drivers/pcmcia/Kconfig

   1 #
   2 # PCCARD (PCMCIA/CardBus) bus subsystem configuration
   3 #
   4
   5 menuconfig PCCARD
   6         tristate "PCCard (PCMCIA/CardBus) support"
   7         ---help---
   8           Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
   9           computer.  These are credit-card size devices such as network cards,
  10           modems or hard drives often used with laptops computers.  There are
  11           actually two varieties of these cards: 16 bit PCMCIA and 32 bit
  12           CardBus cards.
  13
  14           To compile this driver as modules, choose M here: the
  15           module will be called pcmcia_core.
  16
  17 if PCCARD
  18
  19 config PCMCIA
  20         tristate "16-bit PCMCIA support"
  21         select CRC32
  22         default y
  23         ---help---
  24            This option enables support for 16-bit PCMCIA cards. Most older
  25            PC-cards are such 16-bit PCMCIA cards, so unless you know you're
  26            only using 32-bit CardBus cards, say Y or M here.
  27
  28            To use 16-bit PCMCIA cards, you will need supporting software in
  29            most cases. (see the file <file:Documentation/Changes> for
  30            location and details).
  31
  32            To compile this driver as modules, choose M here: the
  33            module will be called pcmcia.
  34
  35            If unsure, say Y.
  36
  37 config PCMCIA_LOAD_CIS
  38         bool "Load CIS updates from userspace"
  39         depends on PCMCIA
  40         select FW_LOADER
  41         default y
  42         help
  43           Some PCMCIA cards require an updated Card Information Structure (CIS)
  44           to be loaded from userspace to work correctly. If you say Y here,
  45           and your userspace is arranged correctly, this will be loaded
  46           automatically using the in-kernel firmware loader and the hotplug
  47           subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
  48
  49           If unsure, say Y.
  50
  51 config CARDBUS
  52         bool "32-bit CardBus support"
  53         depends on PCI
  54         default y
  55         ---help---
  56           CardBus is a bus mastering architecture for PC-cards, which allows
  57           for 32 bit PC-cards (the original PCMCIA standard specifies only
  58           a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
  59
  60           To use 32 bit PC-cards, you also need a CardBus compatible host
  61           bridge. Virtually all modern PCMCIA bridges do this, and most of
  62           them are "yenta-compatible", so say Y or M there, too.
  63
  64           If unsure, say Y.
  65
  66 comment "PC-card bridges"
  67
  68 config YENTA
  69         tristate "CardBus yenta-compatible bridge support"
  70         depends on PCI
  71         select CARDBUS if !EXPERT
  72         select PCCARD_NONSTATIC if PCMCIA != n
  73         ---help---
  74           This option enables support for CardBus host bridges.  Virtually
  75           all modern PCMCIA bridges are CardBus compatible.  A "bridge" is
  76           the hardware inside your computer that PCMCIA cards are plugged
  77           into.
  78
  79           To compile this driver as modules, choose M here: the
  80           module will be called yenta_socket.
  81
  82           If unsure, say Y.
  83
  84 config YENTA_O2
  85         default y
  86         bool "Special initialization for O2Micro bridges" if EXPERT
  87         depends on YENTA
  88
  89 config YENTA_RICOH
  90         default y
  91         bool "Special initialization for Ricoh bridges" if EXPERT
  92         depends on YENTA
  93
  94 config YENTA_TI
  95         default y
  96         bool "Special initialization for TI and EnE bridges" if EXPERT
  97         depends on YENTA
  98
  99 config YENTA_ENE_TUNE
 100         default y
 101         bool "Auto-tune EnE bridges for CB cards" if EXPERT
 102         depends on YENTA_TI && CARDBUS
 103
 104 config YENTA_TOSHIBA
 105         default y
 106         bool "Special initialization for Toshiba ToPIC bridges" if EXPERT
 107         depends on YENTA
 108
 109 config PD6729
 110         tristate "Cirrus PD6729 compatible bridge support"
 111         depends on PCMCIA && PCI
 112         select PCCARD_NONSTATIC
 113         help
 114           This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
 115           device, found in some older laptops and PCMCIA card readers.
 116
 117 config I82092
 118         tristate "i82092 compatible bridge support"
 119         depends on PCMCIA && PCI
 120         select PCCARD_NONSTATIC
 121         help
 122           This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
 123           found in some older laptops and more commonly in evaluation boards for the
 124           chip.
 125
 126 config I82365
 127         tristate "i82365 compatible bridge support"
 128         depends on PCMCIA && ISA
 129         select PCCARD_NONSTATIC
 130         help
 131           Say Y here to include support for ISA-bus PCMCIA host bridges that
 132           are register compatible with the Intel i82365.  These are found on
 133           older laptops and ISA-bus card readers for desktop systems.  A
 134           "bridge" is the hardware inside your computer that PCMCIA cards are
 135           plugged into. If unsure, say N.
 136
 137 config TCIC
 138         tristate "Databook TCIC host bridge support"
 139         depends on PCMCIA && ISA
 140         select PCCARD_NONSTATIC
 141         help
 142           Say Y here to include support for the Databook TCIC family of PCMCIA
 143           host bridges. These are only found on a handful of old systems.
 144           "Bridge" is the name used for the hardware inside your computer that
 145           PCMCIA cards are plugged into. If unsure, say N.
 146
 147 config PCMCIA_M8XX
 148         tristate "MPC8xx PCMCIA support"
 149         depends on PCCARD && PPC && 8xx
 150         select PCCARD_IODYN if PCMCIA != n
 151         help
 152           Say Y here to include support for PowerPC 8xx series PCMCIA
 153           controller.
