2 * This file is part of wl1271
4 * Copyright (C) 2009 Nokia Corporation
6 * Contact: Luciano Coelho <luciano.coelho@nokia.com>
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
28 CONF_HW_BIT_RATE_1MBPS
= BIT(0),
29 CONF_HW_BIT_RATE_2MBPS
= BIT(1),
30 CONF_HW_BIT_RATE_5_5MBPS
= BIT(2),
31 CONF_HW_BIT_RATE_6MBPS
= BIT(3),
32 CONF_HW_BIT_RATE_9MBPS
= BIT(4),
33 CONF_HW_BIT_RATE_11MBPS
= BIT(5),
34 CONF_HW_BIT_RATE_12MBPS
= BIT(6),
35 CONF_HW_BIT_RATE_18MBPS
= BIT(7),
36 CONF_HW_BIT_RATE_22MBPS
= BIT(8),
37 CONF_HW_BIT_RATE_24MBPS
= BIT(9),
38 CONF_HW_BIT_RATE_36MBPS
= BIT(10),
39 CONF_HW_BIT_RATE_48MBPS
= BIT(11),
40 CONF_HW_BIT_RATE_54MBPS
= BIT(12),
41 CONF_HW_BIT_RATE_MCS_0
= BIT(13),
42 CONF_HW_BIT_RATE_MCS_1
= BIT(14),
43 CONF_HW_BIT_RATE_MCS_2
= BIT(15),
44 CONF_HW_BIT_RATE_MCS_3
= BIT(16),
45 CONF_HW_BIT_RATE_MCS_4
= BIT(17),
46 CONF_HW_BIT_RATE_MCS_5
= BIT(18),
47 CONF_HW_BIT_RATE_MCS_6
= BIT(19),
48 CONF_HW_BIT_RATE_MCS_7
= BIT(20)
52 CONF_HW_RATE_INDEX_1MBPS
= 0,
53 CONF_HW_RATE_INDEX_2MBPS
= 1,
54 CONF_HW_RATE_INDEX_5_5MBPS
= 2,
55 CONF_HW_RATE_INDEX_6MBPS
= 3,
56 CONF_HW_RATE_INDEX_9MBPS
= 4,
57 CONF_HW_RATE_INDEX_11MBPS
= 5,
58 CONF_HW_RATE_INDEX_12MBPS
= 6,
59 CONF_HW_RATE_INDEX_18MBPS
= 7,
60 CONF_HW_RATE_INDEX_22MBPS
= 8,
61 CONF_HW_RATE_INDEX_24MBPS
= 9,
62 CONF_HW_RATE_INDEX_36MBPS
= 10,
63 CONF_HW_RATE_INDEX_48MBPS
= 11,
64 CONF_HW_RATE_INDEX_54MBPS
= 12,
65 CONF_HW_RATE_INDEX_MAX
= CONF_HW_RATE_INDEX_54MBPS
,
69 CONF_HW_RXTX_RATE_MCS7
= 0,
70 CONF_HW_RXTX_RATE_MCS6
,
71 CONF_HW_RXTX_RATE_MCS5
,
72 CONF_HW_RXTX_RATE_MCS4
,
73 CONF_HW_RXTX_RATE_MCS3
,
74 CONF_HW_RXTX_RATE_MCS2
,
75 CONF_HW_RXTX_RATE_MCS1
,
76 CONF_HW_RXTX_RATE_MCS0
,
87 CONF_HW_RXTX_RATE_5_5
,
90 CONF_HW_RXTX_RATE_MAX
,
91 CONF_HW_RXTX_RATE_UNSUPPORTED
= 0xff
102 * PER threshold in PPM of the BT voice
104 * Range: 0 - 10000000
106 CONF_SG_BT_PER_THRESHOLD
= 0,
109 * Number of consequent RX_ACTIVE activities to override BT voice
110 * frames to ensure WLAN connection
114 CONF_SG_HV3_MAX_OVERRIDE
,
117 * Defines the PER threshold of the BT voice
121 CONF_SG_BT_NFS_SAMPLE_INTERVAL
,
124 * Defines the load ratio of BT
128 CONF_SG_BT_LOAD_RATIO
,
131 * Defines whether the SG will force WLAN host to enter/exit PSM
133 * Range: 1 - SG can force, 0 - host handles PSM
135 CONF_SG_AUTO_PS_MODE
,
138 * Compensation percentage of probe requests when scan initiated
139 * during BT voice/ACL link.
