]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - drivers/net/wireless/orinoco_nortel.c
Merge branch 'master' into upstream
[mirror_ubuntu-artful-kernel.git] / drivers / net / wireless / orinoco_nortel.c
1 /* orinoco_nortel.c
2 *
3 * Driver for Prism II devices which would usually be driven by orinoco_cs,
4 * but are connected to the PCI bus by a PCI-to-PCMCIA adapter used in
5 * Nortel emobility, Symbol LA-4113 and Symbol LA-4123.
6 *
7 * Copyright (C) 2002 Tobias Hoffmann
8 * (C) 2003 Christoph Jungegger <disdos@traum404.de>
9 *
10 * Some of this code is borrowed from orinoco_plx.c
11 * Copyright (C) 2001 Daniel Barlow
12 * Some of this code is borrowed from orinoco_pci.c
13 * Copyright (C) 2001 Jean Tourrilhes
14 * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
15 * has been copied from it. linux-wlan-ng-0.1.10 is originally :
16 * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
17 *
18 * The contents of this file are subject to the Mozilla Public License
19 * Version 1.1 (the "License"); you may not use this file except in
20 * compliance with the License. You may obtain a copy of the License
21 * at http://www.mozilla.org/MPL/
22 *
23 * Software distributed under the License is distributed on an "AS IS"
24 * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
25 * the License for the specific language governing rights and
26 * limitations under the License.
27 *
28 * Alternatively, the contents of this file may be used under the
29 * terms of the GNU General Public License version 2 (the "GPL"), in
30 * which case the provisions of the GPL are applicable instead of the
31 * above. If you wish to allow the use of your version of this file
32 * only under the terms of the GPL and not to allow others to use your
33 * version of this file under the MPL, indicate your decision by
34 * deleting the provisions above and replace them with the notice and
35 * other provisions required by the GPL. If you do not delete the
36 * provisions above, a recipient may use your version of this file
37 * under either the MPL or the GPL.
38 */
39
40 #define DRIVER_NAME "orinoco_nortel"
41 #define PFX DRIVER_NAME ": "
42
43 #include <linux/config.h>
44 #include <linux/module.h>
45 #include <linux/kernel.h>
46 #include <linux/init.h>
47 #include <linux/delay.h>
48 #include <linux/pci.h>
49 #include <pcmcia/cisreg.h>
50
51 #include "orinoco.h"
52 #include "orinoco_pci.h"
53
54 #define COR_OFFSET (0xe0) /* COR attribute offset of Prism2 PC card */
55 #define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
56
57
58 /*
59 * Do a soft reset of the card using the Configuration Option Register
60 * We need this to get going...
61 * This is the part of the code that is strongly inspired from wlan-ng
62 *
63 * Note bis : Don't try to access HERMES_CMD during the reset phase.
64 * It just won't work !
65 */
66 static int orinoco_nortel_cor_reset(struct orinoco_private *priv)
67 {
68 struct orinoco_pci_card *card = priv->card;
69
70 /* Assert the reset until the card notices */
71 iowrite16(8, card->bridge_io + 2);
72 ioread16(card->attr_io + COR_OFFSET);
73 iowrite16(0x80, card->attr_io + COR_OFFSET);
74 mdelay(1);
75
76 /* Give time for the card to recover from this hard effort */
77 iowrite16(0, card->attr_io + COR_OFFSET);
78 iowrite16(0, card->attr_io + COR_OFFSET);
79 mdelay(1);
80
81 /* Set COR as usual */
82 iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
83 iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
84 mdelay(1);
85
86 iowrite16(0x228, card->bridge_io + 2);
87
88 return 0;
89 }
90
91 static int orinoco_nortel_hw_init(struct orinoco_pci_card *card)
92 {
93 int i;
94 u32 reg;
95
96 /* Setup bridge */
97 if (ioread16(card->bridge_io) & 1) {
98 printk(KERN_ERR PFX "brg1 answer1 wrong\n");
99 return -EBUSY;
100 }
101 iowrite16(0x118, card->bridge_io + 2);
102 iowrite16(0x108, card->bridge_io + 2);
103 mdelay(30);
104 iowrite16(0x8, card->bridge_io + 2);
105 for (i = 0; i < 30; i++) {
106 mdelay(30);
107 if (ioread16(card->bridge_io) & 0x10) {
108 break;
109 }
110 }
111 if (i == 30) {
112 printk(KERN_ERR PFX "brg1 timed out\n");
113 return -EBUSY;
114 }
115 if (ioread16(card->attr_io + COR_OFFSET) & 1) {
116 printk(KERN_ERR PFX "brg2 answer1 wrong\n");
117 return -EBUSY;
118 }
119 if (ioread16(card->attr_io + COR_OFFSET + 2) & 1) {
120 printk(KERN_ERR PFX "brg2 answer2 wrong\n");
121 return -EBUSY;
122 }
123 if (ioread16(card->attr_io + COR_OFFSET + 4) & 1) {
124 printk(KERN_ERR PFX "brg2 answer3 wrong\n");
125 return -EBUSY;
126 }
127
128 /* Set the PCMCIA COR register */
129 iowrite16(COR_VALUE, card->attr_io + COR_OFFSET);
130 mdelay(1);
131 reg = ioread16(card->attr_io + COR_OFFSET);
132 if (reg != COR_VALUE) {
133 printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n",
134 reg);
