drivers/phy/Kconfig

   1 #
   2 # PHY
   3 #
   4
   5 menu "PHY Subsystem"
   6
   7 config GENERIC_PHY
   8         bool "PHY Core"
   9         help
  10           Generic PHY support.
  11
  12           This framework is designed to provide a generic interface for PHY
  13           devices present in the kernel. This layer will have the generic
  14           API by which phy drivers can create PHY using the phy framework and
  15           phy users can obtain reference to the PHY. All the users of this
  16           framework should select this config.
  17
  18 config PHY_BERLIN_USB
  19         tristate "Marvell Berlin USB PHY Driver"
  20         depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
  21         select GENERIC_PHY
  22         help
  23           Enable this to support the USB PHY on Marvell Berlin SoCs.
  24
  25 config PHY_BERLIN_SATA
  26         tristate "Marvell Berlin SATA PHY driver"
  27         depends on ARCH_BERLIN && HAS_IOMEM && OF
  28         select GENERIC_PHY
  29         help
  30           Enable this to support the SATA PHY on Marvell Berlin SoCs.
  31
  32 config ARMADA375_USBCLUSTER_PHY
  33         def_bool y
  34         depends on MACH_ARMADA_375 || COMPILE_TEST
  35         depends on OF && HAS_IOMEM
  36         select GENERIC_PHY
  37
  38 config PHY_DM816X_USB
  39         tristate "TI dm816x USB PHY driver"
  40         depends on ARCH_OMAP2PLUS
  41         depends on USB_SUPPORT
  42         select GENERIC_PHY
  43         select USB_PHY
  44         help
  45           Enable this for dm816x USB to work.
  46
  47 config PHY_EXYNOS_MIPI_VIDEO
  48         tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
  49         depends on HAS_IOMEM
  50         depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
  51         select GENERIC_PHY
  52         default y if ARCH_S5PV210 || ARCH_EXYNOS
  53         help
  54           Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
  55           and EXYNOS SoCs.
  56
  57 config PHY_LPC18XX_USB_OTG
  58         tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
  59         depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
  60         depends on MFD_SYSCON
  61         select GENERIC_PHY
  62         help
  63           Enable this to support NXP LPC18xx/43xx internal USB OTG PHY.
  64
  65           This driver is need for USB0 support on LPC18xx/43xx and takes
  66           care of enabling and clock setup.
  67
  68 config PHY_PXA_28NM_HSIC
  69         tristate "Marvell USB HSIC 28nm PHY Driver"
  70         depends on HAS_IOMEM
  71         select GENERIC_PHY
  72         help
  73           Enable this to support Marvell USB HSIC PHY driver for Marvell
  74           SoC. This driver will do the PHY initialization and shutdown.
  75           The PHY driver will be used by Marvell ehci driver.
  76
  77           To compile this driver as a module, choose M here.
  78
  79 config PHY_PXA_28NM_USB2
  80         tristate "Marvell USB 2.0 28nm PHY Driver"
  81         depends on HAS_IOMEM
  82         select GENERIC_PHY
  83         help
  84           Enable this to support Marvell USB 2.0 PHY driver for Marvell
  85           SoC. This driver will do the PHY initialization and shutdown.
  86           The PHY driver will be used by Marvell udc/ehci/otg driver.
  87
  88           To compile this driver as a module, choose M here.
  89
  90 config PHY_MVEBU_SATA
  91         def_bool y
  92         depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
  93         depends on OF
  94         select GENERIC_PHY
  95
  96 config PHY_MIPHY28LP
  97         tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
  98         depends on ARCH_STI
  99         select GENERIC_PHY
 100         help
 101           Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
 102           that is part of STMicroelectronics STiH407 SoC.
 103
 104 config PHY_MIPHY365X
 105         tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
 106         depends on ARCH_STI
 107         depends on HAS_IOMEM
 108         depends on OF
 109         select GENERIC_PHY
 110         help
 111           Enable this to support the miphy transceiver (for SATA/PCIE)
 112           that is part of STMicroelectronics STiH41x SoC series.