143 CONF_SG_AUTO_SCAN_PROBE_REQ
,
146 * Compensation percentage of probe requests when active scan initiated
151 CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3
,
154 * Defines antenna configuration (single/dual antenna)
156 * Range: 0 - single antenna, 1 - dual antenna
158 CONF_SG_ANTENNA_CONFIGURATION
,
161 * The threshold (percent) of max consequtive beacon misses before
162 * increasing priority of beacon reception.
166 CONF_SG_BEACON_MISS_PERCENT
,
169 * The rate threshold below which receiving a data frame from the AP
170 * will increase the priority of the data frame above BT traffic.
172 * Range: 0,2, 5(=5.5), 6, 9, 11, 12, 18, 24, 36, 48, 54
174 CONF_SG_RATE_ADAPT_THRESH
,
177 * Not used currently.
181 CONF_SG_RATE_ADAPT_SNR
,
184 * Configure the min and max time BT gains the antenna
185 * in WLAN PSM / BT master basic rate
187 * Range: 0 - 255 (ms)
189 CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR
,
190 CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR
,
193 * The time after it expires no new WLAN trigger frame is trasmitted
194 * in WLAN PSM / BT master basic rate
196 * Range: 0 - 255 (ms)
198 CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR
,
201 * Configure the min and max time BT gains the antenna
202 * in WLAN PSM / BT slave basic rate
204 * Range: 0 - 255 (ms)
206 CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR
,
207 CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR
,
210 * The time after it expires no new WLAN trigger frame is trasmitted
211 * in WLAN PSM / BT slave basic rate
213 * Range: 0 - 255 (ms)
215 CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR
,
218 * Configure the min and max time BT gains the antenna
219 * in WLAN PSM / BT master EDR
221 * Range: 0 - 255 (ms)
223 CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR
,
224 CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR
,
227 * The time after it expires no new WLAN trigger frame is trasmitted
228 * in WLAN PSM / BT master EDR
230 * Range: 0 - 255 (ms)
232 CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR
,
235 * Configure the min and max time BT gains the antenna
236 * in WLAN PSM / BT slave EDR
238 * Range: 0 - 255 (ms)
240 CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR
,
241 CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR
,
244 * The time after it expires no new WLAN trigger frame is trasmitted
245 * in WLAN PSM / BT slave EDR
247 * Range: 0 - 255 (ms)
249 CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR
,
252 * RX guard time before the beginning of a new BT voice frame during
253 * which no new WLAN trigger frame is transmitted.
255 * Range: 0 - 100000 (us)
260 * TX guard time before the beginning of a new BT voice frame during
261 * which no new WLAN frame is transmitted.
263 * Range: 0 - 100000 (us)
269 * Enable adaptive RXT/TXT algorithm. If disabled, the host values
272 * Range: 0 - disable, 1 - enable
274 CONF_SG_ADAPTIVE_RXT_TXT
,
277 * The used WLAN legacy service period during active BT ACL link
279 * Range: 0 - 255 (ms)
281 CONF_SG_PS_POLL_TIMEOUT
,
284 * The used WLAN UPSD service period during active BT ACL link
286 * Range: 0 - 255 (ms)
288 CONF_SG_UPSD_TIMEOUT
,
291 * Configure the min and max time BT gains the antenna
292 * in WLAN Active / BT master EDR
294 * Range: 0 - 255 (ms)
296 CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR
,
297 CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR
,
300 * The maximum time WLAN can gain the antenna for
301 * in WLAN Active / BT master EDR
303 * Range: 0 - 255 (ms)
305 CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR
,
308 * Configure the min and max time BT gains the antenna
309 * in WLAN Active / BT slave EDR
311 * Range: 0 - 255 (ms)
313 CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR
,
314 CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR
,
317 * The maximum time WLAN can gain the antenna for
318 * in WLAN Active / BT slave EDR
320 * Range: 0 - 255 (ms)
322 CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR
,
325 * Configure the min and max time BT gains the antenna
326 * in WLAN Active / BT basic rate
328 * Range: 0 - 255 (ms)
330 CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR
,
331 CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR
,
334 * The maximum time WLAN can gain the antenna for
335 * in WLAN Active / BT basic rate
337 * Range: 0 - 255 (ms)
339 CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR
,
342 * Compensation percentage of WLAN passive scan window if initiated
345 * Range: 0 - 1000 (%)
347 CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3
,
350 * Compensation percentage of WLAN passive scan window if initiated
353 * Range: 0 - 1000 (%)
355 CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP
,
358 * Fixed time ensured for BT traffic to gain the antenna during WLAN
363 CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME
,
366 * Fixed time ensured for WLAN traffic to gain the antenna during WLAN
371 CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME
,
374 * Number of consequent BT voice frames not interrupted by WLAN
378 CONF_SG_HV3_MAX_SERVED
,
381 * Protection time of the DHCP procedure.