 154
 155           This driver is also available as a module called m8xx_pcmcia.
 156
 157 config PCMCIA_ALCHEMY_DEVBOARD
 158         tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
 159         depends on MIPS_ALCHEMY && PCMCIA
 160         select 64BIT_PHYS_ADDR
 161         help
 162           Enable this driver of you want PCMCIA support on your Alchemy
 163           Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200, DB1300
 164           board.  NOT suitable for the PB1000!
 165
 166           This driver is also available as a module called db1xxx_ss.ko
 167
 168 config PCMCIA_XXS1500
 169         tristate "MyCable XXS1500 PCMCIA socket support"
 170         depends on PCMCIA && MIPS_XXS1500
 171         select 64BIT_PHYS_ADDR
 172         help
 173           Support for the PCMCIA/CF socket interface on MyCable XXS1500
 174           systems.
 175
 176           This driver is also available as a module called xxs1500_ss.ko
 177
 178 config PCMCIA_BCM63XX
 179         tristate "bcm63xx pcmcia support"
 180         depends on BCM63XX && PCMCIA
 181
 182 config PCMCIA_SOC_COMMON
 183         tristate
 184
 185 config PCMCIA_SA11XX_BASE
 186         tristate
 187
 188 config PCMCIA_SA1100
 189         tristate "SA1100 support"
 190         depends on ARM && ARCH_SA1100 && PCMCIA
 191         select PCMCIA_SOC_COMMON
 192         select PCMCIA_SA11XX_BASE
 193         help
 194           Say Y here to include support for SA11x0-based PCMCIA or CF
 195           sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
 196           Xscale(R) embedded machines.
 197
 198           This driver is also available as a module called sa1100_cs.
 199
 200 config PCMCIA_SA1111
 201         tristate "SA1111 support"
 202         depends on ARM && SA1111 && PCMCIA
 203         select PCMCIA_SOC_COMMON
 204         select PCMCIA_SA11XX_BASE if ARCH_SA1100
 205         help
 206           Say Y  here to include support for SA1111-based PCMCIA or CF
 207           sockets, found on the Jornada 720, Graphicsmaster and other
 208           StrongARM(R)/Xscale(R) embedded machines.
 209
 210           This driver is also available as a module called sa1111_cs.
 211
 212 config PCMCIA_PXA2XX
 213         tristate "PXA2xx support"
 214         depends on ARM && ARCH_PXA && PCMCIA
 215         depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
 216                     || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
 217                     || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
 218                     || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
 219                     || MACH_COLIBRI320 || MACH_H4700)
 220         select PCMCIA_SA1111 if ARCH_LUBBOCK && SA1111
 221         select PCMCIA_SOC_COMMON
 222         help
 223           Say Y here to include support for the PXA2xx PCMCIA controller
 224
 225 config PCMCIA_DEBUG
 226         bool "Enable debugging"
 227         depends on (PCMCIA_SA1111 || PCMCIA_SA1100 || PCMCIA_PXA2XX)
 228         help
 229           Say Y here to enable debugging for the SoC PCMCIA layer.
 230           You will need to choose the debugging level either via the
 231           kernel command line, or module options depending whether
 232           you build the drivers as modules.
 233
 234           The kernel command line options are:
 235             sa11xx_core.pc_debug=N
 236             pxa2xx_core.pc_debug=N
 237
 238           The module option is called pc_debug=N
 239
 240           In all the above examples, N is the debugging verbosity
 241           level.
 242
 243 config PCMCIA_PROBE
 244         bool
 245         default y if ISA && !ARCH_SA1100 && !PARISC
 246
 247 config M32R_PCC
 248         bool "M32R PCMCIA I/F"
 249         depends on M32R && CHIP_M32700 && PCMCIA
 250         help
 251           Say Y here to use the M32R PCMCIA controller.
 252
 253 config M32R_CFC
 254         bool "M32R CF I/F Controller"
 255         depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
 256         help
 257           Say Y here to use the M32R CompactFlash controller.
 258
 259 config M32R_CFC_NUM
 260         int "M32R CF I/F number"
 261         depends on M32R_CFC
 262         default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
 263         help
 264           Set the number of M32R CF slots.
 265
 266 config PCMCIA_VRC4171
 267         tristate "NEC VRC4171 Card Controllers support"
 268         depends on CPU_VR41XX && ISA && PCMCIA
 269
 270 config PCMCIA_VRC4173
 271         tristate "NEC VRC4173 CARDU support"
 272         depends on CPU_VR41XX && PCI && PCMCIA
 273
 274 config OMAP_CF
 275         tristate "OMAP CompactFlash Controller"
 276         depends on PCMCIA && ARCH_OMAP16XX
 277         help
 278           Say Y here to support the CompactFlash controller on OMAP.
 279           Note that this doesn't support "True IDE" mode.
 280
 281 config BFIN_CFPCMCIA
 282         tristate "Blackfin CompactFlash PCMCIA Driver"
 283         depends on PCMCIA && BLACKFIN
 284         help
 285           Say Y here to support the CompactFlash PCMCIA driver for Blackfin.
 286
 287
 288 config AT91_CF
 289         tristate "AT91 CompactFlash Controller"
 290         depends on PCMCIA && ARCH_AT91
 291         help
 292           Say Y here to support the CompactFlash controller on AT91 chips.
 293           Or choose M to compile the driver as a module named "at91_cf".
 294
 295 config ELECTRA_CF
 296         tristate "Electra CompactFlash Controller"
 297         depends on PCMCIA && PPC_PASEMI
 298         help
 299           Say Y here to support the CompactFlash controller on the
 300           PA Semi Electra eval board.
 301
 302 config PCCARD_NONSTATIC
 303         bool
 304
 305 config PCCARD_IODYN
 306         bool
 307
 308 endif   # PCCARD