Merge branches 'for-5.1/upstream-fixes', 'for-5.2/core', 'for-5.2/ish', 'for-5.2...

[mirror_ubuntu-kernels.git] / drivers / phy / allwinner / phy-sun4i-usb.c

/*
 * Allwinner sun4i USB phy driver
 *
 * Copyright (C) 2014-2015 Hans de Goede <hdegoede@redhat.com>
 *
 * Based on code from
 * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
 *
 * Modelled after: Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver
 * Copyright (C) 2013 Samsung Electronics Co., Ltd.
 * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/extcon-provider.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/phy/phy.h>
#include <linux/phy/phy-sun4i-usb.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/spinlock.h>
#include <linux/usb/of.h>
#include <linux/workqueue.h>

#define REG_ISCR                        0x00
#define REG_PHYCTL_A10                  0x04
#define REG_PHYBIST                     0x08
#define REG_PHYTUNE                     0x0c
#define REG_PHYCTL_A33                  0x10
#define REG_PHY_OTGCTL                  0x20

#define REG_PMU_UNK1                    0x10

#define PHYCTL_DATA                     BIT(7)

#define OTGCTL_ROUTE_MUSB               BIT(0)

#define SUNXI_AHB_ICHR8_EN              BIT(10)
#define SUNXI_AHB_INCR4_BURST_EN        BIT(9)
#define SUNXI_AHB_INCRX_ALIGN_EN        BIT(8)
#define SUNXI_ULPI_BYPASS_EN            BIT(0)

/* ISCR, Interface Status and Control bits */
#define ISCR_ID_PULLUP_EN               (1 << 17)
#define ISCR_DPDM_PULLUP_EN     (1 << 16)
/* sunxi has the phy id/vbus pins not connected, so we use the force bits */
#define ISCR_FORCE_ID_MASK      (3 << 14)
#define ISCR_FORCE_ID_LOW               (2 << 14)
#define ISCR_FORCE_ID_HIGH      (3 << 14)
#define ISCR_FORCE_VBUS_MASK    (3 << 12)
#define ISCR_FORCE_VBUS_LOW     (2 << 12)
#define ISCR_FORCE_VBUS_HIGH    (3 << 12)

/* Common Control Bits for Both PHYs */
#define PHY_PLL_BW                      0x03
#define PHY_RES45_CAL_EN                0x0c

/* Private Control Bits for Each PHY */
#define PHY_TX_AMPLITUDE_TUNE           0x20
#define PHY_TX_SLEWRATE_TUNE            0x22
#define PHY_VBUSVALID_TH_SEL            0x25
#define PHY_PULLUP_RES_SEL              0x27
#define PHY_OTG_FUNC_EN                 0x28
#define PHY_VBUS_DET_EN                 0x29
#define PHY_DISCON_TH_SEL               0x2a
#define PHY_SQUELCH_DETECT              0x3c

/* A83T specific control bits for PHY0 */
#define PHY_CTL_VBUSVLDEXT              BIT(5)
#define PHY_CTL_SIDDQ                   BIT(3)

/* A83T specific control bits for PHY2 HSIC */
#define SUNXI_EHCI_HS_FORCE             BIT(20)
#define SUNXI_HSIC_CONNECT_DET          BIT(17)
#define SUNXI_HSIC_CONNECT_INT          BIT(16)
#define SUNXI_HSIC                      BIT(1)

#define MAX_PHYS                        4

/*
 * Note do not raise the debounce time, we must report Vusb high within 100ms
 * otherwise we get Vbus errors
 */
#define DEBOUNCE_TIME                   msecs_to_jiffies(50)
#define POLL_TIME                       msecs_to_jiffies(250)

enum sun4i_usb_phy_type {
        sun4i_a10_phy,
        sun6i_a31_phy,
        sun8i_a33_phy,
        sun8i_a83t_phy,
        sun8i_h3_phy,
        sun8i_r40_phy,
        sun8i_v3s_phy,
        sun50i_a64_phy,
        sun50i_h6_phy,
};

struct sun4i_usb_phy_cfg {
        int num_phys;
        int hsic_index;
        enum sun4i_usb_phy_type type;
        u32 disc_thresh;
        u8 phyctl_offset;
        bool dedicated_clocks;
        bool enable_pmu_unk1;
        bool phy0_dual_route;
        int missing_phys;
};

