drivers/phy/Kconfig

   1 #
   2 # PHY
   3 #
   4
   5 menu "PHY Subsystem"
   6
   7 config GENERIC_PHY
   8         bool "PHY Core"
   9         help
  10           Generic PHY support.
  11
  12           This framework is designed to provide a generic interface for PHY
  13           devices present in the kernel. This layer will have the generic
  14           API by which phy drivers can create PHY using the phy framework and
  15           phy users can obtain reference to the PHY. All the users of this
  16           framework should select this config.
  17
  18 config PHY_BCM_NS_USB2
  19         tristate "Broadcom Northstar USB 2.0 PHY Driver"
  20         depends on ARCH_BCM_IPROC || COMPILE_TEST
  21         depends on HAS_IOMEM && OF
  22         select GENERIC_PHY
  23         help
  24           Enable this to support Broadcom USB 2.0 PHY connected to the USB
  25           controller on Northstar family.
  26
  27 config PHY_BCM_NS_USB3
  28         tristate "Broadcom Northstar USB 3.0 PHY Driver"
  29         depends on ARCH_BCM_IPROC || COMPILE_TEST
  30         depends on HAS_IOMEM && OF
  31         select GENERIC_PHY
  32         help
  33           Enable this to support Broadcom USB 3.0 PHY connected to the USB
  34           controller on Northstar family.
  35
  36 config PHY_BERLIN_USB
  37         tristate "Marvell Berlin USB PHY Driver"
  38         depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
  39         select GENERIC_PHY
  40         help
  41           Enable this to support the USB PHY on Marvell Berlin SoCs.
  42
  43 config PHY_BERLIN_SATA
  44         tristate "Marvell Berlin SATA PHY driver"
  45         depends on ARCH_BERLIN && HAS_IOMEM && OF
  46         select GENERIC_PHY
  47         help
  48           Enable this to support the SATA PHY on Marvell Berlin SoCs.
  49
  50 config ARMADA375_USBCLUSTER_PHY
  51         def_bool y
  52         depends on MACH_ARMADA_375 || COMPILE_TEST
  53         depends on OF && HAS_IOMEM
  54         select GENERIC_PHY
  55
  56 config PHY_DA8XX_USB
  57         tristate "TI DA8xx USB PHY Driver"
  58         depends on ARCH_DAVINCI_DA8XX
  59         select GENERIC_PHY
  60         select MFD_SYSCON
  61         help
  62           Enable this to support the USB PHY on DA8xx SoCs.
  63
  64           This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
  65
  66 config PHY_DM816X_USB
  67         tristate "TI dm816x USB PHY driver"
  68         depends on ARCH_OMAP2PLUS
  69         depends on USB_SUPPORT
  70         select GENERIC_PHY
  71         select USB_PHY
  72         help
  73           Enable this for dm816x USB to work.
  74
  75 config PHY_EXYNOS_MIPI_VIDEO
  76         tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
  77         depends on HAS_IOMEM
  78         depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
  79         select GENERIC_PHY
  80         default y if ARCH_S5PV210 || ARCH_EXYNOS
  81         help
  82           Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
  83           and EXYNOS SoCs.
  84
  85 config PHY_LPC18XX_USB_OTG
  86         tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
  87         depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
  88         depends on MFD_SYSCON
  89         select GENERIC_PHY
  90         help
  91           Enable this to support NXP LPC18xx/43xx internal USB OTG PHY.
  92
  93           This driver is need for USB0 support on LPC18xx/43xx and takes
  94           care of enabling and clock setup.
