Ok, we have the configuration, prepare to register the netdev */
356 dev
->base_addr
= link
->io
.BasePort1
;
357 dev
->irq
= link
->irq
.AssignedIRQ
;
358 SET_MODULE_OWNER(dev
);
359 card
->node
.major
= card
->node
.minor
= 0;
361 SET_NETDEV_DEV(dev
, &handle_to_dev(handle
));
362 /* Tell the stack we exist */
363 if (register_netdev(dev
) != 0) {
364 printk(KERN_ERR PFX
"register_netdev() failed\n");
368 /* At this point, the dev_node_t structure(s) needs to be
369 * initialized and arranged in a linked list at link->dev. */
370 strcpy(card
->node
.dev_name
, dev
->name
);
371 link
->dev
= &card
->node
; /* link->dev being non-NULL is also
372 used to indicate that the
373 net_device has been registered */
374 link
->state
&= ~DEV_CONFIG_PENDING
;
376 /* Finally, report what we've done */
377 printk(KERN_DEBUG
"%s: index 0x%02x: Vcc %d.%d",
378 dev
->name
, link
->conf
.ConfigIndex
,
379 link
->conf
.Vcc
/ 10, link
->conf
.Vcc
% 10);
381 printk(", Vpp %d.%d", link
->conf
.Vpp1
/ 10,
382 link
->conf
.Vpp1
% 10);
383 printk(", irq %d", link
->irq
.AssignedIRQ
);
384 if (link
->io
.NumPorts1
)
385 printk(", io 0x%04x-0x%04x", link
->io
.BasePort1
,
386 link
->io
.BasePort1
+ link
->io
.NumPorts1
- 1);
387 if (link
->io
.NumPorts2
)
388 printk(" & 0x%04x-0x%04x", link
->io
.BasePort2
,
389 link
->io
.BasePort2
+ link
->io
.NumPorts2
- 1);
395 cs_error(link
->handle
, last_fn
, last_ret
);
398 orinoco_cs_release(link
);
399 } /* orinoco_cs_config */
402 * After a card is removed, orinoco_cs_release() will unregister the
403 * device, and release the PCMCIA configuration. If the device is
404 * still open, this will be postponed until it is closed.
407 orinoco_cs_release(dev_link_t
*link
)
409 struct net_device
*dev
= link
->priv
;
410 struct orinoco_private
*priv
= netdev_priv(dev
);
413 /* We're committed to taking the device away now, so mark the
414 * hardware as unavailable */
415 spin_lock_irqsave(&priv
->lock
, flags
);
416 priv
->hw_unavailable
++;
417 spin_unlock_irqrestore(&priv
->lock
, flags
);
419 /* Don't bother checking to see if these succeed or not */
420 pcmcia_release_configuration(link
->handle
);
421 if (link
->io
.NumPorts1
)
422 pcmcia_release_io(link
->handle
, &link
->io
);
423 if (link
->irq
.AssignedIRQ
)
424 pcmcia_release_irq(link
->handle
, &link
->irq
);
425 link
->state
&= ~DEV_CONFIG
;
427 ioport_unmap(priv
->hw
.iobase
);
428 } /* orinoco_cs_release */
430 static int orinoco_cs_suspend(struct pcmcia_device
*p_dev
)
432 dev_link_t
*link
= dev_to_instance(p_dev
);
433 struct net_device
*dev
= link
->priv
;
434 struct orinoco_private
*priv
= netdev_priv(dev
);
435 struct orinoco_pccard
*card
= priv
->card
;
439 link
->state
|= DEV_SUSPEND
;
440 if (link
->state
& DEV_CONFIG
) {
441 /* This is probably racy, but I can't think of
442 a better way, short of rewriting the PCMCIA
443 layer to not suck :-( */
444 if (! test_bit(0, &card
->hard_reset_in_progress
)) {
445 spin_lock_irqsave(&priv
->lock
, flags
);
447 err
= __orinoco_down(dev
);
449 printk(KERN_WARNING
"%s: Error %d downing interface\n",
452 netif_device_detach(dev
);
453 priv
->hw_unavailable
++;
455 spin_unlock_irqrestore(&priv
->lock
, flags
);
458 pcmcia_release_configuration(link
->handle
);
464 static int orinoco_cs_resume(struct pcmcia_device
*p_dev
)
466 dev_link_t
*link
= dev_to_instance(p_dev
);
467 struct net_device
*dev
= link
->priv
;
468 struct orinoco_private
*priv
= netdev_priv(dev
);
469 struct orinoco_pccard
*card
= priv
->card
;
473 link
->state
&= ~DEV_SUSPEND
;
474 if (link
->state
& DEV_CONFIG
) {
475 /* FIXME: should we double check that this is
476 * the same card as we had before */
477 pcmcia_request_configuration(link
->handle
, &link
->conf
);
479 if (! test_bit(0, &card
->hard_reset_in_progress
)) {
480 err
= orinoco_reinit_firmware(dev
);
482 printk(KERN_ERR
"%s: Error %d re-initializing firmware\n",
487 spin_lock_irqsave(&priv
->lock
, flags
);
489 netif_device_attach(dev
);
490 priv
->hw_unavailable
--;
492 if (priv
->open
&& ! priv
->hw_unavailable
) {
493 err
= __orinoco_up(dev
);
495 printk(KERN_ERR
"%s: Error %d restarting card\n",
499 spin_unlock_irqrestore(&priv
->lock
, flags
);
507 /********************************************************************/
508 /* Module initialization */
509 /********************************************************************/
511 /* Can't be declared "const" or the whole __initdata section will
513 static char version
[] __initdata
= DRIVER_NAME
" " DRIVER_VERSION
514 " (David Gibson <hermes@gibson.dropbear.id.au>, "
515 "Pavel Roskin <proski@gnu.org>, et al)";
517 static struct pcmcia_device_id orinoco_cs_ids
[] = {
518 PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
519 PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
520 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
521 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
522 PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
