2 # PCCARD (PCMCIA/CardBus) bus subsystem configuration
6 tristate "PCCard (PCMCIA/CardBus) support"
9 Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
10 computer. These are credit-card size devices such as network cards,
11 modems or hard drives often used with laptops computers. There are
12 actually two varieties of these cards: 16 bit PCMCIA and 32 bit
15 To compile this driver as modules, choose M here: the
16 module will be called pcmcia_core.
21 tristate "16-bit PCMCIA support"
25 This option enables support for 16-bit PCMCIA cards. Most older
26 PC-cards are such 16-bit PCMCIA cards, so unless you know you're
27 only using 32-bit CardBus cards, say Y or M here.
29 To use 16-bit PCMCIA cards, you will need supporting software in
30 most cases. (see the file <file:Documentation/Changes> for
31 location and details).
33 To compile this driver as modules, choose M here: the
34 module will be called pcmcia.
38 config PCMCIA_LOAD_CIS
39 bool "Load CIS updates from userspace (EXPERIMENTAL)"
40 depends on PCMCIA && EXPERIMENTAL
44 Some PCMCIA cards require an updated Card Information Structure (CIS)
45 to be loaded from userspace to work correctly. If you say Y here,
46 and your userspace is arranged correctly, this will be loaded
47 automatically using the in-kernel firmware loader and the hotplug
48 subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
53 bool "PCMCIA control ioctl (obsolete)"
57 If you say Y here, the deprecated ioctl interface to the PCMCIA
58 subsystem will be built. It is needed by cardmgr and cardctl
59 (pcmcia-cs) to function properly.
61 You should use the new pcmciautils package instead (see
62 <file:Documentation/Changes> for location and details).
67 bool "32-bit CardBus support"
71 CardBus is a bus mastering architecture for PC-cards, which allows
72 for 32 bit PC-cards (the original PCMCIA standard specifies only
73 a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
75 To use 32 bit PC-cards, you also need a CardBus compatible host
76 bridge. Virtually all modern PCMCIA bridges do this, and most of
77 them are "yenta-compatible", so say Y or M there, too.
81 comment "PC-card bridges"
84 tristate "CardBus yenta-compatible bridge support"
86 select CARDBUS if !EMBEDDED
87 select PCCARD_NONSTATIC
89 This option enables support for CardBus host bridges. Virtually
90 all modern PCMCIA bridges are CardBus compatible. A "bridge" is
91 the hardware inside your computer that PCMCIA cards are plugged
94 To compile this driver as modules, choose M here: the
95 module will be called yenta_socket.
101 bool "Special initialization for O2Micro bridges" if EMBEDDED
106 bool "Special initialization for Ricoh bridges" if EMBEDDED
111 bool "Special initialization for TI and EnE bridges" if EMBEDDED
114 config YENTA_ENE_TUNE
116 bool "Auto-tune EnE bridges for CB cards" if EMBEDDED
117 depends on YENTA_TI && CARDBUS
121 bool "Special initialization for Toshiba ToPIC bridges" if EMBEDDED
125 tristate "Cirrus PD6729 compatible bridge support"
126 depends on PCMCIA && PCI
127 select PCCARD_NONSTATIC
129 This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
130 device, found in some older laptops and PCMCIA card readers.
133 tristate "i82092 compatible bridge support"
134 depends on PCMCIA && PCI
135 select PCCARD_NONSTATIC
137 This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
138 found in some older laptops and more commonly in evaluation boards for the
142 tristate "i82365 compatible bridge support"
143 depends on PCMCIA && ISA
144 select PCCARD_NONSTATIC
146 Say Y here to include support for ISA-bus PCMCIA host bridges that
147 are register compatible with the Intel i82365. These are found on
148 older laptops and ISA-bus card readers for desktop systems. A
149 "bridge" is the hardware inside your computer that PCMCIA cards are
150 plugged into. If unsure, say N.