  95
  96 config PHY_PXA_28NM_HSIC
  97         tristate "Marvell USB HSIC 28nm PHY Driver"
  98         depends on HAS_IOMEM
  99         select GENERIC_PHY
 100         help
 101           Enable this to support Marvell USB HSIC PHY driver for Marvell
 102           SoC. This driver will do the PHY initialization and shutdown.
 103           The PHY driver will be used by Marvell ehci driver.
 104
 105           To compile this driver as a module, choose M here.
 106
 107 config PHY_PXA_28NM_USB2
 108         tristate "Marvell USB 2.0 28nm PHY Driver"
 109         depends on HAS_IOMEM
 110         select GENERIC_PHY
 111         help
 112           Enable this to support Marvell USB 2.0 PHY driver for Marvell
 113           SoC. This driver will do the PHY initialization and shutdown.
 114           The PHY driver will be used by Marvell udc/ehci/otg driver.
 115
 116           To compile this driver as a module, choose M here.
 117
 118 config PHY_MVEBU_SATA
 119         def_bool y
 120         depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
 121         depends on OF
 122         select GENERIC_PHY
 123
 124 config PHY_MIPHY28LP
 125         tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
 126         depends on ARCH_STI
 127         select GENERIC_PHY
 128         help
 129           Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
 130           that is part of STMicroelectronics STiH407 SoC.
 131
 132 config PHY_RCAR_GEN2
 133         tristate "Renesas R-Car generation 2 USB PHY driver"
 134         depends on ARCH_RENESAS
 135         depends on GENERIC_PHY
 136         help
 137           Support for USB PHY found on Renesas R-Car generation 2 SoCs.
 138
 139 config PHY_RCAR_GEN3_USB2
 140         tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
 141         depends on ARCH_RENESAS
 142         depends on EXTCON
 143         select GENERIC_PHY
 144         help
 145           Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
 146
 147 config OMAP_CONTROL_PHY
 148         tristate "OMAP CONTROL PHY Driver"
 149         depends on ARCH_OMAP2PLUS || COMPILE_TEST
 150         help
 151           Enable this to add support for the PHY part present in the control
 152           module. This driver has API to power on the USB2 PHY and to write to
 153           the mailbox. The mailbox is present only in omap4 and the register to
 154           power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
 155           additional register to power on USB3 PHY/SATA PHY/PCIE PHY
 156           (PIPE3 PHY).
 157
 158 config OMAP_USB2
 159         tristate "OMAP USB2 PHY Driver"
 160         depends on ARCH_OMAP2PLUS
 161         depends on USB_SUPPORT
 162         select GENERIC_PHY
 163         select USB_PHY
 164         select OMAP_CONTROL_PHY
 165         depends on OMAP_OCP2SCP
 166         help
 167           Enable this to support the transceiver that is part of SOC. This
 168           driver takes care of all the PHY functionality apart from comparator.
 169           The USB OTG controller communicates with the comparator using this
 170           driver.
 171
 172 config TI_PIPE3
 173         tristate "TI PIPE3 PHY Driver"
 174         depends on ARCH_OMAP2PLUS || COMPILE_TEST
 175         select GENERIC_PHY
 176         select OMAP_CONTROL_PHY
 177         depends on OMAP_OCP2SCP
 178         help
 179           Enable this to support the PIPE3 PHY that is part of TI SOCs. This
 180           driver takes care of all the PHY functionality apart from comparator.
 181           This driver interacts with the "OMAP Control PHY Driver" to power
 182           on/off the PHY.
 183
 184 config TWL4030_USB
 185         tristate "TWL4030 USB Transceiver Driver"
 186         depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
 187         depends on USB_SUPPORT
 188         depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y'
 189         select GENERIC_PHY
 190         select USB_PHY
 191         help
 192           Enable this to support the USB OTG transceiver on TWL4030
 193           family chips (including the TWL5030 and TPS659x0 devices).
 194           This transceiver supports high and full speed devices plus,
 195           in host mode, low speed.
