]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - drivers/net/wireless/rtlwifi/rtl8188ee/sw.c
PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use
[mirror_ubuntu-bionic-kernel.git] / drivers / net / wireless / rtlwifi / rtl8188ee / sw.c
1 /******************************************************************************
2 *
3 * Copyright(c) 2009-2013 Realtek Corporation.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17 *
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
20 *
21 * Contact Information:
22 * wlanfae <wlanfae@realtek.com>
23 * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
24 * Hsinchu 300, Taiwan.
25 *
26 * Larry Finger <Larry.Finger@lwfinger.net>
27 *
28 *****************************************************************************/
29
30 #include "../wifi.h"
31 #include "../core.h"
32 #include "../pci.h"
33 #include "../base.h"
34 #include "reg.h"
35 #include "def.h"
36 #include "phy.h"
37 #include "dm.h"
38 #include "hw.h"
39 #include "sw.h"
40 #include "trx.h"
41 #include "led.h"
42 #include "table.h"
43
44 #include <linux/vmalloc.h>
45 #include <linux/module.h>
46
47 static void rtl88e_init_aspm_vars(struct ieee80211_hw *hw)
48 {
49 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
50
51 /*close ASPM for AMD defaultly */
52 rtlpci->const_amdpci_aspm = 0;
53
54 /* ASPM PS mode.
55 * 0 - Disable ASPM,
56 * 1 - Enable ASPM without Clock Req,
57 * 2 - Enable ASPM with Clock Req,
58 * 3 - Alwyas Enable ASPM with Clock Req,
59 * 4 - Always Enable ASPM without Clock Req.
60 * set defult to RTL8192CE:3 RTL8192E:2
61 */
62 rtlpci->const_pci_aspm = 3;
63
64 /*Setting for PCI-E device */
65 rtlpci->const_devicepci_aspm_setting = 0x03;
66
67 /*Setting for PCI-E bridge */
68 rtlpci->const_hostpci_aspm_setting = 0x02;
69
70 /* In Hw/Sw Radio Off situation.
71 * 0 - Default,
72 * 1 - From ASPM setting without low Mac Pwr,
73 * 2 - From ASPM setting with low Mac Pwr,
74 * 3 - Bus D3
75 * set default to RTL8192CE:0 RTL8192SE:2
76 */
77 rtlpci->const_hwsw_rfoff_d3 = 0;
78
79 /* This setting works for those device with
80 * backdoor ASPM setting such as EPHY setting.
81 * 0 - Not support ASPM,
82 * 1 - Support ASPM,
83 * 2 - According to chipset.
84 */
85 rtlpci->const_support_pciaspm = 1;
86 }
87
88 int rtl88e_init_sw_vars(struct ieee80211_hw *hw)
89 {
90 int err = 0;
91 struct rtl_priv *rtlpriv = rtl_priv(hw);
92 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
93 u8 tid;
94
95 rtl8188ee_bt_reg_init(hw);
96 rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support;
97
98 rtlpriv->dm.dm_initialgain_enable = 1;
99 rtlpriv->dm.dm_flag = 0;
100 rtlpriv->dm.disable_framebursting = 0;
101 rtlpriv->dm.thermalvalue = 0;
102 rtlpci->transmit_config = CFENDFORM | BIT(15);
103
104 /* compatible 5G band 88ce just 2.4G band & smsp */
105 rtlpriv->rtlhal.current_bandtype = BAND_ON_2_4G;
106 rtlpriv->rtlhal.bandset = BAND_ON_2_4G;
107 rtlpriv->rtlhal.macphymode = SINGLEMAC_SINGLEPHY;
108
109 rtlpci->receive_config = (RCR_APPFCS |
110 RCR_APP_MIC |
111 RCR_APP_ICV |
112 RCR_APP_PHYST_RXFF |
113 RCR_HTC_LOC_CTRL |
114 RCR_AMF |
115 RCR_ACF |
116 RCR_ADF |
117 RCR_AICV |
118 RCR_ACRC32 |
119 RCR_AB |
120 RCR_AM |
121 RCR_APM |
122 0);
123
124 rtlpci->irq_mask[0] =
125 (u32) (IMR_PSTIMEOUT |
126 IMR_HSISR_IND_ON_INT |
127 IMR_C2HCMD |
128 IMR_HIGHDOK |
129 IMR_MGNTDOK |
130 IMR_BKDOK |
131 IMR_BEDOK |
132 IMR_VIDOK |
133 IMR_VODOK |
134 IMR_RDU |
135 IMR_ROK |
136 0);
137 rtlpci->irq_mask[1] = (u32) (IMR_RXFOVW | 0);