struct sun4i_usb_phy_data {
        void __iomem *base;
        const struct sun4i_usb_phy_cfg *cfg;
        enum usb_dr_mode dr_mode;
        spinlock_t reg_lock; /* guard access to phyctl reg */
        struct sun4i_usb_phy {
                struct phy *phy;
                void __iomem *pmu;
                struct regulator *vbus;
                struct reset_control *reset;
                struct clk *clk;
                struct clk *clk2;
                bool regulator_on;
                int index;
        } phys[MAX_PHYS];
        /* phy0 / otg related variables */
        struct extcon_dev *extcon;
        bool phy0_init;
        struct gpio_desc *id_det_gpio;
        struct gpio_desc *vbus_det_gpio;
        struct power_supply *vbus_power_supply;
        struct notifier_block vbus_power_nb;
        bool vbus_power_nb_registered;
        bool force_session_end;
        int id_det_irq;
        int vbus_det_irq;
        int id_det;
        int vbus_det;
        struct delayed_work detect;
};

#define to_sun4i_usb_phy_data(phy) \
        container_of((phy), struct sun4i_usb_phy_data, phys[(phy)->index])

static void sun4i_usb_phy0_update_iscr(struct phy *_phy, u32 clr, u32 set)
{
        struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
        struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
        u32 iscr;

        iscr = readl(data->base + REG_ISCR);
        iscr &= ~clr;
        iscr |= set;
        writel(iscr, data->base + REG_ISCR);
}

static void sun4i_usb_phy0_set_id_detect(struct phy *phy, u32 val)
{
        if (val)
                val = ISCR_FORCE_ID_HIGH;
        else
                val = ISCR_FORCE_ID_LOW;

        sun4i_usb_phy0_update_iscr(phy, ISCR_FORCE_ID_MASK, val);
}

static void sun4i_usb_phy0_set_vbus_detect(struct phy *phy, u32 val)
{
        if (val)
                val = ISCR_FORCE_VBUS_HIGH;
        else
                val = ISCR_FORCE_VBUS_LOW;

        sun4i_usb_phy0_update_iscr(phy, ISCR_FORCE_VBUS_MASK, val);
}

static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
                                int len)
{
        struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy);
        u32 temp, usbc_bit = BIT(phy->index * 2);
        void __iomem *phyctl = phy_data->base + phy_data->cfg->phyctl_offset;
        unsigned long flags;
        int i;

        spin_lock_irqsave(&phy_data->reg_lock, flags);

        if (phy_data->cfg->phyctl_offset == REG_PHYCTL_A33) {
                /* SoCs newer than A33 need us to set phyctl to 0 explicitly */
                writel(0, phyctl);
        }

        for (i = 0; i < len; i++) {
                temp = readl(phyctl);

                /* clear the address portion */
                temp &= ~(0xff << 8);

                /* set the address */
                temp |= ((addr + i) << 8);
                writel(temp, phyctl);

                /* set the data bit and clear usbc bit*/
                temp = readb(phyctl);
                if (data & 0x1)
                        temp |= PHYCTL_DATA;
                else
                        temp &= ~PHYCTL_DATA;
                temp &= ~usbc_bit;
                writeb(temp, phyctl);

                /* pulse usbc_bit */
                temp = readb(phyctl);
                temp |= usbc_bit;
                writeb(temp, phyctl);

                temp = readb(phyctl);
                temp &= ~usbc_bit;
                writeb(temp, phyctl);

                data >>= 1;
        }

        spin_unlock_irqrestore(&phy_data->reg_lock, flags);
}

static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable)
{
        struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy);
        u32 bits, reg_value;

        if (!phy->pmu)
                return;

        bits = SUNXI_AHB_ICHR8_EN | SUNXI_AHB_INCR4_BURST_EN |
                SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN;