 196
 197 config PHY_EXYNOS_DP_VIDEO
 198         tristate "EXYNOS SoC series Display Port PHY driver"
 199         depends on OF
 200         depends on ARCH_EXYNOS || COMPILE_TEST
 201         default ARCH_EXYNOS
 202         select GENERIC_PHY
 203         help
 204           Support for Display Port PHY found on Samsung EXYNOS SoCs.
 205
 206 config BCM_KONA_USB2_PHY
 207         tristate "Broadcom Kona USB2 PHY Driver"
 208         depends on HAS_IOMEM
 209         select GENERIC_PHY
 210         help
 211           Enable this to support the Broadcom Kona USB 2.0 PHY.
 212
 213 config PHY_EXYNOS5250_SATA
 214         tristate "Exynos5250 Sata SerDes/PHY driver"
 215         depends on SOC_EXYNOS5250
 216         depends on HAS_IOMEM
 217         depends on OF
 218         select GENERIC_PHY
 219         select I2C
 220         select I2C_S3C2410
 221         select MFD_SYSCON
 222         help
 223           Enable this to support SATA SerDes/Phy found on Samsung's
 224           Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
 225           SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
 226           port to accept one SATA device.
 227
 228 config PHY_HIX5HD2_SATA
 229         tristate "HIX5HD2 SATA PHY Driver"
 230         depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
 231         select GENERIC_PHY
 232         select MFD_SYSCON
 233         help
 234           Support for SATA PHY on Hisilicon hix5hd2 Soc.
 235
 236 config PHY_MT65XX_USB3
 237         tristate "Mediatek USB3.0 PHY Driver"
 238         depends on ARCH_MEDIATEK && OF
 239         select GENERIC_PHY
 240         help
 241           Say 'Y' here to add support for Mediatek USB3.0 PHY driver,
 242           it supports multiple usb2.0 and usb3.0 ports.
 243
 244 config PHY_HI6220_USB
 245         tristate "hi6220 USB PHY support"
 246         depends on (ARCH_HISI && ARM64) || COMPILE_TEST
 247         select GENERIC_PHY
 248         select MFD_SYSCON
 249         help
 250           Enable this to support the HISILICON HI6220 USB PHY.
 251
 252           To compile this driver as a module, choose M here.
 253
 254 config PHY_SUN4I_USB
 255         tristate "Allwinner sunxi SoC USB PHY driver"
 256         depends on ARCH_SUNXI && HAS_IOMEM && OF
 257         depends on RESET_CONTROLLER
 258         depends on EXTCON
 259         depends on POWER_SUPPLY
 260         depends on USB_SUPPORT
 261         select GENERIC_PHY
 262         select USB_COMMON
 263         help
 264           Enable this to support the transceiver that is part of Allwinner
 265           sunxi SoCs.
 266
 267           This driver controls the entire USB PHY block, both the USB OTG
 268           parts, as well as the 2 regular USB 2 host PHYs.
 269
 270 config PHY_SUN9I_USB
 271         tristate "Allwinner sun9i SoC USB PHY driver"
 272         depends on ARCH_SUNXI && HAS_IOMEM && OF
 273         depends on RESET_CONTROLLER
 274         depends on USB_SUPPORT
 275         select USB_COMMON
 276         select GENERIC_PHY
 277         help
 278           Enable this to support the transceiver that is part of Allwinner
 279           sun9i SoCs.
 280
 281           This driver controls each individual USB 2 host PHY.
 282
 283 config PHY_SAMSUNG_USB2
 284         tristate "Samsung USB 2.0 PHY driver"
 285         depends on HAS_IOMEM
 286         depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
 287         select GENERIC_PHY
 288         select MFD_SYSCON
 289         default ARCH_EXYNOS
 290         help
 291           Enable this to support the Samsung USB 2.0 PHY driver for Samsung
 292           SoCs. This driver provides the interface for USB 2.0 PHY. Support
 293           for particular PHYs will be enabled based on the SoC type in addition
 294           to this driver.
 295
 296 config PHY_S5PV210_USB2
 297         bool "Support for S5PV210"
 298         depends on PHY_SAMSUNG_USB2
 299         depends on ARCH_S5PV210
 300         help
 301           Enable USB PHY support for S5PV210. This option requires that Samsung
 302           USB 2.0 PHY driver is enabled and means that support for this
 303           particular SoC is compiled in the driver. In case of S5PV210 two phys
 304           are available - device and host.
