drivers/phy/phy-rcar-gen3-usb2.c

   1 /*
   2  * Renesas R-Car Gen3 for USB2.0 PHY driver
   3  *
   4  * Copyright (C) 2015 Renesas Electronics Corporation
   5  *
   6  * This is based on the phy-rcar-gen2 driver:
   7  * Copyright (C) 2014 Renesas Solutions Corp.
   8  * Copyright (C) 2014 Cogent Embedded, Inc.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  */
  14
  15 #include <linux/extcon.h>
  16 #include <linux/interrupt.h>
  17 #include <linux/io.h>
  18 #include <linux/module.h>
  19 #include <linux/of.h>
  20 #include <linux/of_address.h>
  21 #include <linux/phy/phy.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/regulator/consumer.h>
  24 #include <linux/workqueue.h>
  25
  26 /******* USB2.0 Host registers (original offset is +0x200) *******/
  27 #define USB2_INT_ENABLE         0x000
  28 #define USB2_USBCTR             0x00c
  29 #define USB2_SPD_RSM_TIMSET     0x10c
  30 #define USB2_OC_TIMSET          0x110
  31 #define USB2_COMMCTRL           0x600
  32 #define USB2_OBINTSTA           0x604
  33 #define USB2_OBINTEN            0x608
  34 #define USB2_VBCTRL             0x60c
  35 #define USB2_LINECTRL1          0x610
  36 #define USB2_ADPCTRL            0x630
  37
  38 /* INT_ENABLE */
  39 #define USB2_INT_ENABLE_UCOM_INTEN      BIT(3)
  40 #define USB2_INT_ENABLE_USBH_INTB_EN    BIT(2)
  41 #define USB2_INT_ENABLE_USBH_INTA_EN    BIT(1)
  42 #define USB2_INT_ENABLE_INIT            (USB2_INT_ENABLE_UCOM_INTEN | \
  43                                          USB2_INT_ENABLE_USBH_INTB_EN | \
  44                                          USB2_INT_ENABLE_USBH_INTA_EN)
  45
  46 /* USBCTR */
  47 #define USB2_USBCTR_DIRPD       BIT(2)
  48 #define USB2_USBCTR_PLL_RST     BIT(1)
  49
  50 /* SPD_RSM_TIMSET */
  51 #define USB2_SPD_RSM_TIMSET_INIT        0x014e029b
  52
  53 /* OC_TIMSET */
  54 #define USB2_OC_TIMSET_INIT             0x000209ab
  55
  56 /* COMMCTRL */
  57 #define USB2_COMMCTRL_OTG_PERI          BIT(31) /* 1 = Peripheral mode */
  58
  59 /* OBINTSTA and OBINTEN */
  60 #define USB2_OBINT_SESSVLDCHG           BIT(12)
  61 #define USB2_OBINT_IDDIGCHG             BIT(11)
  62 #define USB2_OBINT_BITS                 (USB2_OBINT_SESSVLDCHG | \
  63                                          USB2_OBINT_IDDIGCHG)
  64
  65 /* VBCTRL */
  66 #define USB2_VBCTRL_DRVVBUSSEL          BIT(8)
  67
  68 /* LINECTRL1 */
  69 #define USB2_LINECTRL1_DPRPD_EN         BIT(19)
  70 #define USB2_LINECTRL1_DP_RPD           BIT(18)
  71 #define USB2_LINECTRL1_DMRPD_EN         BIT(17)
  72 #define USB2_LINECTRL1_DM_RPD           BIT(16)
  73 #define USB2_LINECTRL1_OPMODE_NODRV     BIT(6)
  74
  75 /* ADPCTRL */
  76 #define USB2_ADPCTRL_OTGSESSVLD         BIT(20)
  77 #define USB2_ADPCTRL_IDDIG              BIT(19)
  78 #define USB2_ADPCTRL_IDPULLUP           BIT(5)  /* 1 = ID sampling is enabled */
  79 #define USB2_ADPCTRL_DRVVBUS            BIT(4)
  80
  81 struct rcar_gen3_chan {
  82         void __iomem *base;
  83         struct extcon_dev *extcon;
  84         struct phy *phy;
  85         struct regulator *vbus;
  86         struct work_struct work;
  87         bool extcon_host;
  88         bool has_otg;
  89 };
  90
  91 static void rcar_gen3_phy_usb2_work(struct work_struct *work)
  92 {
  93         struct rcar_gen3_chan *ch = container_of(work, struct rcar_gen3_chan,
  94                                                  work);
  95
  96         if (ch->extcon_host) {
  97                 extcon_set_cable_state_(ch->extcon, EXTCON_USB_HOST, true);
  98                 extcon_set_cable_state_(ch->extcon, EXTCON_USB, false);
  99         } else {