383 * Range: 0 - 100000 (ms)
388 * Compensation percentage of WLAN active scan window if initiated
391 * Range: 0 - 1000 (%)
393 CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP
,
394 CONF_SG_TEMP_PARAM_1
,
395 CONF_SG_TEMP_PARAM_2
,
396 CONF_SG_TEMP_PARAM_3
,
397 CONF_SG_TEMP_PARAM_4
,
398 CONF_SG_TEMP_PARAM_5
,
400 CONF_SG_PARAMS_ALL
= 0xff
403 struct conf_sg_settings
{
404 u32 params
[CONF_SG_PARAMS_MAX
];
408 enum conf_rx_queue_type
{
409 CONF_RX_QUEUE_TYPE_LOW_PRIORITY
, /* All except the high priority */
410 CONF_RX_QUEUE_TYPE_HIGH_PRIORITY
, /* Management and voice packets */
413 struct conf_rx_settings
{
415 * The maximum amount of time, in TU, before the
416 * firmware discards the MSDU.
418 * Range: 0 - 0xFFFFFFFF
420 u32 rx_msdu_life_time
;
423 * Packet detection threshold in the PHY.
425 * FIXME: details unknown.
427 u32 packet_detection_threshold
;
430 * The longest time the STA will wait to receive traffic from the AP
431 * after a PS-poll has been transmitted.
437 * The longest time the STA will wait to receive traffic from the AP
438 * after a frame has been sent from an UPSD enabled queue.
445 * The number of octets in an MPDU, below which an RTS/CTS
446 * handshake is not performed.
453 * The RX Clear Channel Assessment threshold in the PHY
454 * (the energy threshold).
456 * Range: ENABLE_ENERGY_D == 0x140A
457 * DISABLE_ENERGY_D == 0xFFEF
459 u16 rx_cca_threshold
;
462 * Occupied Rx mem-blocks number which requires interrupting the host
463 * (0 = no buffering, 0xffff = disabled).
467 u16 irq_blk_threshold
;
470 * Rx packets number which requires interrupting the host
471 * (0 = no buffering).
475 u16 irq_pkt_threshold
;
478 * Max time in msec the FW may delay RX-Complete interrupt.
487 * Range: RX_QUEUE_TYPE_RX_LOW_PRIORITY, RX_QUEUE_TYPE_RX_HIGH_PRIORITY,
492 #define CONF_TX_MAX_RATE_CLASSES 8
494 #define CONF_TX_RATE_MASK_UNSPECIFIED 0
495 #define CONF_TX_RATE_MASK_BASIC (CONF_HW_BIT_RATE_1MBPS | \
496 CONF_HW_BIT_RATE_2MBPS)
497 #define CONF_TX_RATE_RETRY_LIMIT 10
500 * Rates supported for data packets when operating as AP. Note the absense
501 * of the 22Mbps rate. There is a FW limitation on 12 rates so we must drop
502 * one. The rate dropped is not mandatory under any operating mode.
504 #define CONF_TX_AP_ENABLED_RATES (CONF_HW_BIT_RATE_1MBPS | \
505 CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \
506 CONF_HW_BIT_RATE_6MBPS | CONF_HW_BIT_RATE_9MBPS | \
507 CONF_HW_BIT_RATE_11MBPS | CONF_HW_BIT_RATE_12MBPS | \
508 CONF_HW_BIT_RATE_18MBPS | CONF_HW_BIT_RATE_24MBPS | \
509 CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \
510 CONF_HW_BIT_RATE_54MBPS)
513 * Default rates for management traffic when operating in AP mode. This
514 * should be configured according to the basic rate set of the AP
516 #define CONF_TX_AP_DEFAULT_MGMT_RATES (CONF_HW_BIT_RATE_1MBPS | \
517 CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS)
519 struct conf_tx_rate_class
{
522 * The rates enabled for this rate class.
524 * Range: CONF_HW_BIT_RATE_* bit mask
529 * The dot11 short retry limit used for TX retries.