523 PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
524 PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */
525 PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
526 PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
527 PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
528 PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
529 PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
530 PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
531 PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
532 PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
533 PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
534 PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
535 PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
536 PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
537 PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
538 PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
539 PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
540 PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
541 PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
542 PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
543 PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
544 PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
545 PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
546 PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
547 PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
548 PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
549 PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092),
550 PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
551 PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
552 PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
553 PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
554 PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
555 PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
556 PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
557 PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
558 PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
559 PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39),
560 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
561 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
562 PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
563 PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
564 PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
565 PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
566 PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
567 PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
568 PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
569 PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
570 PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
571 PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
572 PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
573 PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
574 PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2),
575 PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
576 PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
577 PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
578 PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
579 PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
580 PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
581 PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
582 PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
583 PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
584 PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
585 PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
586 PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
587 PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39),
588 PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
589 PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
590 PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
591 PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
592 PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
593 PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
594 PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
595 PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39),
596 PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
599 MODULE_DEVICE_TABLE(pcmcia
, orinoco_cs_ids
);
601 static struct pcmcia_driver orinoco_driver
= {
602 .owner
= THIS_MODULE
,
606 .probe
= orinoco_cs_attach
,
607 .remove
= orinoco_cs_detach
,
608 .id_table
= orinoco_cs_ids
,
609 .suspend
= orinoco_cs_suspend
,
610 .resume
= orinoco_cs_resume
,
614 init_orinoco_cs(void)
616 printk(KERN_DEBUG
"%s\n", version
);
618 return pcmcia_register_driver(&orinoco_driver
);
622 exit_orinoco_cs(void)
624 pcmcia_unregister_driver(&orinoco_driver
);
627 module_init(init_orinoco_cs
);
628 module_exit(exit_orinoco_cs
);