138 rtlpci->sys_irq_mask = (u32) (HSIMR_PDN_INT_EN | HSIMR_RON_INT_EN);
139
140 /* for debug level */
141 rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug;
142 /* for LPS & IPS */
143 rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
144 rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
145 rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
146 if (!rtlpriv->psc.inactiveps)
147 pr_info("rtl8188ee: Power Save off (module option)\n");
148 if (!rtlpriv->psc.fwctrl_lps)
149 pr_info("rtl8188ee: FW Power Save off (module option)\n");
150 rtlpriv->psc.reg_fwctrl_lps = 3;
151 rtlpriv->psc.reg_max_lps_awakeintvl = 5;
152 /* for ASPM, you can close aspm through
153 * set const_support_pciaspm = 0
154 */
155 rtl88e_init_aspm_vars(hw);
156
157 if (rtlpriv->psc.reg_fwctrl_lps == 1)
158 rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE;
159 else if (rtlpriv->psc.reg_fwctrl_lps == 2)
160 rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE;
161 else if (rtlpriv->psc.reg_fwctrl_lps == 3)
162 rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE;
163
164 /* for firmware buf */
165 rtlpriv->rtlhal.pfirmware = vmalloc(0x8000);
166 if (!rtlpriv->rtlhal.pfirmware) {
167 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
168 "Can't alloc buffer for fw.\n");
169 return 1;
170 }
171
172 rtlpriv->cfg->fw_name = "rtlwifi/rtl8188efw.bin";
173 rtlpriv->max_fw_size = 0x8000;
174 pr_info("Using firmware %s\n", rtlpriv->cfg->fw_name);
175 err = request_firmware_nowait(THIS_MODULE, 1, rtlpriv->cfg->fw_name,
176 rtlpriv->io.dev, GFP_KERNEL, hw,
177 rtl_fw_cb);
178 if (err) {
179 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
180 "Failed to request firmware!\n");
181 return 1;
182 }
183
184 /* for early mode */
185 rtlpriv->rtlhal.earlymode_enable = false;
186 rtlpriv->rtlhal.max_earlymode_num = 10;
187 for (tid = 0; tid < 8; tid++)
188 skb_queue_head_init(&rtlpriv->mac80211.skb_waitq[tid]);
189
190 /*low power */
191 rtlpriv->psc.low_power_enable = false;
192 if (rtlpriv->psc.low_power_enable) {
193 init_timer(&rtlpriv->works.fw_clockoff_timer);
194 setup_timer(&rtlpriv->works.fw_clockoff_timer,
195 rtl88ee_fw_clk_off_timer_callback,
196 (unsigned long)hw);
197 }
198
199 init_timer(&rtlpriv->works.fast_antenna_training_timer);
200 setup_timer(&rtlpriv->works.fast_antenna_training_timer,
201 rtl88e_dm_fast_antenna_training_callback,
202 (unsigned long)hw);
203 return err;
204 }
205
206 void rtl88e_deinit_sw_vars(struct ieee80211_hw *hw)
207 {
208 struct rtl_priv *rtlpriv = rtl_priv(hw);
209
210 if (rtlpriv->rtlhal.pfirmware) {
211 vfree(rtlpriv->rtlhal.pfirmware);
212 rtlpriv->rtlhal.pfirmware = NULL;
213 }
214
215 if (rtlpriv->psc.low_power_enable)
216 del_timer_sync(&rtlpriv->works.fw_clockoff_timer);
217
218 del_timer_sync(&rtlpriv->works.fast_antenna_training_timer);
219 }
220
221 static struct rtl_hal_ops rtl8188ee_hal_ops = {
222 .init_sw_vars = rtl88e_init_sw_vars,
223 .deinit_sw_vars = rtl88e_deinit_sw_vars,
224 .read_eeprom_info = rtl88ee_read_eeprom_info,
225 .interrupt_recognized = rtl88ee_interrupt_recognized,/*need check*/
226 .hw_init = rtl88ee_hw_init,
227 .hw_disable = rtl88ee_card_disable,
228 .hw_suspend = rtl88ee_suspend,
229 .hw_resume = rtl88ee_resume,
230 .enable_interrupt = rtl88ee_enable_interrupt,
231 .disable_interrupt = rtl88ee_disable_interrupt,
232 .set_network_type = rtl88ee_set_network_type,
233 .set_chk_bssid = rtl88ee_set_check_bssid,
234 .set_qos = rtl88ee_set_qos,
235 .set_bcn_reg = rtl88ee_set_beacon_related_registers,
236 .set_bcn_intv = rtl88ee_set_beacon_interval,