533 u8 short_retry_limit
;
536 * The dot11 long retry limit used for TX retries.
543 * Flags controlling the attributes of TX transmission.
545 * Range: bit 0: Truncate - when set, FW attempts to send a frame stop
546 * when the total valid per-rate attempts have
547 * been exhausted; otherwise transmissions
548 * will continue at the lowest available rate
549 * until the appropriate one of the
550 * short_retry_limit, long_retry_limit,
551 * dot11_max_transmit_msdu_life_time, or
552 * max_tx_life_time, is exhausted.
553 * 1: Preamble Override - indicates if the preamble type
554 * should be used in TX.
555 * 2: Preamble Type - the type of the preamble to be used by
556 * the policy (0 - long preamble, 1 - short preamble.
561 #define CONF_TX_MAX_AC_COUNT 4
563 /* Slot number setting to start transmission at PIFS interval */
564 #define CONF_TX_AIFS_PIFS 1
565 /* Slot number setting to start transmission at DIFS interval normal
567 #define CONF_TX_AIFS_DIFS 2
571 CONF_TX_AC_BE
= 0, /* best effort / legacy */
572 CONF_TX_AC_BK
= 1, /* background */
573 CONF_TX_AC_VI
= 2, /* video */
574 CONF_TX_AC_VO
= 3, /* voice */
575 CONF_TX_AC_CTS2SELF
= 4, /* fictious AC, follows AC_VO */
576 CONF_TX_AC_ANY_TID
= 0x1f
579 struct conf_tx_ac_category
{
581 * The AC class identifier.
583 * Range: enum conf_tx_ac
588 * The contention window minimum size (in slots) for the access
596 * The contention window maximum size (in slots) for the access
604 * The AIF value (in slots) for the access class.
611 * The TX Op Limit (in microseconds) for the access class.
618 #define CONF_TX_MAX_TID_COUNT 8
621 CONF_CHANNEL_TYPE_DCF
= 0, /* DC/LEGACY*/
622 CONF_CHANNEL_TYPE_EDCF
= 1, /* EDCA*/
623 CONF_CHANNEL_TYPE_HCCA
= 2, /* HCCA*/
627 CONF_PS_SCHEME_LEGACY
= 0,
628 CONF_PS_SCHEME_UPSD_TRIGGER
= 1,
629 CONF_PS_SCHEME_LEGACY_PSPOLL
= 2,
630 CONF_PS_SCHEME_SAPSD
= 3,
634 CONF_ACK_POLICY_LEGACY
= 0,
635 CONF_ACK_POLICY_NO_ACK
= 1,
636 CONF_ACK_POLICY_BLOCK
= 2,
649 struct conf_tx_settings
{
651 * The TX ED value for TELEC Enable/Disable.
655 u8 tx_energy_detection
;
658 * Configuration for rate classes for TX (currently only one
659 * rate class supported). Used in non-AP mode.
661 struct conf_tx_rate_class sta_rc_conf
;
664 * Configuration for access categories for TX rate control.
667 struct conf_tx_ac_category ac_conf
[CONF_TX_MAX_AC_COUNT
];
670 * Configuration for rate classes in AP-mode. These rate classes
671 * are for the AC TX queues
673 struct conf_tx_rate_class ap_rc_conf
[CONF_TX_MAX_AC_COUNT
];
676 * Management TX rate class for AP-mode.
678 struct conf_tx_rate_class ap_mgmt_conf
;
681 * Broadcast TX rate class for AP-mode.
683 struct conf_tx_rate_class ap_bcst_conf
;
686 * AP-mode - allow this number of TX retries to a station before an
687 * event is triggered from FW.
689 u16 ap_max_tx_retries
;
692 * Configuration for TID parameters.
695 struct conf_tx_tid tid_conf
[CONF_TX_MAX_TID_COUNT
];
698 * The TX fragmentation threshold.
705 * Max time in msec the FW may delay frame TX-Complete interrupt.