 305
 306 config PHY_EXYNOS4210_USB2
 307         bool
 308         depends on PHY_SAMSUNG_USB2
 309         default CPU_EXYNOS4210
 310
 311 config PHY_EXYNOS4X12_USB2
 312         bool
 313         depends on PHY_SAMSUNG_USB2
 314         default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
 315
 316 config PHY_EXYNOS5250_USB2
 317         bool
 318         depends on PHY_SAMSUNG_USB2
 319         default SOC_EXYNOS5250 || SOC_EXYNOS5420
 320
 321 config PHY_EXYNOS5_USBDRD
 322         tristate "Exynos5 SoC series USB DRD PHY driver"
 323         depends on ARCH_EXYNOS && OF
 324         depends on HAS_IOMEM
 325         depends on USB_DWC3_EXYNOS
 326         select GENERIC_PHY
 327         select MFD_SYSCON
 328         default y
 329         help
 330           Enable USB DRD PHY support for Exynos 5 SoC series.
 331           This driver provides PHY interface for USB 3.0 DRD controller
 332           present on Exynos5 SoC series.
 333
 334 config PHY_EXYNOS_PCIE
 335         bool "Exynos PCIe PHY driver"
 336         depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
 337         select GENERIC_PHY
 338         help
 339           Enable PCIe PHY support for Exynos SoC series.
 340           This driver provides PHY interface for Exynos PCIe controller.
 341
 342 config PHY_PISTACHIO_USB
 343         tristate "IMG Pistachio USB2.0 PHY driver"
 344         depends on MACH_PISTACHIO
 345         select GENERIC_PHY
 346         help
 347           Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
 348
 349 config PHY_QCOM_APQ8064_SATA
 350         tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
 351         depends on ARCH_QCOM
 352         depends on HAS_IOMEM
 353         depends on OF
 354         select GENERIC_PHY
 355
 356 config PHY_QCOM_IPQ806X_SATA
 357         tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
 358         depends on ARCH_QCOM
 359         depends on HAS_IOMEM
 360         depends on OF
 361         select GENERIC_PHY
 362
 363 config PHY_ROCKCHIP_USB
 364         tristate "Rockchip USB2 PHY Driver"
 365         depends on ARCH_ROCKCHIP && OF
 366         select GENERIC_PHY
 367         help
 368           Enable this to support the Rockchip USB 2.0 PHY.
 369
 370 config PHY_ROCKCHIP_INNO_USB2
 371         tristate "Rockchip INNO USB2PHY Driver"
 372         depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
 373         depends on COMMON_CLK
 374         depends on EXTCON
 375         depends on USB_SUPPORT
 376         select GENERIC_PHY
 377         select USB_COMMON
 378         help
 379           Support for Rockchip USB2.0 PHY with Innosilicon IP block.
 380
 381 config PHY_ROCKCHIP_EMMC
 382         tristate "Rockchip EMMC PHY Driver"
 383         depends on ARCH_ROCKCHIP && OF
 384         select GENERIC_PHY
 385         help
 386           Enable this to support the Rockchip EMMC PHY.
 387
 388 config PHY_ROCKCHIP_DP
 389         tristate "Rockchip Display Port PHY Driver"
 390         depends on ARCH_ROCKCHIP && OF
 391         select GENERIC_PHY
 392         help
 393           Enable this to support the Rockchip Display Port PHY.
 394
 395 config PHY_ROCKCHIP_PCIE
 396         tristate "Rockchip PCIe PHY Driver"
 397         depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
 398         select GENERIC_PHY
 399         select MFD_SYSCON
 400         help
 401           Enable this to support the Rockchip PCIe PHY.
 402
 403 config PHY_ROCKCHIP_TYPEC
 404         tristate "Rockchip TYPEC PHY Driver"