237 .update_interrupt_mask = rtl88ee_update_interrupt_mask,
238 .get_hw_reg = rtl88ee_get_hw_reg,
239 .set_hw_reg = rtl88ee_set_hw_reg,
240 .update_rate_tbl = rtl88ee_update_hal_rate_tbl,
241 .fill_tx_desc = rtl88ee_tx_fill_desc,
242 .fill_tx_cmddesc = rtl88ee_tx_fill_cmddesc,
243 .query_rx_desc = rtl88ee_rx_query_desc,
244 .set_channel_access = rtl88ee_update_channel_access_setting,
245 .radio_onoff_checking = rtl88ee_gpio_radio_on_off_checking,
246 .set_bw_mode = rtl88e_phy_set_bw_mode,
247 .switch_channel = rtl88e_phy_sw_chnl,
248 .dm_watchdog = rtl88e_dm_watchdog,
249 .scan_operation_backup = rtl_phy_scan_operation_backup,
250 .set_rf_power_state = rtl88e_phy_set_rf_power_state,
251 .led_control = rtl88ee_led_control,
252 .set_desc = rtl88ee_set_desc,
253 .get_desc = rtl88ee_get_desc,
254 .tx_polling = rtl88ee_tx_polling,
255 .enable_hw_sec = rtl88ee_enable_hw_security_config,
256 .set_key = rtl88ee_set_key,
257 .init_sw_leds = rtl88ee_init_sw_leds,
258 .get_bbreg = rtl88e_phy_query_bb_reg,
259 .set_bbreg = rtl88e_phy_set_bb_reg,
260 .get_rfreg = rtl88e_phy_query_rf_reg,
261 .set_rfreg = rtl88e_phy_set_rf_reg,
262 };
263
264 static struct rtl_mod_params rtl88ee_mod_params = {
265 .sw_crypto = false,
266 .inactiveps = true,
267 .swctrl_lps = false,
268 .fwctrl_lps = true,
269 .msi_support = false,
270 .debug = DBG_EMERG,
271 };
272
273 static struct rtl_hal_cfg rtl88ee_hal_cfg = {
274 .bar_id = 2,
275 .write_readback = true,
276 .name = "rtl88e_pci",
277 .ops = &rtl8188ee_hal_ops,
278 .mod_params = &rtl88ee_mod_params,
279
280 .maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL,
281 .maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN,
282 .maps[SYS_CLK] = REG_SYS_CLKR,
283 .maps[MAC_RCR_AM] = AM,
284 .maps[MAC_RCR_AB] = AB,
285 .maps[MAC_RCR_ACRC32] = ACRC32,
286 .maps[MAC_RCR_ACF] = ACF,
287 .maps[MAC_RCR_AAP] = AAP,
288
289 .maps[EFUSE_ACCESS] = REG_EFUSE_ACCESS,
290
291 .maps[EFUSE_TEST] = REG_EFUSE_TEST,
292 .maps[EFUSE_CTRL] = REG_EFUSE_CTRL,
293 .maps[EFUSE_CLK] = 0,
294 .maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL,
295 .maps[EFUSE_PWC_EV12V] = PWC_EV12V,
296 .maps[EFUSE_FEN_ELDR] = FEN_ELDR,
297 .maps[EFUSE_LOADER_CLK_EN] = LOADER_CLK_EN,
298 .maps[EFUSE_ANA8M] = ANA8M,
299 .maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE,
300 .maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION,
301 .maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN,
302 .maps[EFUSE_OOB_PROTECT_BYTES_LEN] = EFUSE_OOB_PROTECT_BYTES,
303
304 .maps[RWCAM] = REG_CAMCMD,
305 .maps[WCAMI] = REG_CAMWRITE,
306 .maps[RCAMO] = REG_CAMREAD,
307 .maps[CAMDBG] = REG_CAMDBG,
308 .maps[SECR] = REG_SECCFG,
309 .maps[SEC_CAM_NONE] = CAM_NONE,
310 .maps[SEC_CAM_WEP40] = CAM_WEP40,
311 .maps[SEC_CAM_TKIP] = CAM_TKIP,
312 .maps[SEC_CAM_AES] = CAM_AES,
313 .maps[SEC_CAM_WEP104] = CAM_WEP104,
314
315 .maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6,
316 .maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5,
317 .maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4,
318 .maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3,
319 .maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2,
320 .maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1,
321 /* .maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8, */ /*need check*/
322 .maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7,
323 .maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6,
324 .maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5,