709 u16 tx_compl_timeout
;
712 * Completed TX packet count which requires to issue the TX-Complete
717 u16 tx_compl_threshold
;
720 * The rate used for control messages and scanning on the 2.4GHz band
722 * Range: CONF_HW_BIT_RATE_* bit mask
727 * The rate used for control messages and scanning on the 5GHz band
729 * Range: CONF_HW_BIT_RATE_* bit mask
734 * TX retry limits for templates
736 u8 tmpl_short_retry_limit
;
737 u8 tmpl_long_retry_limit
;
741 CONF_WAKE_UP_EVENT_BEACON
= 0x01, /* Wake on every Beacon*/
742 CONF_WAKE_UP_EVENT_DTIM
= 0x02, /* Wake on every DTIM*/
743 CONF_WAKE_UP_EVENT_N_DTIM
= 0x04, /* Wake every Nth DTIM */
744 CONF_WAKE_UP_EVENT_N_BEACONS
= 0x08, /* Wake every Nth beacon */
745 CONF_WAKE_UP_EVENT_BITS_MASK
= 0x0F
748 #define CONF_MAX_BCN_FILT_IE_COUNT 32
750 #define CONF_BCN_RULE_PASS_ON_CHANGE BIT(0)
751 #define CONF_BCN_RULE_PASS_ON_APPEARANCE BIT(1)
753 #define CONF_BCN_IE_OUI_LEN 3
754 #define CONF_BCN_IE_VER_LEN 2
756 struct conf_bcn_filt_rule
{
758 * IE number to which to associate a rule.
765 * Rule to associate with the specific ie.
767 * Range: CONF_BCN_RULE_PASS_ON_*
772 * OUI for the vendor specifie IE (221)
774 u8 oui
[CONF_BCN_IE_OUI_LEN
];
777 * Type for the vendor specifie IE (221)
782 * Version for the vendor specifie IE (221)
784 u8 version
[CONF_BCN_IE_VER_LEN
];
787 #define CONF_MAX_RSSI_SNR_TRIGGERS 8
790 CONF_TRIG_METRIC_RSSI_BEACON
= 0,
791 CONF_TRIG_METRIC_RSSI_DATA
,
792 CONF_TRIG_METRIC_SNR_BEACON
,
793 CONF_TRIG_METRIC_SNR_DATA
797 CONF_TRIG_EVENT_TYPE_LEVEL
= 0,
798 CONF_TRIG_EVENT_TYPE_EDGE
802 CONF_TRIG_EVENT_DIR_LOW
= 0,
803 CONF_TRIG_EVENT_DIR_HIGH
,
804 CONF_TRIG_EVENT_DIR_BIDIR
807 struct conf_sig_weights
{
810 * RSSI from beacons average weight.
814 u8 rssi_bcn_avg_weight
;
817 * RSSI from data average weight.
821 u8 rssi_pkt_avg_weight
;
824 * SNR from beacons average weight.
828 u8 snr_bcn_avg_weight
;
831 * SNR from data average weight.
835 u8 snr_pkt_avg_weight
;
838 enum conf_bcn_filt_mode
{
839 CONF_BCN_FILT_MODE_DISABLED
= 0,
840 CONF_BCN_FILT_MODE_ENABLED
= 1
844 CONF_BET_MODE_DISABLE
= 0,
845 CONF_BET_MODE_ENABLE
= 1,
848 struct conf_conn_settings
{
850 * Firmware wakeup conditions configuration. The host may set only
853 * Range: CONF_WAKE_UP_EVENT_*
858 * Listen interval for beacons or Dtims.
860 * Range: 0 for beacon and Dtim wakeup
862 * 1-255 for x beacons
867 * Enable or disable the beacon filtering.
869 * Range: CONF_BCN_FILT_MODE_*
871 enum conf_bcn_filt_mode bcn_filt_mode
;
874 * Configure Beacon filter pass-thru rules.
876 u8 bcn_filt_ie_count
;
877 struct conf_bcn_filt_rule bcn_filt_ie
[CONF_MAX_BCN_FILT_IE_COUNT
];
880 * The number of consequtive beacons to lose, before the firmware
881 * becomes out of synch.
885 u32 synch_fail_thold
;
888 * After out-of-synch, the number of TU's to wait without a further
889 * received beacon (or probe response) before issuing the BSS_EVENT_LOSE
894 u32 bss_lose_timeout
;
897 * Beacon receive timeout.
901 u32 beacon_rx_timeout
;
904 * Broadcast receive timeout.
908 u32 broadcast_timeout
;
911 * Enable/disable reception of broadcast packets in power save mode
913 * Range: 1 - enable, 0 - disable
915 u8 rx_broadcast_in_ps
;
918 * Consequtive PS Poll failures before sending event to driver
922 u8 ps_poll_threshold
;
925 * PS Poll failure recovery ACTIVE period length
929 u32 ps_poll_recovery_period
;
932 * Configuration of signal average weights.
