drivers/pcmcia/Kconfig

   1 #
   2 # PCCARD (PCMCIA/CardBus) bus subsystem configuration
   3 #
   4
   5 menuconfig PCCARD
   6         tristate "PCCard (PCMCIA/CardBus) support"
   7         depends on HOTPLUG
   8         ---help---
   9           Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
  10           computer.  These are credit-card size devices such as network cards,
  11           modems or hard drives often used with laptops computers.  There are
  12           actually two varieties of these cards: 16 bit PCMCIA and 32 bit
  13           CardBus cards.
  14
  15           To compile this driver as modules, choose M here: the
  16           module will be called pcmcia_core.
  17
  18 if PCCARD
  19
  20 config PCMCIA
  21         tristate "16-bit PCMCIA support"
  22         select CRC32
  23         default y
  24         ---help---
  25            This option enables support for 16-bit PCMCIA cards. Most older
  26            PC-cards are such 16-bit PCMCIA cards, so unless you know you're
  27            only using 32-bit CardBus cards, say Y or M here.
  28
  29            To use 16-bit PCMCIA cards, you will need supporting software in
  30            most cases. (see the file <file:Documentation/Changes> for
  31            location and details).
  32
  33            To compile this driver as modules, choose M here: the
  34            module will be called pcmcia.
  35
  36            If unsure, say Y.
  37
  38 config PCMCIA_LOAD_CIS
  39         bool "Load CIS updates from userspace (EXPERIMENTAL)"
  40         depends on PCMCIA && EXPERIMENTAL
  41         select FW_LOADER
  42         default y
  43         help
  44           Some PCMCIA cards require an updated Card Information Structure (CIS)
  45           to be loaded from userspace to work correctly. If you say Y here,
  46           and your userspace is arranged correctly, this will be loaded
  47           automatically using the in-kernel firmware loader and the hotplug
  48           subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
  49
  50           If unsure, say Y.
  51
  52 config CARDBUS
  53         bool "32-bit CardBus support"
  54         depends on PCI
  55         default y
  56         ---help---
  57           CardBus is a bus mastering architecture for PC-cards, which allows
  58           for 32 bit PC-cards (the original PCMCIA standard specifies only
  59           a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
  60
  61           To use 32 bit PC-cards, you also need a CardBus compatible host
  62           bridge. Virtually all modern PCMCIA bridges do this, and most of
  63           them are "yenta-compatible", so say Y or M there, too.
  64
  65           If unsure, say Y.
  66
  67 comment "PC-card bridges"
  68
  69 config YENTA
  70         tristate "CardBus yenta-compatible bridge support"
  71         depends on PCI
  72         select CARDBUS if !EMBEDDED
  73         select PCCARD_NONSTATIC if PCMCIA != n
  74         ---help---
  75           This option enables support for CardBus host bridges.  Virtually
  76           all modern PCMCIA bridges are CardBus compatible.  A "bridge" is
  77           the hardware inside your computer that PCMCIA cards are plugged
  78           into.
  79
  80           To compile this driver as modules, choose M here: the
  81           module will be called yenta_socket.
  82
  83           If unsure, say Y.
  84
  85 config YENTA_O2
  86         default y
  87         bool "Special initialization for O2Micro bridges" if EMBEDDED
  88         depends on YENTA
  89
  90 config YENTA_RICOH
  91         default y
  92         bool "Special initialization for Ricoh bridges" if EMBEDDED
  93         depends on YENTA
  94
  95 config YENTA_TI
  96         default y
  97         bool "Special initialization for TI and EnE bridges" if EMBEDDED
  98         depends on YENTA
  99
 100 config YENTA_ENE_TUNE
 101         default y
 102         bool "Auto-tune EnE bridges for CB cards" if EMBEDDED
 103         depends on YENTA_TI && CARDBUS
 104
 105 config YENTA_TOSHIBA
 106         default y
 107         bool "Special initialization for Toshiba ToPIC bridges" if EMBEDDED
 108         depends on YENTA
 109
 110 config PD6729
 111         tristate "Cirrus PD6729 compatible bridge support"
 112         depends on PCMCIA && PCI
 113         select PCCARD_NONSTATIC
 114         help
 115           This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
 116           device, found in some older laptops and PCMCIA card readers.
 117
 118 config I82092
 119         tristate "i82092 compatible bridge support"
 120         depends on PCMCIA && PCI
 121         select PCCARD_NONSTATIC
 122         help
 123           This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
 124           found in some older laptops and more commonly in evaluation boards for the
 125           chip.
 126
 127 config I82365
 128         tristate "i82365 compatible bridge support"
 129         depends on PCMCIA && ISA
 130         select PCCARD_NONSTATIC
 131         help
 132           Say Y here to include support for ISA-bus PCMCIA host bridges that
 133           are register compatible with the Intel i82365.  These are found on
 134           older laptops and ISA-bus card readers for desktop systems.  A
 135           "bridge" is the hardware inside your computer that PCMCIA cards are
 136           plugged into. If unsure, say N.
 137
 138 config TCIC
 139         tristate "Databook TCIC host bridge support"
 140         depends on PCMCIA && ISA
 141         select PCCARD_NONSTATIC
 142         help
 143           Say Y here to include support for the Databook TCIC family of PCMCIA
 144           host bridges. These are only found on a handful of old systems.
 145           "Bridge" is the name used for the hardware inside your computer that
 146           PCMCIA cards are plugged into. If unsure, say N.
 147
 148 config PCMCIA_M8XX
 149         tristate "MPC8xx PCMCIA support"
 150         depends on PCCARD && PPC && 8xx
 151         select PCCARD_IODYN if PCMCIA != n
 152         help
 153           Say Y here to include support for PowerPC 8xx series PCMCIA
 154           controller.