 113
 114 config PHY_RCAR_GEN2
 115         tristate "Renesas R-Car generation 2 USB PHY driver"
 116         depends on ARCH_SHMOBILE
 117         depends on GENERIC_PHY
 118         help
 119           Support for USB PHY found on Renesas R-Car generation 2 SoCs.
 120
 121 config PHY_RCAR_GEN3_USB2
 122         tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
 123         depends on OF && ARCH_SHMOBILE
 124         select GENERIC_PHY
 125         help
 126           Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
 127
 128 config OMAP_CONTROL_PHY
 129         tristate "OMAP CONTROL PHY Driver"
 130         depends on ARCH_OMAP2PLUS || COMPILE_TEST
 131         help
 132           Enable this to add support for the PHY part present in the control
 133           module. This driver has API to power on the USB2 PHY and to write to
 134           the mailbox. The mailbox is present only in omap4 and the register to
 135           power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
 136           additional register to power on USB3 PHY/SATA PHY/PCIE PHY
 137           (PIPE3 PHY).
 138
 139 config OMAP_USB2
 140         tristate "OMAP USB2 PHY Driver"
 141         depends on ARCH_OMAP2PLUS
 142         depends on USB_SUPPORT
 143         select GENERIC_PHY
 144         select USB_PHY
 145         select OMAP_CONTROL_PHY
 146         depends on OMAP_OCP2SCP
 147         help
 148           Enable this to support the transceiver that is part of SOC. This
 149           driver takes care of all the PHY functionality apart from comparator.
 150           The USB OTG controller communicates with the comparator using this
 151           driver.
 152
 153 config TI_PIPE3
 154         tristate "TI PIPE3 PHY Driver"
 155         depends on ARCH_OMAP2PLUS || COMPILE_TEST
 156         select GENERIC_PHY
 157         select OMAP_CONTROL_PHY
 158         depends on OMAP_OCP2SCP
 159         help
 160           Enable this to support the PIPE3 PHY that is part of TI SOCs. This
 161           driver takes care of all the PHY functionality apart from comparator.
 162           This driver interacts with the "OMAP Control PHY Driver" to power
 163           on/off the PHY.
 164
 165 config TWL4030_USB
 166         tristate "TWL4030 USB Transceiver Driver"
 167         depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
 168         depends on USB_SUPPORT
 169         select GENERIC_PHY
 170         select USB_PHY
 171         help
 172           Enable this to support the USB OTG transceiver on TWL4030
 173           family chips (including the TWL5030 and TPS659x0 devices).
 174           This transceiver supports high and full speed devices plus,
 175           in host mode, low speed.
 176
 177 config PHY_EXYNOS_DP_VIDEO
 178         tristate "EXYNOS SoC series Display Port PHY driver"
 179         depends on OF
 180         depends on ARCH_EXYNOS || COMPILE_TEST
 181         default ARCH_EXYNOS
 182         select GENERIC_PHY
 183         help
 184           Support for Display Port PHY found on Samsung EXYNOS SoCs.
 185
 186 config BCM_KONA_USB2_PHY
 187         tristate "Broadcom Kona USB2 PHY Driver"
 188         depends on HAS_IOMEM
 189         select GENERIC_PHY
 190         help
 191           Enable this to support the Broadcom Kona USB 2.0 PHY.
 192
 193 config PHY_EXYNOS5250_SATA
 194         tristate "Exynos5250 Sata SerDes/PHY driver"
 195         depends on SOC_EXYNOS5250
 196         depends on HAS_IOMEM
 197         depends on OF
 198         select GENERIC_PHY
 199         select I2C
 200         select I2C_S3C2410
 201         select MFD_SYSCON
 202         help
 203           Enable this to support SATA SerDes/Phy found on Samsung's
 204           Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
 205           SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
 206           port to accept one SATA device.