 405         depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
 406         select EXTCON
 407         select GENERIC_PHY
 408         select RESET_CONTROLLER
 409         help
 410           Enable this to support the Rockchip USB TYPEC PHY.
 411
 412 config PHY_ST_SPEAR1310_MIPHY
 413         tristate "ST SPEAR1310-MIPHY driver"
 414         select GENERIC_PHY
 415         depends on MACH_SPEAR1310 || COMPILE_TEST
 416         help
 417           Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
 418
 419 config PHY_ST_SPEAR1340_MIPHY
 420         tristate "ST SPEAR1340-MIPHY driver"
 421         select GENERIC_PHY
 422         depends on MACH_SPEAR1340 || COMPILE_TEST
 423         help
 424           Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
 425
 426 config PHY_XGENE
 427         tristate "APM X-Gene 15Gbps PHY support"
 428         depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
 429         select GENERIC_PHY
 430         help
 431           This option enables support for APM X-Gene SoC multi-purpose PHY.
 432
 433 config PHY_STIH407_USB
 434         tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
 435         depends on RESET_CONTROLLER
 436         depends on ARCH_STI || COMPILE_TEST
 437         select GENERIC_PHY
 438         help
 439           Enable this support to enable the picoPHY device used by USB2
 440           and USB3 controllers on STMicroelectronics STiH407 SoC families.
 441
 442 config PHY_QCOM_UFS
 443         tristate "Qualcomm UFS PHY driver"
 444         depends on OF && ARCH_QCOM
 445         select GENERIC_PHY
 446         help
 447           Support for UFS PHY on QCOM chipsets.
 448
 449 config PHY_QCOM_USB_HS
 450         tristate "Qualcomm USB HS PHY module"
 451         depends on USB_ULPI_BUS
 452         select GENERIC_PHY
 453         help
 454           Support for the USB high-speed ULPI compliant phy on Qualcomm
 455           chipsets.
 456
 457 config PHY_QCOM_USB_HSIC
 458         tristate "Qualcomm USB HSIC ULPI PHY module"
 459         depends on USB_ULPI_BUS
 460         select GENERIC_PHY
 461         help
 462           Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
 463
 464 config PHY_TUSB1210
 465         tristate "TI TUSB1210 ULPI PHY module"
 466         depends on USB_ULPI_BUS
 467         select GENERIC_PHY
 468         help
 469           Support for TI TUSB1210 USB ULPI PHY.
 470
 471 config PHY_BRCM_SATA
 472         tristate "Broadcom SATA PHY driver"
 473         depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST
 474         depends on OF
 475         select GENERIC_PHY
 476         default ARCH_BCM_IPROC
 477         help
 478           Enable this to support the Broadcom SATA PHY.
 479           If unsure, say N.
 480
 481 config PHY_CYGNUS_PCIE
 482         tristate "Broadcom Cygnus PCIe PHY driver"
 483         depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
 484         select GENERIC_PHY
 485         default ARCH_BCM_CYGNUS
 486         help
 487           Enable this to support the Broadcom Cygnus PCIe PHY.
 488           If unsure, say N.
 489
 490 source "drivers/phy/tegra/Kconfig"
 491
 492 config PHY_NS2_PCIE
 493         tristate "Broadcom Northstar2 PCIe PHY driver"
 494         depends on OF && MDIO_BUS_MUX_BCM_IPROC
 495         select GENERIC_PHY
 496         default ARCH_BCM_IPROC
 497         help
 498           Enable this to support the Broadcom Northstar2 PCIe PHY.
 499           If unsure, say N.
 500
 501 config PHY_MESON8B_USB2
 502         tristate "Meson8b and GXBB USB2 PHY driver"
 503         default ARCH_MESON
 504         depends on OF && (ARCH_MESON || COMPILE_TEST)
 505         depends on USB_SUPPORT
 506         select USB_COMMON
 507         select GENERIC_PHY
 508         help
 509           Enable this to support the Meson USB2 PHYs found in Meson8b
 510           and GXBB SoCs.
 511           If unsure, say N.
 512
 513 config PHY_NSP_USB3
 514         tristate "Broadcom NorthStar plus USB3 PHY driver"
 515         depends on OF && (ARCH_BCM_NSP || COMPILE_TEST)
 516         select GENERIC_PHY
 517         default ARCH_BCM_NSP
 518         help
 519           Enable this to support the Broadcom Northstar plus USB3 PHY.
 520           If unsure, say N.
 521 endmenu