drivers/phy/Kconfig

   1 #
   2 # PHY
   3 #
   4
   5 menu "PHY Subsystem"
   6
   7 config GENERIC_PHY
   8         bool "PHY Core"
   9         help
  10           Generic PHY support.
  11
  12           This framework is designed to provide a generic interface for PHY
  13           devices present in the kernel. This layer will have the generic
  14           API by which phy drivers can create PHY using the phy framework and
  15           phy users can obtain reference to the PHY. All the users of this
  16           framework should select this config.
  17
  18 config PHY_BERLIN_USB
  19         tristate "Marvell Berlin USB PHY Driver"
  20         depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
  21         select GENERIC_PHY
  22         help
  23           Enable this to support the USB PHY on Marvell Berlin SoCs.
  24
  25 config PHY_BERLIN_SATA
  26         tristate "Marvell Berlin SATA PHY driver"
  27         depends on ARCH_BERLIN && HAS_IOMEM && OF
  28         select GENERIC_PHY
  29         help
  30           Enable this to support the SATA PHY on Marvell Berlin SoCs.
  31
  32 config ARMADA375_USBCLUSTER_PHY
  33         def_bool y
  34         depends on MACH_ARMADA_375 || COMPILE_TEST
  35         depends on OF
  36         select GENERIC_PHY
  37
  38 config PHY_EXYNOS_MIPI_VIDEO
  39         tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
  40         depends on HAS_IOMEM
  41         depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
  42         select GENERIC_PHY
  43         default y if ARCH_S5PV210 || ARCH_EXYNOS
  44         help
  45           Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
  46           and EXYNOS SoCs.
  47
  48 config PHY_MVEBU_SATA
  49         def_bool y
  50         depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
  51         depends on OF
  52         select GENERIC_PHY
  53
  54 config PHY_MIPHY28LP
  55         tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
  56         depends on ARCH_STI
  57         select GENERIC_PHY
  58         help
  59           Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
  60           that is part of STMicroelectronics STiH407 SoC.
  61
  62 config PHY_MIPHY365X
  63         tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
  64         depends on ARCH_STI
  65         depends on HAS_IOMEM
  66         depends on OF
  67         select GENERIC_PHY
  68         help
  69           Enable this to support the miphy transceiver (for SATA/PCIE)
  70           that is part of STMicroelectronics STiH41x SoC series.
  71
  72 config PHY_RCAR_GEN2
  73         tristate "Renesas R-Car generation 2 USB PHY driver"
  74         depends on ARCH_SHMOBILE
  75         depends on GENERIC_PHY
  76         help
  77           Support for USB PHY found on Renesas R-Car generation 2 SoCs.
  78
  79 config OMAP_CONTROL_PHY
  80         tristate "OMAP CONTROL PHY Driver"
  81         depends on ARCH_OMAP2PLUS || COMPILE_TEST
  82         help
  83           Enable this to add support for the PHY part present in the control
  84           module. This driver has API to power on the USB2 PHY and to write to
  85           the mailbox. The mailbox is present only in omap4 and the register to
  86           power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
  87           additional register to power on USB3 PHY/SATA PHY/PCIE PHY
  88           (PIPE3 PHY).
  89
  90 config OMAP_USB2
  91         tristate "OMAP USB2 PHY Driver"
  92         depends on ARCH_OMAP2PLUS
  93         depends on USB_PHY
  94         select GENERIC_PHY
  95         select OMAP_CONTROL_PHY
  96         depends on OMAP_OCP2SCP
  97         help
  98           Enable this to support the transceiver that is part of SOC. This
  99           driver takes care of all the PHY functionality apart from comparator.
 100           The USB OTG controller communicates with the comparator using this
 101           driver.
 102
 103 config TI_PIPE3
 104         tristate "TI PIPE3 PHY Driver"
 105         depends on ARCH_OMAP2PLUS || COMPILE_TEST
 106         select GENERIC_PHY
 107         select OMAP_CONTROL_PHY
 108         depends on OMAP_OCP2SCP
 109         help
 110           Enable this to support the PIPE3 PHY that is part of TI SOCs. This
 111           driver takes care of all the PHY functionality apart from comparator.
 112           This driver interacts with the "OMAP Control PHY Driver" to power
 113           on/off the PHY.
 114
 115 config TWL4030_USB
 116         tristate "TWL4030 USB Transceiver Driver"
 117         depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
 118         depends on USB_PHY
 119         select GENERIC_PHY
 120         help
 121           Enable this to support the USB OTG transceiver on TWL4030
 122           family chips (including the TWL5030 and TPS659x0 devices).
 123           This transceiver supports high and full speed devices plus,
 124           in host mode, low speed.
 125
 126 config PHY_EXYNOS_DP_VIDEO
 127         tristate "EXYNOS SoC series Display Port PHY driver"
 128         depends on OF
 129         depends on ARCH_EXYNOS || COMPILE_TEST
 130         default ARCH_EXYNOS
 131         select GENERIC_PHY
 132         help
 133           Support for Display Port PHY found on Samsung EXYNOS SoCs.
 134
 135 config BCM_KONA_USB2_PHY
 136         tristate "Broadcom Kona USB2 PHY Driver"
 137         depends on HAS_IOMEM
 138         select GENERIC_PHY
 139         help
 140           Enable this to support the Broadcom Kona USB 2.0 PHY.
 141
 142 config PHY_EXYNOS5250_SATA
 143         tristate "Exynos5250 Sata SerDes/PHY driver"
 144         depends on SOC_EXYNOS5250
 145         depends on HAS_IOMEM
 146         depends on OF
 147         select GENERIC_PHY
 148         select I2C
 149         select I2C_S3C2410
 150         select MFD_SYSCON
 151         help
 152           Enable this to support SATA SerDes/Phy found on Samsung's
 153           Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
 154           SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
 155           port to accept one SATA device.