 207
 208 config PHY_HIX5HD2_SATA
 209         tristate "HIX5HD2 SATA PHY Driver"
 210         depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
 211         select GENERIC_PHY
 212         select MFD_SYSCON
 213         help
 214           Support for SATA PHY on Hisilicon hix5hd2 Soc.
 215
 216 config PHY_MT65XX_USB3
 217         tristate "Mediatek USB3.0 PHY Driver"
 218         depends on ARCH_MEDIATEK && OF
 219         select GENERIC_PHY
 220         help
 221           Say 'Y' here to add support for Mediatek USB3.0 PHY driver
 222           for mt65xx SoCs. it supports two usb2.0 ports and
 223           one usb3.0 port.
 224
 225 config PHY_HI6220_USB
 226         tristate "hi6220 USB PHY support"
 227         depends on (ARCH_HISI && ARM64) || COMPILE_TEST
 228         select GENERIC_PHY
 229         select MFD_SYSCON
 230         help
 231           Enable this to support the HISILICON HI6220 USB PHY.
 232
 233           To compile this driver as a module, choose M here.
 234
 235 config PHY_SUN4I_USB
 236         tristate "Allwinner sunxi SoC USB PHY driver"
 237         depends on ARCH_SUNXI && HAS_IOMEM && OF
 238         depends on RESET_CONTROLLER
 239         depends on EXTCON
 240         depends on POWER_SUPPLY
 241         select GENERIC_PHY
 242         help
 243           Enable this to support the transceiver that is part of Allwinner
 244           sunxi SoCs.
 245
 246           This driver controls the entire USB PHY block, both the USB OTG
 247           parts, as well as the 2 regular USB 2 host PHYs.
 248
 249 config PHY_SUN9I_USB
 250         tristate "Allwinner sun9i SoC USB PHY driver"
 251         depends on ARCH_SUNXI && HAS_IOMEM && OF
 252         depends on RESET_CONTROLLER
 253         depends on USB_COMMON
 254         select GENERIC_PHY
 255         help
 256           Enable this to support the transceiver that is part of Allwinner
 257           sun9i SoCs.
 258
 259           This driver controls each individual USB 2 host PHY.
 260
 261 config PHY_SAMSUNG_USB2
 262         tristate "Samsung USB 2.0 PHY driver"
 263         depends on HAS_IOMEM
 264         depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
 265         select GENERIC_PHY
 266         select MFD_SYSCON
 267         default ARCH_EXYNOS
 268         help
 269           Enable this to support the Samsung USB 2.0 PHY driver for Samsung
 270           SoCs. This driver provides the interface for USB 2.0 PHY. Support
 271           for particular PHYs will be enabled based on the SoC type in addition
 272           to this driver.
 273
 274 config PHY_S5PV210_USB2
 275         bool "Support for S5PV210"
 276         depends on PHY_SAMSUNG_USB2
 277         depends on ARCH_S5PV210
 278         help
 279           Enable USB PHY support for S5PV210. This option requires that Samsung
 280           USB 2.0 PHY driver is enabled and means that support for this
 281           particular SoC is compiled in the driver. In case of S5PV210 two phys
 282           are available - device and host.
 283
 284 config PHY_EXYNOS4210_USB2
 285         bool
 286         depends on PHY_SAMSUNG_USB2
 287         default CPU_EXYNOS4210
 288
 289 config PHY_EXYNOS4X12_USB2
 290         bool
 291         depends on PHY_SAMSUNG_USB2
 292         default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
 293
 294 config PHY_EXYNOS5250_USB2
 295         bool
 296         depends on PHY_SAMSUNG_USB2
 297         default SOC_EXYNOS5250 || SOC_EXYNOS5420
 298
 299 config PHY_EXYNOS5_USBDRD
 300         tristate "Exynos5 SoC series USB DRD PHY driver"
 301         depends on ARCH_EXYNOS && OF
 302         depends on HAS_IOMEM
 303         depends on USB_DWC3_EXYNOS
 304         select GENERIC_PHY
 305         select MFD_SYSCON
 306         default y
 307         help
 308           Enable USB DRD PHY support for Exynos 5 SoC series.
 309           This driver provides PHY interface for USB 3.0 DRD controller
 310           present on Exynos5 SoC series.