        /* A83T USB2 is HSIC */
        if (phy_data->cfg->type == sun8i_a83t_phy && phy->index == 2)
                bits |= SUNXI_EHCI_HS_FORCE | SUNXI_HSIC_CONNECT_INT |
                        SUNXI_HSIC;

        reg_value = readl(phy->pmu);

        if (enable)
                reg_value |= bits;
        else
                reg_value &= ~bits;

        writel(reg_value, phy->pmu);
}

static int sun4i_usb_phy_init(struct phy *_phy)
{
        struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
        struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
        int ret;
        u32 val;

        ret = clk_prepare_enable(phy->clk);
        if (ret)
                return ret;

        ret = clk_prepare_enable(phy->clk2);
        if (ret) {
                clk_disable_unprepare(phy->clk);
                return ret;
        }

        ret = reset_control_deassert(phy->reset);
        if (ret) {
                clk_disable_unprepare(phy->clk2);
                clk_disable_unprepare(phy->clk);
                return ret;
        }

        if (data->cfg->type == sun8i_a83t_phy ||
            data->cfg->type == sun50i_h6_phy) {
                if (phy->index == 0) {
                        val = readl(data->base + data->cfg->phyctl_offset);
                        val |= PHY_CTL_VBUSVLDEXT;
                        val &= ~PHY_CTL_SIDDQ;
                        writel(val, data->base + data->cfg->phyctl_offset);
                }
        } else {
                if (phy->pmu && data->cfg->enable_pmu_unk1) {
                        val = readl(phy->pmu + REG_PMU_UNK1);
                        writel(val & ~2, phy->pmu + REG_PMU_UNK1);
                }

                /* Enable USB 45 Ohm resistor calibration */
                if (phy->index == 0)
                        sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);

                /* Adjust PHY's magnitude and rate */
                sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);

                /* Disconnect threshold adjustment */
                sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
                                    data->cfg->disc_thresh, 2);
        }

        sun4i_usb_phy_passby(phy, 1);

        if (phy->index == 0) {
                data->phy0_init = true;

                /* Enable pull-ups */
                sun4i_usb_phy0_update_iscr(_phy, 0, ISCR_DPDM_PULLUP_EN);
                sun4i_usb_phy0_update_iscr(_phy, 0, ISCR_ID_PULLUP_EN);

                /* Force ISCR and cable state updates */
                data->id_det = -1;
                data->vbus_det = -1;
                queue_delayed_work(system_wq, &data->detect, 0);
        }

        return 0;
}

static int sun4i_usb_phy_exit(struct phy *_phy)
{
        struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
        struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);

        if (phy->index == 0) {
                if (data->cfg->type == sun8i_a83t_phy ||
                    data->cfg->type == sun50i_h6_phy) {
                        void __iomem *phyctl = data->base +
                                data->cfg->phyctl_offset;

                        writel(readl(phyctl) | PHY_CTL_SIDDQ, phyctl);
                }

                /* Disable pull-ups */
                sun4i_usb_phy0_update_iscr(_phy, ISCR_DPDM_PULLUP_EN, 0);
                sun4i_usb_phy0_update_iscr(_phy, ISCR_ID_PULLUP_EN, 0);
                data->phy0_init = false;
        }

        sun4i_usb_phy_passby(phy, 0);
        reset_control_assert(phy->reset);
        clk_disable_unprepare(phy->clk2);
        clk_disable_unprepare(phy->clk);

        return 0;
}

static int sun4i_usb_phy0_get_id_det(struct sun4i_usb_phy_data *data)
{
        switch (data->dr_mode) {
        case USB_DR_MODE_OTG:
                if (data->id_det_gpio)
                        return gpiod_get_value_cansleep(data->id_det_gpio);
                else
                        return 1; /* Fallback to peripheral mode */
        case USB_DR_MODE_HOST:
                return 0;
        case USB_DR_MODE_PERIPHERAL:
        default:
                return 1;
        }
}

static int sun4i_usb_phy0_get_vbus_det(struct sun4i_usb_phy_data *data)
{
        if (data->vbus_det_gpio)
                return gpiod_get_value_cansleep(data->vbus_det_gpio);

        if (data->vbus_power_supply) {
                union power_supply_propval val;
                int r;

                r = power_supply_get_property(data->vbus_power_supply,
                                              POWER_SUPPLY_PROP_PRESENT, &val);
                if (r == 0)
                        return val.intval;
        }