135 return -EBUSY;
136 }
137
138 /* Set LEDs */
139 iowrite16(1, card->bridge_io + 10);
140 return 0;
141 }
142
143 static int orinoco_nortel_init_one(struct pci_dev *pdev,
144 const struct pci_device_id *ent)
145 {
146 int err;
147 struct orinoco_private *priv;
148 struct orinoco_pci_card *card;
149 struct net_device *dev;
150 void __iomem *hermes_io, *bridge_io, *attr_io;
151
152 err = pci_enable_device(pdev);
153 if (err) {
154 printk(KERN_ERR PFX "Cannot enable PCI device\n");
155 return err;
156 }
157
158 err = pci_request_regions(pdev, DRIVER_NAME);
159 if (err) {
160 printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
161 goto fail_resources;
162 }
163
164 bridge_io = pci_iomap(pdev, 0, 0);
165 if (!bridge_io) {
166 printk(KERN_ERR PFX "Cannot map bridge registers\n");
167 err = -EIO;
168 goto fail_map_bridge;
169 }
170
171 attr_io = pci_iomap(pdev, 1, 0);
172 if (!attr_io) {
173 printk(KERN_ERR PFX "Cannot map PCMCIA attributes\n");
174 err = -EIO;
175 goto fail_map_attr;
176 }
177
178 hermes_io = pci_iomap(pdev, 2, 0);
179 if (!hermes_io) {
180 printk(KERN_ERR PFX "Cannot map chipset registers\n");
181 err = -EIO;
182 goto fail_map_hermes;
183 }
184
185 /* Allocate network device */
186 dev = alloc_orinocodev(sizeof(*card), orinoco_nortel_cor_reset);
187 if (!dev) {
188 printk(KERN_ERR PFX "Cannot allocate network device\n");
189 err = -ENOMEM;
190 goto fail_alloc;
191 }
192
193 priv = netdev_priv(dev);
194 card = priv->card;
195 card->bridge_io = bridge_io;
196 card->attr_io = attr_io;
197 SET_MODULE_OWNER(dev);
198 SET_NETDEV_DEV(dev, &pdev->dev);
199
200 hermes_struct_init(&priv->hw, hermes_io, HERMES_16BIT_REGSPACING);
201
202 err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
203 dev->name, dev);
204 if (err) {
205 printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
206 err = -EBUSY;
207 goto fail_irq;
208 }
209 orinoco_pci_setup_netdev(dev, pdev, 2);
210
211 err = orinoco_nortel_hw_init(card);
212 if (err) {
213 printk(KERN_ERR PFX "Hardware initialization failed\n");
214 goto fail;
215 }
216
217 err = orinoco_nortel_cor_reset(priv);
218 if (err) {
219 printk(KERN_ERR PFX "Initial reset failed\n");
220 goto fail;
221 }
222
223 err = register_netdev(dev);
224 if (err) {
225 printk(KERN_ERR PFX "Cannot register network device\n");
226 goto fail;
227 }
228
229 pci_set_drvdata(pdev, dev);
230
231 return 0;
232
233 fail:
234 free_irq(pdev->irq, dev);
235
236 fail_irq:
237 pci_set_drvdata(pdev, NULL);
238 free_orinocodev(dev);
239
240 fail_alloc:
241 pci_iounmap(pdev, hermes_io);
242
243 fail_map_hermes:
244 pci_iounmap(pdev, attr_io);
245
246 fail_map_attr:
247 pci_iounmap(pdev, bridge_io);
248
249 fail_map_bridge:
250 pci_release_regions(pdev);
251
252 fail_resources:
253 pci_disable_device(pdev);
254
255 return err;
256 }
257
258 static void __devexit orinoco_nortel_remove_one(struct pci_dev *pdev)
259 {
260 struct net_device *dev = pci_get_drvdata(pdev);
261 struct orinoco_private *priv = netdev_priv(dev);
262 struct orinoco_pci_card *card = priv->card;
263
264 /* Clear LEDs */
265 iowrite16(0, card->bridge_io + 10);
266
267 unregister_netdev(dev);
268 free_irq(dev->irq, dev);
269 pci_set_drvdata(pdev, NULL);
270 free_orinocodev(dev);
271 pci_iounmap(pdev, priv->hw.iobase);
272 pci_iounmap(pdev, card->attr_io);
273 pci_iounmap(pdev, card->bridge_io);
274 pci_release_regions(pdev);
275 pci_disable_device(pdev);
276 }
277
278 static struct pci_device_id orinoco_nortel_id_table[] = {
279 /* Nortel emobility PCI */
280 {0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,},
281 /* Symbol LA-4123 PCI */
282 {0x1562, 0x0001, PCI_ANY_ID, PCI_ANY_ID,},
283 {0,},
284 };
285
286 MODULE_DEVICE_TABLE(pci, orinoco_nortel_id_table);
287
288 static struct pci_driver orinoco_nortel_driver = {
289 .name = DRIVER_NAME,
290 .id_table = orinoco_nortel_id_table,
291 .probe = orinoco_nortel_init_one,
292 .remove = __devexit_p(orinoco_nortel_remove_one),
293 .suspend = orinoco_pci_suspend,
294 .resume = orinoco_pci_resume,
295 };
296
297 static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
298 " (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)";
299 MODULE_AUTHOR("Christoph Jungegger <disdos@traum404.de>");
300 MODULE_DESCRIPTION
301 ("Driver for wireless LAN cards using the Nortel PCI bridge");
302 MODULE_LICENSE("Dual MPL/GPL");
303
304 static int __init orinoco_nortel_init(void)
305 {
306 printk(KERN_DEBUG "%s\n", version);
307 return pci_module_init(&orinoco_nortel_driver);
308 }
309
310 static void __exit orinoco_nortel_exit(void)
311 {
312 pci_unregister_driver(&orinoco_nortel_driver);
313 }
314
315 module_init(orinoco_nortel_init);
316 module_exit(orinoco_nortel_exit);
317
318 /*
319 * Local variables:
320 * c-indent-level: 8
321 * c-basic-offset: 8
322 * tab-width: 8
323 * End:
324 */