 100                 extcon_set_cable_state_(ch->extcon, EXTCON_USB_HOST, false);
 101                 extcon_set_cable_state_(ch->extcon, EXTCON_USB, true);
 102         }
 103 }
 104
 105 static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
 106 {
 107         void __iomem *usb2_base = ch->base;
 108         u32 val = readl(usb2_base + USB2_COMMCTRL);
 109
 110         dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, host);
 111         if (host)
 112                 val &= ~USB2_COMMCTRL_OTG_PERI;
 113         else
 114                 val |= USB2_COMMCTRL_OTG_PERI;
 115         writel(val, usb2_base + USB2_COMMCTRL);
 116 }
 117
 118 static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
 119 {
 120         void __iomem *usb2_base = ch->base;
 121         u32 val = readl(usb2_base + USB2_LINECTRL1);
 122
 123         dev_vdbg(&ch->phy->dev, "%s: %08x, %d, %d\n", __func__, val, dp, dm);
 124         val &= ~(USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD);
 125         if (dp)
 126                 val |= USB2_LINECTRL1_DP_RPD;
 127         if (dm)
 128                 val |= USB2_LINECTRL1_DM_RPD;
 129         writel(val, usb2_base + USB2_LINECTRL1);
 130 }
 131
 132 static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
 133 {
 134         void __iomem *usb2_base = ch->base;
 135         u32 val = readl(usb2_base + USB2_ADPCTRL);
 136
 137         dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, vbus);
 138         if (vbus)
 139                 val |= USB2_ADPCTRL_DRVVBUS;
 140         else
 141                 val &= ~USB2_ADPCTRL_DRVVBUS;
 142         writel(val, usb2_base + USB2_ADPCTRL);
 143 }
 144
 145 static void rcar_gen3_init_for_host(struct rcar_gen3_chan *ch)
 146 {
 147         rcar_gen3_set_linectrl(ch, 1, 1);
 148         rcar_gen3_set_host_mode(ch, 1);
 149         rcar_gen3_enable_vbus_ctrl(ch, 1);
 150
 151         ch->extcon_host = true;
 152         schedule_work(&ch->work);
 153 }
 154
 155 static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
 156 {
 157         rcar_gen3_set_linectrl(ch, 0, 1);
 158         rcar_gen3_set_host_mode(ch, 0);
 159         rcar_gen3_enable_vbus_ctrl(ch, 0);
 160
 161         ch->extcon_host = false;
 162         schedule_work(&ch->work);
 163 }
 164
 165 static void rcar_gen3_init_for_b_host(struct rcar_gen3_chan *ch)
 166 {
 167         void __iomem *usb2_base = ch->base;
 168         u32 val;
 169
 170         val = readl(usb2_base + USB2_LINECTRL1);
 171         writel(val | USB2_LINECTRL1_OPMODE_NODRV, usb2_base + USB2_LINECTRL1);
 172
 173         rcar_gen3_set_linectrl(ch, 1, 1);
 174         rcar_gen3_set_host_mode(ch, 1);
 175         rcar_gen3_enable_vbus_ctrl(ch, 0);
 176
 177         val = readl(usb2_base + USB2_LINECTRL1);
 178         writel(val & ~USB2_LINECTRL1_OPMODE_NODRV, usb2_base + USB2_LINECTRL1);
 179 }
 180
 181 static void rcar_gen3_init_for_a_peri(struct rcar_gen3_chan *ch)
 182 {
 183         rcar_gen3_set_linectrl(ch, 0, 1);
 184         rcar_gen3_set_host_mode(ch, 0);
 185         rcar_gen3_enable_vbus_ctrl(ch, 1);
 186 }
 187
 188 static void rcar_gen3_init_from_a_peri_to_a_host(struct rcar_gen3_chan *ch)
 189 {
 190         void __iomem *usb2_base = ch->base;
 191         u32 val;
 192
 193         val = readl(usb2_base + USB2_OBINTEN);
 194         writel(val & ~USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
 195
 196         rcar_gen3_enable_vbus_ctrl(ch, 0);
 197         rcar_gen3_init_for_host(ch);
 198
 199         writel(val | USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
 200 }
 201
 202 static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