        /* Fallback: report vbus as high */
        return 1;
}

static bool sun4i_usb_phy0_have_vbus_det(struct sun4i_usb_phy_data *data)
{
        return data->vbus_det_gpio || data->vbus_power_supply;
}

static bool sun4i_usb_phy0_poll(struct sun4i_usb_phy_data *data)
{
        if ((data->id_det_gpio && data->id_det_irq <= 0) ||
            (data->vbus_det_gpio && data->vbus_det_irq <= 0))
                return true;

        /*
         * The A31/A23/A33 companion pmics (AXP221/AXP223) do not
         * generate vbus change interrupts when the board is driving
         * vbus using the N_VBUSEN pin on the pmic, so we must poll
         * when using the pmic for vbus-det _and_ we're driving vbus.
         */
        if ((data->cfg->type == sun6i_a31_phy ||
             data->cfg->type == sun8i_a33_phy) &&
            data->vbus_power_supply && data->phys[0].regulator_on)
                return true;

        return false;
}

static int sun4i_usb_phy_power_on(struct phy *_phy)
{
        struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
        struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
        int ret;

        if (!phy->vbus || phy->regulator_on)
                return 0;

        /* For phy0 only turn on Vbus if we don't have an ext. Vbus */
        if (phy->index == 0 && sun4i_usb_phy0_have_vbus_det(data) &&
                                data->vbus_det) {
                dev_warn(&_phy->dev, "External vbus detected, not enabling our own vbus\n");
                return 0;
        }

        ret = regulator_enable(phy->vbus);
        if (ret)
                return ret;

        phy->regulator_on = true;

        /* We must report Vbus high within OTG_TIME_A_WAIT_VRISE msec. */
        if (phy->index == 0 && sun4i_usb_phy0_poll(data))
                mod_delayed_work(system_wq, &data->detect, DEBOUNCE_TIME);

        return 0;
}

static int sun4i_usb_phy_power_off(struct phy *_phy)
{
        struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
        struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);

        if (!phy->vbus || !phy->regulator_on)
                return 0;

        regulator_disable(phy->vbus);
        phy->regulator_on = false;

        /*
         * phy0 vbus typically slowly discharges, sometimes this causes the
         * Vbus gpio to not trigger an edge irq on Vbus off, so force a rescan.
         */
        if (phy->index == 0 && !sun4i_usb_phy0_poll(data))
                mod_delayed_work(system_wq, &data->detect, POLL_TIME);

        return 0;
}

static int sun4i_usb_phy_set_mode(struct phy *_phy,
                                  enum phy_mode mode, int submode)
{
        struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
        struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
        int new_mode;

        if (phy->index != 0) {
                if (mode == PHY_MODE_USB_HOST)
                        return 0;
                return -EINVAL;
        }

        switch (mode) {
        case PHY_MODE_USB_HOST:
                new_mode = USB_DR_MODE_HOST;
                break;
        case PHY_MODE_USB_DEVICE:
                new_mode = USB_DR_MODE_PERIPHERAL;
                break;
        case PHY_MODE_USB_OTG:
                new_mode = USB_DR_MODE_OTG;
                break;
        default:
                return -EINVAL;
        }

        if (new_mode != data->dr_mode) {
                dev_info(&_phy->dev, "Changing dr_mode to %d\n", new_mode);
                data->dr_mode = new_mode;
        }

        data->id_det = -1; /* Force reprocessing of id */
        data->force_session_end = true;
        queue_delayed_work(system_wq, &data->detect, 0);

        return 0;
}

void sun4i_usb_phy_set_squelch_detect(struct phy *_phy, bool enabled)
{
        struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);

        sun4i_usb_phy_write(phy, PHY_SQUELCH_DETECT, enabled ? 0 : 2, 2);
}
EXPORT_SYMBOL_GPL(sun4i_usb_phy_set_squelch_detect);

static const struct phy_ops sun4i_usb_phy_ops = {
        .init           = sun4i_usb_phy_init,
        .exit           = sun4i_usb_phy_exit,
        .power_on       = sun4i_usb_phy_power_on,
        .power_off      = sun4i_usb_phy_power_off,
        .set_mode       = sun4i_usb_phy_set_mode,
        .owner          = THIS_MODULE,
};