934 struct conf_sig_weights sig_weights
;
937 * Specifies if beacon early termination procedure is enabled or
940 * Range: CONF_BET_MODE_*
945 * Specifies the maximum number of consecutive beacons that may be
946 * early terminated. After this number is reached at least one full
947 * beacon must be correctly received in FW before beacon ET
952 u8 bet_max_consecutive
;
955 * Specifies the maximum number of times to try PSM entry if it fails
956 * (if sending the appropriate null-func message fails.)
960 u8 psm_entry_retries
;
963 * Specifies the maximum number of times to try transmit the PSM entry
964 * null-func frame for each PSM entry attempt
968 u8 psm_entry_nullfunc_retries
;
971 * Specifies the time to linger in active mode after successfully
972 * transmitting the PSM entry null-func frame.
976 u8 psm_entry_hangover_period
;
980 * Specifies the interval of the connection keep-alive null-func
983 * Range: 1000 - 3600000
985 u32 keep_alive_interval
;
988 * Maximum listen interval supported by the driver in units of beacons.
992 u8 max_listen_interval
;
1002 enum single_dual_band_enum
{
1007 #define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15
1008 #define CONF_NUMBER_OF_SUB_BANDS_5 7
1009 #define CONF_NUMBER_OF_RATE_GROUPS 6
1010 #define CONF_NUMBER_OF_CHANNELS_2_4 14
1011 #define CONF_NUMBER_OF_CHANNELS_5 35
1013 struct conf_radio_parms
{
1015 * FEM parameter set to use
1022 struct conf_itrim_settings
{
1023 /* enable dco itrim */
1026 /* moderation timeout in microsecs from the last TX */
1030 struct conf_pm_config_settings
{
1032 * Host clock settling time
1034 * Range: 0 - 30000 us
1036 u32 host_clk_settling_time
;
1039 * Host fast wakeup support
1041 * Range: true, false
1043 bool host_fast_wakeup_support
;
1046 struct conf_roam_trigger_settings
{
1048 * The minimum interval between two trigger events.
1050 * Range: 0 - 60000 ms
1055 * The weight for rssi/beacon average calculation
1059 u8 avg_weight_rssi_beacon
;
1062 * The weight for rssi/data frame average calculation
1066 u8 avg_weight_rssi_data
;
1069 * The weight for snr/beacon average calculation
1073 u8 avg_weight_snr_beacon
;
1076 * The weight for snr/data frame average calculation
1080 u8 avg_weight_snr_data
;
1083 struct conf_scan_settings
{
1085 * The minimum time to wait on each channel for active scans
1087 * Range: u32 tu/1000
1089 u32 min_dwell_time_active
;
1092 * The maximum time to wait on each channel for active scans
1094 * Range: u32 tu/1000
1096 u32 max_dwell_time_active
;
1099 * The minimum time to wait on each channel for passive scans
1101 * Range: u32 tu/1000
1103 u32 min_dwell_time_passive
;
1106 * The maximum time to wait on each channel for passive scans
1108 * Range: u32 tu/1000
1110 u32 max_dwell_time_passive
;
1113 * Number of probe requests to transmit on each active scan channel
1121 /* these are number of channels on the band divided by two, rounded up */
1122 #define CONF_TX_PWR_COMPENSATION_LEN_2 7
1123 #define CONF_TX_PWR_COMPENSATION_LEN_5 18
1125 struct conf_rf_settings
{
1127 * Per channel power compensation for 2.4GHz
1131 u8 tx_per_channel_power_compensation_2
[CONF_TX_PWR_COMPENSATION_LEN_2
];
1134 * Per channel power compensation for 5GHz
1138 u8 tx_per_channel_power_compensation_5
[CONF_TX_PWR_COMPENSATION_LEN_5
];
1141 struct conf_ht_setting
{
1143 u16 inactivity_timeout
;
1146 struct conf_drv_settings
{
1147 struct conf_sg_settings sg
;
1148 struct conf_rx_settings rx
;
1149 struct conf_tx_settings tx
;
1150 struct conf_conn_settings conn
;
1151 struct conf_itrim_settings itrim
;
1152 struct conf_pm_config_settings pm_config
;
1153 struct conf_roam_trigger_settings roam_trigger
;
1154 struct conf_scan_settings scan
;
1155 struct conf_rf_settings rf
;
1156 struct conf_ht_setting ht
;