325 .maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4,
326 .maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3,
327 .maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2,
328 .maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1,
329 /* .maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2,*/
330 /* .maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1,*/
331
332 .maps[RTL_IMR_TXFOVW] = IMR_TXFOVW,
333 .maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT,
334 .maps[RTL_IMR_BCNINT] = IMR_BCNDMAINT0,
335 .maps[RTL_IMR_RXFOVW] = IMR_RXFOVW,
336 .maps[RTL_IMR_RDU] = IMR_RDU,
337 .maps[RTL_IMR_ATIMEND] = IMR_ATIMEND,
338 .maps[RTL_IMR_BDOK] = IMR_BCNDOK0,
339 .maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK,
340 .maps[RTL_IMR_TBDER] = IMR_TBDER,
341 .maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK,
342 .maps[RTL_IMR_TBDOK] = IMR_TBDOK,
343 .maps[RTL_IMR_BKDOK] = IMR_BKDOK,
344 .maps[RTL_IMR_BEDOK] = IMR_BEDOK,
345 .maps[RTL_IMR_VIDOK] = IMR_VIDOK,
346 .maps[RTL_IMR_VODOK] = IMR_VODOK,
347 .maps[RTL_IMR_ROK] = IMR_ROK,
348 .maps[RTL_IBSS_INT_MASKS] = (IMR_BCNDMAINT0 | IMR_TBDOK | IMR_TBDER),
349
350 .maps[RTL_RC_CCK_RATE1M] = DESC92C_RATE1M,
351 .maps[RTL_RC_CCK_RATE2M] = DESC92C_RATE2M,
352 .maps[RTL_RC_CCK_RATE5_5M] = DESC92C_RATE5_5M,
353 .maps[RTL_RC_CCK_RATE11M] = DESC92C_RATE11M,
354 .maps[RTL_RC_OFDM_RATE6M] = DESC92C_RATE6M,
355 .maps[RTL_RC_OFDM_RATE9M] = DESC92C_RATE9M,
356 .maps[RTL_RC_OFDM_RATE12M] = DESC92C_RATE12M,
357 .maps[RTL_RC_OFDM_RATE18M] = DESC92C_RATE18M,
358 .maps[RTL_RC_OFDM_RATE24M] = DESC92C_RATE24M,
359 .maps[RTL_RC_OFDM_RATE36M] = DESC92C_RATE36M,
360 .maps[RTL_RC_OFDM_RATE48M] = DESC92C_RATE48M,
361 .maps[RTL_RC_OFDM_RATE54M] = DESC92C_RATE54M,
362
363 .maps[RTL_RC_HT_RATEMCS7] = DESC92C_RATEMCS7,
364 .maps[RTL_RC_HT_RATEMCS15] = DESC92C_RATEMCS15,
365 };
366
367 static const struct pci_device_id rtl88ee_pci_ids[] = {
368 {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8179, rtl88ee_hal_cfg)},
369 {},
370 };
371
372 MODULE_DEVICE_TABLE(pci, rtl88ee_pci_ids);
373
374 MODULE_AUTHOR("zhiyuan_yang <zhiyuan_yang@realsil.com.cn>");
375 MODULE_AUTHOR("Realtek WlanFAE <wlanfae@realtek.com>");
376 MODULE_AUTHOR("Larry Finger <Larry.Finger@lwfinger.net>");
377 MODULE_LICENSE("GPL");
378 MODULE_DESCRIPTION("Realtek 8188E 802.11n PCI wireless");
379 MODULE_FIRMWARE("rtlwifi/rtl8188efw.bin");
380
381 module_param_named(swenc, rtl88ee_mod_params.sw_crypto, bool, 0444);
382 module_param_named(debug, rtl88ee_mod_params.debug, int, 0444);
383 module_param_named(ips, rtl88ee_mod_params.inactiveps, bool, 0444);
384 module_param_named(swlps, rtl88ee_mod_params.swctrl_lps, bool, 0444);
385 module_param_named(fwlps, rtl88ee_mod_params.fwctrl_lps, bool, 0444);
386 module_param_named(msi, rtl88ee_mod_params.msi_support, bool, 0444);
387 MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
388 MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
389 MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
390 MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
391 MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 0)\n");
392 MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
393
394 static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
395
396 static struct pci_driver rtl88ee_driver = {
397 .name = KBUILD_MODNAME,
398 .id_table = rtl88ee_pci_ids,
399 .probe = rtl_pci_probe,
400 .remove = rtl_pci_disconnect,
401 .driver.pm = &rtlwifi_pm_ops,
402 };
403
404 module_pci_driver(rtl88ee_driver);