static void sun4i_usb_phy0_reroute(struct sun4i_usb_phy_data *data, int id_det)
{
        u32 regval;

        regval = readl(data->base + REG_PHY_OTGCTL);
        if (id_det == 0) {
                /* Host mode. Route phy0 to EHCI/OHCI */
                regval &= ~OTGCTL_ROUTE_MUSB;
        } else {
                /* Peripheral mode. Route phy0 to MUSB */
                regval |= OTGCTL_ROUTE_MUSB;
        }
        writel(regval, data->base + REG_PHY_OTGCTL);
}

static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
{
        struct sun4i_usb_phy_data *data =
                container_of(work, struct sun4i_usb_phy_data, detect.work);
        struct phy *phy0 = data->phys[0].phy;
        bool force_session_end, id_notify = false, vbus_notify = false;
        int id_det, vbus_det;

        if (phy0 == NULL)
                return;

        id_det = sun4i_usb_phy0_get_id_det(data);
        vbus_det = sun4i_usb_phy0_get_vbus_det(data);

        mutex_lock(&phy0->mutex);

        if (!data->phy0_init) {
                mutex_unlock(&phy0->mutex);
                return;
        }

        force_session_end = data->force_session_end;
        data->force_session_end = false;

        if (id_det != data->id_det) {
                /* id-change, force session end if we've no vbus detection */
                if (data->dr_mode == USB_DR_MODE_OTG &&
                    !sun4i_usb_phy0_have_vbus_det(data))
                        force_session_end = true;

                /* When entering host mode (id = 0) force end the session now */
                if (force_session_end && id_det == 0) {
                        sun4i_usb_phy0_set_vbus_detect(phy0, 0);
                        msleep(200);
                        sun4i_usb_phy0_set_vbus_detect(phy0, 1);
                }
                sun4i_usb_phy0_set_id_detect(phy0, id_det);
                data->id_det = id_det;
                id_notify = true;
        }

        if (vbus_det != data->vbus_det) {
                sun4i_usb_phy0_set_vbus_detect(phy0, vbus_det);
                data->vbus_det = vbus_det;
                vbus_notify = true;
        }

        mutex_unlock(&phy0->mutex);

        if (id_notify) {
                extcon_set_state_sync(data->extcon, EXTCON_USB_HOST,
                                        !id_det);
                /* When leaving host mode force end the session here */
                if (force_session_end && id_det == 1) {
                        mutex_lock(&phy0->mutex);
                        sun4i_usb_phy0_set_vbus_detect(phy0, 0);
                        msleep(1000);
                        sun4i_usb_phy0_set_vbus_detect(phy0, 1);
                        mutex_unlock(&phy0->mutex);
                }

                /* Re-route PHY0 if necessary */
                if (data->cfg->phy0_dual_route)
                        sun4i_usb_phy0_reroute(data, id_det);
        }

        if (vbus_notify)
                extcon_set_state_sync(data->extcon, EXTCON_USB, vbus_det);

        if (sun4i_usb_phy0_poll(data))
                queue_delayed_work(system_wq, &data->detect, POLL_TIME);
}

static irqreturn_t sun4i_usb_phy0_id_vbus_det_irq(int irq, void *dev_id)
{
        struct sun4i_usb_phy_data *data = dev_id;

        /* vbus or id changed, let the pins settle and then scan them */
        mod_delayed_work(system_wq, &data->detect, DEBOUNCE_TIME);

        return IRQ_HANDLED;
}

static int sun4i_usb_phy0_vbus_notify(struct notifier_block *nb,
                                      unsigned long val, void *v)
{
        struct sun4i_usb_phy_data *data =
                container_of(nb, struct sun4i_usb_phy_data, vbus_power_nb);
        struct power_supply *psy = v;

