2 Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23 Abstract: rt2x00 generic configuration routines.
26 #include <linux/kernel.h>
27 #include <linux/module.h>
30 #include "rt2x00lib.h"
32 void rt2x00lib_config_intf(struct rt2x00_dev
*rt2x00dev
,
33 struct rt2x00_intf
*intf
,
34 enum ieee80211_if_types type
,
37 struct rt2x00intf_conf conf
;
38 unsigned int flags
= 0;
43 case IEEE80211_IF_TYPE_IBSS
:
44 case IEEE80211_IF_TYPE_AP
:
45 conf
.sync
= TSF_SYNC_BEACON
;
47 case IEEE80211_IF_TYPE_STA
:
48 conf
.sync
= TSF_SYNC_INFRA
;
51 conf
.sync
= TSF_SYNC_NONE
;
56 * Note that when NULL is passed as address we will send
57 * 00:00:00:00:00 to the device to clear the address.
58 * This will prevent the device being confused when it wants
59 * to ACK frames or consideres itself associated.
61 memset(&conf
.mac
, 0, sizeof(conf
.mac
));
63 memcpy(&conf
.mac
, mac
, ETH_ALEN
);
65 memset(&conf
.bssid
, 0, sizeof(conf
.bssid
));
67 memcpy(&conf
.bssid
, bssid
, ETH_ALEN
);
69 flags
|= CONFIG_UPDATE_TYPE
;
70 if (mac
|| (!rt2x00dev
->intf_ap_count
&& !rt2x00dev
->intf_sta_count
))
71 flags
|= CONFIG_UPDATE_MAC
;
72 if (bssid
|| (!rt2x00dev
->intf_ap_count
&& !rt2x00dev
->intf_sta_count
))
73 flags
|= CONFIG_UPDATE_BSSID
;
75 rt2x00dev
->ops
->lib
->config_intf(rt2x00dev
, intf
, &conf
, flags
);
78 void rt2x00lib_config_erp(struct rt2x00_dev
*rt2x00dev
,
79 struct rt2x00_intf
*intf
,
80 struct ieee80211_bss_conf
*bss_conf
)
82 struct rt2x00lib_erp erp
;
84 memset(&erp
, 0, sizeof(erp
));
86 erp
.short_preamble
= bss_conf
->use_short_preamble
;
87 erp
.ack_timeout
= PLCP
+ get_duration(ACK_SIZE
, 10);
88 erp
.ack_consume_time
= SIFS
+ PLCP
+ get_duration(ACK_SIZE
, 10);
90 if (rt2x00dev
->hw
->conf
.flags
& IEEE80211_CONF_SHORT_SLOT_TIME
)
91 erp
.ack_timeout
+= SHORT_DIFS
;
93 erp
.ack_timeout
+= DIFS
;
95 if (bss_conf
->use_short_preamble
) {
96 erp
.ack_timeout
+= SHORT_PREAMBLE
;
97 erp
.ack_consume_time
+= SHORT_PREAMBLE
;
99 erp
.ack_timeout
+= PREAMBLE
;
100 erp
.ack_consume_time
+= PREAMBLE
;
103 rt2x00dev
->ops
->lib
->config_erp(rt2x00dev
, &erp
);
106 void rt2x00lib_config_antenna(struct rt2x00_dev
*rt2x00dev
,
107 enum antenna rx
, enum antenna tx
)
109 struct rt2x00lib_conf libconf
;
114 if (rx
== rt2x00dev
->link
.ant
.active
.rx
&&
115 tx
== rt2x00dev
->link
.ant
.active
.tx
)
119 * Antenna setup changes require the RX to be disabled,
120 * else the changes will be ignored by the device.
122 if (test_bit(DEVICE_ENABLED_RADIO
, &rt2x00dev
->flags
))
123 rt2x00lib_toggle_rx(rt2x00dev
, STATE_RADIO_RX_OFF_LINK
);
126 * Write new antenna setup to device and reset the link tuner.
127 * The latter is required since we need to recalibrate the
128 * noise-sensitivity ratio for the new setup.
130 rt2x00dev
->ops
->lib
->config(rt2x00dev
, &libconf
, CONFIG_UPDATE_ANTENNA
);
131 rt2x00lib_reset_link_tuner(rt2x00dev
);
132 rt2x00_reset_link_ant_rssi(&rt2x00dev
->link
);
134 rt2x00dev
->link
.ant
.active
.rx
= libconf
.ant
.rx
;
135 rt2x00dev
->link
.ant
.active
.tx
= libconf
.ant
.tx
;
137 if (test_bit(DEVICE_ENABLED_RADIO
, &rt2x00dev
->flags
))
138 rt2x00lib_toggle_rx(rt2x00dev
, STATE_RADIO_RX_ON_LINK
);
141 static u32
rt2x00lib_get_basic_rates(struct ieee80211_supported_band
*band
)
143 const struct rt2x00_rate
*rate
;
147 for (i
= 0; i
< band
->n_bitrates
; i
++) {
148 rate
= rt2x00_get_rate(band
->bitrates
[i
].hw_value
);
149 if (rate
->flags
& DEV_RATE_BASIC
)
150 mask
|= rate
->ratemask
;
156 void rt2x00lib_config(struct rt2x00_dev
*rt2x00dev
,
157 struct ieee80211_conf
*conf
, const int force_config
)
159 struct rt2x00lib_conf libconf
;
160 struct ieee80211_supported_band
*band
;
161 struct antenna_setup
*default_ant
= &rt2x00dev
->default_ant
;
162 struct antenna_setup
*active_ant
= &rt2x00dev
->link
.ant
.active
;
167 * In some situations we want to force all configurations
168 * to be reloaded (When resuming for instance).