 203 {
 204         return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
 205 }
 206
 207 static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch)
 208 {
 209         if (!rcar_gen3_check_id(ch))
 210                 rcar_gen3_init_for_host(ch);
 211         else
 212                 rcar_gen3_init_for_peri(ch);
 213 }
 214
 215 static bool rcar_gen3_is_host(struct rcar_gen3_chan *ch)
 216 {
 217         return !(readl(ch->base + USB2_COMMCTRL) & USB2_COMMCTRL_OTG_PERI);
 218 }
 219
 220 static ssize_t role_store(struct device *dev, struct device_attribute *attr,
 221                           const char *buf, size_t count)
 222 {
 223         struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
 224         bool is_b_device, is_host, new_mode_is_host;
 225
 226         if (!ch->has_otg || !ch->phy->init_count)
 227                 return -EIO;
 228
 229         /*
 230          * is_b_device: true is B-Device. false is A-Device.
 231          * If {new_mode_}is_host: true is Host mode. false is Peripheral mode.
 232          */
 233         is_b_device = rcar_gen3_check_id(ch);
 234         is_host = rcar_gen3_is_host(ch);
 235         if (!strncmp(buf, "host", strlen("host")))
 236                 new_mode_is_host = true;
 237         else if (!strncmp(buf, "peripheral", strlen("peripheral")))
 238                 new_mode_is_host = false;
 239         else
 240                 return -EINVAL;
 241
 242         /* If current and new mode is the same, this returns the error */
 243         if (is_host == new_mode_is_host)
 244                 return -EINVAL;
 245
 246         if (new_mode_is_host) {         /* And is_host must be false */
 247                 if (!is_b_device)       /* A-Peripheral */
 248                         rcar_gen3_init_from_a_peri_to_a_host(ch);
 249                 else                    /* B-Peripheral */
 250                         rcar_gen3_init_for_b_host(ch);
 251         } else {                        /* And is_host must be true */
 252                 if (!is_b_device)       /* A-Host */
 253                         rcar_gen3_init_for_a_peri(ch);
 254                 else                    /* B-Host */
 255                         rcar_gen3_init_for_peri(ch);
 256         }
 257
 258         return count;
 259 }
 260
 261 static ssize_t role_show(struct device *dev, struct device_attribute *attr,
 262                          char *buf)
 263 {
 264         struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
 265
 266         if (!ch->has_otg || !ch->phy->init_count)
 267                 return -EIO;
 268
 269         return sprintf(buf, "%s\n", rcar_gen3_is_host(ch) ? "host" :
 270                                                             "peripheral");
 271 }
 272 static DEVICE_ATTR_RW(role);
 273
 274 static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
 275 {
 276         void __iomem *usb2_base = ch->base;
 277         u32 val;
 278
 279         val = readl(usb2_base + USB2_VBCTRL);
 280         writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
 281         writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
 282         val = readl(usb2_base + USB2_OBINTEN);
 283         writel(val | USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
 284         val = readl(usb2_base + USB2_ADPCTRL);
 285         writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
 286         val = readl(usb2_base + USB2_LINECTRL1);
 287         rcar_gen3_set_linectrl(ch, 0, 0);
 288         writel(val | USB2_LINECTRL1_DPRPD_EN | USB2_LINECTRL1_DMRPD_EN,
 289                usb2_base + USB2_LINECTRL1);
 290