 156
 157 config PHY_HIX5HD2_SATA
 158         tristate "HIX5HD2 SATA PHY Driver"
 159         depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
 160         select GENERIC_PHY
 161         select MFD_SYSCON
 162         help
 163           Support for SATA PHY on Hisilicon hix5hd2 Soc.
 164
 165 config PHY_SUN4I_USB
 166         tristate "Allwinner sunxi SoC USB PHY driver"
 167         depends on ARCH_SUNXI && HAS_IOMEM && OF
 168         depends on RESET_CONTROLLER
 169         select GENERIC_PHY
 170         help
 171           Enable this to support the transceiver that is part of Allwinner
 172           sunxi SoCs.
 173
 174           This driver controls the entire USB PHY block, both the USB OTG
 175           parts, as well as the 2 regular USB 2 host PHYs.
 176
 177 config PHY_SAMSUNG_USB2
 178         tristate "Samsung USB 2.0 PHY driver"
 179         depends on HAS_IOMEM
 180         depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
 181         select GENERIC_PHY
 182         select MFD_SYSCON
 183         default ARCH_EXYNOS
 184         help
 185           Enable this to support the Samsung USB 2.0 PHY driver for Samsung
 186           SoCs. This driver provides the interface for USB 2.0 PHY. Support
 187           for particular PHYs will be enabled based on the SoC type in addition
 188           to this driver.
 189
 190 config PHY_S5PV210_USB2
 191         bool "Support for S5PV210"
 192         depends on PHY_SAMSUNG_USB2
 193         depends on ARCH_S5PV210
 194         help
 195           Enable USB PHY support for S5PV210. This option requires that Samsung
 196           USB 2.0 PHY driver is enabled and means that support for this
 197           particular SoC is compiled in the driver. In case of S5PV210 two phys
 198           are available - device and host.
 199
 200 config PHY_EXYNOS4210_USB2
 201         bool
 202         depends on PHY_SAMSUNG_USB2
 203         default CPU_EXYNOS4210
 204
 205 config PHY_EXYNOS4X12_USB2
 206         bool
 207         depends on PHY_SAMSUNG_USB2
 208         default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
 209
 210 config PHY_EXYNOS5250_USB2
 211         bool
 212         depends on PHY_SAMSUNG_USB2
 213         default SOC_EXYNOS5250 || SOC_EXYNOS5420
 214
 215 config PHY_EXYNOS5_USBDRD
 216         tristate "Exynos5 SoC series USB DRD PHY driver"
 217         depends on ARCH_EXYNOS && OF
 218         depends on HAS_IOMEM
 219         depends on USB_DWC3_EXYNOS
 220         select GENERIC_PHY
 221         select MFD_SYSCON
 222         default y
 223         help
 224           Enable USB DRD PHY support for Exynos 5 SoC series.
 225           This driver provides PHY interface for USB 3.0 DRD controller
 226           present on Exynos5 SoC series.
 227
 228 config PHY_QCOM_APQ8064_SATA
 229         tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
 230         depends on ARCH_QCOM
 231         depends on HAS_IOMEM
 232         depends on OF
 233         select GENERIC_PHY
 234
 235 config PHY_QCOM_IPQ806X_SATA
 236         tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
 237         depends on ARCH_QCOM
 238         depends on HAS_IOMEM
 239         depends on OF
 240         select GENERIC_PHY
 241
 242 config PHY_ST_SPEAR1310_MIPHY
 243         tristate "ST SPEAR1310-MIPHY driver"
 244         select GENERIC_PHY
 245         depends on MACH_SPEAR1310 || COMPILE_TEST
 246         help
 247           Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
 248
 249 config PHY_ST_SPEAR1340_MIPHY
 250         tristate "ST SPEAR1340-MIPHY driver"
 251         select GENERIC_PHY
 252         depends on MACH_SPEAR1340 || COMPILE_TEST
 253         help
 254           Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
 255
 256 config PHY_XGENE
 257         tristate "APM X-Gene 15Gbps PHY support"
 258         depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
 259         select GENERIC_PHY
 260         help
 261           This option enables support for APM X-Gene SoC multi-purpose PHY.
 262
 263 config PHY_STIH407_USB
 264         tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
 265         depends on RESET_CONTROLLER
 266         depends on ARCH_STI || COMPILE_TEST
 267         select GENERIC_PHY
 268         help
 269           Enable this support to enable the picoPHY device used by USB2
 270           and USB3 controllers on STMicroelectronics STiH407 SoC families.
 271
 272 config PHY_STIH41X_USB
 273         tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
 274         depends on ARCH_STI
 275         select GENERIC_PHY
 276         help
 277           Enable this to support the USB transceiver that is part of
 278           STMicroelectronics STiH41x SoC series.
 279
 280 config PHY_QCOM_UFS
 281         tristate "Qualcomm UFS PHY driver"
 282         depends on OF && ARCH_MSM
 283         select GENERIC_PHY
 284         help
 285           Support for UFS PHY on QCOM chipsets.
 286
 287 endmenu