153 tristate "Databook TCIC host bridge support"
154 depends on PCMCIA && ISA
155 select PCCARD_NONSTATIC
157 Say Y here to include support for the Databook TCIC family of PCMCIA
158 host bridges. These are only found on a handful of old systems.
159 "Bridge" is the name used for the hardware inside your computer that
160 PCMCIA cards are plugged into. If unsure, say N.
163 tristate "MPC8xx PCMCIA support"
164 depends on PCMCIA && PPC && 8xx
166 select PCCARD_NONSTATIC
168 Say Y here to include support for PowerPC 8xx series PCMCIA
171 This driver is also available as a module called m8xx_pcmcia.
174 tristate "Au1x00 pcmcia support"
175 depends on SOC_AU1X00 && PCMCIA
177 config PCMCIA_BCM63XX
178 tristate "bcm63xx pcmcia support"
179 depends on BCM63XX && PCMCIA
182 tristate "SA1100 support"
183 depends on ARM && ARCH_SA1100 && PCMCIA
185 Say Y here to include support for SA11x0-based PCMCIA or CF
186 sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
187 Xscale(R) embedded machines.
189 This driver is also available as a module called sa1100_cs.
192 tristate "SA1111 support"
193 depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
195 Say Y here to include support for SA1111-based PCMCIA or CF
196 sockets, found on the Jornada 720, Graphicsmaster and other
197 StrongARM(R)/Xscale(R) embedded machines.
199 This driver is also available as a module called sa1111_cs.
202 tristate "PXA2xx support"
203 depends on ARM && ARCH_PXA && PCMCIA
204 depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
205 || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
206 || ARCH_VIPER || ARCH_PXA_ESERIES || MACH_STARGATE2)
208 Say Y here to include support for the PXA2xx PCMCIA controller
211 bool "Enable debugging"
212 depends on (PCMCIA_SA1111 || PCMCIA_SA1100 || PCMCIA_PXA2XX)
214 Say Y here to enable debugging for the SoC PCMCIA layer.
215 You will need to choose the debugging level either via the
216 kernel command line, or module options depending whether
217 you build the drivers as modules.
219 The kernel command line options are:
220 sa11xx_core.pc_debug=N
221 pxa2xx_core.pc_debug=N
223 The module option is called pc_debug=N
225 In all the above examples, N is the debugging verbosity
230 default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X && !PARISC
233 bool "M32R PCMCIA I/F"
234 depends on M32R && CHIP_M32700 && PCMCIA
235 select PCCARD_NONSTATIC
237 Say Y here to use the M32R PCMCIA controller.
240 bool "M32R CF I/F Controller"
241 depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
242 select PCCARD_NONSTATIC
244 Say Y here to use the M32R CompactFlash controller.
247 int "M32R CF I/F number"
249 default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
251 Set the number of M32R CF slots.
253 config PCMCIA_VRC4171
254 tristate "NEC VRC4171 Card Controllers support"
255 depends on CPU_VR41XX && ISA && PCMCIA
257 config PCMCIA_VRC4173
258 tristate "NEC VRC4173 CARDU support"
259 depends on CPU_VR41XX && PCI && PCMCIA
262 tristate "OMAP CompactFlash Controller"
263 depends on PCMCIA && ARCH_OMAP16XX
265 Say Y here to support the CompactFlash controller on OMAP.
266 Note that this doesn't support "True IDE" mode.
269 tristate "Blackfin CompactFlash PCMCIA Driver"
270 depends on PCMCIA && BLACKFIN
272 Say Y here to support the CompactFlash PCMCIA driver for Blackfin.
276 tristate "AT91 CompactFlash Controller"
277 depends on PCMCIA && ARCH_AT91RM9200
279 Say Y here to support the CompactFlash controller on AT91 chips.
280 Or choose M to compile the driver as a module named "at91_cf".
283 tristate "Electra CompactFlash Controller"
284 depends on PCMCIA && PPC_PASEMI
286 Say Y here to support the CompactFlash controller on the
287 PA Semi Electra eval board.
289 config PCCARD_NONSTATIC