drivers/pcmcia/Kconfig

   1 #
   2 # PCMCIA bus subsystem configuration
   3 #
   4 # Right now the non-CardBus choices are not supported
   5 # by the integrated kernel driver.
   6 #
   7
   8 menu "PCCARD (PCMCIA/CardBus) support"
   9
  10 config PCCARD
  11         tristate "PCCard (PCMCIA/CardBus) support"
  12         select HOTPLUG
  13         ---help---
  14           Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
  15           computer.  These are credit-card size devices such as network cards,
  16           modems or hard drives often used with laptops computers.  There are
  17           actually two varieties of these cards: the older 16 bit PCMCIA cards
  18           and the newer 32 bit CardBus cards.
  19
  20           To compile this driver as modules, choose M here: the
  21           module will be called pcmcia_core.
  22
  23 if PCCARD
  24
  25 config PCMCIA_DEBUG
  26         bool "Enable PCCARD debugging"
  27         help
  28           Say Y here to enable PCMCIA subsystem debugging.  You
  29           will need to choose the debugging level either via the
  30           kernel command line, or module options depending whether
  31           you build the PCMCIA as modules.
  32
  33           The kernel command line options are:
  34             pcmcia_core.pc_debug=N
  35             ds.pc_debug=N
  36             sa11xx_core.pc_debug=N
  37
  38           The module option is called pc_debug=N
  39
  40           In all the above examples, N is the debugging verbosity
  41           level.
  42
  43 config PCMCIA
  44         tristate "16-bit PCMCIA support"
  45         default y
  46         ---help---
  47            This option enables support for 16-bit PCMCIA cards. Most older
  48            PC-cards are such 16-bit PCMCIA cards, so unless you know you're
  49            only using 32-bit CardBus cards, say Y or M here.
  50
  51            To use 16-bit PCMCIA cards, you will need supporting software from
  52            David Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
  53            for location).  Please also read the PCMCIA-HOWTO, available from
  54            <http://www.tldp.org/docs.html#howto>.
  55
  56            To compile this driver as modules, choose M here: the
  57            module will be called pcmcia.
  58
  59            If unsure, say Y.
  60
  61 config CARDBUS
  62         bool "32-bit CardBus support"
  63         depends on PCI
  64         default y
  65         ---help---
  66           CardBus is a bus mastering architecture for PC-cards, which allows
  67           for 32 bit PC-cards (the original PCMCIA standard specifies only
  68           a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
  69
  70           To use 32 bit PC-cards, you also need a CardBus compatible host
  71           bridge. Virtually all modern PCMCIA bridges do this, and most of
  72           them are "yenta-compatible", so say Y or M there, too.
  73
  74           If unsure, say Y.
  75
  76 comment "PC-card bridges"
  77
  78 config YENTA
  79         tristate "CardBus yenta-compatible bridge support"
  80         depends on PCI
  81 #fixme: remove dependendcy on CARDBUS
  82         depends on CARDBUS
  83         select PCCARD_NONSTATIC
  84         ---help---
  85           This option enables support for CardBus host bridges.  Virtually
  86           all modern PCMCIA bridges are CardBus compatible.  A "bridge" is
  87           the hardware inside your computer that PCMCIA cards are plugged
  88           into.
  89
  90           To compile this driver as modules, choose M here: the
  91           module will be called yenta_socket.
  92
  93           If unsure, say Y.
  94
  95 config PD6729
  96         tristate "Cirrus PD6729 compatible bridge support"
  97         depends on PCMCIA && PCI
  98         select PCCARD_NONSTATIC
  99         help
 100           This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
 101           device, found in some older laptops and PCMCIA card readers.
 102
 103 config I82092
 104         tristate "i82092 compatible bridge support"
 105         depends on PCMCIA && PCI
 106         select PCCARD_NONSTATIC
 107         help
 108           This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
 109           found in some older laptops and more commonly in evaluation boards for the
 110           chip.
 111
 112 config I82365
 113         tristate "i82365 compatible bridge support"
 114         depends on PCMCIA && ISA
 115         select PCCARD_NONSTATIC
 116         help
 117           Say Y here to include support for ISA-bus PCMCIA host bridges that
 118           are register compatible with the Intel i82365.  These are found on
 119           older laptops and ISA-bus card readers for desktop systems.  A
 120           "bridge" is the hardware inside your computer that PCMCIA cards are
 121           plugged into. If unsure, say N.
 122
 123 config TCIC
 124         tristate "Databook TCIC host bridge support"
 125         depends on PCMCIA
 126         select PCCARD_NONSTATIC
 127         help
 128           Say Y here to include support for the Databook TCIC family of PCMCIA
 129           host bridges. These are only found on a handful of old systems.
 130           "Bridge" is the name used for the hardware inside your computer that
 131           PCMCIA cards are plugged into. If unsure, say N.
 132
 133 config HD64465_PCMCIA
 134         tristate "HD64465 host bridge support"
 135         depends on HD64465 && PCMCIA
 136
 137 config PCMCIA_AU1X00
 138         tristate "Au1x00 pcmcia support"
 139         depends on SOC_AU1X00 && PCMCIA
 140
 141 config PCMCIA_SA1100
 142         tristate "SA1100 support"
 143         depends on ARM && ARCH_SA1100 && PCMCIA
 144         help
 145           Say Y here to include support for SA11x0-based PCMCIA or CF
 146           sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
 147           Xscale(R) embedded machines.
 148
 149           This driver is also available as a module called sa1100_cs.
 150
 151 config PCMCIA_SA1111
 152         tristate "SA1111 support"
 153         depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
 154         help
 155           Say Y  here to include support for SA1111-based PCMCIA or CF
 156           sockets, found on the Jornada 720, Graphicsmaster and other
 157           StrongARM(R)/Xscale(R) embedded machines.
 158
 159           This driver is also available as a module called sa1111_cs.
 160
 161 config PCMCIA_PXA2XX
 162         tristate "PXA2xx support"
 163         depends on ARM && ARCH_PXA && PCMCIA
 164         help
 165           Say Y here to include support for the PXA2xx PCMCIA controller
 166
 167 config PCMCIA_PROBE
 168         bool
 169         default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X
 170
 171 config M32R_PCC
 172         bool "M32R PCMCIA I/F"
 173         depends on M32R && CHIP_M32700 && PCMCIA
 174         help
 175           Say Y here to use the M32R PCMCIA controller.
 176
 177 config M32R_CFC
 178         bool "M32R CF I/F Controller"
 179         depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_OPSPUT)
 180         help
 181           Say Y here to use the M32R CompactFlash controller.
 182
 183 config M32R_CFC_NUM
 184         int "M32R CF I/F number"
 185         depends on M32R_CFC
 186         default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_OPSPUT
 187         help
 188           Set the number of M32R CF slots.
 189
 190 config PCMCIA_VRC4171
 191         tristate "NEC VRC4171 Card Controllers support"
 192         depends on VRC4171 && PCMCIA
 193
 194 config PCMCIA_VRC4173
 195         tristate "NEC VRC4173 CARDU support"
 196         depends on CPU_VR41XX && PCI && PCMCIA
 197
 198 config PCCARD_NONSTATIC
 199         tristate
 200
 201 endif   # PCCARD
 202
 203 endmenu