        /* Properties on the vbus_power_supply changed, scan vbus_det */
        if (val == PSY_EVENT_PROP_CHANGED && psy == data->vbus_power_supply)
                mod_delayed_work(system_wq, &data->detect, DEBOUNCE_TIME);

        return NOTIFY_OK;
}

static struct phy *sun4i_usb_phy_xlate(struct device *dev,
                                        struct of_phandle_args *args)
{
        struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);

        if (args->args[0] >= data->cfg->num_phys)
                return ERR_PTR(-ENODEV);

        if (data->cfg->missing_phys & BIT(args->args[0]))
                return ERR_PTR(-ENODEV);

        return data->phys[args->args[0]].phy;
}

static int sun4i_usb_phy_remove(struct platform_device *pdev)
{
        struct device *dev = &pdev->dev;
        struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);

        if (data->vbus_power_nb_registered)
                power_supply_unreg_notifier(&data->vbus_power_nb);
        if (data->id_det_irq > 0)
                devm_free_irq(dev, data->id_det_irq, data);
        if (data->vbus_det_irq > 0)
                devm_free_irq(dev, data->vbus_det_irq, data);

        cancel_delayed_work_sync(&data->detect);

        return 0;
}

static const unsigned int sun4i_usb_phy0_cable[] = {
        EXTCON_USB,
        EXTCON_USB_HOST,
        EXTCON_NONE,
};

static int sun4i_usb_phy_probe(struct platform_device *pdev)
{
        struct sun4i_usb_phy_data *data;
        struct device *dev = &pdev->dev;
        struct device_node *np = dev->of_node;
        struct phy_provider *phy_provider;
        struct resource *res;
        int i, ret;

        data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
        if (!data)
                return -ENOMEM;

        spin_lock_init(&data->reg_lock);
        INIT_DELAYED_WORK(&data->detect, sun4i_usb_phy0_id_vbus_det_scan);
        dev_set_drvdata(dev, data);
        data->cfg = of_device_get_match_data(dev);
        if (!data->cfg)
                return -EINVAL;

        res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
        data->base = devm_ioremap_resource(dev, res);
        if (IS_ERR(data->base))
                return PTR_ERR(data->base);

        data->id_det_gpio = devm_gpiod_get_optional(dev, "usb0_id_det",
                                                    GPIOD_IN);
        if (IS_ERR(data->id_det_gpio)) {
                dev_err(dev, "Couldn't request ID GPIO\n");
                return PTR_ERR(data->id_det_gpio);
        }

        data->vbus_det_gpio = devm_gpiod_get_optional(dev, "usb0_vbus_det",
                                                      GPIOD_IN);
        if (IS_ERR(data->vbus_det_gpio)) {
                dev_err(dev, "Couldn't request VBUS detect GPIO\n");
                return PTR_ERR(data->vbus_det_gpio);
        }

        if (of_find_property(np, "usb0_vbus_power-supply", NULL)) {
                data->vbus_power_supply = devm_power_supply_get_by_phandle(dev,
                                                     "usb0_vbus_power-supply");
                if (IS_ERR(data->vbus_power_supply)) {
                        dev_err(dev, "Couldn't get the VBUS power supply\n");
                        return PTR_ERR(data->vbus_power_supply);
                }

                if (!data->vbus_power_supply)
                        return -EPROBE_DEFER;
        }

        data->dr_mode = of_usb_get_dr_mode_by_phy(np, 0);

        data->extcon = devm_extcon_dev_allocate(dev, sun4i_usb_phy0_cable);
        if (IS_ERR(data->extcon)) {
                dev_err(dev, "Couldn't allocate our extcon device\n");
                return PTR_ERR(data->extcon);
        }

        ret = devm_extcon_dev_register(dev, data->extcon);
        if (ret) {
                dev_err(dev, "failed to register extcon: %d\n", ret);
                return ret;
        }

        for (i = 0; i < data->cfg->num_phys; i++) {
                struct sun4i_usb_phy *phy = data->phys + i;
                char name[16];

                if (data->cfg->missing_phys & BIT(i))
                        continue;

                snprintf(name, sizeof(name), "usb%d_vbus", i);
                phy->vbus = devm_regulator_get_optional(dev, name);
                if (IS_ERR(phy->vbus)) {
                        if (PTR_ERR(phy->vbus) == -EPROBE_DEFER) {
                                dev_err(dev,
                                        "Couldn't get regulator %s... Deferring probe\n",
                                        name);
                                return -EPROBE_DEFER;
                        }

                        phy->vbus = NULL;
                }

                if (data->cfg->dedicated_clocks)
                        snprintf(name, sizeof(name), "usb%d_phy", i);
                else
                        strlcpy(name, "usb_phy", sizeof(name));

                phy->clk = devm_clk_get(dev, name);
                if (IS_ERR(phy->clk)) {
                        dev_err(dev, "failed to get clock %s\n", name);
                        return PTR_ERR(phy->clk);
                }