171 flags
= CONFIG_UPDATE_ALL
;
176 * Check which configuration options have been
177 * updated and should be send to the device.
179 if (rt2x00dev
->rx_status
.band
!= conf
->channel
->band
)
180 flags
|= CONFIG_UPDATE_PHYMODE
;
181 if (rt2x00dev
->rx_status
.freq
!= conf
->channel
->center_freq
)
182 flags
|= CONFIG_UPDATE_CHANNEL
;
183 if (rt2x00dev
->tx_power
!= conf
->power_level
)
184 flags
|= CONFIG_UPDATE_TXPOWER
;
187 * Determining changes in the antenna setups request several checks:
188 * antenna_sel_{r,t}x = 0
189 * -> Does active_{r,t}x match default_{r,t}x
190 * -> Is default_{r,t}x SW_DIVERSITY
191 * antenna_sel_{r,t}x = 1/2
192 * -> Does active_{r,t}x match antenna_sel_{r,t}x
193 * The reason for not updating the antenna while SW diversity
194 * should be used is simple: Software diversity means that
195 * we should switch between the antenna's based on the
196 * quality. This means that the current antenna is good enough
197 * to work with untill the link tuner decides that an antenna
198 * switch should be performed.
200 if (!conf
->antenna_sel_rx
&&
201 default_ant
->rx
!= ANTENNA_SW_DIVERSITY
&&
202 default_ant
->rx
!= active_ant
->rx
)
203 flags
|= CONFIG_UPDATE_ANTENNA
;
204 else if (conf
->antenna_sel_rx
&&
205 conf
->antenna_sel_rx
!= active_ant
->rx
)
206 flags
|= CONFIG_UPDATE_ANTENNA
;
207 else if (active_ant
->rx
== ANTENNA_SW_DIVERSITY
)
208 flags
|= CONFIG_UPDATE_ANTENNA
;
210 if (!conf
->antenna_sel_tx
&&
211 default_ant
->tx
!= ANTENNA_SW_DIVERSITY
&&
212 default_ant
->tx
!= active_ant
->tx
)
213 flags
|= CONFIG_UPDATE_ANTENNA
;
214 else if (conf
->antenna_sel_tx
&&
215 conf
->antenna_sel_tx
!= active_ant
->tx
)
216 flags
|= CONFIG_UPDATE_ANTENNA
;
217 else if (active_ant
->tx
== ANTENNA_SW_DIVERSITY
)
218 flags
|= CONFIG_UPDATE_ANTENNA
;
221 * The following configuration options are never
222 * stored anywhere and will always be updated.
224 flags
|= CONFIG_UPDATE_SLOT_TIME
;
225 flags
|= CONFIG_UPDATE_BEACON_INT
;
228 * We have determined what options should be updated,
229 * now precalculate device configuration values depending
230 * on what configuration options need to be updated.
233 memset(&libconf
, 0, sizeof(libconf
));
235 if (flags
& CONFIG_UPDATE_PHYMODE
) {
236 band
= &rt2x00dev
->bands
[conf
->channel
->band
];
238 libconf
.band
= conf
->channel
->band
;
239 libconf
.basic_rates
= rt2x00lib_get_basic_rates(band
);
242 if (flags
& CONFIG_UPDATE_CHANNEL
) {
244 &rt2x00dev
->spec
.channels
[conf
->channel
->hw_value
],
248 if (flags
& CONFIG_UPDATE_ANTENNA
) {
249 if (conf
->antenna_sel_rx
)
250 libconf
.ant
.rx
= conf
->antenna_sel_rx
;
251 else if (default_ant
->rx
!= ANTENNA_SW_DIVERSITY
)
252 libconf
.ant
.rx
= default_ant
->rx
;
253 else if (active_ant
->rx
== ANTENNA_SW_DIVERSITY
)
254 libconf
.ant
.rx
= ANTENNA_B
;
256 if (conf
->antenna_sel_tx
)
257 libconf
.ant
.tx
= conf
->antenna_sel_tx
;
258 else if (default_ant
->tx
!= ANTENNA_SW_DIVERSITY
)
259 libconf
.ant
.tx
= default_ant
->tx
;
260 else if (active_ant
->tx
== ANTENNA_SW_DIVERSITY
)
261 libconf
.ant
.tx
= ANTENNA_B
;
264 if (flags
& CONFIG_UPDATE_SLOT_TIME
) {
265 short_slot_time
= conf
->flags
& IEEE80211_CONF_SHORT_SLOT_TIME
;
268 short_slot_time
? SHORT_SLOT_TIME
: SLOT_TIME
;
270 libconf
.pifs
= short_slot_time
? SHORT_PIFS
: PIFS
;
271 libconf
.difs
= short_slot_time
? SHORT_DIFS
: DIFS
;
278 * Start configuration.
280 rt2x00dev
->ops
->lib
->config(rt2x00dev
, &libconf
, flags
);
283 * Some configuration changes affect the link quality
284 * which means we need to reset the link tuner.
286 if (flags
& (CONFIG_UPDATE_CHANNEL
| CONFIG_UPDATE_ANTENNA
))
287 rt2x00lib_reset_link_tuner(rt2x00dev
);
289 if (flags
& CONFIG_UPDATE_PHYMODE
) {
290 rt2x00dev
->curr_band
= conf
->channel
->band
;
291 rt2x00dev
->rx_status
.band
= conf
->channel
->band
;
294 rt2x00dev
->rx_status
.freq
= conf
->channel
->center_freq
;
295 rt2x00dev
->tx_power
= conf
->power_level
;
297 if (flags
& CONFIG_UPDATE_ANTENNA
) {
298 rt2x00dev
->link
.ant
.active
.rx
= libconf
.ant
.rx
;
299 rt2x00dev
->link
.ant
.active
.tx
= libconf
.ant
.tx
;