drivers/phy/Kconfig

   1 #
   2 # PHY
   3 #
   4
   5 menu "PHY Subsystem"
   6
   7 config GENERIC_PHY
   8         bool "PHY Core"
   9         help
  10           Generic PHY support.
  11
  12           This framework is designed to provide a generic interface for PHY
  13           devices present in the kernel. This layer will have the generic
  14           API by which phy drivers can create PHY using the phy framework and
  15           phy users can obtain reference to the PHY. All the users of this
  16           framework should select this config.
  17
  18 config PHY_BERLIN_USB
  19         tristate "Marvell Berlin USB PHY Driver"
  20         depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
  21         select GENERIC_PHY
  22         help
  23           Enable this to support the USB PHY on Marvell Berlin SoCs.
  24
  25 config PHY_BERLIN_SATA
  26         tristate "Marvell Berlin SATA PHY driver"
  27         depends on ARCH_BERLIN && HAS_IOMEM && OF
  28         select GENERIC_PHY
  29         help
  30           Enable this to support the SATA PHY on Marvell Berlin SoCs.
  31
  32 config ARMADA375_USBCLUSTER_PHY
  33         def_bool y
  34         depends on MACH_ARMADA_375 || COMPILE_TEST
  35         depends on OF
  36         select GENERIC_PHY
  37
  38 config PHY_DM816X_USB
  39         tristate "TI dm816x USB PHY driver"
  40         depends on ARCH_OMAP2PLUS
  41         depends on USB_SUPPORT
  42         select GENERIC_PHY
  43         select USB_PHY
  44         help
  45           Enable this for dm816x USB to work.
  46
  47 config PHY_EXYNOS_MIPI_VIDEO
  48         tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
  49         depends on HAS_IOMEM
  50         depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
  51         select GENERIC_PHY
  52         default y if ARCH_S5PV210 || ARCH_EXYNOS
  53         help
  54           Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
  55           and EXYNOS SoCs.
  56
  57 config PHY_LPC18XX_USB_OTG
  58         tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
  59         depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
  60         depends on MFD_SYSCON
  61         select GENERIC_PHY
  62         help
  63           Enable this to support NXP LPC18xx/43xx internal USB OTG PHY.
  64
  65           This driver is need for USB0 support on LPC18xx/43xx and takes
  66           care of enabling and clock setup.
  67
  68 config PHY_PXA_28NM_HSIC
  69         tristate "Marvell USB HSIC 28nm PHY Driver"
  70         depends on HAS_IOMEM
  71         select GENERIC_PHY
  72         help
  73           Enable this to support Marvell USB HSIC PHY driver for Marvell
  74           SoC. This driver will do the PHY initialization and shutdown.
  75           The PHY driver will be used by Marvell ehci driver.
  76
  77           To compile this driver as a module, choose M here.
  78
  79 config PHY_PXA_28NM_USB2
  80         tristate "Marvell USB 2.0 28nm PHY Driver"
  81         depends on HAS_IOMEM
  82         select GENERIC_PHY
  83         help
  84           Enable this to support Marvell USB 2.0 PHY driver for Marvell
  85           SoC. This driver will do the PHY initialization and shutdown.
  86           The PHY driver will be used by Marvell udc/ehci/otg driver.
  87
  88           To compile this driver as a module, choose M here.
  89
  90 config PHY_MVEBU_SATA
  91         def_bool y
  92         depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
  93         depends on OF
  94         select GENERIC_PHY
  95
  96 config PHY_MIPHY28LP
  97         tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
  98         depends on ARCH_STI
  99         select GENERIC_PHY
 100         help
 101           Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
 102           that is part of STMicroelectronics STiH407 SoC.
 103
 104 config PHY_MIPHY365X
 105         tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
 106         depends on ARCH_STI
 107         depends on HAS_IOMEM
 108         depends on OF
 109         select GENERIC_PHY
 110         help
 111           Enable this to support the miphy transceiver (for SATA/PCIE)
 112           that is part of STMicroelectronics STiH41x SoC series.
 113
 114 config PHY_RCAR_GEN2
 115         tristate "Renesas R-Car generation 2 USB PHY driver"
 116         depends on ARCH_SHMOBILE
 117         depends on GENERIC_PHY
 118         help
 119           Support for USB PHY found on Renesas R-Car generation 2 SoCs.
 120
 121 config OMAP_CONTROL_PHY
 122         tristate "OMAP CONTROL PHY Driver"
 123         depends on ARCH_OMAP2PLUS || COMPILE_TEST
 124         help
 125           Enable this to add support for the PHY part present in the control
 126           module. This driver has API to power on the USB2 PHY and to write to
 127           the mailbox. The mailbox is present only in omap4 and the register to
 128           power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
 129           additional register to power on USB3 PHY/SATA PHY/PCIE PHY
 130           (PIPE3 PHY).