                /* The first PHY is always tied to OTG, and never HSIC */
                if (data->cfg->hsic_index && i == data->cfg->hsic_index) {
                        /* HSIC needs secondary clock */
                        snprintf(name, sizeof(name), "usb%d_hsic_12M", i);
                        phy->clk2 = devm_clk_get(dev, name);
                        if (IS_ERR(phy->clk2)) {
                                dev_err(dev, "failed to get clock %s\n", name);
                                return PTR_ERR(phy->clk2);
                        }
                }

                snprintf(name, sizeof(name), "usb%d_reset", i);
                phy->reset = devm_reset_control_get(dev, name);
                if (IS_ERR(phy->reset)) {
                        dev_err(dev, "failed to get reset %s\n", name);
                        return PTR_ERR(phy->reset);
                }

                if (i || data->cfg->phy0_dual_route) { /* No pmu for musb */
                        snprintf(name, sizeof(name), "pmu%d", i);
                        res = platform_get_resource_byname(pdev,
                                                        IORESOURCE_MEM, name);
                        phy->pmu = devm_ioremap_resource(dev, res);
                        if (IS_ERR(phy->pmu))
                                return PTR_ERR(phy->pmu);
                }

                phy->phy = devm_phy_create(dev, NULL, &sun4i_usb_phy_ops);
                if (IS_ERR(phy->phy)) {
                        dev_err(dev, "failed to create PHY %d\n", i);
                        return PTR_ERR(phy->phy);
                }

                phy->index = i;
                phy_set_drvdata(phy->phy, &data->phys[i]);
        }

        data->id_det_irq = gpiod_to_irq(data->id_det_gpio);
        if (data->id_det_irq > 0) {
                ret = devm_request_irq(dev, data->id_det_irq,
                                sun4i_usb_phy0_id_vbus_det_irq,
                                IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
                                "usb0-id-det", data);
                if (ret) {
                        dev_err(dev, "Err requesting id-det-irq: %d\n", ret);
                        return ret;
                }
        }

        data->vbus_det_irq = gpiod_to_irq(data->vbus_det_gpio);
        if (data->vbus_det_irq > 0) {
                ret = devm_request_irq(dev, data->vbus_det_irq,
                                sun4i_usb_phy0_id_vbus_det_irq,
                                IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
                                "usb0-vbus-det", data);
                if (ret) {
                        dev_err(dev, "Err requesting vbus-det-irq: %d\n", ret);
                        data->vbus_det_irq = -1;
                        sun4i_usb_phy_remove(pdev); /* Stop detect work */
                        return ret;
                }
        }

        if (data->vbus_power_supply) {
                data->vbus_power_nb.notifier_call = sun4i_usb_phy0_vbus_notify;
                data->vbus_power_nb.priority = 0;
                ret = power_supply_reg_notifier(&data->vbus_power_nb);
                if (ret) {
                        sun4i_usb_phy_remove(pdev); /* Stop detect work */
                        return ret;
                }
                data->vbus_power_nb_registered = true;
        }

        phy_provider = devm_of_phy_provider_register(dev, sun4i_usb_phy_xlate);
        if (IS_ERR(phy_provider)) {
                sun4i_usb_phy_remove(pdev); /* Stop detect work */
                return PTR_ERR(phy_provider);
        }

        dev_dbg(dev, "successfully loaded\n");

        return 0;
}

static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
        .num_phys = 3,
        .type = sun4i_a10_phy,
        .disc_thresh = 3,
        .phyctl_offset = REG_PHYCTL_A10,
        .dedicated_clocks = false,
        .enable_pmu_unk1 = false,
};

static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
        .num_phys = 2,
        .type = sun4i_a10_phy,
        .disc_thresh = 2,
        .phyctl_offset = REG_PHYCTL_A10,
        .dedicated_clocks = false,
        .enable_pmu_unk1 = false,
};

static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
        .num_phys = 3,
        .type = sun6i_a31_phy,
        .disc_thresh = 3,
        .phyctl_offset = REG_PHYCTL_A10,
        .dedicated_clocks = true,
        .enable_pmu_unk1 = false,
};