 155
 156           This driver is also available as a module called m8xx_pcmcia.
 157
 158 config PCMCIA_AU1X00
 159         tristate "Au1x00 pcmcia support"
 160         depends on SOC_AU1X00 && PCMCIA
 161
 162 config PCMCIA_ALCHEMY_DEVBOARD
 163         tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
 164         depends on SOC_AU1X00 && PCMCIA
 165         select 64BIT_PHYS_ADDR
 166         help
 167           Enable this driver of you want PCMCIA support on your Alchemy
 168           Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200 board.
 169           NOT suitable for the PB1000!
 170
 171           This driver is also available as a module called db1xxx_ss.ko
 172
 173 config PCMCIA_XXS1500
 174         tristate "MyCable XXS1500 PCMCIA socket support"
 175         depends on PCMCIA && MIPS_XXS1500
 176         select 64BIT_PHYS_ADDR
 177         help
 178           Support for the PCMCIA/CF socket interface on MyCable XXS1500
 179           systems.
 180
 181           This driver is also available as a module called xxs1500_ss.ko
 182
 183 config PCMCIA_BCM63XX
 184         tristate "bcm63xx pcmcia support"
 185         depends on BCM63XX && PCMCIA
 186
 187 config PCMCIA_SOC_COMMON
 188         tristate
 189
 190 config PCMCIA_SA1100
 191         tristate "SA1100 support"
 192         depends on ARM && ARCH_SA1100 && PCMCIA
 193         select PCMCIA_SOC_COMMON
 194         help
 195           Say Y here to include support for SA11x0-based PCMCIA or CF
 196           sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
 197           Xscale(R) embedded machines.
 198
 199           This driver is also available as a module called sa1100_cs.
 200
 201 config PCMCIA_SA1111
 202         tristate "SA1111 support"
 203         depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
 204         select PCMCIA_SOC_COMMON
 205         help
 206           Say Y  here to include support for SA1111-based PCMCIA or CF
 207           sockets, found on the Jornada 720, Graphicsmaster and other
 208           StrongARM(R)/Xscale(R) embedded machines.
 209
 210           This driver is also available as a module called sa1111_cs.
 211
 212 config PCMCIA_PXA2XX
 213         tristate "PXA2xx support"
 214         depends on ARM && ARCH_PXA && PCMCIA
 215         depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
 216                     || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
 217                     || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
 218                     || MACH_VPAC270)
 219         select PCMCIA_SOC_COMMON
 220         help
 221           Say Y here to include support for the PXA2xx PCMCIA controller
 222
 223 config PCMCIA_DEBUG
 224         bool "Enable debugging"
 225         depends on (PCMCIA_SA1111 || PCMCIA_SA1100 || PCMCIA_PXA2XX)
 226         help
 227           Say Y here to enable debugging for the SoC PCMCIA layer.
 228           You will need to choose the debugging level either via the
 229           kernel command line, or module options depending whether
 230           you build the drivers as modules.
 231
 232           The kernel command line options are:
 233             sa11xx_core.pc_debug=N
 234             pxa2xx_core.pc_debug=N
 235
 236           The module option is called pc_debug=N
 237
 238           In all the above examples, N is the debugging verbosity
 239           level.
 240
 241 config PCMCIA_PROBE
 242         bool
 243         default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X && !PARISC
 244
 245 config M32R_PCC
 246         bool "M32R PCMCIA I/F"
 247         depends on M32R && CHIP_M32700 && PCMCIA
 248         help
 249           Say Y here to use the M32R PCMCIA controller.
 250
 251 config M32R_CFC
 252         bool "M32R CF I/F Controller"
 253         depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
 254         help
 255           Say Y here to use the M32R CompactFlash controller.
 256
 257 config M32R_CFC_NUM
 258         int "M32R CF I/F number"
 259         depends on M32R_CFC
 260         default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
 261         help
 262           Set the number of M32R CF slots.
 263
 264 config PCMCIA_VRC4171
 265         tristate "NEC VRC4171 Card Controllers support"
 266         depends on CPU_VR41XX && ISA && PCMCIA
 267
 268 config PCMCIA_VRC4173
 269         tristate "NEC VRC4173 CARDU support"
 270         depends on CPU_VR41XX && PCI && PCMCIA
 271
 272 config OMAP_CF
 273         tristate "OMAP CompactFlash Controller"
 274         depends on PCMCIA && ARCH_OMAP16XX
 275         help
 276           Say Y here to support the CompactFlash controller on OMAP.
 277           Note that this doesn't support "True IDE" mode.
 278
 279 config BFIN_CFPCMCIA
 280         tristate "Blackfin CompactFlash PCMCIA Driver"
 281         depends on PCMCIA && BLACKFIN
 282         help
 283           Say Y here to support the CompactFlash PCMCIA driver for Blackfin.
 284
 285
 286 config AT91_CF
 287         tristate "AT91 CompactFlash Controller"
 288         depends on PCMCIA && ARCH_AT91RM9200
 289         help
 290           Say Y here to support the CompactFlash controller on AT91 chips.
 291           Or choose M to compile the driver as a module named "at91_cf".
 292
 293 config ELECTRA_CF
 294         tristate "Electra CompactFlash Controller"
 295         depends on PCMCIA && PPC_PASEMI
 296         help
 297           Say Y here to support the CompactFlash controller on the
 298           PA Semi Electra eval board.
 299
 300 config PCCARD_NONSTATIC
 301         bool
 302
 303 config PCCARD_IODYN
 304         bool
 305
 306 endif   # PCCARD