 131
 132 config OMAP_USB2
 133         tristate "OMAP USB2 PHY Driver"
 134         depends on ARCH_OMAP2PLUS
 135         depends on USB_SUPPORT
 136         select GENERIC_PHY
 137         select USB_PHY
 138         select OMAP_CONTROL_PHY
 139         depends on OMAP_OCP2SCP
 140         help
 141           Enable this to support the transceiver that is part of SOC. This
 142           driver takes care of all the PHY functionality apart from comparator.
 143           The USB OTG controller communicates with the comparator using this
 144           driver.
 145
 146 config TI_PIPE3
 147         tristate "TI PIPE3 PHY Driver"
 148         depends on ARCH_OMAP2PLUS || COMPILE_TEST
 149         select GENERIC_PHY
 150         select OMAP_CONTROL_PHY
 151         depends on OMAP_OCP2SCP
 152         help
 153           Enable this to support the PIPE3 PHY that is part of TI SOCs. This
 154           driver takes care of all the PHY functionality apart from comparator.
 155           This driver interacts with the "OMAP Control PHY Driver" to power
 156           on/off the PHY.
 157
 158 config TWL4030_USB
 159         tristate "TWL4030 USB Transceiver Driver"
 160         depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
 161         depends on USB_SUPPORT
 162         select GENERIC_PHY
 163         select USB_PHY
 164         help
 165           Enable this to support the USB OTG transceiver on TWL4030
 166           family chips (including the TWL5030 and TPS659x0 devices).
 167           This transceiver supports high and full speed devices plus,
 168           in host mode, low speed.
 169
 170 config PHY_EXYNOS_DP_VIDEO
 171         tristate "EXYNOS SoC series Display Port PHY driver"
 172         depends on OF
 173         depends on ARCH_EXYNOS || COMPILE_TEST
 174         default ARCH_EXYNOS
 175         select GENERIC_PHY
 176         help
 177           Support for Display Port PHY found on Samsung EXYNOS SoCs.
 178
 179 config BCM_KONA_USB2_PHY
 180         tristate "Broadcom Kona USB2 PHY Driver"
 181         depends on HAS_IOMEM
 182         select GENERIC_PHY
 183         help
 184           Enable this to support the Broadcom Kona USB 2.0 PHY.
 185
 186 config PHY_EXYNOS5250_SATA
 187         tristate "Exynos5250 Sata SerDes/PHY driver"
 188         depends on SOC_EXYNOS5250
 189         depends on HAS_IOMEM
 190         depends on OF
 191         select GENERIC_PHY
 192         select I2C
 193         select I2C_S3C2410
 194         select MFD_SYSCON
 195         help
 196           Enable this to support SATA SerDes/Phy found on Samsung's
 197           Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
 198           SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
 199           port to accept one SATA device.
 200
 201 config PHY_HIX5HD2_SATA
 202         tristate "HIX5HD2 SATA PHY Driver"
 203         depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
 204         select GENERIC_PHY
 205         select MFD_SYSCON
 206         help
 207           Support for SATA PHY on Hisilicon hix5hd2 Soc.
 208
 209 config PHY_MT65XX_USB3
 210         tristate "Mediatek USB3.0 PHY Driver"
 211         depends on ARCH_MEDIATEK && OF
 212         select GENERIC_PHY
 213         help
 214           Say 'Y' here to add support for Mediatek USB3.0 PHY driver
 215           for mt65xx SoCs. it supports two usb2.0 ports and
 216           one usb3.0 port.
 217
 218 config PHY_SUN4I_USB
 219         tristate "Allwinner sunxi SoC USB PHY driver"
 220         depends on ARCH_SUNXI && HAS_IOMEM && OF
 221         depends on RESET_CONTROLLER
 222         depends on EXTCON
 223         depends on POWER_SUPPLY
 224         select GENERIC_PHY
 225         help
 226           Enable this to support the transceiver that is part of Allwinner
 227           sunxi SoCs.
 228
 229           This driver controls the entire USB PHY block, both the USB OTG
 230           parts, as well as the 2 regular USB 2 host PHYs.
 231
 232 config PHY_SUN9I_USB
 233         tristate "Allwinner sun9i SoC USB PHY driver"
 234         depends on ARCH_SUNXI && HAS_IOMEM && OF
 235         depends on RESET_CONTROLLER
 236         depends on USB_COMMON
 237         select GENERIC_PHY
 238         help
 239           Enable this to support the transceiver that is part of Allwinner
 240           sun9i SoCs.
 241
 242           This driver controls each individual USB 2 host PHY.
 243
 244 config PHY_SAMSUNG_USB2
 245         tristate "Samsung USB 2.0 PHY driver"
 246         depends on HAS_IOMEM
 247         depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
 248         select GENERIC_PHY
 249         select MFD_SYSCON
 250         default ARCH_EXYNOS
 251         help
 252           Enable this to support the Samsung USB 2.0 PHY driver for Samsung
 253           SoCs. This driver provides the interface for USB 2.0 PHY. Support
 254           for particular PHYs will be enabled based on the SoC type in addition
 255           to this driver.
