drivers/pinctrl/Kconfig

   1 #
   2 # PINCTRL infrastructure and drivers
   3 #
   4
   5 config PINCTRL
   6         bool
   7
   8 menu "Pin controllers"
   9         depends on PINCTRL
  10
  11 config PINMUX
  12         bool "Support pin multiplexing controllers" if COMPILE_TEST
  13
  14 config PINCONF
  15         bool "Support pin configuration controllers" if COMPILE_TEST
  16
  17 config GENERIC_PINCONF
  18         bool
  19         select PINCONF
  20
  21 config DEBUG_PINCTRL
  22         bool "Debug PINCTRL calls"
  23         depends on DEBUG_KERNEL
  24         help
  25           Say Y here to add some extra checks and diagnostics to PINCTRL calls.
  26
  27 config PINCTRL_ADI2
  28         bool "ADI pin controller driver"
  29         depends on BLACKFIN
  30         select PINMUX
  31         select IRQ_DOMAIN
  32         help
  33           This is the pin controller and gpio driver for ADI BF54x, BF60x and
  34           future processors. This option is selected automatically when specific
  35           machine and arch are selected to build.
  36
  37 config PINCTRL_AS3722
  38         bool "Pinctrl and GPIO driver for ams AS3722 PMIC"
  39         depends on MFD_AS3722 && GPIOLIB
  40         select PINMUX
  41         select GENERIC_PINCONF
  42         help
  43           AS3722 device supports the configuration of GPIO pins for different
  44           functionality. This driver supports the pinmux, push-pull and
  45           open drain configuration for the GPIO pins of AS3722 devices. It also
  46           supports the GPIO functionality through gpiolib.
  47
  48 config PINCTRL_BF54x
  49         def_bool y if BF54x
  50         select PINCTRL_ADI2
  51
  52 config PINCTRL_BF60x
  53         def_bool y if BF60x
  54         select PINCTRL_ADI2
  55
  56 config PINCTRL_AT91
  57         bool "AT91 pinctrl driver"
  58         depends on OF
  59         depends on ARCH_AT91
  60         select PINMUX
  61         select PINCONF
  62         select GPIOLIB
  63         select OF_GPIO
  64         select GPIOLIB_IRQCHIP
  65         help
  66           Say Y here to enable the at91 pinctrl driver
  67
  68 config PINCTRL_AT91PIO4
  69         bool "AT91 PIO4 pinctrl driver"
  70         depends on OF
  71         depends on ARCH_AT91
  72         select PINMUX
  73         select GENERIC_PINCONF
  74         select GPIOLIB
  75         select GPIOLIB_IRQCHIP
  76         select OF_GPIO
  77         help
  78           Say Y here to enable the at91 pinctrl/gpio driver for Atmel PIO4
  79           controller available on sama5d2 SoC.
  80
  81 config PINCTRL_AMD
  82         tristate "AMD GPIO pin control"
  83         depends on GPIOLIB
  84         select GPIOLIB_IRQCHIP
  85         select PINCONF
  86         select GENERIC_PINCONF
  87         help
  88           driver for memory mapped GPIO functionality on AMD platforms
  89           (x86 or arm).Most pins are usually muxed to some other
  90           functionality by firmware,so only a small amount is available
  91           for gpio use.
  92
  93           Requires ACPI/FDT device enumeration code to set up a platform
  94           device.
  95
  96 config PINCTRL_DIGICOLOR
  97         bool
  98         depends on OF && (ARCH_DIGICOLOR || COMPILE_TEST)
  99         select PINMUX
 100         select GENERIC_PINCONF
 101
 102 config PINCTRL_LANTIQ
 103         bool
 104         depends on LANTIQ
 105         select PINMUX
 106         select PINCONF
 107
 108 config PINCTRL_LPC18XX
 109         bool "NXP LPC18XX/43XX SCU pinctrl driver"
 110         depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
 111         default ARCH_LPC18XX
 112         select PINMUX
 113         select GENERIC_PINCONF
 114         help
 115           Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU).
 116
 117 config PINCTRL_FALCON
 118         bool
 119         depends on SOC_FALCON
 120         depends on PINCTRL_LANTIQ
 121
 122 config PINCTRL_MESON
 123         bool
 124         depends on OF
 125         select PINMUX
 126         select PINCONF
 127         select GENERIC_PINCONF
 128         select GPIOLIB
 129         select OF_GPIO
 130         select REGMAP_MMIO
 131
 132 config PINCTRL_ROCKCHIP
 133         bool
 134         select PINMUX
 135         select GENERIC_PINCONF
 136         select GENERIC_IRQ_CHIP
 137         select MFD_SYSCON
 138
 139 config PINCTRL_SINGLE
 140         tristate "One-register-per-pin type device tree based pinctrl driver"