 291         rcar_gen3_device_recognition(ch);
 292 }
 293
 294 static int rcar_gen3_phy_usb2_init(struct phy *p)
 295 {
 296         struct rcar_gen3_chan *channel = phy_get_drvdata(p);
 297         void __iomem *usb2_base = channel->base;
 298
 299         /* Initialize USB2 part */
 300         writel(USB2_INT_ENABLE_INIT, usb2_base + USB2_INT_ENABLE);
 301         writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET);
 302         writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET);
 303
 304         /* Initialize otg part */
 305         if (channel->has_otg)
 306                 rcar_gen3_init_otg(channel);
 307
 308         return 0;
 309 }
 310
 311 static int rcar_gen3_phy_usb2_exit(struct phy *p)
 312 {
 313         struct rcar_gen3_chan *channel = phy_get_drvdata(p);
 314
 315         writel(0, channel->base + USB2_INT_ENABLE);
 316
 317         return 0;
 318 }
 319
 320 static int rcar_gen3_phy_usb2_power_on(struct phy *p)
 321 {
 322         struct rcar_gen3_chan *channel = phy_get_drvdata(p);
 323         void __iomem *usb2_base = channel->base;
 324         u32 val;
 325         int ret;
 326
 327         if (channel->vbus) {
 328                 ret = regulator_enable(channel->vbus);
 329                 if (ret)
 330                         return ret;
 331         }
 332
 333         val = readl(usb2_base + USB2_USBCTR);
 334         val |= USB2_USBCTR_PLL_RST;
 335         writel(val, usb2_base + USB2_USBCTR);
 336         val &= ~USB2_USBCTR_PLL_RST;
 337         writel(val, usb2_base + USB2_USBCTR);
 338
 339         return 0;
 340 }
 341
 342 static int rcar_gen3_phy_usb2_power_off(struct phy *p)
 343 {
 344         struct rcar_gen3_chan *channel = phy_get_drvdata(p);
 345         int ret = 0;
 346
 347         if (channel->vbus)
 348                 ret = regulator_disable(channel->vbus);
 349
 350         return ret;
 351 }
 352
 353 static struct phy_ops rcar_gen3_phy_usb2_ops = {
 354         .init           = rcar_gen3_phy_usb2_init,
 355         .exit           = rcar_gen3_phy_usb2_exit,
 356         .power_on       = rcar_gen3_phy_usb2_power_on,
 357         .power_off      = rcar_gen3_phy_usb2_power_off,
 358         .owner          = THIS_MODULE,
 359 };
 360
 361 static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
 362 {
 363         struct rcar_gen3_chan *ch = _ch;
 364         void __iomem *usb2_base = ch->base;
 365         u32 status = readl(usb2_base + USB2_OBINTSTA);
 366         irqreturn_t ret = IRQ_NONE;
 367
 368         if (status & USB2_OBINT_BITS) {
 369                 dev_vdbg(&ch->phy->dev, "%s: %08x\n", __func__, status);
 370                 writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
 371                 rcar_gen3_device_recognition(ch);
 372                 ret = IRQ_HANDLED;
 373         }
 374
 375         return ret;
 376 }
 377
 378 static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
 379         { .compatible = "renesas,usb2-phy-r8a7795" },
 380         { .compatible = "renesas,usb2-phy-r8a7796" },
 381         { .compatible = "renesas,rcar-gen3-usb2-phy" },
 382         { }
 383 };
 384 MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
 385
 386 static const unsigned int rcar_gen3_phy_cable[] = {
 387         EXTCON_USB,
 388         EXTCON_USB_HOST,
 389         EXTCON_NONE,
 390 };
 391
 392 static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 393 {
 394         struct device *dev = &pdev->dev;
 395         struct rcar_gen3_chan *channel;
 396         struct phy_provider *provider;
 397         struct resource *res;
 398         int irq;
 399
 400         if (!dev->of_node) {