 256
 257 config PHY_S5PV210_USB2
 258         bool "Support for S5PV210"
 259         depends on PHY_SAMSUNG_USB2
 260         depends on ARCH_S5PV210
 261         help
 262           Enable USB PHY support for S5PV210. This option requires that Samsung
 263           USB 2.0 PHY driver is enabled and means that support for this
 264           particular SoC is compiled in the driver. In case of S5PV210 two phys
 265           are available - device and host.
 266
 267 config PHY_EXYNOS4210_USB2
 268         bool
 269         depends on PHY_SAMSUNG_USB2
 270         default CPU_EXYNOS4210
 271
 272 config PHY_EXYNOS4X12_USB2
 273         bool
 274         depends on PHY_SAMSUNG_USB2
 275         default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
 276
 277 config PHY_EXYNOS5250_USB2
 278         bool
 279         depends on PHY_SAMSUNG_USB2
 280         default SOC_EXYNOS5250 || SOC_EXYNOS5420
 281
 282 config PHY_EXYNOS5_USBDRD
 283         tristate "Exynos5 SoC series USB DRD PHY driver"
 284         depends on ARCH_EXYNOS && OF
 285         depends on HAS_IOMEM
 286         depends on USB_DWC3_EXYNOS
 287         select GENERIC_PHY
 288         select MFD_SYSCON
 289         default y
 290         help
 291           Enable USB DRD PHY support for Exynos 5 SoC series.
 292           This driver provides PHY interface for USB 3.0 DRD controller
 293           present on Exynos5 SoC series.
 294
 295 config PHY_PISTACHIO_USB
 296         tristate "IMG Pistachio USB2.0 PHY driver"
 297         depends on MACH_PISTACHIO
 298         select GENERIC_PHY
 299         help
 300           Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
 301
 302 config PHY_QCOM_APQ8064_SATA
 303         tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
 304         depends on ARCH_QCOM
 305         depends on HAS_IOMEM
 306         depends on OF
 307         select GENERIC_PHY
 308
 309 config PHY_QCOM_IPQ806X_SATA
 310         tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
 311         depends on ARCH_QCOM
 312         depends on HAS_IOMEM
 313         depends on OF
 314         select GENERIC_PHY
 315
 316 config PHY_ROCKCHIP_USB
 317         tristate "Rockchip USB2 PHY Driver"
 318         depends on ARCH_ROCKCHIP && OF
 319         select GENERIC_PHY
 320         help
 321           Enable this to support the Rockchip USB 2.0 PHY.
 322
 323 config PHY_ST_SPEAR1310_MIPHY
 324         tristate "ST SPEAR1310-MIPHY driver"
 325         select GENERIC_PHY
 326         depends on MACH_SPEAR1310 || COMPILE_TEST
 327         help
 328           Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
 329
 330 config PHY_ST_SPEAR1340_MIPHY
 331         tristate "ST SPEAR1340-MIPHY driver"
 332         select GENERIC_PHY
 333         depends on MACH_SPEAR1340 || COMPILE_TEST
 334         help
 335           Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
 336
 337 config PHY_XGENE
 338         tristate "APM X-Gene 15Gbps PHY support"
 339         depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
 340         select GENERIC_PHY
 341         help
 342           This option enables support for APM X-Gene SoC multi-purpose PHY.
 343
 344 config PHY_STIH407_USB
 345         tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
 346         depends on RESET_CONTROLLER
 347         depends on ARCH_STI || COMPILE_TEST
 348         select GENERIC_PHY
 349         help
 350           Enable this support to enable the picoPHY device used by USB2
 351           and USB3 controllers on STMicroelectronics STiH407 SoC families.
 352
 353 config PHY_STIH41X_USB
 354         tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
 355         depends on ARCH_STI
 356         select GENERIC_PHY
 357         help
 358           Enable this to support the USB transceiver that is part of
 359           STMicroelectronics STiH41x SoC series.
 360
 361 config PHY_QCOM_UFS
 362         tristate "Qualcomm UFS PHY driver"
 363         depends on OF && ARCH_QCOM
 364         select GENERIC_PHY
 365         help
 366           Support for UFS PHY on QCOM chipsets.
 367
 368 config PHY_TUSB1210
 369         tristate "TI TUSB1210 ULPI PHY module"
 370         depends on USB_ULPI_BUS
 371         select GENERIC_PHY
 372         help
 373           Support for TI TUSB1210 USB ULPI PHY.
 374
 375 config PHY_BRCMSTB_SATA
 376         tristate "Broadcom STB SATA PHY driver"
 377         depends on ARCH_BRCMSTB
 378         depends on OF
 379         select GENERIC_PHY
 380         help
 381           Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
 382           Likely useful only with CONFIG_SATA_BRCMSTB enabled.
 383
 384 config PHY_CYGNUS_PCIE
 385         tristate "Broadcom Cygnus PCIe PHY driver"
 386         depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
 387         select GENERIC_PHY
 388         default ARCH_BCM_CYGNUS
 389         help
 390           Enable this to support the Broadcom Cygnus PCIe PHY.
 391           If unsure, say N.
 392
 393 endmenu