 141         depends on OF
 142         select PINMUX
 143         select PINCONF
 144         select GENERIC_PINCONF
 145         help
 146           This selects the device tree based generic pinctrl driver.
 147
 148 config PINCTRL_SIRF
 149         bool "CSR SiRFprimaII pin controller driver"
 150         depends on ARCH_SIRF
 151         select PINMUX
 152         select PINCONF
 153         select GENERIC_PINCONF
 154         select GPIOLIB_IRQCHIP
 155
 156 config PINCTRL_PISTACHIO
 157         def_bool y if MACH_PISTACHIO
 158         depends on GPIOLIB
 159         select PINMUX
 160         select GENERIC_PINCONF
 161         select GPIOLIB_IRQCHIP
 162         select OF_GPIO
 163
 164 config PINCTRL_ST
 165         bool
 166         depends on OF
 167         select PINMUX
 168         select PINCONF
 169         select GPIOLIB_IRQCHIP
 170
 171 config PINCTRL_TZ1090
 172         bool "Toumaz Xenif TZ1090 pin control driver"
 173         depends on SOC_TZ1090
 174         select PINMUX
 175         select GENERIC_PINCONF
 176
 177 config PINCTRL_TZ1090_PDC
 178         bool "Toumaz Xenif TZ1090 PDC pin control driver"
 179         depends on SOC_TZ1090
 180         select PINMUX
 181         select PINCONF
 182
 183 config PINCTRL_U300
 184         bool "U300 pin controller driver"
 185         depends on ARCH_U300
 186         select PINMUX
 187         select GENERIC_PINCONF
 188
 189 config PINCTRL_COH901
 190         bool "ST-Ericsson U300 COH 901 335/571 GPIO"
 191         depends on GPIOLIB && ARCH_U300 && PINCTRL_U300
 192         select GPIOLIB_IRQCHIP
 193         help
 194           Say yes here to support GPIO interface on ST-Ericsson U300.
 195           The names of the two IP block variants supported are
 196           COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
 197           ports of 8 GPIO pins each.
 198
 199 config PINCTRL_PALMAS
 200         bool "Pinctrl driver for the PALMAS Series MFD devices"
 201         depends on OF && MFD_PALMAS
 202         select PINMUX
 203         select GENERIC_PINCONF
 204         help
 205           Palmas device supports the configuration of pins for different
 206           functionality. This driver supports the pinmux, push-pull and
 207           open drain configuration for the Palmas series devices like
 208           TPS65913, TPS80036 etc.
 209
 210 config PINCTRL_PIC32
 211         bool "Microchip PIC32 pin controller driver"
 212         depends on OF
 213         depends on MACH_PIC32
 214         select PINMUX
 215         select GENERIC_PINCONF
 216         select GPIOLIB_IRQCHIP
 217         select OF_GPIO
 218         help
 219           This is the pin controller and gpio driver for Microchip PIC32
 220           microcontrollers. This option is selected automatically when specific
 221           machine and arch are selected to build.
 222
 223 config PINCTRL_PIC32MZDA
 224         def_bool y if PIC32MZDA
 225         select PINCTRL_PIC32
 226
 227 config PINCTRL_ZYNQ
 228         bool "Pinctrl driver for Xilinx Zynq"
 229         depends on ARCH_ZYNQ
 230         select PINMUX
 231         select GENERIC_PINCONF
 232         help
 233           This selects the pinctrl driver for Xilinx Zynq.
 234
 235 source "drivers/pinctrl/bcm/Kconfig"
 236 source "drivers/pinctrl/berlin/Kconfig"
 237 source "drivers/pinctrl/freescale/Kconfig"
 238 source "drivers/pinctrl/intel/Kconfig"
 239 source "drivers/pinctrl/mvebu/Kconfig"
 240 source "drivers/pinctrl/nomadik/Kconfig"
 241 source "drivers/pinctrl/pxa/Kconfig"
 242 source "drivers/pinctrl/qcom/Kconfig"
 243 source "drivers/pinctrl/samsung/Kconfig"
 244 source "drivers/pinctrl/sh-pfc/Kconfig"
 245 source "drivers/pinctrl/spear/Kconfig"
 246 source "drivers/pinctrl/stm32/Kconfig"
 247 source "drivers/pinctrl/sunxi/Kconfig"
 248 source "drivers/pinctrl/tegra/Kconfig"
 249 source "drivers/pinctrl/uniphier/Kconfig"
 250 source "drivers/pinctrl/vt8500/Kconfig"
 251 source "drivers/pinctrl/mediatek/Kconfig"
 252
 253 config PINCTRL_XWAY
 254         bool
 255         depends on SOC_TYPE_XWAY
 256         depends on PINCTRL_LANTIQ
 257
 258 config PINCTRL_TB10X
 259         bool
 260         depends on OF && ARC_PLAT_TB10X
 261         select GPIOLIB
 262
 263 endmenu