 311
 312 config PHY_PISTACHIO_USB
 313         tristate "IMG Pistachio USB2.0 PHY driver"
 314         depends on MACH_PISTACHIO
 315         select GENERIC_PHY
 316         help
 317           Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
 318
 319 config PHY_QCOM_APQ8064_SATA
 320         tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
 321         depends on ARCH_QCOM
 322         depends on HAS_IOMEM
 323         depends on OF
 324         select GENERIC_PHY
 325
 326 config PHY_QCOM_IPQ806X_SATA
 327         tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
 328         depends on ARCH_QCOM
 329         depends on HAS_IOMEM
 330         depends on OF
 331         select GENERIC_PHY
 332
 333 config PHY_ROCKCHIP_USB
 334         tristate "Rockchip USB2 PHY Driver"
 335         depends on ARCH_ROCKCHIP && OF
 336         select GENERIC_PHY
 337         help
 338           Enable this to support the Rockchip USB 2.0 PHY.
 339
 340 config PHY_ROCKCHIP_EMMC
 341         tristate "Rockchip EMMC PHY Driver"
 342         depends on ARCH_ROCKCHIP && OF
 343         select GENERIC_PHY
 344         help
 345           Enable this to support the Rockchip EMMC PHY.
 346
 347 config PHY_ROCKCHIP_DP
 348         tristate "Rockchip Display Port PHY Driver"
 349         depends on ARCH_ROCKCHIP && OF
 350         select GENERIC_PHY
 351         help
 352           Enable this to support the Rockchip Display Port PHY.
 353
 354 config PHY_ST_SPEAR1310_MIPHY
 355         tristate "ST SPEAR1310-MIPHY driver"
 356         select GENERIC_PHY
 357         depends on MACH_SPEAR1310 || COMPILE_TEST
 358         help
 359           Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
 360
 361 config PHY_ST_SPEAR1340_MIPHY
 362         tristate "ST SPEAR1340-MIPHY driver"
 363         select GENERIC_PHY
 364         depends on MACH_SPEAR1340 || COMPILE_TEST
 365         help
 366           Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
 367
 368 config PHY_XGENE
 369         tristate "APM X-Gene 15Gbps PHY support"
 370         depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
 371         select GENERIC_PHY
 372         help
 373           This option enables support for APM X-Gene SoC multi-purpose PHY.
 374
 375 config PHY_STIH407_USB
 376         tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
 377         depends on RESET_CONTROLLER
 378         depends on ARCH_STI || COMPILE_TEST
 379         select GENERIC_PHY
 380         help
 381           Enable this support to enable the picoPHY device used by USB2
 382           and USB3 controllers on STMicroelectronics STiH407 SoC families.
 383
 384 config PHY_STIH41X_USB
 385         tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
 386         depends on ARCH_STI
 387         select GENERIC_PHY
 388         help
 389           Enable this to support the USB transceiver that is part of
 390           STMicroelectronics STiH41x SoC series.
 391
 392 config PHY_QCOM_UFS
 393         tristate "Qualcomm UFS PHY driver"
 394         depends on OF && ARCH_QCOM
 395         select GENERIC_PHY
 396         help
 397           Support for UFS PHY on QCOM chipsets.
 398
 399 config PHY_TUSB1210
 400         tristate "TI TUSB1210 ULPI PHY module"
 401         depends on USB_ULPI_BUS
 402         select GENERIC_PHY
 403         help
 404           Support for TI TUSB1210 USB ULPI PHY.
 405
 406 config PHY_BRCMSTB_SATA
 407         tristate "Broadcom STB SATA PHY driver"
 408         depends on ARCH_BRCMSTB || BMIPS_GENERIC
 409         depends on OF
 410         select GENERIC_PHY
 411         help
 412           Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs.
 413           Likely useful only with CONFIG_SATA_BRCMSTB enabled.
 414
 415 config PHY_CYGNUS_PCIE
 416         tristate "Broadcom Cygnus PCIe PHY driver"
 417         depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
 418         select GENERIC_PHY
 419         default ARCH_BCM_CYGNUS
 420         help
 421           Enable this to support the Broadcom Cygnus PCIe PHY.
 422           If unsure, say N.
 423
 424 source "drivers/phy/tegra/Kconfig"
 425
 426 endmenu