static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
        .num_phys = 3,
        .type = sun4i_a10_phy,
        .disc_thresh = 2,
        .phyctl_offset = REG_PHYCTL_A10,
        .dedicated_clocks = false,
        .enable_pmu_unk1 = false,
};

static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
        .num_phys = 2,
        .type = sun6i_a31_phy,
        .disc_thresh = 3,
        .phyctl_offset = REG_PHYCTL_A10,
        .dedicated_clocks = true,
        .enable_pmu_unk1 = false,
};

static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
        .num_phys = 2,
        .type = sun8i_a33_phy,
        .disc_thresh = 3,
        .phyctl_offset = REG_PHYCTL_A33,
        .dedicated_clocks = true,
        .enable_pmu_unk1 = false,
};

static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = {
        .num_phys = 3,
        .hsic_index = 2,
        .type = sun8i_a83t_phy,
        .phyctl_offset = REG_PHYCTL_A33,
        .dedicated_clocks = true,
};

static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
        .num_phys = 4,
        .type = sun8i_h3_phy,
        .disc_thresh = 3,
        .phyctl_offset = REG_PHYCTL_A33,
        .dedicated_clocks = true,
        .enable_pmu_unk1 = true,
        .phy0_dual_route = true,
};

static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = {
        .num_phys = 3,
        .type = sun8i_r40_phy,
        .disc_thresh = 3,
        .phyctl_offset = REG_PHYCTL_A33,
        .dedicated_clocks = true,
        .enable_pmu_unk1 = true,
        .phy0_dual_route = true,
};

static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = {
        .num_phys = 1,
        .type = sun8i_v3s_phy,
        .disc_thresh = 3,
        .phyctl_offset = REG_PHYCTL_A33,
        .dedicated_clocks = true,
        .enable_pmu_unk1 = true,
        .phy0_dual_route = true,
};

static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
        .num_phys = 2,
        .type = sun50i_a64_phy,
        .disc_thresh = 3,
        .phyctl_offset = REG_PHYCTL_A33,
        .dedicated_clocks = true,
        .enable_pmu_unk1 = true,
        .phy0_dual_route = true,
};

static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = {
        .num_phys = 4,
        .type = sun50i_h6_phy,
        .disc_thresh = 3,
        .phyctl_offset = REG_PHYCTL_A33,
        .dedicated_clocks = true,
        .enable_pmu_unk1 = true,
        .phy0_dual_route = true,
        .missing_phys = BIT(1) | BIT(2),
};

static const struct of_device_id sun4i_usb_phy_of_match[] = {
        { .compatible = "allwinner,sun4i-a10-usb-phy", .data = &sun4i_a10_cfg },
        { .compatible = "allwinner,sun5i-a13-usb-phy", .data = &sun5i_a13_cfg },
        { .compatible = "allwinner,sun6i-a31-usb-phy", .data = &sun6i_a31_cfg },
        { .compatible = "allwinner,sun7i-a20-usb-phy", .data = &sun7i_a20_cfg },
        { .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
        { .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
        { .compatible = "allwinner,sun8i-a83t-usb-phy", .data = &sun8i_a83t_cfg },
        { .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
        { .compatible = "allwinner,sun8i-r40-usb-phy", .data = &sun8i_r40_cfg },
        { .compatible = "allwinner,sun8i-v3s-usb-phy", .data = &sun8i_v3s_cfg },
        { .compatible = "allwinner,sun50i-a64-usb-phy",
          .data = &sun50i_a64_cfg},
        { .compatible = "allwinner,sun50i-h6-usb-phy", .data = &sun50i_h6_cfg },
        { },
};
MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);

static struct platform_driver sun4i_usb_phy_driver = {
        .probe  = sun4i_usb_phy_probe,
        .remove = sun4i_usb_phy_remove,
        .driver = {
                .of_match_table = sun4i_usb_phy_of_match,
                .name  = "sun4i-usb-phy",
        }
};
module_platform_driver(sun4i_usb_phy_driver);

MODULE_DESCRIPTION("Allwinner sun4i USB phy driver");
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
MODULE_LICENSE("GPL v2");