 401                 dev_err(dev, "This driver needs device tree\n");
 402                 return -EINVAL;
 403         }
 404
 405         channel = devm_kzalloc(dev, sizeof(*channel), GFP_KERNEL);
 406         if (!channel)
 407                 return -ENOMEM;
 408
 409         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 410         channel->base = devm_ioremap_resource(dev, res);
 411         if (IS_ERR(channel->base))
 412                 return PTR_ERR(channel->base);
 413
 414         /* call request_irq for OTG */
 415         irq = platform_get_irq(pdev, 0);
 416         if (irq >= 0) {
 417                 int ret;
 418
 419                 INIT_WORK(&channel->work, rcar_gen3_phy_usb2_work);
 420                 irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
 421                                        IRQF_SHARED, dev_name(dev), channel);
 422                 if (irq < 0)
 423                         dev_err(dev, "No irq handler (%d)\n", irq);
 424                 channel->has_otg = true;
 425                 channel->extcon = devm_extcon_dev_allocate(dev,
 426                                                         rcar_gen3_phy_cable);
 427                 if (IS_ERR(channel->extcon))
 428                         return PTR_ERR(channel->extcon);
 429
 430                 ret = devm_extcon_dev_register(dev, channel->extcon);
 431                 if (ret < 0) {
 432                         dev_err(dev, "Failed to register extcon\n");
 433                         return ret;
 434                 }
 435         }
 436
 437         /* devm_phy_create() will call pm_runtime_enable(dev); */
 438         channel->phy = devm_phy_create(dev, NULL, &rcar_gen3_phy_usb2_ops);
 439         if (IS_ERR(channel->phy)) {
 440                 dev_err(dev, "Failed to create USB2 PHY\n");
 441                 return PTR_ERR(channel->phy);
 442         }
 443
 444         channel->vbus = devm_regulator_get_optional(dev, "vbus");
 445         if (IS_ERR(channel->vbus)) {
 446                 if (PTR_ERR(channel->vbus) == -EPROBE_DEFER)
 447                         return PTR_ERR(channel->vbus);
 448                 channel->vbus = NULL;
 449         }
 450
 451         platform_set_drvdata(pdev, channel);
 452         phy_set_drvdata(channel->phy, channel);
 453
 454         provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 455         if (IS_ERR(provider)) {
 456                 dev_err(dev, "Failed to register PHY provider\n");
 457         } else if (channel->has_otg) {
 458                 int ret;
 459
 460                 ret = device_create_file(dev, &dev_attr_role);
 461                 if (ret < 0)
 462                         return ret;
 463         }
 464
 465         return PTR_ERR_OR_ZERO(provider);
 466 }
 467
 468 static int rcar_gen3_phy_usb2_remove(struct platform_device *pdev)
 469 {
 470         struct rcar_gen3_chan *channel = platform_get_drvdata(pdev);
 471
 472         if (channel->has_otg)
 473                 device_remove_file(&pdev->dev, &dev_attr_role);
 474
 475         return 0;
 476 };
 477
 478 static struct platform_driver rcar_gen3_phy_usb2_driver = {
 479         .driver = {
 480                 .name           = "phy_rcar_gen3_usb2",
 481                 .of_match_table = rcar_gen3_phy_usb2_match_table,
 482         },
 483         .probe  = rcar_gen3_phy_usb2_probe,
 484         .remove = rcar_gen3_phy_usb2_remove,
 485 };
 486 module_platform_driver(rcar_gen3_phy_usb2_driver);
 487
 488 MODULE_LICENSE("GPL v2");
 489 MODULE_DESCRIPTION("Renesas R-Car Gen3 USB 2.0 PHY");
 490 MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>");